Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanup from Olof Johansson:
 "Here is a collection of cleanup patches.  Among the pieces that stand
  out are:

   - The deletion of h720x platforms
   - Split of at91 non-dt platforms to their own Kconfig file to keep
     them separate
   - General cleanups and refactoring of i.MX and MXS platforms
   - Some restructuring of clock tables for OMAP
   - Convertion of PMC driver for Tegra to dt-only
   - Some renames of sunxi -> sun4i (Allwinner A10)
   - ... plus a bunch of other stuff that I haven't mentioned"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: i.MX: remove unused ARCH_* configs
  ARM i.MX53: remove platform ahci support
  ARM: sunxi: Rework the restart code
  irqchip: sunxi: Rename sunxi to sun4i
  irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro
  clocksource: sunxi: Rename sunxi to sun4i
  clocksource: sunxi: make use of CLKSRC_OF
  clocksource: sunxi: Cleanup the timer code
  ARM: at91: remove trailing semicolon from macros
  ARM: at91/setup: fix trivial typos
  ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"
  ARM: EXYNOS: change the name of USB ohci header
  ARM: SAMSUNG: Remove unnecessary code for dma
  ARM: S3C24XX: Remove unused GPIO drive strength register definitions
  ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410
  ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards
  ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"
  ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"
  ...

Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt → Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt

@@ -2,7 +2,7 @@ Allwinner Sunxi Interrupt Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-ic"
+- compatible : should be "allwinner,sun4i-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -97,7 +97,7 @@ The interrupt sources are as follows:
 Example:
 
 intc: interrupt-controller {
-	compatible = "allwinner,sunxi-ic";
+	compatible = "allwinner,sun4i-ic";
 	reg = <0x01c20400 0x400>;
 	interrupt-controller;
 	#interrupt-cells = <2>;

Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt → Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt

@@ -2,7 +2,7 @@ Allwinner A1X SoCs Timer Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-timer"
+- compatible : should be "allwinner,sun4i-timer"
 - reg : Specifies base physical address and size of the registers.
 - interrupts : The interrupt of the first timer
 - clocks: phandle to the source clock (usually a 24 MHz fixed clock)
@@ -10,7 +10,7 @@ Required properties:
 Example:
 
 timer {
-	compatible = "allwinner,sunxi-timer";
+	compatible = "allwinner,sun4i-timer";
 	reg = <0x01c20c00 0x400>;
 	interrupts = <22>;
 	clocks = <&osc>;

Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt → Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt

@@ -1,13 +1,13 @@
-Allwinner sunXi Watchdog timer
+Allwinner sun4i Watchdog timer
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-wdt"
+- compatible : should be "allwinner,sun4i-wdt"
 - reg : Specifies base physical address and size of the registers.
 
 Example:
 
 wdt: watchdog@01c20c90 {
-	compatible = "allwinner,sunxi-wdt";
+	compatible = "allwinner,sun4i-wdt";
 	reg = <0x01c20c90 0x10>;
 };

arch/arm/Kconfig

@@ -411,6 +411,7 @@ config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_GPIO_H
 	select CPU_FA526
 	help
 	  Support for the Cortina Systems Gemini family SoCs
@@ -474,12 +475,14 @@ config ARCH_MXS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK_PREPARE
 	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select SPARSE_IRQ
+	select STMP_DEVICE
 	select USE_OF
 	help
 	  Support for Freescale MXS-based family of processors
@@ -493,14 +496,6 @@ config ARCH_NETX
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
-config ARCH_H720X
-	bool "Hynix HMS720x-based"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_ARM720T
-	select ISA_DMA_API
-	help
-	  This enables support for systems based on the Hynix HMS720x
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -1054,8 +1049,6 @@ source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
-source "arch/arm/mach-h720x/Kconfig"
-
 source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
@@ -1176,7 +1169,6 @@ config PLAT_VERSATILE
 config ARM_TIMER_SP804
 	bool
 	select CLKSRC_MMIO
-	select HAVE_SCHED_CLOCK
 
 source arch/arm/mm/Kconfig
 
@@ -1606,6 +1598,7 @@ config HAVE_ARM_ARCH_TIMER
 config HAVE_ARM_TWD
 	bool
 	depends on SMP
+	select CLKSRC_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 
@@ -2165,13 +2158,6 @@ menu "CPU Power Management"
 if ARCH_HAS_CPUFREQ
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_MXC && CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
 config CPU_FREQ_S3C
 	bool
 	help

arch/arm/Makefile

@@ -147,7 +147,6 @@ machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
-machine-$(CONFIG_ARCH_H720X)		+= h720x
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
 machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx

arch/arm/boot/dts/imx23.dtsi

@@ -295,6 +295,7 @@
 			};
 
 			digctl@8001c000 {
+				compatible = "fsl,imx23-digctl";
 				reg = <0x8001c000 2000>;
 				status = "disabled";
 			};
@@ -321,6 +322,7 @@
 			};
 
 			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
@@ -360,7 +362,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl";
+				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -426,6 +428,7 @@
 				compatible = "fsl,imx23-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <28 29 30 31>;
+				clocks = <&clks 28>;
 			};
 
 			auart0: serial@8006c000 {

arch/arm/boot/dts/imx28.dtsi

@@ -647,6 +647,7 @@
 			};
 
 			digctl@8001c000 {
+				compatible = "fsl,imx28-digctl";
 				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
@@ -676,6 +677,7 @@
 			};
 
 			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
@@ -755,7 +757,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl";
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -838,6 +840,7 @@
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
 			};
 
 			auart0: serial@8006a000 {

arch/arm/boot/dts/tegra114.dtsi

@@ -99,7 +99,7 @@
 	};
 
 	pmc {
-		compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc";
+		compatible = "nvidia,tegra114-pmc";
 		reg = <0x7000e400 0x400>;
 	};
 

arch/arm/boot/dts/tegra20.dtsi

@@ -145,6 +145,7 @@
 			      0 1 0x04
 			      0 41 0x04
 			      0 42 0x04>;
+		clocks = <&tegra_car 5>;
 	};
 
 	tegra_car: clock {
@@ -304,6 +305,7 @@
 		compatible = "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
 		interrupts = <0 2 0x04>;
+		clocks = <&tegra_car 4>;
 	};
 
 	i2c@7000c000 {

arch/arm/boot/dts/tegra30.dtsi

@@ -148,6 +148,7 @@
 			      0 42 0x04
 			      0 121 0x04
 			      0 122 0x04>;
+		clocks = <&tegra_car 5>;
 	};
 
 	tegra_car: clock {
@@ -291,6 +292,7 @@
 		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
 		interrupts = <0 2 0x04>;
+		clocks = <&tegra_car 4>;
 	};
 
 	i2c@7000c000 {
@@ -423,7 +425,7 @@
 	};
 
 	pmc {
-		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+		compatible = "nvidia,tegra30-pmc";
 		reg = <0x7000e400 0x400>;
 	};
 

arch/arm/configs/at91_dt_defconfig

@@ -20,7 +20,7 @@ CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
 CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
 CONFIG_AEABI=y

arch/arm/configs/at91sam9260_defconfig

@@ -22,7 +22,7 @@ CONFIG_MACH_QIL_A9260=y
 CONFIG_MACH_CPU9260=y
 CONFIG_MACH_FLEXIBITY=y
 CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0

arch/arm/configs/at91sam9g20_defconfig

@@ -22,7 +22,7 @@ CONFIG_MACH_PCONTROL_G20=y
 CONFIG_MACH_GSIA18S=y
 CONFIG_MACH_USB_A9G20=y
 CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y

arch/arm/configs/at91sam9g45_defconfig

@@ -18,7 +18,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y

arch/arm/configs/h7201_defconfig

@@ -1,27 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_H720X=y
-CONFIG_ARCH_H7201=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_EXT2_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_DEBUG_USER=y

arch/arm/configs/h7202_defconfig

@@ -1,47 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_H720X=y
-CONFIG_ARCH_H7202=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,19200"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_H720X=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_EXT2_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y

arch/arm/include/asm/irq.h

@@ -30,6 +30,11 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+extern void (*handle_arch_irq)(struct pt_regs *);
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
+#endif
+
 #endif
 
 #endif

arch/arm/include/asm/mach/irq.h

@@ -20,11 +20,6 @@ struct seq_file;
 extern void init_FIQ(int);
 extern int show_fiq_list(struct seq_file *, int);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-extern void (*handle_arch_irq)(struct pt_regs *);
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-#endif
-
 /*
  * This is for easy migration, but should be changed in the source
  */
@@ -35,35 +30,4 @@ do {							\
 	raw_spin_unlock(&desc->lock);			\
 } while(0)
 
-#ifndef __ASSEMBLY__
-/*
- * Entry/exit functions for chained handlers where the primary IRQ chip
- * may implement either fasteoi or level-trigger flow control.
- */
-static inline void chained_irq_enter(struct irq_chip *chip,
-				     struct irq_desc *desc)
-{
-	/* FastEOI controllers require no action on entry. */
-	if (chip->irq_eoi)
-		return;
-
-	if (chip->irq_mask_ack) {
-		chip->irq_mask_ack(&desc->irq_data);
-	} else {
-		chip->irq_mask(&desc->irq_data);
-		if (chip->irq_ack)
-			chip->irq_ack(&desc->irq_data);
-	}
-}
-
-static inline void chained_irq_exit(struct irq_chip *chip,
-				    struct irq_desc *desc)
-{
-	if (chip->irq_eoi)
-		chip->irq_eoi(&desc->irq_data);
-	else
-		chip->irq_unmask(&desc->irq_data);
-}
-#endif
-
 #endif

arch/arm/include/asm/smp_twd.h

@@ -34,12 +34,4 @@ struct twd_local_timer name __initdata = {	\
 
 int twd_local_timer_register(struct twd_local_timer *);
 
-#ifdef CONFIG_HAVE_ARM_TWD
-void twd_local_timer_of_register(void);
-#else
-static inline void twd_local_timer_of_register(void)
-{
-}
-#endif
-
 #endif

arch/arm/kernel/irq.c

@@ -26,6 +26,7 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/random.h>
 #include <linux/smp.h>
 #include <linux/init.h>
@@ -114,7 +115,10 @@ EXPORT_SYMBOL_GPL(set_irq_flags);
 
 void __init init_IRQ(void)
 {
-	machine_desc->init_irq();
+	if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
+		irqchip_init();
+	else
+		machine_desc->init_irq();
 }
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER

arch/arm/kernel/smp_twd.c

@@ -362,25 +362,13 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt)
 }
 
 #ifdef CONFIG_OF
-const static struct of_device_id twd_of_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-twd-timer",	},
-	{ .compatible = "arm,cortex-a5-twd-timer",	},
-	{ .compatible = "arm,arm11mp-twd-timer",	},
-	{ },
-};
-
-void __init twd_local_timer_of_register(void)
+static void __init twd_local_timer_of_register(struct device_node *np)
 {
-	struct device_node *np;
 	int err;
 
 	if (!is_smp() || !setup_max_cpus)
 		return;
 
-	np = of_find_matching_node(NULL, twd_of_match);
-	if (!np)
-		return;
-
 	twd_ppi = irq_of_parse_and_map(np, 0);
 	if (!twd_ppi) {
 		err = -EINVAL;
@@ -398,4 +386,7 @@ void __init twd_local_timer_of_register(void)
 out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
 }
+CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
 #endif

arch/arm/mach-at91/Kconfig

@@ -1,8 +1,5 @@
 if ARCH_AT91
 
-config HAVE_AT91_DATAFLASH_CARD
-	bool
-
 config HAVE_AT91_DBGU0
 	bool
 
@@ -93,394 +90,13 @@ config SOC_AT91SAM9N12
 	help
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
-choice
-	prompt "Atmel AT91 Processor Devices for non DT boards"
-
-config ARCH_AT91_NONE
-	bool "None"
-
-config ARCH_AT91RM9200
-	bool "AT91RM9200"
-	select SOC_AT91RM9200
-
-config ARCH_AT91SAM9260
-	bool "AT91SAM9260 or AT91SAM9XE"
-	select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-	select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
-	bool "AT91SAM9G10"
-	select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9263
-	bool "AT91SAM9263"
-	select SOC_AT91SAM9263
-
-config ARCH_AT91SAM9RL
-	bool "AT91SAM9RL"
-	select SOC_AT91SAM9RL
-
-config ARCH_AT91SAM9G20
-	bool "AT91SAM9G20"
-	select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9G45
-	bool "AT91SAM9G45"
-	select SOC_AT91SAM9G45
-
-config ARCH_AT91X40
-	bool "AT91x40"
-	depends on !MMU
-	select ARCH_USES_GETTIMEOFFSET
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-
-endchoice
-
 config AT91_PMC_UNIT
 	bool
 	default !ARCH_AT91X40
 
 # ----------------------------------------------------------
 
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
-	bool "Ajeco 1ARM Single Board Computer"
-	help
-	  Select this if you are using Ajeco's 1ARM Single Board Computer.
-	  <http://www.ajeco.fi/>
-
-config ARCH_AT91RM9200DK
-	bool "Atmel AT91RM9200-DK Development board"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91RM9200-DK Development board.
-	  (Discontinued)
-
-config MACH_AT91RM9200EK
-	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
-	bool "Cogent CSB337"
-	help
-	  Select this if you are using Cogent's CSB337 board.
-	  <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
-	bool "Cogent CSB637"
-	help
-	  Select this if you are using Cogent's CSB637 board.
-	  <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
-	bool "Conitec ARM&EVA"
-	help
-	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
-	  <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
-	bool "Embest ATEB9200"
-	help
-	  Select this if you are using Embest's ATEB9200 board.
-	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
-	bool "KwikByte KB920x"
-	help
-	  Select this if you are using KwikByte's KB920x board.
-	  <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
-	bool "picotux 200"
-	help
-	  Select this if you are using a picotux 200.
-	  <http://www.picotux.com/>
-
-config MACH_KAFA
-	bool "Sperry-Sun KAFA board"
-	help
-	  Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
-	bool "emQbit ECB_AT91 SBC"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using emQbit's ECB_AT91 board.
-	  <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
-	bool "ucDragon YL-9200"
-	help
-	  Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
-	bool "Eukrea CPUAT91"
-	help
-	  Select this if you are using the Eukrea Electromatique's
-	  CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
-	bool "eco920"
-	help
-	  Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
-	bool "RSI Embedded Webserver"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using RSIs EWS board.
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
-	bool "KwikByte KB9260 (CAM60) board"
-	help
-	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
-	  <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
-	bool "Olimex SAM9-L9260 board"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
-	  <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
-	bool "Custom afeb9260 board v1"
-	help
-	  Select this if you are using custom afeb9260 board based on
-	  open hardware design. Select this for revision 1 of the board.
-	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
-	  <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_USB_A9260
-	bool "CALAO USB-A9260"
-	help
-	  Select this if you are using a Calao Systems USB-A9260.
-	  <http://www.calao-systems.com>
-
-config MACH_QIL_A9260
-	bool "CALAO QIL-A9260 board"
-	help
-	  Select this if you are using a Calao Systems QIL-A9260 Board.
-	  <http://www.calao-systems.com>
-
-config MACH_CPU9260
-	bool "Eukrea CPU9260 board"
-	help
-	  Select this if you are using a Eukrea Electromatique's
-	  CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
-	bool "Flexibity Connect board"
-	help
-	  Select this if you are using Flexibity Connect board
-	  <http://www.flexibity.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
-	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
-	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
-	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
-	bool "CALAO USB-A9263"
-	help
-	  Select this if you are using a Calao Systems USB-A9263.
-	  <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
-	  that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
-	depends on MACH_AT91SAM9G20EK
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	help
-	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
-	  onwards.
-	  <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
-	bool "Eukrea CPU9G20 board"
-	help
-	  Select this if you are using a Eukrea Electromatique's
-	  CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_ACMENETUSFOXG20
-	bool "Acme Systems srl FOX Board G20"
-	help
-	  Select this if you are using Acme Systems
-	  FOX Board G20 <http://www.acmesystems.it>
-
-config MACH_PORTUXG20
-	bool "taskit PortuxG20"
-	help
-	  Select this if you are using taskit's PortuxG20.
-	  <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
-	bool "taskit Stamp9G20 CPU module"
-	help
-	  Select this if you are using taskit's Stamp9G20 CPU module on its
-	  evaluation board.
-	  <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
-	bool "PControl G20 CPU module"
-	help
-	  Select this if you are using taskit's Stamp9G20 CPU module on this
-	  carrier board, beeing the decentralized unit of a building automation
-	  system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
-	bool "GS_IA18_S board"
-	help
-	  This enables support for the GS_IA18_S board
-	  produced by GeoSIG Ltd company. This is an internet accelerograph.
-	  <http://www.geosig.com>
-
-config MACH_USB_A9G20
-	bool "CALAO USB-A9G20"
-	depends on ARCH_AT91SAM9G20
-	help
-	  Select this if you are using a Calao Systems USB-A9G20.
-	  <http://www.calao-systems.com>
-
-endif
-
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
-
-config MACH_SNAPPER_9260
-        bool "Bluewater Systems Snapper 9260/9G20 module"
-        help
-          Select this if you are using the Bluewater Systems Snapper 9260 or
-          Snapper 9G20 modules.
-          <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
-	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
-	help
-	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
-	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
-	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
-	bool "Atmel AT91EB01 Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
-	  It is also a popular target for simulators such as GDB's
-	  ARM simulator (commonly known as the ARMulator) and the
-	  Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
+source arch/arm/mach-at91/Kconfig.non_dt
 
 comment "Generic Board Type"
 
@@ -492,7 +108,7 @@ config MACH_AT91RM9200_DT
 	  Select this if you want to experiment device-tree with
 	  an Atmel RM9200 Evaluation Kit.
 
-config MACH_AT91SAM_DT
+config MACH_AT91SAM9_DT
 	bool "Atmel AT91SAM Evaluation Kits with device-tree support"
 	depends on SOC_AT91SAM9
 	select USE_OF
@@ -502,16 +118,6 @@ config MACH_AT91SAM_DT
 
 # ----------------------------------------------------------
 
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
-	bool "Enable DataFlash Card support"
-	depends on HAVE_AT91_DATAFLASH_CARD
-	help
-	  Enable support for the DataFlash card.
-
-# ----------------------------------------------------------
-
 comment "AT91 Feature Selections"
 
 config AT91_PROGRAMMABLE_CLOCKS

arch/arm/mach-at91/Kconfig.non_dt

@@ -0,0 +1,399 @@
+menu "Atmel Non-DT world"
+
+config HAVE_AT91_DATAFLASH_CARD
+	bool
+
+choice
+	prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+	bool "None"
+
+config ARCH_AT91RM9200
+	bool "AT91RM9200"
+	select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+	bool "AT91SAM9260 or AT91SAM9XE"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+	select SOC_AT91SAM9263
+
+config ARCH_AT91SAM9RL
+	bool "AT91SAM9RL"
+	select SOC_AT91SAM9RL
+
+config ARCH_AT91SAM9G20
+	bool "AT91SAM9G20"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9G45
+	bool "AT91SAM9G45"
+	select SOC_AT91SAM9G45
+
+config ARCH_AT91X40
+	bool "AT91x40"
+	depends on !MMU
+	select ARCH_USES_GETTIMEOFFSET
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
+
+comment "AT91RM9200 Board Type"
+
+config MACH_ONEARM
+	bool "Ajeco 1ARM Single Board Computer"
+	help
+	  Select this if you are using Ajeco's 1ARM Single Board Computer.
+	  <http://www.ajeco.fi/>
+
+config ARCH_AT91RM9200DK
+	bool "Atmel AT91RM9200-DK Development board"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91RM9200-DK Development board.
+	  (Discontinued)
+
+config MACH_AT91RM9200EK
+	bool "Atmel AT91RM9200-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+
+config MACH_CSB337
+	bool "Cogent CSB337"
+	help
+	  Select this if you are using Cogent's CSB337 board.
+	  <http://www.cogcomp.com/csb_csb337.htm>
+
+config MACH_CSB637
+	bool "Cogent CSB637"
+	help
+	  Select this if you are using Cogent's CSB637 board.
+	  <http://www.cogcomp.com/csb_csb637.htm>
+
+config MACH_CARMEVA
+	bool "Conitec ARM&EVA"
+	help
+	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
+	  <http://www.conitec.net/english/linuxboard.php>
+
+config MACH_ATEB9200
+	bool "Embest ATEB9200"
+	help
+	  Select this if you are using Embest's ATEB9200 board.
+	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+	bool "KwikByte KB920x"
+	help
+	  Select this if you are using KwikByte's KB920x board.
+	  <http://www.kwikbyte.com/KB9202.html>
+
+config MACH_PICOTUX2XX
+	bool "picotux 200"
+	help
+	  Select this if you are using a picotux 200.
+	  <http://www.picotux.com/>
+
+config MACH_KAFA
+	bool "Sperry-Sun KAFA board"
+	help
+	  Select this if you are using Sperry-Sun's KAFA board.
+
+config MACH_ECBAT91
+	bool "emQbit ECB_AT91 SBC"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using emQbit's ECB_AT91 board.
+	  <http://wiki.emqbit.com/free-ecb-at91>
+
+config MACH_YL9200
+	bool "ucDragon YL-9200"
+	help
+	  Select this if you are using the ucDragon YL-9200 board.
+
+config MACH_CPUAT91
+	bool "Eukrea CPUAT91"
+	help
+	  Select this if you are using the Eukrea Electromatique's
+	  CPUAT91 board <http://www.eukrea.com/>.
+
+config MACH_ECO920
+	bool "eco920"
+	help
+	  Select this if you are using the eco920 board
+
+config MACH_RSI_EWS
+	bool "RSI Embedded Webserver"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using RSIs EWS board.
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Variants"
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
+
+config MACH_AT91SAM9260EK
+	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+config MACH_CAM60
+	bool "KwikByte KB9260 (CAM60) board"
+	help
+	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+	  <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+	bool "Olimex SAM9-L9260 board"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+	  <http://www.olimex.com/dev/sam9-L9260.html>
+
+config MACH_AFEB9260
+	bool "Custom afeb9260 board v1"
+	help
+	  Select this if you are using custom afeb9260 board based on
+	  open hardware design. Select this for revision 1 of the board.
+	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
+	  <http://groups.google.com/group/arm9fpga-evolution-board>
+
+config MACH_USB_A9260
+	bool "CALAO USB-A9260"
+	help
+	  Select this if you are using a Calao Systems USB-A9260.
+	  <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+	bool "CALAO QIL-A9260 board"
+	help
+	  Select this if you are using a Calao Systems QIL-A9260 Board.
+	  <http://www.calao-systems.com>
+
+config MACH_CPU9260
+	bool "Eukrea CPU9260 board"
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9260 Board <http://www.eukrea.com/>
+
+config MACH_FLEXIBITY
+	bool "Flexibity Connect board"
+	help
+	  Select this if you are using Flexibity Connect board
+	  <http://www.flexibity.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+	bool "CALAO USB-A9263"
+	help
+	  Select this if you are using a Calao Systems USB-A9263.
+	  <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+	  that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+	depends on MACH_AT91SAM9G20EK
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+	  onwards.
+	  <http://www.atmel.com/tools/SAM9G20-EK.aspx>
+
+config MACH_CPU9G20
+	bool "Eukrea CPU9G20 board"
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9G20 Board <http://www.eukrea.com/>
+
+config MACH_ACMENETUSFOXG20
+	bool "Acme Systems srl FOX Board G20"
+	help
+	  Select this if you are using Acme Systems
+	  FOX Board G20 <http://www.acmesystems.it>
+
+config MACH_PORTUXG20
+	bool "taskit PortuxG20"
+	help
+	  Select this if you are using taskit's PortuxG20.
+	  <http://www.taskit.de/en/>
+
+config MACH_STAMP9G20
+	bool "taskit Stamp9G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on its
+	  evaluation board.
+	  <http://www.taskit.de/en/>
+
+config MACH_PCONTROL_G20
+	bool "PControl G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on this
+	  carrier board, beeing the decentralized unit of a building automation
+	  system; featuring nvram, eth-switch, iso-rs485, display, io
+
+config MACH_GSIA18S
+	bool "GS_IA18_S board"
+	help
+	  This enables support for the GS_IA18_S board
+	  produced by GeoSIG Ltd company. This is an internet accelerograph.
+	  <http://www.geosig.com>
+
+config MACH_USB_A9G20
+	bool "CALAO USB-A9G20"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Calao Systems USB-A9G20.
+	  <http://www.calao-systems.com>
+
+endif
+
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+        bool "Bluewater Systems Snapper 9260/9G20 module"
+        help
+          Select this if you are using the Bluewater Systems Snapper 9260 or
+          Snapper 9G20 modules.
+          <http://www.bluewatersys.com/>
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9M10G45EK
+	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
+	help
+	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91X40
+
+comment "AT91X40 Board Type"
+
+config MACH_AT91EB01
+	bool "Atmel AT91EB01 Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
+	  It is also a popular target for simulators such as GDB's
+	  ARM simulator (commonly known as the ARMulator) and the
+	  Skyeye simulator.
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+	bool "Enable DataFlash Card support"
+	depends on HAVE_AT91_DATAFLASH_CARD
+	help
+	  Enable support for the DataFlash card.
+
+endmenu

arch/arm/mach-at91/Makefile

@@ -87,8 +87,8 @@ obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
 obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 
 # AT91SAM board with device-tree
-obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
-obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
+obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
 
 # AT91X40 board-specific support
 obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o

arch/arm/mach-at91/at91_rstc.h

@@ -23,7 +23,7 @@ extern void __iomem *at91_rstc_base;
 	__raw_readl(at91_rstc_base + field)
 
 #define at91_rstc_write(field, value) \
-	__raw_writel(value, at91_rstc_base + field);
+	__raw_writel(value, at91_rstc_base + field)
 #else
 .extern at91_rstc_base
 #endif

arch/arm/mach-at91/at91_shdwc.h

@@ -23,7 +23,7 @@ extern void __iomem *at91_shdwc_base;
 	__raw_readl(at91_shdwc_base + field)
 
 #define at91_shdwc_write(field, value) \
-	__raw_writel(value, at91_shdwc_base + field);
+	__raw_writel(value, at91_shdwc_base + field)
 #endif
 
 #define AT91_SHDW_CR		0x00			/* Shut Down Control Register */

arch/arm/mach-at91/at91x40_time.c

@@ -33,7 +33,7 @@
 	__raw_readl(AT91_IO_P2V(AT91_TC) + field)
 
 #define at91_tc_write(field, value) \
-	__raw_writel(value, AT91_IO_P2V(AT91_TC) + field);
+	__raw_writel(value, AT91_IO_P2V(AT91_TC) + field)
 
 /*
  *	3 counter/timer units present.

arch/arm/mach-at91/gpio.c

@@ -22,10 +22,9 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/of_address.h>
 
-#include <asm/mach/irq.h>
-
 #include <mach/hardware.h>
 #include <mach/at91_pio.h>
 

arch/arm/mach-at91/include/mach/at91_dbgu.h

@@ -16,9 +16,6 @@
 #ifndef AT91_DBGU_H
 #define AT91_DBGU_H
 
-#define dbgu_readl(dbgu, field) \
-	__raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field)
-
 #if !defined(CONFIG_ARCH_AT91X40)
 #define AT91_DBGU_CR		(0x00)	/* Control Register */
 #define AT91_DBGU_MR		(0x04)	/* Mode Register */

arch/arm/mach-at91/include/mach/at91_matrix.h

@@ -14,7 +14,7 @@ extern void __iomem *at91_matrix_base;
 	__raw_readl(at91_matrix_base + field)
 
 #define at91_matrix_write(field, value) \
-	__raw_writel(value, at91_matrix_base + field);
+	__raw_writel(value, at91_matrix_base + field)
 
 #else
 .extern at91_matrix_base

arch/arm/mach-at91/include/mach/at91_st.h

@@ -23,7 +23,7 @@ extern void __iomem *at91_st_base;
 	__raw_readl(at91_st_base + field)
 
 #define at91_st_write(field, value) \
-	__raw_writel(value, at91_st_base + field);
+	__raw_writel(value, at91_st_base + field)
 #else
 .extern at91_st_base
 #endif

arch/arm/mach-at91/setup.c

@@ -333,7 +333,7 @@ static void at91_dt_rstc(void)
 
 	of_id = of_match_node(rstc_ids, np);
 	if (!of_id)
-		panic("AT91: rtsc no restart function availlable\n");
+		panic("AT91: rtsc no restart function available\n");
 
 	arm_pm_restart = of_id->data;
 
@@ -353,7 +353,7 @@ static void at91_dt_ramc(void)
 
 	np = of_find_matching_node(NULL, ramc_ids);
 	if (!np)
-		panic("unable to find compatible ram conroller node in dtb\n");
+		panic("unable to find compatible ram controller node in dtb\n");
 
 	at91_ramc_base[0] = of_iomap(np, 0);
 	if (!at91_ramc_base[0])
@@ -403,7 +403,7 @@ static void at91_dt_shdwc(void)
 
 	np = of_find_matching_node(NULL, shdwc_ids);
 	if (!np) {
-		pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n");
+		pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n");
 		return;
 	}
 
@@ -419,7 +419,7 @@ static void at91_dt_shdwc(void)
 
 	if (!of_property_read_u32(np, "atmel,wakeup-counter", &reg)) {
 		if (reg > AT91_SHDW_CPTWK0_MAX) {
-			pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n",
+			pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n",
 				reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
 			reg = AT91_SHDW_CPTWK0_MAX;
 		}

arch/arm/mach-exynos/Kconfig

@@ -97,11 +97,6 @@ config EXYNOS4_DEV_AHCI
 	help
 	  Compile in platform device definitions for AHCI
 
-config EXYNOS_DEV_DRM
-	bool
-	help
-	  Compile in platform device definitions for core DRM device
-
 config EXYNOS4_SETUP_FIMD0
 	bool
 	help
@@ -201,7 +196,6 @@ config MACH_SMDKV310
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
 	select S3C24XX_PWM
 	select S3C_DEV_HSMMC
@@ -255,9 +249,7 @@ config MACH_UNIVERSAL_C210
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
-	select HAVE_SCHED_CLOCK
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -296,7 +288,6 @@ config MACH_NURI
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -332,7 +323,6 @@ config MACH_ORIGEN
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
 	select S3C24XX_PWM
 	select S3C_DEV_HSMMC
@@ -368,7 +358,6 @@ config MACH_SMDK4212
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
 	select S3C24XX_PWM
 	select S3C_DEV_HSMMC2
@@ -409,7 +398,7 @@ config MACH_EXYNOS4_DT
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
 	select CPU_EXYNOS4210
-	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
 	select PINCTRL
 	select PINCTRL_EXYNOS
 	select USE_OF

arch/arm/mach-exynos/common.c

@@ -23,9 +23,9 @@
 #include <linux/of_irq.h>
 #include <linux/export.h>
 #include <linux/irqdomain.h>
-#include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/irqchip/chained_irq.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>

arch/arm/mach-exynos/dev-ohci.c

@@ -12,7 +12,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/platform_data/usb-exynos.h>
+#include <linux/platform_data/usb-ohci-exynos.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>

arch/arm/mach-exynos/mach-origen.c

@@ -26,7 +26,7 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/s3c-hsotg.h>
 #include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-exynos.h>
+#include <linux/platform_data/usb-ohci-exynos.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>

arch/arm/mach-exynos/mach-smdkv310.c

@@ -23,7 +23,7 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/s3c-hsotg.h>
 #include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-exynos.h>
+#include <linux/platform_data/usb-ohci-exynos.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>

arch/arm/mach-exynos/platsmp.c

@@ -20,7 +20,6 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -75,13 +74,6 @@ static DEFINE_SPINLOCK(boot_lock);
 
 static void __cpuinit exynos_secondary_init(unsigned int cpu)
 {
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point

arch/arm/mach-gemini/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= irq.o mm.o time.o devices.o gpio.o idle.o
+obj-y			:= irq.o mm.o time.o devices.o gpio.o idle.o reset.o
 
 # Board-specific support
 obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o

arch/arm/mach-gemini/board-nas4220b.c

@@ -103,4 +103,5 @@ MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
 	.init_irq	= gemini_init_irq,
 	.init_time	= gemini_timer_init,
 	.init_machine	= ib4220b_init,
+	.restart	= gemini_restart,
 MACHINE_END

arch/arm/mach-gemini/board-rut1xx.c

@@ -14,6 +14,7 @@
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/sizes.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -87,4 +88,5 @@ MACHINE_START(RUT100, "Teltonika RUT100")
 	.init_irq	= gemini_init_irq,
 	.init_time	= gemini_timer_init,
 	.init_machine	= rut1xx_init,
+	.restart	= gemini_restart,
 MACHINE_END

arch/arm/mach-gemini/board-wbd111.c

@@ -130,4 +130,5 @@ MACHINE_START(WBD111, "Wiliboard WBD-111")
 	.init_irq	= gemini_init_irq,
 	.init_time	= gemini_timer_init,
 	.init_machine	= wbd111_init,
+	.restart	= gemini_restart,
 MACHINE_END

arch/arm/mach-gemini/board-wbd222.c

@@ -130,4 +130,5 @@ MACHINE_START(WBD222, "Wiliboard WBD-222")
 	.init_irq	= gemini_init_irq,
 	.init_time	= gemini_timer_init,
 	.init_machine	= wbd222_init,
+	.restart	= gemini_restart,
 MACHINE_END

arch/arm/mach-gemini/common.h

@@ -26,4 +26,6 @@ extern int platform_register_pflash(unsigned int size,
 				    struct mtd_partition *parts,
 				    unsigned int nr_parts);
 
+extern void gemini_restart(char mode, const char *cmd);
+
 #endif /* __GEMINI_COMMON_H__ */

arch/arm/mach-gemini/gpio.c

@@ -21,6 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/gpio.h>
 
 #define GPIO_BASE(x)		IO_ADDRESS(GEMINI_GPIO_BASE(x))
 
@@ -44,7 +45,7 @@
 
 #define GPIO_PORT_NUM		3
 
-static void _set_gpio_irqenable(unsigned int base, unsigned int index,
+static void _set_gpio_irqenable(void __iomem *base, unsigned int index,
 				int enable)
 {
 	unsigned int reg;
@@ -57,7 +58,7 @@ static void _set_gpio_irqenable(unsigned int base, unsigned int index,
 static void gpio_ack_irq(struct irq_data *d)
 {
 	unsigned int gpio = irq_to_gpio(d->irq);
-	unsigned int base = GPIO_BASE(gpio / 32);
+	void __iomem *base = GPIO_BASE(gpio / 32);
 
 	__raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
 }
@@ -65,7 +66,7 @@ static void gpio_ack_irq(struct irq_data *d)
 static void gpio_mask_irq(struct irq_data *d)
 {
 	unsigned int gpio = irq_to_gpio(d->irq);
-	unsigned int base = GPIO_BASE(gpio / 32);
+	void __iomem *base = GPIO_BASE(gpio / 32);
 
 	_set_gpio_irqenable(base, gpio % 32, 0);
 }
@@ -73,7 +74,7 @@ static void gpio_mask_irq(struct irq_data *d)
 static void gpio_unmask_irq(struct irq_data *d)
 {
 	unsigned int gpio = irq_to_gpio(d->irq);
-	unsigned int base = GPIO_BASE(gpio / 32);
+	void __iomem *base = GPIO_BASE(gpio / 32);
 
 	_set_gpio_irqenable(base, gpio % 32, 1);
 }
@@ -82,7 +83,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
 {
 	unsigned int gpio = irq_to_gpio(d->irq);
 	unsigned int gpio_mask = 1 << (gpio % 32);
-	unsigned int base = GPIO_BASE(gpio / 32);
+	void __iomem *base = GPIO_BASE(gpio / 32);
 	unsigned int reg_both, reg_level, reg_type;
 
 	reg_type = __raw_readl(base + GPIO_INT_TYPE);
@@ -120,7 +121,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
 	__raw_writel(reg_level, base + GPIO_INT_LEVEL);
 	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
 
-	gpio_ack_irq(d->irq);
+	gpio_ack_irq(d);
 
 	return 0;
 }
@@ -153,7 +154,7 @@ static struct irq_chip gpio_irq_chip = {
 static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
 				int dir)
 {
-	unsigned int base = GPIO_BASE(offset / 32);
+	void __iomem *base = GPIO_BASE(offset / 32);
 	unsigned int reg;
 
 	reg = __raw_readl(base + GPIO_DIR);
@@ -166,7 +167,7 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
 
 static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	unsigned int base = GPIO_BASE(offset / 32);
+	void __iomem *base = GPIO_BASE(offset / 32);
 
 	if (value)
 		__raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
@@ -176,7 +177,7 @@ static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	unsigned int base = GPIO_BASE(offset / 32);
+	void __iomem *base = GPIO_BASE(offset / 32);
 
 	return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
 }

arch/arm/mach-gemini/include/mach/hardware.h

@@ -69,6 +69,6 @@
 /*
  * macro to get at IO space when running virtually
  */
-#define IO_ADDRESS(x)	((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
+#define IO_ADDRESS(x)	IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
 
 #endif

arch/arm/mach-gemini/irq.c

@@ -67,8 +67,8 @@ static struct irq_chip gemini_irq_chip = {
 
 static struct resource irq_resource = {
 	.name	= "irq_handler",
-	.start	= IO_ADDRESS(GEMINI_INTERRUPT_BASE),
-	.end	= IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4,
+	.start	= GEMINI_INTERRUPT_BASE,
+	.end	= FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4,
 };
 
 void __init gemini_init_irq(void)

arch/arm/mach-gemini/mm.c

@@ -19,57 +19,57 @@
 /* Page table mapping for I/O region */
 static struct map_desc gemini_io_desc[] __initdata = {
 	{
-		.virtual	= IO_ADDRESS(GEMINI_GLOBAL_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE),
 		.pfn		=__phys_to_pfn(GEMINI_GLOBAL_BASE),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_UART_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_UART_BASE),
 		.pfn		= __phys_to_pfn(GEMINI_UART_BASE),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_TIMER_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE),
 		.pfn		= __phys_to_pfn(GEMINI_TIMER_BASE),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_INTERRUPT_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE),
 		.pfn		= __phys_to_pfn(GEMINI_INTERRUPT_BASE),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
 		.pfn		= __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(0)),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)),
 		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(0)),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(1)),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)),
 		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(1)),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(2)),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)),
 		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(2)),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
 		.pfn		= __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
 		.pfn		= __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
 		.pfn		= __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
 		.length		= SZ_512K,
 		.type 		= MT_DEVICE,

arch/arm/mach-gemini/include/mach/system.h → arch/arm/mach-gemini/reset.c

@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/global_reg.h>
 
-static inline void arch_reset(char mode, const char *cmd)
+void gemini_restart(char mode, const char *cmd)
 {
 	__raw_writel(RESET_GLOBAL | RESET_CPU1,
 		     IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);

arch/arm/mach-h720x/Kconfig

@@ -1,40 +0,0 @@
-if ARCH_H720X
-
-menu "h720x Implementations"
-
-config ARCH_H7201
-	bool "gms30c7201"
-	depends on ARCH_H720X
-	select CPU_H7201
-	select ZONE_DMA
-	help
-	  Say Y here if you are using the Hynix GMS30C7201 Reference Board
-
-config ARCH_H7202
-	bool "hms30c7202"
-	depends on ARCH_H720X
-	select CPU_H7202
-	select ZONE_DMA
-	help
-	  Say Y here if you are using the Hynix HMS30C7202 Reference Board
-
-endmenu
-
-config CPU_H7201
-	bool
-	help
-	  Select code specific to h7201 variants
-
-config CPU_H7202
-	bool
-	help
-	  Select code specific to h7202 variants
-config H7202_SERIAL23
-	depends on CPU_H7202
-	bool "Use serial ports 2+3"
-	help
-	  Say Y here if you wish to use serial ports 2+3. They share their
-	  pins with the keyboard matrix controller, so you have to decide.
-
-
-endif

arch/arm/mach-h720x/Makefile

@@ -1,16 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := common.o
-obj-m :=
-obj-n :=
-obj-  :=
-
-# Specific board support
-
-obj-$(CONFIG_ARCH_H7201)		+= h7201-eval.o
-obj-$(CONFIG_ARCH_H7202)		+= h7202-eval.o
-obj-$(CONFIG_CPU_H7201) 		+= cpu-h7201.o
-obj-$(CONFIG_CPU_H7202) 		+= cpu-h7202.o

arch/arm/mach-h720x/Makefile.boot

@@ -1,2 +0,0 @@
-   zreladdr-$(CONFIG_ARCH_H720X)	+= 0x40008000
-

arch/arm/mach-h720x/common.c

@@ -1,268 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/common.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * common stuff for Hynix h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/mman.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/dma.h>
-
-#if 0
-#define IRQDBG(args...) printk(args)
-#else
-#define IRQDBG(args...) do {} while(0)
-#endif
-
-void __init arch_dma_init(dma_t *dma)
-{
-}
-
-/*
- * Return nsecs since last timer reload
- * (timercount * (usecs perjiffie)) / (ticks per jiffie)
- */
-u32 h720x_gettimeoffset(void)
-{
-	return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000;
-}
-
-/*
- * mask Global irq's
- */
-static void mask_global_irq(struct irq_data *d)
-{
-	CPU_REG (IRQC_VIRT, IRQC_IER) &= ~(1 << d->irq);
-}
-
-/*
- * unmask Global irq's
- */
-static void unmask_global_irq(struct irq_data *d)
-{
-	CPU_REG (IRQC_VIRT, IRQC_IER) |= (1 << d->irq);
-}
-
-
-/*
- * ack GPIO irq's
- * Ack only for edge triggered int's valid
- */
-static void inline ack_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	if ( (CPU_REG (reg_base, GPIO_EDGE) & bit))
-		CPU_REG (reg_base, GPIO_CLR) = bit;
-}
-
-/*
- * mask GPIO irq's
- */
-static void inline mask_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	CPU_REG (reg_base, GPIO_MASK) &= ~bit;
-}
-
-/*
- * unmask GPIO irq's
- */
-static void inline unmask_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	CPU_REG (reg_base, GPIO_MASK) |= bit;
-}
-
-static void
-h720x_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-	IRQDBG("%s irq: %d\n", __func__, irq);
-	while (mask) {
-		if (mask & 1) {
-			IRQDBG("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		mask >>= 1;
-	}
-}
-
-static void
-h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOA(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-	mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOB(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOC(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOD(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-#ifdef CONFIG_CPU_H7202
-static void
-h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOE(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-#endif
-
-static struct irq_chip h720x_global_chip = {
-	.irq_ack = mask_global_irq,
-	.irq_mask = mask_global_irq,
-	.irq_unmask = unmask_global_irq,
-};
-
-static struct irq_chip h720x_gpio_chip = {
-	.irq_ack = ack_gpio_irq,
-	.irq_mask = mask_gpio_irq,
-	.irq_unmask = unmask_gpio_irq,
-};
-
-/*
- * Initialize IRQ's, mask all, enable multiplexed irq's
- */
-void __init h720x_init_irq (void)
-{
-	int 	irq;
-
-	/* Mask global irq's */
-	CPU_REG (IRQC_VIRT, IRQC_IER) = 0x0;
-
-	/* Mask all multiplexed irq's */
-	CPU_REG (GPIO_A_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_B_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_C_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_D_VIRT, GPIO_MASK) = 0x0;
-
-	/* Initialize global IRQ's, fast path */
-	for (irq = 0; irq < NR_GLBL_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &h720x_global_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* Initialize multiplexed IRQ's, slow path */
-	for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) {
-		irq_set_chip_and_handler(irq, &h720x_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler);
-
-#ifdef CONFIG_CPU_H7202
-	for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) {
-		irq_set_chip_and_handler(irq, &h720x_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler);
-#endif
-
-	/* Enable multiplexed irq's */
-	CPU_REG (IRQC_VIRT, IRQC_IER) = IRQ_ENA_MUX;
-}
-
-static struct map_desc h720x_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Initialize io tables */
-void __init h720x_map_io(void)
-{
-	iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc));
-}
-
-void h720x_restart(char mode, const char *cmd)
-{
-	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
-static void h720x__idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-static int __init h720x_idle_init(void)
-{
-	arm_pm_idle = h720x__idle;
-	return 0;
-}
-
-arch_initcall(h720x_idle_init);

arch/arm/mach-h720x/common.h

@@ -1,30 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/common.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix GMS30C7201 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-extern u32 h720x_gettimeoffset(void);
-extern void __init h720x_init_irq(void);
-extern void __init h720x_map_io(void);
-extern void h720x_restart(char, const char *);
-
-#ifdef CONFIG_ARCH_H7202
-extern void h7202_timer_init(void);
-extern void __init init_hw_h7202(void);
-extern void __init h7202_init_irq(void);
-extern void __init h7202_init_time(void);
-#endif
-
-#ifdef CONFIG_ARCH_H7201
-extern void h7201_timer_init(void);
-#endif

arch/arm/mach-h720x/cpu-h7201.c

@@ -1,57 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/cpu-h7201.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * processor specific stuff for the Hynix h7201
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include "common.h"
-/*
- * Timer interrupt handler
- */
-static irqreturn_t
-h7201_timer_interrupt(int irq, void *dev_id)
-{
-	CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction h7201_timer_irq = {
-	.name		= "h7201 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= h7201_timer_interrupt,
-};
-
-/*
- * Setup TIMER0 as system timer
- */
-void __init h7201_timer_init(void)
-{
-	arch_gettimeoffset = h720x_gettimeoffset;
-
-	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
-
-	setup_irq(IRQ_TIMER0, &h7201_timer_irq);
-}

arch/arm/mach-h720x/cpu-h7202.c

@@ -1,225 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/cpu-h7202.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * processor specific stuff for the Hynix h7202
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include "common.h"
-
-static struct resource h7202ps2_resources[] = {
-	[0] = {
-		.start	= 0x8002c000,
-		.end	= 0x8002c040,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PS2,
-		.end	= IRQ_PS2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device h7202ps2_device = {
-	.name		= "h7202ps2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(h7202ps2_resources),
-	.resource	= h7202ps2_resources,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= (void*)SERIAL0_VIRT,
-		.mapbase	= SERIAL0_BASE,
-		.irq		= IRQ_UART0,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.membase	= (void*)SERIAL1_VIRT,
-		.mapbase	= SERIAL1_BASE,
-		.irq		= IRQ_UART1,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-#ifdef CONFIG_H7202_SERIAL23
-	{
-		.membase	= (void*)SERIAL2_VIRT,
-		.mapbase	= SERIAL2_BASE,
-		.irq		= IRQ_UART2,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.membase	= (void*)SERIAL3_VIRT,
-		.mapbase	= SERIAL3_BASE,
-		.irq		= IRQ_UART3,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&h7202ps2_device,
-	&serial_device,
-};
-
-/* Although we have two interrupt lines for the timers, we only have one
- * status register which clears all pending timer interrupts on reading. So
- * we have to handle all timer interrupts in one place.
- */
-static void
-h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
-
-	if ( mask & TSTAT_T0INT ) {
-		timer_tick();
-		if( mask == TSTAT_T0INT )
-			return;
-	}
-
-	mask >>= 1;
-	irq = IRQ_TIMER1;
-	while (mask) {
-		if (mask & 1)
-			generic_handle_irq(irq);
-		irq++;
-		mask >>= 1;
-	}
-}
-
-/*
- * Timer interrupt handler
- */
-static irqreturn_t
-h7202_timer_interrupt(int irq, void *dev_id)
-{
-	h7202_timerx_demux_handler(0, NULL);
-	return IRQ_HANDLED;
-}
-
-/*
- * mask multiplexed timer IRQs
- */
-static void inline __mask_timerx_irq(unsigned int irq)
-{
-	unsigned int bit;
-	bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1));
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit;
-}
-
-static void inline mask_timerx_irq(struct irq_data *d)
-{
-	__mask_timerx_irq(d->irq);
-}
-
-/*
- * unmask multiplexed timer IRQs
- */
-static void inline unmask_timerx_irq(struct irq_data *d)
-{
-	unsigned int bit;
-	bit = 2 << ((d->irq == IRQ_TIMER64B) ? 4 : (d->irq - IRQ_TIMER1));
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit;
-}
-
-static struct irq_chip h7202_timerx_chip = {
-	.irq_ack = mask_timerx_irq,
-	.irq_mask = mask_timerx_irq,
-	.irq_unmask = unmask_timerx_irq,
-};
-
-static struct irqaction h7202_timer_irq = {
-	.name		= "h7202 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= h7202_timer_interrupt,
-};
-
-/*
- * Setup TIMER0 as system timer
- */
-void __init h7202_timer_init(void)
-{
-	arch_gettimeoffset = h720x_gettimeoffset;
-
-	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
-
-	setup_irq(IRQ_TIMER0, &h7202_timer_irq);
-}
-
-void __init h7202_init_irq (void)
-{
-	int 	irq;
-
-	CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0;
-
-	for (irq = IRQ_TIMER1;
-	                  irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) {
-		__mask_timerx_irq(irq);
-		irq_set_chip_and_handler(irq, &h7202_timerx_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler);
-
-	h720x_init_irq();
-}
-
-void __init init_hw_h7202(void)
-{
-	/* Enable clocks */
-	CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE;
-
-	CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-#ifdef CONFIG_H7202_SERIAL23
-	CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 |
-	                        AMULSEL_USIN3 | AMULSEL_USOUT3;
-#endif
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-}

arch/arm/mach-h720x/h7201-eval.c

@@ -1,38 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/h7201-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix GMS30C7201 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-MACHINE_START(H7201, "Hynix GMS30C7201")
-	/* Maintainer: Robert Schwebel, Pengutronix */
-	.atag_offset	= 0x1000,
-	.map_io		= h720x_map_io,
-	.init_irq	= h720x_init_irq,
-	.init_time	= h7201_timer_init,
-	.dma_zone_size	= SZ_256M,
-	.restart	= h720x_restart,
-MACHINE_END

arch/arm/mach-h720x/h7202-eval.c

@@ -1,81 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/h7202-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *		 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix HMS30C7202 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-static struct resource cirrus_resources[] = {
-	[0] = {
-		.start	= ETH0_PHYS + 0x300,
-		.end	= ETH0_PHYS + 0x300 + 0x10,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CHAINED_GPIOB(8),
-		.end	= IRQ_CHAINED_GPIOB(8),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cirrus_device = {
-	.name		= "cirrus-cs89x0",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cirrus_resources),
-	.resource	= cirrus_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cirrus_device,
-};
-
-/*
- * Hardware init. This is called early in initcalls
- * Place pin inits here. So you avoid adding ugly
- * #ifdef stuff to common drivers.
- * Use this only, if your bootloader is not able
- * to initialize the pins proper.
- */
-static void __init init_eval_h7202(void)
-{
-	init_hw_h7202();
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* Enable interrupt on portb bit 8 (ethernet) */
-	CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8);
-	CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8);
-}
-
-MACHINE_START(H7202, "Hynix HMS30C7202")
-	/* Maintainer: Robert Schwebel, Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= h720x_map_io,
-	.init_irq	= h7202_init_irq,
-	.init_time	= h7202_timer_init,
-	.init_machine	= init_eval_h7202,
-	.dma_zone_size	= SZ_256M,
-	.restart	= h720x_restart,
-MACHINE_END

arch/arm/mach-h720x/include/mach/boards.h

@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/boards.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the board specific defines for various devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
-#error Do not include this file directly. Include asm/hardware.h instead !
-#endif
-
-/* Hynix H7202 developer board specific device defines */
-#ifdef CONFIG_ARCH_H7202
-
-/* FLASH */
-#define H720X_FLASH_VIRT	0xd0000000
-#define H720X_FLASH_PHYS	0x00000000
-#define H720X_FLASH_SIZE	0x02000000
-
-/* onboard LAN controller */
-# define ETH0_PHYS		0x08000000
-
-/* Touch screen defines */
-/* GPIO Port */
-#define PEN_GPIO		GPIO_B_VIRT
-/* Bitmask for pen down interrupt */
-#define PEN_INT_BIT		(1<<7)
-/* Bitmask for pen up interrupt */
-#define PEN_ENA_BIT		(1<<6)
-/* pen up interrupt */
-#define IRQ_PEN			IRQ_MUX_GPIOB(7)
-
-#endif
-
-/* Hynix H7201 developer board specific device defines */
-#if defined (CONFIG_ARCH_H7201)
-/* ROM DISK SPACE */
-#define ROM_DISK_BASE           0xc1800000
-#define ROM_DISK_START          0x41800000
-#define ROM_DISK_SIZE           0x00700000
-
-/* SRAM DISK SPACE */
-#define SRAM_DISK_BASE          0xf1000000
-#define SRAM_DISK_START         0x04000000
-#define SRAM_DISK_SIZE          0x00400000
-#endif
-

arch/arm/mach-h720x/include/mach/debug-macro.S

@@ -1,40 +0,0 @@
-/* arch/arm/mach-h720x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-
-		.equ    io_virt, IO_VIRT
-		.equ    io_phys, IO_PHYS
-
-		.macro  addruart, rp, rv, tmp
-		mov     \rp, #0x00020000	@ UART1
-		add     \rv, \rp, #io_virt	@ virtual address
-		add     \rp, \rp, #io_phys	@ physical base address
-		.endm
-
-		.macro  senduart,rd,rx
-		str     \rd, [\rx, #0x0]        @ UARTDR
-
-		.endm
-
-		.macro  waituart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
-		bne     1001b
-		.endm
-
-		.macro  busyuart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
-		bne     1001b
-		.endm

arch/arm/mach-h720x/include/mach/entry-macro.S

@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Hynix HMS720x based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
-		@ we could use the id register on H7202, but this is not
-		@ properly updated when we come back from asm_do_irq
-		@ without a previous return from interrupt
-		@ (see loops below in irq_svc, irq_usr)
-		@ We see unmasked pending ints only, as the masked pending ints
-		@ are not visible here
-
-		mov     \base, #0xf0000000	       @ base register
-		orr     \base, \base, #0x24000	       @ irqbase
-		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
-#if defined (CONFIG_CPU_H7201)
-		ldr	\tmp, =0x001fffff
-#else
-		mvn     \tmp, #0xc0000000
-#endif
-		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
-		mov     \irqnr, #0
-
-		mov     \tmp, #0xff00
-		orr     \tmp, \tmp, #0xff
-		tst     \irqstat, \tmp
-		addeq   \irqnr, \irqnr, #16
-		moveq   \irqstat, \irqstat, lsr #16
-		tst     \irqstat, #255
-		addeq   \irqnr, \irqnr, #8
-		moveq   \irqstat, \irqstat, lsr #8
-		tst     \irqstat, #15
-		addeq   \irqnr, \irqnr, #4
-		moveq   \irqstat, \irqstat, lsr #4
-		tst     \irqstat, #3
-		addeq   \irqnr, \irqnr, #2
-		moveq   \irqstat, \irqstat, lsr #2
-		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tst     \irqstat, #1		       @ bit 0 should be set
-		.endm
-
-#else
-#error hynix processor selection missmatch
-#endif
-

arch/arm/mach-h720x/include/mach/h7201-regs.h

@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/h7201-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
-#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
-
-/*
- * PCMCIA
- */
-#define PCMCIA0_ATT_BASE        0xe5000000
-#define PCMCIA0_ATT_SIZE        0x00200000
-#define PCMCIA0_ATT_START       0x20000000
-#define PCMCIA0_MEM_BASE        0xe5200000
-#define PCMCIA0_MEM_SIZE        0x00200000
-#define PCMCIA0_MEM_START       0x24000000
-#define PCMCIA0_IO_BASE         0xe5400000
-#define PCMCIA0_IO_SIZE         0x00200000
-#define PCMCIA0_IO_START        0x28000000
-
-#define PCMCIA1_ATT_BASE        0xe5600000
-#define PCMCIA1_ATT_SIZE        0x00200000
-#define PCMCIA1_ATT_START       0x30000000
-#define PCMCIA1_MEM_BASE        0xe5800000
-#define PCMCIA1_MEM_SIZE        0x00200000
-#define PCMCIA1_MEM_START       0x34000000
-#define PCMCIA1_IO_BASE         0xe5a00000
-#define PCMCIA1_IO_SIZE         0x00200000
-#define PCMCIA1_IO_START        0x38000000
-
-#define PRIME3C_BASE            0xf0050000
-#define PRIME3C_SIZE            0x00001000
-#define PRIME3C_START           0x10000000
-
-/* VGA Controller */
-#define VGA_RAMBASE 		0x50
-#define VGA_TIMING0 		0x60
-#define VGA_TIMING1 		0x64
-#define VGA_TIMING2 		0x68
-#define VGA_TIMING3 		0x6c
-
-#define LCD_CTRL_VGA_ENABLE   	0x00000100
-#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
-#define LCD_CTRL_VGA_4BPP    	0x00000000
-#define LCD_CTRL_VGA_8BPP    	0x00000200
-#define LCD_CTRL_VGA_16BPP   	0x00000300
-#define LCD_CTRL_SHARE_DMA    	0x00000800
-#define LCD_CTRL_VDE          	0x00100000
-#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
-#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
-
-#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)

arch/arm/mach-h720x/include/mach/h7202-regs.h

@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/h7202-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_OFS		0x2d000
-#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
-#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
-#define SERIAL3_OFS		0x2e000
-#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
-#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
-
-/* Matrix Keyboard Controller */
-#define KBD_VIRT		(IO_VIRT + 0x22000)
-#define KBD_KBCR		0x00
-#define KBD_KBSC		0x04
-#define KBD_KBTR		0x08
-#define KBD_KBVR0		0x0C
-#define KBD_KBVR1		0x10
-#define KBD_KBSR		0x18
-
-#define KBD_KBCR_SCANENABLE	(1 << 7)
-#define KBD_KBCR_NPOWERDOWN	(1 << 2)
-#define KBD_KBCR_CLKSEL_MASK	(3)
-#define KBD_KBCR_CLKSEL_PCLK2	0x0
-#define KBD_KBCR_CLKSEL_PCLK128	0x1
-#define KBD_KBCR_CLKSEL_PCLK256	0x2
-#define KBD_KBCR_CLKSEL_PCLK512	0x3
-
-#define KBD_KBSR_INTR		(1 << 0)
-#define KBD_KBSR_WAKEUP		(1 << 1)
-
-/* USB device controller */
-
-#define USBD_BASE		(IO_VIRT + 0x12000)
-#define USBD_LENGTH		0x3C
-
-#define USBD_GCTRL		0x00
-#define USBD_EPCTRL		0x04
-#define USBD_INTMASK		0x08
-#define USBD_INTSTAT		0x0C
-#define USBD_PWR		0x10
-#define USBD_DMARXTX		0x14
-#define USBD_DEVID		0x18
-#define USBD_DEVCLASS		0x1C
-#define USBD_INTCLASS		0x20
-#define USBD_SETUP0		0x24
-#define USBD_SETUP1		0x28
-#define USBD_ENDP0RD		0x2C
-#define USBD_ENDP0WT		0x30
-#define USBD_ENDP1RD		0x34
-#define USBD_ENDP2WT		0x38
-
-/* PS/2 port */
-#define PSDATA 0x00
-#define PSSTAT 0x04
-#define PSSTAT_TXEMPTY (1<<0)
-#define PSSTAT_TXBUSY (1<<1)
-#define PSSTAT_RXFULL (1<<2)
-#define PSSTAT_RXBUSY (1<<3)
-#define PSSTAT_CLKIN (1<<4)
-#define PSSTAT_DATAIN (1<<5)
-#define PSSTAT_PARITY (1<<6)
-
-#define PSCONF 0x08
-#define PSCONF_ENABLE (1<<0)
-#define PSCONF_TXINTEN (1<<2)
-#define PSCONF_RXINTEN (1<<3)
-#define PSCONF_FORCECLKLOW (1<<4)
-#define PSCONF_FORCEDATLOW (1<<5)
-#define PSCONF_LCE (1<<6)
-
-#define PSINTR 0x0C
-#define PSINTR_TXINT (1<<0)
-#define PSINTR_RXINT (1<<1)
-#define PSINTR_PAR (1<<2)
-#define PSINTR_RXTO (1<<3)
-#define PSINTR_TXTO (1<<4)
-
-#define PSTDLO 0x10 /* clk low before start transmission */
-#define PSTPRI 0x14 /* PRI clock */
-#define PSTXMT 0x18 /* maximum transmission time */
-#define PSTREC 0x20 /* maximum receive time */
-#define PSPWDN 0x3c
-
-/* ADC converter */
-#define ADC_BASE 		(IO_VIRT + 0x29000)
-#define ADC_CR 			0x00
-#define ADC_TSCTRL 		0x04
-#define ADC_BT_CTRL 		0x08
-#define ADC_MC_CTRL		0x0C
-#define ADC_STATUS		0x10
-
-/* ADC control register bits */
-#define ADC_CR_PW_CTRL 		0x80
-#define ADC_CR_DIRECTC		0x04
-#define ADC_CR_CONTIME_NO	0x00
-#define ADC_CR_CONTIME_2	0x04
-#define ADC_CR_CONTIME_4	0x08
-#define ADC_CR_CONTIME_ADE	0x0c
-#define ADC_CR_LONGCALTIME	0x01
-
-/* ADC touch panel register bits */
-#define ADC_TSCTRL_ENABLE 	0x80
-#define ADC_TSCTRL_INTR   	0x40
-#define	ADC_TSCTRL_SWBYPSS	0x20
-#define ADC_TSCTRL_SWINVT	0x10
-#define ADC_TSCTRL_S400   	0x03
-#define ADC_TSCTRL_S200   	0x02
-#define ADC_TSCTRL_S100   	0x01
-#define ADC_TSCTRL_S50    	0x00
-
-/* ADC Interrupt Status Register bits */
-#define ADC_STATUS_TS_BIT	0x80
-#define ADC_STATUS_MBT_BIT	0x40
-#define ADC_STATUS_BBT_BIT	0x20
-#define ADC_STATUS_MIC_BIT	0x10
-
-/* Touch data registers */
-#define ADC_TS_X0X1  		0x30
-#define ADC_TS_X2X3		0x34
-#define ADC_TS_Y0Y1		0x38
-#define ADC_TS_Y2Y3  		0x3c
-#define ADC_TS_X4X5  		0x40
-#define ADC_TS_X6X7  		0x44
-#define ADC_TS_Y4Y5		0x48
-#define ADC_TS_Y6Y7		0x50
-
-/* battery data */
-#define ADC_MB_DATA		0x54
-#define ADC_BB_DATA		0x58
-
-/* Sound data register */
-#define ADC_SD_DAT0 		0x60
-#define ADC_SD_DAT1		0x64
-#define ADC_SD_DAT2		0x68
-#define ADC_SD_DAT3		0x6c
-#define ADC_SD_DAT4		0x70
-#define ADC_SD_DAT5		0x74
-#define ADC_SD_DAT6		0x78
-#define ADC_SD_DAT7		0x7c

arch/arm/mach-h720x/include/mach/hardware.h

@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/hardware.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define IOCLK (3686400L)
-
-/* Onchip peripherals */
-
-#define IO_VIRT			0xf0000000	/* IO peripherals */
-#define IO_PHYS			0x80000000
-#define IO_SIZE			0x00050000
-
-#ifdef CONFIG_CPU_H7202
-#include "h7202-regs.h"
-#elif defined CONFIG_CPU_H7201
-#include "h7201-regs.h"
-#else
-#error machine definition mismatch
-#endif
-
-/* Macro to access the CPU IO */
-#define CPU_IO(x) (*(volatile u32*)(x))
-
-/* Macro to access general purpose regs (base, offset) */
-#define CPU_REG(x,y) CPU_IO(x+y)
-
-/* Macro to access irq related regs */
-#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
-
-/* CPU registers */
-/* general purpose I/O */
-#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
-#define GPIO_A_VIRT		(GPIO_VIRT(0))
-#define GPIO_B_VIRT		(GPIO_VIRT(1))
-#define GPIO_C_VIRT		(GPIO_VIRT(2))
-#define GPIO_D_VIRT		(GPIO_VIRT(3))
-#define GPIO_E_VIRT		(GPIO_VIRT(4))
-#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
-
-#define AMULSEL_USIN2	(1<<5)
-#define AMULSEL_USOUT2	(1<<6)
-#define AMULSEL_USIN3	(1<<13)
-#define AMULSEL_USOUT3	(1<<14)
-#define AMULSEL_IRDIN	(1<<15)
-#define AMULSEL_IRDOUT	(1<<7)
-
-/* Register offsets general purpose I/O */
-#define GPIO_DATA		0x00
-#define GPIO_DIR		0x04
-#define GPIO_MASK		0x08
-#define GPIO_STAT		0x0C
-#define GPIO_EDGE		0x10
-#define GPIO_CLR		0x14
-#define GPIO_POL		0x18
-#define GPIO_EN			0x1C
-
-/*interrupt controller */
-#define IRQC_VIRT		(IO_VIRT + 0x24000)
-/* register offset interrupt controller */
-#define IRQC_IER		0x00
-#define IRQC_ISR		0x04
-
-/* timer unit */
-#define TIMER_VIRT		(IO_VIRT + 0x25000)
-/* Register offsets timer unit */
-#define TM0_PERIOD   		0x00
-#define TM0_COUNT    		0x08
-#define TM0_CTRL     		0x10
-#define TM1_PERIOD   		0x20
-#define TM1_COUNT    		0x28
-#define TM1_CTRL     		0x30
-#define TM2_PERIOD   		0x40
-#define TM2_COUNT    		0x48
-#define TM2_CTRL     		0x50
-#define TIMER_TOPCTRL		0x60
-#define TIMER_TOPSTAT		0x64
-#define T64_COUNTL		0x80
-#define T64_COUNTH		0x84
-#define T64_CTRL		0x88
-#define T64_BASEL		0x94
-#define T64_BASEH		0x98
-/* Bitmaks timer unit TOPSTAT reg */
-#define TSTAT_T0INT		0x1
-#define TSTAT_T1INT		0x2
-#define TSTAT_T2INT		0x4
-#define TSTAT_T3INT		0x8
-/* Bit description of TMx_CTRL register */
-#define TM_START  		0x1
-#define TM_REPEAT 		0x2
-#define TM_RESET  		0x4
-/* Bit description of TIMER_CTRL register */
-#define ENABLE_TM0_INTR  	0x1
-#define ENABLE_TM1_INTR  	0x2
-#define ENABLE_TM2_INTR  	0x4
-#define TIMER_ENABLE_BIT 	0x8
-#define ENABLE_TIMER64   	0x10
-#define ENABLE_TIMER64_INT	0x20
-
-/* PMU & PLL */
-#define PMU_BASE 		(IO_VIRT + 0x1000)
-#define PMU_MODE		0x00
-#define PMU_STAT   		0x20
-#define PMU_PLL_CTRL 		0x28
-
-/* PMU Mode bits */
-#define PMU_MODE_SLOW		0x00
-#define PMU_MODE_RUN		0x01
-#define PMU_MODE_IDLE		0x02
-#define PMU_MODE_SLEEP		0x03
-#define PMU_MODE_INIT		0x04
-#define PMU_MODE_DEEPSLEEP	0x07
-#define PMU_MODE_WAKEUP		0x08
-
-/* PMU ... */
-#define PLL_2_EN		0x8000
-#define PLL_1_EN		0x4000
-#define PLL_3_MUTE		0x0080
-
-/* Control bits for PMU/ PLL */
-#define PMU_WARMRESET		0x00010000
-#define PLL_CTRL_MASK23		0x000080ff
-
-/* LCD Controller */
-#define LCD_BASE 		(IO_VIRT + 0x10000)
-#define LCD_CTRL 		0x00
-#define LCD_STATUS		0x04
-#define LCD_STATUS_M		0x08
-#define LCD_INTERRUPT		0x0C
-#define LCD_DBAR		0x10
-#define LCD_DCAR		0x14
-#define LCD_TIMING0 		0x20
-#define LCD_TIMING1 		0x24
-#define LCD_TIMING2 		0x28
-#define LCD_TEST		0x40
-
-/* LCD Control Bits */
-#define LCD_CTRL_LCD_ENABLE   	0x00000001
-/* Bits per pixel */
-#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
-#define LCD_CTRL_LCD_4BPP    	0x00000000
-#define LCD_CTRL_LCD_8BPP    	0x00000002
-#define LCD_CTRL_LCD_16BPP   	0x00000004
-#define LCD_CTRL_LCD_BW		0x00000008
-#define LCD_CTRL_LCD_TFT	0x00000010
-#define LCD_CTRL_BGR		0x00001000
-#define LCD_CTRL_LCD_VCOMP	0x00080000
-#define LCD_CTRL_LCD_MONO8	0x00200000
-#define LCD_CTRL_LCD_PWR	0x00400000
-#define LCD_CTRL_LCD_BLE	0x00800000
-#define LCD_CTRL_LDBUSEN	0x01000000
-
-/* Palette */
-#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
-
-/* Serial ports */
-#define SERIAL0_OFS		0x20000
-#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
-#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
-
-#define SERIAL1_OFS		0x21000
-#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
-#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
-
-#define SERIAL_ENABLE		0x30
-#define SERIAL_ENABLE_EN	(1<<0)
-
-/* General defines to pacify gcc */
-
-#define __ASM_ARCH_HARDWARE_INCMACH_H
-#include "boards.h"
-#undef __ASM_ARCH_HARDWARE_INCMACH_H
-
-#endif				/* __ASM_ARCH_HARDWARE_H */

arch/arm/mach-h720x/include/mach/irqs.h

@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/irqs.h
- *
- * Copyright (C) 2000 Jungjun Kim
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#if defined (CONFIG_CPU_H7201)
-
-#define IRQ_PMU		0		/* 0x000001 */
-#define IRQ_DMA		1 		/* 0x000002 */
-#define IRQ_LCD		2		/* 0x000004 */
-#define IRQ_VGA		3 		/* 0x000008 */
-#define IRQ_PCMCIA1 	4 		/* 0x000010 */
-#define IRQ_PCMCIA2 	5 		/* 0x000020 */
-#define IRQ_AFE		6 		/* 0x000040 */
-#define IRQ_AIC		7 		/* 0x000080 */
-#define IRQ_KEYBOARD 	8 		/* 0x000100 */
-#define IRQ_TIMER0	9 		/* 0x000200 */
-#define IRQ_RTC		10		/* 0x000400 */
-#define IRQ_SOUND	11		/* 0x000800 */
-#define IRQ_USB		12		/* 0x001000 */
-#define IRQ_IrDA 	13		/* 0x002000 */
-#define IRQ_UART0	14		/* 0x004000 */
-#define IRQ_UART1	15		/* 0x008000 */
-#define IRQ_SPI		16		/* 0x010000 */
-#define IRQ_GPIOA 	17		/* 0x020000 */
-#define IRQ_GPIOB	18		/* 0x040000 */
-#define IRQ_GPIOC	19		/* 0x080000 */
-#define IRQ_GPIOD	20		/* 0x100000 */
-#define IRQ_CommRX	21		/* 0x200000 */
-#define IRQ_CommTX	22		/* 0x400000 */
-#define IRQ_Soft	23		/* 0x800000 */
-
-#define NR_GLBL_IRQS	24
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
-			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
-
-
-#elif defined (CONFIG_CPU_H7202)
-
-#define IRQ_PMU		0		/* 0x00000001 */
-#define IRQ_DMA		1		/* 0x00000002 */
-#define IRQ_LCD		2		/* 0x00000004 */
-#define IRQ_SOUND	3		/* 0x00000008 */
-#define IRQ_I2S		4		/* 0x00000010 */
-#define IRQ_USB 	5		/* 0x00000020 */
-#define IRQ_MMC 	6		/* 0x00000040 */
-#define IRQ_RTC 	7		/* 0x00000080 */
-#define IRQ_UART0 	8		/* 0x00000100 */
-#define IRQ_UART1 	9		/* 0x00000200 */
-#define IRQ_UART2 	10		/* 0x00000400 */
-#define IRQ_UART3 	11		/* 0x00000800 */
-#define IRQ_KBD 	12		/* 0x00001000 */
-#define IRQ_PS2 	13		/* 0x00002000 */
-#define IRQ_AIC 	14		/* 0x00004000 */
-#define IRQ_TIMER0 	15		/* 0x00008000 */
-#define IRQ_TIMERX 	16		/* 0x00010000 */
-#define IRQ_WDT 	17		/* 0x00020000 */
-#define IRQ_CAN0 	18		/* 0x00040000 */
-#define IRQ_CAN1 	19		/* 0x00080000 */
-#define IRQ_EXT0 	20		/* 0x00100000 */
-#define IRQ_EXT1 	21		/* 0x00200000 */
-#define IRQ_GPIOA 	22		/* 0x00400000 */
-#define IRQ_GPIOB 	23		/* 0x00800000 */
-#define IRQ_GPIOC 	24		/* 0x01000000 */
-#define IRQ_GPIOD 	25		/* 0x02000000 */
-#define IRQ_GPIOE 	26		/* 0x04000000 */
-#define IRQ_COMMRX 	27		/* 0x08000000 */
-#define IRQ_COMMTX 	28		/* 0x10000000 */
-#define IRQ_SMC 	29		/* 0x20000000 */
-#define IRQ_Soft 	30		/* 0x40000000 */
-#define IRQ_RESERVED1 	31		/* 0x80000000 */
-#define NR_GLBL_IRQS	32
-
-#define NR_TIMERX_IRQS	3
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
-#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
-#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
-#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
-#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
-
-#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
-			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
-			(1<<IRQ_TIMERX)
-
-#else
-#error cpu definition mismatch
-#endif
-
-/* decode irq number to register number */
-#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
-#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
-
-#endif

arch/arm/mach-h720x/include/mach/isa-dma.h

@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/isa-dma.h
- *
- * Architecture DMA routes
- *
- * Copyright (C) 1997.1998 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#if defined (CONFIG_CPU_H7201)
-#define MAX_DMA_CHANNELS	3
-#elif defined (CONFIG_CPU_H7202)
-#define MAX_DMA_CHANNELS	4
-#else
-#error processor definition missmatch
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */

arch/arm/mach-h720x/include/mach/uncompress.h

@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/uncompress.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/hardware.h>
-
-#define LSR 	0x14
-#define TEMPTY 	0x40
-
-static inline void putc(int c)
-{
-	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
-
-	/* wait until transmit buffer is empty */
-	while((p[LSR] & TEMPTY) == 0x0)
-		barrier();
-
-	/* write next character */
-	*p = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#endif

arch/arm/mach-highbank/highbank.c

@@ -32,7 +32,6 @@
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/smp_plat.h>
-#include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -119,10 +118,10 @@ static void __init highbank_timer_init(void)
 	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
 	sp804_clockevents_init(timer_base, irq, "timer0");
 
-	twd_local_timer_of_register();
-
 	arch_timer_of_register();
 	arch_timer_sched_clock_init();
+
+	clocksource_of_init();
 }
 
 static void highbank_power_off(void)

arch/arm/mach-highbank/platsmp.c

@@ -17,7 +17,6 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
 
 #include <asm/smp_scu.h>
 
@@ -25,11 +24,6 @@
 
 extern void secondary_startup(void);
 
-static void __cpuinit highbank_secondary_init(unsigned int cpu)
-{
-	gic_secondary_init(0);
-}
-
 static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	highbank_set_cpu_jump(cpu, secondary_startup);
@@ -67,7 +61,6 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
 struct smp_operations highbank_smp_ops __initdata = {
 	.smp_init_cpus		= highbank_smp_init_cpus,
 	.smp_prepare_cpus	= highbank_smp_prepare_cpus,
-	.smp_secondary_init	= highbank_secondary_init,
 	.smp_boot_secondary	= highbank_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= highbank_cpu_die,

arch/arm/mach-imx/Kconfig

@@ -83,24 +83,12 @@ config ARCH_MXC_IOMUX_V3
 config ARCH_MX1
 	bool
 
-config MACH_MX21
-	bool
-
 config ARCH_MX25
 	bool
 
 config MACH_MX27
 	bool
 
-config ARCH_MX5
-	bool
-
-config ARCH_MX51
-	bool
-
-config ARCH_MX53
-	bool
-
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -114,7 +102,6 @@ config SOC_IMX21
 	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
-	select MACH_MX21
 	select MXC_AVIC
 
 config SOC_IMX25
@@ -155,7 +142,6 @@ config SOC_IMX35
 config SOC_IMX5
 	bool
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select CPU_V7
@@ -163,8 +149,6 @@ config SOC_IMX5
 
 config	SOC_IMX51
 	bool
-	select ARCH_MX5
-	select ARCH_MX51
 	select PINCTRL
 	select PINCTRL_IMX51
 	select SOC_IMX5
@@ -789,8 +773,6 @@ comment "Device tree only"
 
 config	SOC_IMX53
 	bool "i.MX53 support"
-	select ARCH_MX5
-	select ARCH_MX53
 	select HAVE_CAN_FLEXCAN if CAN
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select PINCTRL

arch/arm/mach-imx/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o
@@ -27,7 +27,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o

arch/arm/mach-imx/Makefile.boot

@@ -1,35 +0,0 @@
-zreladdr-$(CONFIG_SOC_IMX1)	+= 0x08008000
-params_phys-$(CONFIG_SOC_IMX1)	:= 0x08000100
-initrd_phys-$(CONFIG_SOC_IMX1)	:= 0x08800000
-
-zreladdr-$(CONFIG_SOC_IMX21)	+= 0xC0008000
-params_phys-$(CONFIG_SOC_IMX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_SOC_IMX21)	:= 0xC0800000
-
-zreladdr-$(CONFIG_SOC_IMX25)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX25)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX25)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX27)	+= 0xA0008000
-params_phys-$(CONFIG_SOC_IMX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_SOC_IMX27)	:= 0xA0800000
-
-zreladdr-$(CONFIG_SOC_IMX31)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX31)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX31)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX51)	+= 0x90008000
-params_phys-$(CONFIG_SOC_IMX51)	:= 0x90000100
-initrd_phys-$(CONFIG_SOC_IMX51)	:= 0x90800000
-
-zreladdr-$(CONFIG_SOC_IMX53)	+= 0x70008000
-params_phys-$(CONFIG_SOC_IMX53)	:= 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX53)	:= 0x70800000
-
-zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
-params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
-initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000

arch/arm/mach-imx/avic.c

@@ -54,8 +54,6 @@
 static void __iomem *avic_base;
 static struct irq_domain *domain;
 
-static u32 avic_saved_mask_reg[2];
-
 #ifdef CONFIG_MXC_IRQ_PRIOR
 static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -113,6 +111,8 @@ static struct mxc_extra_irq avic_extra_irq = {
 };
 
 #ifdef CONFIG_PM
+static u32 avic_saved_mask_reg[2];
+
 static void avic_irq_suspend(struct irq_data *d)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);

arch/arm/mach-imx/clk-imx27.c

@@ -278,8 +278,6 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
 	clk_register_clkdev(clk[cpu_div], "cpu", NULL);
 	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
-	clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
 
 	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
 

arch/arm/mach-imx/common.h

@@ -113,7 +113,6 @@ extern void imx_set_cpu_jump(int cpu, void *jump_addr);
 extern u32 imx_get_cpu_arg(int cpu);
 extern void imx_set_cpu_arg(int cpu, u32 arg);
 extern void v7_cpu_resume(void);
-extern u32 *pl310_get_save_ptr(void);
 #ifdef CONFIG_SMP
 extern void v7_secondary_startup(void);
 extern void imx_scu_map_io(void);
@@ -124,8 +123,6 @@ static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
 static inline void imx_scu_standby_enable(void) {}
 #endif
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
 extern void imx_src_init(void);
 extern void imx_src_prepare_restart(void);
 extern void imx_gpc_init(void);

arch/arm/mach-imx/cpu_op-mx51.c

@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/bug.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include "hardware.h"
-
-static struct cpu_op mx51_cpu_op[] = {
-	{
-	.cpu_rate = 160000000,},
-	{
-	.cpu_rate = 800000000,},
-};
-
-struct cpu_op *mx51_get_cpu_op(int *op)
-{
-	*op = ARRAY_SIZE(mx51_cpu_op);
-	return mx51_cpu_op;
-}

arch/arm/mach-imx/cpu_op-mx51.h

@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-extern struct cpu_op *mx51_get_cpu_op(int *op);

arch/arm/mach-imx/cpufreq.c

@@ -1,202 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
- * the CPU clock speed on the fly.
- */
-
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include "hardware.h"
-
-#define CLK32_FREQ	32768
-#define NANOSECOND	(1000 * 1000 * 1000)
-
-struct cpu_op *(*get_cpu_op)(int *op);
-
-static int cpu_freq_khz_min;
-static int cpu_freq_khz_max;
-
-static struct clk *cpu_clk;
-static struct cpufreq_frequency_table *imx_freq_table;
-
-static int cpu_op_nr;
-static struct cpu_op *cpu_op_tbl;
-
-static int set_cpu_freq(int freq)
-{
-	int ret = 0;
-	int org_cpu_rate;
-
-	org_cpu_rate = clk_get_rate(cpu_clk);
-	if (org_cpu_rate == freq)
-		return ret;
-
-	ret = clk_set_rate(cpu_clk, freq);
-	if (ret != 0) {
-		printk(KERN_DEBUG "cannot set CPU clock rate\n");
-		return ret;
-	}
-
-	return ret;
-}
-
-static int mxc_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, imx_freq_table);
-}
-
-static unsigned int mxc_get_speed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpu_clk) / 1000;
-}
-
-static int mxc_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq, unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	int freq_Hz;
-	int ret = 0;
-	unsigned int index;
-
-	cpufreq_frequency_table_target(policy, imx_freq_table,
-			target_freq, relation, &index);
-	freq_Hz = imx_freq_table[index].frequency * 1000;
-
-	freqs.old = clk_get_rate(cpu_clk) / 1000;
-	freqs.new = freq_Hz / 1000;
-	freqs.flags = 0;
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-	ret = set_cpu_freq(freq_Hz);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static int mxc_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int ret;
-	int i;
-
-	printk(KERN_INFO "i.MXC CPU frequency driver\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	if (!get_cpu_op)
-		return -EINVAL;
-
-	cpu_clk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(cpu_clk)) {
-		printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
-		return PTR_ERR(cpu_clk);
-	}
-
-	cpu_op_tbl = get_cpu_op(&cpu_op_nr);
-
-	cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
-	cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
-
-	imx_freq_table = kmalloc(
-		sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
-			GFP_KERNEL);
-	if (!imx_freq_table) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	for (i = 0; i < cpu_op_nr; i++) {
-		imx_freq_table[i].index = i;
-		imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
-
-		if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
-			cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
-
-		if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
-			cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
-	}
-
-	imx_freq_table[i].index = i;
-	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	policy->cur = clk_get_rate(cpu_clk) / 1000;
-
-	/* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
-		       __func__, ret);
-		goto err;
-	}
-
-	cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
-	return 0;
-err:
-	kfree(imx_freq_table);
-err1:
-	clk_put(cpu_clk);
-	return ret;
-}
-
-static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-
-	set_cpu_freq(cpu_freq_khz_max * 1000);
-	clk_put(cpu_clk);
-	kfree(imx_freq_table);
-	return 0;
-}
-
-static struct cpufreq_driver mxc_driver = {
-	.flags = CPUFREQ_STICKY,
-	.verify = mxc_verify_speed,
-	.target = mxc_set_target,
-	.get = mxc_get_speed,
-	.init = mxc_cpufreq_init,
-	.exit = mxc_cpufreq_exit,
-	.name = "imx",
-};
-
-static int mxc_cpufreq_driver_init(void)
-{
-	return cpufreq_register_driver(&mxc_driver);
-}
-
-static void mxc_cpufreq_driver_exit(void)
-{
-	cpufreq_unregister_driver(&mxc_driver);
-}
-
-module_init(mxc_cpufreq_driver_init);
-module_exit(mxc_cpufreq_driver_exit);
-
-MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
-MODULE_DESCRIPTION("CPUfreq driver for i.MX");
-MODULE_LICENSE("GPL");

arch/arm/mach-imx/devices/Kconfig

@@ -86,7 +86,3 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 
 config IMX_HAVE_PLATFORM_SPI_IMX
 	bool
-
-config IMX_HAVE_PLATFORM_AHCI
-	bool
-	default y if ARCH_MX53

arch/arm/mach-imx/devices/Makefile

@@ -29,5 +29,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o

arch/arm/mach-imx/devices/devices-common.h

@@ -344,13 +344,3 @@ struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
 					int irq, int irq_err);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
-
-#include <linux/ahci_platform.h>
-struct imx_ahci_imx_data {
-	const char *devid;
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_ahci_imx(
-		const struct imx_ahci_imx_data *data,
-		const struct ahci_platform_data *pdata);

arch/arm/mach-imx/devices/platform-ahci-imx.c

@@ -1,157 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_ahci_imx_data_entry_single(soc, _devid)		\
-	{								\
-		.devid = _devid,					\
-		.iobase = soc ## _SATA_BASE_ADDR,			\
-		.irq = soc ## _INT_SATA,				\
-	}
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
-	imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
-#endif
-
-enum {
-	HOST_CAP = 0x00,
-	HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
-	HOST_PORTS_IMPL	= 0x0c,
-	HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
-};
-
-static struct clk *sata_clk, *sata_ref_clk;
-
-/* AHCI module Initialization, if return 0, initialization is successful. */
-static int imx_sata_init(struct device *dev, void __iomem *addr)
-{
-	u32 tmpdata;
-	int ret = 0;
-	struct clk *clk;
-
-	sata_clk = clk_get(dev, "ahci");
-	if (IS_ERR(sata_clk)) {
-		dev_err(dev, "no sata clock.\n");
-		return PTR_ERR(sata_clk);
-	}
-	ret = clk_prepare_enable(sata_clk);
-	if (ret) {
-		dev_err(dev, "can't prepare/enable sata clock.\n");
-		goto put_sata_clk;
-	}
-
-	/* Get the AHCI SATA PHY CLK */
-	sata_ref_clk = clk_get(dev, "ahci_phy");
-	if (IS_ERR(sata_ref_clk)) {
-		dev_err(dev, "no sata ref clock.\n");
-		ret = PTR_ERR(sata_ref_clk);
-		goto release_sata_clk;
-	}
-	ret = clk_prepare_enable(sata_ref_clk);
-	if (ret) {
-		dev_err(dev, "can't prepare/enable sata ref clock.\n");
-		goto put_sata_ref_clk;
-	}
-
-	/* Get the AHB clock rate, and configure the TIMER1MS reg later */
-	clk = clk_get(dev, "ahci_dma");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "no dma clock.\n");
-		ret = PTR_ERR(clk);
-		goto release_sata_ref_clk;
-	}
-	tmpdata = clk_get_rate(clk) / 1000;
-	clk_put(clk);
-
-	writel(tmpdata, addr + HOST_TIMER1MS);
-
-	tmpdata = readl(addr + HOST_CAP);
-	if (!(tmpdata & HOST_CAP_SSS)) {
-		tmpdata |= HOST_CAP_SSS;
-		writel(tmpdata, addr + HOST_CAP);
-	}
-
-	if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
-		writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
-			addr + HOST_PORTS_IMPL);
-
-	return 0;
-
-release_sata_ref_clk:
-	clk_disable_unprepare(sata_ref_clk);
-put_sata_ref_clk:
-	clk_put(sata_ref_clk);
-release_sata_clk:
-	clk_disable_unprepare(sata_clk);
-put_sata_clk:
-	clk_put(sata_clk);
-
-	return ret;
-}
-
-static void imx_sata_exit(struct device *dev)
-{
-	clk_disable_unprepare(sata_ref_clk);
-	clk_put(sata_ref_clk);
-
-	clk_disable_unprepare(sata_clk);
-	clk_put(sata_clk);
-
-}
-struct platform_device *__init imx_add_ahci_imx(
-		const struct imx_ahci_imx_data *data,
-		const struct ahci_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device_dmamask(data->devid, 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata),  DMA_BIT_MASK(32));
-}
-
-struct platform_device *__init imx53_add_ahci_imx(void)
-{
-	struct ahci_platform_data pdata = {
-		.init = imx_sata_init,
-		.exit = imx_sata_exit,
-	};
-
-	return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
-}

arch/arm/mach-imx/hardware.h

@@ -102,7 +102,6 @@
 
 #include "mxc.h"
 
-#include "mx6q.h"
 #include "mx51.h"
 #include "mx53.h"
 #include "mx3x.h"

arch/arm/mach-imx/mach-cpuimx51sd.c

@@ -33,7 +33,6 @@
 
 #include "common.h"
 #include "devices-imx51.h"
-#include "cpu_op-mx51.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx51.h"
@@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void)
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
 					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
 
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-
 	imx51_add_imx_uart(0, &uart_pdata);
 	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
 	imx51_add_imx2_wdt(0);

arch/arm/mach-imx/mach-imx6q.c

@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/clocksource.h>
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/export.h>
@@ -28,11 +29,9 @@
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
-#include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
 #include "common.h"
@@ -292,7 +291,7 @@ static void __init imx6q_init_irq(void)
 static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
-	twd_local_timer_of_register();
+	clocksource_of_init();
 	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 

arch/arm/mach-imx/mach-mx51_babbage.c

@@ -27,7 +27,6 @@
 
 #include "common.h"
 #include "devices-imx51.h"
-#include "cpu_op-mx51.h"
 #include "hardware.h"
 #include "iomux-mx51.h"
 
@@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void)
 
 	imx51_soc_init();
 
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
 	imx51_babbage_common_init();
 
 	imx51_add_imx_uart(0, &uart_pdata);

arch/arm/mach-imx/mx6q.h

@@ -1,31 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_MX6Q_H__
-#define __MACH_MX6Q_H__
-
-#define MX6Q_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX6Q_IO_ADDRESS(x)		IOMEM(MX6Q_IO_P2V(x))
-
-/*
- * The following are the blocks that need to be statically mapped.
- * For other blocks, the base address really should be retrieved from
- * device tree.
- */
-#define MX6Q_SCU_BASE_ADDR		0x00a00000
-#define MX6Q_SCU_SIZE			0x1000
-#define MX6Q_CCM_BASE_ADDR		0x020c4000
-#define MX6Q_CCM_SIZE			0x4000
-#define MX6Q_ANATOP_BASE_ADDR		0x020c8000
-#define MX6Q_ANATOP_SIZE		0x1000
-
-#endif	/* __MACH_MX6Q_H__ */

arch/arm/mach-imx/platsmp.c

@@ -12,7 +12,6 @@
 
 #include <linux/init.h>
 #include <linux/smp.h>
-#include <linux/irqchip/arm-gic.h>
 #include <asm/page.h>
 #include <asm/smp_scu.h>
 #include <asm/mach/map.h>
@@ -52,16 +51,6 @@ void imx_scu_standby_enable(void)
 	writel_relaxed(val, scu_base);
 }
 
-static void __cpuinit imx_secondary_init(unsigned int cpu)
-{
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-}
-
 static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	imx_set_cpu_jump(cpu, v7_secondary_startup);
@@ -96,7 +85,6 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
 struct smp_operations  imx_smp_ops __initdata = {
 	.smp_init_cpus		= imx_smp_init_cpus,
 	.smp_prepare_cpus	= imx_smp_prepare_cpus,
-	.smp_secondary_init	= imx_secondary_init,
 	.smp_boot_secondary	= imx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= imx_cpu_die,

arch/arm/mach-l7200/include/mach/debug-macro.S

@@ -1,38 +0,0 @@
-/* arch/arm/mach-l7200/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ	io_virt, IO_BASE
-		.equ	io_phys, IO_START
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00044000	@ UART1
-@		mov	\rp, #0x00045000	@ UART2
-		add	\rv, \rp, #io_virt	@ virtual address
-		add	\rp, \rp, #io_phys	@ physical base address
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
-		bne	1001b
-		.endm

arch/arm/mach-msm/board-halibut.c

@@ -59,6 +59,7 @@ static struct platform_device smc91x_device = {
 };
 
 static struct platform_device *devices[] __initdata = {
+	&msm_device_gpio_7201,
 	&msm_device_uart3,
 	&msm_device_smd,
 	&msm_device_nand,

arch/arm/mach-msm/board-msm7x30.c

@@ -89,6 +89,7 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
 };
 
 static struct platform_device *devices[] __initdata = {
+	&msm_device_gpio_7x30,
 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
         &msm_device_uart2,
 #endif

arch/arm/mach-msm/board-qsd8x50.c

@@ -89,6 +89,7 @@ static struct msm_otg_platform_data msm_otg_pdata = {
 };
 
 static struct platform_device *devices[] __initdata = {
+	&msm_device_gpio_8x50,
 	&msm_device_uart3,
 	&msm_device_smd,
 	&msm_device_otg,

arch/arm/mach-msm/board-trout.c

@@ -36,6 +36,7 @@
 extern int trout_init_mmc(unsigned int);
 
 static struct platform_device *devices[] __initdata = {
+	&msm_device_gpio_7201,
 	&msm_device_uart3,
 	&msm_device_smd,
 	&msm_device_nand,

arch/arm/mach-msm/devices-msm7x00.c

@@ -29,6 +29,37 @@
 #include "clock-pcom.h"
 #include <linux/platform_data/mmc-msm_sdcc.h>
 
+static struct resource msm_gpio_resources[] = {
+	{
+		.start	= 32 + 0,
+		.end	= 32 + 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 32 + 1,
+		.end	= 32 + 1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 0xa9200800,
+		.end	= 0xa9200800 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name  = "gpio1"
+	},
+	{
+		.start	= 0xa9300C00,
+		.end	= 0xa9300C00 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name  = "gpio2"
+	},
+};
+
+struct platform_device msm_device_gpio_7201 = {
+	.name	= "gpio-msm-7201",
+	.num_resources	= ARRAY_SIZE(msm_gpio_resources),
+	.resource	= msm_gpio_resources,
+};
+
 static struct resource resources_uart1[] = {
 	{
 		.start	= INT_UART1,

arch/arm/mach-msm/devices-msm7x30.c

@@ -33,6 +33,37 @@
 
 #include <linux/platform_data/mmc-msm_sdcc.h>
 
+static struct resource msm_gpio_resources[] = {
+	{
+		.start	= 32 + 18,
+		.end	= 32 + 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 32 + 19,
+		.end	= 32 + 19,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 0xac001000,
+		.end	= 0xac001000 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name  = "gpio1"
+	},
+	{
+		.start	= 0xac101400,
+		.end	= 0xac101400 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name  = "gpio2"
+	},
+};
+
+struct platform_device msm_device_gpio_7x30 = {
+	.name	= "gpio-msm-7x30",
+	.num_resources	= ARRAY_SIZE(msm_gpio_resources),
+	.resource	= msm_gpio_resources,
+};
+
 static struct resource resources_uart2[] = {
 	{
 		.start	= INT_UART2,

arch/arm/mach-msm/devices-qsd8x50.c

@@ -30,6 +30,37 @@
 #include <linux/platform_data/mmc-msm_sdcc.h>
 #include "clock-pcom.h"
 
+static struct resource msm_gpio_resources[] = {
+	{
+		.start	= 64 + 165 + 9,
+		.end	= 64 + 165 + 9,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 64 + 165 + 10,
+		.end	= 64 + 165 + 10,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 0xa9000800,
+		.end	= 0xa9000800 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name  = "gpio1"
+	},
+	{
+		.start	= 0xa9100C00,
+		.end	= 0xa9100C00 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name  = "gpio2"
+	},
+};
+
+struct platform_device msm_device_gpio_8x50 = {
+	.name	= "gpio-msm-8x50",
+	.num_resources	= ARRAY_SIZE(msm_gpio_resources),
+	.resource	= msm_gpio_resources,
+};
+
 static struct resource resources_uart3[] = {
 	{
 		.start	= INT_UART3,

arch/arm/mach-msm/devices.h

@@ -20,6 +20,10 @@
 
 #include "clock.h"
 
+extern struct platform_device msm_device_gpio_7201;
+extern struct platform_device msm_device_gpio_7x30;
+extern struct platform_device msm_device_gpio_8x50;
+
 extern struct platform_device msm_device_uart1;
 extern struct platform_device msm_device_uart2;
 extern struct platform_device msm_device_uart3;

arch/arm/mach-msm/dma.c

@@ -19,9 +19,35 @@
 #include <linux/interrupt.h>
 #include <linux/completion.h>
 #include <mach/dma.h>
+#include <mach/msm_iomap.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
 
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define DMOV_SD_AARM DMOV_SD2
+#else
+#define DMOV_SD_AARM DMOV_SD3
+#endif
+
+#define DMOV_CMD_PTR(ch)      DMOV_SD_AARM(0x000, ch)
+#define DMOV_RSLT(ch)         DMOV_SD_AARM(0x040, ch)
+#define DMOV_FLUSH0(ch)       DMOV_SD_AARM(0x080, ch)
+#define DMOV_FLUSH1(ch)       DMOV_SD_AARM(0x0C0, ch)
+#define DMOV_FLUSH2(ch)       DMOV_SD_AARM(0x100, ch)
+#define DMOV_FLUSH3(ch)       DMOV_SD_AARM(0x140, ch)
+#define DMOV_FLUSH4(ch)       DMOV_SD_AARM(0x180, ch)
+#define DMOV_FLUSH5(ch)       DMOV_SD_AARM(0x1C0, ch)
+
+#define DMOV_STATUS(ch)       DMOV_SD_AARM(0x200, ch)
+#define DMOV_ISR              DMOV_SD_AARM(0x380, 0)
+
+#define DMOV_CONFIG(ch)       DMOV_SD_AARM(0x300, ch)
+
 enum {
 	MSM_DMOV_PRINT_ERRORS = 1,
 	MSM_DMOV_PRINT_IO = 2,