|
@@ -3,23 +3,10 @@
|
|
|
*/
|
|
|
#include <linux/pci.h>
|
|
|
#include <linux/irq.h>
|
|
|
-#include <asm/pci-direct.h>
|
|
|
-#include <asm/genapic.h>
|
|
|
-#include <asm/cpu.h>
|
|
|
|
|
|
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
|
|
|
-static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev)
|
|
|
-{
|
|
|
-#ifdef CONFIG_X86_64
|
|
|
- if (genapic != &apic_flat)
|
|
|
- panic("APIC mode must be flat on this system\n");
|
|
|
-#elif defined(CONFIG_X86_GENERICARCH)
|
|
|
- if (genapic != &apic_default)
|
|
|
- panic("APIC mode must be default(flat) on this system. Use apic=default\n");
|
|
|
-#endif
|
|
|
-}
|
|
|
|
|
|
-void __init quirk_intel_irqbalance(void)
|
|
|
+static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
|
|
|
{
|
|
|
u8 config, rev;
|
|
|
u32 word;
|
|
@@ -29,18 +16,18 @@ void __init quirk_intel_irqbalance(void)
|
|
|
* based platforms.
|
|
|
* Disable SW irqbalance/affinity on those platforms.
|
|
|
*/
|
|
|
- rev = read_pci_config_byte(0, 0, 0, PCI_CLASS_REVISION);
|
|
|
+ pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
|
|
|
if (rev > 0x9)
|
|
|
return;
|
|
|
|
|
|
printk(KERN_INFO "Intel E7520/7320/7525 detected.");
|
|
|
|
|
|
- /* enable access to config space */
|
|
|
- config = read_pci_config_byte(0, 0, 0, 0xf4);
|
|
|
- write_pci_config_byte(0, 0, 0, 0xf4, config|0x2);
|
|
|
+ /* enable access to config space*/
|
|
|
+ pci_read_config_byte(dev, 0xf4, &config);
|
|
|
+ pci_write_config_byte(dev, 0xf4, config|0x2);
|
|
|
|
|
|
/* read xTPR register */
|
|
|
- word = read_pci_config_16(0, 0, 0x40, 0x4c);
|
|
|
+ raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
|
|
|
|
|
|
if (!(word & (1 << 13))) {
|
|
|
printk(KERN_INFO "Disabling irq balancing and affinity\n");
|
|
@@ -50,25 +37,14 @@ void __init quirk_intel_irqbalance(void)
|
|
|
noirqdebug_setup("");
|
|
|
#ifdef CONFIG_PROC_FS
|
|
|
no_irq_affinity = 1;
|
|
|
-#endif
|
|
|
-#ifdef CONFIG_HOTPLUG_CPU
|
|
|
- printk(KERN_INFO "Disabling cpu hotplug control\n");
|
|
|
- enable_cpu_hotplug = 0;
|
|
|
-#endif
|
|
|
-#ifdef CONFIG_X86_64
|
|
|
- /* force the genapic selection to flat mode so that
|
|
|
- * interrupts can be redirected to more than one CPU.
|
|
|
- */
|
|
|
- genapic_force = &apic_flat;
|
|
|
#endif
|
|
|
}
|
|
|
|
|
|
- /* put back the original value for config space */
|
|
|
+ /* put back the original value for config space*/
|
|
|
if (!(config & 0x2))
|
|
|
- write_pci_config_byte(0, 0, 0, 0xf4, config);
|
|
|
+ pci_write_config_byte(dev, 0xf4, config);
|
|
|
}
|
|
|
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, verify_quirk_intel_irqbalance);
|
|
|
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, verify_quirk_intel_irqbalance);
|
|
|
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, verify_quirk_intel_irqbalance);
|
|
|
-
|
|
|
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance);
|
|
|
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance);
|
|
|
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance);
|
|
|
#endif
|