|
@@ -70,11 +70,6 @@ static int modparam_all_channels;
|
|
|
module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
|
|
|
MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
|
|
|
|
|
|
-
|
|
|
-/******************\
|
|
|
-* Internal defines *
|
|
|
-\******************/
|
|
|
-
|
|
|
/* Module info */
|
|
|
MODULE_AUTHOR("Jiri Slaby");
|
|
|
MODULE_AUTHOR("Nick Kossifidis");
|
|
@@ -83,6 +78,10 @@ MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
|
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
|
|
|
|
|
|
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
|
|
|
+static int ath5k_beacon_update(struct ieee80211_hw *hw,
|
|
|
+ struct ieee80211_vif *vif);
|
|
|
+static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
|
|
|
|
|
|
/* Known PCI ids */
|
|
|
static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
|
|
@@ -190,129 +189,6 @@ static const struct ieee80211_rate ath5k_rates[] = {
|
|
|
/* XR missing */
|
|
|
};
|
|
|
|
|
|
-/*
|
|
|
- * Prototypes - PCI stack related functions
|
|
|
- */
|
|
|
-static int __devinit ath5k_pci_probe(struct pci_dev *pdev,
|
|
|
- const struct pci_device_id *id);
|
|
|
-static void __devexit ath5k_pci_remove(struct pci_dev *pdev);
|
|
|
-#ifdef CONFIG_PM_SLEEP
|
|
|
-static int ath5k_pci_suspend(struct device *dev);
|
|
|
-static int ath5k_pci_resume(struct device *dev);
|
|
|
-
|
|
|
-static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
|
|
|
-#define ATH5K_PM_OPS (&ath5k_pm_ops)
|
|
|
-#else
|
|
|
-#define ATH5K_PM_OPS NULL
|
|
|
-#endif /* CONFIG_PM_SLEEP */
|
|
|
-
|
|
|
-static struct pci_driver ath5k_pci_driver = {
|
|
|
- .name = KBUILD_MODNAME,
|
|
|
- .id_table = ath5k_pci_id_table,
|
|
|
- .probe = ath5k_pci_probe,
|
|
|
- .remove = __devexit_p(ath5k_pci_remove),
|
|
|
- .driver.pm = ATH5K_PM_OPS,
|
|
|
-};
|
|
|
-
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Prototypes - MAC 802.11 stack related functions
|
|
|
- */
|
|
|
-static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
|
|
|
-static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
|
|
|
- struct ath5k_txq *txq);
|
|
|
-static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
|
|
|
-static int ath5k_start(struct ieee80211_hw *hw);
|
|
|
-static void ath5k_stop(struct ieee80211_hw *hw);
|
|
|
-static int ath5k_add_interface(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_vif *vif);
|
|
|
-static void ath5k_remove_interface(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_vif *vif);
|
|
|
-static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
|
|
|
-static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
|
|
|
- struct netdev_hw_addr_list *mc_list);
|
|
|
-static void ath5k_configure_filter(struct ieee80211_hw *hw,
|
|
|
- unsigned int changed_flags,
|
|
|
- unsigned int *new_flags,
|
|
|
- u64 multicast);
|
|
|
-static int ath5k_set_key(struct ieee80211_hw *hw,
|
|
|
- enum set_key_cmd cmd,
|
|
|
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
|
|
|
- struct ieee80211_key_conf *key);
|
|
|
-static int ath5k_get_stats(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_low_level_stats *stats);
|
|
|
-static int ath5k_get_survey(struct ieee80211_hw *hw,
|
|
|
- int idx, struct survey_info *survey);
|
|
|
-static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
|
|
|
-static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf);
|
|
|
-static void ath5k_reset_tsf(struct ieee80211_hw *hw);
|
|
|
-static int ath5k_beacon_update(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_vif *vif);
|
|
|
-static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_vif *vif,
|
|
|
- struct ieee80211_bss_conf *bss_conf,
|
|
|
- u32 changes);
|
|
|
-static void ath5k_sw_scan_start(struct ieee80211_hw *hw);
|
|
|
-static void ath5k_sw_scan_complete(struct ieee80211_hw *hw);
|
|
|
-static void ath5k_set_coverage_class(struct ieee80211_hw *hw,
|
|
|
- u8 coverage_class);
|
|
|
-
|
|
|
-static const struct ieee80211_ops ath5k_hw_ops = {
|
|
|
- .tx = ath5k_tx,
|
|
|
- .start = ath5k_start,
|
|
|
- .stop = ath5k_stop,
|
|
|
- .add_interface = ath5k_add_interface,
|
|
|
- .remove_interface = ath5k_remove_interface,
|
|
|
- .config = ath5k_config,
|
|
|
- .prepare_multicast = ath5k_prepare_multicast,
|
|
|
- .configure_filter = ath5k_configure_filter,
|
|
|
- .set_key = ath5k_set_key,
|
|
|
- .get_stats = ath5k_get_stats,
|
|
|
- .get_survey = ath5k_get_survey,
|
|
|
- .conf_tx = NULL,
|
|
|
- .get_tsf = ath5k_get_tsf,
|
|
|
- .set_tsf = ath5k_set_tsf,
|
|
|
- .reset_tsf = ath5k_reset_tsf,
|
|
|
- .bss_info_changed = ath5k_bss_info_changed,
|
|
|
- .sw_scan_start = ath5k_sw_scan_start,
|
|
|
- .sw_scan_complete = ath5k_sw_scan_complete,
|
|
|
- .set_coverage_class = ath5k_set_coverage_class,
|
|
|
-};
|
|
|
-
|
|
|
-/*
|
|
|
- * Prototypes - Internal functions
|
|
|
- */
|
|
|
-/* Attach detach */
|
|
|
-static int ath5k_attach(struct pci_dev *pdev,
|
|
|
- struct ieee80211_hw *hw);
|
|
|
-static void ath5k_detach(struct pci_dev *pdev,
|
|
|
- struct ieee80211_hw *hw);
|
|
|
-/* Channel/mode setup */
|
|
|
-static inline short ath5k_ieee2mhz(short chan);
|
|
|
-static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
|
|
|
- struct ieee80211_channel *channels,
|
|
|
- unsigned int mode,
|
|
|
- unsigned int max);
|
|
|
-static int ath5k_setup_bands(struct ieee80211_hw *hw);
|
|
|
-static int ath5k_chan_set(struct ath5k_softc *sc,
|
|
|
- struct ieee80211_channel *chan);
|
|
|
-static void ath5k_setcurmode(struct ath5k_softc *sc,
|
|
|
- unsigned int mode);
|
|
|
-static void ath5k_mode_setup(struct ath5k_softc *sc);
|
|
|
-
|
|
|
-/* Descriptor setup */
|
|
|
-static int ath5k_desc_alloc(struct ath5k_softc *sc,
|
|
|
- struct pci_dev *pdev);
|
|
|
-static void ath5k_desc_free(struct ath5k_softc *sc,
|
|
|
- struct pci_dev *pdev);
|
|
|
-/* Buffers setup */
|
|
|
-static int ath5k_rxbuf_setup(struct ath5k_softc *sc,
|
|
|
- struct ath5k_buf *bf);
|
|
|
-static int ath5k_txbuf_setup(struct ath5k_softc *sc,
|
|
|
- struct ath5k_buf *bf,
|
|
|
- struct ath5k_txq *txq, int padsize);
|
|
|
-
|
|
|
static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc,
|
|
|
struct ath5k_buf *bf)
|
|
|
{
|
|
@@ -345,35 +221,6 @@ static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc,
|
|
|
}
|
|
|
|
|
|
|
|
|
-/* Queues setup */
|
|
|
-static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
|
|
|
- int qtype, int subtype);
|
|
|
-static int ath5k_beaconq_setup(struct ath5k_hw *ah);
|
|
|
-static int ath5k_beaconq_config(struct ath5k_softc *sc);
|
|
|
-static void ath5k_txq_drainq(struct ath5k_softc *sc,
|
|
|
- struct ath5k_txq *txq);
|
|
|
-static void ath5k_txq_cleanup(struct ath5k_softc *sc);
|
|
|
-static void ath5k_txq_release(struct ath5k_softc *sc);
|
|
|
-/* Rx handling */
|
|
|
-static int ath5k_rx_start(struct ath5k_softc *sc);
|
|
|
-static void ath5k_rx_stop(struct ath5k_softc *sc);
|
|
|
-static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
|
|
|
- struct sk_buff *skb,
|
|
|
- struct ath5k_rx_status *rs);
|
|
|
-static void ath5k_tasklet_rx(unsigned long data);
|
|
|
-/* Tx handling */
|
|
|
-static void ath5k_tx_processq(struct ath5k_softc *sc,
|
|
|
- struct ath5k_txq *txq);
|
|
|
-static void ath5k_tasklet_tx(unsigned long data);
|
|
|
-/* Beacon handling */
|
|
|
-static int ath5k_beacon_setup(struct ath5k_softc *sc,
|
|
|
- struct ath5k_buf *bf);
|
|
|
-static void ath5k_beacon_send(struct ath5k_softc *sc);
|
|
|
-static void ath5k_beacon_config(struct ath5k_softc *sc);
|
|
|
-static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
|
|
|
-static void ath5k_tasklet_beacon(unsigned long data);
|
|
|
-static void ath5k_tasklet_ani(unsigned long data);
|
|
|
-
|
|
|
static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
|
|
|
{
|
|
|
u64 tsf = ath5k_hw_get_tsf64(ah);
|
|
@@ -384,50 +231,6 @@ static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
|
|
|
return (tsf & ~0x7fff) | rstamp;
|
|
|
}
|
|
|
|
|
|
-/* Interrupt handling */
|
|
|
-static int ath5k_init(struct ath5k_softc *sc);
|
|
|
-static int ath5k_stop_locked(struct ath5k_softc *sc);
|
|
|
-static int ath5k_stop_hw(struct ath5k_softc *sc);
|
|
|
-static irqreturn_t ath5k_intr(int irq, void *dev_id);
|
|
|
-static void ath5k_reset_work(struct work_struct *work);
|
|
|
-
|
|
|
-static void ath5k_tasklet_calibrate(unsigned long data);
|
|
|
-
|
|
|
-/*
|
|
|
- * Module init/exit functions
|
|
|
- */
|
|
|
-static int __init
|
|
|
-init_ath5k_pci(void)
|
|
|
-{
|
|
|
- int ret;
|
|
|
-
|
|
|
- ath5k_debug_init();
|
|
|
-
|
|
|
- ret = pci_register_driver(&ath5k_pci_driver);
|
|
|
- if (ret) {
|
|
|
- printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
|
|
|
- return ret;
|
|
|
- }
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static void __exit
|
|
|
-exit_ath5k_pci(void)
|
|
|
-{
|
|
|
- pci_unregister_driver(&ath5k_pci_driver);
|
|
|
-
|
|
|
- ath5k_debug_finish();
|
|
|
-}
|
|
|
-
|
|
|
-module_init(init_ath5k_pci);
|
|
|
-module_exit(exit_ath5k_pci);
|
|
|
-
|
|
|
-
|
|
|
-/********************\
|
|
|
-* PCI Initialization *
|
|
|
-\********************/
|
|
|
-
|
|
|
static const char *
|
|
|
ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
|
|
|
{
|
|
@@ -466,3082 +269,3276 @@ static const struct ath_ops ath5k_common_ops = {
|
|
|
.write = ath5k_iowrite32,
|
|
|
};
|
|
|
|
|
|
-static int __devinit
|
|
|
-ath5k_pci_probe(struct pci_dev *pdev,
|
|
|
- const struct pci_device_id *id)
|
|
|
-{
|
|
|
- void __iomem *mem;
|
|
|
- struct ath5k_softc *sc;
|
|
|
- struct ath_common *common;
|
|
|
- struct ieee80211_hw *hw;
|
|
|
- int ret;
|
|
|
- u8 csz;
|
|
|
+/***********************\
|
|
|
+* Driver Initialization *
|
|
|
+\***********************/
|
|
|
|
|
|
- /*
|
|
|
- * L0s needs to be disabled on all ath5k cards.
|
|
|
- *
|
|
|
- * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
|
|
|
- * by default in the future in 2.6.36) this will also mean both L1 and
|
|
|
- * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
|
|
|
- * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
|
|
|
- * though but cannot currently undue the effect of a blacklist, for
|
|
|
- * details you can read pcie_aspm_sanity_check() and see how it adjusts
|
|
|
- * the device link capability.
|
|
|
- *
|
|
|
- * It may be possible in the future to implement some PCI API to allow
|
|
|
- * drivers to override blacklists for pre 1.1 PCIe but for now it is
|
|
|
- * best to accept that both L0s and L1 will be disabled completely for
|
|
|
- * distributions shipping with CONFIG_PCIEASPM rather than having this
|
|
|
- * issue present. Motivation for adding this new API will be to help
|
|
|
- * with power consumption for some of these devices.
|
|
|
- */
|
|
|
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
|
|
|
+static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
|
|
|
+{
|
|
|
+ struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(sc->ah);
|
|
|
|
|
|
- ret = pci_enable_device(pdev);
|
|
|
- if (ret) {
|
|
|
- dev_err(&pdev->dev, "can't enable device\n");
|
|
|
- goto err;
|
|
|
- }
|
|
|
+ return ath_reg_notifier_apply(wiphy, request, regulatory);
|
|
|
+}
|
|
|
|
|
|
- /* XXX 32-bit addressing only */
|
|
|
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
|
- if (ret) {
|
|
|
- dev_err(&pdev->dev, "32-bit DMA not available\n");
|
|
|
- goto err_dis;
|
|
|
- }
|
|
|
+/********************\
|
|
|
+* Channel/mode setup *
|
|
|
+\********************/
|
|
|
|
|
|
- /*
|
|
|
- * Cache line size is used to size and align various
|
|
|
- * structures used to communicate with the hardware.
|
|
|
- */
|
|
|
- pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
|
|
|
- if (csz == 0) {
|
|
|
- /*
|
|
|
- * Linux 2.4.18 (at least) writes the cache line size
|
|
|
- * register as a 16-bit wide register which is wrong.
|
|
|
- * We must have this setup properly for rx buffer
|
|
|
- * DMA to work so force a reasonable value here if it
|
|
|
- * comes up zero.
|
|
|
- */
|
|
|
- csz = L1_CACHE_BYTES >> 2;
|
|
|
- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
|
|
|
- }
|
|
|
- /*
|
|
|
- * The default setting of latency timer yields poor results,
|
|
|
- * set it to the value used by other systems. It may be worth
|
|
|
- * tweaking this setting more.
|
|
|
- */
|
|
|
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
|
|
|
+/*
|
|
|
+ * Convert IEEE channel number to MHz frequency.
|
|
|
+ */
|
|
|
+static inline short
|
|
|
+ath5k_ieee2mhz(short chan)
|
|
|
+{
|
|
|
+ if (chan <= 14 || chan >= 27)
|
|
|
+ return ieee80211chan2mhz(chan);
|
|
|
+ else
|
|
|
+ return 2212 + chan * 20;
|
|
|
+}
|
|
|
|
|
|
- /* Enable bus mastering */
|
|
|
- pci_set_master(pdev);
|
|
|
+/*
|
|
|
+ * Returns true for the channel numbers used without all_channels modparam.
|
|
|
+ */
|
|
|
+static bool ath5k_is_standard_channel(short chan)
|
|
|
+{
|
|
|
+ return ((chan <= 14) ||
|
|
|
+ /* UNII 1,2 */
|
|
|
+ ((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
|
|
|
+ /* midband */
|
|
|
+ ((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
|
|
|
+ /* UNII-3 */
|
|
|
+ ((chan & 3) == 1 && chan >= 149 && chan <= 165));
|
|
|
+}
|
|
|
|
|
|
- /*
|
|
|
- * Disable the RETRY_TIMEOUT register (0x41) to keep
|
|
|
- * PCI Tx retries from interfering with C3 CPU state.
|
|
|
- */
|
|
|
- pci_write_config_byte(pdev, 0x41, 0);
|
|
|
+static unsigned int
|
|
|
+ath5k_copy_channels(struct ath5k_hw *ah,
|
|
|
+ struct ieee80211_channel *channels,
|
|
|
+ unsigned int mode,
|
|
|
+ unsigned int max)
|
|
|
+{
|
|
|
+ unsigned int i, count, size, chfreq, freq, ch;
|
|
|
|
|
|
- ret = pci_request_region(pdev, 0, "ath5k");
|
|
|
- if (ret) {
|
|
|
- dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
|
|
|
- goto err_dis;
|
|
|
- }
|
|
|
+ if (!test_bit(mode, ah->ah_modes))
|
|
|
+ return 0;
|
|
|
|
|
|
- mem = pci_iomap(pdev, 0, 0);
|
|
|
- if (!mem) {
|
|
|
- dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
|
|
|
- ret = -EIO;
|
|
|
- goto err_reg;
|
|
|
+ switch (mode) {
|
|
|
+ case AR5K_MODE_11A:
|
|
|
+ case AR5K_MODE_11A_TURBO:
|
|
|
+ /* 1..220, but 2GHz frequencies are filtered by check_channel */
|
|
|
+ size = 220 ;
|
|
|
+ chfreq = CHANNEL_5GHZ;
|
|
|
+ break;
|
|
|
+ case AR5K_MODE_11B:
|
|
|
+ case AR5K_MODE_11G:
|
|
|
+ case AR5K_MODE_11G_TURBO:
|
|
|
+ size = 26;
|
|
|
+ chfreq = CHANNEL_2GHZ;
|
|
|
+ break;
|
|
|
+ default:
|
|
|
+ ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
- /*
|
|
|
- * Allocate hw (mac80211 main struct)
|
|
|
- * and hw->priv (driver private data)
|
|
|
- */
|
|
|
- hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
|
|
|
- if (hw == NULL) {
|
|
|
- dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
|
|
|
- ret = -ENOMEM;
|
|
|
- goto err_map;
|
|
|
- }
|
|
|
+ for (i = 0, count = 0; i < size && max > 0; i++) {
|
|
|
+ ch = i + 1 ;
|
|
|
+ freq = ath5k_ieee2mhz(ch);
|
|
|
|
|
|
- dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
|
|
|
-
|
|
|
- /* Initialize driver private data */
|
|
|
- SET_IEEE80211_DEV(hw, &pdev->dev);
|
|
|
- hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
|
|
|
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
|
|
|
- IEEE80211_HW_SIGNAL_DBM;
|
|
|
+ /* Check if channel is supported by the chipset */
|
|
|
+ if (!ath5k_channel_ok(ah, freq, chfreq))
|
|
|
+ continue;
|
|
|
|
|
|
- hw->wiphy->interface_modes =
|
|
|
- BIT(NL80211_IFTYPE_AP) |
|
|
|
- BIT(NL80211_IFTYPE_STATION) |
|
|
|
- BIT(NL80211_IFTYPE_ADHOC) |
|
|
|
- BIT(NL80211_IFTYPE_MESH_POINT);
|
|
|
+ if (!modparam_all_channels && !ath5k_is_standard_channel(ch))
|
|
|
+ continue;
|
|
|
|
|
|
- hw->extra_tx_headroom = 2;
|
|
|
- hw->channel_change_time = 5000;
|
|
|
- sc = hw->priv;
|
|
|
- sc->hw = hw;
|
|
|
- sc->pdev = pdev;
|
|
|
+ /* Write channel info and increment counter */
|
|
|
+ channels[count].center_freq = freq;
|
|
|
+ channels[count].band = (chfreq == CHANNEL_2GHZ) ?
|
|
|
+ IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
|
|
|
+ switch (mode) {
|
|
|
+ case AR5K_MODE_11A:
|
|
|
+ case AR5K_MODE_11G:
|
|
|
+ channels[count].hw_value = chfreq | CHANNEL_OFDM;
|
|
|
+ break;
|
|
|
+ case AR5K_MODE_11A_TURBO:
|
|
|
+ case AR5K_MODE_11G_TURBO:
|
|
|
+ channels[count].hw_value = chfreq |
|
|
|
+ CHANNEL_OFDM | CHANNEL_TURBO;
|
|
|
+ break;
|
|
|
+ case AR5K_MODE_11B:
|
|
|
+ channels[count].hw_value = CHANNEL_B;
|
|
|
+ }
|
|
|
|
|
|
- ath5k_debug_init_device(sc);
|
|
|
+ count++;
|
|
|
+ max--;
|
|
|
+ }
|
|
|
|
|
|
- /*
|
|
|
- * Mark the device as detached to avoid processing
|
|
|
- * interrupts until setup is complete.
|
|
|
- */
|
|
|
- __set_bit(ATH_STAT_INVALID, sc->status);
|
|
|
+ return count;
|
|
|
+}
|
|
|
|
|
|
- sc->iobase = mem; /* So we can unmap it on detach */
|
|
|
- sc->opmode = NL80211_IFTYPE_STATION;
|
|
|
- sc->bintval = 1000;
|
|
|
- mutex_init(&sc->lock);
|
|
|
- spin_lock_init(&sc->rxbuflock);
|
|
|
- spin_lock_init(&sc->txbuflock);
|
|
|
- spin_lock_init(&sc->block);
|
|
|
+static void
|
|
|
+ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
|
|
|
+{
|
|
|
+ u8 i;
|
|
|
|
|
|
- /* Set private data */
|
|
|
- pci_set_drvdata(pdev, sc);
|
|
|
+ for (i = 0; i < AR5K_MAX_RATES; i++)
|
|
|
+ sc->rate_idx[b->band][i] = -1;
|
|
|
|
|
|
- /* Setup interrupt handler */
|
|
|
- ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "request_irq failed\n");
|
|
|
- goto err_free;
|
|
|
+ for (i = 0; i < b->n_bitrates; i++) {
|
|
|
+ sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
|
|
|
+ if (b->bitrates[i].hw_value_short)
|
|
|
+ sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
|
|
|
}
|
|
|
+}
|
|
|
|
|
|
- /* If we passed the test, malloc an ath5k_hw struct */
|
|
|
- sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
|
|
|
- if (!sc->ah) {
|
|
|
- ret = -ENOMEM;
|
|
|
- ATH5K_ERR(sc, "out of memory\n");
|
|
|
- goto err_irq;
|
|
|
- }
|
|
|
+static int
|
|
|
+ath5k_setup_bands(struct ieee80211_hw *hw)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct ieee80211_supported_band *sband;
|
|
|
+ int max_c, count_c = 0;
|
|
|
+ int i;
|
|
|
|
|
|
- sc->ah->ah_sc = sc;
|
|
|
- sc->ah->ah_iobase = sc->iobase;
|
|
|
- common = ath5k_hw_common(sc->ah);
|
|
|
- common->ops = &ath5k_common_ops;
|
|
|
- common->ah = sc->ah;
|
|
|
- common->hw = hw;
|
|
|
- common->cachelsz = csz << 2; /* convert to bytes */
|
|
|
+ BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
|
|
|
+ max_c = ARRAY_SIZE(sc->channels);
|
|
|
|
|
|
- /* Initialize device */
|
|
|
- ret = ath5k_hw_attach(sc);
|
|
|
- if (ret) {
|
|
|
- goto err_free_ah;
|
|
|
- }
|
|
|
+ /* 2GHz band */
|
|
|
+ sband = &sc->sbands[IEEE80211_BAND_2GHZ];
|
|
|
+ sband->band = IEEE80211_BAND_2GHZ;
|
|
|
+ sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
|
|
|
|
|
|
- /* set up multi-rate retry capabilities */
|
|
|
- if (sc->ah->ah_version == AR5K_AR5212) {
|
|
|
- hw->max_rates = 4;
|
|
|
- hw->max_rate_tries = 11;
|
|
|
- }
|
|
|
+ if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
|
|
|
+ /* G mode */
|
|
|
+ memcpy(sband->bitrates, &ath5k_rates[0],
|
|
|
+ sizeof(struct ieee80211_rate) * 12);
|
|
|
+ sband->n_bitrates = 12;
|
|
|
|
|
|
- /* Finish private driver data initialization */
|
|
|
- ret = ath5k_attach(pdev, hw);
|
|
|
- if (ret)
|
|
|
- goto err_ah;
|
|
|
+ sband->channels = sc->channels;
|
|
|
+ sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
|
+ AR5K_MODE_11G, max_c);
|
|
|
|
|
|
- ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
|
|
|
- ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
|
|
|
- sc->ah->ah_mac_srev,
|
|
|
- sc->ah->ah_phy_revision);
|
|
|
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
|
|
|
+ count_c = sband->n_channels;
|
|
|
+ max_c -= count_c;
|
|
|
+ } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
|
|
|
+ /* B mode */
|
|
|
+ memcpy(sband->bitrates, &ath5k_rates[0],
|
|
|
+ sizeof(struct ieee80211_rate) * 4);
|
|
|
+ sband->n_bitrates = 4;
|
|
|
|
|
|
- if (!sc->ah->ah_single_chip) {
|
|
|
- /* Single chip radio (!RF5111) */
|
|
|
- if (sc->ah->ah_radio_5ghz_revision &&
|
|
|
- !sc->ah->ah_radio_2ghz_revision) {
|
|
|
- /* No 5GHz support -> report 2GHz radio */
|
|
|
- if (!test_bit(AR5K_MODE_11A,
|
|
|
- sc->ah->ah_capabilities.cap_mode)) {
|
|
|
- ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
|
|
|
- ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
- sc->ah->ah_radio_5ghz_revision),
|
|
|
- sc->ah->ah_radio_5ghz_revision);
|
|
|
- /* No 2GHz support (5110 and some
|
|
|
- * 5Ghz only cards) -> report 5Ghz radio */
|
|
|
- } else if (!test_bit(AR5K_MODE_11B,
|
|
|
- sc->ah->ah_capabilities.cap_mode)) {
|
|
|
- ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
|
|
|
- ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
- sc->ah->ah_radio_5ghz_revision),
|
|
|
- sc->ah->ah_radio_5ghz_revision);
|
|
|
- /* Multiband radio */
|
|
|
- } else {
|
|
|
- ATH5K_INFO(sc, "RF%s multiband radio found"
|
|
|
- " (0x%x)\n",
|
|
|
- ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
- sc->ah->ah_radio_5ghz_revision),
|
|
|
- sc->ah->ah_radio_5ghz_revision);
|
|
|
+ /* 5211 only supports B rates and uses 4bit rate codes
|
|
|
+ * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
|
|
|
+ * fix them up here:
|
|
|
+ */
|
|
|
+ if (ah->ah_version == AR5K_AR5211) {
|
|
|
+ for (i = 0; i < 4; i++) {
|
|
|
+ sband->bitrates[i].hw_value =
|
|
|
+ sband->bitrates[i].hw_value & 0xF;
|
|
|
+ sband->bitrates[i].hw_value_short =
|
|
|
+ sband->bitrates[i].hw_value_short & 0xF;
|
|
|
}
|
|
|
}
|
|
|
- /* Multi chip radio (RF5111 - RF2111) ->
|
|
|
- * report both 2GHz/5GHz radios */
|
|
|
- else if (sc->ah->ah_radio_5ghz_revision &&
|
|
|
- sc->ah->ah_radio_2ghz_revision){
|
|
|
- ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
|
|
|
- ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
- sc->ah->ah_radio_5ghz_revision),
|
|
|
- sc->ah->ah_radio_5ghz_revision);
|
|
|
- ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
|
|
|
- ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
- sc->ah->ah_radio_2ghz_revision),
|
|
|
- sc->ah->ah_radio_2ghz_revision);
|
|
|
- }
|
|
|
- }
|
|
|
|
|
|
+ sband->channels = sc->channels;
|
|
|
+ sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
|
+ AR5K_MODE_11B, max_c);
|
|
|
|
|
|
- /* ready to process interrupts */
|
|
|
- __clear_bit(ATH_STAT_INVALID, sc->status);
|
|
|
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
|
|
|
+ count_c = sband->n_channels;
|
|
|
+ max_c -= count_c;
|
|
|
+ }
|
|
|
+ ath5k_setup_rate_idx(sc, sband);
|
|
|
|
|
|
- return 0;
|
|
|
-err_ah:
|
|
|
- ath5k_hw_detach(sc->ah);
|
|
|
-err_free_ah:
|
|
|
- kfree(sc->ah);
|
|
|
-err_irq:
|
|
|
- free_irq(pdev->irq, sc);
|
|
|
-err_free:
|
|
|
- ieee80211_free_hw(hw);
|
|
|
-err_map:
|
|
|
- pci_iounmap(pdev, mem);
|
|
|
-err_reg:
|
|
|
- pci_release_region(pdev, 0);
|
|
|
-err_dis:
|
|
|
- pci_disable_device(pdev);
|
|
|
-err:
|
|
|
- return ret;
|
|
|
-}
|
|
|
+ /* 5GHz band, A mode */
|
|
|
+ if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
|
|
|
+ sband = &sc->sbands[IEEE80211_BAND_5GHZ];
|
|
|
+ sband->band = IEEE80211_BAND_5GHZ;
|
|
|
+ sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
|
|
|
|
|
|
-static void __devexit
|
|
|
-ath5k_pci_remove(struct pci_dev *pdev)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = pci_get_drvdata(pdev);
|
|
|
+ memcpy(sband->bitrates, &ath5k_rates[4],
|
|
|
+ sizeof(struct ieee80211_rate) * 8);
|
|
|
+ sband->n_bitrates = 8;
|
|
|
|
|
|
- ath5k_debug_finish_device(sc);
|
|
|
- ath5k_detach(pdev, sc->hw);
|
|
|
- ath5k_hw_detach(sc->ah);
|
|
|
- kfree(sc->ah);
|
|
|
- free_irq(pdev->irq, sc);
|
|
|
- pci_iounmap(pdev, sc->iobase);
|
|
|
- pci_release_region(pdev, 0);
|
|
|
- pci_disable_device(pdev);
|
|
|
- ieee80211_free_hw(sc->hw);
|
|
|
-}
|
|
|
+ sband->channels = &sc->channels[count_c];
|
|
|
+ sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
|
+ AR5K_MODE_11A, max_c);
|
|
|
|
|
|
-#ifdef CONFIG_PM_SLEEP
|
|
|
-static int ath5k_pci_suspend(struct device *dev)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
|
|
|
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
|
|
|
+ }
|
|
|
+ ath5k_setup_rate_idx(sc, sband);
|
|
|
+
|
|
|
+ ath5k_debug_dump_bands(sc);
|
|
|
|
|
|
- ath5k_led_off(sc);
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int ath5k_pci_resume(struct device *dev)
|
|
|
-{
|
|
|
- struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
- struct ath5k_softc *sc = pci_get_drvdata(pdev);
|
|
|
-
|
|
|
- /*
|
|
|
- * Suspend/Resume resets the PCI configuration space, so we have to
|
|
|
- * re-disable the RETRY_TIMEOUT register (0x41) to keep
|
|
|
- * PCI Tx retries from interfering with C3 CPU state
|
|
|
- */
|
|
|
- pci_write_config_byte(pdev, 0x41, 0);
|
|
|
+/*
|
|
|
+ * Set/change channels. We always reset the chip.
|
|
|
+ * To accomplish this we must first cleanup any pending DMA,
|
|
|
+ * then restart stuff after a la ath5k_init.
|
|
|
+ *
|
|
|
+ * Called with sc->lock.
|
|
|
+ */
|
|
|
+static int
|
|
|
+ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
|
|
|
+{
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
+ "channel set, resetting (%u -> %u MHz)\n",
|
|
|
+ sc->curchan->center_freq, chan->center_freq);
|
|
|
|
|
|
- ath5k_led_enable(sc);
|
|
|
- return 0;
|
|
|
+ /*
|
|
|
+ * To switch channels clear any pending DMA operations;
|
|
|
+ * wait long enough for the RX fifo to drain, reset the
|
|
|
+ * hardware at the new frequency, and then re-enable
|
|
|
+ * the relevant bits of the h/w.
|
|
|
+ */
|
|
|
+ return ath5k_reset(sc, chan);
|
|
|
}
|
|
|
-#endif /* CONFIG_PM_SLEEP */
|
|
|
|
|
|
+static void
|
|
|
+ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
|
|
|
+{
|
|
|
+ sc->curmode = mode;
|
|
|
|
|
|
-/***********************\
|
|
|
-* Driver Initialization *
|
|
|
-\***********************/
|
|
|
+ if (mode == AR5K_MODE_11A) {
|
|
|
+ sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ];
|
|
|
+ } else {
|
|
|
+ sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ];
|
|
|
+ }
|
|
|
+}
|
|
|
|
|
|
-static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
|
|
|
+static void
|
|
|
+ath5k_mode_setup(struct ath5k_softc *sc)
|
|
|
{
|
|
|
- struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ath_regulatory *regulatory = ath5k_hw_regulatory(sc->ah);
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ u32 rfilt;
|
|
|
|
|
|
- return ath_reg_notifier_apply(wiphy, request, regulatory);
|
|
|
+ /* configure rx filter */
|
|
|
+ rfilt = sc->filter_flags;
|
|
|
+ ath5k_hw_set_rx_filter(ah, rfilt);
|
|
|
+
|
|
|
+ if (ath5k_hw_hasbssidmask(ah))
|
|
|
+ ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
|
|
|
+
|
|
|
+ /* configure operational mode */
|
|
|
+ ath5k_hw_set_opmode(ah, sc->opmode);
|
|
|
+
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d\n", sc->opmode);
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
|
|
|
}
|
|
|
|
|
|
-static int
|
|
|
-ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
|
|
|
+static inline int
|
|
|
+ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
|
|
|
- u8 mac[ETH_ALEN] = {};
|
|
|
- int ret;
|
|
|
+ int rix;
|
|
|
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
|
|
|
+ /* return base rate on errors */
|
|
|
+ if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
|
|
|
+ "hw_rix out of bounds: %x\n", hw_rix))
|
|
|
+ return 0;
|
|
|
|
|
|
- /*
|
|
|
- * Check if the MAC has multi-rate retry support.
|
|
|
- * We do this by trying to setup a fake extended
|
|
|
- * descriptor. MACs that don't have support will
|
|
|
- * return false w/o doing anything. MACs that do
|
|
|
- * support it will return true w/o doing anything.
|
|
|
- */
|
|
|
- ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
|
|
|
+ rix = sc->rate_idx[sc->curband->band][hw_rix];
|
|
|
+ if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
|
|
|
+ rix = 0;
|
|
|
|
|
|
- if (ret < 0)
|
|
|
- goto err;
|
|
|
- if (ret > 0)
|
|
|
- __set_bit(ATH_STAT_MRRETRY, sc->status);
|
|
|
+ return rix;
|
|
|
+}
|
|
|
|
|
|
- /*
|
|
|
- * Collect the channel list. The 802.11 layer
|
|
|
- * is resposible for filtering this list based
|
|
|
- * on settings like the phy mode and regulatory
|
|
|
- * domain restrictions.
|
|
|
- */
|
|
|
- ret = ath5k_setup_bands(hw);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "can't get channels\n");
|
|
|
- goto err;
|
|
|
- }
|
|
|
+/***************\
|
|
|
+* Buffers setup *
|
|
|
+\***************/
|
|
|
|
|
|
- /* NB: setup here so ath5k_rate_update is happy */
|
|
|
- if (test_bit(AR5K_MODE_11A, ah->ah_modes))
|
|
|
- ath5k_setcurmode(sc, AR5K_MODE_11A);
|
|
|
- else
|
|
|
- ath5k_setcurmode(sc, AR5K_MODE_11B);
|
|
|
+static
|
|
|
+struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
|
|
|
+{
|
|
|
+ struct ath_common *common = ath5k_hw_common(sc->ah);
|
|
|
+ struct sk_buff *skb;
|
|
|
|
|
|
/*
|
|
|
- * Allocate tx+rx descriptors and populate the lists.
|
|
|
+ * Allocate buffer with headroom_needed space for the
|
|
|
+ * fake physical layer header at the start.
|
|
|
*/
|
|
|
- ret = ath5k_desc_alloc(sc, pdev);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "can't allocate descriptors\n");
|
|
|
- goto err;
|
|
|
- }
|
|
|
+ skb = ath_rxbuf_alloc(common,
|
|
|
+ common->rx_bufsize,
|
|
|
+ GFP_ATOMIC);
|
|
|
|
|
|
- /*
|
|
|
- * Allocate hardware transmit queues: one queue for
|
|
|
- * beacon frames and one data queue for each QoS
|
|
|
- * priority. Note that hw functions handle resetting
|
|
|
- * these queues at the needed time.
|
|
|
- */
|
|
|
- ret = ath5k_beaconq_setup(ah);
|
|
|
- if (ret < 0) {
|
|
|
- ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
|
|
|
- goto err_desc;
|
|
|
- }
|
|
|
- sc->bhalq = ret;
|
|
|
- sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0);
|
|
|
- if (IS_ERR(sc->cabq)) {
|
|
|
- ATH5K_ERR(sc, "can't setup cab queue\n");
|
|
|
- ret = PTR_ERR(sc->cabq);
|
|
|
- goto err_bhal;
|
|
|
+ if (!skb) {
|
|
|
+ ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
|
|
|
+ common->rx_bufsize);
|
|
|
+ return NULL;
|
|
|
}
|
|
|
|
|
|
- sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
|
|
|
- if (IS_ERR(sc->txq)) {
|
|
|
- ATH5K_ERR(sc, "can't setup xmit queue\n");
|
|
|
- ret = PTR_ERR(sc->txq);
|
|
|
- goto err_queues;
|
|
|
+ *skb_addr = pci_map_single(sc->pdev,
|
|
|
+ skb->data, common->rx_bufsize,
|
|
|
+ PCI_DMA_FROMDEVICE);
|
|
|
+ if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
|
|
|
+ ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
|
|
|
+ dev_kfree_skb(skb);
|
|
|
+ return NULL;
|
|
|
}
|
|
|
+ return skb;
|
|
|
+}
|
|
|
|
|
|
- tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
|
|
|
- tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
|
|
|
- tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc);
|
|
|
- tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
|
|
|
- tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc);
|
|
|
-
|
|
|
- INIT_WORK(&sc->reset_work, ath5k_reset_work);
|
|
|
+static int
|
|
|
+ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
|
|
|
+{
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct sk_buff *skb = bf->skb;
|
|
|
+ struct ath5k_desc *ds;
|
|
|
+ int ret;
|
|
|
|
|
|
- ret = ath5k_eeprom_read_mac(ah, mac);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
|
|
|
- sc->pdev->device);
|
|
|
- goto err_queues;
|
|
|
+ if (!skb) {
|
|
|
+ skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr);
|
|
|
+ if (!skb)
|
|
|
+ return -ENOMEM;
|
|
|
+ bf->skb = skb;
|
|
|
}
|
|
|
|
|
|
- SET_IEEE80211_PERM_ADDR(hw, mac);
|
|
|
- /* All MAC address bits matter for ACKs */
|
|
|
- memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
|
|
|
- ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
|
|
|
-
|
|
|
- regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
|
|
|
- ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
|
|
|
+ /*
|
|
|
+ * Setup descriptors. For receive we always terminate
|
|
|
+ * the descriptor list with a self-linked entry so we'll
|
|
|
+ * not get overrun under high load (as can happen with a
|
|
|
+ * 5212 when ANI processing enables PHY error frames).
|
|
|
+ *
|
|
|
+ * To ensure the last descriptor is self-linked we create
|
|
|
+ * each descriptor as self-linked and add it to the end. As
|
|
|
+ * each additional descriptor is added the previous self-linked
|
|
|
+ * entry is "fixed" naturally. This should be safe even
|
|
|
+ * if DMA is happening. When processing RX interrupts we
|
|
|
+ * never remove/process the last, self-linked, entry on the
|
|
|
+ * descriptor list. This ensures the hardware always has
|
|
|
+ * someplace to write a new frame.
|
|
|
+ */
|
|
|
+ ds = bf->desc;
|
|
|
+ ds->ds_link = bf->daddr; /* link to self */
|
|
|
+ ds->ds_data = bf->skbaddr;
|
|
|
+ ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0);
|
|
|
if (ret) {
|
|
|
- ATH5K_ERR(sc, "can't initialize regulatory system\n");
|
|
|
- goto err_queues;
|
|
|
+ ATH5K_ERR(sc, "%s: could not setup RX desc\n", __func__);
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
- ret = ieee80211_register_hw(hw);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "can't register ieee80211 hw\n");
|
|
|
- goto err_queues;
|
|
|
- }
|
|
|
+ if (sc->rxlink != NULL)
|
|
|
+ *sc->rxlink = bf->daddr;
|
|
|
+ sc->rxlink = &ds->ds_link;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- if (!ath_is_world_regd(regulatory))
|
|
|
- regulatory_hint(hw->wiphy, regulatory->alpha2);
|
|
|
+static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
|
|
|
+{
|
|
|
+ struct ieee80211_hdr *hdr;
|
|
|
+ enum ath5k_pkt_type htype;
|
|
|
+ __le16 fc;
|
|
|
|
|
|
- ath5k_init_leds(sc);
|
|
|
+ hdr = (struct ieee80211_hdr *)skb->data;
|
|
|
+ fc = hdr->frame_control;
|
|
|
|
|
|
- ath5k_sysfs_register(sc);
|
|
|
+ if (ieee80211_is_beacon(fc))
|
|
|
+ htype = AR5K_PKT_TYPE_BEACON;
|
|
|
+ else if (ieee80211_is_probe_resp(fc))
|
|
|
+ htype = AR5K_PKT_TYPE_PROBE_RESP;
|
|
|
+ else if (ieee80211_is_atim(fc))
|
|
|
+ htype = AR5K_PKT_TYPE_ATIM;
|
|
|
+ else if (ieee80211_is_pspoll(fc))
|
|
|
+ htype = AR5K_PKT_TYPE_PSPOLL;
|
|
|
+ else
|
|
|
+ htype = AR5K_PKT_TYPE_NORMAL;
|
|
|
|
|
|
- return 0;
|
|
|
-err_queues:
|
|
|
- ath5k_txq_release(sc);
|
|
|
-err_bhal:
|
|
|
- ath5k_hw_release_tx_queue(ah, sc->bhalq);
|
|
|
-err_desc:
|
|
|
- ath5k_desc_free(sc, pdev);
|
|
|
-err:
|
|
|
- return ret;
|
|
|
+ return htype;
|
|
|
}
|
|
|
|
|
|
-static void
|
|
|
-ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
|
|
|
+static int
|
|
|
+ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
|
|
|
+ struct ath5k_txq *txq, int padsize)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
-
|
|
|
- /*
|
|
|
- * NB: the order of these is important:
|
|
|
- * o call the 802.11 layer before detaching ath5k_hw to
|
|
|
- * ensure callbacks into the driver to delete global
|
|
|
- * key cache entries can be handled
|
|
|
- * o reclaim the tx queue data structures after calling
|
|
|
- * the 802.11 layer as we'll get called back to reclaim
|
|
|
- * node state and potentially want to use them
|
|
|
- * o to cleanup the tx queues the hal is called, so detach
|
|
|
- * it last
|
|
|
- * XXX: ??? detach ath5k_hw ???
|
|
|
- * Other than that, it's straightforward...
|
|
|
- */
|
|
|
- ieee80211_unregister_hw(hw);
|
|
|
- ath5k_desc_free(sc, pdev);
|
|
|
- ath5k_txq_release(sc);
|
|
|
- ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
|
|
|
- ath5k_unregister_leds(sc);
|
|
|
-
|
|
|
- ath5k_sysfs_unregister(sc);
|
|
|
- /*
|
|
|
- * NB: can't reclaim these until after ieee80211_ifdetach
|
|
|
- * returns because we'll get called back to reclaim node
|
|
|
- * state and potentially want to use them.
|
|
|
- */
|
|
|
-}
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct ath5k_desc *ds = bf->desc;
|
|
|
+ struct sk_buff *skb = bf->skb;
|
|
|
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
|
+ unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
|
|
|
+ struct ieee80211_rate *rate;
|
|
|
+ unsigned int mrr_rate[3], mrr_tries[3];
|
|
|
+ int i, ret;
|
|
|
+ u16 hw_rate;
|
|
|
+ u16 cts_rate = 0;
|
|
|
+ u16 duration = 0;
|
|
|
+ u8 rc_flags;
|
|
|
|
|
|
+ flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
|
|
|
|
|
|
+ /* XXX endianness */
|
|
|
+ bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
|
|
|
+ PCI_DMA_TODEVICE);
|
|
|
|
|
|
+ rate = ieee80211_get_tx_rate(sc->hw, info);
|
|
|
+ if (!rate) {
|
|
|
+ ret = -EINVAL;
|
|
|
+ goto err_unmap;
|
|
|
+ }
|
|
|
|
|
|
-/********************\
|
|
|
-* Channel/mode setup *
|
|
|
-\********************/
|
|
|
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
|
|
|
+ flags |= AR5K_TXDESC_NOACK;
|
|
|
|
|
|
-/*
|
|
|
- * Convert IEEE channel number to MHz frequency.
|
|
|
- */
|
|
|
-static inline short
|
|
|
-ath5k_ieee2mhz(short chan)
|
|
|
-{
|
|
|
- if (chan <= 14 || chan >= 27)
|
|
|
- return ieee80211chan2mhz(chan);
|
|
|
- else
|
|
|
- return 2212 + chan * 20;
|
|
|
-}
|
|
|
+ rc_flags = info->control.rates[0].flags;
|
|
|
+ hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
|
|
|
+ rate->hw_value_short : rate->hw_value;
|
|
|
|
|
|
-/*
|
|
|
- * Returns true for the channel numbers used without all_channels modparam.
|
|
|
- */
|
|
|
-static bool ath5k_is_standard_channel(short chan)
|
|
|
-{
|
|
|
- return ((chan <= 14) ||
|
|
|
- /* UNII 1,2 */
|
|
|
- ((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
|
|
|
- /* midband */
|
|
|
- ((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
|
|
|
- /* UNII-3 */
|
|
|
- ((chan & 3) == 1 && chan >= 149 && chan <= 165));
|
|
|
-}
|
|
|
+ pktlen = skb->len;
|
|
|
|
|
|
-static unsigned int
|
|
|
-ath5k_copy_channels(struct ath5k_hw *ah,
|
|
|
- struct ieee80211_channel *channels,
|
|
|
- unsigned int mode,
|
|
|
- unsigned int max)
|
|
|
-{
|
|
|
- unsigned int i, count, size, chfreq, freq, ch;
|
|
|
+ /* FIXME: If we are in g mode and rate is a CCK rate
|
|
|
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
|
|
|
+ * from tx power (value is in dB units already) */
|
|
|
+ if (info->control.hw_key) {
|
|
|
+ keyidx = info->control.hw_key->hw_key_idx;
|
|
|
+ pktlen += info->control.hw_key->icv_len;
|
|
|
+ }
|
|
|
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
|
|
|
+ flags |= AR5K_TXDESC_RTSENA;
|
|
|
+ cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
|
|
|
+ duration = le16_to_cpu(ieee80211_rts_duration(sc->hw,
|
|
|
+ sc->vif, pktlen, info));
|
|
|
+ }
|
|
|
+ if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
|
|
|
+ flags |= AR5K_TXDESC_CTSENA;
|
|
|
+ cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
|
|
|
+ duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw,
|
|
|
+ sc->vif, pktlen, info));
|
|
|
+ }
|
|
|
+ ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
|
|
|
+ ieee80211_get_hdrlen_from_skb(skb), padsize,
|
|
|
+ get_hw_packet_type(skb),
|
|
|
+ (sc->power_level * 2),
|
|
|
+ hw_rate,
|
|
|
+ info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
|
|
|
+ cts_rate, duration);
|
|
|
+ if (ret)
|
|
|
+ goto err_unmap;
|
|
|
|
|
|
- if (!test_bit(mode, ah->ah_modes))
|
|
|
- return 0;
|
|
|
+ memset(mrr_rate, 0, sizeof(mrr_rate));
|
|
|
+ memset(mrr_tries, 0, sizeof(mrr_tries));
|
|
|
+ for (i = 0; i < 3; i++) {
|
|
|
+ rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
|
|
|
+ if (!rate)
|
|
|
+ break;
|
|
|
|
|
|
- switch (mode) {
|
|
|
- case AR5K_MODE_11A:
|
|
|
- case AR5K_MODE_11A_TURBO:
|
|
|
- /* 1..220, but 2GHz frequencies are filtered by check_channel */
|
|
|
- size = 220 ;
|
|
|
- chfreq = CHANNEL_5GHZ;
|
|
|
- break;
|
|
|
- case AR5K_MODE_11B:
|
|
|
- case AR5K_MODE_11G:
|
|
|
- case AR5K_MODE_11G_TURBO:
|
|
|
- size = 26;
|
|
|
- chfreq = CHANNEL_2GHZ;
|
|
|
- break;
|
|
|
- default:
|
|
|
- ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
|
|
|
- return 0;
|
|
|
+ mrr_rate[i] = rate->hw_value;
|
|
|
+ mrr_tries[i] = info->control.rates[i + 1].count;
|
|
|
}
|
|
|
|
|
|
- for (i = 0, count = 0; i < size && max > 0; i++) {
|
|
|
- ch = i + 1 ;
|
|
|
- freq = ath5k_ieee2mhz(ch);
|
|
|
-
|
|
|
- /* Check if channel is supported by the chipset */
|
|
|
- if (!ath5k_channel_ok(ah, freq, chfreq))
|
|
|
- continue;
|
|
|
+ ath5k_hw_setup_mrr_tx_desc(ah, ds,
|
|
|
+ mrr_rate[0], mrr_tries[0],
|
|
|
+ mrr_rate[1], mrr_tries[1],
|
|
|
+ mrr_rate[2], mrr_tries[2]);
|
|
|
|
|
|
- if (!modparam_all_channels && !ath5k_is_standard_channel(ch))
|
|
|
- continue;
|
|
|
+ ds->ds_link = 0;
|
|
|
+ ds->ds_data = bf->skbaddr;
|
|
|
|
|
|
- /* Write channel info and increment counter */
|
|
|
- channels[count].center_freq = freq;
|
|
|
- channels[count].band = (chfreq == CHANNEL_2GHZ) ?
|
|
|
- IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
|
|
|
- switch (mode) {
|
|
|
- case AR5K_MODE_11A:
|
|
|
- case AR5K_MODE_11G:
|
|
|
- channels[count].hw_value = chfreq | CHANNEL_OFDM;
|
|
|
- break;
|
|
|
- case AR5K_MODE_11A_TURBO:
|
|
|
- case AR5K_MODE_11G_TURBO:
|
|
|
- channels[count].hw_value = chfreq |
|
|
|
- CHANNEL_OFDM | CHANNEL_TURBO;
|
|
|
- break;
|
|
|
- case AR5K_MODE_11B:
|
|
|
- channels[count].hw_value = CHANNEL_B;
|
|
|
- }
|
|
|
+ spin_lock_bh(&txq->lock);
|
|
|
+ list_add_tail(&bf->list, &txq->q);
|
|
|
+ txq->txq_len++;
|
|
|
+ if (txq->link == NULL) /* is this first packet? */
|
|
|
+ ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
|
|
|
+ else /* no, so only link it */
|
|
|
+ *txq->link = bf->daddr;
|
|
|
|
|
|
- count++;
|
|
|
- max--;
|
|
|
- }
|
|
|
+ txq->link = &ds->ds_link;
|
|
|
+ ath5k_hw_start_tx_dma(ah, txq->qnum);
|
|
|
+ mmiowb();
|
|
|
+ spin_unlock_bh(&txq->lock);
|
|
|
|
|
|
- return count;
|
|
|
+ return 0;
|
|
|
+err_unmap:
|
|
|
+ pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
-static void
|
|
|
-ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
|
|
|
+/*******************\
|
|
|
+* Descriptors setup *
|
|
|
+\*******************/
|
|
|
+
|
|
|
+static int
|
|
|
+ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
|
|
|
{
|
|
|
- u8 i;
|
|
|
+ struct ath5k_desc *ds;
|
|
|
+ struct ath5k_buf *bf;
|
|
|
+ dma_addr_t da;
|
|
|
+ unsigned int i;
|
|
|
+ int ret;
|
|
|
|
|
|
- for (i = 0; i < AR5K_MAX_RATES; i++)
|
|
|
- sc->rate_idx[b->band][i] = -1;
|
|
|
+ /* allocate descriptors */
|
|
|
+ sc->desc_len = sizeof(struct ath5k_desc) *
|
|
|
+ (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
|
|
|
+ sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
|
|
|
+ if (sc->desc == NULL) {
|
|
|
+ ATH5K_ERR(sc, "can't allocate descriptors\n");
|
|
|
+ ret = -ENOMEM;
|
|
|
+ goto err;
|
|
|
+ }
|
|
|
+ ds = sc->desc;
|
|
|
+ da = sc->desc_daddr;
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
|
|
|
+ ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
|
|
|
|
|
|
- for (i = 0; i < b->n_bitrates; i++) {
|
|
|
- sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
|
|
|
- if (b->bitrates[i].hw_value_short)
|
|
|
- sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
|
|
|
+ bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
|
|
|
+ sizeof(struct ath5k_buf), GFP_KERNEL);
|
|
|
+ if (bf == NULL) {
|
|
|
+ ATH5K_ERR(sc, "can't allocate bufptr\n");
|
|
|
+ ret = -ENOMEM;
|
|
|
+ goto err_free;
|
|
|
+ }
|
|
|
+ sc->bufptr = bf;
|
|
|
+
|
|
|
+ INIT_LIST_HEAD(&sc->rxbuf);
|
|
|
+ for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
|
|
|
+ bf->desc = ds;
|
|
|
+ bf->daddr = da;
|
|
|
+ list_add_tail(&bf->list, &sc->rxbuf);
|
|
|
+ }
|
|
|
+
|
|
|
+ INIT_LIST_HEAD(&sc->txbuf);
|
|
|
+ sc->txbuf_len = ATH_TXBUF;
|
|
|
+ for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
|
|
|
+ da += sizeof(*ds)) {
|
|
|
+ bf->desc = ds;
|
|
|
+ bf->daddr = da;
|
|
|
+ list_add_tail(&bf->list, &sc->txbuf);
|
|
|
}
|
|
|
+
|
|
|
+ /* beacon buffer */
|
|
|
+ bf->desc = ds;
|
|
|
+ bf->daddr = da;
|
|
|
+ sc->bbuf = bf;
|
|
|
+
|
|
|
+ return 0;
|
|
|
+err_free:
|
|
|
+ pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
|
|
|
+err:
|
|
|
+ sc->desc = NULL;
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
-static int
|
|
|
-ath5k_setup_bands(struct ieee80211_hw *hw)
|
|
|
+static void
|
|
|
+ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ieee80211_supported_band *sband;
|
|
|
- int max_c, count_c = 0;
|
|
|
- int i;
|
|
|
+ struct ath5k_buf *bf;
|
|
|
|
|
|
- BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
|
|
|
- max_c = ARRAY_SIZE(sc->channels);
|
|
|
+ ath5k_txbuf_free_skb(sc, sc->bbuf);
|
|
|
+ list_for_each_entry(bf, &sc->txbuf, list)
|
|
|
+ ath5k_txbuf_free_skb(sc, bf);
|
|
|
+ list_for_each_entry(bf, &sc->rxbuf, list)
|
|
|
+ ath5k_rxbuf_free_skb(sc, bf);
|
|
|
|
|
|
- /* 2GHz band */
|
|
|
- sband = &sc->sbands[IEEE80211_BAND_2GHZ];
|
|
|
- sband->band = IEEE80211_BAND_2GHZ;
|
|
|
- sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
|
|
|
+ /* Free memory associated with all descriptors */
|
|
|
+ pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
|
|
|
+ sc->desc = NULL;
|
|
|
+ sc->desc_daddr = 0;
|
|
|
|
|
|
- if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
|
|
|
- /* G mode */
|
|
|
- memcpy(sband->bitrates, &ath5k_rates[0],
|
|
|
- sizeof(struct ieee80211_rate) * 12);
|
|
|
- sband->n_bitrates = 12;
|
|
|
+ kfree(sc->bufptr);
|
|
|
+ sc->bufptr = NULL;
|
|
|
+ sc->bbuf = NULL;
|
|
|
+}
|
|
|
|
|
|
- sband->channels = sc->channels;
|
|
|
- sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
|
- AR5K_MODE_11G, max_c);
|
|
|
|
|
|
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
|
|
|
- count_c = sband->n_channels;
|
|
|
- max_c -= count_c;
|
|
|
- } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
|
|
|
- /* B mode */
|
|
|
- memcpy(sband->bitrates, &ath5k_rates[0],
|
|
|
- sizeof(struct ieee80211_rate) * 4);
|
|
|
- sband->n_bitrates = 4;
|
|
|
+/**************\
|
|
|
+* Queues setup *
|
|
|
+\**************/
|
|
|
|
|
|
- /* 5211 only supports B rates and uses 4bit rate codes
|
|
|
- * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
|
|
|
- * fix them up here:
|
|
|
+static struct ath5k_txq *
|
|
|
+ath5k_txq_setup(struct ath5k_softc *sc,
|
|
|
+ int qtype, int subtype)
|
|
|
+{
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct ath5k_txq *txq;
|
|
|
+ struct ath5k_txq_info qi = {
|
|
|
+ .tqi_subtype = subtype,
|
|
|
+ /* XXX: default values not correct for B and XR channels,
|
|
|
+ * but who cares? */
|
|
|
+ .tqi_aifs = AR5K_TUNE_AIFS,
|
|
|
+ .tqi_cw_min = AR5K_TUNE_CWMIN,
|
|
|
+ .tqi_cw_max = AR5K_TUNE_CWMAX
|
|
|
+ };
|
|
|
+ int qnum;
|
|
|
+
|
|
|
+ /*
|
|
|
+ * Enable interrupts only for EOL and DESC conditions.
|
|
|
+ * We mark tx descriptors to receive a DESC interrupt
|
|
|
+ * when a tx queue gets deep; otherwise we wait for the
|
|
|
+ * EOL to reap descriptors. Note that this is done to
|
|
|
+ * reduce interrupt load and this only defers reaping
|
|
|
+ * descriptors, never transmitting frames. Aside from
|
|
|
+ * reducing interrupts this also permits more concurrency.
|
|
|
+ * The only potential downside is if the tx queue backs
|
|
|
+ * up in which case the top half of the kernel may backup
|
|
|
+ * due to a lack of tx descriptors.
|
|
|
+ */
|
|
|
+ qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
|
|
|
+ AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
|
|
|
+ qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
|
|
|
+ if (qnum < 0) {
|
|
|
+ /*
|
|
|
+ * NB: don't print a message, this happens
|
|
|
+ * normally on parts with too few tx queues
|
|
|
*/
|
|
|
- if (ah->ah_version == AR5K_AR5211) {
|
|
|
- for (i = 0; i < 4; i++) {
|
|
|
- sband->bitrates[i].hw_value =
|
|
|
- sband->bitrates[i].hw_value & 0xF;
|
|
|
- sband->bitrates[i].hw_value_short =
|
|
|
- sband->bitrates[i].hw_value_short & 0xF;
|
|
|
- }
|
|
|
- }
|
|
|
+ return ERR_PTR(qnum);
|
|
|
+ }
|
|
|
+ if (qnum >= ARRAY_SIZE(sc->txqs)) {
|
|
|
+ ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
|
|
|
+ qnum, ARRAY_SIZE(sc->txqs));
|
|
|
+ ath5k_hw_release_tx_queue(ah, qnum);
|
|
|
+ return ERR_PTR(-EINVAL);
|
|
|
+ }
|
|
|
+ txq = &sc->txqs[qnum];
|
|
|
+ if (!txq->setup) {
|
|
|
+ txq->qnum = qnum;
|
|
|
+ txq->link = NULL;
|
|
|
+ INIT_LIST_HEAD(&txq->q);
|
|
|
+ spin_lock_init(&txq->lock);
|
|
|
+ txq->setup = true;
|
|
|
+ txq->txq_len = 0;
|
|
|
+ txq->txq_poll_mark = false;
|
|
|
+ txq->txq_stuck = 0;
|
|
|
+ }
|
|
|
+ return &sc->txqs[qnum];
|
|
|
+}
|
|
|
|
|
|
- sband->channels = sc->channels;
|
|
|
- sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
|
- AR5K_MODE_11B, max_c);
|
|
|
+static int
|
|
|
+ath5k_beaconq_setup(struct ath5k_hw *ah)
|
|
|
+{
|
|
|
+ struct ath5k_txq_info qi = {
|
|
|
+ /* XXX: default values not correct for B and XR channels,
|
|
|
+ * but who cares? */
|
|
|
+ .tqi_aifs = AR5K_TUNE_AIFS,
|
|
|
+ .tqi_cw_min = AR5K_TUNE_CWMIN,
|
|
|
+ .tqi_cw_max = AR5K_TUNE_CWMAX,
|
|
|
+ /* NB: for dynamic turbo, don't enable any other interrupts */
|
|
|
+ .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
|
|
|
+ };
|
|
|
+
|
|
|
+ return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
|
|
|
+}
|
|
|
|
|
|
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
|
|
|
- count_c = sband->n_channels;
|
|
|
- max_c -= count_c;
|
|
|
- }
|
|
|
- ath5k_setup_rate_idx(sc, sband);
|
|
|
+static int
|
|
|
+ath5k_beaconq_config(struct ath5k_softc *sc)
|
|
|
+{
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct ath5k_txq_info qi;
|
|
|
+ int ret;
|
|
|
|
|
|
- /* 5GHz band, A mode */
|
|
|
- if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
|
|
|
- sband = &sc->sbands[IEEE80211_BAND_5GHZ];
|
|
|
- sband->band = IEEE80211_BAND_5GHZ;
|
|
|
- sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
|
|
|
+ ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
|
|
|
+ if (ret)
|
|
|
+ goto err;
|
|
|
|
|
|
- memcpy(sband->bitrates, &ath5k_rates[4],
|
|
|
- sizeof(struct ieee80211_rate) * 8);
|
|
|
- sband->n_bitrates = 8;
|
|
|
+ if (sc->opmode == NL80211_IFTYPE_AP ||
|
|
|
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
|
|
|
+ /*
|
|
|
+ * Always burst out beacon and CAB traffic
|
|
|
+ * (aifs = cwmin = cwmax = 0)
|
|
|
+ */
|
|
|
+ qi.tqi_aifs = 0;
|
|
|
+ qi.tqi_cw_min = 0;
|
|
|
+ qi.tqi_cw_max = 0;
|
|
|
+ } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
|
+ /*
|
|
|
+ * Adhoc mode; backoff between 0 and (2 * cw_min).
|
|
|
+ */
|
|
|
+ qi.tqi_aifs = 0;
|
|
|
+ qi.tqi_cw_min = 0;
|
|
|
+ qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN;
|
|
|
+ }
|
|
|
|
|
|
- sband->channels = &sc->channels[count_c];
|
|
|
- sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
|
- AR5K_MODE_11A, max_c);
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
|
|
|
+ qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
|
|
|
|
|
|
- hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
|
|
|
+ ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
|
|
|
+ "hardware queue!\n", __func__);
|
|
|
+ goto err;
|
|
|
}
|
|
|
- ath5k_setup_rate_idx(sc, sband);
|
|
|
+ ret = ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */
|
|
|
+ if (ret)
|
|
|
+ goto err;
|
|
|
|
|
|
- ath5k_debug_dump_bands(sc);
|
|
|
+ /* reconfigure cabq with ready time to 80% of beacon_interval */
|
|
|
+ ret = ath5k_hw_get_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
|
|
|
+ if (ret)
|
|
|
+ goto err;
|
|
|
|
|
|
- return 0;
|
|
|
+ qi.tqi_ready_time = (sc->bintval * 80) / 100;
|
|
|
+ ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
|
|
|
+ if (ret)
|
|
|
+ goto err;
|
|
|
+
|
|
|
+ ret = ath5k_hw_reset_tx_queue(ah, AR5K_TX_QUEUE_ID_CAB);
|
|
|
+err:
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
-/*
|
|
|
- * Set/change channels. We always reset the chip.
|
|
|
- * To accomplish this we must first cleanup any pending DMA,
|
|
|
- * then restart stuff after a la ath5k_init.
|
|
|
- *
|
|
|
- * Called with sc->lock.
|
|
|
- */
|
|
|
-static int
|
|
|
-ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
|
|
|
+static void
|
|
|
+ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
|
|
|
{
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
- "channel set, resetting (%u -> %u MHz)\n",
|
|
|
- sc->curchan->center_freq, chan->center_freq);
|
|
|
+ struct ath5k_buf *bf, *bf0;
|
|
|
|
|
|
/*
|
|
|
- * To switch channels clear any pending DMA operations;
|
|
|
- * wait long enough for the RX fifo to drain, reset the
|
|
|
- * hardware at the new frequency, and then re-enable
|
|
|
- * the relevant bits of the h/w.
|
|
|
+ * NB: this assumes output has been stopped and
|
|
|
+ * we do not need to block ath5k_tx_tasklet
|
|
|
*/
|
|
|
- return ath5k_reset(sc, chan);
|
|
|
-}
|
|
|
+ spin_lock_bh(&txq->lock);
|
|
|
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
|
|
|
+ ath5k_debug_printtxbuf(sc, bf);
|
|
|
|
|
|
-static void
|
|
|
-ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
|
|
|
-{
|
|
|
- sc->curmode = mode;
|
|
|
+ ath5k_txbuf_free_skb(sc, bf);
|
|
|
|
|
|
- if (mode == AR5K_MODE_11A) {
|
|
|
- sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ];
|
|
|
- } else {
|
|
|
- sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ];
|
|
|
+ spin_lock_bh(&sc->txbuflock);
|
|
|
+ list_move_tail(&bf->list, &sc->txbuf);
|
|
|
+ sc->txbuf_len++;
|
|
|
+ txq->txq_len--;
|
|
|
+ spin_unlock_bh(&sc->txbuflock);
|
|
|
}
|
|
|
+ txq->link = NULL;
|
|
|
+ txq->txq_poll_mark = false;
|
|
|
+ spin_unlock_bh(&txq->lock);
|
|
|
}
|
|
|
|
|
|
+/*
|
|
|
+ * Drain the transmit queues and reclaim resources.
|
|
|
+ */
|
|
|
static void
|
|
|
-ath5k_mode_setup(struct ath5k_softc *sc)
|
|
|
+ath5k_txq_cleanup(struct ath5k_softc *sc)
|
|
|
{
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- u32 rfilt;
|
|
|
-
|
|
|
- /* configure rx filter */
|
|
|
- rfilt = sc->filter_flags;
|
|
|
- ath5k_hw_set_rx_filter(ah, rfilt);
|
|
|
-
|
|
|
- if (ath5k_hw_hasbssidmask(ah))
|
|
|
- ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
|
|
|
+ unsigned int i;
|
|
|
|
|
|
- /* configure operational mode */
|
|
|
- ath5k_hw_set_opmode(ah, sc->opmode);
|
|
|
+ /* XXX return value */
|
|
|
+ if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
|
|
|
+ /* don't touch the hardware if marked invalid */
|
|
|
+ ath5k_hw_stop_tx_dma(ah, sc->bhalq);
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
|
|
|
+ ath5k_hw_get_txdp(ah, sc->bhalq));
|
|
|
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
|
|
|
+ if (sc->txqs[i].setup) {
|
|
|
+ ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
|
|
|
+ "link %p\n",
|
|
|
+ sc->txqs[i].qnum,
|
|
|
+ ath5k_hw_get_txdp(ah,
|
|
|
+ sc->txqs[i].qnum),
|
|
|
+ sc->txqs[i].link);
|
|
|
+ }
|
|
|
+ }
|
|
|
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d\n", sc->opmode);
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
|
|
|
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
|
|
|
+ if (sc->txqs[i].setup)
|
|
|
+ ath5k_txq_drainq(sc, &sc->txqs[i]);
|
|
|
}
|
|
|
|
|
|
-static inline int
|
|
|
-ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
|
|
|
+static void
|
|
|
+ath5k_txq_release(struct ath5k_softc *sc)
|
|
|
{
|
|
|
- int rix;
|
|
|
-
|
|
|
- /* return base rate on errors */
|
|
|
- if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
|
|
|
- "hw_rix out of bounds: %x\n", hw_rix))
|
|
|
- return 0;
|
|
|
-
|
|
|
- rix = sc->rate_idx[sc->curband->band][hw_rix];
|
|
|
- if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
|
|
|
- rix = 0;
|
|
|
+ struct ath5k_txq *txq = sc->txqs;
|
|
|
+ unsigned int i;
|
|
|
|
|
|
- return rix;
|
|
|
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
|
|
|
+ if (txq->setup) {
|
|
|
+ ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
|
|
|
+ txq->setup = false;
|
|
|
+ }
|
|
|
}
|
|
|
|
|
|
-/***************\
|
|
|
-* Buffers setup *
|
|
|
-\***************/
|
|
|
-
|
|
|
-static
|
|
|
-struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
|
|
|
-{
|
|
|
- struct ath_common *common = ath5k_hw_common(sc->ah);
|
|
|
- struct sk_buff *skb;
|
|
|
-
|
|
|
- /*
|
|
|
- * Allocate buffer with headroom_needed space for the
|
|
|
- * fake physical layer header at the start.
|
|
|
- */
|
|
|
- skb = ath_rxbuf_alloc(common,
|
|
|
- common->rx_bufsize,
|
|
|
- GFP_ATOMIC);
|
|
|
-
|
|
|
- if (!skb) {
|
|
|
- ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
|
|
|
- common->rx_bufsize);
|
|
|
- return NULL;
|
|
|
- }
|
|
|
|
|
|
- *skb_addr = pci_map_single(sc->pdev,
|
|
|
- skb->data, common->rx_bufsize,
|
|
|
- PCI_DMA_FROMDEVICE);
|
|
|
- if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
|
|
|
- ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
|
|
|
- dev_kfree_skb(skb);
|
|
|
- return NULL;
|
|
|
- }
|
|
|
- return skb;
|
|
|
-}
|
|
|
+/*************\
|
|
|
+* RX Handling *
|
|
|
+\*************/
|
|
|
|
|
|
+/*
|
|
|
+ * Enable the receive h/w following a reset.
|
|
|
+ */
|
|
|
static int
|
|
|
-ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
|
|
|
+ath5k_rx_start(struct ath5k_softc *sc)
|
|
|
{
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- struct sk_buff *skb = bf->skb;
|
|
|
- struct ath5k_desc *ds;
|
|
|
+ struct ath_common *common = ath5k_hw_common(ah);
|
|
|
+ struct ath5k_buf *bf;
|
|
|
int ret;
|
|
|
|
|
|
- if (!skb) {
|
|
|
- skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr);
|
|
|
- if (!skb)
|
|
|
- return -ENOMEM;
|
|
|
- bf->skb = skb;
|
|
|
- }
|
|
|
+ common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz);
|
|
|
|
|
|
- /*
|
|
|
- * Setup descriptors. For receive we always terminate
|
|
|
- * the descriptor list with a self-linked entry so we'll
|
|
|
- * not get overrun under high load (as can happen with a
|
|
|
- * 5212 when ANI processing enables PHY error frames).
|
|
|
- *
|
|
|
- * To ensure the last descriptor is self-linked we create
|
|
|
- * each descriptor as self-linked and add it to the end. As
|
|
|
- * each additional descriptor is added the previous self-linked
|
|
|
- * entry is "fixed" naturally. This should be safe even
|
|
|
- * if DMA is happening. When processing RX interrupts we
|
|
|
- * never remove/process the last, self-linked, entry on the
|
|
|
- * descriptor list. This ensures the hardware always has
|
|
|
- * someplace to write a new frame.
|
|
|
- */
|
|
|
- ds = bf->desc;
|
|
|
- ds->ds_link = bf->daddr; /* link to self */
|
|
|
- ds->ds_data = bf->skbaddr;
|
|
|
- ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "%s: could not setup RX desc\n", __func__);
|
|
|
- return ret;
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
|
|
|
+ common->cachelsz, common->rx_bufsize);
|
|
|
+
|
|
|
+ spin_lock_bh(&sc->rxbuflock);
|
|
|
+ sc->rxlink = NULL;
|
|
|
+ list_for_each_entry(bf, &sc->rxbuf, list) {
|
|
|
+ ret = ath5k_rxbuf_setup(sc, bf);
|
|
|
+ if (ret != 0) {
|
|
|
+ spin_unlock_bh(&sc->rxbuflock);
|
|
|
+ goto err;
|
|
|
+ }
|
|
|
}
|
|
|
+ bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
|
|
|
+ ath5k_hw_set_rxdp(ah, bf->daddr);
|
|
|
+ spin_unlock_bh(&sc->rxbuflock);
|
|
|
+
|
|
|
+ ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
|
|
|
+ ath5k_mode_setup(sc); /* set filters, etc. */
|
|
|
+ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
|
|
|
|
|
|
- if (sc->rxlink != NULL)
|
|
|
- *sc->rxlink = bf->daddr;
|
|
|
- sc->rxlink = &ds->ds_link;
|
|
|
return 0;
|
|
|
+err:
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
-static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
|
|
|
+/*
|
|
|
+ * Disable the receive h/w in preparation for a reset.
|
|
|
+ */
|
|
|
+static void
|
|
|
+ath5k_rx_stop(struct ath5k_softc *sc)
|
|
|
{
|
|
|
- struct ieee80211_hdr *hdr;
|
|
|
- enum ath5k_pkt_type htype;
|
|
|
- __le16 fc;
|
|
|
-
|
|
|
- hdr = (struct ieee80211_hdr *)skb->data;
|
|
|
- fc = hdr->frame_control;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
|
|
|
- if (ieee80211_is_beacon(fc))
|
|
|
- htype = AR5K_PKT_TYPE_BEACON;
|
|
|
- else if (ieee80211_is_probe_resp(fc))
|
|
|
- htype = AR5K_PKT_TYPE_PROBE_RESP;
|
|
|
- else if (ieee80211_is_atim(fc))
|
|
|
- htype = AR5K_PKT_TYPE_ATIM;
|
|
|
- else if (ieee80211_is_pspoll(fc))
|
|
|
- htype = AR5K_PKT_TYPE_PSPOLL;
|
|
|
- else
|
|
|
- htype = AR5K_PKT_TYPE_NORMAL;
|
|
|
+ ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
|
|
|
+ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
|
|
|
+ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
|
|
|
|
|
|
- return htype;
|
|
|
+ ath5k_debug_printrxbuffs(sc, ah);
|
|
|
}
|
|
|
|
|
|
-static int
|
|
|
-ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
|
|
|
- struct ath5k_txq *txq, int padsize)
|
|
|
+static unsigned int
|
|
|
+ath5k_rx_decrypted(struct ath5k_softc *sc, struct sk_buff *skb,
|
|
|
+ struct ath5k_rx_status *rs)
|
|
|
{
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath5k_desc *ds = bf->desc;
|
|
|
- struct sk_buff *skb = bf->skb;
|
|
|
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
|
- unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
|
|
|
- struct ieee80211_rate *rate;
|
|
|
- unsigned int mrr_rate[3], mrr_tries[3];
|
|
|
- int i, ret;
|
|
|
- u16 hw_rate;
|
|
|
- u16 cts_rate = 0;
|
|
|
- u16 duration = 0;
|
|
|
- u8 rc_flags;
|
|
|
+ struct ath_common *common = ath5k_hw_common(ah);
|
|
|
+ struct ieee80211_hdr *hdr = (void *)skb->data;
|
|
|
+ unsigned int keyix, hlen;
|
|
|
|
|
|
- flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
|
|
|
+ if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
|
|
|
+ rs->rs_keyix != AR5K_RXKEYIX_INVALID)
|
|
|
+ return RX_FLAG_DECRYPTED;
|
|
|
|
|
|
- /* XXX endianness */
|
|
|
- bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
|
|
|
- PCI_DMA_TODEVICE);
|
|
|
+ /* Apparently when a default key is used to decrypt the packet
|
|
|
+ the hw does not set the index used to decrypt. In such cases
|
|
|
+ get the index from the packet. */
|
|
|
+ hlen = ieee80211_hdrlen(hdr->frame_control);
|
|
|
+ if (ieee80211_has_protected(hdr->frame_control) &&
|
|
|
+ !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
|
|
|
+ skb->len >= hlen + 4) {
|
|
|
+ keyix = skb->data[hlen + 3] >> 6;
|
|
|
|
|
|
- rate = ieee80211_get_tx_rate(sc->hw, info);
|
|
|
- if (!rate) {
|
|
|
- ret = -EINVAL;
|
|
|
- goto err_unmap;
|
|
|
+ if (test_bit(keyix, common->keymap))
|
|
|
+ return RX_FLAG_DECRYPTED;
|
|
|
}
|
|
|
|
|
|
- if (info->flags & IEEE80211_TX_CTL_NO_ACK)
|
|
|
- flags |= AR5K_TXDESC_NOACK;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- rc_flags = info->control.rates[0].flags;
|
|
|
- hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
|
|
|
- rate->hw_value_short : rate->hw_value;
|
|
|
|
|
|
- pktlen = skb->len;
|
|
|
+static void
|
|
|
+ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
|
|
|
+ struct ieee80211_rx_status *rxs)
|
|
|
+{
|
|
|
+ struct ath_common *common = ath5k_hw_common(sc->ah);
|
|
|
+ u64 tsf, bc_tstamp;
|
|
|
+ u32 hw_tu;
|
|
|
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
|
|
|
|
|
|
- /* FIXME: If we are in g mode and rate is a CCK rate
|
|
|
- * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
|
|
|
- * from tx power (value is in dB units already) */
|
|
|
- if (info->control.hw_key) {
|
|
|
- keyidx = info->control.hw_key->hw_key_idx;
|
|
|
- pktlen += info->control.hw_key->icv_len;
|
|
|
- }
|
|
|
- if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
|
|
|
- flags |= AR5K_TXDESC_RTSENA;
|
|
|
- cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
|
|
|
- duration = le16_to_cpu(ieee80211_rts_duration(sc->hw,
|
|
|
- sc->vif, pktlen, info));
|
|
|
- }
|
|
|
- if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
|
|
|
- flags |= AR5K_TXDESC_CTSENA;
|
|
|
- cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
|
|
|
- duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw,
|
|
|
- sc->vif, pktlen, info));
|
|
|
- }
|
|
|
- ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
|
|
|
- ieee80211_get_hdrlen_from_skb(skb), padsize,
|
|
|
- get_hw_packet_type(skb),
|
|
|
- (sc->power_level * 2),
|
|
|
- hw_rate,
|
|
|
- info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
|
|
|
- cts_rate, duration);
|
|
|
- if (ret)
|
|
|
- goto err_unmap;
|
|
|
+ if (ieee80211_is_beacon(mgmt->frame_control) &&
|
|
|
+ le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
|
|
|
+ memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) {
|
|
|
+ /*
|
|
|
+ * Received an IBSS beacon with the same BSSID. Hardware *must*
|
|
|
+ * have updated the local TSF. We have to work around various
|
|
|
+ * hardware bugs, though...
|
|
|
+ */
|
|
|
+ tsf = ath5k_hw_get_tsf64(sc->ah);
|
|
|
+ bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
|
|
|
+ hw_tu = TSF_TO_TU(tsf);
|
|
|
|
|
|
- memset(mrr_rate, 0, sizeof(mrr_rate));
|
|
|
- memset(mrr_tries, 0, sizeof(mrr_tries));
|
|
|
- for (i = 0; i < 3; i++) {
|
|
|
- rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
|
|
|
- if (!rate)
|
|
|
- break;
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
|
|
|
+ (unsigned long long)bc_tstamp,
|
|
|
+ (unsigned long long)rxs->mactime,
|
|
|
+ (unsigned long long)(rxs->mactime - bc_tstamp),
|
|
|
+ (unsigned long long)tsf);
|
|
|
|
|
|
- mrr_rate[i] = rate->hw_value;
|
|
|
- mrr_tries[i] = info->control.rates[i + 1].count;
|
|
|
- }
|
|
|
+ /*
|
|
|
+ * Sometimes the HW will give us a wrong tstamp in the rx
|
|
|
+ * status, causing the timestamp extension to go wrong.
|
|
|
+ * (This seems to happen especially with beacon frames bigger
|
|
|
+ * than 78 byte (incl. FCS))
|
|
|
+ * But we know that the receive timestamp must be later than the
|
|
|
+ * timestamp of the beacon since HW must have synced to that.
|
|
|
+ *
|
|
|
+ * NOTE: here we assume mactime to be after the frame was
|
|
|
+ * received, not like mac80211 which defines it at the start.
|
|
|
+ */
|
|
|
+ if (bc_tstamp > rxs->mactime) {
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "fixing mactime from %llx to %llx\n",
|
|
|
+ (unsigned long long)rxs->mactime,
|
|
|
+ (unsigned long long)tsf);
|
|
|
+ rxs->mactime = tsf;
|
|
|
+ }
|
|
|
|
|
|
- ath5k_hw_setup_mrr_tx_desc(ah, ds,
|
|
|
- mrr_rate[0], mrr_tries[0],
|
|
|
- mrr_rate[1], mrr_tries[1],
|
|
|
- mrr_rate[2], mrr_tries[2]);
|
|
|
+ /*
|
|
|
+ * Local TSF might have moved higher than our beacon timers,
|
|
|
+ * in that case we have to update them to continue sending
|
|
|
+ * beacons. This also takes care of synchronizing beacon sending
|
|
|
+ * times with other stations.
|
|
|
+ */
|
|
|
+ if (hw_tu >= sc->nexttbtt)
|
|
|
+ ath5k_beacon_update_timers(sc, bc_tstamp);
|
|
|
+ }
|
|
|
+}
|
|
|
|
|
|
- ds->ds_link = 0;
|
|
|
- ds->ds_data = bf->skbaddr;
|
|
|
+static void
|
|
|
+ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi)
|
|
|
+{
|
|
|
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct ath_common *common = ath5k_hw_common(ah);
|
|
|
|
|
|
- spin_lock_bh(&txq->lock);
|
|
|
- list_add_tail(&bf->list, &txq->q);
|
|
|
- if (txq->link == NULL) /* is this first packet? */
|
|
|
- ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
|
|
|
- else /* no, so only link it */
|
|
|
- *txq->link = bf->daddr;
|
|
|
+ /* only beacons from our BSSID */
|
|
|
+ if (!ieee80211_is_beacon(mgmt->frame_control) ||
|
|
|
+ memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0)
|
|
|
+ return;
|
|
|
|
|
|
- txq->link = &ds->ds_link;
|
|
|
- ath5k_hw_start_tx_dma(ah, txq->qnum);
|
|
|
- mmiowb();
|
|
|
- spin_unlock_bh(&txq->lock);
|
|
|
+ ah->ah_beacon_rssi_avg = ath5k_moving_average(ah->ah_beacon_rssi_avg,
|
|
|
+ rssi);
|
|
|
|
|
|
- return 0;
|
|
|
-err_unmap:
|
|
|
- pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
|
|
|
- return ret;
|
|
|
+ /* in IBSS mode we should keep RSSI statistics per neighbour */
|
|
|
+ /* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */
|
|
|
}
|
|
|
|
|
|
-/*******************\
|
|
|
-* Descriptors setup *
|
|
|
-\*******************/
|
|
|
-
|
|
|
-static int
|
|
|
-ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
|
|
|
+/*
|
|
|
+ * Compute padding position. skb must contain an IEEE 802.11 frame
|
|
|
+ */
|
|
|
+static int ath5k_common_padpos(struct sk_buff *skb)
|
|
|
{
|
|
|
- struct ath5k_desc *ds;
|
|
|
- struct ath5k_buf *bf;
|
|
|
- dma_addr_t da;
|
|
|
- unsigned int i;
|
|
|
- int ret;
|
|
|
+ struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
|
|
|
+ __le16 frame_control = hdr->frame_control;
|
|
|
+ int padpos = 24;
|
|
|
|
|
|
- /* allocate descriptors */
|
|
|
- sc->desc_len = sizeof(struct ath5k_desc) *
|
|
|
- (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
|
|
|
- sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
|
|
|
- if (sc->desc == NULL) {
|
|
|
- ATH5K_ERR(sc, "can't allocate descriptors\n");
|
|
|
- ret = -ENOMEM;
|
|
|
- goto err;
|
|
|
+ if (ieee80211_has_a4(frame_control)) {
|
|
|
+ padpos += ETH_ALEN;
|
|
|
}
|
|
|
- ds = sc->desc;
|
|
|
- da = sc->desc_daddr;
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
|
|
|
- ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
|
|
|
+ if (ieee80211_is_data_qos(frame_control)) {
|
|
|
+ padpos += IEEE80211_QOS_CTL_LEN;
|
|
|
+ }
|
|
|
+
|
|
|
+ return padpos;
|
|
|
+}
|
|
|
+
|
|
|
+/*
|
|
|
+ * This function expects an 802.11 frame and returns the number of
|
|
|
+ * bytes added, or -1 if we don't have enough header room.
|
|
|
+ */
|
|
|
+static int ath5k_add_padding(struct sk_buff *skb)
|
|
|
+{
|
|
|
+ int padpos = ath5k_common_padpos(skb);
|
|
|
+ int padsize = padpos & 3;
|
|
|
|
|
|
- bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
|
|
|
- sizeof(struct ath5k_buf), GFP_KERNEL);
|
|
|
- if (bf == NULL) {
|
|
|
- ATH5K_ERR(sc, "can't allocate bufptr\n");
|
|
|
- ret = -ENOMEM;
|
|
|
- goto err_free;
|
|
|
- }
|
|
|
- sc->bufptr = bf;
|
|
|
+ if (padsize && skb->len>padpos) {
|
|
|
|
|
|
- INIT_LIST_HEAD(&sc->rxbuf);
|
|
|
- for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
|
|
|
- bf->desc = ds;
|
|
|
- bf->daddr = da;
|
|
|
- list_add_tail(&bf->list, &sc->rxbuf);
|
|
|
- }
|
|
|
+ if (skb_headroom(skb) < padsize)
|
|
|
+ return -1;
|
|
|
|
|
|
- INIT_LIST_HEAD(&sc->txbuf);
|
|
|
- sc->txbuf_len = ATH_TXBUF;
|
|
|
- for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
|
|
|
- da += sizeof(*ds)) {
|
|
|
- bf->desc = ds;
|
|
|
- bf->daddr = da;
|
|
|
- list_add_tail(&bf->list, &sc->txbuf);
|
|
|
+ skb_push(skb, padsize);
|
|
|
+ memmove(skb->data, skb->data+padsize, padpos);
|
|
|
+ return padsize;
|
|
|
}
|
|
|
|
|
|
- /* beacon buffer */
|
|
|
- bf->desc = ds;
|
|
|
- bf->daddr = da;
|
|
|
- sc->bbuf = bf;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+/*
|
|
|
+ * The MAC header is padded to have 32-bit boundary if the
|
|
|
+ * packet payload is non-zero. The general calculation for
|
|
|
+ * padsize would take into account odd header lengths:
|
|
|
+ * padsize = 4 - (hdrlen & 3); however, since only
|
|
|
+ * even-length headers are used, padding can only be 0 or 2
|
|
|
+ * bytes and we can optimize this a bit. We must not try to
|
|
|
+ * remove padding from short control frames that do not have a
|
|
|
+ * payload.
|
|
|
+ *
|
|
|
+ * This function expects an 802.11 frame and returns the number of
|
|
|
+ * bytes removed.
|
|
|
+ */
|
|
|
+static int ath5k_remove_padding(struct sk_buff *skb)
|
|
|
+{
|
|
|
+ int padpos = ath5k_common_padpos(skb);
|
|
|
+ int padsize = padpos & 3;
|
|
|
+
|
|
|
+ if (padsize && skb->len>=padpos+padsize) {
|
|
|
+ memmove(skb->data + padsize, skb->data, padpos);
|
|
|
+ skb_pull(skb, padsize);
|
|
|
+ return padsize;
|
|
|
+ }
|
|
|
|
|
|
return 0;
|
|
|
-err_free:
|
|
|
- pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
|
|
|
-err:
|
|
|
- sc->desc = NULL;
|
|
|
- return ret;
|
|
|
}
|
|
|
|
|
|
static void
|
|
|
-ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
|
|
|
+ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb,
|
|
|
+ struct ath5k_rx_status *rs)
|
|
|
{
|
|
|
- struct ath5k_buf *bf;
|
|
|
+ struct ieee80211_rx_status *rxs;
|
|
|
|
|
|
- ath5k_txbuf_free_skb(sc, sc->bbuf);
|
|
|
- list_for_each_entry(bf, &sc->txbuf, list)
|
|
|
- ath5k_txbuf_free_skb(sc, bf);
|
|
|
- list_for_each_entry(bf, &sc->rxbuf, list)
|
|
|
- ath5k_rxbuf_free_skb(sc, bf);
|
|
|
+ ath5k_remove_padding(skb);
|
|
|
|
|
|
- /* Free memory associated with all descriptors */
|
|
|
- pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
|
|
|
- sc->desc = NULL;
|
|
|
- sc->desc_daddr = 0;
|
|
|
+ rxs = IEEE80211_SKB_RXCB(skb);
|
|
|
|
|
|
- kfree(sc->bufptr);
|
|
|
- sc->bufptr = NULL;
|
|
|
- sc->bbuf = NULL;
|
|
|
-}
|
|
|
+ rxs->flag = 0;
|
|
|
+ if (unlikely(rs->rs_status & AR5K_RXERR_MIC))
|
|
|
+ rxs->flag |= RX_FLAG_MMIC_ERROR;
|
|
|
|
|
|
+ /*
|
|
|
+ * always extend the mac timestamp, since this information is
|
|
|
+ * also needed for proper IBSS merging.
|
|
|
+ *
|
|
|
+ * XXX: it might be too late to do it here, since rs_tstamp is
|
|
|
+ * 15bit only. that means TSF extension has to be done within
|
|
|
+ * 32768usec (about 32ms). it might be necessary to move this to
|
|
|
+ * the interrupt handler, like it is done in madwifi.
|
|
|
+ *
|
|
|
+ * Unfortunately we don't know when the hardware takes the rx
|
|
|
+ * timestamp (beginning of phy frame, data frame, end of rx?).
|
|
|
+ * The only thing we know is that it is hardware specific...
|
|
|
+ * On AR5213 it seems the rx timestamp is at the end of the
|
|
|
+ * frame, but i'm not sure.
|
|
|
+ *
|
|
|
+ * NOTE: mac80211 defines mactime at the beginning of the first
|
|
|
+ * data symbol. Since we don't have any time references it's
|
|
|
+ * impossible to comply to that. This affects IBSS merge only
|
|
|
+ * right now, so it's not too bad...
|
|
|
+ */
|
|
|
+ rxs->mactime = ath5k_extend_tsf(sc->ah, rs->rs_tstamp);
|
|
|
+ rxs->flag |= RX_FLAG_TSFT;
|
|
|
|
|
|
+ rxs->freq = sc->curchan->center_freq;
|
|
|
+ rxs->band = sc->curband->band;
|
|
|
|
|
|
+ rxs->signal = sc->ah->ah_noise_floor + rs->rs_rssi;
|
|
|
|
|
|
+ rxs->antenna = rs->rs_antenna;
|
|
|
|
|
|
-/**************\
|
|
|
-* Queues setup *
|
|
|
-\**************/
|
|
|
+ if (rs->rs_antenna > 0 && rs->rs_antenna < 5)
|
|
|
+ sc->stats.antenna_rx[rs->rs_antenna]++;
|
|
|
+ else
|
|
|
+ sc->stats.antenna_rx[0]++; /* invalid */
|
|
|
|
|
|
-static struct ath5k_txq *
|
|
|
-ath5k_txq_setup(struct ath5k_softc *sc,
|
|
|
- int qtype, int subtype)
|
|
|
-{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath5k_txq *txq;
|
|
|
- struct ath5k_txq_info qi = {
|
|
|
- .tqi_subtype = subtype,
|
|
|
- .tqi_aifs = AR5K_TXQ_USEDEFAULT,
|
|
|
- .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
|
|
|
- .tqi_cw_max = AR5K_TXQ_USEDEFAULT
|
|
|
- };
|
|
|
- int qnum;
|
|
|
+ rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs->rs_rate);
|
|
|
+ rxs->flag |= ath5k_rx_decrypted(sc, skb, rs);
|
|
|
|
|
|
- /*
|
|
|
- * Enable interrupts only for EOL and DESC conditions.
|
|
|
- * We mark tx descriptors to receive a DESC interrupt
|
|
|
- * when a tx queue gets deep; otherwise we wait for the
|
|
|
- * EOL to reap descriptors. Note that this is done to
|
|
|
- * reduce interrupt load and this only defers reaping
|
|
|
- * descriptors, never transmitting frames. Aside from
|
|
|
- * reducing interrupts this also permits more concurrency.
|
|
|
- * The only potential downside is if the tx queue backs
|
|
|
- * up in which case the top half of the kernel may backup
|
|
|
- * due to a lack of tx descriptors.
|
|
|
- */
|
|
|
- qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
|
|
|
- AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
|
|
|
- qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
|
|
|
- if (qnum < 0) {
|
|
|
- /*
|
|
|
- * NB: don't print a message, this happens
|
|
|
- * normally on parts with too few tx queues
|
|
|
- */
|
|
|
- return ERR_PTR(qnum);
|
|
|
- }
|
|
|
- if (qnum >= ARRAY_SIZE(sc->txqs)) {
|
|
|
- ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
|
|
|
- qnum, ARRAY_SIZE(sc->txqs));
|
|
|
- ath5k_hw_release_tx_queue(ah, qnum);
|
|
|
- return ERR_PTR(-EINVAL);
|
|
|
- }
|
|
|
- txq = &sc->txqs[qnum];
|
|
|
- if (!txq->setup) {
|
|
|
- txq->qnum = qnum;
|
|
|
- txq->link = NULL;
|
|
|
- INIT_LIST_HEAD(&txq->q);
|
|
|
- spin_lock_init(&txq->lock);
|
|
|
- txq->setup = true;
|
|
|
- }
|
|
|
- return &sc->txqs[qnum];
|
|
|
-}
|
|
|
+ if (rxs->rate_idx >= 0 && rs->rs_rate ==
|
|
|
+ sc->curband->bitrates[rxs->rate_idx].hw_value_short)
|
|
|
+ rxs->flag |= RX_FLAG_SHORTPRE;
|
|
|
|
|
|
-static int
|
|
|
-ath5k_beaconq_setup(struct ath5k_hw *ah)
|
|
|
-{
|
|
|
- struct ath5k_txq_info qi = {
|
|
|
- .tqi_aifs = AR5K_TXQ_USEDEFAULT,
|
|
|
- .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
|
|
|
- .tqi_cw_max = AR5K_TXQ_USEDEFAULT,
|
|
|
- /* NB: for dynamic turbo, don't enable any other interrupts */
|
|
|
- .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
|
|
|
- };
|
|
|
+ ath5k_debug_dump_skb(sc, skb, "RX ", 0);
|
|
|
|
|
|
- return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
|
|
|
-}
|
|
|
+ ath5k_update_beacon_rssi(sc, skb, rs->rs_rssi);
|
|
|
|
|
|
-static int
|
|
|
-ath5k_beaconq_config(struct ath5k_softc *sc)
|
|
|
-{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath5k_txq_info qi;
|
|
|
- int ret;
|
|
|
+ /* check beacons in IBSS mode */
|
|
|
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
|
|
|
+ ath5k_check_ibss_tsf(sc, skb, rxs);
|
|
|
|
|
|
- ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
|
|
|
- if (ret)
|
|
|
- goto err;
|
|
|
+ ieee80211_rx(sc->hw, skb);
|
|
|
+}
|
|
|
|
|
|
- if (sc->opmode == NL80211_IFTYPE_AP ||
|
|
|
- sc->opmode == NL80211_IFTYPE_MESH_POINT) {
|
|
|
- /*
|
|
|
- * Always burst out beacon and CAB traffic
|
|
|
- * (aifs = cwmin = cwmax = 0)
|
|
|
- */
|
|
|
- qi.tqi_aifs = 0;
|
|
|
- qi.tqi_cw_min = 0;
|
|
|
- qi.tqi_cw_max = 0;
|
|
|
- } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
|
- /*
|
|
|
- * Adhoc mode; backoff between 0 and (2 * cw_min).
|
|
|
- */
|
|
|
- qi.tqi_aifs = 0;
|
|
|
- qi.tqi_cw_min = 0;
|
|
|
- qi.tqi_cw_max = 2 * ah->ah_cw_min;
|
|
|
- }
|
|
|
+/** ath5k_frame_receive_ok() - Do we want to receive this frame or not?
|
|
|
+ *
|
|
|
+ * Check if we want to further process this frame or not. Also update
|
|
|
+ * statistics. Return true if we want this frame, false if not.
|
|
|
+ */
|
|
|
+static bool
|
|
|
+ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs)
|
|
|
+{
|
|
|
+ sc->stats.rx_all_count++;
|
|
|
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
|
|
|
- qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
|
|
|
+ if (unlikely(rs->rs_status)) {
|
|
|
+ if (rs->rs_status & AR5K_RXERR_CRC)
|
|
|
+ sc->stats.rxerr_crc++;
|
|
|
+ if (rs->rs_status & AR5K_RXERR_FIFO)
|
|
|
+ sc->stats.rxerr_fifo++;
|
|
|
+ if (rs->rs_status & AR5K_RXERR_PHY) {
|
|
|
+ sc->stats.rxerr_phy++;
|
|
|
+ if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32)
|
|
|
+ sc->stats.rxerr_phy_code[rs->rs_phyerr]++;
|
|
|
+ return false;
|
|
|
+ }
|
|
|
+ if (rs->rs_status & AR5K_RXERR_DECRYPT) {
|
|
|
+ /*
|
|
|
+ * Decrypt error. If the error occurred
|
|
|
+ * because there was no hardware key, then
|
|
|
+ * let the frame through so the upper layers
|
|
|
+ * can process it. This is necessary for 5210
|
|
|
+ * parts which have no way to setup a ``clear''
|
|
|
+ * key cache entry.
|
|
|
+ *
|
|
|
+ * XXX do key cache faulting
|
|
|
+ */
|
|
|
+ sc->stats.rxerr_decrypt++;
|
|
|
+ if (rs->rs_keyix == AR5K_RXKEYIX_INVALID &&
|
|
|
+ !(rs->rs_status & AR5K_RXERR_CRC))
|
|
|
+ return true;
|
|
|
+ }
|
|
|
+ if (rs->rs_status & AR5K_RXERR_MIC) {
|
|
|
+ sc->stats.rxerr_mic++;
|
|
|
+ return true;
|
|
|
+ }
|
|
|
|
|
|
- ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
|
|
|
- "hardware queue!\n", __func__);
|
|
|
- goto err;
|
|
|
+ /* reject any frames with non-crypto errors */
|
|
|
+ if (rs->rs_status & ~(AR5K_RXERR_DECRYPT))
|
|
|
+ return false;
|
|
|
}
|
|
|
- ret = ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */
|
|
|
- if (ret)
|
|
|
- goto err;
|
|
|
-
|
|
|
- /* reconfigure cabq with ready time to 80% of beacon_interval */
|
|
|
- ret = ath5k_hw_get_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
|
|
|
- if (ret)
|
|
|
- goto err;
|
|
|
-
|
|
|
- qi.tqi_ready_time = (sc->bintval * 80) / 100;
|
|
|
- ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
|
|
|
- if (ret)
|
|
|
- goto err;
|
|
|
|
|
|
- ret = ath5k_hw_reset_tx_queue(ah, AR5K_TX_QUEUE_ID_CAB);
|
|
|
-err:
|
|
|
- return ret;
|
|
|
+ if (unlikely(rs->rs_more)) {
|
|
|
+ sc->stats.rxerr_jumbo++;
|
|
|
+ return false;
|
|
|
+ }
|
|
|
+ return true;
|
|
|
}
|
|
|
|
|
|
static void
|
|
|
-ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
|
|
|
+ath5k_tasklet_rx(unsigned long data)
|
|
|
{
|
|
|
- struct ath5k_buf *bf, *bf0;
|
|
|
+ struct ath5k_rx_status rs = {};
|
|
|
+ struct sk_buff *skb, *next_skb;
|
|
|
+ dma_addr_t next_skb_addr;
|
|
|
+ struct ath5k_softc *sc = (void *)data;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct ath_common *common = ath5k_hw_common(ah);
|
|
|
+ struct ath5k_buf *bf;
|
|
|
+ struct ath5k_desc *ds;
|
|
|
+ int ret;
|
|
|
|
|
|
- /*
|
|
|
- * NB: this assumes output has been stopped and
|
|
|
- * we do not need to block ath5k_tx_tasklet
|
|
|
- */
|
|
|
- spin_lock_bh(&txq->lock);
|
|
|
- list_for_each_entry_safe(bf, bf0, &txq->q, list) {
|
|
|
- ath5k_debug_printtxbuf(sc, bf);
|
|
|
+ spin_lock(&sc->rxbuflock);
|
|
|
+ if (list_empty(&sc->rxbuf)) {
|
|
|
+ ATH5K_WARN(sc, "empty rx buf pool\n");
|
|
|
+ goto unlock;
|
|
|
+ }
|
|
|
+ do {
|
|
|
+ bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
|
|
|
+ BUG_ON(bf->skb == NULL);
|
|
|
+ skb = bf->skb;
|
|
|
+ ds = bf->desc;
|
|
|
|
|
|
- ath5k_txbuf_free_skb(sc, bf);
|
|
|
+ /* bail if HW is still using self-linked descriptor */
|
|
|
+ if (ath5k_hw_get_rxdp(sc->ah) == bf->daddr)
|
|
|
+ break;
|
|
|
|
|
|
- spin_lock_bh(&sc->txbuflock);
|
|
|
- list_move_tail(&bf->list, &sc->txbuf);
|
|
|
- sc->txbuf_len++;
|
|
|
- spin_unlock_bh(&sc->txbuflock);
|
|
|
- }
|
|
|
- txq->link = NULL;
|
|
|
- spin_unlock_bh(&txq->lock);
|
|
|
-}
|
|
|
+ ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
|
|
|
+ if (unlikely(ret == -EINPROGRESS))
|
|
|
+ break;
|
|
|
+ else if (unlikely(ret)) {
|
|
|
+ ATH5K_ERR(sc, "error in processing rx descriptor\n");
|
|
|
+ sc->stats.rxerr_proc++;
|
|
|
+ break;
|
|
|
+ }
|
|
|
|
|
|
-/*
|
|
|
- * Drain the transmit queues and reclaim resources.
|
|
|
- */
|
|
|
-static void
|
|
|
-ath5k_txq_cleanup(struct ath5k_softc *sc)
|
|
|
-{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- unsigned int i;
|
|
|
+ if (ath5k_receive_frame_ok(sc, &rs)) {
|
|
|
+ next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr);
|
|
|
|
|
|
- /* XXX return value */
|
|
|
- if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
|
|
|
- /* don't touch the hardware if marked invalid */
|
|
|
- ath5k_hw_stop_tx_dma(ah, sc->bhalq);
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
|
|
|
- ath5k_hw_get_txdp(ah, sc->bhalq));
|
|
|
- for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
|
|
|
- if (sc->txqs[i].setup) {
|
|
|
- ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
|
|
|
- "link %p\n",
|
|
|
- sc->txqs[i].qnum,
|
|
|
- ath5k_hw_get_txdp(ah,
|
|
|
- sc->txqs[i].qnum),
|
|
|
- sc->txqs[i].link);
|
|
|
- }
|
|
|
- }
|
|
|
+ /*
|
|
|
+ * If we can't replace bf->skb with a new skb under
|
|
|
+ * memory pressure, just skip this packet
|
|
|
+ */
|
|
|
+ if (!next_skb)
|
|
|
+ goto next;
|
|
|
|
|
|
- for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
|
|
|
- if (sc->txqs[i].setup)
|
|
|
- ath5k_txq_drainq(sc, &sc->txqs[i]);
|
|
|
-}
|
|
|
+ pci_unmap_single(sc->pdev, bf->skbaddr,
|
|
|
+ common->rx_bufsize,
|
|
|
+ PCI_DMA_FROMDEVICE);
|
|
|
|
|
|
-static void
|
|
|
-ath5k_txq_release(struct ath5k_softc *sc)
|
|
|
-{
|
|
|
- struct ath5k_txq *txq = sc->txqs;
|
|
|
- unsigned int i;
|
|
|
+ skb_put(skb, rs.rs_datalen);
|
|
|
|
|
|
- for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
|
|
|
- if (txq->setup) {
|
|
|
- ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
|
|
|
- txq->setup = false;
|
|
|
+ ath5k_receive_frame(sc, skb, &rs);
|
|
|
+
|
|
|
+ bf->skb = next_skb;
|
|
|
+ bf->skbaddr = next_skb_addr;
|
|
|
}
|
|
|
+next:
|
|
|
+ list_move_tail(&bf->list, &sc->rxbuf);
|
|
|
+ } while (ath5k_rxbuf_setup(sc, bf) == 0);
|
|
|
+unlock:
|
|
|
+ spin_unlock(&sc->rxbuflock);
|
|
|
}
|
|
|
|
|
|
|
|
|
-
|
|
|
-
|
|
|
/*************\
|
|
|
-* RX Handling *
|
|
|
+* TX Handling *
|
|
|
\*************/
|
|
|
|
|
|
-/*
|
|
|
- * Enable the receive h/w following a reset.
|
|
|
- */
|
|
|
-static int
|
|
|
-ath5k_rx_start(struct ath5k_softc *sc)
|
|
|
+static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
|
|
|
+ struct ath5k_txq *txq)
|
|
|
{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath_common *common = ath5k_hw_common(ah);
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
struct ath5k_buf *bf;
|
|
|
- int ret;
|
|
|
+ unsigned long flags;
|
|
|
+ int padsize;
|
|
|
|
|
|
- common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz);
|
|
|
+ ath5k_debug_dump_skb(sc, skb, "TX ", 1);
|
|
|
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
|
|
|
- common->cachelsz, common->rx_bufsize);
|
|
|
+ /*
|
|
|
+ * The hardware expects the header padded to 4 byte boundaries.
|
|
|
+ * If this is not the case, we add the padding after the header.
|
|
|
+ */
|
|
|
+ padsize = ath5k_add_padding(skb);
|
|
|
+ if (padsize < 0) {
|
|
|
+ ATH5K_ERR(sc, "tx hdrlen not %%4: not enough"
|
|
|
+ " headroom to pad");
|
|
|
+ goto drop_packet;
|
|
|
+ }
|
|
|
|
|
|
- spin_lock_bh(&sc->rxbuflock);
|
|
|
- sc->rxlink = NULL;
|
|
|
- list_for_each_entry(bf, &sc->rxbuf, list) {
|
|
|
- ret = ath5k_rxbuf_setup(sc, bf);
|
|
|
- if (ret != 0) {
|
|
|
- spin_unlock_bh(&sc->rxbuflock);
|
|
|
- goto err;
|
|
|
- }
|
|
|
+ if (txq->txq_len >= ATH5K_TXQ_LEN_MAX)
|
|
|
+ ieee80211_stop_queue(hw, txq->qnum);
|
|
|
+
|
|
|
+ spin_lock_irqsave(&sc->txbuflock, flags);
|
|
|
+ if (list_empty(&sc->txbuf)) {
|
|
|
+ ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
|
|
|
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
|
+ ieee80211_stop_queues(hw);
|
|
|
+ goto drop_packet;
|
|
|
}
|
|
|
- bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
|
|
|
- ath5k_hw_set_rxdp(ah, bf->daddr);
|
|
|
- spin_unlock_bh(&sc->rxbuflock);
|
|
|
+ bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
|
|
|
+ list_del(&bf->list);
|
|
|
+ sc->txbuf_len--;
|
|
|
+ if (list_empty(&sc->txbuf))
|
|
|
+ ieee80211_stop_queues(hw);
|
|
|
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
|
|
|
|
- ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
|
|
|
- ath5k_mode_setup(sc); /* set filters, etc. */
|
|
|
- ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
|
|
|
+ bf->skb = skb;
|
|
|
|
|
|
- return 0;
|
|
|
-err:
|
|
|
- return ret;
|
|
|
+ if (ath5k_txbuf_setup(sc, bf, txq, padsize)) {
|
|
|
+ bf->skb = NULL;
|
|
|
+ spin_lock_irqsave(&sc->txbuflock, flags);
|
|
|
+ list_add_tail(&bf->list, &sc->txbuf);
|
|
|
+ sc->txbuf_len++;
|
|
|
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
|
+ goto drop_packet;
|
|
|
+ }
|
|
|
+ return NETDEV_TX_OK;
|
|
|
+
|
|
|
+drop_packet:
|
|
|
+ dev_kfree_skb_any(skb);
|
|
|
+ return NETDEV_TX_OK;
|
|
|
}
|
|
|
|
|
|
-/*
|
|
|
- * Disable the receive h/w in preparation for a reset.
|
|
|
- */
|
|
|
static void
|
|
|
-ath5k_rx_stop(struct ath5k_softc *sc)
|
|
|
+ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb,
|
|
|
+ struct ath5k_tx_status *ts)
|
|
|
{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
-
|
|
|
- ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
|
|
|
- ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
|
|
|
- ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
|
|
|
+ struct ieee80211_tx_info *info;
|
|
|
+ int i;
|
|
|
|
|
|
- ath5k_debug_printrxbuffs(sc, ah);
|
|
|
-}
|
|
|
+ sc->stats.tx_all_count++;
|
|
|
+ info = IEEE80211_SKB_CB(skb);
|
|
|
|
|
|
-static unsigned int
|
|
|
-ath5k_rx_decrypted(struct ath5k_softc *sc, struct sk_buff *skb,
|
|
|
- struct ath5k_rx_status *rs)
|
|
|
-{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath_common *common = ath5k_hw_common(ah);
|
|
|
- struct ieee80211_hdr *hdr = (void *)skb->data;
|
|
|
- unsigned int keyix, hlen;
|
|
|
+ ieee80211_tx_info_clear_status(info);
|
|
|
+ for (i = 0; i < 4; i++) {
|
|
|
+ struct ieee80211_tx_rate *r =
|
|
|
+ &info->status.rates[i];
|
|
|
|
|
|
- if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
|
|
|
- rs->rs_keyix != AR5K_RXKEYIX_INVALID)
|
|
|
- return RX_FLAG_DECRYPTED;
|
|
|
+ if (ts->ts_rate[i]) {
|
|
|
+ r->idx = ath5k_hw_to_driver_rix(sc, ts->ts_rate[i]);
|
|
|
+ r->count = ts->ts_retry[i];
|
|
|
+ } else {
|
|
|
+ r->idx = -1;
|
|
|
+ r->count = 0;
|
|
|
+ }
|
|
|
+ }
|
|
|
|
|
|
- /* Apparently when a default key is used to decrypt the packet
|
|
|
- the hw does not set the index used to decrypt. In such cases
|
|
|
- get the index from the packet. */
|
|
|
- hlen = ieee80211_hdrlen(hdr->frame_control);
|
|
|
- if (ieee80211_has_protected(hdr->frame_control) &&
|
|
|
- !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
|
|
|
- skb->len >= hlen + 4) {
|
|
|
- keyix = skb->data[hlen + 3] >> 6;
|
|
|
+ /* count the successful attempt as well */
|
|
|
+ info->status.rates[ts->ts_final_idx].count++;
|
|
|
|
|
|
- if (test_bit(keyix, common->keymap))
|
|
|
- return RX_FLAG_DECRYPTED;
|
|
|
+ if (unlikely(ts->ts_status)) {
|
|
|
+ sc->stats.ack_fail++;
|
|
|
+ if (ts->ts_status & AR5K_TXERR_FILT) {
|
|
|
+ info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
|
|
|
+ sc->stats.txerr_filt++;
|
|
|
+ }
|
|
|
+ if (ts->ts_status & AR5K_TXERR_XRETRY)
|
|
|
+ sc->stats.txerr_retry++;
|
|
|
+ if (ts->ts_status & AR5K_TXERR_FIFO)
|
|
|
+ sc->stats.txerr_fifo++;
|
|
|
+ } else {
|
|
|
+ info->flags |= IEEE80211_TX_STAT_ACK;
|
|
|
+ info->status.ack_signal = ts->ts_rssi;
|
|
|
}
|
|
|
|
|
|
- return 0;
|
|
|
-}
|
|
|
+ /*
|
|
|
+ * Remove MAC header padding before giving the frame
|
|
|
+ * back to mac80211.
|
|
|
+ */
|
|
|
+ ath5k_remove_padding(skb);
|
|
|
+
|
|
|
+ if (ts->ts_antenna > 0 && ts->ts_antenna < 5)
|
|
|
+ sc->stats.antenna_tx[ts->ts_antenna]++;
|
|
|
+ else
|
|
|
+ sc->stats.antenna_tx[0]++; /* invalid */
|
|
|
|
|
|
+ ieee80211_tx_status(sc->hw, skb);
|
|
|
+}
|
|
|
|
|
|
static void
|
|
|
-ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
|
|
|
- struct ieee80211_rx_status *rxs)
|
|
|
+ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
|
|
|
{
|
|
|
- struct ath_common *common = ath5k_hw_common(sc->ah);
|
|
|
- u64 tsf, bc_tstamp;
|
|
|
- u32 hw_tu;
|
|
|
- struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
|
|
|
+ struct ath5k_tx_status ts = {};
|
|
|
+ struct ath5k_buf *bf, *bf0;
|
|
|
+ struct ath5k_desc *ds;
|
|
|
+ struct sk_buff *skb;
|
|
|
+ int ret;
|
|
|
|
|
|
- if (ieee80211_is_beacon(mgmt->frame_control) &&
|
|
|
- le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
|
|
|
- memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) {
|
|
|
- /*
|
|
|
- * Received an IBSS beacon with the same BSSID. Hardware *must*
|
|
|
- * have updated the local TSF. We have to work around various
|
|
|
- * hardware bugs, though...
|
|
|
- */
|
|
|
- tsf = ath5k_hw_get_tsf64(sc->ah);
|
|
|
- bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
|
|
|
- hw_tu = TSF_TO_TU(tsf);
|
|
|
+ spin_lock(&txq->lock);
|
|
|
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
|
|
|
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
|
|
|
- (unsigned long long)bc_tstamp,
|
|
|
- (unsigned long long)rxs->mactime,
|
|
|
- (unsigned long long)(rxs->mactime - bc_tstamp),
|
|
|
- (unsigned long long)tsf);
|
|
|
+ txq->txq_poll_mark = false;
|
|
|
|
|
|
- /*
|
|
|
- * Sometimes the HW will give us a wrong tstamp in the rx
|
|
|
- * status, causing the timestamp extension to go wrong.
|
|
|
- * (This seems to happen especially with beacon frames bigger
|
|
|
- * than 78 byte (incl. FCS))
|
|
|
- * But we know that the receive timestamp must be later than the
|
|
|
- * timestamp of the beacon since HW must have synced to that.
|
|
|
- *
|
|
|
- * NOTE: here we assume mactime to be after the frame was
|
|
|
- * received, not like mac80211 which defines it at the start.
|
|
|
- */
|
|
|
- if (bc_tstamp > rxs->mactime) {
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "fixing mactime from %llx to %llx\n",
|
|
|
- (unsigned long long)rxs->mactime,
|
|
|
- (unsigned long long)tsf);
|
|
|
- rxs->mactime = tsf;
|
|
|
+ /* skb might already have been processed last time. */
|
|
|
+ if (bf->skb != NULL) {
|
|
|
+ ds = bf->desc;
|
|
|
+
|
|
|
+ ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
|
|
|
+ if (unlikely(ret == -EINPROGRESS))
|
|
|
+ break;
|
|
|
+ else if (unlikely(ret)) {
|
|
|
+ ATH5K_ERR(sc,
|
|
|
+ "error %d while processing "
|
|
|
+ "queue %u\n", ret, txq->qnum);
|
|
|
+ break;
|
|
|
+ }
|
|
|
+
|
|
|
+ skb = bf->skb;
|
|
|
+ bf->skb = NULL;
|
|
|
+ pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
|
|
|
+ PCI_DMA_TODEVICE);
|
|
|
+ ath5k_tx_frame_completed(sc, skb, &ts);
|
|
|
}
|
|
|
|
|
|
/*
|
|
|
- * Local TSF might have moved higher than our beacon timers,
|
|
|
- * in that case we have to update them to continue sending
|
|
|
- * beacons. This also takes care of synchronizing beacon sending
|
|
|
- * times with other stations.
|
|
|
+ * It's possible that the hardware can say the buffer is
|
|
|
+ * completed when it hasn't yet loaded the ds_link from
|
|
|
+ * host memory and moved on.
|
|
|
+ * Always keep the last descriptor to avoid HW races...
|
|
|
*/
|
|
|
- if (hw_tu >= sc->nexttbtt)
|
|
|
- ath5k_beacon_update_timers(sc, bc_tstamp);
|
|
|
+ if (ath5k_hw_get_txdp(sc->ah, txq->qnum) != bf->daddr) {
|
|
|
+ spin_lock(&sc->txbuflock);
|
|
|
+ list_move_tail(&bf->list, &sc->txbuf);
|
|
|
+ sc->txbuf_len++;
|
|
|
+ txq->txq_len--;
|
|
|
+ spin_unlock(&sc->txbuflock);
|
|
|
+ }
|
|
|
}
|
|
|
+ spin_unlock(&txq->lock);
|
|
|
+ if (txq->txq_len < ATH5K_TXQ_LEN_LOW)
|
|
|
+ ieee80211_wake_queue(sc->hw, txq->qnum);
|
|
|
}
|
|
|
|
|
|
static void
|
|
|
-ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi)
|
|
|
+ath5k_tasklet_tx(unsigned long data)
|
|
|
{
|
|
|
- struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
|
|
|
+ int i;
|
|
|
+ struct ath5k_softc *sc = (void *)data;
|
|
|
+
|
|
|
+ for (i=0; i < AR5K_NUM_TX_QUEUES; i++)
|
|
|
+ if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i)))
|
|
|
+ ath5k_tx_processq(sc, &sc->txqs[i]);
|
|
|
+}
|
|
|
+
|
|
|
+
|
|
|
+/*****************\
|
|
|
+* Beacon handling *
|
|
|
+\*****************/
|
|
|
+
|
|
|
+/*
|
|
|
+ * Setup the beacon frame for transmit.
|
|
|
+ */
|
|
|
+static int
|
|
|
+ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
|
|
|
+{
|
|
|
+ struct sk_buff *skb = bf->skb;
|
|
|
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath_common *common = ath5k_hw_common(ah);
|
|
|
+ struct ath5k_desc *ds;
|
|
|
+ int ret = 0;
|
|
|
+ u8 antenna;
|
|
|
+ u32 flags;
|
|
|
+ const int padsize = 0;
|
|
|
|
|
|
- /* only beacons from our BSSID */
|
|
|
- if (!ieee80211_is_beacon(mgmt->frame_control) ||
|
|
|
- memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0)
|
|
|
- return;
|
|
|
+ bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
|
|
|
+ PCI_DMA_TODEVICE);
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
|
|
|
+ "skbaddr %llx\n", skb, skb->data, skb->len,
|
|
|
+ (unsigned long long)bf->skbaddr);
|
|
|
+ if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
|
|
|
+ ATH5K_ERR(sc, "beacon DMA mapping failed\n");
|
|
|
+ return -EIO;
|
|
|
+ }
|
|
|
|
|
|
- ah->ah_beacon_rssi_avg = ath5k_moving_average(ah->ah_beacon_rssi_avg,
|
|
|
- rssi);
|
|
|
+ ds = bf->desc;
|
|
|
+ antenna = ah->ah_tx_ant;
|
|
|
|
|
|
- /* in IBSS mode we should keep RSSI statistics per neighbour */
|
|
|
- /* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */
|
|
|
+ flags = AR5K_TXDESC_NOACK;
|
|
|
+ if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
|
|
|
+ ds->ds_link = bf->daddr; /* self-linked */
|
|
|
+ flags |= AR5K_TXDESC_VEOL;
|
|
|
+ } else
|
|
|
+ ds->ds_link = 0;
|
|
|
+
|
|
|
+ /*
|
|
|
+ * If we use multiple antennas on AP and use
|
|
|
+ * the Sectored AP scenario, switch antenna every
|
|
|
+ * 4 beacons to make sure everybody hears our AP.
|
|
|
+ * When a client tries to associate, hw will keep
|
|
|
+ * track of the tx antenna to be used for this client
|
|
|
+ * automaticaly, based on ACKed packets.
|
|
|
+ *
|
|
|
+ * Note: AP still listens and transmits RTS on the
|
|
|
+ * default antenna which is supposed to be an omni.
|
|
|
+ *
|
|
|
+ * Note2: On sectored scenarios it's possible to have
|
|
|
+ * multiple antennas (1 omni -- the default -- and 14
|
|
|
+ * sectors), so if we choose to actually support this
|
|
|
+ * mode, we need to allow the user to set how many antennas
|
|
|
+ * we have and tweak the code below to send beacons
|
|
|
+ * on all of them.
|
|
|
+ */
|
|
|
+ if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
|
|
|
+ antenna = sc->bsent & 4 ? 2 : 1;
|
|
|
+
|
|
|
+
|
|
|
+ /* FIXME: If we are in g mode and rate is a CCK rate
|
|
|
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
|
|
|
+ * from tx power (value is in dB units already) */
|
|
|
+ ds->ds_data = bf->skbaddr;
|
|
|
+ ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
|
|
|
+ ieee80211_get_hdrlen_from_skb(skb), padsize,
|
|
|
+ AR5K_PKT_TYPE_BEACON, (sc->power_level * 2),
|
|
|
+ ieee80211_get_tx_rate(sc->hw, info)->hw_value,
|
|
|
+ 1, AR5K_TXKEYIX_INVALID,
|
|
|
+ antenna, flags, 0, 0);
|
|
|
+ if (ret)
|
|
|
+ goto err_unmap;
|
|
|
+
|
|
|
+ return 0;
|
|
|
+err_unmap:
|
|
|
+ pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
/*
|
|
|
- * Compute padding position. skb must contain an IEEE 802.11 frame
|
|
|
+ * Updates the beacon that is sent by ath5k_beacon_send. For adhoc,
|
|
|
+ * this is called only once at config_bss time, for AP we do it every
|
|
|
+ * SWBA interrupt so that the TIM will reflect buffered frames.
|
|
|
+ *
|
|
|
+ * Called with the beacon lock.
|
|
|
*/
|
|
|
-static int ath5k_common_padpos(struct sk_buff *skb)
|
|
|
+static int
|
|
|
+ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
|
|
|
{
|
|
|
- struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
|
|
|
- __le16 frame_control = hdr->frame_control;
|
|
|
- int padpos = 24;
|
|
|
+ int ret;
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+ struct sk_buff *skb;
|
|
|
|
|
|
- if (ieee80211_has_a4(frame_control)) {
|
|
|
- padpos += ETH_ALEN;
|
|
|
+ if (WARN_ON(!vif)) {
|
|
|
+ ret = -EINVAL;
|
|
|
+ goto out;
|
|
|
}
|
|
|
- if (ieee80211_is_data_qos(frame_control)) {
|
|
|
- padpos += IEEE80211_QOS_CTL_LEN;
|
|
|
+
|
|
|
+ skb = ieee80211_beacon_get(hw, vif);
|
|
|
+
|
|
|
+ if (!skb) {
|
|
|
+ ret = -ENOMEM;
|
|
|
+ goto out;
|
|
|
}
|
|
|
|
|
|
- return padpos;
|
|
|
+ ath5k_debug_dump_skb(sc, skb, "BC ", 1);
|
|
|
+
|
|
|
+ ath5k_txbuf_free_skb(sc, sc->bbuf);
|
|
|
+ sc->bbuf->skb = skb;
|
|
|
+ ret = ath5k_beacon_setup(sc, sc->bbuf);
|
|
|
+ if (ret)
|
|
|
+ sc->bbuf->skb = NULL;
|
|
|
+out:
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
/*
|
|
|
- * This function expects an 802.11 frame and returns the number of
|
|
|
- * bytes added, or -1 if we don't have enough header room.
|
|
|
+ * Transmit a beacon frame at SWBA. Dynamic updates to the
|
|
|
+ * frame contents are done as needed and the slot time is
|
|
|
+ * also adjusted based on current state.
|
|
|
+ *
|
|
|
+ * This is called from software irq context (beacontq tasklets)
|
|
|
+ * or user context from ath5k_beacon_config.
|
|
|
*/
|
|
|
-static int ath5k_add_padding(struct sk_buff *skb)
|
|
|
+static void
|
|
|
+ath5k_beacon_send(struct ath5k_softc *sc)
|
|
|
{
|
|
|
- int padpos = ath5k_common_padpos(skb);
|
|
|
- int padsize = padpos & 3;
|
|
|
+ struct ath5k_buf *bf = sc->bbuf;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct sk_buff *skb;
|
|
|
+
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
|
|
|
+
|
|
|
+ if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION)) {
|
|
|
+ ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
|
|
|
+ return;
|
|
|
+ }
|
|
|
+ /*
|
|
|
+ * Check if the previous beacon has gone out. If
|
|
|
+ * not, don't don't try to post another: skip this
|
|
|
+ * period and wait for the next. Missed beacons
|
|
|
+ * indicate a problem and should not occur. If we
|
|
|
+ * miss too many consecutive beacons reset the device.
|
|
|
+ */
|
|
|
+ if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
|
|
|
+ sc->bmisscount++;
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "missed %u consecutive beacons\n", sc->bmisscount);
|
|
|
+ if (sc->bmisscount > 10) { /* NB: 10 is a guess */
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "stuck beacon time (%u missed)\n",
|
|
|
+ sc->bmisscount);
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
+ "stuck beacon, resetting\n");
|
|
|
+ ieee80211_queue_work(sc->hw, &sc->reset_work);
|
|
|
+ }
|
|
|
+ return;
|
|
|
+ }
|
|
|
+ if (unlikely(sc->bmisscount != 0)) {
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "resume beacon xmit after %u misses\n",
|
|
|
+ sc->bmisscount);
|
|
|
+ sc->bmisscount = 0;
|
|
|
+ }
|
|
|
+
|
|
|
+ /*
|
|
|
+ * Stop any current dma and put the new frame on the queue.
|
|
|
+ * This should never fail since we check above that no frames
|
|
|
+ * are still pending on the queue.
|
|
|
+ */
|
|
|
+ if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
|
|
|
+ ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
|
|
|
+ /* NB: hw still stops DMA, so proceed */
|
|
|
+ }
|
|
|
|
|
|
- if (padsize && skb->len>padpos) {
|
|
|
+ /* refresh the beacon for AP mode */
|
|
|
+ if (sc->opmode == NL80211_IFTYPE_AP)
|
|
|
+ ath5k_beacon_update(sc->hw, sc->vif);
|
|
|
|
|
|
- if (skb_headroom(skb) < padsize)
|
|
|
- return -1;
|
|
|
+ ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
|
|
|
+ ath5k_hw_start_tx_dma(ah, sc->bhalq);
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
|
|
|
+ sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
|
|
|
|
|
|
- skb_push(skb, padsize);
|
|
|
- memmove(skb->data, skb->data+padsize, padpos);
|
|
|
- return padsize;
|
|
|
+ skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
|
|
|
+ while (skb) {
|
|
|
+ ath5k_tx_queue(sc->hw, skb, sc->cabq);
|
|
|
+ skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
|
|
|
}
|
|
|
|
|
|
- return 0;
|
|
|
+ sc->bsent++;
|
|
|
}
|
|
|
|
|
|
-/*
|
|
|
- * The MAC header is padded to have 32-bit boundary if the
|
|
|
- * packet payload is non-zero. The general calculation for
|
|
|
- * padsize would take into account odd header lengths:
|
|
|
- * padsize = 4 - (hdrlen & 3); however, since only
|
|
|
- * even-length headers are used, padding can only be 0 or 2
|
|
|
- * bytes and we can optimize this a bit. We must not try to
|
|
|
- * remove padding from short control frames that do not have a
|
|
|
- * payload.
|
|
|
+/**
|
|
|
+ * ath5k_beacon_update_timers - update beacon timers
|
|
|
*
|
|
|
- * This function expects an 802.11 frame and returns the number of
|
|
|
- * bytes removed.
|
|
|
+ * @sc: struct ath5k_softc pointer we are operating on
|
|
|
+ * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
|
|
|
+ * beacon timer update based on the current HW TSF.
|
|
|
+ *
|
|
|
+ * Calculate the next target beacon transmit time (TBTT) based on the timestamp
|
|
|
+ * of a received beacon or the current local hardware TSF and write it to the
|
|
|
+ * beacon timer registers.
|
|
|
+ *
|
|
|
+ * This is called in a variety of situations, e.g. when a beacon is received,
|
|
|
+ * when a TSF update has been detected, but also when an new IBSS is created or
|
|
|
+ * when we otherwise know we have to update the timers, but we keep it in this
|
|
|
+ * function to have it all together in one place.
|
|
|
*/
|
|
|
-static int ath5k_remove_padding(struct sk_buff *skb)
|
|
|
+static void
|
|
|
+ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
|
|
|
{
|
|
|
- int padpos = ath5k_common_padpos(skb);
|
|
|
- int padsize = padpos & 3;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ u32 nexttbtt, intval, hw_tu, bc_tu;
|
|
|
+ u64 hw_tsf;
|
|
|
|
|
|
- if (padsize && skb->len>=padpos+padsize) {
|
|
|
- memmove(skb->data + padsize, skb->data, padpos);
|
|
|
- skb_pull(skb, padsize);
|
|
|
- return padsize;
|
|
|
- }
|
|
|
+ intval = sc->bintval & AR5K_BEACON_PERIOD;
|
|
|
+ if (WARN_ON(!intval))
|
|
|
+ return;
|
|
|
|
|
|
- return 0;
|
|
|
-}
|
|
|
+ /* beacon TSF converted to TU */
|
|
|
+ bc_tu = TSF_TO_TU(bc_tsf);
|
|
|
|
|
|
-static void
|
|
|
-ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb,
|
|
|
- struct ath5k_rx_status *rs)
|
|
|
-{
|
|
|
- struct ieee80211_rx_status *rxs;
|
|
|
+ /* current TSF converted to TU */
|
|
|
+ hw_tsf = ath5k_hw_get_tsf64(ah);
|
|
|
+ hw_tu = TSF_TO_TU(hw_tsf);
|
|
|
|
|
|
- ath5k_remove_padding(skb);
|
|
|
+#define FUDGE 3
|
|
|
+ /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
|
|
|
+ if (bc_tsf == -1) {
|
|
|
+ /*
|
|
|
+ * no beacons received, called internally.
|
|
|
+ * just need to refresh timers based on HW TSF.
|
|
|
+ */
|
|
|
+ nexttbtt = roundup(hw_tu + FUDGE, intval);
|
|
|
+ } else if (bc_tsf == 0) {
|
|
|
+ /*
|
|
|
+ * no beacon received, probably called by ath5k_reset_tsf().
|
|
|
+ * reset TSF to start with 0.
|
|
|
+ */
|
|
|
+ nexttbtt = intval;
|
|
|
+ intval |= AR5K_BEACON_RESET_TSF;
|
|
|
+ } else if (bc_tsf > hw_tsf) {
|
|
|
+ /*
|
|
|
+ * beacon received, SW merge happend but HW TSF not yet updated.
|
|
|
+ * not possible to reconfigure timers yet, but next time we
|
|
|
+ * receive a beacon with the same BSSID, the hardware will
|
|
|
+ * automatically update the TSF and then we need to reconfigure
|
|
|
+ * the timers.
|
|
|
+ */
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "need to wait for HW TSF sync\n");
|
|
|
+ return;
|
|
|
+ } else {
|
|
|
+ /*
|
|
|
+ * most important case for beacon synchronization between STA.
|
|
|
+ *
|
|
|
+ * beacon received and HW TSF has been already updated by HW.
|
|
|
+ * update next TBTT based on the TSF of the beacon, but make
|
|
|
+ * sure it is ahead of our local TSF timer.
|
|
|
+ */
|
|
|
+ nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
|
|
|
+ }
|
|
|
+#undef FUDGE
|
|
|
|
|
|
- rxs = IEEE80211_SKB_RXCB(skb);
|
|
|
+ sc->nexttbtt = nexttbtt;
|
|
|
|
|
|
- rxs->flag = 0;
|
|
|
- if (unlikely(rs->rs_status & AR5K_RXERR_MIC))
|
|
|
- rxs->flag |= RX_FLAG_MMIC_ERROR;
|
|
|
+ intval |= AR5K_BEACON_ENA;
|
|
|
+ ath5k_hw_init_beacon(ah, nexttbtt, intval);
|
|
|
|
|
|
/*
|
|
|
- * always extend the mac timestamp, since this information is
|
|
|
- * also needed for proper IBSS merging.
|
|
|
- *
|
|
|
- * XXX: it might be too late to do it here, since rs_tstamp is
|
|
|
- * 15bit only. that means TSF extension has to be done within
|
|
|
- * 32768usec (about 32ms). it might be necessary to move this to
|
|
|
- * the interrupt handler, like it is done in madwifi.
|
|
|
- *
|
|
|
- * Unfortunately we don't know when the hardware takes the rx
|
|
|
- * timestamp (beginning of phy frame, data frame, end of rx?).
|
|
|
- * The only thing we know is that it is hardware specific...
|
|
|
- * On AR5213 it seems the rx timestamp is at the end of the
|
|
|
- * frame, but i'm not sure.
|
|
|
- *
|
|
|
- * NOTE: mac80211 defines mactime at the beginning of the first
|
|
|
- * data symbol. Since we don't have any time references it's
|
|
|
- * impossible to comply to that. This affects IBSS merge only
|
|
|
- * right now, so it's not too bad...
|
|
|
+ * debugging output last in order to preserve the time critical aspect
|
|
|
+ * of this function
|
|
|
*/
|
|
|
- rxs->mactime = ath5k_extend_tsf(sc->ah, rs->rs_tstamp);
|
|
|
- rxs->flag |= RX_FLAG_TSFT;
|
|
|
-
|
|
|
- rxs->freq = sc->curchan->center_freq;
|
|
|
- rxs->band = sc->curband->band;
|
|
|
-
|
|
|
- rxs->signal = sc->ah->ah_noise_floor + rs->rs_rssi;
|
|
|
-
|
|
|
- rxs->antenna = rs->rs_antenna;
|
|
|
-
|
|
|
- if (rs->rs_antenna > 0 && rs->rs_antenna < 5)
|
|
|
- sc->stats.antenna_rx[rs->rs_antenna]++;
|
|
|
+ if (bc_tsf == -1)
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "reconfigured timers based on HW TSF\n");
|
|
|
+ else if (bc_tsf == 0)
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "reset HW TSF and timers\n");
|
|
|
else
|
|
|
- sc->stats.antenna_rx[0]++; /* invalid */
|
|
|
-
|
|
|
- rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs->rs_rate);
|
|
|
- rxs->flag |= ath5k_rx_decrypted(sc, skb, rs);
|
|
|
-
|
|
|
- if (rxs->rate_idx >= 0 && rs->rs_rate ==
|
|
|
- sc->curband->bitrates[rxs->rate_idx].hw_value_short)
|
|
|
- rxs->flag |= RX_FLAG_SHORTPRE;
|
|
|
-
|
|
|
- ath5k_debug_dump_skb(sc, skb, "RX ", 0);
|
|
|
-
|
|
|
- ath5k_update_beacon_rssi(sc, skb, rs->rs_rssi);
|
|
|
-
|
|
|
- /* check beacons in IBSS mode */
|
|
|
- if (sc->opmode == NL80211_IFTYPE_ADHOC)
|
|
|
- ath5k_check_ibss_tsf(sc, skb, rxs);
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "updated timers based on beacon TSF\n");
|
|
|
|
|
|
- ieee80211_rx(sc->hw, skb);
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
|
|
|
+ (unsigned long long) bc_tsf,
|
|
|
+ (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
|
|
|
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
|
|
|
+ intval & AR5K_BEACON_PERIOD,
|
|
|
+ intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
|
|
|
+ intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
|
|
|
}
|
|
|
|
|
|
-/** ath5k_frame_receive_ok() - Do we want to receive this frame or not?
|
|
|
+/**
|
|
|
+ * ath5k_beacon_config - Configure the beacon queues and interrupts
|
|
|
*
|
|
|
- * Check if we want to further process this frame or not. Also update
|
|
|
- * statistics. Return true if we want this frame, false if not.
|
|
|
+ * @sc: struct ath5k_softc pointer we are operating on
|
|
|
+ *
|
|
|
+ * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
|
|
|
+ * interrupts to detect TSF updates only.
|
|
|
*/
|
|
|
-static bool
|
|
|
-ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs)
|
|
|
+static void
|
|
|
+ath5k_beacon_config(struct ath5k_softc *sc)
|
|
|
{
|
|
|
- sc->stats.rx_all_count++;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ unsigned long flags;
|
|
|
|
|
|
- if (unlikely(rs->rs_status)) {
|
|
|
- if (rs->rs_status & AR5K_RXERR_CRC)
|
|
|
- sc->stats.rxerr_crc++;
|
|
|
- if (rs->rs_status & AR5K_RXERR_FIFO)
|
|
|
- sc->stats.rxerr_fifo++;
|
|
|
- if (rs->rs_status & AR5K_RXERR_PHY) {
|
|
|
- sc->stats.rxerr_phy++;
|
|
|
- if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32)
|
|
|
- sc->stats.rxerr_phy_code[rs->rs_phyerr]++;
|
|
|
- return false;
|
|
|
- }
|
|
|
- if (rs->rs_status & AR5K_RXERR_DECRYPT) {
|
|
|
- /*
|
|
|
- * Decrypt error. If the error occurred
|
|
|
- * because there was no hardware key, then
|
|
|
- * let the frame through so the upper layers
|
|
|
- * can process it. This is necessary for 5210
|
|
|
- * parts which have no way to setup a ``clear''
|
|
|
- * key cache entry.
|
|
|
- *
|
|
|
- * XXX do key cache faulting
|
|
|
- */
|
|
|
- sc->stats.rxerr_decrypt++;
|
|
|
- if (rs->rs_keyix == AR5K_RXKEYIX_INVALID &&
|
|
|
- !(rs->rs_status & AR5K_RXERR_CRC))
|
|
|
- return true;
|
|
|
- }
|
|
|
- if (rs->rs_status & AR5K_RXERR_MIC) {
|
|
|
- sc->stats.rxerr_mic++;
|
|
|
- return true;
|
|
|
- }
|
|
|
+ spin_lock_irqsave(&sc->block, flags);
|
|
|
+ sc->bmisscount = 0;
|
|
|
+ sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
|
|
|
|
|
|
- /* reject any frames with non-crypto errors */
|
|
|
- if (rs->rs_status & ~(AR5K_RXERR_DECRYPT))
|
|
|
- return false;
|
|
|
+ if (sc->enable_beacon) {
|
|
|
+ /*
|
|
|
+ * In IBSS mode we use a self-linked tx descriptor and let the
|
|
|
+ * hardware send the beacons automatically. We have to load it
|
|
|
+ * only once here.
|
|
|
+ * We use the SWBA interrupt only to keep track of the beacon
|
|
|
+ * timers in order to detect automatic TSF updates.
|
|
|
+ */
|
|
|
+ ath5k_beaconq_config(sc);
|
|
|
+
|
|
|
+ sc->imask |= AR5K_INT_SWBA;
|
|
|
+
|
|
|
+ if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
|
+ if (ath5k_hw_hasveol(ah))
|
|
|
+ ath5k_beacon_send(sc);
|
|
|
+ } else
|
|
|
+ ath5k_beacon_update_timers(sc, -1);
|
|
|
+ } else {
|
|
|
+ ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
|
|
|
}
|
|
|
|
|
|
- if (unlikely(rs->rs_more)) {
|
|
|
- sc->stats.rxerr_jumbo++;
|
|
|
- return false;
|
|
|
+ ath5k_hw_set_imr(ah, sc->imask);
|
|
|
+ mmiowb();
|
|
|
+ spin_unlock_irqrestore(&sc->block, flags);
|
|
|
+}
|
|
|
+
|
|
|
+static void ath5k_tasklet_beacon(unsigned long data)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = (struct ath5k_softc *) data;
|
|
|
+
|
|
|
+ /*
|
|
|
+ * Software beacon alert--time to send a beacon.
|
|
|
+ *
|
|
|
+ * In IBSS mode we use this interrupt just to
|
|
|
+ * keep track of the next TBTT (target beacon
|
|
|
+ * transmission time) in order to detect wether
|
|
|
+ * automatic TSF updates happened.
|
|
|
+ */
|
|
|
+ if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
|
+ /* XXX: only if VEOL suppported */
|
|
|
+ u64 tsf = ath5k_hw_get_tsf64(sc->ah);
|
|
|
+ sc->nexttbtt += sc->bintval;
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
+ "SWBA nexttbtt: %x hw_tu: %x "
|
|
|
+ "TSF: %llx\n",
|
|
|
+ sc->nexttbtt,
|
|
|
+ TSF_TO_TU(tsf),
|
|
|
+ (unsigned long long) tsf);
|
|
|
+ } else {
|
|
|
+ spin_lock(&sc->block);
|
|
|
+ ath5k_beacon_send(sc);
|
|
|
+ spin_unlock(&sc->block);
|
|
|
}
|
|
|
- return true;
|
|
|
}
|
|
|
|
|
|
+
|
|
|
+/********************\
|
|
|
+* Interrupt handling *
|
|
|
+\********************/
|
|
|
+
|
|
|
static void
|
|
|
-ath5k_tasklet_rx(unsigned long data)
|
|
|
+ath5k_intr_calibration_poll(struct ath5k_hw *ah)
|
|
|
{
|
|
|
- struct ath5k_rx_status rs = {};
|
|
|
- struct sk_buff *skb, *next_skb;
|
|
|
- dma_addr_t next_skb_addr;
|
|
|
- struct ath5k_softc *sc = (void *)data;
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath_common *common = ath5k_hw_common(ah);
|
|
|
- struct ath5k_buf *bf;
|
|
|
- struct ath5k_desc *ds;
|
|
|
- int ret;
|
|
|
+ if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) &&
|
|
|
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) {
|
|
|
+ /* run ANI only when full calibration is not active */
|
|
|
+ ah->ah_cal_next_ani = jiffies +
|
|
|
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
|
|
|
+ tasklet_schedule(&ah->ah_sc->ani_tasklet);
|
|
|
|
|
|
- spin_lock(&sc->rxbuflock);
|
|
|
- if (list_empty(&sc->rxbuf)) {
|
|
|
- ATH5K_WARN(sc, "empty rx buf pool\n");
|
|
|
- goto unlock;
|
|
|
+ } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
|
|
|
+ ah->ah_cal_next_full = jiffies +
|
|
|
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
|
|
|
+ tasklet_schedule(&ah->ah_sc->calib);
|
|
|
}
|
|
|
- do {
|
|
|
- bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
|
|
|
- BUG_ON(bf->skb == NULL);
|
|
|
- skb = bf->skb;
|
|
|
- ds = bf->desc;
|
|
|
-
|
|
|
- /* bail if HW is still using self-linked descriptor */
|
|
|
- if (ath5k_hw_get_rxdp(sc->ah) == bf->daddr)
|
|
|
- break;
|
|
|
+ /* we could use SWI to generate enough interrupts to meet our
|
|
|
+ * calibration interval requirements, if necessary:
|
|
|
+ * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
|
|
|
+}
|
|
|
|
|
|
- ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
|
|
|
- if (unlikely(ret == -EINPROGRESS))
|
|
|
- break;
|
|
|
- else if (unlikely(ret)) {
|
|
|
- ATH5K_ERR(sc, "error in processing rx descriptor\n");
|
|
|
- sc->stats.rxerr_proc++;
|
|
|
- break;
|
|
|
- }
|
|
|
+static irqreturn_t
|
|
|
+ath5k_intr(int irq, void *dev_id)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = dev_id;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ enum ath5k_int status;
|
|
|
+ unsigned int counter = 1000;
|
|
|
|
|
|
- if (ath5k_receive_frame_ok(sc, &rs)) {
|
|
|
- next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr);
|
|
|
+ if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
|
|
|
+ !ath5k_hw_is_intr_pending(ah)))
|
|
|
+ return IRQ_NONE;
|
|
|
|
|
|
+ do {
|
|
|
+ ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
|
|
|
+ status, sc->imask);
|
|
|
+ if (unlikely(status & AR5K_INT_FATAL)) {
|
|
|
/*
|
|
|
- * If we can't replace bf->skb with a new skb under
|
|
|
- * memory pressure, just skip this packet
|
|
|
+ * Fatal errors are unrecoverable.
|
|
|
+ * Typically these are caused by DMA errors.
|
|
|
*/
|
|
|
- if (!next_skb)
|
|
|
- goto next;
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
+ "fatal int, resetting\n");
|
|
|
+ ieee80211_queue_work(sc->hw, &sc->reset_work);
|
|
|
+ } else if (unlikely(status & AR5K_INT_RXORN)) {
|
|
|
+ /*
|
|
|
+ * Receive buffers are full. Either the bus is busy or
|
|
|
+ * the CPU is not fast enough to process all received
|
|
|
+ * frames.
|
|
|
+ * Older chipsets need a reset to come out of this
|
|
|
+ * condition, but we treat it as RX for newer chips.
|
|
|
+ * We don't know exactly which versions need a reset -
|
|
|
+ * this guess is copied from the HAL.
|
|
|
+ */
|
|
|
+ sc->stats.rxorn_intr++;
|
|
|
+ if (ah->ah_mac_srev < AR5K_SREV_AR5212) {
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
+ "rx overrun, resetting\n");
|
|
|
+ ieee80211_queue_work(sc->hw, &sc->reset_work);
|
|
|
+ }
|
|
|
+ else
|
|
|
+ tasklet_schedule(&sc->rxtq);
|
|
|
+ } else {
|
|
|
+ if (status & AR5K_INT_SWBA) {
|
|
|
+ tasklet_hi_schedule(&sc->beacontq);
|
|
|
+ }
|
|
|
+ if (status & AR5K_INT_RXEOL) {
|
|
|
+ /*
|
|
|
+ * NB: the hardware should re-read the link when
|
|
|
+ * RXE bit is written, but it doesn't work at
|
|
|
+ * least on older hardware revs.
|
|
|
+ */
|
|
|
+ sc->stats.rxeol_intr++;
|
|
|
+ }
|
|
|
+ if (status & AR5K_INT_TXURN) {
|
|
|
+ /* bump tx trigger level */
|
|
|
+ ath5k_hw_update_tx_triglevel(ah, true);
|
|
|
+ }
|
|
|
+ if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
|
|
|
+ tasklet_schedule(&sc->rxtq);
|
|
|
+ if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
|
|
|
+ | AR5K_INT_TXERR | AR5K_INT_TXEOL))
|
|
|
+ tasklet_schedule(&sc->txtq);
|
|
|
+ if (status & AR5K_INT_BMISS) {
|
|
|
+ /* TODO */
|
|
|
+ }
|
|
|
+ if (status & AR5K_INT_MIB) {
|
|
|
+ sc->stats.mib_intr++;
|
|
|
+ ath5k_hw_update_mib_counters(ah);
|
|
|
+ ath5k_ani_mib_intr(ah);
|
|
|
+ }
|
|
|
+ if (status & AR5K_INT_GPIO)
|
|
|
+ tasklet_schedule(&sc->rf_kill.toggleq);
|
|
|
|
|
|
- pci_unmap_single(sc->pdev, bf->skbaddr,
|
|
|
- common->rx_bufsize,
|
|
|
- PCI_DMA_FROMDEVICE);
|
|
|
+ }
|
|
|
+ } while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
|
|
|
|
|
|
- skb_put(skb, rs.rs_datalen);
|
|
|
+ if (unlikely(!counter))
|
|
|
+ ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
|
|
|
|
|
|
- ath5k_receive_frame(sc, skb, &rs);
|
|
|
+ ath5k_intr_calibration_poll(ah);
|
|
|
|
|
|
- bf->skb = next_skb;
|
|
|
- bf->skbaddr = next_skb_addr;
|
|
|
- }
|
|
|
-next:
|
|
|
- list_move_tail(&bf->list, &sc->rxbuf);
|
|
|
- } while (ath5k_rxbuf_setup(sc, bf) == 0);
|
|
|
-unlock:
|
|
|
- spin_unlock(&sc->rxbuflock);
|
|
|
+ return IRQ_HANDLED;
|
|
|
}
|
|
|
|
|
|
-
|
|
|
-/*************\
|
|
|
-* TX Handling *
|
|
|
-\*************/
|
|
|
-
|
|
|
+/*
|
|
|
+ * Periodically recalibrate the PHY to account
|
|
|
+ * for temperature/environment changes.
|
|
|
+ */
|
|
|
static void
|
|
|
-ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
|
|
|
+ath5k_tasklet_calibrate(unsigned long data)
|
|
|
{
|
|
|
- struct ath5k_tx_status ts = {};
|
|
|
- struct ath5k_buf *bf, *bf0;
|
|
|
- struct ath5k_desc *ds;
|
|
|
- struct sk_buff *skb;
|
|
|
- struct ieee80211_tx_info *info;
|
|
|
- int i, ret;
|
|
|
+ struct ath5k_softc *sc = (void *)data;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
|
|
|
- spin_lock(&txq->lock);
|
|
|
- list_for_each_entry_safe(bf, bf0, &txq->q, list) {
|
|
|
- ds = bf->desc;
|
|
|
+ /* Only full calibration for now */
|
|
|
+ ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
|
|
|
+
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
|
|
|
+ ieee80211_frequency_to_channel(sc->curchan->center_freq),
|
|
|
+ sc->curchan->hw_value);
|
|
|
|
|
|
+ if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
|
|
|
/*
|
|
|
- * It's possible that the hardware can say the buffer is
|
|
|
- * completed when it hasn't yet loaded the ds_link from
|
|
|
- * host memory and moved on. If there are more TX
|
|
|
- * descriptors in the queue, wait for TXDP to change
|
|
|
- * before processing this one.
|
|
|
+ * Rfgain is out of bounds, reset the chip
|
|
|
+ * to load new gain values.
|
|
|
*/
|
|
|
- if (ath5k_hw_get_txdp(sc->ah, txq->qnum) == bf->daddr &&
|
|
|
- !list_is_last(&bf->list, &txq->q))
|
|
|
- break;
|
|
|
-
|
|
|
- ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
|
|
|
- if (unlikely(ret == -EINPROGRESS))
|
|
|
- break;
|
|
|
- else if (unlikely(ret)) {
|
|
|
- ATH5K_ERR(sc, "error %d while processing queue %u\n",
|
|
|
- ret, txq->qnum);
|
|
|
- break;
|
|
|
- }
|
|
|
-
|
|
|
- sc->stats.tx_all_count++;
|
|
|
- skb = bf->skb;
|
|
|
- info = IEEE80211_SKB_CB(skb);
|
|
|
- bf->skb = NULL;
|
|
|
-
|
|
|
- pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
|
|
|
- PCI_DMA_TODEVICE);
|
|
|
-
|
|
|
- ieee80211_tx_info_clear_status(info);
|
|
|
- for (i = 0; i < 4; i++) {
|
|
|
- struct ieee80211_tx_rate *r =
|
|
|
- &info->status.rates[i];
|
|
|
-
|
|
|
- if (ts.ts_rate[i]) {
|
|
|
- r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
|
|
|
- r->count = ts.ts_retry[i];
|
|
|
- } else {
|
|
|
- r->idx = -1;
|
|
|
- r->count = 0;
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- /* count the successful attempt as well */
|
|
|
- info->status.rates[ts.ts_final_idx].count++;
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
|
|
|
+ ieee80211_queue_work(sc->hw, &sc->reset_work);
|
|
|
+ }
|
|
|
+ if (ath5k_hw_phy_calibrate(ah, sc->curchan))
|
|
|
+ ATH5K_ERR(sc, "calibration of channel %u failed\n",
|
|
|
+ ieee80211_frequency_to_channel(
|
|
|
+ sc->curchan->center_freq));
|
|
|
|
|
|
- if (unlikely(ts.ts_status)) {
|
|
|
- sc->stats.ack_fail++;
|
|
|
- if (ts.ts_status & AR5K_TXERR_FILT) {
|
|
|
- info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
|
|
|
- sc->stats.txerr_filt++;
|
|
|
- }
|
|
|
- if (ts.ts_status & AR5K_TXERR_XRETRY)
|
|
|
- sc->stats.txerr_retry++;
|
|
|
- if (ts.ts_status & AR5K_TXERR_FIFO)
|
|
|
- sc->stats.txerr_fifo++;
|
|
|
- } else {
|
|
|
- info->flags |= IEEE80211_TX_STAT_ACK;
|
|
|
- info->status.ack_signal = ts.ts_rssi;
|
|
|
- }
|
|
|
+ /* Noise floor calibration interrupts rx/tx path while I/Q calibration
|
|
|
+ * doesn't.
|
|
|
+ * TODO: We should stop TX here, so that it doesn't interfere.
|
|
|
+ * Note that stopping the queues is not enough to stop TX! */
|
|
|
+ if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) {
|
|
|
+ ah->ah_cal_next_nf = jiffies +
|
|
|
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF);
|
|
|
+ ath5k_hw_update_noise_floor(ah);
|
|
|
+ }
|
|
|
|
|
|
- /*
|
|
|
- * Remove MAC header padding before giving the frame
|
|
|
- * back to mac80211.
|
|
|
- */
|
|
|
- ath5k_remove_padding(skb);
|
|
|
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
|
|
|
+}
|
|
|
|
|
|
- if (ts.ts_antenna > 0 && ts.ts_antenna < 5)
|
|
|
- sc->stats.antenna_tx[ts.ts_antenna]++;
|
|
|
- else
|
|
|
- sc->stats.antenna_tx[0]++; /* invalid */
|
|
|
|
|
|
- ieee80211_tx_status(sc->hw, skb);
|
|
|
+static void
|
|
|
+ath5k_tasklet_ani(unsigned long data)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = (void *)data;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
|
|
|
- spin_lock(&sc->txbuflock);
|
|
|
- list_move_tail(&bf->list, &sc->txbuf);
|
|
|
- sc->txbuf_len++;
|
|
|
- spin_unlock(&sc->txbuflock);
|
|
|
- }
|
|
|
- if (likely(list_empty(&txq->q)))
|
|
|
- txq->link = NULL;
|
|
|
- spin_unlock(&txq->lock);
|
|
|
- if (sc->txbuf_len > ATH_TXBUF / 5)
|
|
|
- ieee80211_wake_queues(sc->hw);
|
|
|
+ ah->ah_cal_mask |= AR5K_CALIBRATION_ANI;
|
|
|
+ ath5k_ani_calibration(ah);
|
|
|
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI;
|
|
|
}
|
|
|
|
|
|
+
|
|
|
static void
|
|
|
-ath5k_tasklet_tx(unsigned long data)
|
|
|
+ath5k_tx_complete_poll_work(struct work_struct *work)
|
|
|
{
|
|
|
+ struct ath5k_softc *sc = container_of(work, struct ath5k_softc,
|
|
|
+ tx_complete_work.work);
|
|
|
+ struct ath5k_txq *txq;
|
|
|
int i;
|
|
|
- struct ath5k_softc *sc = (void *)data;
|
|
|
+ bool needreset = false;
|
|
|
+
|
|
|
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
|
|
|
+ if (sc->txqs[i].setup) {
|
|
|
+ txq = &sc->txqs[i];
|
|
|
+ spin_lock_bh(&txq->lock);
|
|
|
+ if (txq->txq_len > 1) {
|
|
|
+ if (txq->txq_poll_mark) {
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_XMIT,
|
|
|
+ "TX queue stuck %d\n",
|
|
|
+ txq->qnum);
|
|
|
+ needreset = true;
|
|
|
+ txq->txq_stuck++;
|
|
|
+ spin_unlock_bh(&txq->lock);
|
|
|
+ break;
|
|
|
+ } else {
|
|
|
+ txq->txq_poll_mark = true;
|
|
|
+ }
|
|
|
+ }
|
|
|
+ spin_unlock_bh(&txq->lock);
|
|
|
+ }
|
|
|
+ }
|
|
|
|
|
|
- for (i=0; i < AR5K_NUM_TX_QUEUES; i++)
|
|
|
- if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i)))
|
|
|
- ath5k_tx_processq(sc, &sc->txqs[i]);
|
|
|
+ if (needreset) {
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
+ "TX queues stuck, resetting\n");
|
|
|
+ ath5k_reset(sc, sc->curchan);
|
|
|
+ }
|
|
|
+
|
|
|
+ ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
|
|
|
+ msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
|
|
|
}
|
|
|
|
|
|
|
|
|
-/*****************\
|
|
|
-* Beacon handling *
|
|
|
-\*****************/
|
|
|
+/*************************\
|
|
|
+* Initialization routines *
|
|
|
+\*************************/
|
|
|
|
|
|
-/*
|
|
|
- * Setup the beacon frame for transmit.
|
|
|
- */
|
|
|
static int
|
|
|
-ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
|
|
|
+ath5k_stop_locked(struct ath5k_softc *sc)
|
|
|
{
|
|
|
- struct sk_buff *skb = bf->skb;
|
|
|
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath5k_desc *ds;
|
|
|
- int ret = 0;
|
|
|
- u8 antenna;
|
|
|
- u32 flags;
|
|
|
- const int padsize = 0;
|
|
|
-
|
|
|
- bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
|
|
|
- PCI_DMA_TODEVICE);
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
|
|
|
- "skbaddr %llx\n", skb, skb->data, skb->len,
|
|
|
- (unsigned long long)bf->skbaddr);
|
|
|
- if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
|
|
|
- ATH5K_ERR(sc, "beacon DMA mapping failed\n");
|
|
|
- return -EIO;
|
|
|
- }
|
|
|
-
|
|
|
- ds = bf->desc;
|
|
|
- antenna = ah->ah_tx_ant;
|
|
|
|
|
|
- flags = AR5K_TXDESC_NOACK;
|
|
|
- if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
|
|
|
- ds->ds_link = bf->daddr; /* self-linked */
|
|
|
- flags |= AR5K_TXDESC_VEOL;
|
|
|
- } else
|
|
|
- ds->ds_link = 0;
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
|
|
|
+ test_bit(ATH_STAT_INVALID, sc->status));
|
|
|
|
|
|
/*
|
|
|
- * If we use multiple antennas on AP and use
|
|
|
- * the Sectored AP scenario, switch antenna every
|
|
|
- * 4 beacons to make sure everybody hears our AP.
|
|
|
- * When a client tries to associate, hw will keep
|
|
|
- * track of the tx antenna to be used for this client
|
|
|
- * automaticaly, based on ACKed packets.
|
|
|
- *
|
|
|
- * Note: AP still listens and transmits RTS on the
|
|
|
- * default antenna which is supposed to be an omni.
|
|
|
+ * Shutdown the hardware and driver:
|
|
|
+ * stop output from above
|
|
|
+ * disable interrupts
|
|
|
+ * turn off timers
|
|
|
+ * turn off the radio
|
|
|
+ * clear transmit machinery
|
|
|
+ * clear receive machinery
|
|
|
+ * drain and release tx queues
|
|
|
+ * reclaim beacon resources
|
|
|
+ * power down hardware
|
|
|
*
|
|
|
- * Note2: On sectored scenarios it's possible to have
|
|
|
- * multiple antennas (1 omni -- the default -- and 14
|
|
|
- * sectors), so if we choose to actually support this
|
|
|
- * mode, we need to allow the user to set how many antennas
|
|
|
- * we have and tweak the code below to send beacons
|
|
|
- * on all of them.
|
|
|
+ * Note that some of this work is not possible if the
|
|
|
+ * hardware is gone (invalid).
|
|
|
*/
|
|
|
- if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
|
|
|
- antenna = sc->bsent & 4 ? 2 : 1;
|
|
|
-
|
|
|
+ ieee80211_stop_queues(sc->hw);
|
|
|
|
|
|
- /* FIXME: If we are in g mode and rate is a CCK rate
|
|
|
- * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
|
|
|
- * from tx power (value is in dB units already) */
|
|
|
- ds->ds_data = bf->skbaddr;
|
|
|
- ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
|
|
|
- ieee80211_get_hdrlen_from_skb(skb), padsize,
|
|
|
- AR5K_PKT_TYPE_BEACON, (sc->power_level * 2),
|
|
|
- ieee80211_get_tx_rate(sc->hw, info)->hw_value,
|
|
|
- 1, AR5K_TXKEYIX_INVALID,
|
|
|
- antenna, flags, 0, 0);
|
|
|
- if (ret)
|
|
|
- goto err_unmap;
|
|
|
+ if (!test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
|
+ ath5k_led_off(sc);
|
|
|
+ ath5k_hw_set_imr(ah, 0);
|
|
|
+ synchronize_irq(sc->pdev->irq);
|
|
|
+ }
|
|
|
+ ath5k_txq_cleanup(sc);
|
|
|
+ if (!test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
|
+ ath5k_rx_stop(sc);
|
|
|
+ ath5k_hw_phy_disable(ah);
|
|
|
+ }
|
|
|
|
|
|
return 0;
|
|
|
-err_unmap:
|
|
|
- pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
|
|
|
- return ret;
|
|
|
}
|
|
|
|
|
|
-/*
|
|
|
- * Transmit a beacon frame at SWBA. Dynamic updates to the
|
|
|
- * frame contents are done as needed and the slot time is
|
|
|
- * also adjusted based on current state.
|
|
|
- *
|
|
|
- * This is called from software irq context (beacontq tasklets)
|
|
|
- * or user context from ath5k_beacon_config.
|
|
|
- */
|
|
|
-static void
|
|
|
-ath5k_beacon_send(struct ath5k_softc *sc)
|
|
|
+static int
|
|
|
+ath5k_init(struct ath5k_softc *sc)
|
|
|
{
|
|
|
- struct ath5k_buf *bf = sc->bbuf;
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- struct sk_buff *skb;
|
|
|
+ struct ath_common *common = ath5k_hw_common(ah);
|
|
|
+ int ret, i;
|
|
|
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
|
|
|
+ mutex_lock(&sc->lock);
|
|
|
+
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
|
|
|
|
|
|
- if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION)) {
|
|
|
- ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
|
|
|
- return;
|
|
|
- }
|
|
|
/*
|
|
|
- * Check if the previous beacon has gone out. If
|
|
|
- * not, don't don't try to post another: skip this
|
|
|
- * period and wait for the next. Missed beacons
|
|
|
- * indicate a problem and should not occur. If we
|
|
|
- * miss too many consecutive beacons reset the device.
|
|
|
+ * Stop anything previously setup. This is safe
|
|
|
+ * no matter this is the first time through or not.
|
|
|
*/
|
|
|
- if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
|
|
|
- sc->bmisscount++;
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "missed %u consecutive beacons\n", sc->bmisscount);
|
|
|
- if (sc->bmisscount > 10) { /* NB: 10 is a guess */
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "stuck beacon time (%u missed)\n",
|
|
|
- sc->bmisscount);
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
- "stuck beacon, resetting\n");
|
|
|
- ieee80211_queue_work(sc->hw, &sc->reset_work);
|
|
|
- }
|
|
|
- return;
|
|
|
- }
|
|
|
- if (unlikely(sc->bmisscount != 0)) {
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "resume beacon xmit after %u misses\n",
|
|
|
- sc->bmisscount);
|
|
|
- sc->bmisscount = 0;
|
|
|
- }
|
|
|
+ ath5k_stop_locked(sc);
|
|
|
|
|
|
/*
|
|
|
- * Stop any current dma and put the new frame on the queue.
|
|
|
- * This should never fail since we check above that no frames
|
|
|
- * are still pending on the queue.
|
|
|
+ * The basic interface to setting the hardware in a good
|
|
|
+ * state is ``reset''. On return the hardware is known to
|
|
|
+ * be powered up and with interrupts disabled. This must
|
|
|
+ * be followed by initialization of the appropriate bits
|
|
|
+ * and then setup of the interrupt mask.
|
|
|
*/
|
|
|
- if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
|
|
|
- ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
|
|
|
- /* NB: hw still stops DMA, so proceed */
|
|
|
+ sc->curchan = sc->hw->conf.channel;
|
|
|
+ sc->curband = &sc->sbands[sc->curchan->band];
|
|
|
+ sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
|
|
|
+ AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
|
|
|
+ AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
|
|
|
+
|
|
|
+ ret = ath5k_reset(sc, NULL);
|
|
|
+ if (ret)
|
|
|
+ goto done;
|
|
|
+
|
|
|
+ ath5k_rfkill_hw_start(ah);
|
|
|
+
|
|
|
+ /*
|
|
|
+ * Reset the key cache since some parts do not reset the
|
|
|
+ * contents on initial power up or resume from suspend.
|
|
|
+ */
|
|
|
+ for (i = 0; i < common->keymax; i++)
|
|
|
+ ath_hw_keyreset(common, (u16) i);
|
|
|
+
|
|
|
+ ath5k_hw_set_ack_bitrate_high(ah, true);
|
|
|
+ ret = 0;
|
|
|
+done:
|
|
|
+ mmiowb();
|
|
|
+ mutex_unlock(&sc->lock);
|
|
|
+
|
|
|
+ ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
|
|
|
+ msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
|
|
|
+
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static void stop_tasklets(struct ath5k_softc *sc)
|
|
|
+{
|
|
|
+ tasklet_kill(&sc->rxtq);
|
|
|
+ tasklet_kill(&sc->txtq);
|
|
|
+ tasklet_kill(&sc->calib);
|
|
|
+ tasklet_kill(&sc->beacontq);
|
|
|
+ tasklet_kill(&sc->ani_tasklet);
|
|
|
+}
|
|
|
+
|
|
|
+/*
|
|
|
+ * Stop the device, grabbing the top-level lock to protect
|
|
|
+ * against concurrent entry through ath5k_init (which can happen
|
|
|
+ * if another thread does a system call and the thread doing the
|
|
|
+ * stop is preempted).
|
|
|
+ */
|
|
|
+static int
|
|
|
+ath5k_stop_hw(struct ath5k_softc *sc)
|
|
|
+{
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ mutex_lock(&sc->lock);
|
|
|
+ ret = ath5k_stop_locked(sc);
|
|
|
+ if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
|
+ /*
|
|
|
+ * Don't set the card in full sleep mode!
|
|
|
+ *
|
|
|
+ * a) When the device is in this state it must be carefully
|
|
|
+ * woken up or references to registers in the PCI clock
|
|
|
+ * domain may freeze the bus (and system). This varies
|
|
|
+ * by chip and is mostly an issue with newer parts
|
|
|
+ * (madwifi sources mentioned srev >= 0x78) that go to
|
|
|
+ * sleep more quickly.
|
|
|
+ *
|
|
|
+ * b) On older chips full sleep results a weird behaviour
|
|
|
+ * during wakeup. I tested various cards with srev < 0x78
|
|
|
+ * and they don't wake up after module reload, a second
|
|
|
+ * module reload is needed to bring the card up again.
|
|
|
+ *
|
|
|
+ * Until we figure out what's going on don't enable
|
|
|
+ * full chip reset on any chip (this is what Legacy HAL
|
|
|
+ * and Sam's HAL do anyway). Instead Perform a full reset
|
|
|
+ * on the device (same as initial state after attach) and
|
|
|
+ * leave it idle (keep MAC/BB on warm reset) */
|
|
|
+ ret = ath5k_hw_on_hold(sc->ah);
|
|
|
+
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
+ "putting device to sleep\n");
|
|
|
}
|
|
|
+ ath5k_txbuf_free_skb(sc, sc->bbuf);
|
|
|
|
|
|
- /* refresh the beacon for AP mode */
|
|
|
- if (sc->opmode == NL80211_IFTYPE_AP)
|
|
|
- ath5k_beacon_update(sc->hw, sc->vif);
|
|
|
+ mmiowb();
|
|
|
+ mutex_unlock(&sc->lock);
|
|
|
|
|
|
- ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
|
|
|
- ath5k_hw_start_tx_dma(ah, sc->bhalq);
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
|
|
|
- sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
|
|
|
+ stop_tasklets(sc);
|
|
|
|
|
|
- skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
|
|
|
- while (skb) {
|
|
|
- ath5k_tx_queue(sc->hw, skb, sc->cabq);
|
|
|
- skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
|
|
|
- }
|
|
|
+ cancel_delayed_work_sync(&sc->tx_complete_work);
|
|
|
|
|
|
- sc->bsent++;
|
|
|
-}
|
|
|
+ ath5k_rfkill_hw_stop(sc->ah);
|
|
|
|
|
|
+ return ret;
|
|
|
+}
|
|
|
|
|
|
-/**
|
|
|
- * ath5k_beacon_update_timers - update beacon timers
|
|
|
- *
|
|
|
- * @sc: struct ath5k_softc pointer we are operating on
|
|
|
- * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
|
|
|
- * beacon timer update based on the current HW TSF.
|
|
|
- *
|
|
|
- * Calculate the next target beacon transmit time (TBTT) based on the timestamp
|
|
|
- * of a received beacon or the current local hardware TSF and write it to the
|
|
|
- * beacon timer registers.
|
|
|
+/*
|
|
|
+ * Reset the hardware. If chan is not NULL, then also pause rx/tx
|
|
|
+ * and change to the given channel.
|
|
|
*
|
|
|
- * This is called in a variety of situations, e.g. when a beacon is received,
|
|
|
- * when a TSF update has been detected, but also when an new IBSS is created or
|
|
|
- * when we otherwise know we have to update the timers, but we keep it in this
|
|
|
- * function to have it all together in one place.
|
|
|
+ * This should be called with sc->lock.
|
|
|
*/
|
|
|
-static void
|
|
|
-ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
|
|
|
+static int
|
|
|
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
|
|
|
{
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- u32 nexttbtt, intval, hw_tu, bc_tu;
|
|
|
- u64 hw_tsf;
|
|
|
+ int ret;
|
|
|
|
|
|
- intval = sc->bintval & AR5K_BEACON_PERIOD;
|
|
|
- if (WARN_ON(!intval))
|
|
|
- return;
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
|
|
|
|
|
|
- /* beacon TSF converted to TU */
|
|
|
- bc_tu = TSF_TO_TU(bc_tsf);
|
|
|
+ ath5k_hw_set_imr(ah, 0);
|
|
|
+ synchronize_irq(sc->pdev->irq);
|
|
|
+ stop_tasklets(sc);
|
|
|
|
|
|
- /* current TSF converted to TU */
|
|
|
- hw_tsf = ath5k_hw_get_tsf64(ah);
|
|
|
- hw_tu = TSF_TO_TU(hw_tsf);
|
|
|
+ if (chan) {
|
|
|
+ ath5k_txq_cleanup(sc);
|
|
|
+ ath5k_rx_stop(sc);
|
|
|
|
|
|
-#define FUDGE 3
|
|
|
- /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
|
|
|
- if (bc_tsf == -1) {
|
|
|
- /*
|
|
|
- * no beacons received, called internally.
|
|
|
- * just need to refresh timers based on HW TSF.
|
|
|
- */
|
|
|
- nexttbtt = roundup(hw_tu + FUDGE, intval);
|
|
|
- } else if (bc_tsf == 0) {
|
|
|
- /*
|
|
|
- * no beacon received, probably called by ath5k_reset_tsf().
|
|
|
- * reset TSF to start with 0.
|
|
|
- */
|
|
|
- nexttbtt = intval;
|
|
|
- intval |= AR5K_BEACON_RESET_TSF;
|
|
|
- } else if (bc_tsf > hw_tsf) {
|
|
|
- /*
|
|
|
- * beacon received, SW merge happend but HW TSF not yet updated.
|
|
|
- * not possible to reconfigure timers yet, but next time we
|
|
|
- * receive a beacon with the same BSSID, the hardware will
|
|
|
- * automatically update the TSF and then we need to reconfigure
|
|
|
- * the timers.
|
|
|
- */
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "need to wait for HW TSF sync\n");
|
|
|
- return;
|
|
|
- } else {
|
|
|
- /*
|
|
|
- * most important case for beacon synchronization between STA.
|
|
|
- *
|
|
|
- * beacon received and HW TSF has been already updated by HW.
|
|
|
- * update next TBTT based on the TSF of the beacon, but make
|
|
|
- * sure it is ahead of our local TSF timer.
|
|
|
- */
|
|
|
- nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
|
|
|
+ sc->curchan = chan;
|
|
|
+ sc->curband = &sc->sbands[chan->band];
|
|
|
+ }
|
|
|
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
|
|
|
+ goto err;
|
|
|
}
|
|
|
-#undef FUDGE
|
|
|
|
|
|
- sc->nexttbtt = nexttbtt;
|
|
|
+ ret = ath5k_rx_start(sc);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "can't start recv logic\n");
|
|
|
+ goto err;
|
|
|
+ }
|
|
|
|
|
|
- intval |= AR5K_BEACON_ENA;
|
|
|
- ath5k_hw_init_beacon(ah, nexttbtt, intval);
|
|
|
+ ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode);
|
|
|
+
|
|
|
+ ah->ah_cal_next_full = jiffies;
|
|
|
+ ah->ah_cal_next_ani = jiffies;
|
|
|
+ ah->ah_cal_next_nf = jiffies;
|
|
|
|
|
|
/*
|
|
|
- * debugging output last in order to preserve the time critical aspect
|
|
|
- * of this function
|
|
|
+ * Change channels and update the h/w rate map if we're switching;
|
|
|
+ * e.g. 11a to 11b/g.
|
|
|
+ *
|
|
|
+ * We may be doing a reset in response to an ioctl that changes the
|
|
|
+ * channel so update any state that might change as a result.
|
|
|
+ *
|
|
|
+ * XXX needed?
|
|
|
*/
|
|
|
- if (bc_tsf == -1)
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "reconfigured timers based on HW TSF\n");
|
|
|
- else if (bc_tsf == 0)
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "reset HW TSF and timers\n");
|
|
|
- else
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "updated timers based on beacon TSF\n");
|
|
|
+/* ath5k_chan_change(sc, c); */
|
|
|
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
|
|
|
- (unsigned long long) bc_tsf,
|
|
|
- (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
|
|
|
- ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
|
|
|
- intval & AR5K_BEACON_PERIOD,
|
|
|
- intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
|
|
|
- intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
|
|
|
+ ath5k_beacon_config(sc);
|
|
|
+ /* intrs are enabled by ath5k_beacon_config */
|
|
|
+
|
|
|
+ ieee80211_wake_queues(sc->hw);
|
|
|
+
|
|
|
+ return 0;
|
|
|
+err:
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
+static void ath5k_reset_work(struct work_struct *work)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = container_of(work, struct ath5k_softc,
|
|
|
+ reset_work);
|
|
|
|
|
|
-/**
|
|
|
- * ath5k_beacon_config - Configure the beacon queues and interrupts
|
|
|
- *
|
|
|
- * @sc: struct ath5k_softc pointer we are operating on
|
|
|
- *
|
|
|
- * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
|
|
|
- * interrupts to detect TSF updates only.
|
|
|
- */
|
|
|
-static void
|
|
|
-ath5k_beacon_config(struct ath5k_softc *sc)
|
|
|
+ mutex_lock(&sc->lock);
|
|
|
+ ath5k_reset(sc, sc->curchan);
|
|
|
+ mutex_unlock(&sc->lock);
|
|
|
+}
|
|
|
+
|
|
|
+static int
|
|
|
+ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
|
|
|
{
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- unsigned long flags;
|
|
|
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
|
|
|
+ struct ath5k_txq *txq;
|
|
|
+ u8 mac[ETH_ALEN] = {};
|
|
|
+ int ret;
|
|
|
|
|
|
- spin_lock_irqsave(&sc->block, flags);
|
|
|
- sc->bmisscount = 0;
|
|
|
- sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
|
|
|
|
|
|
- if (sc->enable_beacon) {
|
|
|
- /*
|
|
|
- * In IBSS mode we use a self-linked tx descriptor and let the
|
|
|
- * hardware send the beacons automatically. We have to load it
|
|
|
- * only once here.
|
|
|
- * We use the SWBA interrupt only to keep track of the beacon
|
|
|
- * timers in order to detect automatic TSF updates.
|
|
|
- */
|
|
|
- ath5k_beaconq_config(sc);
|
|
|
+ /*
|
|
|
+ * Check if the MAC has multi-rate retry support.
|
|
|
+ * We do this by trying to setup a fake extended
|
|
|
+ * descriptor. MACs that don't have support will
|
|
|
+ * return false w/o doing anything. MACs that do
|
|
|
+ * support it will return true w/o doing anything.
|
|
|
+ */
|
|
|
+ ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
|
|
|
+
|
|
|
+ if (ret < 0)
|
|
|
+ goto err;
|
|
|
+ if (ret > 0)
|
|
|
+ __set_bit(ATH_STAT_MRRETRY, sc->status);
|
|
|
+
|
|
|
+ /*
|
|
|
+ * Collect the channel list. The 802.11 layer
|
|
|
+ * is resposible for filtering this list based
|
|
|
+ * on settings like the phy mode and regulatory
|
|
|
+ * domain restrictions.
|
|
|
+ */
|
|
|
+ ret = ath5k_setup_bands(hw);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "can't get channels\n");
|
|
|
+ goto err;
|
|
|
+ }
|
|
|
+
|
|
|
+ /* NB: setup here so ath5k_rate_update is happy */
|
|
|
+ if (test_bit(AR5K_MODE_11A, ah->ah_modes))
|
|
|
+ ath5k_setcurmode(sc, AR5K_MODE_11A);
|
|
|
+ else
|
|
|
+ ath5k_setcurmode(sc, AR5K_MODE_11B);
|
|
|
+
|
|
|
+ /*
|
|
|
+ * Allocate tx+rx descriptors and populate the lists.
|
|
|
+ */
|
|
|
+ ret = ath5k_desc_alloc(sc, pdev);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "can't allocate descriptors\n");
|
|
|
+ goto err;
|
|
|
+ }
|
|
|
+
|
|
|
+ /*
|
|
|
+ * Allocate hardware transmit queues: one queue for
|
|
|
+ * beacon frames and one data queue for each QoS
|
|
|
+ * priority. Note that hw functions handle resetting
|
|
|
+ * these queues at the needed time.
|
|
|
+ */
|
|
|
+ ret = ath5k_beaconq_setup(ah);
|
|
|
+ if (ret < 0) {
|
|
|
+ ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
|
|
|
+ goto err_desc;
|
|
|
+ }
|
|
|
+ sc->bhalq = ret;
|
|
|
+ sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0);
|
|
|
+ if (IS_ERR(sc->cabq)) {
|
|
|
+ ATH5K_ERR(sc, "can't setup cab queue\n");
|
|
|
+ ret = PTR_ERR(sc->cabq);
|
|
|
+ goto err_bhal;
|
|
|
+ }
|
|
|
+
|
|
|
+ /* This order matches mac80211's queue priority, so we can
|
|
|
+ * directly use the mac80211 queue number without any mapping */
|
|
|
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
|
|
|
+ if (IS_ERR(txq)) {
|
|
|
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
|
|
|
+ ret = PTR_ERR(txq);
|
|
|
+ goto err_queues;
|
|
|
+ }
|
|
|
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
|
|
|
+ if (IS_ERR(txq)) {
|
|
|
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
|
|
|
+ ret = PTR_ERR(txq);
|
|
|
+ goto err_queues;
|
|
|
+ }
|
|
|
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
|
|
|
+ if (IS_ERR(txq)) {
|
|
|
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
|
|
|
+ ret = PTR_ERR(txq);
|
|
|
+ goto err_queues;
|
|
|
+ }
|
|
|
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
|
|
|
+ if (IS_ERR(txq)) {
|
|
|
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
|
|
|
+ ret = PTR_ERR(txq);
|
|
|
+ goto err_queues;
|
|
|
+ }
|
|
|
+ hw->queues = 4;
|
|
|
|
|
|
- sc->imask |= AR5K_INT_SWBA;
|
|
|
+ tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
|
|
|
+ tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
|
|
|
+ tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc);
|
|
|
+ tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
|
|
|
+ tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc);
|
|
|
|
|
|
- if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
|
- if (ath5k_hw_hasveol(ah))
|
|
|
- ath5k_beacon_send(sc);
|
|
|
- } else
|
|
|
- ath5k_beacon_update_timers(sc, -1);
|
|
|
- } else {
|
|
|
- ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
|
|
|
- }
|
|
|
+ INIT_WORK(&sc->reset_work, ath5k_reset_work);
|
|
|
+ INIT_DELAYED_WORK(&sc->tx_complete_work, ath5k_tx_complete_poll_work);
|
|
|
|
|
|
- ath5k_hw_set_imr(ah, sc->imask);
|
|
|
- mmiowb();
|
|
|
- spin_unlock_irqrestore(&sc->block, flags);
|
|
|
-}
|
|
|
+ ret = ath5k_eeprom_read_mac(ah, mac);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
|
|
|
+ sc->pdev->device);
|
|
|
+ goto err_queues;
|
|
|
+ }
|
|
|
|
|
|
-static void ath5k_tasklet_beacon(unsigned long data)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = (struct ath5k_softc *) data;
|
|
|
+ SET_IEEE80211_PERM_ADDR(hw, mac);
|
|
|
+ /* All MAC address bits matter for ACKs */
|
|
|
+ memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
|
|
|
+ ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
|
|
|
|
|
|
- /*
|
|
|
- * Software beacon alert--time to send a beacon.
|
|
|
- *
|
|
|
- * In IBSS mode we use this interrupt just to
|
|
|
- * keep track of the next TBTT (target beacon
|
|
|
- * transmission time) in order to detect wether
|
|
|
- * automatic TSF updates happened.
|
|
|
- */
|
|
|
- if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
|
- /* XXX: only if VEOL suppported */
|
|
|
- u64 tsf = ath5k_hw_get_tsf64(sc->ah);
|
|
|
- sc->nexttbtt += sc->bintval;
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
|
- "SWBA nexttbtt: %x hw_tu: %x "
|
|
|
- "TSF: %llx\n",
|
|
|
- sc->nexttbtt,
|
|
|
- TSF_TO_TU(tsf),
|
|
|
- (unsigned long long) tsf);
|
|
|
- } else {
|
|
|
- spin_lock(&sc->block);
|
|
|
- ath5k_beacon_send(sc);
|
|
|
- spin_unlock(&sc->block);
|
|
|
+ regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
|
|
|
+ ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "can't initialize regulatory system\n");
|
|
|
+ goto err_queues;
|
|
|
}
|
|
|
-}
|
|
|
|
|
|
+ ret = ieee80211_register_hw(hw);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "can't register ieee80211 hw\n");
|
|
|
+ goto err_queues;
|
|
|
+ }
|
|
|
|
|
|
-/********************\
|
|
|
-* Interrupt handling *
|
|
|
-\********************/
|
|
|
+ if (!ath_is_world_regd(regulatory))
|
|
|
+ regulatory_hint(hw->wiphy, regulatory->alpha2);
|
|
|
|
|
|
-static int
|
|
|
-ath5k_init(struct ath5k_softc *sc)
|
|
|
-{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- int ret, i;
|
|
|
+ ath5k_init_leds(sc);
|
|
|
|
|
|
- mutex_lock(&sc->lock);
|
|
|
+ ath5k_sysfs_register(sc);
|
|
|
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
|
|
|
+ return 0;
|
|
|
+err_queues:
|
|
|
+ ath5k_txq_release(sc);
|
|
|
+err_bhal:
|
|
|
+ ath5k_hw_release_tx_queue(ah, sc->bhalq);
|
|
|
+err_desc:
|
|
|
+ ath5k_desc_free(sc, pdev);
|
|
|
+err:
|
|
|
+ return ret;
|
|
|
+}
|
|
|
|
|
|
- /*
|
|
|
- * Stop anything previously setup. This is safe
|
|
|
- * no matter this is the first time through or not.
|
|
|
- */
|
|
|
- ath5k_stop_locked(sc);
|
|
|
+static void
|
|
|
+ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
|
|
|
/*
|
|
|
- * The basic interface to setting the hardware in a good
|
|
|
- * state is ``reset''. On return the hardware is known to
|
|
|
- * be powered up and with interrupts disabled. This must
|
|
|
- * be followed by initialization of the appropriate bits
|
|
|
- * and then setup of the interrupt mask.
|
|
|
+ * NB: the order of these is important:
|
|
|
+ * o call the 802.11 layer before detaching ath5k_hw to
|
|
|
+ * ensure callbacks into the driver to delete global
|
|
|
+ * key cache entries can be handled
|
|
|
+ * o reclaim the tx queue data structures after calling
|
|
|
+ * the 802.11 layer as we'll get called back to reclaim
|
|
|
+ * node state and potentially want to use them
|
|
|
+ * o to cleanup the tx queues the hal is called, so detach
|
|
|
+ * it last
|
|
|
+ * XXX: ??? detach ath5k_hw ???
|
|
|
+ * Other than that, it's straightforward...
|
|
|
*/
|
|
|
- sc->curchan = sc->hw->conf.channel;
|
|
|
- sc->curband = &sc->sbands[sc->curchan->band];
|
|
|
- sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
|
|
|
- AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
|
|
|
- AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
|
|
|
-
|
|
|
- ret = ath5k_reset(sc, NULL);
|
|
|
- if (ret)
|
|
|
- goto done;
|
|
|
-
|
|
|
- ath5k_rfkill_hw_start(ah);
|
|
|
+ ieee80211_unregister_hw(hw);
|
|
|
+ ath5k_desc_free(sc, pdev);
|
|
|
+ ath5k_txq_release(sc);
|
|
|
+ ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
|
|
|
+ ath5k_unregister_leds(sc);
|
|
|
|
|
|
+ ath5k_sysfs_unregister(sc);
|
|
|
/*
|
|
|
- * Reset the key cache since some parts do not reset the
|
|
|
- * contents on initial power up or resume from suspend.
|
|
|
+ * NB: can't reclaim these until after ieee80211_ifdetach
|
|
|
+ * returns because we'll get called back to reclaim node
|
|
|
+ * state and potentially want to use them.
|
|
|
*/
|
|
|
- for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
|
|
|
- ath5k_hw_reset_key(ah, i);
|
|
|
-
|
|
|
- ath5k_hw_set_ack_bitrate_high(ah, true);
|
|
|
- ret = 0;
|
|
|
-done:
|
|
|
- mmiowb();
|
|
|
- mutex_unlock(&sc->lock);
|
|
|
- return ret;
|
|
|
}
|
|
|
|
|
|
+/********************\
|
|
|
+* Mac80211 functions *
|
|
|
+\********************/
|
|
|
+
|
|
|
static int
|
|
|
-ath5k_stop_locked(struct ath5k_softc *sc)
|
|
|
+ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
|
|
|
{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
-
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
|
|
|
- test_bit(ATH_STAT_INVALID, sc->status));
|
|
|
-
|
|
|
- /*
|
|
|
- * Shutdown the hardware and driver:
|
|
|
- * stop output from above
|
|
|
- * disable interrupts
|
|
|
- * turn off timers
|
|
|
- * turn off the radio
|
|
|
- * clear transmit machinery
|
|
|
- * clear receive machinery
|
|
|
- * drain and release tx queues
|
|
|
- * reclaim beacon resources
|
|
|
- * power down hardware
|
|
|
- *
|
|
|
- * Note that some of this work is not possible if the
|
|
|
- * hardware is gone (invalid).
|
|
|
- */
|
|
|
- ieee80211_stop_queues(sc->hw);
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+ u16 qnum = skb_get_queue_mapping(skb);
|
|
|
|
|
|
- if (!test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
|
- ath5k_led_off(sc);
|
|
|
- ath5k_hw_set_imr(ah, 0);
|
|
|
- synchronize_irq(sc->pdev->irq);
|
|
|
- }
|
|
|
- ath5k_txq_cleanup(sc);
|
|
|
- if (!test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
|
- ath5k_rx_stop(sc);
|
|
|
- ath5k_hw_phy_disable(ah);
|
|
|
+ if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) {
|
|
|
+ dev_kfree_skb_any(skb);
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
- return 0;
|
|
|
+ return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]);
|
|
|
}
|
|
|
|
|
|
-static void stop_tasklets(struct ath5k_softc *sc)
|
|
|
+static int ath5k_start(struct ieee80211_hw *hw)
|
|
|
{
|
|
|
- tasklet_kill(&sc->rxtq);
|
|
|
- tasklet_kill(&sc->txtq);
|
|
|
- tasklet_kill(&sc->calib);
|
|
|
- tasklet_kill(&sc->beacontq);
|
|
|
- tasklet_kill(&sc->ani_tasklet);
|
|
|
+ return ath5k_init(hw->priv);
|
|
|
}
|
|
|
|
|
|
-/*
|
|
|
- * Stop the device, grabbing the top-level lock to protect
|
|
|
- * against concurrent entry through ath5k_init (which can happen
|
|
|
- * if another thread does a system call and the thread doing the
|
|
|
- * stop is preempted).
|
|
|
- */
|
|
|
-static int
|
|
|
-ath5k_stop_hw(struct ath5k_softc *sc)
|
|
|
+static void ath5k_stop(struct ieee80211_hw *hw)
|
|
|
+{
|
|
|
+ ath5k_stop_hw(hw->priv);
|
|
|
+}
|
|
|
+
|
|
|
+static int ath5k_add_interface(struct ieee80211_hw *hw,
|
|
|
+ struct ieee80211_vif *vif)
|
|
|
{
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
int ret;
|
|
|
|
|
|
mutex_lock(&sc->lock);
|
|
|
- ret = ath5k_stop_locked(sc);
|
|
|
- if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
|
- /*
|
|
|
- * Don't set the card in full sleep mode!
|
|
|
- *
|
|
|
- * a) When the device is in this state it must be carefully
|
|
|
- * woken up or references to registers in the PCI clock
|
|
|
- * domain may freeze the bus (and system). This varies
|
|
|
- * by chip and is mostly an issue with newer parts
|
|
|
- * (madwifi sources mentioned srev >= 0x78) that go to
|
|
|
- * sleep more quickly.
|
|
|
- *
|
|
|
- * b) On older chips full sleep results a weird behaviour
|
|
|
- * during wakeup. I tested various cards with srev < 0x78
|
|
|
- * and they don't wake up after module reload, a second
|
|
|
- * module reload is needed to bring the card up again.
|
|
|
- *
|
|
|
- * Until we figure out what's going on don't enable
|
|
|
- * full chip reset on any chip (this is what Legacy HAL
|
|
|
- * and Sam's HAL do anyway). Instead Perform a full reset
|
|
|
- * on the device (same as initial state after attach) and
|
|
|
- * leave it idle (keep MAC/BB on warm reset) */
|
|
|
- ret = ath5k_hw_on_hold(sc->ah);
|
|
|
-
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
- "putting device to sleep\n");
|
|
|
+ if (sc->vif) {
|
|
|
+ ret = 0;
|
|
|
+ goto end;
|
|
|
}
|
|
|
- ath5k_txbuf_free_skb(sc, sc->bbuf);
|
|
|
|
|
|
- mmiowb();
|
|
|
- mutex_unlock(&sc->lock);
|
|
|
+ sc->vif = vif;
|
|
|
|
|
|
- stop_tasklets(sc);
|
|
|
+ switch (vif->type) {
|
|
|
+ case NL80211_IFTYPE_AP:
|
|
|
+ case NL80211_IFTYPE_STATION:
|
|
|
+ case NL80211_IFTYPE_ADHOC:
|
|
|
+ case NL80211_IFTYPE_MESH_POINT:
|
|
|
+ sc->opmode = vif->type;
|
|
|
+ break;
|
|
|
+ default:
|
|
|
+ ret = -EOPNOTSUPP;
|
|
|
+ goto end;
|
|
|
+ }
|
|
|
+
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", sc->opmode);
|
|
|
|
|
|
- ath5k_rfkill_hw_stop(sc->ah);
|
|
|
+ ath5k_hw_set_lladdr(sc->ah, vif->addr);
|
|
|
+ ath5k_mode_setup(sc);
|
|
|
|
|
|
+ ret = 0;
|
|
|
+end:
|
|
|
+ mutex_unlock(&sc->lock);
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
static void
|
|
|
-ath5k_intr_calibration_poll(struct ath5k_hw *ah)
|
|
|
+ath5k_remove_interface(struct ieee80211_hw *hw,
|
|
|
+ struct ieee80211_vif *vif)
|
|
|
{
|
|
|
- if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) &&
|
|
|
- !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) {
|
|
|
- /* run ANI only when full calibration is not active */
|
|
|
- ah->ah_cal_next_ani = jiffies +
|
|
|
- msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
|
|
|
- tasklet_schedule(&ah->ah_sc->ani_tasklet);
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+ u8 mac[ETH_ALEN] = {};
|
|
|
|
|
|
- } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
|
|
|
- ah->ah_cal_next_full = jiffies +
|
|
|
- msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
|
|
|
- tasklet_schedule(&ah->ah_sc->calib);
|
|
|
- }
|
|
|
- /* we could use SWI to generate enough interrupts to meet our
|
|
|
- * calibration interval requirements, if necessary:
|
|
|
- * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
|
|
|
+ mutex_lock(&sc->lock);
|
|
|
+ if (sc->vif != vif)
|
|
|
+ goto end;
|
|
|
+
|
|
|
+ ath5k_hw_set_lladdr(sc->ah, mac);
|
|
|
+ sc->vif = NULL;
|
|
|
+end:
|
|
|
+ mutex_unlock(&sc->lock);
|
|
|
}
|
|
|
|
|
|
-static irqreturn_t
|
|
|
-ath5k_intr(int irq, void *dev_id)
|
|
|
+/*
|
|
|
+ * TODO: Phy disable/diversity etc
|
|
|
+ */
|
|
|
+static int
|
|
|
+ath5k_config(struct ieee80211_hw *hw, u32 changed)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = dev_id;
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- enum ath5k_int status;
|
|
|
- unsigned int counter = 1000;
|
|
|
+ struct ieee80211_conf *conf = &hw->conf;
|
|
|
+ int ret = 0;
|
|
|
|
|
|
- if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
|
|
|
- !ath5k_hw_is_intr_pending(ah)))
|
|
|
- return IRQ_NONE;
|
|
|
+ mutex_lock(&sc->lock);
|
|
|
|
|
|
- do {
|
|
|
- ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
|
|
|
- status, sc->imask);
|
|
|
- if (unlikely(status & AR5K_INT_FATAL)) {
|
|
|
- /*
|
|
|
- * Fatal errors are unrecoverable.
|
|
|
- * Typically these are caused by DMA errors.
|
|
|
- */
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
- "fatal int, resetting\n");
|
|
|
- ieee80211_queue_work(sc->hw, &sc->reset_work);
|
|
|
- } else if (unlikely(status & AR5K_INT_RXORN)) {
|
|
|
- /*
|
|
|
- * Receive buffers are full. Either the bus is busy or
|
|
|
- * the CPU is not fast enough to process all received
|
|
|
- * frames.
|
|
|
- * Older chipsets need a reset to come out of this
|
|
|
- * condition, but we treat it as RX for newer chips.
|
|
|
- * We don't know exactly which versions need a reset -
|
|
|
- * this guess is copied from the HAL.
|
|
|
- */
|
|
|
- sc->stats.rxorn_intr++;
|
|
|
- if (ah->ah_mac_srev < AR5K_SREV_AR5212) {
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
|
- "rx overrun, resetting\n");
|
|
|
- ieee80211_queue_work(sc->hw, &sc->reset_work);
|
|
|
- }
|
|
|
- else
|
|
|
- tasklet_schedule(&sc->rxtq);
|
|
|
- } else {
|
|
|
- if (status & AR5K_INT_SWBA) {
|
|
|
- tasklet_hi_schedule(&sc->beacontq);
|
|
|
- }
|
|
|
- if (status & AR5K_INT_RXEOL) {
|
|
|
- /*
|
|
|
- * NB: the hardware should re-read the link when
|
|
|
- * RXE bit is written, but it doesn't work at
|
|
|
- * least on older hardware revs.
|
|
|
- */
|
|
|
- sc->stats.rxeol_intr++;
|
|
|
- }
|
|
|
- if (status & AR5K_INT_TXURN) {
|
|
|
- /* bump tx trigger level */
|
|
|
- ath5k_hw_update_tx_triglevel(ah, true);
|
|
|
- }
|
|
|
- if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
|
|
|
- tasklet_schedule(&sc->rxtq);
|
|
|
- if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
|
|
|
- | AR5K_INT_TXERR | AR5K_INT_TXEOL))
|
|
|
- tasklet_schedule(&sc->txtq);
|
|
|
- if (status & AR5K_INT_BMISS) {
|
|
|
- /* TODO */
|
|
|
- }
|
|
|
- if (status & AR5K_INT_MIB) {
|
|
|
- sc->stats.mib_intr++;
|
|
|
- ath5k_hw_update_mib_counters(ah);
|
|
|
- ath5k_ani_mib_intr(ah);
|
|
|
- }
|
|
|
- if (status & AR5K_INT_GPIO)
|
|
|
- tasklet_schedule(&sc->rf_kill.toggleq);
|
|
|
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
|
|
|
+ ret = ath5k_chan_set(sc, conf->channel);
|
|
|
+ if (ret < 0)
|
|
|
+ goto unlock;
|
|
|
+ }
|
|
|
|
|
|
- }
|
|
|
- } while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
|
|
|
+ if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
|
|
|
+ (sc->power_level != conf->power_level)) {
|
|
|
+ sc->power_level = conf->power_level;
|
|
|
|
|
|
- if (unlikely(!counter))
|
|
|
- ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
|
|
|
+ /* Half dB steps */
|
|
|
+ ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
|
|
|
+ }
|
|
|
|
|
|
- ath5k_intr_calibration_poll(ah);
|
|
|
+ /* TODO:
|
|
|
+ * 1) Move this on config_interface and handle each case
|
|
|
+ * separately eg. when we have only one STA vif, use
|
|
|
+ * AR5K_ANTMODE_SINGLE_AP
|
|
|
+ *
|
|
|
+ * 2) Allow the user to change antenna mode eg. when only
|
|
|
+ * one antenna is present
|
|
|
+ *
|
|
|
+ * 3) Allow the user to set default/tx antenna when possible
|
|
|
+ *
|
|
|
+ * 4) Default mode should handle 90% of the cases, together
|
|
|
+ * with fixed a/b and single AP modes we should be able to
|
|
|
+ * handle 99%. Sectored modes are extreme cases and i still
|
|
|
+ * haven't found a usage for them. If we decide to support them,
|
|
|
+ * then we must allow the user to set how many tx antennas we
|
|
|
+ * have available
|
|
|
+ */
|
|
|
+ ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
|
|
|
|
|
|
- return IRQ_HANDLED;
|
|
|
+unlock:
|
|
|
+ mutex_unlock(&sc->lock);
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
|
|
|
+ struct netdev_hw_addr_list *mc_list)
|
|
|
+{
|
|
|
+ u32 mfilt[2], val;
|
|
|
+ u8 pos;
|
|
|
+ struct netdev_hw_addr *ha;
|
|
|
+
|
|
|
+ mfilt[0] = 0;
|
|
|
+ mfilt[1] = 1;
|
|
|
+
|
|
|
+ netdev_hw_addr_list_for_each(ha, mc_list) {
|
|
|
+ /* calculate XOR of eight 6-bit values */
|
|
|
+ val = get_unaligned_le32(ha->addr + 0);
|
|
|
+ pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
|
|
|
+ val = get_unaligned_le32(ha->addr + 3);
|
|
|
+ pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
|
|
|
+ pos &= 0x3f;
|
|
|
+ mfilt[pos / 32] |= (1 << (pos % 32));
|
|
|
+ /* XXX: we might be able to just do this instead,
|
|
|
+ * but not sure, needs testing, if we do use this we'd
|
|
|
+ * neet to inform below to not reset the mcast */
|
|
|
+ /* ath5k_hw_set_mcast_filterindex(ah,
|
|
|
+ * ha->addr[5]); */
|
|
|
+ }
|
|
|
+
|
|
|
+ return ((u64)(mfilt[1]) << 32) | mfilt[0];
|
|
|
}
|
|
|
|
|
|
+#define SUPPORTED_FIF_FLAGS \
|
|
|
+ FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
|
|
|
+ FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
|
|
|
+ FIF_BCN_PRBRESP_PROMISC
|
|
|
/*
|
|
|
- * Periodically recalibrate the PHY to account
|
|
|
- * for temperature/environment changes.
|
|
|
+ * o always accept unicast, broadcast, and multicast traffic
|
|
|
+ * o multicast traffic for all BSSIDs will be enabled if mac80211
|
|
|
+ * says it should be
|
|
|
+ * o maintain current state of phy ofdm or phy cck error reception.
|
|
|
+ * If the hardware detects any of these type of errors then
|
|
|
+ * ath5k_hw_get_rx_filter() will pass to us the respective
|
|
|
+ * hardware filters to be able to receive these type of frames.
|
|
|
+ * o probe request frames are accepted only when operating in
|
|
|
+ * hostap, adhoc, or monitor modes
|
|
|
+ * o enable promiscuous mode according to the interface state
|
|
|
+ * o accept beacons:
|
|
|
+ * - when operating in adhoc mode so the 802.11 layer creates
|
|
|
+ * node table entries for peers,
|
|
|
+ * - when operating in station mode for collecting rssi data when
|
|
|
+ * the station is otherwise quiet, or
|
|
|
+ * - when scanning
|
|
|
*/
|
|
|
-static void
|
|
|
-ath5k_tasklet_calibrate(unsigned long data)
|
|
|
+static void ath5k_configure_filter(struct ieee80211_hw *hw,
|
|
|
+ unsigned int changed_flags,
|
|
|
+ unsigned int *new_flags,
|
|
|
+ u64 multicast)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = (void *)data;
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
+ u32 mfilt[2], rfilt;
|
|
|
|
|
|
- /* Only full calibration for now */
|
|
|
- ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
|
|
|
+ mutex_lock(&sc->lock);
|
|
|
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
|
|
|
- ieee80211_frequency_to_channel(sc->curchan->center_freq),
|
|
|
- sc->curchan->hw_value);
|
|
|
+ mfilt[0] = multicast;
|
|
|
+ mfilt[1] = multicast >> 32;
|
|
|
|
|
|
- if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
|
|
|
- /*
|
|
|
- * Rfgain is out of bounds, reset the chip
|
|
|
- * to load new gain values.
|
|
|
- */
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
|
|
|
- ieee80211_queue_work(sc->hw, &sc->reset_work);
|
|
|
+ /* Only deal with supported flags */
|
|
|
+ changed_flags &= SUPPORTED_FIF_FLAGS;
|
|
|
+ *new_flags &= SUPPORTED_FIF_FLAGS;
|
|
|
+
|
|
|
+ /* If HW detects any phy or radar errors, leave those filters on.
|
|
|
+ * Also, always enable Unicast, Broadcasts and Multicast
|
|
|
+ * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
|
|
|
+ rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
|
|
|
+ (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
|
|
|
+ AR5K_RX_FILTER_MCAST);
|
|
|
+
|
|
|
+ if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
|
|
|
+ if (*new_flags & FIF_PROMISC_IN_BSS) {
|
|
|
+ __set_bit(ATH_STAT_PROMISC, sc->status);
|
|
|
+ } else {
|
|
|
+ __clear_bit(ATH_STAT_PROMISC, sc->status);
|
|
|
+ }
|
|
|
}
|
|
|
- if (ath5k_hw_phy_calibrate(ah, sc->curchan))
|
|
|
- ATH5K_ERR(sc, "calibration of channel %u failed\n",
|
|
|
- ieee80211_frequency_to_channel(
|
|
|
- sc->curchan->center_freq));
|
|
|
|
|
|
- /* Noise floor calibration interrupts rx/tx path while I/Q calibration
|
|
|
- * doesn't. We stop the queues so that calibration doesn't interfere
|
|
|
- * with TX and don't run it as often */
|
|
|
- if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) {
|
|
|
- ah->ah_cal_next_nf = jiffies +
|
|
|
- msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF);
|
|
|
- ieee80211_stop_queues(sc->hw);
|
|
|
- ath5k_hw_update_noise_floor(ah);
|
|
|
- ieee80211_wake_queues(sc->hw);
|
|
|
+ if (test_bit(ATH_STAT_PROMISC, sc->status))
|
|
|
+ rfilt |= AR5K_RX_FILTER_PROM;
|
|
|
+
|
|
|
+ /* Note, AR5K_RX_FILTER_MCAST is already enabled */
|
|
|
+ if (*new_flags & FIF_ALLMULTI) {
|
|
|
+ mfilt[0] = ~0;
|
|
|
+ mfilt[1] = ~0;
|
|
|
}
|
|
|
|
|
|
- ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
|
|
|
-}
|
|
|
+ /* This is the best we can do */
|
|
|
+ if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
|
|
|
+ rfilt |= AR5K_RX_FILTER_PHYERR;
|
|
|
|
|
|
+ /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
|
|
|
+ * and probes for any BSSID */
|
|
|
+ if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
|
|
|
+ rfilt |= AR5K_RX_FILTER_BEACON;
|
|
|
|
|
|
-static void
|
|
|
-ath5k_tasklet_ani(unsigned long data)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = (void *)data;
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
+ /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
|
|
|
+ * set we should only pass on control frames for this
|
|
|
+ * station. This needs testing. I believe right now this
|
|
|
+ * enables *all* control frames, which is OK.. but
|
|
|
+ * but we should see if we can improve on granularity */
|
|
|
+ if (*new_flags & FIF_CONTROL)
|
|
|
+ rfilt |= AR5K_RX_FILTER_CONTROL;
|
|
|
|
|
|
- ah->ah_cal_mask |= AR5K_CALIBRATION_ANI;
|
|
|
- ath5k_ani_calibration(ah);
|
|
|
- ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI;
|
|
|
-}
|
|
|
+ /* Additional settings per mode -- this is per ath5k */
|
|
|
|
|
|
+ /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
|
|
|
|
|
|
-/********************\
|
|
|
-* Mac80211 functions *
|
|
|
-\********************/
|
|
|
+ switch (sc->opmode) {
|
|
|
+ case NL80211_IFTYPE_MESH_POINT:
|
|
|
+ rfilt |= AR5K_RX_FILTER_CONTROL |
|
|
|
+ AR5K_RX_FILTER_BEACON |
|
|
|
+ AR5K_RX_FILTER_PROBEREQ |
|
|
|
+ AR5K_RX_FILTER_PROM;
|
|
|
+ break;
|
|
|
+ case NL80211_IFTYPE_AP:
|
|
|
+ case NL80211_IFTYPE_ADHOC:
|
|
|
+ rfilt |= AR5K_RX_FILTER_PROBEREQ |
|
|
|
+ AR5K_RX_FILTER_BEACON;
|
|
|
+ break;
|
|
|
+ case NL80211_IFTYPE_STATION:
|
|
|
+ if (sc->assoc)
|
|
|
+ rfilt |= AR5K_RX_FILTER_BEACON;
|
|
|
+ default:
|
|
|
+ break;
|
|
|
+ }
|
|
|
|
|
|
-static int
|
|
|
-ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
+ /* Set filters */
|
|
|
+ ath5k_hw_set_rx_filter(ah, rfilt);
|
|
|
+
|
|
|
+ /* Set multicast bits */
|
|
|
+ ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
|
|
|
+ /* Set the cached hw filter flags, this will later actually
|
|
|
+ * be set in HW */
|
|
|
+ sc->filter_flags = rfilt;
|
|
|
|
|
|
- return ath5k_tx_queue(hw, skb, sc->txq);
|
|
|
+ mutex_unlock(&sc->lock);
|
|
|
}
|
|
|
|
|
|
-static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
|
|
|
- struct ath5k_txq *txq)
|
|
|
+static int
|
|
|
+ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
|
|
|
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
|
|
|
+ struct ieee80211_key_conf *key)
|
|
|
{
|
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ath5k_buf *bf;
|
|
|
- unsigned long flags;
|
|
|
- int padsize;
|
|
|
-
|
|
|
- ath5k_debug_dump_skb(sc, skb, "TX ", 1);
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct ath_common *common = ath5k_hw_common(ah);
|
|
|
+ int ret = 0;
|
|
|
|
|
|
- /*
|
|
|
- * The hardware expects the header padded to 4 byte boundaries.
|
|
|
- * If this is not the case, we add the padding after the header.
|
|
|
- */
|
|
|
- padsize = ath5k_add_padding(skb);
|
|
|
- if (padsize < 0) {
|
|
|
- ATH5K_ERR(sc, "tx hdrlen not %%4: not enough"
|
|
|
- " headroom to pad");
|
|
|
- goto drop_packet;
|
|
|
- }
|
|
|
+ if (modparam_nohwcrypt)
|
|
|
+ return -EOPNOTSUPP;
|
|
|
|
|
|
- spin_lock_irqsave(&sc->txbuflock, flags);
|
|
|
- if (list_empty(&sc->txbuf)) {
|
|
|
- ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
|
|
|
- spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
|
- ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
|
|
|
- goto drop_packet;
|
|
|
+ switch (key->cipher) {
|
|
|
+ case WLAN_CIPHER_SUITE_WEP40:
|
|
|
+ case WLAN_CIPHER_SUITE_WEP104:
|
|
|
+ case WLAN_CIPHER_SUITE_TKIP:
|
|
|
+ break;
|
|
|
+ case WLAN_CIPHER_SUITE_CCMP:
|
|
|
+ if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM)
|
|
|
+ break;
|
|
|
+ return -EOPNOTSUPP;
|
|
|
+ default:
|
|
|
+ WARN_ON(1);
|
|
|
+ return -EINVAL;
|
|
|
}
|
|
|
- bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
|
|
|
- list_del(&bf->list);
|
|
|
- sc->txbuf_len--;
|
|
|
- if (list_empty(&sc->txbuf))
|
|
|
- ieee80211_stop_queues(hw);
|
|
|
- spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
|
|
|
|
- bf->skb = skb;
|
|
|
+ mutex_lock(&sc->lock);
|
|
|
|
|
|
- if (ath5k_txbuf_setup(sc, bf, txq, padsize)) {
|
|
|
- bf->skb = NULL;
|
|
|
- spin_lock_irqsave(&sc->txbuflock, flags);
|
|
|
- list_add_tail(&bf->list, &sc->txbuf);
|
|
|
- sc->txbuf_len++;
|
|
|
- spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
|
- goto drop_packet;
|
|
|
+ switch (cmd) {
|
|
|
+ case SET_KEY:
|
|
|
+ ret = ath_key_config(common, vif, sta, key);
|
|
|
+ if (ret >= 0) {
|
|
|
+ key->hw_key_idx = ret;
|
|
|
+ /* push IV and Michael MIC generation to stack */
|
|
|
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
|
|
|
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
|
|
|
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
|
|
|
+ if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
|
|
|
+ key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
|
|
|
+ ret = 0;
|
|
|
+ }
|
|
|
+ break;
|
|
|
+ case DISABLE_KEY:
|
|
|
+ ath_key_delete(common, key);
|
|
|
+ break;
|
|
|
+ default:
|
|
|
+ ret = -EINVAL;
|
|
|
}
|
|
|
- return NETDEV_TX_OK;
|
|
|
|
|
|
-drop_packet:
|
|
|
- dev_kfree_skb_any(skb);
|
|
|
- return NETDEV_TX_OK;
|
|
|
+ mmiowb();
|
|
|
+ mutex_unlock(&sc->lock);
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
-/*
|
|
|
- * Reset the hardware. If chan is not NULL, then also pause rx/tx
|
|
|
- * and change to the given channel.
|
|
|
- *
|
|
|
- * This should be called with sc->lock.
|
|
|
- */
|
|
|
static int
|
|
|
-ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
|
|
|
+ath5k_get_stats(struct ieee80211_hw *hw,
|
|
|
+ struct ieee80211_low_level_stats *stats)
|
|
|
{
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- int ret;
|
|
|
-
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
|
|
|
-
|
|
|
- ath5k_hw_set_imr(ah, 0);
|
|
|
- synchronize_irq(sc->pdev->irq);
|
|
|
- stop_tasklets(sc);
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
|
|
|
- if (chan) {
|
|
|
- ath5k_txq_cleanup(sc);
|
|
|
- ath5k_rx_stop(sc);
|
|
|
+ /* Force update */
|
|
|
+ ath5k_hw_update_mib_counters(sc->ah);
|
|
|
|
|
|
- sc->curchan = chan;
|
|
|
- sc->curband = &sc->sbands[chan->band];
|
|
|
- }
|
|
|
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
|
|
|
- goto err;
|
|
|
- }
|
|
|
+ stats->dot11ACKFailureCount = sc->stats.ack_fail;
|
|
|
+ stats->dot11RTSFailureCount = sc->stats.rts_fail;
|
|
|
+ stats->dot11RTSSuccessCount = sc->stats.rts_ok;
|
|
|
+ stats->dot11FCSErrorCount = sc->stats.fcs_error;
|
|
|
|
|
|
- ret = ath5k_rx_start(sc);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "can't start recv logic\n");
|
|
|
- goto err;
|
|
|
- }
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode);
|
|
|
+static int ath5k_get_survey(struct ieee80211_hw *hw, int idx,
|
|
|
+ struct survey_info *survey)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+ struct ieee80211_conf *conf = &hw->conf;
|
|
|
|
|
|
- ah->ah_cal_next_full = jiffies;
|
|
|
- ah->ah_cal_next_ani = jiffies;
|
|
|
- ah->ah_cal_next_nf = jiffies;
|
|
|
+ if (idx != 0)
|
|
|
+ return -ENOENT;
|
|
|
|
|
|
- /*
|
|
|
- * Change channels and update the h/w rate map if we're switching;
|
|
|
- * e.g. 11a to 11b/g.
|
|
|
- *
|
|
|
- * We may be doing a reset in response to an ioctl that changes the
|
|
|
- * channel so update any state that might change as a result.
|
|
|
- *
|
|
|
- * XXX needed?
|
|
|
- */
|
|
|
-/* ath5k_chan_change(sc, c); */
|
|
|
+ survey->channel = conf->channel;
|
|
|
+ survey->filled = SURVEY_INFO_NOISE_DBM;
|
|
|
+ survey->noise = sc->ah->ah_noise_floor;
|
|
|
|
|
|
- ath5k_beacon_config(sc);
|
|
|
- /* intrs are enabled by ath5k_beacon_config */
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- ieee80211_wake_queues(sc->hw);
|
|
|
+static u64
|
|
|
+ath5k_get_tsf(struct ieee80211_hw *hw)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
|
|
|
- return 0;
|
|
|
-err:
|
|
|
- return ret;
|
|
|
+ return ath5k_hw_get_tsf64(sc->ah);
|
|
|
}
|
|
|
|
|
|
-static void ath5k_reset_work(struct work_struct *work)
|
|
|
+static void
|
|
|
+ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = container_of(work, struct ath5k_softc,
|
|
|
- reset_work);
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
|
|
|
- mutex_lock(&sc->lock);
|
|
|
- ath5k_reset(sc, sc->curchan);
|
|
|
- mutex_unlock(&sc->lock);
|
|
|
+ ath5k_hw_set_tsf64(sc->ah, tsf);
|
|
|
}
|
|
|
|
|
|
-static int ath5k_start(struct ieee80211_hw *hw)
|
|
|
+static void
|
|
|
+ath5k_reset_tsf(struct ieee80211_hw *hw)
|
|
|
{
|
|
|
- return ath5k_init(hw->priv);
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+
|
|
|
+ /*
|
|
|
+ * in IBSS mode we need to update the beacon timers too.
|
|
|
+ * this will also reset the TSF if we call it with 0
|
|
|
+ */
|
|
|
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
|
|
|
+ ath5k_beacon_update_timers(sc, 0);
|
|
|
+ else
|
|
|
+ ath5k_hw_reset_tsf(sc->ah);
|
|
|
}
|
|
|
|
|
|
-static void ath5k_stop(struct ieee80211_hw *hw)
|
|
|
+static void
|
|
|
+set_beacon_filter(struct ieee80211_hw *hw, bool enable)
|
|
|
{
|
|
|
- ath5k_stop_hw(hw->priv);
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ u32 rfilt;
|
|
|
+ rfilt = ath5k_hw_get_rx_filter(ah);
|
|
|
+ if (enable)
|
|
|
+ rfilt |= AR5K_RX_FILTER_BEACON;
|
|
|
+ else
|
|
|
+ rfilt &= ~AR5K_RX_FILTER_BEACON;
|
|
|
+ ath5k_hw_set_rx_filter(ah, rfilt);
|
|
|
+ sc->filter_flags = rfilt;
|
|
|
}
|
|
|
|
|
|
-static int ath5k_add_interface(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_vif *vif)
|
|
|
+static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
|
|
|
+ struct ieee80211_vif *vif,
|
|
|
+ struct ieee80211_bss_conf *bss_conf,
|
|
|
+ u32 changes)
|
|
|
{
|
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
- int ret;
|
|
|
+ struct ath5k_hw *ah = sc->ah;
|
|
|
+ struct ath_common *common = ath5k_hw_common(ah);
|
|
|
+ unsigned long flags;
|
|
|
|
|
|
mutex_lock(&sc->lock);
|
|
|
- if (sc->vif) {
|
|
|
- ret = 0;
|
|
|
- goto end;
|
|
|
+ if (WARN_ON(sc->vif != vif))
|
|
|
+ goto unlock;
|
|
|
+
|
|
|
+ if (changes & BSS_CHANGED_BSSID) {
|
|
|
+ /* Cache for later use during resets */
|
|
|
+ memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
|
|
|
+ common->curaid = 0;
|
|
|
+ ath5k_hw_set_bssid(ah);
|
|
|
+ mmiowb();
|
|
|
}
|
|
|
|
|
|
- sc->vif = vif;
|
|
|
+ if (changes & BSS_CHANGED_BEACON_INT)
|
|
|
+ sc->bintval = bss_conf->beacon_int;
|
|
|
|
|
|
- switch (vif->type) {
|
|
|
- case NL80211_IFTYPE_AP:
|
|
|
- case NL80211_IFTYPE_STATION:
|
|
|
- case NL80211_IFTYPE_ADHOC:
|
|
|
- case NL80211_IFTYPE_MESH_POINT:
|
|
|
- sc->opmode = vif->type;
|
|
|
- break;
|
|
|
- default:
|
|
|
- ret = -EOPNOTSUPP;
|
|
|
- goto end;
|
|
|
+ if (changes & BSS_CHANGED_ASSOC) {
|
|
|
+ sc->assoc = bss_conf->assoc;
|
|
|
+ if (sc->opmode == NL80211_IFTYPE_STATION)
|
|
|
+ set_beacon_filter(hw, sc->assoc);
|
|
|
+ ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
|
|
|
+ AR5K_LED_ASSOC : AR5K_LED_INIT);
|
|
|
+ if (bss_conf->assoc) {
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
|
|
|
+ "Bss Info ASSOC %d, bssid: %pM\n",
|
|
|
+ bss_conf->aid, common->curbssid);
|
|
|
+ common->curaid = bss_conf->aid;
|
|
|
+ ath5k_hw_set_bssid(ah);
|
|
|
+ /* Once ANI is available you would start it here */
|
|
|
+ }
|
|
|
}
|
|
|
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", sc->opmode);
|
|
|
+ if (changes & BSS_CHANGED_BEACON) {
|
|
|
+ spin_lock_irqsave(&sc->block, flags);
|
|
|
+ ath5k_beacon_update(hw, vif);
|
|
|
+ spin_unlock_irqrestore(&sc->block, flags);
|
|
|
+ }
|
|
|
|
|
|
- ath5k_hw_set_lladdr(sc->ah, vif->addr);
|
|
|
- ath5k_mode_setup(sc);
|
|
|
+ if (changes & BSS_CHANGED_BEACON_ENABLED)
|
|
|
+ sc->enable_beacon = bss_conf->enable_beacon;
|
|
|
|
|
|
- ret = 0;
|
|
|
-end:
|
|
|
+ if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
|
|
|
+ BSS_CHANGED_BEACON_INT))
|
|
|
+ ath5k_beacon_config(sc);
|
|
|
+
|
|
|
+ unlock:
|
|
|
mutex_unlock(&sc->lock);
|
|
|
- return ret;
|
|
|
}
|
|
|
|
|
|
-static void
|
|
|
-ath5k_remove_interface(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_vif *vif)
|
|
|
+static void ath5k_sw_scan_start(struct ieee80211_hw *hw)
|
|
|
{
|
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
- u8 mac[ETH_ALEN] = {};
|
|
|
+ if (!sc->assoc)
|
|
|
+ ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
|
|
|
+}
|
|
|
|
|
|
- mutex_lock(&sc->lock);
|
|
|
- if (sc->vif != vif)
|
|
|
- goto end;
|
|
|
+static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+ ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
|
|
|
+ AR5K_LED_ASSOC : AR5K_LED_INIT);
|
|
|
+}
|
|
|
|
|
|
- ath5k_hw_set_lladdr(sc->ah, mac);
|
|
|
- sc->vif = NULL;
|
|
|
-end:
|
|
|
+/**
|
|
|
+ * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
|
|
|
+ *
|
|
|
+ * @hw: struct ieee80211_hw pointer
|
|
|
+ * @coverage_class: IEEE 802.11 coverage class number
|
|
|
+ *
|
|
|
+ * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
|
|
|
+ * coverage class. The values are persistent, they are restored after device
|
|
|
+ * reset.
|
|
|
+ */
|
|
|
+static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
|
|
|
+{
|
|
|
+ struct ath5k_softc *sc = hw->priv;
|
|
|
+
|
|
|
+ mutex_lock(&sc->lock);
|
|
|
+ ath5k_hw_set_coverage_class(sc->ah, coverage_class);
|
|
|
mutex_unlock(&sc->lock);
|
|
|
}
|
|
|
|
|
|
-/*
|
|
|
- * TODO: Phy disable/diversity etc
|
|
|
- */
|
|
|
-static int
|
|
|
-ath5k_config(struct ieee80211_hw *hw, u32 changed)
|
|
|
+static int ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue,
|
|
|
+ const struct ieee80211_tx_queue_params *params)
|
|
|
{
|
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ieee80211_conf *conf = &hw->conf;
|
|
|
+ struct ath5k_txq_info qi;
|
|
|
int ret = 0;
|
|
|
|
|
|
+ if (queue >= ah->ah_capabilities.cap_queues.q_tx_num)
|
|
|
+ return 0;
|
|
|
+
|
|
|
mutex_lock(&sc->lock);
|
|
|
|
|
|
- if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
|
|
|
- ret = ath5k_chan_set(sc, conf->channel);
|
|
|
- if (ret < 0)
|
|
|
- goto unlock;
|
|
|
- }
|
|
|
+ ath5k_hw_get_tx_queueprops(ah, queue, &qi);
|
|
|
|
|
|
- if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
|
|
|
- (sc->power_level != conf->power_level)) {
|
|
|
- sc->power_level = conf->power_level;
|
|
|
+ qi.tqi_aifs = params->aifs;
|
|
|
+ qi.tqi_cw_min = params->cw_min;
|
|
|
+ qi.tqi_cw_max = params->cw_max;
|
|
|
+ qi.tqi_burst_time = params->txop;
|
|
|
|
|
|
- /* Half dB steps */
|
|
|
- ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
|
|
|
- }
|
|
|
+ ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
|
|
|
+ "Configure tx [queue %d], "
|
|
|
+ "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
|
|
|
+ queue, params->aifs, params->cw_min,
|
|
|
+ params->cw_max, params->txop);
|
|
|
|
|
|
- /* TODO:
|
|
|
- * 1) Move this on config_interface and handle each case
|
|
|
- * separately eg. when we have only one STA vif, use
|
|
|
- * AR5K_ANTMODE_SINGLE_AP
|
|
|
- *
|
|
|
- * 2) Allow the user to change antenna mode eg. when only
|
|
|
- * one antenna is present
|
|
|
- *
|
|
|
- * 3) Allow the user to set default/tx antenna when possible
|
|
|
- *
|
|
|
- * 4) Default mode should handle 90% of the cases, together
|
|
|
- * with fixed a/b and single AP modes we should be able to
|
|
|
- * handle 99%. Sectored modes are extreme cases and i still
|
|
|
- * haven't found a usage for them. If we decide to support them,
|
|
|
- * then we must allow the user to set how many tx antennas we
|
|
|
- * have available
|
|
|
- */
|
|
|
- ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
|
|
|
+ if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) {
|
|
|
+ ATH5K_ERR(sc,
|
|
|
+ "Unable to update hardware queue %u!\n", queue);
|
|
|
+ ret = -EIO;
|
|
|
+ } else
|
|
|
+ ath5k_hw_reset_tx_queue(ah, queue);
|
|
|
|
|
|
-unlock:
|
|
|
mutex_unlock(&sc->lock);
|
|
|
+
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
|
|
|
- struct netdev_hw_addr_list *mc_list)
|
|
|
-{
|
|
|
- u32 mfilt[2], val;
|
|
|
- u8 pos;
|
|
|
- struct netdev_hw_addr *ha;
|
|
|
+static const struct ieee80211_ops ath5k_hw_ops = {
|
|
|
+ .tx = ath5k_tx,
|
|
|
+ .start = ath5k_start,
|
|
|
+ .stop = ath5k_stop,
|
|
|
+ .add_interface = ath5k_add_interface,
|
|
|
+ .remove_interface = ath5k_remove_interface,
|
|
|
+ .config = ath5k_config,
|
|
|
+ .prepare_multicast = ath5k_prepare_multicast,
|
|
|
+ .configure_filter = ath5k_configure_filter,
|
|
|
+ .set_key = ath5k_set_key,
|
|
|
+ .get_stats = ath5k_get_stats,
|
|
|
+ .get_survey = ath5k_get_survey,
|
|
|
+ .conf_tx = ath5k_conf_tx,
|
|
|
+ .get_tsf = ath5k_get_tsf,
|
|
|
+ .set_tsf = ath5k_set_tsf,
|
|
|
+ .reset_tsf = ath5k_reset_tsf,
|
|
|
+ .bss_info_changed = ath5k_bss_info_changed,
|
|
|
+ .sw_scan_start = ath5k_sw_scan_start,
|
|
|
+ .sw_scan_complete = ath5k_sw_scan_complete,
|
|
|
+ .set_coverage_class = ath5k_set_coverage_class,
|
|
|
+};
|
|
|
|
|
|
- mfilt[0] = 0;
|
|
|
- mfilt[1] = 1;
|
|
|
+/********************\
|
|
|
+* PCI Initialization *
|
|
|
+\********************/
|
|
|
|
|
|
- netdev_hw_addr_list_for_each(ha, mc_list) {
|
|
|
- /* calculate XOR of eight 6-bit values */
|
|
|
- val = get_unaligned_le32(ha->addr + 0);
|
|
|
- pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
|
|
|
- val = get_unaligned_le32(ha->addr + 3);
|
|
|
- pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
|
|
|
- pos &= 0x3f;
|
|
|
- mfilt[pos / 32] |= (1 << (pos % 32));
|
|
|
- /* XXX: we might be able to just do this instead,
|
|
|
- * but not sure, needs testing, if we do use this we'd
|
|
|
- * neet to inform below to not reset the mcast */
|
|
|
- /* ath5k_hw_set_mcast_filterindex(ah,
|
|
|
- * ha->addr[5]); */
|
|
|
- }
|
|
|
+static int __devinit
|
|
|
+ath5k_pci_probe(struct pci_dev *pdev,
|
|
|
+ const struct pci_device_id *id)
|
|
|
+{
|
|
|
+ void __iomem *mem;
|
|
|
+ struct ath5k_softc *sc;
|
|
|
+ struct ath_common *common;
|
|
|
+ struct ieee80211_hw *hw;
|
|
|
+ int ret;
|
|
|
+ u8 csz;
|
|
|
|
|
|
- return ((u64)(mfilt[1]) << 32) | mfilt[0];
|
|
|
-}
|
|
|
+ /*
|
|
|
+ * L0s needs to be disabled on all ath5k cards.
|
|
|
+ *
|
|
|
+ * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
|
|
|
+ * by default in the future in 2.6.36) this will also mean both L1 and
|
|
|
+ * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
|
|
|
+ * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
|
|
|
+ * though but cannot currently undue the effect of a blacklist, for
|
|
|
+ * details you can read pcie_aspm_sanity_check() and see how it adjusts
|
|
|
+ * the device link capability.
|
|
|
+ *
|
|
|
+ * It may be possible in the future to implement some PCI API to allow
|
|
|
+ * drivers to override blacklists for pre 1.1 PCIe but for now it is
|
|
|
+ * best to accept that both L0s and L1 will be disabled completely for
|
|
|
+ * distributions shipping with CONFIG_PCIEASPM rather than having this
|
|
|
+ * issue present. Motivation for adding this new API will be to help
|
|
|
+ * with power consumption for some of these devices.
|
|
|
+ */
|
|
|
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
|
|
|
|
|
|
-#define SUPPORTED_FIF_FLAGS \
|
|
|
- FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
|
|
|
- FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
|
|
|
- FIF_BCN_PRBRESP_PROMISC
|
|
|
-/*
|
|
|
- * o always accept unicast, broadcast, and multicast traffic
|
|
|
- * o multicast traffic for all BSSIDs will be enabled if mac80211
|
|
|
- * says it should be
|
|
|
- * o maintain current state of phy ofdm or phy cck error reception.
|
|
|
- * If the hardware detects any of these type of errors then
|
|
|
- * ath5k_hw_get_rx_filter() will pass to us the respective
|
|
|
- * hardware filters to be able to receive these type of frames.
|
|
|
- * o probe request frames are accepted only when operating in
|
|
|
- * hostap, adhoc, or monitor modes
|
|
|
- * o enable promiscuous mode according to the interface state
|
|
|
- * o accept beacons:
|
|
|
- * - when operating in adhoc mode so the 802.11 layer creates
|
|
|
- * node table entries for peers,
|
|
|
- * - when operating in station mode for collecting rssi data when
|
|
|
- * the station is otherwise quiet, or
|
|
|
- * - when scanning
|
|
|
- */
|
|
|
-static void ath5k_configure_filter(struct ieee80211_hw *hw,
|
|
|
- unsigned int changed_flags,
|
|
|
- unsigned int *new_flags,
|
|
|
- u64 multicast)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- u32 mfilt[2], rfilt;
|
|
|
+ ret = pci_enable_device(pdev);
|
|
|
+ if (ret) {
|
|
|
+ dev_err(&pdev->dev, "can't enable device\n");
|
|
|
+ goto err;
|
|
|
+ }
|
|
|
|
|
|
- mutex_lock(&sc->lock);
|
|
|
+ /* XXX 32-bit addressing only */
|
|
|
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
|
+ if (ret) {
|
|
|
+ dev_err(&pdev->dev, "32-bit DMA not available\n");
|
|
|
+ goto err_dis;
|
|
|
+ }
|
|
|
|
|
|
- mfilt[0] = multicast;
|
|
|
- mfilt[1] = multicast >> 32;
|
|
|
+ /*
|
|
|
+ * Cache line size is used to size and align various
|
|
|
+ * structures used to communicate with the hardware.
|
|
|
+ */
|
|
|
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
|
|
|
+ if (csz == 0) {
|
|
|
+ /*
|
|
|
+ * Linux 2.4.18 (at least) writes the cache line size
|
|
|
+ * register as a 16-bit wide register which is wrong.
|
|
|
+ * We must have this setup properly for rx buffer
|
|
|
+ * DMA to work so force a reasonable value here if it
|
|
|
+ * comes up zero.
|
|
|
+ */
|
|
|
+ csz = L1_CACHE_BYTES >> 2;
|
|
|
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
|
|
|
+ }
|
|
|
+ /*
|
|
|
+ * The default setting of latency timer yields poor results,
|
|
|
+ * set it to the value used by other systems. It may be worth
|
|
|
+ * tweaking this setting more.
|
|
|
+ */
|
|
|
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
|
|
|
|
|
|
- /* Only deal with supported flags */
|
|
|
- changed_flags &= SUPPORTED_FIF_FLAGS;
|
|
|
- *new_flags &= SUPPORTED_FIF_FLAGS;
|
|
|
+ /* Enable bus mastering */
|
|
|
+ pci_set_master(pdev);
|
|
|
|
|
|
- /* If HW detects any phy or radar errors, leave those filters on.
|
|
|
- * Also, always enable Unicast, Broadcasts and Multicast
|
|
|
- * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
|
|
|
- rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
|
|
|
- (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
|
|
|
- AR5K_RX_FILTER_MCAST);
|
|
|
+ /*
|
|
|
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
|
|
|
+ * PCI Tx retries from interfering with C3 CPU state.
|
|
|
+ */
|
|
|
+ pci_write_config_byte(pdev, 0x41, 0);
|
|
|
|
|
|
- if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
|
|
|
- if (*new_flags & FIF_PROMISC_IN_BSS) {
|
|
|
- __set_bit(ATH_STAT_PROMISC, sc->status);
|
|
|
- } else {
|
|
|
- __clear_bit(ATH_STAT_PROMISC, sc->status);
|
|
|
- }
|
|
|
+ ret = pci_request_region(pdev, 0, "ath5k");
|
|
|
+ if (ret) {
|
|
|
+ dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
|
|
|
+ goto err_dis;
|
|
|
}
|
|
|
|
|
|
- if (test_bit(ATH_STAT_PROMISC, sc->status))
|
|
|
- rfilt |= AR5K_RX_FILTER_PROM;
|
|
|
-
|
|
|
- /* Note, AR5K_RX_FILTER_MCAST is already enabled */
|
|
|
- if (*new_flags & FIF_ALLMULTI) {
|
|
|
- mfilt[0] = ~0;
|
|
|
- mfilt[1] = ~0;
|
|
|
+ mem = pci_iomap(pdev, 0, 0);
|
|
|
+ if (!mem) {
|
|
|
+ dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
|
|
|
+ ret = -EIO;
|
|
|
+ goto err_reg;
|
|
|
}
|
|
|
|
|
|
- /* This is the best we can do */
|
|
|
- if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
|
|
|
- rfilt |= AR5K_RX_FILTER_PHYERR;
|
|
|
+ /*
|
|
|
+ * Allocate hw (mac80211 main struct)
|
|
|
+ * and hw->priv (driver private data)
|
|
|
+ */
|
|
|
+ hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
|
|
|
+ if (hw == NULL) {
|
|
|
+ dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
|
|
|
+ ret = -ENOMEM;
|
|
|
+ goto err_map;
|
|
|
+ }
|
|
|
|
|
|
- /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
|
|
|
- * and probes for any BSSID */
|
|
|
- if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
|
|
|
- rfilt |= AR5K_RX_FILTER_BEACON;
|
|
|
+ dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
|
|
|
|
|
|
- /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
|
|
|
- * set we should only pass on control frames for this
|
|
|
- * station. This needs testing. I believe right now this
|
|
|
- * enables *all* control frames, which is OK.. but
|
|
|
- * but we should see if we can improve on granularity */
|
|
|
- if (*new_flags & FIF_CONTROL)
|
|
|
- rfilt |= AR5K_RX_FILTER_CONTROL;
|
|
|
+ /* Initialize driver private data */
|
|
|
+ SET_IEEE80211_DEV(hw, &pdev->dev);
|
|
|
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
|
|
|
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
|
|
|
+ IEEE80211_HW_SIGNAL_DBM;
|
|
|
|
|
|
- /* Additional settings per mode -- this is per ath5k */
|
|
|
+ hw->wiphy->interface_modes =
|
|
|
+ BIT(NL80211_IFTYPE_AP) |
|
|
|
+ BIT(NL80211_IFTYPE_STATION) |
|
|
|
+ BIT(NL80211_IFTYPE_ADHOC) |
|
|
|
+ BIT(NL80211_IFTYPE_MESH_POINT);
|
|
|
|
|
|
- /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
|
|
|
+ hw->extra_tx_headroom = 2;
|
|
|
+ hw->channel_change_time = 5000;
|
|
|
+ sc = hw->priv;
|
|
|
+ sc->hw = hw;
|
|
|
+ sc->pdev = pdev;
|
|
|
|
|
|
- switch (sc->opmode) {
|
|
|
- case NL80211_IFTYPE_MESH_POINT:
|
|
|
- rfilt |= AR5K_RX_FILTER_CONTROL |
|
|
|
- AR5K_RX_FILTER_BEACON |
|
|
|
- AR5K_RX_FILTER_PROBEREQ |
|
|
|
- AR5K_RX_FILTER_PROM;
|
|
|
- break;
|
|
|
- case NL80211_IFTYPE_AP:
|
|
|
- case NL80211_IFTYPE_ADHOC:
|
|
|
- rfilt |= AR5K_RX_FILTER_PROBEREQ |
|
|
|
- AR5K_RX_FILTER_BEACON;
|
|
|
- break;
|
|
|
- case NL80211_IFTYPE_STATION:
|
|
|
- if (sc->assoc)
|
|
|
- rfilt |= AR5K_RX_FILTER_BEACON;
|
|
|
- default:
|
|
|
- break;
|
|
|
- }
|
|
|
+ ath5k_debug_init_device(sc);
|
|
|
|
|
|
- /* Set filters */
|
|
|
- ath5k_hw_set_rx_filter(ah, rfilt);
|
|
|
+ /*
|
|
|
+ * Mark the device as detached to avoid processing
|
|
|
+ * interrupts until setup is complete.
|
|
|
+ */
|
|
|
+ __set_bit(ATH_STAT_INVALID, sc->status);
|
|
|
|
|
|
- /* Set multicast bits */
|
|
|
- ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
|
|
|
- /* Set the cached hw filter flags, this will later actually
|
|
|
- * be set in HW */
|
|
|
- sc->filter_flags = rfilt;
|
|
|
+ sc->iobase = mem; /* So we can unmap it on detach */
|
|
|
+ sc->opmode = NL80211_IFTYPE_STATION;
|
|
|
+ sc->bintval = 1000;
|
|
|
+ mutex_init(&sc->lock);
|
|
|
+ spin_lock_init(&sc->rxbuflock);
|
|
|
+ spin_lock_init(&sc->txbuflock);
|
|
|
+ spin_lock_init(&sc->block);
|
|
|
|
|
|
- mutex_unlock(&sc->lock);
|
|
|
-}
|
|
|
+ /* Set private data */
|
|
|
+ pci_set_drvdata(pdev, sc);
|
|
|
|
|
|
-static int
|
|
|
-ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
|
|
|
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
|
|
|
- struct ieee80211_key_conf *key)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath_common *common = ath5k_hw_common(ah);
|
|
|
- int ret = 0;
|
|
|
+ /* Setup interrupt handler */
|
|
|
+ ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
|
|
|
+ if (ret) {
|
|
|
+ ATH5K_ERR(sc, "request_irq failed\n");
|
|
|
+ goto err_free;
|
|
|
+ }
|
|
|
|
|
|
- if (modparam_nohwcrypt)
|
|
|
- return -EOPNOTSUPP;
|
|
|
+ /* If we passed the test, malloc an ath5k_hw struct */
|
|
|
+ sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
|
|
|
+ if (!sc->ah) {
|
|
|
+ ret = -ENOMEM;
|
|
|
+ ATH5K_ERR(sc, "out of memory\n");
|
|
|
+ goto err_irq;
|
|
|
+ }
|
|
|
|
|
|
- if (sc->opmode == NL80211_IFTYPE_AP)
|
|
|
- return -EOPNOTSUPP;
|
|
|
+ sc->ah->ah_sc = sc;
|
|
|
+ sc->ah->ah_iobase = sc->iobase;
|
|
|
+ common = ath5k_hw_common(sc->ah);
|
|
|
+ common->ops = &ath5k_common_ops;
|
|
|
+ common->ah = sc->ah;
|
|
|
+ common->hw = hw;
|
|
|
+ common->cachelsz = csz << 2; /* convert to bytes */
|
|
|
|
|
|
- switch (key->cipher) {
|
|
|
- case WLAN_CIPHER_SUITE_WEP40:
|
|
|
- case WLAN_CIPHER_SUITE_WEP104:
|
|
|
- case WLAN_CIPHER_SUITE_TKIP:
|
|
|
- break;
|
|
|
- case WLAN_CIPHER_SUITE_CCMP:
|
|
|
- if (sc->ah->ah_aes_support)
|
|
|
- break;
|
|
|
+ /* Initialize device */
|
|
|
+ ret = ath5k_hw_attach(sc);
|
|
|
+ if (ret) {
|
|
|
+ goto err_free_ah;
|
|
|
+ }
|
|
|
|
|
|
- return -EOPNOTSUPP;
|
|
|
- default:
|
|
|
- WARN_ON(1);
|
|
|
- return -EINVAL;
|
|
|
+ /* set up multi-rate retry capabilities */
|
|
|
+ if (sc->ah->ah_version == AR5K_AR5212) {
|
|
|
+ hw->max_rates = 4;
|
|
|
+ hw->max_rate_tries = 11;
|
|
|
}
|
|
|
|
|
|
- mutex_lock(&sc->lock);
|
|
|
+ /* Finish private driver data initialization */
|
|
|
+ ret = ath5k_attach(pdev, hw);
|
|
|
+ if (ret)
|
|
|
+ goto err_ah;
|
|
|
|
|
|
- switch (cmd) {
|
|
|
- case SET_KEY:
|
|
|
- ret = ath5k_hw_set_key(sc->ah, key->keyidx, key,
|
|
|
- sta ? sta->addr : NULL);
|
|
|
- if (ret) {
|
|
|
- ATH5K_ERR(sc, "can't set the key\n");
|
|
|
- goto unlock;
|
|
|
+ ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
|
|
|
+ ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
|
|
|
+ sc->ah->ah_mac_srev,
|
|
|
+ sc->ah->ah_phy_revision);
|
|
|
+
|
|
|
+ if (!sc->ah->ah_single_chip) {
|
|
|
+ /* Single chip radio (!RF5111) */
|
|
|
+ if (sc->ah->ah_radio_5ghz_revision &&
|
|
|
+ !sc->ah->ah_radio_2ghz_revision) {
|
|
|
+ /* No 5GHz support -> report 2GHz radio */
|
|
|
+ if (!test_bit(AR5K_MODE_11A,
|
|
|
+ sc->ah->ah_capabilities.cap_mode)) {
|
|
|
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
|
|
|
+ ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
+ sc->ah->ah_radio_5ghz_revision),
|
|
|
+ sc->ah->ah_radio_5ghz_revision);
|
|
|
+ /* No 2GHz support (5110 and some
|
|
|
+ * 5Ghz only cards) -> report 5Ghz radio */
|
|
|
+ } else if (!test_bit(AR5K_MODE_11B,
|
|
|
+ sc->ah->ah_capabilities.cap_mode)) {
|
|
|
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
|
|
|
+ ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
+ sc->ah->ah_radio_5ghz_revision),
|
|
|
+ sc->ah->ah_radio_5ghz_revision);
|
|
|
+ /* Multiband radio */
|
|
|
+ } else {
|
|
|
+ ATH5K_INFO(sc, "RF%s multiband radio found"
|
|
|
+ " (0x%x)\n",
|
|
|
+ ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
+ sc->ah->ah_radio_5ghz_revision),
|
|
|
+ sc->ah->ah_radio_5ghz_revision);
|
|
|
+ }
|
|
|
+ }
|
|
|
+ /* Multi chip radio (RF5111 - RF2111) ->
|
|
|
+ * report both 2GHz/5GHz radios */
|
|
|
+ else if (sc->ah->ah_radio_5ghz_revision &&
|
|
|
+ sc->ah->ah_radio_2ghz_revision){
|
|
|
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
|
|
|
+ ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
+ sc->ah->ah_radio_5ghz_revision),
|
|
|
+ sc->ah->ah_radio_5ghz_revision);
|
|
|
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
|
|
|
+ ath5k_chip_name(AR5K_VERSION_RAD,
|
|
|
+ sc->ah->ah_radio_2ghz_revision),
|
|
|
+ sc->ah->ah_radio_2ghz_revision);
|
|
|
}
|
|
|
- __set_bit(key->keyidx, common->keymap);
|
|
|
- key->hw_key_idx = key->keyidx;
|
|
|
- key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV |
|
|
|
- IEEE80211_KEY_FLAG_GENERATE_MMIC);
|
|
|
- break;
|
|
|
- case DISABLE_KEY:
|
|
|
- ath5k_hw_reset_key(sc->ah, key->keyidx);
|
|
|
- __clear_bit(key->keyidx, common->keymap);
|
|
|
- break;
|
|
|
- default:
|
|
|
- ret = -EINVAL;
|
|
|
- goto unlock;
|
|
|
}
|
|
|
|
|
|
-unlock:
|
|
|
- mmiowb();
|
|
|
- mutex_unlock(&sc->lock);
|
|
|
- return ret;
|
|
|
-}
|
|
|
-
|
|
|
-static int
|
|
|
-ath5k_get_stats(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_low_level_stats *stats)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
-
|
|
|
- /* Force update */
|
|
|
- ath5k_hw_update_mib_counters(sc->ah);
|
|
|
-
|
|
|
- stats->dot11ACKFailureCount = sc->stats.ack_fail;
|
|
|
- stats->dot11RTSFailureCount = sc->stats.rts_fail;
|
|
|
- stats->dot11RTSSuccessCount = sc->stats.rts_ok;
|
|
|
- stats->dot11FCSErrorCount = sc->stats.fcs_error;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int ath5k_get_survey(struct ieee80211_hw *hw, int idx,
|
|
|
- struct survey_info *survey)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ieee80211_conf *conf = &hw->conf;
|
|
|
-
|
|
|
- if (idx != 0)
|
|
|
- return -ENOENT;
|
|
|
|
|
|
- survey->channel = conf->channel;
|
|
|
- survey->filled = SURVEY_INFO_NOISE_DBM;
|
|
|
- survey->noise = sc->ah->ah_noise_floor;
|
|
|
+ /* ready to process interrupts */
|
|
|
+ __clear_bit(ATH_STAT_INVALID, sc->status);
|
|
|
|
|
|
return 0;
|
|
|
+err_ah:
|
|
|
+ ath5k_hw_detach(sc->ah);
|
|
|
+err_free_ah:
|
|
|
+ kfree(sc->ah);
|
|
|
+err_irq:
|
|
|
+ free_irq(pdev->irq, sc);
|
|
|
+err_free:
|
|
|
+ ieee80211_free_hw(hw);
|
|
|
+err_map:
|
|
|
+ pci_iounmap(pdev, mem);
|
|
|
+err_reg:
|
|
|
+ pci_release_region(pdev, 0);
|
|
|
+err_dis:
|
|
|
+ pci_disable_device(pdev);
|
|
|
+err:
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
-static u64
|
|
|
-ath5k_get_tsf(struct ieee80211_hw *hw)
|
|
|
+static void __devexit
|
|
|
+ath5k_pci_remove(struct pci_dev *pdev)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
+ struct ath5k_softc *sc = pci_get_drvdata(pdev);
|
|
|
|
|
|
- return ath5k_hw_get_tsf64(sc->ah);
|
|
|
+ ath5k_debug_finish_device(sc);
|
|
|
+ ath5k_detach(pdev, sc->hw);
|
|
|
+ ath5k_hw_detach(sc->ah);
|
|
|
+ kfree(sc->ah);
|
|
|
+ free_irq(pdev->irq, sc);
|
|
|
+ pci_iounmap(pdev, sc->iobase);
|
|
|
+ pci_release_region(pdev, 0);
|
|
|
+ pci_disable_device(pdev);
|
|
|
+ ieee80211_free_hw(sc->hw);
|
|
|
}
|
|
|
|
|
|
-static void
|
|
|
-ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
|
|
|
+#ifdef CONFIG_PM_SLEEP
|
|
|
+static int ath5k_pci_suspend(struct device *dev)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
+ struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
|
|
|
|
|
|
- ath5k_hw_set_tsf64(sc->ah, tsf);
|
|
|
+ ath5k_led_off(sc);
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
-static void
|
|
|
-ath5k_reset_tsf(struct ieee80211_hw *hw)
|
|
|
+static int ath5k_pci_resume(struct device *dev)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
+ struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
+ struct ath5k_softc *sc = pci_get_drvdata(pdev);
|
|
|
|
|
|
/*
|
|
|
- * in IBSS mode we need to update the beacon timers too.
|
|
|
- * this will also reset the TSF if we call it with 0
|
|
|
+ * Suspend/Resume resets the PCI configuration space, so we have to
|
|
|
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
|
|
|
+ * PCI Tx retries from interfering with C3 CPU state
|
|
|
*/
|
|
|
- if (sc->opmode == NL80211_IFTYPE_ADHOC)
|
|
|
- ath5k_beacon_update_timers(sc, 0);
|
|
|
- else
|
|
|
- ath5k_hw_reset_tsf(sc->ah);
|
|
|
+ pci_write_config_byte(pdev, 0x41, 0);
|
|
|
+
|
|
|
+ ath5k_led_enable(sc);
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
+static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
|
|
|
+#define ATH5K_PM_OPS (&ath5k_pm_ops)
|
|
|
+#else
|
|
|
+#define ATH5K_PM_OPS NULL
|
|
|
+#endif /* CONFIG_PM_SLEEP */
|
|
|
+
|
|
|
+static struct pci_driver ath5k_pci_driver = {
|
|
|
+ .name = KBUILD_MODNAME,
|
|
|
+ .id_table = ath5k_pci_id_table,
|
|
|
+ .probe = ath5k_pci_probe,
|
|
|
+ .remove = __devexit_p(ath5k_pci_remove),
|
|
|
+ .driver.pm = ATH5K_PM_OPS,
|
|
|
+};
|
|
|
+
|
|
|
/*
|
|
|
- * Updates the beacon that is sent by ath5k_beacon_send. For adhoc,
|
|
|
- * this is called only once at config_bss time, for AP we do it every
|
|
|
- * SWBA interrupt so that the TIM will reflect buffered frames.
|
|
|
- *
|
|
|
- * Called with the beacon lock.
|
|
|
+ * Module init/exit functions
|
|
|
*/
|
|
|
-static int
|
|
|
-ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
|
|
|
+static int __init
|
|
|
+init_ath5k_pci(void)
|
|
|
{
|
|
|
int ret;
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct sk_buff *skb;
|
|
|
-
|
|
|
- if (WARN_ON(!vif)) {
|
|
|
- ret = -EINVAL;
|
|
|
- goto out;
|
|
|
- }
|
|
|
-
|
|
|
- skb = ieee80211_beacon_get(hw, vif);
|
|
|
-
|
|
|
- if (!skb) {
|
|
|
- ret = -ENOMEM;
|
|
|
- goto out;
|
|
|
- }
|
|
|
-
|
|
|
- ath5k_debug_dump_skb(sc, skb, "BC ", 1);
|
|
|
-
|
|
|
- ath5k_txbuf_free_skb(sc, sc->bbuf);
|
|
|
- sc->bbuf->skb = skb;
|
|
|
- ret = ath5k_beacon_setup(sc, sc->bbuf);
|
|
|
- if (ret)
|
|
|
- sc->bbuf->skb = NULL;
|
|
|
-out:
|
|
|
- return ret;
|
|
|
-}
|
|
|
-
|
|
|
-static void
|
|
|
-set_beacon_filter(struct ieee80211_hw *hw, bool enable)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- u32 rfilt;
|
|
|
- rfilt = ath5k_hw_get_rx_filter(ah);
|
|
|
- if (enable)
|
|
|
- rfilt |= AR5K_RX_FILTER_BEACON;
|
|
|
- else
|
|
|
- rfilt &= ~AR5K_RX_FILTER_BEACON;
|
|
|
- ath5k_hw_set_rx_filter(ah, rfilt);
|
|
|
- sc->filter_flags = rfilt;
|
|
|
-}
|
|
|
-
|
|
|
-static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
|
|
|
- struct ieee80211_vif *vif,
|
|
|
- struct ieee80211_bss_conf *bss_conf,
|
|
|
- u32 changes)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- struct ath5k_hw *ah = sc->ah;
|
|
|
- struct ath_common *common = ath5k_hw_common(ah);
|
|
|
- unsigned long flags;
|
|
|
-
|
|
|
- mutex_lock(&sc->lock);
|
|
|
- if (WARN_ON(sc->vif != vif))
|
|
|
- goto unlock;
|
|
|
-
|
|
|
- if (changes & BSS_CHANGED_BSSID) {
|
|
|
- /* Cache for later use during resets */
|
|
|
- memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
|
|
|
- common->curaid = 0;
|
|
|
- ath5k_hw_set_bssid(ah);
|
|
|
- mmiowb();
|
|
|
- }
|
|
|
-
|
|
|
- if (changes & BSS_CHANGED_BEACON_INT)
|
|
|
- sc->bintval = bss_conf->beacon_int;
|
|
|
|
|
|
- if (changes & BSS_CHANGED_ASSOC) {
|
|
|
- sc->assoc = bss_conf->assoc;
|
|
|
- if (sc->opmode == NL80211_IFTYPE_STATION)
|
|
|
- set_beacon_filter(hw, sc->assoc);
|
|
|
- ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
|
|
|
- AR5K_LED_ASSOC : AR5K_LED_INIT);
|
|
|
- if (bss_conf->assoc) {
|
|
|
- ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
|
|
|
- "Bss Info ASSOC %d, bssid: %pM\n",
|
|
|
- bss_conf->aid, common->curbssid);
|
|
|
- common->curaid = bss_conf->aid;
|
|
|
- ath5k_hw_set_bssid(ah);
|
|
|
- /* Once ANI is available you would start it here */
|
|
|
- }
|
|
|
- }
|
|
|
+ ath5k_debug_init();
|
|
|
|
|
|
- if (changes & BSS_CHANGED_BEACON) {
|
|
|
- spin_lock_irqsave(&sc->block, flags);
|
|
|
- ath5k_beacon_update(hw, vif);
|
|
|
- spin_unlock_irqrestore(&sc->block, flags);
|
|
|
+ ret = pci_register_driver(&ath5k_pci_driver);
|
|
|
+ if (ret) {
|
|
|
+ printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
- if (changes & BSS_CHANGED_BEACON_ENABLED)
|
|
|
- sc->enable_beacon = bss_conf->enable_beacon;
|
|
|
-
|
|
|
- if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
|
|
|
- BSS_CHANGED_BEACON_INT))
|
|
|
- ath5k_beacon_config(sc);
|
|
|
-
|
|
|
- unlock:
|
|
|
- mutex_unlock(&sc->lock);
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
-static void ath5k_sw_scan_start(struct ieee80211_hw *hw)
|
|
|
+static void __exit
|
|
|
+exit_ath5k_pci(void)
|
|
|
{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- if (!sc->assoc)
|
|
|
- ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
|
|
|
-}
|
|
|
+ pci_unregister_driver(&ath5k_pci_driver);
|
|
|
|
|
|
-static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
- ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
|
|
|
- AR5K_LED_ASSOC : AR5K_LED_INIT);
|
|
|
+ ath5k_debug_finish();
|
|
|
}
|
|
|
|
|
|
-/**
|
|
|
- * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
|
|
|
- *
|
|
|
- * @hw: struct ieee80211_hw pointer
|
|
|
- * @coverage_class: IEEE 802.11 coverage class number
|
|
|
- *
|
|
|
- * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
|
|
|
- * coverage class. The values are persistent, they are restored after device
|
|
|
- * reset.
|
|
|
- */
|
|
|
-static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
|
|
|
-{
|
|
|
- struct ath5k_softc *sc = hw->priv;
|
|
|
-
|
|
|
- mutex_lock(&sc->lock);
|
|
|
- ath5k_hw_set_coverage_class(sc->ah, coverage_class);
|
|
|
- mutex_unlock(&sc->lock);
|
|
|
-}
|
|
|
+module_init(init_ath5k_pci);
|
|
|
+module_exit(exit_ath5k_pci);
|