Merge branch 'master' into for-linus

Documentation/kernel-parameters.txt

@@ -2048,7 +2048,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			WARNING: Forcing ASPM on may cause system lockups.
 
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-		off	Do not use native PCIe PME signaling.
+			Format: {auto|force}[,nomsi]
+		auto	Use native PCIe PME signaling if the BIOS allows the
+			kernel to control PCIe config registers of root ports.
 		force	Use native PCIe PME signaling even if the BIOS refuses
 			to allow the kernel to control the relevant PCIe config
 			registers.

Documentation/watchdog/watchdog-parameters.txt

@@ -125,6 +125,11 @@ ibmasr:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+imx2_wdt:
+timeout: Watchdog timeout in seconds (default 60 s)
+nowayout: Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+-------------------------------------------------
 indydog:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)

MAINTAINERS

@@ -896,11 +896,13 @@ S:	Maintained
 
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
+M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
-F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
+F:	arch/arm/plat-s5p/
 
 ARM/S3C2410 ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -1148,7 +1150,7 @@ F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
@@ -1160,18 +1162,18 @@ F:	drivers/video/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/net/macb.*
 
 ATMEL SPI DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
-L:	kernel@avr32linux.org
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:	Supported
 F:	drivers/usb/gadget/atmel_usba_udc.*
@@ -1581,7 +1583,7 @@ F:	include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
-L:	linux-cifs-client@lists.samba.org (moderated for non-subscribers)
+L:	linux-cifs@vger.kernel.org
 L:	samba-technical@lists.samba.org (moderated for non-subscribers)
 W:	http://linux-cifs.samba.org/
 Q:	http://patchwork.ozlabs.org/project/linux-cifs-client/list/
@@ -2109,11 +2111,18 @@ F:	drivers/edac/i5000_edac.c
 
 EDAC-I5400
 M:	Mauro Carvalho Chehab <mchehab@redhat.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
+EDAC-I7CORE
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/i7core_edac.c linux/edac_mce.h drivers/edac/edac_mce.c
+
 EDAC-I82975X
 M:	Ranganathan Desikan <ravi@jetztechnologies.com>
 M:	"Arvind R." <arvind@jetztechnologies.com>
@@ -2887,6 +2896,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 
+INPUT MULTITOUCH (MT) PROTOCOL
+M:	Henrik Rydberg <rydberg@euromail.se>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/input/multi-touch-protocol.txt
+K:	\b(ABS|SYN)_MT_
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -2978,20 +2994,14 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2100.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2200.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
@@ -3379,7 +3389,7 @@ KPROBES
 M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
 M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 M:	"David S. Miller" <davem@davemloft.net>
-M:	Masami Hiramatsu <mhiramat@redhat.com>
+M:	Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
@@ -4212,6 +4222,7 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	devicetree-discuss@lists.ozlabs.org
 W:	http://fdt.secretlab.ca
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	drivers/of
 F:	include/linux/of*.h
@@ -4626,6 +4637,12 @@ M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 
+QLOGIC QLA1280 SCSI DRIVER
+M:	Michael Reed <mdr@sgi.com>
+L:	linux-scsi@vger.kernel.org
+S:	Maintained
+F:	drivers/scsi/qla1280.[ch]
+
 QLOGIC QLA2XXX FC-SCSI DRIVER
 M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:	linux-driver@qlogic.com
@@ -5384,6 +5401,7 @@ M:	David Brownell <dbrownell@users.sourceforge.net>
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	Documentation/spi/
 F:	drivers/spi/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 35
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*
@@ -883,80 +883,10 @@ PHONY += $(vmlinux-dirs)
 $(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
 
-# Build the kernel release string
-#
-# The KERNELRELEASE value built here is stored in the file
-# include/config/kernel.release, and is used when executing several
-# make targets, such as "make install" or "make modules_install."
-#
-# The eventual kernel release string consists of the following fields,
-# shown in a hierarchical format to show how smaller parts are concatenated
-# to form the larger and final value, with values coming from places like
-# the Makefile, kernel config options, make command line options and/or
-# SCM tag information.
-#
-#	$(KERNELVERSION)
-#	  $(VERSION)			eg, 2
-#	  $(PATCHLEVEL)			eg, 6
-#	  $(SUBLEVEL)			eg, 18
-#	  $(EXTRAVERSION)		eg, -rc6
-#	$(localver-full)
-#	  $(localver)
-#	    localversion*		(files without backups, containing '~')
-#	    $(CONFIG_LOCALVERSION)	(from kernel config setting)
-#	  $(LOCALVERSION)		(from make command line, if provided)
-#	  $(localver-extra)
-#	    $(scm-identifier)		(unique SCM tag, if one exists)
-#	      ./scripts/setlocalversion	(only with CONFIG_LOCALVERSION_AUTO)
-#	      .scmversion		(only with CONFIG_LOCALVERSION_AUTO)
-#	    +				(only without CONFIG_LOCALVERSION_AUTO
-#					 and without LOCALVERSION= and
-#					 repository is at non-tagged commit)
-#
-# For kernels without CONFIG_LOCALVERSION_AUTO compiled from an SCM that has
-# been revised beyond a tagged commit, `+' is appended to the version string
-# when not overridden by using "make LOCALVERSION=".  This indicates that the
-# kernel is not a vanilla release version and has been modified.
-
-pattern = ".*/localversion[^~]*"
-string  = $(shell cat /dev/null \
-	   `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
-
-localver = $(subst $(space),, $(string) \
-			      $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-# scripts/setlocalversion is called to create a unique identifier if the source
-# is managed by a known SCM and the repository has been revised since the last
-# tagged (release) commit.  The format of the identifier is determined by the
-# SCM's implementation.
-#
-# .scmversion is used when generating rpm packages so we do not loose
-# the version information from the SCM when we do the build of the kernel
-# from the copied source
-ifeq ($(wildcard .scmversion),)
-        scm-identifier = $(shell $(CONFIG_SHELL) \
-                         $(srctree)/scripts/setlocalversion $(srctree))
-else
-        scm-identifier = $(shell cat .scmversion 2> /dev/null)
-endif
-
-ifdef CONFIG_LOCALVERSION_AUTO
-	localver-extra = $(scm-identifier)
-else
-	ifneq ($(scm-identifier),)
-		ifeq ($(LOCALVERSION),)
-			localver-extra = +
-		endif
-	endif
-endif
-
-localver-full = $(localver)$(LOCALVERSION)$(localver-extra)
-
 # Store (new) KERNELRELASE string in include/config/kernel.release
-kernelrelease = $(KERNELVERSION)$(localver-full)
 include/config/kernel.release: include/config/auto.conf FORCE
 	$(Q)rm -f $@
-	$(Q)echo $(kernelrelease) > $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) scripts/setlocalversion $(srctree))" > $@
 
 
 # Things we need to do before we recursively start building the kernel

arch/alpha/include/asm/bitops.h

@@ -410,7 +410,7 @@ static inline unsigned long __arch_hweight64(unsigned long w)
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int __arch_weight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	return __arch_hweight64(w);
 }

arch/alpha/kernel/Makefile

@@ -35,7 +35,7 @@ endif
 
 obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
 obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
 obj-y    += srmcons.o
 
 else
@@ -63,11 +63,11 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
 obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@ obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
 obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
 obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
 
 # Error support

arch/alpha/kernel/ns87312.c

@@ -1,38 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI.  Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399.  Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset).  The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
-	int data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	data = inb(ide_base+1);		/* read the current contents */
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
-	local_irq_restore(flags);
-}

arch/alpha/kernel/pc873xx.c

@@ -0,0 +1,88 @@
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+	return base;
+}
+
+char *__init pc873xx_get_model()
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}

arch/alpha/kernel/pc873xx.h

@@ -0,0 +1,35 @@
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif

arch/alpha/kernel/pci-sysfs.c

@@ -53,7 +53,6 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
 
 /**
  * pci_mmap_resource - map a PCI resource into user memory space
- * @filp: open sysfs file
  * @kobj: kobject for mapping
  * @attr: struct bin_attribute for the file being mapped
  * @vma: struct vm_area_struct passed into the mmap
@@ -61,7 +60,7 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
  */
-static int pci_mmap_resource(struct file *filp, struct kobject *kobj,
+static int pci_mmap_resource(struct kobject *kobj,
 			     struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {

arch/alpha/kernel/sys_sio.c

@@ -34,6 +34,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
+#include "pc873xx.h"
 
 #if defined(ALPHA_RESTORE_SRM_SETUP)
 /* Save LCA configuration data as the console had it set up.  */
@@ -208,7 +209,27 @@ noname_init_pci(void)
 	common_init_pci();
 	sio_pci_route();
 	sio_fixup_irq_levels(sio_collect_irq_levels());
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
 }
 
 static inline void __init

arch/arm/Kconfig

@@ -955,7 +955,8 @@ config XSCALE_PMU
 	default y
 
 config CPU_HAS_PMU
-	depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+	depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+		   (!ARCH_OMAP3 || OMAP3_EMU)
 	default y
 	bool
 

arch/arm/include/asm/mach/udc_pxa2xx.h

@@ -21,8 +21,8 @@ struct pxa2xx_udc_mach_info {
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
 	bool	gpio_vbus_inverted;
-	u16	gpio_vbus;			/* high == vbus present */
+	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
-	u16	gpio_pullup;			/* high == pullup activated */
+	int	gpio_pullup;			/* high == pullup activated */
 };
 

arch/arm/include/asm/processor.h

@@ -91,7 +91,11 @@ extern void release_thread(struct task_struct *);
 
 unsigned long get_wchan(struct task_struct *p);
 
+#if __LINUX_ARM_ARCH__ == 6
+#define cpu_relax()			smp_mb()
+#else
 #define cpu_relax()			barrier()
+#endif
 
 /*
  * Create a new kernel thread

arch/arm/kernel/perf_event.c

@@ -201,7 +201,7 @@ armpmu_event_update(struct perf_event *event,
 {
 	int shift = 64 - 32;
 	s64 prev_raw_count, new_raw_count;
-	s64 delta;
+	u64 delta;
 
 again:
 	prev_raw_count = atomic64_read(&hwc->prev_count);

arch/arm/mach-mx3/mach-mx31lilly.c

@@ -115,6 +115,8 @@ static struct platform_device physmap_flash_device = {
 
 /* USB */
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -244,10 +246,20 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&smsc91x_device,
-	&physmap_flash_device,
-};
+static void lilly1131_usb_init(void)
+{
+	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+
+#else
+static inline void lilly1131_usb_init(void) {}
+#endif /* CONFIG_USB_ULPI */
 
 /* SPI */
 
@@ -279,6 +291,11 @@ static struct spi_board_info mc13783_dev __initdata = {
 	.platform_data	= &mc13783_pdata,
 };
 
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
+};
+
 static int mx31lilly_baseboard;
 core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
 
@@ -321,13 +338,7 @@ static void __init mx31lilly_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* USB */
-	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	lilly1131_usb_init();
 }
 
 static void __init mx31lilly_timer_init(void)

arch/arm/mach-omap2/board-omap3stalker.c

@@ -538,9 +538,7 @@ static void ads7846_dev_init(void)
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 
 	gpio_direction_input(OMAP3_STALKER_TS_GPIO);
-
-	omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1);
-	omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa);
+	gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
 }
 
 static int ads7846_get_pendown_state(void)

arch/arm/mach-omap2/clock44xx_data.c

@@ -1369,6 +1369,7 @@ static struct clk emif1_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
@@ -1379,6 +1380,7 @@ static struct clk emif2_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,

arch/arm/mach-omap2/omap_hwmod.c

@@ -409,10 +409,11 @@ static int _init_main_clk(struct omap_hwmod *oh)
 		return 0;
 
 	oh->_clk = omap_clk_get_by_name(oh->main_clk);
-	if (!oh->_clk)
+	if (!oh->_clk) {
 		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
 			   oh->name, oh->main_clk);
 		return -EINVAL;
+	}
 
 	if (!oh->_clk->clkdm)
 		pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
@@ -444,10 +445,11 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 			continue;
 
 		c = omap_clk_get_by_name(os->clk);
-		if (!c)
+		if (!c) {
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
+		}
 		os->_clk = c;
 	}
 
@@ -470,10 +472,11 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
 		c = omap_clk_get_by_name(oc->clk);
-		if (!c)
+		if (!c) {
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
+		}
 		oc->_clk = c;
 	}
 

arch/arm/mach-omap2/pm34xx.c

@@ -99,7 +99,7 @@ static void omap3_enable_io_chain(void)
 		/* Do a readback to assure write has been done */
 		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
 			 OMAP3430_ST_IO_CHAIN_MASK)) {
 			timeout++;
 			if (timeout > 1000) {
@@ -108,7 +108,7 @@ static void omap3_enable_io_chain(void)
 				return;
 			}
 			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					     WKUP_MOD, PM_WKST);
+					     WKUP_MOD, PM_WKEN);
 		}
 	}
 }

arch/arm/mach-omap2/usb-ehci.c

@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
 #include <asm/io.h>
 #include <plat/mux.h>
 

arch/arm/mach-pxa/mioa701.c

@@ -697,7 +697,7 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
 };
 
 /* Board I2C devices. */
-static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+static struct i2c_board_info mioa701_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x5d),
 	},

arch/arm/mach-pxa/z2.c

@@ -3,8 +3,9 @@
  *
  *  Support for the Zipit Z2 Handheld device.
  *
- *  Author: 	Ken McGuire
- *  Created:	Jan 25, 2009
+ *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  Based on research and code by: Ken McGuire
  *  Based on mainstone.c as modified for the Zipit Z2.
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -157,21 +158,14 @@ static struct mtd_partition z2_flash_parts[] = {
 	{
 		.name	= "U-Boot Bootloader",
 		.offset	= 0x0,
-		.size	= 0x20000,
-	},
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0x20000,
-		.size	= 0x220000,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= 0x240000,
-		.size	= 0x5b0000,
-	},
-	{
+		.size	= 0x40000,
+	}, {
 		.name	= "U-Boot Environment",
-		.offset	= 0x7f0000,
+		.offset	= 0x40000,
+		.size	= 0x60000,
+	}, {
+		.name	= "Flash",
+		.offset	= 0x60000,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };

arch/arm/mach-realview/Kconfig

@@ -18,6 +18,7 @@ config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Enable support for the ARM11MPCore tile on the Realview platform.
 
@@ -35,6 +36,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
 	  PB11MPCore is a platform with an on-board ARM11MPCore and has

arch/arm/mach-realview/include/mach/barriers.h

@@ -0,0 +1,8 @@
+/*
+ * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
+ * controller to work around hardware errata causing the outer_sync()
+ * operation to deadlock the system.
+ */
+#define mb()		dsb()
+#define rmb()		dmb()
+#define wmb()		mb()

arch/arm/mach-realview/realview_eb.c

@@ -32,6 +32,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
@@ -457,7 +458,7 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_EB_UART0_BASE,
+	.phys_io	= REALVIEW_EB_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,

arch/arm/mach-realview/realview_pb1176.c

@@ -32,6 +32,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -351,7 +352,7 @@ static void __init realview_pb1176_init(void)
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB1176_UART0_BASE,
+	.phys_io	= REALVIEW_PB1176_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pb1176_fixup,

arch/arm/mach-realview/realview_pb11mp.c

@@ -32,6 +32,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
@@ -373,7 +374,7 @@ static void __init realview_pb11mp_init(void)
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
+	.phys_io	= REALVIEW_PB11MP_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,

arch/arm/mach-realview/realview_pba8.c

@@ -31,6 +31,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 
 #include <asm/mach/arch.h>
@@ -323,7 +324,7 @@ static void __init realview_pba8_init(void)
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBA8_UART0_BASE,
+	.phys_io	= REALVIEW_PBA8_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,

arch/arm/mach-realview/realview_pbx.c

@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
 #include <asm/smp_twd.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -409,7 +410,7 @@ static void __init realview_pbx_init(void)
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.phys_io	= REALVIEW_PBX_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pbx_fixup,

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -2,6 +2,7 @@
  * Versatile Express Core Tile Cortex A9x4 Support
  */
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
@@ -9,6 +10,7 @@
 #include <linux/amba/clcd.h>
 
 #include <asm/clkdev.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
@@ -235,7 +237,7 @@ static void ct_ca9x4_init(void)
 }
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
-	.phys_io	= V2M_UART0,
+	.phys_io	= V2M_UART0 & SECTION_MASK,
 	.io_pg_offst	= (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= ct_ca9x4_map_io,

arch/arm/mm/Kconfig

@@ -735,6 +735,25 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config DMA_CACHE_RWFO
+	bool "Enable read/write for ownership DMA cache maintenance"
+	depends on CPU_V6 && SMP
+	default y
+	help
+	  The Snoop Control Unit on ARM11MPCore does not detect the
+	  cache maintenance operations and the dma_{map,unmap}_area()
+	  functions may leave stale cache entries on other CPUs. By
+	  enabling this option, Read or Write For Ownership in the ARMv6
+	  DMA cache maintenance functions is performed. These LDR/STR
+	  instructions change the cache line state to shared or modified
+	  so that the cache operation has the desired effect.
+
+	  Note that the workaround is only valid on processors that do
+	  not perform speculative loads into the D-cache. For such
+	  processors, if cache maintenance operations are not broadcast
+	  in hardware, other workarounds are needed (e.g. cache
+	  maintenance broadcasting in software via FIQ).
+
 config OUTER_CACHE
 	bool
 
@@ -794,6 +813,8 @@ config ARM_L1_CACHE_SHIFT
 
 config ARM_DMA_MEM_BUFFERABLE
 	bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+	depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
+		     MACH_REALVIEW_PB11MP)
 	default y if CPU_V6 || CPU_V7
 	help
 	  Historically, the kernel has used strongly ordered mappings to

arch/arm/mm/cache-v6.S

@@ -211,8 +211,9 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_SMP
-	str	r0, [r0]			@ write for ownership
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldr	r2, [r0]			@ read for ownership
+	str	r2, [r0]			@ write for ownership
 #endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
@@ -234,7 +235,7 @@ v6_dma_inv_range:
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 #endif
 #ifdef HARVARD_CACHE
@@ -257,7 +258,7 @@ v6_dma_clean_range:
 ENTRY(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 	str	r2, [r0]			@ write for ownership
 #endif
@@ -283,9 +284,13 @@ ENTRY(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
+#ifndef CONFIG_DMA_CACHE_RWFO
+	b	v6_dma_clean_range
+#else
 	teq	r2, #DMA_TO_DEVICE
 	beq	v6_dma_clean_range
 	b	v6_dma_flush_range
+#endif
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -295,6 +300,11 @@ ENDPROC(v6_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_RWFO
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v6_dma_inv_range
+#endif
 	mov	pc, lr
 ENDPROC(v6_dma_unmap_area)
 

arch/arm/mm/dma-mapping.c

@@ -24,15 +24,6 @@
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
 
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
-
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = ISA_DMA_THRESHOLD;
@@ -123,6 +114,15 @@ static void __dma_free_buffer(struct page *page, size_t size)
 }
 
 #ifdef CONFIG_MMU
+/* Sanity check size */
+#if (CONSISTENT_DMA_SIZE % SZ_2M)
+#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
+#endif
+
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */

arch/arm/plat-omap/dmtimer.c

@@ -541,11 +541,11 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
 		  * timer is stopped
 		  */
 		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
-		/* Ack possibly pending interrupt */
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
-				OMAP_TIMER_INT_OVERFLOW);
 #endif
 	}
+	/* Ack possibly pending interrupt */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+			OMAP_TIMER_INT_OVERFLOW);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 

arch/arm/plat-omap/gpio.c

@@ -673,6 +673,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 			clk_disable(bank->dbck);
 	}
+	bank->dbck_enable_mask = val;
 
 	__raw_writel(val, reg);
 }

arch/arm/plat-omap/iovmm.c

@@ -140,8 +140,10 @@ static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
 		return ERR_PTR(-ENOMEM);
 
 	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
-	if (err)
+	if (err) {
+		kfree(sgt);
 		return ERR_PTR(err);
+	}
 
 	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
 

arch/arm/plat-pxa/Makefile

@@ -2,8 +2,9 @@
 # Makefile for code common across different PXA processor families
 #
 
-obj-y	:= dma.o pmu.o
+obj-y	:= dma.o
 
+obj-$(CONFIG_ARCH_PXA)		+= pmu.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o

arch/ia64/mm/tlb.c

@@ -121,7 +121,7 @@ static inline void down_spin(struct spinaphore *ss)
 	ia64_invala();
 
 	for (;;) {
-		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+		asm volatile ("ld8.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
 		if (time_before(t, serve))
 			return;
 		cpu_relax();

arch/powerpc/Kconfig.debug

@@ -135,13 +135,6 @@ config DEBUGGER
 	depends on KGDB || XMON
 	default y
 
-config IRQSTACKS
-	bool "Use separate kernel stacks when processing interrupts"
-	help
-	  If you say Y here the kernel will use separate kernel stacks
-	  for handling hard and soft interrupts.  This can help avoid
-	  overflowing the process kernel stacks.
-
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
 	depends on DEBUG_FS

arch/powerpc/boot/Makefile

@@ -141,7 +141,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree
+hostprogs-y	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \

arch/powerpc/boot/addRamDisk.c

@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
-	unsigned long long addr;
-	unsigned long memsize;
-	unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
-	Elf64_Ehdr *elf64 = p;
-	Elf64_Phdr *elf64ph;
-
-	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
-	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
-	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
-	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
-	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
-	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
-	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
-		return 0;
-
-	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
-		return 0;
-
-	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
-				  (unsigned long)elf64->e_phoff);
-
-	r->memsize = (unsigned long)elf64ph->p_memsz;
-	r->offset = (unsigned long)elf64ph->p_offset;
-	r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
-	printf("PPC64 ELF file, ph:\n");
-	printf("p_type   0x%08x\n", elf64ph->p_type);
-	printf("p_flags  0x%08x\n", elf64ph->p_flags);
-	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
-	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
-	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
-	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
-	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
-	printf("p_align  0x%016llx\n", elf64ph->p_align);
-	printf("... skipping 0x%08lx bytes of ELF header\n",
-	       (unsigned long)elf64ph->p_offset);
-#endif
-
-	return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
-	unsigned j;
-	unsigned num = fread(buf, 1, 4096, file);
-	for ( j=num; j<4096; ++j )
-		buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
-	fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
-	fprintf(stderr, msg);
-	fclose(fdesc);
-	unlink(fname);
-	exit(1);
-}
-
-int main(int argc, char **argv)
-{
-	char inbuf[4096];
-	struct addr_range vmlinux;
-	FILE *ramDisk;
-	FILE *inputVmlinux;
-	FILE *outputVmlinux;
-
-	char *rd_name, *lx_name, *out_name;
-
-	size_t i;
-	unsigned long ramFileLen;
-	unsigned long ramLen;
-	unsigned long roundR;
-	unsigned long offset_end;
-
-	unsigned long kernelLen;
-	unsigned long actualKernelLen;
-	unsigned long round;
-	unsigned long roundedKernelLen;
-	unsigned long ramStartOffs;
-	unsigned long ramPages;
-	unsigned long roundedKernelPages;
-	unsigned long hvReleaseData;
-	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca;
-	unsigned long xRamDisk;
-	unsigned long xRamDiskSize;
-	long padPages;
-  
-  
-	if (argc < 2) {
-		fprintf(stderr, "Name of RAM disk file missing.\n");
-		exit(1);
-	}
-	rd_name = argv[1];
-
-	if (argc < 3) {
-		fprintf(stderr, "Name of vmlinux file missing.\n");
-		exit(1);
-	}
-	lx_name = argv[2];
-
-	if (argc < 4) {
-		fprintf(stderr, "Name of vmlinux output file missing.\n");
-		exit(1);
-	}
-	out_name = argv[3];
-
-
-	ramDisk = fopen(rd_name, "r");
-	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
-		exit(1);
-	}
-
-	inputVmlinux = fopen(lx_name, "r");
-	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
-		exit(1);
-	}
-  
-	outputVmlinux = fopen(out_name, "w+");
-	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
-		exit(1);
-	}
-
-	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
-	if (i != sizeof(inbuf)) {
-		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
-		exit(1);
-	}
-
-	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
-	if (i == 0) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
-		exit(1);
-	}
-
-	/* Input Vmlinux file */
-	fseek(inputVmlinux, 0, SEEK_END);
-	kernelLen = ftell(inputVmlinux);
-	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %lu\n", kernelLen);
-
-	actualKernelLen = kernelLen - ElfHeaderSize;
-
-	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
-	round = actualKernelLen % 4096;
-	roundedKernelLen = actualKernelLen;
-	if ( round )
-		roundedKernelLen += (4096 - round);
-	printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
-	roundedKernelPages = roundedKernelLen / 4096;
-	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
-	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
-	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
-	padPages = offset_end/4096 - roundedKernelPages;
-
-	/* Check and see if the vmlinux is already larger than _end in System.map */
-	if (padPages < 0) {
-		/* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ 
-		offset_end = roundedKernelLen;
-		printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
-		padPages = 0;
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-	else {
-		/* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
-		printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-
-
-
-	/* Input Ram Disk file */
-	// Set the offset that the ram disk will be started at.
-	ramStartOffs = offset_end;  /* determined from the input vmlinux file and the system map */
-	printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-  
-	fseek(ramDisk, 0, SEEK_END);
-	ramFileLen = ftell(ramDisk);
-	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
-	ramLen = ramFileLen;
-
-	roundR = 4096 - (ramLen % 4096);
-	if ( roundR ) {
-		printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		ramLen += roundR;
-	}
-
-	printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
-	ramPages = ramLen / 4096;
-	printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
-  // Copy 64K ELF header
-	for (i=0; i<(ElfPages); ++i) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Copy the vmlinux (as full pages). */
-	fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-	for ( i=0; i<roundedKernelPages; ++i ) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-  
-	/* Insert pad pages (if appropriate) that are needed between */
-	/* | the end of the vmlinux and the ram disk. */
-	for (i=0; i<padPages; ++i) {
-		memset(inbuf, 0, 4096);
-		put4k(outputVmlinux, inbuf);
-	}
-
-	/* Copy the ram disk (as full pages). */
-	for ( i=0; i<ramPages; ++i ) {
-		get4k( ramDisk, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Close the input files */
-	fclose(ramDisk);
-	fclose(inputVmlinux);
-	/* And flush the written output file */
-	fflush(outputVmlinux);
-
-
-
-	/* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
-	/* fseek to the hvReleaseData pointer */
-	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
-	}
-	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
-	/* fseek to the hvReleaseData */
-	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
-	}
-	/* Check hvReleaseData sanity */
-	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
-	}
-	/* Get the naca pointer */
-	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
-	printf("Naca is at offset 0x%lx \n", naca);
-
-	/* fseek to the naca */
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, out_name);
-	}
-	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-	/* Make sure a RAM disk isn't already present */
-	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
-	}
-	/* Fill in the values */
-	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-	*((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-	/* Write out the new naca */
-	fflush(outputVmlinux);
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, out_name);
-	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
-	       ramPages, ramStartOffs);
-
-	/* Done */
-	fclose(outputVmlinux);
-	/* Set permission to executable */
-	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-	return 0;
-}
-

arch/powerpc/boot/dts/lite5200.dts

@@ -134,12 +134,16 @@
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
@@ -230,8 +234,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
@@ -255,7 +259,13 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
+
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
 };

arch/powerpc/boot/dts/lite5200b.dts

@@ -259,6 +259,11 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
 
 		sram@8000 {

arch/powerpc/configs/40x/acadia_defconfig

@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/ep405_defconfig

@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/hcu4_defconfig

@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/kilauea_defconfig

@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/makalu_defconfig

@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/virtex_defconfig

@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/40x/walnut_defconfig

@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/arches_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/bamboo_defconfig

@@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/canyonlands_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/ebony_defconfig

@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/eiger_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/katmai_defconfig

@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/rainier_defconfig

@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/redwood_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/sam440ep_defconfig

@@ -103,8 +103,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/sequoia_defconfig

@@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/taishan_defconfig

@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/virtex5_defconfig

@@ -80,8 +80,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/52xx/cm5200_defconfig

@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/52xx/lite5200b_defconfig

@@ -96,8 +96,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/52xx/motionpro_defconfig

@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/52xx/pcm030_defconfig

@@ -98,8 +98,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set

arch/powerpc/configs/52xx/tqm5200_defconfig

@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/gef_ppc9a_defconfig

@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/gef_sbc310_defconfig

@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/gef_sbc610_defconfig

@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig

@@ -98,8 +98,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig

@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/sbc8641d_defconfig

@@ -102,8 +102,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/adder875_defconfig

@@ -92,8 +92,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set

arch/powerpc/configs/amigaone_defconfig

@@ -87,8 +87,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/c2k_defconfig

@@ -102,8 +102,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/cell_defconfig

@@ -83,8 +83,7 @@ CONFIG_CPUSETS=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y

arch/powerpc/configs/celleb_defconfig

@@ -78,8 +78,7 @@ CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/chrp32_defconfig

@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/ep8248e_defconfig

@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set

arch/powerpc/configs/ep88xc_defconfig

@@ -91,8 +91,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set

arch/powerpc/configs/g5_defconfig

@@ -82,8 +82,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/gamecube_defconfig

@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/holly_defconfig

@@ -73,7 +73,6 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""

arch/powerpc/configs/iseries_defconfig

@@ -81,8 +81,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/linkstation_defconfig

@@ -97,8 +97,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/maple_defconfig

@@ -78,8 +78,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/mgcoge_defconfig

@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/mgsuvd_defconfig

@@ -90,8 +90,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/mpc512x_defconfig

@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/mpc5200_defconfig

@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/mpc7448_hpc2_defconfig

@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/pasemi_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=64
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/pmac32_defconfig

@@ -93,8 +93,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/ppc40x_defconfig

@@ -99,8 +99,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/ppc44x_defconfig

@@ -103,8 +103,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/ppc64_defconfig

@@ -93,8 +93,7 @@ CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y

arch/powerpc/configs/ppc64e_defconfig

@@ -107,8 +107,7 @@ CONFIG_CPUSETS=y
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/pq2fads_defconfig

@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y