s390/pci: debug device states

Use the debugfs to keep track of a pci function's status changes.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

arch/s390/include/asm/pci_debug.h

@@ -7,14 +7,11 @@ extern debug_info_t *pci_debug_msg_id;
 extern debug_info_t *pci_debug_err_id;
 
 #ifdef CONFIG_PCI_DEBUG
-#define zpci_dbg(fmt, args...)							\
-	do {									\
-		if (pci_debug_msg_id->level >= 2)				\
-			debug_sprintf_event(pci_debug_msg_id, 2, fmt , ## args);\
-	} while (0)
+#define zpci_dbg(imp, fmt, args...)				\
+	debug_sprintf_event(pci_debug_msg_id, imp, fmt, ##args)
 
 #else /* !CONFIG_PCI_DEBUG */
-#define zpci_dbg(fmt, args...) do { } while (0)
+#define zpci_dbg(imp, fmt, args...) do { } while (0)
 #endif
 
 #define zpci_err(text...)							\

arch/s390/pci/pci.c

@@ -99,9 +99,6 @@ static int __read_mostly aisb_max;
 static struct kmem_cache *zdev_irq_cache;
 static struct kmem_cache *zdev_fmb_cache;
 
-debug_info_t *pci_debug_msg_id;
-debug_info_t *pci_debug_err_id;
-
 static inline int irq_to_msi_nr(unsigned int irq)
 {
 	return irq & ZPCI_MSI_MASK;

arch/s390/pci/pci_clp.c

@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <asm/pci_debug.h>
 #include <asm/pci_clp.h>
 
 /*
@@ -144,6 +145,7 @@ int clp_add_pci_device(u32 fid, u32 fh, int configured)
 	struct zpci_dev *zdev;
 	int rc;
 
+	zpci_dbg(3, "add fid:%x, fh:%x, c:%d\n", fid, fh, configured);
 	zdev = zpci_alloc_device();
 	if (IS_ERR(zdev))
 		return PTR_ERR(zdev);
@@ -204,8 +206,8 @@ static int clp_set_pci_fn(u32 *fh, u8 nr_dma_as, u8 command)
 	if (!rc && rrb->response.hdr.rsp == CLP_RC_OK)
 		*fh = rrb->response.fh;
 	else {
-		pr_err("Set PCI FN failed with response: %x  cc: %d\n",
-			rrb->response.hdr.rsp, rc);
+		zpci_dbg(0, "SPF fh:%x, cc:%d, resp:%x\n", *fh, rc,
+			 rrb->response.hdr.rsp);
 		rc = -EIO;
 	}
 	clp_free_block(rrb);
@@ -221,6 +223,8 @@ int clp_enable_fh(struct zpci_dev *zdev, u8 nr_dma_as)
 	if (!rc)
 		/* Success -> store enabled handle in zdev */
 		zdev->fh = fh;
+
+	zpci_dbg(3, "ena fid:%x, fh:%x, rc:%d\n", zdev->fid, zdev->fh, rc);
 	return rc;
 }
 
@@ -237,9 +241,8 @@ int clp_disable_fh(struct zpci_dev *zdev)
 	if (!rc)
 		/* Success -> store disabled handle in zdev */
 		zdev->fh = fh;
-	else
-		dev_err(&zdev->pdev->dev,
-			"Failed to disable fn handle: 0x%x\n", fh);
+
+	zpci_dbg(3, "dis fid:%x, fh:%x, rc:%d\n", zdev->fid, zdev->fh, rc);
 	return rc;
 }
 

arch/s390/pci/pci_debug.c

@@ -11,12 +11,17 @@
 #include <linux/kernel.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <asm/debug.h>
 
 #include <asm/pci_dma.h>
 
 static struct dentry *debugfs_root;
+debug_info_t *pci_debug_msg_id;
+EXPORT_SYMBOL_GPL(pci_debug_msg_id);
+debug_info_t *pci_debug_err_id;
+EXPORT_SYMBOL_GPL(pci_debug_err_id);
 
 static char *pci_perf_names[] = {
 	/* hardware counters */
@@ -168,7 +173,6 @@ int __init zpci_debug_init(void)
 		return -EINVAL;
 	debug_register_view(pci_debug_msg_id, &debug_sprintf_view);
 	debug_set_level(pci_debug_msg_id, 3);
-	zpci_dbg("Debug view initialized\n");
 
 	/* error log */
 	pci_debug_err_id = debug_register("pci_error", 2, 1, 16);
@@ -176,7 +180,6 @@ int __init zpci_debug_init(void)
 		return -EINVAL;
 	debug_register_view(pci_debug_err_id, &debug_hex_ascii_view);
 	debug_set_level(pci_debug_err_id, 6);
-	zpci_err("Debug view initialized\n");
 
 	debugfs_root = debugfs_create_dir("pci", NULL);
 	return 0;

drivers/pci/hotplug/s390_pci_hpc.c

@@ -16,6 +16,7 @@
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/init.h>
+#include <asm/pci_debug.h>
 #include <asm/sclp.h>
 
 #define SLOT_NAME_SIZE	10
@@ -49,6 +50,7 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
 		return -EIO;
 
 	rc = sclp_pci_configure(slot->zdev->fid);
+	zpci_dbg(3, "conf fid:%x, rc:%d\n", slot->zdev->fid, rc);
 	if (!rc) {
 		slot->zdev->state = ZPCI_FN_STATE_CONFIGURED;
 		/* automatically scan the device after is was configured */
@@ -70,6 +72,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
 	 *	 or do we need to trigger that here?
 	 */
 	rc = sclp_pci_deconfigure(slot->zdev->fid);
+	zpci_dbg(3, "deconf fid:%x, rc:%d\n", slot->zdev->fid, rc);
 	if (!rc) {
 		/* Fixme: better call List-PCI to find the disabled FH
 		   for the FID since the FH should be opaque... */