Merge branch 'fixes' into next/cleanup

Merging in fixes since there's a conflict in the omap4 clock tables caused by
it.

* fixes: (245 commits)
  ARM: highbank: fix cache flush ordering for cpu hotplug
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
  arm: mvebu: Fix the irq map function in SMP mode
  Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
  ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
  ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
  ARM i.MX6: Fix ldb_di clock selection
  ARM: imx: provide twd clock lookup from device tree
  ARM: imx35 Bugfix admux clock
  ARM: clk-imx35: Bugfix iomux clock
  + Linux 3.9-rc6

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-omap2/cclock44xx_data.c

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
     power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
-    power_save_controller - Support runtime D3 of HD-audio controller
-		(-1 = on for supported chip (default), false = off,
-		 true = force to on even for unsupported hardware)
+    power_save_controller - Reset HD-audio controller in power-saving mode
+		(default = on)
     align_buffer_size - Force rounding of buffer/period sizes to multiples
     		      of 128 bytes. This is more efficient in terms of memory
 		      access but isn't required by the HDA spec and prevents

MAINTAINERS

@@ -4941,6 +4941,12 @@ W:	logfs.org
 S:	Maintained
 F:	fs/logfs/
 
+LPC32XX MACHINE SUPPORT
+M:	Roland Stigge <stigge@antcom.de>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-lpc32xx/
+
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
 M:	Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
 M:	Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
@@ -5065,9 +5071,8 @@ S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
 
 MARVELL LIBERTAS WIRELESS DRIVER
-M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
@@ -5569,6 +5574,7 @@ F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 
 NETXEN (1/10) GbE SUPPORT
+M:	Manish Chopra <manish.chopra@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
 L:	netdev@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/alpha/Makefile

@@ -12,7 +12,7 @@ NM := $(NM) -B
 
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
-cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4

arch/alpha/include/asm/floppy.h

@@ -26,7 +26,7 @@
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
 #define fd_cacheflush(addr,size) /* nothing */
 #define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
-					    IRQF_DISABLED, "floppy", NULL)
+					    0, "floppy", NULL)
 #define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL)
 
 #ifdef CONFIG_PCI

arch/alpha/kernel/irq.c

@@ -117,13 +117,6 @@ handle_irq(int irq)
 		return;
 	}
 
-	/*
-	 * From here we must proceed with IPL_MAX. Note that we do not
-	 * explicitly enable interrupts afterwards - some MILO PALcode
-	 * (namely LX164 one) seems to have severe problems with RTI
-	 * at IPL 0.
-	 */
-	local_irq_disable();
 	irq_enter();
 	generic_handle_irq_desc(irq, desc);
 	irq_exit();

arch/alpha/kernel/irq_alpha.c

@@ -45,6 +45,14 @@ do_entInt(unsigned long type, unsigned long vector,
 	  unsigned long la_ptr, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
+
+	/*
+	 * Disable interrupts during IRQ handling.
+	 * Note that there is no matching local_irq_enable() due to
+	 * severe problems with RTI at IPL0 and some MILO PALcode
+	 * (namely LX164).
+	 */
+	local_irq_disable();
 	switch (type) {
 	case 0:
 #ifdef CONFIG_SMP
@@ -62,7 +70,6 @@ do_entInt(unsigned long type, unsigned long vector,
 	  {
 		long cpu;
 
-		local_irq_disable();
 		smp_percpu_timer_interrupt(regs);
 		cpu = smp_processor_id();
 		if (cpu != boot_cpuid) {
@@ -222,7 +229,6 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 
 struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
 	.name		= "timer",
 };
 

arch/alpha/kernel/sys_nautilus.c

@@ -188,6 +188,10 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 extern void free_reserved_mem(void *, void *);
 extern void pcibios_claim_one_bus(struct pci_bus *);
 
+static struct resource irongate_io = {
+	.name	= "Irongate PCI IO",
+	.flags	= IORESOURCE_IO,
+};
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -209,6 +213,7 @@ nautilus_init_pci(void)
 
 	irongate = pci_get_bus_and_slot(0, 0);
 	bus->self = irongate;
+	bus->resource[0] = &irongate_io;
 	bus->resource[1] = &irongate_mem;
 
 	pci_bus_size_bridges(bus);

arch/alpha/kernel/sys_titan.c

@@ -280,15 +280,15 @@ titan_late_init(void)
 	 * all reported to the kernel as machine checks, so the handler
 	 * is a nop so it can be called to count the individual events.
 	 */
-	titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(63+16, titan_intr_nop, 0,
 		    "CChip Error", NULL);
-	titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(62+16, titan_intr_nop, 0,
 		    "PChip 0 H_Error", NULL);
-	titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(61+16, titan_intr_nop, 0,
 		    "PChip 1 H_Error", NULL);
-	titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(60+16, titan_intr_nop, 0,
 		    "PChip 0 C_Error", NULL);
-	titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(59+16, titan_intr_nop, 0,
 		    "PChip 1 C_Error", NULL);
 
 	/* 
@@ -348,9 +348,9 @@ privateer_init_pci(void)
 	 * Hook a couple of extra err interrupts that the
 	 * common titan code won't.
 	 */
-	titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(53+16, titan_intr_nop, 0,
 		    "NMI", NULL);
-	titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(50+16, titan_intr_nop, 0,
 		    "Temperature Warning", NULL);
 
 	/*

arch/arm/Kconfig

@@ -1175,9 +1175,9 @@ config ARM_NR_BANKS
 	default 8
 
 config IWMMXT
-	bool "Enable iWMMXt support"
+	bool "Enable iWMMXt support" if !CPU_PJ4
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1431,6 +1431,16 @@ config ARM_ERRATA_775420
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
 
+config ARM_ERRATA_798181
+	bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+	depends on CPU_V7 && SMP
+	help
+	  On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+	  adequately shooting down all use of the old entries. This
+	  option enables the Linux kernel workaround for this erratum
+	  which sends an IPI to the CPUs that are running the same ASID
+	  as the one being invalidated.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -54,7 +54,7 @@
 		};
 
 		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins2>;
+			pinctrl-0 = <&sdio_pins3>;
 			pinctrl-names = "default";
 			status = "okay";
 			/*

arch/arm/boot/dts/armada-370.dtsi

@@ -59,6 +59,12 @@
 					     "mpp50", "mpp51", "mpp52";
 			      marvell,function = "sd0";
 			};
+
+			sdio_pins3: sdio-pins3 {
+			      marvell,pins = "mpp48", "mpp49", "mpp50",
+					     "mpp51", "mpp52", "mpp53";
+			      marvell,function = "sd0";
+			};
 	        };
 
 		gpio0: gpio@d0018100 {

arch/arm/boot/dts/dbx5x0.dtsi

@@ -191,8 +191,8 @@
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>;
-			reg-names = "prcmu";
+			reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;

arch/arm/boot/dts/imx28-m28evk.dts

@@ -152,7 +152,6 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
 				status = "okay";
 
 				sgtl5000: codec@0a {

arch/arm/boot/dts/imx28-sps1.dts

@@ -70,7 +70,6 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
 				status = "okay";
 
 				rtc: rtc@51 {

arch/arm/boot/dts/imx6qdl.dtsi

@@ -91,6 +91,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
+			clocks = <&clks 15>;
 		};
 
 		L2: l2-cache@00a02000 {

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -77,6 +77,7 @@
 		};
 
 		nand@3000000 {
+			chip-delay = <40>;
 			status = "okay";
 
 			partition@0 {

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -96,11 +96,11 @@
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp44";
+				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp45";
+				marvell,pins = "mpp47";
 				marvell,function = "gpio";
 			};
 
@@ -157,14 +157,14 @@
 			gpios = <&gpio0 16 0>;
 			linux,default-trigger = "default-on";
 		};
-		health_led1 {
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 0>;
+		};
+		health_led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 0>;
 		};
-		health_led2 {
-			label = "status:white:health_led";
-			gpios = <&gpio1 4 0>;
-		};
 		backup_led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 0>;

arch/arm/boot/dts/orion5x.dtsi

@@ -13,6 +13,9 @@
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;
 
+	aliases {
+		gpio0 = &gpio0;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -32,7 +35,9 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <6>, <7>, <8>, <9>;
 		};
 
@@ -91,7 +96,7 @@
 			reg = <0x90000 0x10000>,
 			      <0xf2200000 0x800>;
 			reg-names = "regs", "sram";
-			interrupts = <22>;
+			interrupts = <28>;
 			status = "okay";
 		};
 	};

arch/arm/include/asm/delay.h

@@ -24,7 +24,7 @@ extern struct arm_delay_ops {
 	void (*delay)(unsigned long);
 	void (*const_udelay)(unsigned long);
 	void (*udelay)(unsigned long);
-	bool const_clock;
+	unsigned long ticks_per_jiffy;
 } arm_delay_ops;
 
 #define __delay(n)		arm_delay_ops.delay(n)

arch/arm/include/asm/highmem.h

@@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page);
 #endif
 #endif
 
+/*
+ * Needed to be able to broadcast the TLB invalidation for kmap.
+ */
+#ifdef CONFIG_ARM_ERRATA_798181
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#endif
+
 #ifdef ARCH_NEEDS_KMAP_HIGH_GET
 extern void *kmap_high_get(struct page *page);
 #else

arch/arm/include/asm/mmu_context.h

@@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm);
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
 #define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
 
+DECLARE_PER_CPU(atomic64_t, active_asids);
+
 #else	/* !CONFIG_CPU_HAS_ASID */
 
 #ifdef CONFIG_MMU

arch/arm/include/asm/tlbflush.h

@@ -450,6 +450,21 @@ static inline void local_flush_bp_all(void)
 		isb();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+	/*
+	 * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
+	 */
+	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+	dsb();
+}
+#else
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+}
+#endif
+
 /*
  *	flush_pmd_entry
  *

arch/arm/kernel/entry-common.S

@@ -276,7 +276,13 @@ ENDPROC(ftrace_graph_caller_old)
  */
 
 .macro mcount_enter
+/*
+ * This pad compensates for the push {lr} at the call site.  Note that we are
+ * unable to unwind through a function which does not otherwise save its lr.
+ */
+ UNWIND(.pad	#4)
 	stmdb	sp!, {r0-r3, lr}
+ UNWIND(.save	{r0-r3, lr})
 .endm
 
 .macro mcount_get_lr reg
@@ -289,6 +295,7 @@ ENDPROC(ftrace_graph_caller_old)
 .endm
 
 ENTRY(__gnu_mcount_nc)
+UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
 	mov	ip, lr
 	ldmia	sp!, {lr}
@@ -296,17 +303,22 @@ ENTRY(__gnu_mcount_nc)
 #else
 	__mcount
 #endif
+UNWIND(.fnend)
 ENDPROC(__gnu_mcount_nc)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller)
+UNWIND(.fnstart)
 	__ftrace_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_caller)
 #endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
+UNWIND(.fnstart)
 	__ftrace_graph_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_graph_caller)
 #endif
 

arch/arm/kernel/head.S

@@ -267,7 +267,7 @@ __create_page_tables:
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
-#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
 	sub	r4, r4, #4			@ Fixup page table pointer
 						@ for 64-bit descriptors
 #endif

arch/arm/kernel/hw_breakpoint.c

@@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused)
 	}
 
 	if (err) {
-		pr_warning("CPU %d debug is powered down!\n", cpu);
+		pr_warn_once("CPU %d debug is powered down!\n", cpu);
 		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
 		return;
 	}
@@ -987,7 +987,7 @@ clear_vcr:
 	isb();
 
 	if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-		pr_warning("CPU %d failed to disable vector catch\n", cpu);
+		pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
 		return;
 	}
 
@@ -1007,7 +1007,7 @@ clear_vcr:
 	}
 
 	if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-		pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
+		pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
 		return;
 	}
 

arch/arm/kernel/setup.c

@@ -353,6 +353,23 @@ void __init early_print(const char *str, ...)
 	printk("%s", buf);
 }
 
+static void __init cpuid_init_hwcaps(void)
+{
+	unsigned int divide_instrs;
+
+	if (cpu_architecture() < CPU_ARCH_ARMv7)
+		return;
+
+	divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
+
+	switch (divide_instrs) {
+	case 2:
+		elf_hwcap |= HWCAP_IDIVA;
+	case 1:
+		elf_hwcap |= HWCAP_IDIVT;
+	}
+}
+
 static void __init feat_v6_fixup(void)
 {
 	int id = read_cpuid_id();
@@ -483,8 +500,11 @@ static void __init setup_processor(void)
 	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
 		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
+
+	cpuid_init_hwcaps();
+
 #ifndef CONFIG_ARM_THUMB
-	elf_hwcap &= ~HWCAP_THUMB;
+	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
 #endif
 
 	feat_v6_fixup();
@@ -524,7 +544,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
 
-#ifndef CONFIG_LPAE
+#ifndef CONFIG_ARM_LPAE
 	if (bank->start + size < bank->start) {
 		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
 			"32-bit physical address space\n", (long long)start);

arch/arm/kernel/smp.c

@@ -673,9 +673,6 @@ static int cpufreq_callback(struct notifier_block *nb,
 	if (freq->flags & CPUFREQ_CONST_LOOPS)
 		return NOTIFY_OK;
 
-	if (arm_delay_ops.const_clock)
-		return NOTIFY_OK;
-
 	if (!per_cpu(l_p_j_ref, cpu)) {
 		per_cpu(l_p_j_ref, cpu) =
 			per_cpu(cpu_data, cpu).loops_per_jiffy;

arch/arm/kernel/smp_tlb.c

@@ -12,6 +12,7 @@
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
 
 /**********************************************************************/
 
@@ -69,12 +70,72 @@ static inline void ipi_flush_bp_all(void *ignored)
 	local_flush_bp_all();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static int erratum_a15_798181(void)
+{
+	unsigned int midr = read_cpuid_id();
+
+	/* Cortex-A15 r0p0..r3p2 affected */
+	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+		return 0;
+	return 1;
+}
+#else
+static int erratum_a15_798181(void)
+{
+	return 0;
+}
+#endif
+
+static void ipi_flush_tlb_a15_erratum(void *arg)
+{
+	dmb();
+}
+
+static void broadcast_tlb_a15_erratum(void)
+{
+	if (!erratum_a15_798181())
+		return;
+
+	dummy_flush_tlb_a15_erratum();
+	smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
+			       NULL, 1);
+}
+
+static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
+{
+	int cpu;
+	cpumask_t mask = { CPU_BITS_NONE };
+
+	if (!erratum_a15_798181())
+		return;
+
+	dummy_flush_tlb_a15_erratum();
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		/*
+		 * We only need to send an IPI if the other CPUs are running
+		 * the same ASID as the one being invalidated. There is no
+		 * need for locking around the active_asids check since the
+		 * switch_mm() function has at least one dmb() (as required by
+		 * this workaround) in case a context switch happens on
+		 * another CPU after the condition below.
+		 */
+		if (atomic64_read(&mm->context.id) ==
+		    atomic64_read(&per_cpu(active_asids, cpu)))
+			cpumask_set_cpu(cpu, &mask);
+	}
+	smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
+}
+
 void flush_tlb_all(void)
 {
 	if (tlb_ops_need_broadcast())
 		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
 	else
 		local_flush_tlb_all();
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
@@ -83,6 +144,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 		on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
 	else
 		local_flush_tlb_mm(mm);
+	broadcast_tlb_mm_a15_erratum(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -95,6 +157,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 					&ta, 1);
 	} else
 		local_flush_tlb_page(vma, uaddr);
+	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -105,6 +168,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
 	} else
 		local_flush_tlb_kernel_page(kaddr);
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
@@ -119,6 +183,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 					&ta, 1);
 	} else
 		local_flush_tlb_range(vma, start, end);
+	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -130,6 +195,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
 	} else
 		local_flush_tlb_kernel_range(start, end);
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_bp_all(void)

arch/arm/kvm/vgic.c

@@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 			  lr, irq, vgic_cpu->vgic_lr[lr]);
 		BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
 		vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
-
-		goto out;
+		return true;
 	}
 
 	/* Try to use another LR for this interrupt */
@@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 	vgic_cpu->vgic_irq_lr_map[irq] = lr;
 	set_bit(lr, vgic_cpu->lr_used);
 
-out:
 	if (!vgic_irq_is_edge(vcpu, irq))
 		vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
 
@@ -1018,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 
 	kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
 
-	/*
-	 * We do not need to take the distributor lock here, since the only
-	 * action we perform is clearing the irq_active_bit for an EOIed
-	 * level interrupt.  There is a potential race with
-	 * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
-	 * check if the interrupt is already active. Two possibilities:
-	 *
-	 * - The queuing is occurring on the same vcpu: cannot happen,
-	 *   as we're already in the context of this vcpu, and
-	 *   executing the handler
-	 * - The interrupt has been migrated to another vcpu, and we
-	 *   ignore this interrupt for this run. Big deal. It is still
-	 *   pending though, and will get considered when this vcpu
-	 *   exits.
-	 */
 	if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
 		/*
 		 * Some level interrupts have been EOIed. Clear their
@@ -1054,6 +1037,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 			} else {
 				vgic_cpu_irq_clear(vcpu, irq);
 			}
+
+			/*
+			 * Despite being EOIed, the LR may not have
+			 * been marked as empty.
+			 */
+			set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
+			vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
 		}
 	}
 
@@ -1064,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 }
 
 /*
- * Sync back the VGIC state after a guest run. We do not really touch
- * the distributor here (the irq_pending_on_cpu bit is safe to set),
- * so there is no need for taking its lock.
+ * Sync back the VGIC state after a guest run. The distributor lock is
+ * needed so we don't get preempted in the middle of the state processing.
  */
 static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
@@ -1112,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 
 void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
 	if (!irqchip_in_kernel(vcpu->kvm))
 		return;
 
+	spin_lock(&dist->lock);
 	__kvm_vgic_sync_hwstate(vcpu);
+	spin_unlock(&dist->lock);
 }
 
 int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)

arch/arm/lib/delay.c

@@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles)
 static void __timer_const_udelay(unsigned long xloops)
 {
 	unsigned long long loops = xloops;
-	loops *= loops_per_jiffy;
+	loops *= arm_delay_ops.ticks_per_jiffy;
 	__timer_delay(loops >> UDELAY_SHIFT);
 }
 
@@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
 		pr_info("Switching to timer-based delay loop\n");
 		delay_timer			= timer;
 		lpj_fine			= timer->freq / HZ;
-		loops_per_jiffy			= lpj_fine;
+
+		/* cpufreq may scale loops_per_jiffy, so keep a private copy */
+		arm_delay_ops.ticks_per_jiffy	= lpj_fine;
 		arm_delay_ops.delay		= __timer_delay;
 		arm_delay_ops.const_udelay	= __timer_const_udelay;
 		arm_delay_ops.udelay		= __timer_udelay;
-		arm_delay_ops.const_clock	= true;
+
 		delay_calibrated		= true;
 	} else {
 		pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");

arch/arm/mach-cns3xxx/core.c

@@ -22,19 +22,9 @@
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
-		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,

arch/arm/mach-cns3xxx/include/mach/cns3xxx.h

@@ -94,10 +94,10 @@
 #define RTC_INTR_STS_OFFSET			0x34
 
 #define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
 
 #define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT			0xFB001000
 
 #define PM_CLK_GATE_OFFSET			0x00
 #define PM_SOFT_RST_OFFSET			0x04
@@ -109,7 +109,7 @@
 #define PM_PLL_HM_PD_OFFSET			0x1C
 
 #define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
 #define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
@@ -130,7 +130,7 @@
 #define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
 
 #define TIMER1_COUNTER_OFFSET			0x00
 #define TIMER1_AUTO_RELOAD_OFFSET		0x04
@@ -227,16 +227,16 @@
  * Testchip peripheral and fpga gic regions
  */
 #define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
 
 #define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
 
 #define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
 
 #define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
 #define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000

arch/arm/mach-ep93xx/include/mach/uncompress.h

@@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 
 static inline void putc(int c)
 {
-	/* Transmit fifo not full?  */
-	while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
-		;
+	int i;
+
+	for (i = 0; i < 10000; i++) {
+		/* Transmit fifo not full? */
+		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+			break;
+	}
 
 	__raw_writeb(c, PHYS_UART_DATA);
 }

arch/arm/mach-highbank/hotplug.c

@@ -28,13 +28,11 @@ extern void secondary_startup(void);
  */
 void __ref highbank_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
-
 	highbank_set_cpu_jump(cpu, phys_to_virt(0));
-	highbank_set_core_pwr();
 
-	cpu_do_idle();
+	flush_cache_louis();
+	highbank_set_core_pwr();
 
-	/* We should never return from idle */
-	panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
+	while (1)
+		cpu_do_idle();
 }

arch/arm/mach-imx/clk-imx35.c

@@ -257,6 +257,7 @@ int __init mx35_clocks_init(void)
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+	clk_register_clkdev(clk[admux_gate], "audmux", NULL);
 
 	clk_prepare_enable(clk[spba_gate]);
 	clk_prepare_enable(clk[gpio1_gate]);
@@ -265,6 +266,7 @@ int __init mx35_clocks_init(void)
 	clk_prepare_enable(clk[iim_gate]);
 	clk_prepare_enable(clk[emi_gate]);
 	clk_prepare_enable(clk[max_gate]);
+	clk_prepare_enable(clk[iomuxc_gate]);
 
 	/*
 	 * SCC is needed to boot via mmc after a watchdog reset. The clock code

arch/arm/mach-imx/clk-imx6q.c

@@ -115,7 +115,7 @@ static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m"
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
 static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
 static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
 static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
 static const char *ipu1_di0_sels[]	= { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu1_di1_sels[]	= { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
@@ -443,7 +443,6 @@ int __init mx6q_clocks_init(void)
 
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[twd], NULL, "smp_twd");
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);

arch/arm/mach-imx/common.h

@@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *);
 
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
 extern void v7_cpu_resume(void);
 #ifdef CONFIG_SMP
 extern void v7_secondary_startup(void);

arch/arm/mach-imx/hotplug.c

@@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
+	/*
+	 * We use the cpu jumping argument register to sync with
+	 * imx_cpu_kill() which is running on cpu0 and waiting for
+	 * the register being cleared to kill the cpu.
+	 */
+	imx_set_cpu_arg(cpu, ~0);
 	cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
 {
+	unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+	while (imx_get_cpu_arg(cpu) == 0)
+		if (time_after(jiffies, timeout))
+			return 0;
 	imx_enable_cpu(cpu, false);
+	imx_set_cpu_arg(cpu, 0);
 	return 1;
 }

arch/arm/mach-imx/src.c

@@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
 		       src_base + SRC_GPR1 + cpu * 8);
 }
 
+u32 imx_get_cpu_arg(int cpu)
+{
+	cpu = cpu_logical_map(cpu);
+	return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+	cpu = cpu_logical_map(cpu);
+	writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
 void imx_src_prepare_restart(void)
 {
 	u32 val;

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

@@ -20,10 +20,15 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
 	.duplex         = DUPLEX_FULL,
 };
 
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
+};
+
 void __init iomega_ix2_200_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
 }

arch/arm/mach-kirkwood/guruplug-setup.c

@@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = {
 
 static struct mvsdio_platform_data guruplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
+	.gpio_card_detect = -1,
+	.gpio_write_protect = -1,
 };
 
 static struct gpio_led guruplug_led_pins[] = {

arch/arm/mach-kirkwood/openrd-setup.c

@@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = {
 
 static struct mvsdio_platform_data openrd_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+	.gpio_write_protect = -1,
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 
 static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
 	.gpio_card_detect = 28,
+	.gpio_write_protect = -1,
 };
 
 static unsigned int rd88f6281_mpp_config[] __initdata = {

arch/arm/mach-msm/timer.c

@@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles,
 {
 	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
 
-	writel_relaxed(0, event_base + TIMER_CLEAR);
+	ctrl &= ~TIMER_ENABLE_EN;
+	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+	writel_relaxed(ctrl, event_base + TIMER_CLEAR);
 	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
 	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
 	return 0;

arch/arm/mach-mvebu/irq-armada-370-xp.c

@@ -44,6 +44,8 @@
 
 #define ARMADA_370_XP_MAX_PER_CPU_IRQS		(28)
 
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ	(5)
+
 #define ACTIVE_DOORBELLS			(8)
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -59,36 +61,26 @@ static struct irq_domain *armada_370_xp_mpic_domain;
  */
 static void armada_370_xp_irq_mask(struct irq_data *d)
 {
-#ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
 	else
 		writel(hwirq, per_cpu_int_base +
 				ARMADA_370_XP_INT_SET_MASK_OFFS);
-#else
-	writel(irqd_to_hwirq(d),
-	       per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
-#endif
 }
 
 static void armada_370_xp_irq_unmask(struct irq_data *d)
 {
-#ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	else
 		writel(hwirq, per_cpu_int_base +
 				ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-#else
-	writel(irqd_to_hwirq(d),
-	       per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-#endif
 }
 
 #ifdef CONFIG_SMP
@@ -144,10 +136,14 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 				      unsigned int virq, irq_hw_number_t hw)
 {
 	armada_370_xp_irq_mask(irq_get_irq_data(virq));
-	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
+	if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
+		writel(hw, per_cpu_int_base +
+			ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+	else
+		writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	irq_set_status_flags(virq, IRQ_LEVEL);
 
-	if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+	if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
 		irq_set_percpu_devid(virq);
 		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
 					handle_percpu_devid_irq);

arch/arm/mach-omap1/clock_data.c

@@ -538,15 +538,6 @@ static struct clk usb_hhc_ck16xx = {
 };
 
 static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
 	.name		= "usb_dc_ck",
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
@@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX | CK_7XX),
 	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
 	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),

arch/arm/mach-omap2/cclock44xx_data.c

@@ -52,6 +52,13 @@
  */
 #define OMAP4_DPLL_ABE_DEFFREQ				98304000
 
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ				960000000
+
 /* Root clocks */
 
 DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
 		    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
 		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
 
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+		OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+		OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
 DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
 		OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
 		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1549,6 +1560,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"per_mcbsp4_gfclk",		&per_mcbsp4_gfclk),
 	CLK(NULL,	"hsmmc1_fclk",			&hsmmc1_fclk),
 	CLK(NULL,	"hsmmc2_fclk",			&hsmmc2_fclk),
+	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m),
 	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck),
 	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1),
 	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0),
@@ -1706,5 +1718,13 @@ int __init omap4xxx_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
 	return 0;
 }

arch/arm/mach-omap2/common.h

@@ -293,5 +293,8 @@ extern void omap_reserve(void);
 struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

arch/arm/mach-omap2/io.c

@@ -54,6 +54,12 @@
 #include "prm3xxx.h"
 #include "prm44xx.h"
 
+/*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -397,7 +403,7 @@ void __init omap2420_init_early(void)
 	omap242x_clockdomains_init();
 	omap2420_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2420_clk_init();
+	omap_clk_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -427,7 +433,7 @@ void __init omap2430_init_early(void)
 	omap243x_clockdomains_init();
 	omap2430_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2430_clk_init();
+	omap_clk_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -462,7 +468,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -500,7 +506,7 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -568,7 +574,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	am33xx_clk_init();
+	omap_clk_init = am33xx_clk_init;
 }
 #endif
 
@@ -593,7 +599,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap4xxx_clk_init();
+	omap_clk_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)

arch/arm/mach-omap2/omap_hwmod.c

@@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		} else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
 			idlemode = HWMOD_IDLEMODE_NO;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+		    (oh->flags & HWMOD_FORCE_MSTANDBY)) {
 			idlemode = HWMOD_IDLEMODE_FORCE;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)

arch/arm/mach-omap2/omap_hwmod.h

@@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
  *
  * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
  *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ *     out of standby, rather than relying on module smart-standby
  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
  *     XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
  *     correctly, or this is being abused to deal with some PM latency
  *     issues -- but we're currently suffering from a shortage of
  *     folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ *     is kept in force-standby mode. Failing to do so causes PM problems
+ *     with musb on OMAP3630 at least. Note that musb has a dedicated register
+ *     to control MSTANDBY signal when MIDLEMODE is set to force-standby.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_16BIT_REG				(1 << 8)
 #define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 #define HWMOD_BLOCK_WFI				(1 << 10)
+#define HWMOD_FORCE_MSTANDBY			(1 << 11)
 
 /*
  * omap_hwmod._int_flags definitions

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
 	 * broken when autoidle is enabled
 	 * workaround is to disable the autoidle bit at module level.
+	 *
+	 * Enabling the device in any other MIDLEMODE setting but force-idle
+	 * causes core_pwrdm not enter idle states at least on OMAP3630.
+	 * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+	 * signal when MIDLEMODE is set to force-idle.
 	 */
 	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
-				| HWMOD_SWSUP_MSTANDBY,
+				| HWMOD_FORCE_MSTANDBY,
 };
 
 /* usb_otg_hs */

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2719,7 +2719,17 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
 	.class		= &omap44xx_ocp2scp_hwmod_class,
 	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "func_48m_fclk",
+	/*
+	 * ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP
+	 * block as an "optional clock," and normally should never be
+	 * specified as the main_clk for an OMAP IP block.  However it
+	 * turns out that this clock is actually the main clock for
+	 * the ocp2scp_usb_phy IP block:
+	 * http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html
+	 * So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems
+	 * to be the best workaround.
+	 */
+	.main_clk	= "ocp2scp_usb_phy_phy_48m",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,

arch/arm/mach-omap2/timer.c

@@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void)
 			       clksrc_nr, clksrc_src)			\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);	\
@@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void)			\
 				clksrc_nr, clksrc_src)			\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\

arch/arm/mach-s3c24xx/include/mach/irqs.h

@@ -188,10 +188,8 @@
 
 #if defined(CONFIG_CPU_S3C2416)
 #define NR_IRQS (IRQ_S3C2416_I2S1 + 1)
-#elif defined(CONFIG_CPU_S3C2443)
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#define NR_IRQS (IRQ_S3C2443_AC97 + 1)
 #endif
 
 /* compatibility define. */

arch/arm/mach-s3c24xx/irq.c

@@ -499,7 +499,7 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
 		base = (void *)0xfd000000;
 
 		intc->reg_mask = base + 0xa4;
-		intc->reg_pending = base + 0x08;
+		intc->reg_pending = base + 0xa8;
 		irq_num = 20;
 		irq_start = S3C2410_IRQ(32);
 		irq_offset = 4;

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi0_data = {
-	.ios_handler	= mop500_sdi0_ios_handler,
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA |

arch/arm/mach-ux500/board-mop500.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-nomadik.h>
@@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev)
 	regulator_put(prox_regulator);
 }
 
+void mop500_snowball_ethernet_clock_enable(void)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys("fsmc", NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
 				.dir = STEDMA40_MEM_TO_PERIPH,
@@ -683,6 +693,8 @@ static void __init snowball_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
+	mop500_snowball_ethernet_clock_enable();
+
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }

arch/arm/mach-ux500/board-mop500.h

@@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,

arch/arm/mach-ux500/cpu-db8500.c

@@ -312,9 +312,10 @@ static void __init u8500_init_machine(void)
 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
 		mop500_pinmaps_init();
-	else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
-	else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+		mop500_snowball_ethernet_clock_enable();
+	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
 		/* TODO: Add pinmaps for ccu9540 board. */

arch/arm/mm/cache-l2x0.c

@@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id)
 	int lockregs;
 	int i;
 
-	switch (cache_id) {
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
 		lockregs = 8;
 		break;
@@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	if (cache_id_part_number_from_dt)
 		cache_id = cache_id_part_number_from_dt;
 	else
-		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
-			& L2X0_CACHE_ID_PART_MASK;
+		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
 	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
 
 	aux &= aux_mask;
 	aux |= aux_val;
 
 	/* Determine the number of ways */
-	switch (cache_id) {
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
 		if (aux & (1 << 16))
 			ways = 16;
@@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = {
 		.flush_all   = l2x0_flush_all,
 		.inv_all     = l2x0_inv_all,
 		.disable     = l2x0_disable,
-		.set_debug   = pl310_set_debug,
 	},
 };
 
@@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 		data->save();
 
 	of_init = true;
-	l2x0_init(l2x0_base, aux_val, aux_mask);
-
 	memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
+	l2x0_init(l2x0_base, aux_val, aux_mask);
 
 	return 0;
 }

arch/arm/mm/context.c

@@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
 static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
 static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
 
-static DEFINE_PER_CPU(atomic64_t, active_asids);
+DEFINE_PER_CPU(atomic64_t, active_asids);
 static DEFINE_PER_CPU(u64, reserved_asids);
 static cpumask_t tlb_flush_pending;
 
@@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
 		local_flush_bp_all();
 		local_flush_tlb_all();
+		dummy_flush_tlb_a15_erratum();
 	}
 
 	atomic64_set(&per_cpu(active_asids, cpu), asid);

arch/arm/mm/mmu.c

@@ -598,39 +598,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
-				      unsigned long end, phys_addr_t phys,
-				      const struct mem_type *type)
+static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+			unsigned long end, phys_addr_t phys,
+			const struct mem_type *type)
 {
-	pmd_t *pmd = pmd_offset(pud, addr);
-
+#ifndef CONFIG_ARM_LPAE
 	/*
-	 * Try a section mapping - end, addr and phys must all be aligned
-	 * to a section boundary.  Note that PMDs refer to the individual
-	 * L1 entries, whereas PGDs refer to a group of L1 entries making
-	 * up one logical pointer to an L2 table.
+	 * In classic MMU format, puds and pmds are folded in to
+	 * the pgds. pmd_offset gives the PGD entry. PGDs refer to a
+	 * group of L1 entries making up one logical pointer to
+	 * an L2 table (2MB), where as PMDs refer to the individual
+	 * L1 entries (1MB). Hence increment to get the correct
+	 * offset for odd 1MB sections.
+	 * (See arch/arm/include/asm/pgtable-2level.h)
 	 */
-	if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
-		pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
-		if (addr & SECTION_SIZE)
-			pmd++;
+	if (addr & SECTION_SIZE)
+		pmd++;
 #endif
+	do {
+		*pmd = __pmd(phys | type->prot_sect);
+		phys += SECTION_SIZE;
+	} while (pmd++, addr += SECTION_SIZE, addr != end);
 
-		do {
-			*pmd = __pmd(phys | type->prot_sect);
-			phys += SECTION_SIZE;
-		} while (pmd++, addr += SECTION_SIZE, addr != end);
+	flush_pmd_entry(pmd);
+}
 
-		flush_pmd_entry(p);
-	} else {
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
+				      unsigned long end, phys_addr_t phys,
+				      const struct mem_type *type)
+{
+	pmd_t *pmd = pmd_offset(pud, addr);
+	unsigned long next;
+
+	do {
 		/*
-		 * No need to loop; pte's aren't interested in the
-		 * individual L1 entries.
+		 * With LPAE, we must loop over to map
+		 * all the pmds for the given range.
 		 */
-		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
-	}
+		next = pmd_addr_end(addr, end);
+
+		/*
+		 * Try a section mapping - addr, next and phys must all be
+		 * aligned to a section boundary.
+		 */
+		if (type->prot_sect &&
+				((addr | next | phys) & ~SECTION_MASK) == 0) {
+			map_init_section(pmd, addr, next, phys, type);
+		} else {
+			alloc_init_pte(pmd, addr, next,
+						__phys_to_pfn(phys), type);
+		}
+
+		phys += next - addr;
+
+	} while (pmd++, addr = next, addr != end);
 }
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
@@ -641,7 +662,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 
 	do {
 		next = pud_addr_end(addr, end);
-		alloc_init_section(pud, addr, next, phys, type);
+		alloc_init_pmd(pud, addr, next, phys, type);
 		phys += next - addr;
 	} while (pud++, addr = next, addr != end);
 }

arch/arm/mm/proc-v7.S

@@ -420,7 +420,7 @@ __v7_pj4b_proc_info:
 __v7_ca7mp_proc_info:
 	.long	0x410fc070
 	.long	0xff0ffff0
-	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+	__v7_proc __v7_ca7mp_setup
 	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
 
 	/*
@@ -430,9 +430,24 @@ __v7_ca7mp_proc_info:
 __v7_ca15mp_proc_info:
 	.long	0x410fc0f0
 	.long	0xff0ffff0
-	__v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+	__v7_proc __v7_ca15mp_setup
 	.size	__v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
 
+	/*
+	 * Qualcomm Inc. Krait processors.
+	 */
+	.type	__krait_proc_info, #object
+__krait_proc_info:
+	.long	0x510f0400		@ Required ID value
+	.long	0xff0ffc00		@ Mask for ID
+	/*
+	 * Some Krait processors don't indicate support for SDIV and UDIV
+	 * instructions in the ARM instruction set, even though they actually
+	 * do support them.
+	 */
+	__v7_proc __v7_setup, hwcaps = HWCAP_IDIV
+	.size	__krait_proc_info, . - __krait_proc_info
+
 	/*
 	 * Match any ARMv7 processor core.
 	 */

arch/mips/Kconfig

@@ -18,7 +18,7 @@ config MIPS
 	select HAVE_KRETPROBES
 	select HAVE_DEBUG_KMEMLEAK
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
-	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
 	select RTC_LIB if !MACH_LOONGSON
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -657,7 +657,7 @@ config SNI_RM
 	bool "SNI RM200/300/400"
 	select FW_ARC if CPU_LITTLE_ENDIAN
 	select FW_ARC32 if CPU_LITTLE_ENDIAN
-	select SNIPROM if CPU_BIG_ENDIAN
+	select FW_SNIPROM if CPU_BIG_ENDIAN
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select CEVT_R4K
@@ -1144,7 +1144,7 @@ config DEFAULT_SGI_PARTITION
 config FW_ARC32
 	bool
 
-config SNIPROM
+config FW_SNIPROM
 	bool
 
 config BOOT_ELF32
@@ -1493,7 +1493,6 @@ config CPU_XLP
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
-	select CPU_HAS_LLSC
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_HAS_PREFETCH

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -745,10 +745,7 @@ void __init board_prom_init(void)
 		strcpy(cfe_version, "unknown");
 	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
 
-	if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
-		printk(KERN_ERR PFX "invalid nvram checksum\n");
-		return;
-	}
+	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
 
 	board_name = bcm63xx_nvram_get_name();
 	/* find board by name */

arch/mips/bcm63xx/nvram.c

@@ -38,7 +38,7 @@ struct bcm963xx_nvram {
 static struct bcm963xx_nvram nvram;
 static int mac_addr_used;
 
-int __init bcm63xx_nvram_init(void *addr)
+void __init bcm63xx_nvram_init(void *addr)
 {
 	unsigned int check_len;
 	u32 crc, expected_crc;
@@ -60,9 +60,8 @@ int __init bcm63xx_nvram_init(void *addr)
 	crc = crc32_le(~0, (u8 *)&nvram, check_len);
 
 	if (crc != expected_crc)
-		return -EINVAL;
-
-	return 0;
+		pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
+			expected_crc, crc);
 }
 
 u8 *bcm63xx_nvram_get_name(void)

arch/mips/bcm63xx/setup.c

@@ -157,4 +157,4 @@ int __init bcm63xx_register_devices(void)
 	return board_register_devices();
 }
 
-device_initcall(bcm63xx_register_devices);
+arch_initcall(bcm63xx_register_devices);

arch/mips/cavium-octeon/setup.c

@@ -174,7 +174,10 @@ static int octeon_kexec_prepare(struct kimage *image)
 
 static void octeon_generic_shutdown(void)
 {
-	int cpu, i;
+	int i;
+#ifdef CONFIG_SMP
+	int cpu;
+#endif
 	struct cvmx_bootmem_desc *bootmem_desc;
 	void *named_block_array_ptr;
 

arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h

@@ -9,10 +9,8 @@
  *
  * Initialized the local nvram copy from the target address and checks
  * its checksum.
- *
- * Returns 0 on success.
  */
-int __init bcm63xx_nvram_init(void *nvram);
+void bcm63xx_nvram_init(void *nvram);
 
 /**
  * bcm63xx_nvram_get_name() - returns the board name according to nvram

arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h

@@ -28,11 +28,7 @@
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
-#ifdef CONFIG_CPU_HAS_LLSC
 #define cpu_has_llsc		1
-#else
-#define cpu_has_llsc		0
-#endif
 /* #define cpu_has_vtag_icache	? */
 /* #define cpu_has_dc_aliases	? */
 /* #define cpu_has_ic_fills_f_dc ? */

arch/mips/include/asm/mipsregs.h

@@ -1166,7 +1166,10 @@ do {									\
 	unsigned int __dspctl;						\
 									\
 	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
 	"	rddsp	%0, %x1					\n"	\
+	"	.set pop					\n"	\
 	: "=r" (__dspctl)						\
 	: "i" (mask));							\
 	__dspctl;							\
@@ -1175,30 +1178,198 @@ do {									\
 #define wrdsp(val, mask)						\
 do {									\
 	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
 	"	wrdsp	%0, %x1					\n"	\
+	"	.set pop					\n"	\
 	:								\
 	: "r" (val), "i" (mask));					\
 } while (0)
 
-#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
-#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
-#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
-#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
-
-#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
-#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
-#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
-#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
-
-#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
-#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
-#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
-#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
-
-#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
-#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
-#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
-#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+#define mflo0()								\
+({									\
+	long mflo0;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac0					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo0)); 						\
+	mflo0;								\
+})
+
+#define mflo1()								\
+({									\
+	long mflo1;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac1					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo1)); 						\
+	mflo1;								\
+})
+
+#define mflo2()								\
+({									\
+	long mflo2;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac2					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo2)); 						\
+	mflo2;								\
+})
+
+#define mflo3()								\
+({									\
+	long mflo3;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac3					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo3)); 						\
+	mflo3;								\
+})
+
+#define mfhi0()								\
+({									\
+	long mfhi0;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac0					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi0)); 						\
+	mfhi0;								\
+})
+
+#define mfhi1()								\
+({									\
+	long mfhi1;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac1					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi1)); 						\
+	mfhi1;								\
+})
+
+#define mfhi2()								\
+({									\
+	long mfhi2;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac2					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi2)); 						\
+	mfhi2;								\
+})
+
+#define mfhi3()								\
+({									\
+	long mfhi3;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac3					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi3)); 						\
+	mfhi3;								\
+})
+
+
+#define mtlo0(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac0					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo1(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac1					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo2(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac2					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo3(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac3					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi0(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac0					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi1(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac1					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi2(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac2					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi3(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac3					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
 
 #else
 

arch/mips/include/asm/signal.h

@@ -21,6 +21,6 @@
 #include <asm/sigcontext.h>
 #include <asm/siginfo.h>
 
-#define __ARCH_HAS_ODD_SIGACTION
+#define __ARCH_HAS_IRIX_SIGACTION
 
 #endif /* _ASM_SIGNAL_H */

arch/mips/include/uapi/asm/signal.h

@@ -72,6 +72,12 @@ typedef unsigned long old_sigset_t;		/* at least 32 bits */
  *
  * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
  * Unix names RESETHAND and NODEFER respectively.
+ *
+ * SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever
+ * supported its use and no libc was using it, so the entire sa-restorer
+ * functionality was removed with lmo commit 39bffc12c3580ab for 2.5.48
+ * retaining only the SA_RESTORER definition as a reminder to avoid
+ * accidental reuse of the mask bit.
  */
 #define SA_ONSTACK	0x08000000
 #define SA_RESETHAND	0x80000000
@@ -84,8 +90,6 @@ typedef unsigned long old_sigset_t;		/* at least 32 bits */
 #define SA_NOMASK	SA_NODEFER
 #define SA_ONESHOT	SA_RESETHAND
 
-#define SA_RESTORER	0x04000000	/* Only for o32 */
-
 #define MINSIGSTKSZ    2048
 #define SIGSTKSZ       8192
 

arch/mips/kernel/Makefile

@@ -100,29 +100,16 @@ obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
 #
-# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe
-# to enable DSP assembler support here even if the MIPS Release 2 CPU we
-# are targetting does not support DSP because all code-paths making use of
-# it properly check that the running CPU *actually does* support these
-# instructions.
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
+# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
+# here because the compiler may use DSP ASE instructions (such as lwx) in
+# code paths where we cannot check that the CPU we are running on supports it.
+# Proper abstraction using HAVE_AS_DSP and macros is done in
+# arch/mips/include/asm/mipsregs.h.
 #
 ifeq ($(CONFIG_CPU_MIPSR2), y)
 CFLAGS_DSP 			= -DHAVE_AS_DSP
 
-#
-# Check if assembler supports DSP ASE
-#
-ifeq ($(call cc-option-yn,-mdsp), y)
-CFLAGS_DSP			+= -mdsp
-endif
-
-#
-# Check if assembler supports DSP ASE Rev2
-#
-ifeq ($(call cc-option-yn,-mdspr2), y)
-CFLAGS_DSP			+= -mdspr2
-endif
-
 CFLAGS_signal.o			= $(CFLAGS_DSP)
 CFLAGS_signal32.o		= $(CFLAGS_DSP)
 CFLAGS_process.o		= $(CFLAGS_DSP)

arch/mips/kernel/cpu-probe.c

@@ -580,6 +580,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_VR41XX:
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->options = R4K_OPTS;
+		c->tlbsize = 32;
 		switch (c->processor_id & 0xf0) {
 		case PRID_REV_VR4111:
 			c->cputype = CPU_VR4111;
@@ -604,6 +607,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 				__cpu_name[cpu] = "NEC VR4131";
 			} else {
 				c->cputype = CPU_VR4133;
+				c->options |= MIPS_CPU_LLSC;
 				__cpu_name[cpu] = "NEC VR4133";
 			}
 			break;
@@ -613,9 +617,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			__cpu_name[cpu] = "NEC Vr41xx";
 			break;
 		}
-		set_isa(c, MIPS_CPU_ISA_III);
-		c->options = R4K_OPTS;
-		c->tlbsize = 32;
 		break;
 	case PRID_IMP_R4300:
 		c->cputype = CPU_R4300;
@@ -1226,10 +1227,8 @@ __cpuinit void cpu_probe(void)
 	if (c->options & MIPS_CPU_FPU) {
 		c->fpu_id = cpu_get_fpu_id();
 
-		if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M32R2 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R2) {
+		if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+				    MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
 			if (c->fpu_id & MIPS_FPIR_3D)
 				c->ases |= MIPS_ASE_MIPS3D;
 		}

arch/mips/kernel/linux32.c

@@ -171,7 +171,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
 		err = compat_sys_shmctl(first, second, compat_ptr(ptr));
 		break;
 	default:
-		err = -EINVAL;
+		err = -ENOSYS;
 		break;
 	}
 

arch/mips/kernel/mcount.S

@@ -46,10 +46,9 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-#else
-	PTR_ADDIU	sp, PT_SIZE
 #endif
-.endm
+	PTR_ADDIU	sp, PT_SIZE
+	.endm
 
 	.macro RETURN_BACK
 	jr ra
@@ -68,7 +67,11 @@ NESTED(ftrace_caller, PT_SIZE, ra)
 	.globl _mcount
 _mcount:
 	b	ftrace_stub
-	addiu sp,sp,8
+#ifdef CONFIG_32BIT
+	 addiu sp,sp,8
+#else
+	 nop
+#endif
 
 	/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
 	lw	t1, function_trace_stop

arch/mips/kernel/proc.c

@@ -67,7 +67,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (cpu_has_mips_r) {
 		seq_printf(m, "isa\t\t\t:");
 		if (cpu_has_mips_1)
-			seq_printf(m, "%s", "mips1");
+			seq_printf(m, "%s", " mips1");
 		if (cpu_has_mips_2)
 			seq_printf(m, "%s", " mips2");
 		if (cpu_has_mips_3)

arch/mips/kernel/traps.c

@@ -1571,7 +1571,7 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
 #ifdef CONFIG_64BIT
 	status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
 #endif
-	if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
+	if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV)
 		status_set |= ST0_XX;
 	if (cpu_has_dsp)
 		status_set |= ST0_MX;

arch/mips/lib/bitops.c

@@ -90,12 +90,12 @@ int __mips_test_and_set_bit(unsigned long nr,
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a |= mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -116,12 +116,12 @@ int __mips_test_and_set_bit_lock(unsigned long nr,
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a |= mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -141,12 +141,12 @@ int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a &= ~mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -166,12 +166,12 @@ int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a ^= mask;
 	raw_local_irq_restore(flags);
 	return res;

arch/mips/lib/csum_partial.S

@@ -270,7 +270,7 @@ LEAF(csum_partial)
 #endif
 
 	/* odd buffer alignment? */
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
 	wsbh	v1, sum
 	movn	sum, v1, t7
 #else
@@ -670,7 +670,7 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	addu	sum, v1
 #endif
 
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
 	wsbh	v1, sum
 	movn	sum, v1, odd
 #else

arch/mips/mm/c-r4k.c

@@ -1247,10 +1247,8 @@ static void __cpuinit setup_scache(void)
 		return;
 
 	default:
-		if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M32R2 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R2) {
+		if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+				    MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
 #ifdef CONFIG_MIPS_CPU_SCACHE
 			if (mips_sc_init ()) {
 				scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;

arch/mips/mm/sc-mips.c

@@ -98,10 +98,8 @@ static inline int __init mips_sc_probe(void)
 	c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
 
 	/* Ignore anything but MIPSxx processors */
-	if (c->isa_level != MIPS_CPU_ISA_M32R1 &&
-	    c->isa_level != MIPS_CPU_ISA_M32R2 &&
-	    c->isa_level != MIPS_CPU_ISA_M64R1 &&
-	    c->isa_level != MIPS_CPU_ISA_M64R2)
+	if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+			      MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)))
 		return 0;
 
 	/* Does this MIPS32/MIPS64 CPU have a config2 register? */

arch/mips/pci/pci-alchemy.c

@@ -19,7 +19,7 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/tlbmisc.h>
 
-#ifdef CONFIG_DEBUG_PCI
+#ifdef CONFIG_PCI_DEBUG
 #define DBG(x...) printk(KERN_DEBUG x)
 #else
 #define DBG(x...) do {} while (0)
@@ -162,7 +162,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
 	if (status & (1 << 29)) {
 		*data = 0xffffffff;
 		error = -1;
-		DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d",
+		DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n",
 		    access_type, bus->number, device);
 	} else if ((status >> 28) & 0xf) {
 		DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n",

arch/s390/include/asm/pgtable.h

@@ -344,6 +344,7 @@ extern unsigned long MODULES_END;
 #define _REGION3_ENTRY_CO	0x100	/* change-recording override	    */
 
 /* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN_LARGE ~0xfffffUL /* large page address	    */
 #define _SEGMENT_ENTRY_ORIGIN	~0x7ffUL/* segment table origin		    */
 #define _SEGMENT_ENTRY_RO	0x200	/* page protection bit		    */
 #define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
@@ -1531,7 +1532,8 @@ extern int s390_enable_sie(void);
 /*
  * No page table caches to initialise
  */
-#define pgtable_cache_init()	do { } while (0)
+static inline void pgtable_cache_init(void) { }
+static inline void check_pgt_cache(void) { }
 
 #include <asm-generic/pgtable.h>
 

arch/s390/lib/uaccess_pt.c

@@ -77,42 +77,69 @@ static size_t copy_in_kernel(size_t count, void __user *to,
  * >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address
  * contains the (negative) exception code.
  */
-static __always_inline unsigned long follow_table(struct mm_struct *mm,
-						  unsigned long addr, int write)
+#ifdef CONFIG_64BIT
+static unsigned long follow_table(struct mm_struct *mm,
+				  unsigned long address, int write)
 {
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *ptep;
+	unsigned long *table = (unsigned long *)__pa(mm->pgd);
+
+	switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
+	case _ASCE_TYPE_REGION1:
+		table = table + ((address >> 53) & 0x7ff);
+		if (unlikely(*table & _REGION_ENTRY_INV))
+			return -0x39UL;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	case _ASCE_TYPE_REGION2:
+		table = table + ((address >> 42) & 0x7ff);
+		if (unlikely(*table & _REGION_ENTRY_INV))
+			return -0x3aUL;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	case _ASCE_TYPE_REGION3:
+		table = table + ((address >> 31) & 0x7ff);
+		if (unlikely(*table & _REGION_ENTRY_INV))
+			return -0x3bUL;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	case _ASCE_TYPE_SEGMENT:
+		table = table + ((address >> 20) & 0x7ff);
+		if (unlikely(*table & _SEGMENT_ENTRY_INV))
+			return -0x10UL;
+		if (unlikely(*table & _SEGMENT_ENTRY_LARGE)) {
+			if (write && (*table & _SEGMENT_ENTRY_RO))
+				return -0x04UL;
+			return (*table & _SEGMENT_ENTRY_ORIGIN_LARGE) +
+				(address & ~_SEGMENT_ENTRY_ORIGIN_LARGE);
+		}
+		table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+	}
+	table = table + ((address >> 12) & 0xff);
+	if (unlikely(*table & _PAGE_INVALID))
+		return -0x11UL;
+	if (write && (*table & _PAGE_RO))
+		return -0x04UL;
+	return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
+}
 
-	pgd = pgd_offset(mm, addr);
-	if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
-		return -0x3aUL;
+#else /* CONFIG_64BIT */
 
-	pud = pud_offset(pgd, addr);
-	if (pud_none(*pud) || unlikely(pud_bad(*pud)))
-		return -0x3bUL;
+static unsigned long follow_table(struct mm_struct *mm,
+				  unsigned long address, int write)
+{
+	unsigned long *table = (unsigned long *)__pa(mm->pgd);
 
-	pmd = pmd_offset(pud, addr);
-	if (pmd_none(*pmd))
+	table = table + ((address >> 20) & 0x7ff);
+	if (unlikely(*table & _SEGMENT_ENTRY_INV))
 		return -0x10UL;
-	if (pmd_large(*pmd)) {
-		if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
-			return -0x04UL;
-		return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);
-	}
-	if (unlikely(pmd_bad(*pmd)))
-		return -0x10UL;
-
-	ptep = pte_offset_map(pmd, addr);
-	if (!pte_present(*ptep))
+	table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+	table = table + ((address >> 12) & 0xff);
+	if (unlikely(*table & _PAGE_INVALID))
 		return -0x11UL;
-	if (write && (!pte_write(*ptep) || !pte_dirty(*ptep)))
+	if (write && (*table & _PAGE_RO))
 		return -0x04UL;
-
-	return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK);
+	return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
 }
 
+#endif /* CONFIG_64BIT */
+
 static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
 					     size_t n, int write_user)
 {
@@ -197,7 +224,7 @@ size_t copy_to_user_pt(size_t n, void __user *to, const void *from)
 
 static size_t clear_user_pt(size_t n, void __user *to)
 {
-	void *zpage = &empty_zero_page;
+	void *zpage = (void *) empty_zero_page;
 	long done, size, ret;
 
 	done = 0;

arch/tile/kernel/setup.c

@@ -1004,15 +1004,8 @@ void __cpuinit setup_cpu(int boot)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 
-/*
- * Note that the kernel can potentially support other compression
- * techniques than gz, though we don't do so by default.  If we ever
- * decide to do so we can either look for other filename extensions,
- * or just allow a file with this name to be compressed with an
- * arbitrary compressor (somewhat counterintuitively).
- */
 static int __initdata set_initramfs_file;
-static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+static char __initdata initramfs_file[128] = "initramfs";
 
 static int __init setup_initramfs_file(char *str)
 {
@@ -1026,9 +1019,9 @@ static int __init setup_initramfs_file(char *str)
 early_param("initramfs_file", setup_initramfs_file);
 
 /*
- * We look for an "initramfs.cpio.gz" file in the hvfs.
- * If there is one, we allocate some memory for it and it will be
- * unpacked to the initramfs.
+ * We look for a file called "initramfs" in the hvfs.  If there is one, we
+ * allocate some memory for it and it will be unpacked to the initramfs.
+ * If it's compressed, the initd code will uncompress it first.
  */
 static void __init load_hv_initrd(void)
 {
@@ -1038,10 +1031,16 @@ static void __init load_hv_initrd(void)
 
 	fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
 	if (fd == HV_ENOENT) {
-		if (set_initramfs_file)
+		if (set_initramfs_file) {
 			pr_warning("No such hvfs initramfs file '%s'\n",
 				   initramfs_file);
-		return;
+			return;
+		} else {
+			/* Try old backwards-compatible name. */
+			fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz");
+			if (fd == HV_ENOENT)
+				return;
+		}
 	}
 	BUG_ON(fd < 0);
 	stat = hv_fs_fstat(fd);

arch/x86/boot/compressed/Makefile

@@ -4,7 +4,7 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -29,7 +29,6 @@ VMLINUX_OBJS = $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o \
 	$(obj)/piggy.o
 
 $(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone
-$(obj)/efi_stub_$(BITS).o: KBUILD_CLFAGS += -fshort-wchar -mno-red-zone
 
 ifeq ($(CONFIG_EFI_STUB), y)
 	VMLINUX_OBJS += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o
@@ -43,7 +42,7 @@ OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-targets += vmlinux.bin.all vmlinux.relocs
+targets += $(patsubst $(obj)/%,%,$(VMLINUX_OBJS)) vmlinux.bin.all vmlinux.relocs
 
 CMD_RELOCS = arch/x86/tools/relocs
 quiet_cmd_relocs = RELOCS  $@

arch/x86/include/asm/syscall.h

@@ -29,13 +29,13 @@ extern const unsigned long sys_call_table[];
  */
 static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 {
-	return regs->orig_ax & __SYSCALL_MASK;
+	return regs->orig_ax;
 }
 
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
-	regs->ax = regs->orig_ax & __SYSCALL_MASK;
+	regs->ax = regs->orig_ax;
 }
 
 static inline long syscall_get_error(struct task_struct *task,

arch/x86/kvm/lapic.c

@@ -1857,7 +1857,7 @@ int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data)
 	if (!pv_eoi_enabled(vcpu))
 		return 0;
 	return kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.pv_eoi.data,
-					 addr);
+					 addr, sizeof(u8));
 }
 
 void kvm_lapic_init(void)

arch/x86/kvm/x86.c

@@ -1823,7 +1823,8 @@ static int kvm_pv_enable_async_pf(struct kvm_vcpu *vcpu, u64 data)
 		return 0;
 	}
 
-	if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa))
+	if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa,
+					sizeof(u32)))
 		return 1;
 
 	vcpu->arch.apf.send_user_only = !(data & KVM_ASYNC_PF_SEND_ALWAYS);
@@ -1952,12 +1953,9 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 
 		gpa_offset = data & ~(PAGE_MASK | 1);
 
-		/* Check that the address is 32-byte aligned. */
-		if (gpa_offset & (sizeof(struct pvclock_vcpu_time_info) - 1))
-			break;
-
 		if (kvm_gfn_to_hva_cache_init(vcpu->kvm,
-		     &vcpu->arch.pv_time, data & ~1ULL))
+		     &vcpu->arch.pv_time, data & ~1ULL,
+		     sizeof(struct pvclock_vcpu_time_info)))
 			vcpu->arch.pv_time_enabled = false;
 		else
 			vcpu->arch.pv_time_enabled = true;
@@ -1977,7 +1975,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			return 1;
 
 		if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.st.stime,
-							data & KVM_STEAL_VALID_BITS))
+						data & KVM_STEAL_VALID_BITS,
+						sizeof(struct kvm_steal_time)))
 			return 1;
 
 		vcpu->arch.st.msr_val = data;

drivers/acpi/Kconfig

@@ -396,7 +396,7 @@ config ACPI_CUSTOM_METHOD
 
 config ACPI_BGRT
 	bool "Boottime Graphics Resource Table support"
-	depends on EFI
+	depends on EFI && X86
         help
 	  This driver adds support for exposing the ACPI Boottime Graphics
 	  Resource Table, which allows the operating system to obtain

drivers/acpi/acpi_i2c.c

@@ -90,7 +90,7 @@ void acpi_i2c_register_devices(struct i2c_adapter *adapter)
 	acpi_handle handle;
 	acpi_status status;
 
-	handle = ACPI_HANDLE(&adapter->dev);
+	handle = ACPI_HANDLE(adapter->dev.parent);
 	if (!handle)
 		return;
 

drivers/acpi/pci_root.c

@@ -415,7 +415,6 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	struct acpi_pci_root *root;
 	struct acpi_pci_driver *driver;
 	u32 flags, base_flags;
-	bool is_osc_granted = false;
 
 	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
 	if (!root)
@@ -476,6 +475,30 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
 	acpi_pci_osc_support(root, flags);
 
+	/*
+	 * TBD: Need PCI interface for enumeration/configuration of roots.
+	 */
+
+	mutex_lock(&acpi_pci_root_lock);
+	list_add_tail(&root->node, &acpi_pci_roots);
+	mutex_unlock(&acpi_pci_root_lock);
+
+	/*
+	 * Scan the Root Bridge
+	 * --------------------
+	 * Must do this prior to any attempt to bind the root device, as the
+	 * PCI namespace does not get created until this call is made (and
+	 * thus the root bridge's pci_dev does not exist).
+	 */
+	root->bus = pci_acpi_scan_root(root);
+	if (!root->bus) {
+		printk(KERN_ERR PREFIX
+			    "Bus %04x:%02x not present in PCI namespace\n",
+			    root->segment, (unsigned int)root->secondary.start);
+		result = -ENODEV;
+		goto out_del_root;
+	}
+
 	/* Indicate support for various _OSC capabilities. */
 	if (pci_ext_cfg_avail())
 		flags |= OSC_EXT_PCI_CONFIG_SUPPORT;
@@ -494,6 +517,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 			flags = base_flags;
 		}
 	}
+
 	if (!pcie_ports_disabled
 	    && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) {
 		flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL
@@ -514,54 +538,28 @@ static int acpi_pci_root_add(struct acpi_device *device,
 		status = acpi_pci_osc_control_set(device->handle, &flags,
 				       OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
 		if (ACPI_SUCCESS(status)) {
-			is_osc_granted = true;
 			dev_info(&device->dev,
 				"ACPI _OSC control (0x%02x) granted\n", flags);
+			if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
+				/*
+				 * We have ASPM control, but the FADT indicates
+				 * that it's unsupported. Clear it.
+				 */
+				pcie_clear_aspm(root->bus);
+			}
 		} else {
-			is_osc_granted = false;
 			dev_info(&device->dev,
 				"ACPI _OSC request failed (%s), "
 				"returned control mask: 0x%02x\n",
 				acpi_format_exception(status), flags);
+			pr_info("ACPI _OSC control for PCIe not granted, "
+				"disabling ASPM\n");
+			pcie_no_aspm();
 		}
 	} else {
 		dev_info(&device->dev,
-			"Unable to request _OSC control "
-			"(_OSC support mask: 0x%02x)\n", flags);
-	}
-
-	/*
-	 * TBD: Need PCI interface for enumeration/configuration of roots.
-	 */
-
-	mutex_lock(&acpi_pci_root_lock);
-	list_add_tail(&root->node, &acpi_pci_roots);
-	mutex_unlock(&acpi_pci_root_lock);
-
-	/*
-	 * Scan the Root Bridge
-	 * --------------------
-	 * Must do this prior to any attempt to bind the root device, as the
-	 * PCI namespace does not get created until this call is made (and 
-	 * thus the root bridge's pci_dev does not exist).
-	 */
-	root->bus = pci_acpi_scan_root(root);
-	if (!root->bus) {
-		printk(KERN_ERR PREFIX
-			    "Bus %04x:%02x not present in PCI namespace\n",
-			    root->segment, (unsigned int)root->secondary.start);
-		result = -ENODEV;
-		goto out_del_root;
-	}
-
-	/* ASPM setting */
-	if (is_osc_granted) {
-		if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
-			pcie_clear_aspm(root->bus);
-	} else {
-		pr_info("ACPI _OSC control for PCIe not granted, "
-			"disabling ASPM\n");
-		pcie_no_aspm();
+			 "Unable to request _OSC control "
+			 "(_OSC support mask: 0x%02x)\n", flags);
 	}
 
 	pci_acpi_add_bus_pm_notifier(device, root->bus);

drivers/acpi/processor_idle.c

@@ -66,7 +66,8 @@ module_param(latency_factor, uint, 0644);
 
 static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
 
-static struct acpi_processor_cx *acpi_cstate[CPUIDLE_STATE_MAX];
+static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX],
+								acpi_cstate);
 
 static int disabled_by_idle_boot_param(void)
 {
@@ -722,7 +723,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 		struct cpuidle_driver *drv, int index)
 {
 	struct acpi_processor *pr;
-	struct acpi_processor_cx *cx = acpi_cstate[index];
+	struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 
 	pr = __this_cpu_read(processors);
 
@@ -745,7 +746,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
  */
 static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
 {
-	struct acpi_processor_cx *cx = acpi_cstate[index];
+	struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 
 	ACPI_FLUSH_CPU_CACHE();
 
@@ -775,7 +776,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 		struct cpuidle_driver *drv, int index)
 {
 	struct acpi_processor *pr;
-	struct acpi_processor_cx *cx = acpi_cstate[index];
+	struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 
 	pr = __this_cpu_read(processors);
 
@@ -833,7 +834,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 		struct cpuidle_driver *drv, int index)
 {
 	struct acpi_processor *pr;
-	struct acpi_processor_cx *cx = acpi_cstate[index];
+	struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 
 	pr = __this_cpu_read(processors);
 
@@ -960,7 +961,7 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
 		    !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
 			continue;
 #endif
-		acpi_cstate[count] = cx;
+		per_cpu(acpi_cstate[count], dev->cpu) = cx;
 
 		count++;
 		if (count == CPUIDLE_STATE_MAX)

drivers/base/power/qos.c

@@ -46,6 +46,7 @@
 #include "power.h"
 
 static DEFINE_MUTEX(dev_pm_qos_mtx);
+static DEFINE_MUTEX(dev_pm_qos_sysfs_mtx);
 
 static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
 
@@ -216,12 +217,17 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
 	struct pm_qos_constraints *c;
 	struct pm_qos_flags *f;
 
-	mutex_lock(&dev_pm_qos_mtx);
+	mutex_lock(&dev_pm_qos_sysfs_mtx);
 
 	/*
 	 * If the device's PM QoS resume latency limit or PM QoS flags have been
 	 * exposed to user space, they have to be hidden at this point.
 	 */
+	pm_qos_sysfs_remove_latency(dev);
+	pm_qos_sysfs_remove_flags(dev);
+
+	mutex_lock(&dev_pm_qos_mtx);
+
 	__dev_pm_qos_hide_latency_limit(dev);
 	__dev_pm_qos_hide_flags(dev);
 
@@ -254,6 +260,8 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
 
  out:
 	mutex_unlock(&dev_pm_qos_mtx);
+
+	mutex_unlock(&dev_pm_qos_sysfs_mtx);
 }
 
 /**
@@ -558,6 +566,14 @@ static void __dev_pm_qos_drop_user_request(struct device *dev,
 	kfree(req);
 }
 
+static void dev_pm_qos_drop_user_request(struct device *dev,
+					 enum dev_pm_qos_req_type type)
+{
+	mutex_lock(&dev_pm_qos_mtx);
+	__dev_pm_qos_drop_user_request(dev, type);
+	mutex_unlock(&dev_pm_qos_mtx);
+}
+
 /**
  * dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space.
  * @dev: Device whose PM QoS latency limit is to be exposed to user space.
@@ -581,6 +597,8 @@ int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
 		return ret;
 	}
 
+	mutex_lock(&dev_pm_qos_sysfs_mtx);
+
 	mutex_lock(&dev_pm_qos_mtx);
 
 	if (IS_ERR_OR_NULL(dev->power.qos))
@@ -591,26 +609,27 @@ int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
 	if (ret < 0) {
 		__dev_pm_qos_remove_request(req);
 		kfree(req);
+		mutex_unlock(&dev_pm_qos_mtx);
 		goto out;
 	}
-
 	dev->power.qos->latency_req = req;
+
+	mutex_unlock(&dev_pm_qos_mtx);
+
 	ret = pm_qos_sysfs_add_latency(dev);
 	if (ret)
-		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
+		dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
 
  out:
-	mutex_unlock(&dev_pm_qos_mtx);
+	mutex_unlock(&dev_pm_qos_sysfs_mtx);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit);
 
 static void __dev_pm_qos_hide_latency_limit(struct device *dev)
 {
-	if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req) {
-		pm_qos_sysfs_remove_latency(dev);
+	if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req)
 		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
-	}
 }
 
 /**
@@ -619,9 +638,15 @@ static void __dev_pm_qos_hide_latency_limit(struct device *dev)
  */
 void dev_pm_qos_hide_latency_limit(struct device *dev)
 {
+	mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+	pm_qos_sysfs_remove_latency(dev);
+
 	mutex_lock(&dev_pm_qos_mtx);
 	__dev_pm_qos_hide_latency_limit(dev);
 	mutex_unlock(&dev_pm_qos_mtx);
+
+	mutex_unlock(&dev_pm_qos_sysfs_mtx);
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
 
@@ -649,6 +674,8 @@ int dev_pm_qos_expose_flags(struct device *dev, s32 val)
 	}
 
 	pm_runtime_get_sync(dev);
+	mutex_lock(&dev_pm_qos_sysfs_mtx);
+
 	mutex_lock(&dev_pm_qos_mtx);
 
 	if (IS_ERR_OR_NULL(dev->power.qos))
@@ -659,16 +686,19 @@ int dev_pm_qos_expose_flags(struct device *dev, s32 val)
 	if (ret < 0) {
 		__dev_pm_qos_remove_request(req);
 		kfree(req);
+		mutex_unlock(&dev_pm_qos_mtx);
 		goto out;
 	}
-
 	dev->power.qos->flags_req = req;
+
+	mutex_unlock(&dev_pm_qos_mtx);
+
 	ret = pm_qos_sysfs_add_flags(dev);
 	if (ret)
-		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+		dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
 
  out:
-	mutex_unlock(&dev_pm_qos_mtx);
+	mutex_unlock(&dev_pm_qos_sysfs_mtx);
 	pm_runtime_put(dev);
 	return ret;
 }
@@ -676,10 +706,8 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_expose_flags);
 
 static void __dev_pm_qos_hide_flags(struct device *dev)
 {
-	if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req) {
-		pm_qos_sysfs_remove_flags(dev);
+	if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req)
 		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
-	}
 }
 
 /**
@@ -689,9 +717,15 @@ static void __dev_pm_qos_hide_flags(struct device *dev)
 void dev_pm_qos_hide_flags(struct device *dev)
 {
 	pm_runtime_get_sync(dev);
+	mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+	pm_qos_sysfs_remove_flags(dev);
+
 	mutex_lock(&dev_pm_qos_mtx);
 	__dev_pm_qos_hide_flags(dev);
 	mutex_unlock(&dev_pm_qos_mtx);
+
+	mutex_unlock(&dev_pm_qos_sysfs_mtx);
 	pm_runtime_put(dev);
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);

drivers/base/regmap/regcache-rbtree.c

@@ -398,7 +398,7 @@ static int regcache_rbtree_sync(struct regmap *map, unsigned int min,
 			base = 0;
 
 		if (max < rbnode->base_reg + rbnode->blklen)
-			end = rbnode->base_reg + rbnode->blklen - max;
+			end = max - rbnode->base_reg + 1;
 		else
 			end = rbnode->blklen;
 

drivers/base/regmap/regmap.c

@@ -710,12 +710,12 @@ skip_format_initialization:
 		}
 	}
 
+	regmap_debugfs_init(map, config->name);
+
 	ret = regcache_init(map, config);
 	if (ret != 0)
 		goto err_range;
 
-	regmap_debugfs_init(map, config->name);
-
 	/* Add a devres resource for dev_get_regmap() */
 	m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
 	if (!m) {
@@ -943,8 +943,7 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
 		unsigned int ival;
 		int val_bytes = map->format.val_bytes;
 		for (i = 0; i < val_len / val_bytes; i++) {
-			memcpy(map->work_buf, val + (i * val_bytes), val_bytes);
-			ival = map->format.parse_val(map->work_buf);
+			ival = map->format.parse_val(val + (i * val_bytes));
 			ret = regcache_write(map, reg + (i * map->reg_stride),
 					     ival);
 			if (ret) {
@@ -1036,6 +1035,8 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
 			kfree(async->work_buf);
 			kfree(async);
 		}
+
+		return ret;
 	}
 
 	trace_regmap_hw_write_start(map->dev, reg,