Merge the modeset-rework, basic conversion into drm-intel-next

As a quick reference I'll detail the motivation and design of the new code a
bit here (mostly stitched together from patchbomb announcements and commits
introducing the new concepts).

The crtc helper code has the fundamental assumption that encoders and crtcs can
be enabled/disabled in any order, as long as we take care of depencies (which
means that enabled encoders need an enabled crtc to feed them data,
essentially).

Our hw works differently. We already have tons of ugly cases where crtc code
enables encoder hw (or encoder->mode_set enables stuff that should only be
enabled in enocder->commit) to work around these issues. But on the disable
side we can't pull off similar tricks - there we actually need to rework the
modeset sequence that controls all this. And this is also the real motivation
why I've finally undertaken this rewrite: eDP on my shiny new Ivybridge
Ultrabook is broken, and it's broken due to the wrong disable sequence ...

The new code introduces a few interfaces and concepts:

- Add new encoder->enable/disable functions which are directly called from the
crtc->enable/disable function. This ensures that the encoder's can be
enabled/disabled at a very specific in the modeset sequence, controlled by our
platform specific code (instead of the crtc helper code calling them at a time
it deems convenient).

- Rework the dpms code - our code has mostly 1:1 connector:encoder mappings and
does support cloning on only a few encoders, so we can simplify things quite a
bit.

- Also only ever disable/enable the entire output pipeline. This ensures that
we obey the right sequence of enabling/disabling things, trying to be clever
here mostly just complicates the code and results in bugs. For cloneable
encoders this requires a bit of special handling to ensure that outputs can
still be disabled individually, but it simplifies the common case.

- Add infrastructure to read out the current hw state. No amount of careful
ordering will help us if we brick the hw on the initial modeset setup. Which
could happen if we just randomly disable things, oblivious to the state set up
by the bios. Hence we need to be able to read that out. As a benefit, we grow a
few generic functions useful to cross-check our modeset code with actual hw
state.

With all this in place, we can copy&paste the crtc helper code into the
drm/i915 driver and start to rework it:

- As detailed above, the new code only disables/enables an entire output pipe.
As a preparation for global mode-changes (e.g. reassigning shared resources) it
keeps track of which pipes need to be touched by a set of bitmasks.

- To ensure that we correctly disable the current display pipes, we need to
know the currently active connector/encoder/crtc linking. The old crtc helper
simply overwrote these links with the new setup, the new code stages the new
links in ->new_* pointers. Those get commited to the real linking pointers once
the old output configuration has been torn down, before the ->mode_set
callbacks are called.

- Finally the code adds tons of self-consistency checks by employing the new hw
state readout functions to cross-check the actual hw state with what the
datastructure think it should be. These checks are done both after every
modeset and after the hw state has been read out and sanitized at boot/resume
time. All these checks greatly helped in tracking down regressions and bugs in
the new code.

With this new basis, a lot of cleanups and improvements to the code are now
possible (besides the DP fixes that ultimately made me write this), but not yet
done:

- I think we should create struct intel_mode and use it as the adjusted mode
everywhere to store little pieces like needs_tvclock, pipe dithering values or
dp link parameters. That would still be a layering violation, but at least we
wouldn't need to recompute these kinds of things in intel_display.c. Especially
the port bpc computation needed for selecting the pipe bpc and dithering
settings in intel_display.c is rather gross.

- In a related rework we could implement ->mode_valid in terms of ->mode_fixup
in a generic way - I've hunted down too many bugs where ->mode_valid did the
right thing, but ->mode_fixup didn't. Or vice versa, resulting in funny bugs
for user-supplied modes.

- Ditch the idea to rework the hdp handling in the common crtc helper code and
just move things to i915.ko. Which would rid us of the ->detect crtc helper
dependencies.

- LVDS wire pair and pll enabling is all done in the crtc->mode_set function
currently. We should be able to move this to the crtc_enable callbacks (or in
the case of the LVDS wire pair enabling, into some encoder callback).

Last, but not least, this new code should also help in enabling a few neat
features: The hw state readout code prepares (but there are still big pieces
missing) for fastboot, i.e. avoiding the inital modeset at boot-up and just
taking over the configuration left behind by the bios. We also should be able
to extend the configuration checks in the beginning of the modeset sequence and
make better decisions about shared resources (which is the entire point behind
the atomic/global modeset ioctl).

Tested-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Damien Lespiau <damien.lespiau@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Acked-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/dvo.h

@@ -114,6 +114,12 @@ struct intel_dvo_dev_ops {
 	 */
 	enum drm_connector_status (*detect)(struct intel_dvo_device *dvo);
 
+	/*
+	 * Probe the current hw status, returning true if the connected output
+	 * is active.
+	 */
+	bool (*get_hw_state)(struct intel_dvo_device *dev);
+
 	/**
 	 * Query the device for the modes it provides.
 	 *

drivers/gpu/drm/i915/dvo_ch7017.c

@@ -359,6 +359,18 @@ static void ch7017_dpms(struct intel_dvo_device *dvo, bool enable)
 	msleep(20);
 }
 
+static bool ch7017_get_hw_state(struct intel_dvo_device *dvo)
+{
+	uint8_t val;
+
+	ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val);
+
+	if (val & CH7017_LVDS_POWER_DOWN_EN)
+		return false;
+	else
+		return true;
+}
+
 static void ch7017_dump_regs(struct intel_dvo_device *dvo)
 {
 	uint8_t val;
@@ -396,6 +408,7 @@ struct intel_dvo_dev_ops ch7017_ops = {
 	.mode_valid = ch7017_mode_valid,
 	.mode_set = ch7017_mode_set,
 	.dpms = ch7017_dpms,
+	.get_hw_state = ch7017_get_hw_state,
 	.dump_regs = ch7017_dump_regs,
 	.destroy = ch7017_destroy,
 };

drivers/gpu/drm/i915/dvo_ch7xxx.c

@@ -297,6 +297,18 @@ static void ch7xxx_dpms(struct intel_dvo_device *dvo, bool enable)
 		ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_FPD);
 }
 
+static bool ch7xxx_get_hw_state(struct intel_dvo_device *dvo)
+{
+	u8 val;
+
+	ch7xxx_readb(dvo, CH7xxx_PM, &val);
+
+	if (val & CH7xxx_PM_FPD)
+		return false;
+	else
+		return true;
+}
+
 static void ch7xxx_dump_regs(struct intel_dvo_device *dvo)
 {
 	int i;
@@ -326,6 +338,7 @@ struct intel_dvo_dev_ops ch7xxx_ops = {
 	.mode_valid = ch7xxx_mode_valid,
 	.mode_set = ch7xxx_mode_set,
 	.dpms = ch7xxx_dpms,
+	.get_hw_state = ch7xxx_get_hw_state,
 	.dump_regs = ch7xxx_dump_regs,
 	.destroy = ch7xxx_destroy,
 };

drivers/gpu/drm/i915/dvo_ivch.c

@@ -323,6 +323,20 @@ static void ivch_dpms(struct intel_dvo_device *dvo, bool enable)
 	udelay(16 * 1000);
 }
 
+static bool ivch_get_hw_state(struct intel_dvo_device *dvo)
+{
+	uint16_t vr01;
+
+	/* Set the new power state of the panel. */
+	if (!ivch_read(dvo, VR01, &vr01))
+		return false;
+
+	if (vr01 & VR01_LCD_ENABLE)
+		return true;
+	else
+		return false;
+}
+
 static void ivch_mode_set(struct intel_dvo_device *dvo,
 			  struct drm_display_mode *mode,
 			  struct drm_display_mode *adjusted_mode)
@@ -413,6 +427,7 @@ static void ivch_destroy(struct intel_dvo_device *dvo)
 struct intel_dvo_dev_ops ivch_ops = {
 	.init = ivch_init,
 	.dpms = ivch_dpms,
+	.get_hw_state = ivch_get_hw_state,
 	.mode_valid = ivch_mode_valid,
 	.mode_set = ivch_mode_set,
 	.detect = ivch_detect,

drivers/gpu/drm/i915/dvo_ns2501.c

@@ -492,6 +492,20 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 		restore_dvo(dvo);
 }
 
+/* set the NS2501 power state */
+static bool ns2501_get_hw_state(struct intel_dvo_device *dvo)
+{
+	unsigned char ch;
+
+	if (!ns2501_readb(dvo, NS2501_REG8, &ch))
+		return false;
+
+	if (ch & NS2501_8_PD)
+		return true;
+	else
+		return false;
+}
+
 /* set the NS2501 power state */
 static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable)
 {
@@ -568,6 +582,7 @@ struct intel_dvo_dev_ops ns2501_ops = {
 	.mode_valid = ns2501_mode_valid,
 	.mode_set = ns2501_mode_set,
 	.dpms = ns2501_dpms,
+	.get_hw_state = ns2501_get_hw_state,
 	.dump_regs = ns2501_dump_regs,
 	.destroy = ns2501_destroy,
 };

drivers/gpu/drm/i915/dvo_sil164.c

@@ -226,6 +226,21 @@ static void sil164_dpms(struct intel_dvo_device *dvo, bool enable)
 	return;
 }
 
+static bool sil164_get_hw_state(struct intel_dvo_device *dvo)
+{
+	int ret;
+	unsigned char ch;
+
+	ret = sil164_readb(dvo, SIL164_REG8, &ch);
+	if (ret == false)
+		return false;
+
+	if (ch & SIL164_8_PD)
+		return true;
+	else
+		return false;
+}
+
 static void sil164_dump_regs(struct intel_dvo_device *dvo)
 {
 	uint8_t val;
@@ -258,6 +273,7 @@ struct intel_dvo_dev_ops sil164_ops = {
 	.mode_valid = sil164_mode_valid,
 	.mode_set = sil164_mode_set,
 	.dpms = sil164_dpms,
+	.get_hw_state = sil164_get_hw_state,
 	.dump_regs = sil164_dump_regs,
 	.destroy = sil164_destroy,
 };

drivers/gpu/drm/i915/dvo_tfp410.c

@@ -249,6 +249,19 @@ static void tfp410_dpms(struct intel_dvo_device *dvo, bool enable)
 	tfp410_writeb(dvo, TFP410_CTL_1, ctl1);
 }
 
+static bool tfp410_get_hw_state(struct intel_dvo_device *dvo)
+{
+	uint8_t ctl1;
+
+	if (!tfp410_readb(dvo, TFP410_CTL_1, &ctl1))
+		return false;
+
+	if (ctl1 & TFP410_CTL_1_PD)
+		return true;
+	else
+		return false;
+}
+
 static void tfp410_dump_regs(struct intel_dvo_device *dvo)
 {
 	uint8_t val, val2;
@@ -299,6 +312,7 @@ struct intel_dvo_dev_ops tfp410_ops = {
 	.mode_valid = tfp410_mode_valid,
 	.mode_set = tfp410_mode_set,
 	.dpms = tfp410_dpms,
+	.get_hw_state = tfp410_get_hw_state,
 	.dump_regs = tfp410_dump_regs,
 	.destroy = tfp410_destroy,
 };

drivers/gpu/drm/i915/i915_drv.c

@@ -470,6 +470,9 @@ static int i915_drm_freeze(struct drm_device *dev)
 				"GEM idle failed, resume might fail\n");
 			return error;
 		}
+
+		intel_modeset_disable(dev);
+
 		drm_irq_uninstall(dev);
 	}
 
@@ -543,13 +546,9 @@ static int i915_drm_thaw(struct drm_device *dev)
 		mutex_unlock(&dev->struct_mutex);
 
 		intel_modeset_init_hw(dev);
+		intel_modeset_setup_hw_state(dev);
 		drm_mode_config_reset(dev);
 		drm_irq_install(dev);
-
-		/* Resume the modeset for every activated CRTC */
-		mutex_lock(&dev->mode_config.mutex);
-		drm_helper_resume_force_mode(dev);
-		mutex_unlock(&dev->mode_config.mutex);
 	}
 
 	intel_opregion_init(dev);

drivers/gpu/drm/i915/i915_drv.h

@@ -241,7 +241,6 @@ struct drm_i915_error_state {
 };
 
 struct drm_i915_display_funcs {
-	void (*dpms)(struct drm_crtc *crtc, int mode);
 	bool (*fbc_enabled)(struct drm_device *dev);
 	void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
 	void (*disable_fbc)(struct drm_device *dev);
@@ -257,6 +256,8 @@ struct drm_i915_display_funcs {
 			     struct drm_display_mode *adjusted_mode,
 			     int x, int y,
 			     struct drm_framebuffer *old_fb);
+	void (*crtc_enable)(struct drm_crtc *crtc);
+	void (*crtc_disable)(struct drm_crtc *crtc);
 	void (*off)(struct drm_crtc *crtc);
 	void (*write_eld)(struct drm_connector *connector,
 			  struct drm_crtc *crtc);
@@ -1550,6 +1551,7 @@ extern void intel_modeset_init(struct drm_device *dev);
 extern void intel_modeset_gem_init(struct drm_device *dev);
 extern void intel_modeset_cleanup(struct drm_device *dev);
 extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
+extern void intel_modeset_setup_hw_state(struct drm_device *dev);
 extern bool intel_fbc_enabled(struct drm_device *dev);
 extern void intel_disable_fbc(struct drm_device *dev);
 extern bool ironlake_set_drps(struct drm_device *dev, u8 val);

drivers/gpu/drm/i915/i915_reg.h

@@ -4037,6 +4037,8 @@
 #define  PORT_TRANS_C_SEL_CPT	(2<<29)
 #define  PORT_TRANS_SEL_MASK	(3<<29)
 #define  PORT_TRANS_SEL_CPT(pipe)	((pipe) << 29)
+#define  PORT_TO_PIPE(val)	(((val) & (1<<30)) >> 30)
+#define  PORT_TO_PIPE_CPT(val)	(((val) & PORT_TRANS_SEL_MASK) >> 29)
 
 #define TRANS_DP_CTL_A		0xe0300
 #define TRANS_DP_CTL_B		0xe1300

drivers/gpu/drm/i915/intel_crt.c

@@ -61,42 +61,63 @@ static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
 	return container_of(encoder, struct intel_crt, base);
 }
 
-static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
+static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
+				   enum pipe *pipe)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+	u32 tmp;
+
+	tmp = I915_READ(crt->adpa_reg);
+
+	if (!(tmp & ADPA_DAC_ENABLE))
+		return false;
+
+	if (HAS_PCH_CPT(dev))
+		*pipe = PORT_TO_PIPE_CPT(tmp);
+	else
+		*pipe = PORT_TO_PIPE(tmp);
+
+	return true;
+}
+
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
 	u32 temp;
 
-	temp = I915_READ(PCH_ADPA);
+	temp = I915_READ(crt->adpa_reg);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 	temp &= ~ADPA_DAC_ENABLE;
+	I915_WRITE(crt->adpa_reg, temp);
+}
 
-	switch (mode) {
-	case DRM_MODE_DPMS_ON:
-		temp |= ADPA_DAC_ENABLE;
-		break;
-	case DRM_MODE_DPMS_STANDBY:
-	case DRM_MODE_DPMS_SUSPEND:
-	case DRM_MODE_DPMS_OFF:
-		/* Just leave port enable cleared */
-		break;
-	}
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+	u32 temp;
 
-	I915_WRITE(PCH_ADPA, temp);
+	temp = I915_READ(crt->adpa_reg);
+	temp |= ADPA_DAC_ENABLE;
+	I915_WRITE(crt->adpa_reg, temp);
 }
 
-static void gmch_crt_dpms(struct drm_encoder *encoder, int mode)
+/* Note: The caller is required to filter out dpms modes not supported by the
+ * platform. */
+static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
 	u32 temp;
 
-	temp = I915_READ(ADPA);
+	temp = I915_READ(crt->adpa_reg);
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 	temp &= ~ADPA_DAC_ENABLE;
 
-	if (IS_VALLEYVIEW(dev) && mode != DRM_MODE_DPMS_ON)
-		mode = DRM_MODE_DPMS_OFF;
-
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
 		temp |= ADPA_DAC_ENABLE;
@@ -112,7 +133,51 @@ static void gmch_crt_dpms(struct drm_encoder *encoder, int mode)
 		break;
 	}
 
-	I915_WRITE(ADPA, temp);
+	I915_WRITE(crt->adpa_reg, temp);
+}
+
+static void intel_crt_dpms(struct drm_connector *connector, int mode)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_encoder *encoder = intel_attached_encoder(connector);
+	struct drm_crtc *crtc;
+	int old_dpms;
+
+	/* PCH platforms and VLV only support on/off. */
+	if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	old_dpms = connector->dpms;
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	crtc = encoder->base.crtc;
+	if (!crtc) {
+		encoder->connectors_active = false;
+		return;
+	}
+
+	/* We need the pipe to run for anything but OFF. */
+	if (mode == DRM_MODE_DPMS_OFF)
+		encoder->connectors_active = false;
+	else
+		encoder->connectors_active = true;
+
+	if (mode < old_dpms) {
+		/* From off to on, enable the pipe first. */
+		intel_crtc_update_dpms(crtc);
+
+		intel_crt_set_dpms(encoder, mode);
+	} else {
+		intel_crt_set_dpms(encoder, mode);
+
+		intel_crtc_update_dpms(crtc);
+	}
+
+	intel_modeset_check_state(connector->dev);
 }
 
 static int intel_crt_mode_valid(struct drm_connector *connector,
@@ -603,25 +668,15 @@ static void intel_crt_reset(struct drm_connector *connector)
  * Routines for controlling stuff on the analog port
  */
 
-static const struct drm_encoder_helper_funcs pch_encoder_funcs = {
+static const struct drm_encoder_helper_funcs crt_encoder_funcs = {
 	.mode_fixup = intel_crt_mode_fixup,
-	.prepare = intel_encoder_prepare,
-	.commit = intel_encoder_commit,
 	.mode_set = intel_crt_mode_set,
-	.dpms = pch_crt_dpms,
-};
-
-static const struct drm_encoder_helper_funcs gmch_encoder_funcs = {
-	.mode_fixup = intel_crt_mode_fixup,
-	.prepare = intel_encoder_prepare,
-	.commit = intel_encoder_commit,
-	.mode_set = intel_crt_mode_set,
-	.dpms = gmch_crt_dpms,
+	.disable = intel_encoder_noop,
 };
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 	.reset = intel_crt_reset,
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_crt_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.destroy = intel_crt_destroy,
@@ -662,7 +717,6 @@ void intel_crt_init(struct drm_device *dev)
 	struct intel_crt *crt;
 	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	const struct drm_encoder_helper_funcs *encoder_helper_funcs;
 
 	/* Skip machines without VGA that falsely report hotplug events */
 	if (dmi_check_system(intel_no_crt))
@@ -700,11 +754,6 @@ void intel_crt_init(struct drm_device *dev)
 		connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
-	if (HAS_PCH_SPLIT(dev))
-		encoder_helper_funcs = &pch_encoder_funcs;
-	else
-		encoder_helper_funcs = &gmch_encoder_funcs;
-
 	if (HAS_PCH_SPLIT(dev))
 		crt->adpa_reg = PCH_ADPA;
 	else if (IS_VALLEYVIEW(dev))
@@ -712,7 +761,12 @@ void intel_crt_init(struct drm_device *dev)
 	else
 		crt->adpa_reg = ADPA;
 
-	drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
+	crt->base.disable = intel_disable_crt;
+	crt->base.enable = intel_enable_crt;
+	crt->base.get_hw_state = intel_crt_get_hw_state;
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
+
+	drm_encoder_helper_add(&crt->base.base, &crt_encoder_funcs);
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
 	drm_sysfs_connector_add(connector);

drivers/gpu/drm/i915/intel_ddi.c

@@ -757,26 +757,63 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
 	intel_hdmi->set_infoframes(encoder, adjusted_mode);
 }
 
-void intel_ddi_dpms(struct drm_encoder *encoder, int mode)
+bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
+			    enum pipe *pipe)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	u32 tmp;
+	int i;
+
+	tmp = I915_READ(DDI_BUF_CTL(intel_hdmi->ddi_port));
+
+	if (!(tmp & DDI_BUF_CTL_ENABLE))
+		return false;
+
+	for_each_pipe(i) {
+		tmp = I915_READ(DDI_FUNC_CTL(i));
+
+		if ((tmp & PIPE_DDI_PORT_MASK)
+		    == PIPE_DDI_SELECT_PORT(intel_hdmi->ddi_port)) {
+			*pipe = i;
+			return true;
+		}
+	}
+
+	DRM_DEBUG_KMS("No pipe for ddi port %i found\n", intel_hdmi->ddi_port);
+
+	return true;
+}
+
+void intel_enable_ddi(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
 	int port = intel_hdmi->ddi_port;
 	u32 temp;
 
 	temp = I915_READ(DDI_BUF_CTL(port));
-
-	if (mode != DRM_MODE_DPMS_ON) {
-		temp &= ~DDI_BUF_CTL_ENABLE;
-	} else {
-		temp |= DDI_BUF_CTL_ENABLE;
-	}
+	temp |= DDI_BUF_CTL_ENABLE;
 
 	/* Enable DDI_BUF_CTL. In HDMI/DVI mode, the port width,
 	 * and swing/emphasis values are ignored so nothing special needs
 	 * to be done besides enabling the port.
 	 */
-	I915_WRITE(DDI_BUF_CTL(port),
-			temp);
+	I915_WRITE(DDI_BUF_CTL(port), temp);
+}
+
+void intel_disable_ddi(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	int port = intel_hdmi->ddi_port;
+	u32 temp;
+
+	temp = I915_READ(DDI_BUF_CTL(port));
+	temp &= ~DDI_BUF_CTL_ENABLE;
+
+	I915_WRITE(DDI_BUF_CTL(port), temp);
 }

drivers/gpu/drm/i915/intel_dp.c

@@ -1248,10 +1248,57 @@ static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 	}
 }
 
-static void intel_dp_prepare(struct drm_encoder *encoder)
+static bool intel_dp_get_hw_state(struct intel_encoder *encoder,
+				  enum pipe *pipe)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 tmp = I915_READ(intel_dp->output_reg);
+
+	if (!(tmp & DP_PORT_EN))
+		return false;
 
+	if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) {
+		*pipe = PORT_TO_PIPE_CPT(tmp);
+	} else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+		*pipe = PORT_TO_PIPE(tmp);
+	} else {
+		u32 trans_sel;
+		u32 trans_dp;
+		int i;
+
+		switch (intel_dp->output_reg) {
+		case PCH_DP_B:
+			trans_sel = TRANS_DP_PORT_SEL_B;
+			break;
+		case PCH_DP_C:
+			trans_sel = TRANS_DP_PORT_SEL_C;
+			break;
+		case PCH_DP_D:
+			trans_sel = TRANS_DP_PORT_SEL_D;
+			break;
+		default:
+			return true;
+		}
+
+		for_each_pipe(i) {
+			trans_dp = I915_READ(TRANS_DP_CTL(i));
+			if ((trans_dp & TRANS_DP_PORT_SEL_MASK) == trans_sel) {
+				*pipe = i;
+				return true;
+			}
+		}
+	}
+
+	DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n", intel_dp->output_reg);
+
+	return true;
+}
+
+static void intel_disable_dp(struct intel_encoder *encoder)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 
 	/* Make sure the panel is off before trying to change the mode. But also
 	 * ensure that we have vdd while we switch off the panel. */
@@ -1262,60 +1309,58 @@ static void intel_dp_prepare(struct drm_encoder *encoder)
 	intel_dp_link_down(intel_dp);
 }
 
-static void intel_dp_commit(struct drm_encoder *encoder)
+static void intel_enable_dp(struct intel_encoder *encoder)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct drm_device *dev = encoder->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
 
 	ironlake_edp_panel_vdd_on(intel_dp);
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
-	intel_dp_start_link_train(intel_dp);
-	ironlake_edp_panel_on(intel_dp);
-	ironlake_edp_panel_vdd_off(intel_dp, true);
-	intel_dp_complete_link_train(intel_dp);
+	if (!(dp_reg & DP_PORT_EN)) {
+		intel_dp_start_link_train(intel_dp);
+		ironlake_edp_panel_on(intel_dp);
+		ironlake_edp_panel_vdd_off(intel_dp, true);
+		intel_dp_complete_link_train(intel_dp);
+	} else
+		ironlake_edp_panel_vdd_off(intel_dp, false);
 	ironlake_edp_backlight_on(intel_dp);
-
-	intel_dp->dpms_mode = DRM_MODE_DPMS_ON;
-
-	if (HAS_PCH_CPT(dev))
-		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
 }
 
 static void
-intel_dp_dpms(struct drm_encoder *encoder, int mode)
+intel_dp_dpms(struct drm_connector *connector, int mode)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct drm_device *dev = encoder->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+
+	/* DP supports only 2 dpms states. */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	if (!intel_dp->base.base.crtc) {
+		intel_dp->base.connectors_active = false;
+		return;
+	}
 
 	if (mode != DRM_MODE_DPMS_ON) {
-		/* Switching the panel off requires vdd. */
-		ironlake_edp_panel_vdd_on(intel_dp);
-		ironlake_edp_backlight_off(intel_dp);
-		intel_dp_sink_dpms(intel_dp, mode);
-		ironlake_edp_panel_off(intel_dp);
-		intel_dp_link_down(intel_dp);
+		intel_encoder_dpms(&intel_dp->base, mode);
 
 		if (is_cpu_edp(intel_dp))
-			ironlake_edp_pll_off(encoder);
+			ironlake_edp_pll_off(&intel_dp->base.base);
 	} else {
 		if (is_cpu_edp(intel_dp))
-			ironlake_edp_pll_on(encoder);
+			ironlake_edp_pll_on(&intel_dp->base.base);
 
-		ironlake_edp_panel_vdd_on(intel_dp);
-		intel_dp_sink_dpms(intel_dp, mode);
-		if (!(dp_reg & DP_PORT_EN)) {
-			intel_dp_start_link_train(intel_dp);
-			ironlake_edp_panel_on(intel_dp);
-			ironlake_edp_panel_vdd_off(intel_dp, true);
-			intel_dp_complete_link_train(intel_dp);
-		} else
-			ironlake_edp_panel_vdd_off(intel_dp, false);
-		ironlake_edp_backlight_on(intel_dp);
+		intel_encoder_dpms(&intel_dp->base, mode);
 	}
-	intel_dp->dpms_mode = mode;
+
+	intel_modeset_check_state(connector->dev);
 }
 
 /*
@@ -2016,10 +2061,10 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 	u8 sink_irq_vector;
 	u8 link_status[DP_LINK_STATUS_SIZE];
 
-	if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON)
+	if (!intel_dp->base.connectors_active)
 		return;
 
-	if (!intel_dp->base.base.crtc)
+	if (WARN_ON(!intel_dp->base.base.crtc))
 		return;
 
 	/* Try to read receiver status if the link appears to be up */
@@ -2305,9 +2350,8 @@ intel_dp_set_property(struct drm_connector *connector,
 done:
 	if (intel_dp->base.base.crtc) {
 		struct drm_crtc *crtc = intel_dp->base.base.crtc;
-		drm_crtc_helper_set_mode(crtc, &crtc->mode,
-					 crtc->x, crtc->y,
-					 crtc->fb);
+		intel_set_mode(crtc, &crtc->mode,
+			       crtc->x, crtc->y, crtc->fb);
 	}
 
 	return 0;
@@ -2341,15 +2385,13 @@ static void intel_dp_encoder_destroy(struct drm_encoder *encoder)
 }
 
 static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
-	.dpms = intel_dp_dpms,
 	.mode_fixup = intel_dp_mode_fixup,
-	.prepare = intel_dp_prepare,
 	.mode_set = intel_dp_mode_set,
-	.commit = intel_dp_commit,
+	.disable = intel_encoder_noop,
 };
 
 static const struct drm_connector_funcs intel_dp_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_dp_dpms,
 	.detect = intel_dp_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_dp_set_property,
@@ -2436,7 +2478,6 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 
 	intel_dp->output_reg = output_reg;
 	intel_dp->port = port;
-	intel_dp->dpms_mode = -1;
 
 	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 	if (!intel_connector) {
@@ -2480,6 +2521,11 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	drm_sysfs_connector_add(connector);
 
+	intel_encoder->enable = intel_enable_dp;
+	intel_encoder->disable = intel_disable_dp;
+	intel_encoder->get_hw_state = intel_dp_get_hw_state;
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
+
 	/* Set up the DDC bus. */
 	switch (port) {
 	case PORT_A:

drivers/gpu/drm/i915/intel_drv.h

@@ -137,6 +137,12 @@ struct intel_fbdev {
 
 struct intel_encoder {
 	struct drm_encoder base;
+	/*
+	 * The new crtc this encoder will be driven from. Only differs from
+	 * base->crtc while a modeset is in progress.
+	 */
+	struct intel_crtc *new_crtc;
+
 	int type;
 	bool needs_tv_clock;
 	/*
@@ -144,13 +150,33 @@ struct intel_encoder {
 	 * simple flag is enough to compute the possible_clones mask.
 	 */
 	bool cloneable;
+	bool connectors_active;
 	void (*hot_plug)(struct intel_encoder *);
+	void (*enable)(struct intel_encoder *);
+	void (*disable)(struct intel_encoder *);
+	/* Read out the current hw state of this connector, returning true if
+	 * the encoder is active. If the encoder is enabled it also set the pipe
+	 * it is connected to in the pipe parameter. */
+	bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
 	int crtc_mask;
 };
 
 struct intel_connector {
 	struct drm_connector base;
+	/*
+	 * The fixed encoder this connector is connected to.
+	 */
 	struct intel_encoder *encoder;
+
+	/*
+	 * The new encoder this connector will be driven. Only differs from
+	 * encoder while a modeset is in progress.
+	 */
+	struct intel_encoder *new_encoder;
+
+	/* Reads out the current hw, returning true if the connector is enabled
+	 * and active (i.e. dpms ON state). */
+	bool (*get_hw_state)(struct intel_connector *);
 };
 
 struct intel_crtc {
@@ -158,8 +184,12 @@ struct intel_crtc {
 	enum pipe pipe;
 	enum plane plane;
 	u8 lut_r[256], lut_g[256], lut_b[256];
-	int dpms_mode;
-	bool active; /* is the crtc on? independent of the dpms mode */
+	/*
+	 * Whether the crtc and the connected output pipeline is active. Implies
+	 * that crtc->enabled is set, i.e. the current mode configuration has
+	 * some outputs connected to this crtc.
+	 */
+	bool active;
 	bool primary_disabled; /* is the crtc obscured by a plane? */
 	bool lowfreq_avail;
 	struct intel_overlay *overlay;
@@ -311,7 +341,6 @@ struct intel_dp {
 	enum hdmi_force_audio force_audio;
 	enum port port;
 	uint32_t color_range;
-	int dpms_mode;
 	uint8_t link_bw;
 	uint8_t lane_count;
 	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
@@ -413,10 +442,27 @@ extern void intel_panel_disable_backlight(struct drm_device *dev);
 extern void intel_panel_destroy_backlight(struct drm_device *dev);
 extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
 
+struct intel_set_config {
+	struct drm_encoder **save_connector_encoders;
+	struct drm_crtc **save_encoder_crtcs;
+
+	bool fb_changed;
+	bool mode_changed;
+};
+
+extern bool intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
+			   int x, int y, struct drm_framebuffer *old_fb);
+extern void intel_modeset_disable(struct drm_device *dev);
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
-extern void intel_encoder_prepare(struct drm_encoder *encoder);
-extern void intel_encoder_commit(struct drm_encoder *encoder);
+extern void intel_crtc_update_dpms(struct drm_crtc *crtc);
+extern void intel_encoder_noop(struct drm_encoder *encoder);
 extern void intel_encoder_destroy(struct drm_encoder *encoder);
+extern void intel_encoder_dpms(struct intel_encoder *encoder, int mode);
+extern bool intel_encoder_check_is_cloned(struct intel_encoder *encoder);
+extern void intel_connector_dpms(struct drm_connector *, int mode);
+extern bool intel_connector_get_hw_state(struct intel_connector *connector);
+extern void intel_modeset_check_state(struct drm_device *dev);
+
 
 static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector)
 {
@@ -523,7 +569,10 @@ extern void intel_disable_gt_powersave(struct drm_device *dev);
 extern void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv);
 extern void ironlake_teardown_rc6(struct drm_device *dev);
 
-extern void intel_ddi_dpms(struct drm_encoder *encoder, int mode);
+extern void intel_enable_ddi(struct intel_encoder *encoder);
+extern void intel_disable_ddi(struct intel_encoder *encoder);
+extern bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
+				   enum pipe *pipe);
 extern void intel_ddi_mode_set(struct drm_encoder *encoder,
 				struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode);

drivers/gpu/drm/i915/intel_dvo.c

@@ -105,22 +105,91 @@ static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
 			    struct intel_dvo, base);
 }
 
-static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
+static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
 {
-	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
-	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
+	struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base);
+
+	return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
+}
+
+static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,
+				   enum pipe *pipe)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base);
+	u32 tmp;
+
+	tmp = I915_READ(intel_dvo->dev.dvo_reg);
+
+	if (!(tmp & DVO_ENABLE))
+		return false;
+
+	*pipe = PORT_TO_PIPE(tmp);
+
+	return true;
+}
+
+static void intel_disable_dvo(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base);
+	u32 dvo_reg = intel_dvo->dev.dvo_reg;
+	u32 temp = I915_READ(dvo_reg);
+
+	intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
+	I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
+	I915_READ(dvo_reg);
+}
+
+static void intel_enable_dvo(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base);
 	u32 dvo_reg = intel_dvo->dev.dvo_reg;
 	u32 temp = I915_READ(dvo_reg);
 
+	I915_WRITE(dvo_reg, temp | DVO_ENABLE);
+	I915_READ(dvo_reg);
+	intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
+}
+
+static void intel_dvo_dpms(struct drm_connector *connector, int mode)
+{
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+	struct drm_crtc *crtc;
+
+	/* dvo supports only 2 dpms states. */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	crtc = intel_dvo->base.base.crtc;
+	if (!crtc) {
+		intel_dvo->base.connectors_active = false;
+		return;
+	}
+
 	if (mode == DRM_MODE_DPMS_ON) {
-		I915_WRITE(dvo_reg, temp | DVO_ENABLE);
-		I915_READ(dvo_reg);
+		intel_dvo->base.connectors_active = true;
+
+		intel_crtc_update_dpms(crtc);
+
 		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 	} else {
 		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
-		I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
-		I915_READ(dvo_reg);
+
+		intel_dvo->base.connectors_active = false;
+
+		intel_crtc_update_dpms(crtc);
 	}
+
+	intel_modeset_check_state(connector->dev);
 }
 
 static int intel_dvo_mode_valid(struct drm_connector *connector,
@@ -275,15 +344,13 @@ static void intel_dvo_destroy(struct drm_connector *connector)
 }
 
 static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
-	.dpms = intel_dvo_dpms,
 	.mode_fixup = intel_dvo_mode_fixup,
-	.prepare = intel_encoder_prepare,
 	.mode_set = intel_dvo_mode_set,
-	.commit = intel_encoder_commit,
+	.disable = intel_encoder_noop,
 };
 
 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_dvo_dpms,
 	.detect = intel_dvo_detect,
 	.destroy = intel_dvo_destroy,
 	.fill_modes = drm_helper_probe_single_connector_modes,
@@ -372,6 +439,11 @@ void intel_dvo_init(struct drm_device *dev)
 	drm_encoder_init(dev, &intel_encoder->base,
 			 &intel_dvo_enc_funcs, encoder_type);
 
+	intel_encoder->disable = intel_disable_dvo;
+	intel_encoder->enable = intel_enable_dvo;
+	intel_encoder->get_hw_state = intel_dvo_get_hw_state;
+	intel_connector->get_hw_state = intel_dvo_connector_get_hw_state;
+
 	/* Now, try to find a controller */
 	for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
 		struct drm_connector *connector = &intel_connector->base;

drivers/gpu/drm/i915/intel_hdmi.c

@@ -601,11 +601,32 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder,
 	intel_hdmi->set_infoframes(encoder, adjusted_mode);
 }
 
-static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
+static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
+				    enum pipe *pipe)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	u32 tmp;
+
+	tmp = I915_READ(intel_hdmi->sdvox_reg);
+
+	if (!(tmp & SDVO_ENABLE))
+		return false;
+
+	if (HAS_PCH_CPT(dev))
+		*pipe = PORT_TO_PIPE_CPT(tmp);
+	else
+		*pipe = PORT_TO_PIPE(tmp);
+
+	return true;
+}
+
+static void intel_enable_hdmi(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
 	u32 temp;
 	u32 enable_bits = SDVO_ENABLE;
 
@@ -617,31 +638,12 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
 	/* HW workaround for IBX, we need to move the port to transcoder A
 	 * before disabling it. */
 	if (HAS_PCH_IBX(dev)) {
-		struct drm_crtc *crtc = encoder->crtc;
+		struct drm_crtc *crtc = encoder->base.crtc;
 		int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
 
-		if (mode != DRM_MODE_DPMS_ON) {
-			if (temp & SDVO_PIPE_B_SELECT) {
-				temp &= ~SDVO_PIPE_B_SELECT;
-				I915_WRITE(intel_hdmi->sdvox_reg, temp);
-				POSTING_READ(intel_hdmi->sdvox_reg);
-
-				/* Again we need to write this twice. */
-				I915_WRITE(intel_hdmi->sdvox_reg, temp);
-				POSTING_READ(intel_hdmi->sdvox_reg);
-
-				/* Transcoder selection bits only update
-				 * effectively on vblank. */
-				if (crtc)
-					intel_wait_for_vblank(dev, pipe);
-				else
-					msleep(50);
-			}
-		} else {
-			/* Restore the transcoder select bit. */
-			if (pipe == PIPE_B)
-				enable_bits |= SDVO_PIPE_B_SELECT;
-		}
+		/* Restore the transcoder select bit. */
+		if (pipe == PIPE_B)
+			enable_bits |= SDVO_PIPE_B_SELECT;
 	}
 
 	/* HW workaround, need to toggle enable bit off and on for 12bpc, but
@@ -652,11 +654,66 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
 		POSTING_READ(intel_hdmi->sdvox_reg);
 	}
 
-	if (mode != DRM_MODE_DPMS_ON) {
-		temp &= ~enable_bits;
-	} else {
-		temp |= enable_bits;
+	temp |= enable_bits;
+
+	I915_WRITE(intel_hdmi->sdvox_reg, temp);
+	POSTING_READ(intel_hdmi->sdvox_reg);
+
+	/* HW workaround, need to write this twice for issue that may result
+	 * in first write getting masked.
+	 */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(intel_hdmi->sdvox_reg, temp);
+		POSTING_READ(intel_hdmi->sdvox_reg);
 	}
+}
+
+static void intel_disable_hdmi(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	u32 temp;
+	u32 enable_bits = SDVO_ENABLE;
+
+	if (intel_hdmi->has_audio)
+		enable_bits |= SDVO_AUDIO_ENABLE;
+
+	temp = I915_READ(intel_hdmi->sdvox_reg);
+
+	/* HW workaround for IBX, we need to move the port to transcoder A
+	 * before disabling it. */
+	if (HAS_PCH_IBX(dev)) {
+		struct drm_crtc *crtc = encoder->base.crtc;
+		int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
+
+		if (temp & SDVO_PIPE_B_SELECT) {
+			temp &= ~SDVO_PIPE_B_SELECT;
+			I915_WRITE(intel_hdmi->sdvox_reg, temp);
+			POSTING_READ(intel_hdmi->sdvox_reg);
+
+			/* Again we need to write this twice. */
+			I915_WRITE(intel_hdmi->sdvox_reg, temp);
+			POSTING_READ(intel_hdmi->sdvox_reg);
+
+			/* Transcoder selection bits only update
+			 * effectively on vblank. */
+			if (crtc)
+				intel_wait_for_vblank(dev, pipe);
+			else
+				msleep(50);
+		}
+	}
+
+	/* HW workaround, need to toggle enable bit off and on for 12bpc, but
+	 * we do this anyway which shows more stable in testing.
+	 */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_ENABLE);
+		POSTING_READ(intel_hdmi->sdvox_reg);
+	}
+
+	temp &= ~enable_bits;
 
 	I915_WRITE(intel_hdmi->sdvox_reg, temp);
 	POSTING_READ(intel_hdmi->sdvox_reg);
@@ -830,9 +887,8 @@ intel_hdmi_set_property(struct drm_connector *connector,
 done:
 	if (intel_hdmi->base.base.crtc) {
 		struct drm_crtc *crtc = intel_hdmi->base.base.crtc;
-		drm_crtc_helper_set_mode(crtc, &crtc->mode,
-					 crtc->x, crtc->y,
-					 crtc->fb);
+		intel_set_mode(crtc, &crtc->mode,
+			       crtc->x, crtc->y, crtc->fb);
 	}
 
 	return 0;
@@ -846,23 +902,19 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
 }
 
 static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs_hsw = {
-	.dpms = intel_ddi_dpms,
 	.mode_fixup = intel_hdmi_mode_fixup,
-	.prepare = intel_encoder_prepare,
 	.mode_set = intel_ddi_mode_set,
-	.commit = intel_encoder_commit,
+	.disable = intel_encoder_noop,
 };
 
 static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = {
-	.dpms = intel_hdmi_dpms,
 	.mode_fixup = intel_hdmi_mode_fixup,
-	.prepare = intel_encoder_prepare,
 	.mode_set = intel_hdmi_mode_set,
-	.commit = intel_encoder_commit,
+	.disable = intel_encoder_noop,
 };
 
 static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_connector_dpms,
 	.detect = intel_hdmi_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_hdmi_set_property,
@@ -961,10 +1013,21 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg, enum port port)
 		intel_hdmi->set_infoframes = cpt_set_infoframes;
 	}
 
-	if (IS_HASWELL(dev))
-		drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs_hsw);
-	else
-		drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs);
+	if (IS_HASWELL(dev)) {
+		intel_encoder->enable = intel_enable_ddi;
+		intel_encoder->disable = intel_disable_ddi;
+		intel_encoder->get_hw_state = intel_ddi_get_hw_state;
+		drm_encoder_helper_add(&intel_encoder->base,
+				       &intel_hdmi_helper_funcs_hsw);
+	} else {
+		intel_encoder->enable = intel_enable_hdmi;
+		intel_encoder->disable = intel_disable_hdmi;
+		intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
+		drm_encoder_helper_add(&intel_encoder->base,
+				       &intel_hdmi_helper_funcs);
+	}
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
+
 
 	intel_hdmi_add_properties(intel_hdmi, connector);
 

drivers/gpu/drm/i915/intel_lvds.c

@@ -65,13 +65,40 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector)
 			    struct intel_lvds, base);
 }
 
+static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
+				    enum pipe *pipe)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 lvds_reg, tmp;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		lvds_reg = PCH_LVDS;
+	} else {
+		lvds_reg = LVDS;
+	}
+
+	tmp = I915_READ(lvds_reg);
+
+	if (!(tmp & LVDS_PORT_EN))
+		return false;
+
+	if (HAS_PCH_CPT(dev))
+		*pipe = PORT_TO_PIPE_CPT(tmp);
+	else
+		*pipe = PORT_TO_PIPE(tmp);
+
+	return true;
+}
+
 /**
  * Sets the power state for the panel.
  */
-static void intel_lvds_enable(struct intel_lvds *intel_lvds)
+static void intel_enable_lvds(struct intel_encoder *encoder)
 {
-	struct drm_device *dev = intel_lvds->base.base.dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(intel_lvds->base.base.crtc);
+	struct drm_device *dev = encoder->base.dev;
+	struct intel_lvds *intel_lvds = to_intel_lvds(&encoder->base);
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 ctl_reg, lvds_reg, stat_reg;
 
@@ -111,9 +138,10 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds)
 	intel_panel_enable_backlight(dev, intel_crtc->pipe);
 }
 
-static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+static void intel_disable_lvds(struct intel_encoder *encoder)
 {
-	struct drm_device *dev = intel_lvds->base.base.dev;
+	struct drm_device *dev = encoder->base.dev;
+	struct intel_lvds *intel_lvds = to_intel_lvds(&encoder->base);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 ctl_reg, lvds_reg, stat_reg;
 
@@ -142,18 +170,6 @@ static void intel_lvds_disable(struct intel_lvds *intel_lvds)
 	POSTING_READ(lvds_reg);
 }
 
-static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
-{
-	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
-	if (mode == DRM_MODE_DPMS_ON)
-		intel_lvds_enable(intel_lvds);
-	else
-		intel_lvds_disable(intel_lvds);
-
-	/* XXX: We never power down the LVDS pairs. */
-}
-
 static int intel_lvds_mode_valid(struct drm_connector *connector,
 				 struct drm_display_mode *mode)
 {
@@ -234,9 +250,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
 	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-	struct intel_encoder *tmp_encoder;
+	struct intel_crtc *intel_crtc = intel_lvds->base.new_crtc;
 	u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
 	int pipe;
 
@@ -246,14 +261,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 		return false;
 	}
 
-	/* Should never happen!! */
-	for_each_encoder_on_crtc(dev, encoder->crtc, tmp_encoder) {
-		if (&tmp_encoder->base != encoder) {
-			DRM_ERROR("Can't enable LVDS and another "
-			       "encoder on the same pipe\n");
-			return false;
-		}
-	}
+	if (intel_encoder_check_is_cloned(&intel_lvds->base))
+		return false;
 
 	/*
 	 * We have timings from the BIOS for the panel, put them in
@@ -405,23 +414,6 @@ out:
 	return true;
 }
 
-static void intel_lvds_prepare(struct drm_encoder *encoder)
-{
-	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
-	intel_lvds_disable(intel_lvds);
-}
-
-static void intel_lvds_commit(struct drm_encoder *encoder)
-{
-	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
-	/* Always do a full power on as we do not know what state
-	 * we were left in.
-	 */
-	intel_lvds_enable(intel_lvds);
-}
-
 static void intel_lvds_mode_set(struct drm_encoder *encoder,
 				struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode)
@@ -587,8 +579,8 @@ static int intel_lvds_set_property(struct drm_connector *connector,
 			 * If the CRTC is enabled, the display will be changed
 			 * according to the new panel fitting mode.
 			 */
-			drm_crtc_helper_set_mode(crtc, &crtc->mode,
-				crtc->x, crtc->y, crtc->fb);
+			intel_set_mode(crtc, &crtc->mode,
+				       crtc->x, crtc->y, crtc->fb);
 		}
 	}
 
@@ -596,11 +588,9 @@ static int intel_lvds_set_property(struct drm_connector *connector,
 }
 
 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
-	.dpms = intel_lvds_dpms,
 	.mode_fixup = intel_lvds_mode_fixup,
-	.prepare = intel_lvds_prepare,
 	.mode_set = intel_lvds_mode_set,
-	.commit = intel_lvds_commit,
+	.disable = intel_encoder_noop,
 };
 
 static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
@@ -610,7 +600,7 @@ static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs
 };
 
 static const struct drm_connector_funcs intel_lvds_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_connector_dpms,
 	.detect = intel_lvds_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_lvds_set_property,
@@ -964,6 +954,11 @@ bool intel_lvds_init(struct drm_device *dev)
 	drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs,
 			 DRM_MODE_ENCODER_LVDS);
 
+	intel_encoder->enable = intel_enable_lvds;
+	intel_encoder->disable = intel_disable_lvds;
+	intel_encoder->get_hw_state = intel_lvds_get_hw_state;
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
+
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	intel_encoder->type = INTEL_OUTPUT_LVDS;
 

drivers/gpu/drm/i915/intel_sdvo.c

@@ -628,6 +628,14 @@ static bool intel_sdvo_set_active_outputs(struct intel_sdvo *intel_sdvo,
 				    &outputs, sizeof(outputs));
 }
 
+static bool intel_sdvo_get_active_outputs(struct intel_sdvo *intel_sdvo,
+					  u16 *outputs)
+{
+	return intel_sdvo_get_value(intel_sdvo,
+				    SDVO_CMD_GET_ACTIVE_OUTPUTS,
+				    outputs, sizeof(*outputs));
+}
+
 static bool intel_sdvo_set_encoder_power_state(struct intel_sdvo *intel_sdvo,
 					       int mode)
 {
@@ -1142,51 +1150,132 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 	intel_sdvo_write_sdvox(intel_sdvo, sdvox);
 }
 
-static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
+static bool intel_sdvo_connector_get_hw_state(struct intel_connector *connector)
 {
-	struct drm_device *dev = encoder->dev;
+	struct intel_sdvo_connector *intel_sdvo_connector =
+		to_intel_sdvo_connector(&connector->base);
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(&connector->base);
+	u16 active_outputs;
+
+	intel_sdvo_get_active_outputs(intel_sdvo, &active_outputs);
+
+	if (active_outputs & intel_sdvo_connector->output_flag)
+		return true;
+	else
+		return false;
+}
+
+static bool intel_sdvo_get_hw_state(struct intel_encoder *encoder,
+				    enum pipe *pipe)
+{
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+	u32 tmp;
+
+	tmp = I915_READ(intel_sdvo->sdvo_reg);
+
+	if (!(tmp & SDVO_ENABLE))
+		return false;
+
+	if (HAS_PCH_CPT(dev))
+		*pipe = PORT_TO_PIPE_CPT(tmp);
+	else
+		*pipe = PORT_TO_PIPE(tmp);
+
+	return true;
+}
+
+static void intel_disable_sdvo(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+	u32 temp;
+
+	intel_sdvo_set_active_outputs(intel_sdvo, 0);
+	if (0)
+		intel_sdvo_set_encoder_power_state(intel_sdvo,
+						   DRM_MODE_DPMS_OFF);
+
+	temp = I915_READ(intel_sdvo->sdvo_reg);
+	if ((temp & SDVO_ENABLE) != 0) {
+		intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
+	}
+}
+
+static void intel_enable_sdvo(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 	u32 temp;
+	bool input1, input2;
+	int i;
+	u8 status;
+
+	temp = I915_READ(intel_sdvo->sdvo_reg);
+	if ((temp & SDVO_ENABLE) == 0)
+		intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
+	for (i = 0; i < 2; i++)
+		intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+	status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
+	/* Warn if the device reported failure to sync.
+	 * A lot of SDVO devices fail to notify of sync, but it's
+	 * a given it the status is a success, we succeeded.
+	 */
+	if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
+		DRM_DEBUG_KMS("First %s output reported failure to "
+				"sync\n", SDVO_NAME(intel_sdvo));
+	}
+
+	if (0)
+		intel_sdvo_set_encoder_power_state(intel_sdvo,
+						   DRM_MODE_DPMS_ON);
+	intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
+}
+
+static void intel_sdvo_dpms(struct drm_connector *connector, int mode)
+{
+	struct drm_crtc *crtc;
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+
+	/* dvo supports only 2 dpms states. */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	crtc = intel_sdvo->base.base.crtc;
+	if (!crtc) {
+		intel_sdvo->base.connectors_active = false;
+		return;
+	}
 
 	if (mode != DRM_MODE_DPMS_ON) {
 		intel_sdvo_set_active_outputs(intel_sdvo, 0);
 		if (0)
 			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
 
-		if (mode == DRM_MODE_DPMS_OFF) {
-			temp = I915_READ(intel_sdvo->sdvo_reg);
-			if ((temp & SDVO_ENABLE) != 0) {
-				intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
-			}
-		}
+		intel_sdvo->base.connectors_active = false;
+
+		intel_crtc_update_dpms(crtc);
 	} else {
-		bool input1, input2;
-		int i;
-		u8 status;
-
-		temp = I915_READ(intel_sdvo->sdvo_reg);
-		if ((temp & SDVO_ENABLE) == 0)
-			intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
-		for (i = 0; i < 2; i++)
-			intel_wait_for_vblank(dev, intel_crtc->pipe);
-
-		status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
-		/* Warn if the device reported failure to sync.
-		 * A lot of SDVO devices fail to notify of sync, but it's
-		 * a given it the status is a success, we succeeded.
-		 */
-		if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
-			DRM_DEBUG_KMS("First %s output reported failure to "
-					"sync\n", SDVO_NAME(intel_sdvo));
-		}
+		intel_sdvo->base.connectors_active = true;
+
+		intel_crtc_update_dpms(crtc);
 
 		if (0)
 			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
 		intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
 	}
-	return;
+
+	intel_modeset_check_state(connector->dev);
 }
 
 static int intel_sdvo_mode_valid(struct drm_connector *connector,
@@ -1838,8 +1927,8 @@ set_value:
 done:
 	if (intel_sdvo->base.base.crtc) {
 		struct drm_crtc *crtc = intel_sdvo->base.base.crtc;
-		drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
-					 crtc->y, crtc->fb);
+		intel_set_mode(crtc, &crtc->mode,
+			       crtc->x, crtc->y, crtc->fb);
 	}
 
 	return 0;
@@ -1847,15 +1936,13 @@ done:
 }
 
 static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
-	.dpms = intel_sdvo_dpms,
 	.mode_fixup = intel_sdvo_mode_fixup,
-	.prepare = intel_encoder_prepare,
 	.mode_set = intel_sdvo_mode_set,
-	.commit = intel_encoder_commit,
+	.disable = intel_encoder_noop,
 };
 
 static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_sdvo_dpms,
 	.detect = intel_sdvo_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_sdvo_set_property,
@@ -2027,6 +2114,7 @@ intel_sdvo_connector_init(struct intel_sdvo_connector *connector,
 	connector->base.base.interlace_allowed = 1;
 	connector->base.base.doublescan_allowed = 0;
 	connector->base.base.display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->base.get_hw_state = intel_sdvo_connector_get_hw_state;
 
 	intel_connector_attach_encoder(&connector->base, &encoder->base);
 	drm_sysfs_connector_add(&connector->base.base);
@@ -2578,6 +2666,10 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 
 	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 
+	intel_encoder->disable = intel_disable_sdvo;
+	intel_encoder->enable = intel_enable_sdvo;
+	intel_encoder->get_hw_state = intel_sdvo_get_hw_state;
+
 	/* In default case sdvo lvds is false */
 	if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
 		goto err;

drivers/gpu/drm/i915/intel_tv.c

@@ -836,22 +836,37 @@ static struct intel_tv *intel_attached_tv(struct drm_connector *connector)
 			    base);
 }
 
+static bool
+intel_tv_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 tmp = I915_READ(TV_CTL);
+
+	if (!(tmp & TV_ENC_ENABLE))
+		return false;
+
+	*pipe = PORT_TO_PIPE(tmp);
+
+	return true;
+}
+
 static void
-intel_tv_dpms(struct drm_encoder *encoder, int mode)
+intel_enable_tv(struct intel_encoder *encoder)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	switch (mode) {
-	case DRM_MODE_DPMS_ON:
-		I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE);
-		break;
-	case DRM_MODE_DPMS_STANDBY:
-	case DRM_MODE_DPMS_SUSPEND:
-	case DRM_MODE_DPMS_OFF:
-		I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE);
-		break;
-	}
+	I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE);
+}
+
+static void
+intel_disable_tv(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE);
 }
 
 static const struct tv_mode *
@@ -895,17 +910,14 @@ intel_tv_mode_fixup(struct drm_encoder *encoder,
 		    const struct drm_display_mode *mode,
 		    struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = encoder->dev;
 	struct intel_tv *intel_tv = enc_to_intel_tv(encoder);
 	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
-	struct intel_encoder *other_encoder;
 
 	if (!tv_mode)
 		return false;
 
-	for_each_encoder_on_crtc(dev, encoder->crtc, other_encoder)
-		if (&other_encoder->base != encoder)
-			return false;
+	if (intel_encoder_check_is_cloned(&intel_tv->base))
+		return false;
 
 	adjusted_mode->clock = tv_mode->clock;
 	return true;
@@ -1471,22 +1483,20 @@ intel_tv_set_property(struct drm_connector *connector, struct drm_property *prop
 	}
 
 	if (changed && crtc)
-		drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
-				crtc->y, crtc->fb);
+		intel_set_mode(crtc, &crtc->mode,
+			       crtc->x, crtc->y, crtc->fb);
 out:
 	return ret;
 }
 
 static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = {
-	.dpms = intel_tv_dpms,
 	.mode_fixup = intel_tv_mode_fixup,
-	.prepare = intel_encoder_prepare,
 	.mode_set = intel_tv_mode_set,
-	.commit = intel_encoder_commit,
+	.disable = intel_encoder_noop,
 };
 
 static const struct drm_connector_funcs intel_tv_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_connector_dpms,
 	.detect = intel_tv_detect,
 	.destroy = intel_tv_destroy,
 	.set_property = intel_tv_set_property,
@@ -1616,6 +1626,11 @@ intel_tv_init(struct drm_device *dev)
 	drm_encoder_init(dev, &intel_encoder->base, &intel_tv_enc_funcs,
 			 DRM_MODE_ENCODER_TVDAC);
 
+	intel_encoder->enable = intel_enable_tv;
+	intel_encoder->disable = intel_disable_tv;
+	intel_encoder->get_hw_state = intel_tv_get_hw_state;
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
+
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	intel_encoder->type = INTEL_OUTPUT_TVOUT;
 	intel_encoder->crtc_mask = (1 << 0) | (1 << 1);