media: video: Fix build in saa7164

-tip testing found that the x86 build (64-bit allyesconfig) fails due to:

  LD      vmlinux.o
  drivers/built-in.o:(.bss+0x4b648): multiple definition of `debug'
  arch/x86/built-in.o:(.kprobes.text+0x88): first defined here
  ld: Warning: size of symbol `debug' changed from 90 in
arch/x86/built-in.o to 4 in drivers/built-in.o
 make: *** [vmlinux.o] Error 1

This is because recent saa7164 changes introduced a global symbol
named 'debug'. The x86 platform code already defines a 'debug'
symbol. (which is named in a too generic way as well - but it
can be used nicely to weed out too generic symbols in drivers ;-)

Rename it to saa_debug.

[mchehab@redhat.com: use module_param_named to preserve old name]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/saa7164/saa7164-api.c

@@ -415,7 +415,7 @@ int saa7164_api_enum_subdevs(struct saa7164_dev *dev)
 		goto out;
 	}
 
-	if (debug & DBGLVL_API)
+	if (saa_debug & DBGLVL_API)
 		saa7164_dumphex16(dev, buf, (buflen/16)*16);
 
 	saa7164_api_dump_subdevs(dev, buf, buflen);
@@ -480,7 +480,7 @@ int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
 
 	dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);
 
-	if (debug & DBGLVL_I2C)
+	if (saa_debug & DBGLVL_I2C)
 		saa7164_dumphex16(dev, buf, 2 * 16);
 
 	ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR,
@@ -488,7 +488,7 @@ int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
 	else {
-		if (debug & DBGLVL_I2C)
+		if (saa_debug & DBGLVL_I2C)
 			saa7164_dumphex16(dev, buf, sizeof(buf));
 		memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen);
 	}
@@ -548,7 +548,7 @@ int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen,
 	*((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen;
 	memcpy((buf + 2 * sizeof(u32)), data, datalen);
 
-	if (debug & DBGLVL_I2C)
+	if (saa_debug & DBGLVL_I2C)
 		saa7164_dumphex16(dev, buf, sizeof(buf));
 
 	ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR,

drivers/media/video/saa7164/saa7164-cmd.c

@@ -250,7 +250,7 @@ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
 	unsigned long stamp;
 	int r;
 
-	if (debug >= 4)
+	if (saa_debug >= 4)
 		saa7164_bus_dump(dev);
 
 	dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno);

drivers/media/video/saa7164/saa7164-core.c

@@ -45,8 +45,8 @@ MODULE_LICENSE("GPL");
  32 bus
  */
 
-unsigned int debug;
-module_param(debug, int, 0644);
+unsigned int saa_debug;
+module_param_named(debug, saa_debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");
 
 unsigned int waitsecs = 10;
@@ -653,7 +653,7 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
 		printk(KERN_ERR "%s() Unsupported board detected, "
 			"registering without firmware\n", __func__);
 
-	dprintk(1, "%s() parameter debug = %d\n", __func__, debug);
+	dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
 	dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
 
 fail_fw:

drivers/media/video/saa7164/saa7164.h

@@ -375,9 +375,9 @@ extern int saa7164_buffer_dealloc(struct saa7164_tsport *port,
 
 /* ----------------------------------------------------------- */
 
-extern unsigned int debug;
+extern unsigned int saa_debug;
 #define dprintk(level, fmt, arg...)\
-	do { if (debug & level)\
+	do { if (saa_debug & level)\
 		printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
 	} while (0)