Merge remote-tracking branch 'scott/next' into next

Merge some Freescale updates from Scott Wood

Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt

@@ -1,21 +1,20 @@
 * Freescale MSI interrupt controller
 
 Required properties:
-- compatible : compatible list, contains 2 entries,
-  first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
-  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
-  the parent type.
+- compatible : compatible list, may contain one or two entries
+  The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+  "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+  version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+  provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+  should be used. The first entry is optional; the second entry is
+  required.
 
 - reg : It may contain one or two regions. The first region should contain
   the address and the length of the shared message interrupt register set.
-  The second region should contain the address of aliased MSIIR register for
-  platforms that have such an alias.
-
-- msi-available-ranges: use <start count> style section to define which
-  msi interrupt can be used in the 256 msi interrupts. This property is
-  optional, without this, all the 256 MSI interrupts can be used.
-  Each available range must begin and end on a multiple of 32 (i.e.
-  no splitting an individual MSI register or the associated PIC interrupt).
+  The second region should contain the address of aliased MSIIR or MSIIR1
+  register for platforms that have such an alias, if using MSIIR1, the second
+  region must be added because different MSI group has different MSIIR1 offset.
 
 - interrupts : each one of the interrupts here is one entry per 32 MSIs,
   and routed to the host interrupt controller. the interrupts should
@@ -28,6 +27,14 @@ Required properties:
   to MPIC.
 
 Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+  msi interrupt can be used in the 256 msi interrupts. This property is
+  optional, without this, all the MSI interrupts can be used.
+  Each available range must begin and end on a multiple of 32 (i.e.
+  no splitting an individual MSI register or the associated PIC interrupt).
+  MPIC v4.3 does not support this property because the 32 interrupts of an
+  individual register are not continuous when using MSIIR1.
+
 - msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
   is used for MSI messaging.  The address of MSIIR in PCI address space is
   the MSI message address.
@@ -54,6 +61,28 @@ Example:
 		interrupt-parent = <&mpic>;
 	};
 
+	msi@41600 {
+		compatible = "fsl,mpic-msi-v4.3";
+		reg = <0x41600 0x200 0x44148 4>;
+		interrupts = <
+			0xe0 0 0 0
+			0xe1 0 0 0
+			0xe2 0 0 0
+			0xe3 0 0 0
+			0xe4 0 0 0
+			0xe5 0 0 0
+			0xe6 0 0 0
+			0xe7 0 0 0
+			0x100 0 0 0
+			0x101 0 0 0
+			0x102 0 0 0
+			0x103 0 0 0
+			0x104 0 0 0
+			0x105 0 0 0
+			0x106 0 0 0
+			0x107 0 0 0>;
+	};
+
 The Freescale hypervisor and msi-address-64
 -------------------------------------------
 Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The

arch/powerpc/Makefile

@@ -98,7 +98,7 @@ CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
 CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
 
 KBUILD_CPPFLAGS	+= -Iarch/$(ARCH)
-KBUILD_AFLAGS	+= -Iarch/$(ARCH)
+KBUILD_AFLAGS	+= -msoft-float -Iarch/$(ARCH)
 KBUILD_CFLAGS	+= -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)
 
@@ -132,6 +132,21 @@ ifeq ($(CONFIG_6xx),y)
 KBUILD_CFLAGS		+= -mcpu=powerpc
 endif
 
+ifeq ($(CONFIG_E500),y)
+ifeq ($(CONFIG_64BIT),y)
+KBUILD_CFLAGS		+= -mcpu=e5500
+KBUILD_AFLAGS		+= -mcpu=e5500
+else
+ifeq ($(CONFIG_PPC_E500MC),y)
+KBUILD_CFLAGS		+= -mcpu=e500mc
+KBUILD_AFLAGS		+= -mcpu=e500mc
+else
+KBUILD_CFLAGS		+= -mcpu=8540
+KBUILD_AFLAGS		+= -mcpu=8540
+endif
+endif
+endif
+
 # Work around a gcc code-gen bug with -fno-omit-frame-pointer.
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 KBUILD_CFLAGS		+= -mno-sched-epilog
@@ -139,7 +154,6 @@ endif
 
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_ALTIVEC)	+= -Wa,-maltivec
-cpu-as-$(CONFIG_E500)		+= -Wa,-me500
 cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 
 KBUILD_AFLAGS += $(cpu-as-y)

arch/powerpc/boot/dts/b4420qds.dts

@@ -33,7 +33,7 @@
  */
 
 /include/ "fsl/b4420si-pre.dtsi"
-/include/ "b4qds.dts"
+/include/ "b4qds.dtsi"
 
 / {
 	model = "fsl,B4420QDS";

arch/powerpc/boot/dts/b4860qds.dts

@@ -33,7 +33,7 @@
  */
 
 /include/ "fsl/b4860si-pre.dtsi"
-/include/ "b4qds.dts"
+/include/ "b4qds.dtsi"
 
 / {
 	model = "fsl,B4860QDS";

arch/powerpc/boot/dts/fsl/b4si-post.dtsi

@@ -204,7 +204,7 @@
 		};
 	};
 
-/include/ "qoriq-mpic.dtsi"
+/include/ "qoriq-mpic4.3.dtsi"
 
 	guts: global-utilities@e0000 {
 		compatible = "fsl,b4-device-config";

arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi

@@ -0,0 +1,149 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic";
+	device_type = "open-pic";
+	clock-frequency = <0x0>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi0: msi@41600 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41600 0x200 0x44148 4>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0
+		0x100 0 0 0
+		0x101 0 0 0
+		0x102 0 0 0
+		0x103 0 0 0
+		0x104 0 0 0
+		0x105 0 0 0
+		0x106 0 0 0
+		0x107 0 0 0>;
+};
+
+msi1: msi@41800 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41800 0x200 0x45148 4>;
+	interrupts = <
+		0xe8 0 0 0
+		0xe9 0 0 0
+		0xea 0 0 0
+		0xeb 0 0 0
+		0xec 0 0 0
+		0xed 0 0 0
+		0xee 0 0 0
+		0xef 0 0 0
+		0x108 0 0 0
+		0x109 0 0 0
+		0x10a 0 0 0
+		0x10b 0 0 0
+		0x10c 0 0 0
+		0x10d 0 0 0
+		0x10e 0 0 0
+		0x10f 0 0 0>;
+};
+
+msi2: msi@41a00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41a00 0x200 0x46148 4>;
+	interrupts = <
+		0xf0 0 0 0
+		0xf1 0 0 0
+		0xf2 0 0 0
+		0xf3 0 0 0
+		0xf4 0 0 0
+		0xf5 0 0 0
+		0xf6 0 0 0
+		0xf7 0 0 0
+		0x110 0 0 0
+		0x111 0 0 0
+		0x112 0 0 0
+		0x113 0 0 0
+		0x114 0 0 0
+		0x115 0 0 0
+		0x116 0 0 0
+		0x117 0 0 0>;
+};
+
+msi3: msi@41c00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41c00 0x200 0x47148 4>;
+	interrupts = <
+		0xf8 0 0 0
+		0xf9 0 0 0
+		0xfa 0 0 0
+		0xfb 0 0 0
+		0xfc 0 0 0
+		0xfd 0 0 0
+		0xfe 0 0 0
+		0xff 0 0 0
+		0x118 0 0 0
+		0x119 0 0 0
+		0x11a 0 0 0
+		0x11b 0 0 0
+		0x11c 0 0 0
+		0x11d 0 0 0
+		0x11e 0 0 0
+		0x11f 0 0 0>;
+};
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};

arch/powerpc/boot/dts/fsl/t4240si-post.dtsi

@@ -358,7 +358,7 @@
 			16 2 1 30>;
 	};
 
-/include/ "qoriq-mpic.dtsi"
+/include/ "qoriq-mpic4.3.dtsi"
 
 	guts: global-utilities@e0000 {
 		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";

arch/powerpc/boot/dts/p1020rdb-pd.dts

@@ -0,0 +1,280 @@
+/*
+ * P1020 RDB-PD Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PD";
+	compatible = "fsl,P1020RDB-PD";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR, NAND flash, L2 switch and CPLD */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffa00000 0x00020000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 128KB for DTB Image */
+				reg = <0x0 0x00020000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@20000 {
+				/* 3.875 MB for Linux Kernel Image */
+				reg = <0x00020000 0x003e0000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@400000 {
+				/* 58MB for Root file System */
+				reg = <0x00400000 0x03a00000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3e00000 {
+				/* This location must not be altered  */
+				/* 1M for Vitesse 7385 Switch firmware */
+				reg = <0x3e00000 0x00100000>;
+				label = "NOR Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@600000 {
+				/* 122MB for File System Image */
+				reg = <0x00600000 0x07a00000>;
+				label = "NAND File System Image";
+			};
+		};
+
+		cpld@2,0 {
+			compatible = "fsl,p1020rdb-pd-cpld";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+		L2switch@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x3 0x0 0x20000>;
+		};
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801";
+				reg = <0>;
+				/* input clock */
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image*/
+					reg = <0x00080000 0x00080000>;
+					label = "SPI DTB Image";
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI Linux Kernel Image";
+				};
+
+				partition@500000 {
+					/* 11MB for FS System Image */
+					reg = <0x00500000 0x00b00000>;
+					label = "SPI File System Image";
+				};
+			};
+
+			slic@0 {
+				compatible = "zarlink,le88266";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			slic@1 {
+				compatible = "zarlink,le88266";
+				reg = <2>;
+				spi-max-frequency = <8000000>;
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26000 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@b0000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@b1000 {
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/configs/85xx/p1023rds_defconfig

@@ -63,6 +63,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/powerpc/configs/corenet32_smp_defconfig

@@ -70,6 +70,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y

arch/powerpc/configs/corenet64_smp_defconfig

@@ -59,6 +59,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y

arch/powerpc/configs/mpc83xx_defconfig

@@ -42,6 +42,7 @@ CONFIG_INET_ESP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 CONFIG_MTD_CHAR=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -78,6 +78,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -81,6 +81,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y

arch/powerpc/include/asm/epapr_hcalls.h

@@ -105,6 +105,12 @@
 extern bool epapr_paravirt_enabled;
 extern u32 epapr_hypercall_start[];
 
+#ifdef CONFIG_EPAPR_PARAVIRT
+int __init epapr_paravirt_early_init(void);
+#else
+static inline int epapr_paravirt_early_init(void) { return 0; }
+#endif
+
 /*
  * We use "uintptr_t" to define a register because it's guaranteed to be a
  * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit

arch/powerpc/include/asm/mpic.h

@@ -396,7 +396,14 @@ extern struct bus_type mpic_subsys;
 #define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
 
 /* Get the version of primary MPIC */
+#ifdef CONFIG_MPIC
 extern u32 fsl_mpic_primary_get_version(void);
+#else
+static inline u32 fsl_mpic_primary_get_version(void)
+{
+	return 0;
+}
+#endif
 
 /* Allocate the controller structure and setup the linux irq descs
  * for the range if interrupts passed in. No HW initialization is

arch/powerpc/include/asm/perf_event_fsl_emb.h

@@ -13,7 +13,7 @@
 #include <linux/types.h>
 #include <asm/hw_irq.h>
 
-#define MAX_HWEVENTS 4
+#define MAX_HWEVENTS 6
 
 /* event flags */
 #define FSL_EMB_EVENT_VALID      1

arch/powerpc/include/asm/ppc-opcode.h

@@ -81,6 +81,53 @@
 #define	__REGA0_R30	30
 #define	__REGA0_R31	31
 
+/* opcode and xopcode for instructions */
+#define OP_TRAP 3
+#define OP_TRAP_64 2
+
+#define OP_31_XOP_TRAP      4
+#define OP_31_XOP_LWZX      23
+#define OP_31_XOP_DCBST     54
+#define OP_31_XOP_LWZUX     55
+#define OP_31_XOP_TRAP_64   68
+#define OP_31_XOP_DCBF      86
+#define OP_31_XOP_LBZX      87
+#define OP_31_XOP_STWX      151
+#define OP_31_XOP_STBX      215
+#define OP_31_XOP_LBZUX     119
+#define OP_31_XOP_STBUX     247
+#define OP_31_XOP_LHZX      279
+#define OP_31_XOP_LHZUX     311
+#define OP_31_XOP_MFSPR     339
+#define OP_31_XOP_LHAX      343
+#define OP_31_XOP_LHAUX     375
+#define OP_31_XOP_STHX      407
+#define OP_31_XOP_STHUX     439
+#define OP_31_XOP_MTSPR     467
+#define OP_31_XOP_DCBI      470
+#define OP_31_XOP_LWBRX     534
+#define OP_31_XOP_TLBSYNC   566
+#define OP_31_XOP_STWBRX    662
+#define OP_31_XOP_LHBRX     790
+#define OP_31_XOP_STHBRX    918
+
+#define OP_LWZ  32
+#define OP_LD   58
+#define OP_LWZU 33
+#define OP_LBZ  34
+#define OP_LBZU 35
+#define OP_STW  36
+#define OP_STWU 37
+#define OP_STD  62
+#define OP_STB  38
+#define OP_STBU 39
+#define OP_LHZ  40
+#define OP_LHZU 41
+#define OP_LHA  42
+#define OP_LHAU 43
+#define OP_STH  44
+#define OP_STHU 45
+
 /* sorted alphabetically */
 #define PPC_INST_BHRBE			0x7c00025c
 #define PPC_INST_CLRBHRB		0x7c00035c

arch/powerpc/include/asm/reg_fsl_emb.h

@@ -17,12 +17,16 @@
 /* Freescale Book E Performance Monitor APU Registers */
 #define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
 #define PMRN_PMC1	0x011	/* Performance Monitor Counter 1 */
-#define PMRN_PMC2	0x012	/* Performance Monitor Counter 1 */
-#define PMRN_PMC3	0x013	/* Performance Monitor Counter 1 */
+#define PMRN_PMC2	0x012	/* Performance Monitor Counter 2 */
+#define PMRN_PMC3	0x013	/* Performance Monitor Counter 3 */
+#define PMRN_PMC4	0x014	/* Performance Monitor Counter 4 */
+#define PMRN_PMC5	0x015	/* Performance Monitor Counter 5 */
 #define PMRN_PMLCA0	0x090	/* PM Local Control A0 */
 #define PMRN_PMLCA1	0x091	/* PM Local Control A1 */
 #define PMRN_PMLCA2	0x092	/* PM Local Control A2 */
 #define PMRN_PMLCA3	0x093	/* PM Local Control A3 */
+#define PMRN_PMLCA4	0x094	/* PM Local Control A4 */
+#define PMRN_PMLCA5	0x095	/* PM Local Control A5 */
 
 #define PMLCA_FC	0x80000000	/* Freeze Counter */
 #define PMLCA_FCS	0x40000000	/* Freeze in Supervisor */
@@ -30,14 +34,18 @@
 #define PMLCA_FCM1	0x10000000	/* Freeze when PMM==1 */
 #define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
 #define PMLCA_CE	0x04000000	/* Condition Enable */
+#define PMLCA_FGCS1	0x00000002	/* Freeze in guest state */
+#define PMLCA_FGCS0	0x00000001	/* Freeze in hypervisor state */
 
-#define PMLCA_EVENT_MASK 0x00ff0000	/* Event field */
+#define PMLCA_EVENT_MASK 0x01ff0000	/* Event field */
 #define PMLCA_EVENT_SHIFT	16
 
 #define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
 #define PMRN_PMLCB1	0x111	/* PM Local Control B1 */
 #define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
 #define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
+#define PMRN_PMLCB4	0x114	/* PM Local Control B4 */
+#define PMRN_PMLCB5	0x115	/* PM Local Control B5 */
 
 #define PMLCB_THRESHMUL_MASK	0x0700	/* Threshold Multiple Field */
 #define PMLCB_THRESHMUL_SHIFT	8
@@ -55,16 +63,22 @@
 
 #define PMRN_UPMC0	0x000	/* User Performance Monitor Counter 0 */
 #define PMRN_UPMC1	0x001	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 2 */
+#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 3 */
+#define PMRN_UPMC4	0x004	/* User Performance Monitor Counter 4 */
+#define PMRN_UPMC5	0x005	/* User Performance Monitor Counter 5 */
 #define PMRN_UPMLCA0	0x080	/* User PM Local Control A0 */
 #define PMRN_UPMLCA1	0x081	/* User PM Local Control A1 */
 #define PMRN_UPMLCA2	0x082	/* User PM Local Control A2 */
 #define PMRN_UPMLCA3	0x083	/* User PM Local Control A3 */
+#define PMRN_UPMLCA4	0x084	/* User PM Local Control A4 */
+#define PMRN_UPMLCA5	0x085	/* User PM Local Control A5 */
 #define PMRN_UPMLCB0	0x100	/* User PM Local Control B0 */
 #define PMRN_UPMLCB1	0x101	/* User PM Local Control B1 */
 #define PMRN_UPMLCB2	0x102	/* User PM Local Control B2 */
 #define PMRN_UPMLCB3	0x103	/* User PM Local Control B3 */
+#define PMRN_UPMLCB4	0x104	/* User PM Local Control B4 */
+#define PMRN_UPMLCB5	0x105	/* User PM Local Control B5 */
 #define PMRN_UPMGC0	0x180	/* User PM Global Control 0 */
 
 

arch/powerpc/kernel/cpu_setup_fsl_booke.S

@@ -75,7 +75,7 @@ _GLOBAL(__setup_cpu_e500v2)
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
 	bl	__setup_e500_ivors
-#ifdef CONFIG_FSL_RIO
+#if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI)
 	/* Ensure that RFXE is set */
 	mfspr	r3,SPRN_HID1
 	oris	r3,r3,HID1_RFXE@h

arch/powerpc/kernel/cputable.c

@@ -2105,7 +2105,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 			MMU_FTR_USE_TLBILX,
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
-		.num_pmcs		= 4,
+		.num_pmcs		= 6,
 		.oprofile_cpu_type	= "ppc/e6500",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e6500,

arch/powerpc/kernel/epapr_paravirt.c

@@ -30,22 +30,20 @@ extern u32 epapr_ev_idle_start[];
 
 bool epapr_paravirt_enabled;
 
-static int __init epapr_paravirt_init(void)
+static int __init early_init_dt_scan_epapr(unsigned long node,
+					   const char *uname,
+					   int depth, void *data)
 {
-	struct device_node *hyper_node;
 	const u32 *insts;
-	int len, i;
+	unsigned long len;
+	int i;
 
-	hyper_node = of_find_node_by_path("/hypervisor");
-	if (!hyper_node)
-		return -ENODEV;
-
-	insts = of_get_property(hyper_node, "hcall-instructions", &len);
+	insts = of_get_flat_dt_prop(node, "hcall-instructions", &len);
 	if (!insts)
-		return -ENODEV;
+		return 0;
 
 	if (len % 4 || len > (4 * 4))
-		return -ENODEV;
+		return -1;
 
 	for (i = 0; i < (len / 4); i++) {
 		patch_instruction(epapr_hypercall_start + i, insts[i]);
@@ -55,13 +53,19 @@ static int __init epapr_paravirt_init(void)
 	}
 
 #if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
-	if (of_get_property(hyper_node, "has-idle", NULL))
+	if (of_get_flat_dt_prop(node, "has-idle", NULL))
 		ppc_md.power_save = epapr_ev_idle;
 #endif
 
 	epapr_paravirt_enabled = true;
 
+	return 1;
+}
+
+int __init epapr_paravirt_early_init(void)
+{
+	of_scan_flat_dt(early_init_dt_scan_epapr, NULL);
+
 	return 0;
 }
 
-early_initcall(epapr_paravirt_init);

arch/powerpc/kernel/setup_32.c

@@ -38,6 +38,7 @@
 #include <asm/serial.h>
 #include <asm/udbg.h>
 #include <asm/mmu_context.h>
+#include <asm/epapr_hcalls.h>
 
 #include "setup.h"
 
@@ -128,6 +129,8 @@ notrace void __init machine_init(u64 dt_ptr)
 	/* Do some early initialization based on the flat device tree */
 	early_init_devtree(__va(dt_ptr));
 
+	epapr_paravirt_early_init();
+
 	early_init_mmu();
 
 	probe_machine();
@@ -326,5 +329,4 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Initialize the MMU context management stuff */
 	mmu_context_init();
-
 }

arch/powerpc/kernel/setup_64.c

@@ -66,6 +66,7 @@
 #include <asm/code-patching.h>
 #include <asm/kvm_ppc.h>
 #include <asm/hugetlb.h>
+#include <asm/epapr_hcalls.h>
 
 #include "setup.h"
 
@@ -215,6 +216,8 @@ void __init early_setup(unsigned long dt_ptr)
 	 */
 	early_init_devtree(__va(dt_ptr));
 
+	epapr_paravirt_early_init();
+
 	/* Now we know the logical id of our boot cpu, setup the paca. */
 	setup_paca(&paca[boot_cpuid]);
 	fixup_boot_paca();

arch/powerpc/kernel/swsusp_booke.S

@@ -141,6 +141,14 @@ _GLOBAL(swsusp_arch_resume)
 	lis	r11,swsusp_save_area@h
 	ori	r11,r11,swsusp_save_area@l
 
+	/*
+	 * Mappings from virtual addresses to physical addresses may be
+	 * different than they were prior to restoring hibernation state. 
+	 * Invalidate the TLB so that the boot CPU is using the new
+	 * mappings.
+	 */
+	bl	_tlbil_all
+
 	lwz	r4,SL_SPRG0(r11)
 	mtsprg	0,r4
 	lwz	r4,SL_SPRG1(r11)

arch/powerpc/kernel/traps.c

@@ -62,6 +62,7 @@
 #include <asm/switch_to.h>
 #include <asm/tm.h>
 #include <asm/debug.h>
+#include <sysdev/fsl_pci.h>
 
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
 int (*__debugger)(struct pt_regs *regs) __read_mostly;
@@ -567,6 +568,8 @@ int machine_check_e500(struct pt_regs *regs)
 	if (reason & MCSR_BUS_RBERR) {
 		if (fsl_rio_mcheck_exception(regs))
 			return 1;
+		if (fsl_pci_mcheck_exception(regs))
+			return 1;
 	}
 
 	printk("Machine check in kernel mode.\n");

arch/powerpc/kvm/emulate.c

@@ -30,53 +30,10 @@
 #include <asm/byteorder.h>
 #include <asm/kvm_ppc.h>
 #include <asm/disassemble.h>
+#include <asm/ppc-opcode.h>
 #include "timing.h"
 #include "trace.h"
 
-#define OP_TRAP 3
-#define OP_TRAP_64 2
-
-#define OP_31_XOP_TRAP      4
-#define OP_31_XOP_LWZX      23
-#define OP_31_XOP_DCBST     54
-#define OP_31_XOP_TRAP_64   68
-#define OP_31_XOP_DCBF      86
-#define OP_31_XOP_LBZX      87
-#define OP_31_XOP_STWX      151
-#define OP_31_XOP_STBX      215
-#define OP_31_XOP_LBZUX     119
-#define OP_31_XOP_STBUX     247
-#define OP_31_XOP_LHZX      279
-#define OP_31_XOP_LHZUX     311
-#define OP_31_XOP_MFSPR     339
-#define OP_31_XOP_LHAX      343
-#define OP_31_XOP_STHX      407
-#define OP_31_XOP_STHUX     439
-#define OP_31_XOP_MTSPR     467
-#define OP_31_XOP_DCBI      470
-#define OP_31_XOP_LWBRX     534
-#define OP_31_XOP_TLBSYNC   566
-#define OP_31_XOP_STWBRX    662
-#define OP_31_XOP_LHBRX     790
-#define OP_31_XOP_STHBRX    918
-
-#define OP_LWZ  32
-#define OP_LD   58
-#define OP_LWZU 33
-#define OP_LBZ  34
-#define OP_LBZU 35
-#define OP_STW  36
-#define OP_STWU 37
-#define OP_STD  62
-#define OP_STB  38
-#define OP_STBU 39
-#define OP_LHZ  40
-#define OP_LHZU 41
-#define OP_LHA  42
-#define OP_LHAU 43
-#define OP_STH  44
-#define OP_STHU 45
-
 void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
 {
 	unsigned long dec_nsec;

arch/powerpc/oprofile/op_model_fsl_emb.c

@@ -46,6 +46,12 @@ static inline u32 get_pmlca(int ctr)
 		case 3:
 			pmlca = mfpmr(PMRN_PMLCA3);
 			break;
+		case 4:
+			pmlca = mfpmr(PMRN_PMLCA4);
+			break;
+		case 5:
+			pmlca = mfpmr(PMRN_PMLCA5);
+			break;
 		default:
 			panic("Bad ctr number\n");
 	}
@@ -68,6 +74,12 @@ static inline void set_pmlca(int ctr, u32 pmlca)
 		case 3:
 			mtpmr(PMRN_PMLCA3, pmlca);
 			break;
+		case 4:
+			mtpmr(PMRN_PMLCA4, pmlca);
+			break;
+		case 5:
+			mtpmr(PMRN_PMLCA5, pmlca);
+			break;
 		default:
 			panic("Bad ctr number\n");
 	}
@@ -84,6 +96,10 @@ static inline unsigned int ctr_read(unsigned int i)
 			return mfpmr(PMRN_PMC2);
 		case 3:
 			return mfpmr(PMRN_PMC3);
+		case 4:
+			return mfpmr(PMRN_PMC4);
+		case 5:
+			return mfpmr(PMRN_PMC5);
 		default:
 			return 0;
 	}
@@ -104,6 +120,12 @@ static inline void ctr_write(unsigned int i, unsigned int val)
 		case 3:
 			mtpmr(PMRN_PMC3, val);
 			break;
+		case 4:
+			mtpmr(PMRN_PMC4, val);
+			break;
+		case 5:
+			mtpmr(PMRN_PMC5, val);
+			break;
 		default:
 			break;
 	}
@@ -133,6 +155,14 @@ static void init_pmc_stop(int ctr)
 			mtpmr(PMRN_PMLCA3, pmlca);
 			mtpmr(PMRN_PMLCB3, pmlcb);
 			break;
+		case 4:
+			mtpmr(PMRN_PMLCA4, pmlca);
+			mtpmr(PMRN_PMLCB4, pmlcb);
+			break;
+		case 5:
+			mtpmr(PMRN_PMLCA5, pmlca);
+			mtpmr(PMRN_PMLCB5, pmlcb);
+			break;
 		default:
 			panic("Bad ctr number!\n");
 	}

arch/powerpc/perf/Makefile

@@ -9,7 +9,7 @@ obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
 obj-$(CONFIG_FSL_EMB_PERF_EVENT) += core-fsl-emb.o
-obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o
+obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o e6500-pmu.o
 
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 obj-$(CONFIG_PPC32)		+= $(obj32-y)

arch/powerpc/perf/core-fsl-emb.c

@@ -70,6 +70,12 @@ static unsigned long read_pmc(int idx)
 	case 3:
 		val = mfpmr(PMRN_PMC3);
 		break;
+	case 4:
+		val = mfpmr(PMRN_PMC4);
+		break;
+	case 5:
+		val = mfpmr(PMRN_PMC5);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
 		val = 0;
@@ -95,6 +101,12 @@ static void write_pmc(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMC3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMC4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMC5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
 	}
@@ -120,6 +132,12 @@ static void write_pmlca(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMLCA3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMLCA4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMLCA5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
 	}
@@ -145,6 +163,12 @@ static void write_pmlcb(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMLCB3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMLCB4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMLCB5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
 	}
@@ -462,6 +486,12 @@ static int fsl_emb_pmu_event_init(struct perf_event *event)
 	int num_restricted;
 	int i;
 
+	if (ppmu->n_counter > MAX_HWEVENTS) {
+		WARN(1, "No. of perf counters (%d) is higher than max array size(%d)\n",
+			ppmu->n_counter, MAX_HWEVENTS);
+		ppmu->n_counter = MAX_HWEVENTS;
+	}
+
 	switch (event->attr.type) {
 	case PERF_TYPE_HARDWARE:
 		ev = event->attr.config;

arch/powerpc/perf/e6500-pmu.c

@@ -0,0 +1,121 @@
+/*
+ * Performance counter support for e6500 family processors.
+ *
+ * Author: Priyanka Jain, Priyanka.Jain@freescale.com
+ * Based on e500-pmu.c
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+/*
+ * Map of generic hardware event types to hardware events
+ * Zero if unsupported
+ */
+static int e6500_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = 1,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_MISSES] = 221,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
+	[PERF_COUNT_HW_BRANCH_MISSES] = 15,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int e6500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	27,		222	},
+		[C(OP_WRITE)] = {	28,		223	},
+		[C(OP_PREFETCH)] = {	29,		0	},
+	},
+	[C(L1I)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	2,		254	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	37,		0	},
+	},
+	/*
+	 * Assuming LL means L2, it's not a good match for this model.
+	 * It does not have separate read/write events (but it does have
+	 * separate instruction/data events).
+	 */
+	[C(LL)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * There are data/instruction MMU misses, but that's a miss on
+	 * the chip's internal level-one TLB which is probably not
+	 * what the user wants.  Instead, unified level-two TLB misses
+	 * are reported here.
+	 */
+	[C(DTLB)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	26,		66	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	12,		15	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(NODE)] = {
+				/* RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	-1,		-1	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+static int num_events = 512;
+
+/* Upper half of event id is PMLCb, for threshold events */
+static u64 e6500_xlate_event(u64 event_id)
+{
+	u32 event_low = (u32)event_id;
+	if (event_low >= num_events ||
+		(event_id & (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)))
+		return 0;
+
+	return FSL_EMB_EVENT_VALID;
+}
+
+static struct fsl_emb_pmu e6500_pmu = {
+	.name			= "e6500 family",
+	.n_counter		= 6,
+	.n_restricted		= 0,
+	.xlate_event		= e6500_xlate_event,
+	.n_generic		= ARRAY_SIZE(e6500_generic_events),
+	.generic_events		= e6500_generic_events,
+	.cache_events		= &e6500_cache_events,
+};
+
+static int init_e6500_pmu(void)
+{
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+		strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e6500"))
+		return -ENODEV;
+
+	return register_fsl_emb_pmu(&e6500_pmu);
+}
+
+early_initcall(init_e6500_pmu);

arch/powerpc/platforms/85xx/corenet_ds.c

@@ -53,12 +53,6 @@ void __init corenet_ds_setup_arch(void)
 {
 	mpc85xx_smp_init();
 
-#if defined(CONFIG_PCI) && defined(CONFIG_PPC64)
-	pci_devs_phb_init();
-#endif
-
-	fsl_pci_assign_primary();
-
 	swiotlb_detect_4g();
 
 	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

@@ -160,6 +160,7 @@ machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb_pd, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
@@ -193,6 +194,13 @@ static int __init p1020_rdb_pc_probe(void)
 	return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
 }
 
+static int __init p1020_rdb_pd_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PD");
+}
+
 static int __init p1021_rdb_pc_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
@@ -351,6 +359,20 @@ define_machine(p1020_rdb_pc) {
 	.progress		= udbg_progress,
 };
 
+define_machine(p1020_rdb_pd) {
+	.name			= "P1020RDB-PD",
+	.probe			= p1020_rdb_pd_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
 define_machine(p1024_rdb) {
 	.name			= "P1024 RDB",
 	.probe			= p1024_rdb_probe,

arch/powerpc/sysdev/fsl_msi.c

@@ -28,6 +28,18 @@
 #include "fsl_msi.h"
 #include "fsl_pci.h"
 
+#define MSIIR_OFFSET_MASK	0xfffff
+#define MSIIR_IBS_SHIFT		0
+#define MSIIR_SRS_SHIFT		5
+#define MSIIR1_IBS_SHIFT	4
+#define MSIIR1_SRS_SHIFT	0
+#define MSI_SRS_MASK		0xf
+#define MSI_IBS_MASK		0x1f
+
+#define msi_hwirq(msi, msir_index, intr_index) \
+		((msir_index) << (msi)->srs_shift | \
+		 ((intr_index) << (msi)->ibs_shift))
+
 static LIST_HEAD(msi_head);
 
 struct fsl_msi_feature {
@@ -80,18 +92,19 @@ static const struct irq_domain_ops fsl_msi_host_ops = {
 
 static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
 {
-	int rc;
+	int rc, hwirq;
 
-	rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS,
+	rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS_MAX,
 			      msi_data->irqhost->of_node);
 	if (rc)
 		return rc;
 
-	rc = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap);
-	if (rc < 0) {
-		msi_bitmap_free(&msi_data->bitmap);
-		return rc;
-	}
+	/*
+	 * Reserve all the hwirqs
+	 * The available hwirqs will be released in fsl_msi_setup_hwirq()
+	 */
+	for (hwirq = 0; hwirq < NR_MSI_IRQS_MAX; hwirq++)
+		msi_bitmap_reserve_hwirq(&msi_data->bitmap, hwirq);
 
 	return 0;
 }
@@ -144,8 +157,9 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
 
 	msg->data = hwirq;
 
-	pr_debug("%s: allocated srs: %d, ibs: %d\n",
-		__func__, hwirq / IRQS_PER_MSI_REG, hwirq % IRQS_PER_MSI_REG);
+	pr_debug("%s: allocated srs: %d, ibs: %d\n", __func__,
+		 (hwirq >> msi_data->srs_shift) & MSI_SRS_MASK,
+		 (hwirq >> msi_data->ibs_shift) & MSI_IBS_MASK);
 }
 
 static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
@@ -255,7 +269,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 
 	msir_index = cascade_data->index;
 
-	if (msir_index >= NR_MSI_REG)
+	if (msir_index >= NR_MSI_REG_MAX)
 		cascade_irq = NO_IRQ;
 
 	irqd_set_chained_irq_inprogress(idata);
@@ -285,8 +299,8 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		intr_index = ffs(msir_value) - 1;
 
 		cascade_irq = irq_linear_revmap(msi_data->irqhost,
-				msir_index * IRQS_PER_MSI_REG +
-					intr_index + have_shift);
+				msi_hwirq(msi_data, msir_index,
+					  intr_index + have_shift));
 		if (cascade_irq != NO_IRQ)
 			generic_handle_irq(cascade_irq);
 		have_shift += intr_index + 1;
@@ -316,7 +330,7 @@ static int fsl_of_msi_remove(struct platform_device *ofdev)
 
 	if (msi->list.prev != NULL)
 		list_del(&msi->list);
-	for (i = 0; i < NR_MSI_REG; i++) {
+	for (i = 0; i < NR_MSI_REG_MAX; i++) {
 		virq = msi->msi_virqs[i];
 		if (virq != NO_IRQ) {
 			cascade_data = irq_get_handler_data(virq);
@@ -339,7 +353,7 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
 			       int offset, int irq_index)
 {
 	struct fsl_msi_cascade_data *cascade_data = NULL;
-	int virt_msir;
+	int virt_msir, i;
 
 	virt_msir = irq_of_parse_and_map(dev->dev.of_node, irq_index);
 	if (virt_msir == NO_IRQ) {
@@ -360,6 +374,11 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
 	irq_set_handler_data(virt_msir, cascade_data);
 	irq_set_chained_handler(virt_msir, fsl_msi_cascade);
 
+	/* Release the hwirqs corresponding to this MSI register */
+	for (i = 0; i < IRQS_PER_MSI_REG; i++)
+		msi_bitmap_free_hwirqs(&msi->bitmap,
+				       msi_hwirq(msi, offset, i), 1);
+
 	return 0;
 }
 
@@ -368,14 +387,12 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 {
 	const struct of_device_id *match;
 	struct fsl_msi *msi;
-	struct resource res;
+	struct resource res, msiir;
 	int err, i, j, irq_index, count;
-	int rc;
 	const u32 *p;
 	const struct fsl_msi_feature *features;
 	int len;
 	u32 offset;
-	static const u32 all_avail[] = { 0, NR_MSI_IRQS };
 
 	match = of_match_device(fsl_of_msi_ids, &dev->dev);
 	if (!match)
@@ -392,7 +409,7 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, msi);
 
 	msi->irqhost = irq_domain_add_linear(dev->dev.of_node,
-				      NR_MSI_IRQS, &fsl_msi_host_ops, msi);
+				      NR_MSI_IRQS_MAX, &fsl_msi_host_ops, msi);
 
 	if (msi->irqhost == NULL) {
 		dev_err(&dev->dev, "No memory for MSI irqhost\n");
@@ -421,6 +438,16 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 		}
 		msi->msiir_offset =
 			features->msiir_offset + (res.start & 0xfffff);
+
+		/*
+		 * First read the MSIIR/MSIIR1 offset from dts
+		 * On failure use the hardcode MSIIR offset
+		 */
+		if (of_address_to_resource(dev->dev.of_node, 1, &msiir))
+			msi->msiir_offset = features->msiir_offset +
+					    (res.start & MSIIR_OFFSET_MASK);
+		else
+			msi->msiir_offset = msiir.start & MSIIR_OFFSET_MASK;
 	}
 
 	msi->feature = features->fsl_pic_ip;
@@ -431,42 +458,66 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 	 */
 	msi->phandle = dev->dev.of_node->phandle;
 
-	rc = fsl_msi_init_allocator(msi);
-	if (rc) {
+	err = fsl_msi_init_allocator(msi);
+	if (err) {
 		dev_err(&dev->dev, "Error allocating MSI bitmap\n");
 		goto error_out;
 	}
 
 	p = of_get_property(dev->dev.of_node, "msi-available-ranges", &len);
-	if (p && len % (2 * sizeof(u32)) != 0) {
-		dev_err(&dev->dev, "%s: Malformed msi-available-ranges property\n",
-			__func__);
-		err = -EINVAL;
-		goto error_out;
-	}
 
-	if (!p) {
-		p = all_avail;
-		len = sizeof(all_avail);
-	}
+	if (of_device_is_compatible(dev->dev.of_node, "fsl,mpic-msi-v4.3")) {
+		msi->srs_shift = MSIIR1_SRS_SHIFT;
+		msi->ibs_shift = MSIIR1_IBS_SHIFT;
+		if (p)
+			dev_warn(&dev->dev, "%s: dose not support msi-available-ranges property\n",
+				__func__);
+
+		for (irq_index = 0; irq_index < NR_MSI_REG_MSIIR1;
+		     irq_index++) {
+			err = fsl_msi_setup_hwirq(msi, dev,
+						  irq_index, irq_index);
+			if (err)
+				goto error_out;
+		}
+	} else {
+		static const u32 all_avail[] =
+			{ 0, NR_MSI_REG_MSIIR * IRQS_PER_MSI_REG };
 
-	for (irq_index = 0, i = 0; i < len / (2 * sizeof(u32)); i++) {
-		if (p[i * 2] % IRQS_PER_MSI_REG ||
-		    p[i * 2 + 1] % IRQS_PER_MSI_REG) {
-			printk(KERN_WARNING "%s: %s: msi available range of %u at %u is not IRQ-aligned\n",
-			       __func__, dev->dev.of_node->full_name,
-			       p[i * 2 + 1], p[i * 2]);
+		msi->srs_shift = MSIIR_SRS_SHIFT;
+		msi->ibs_shift = MSIIR_IBS_SHIFT;
+
+		if (p && len % (2 * sizeof(u32)) != 0) {
+			dev_err(&dev->dev, "%s: Malformed msi-available-ranges property\n",
+				__func__);
 			err = -EINVAL;
 			goto error_out;
 		}
 
-		offset = p[i * 2] / IRQS_PER_MSI_REG;
-		count = p[i * 2 + 1] / IRQS_PER_MSI_REG;
+		if (!p) {
+			p = all_avail;
+			len = sizeof(all_avail);
+		}
 
-		for (j = 0; j < count; j++, irq_index++) {
-			err = fsl_msi_setup_hwirq(msi, dev, offset + j, irq_index);
-			if (err)
+		for (irq_index = 0, i = 0; i < len / (2 * sizeof(u32)); i++) {
+			if (p[i * 2] % IRQS_PER_MSI_REG ||
+			    p[i * 2 + 1] % IRQS_PER_MSI_REG) {
+				pr_warn("%s: %s: msi available range of %u at %u is not IRQ-aligned\n",
+				       __func__, dev->dev.of_node->full_name,
+				       p[i * 2 + 1], p[i * 2]);
+				err = -EINVAL;
 				goto error_out;
+			}
+
+			offset = p[i * 2] / IRQS_PER_MSI_REG;
+			count = p[i * 2 + 1] / IRQS_PER_MSI_REG;
+
+			for (j = 0; j < count; j++, irq_index++) {
+				err = fsl_msi_setup_hwirq(msi, dev, offset + j,
+							  irq_index);
+				if (err)
+					goto error_out;
+			}
 		}
 	}
 
@@ -508,6 +559,10 @@ static const struct of_device_id fsl_of_msi_ids[] = {
 		.compatible = "fsl,mpic-msi",
 		.data = &mpic_msi_feature,
 	},
+	{
+		.compatible = "fsl,mpic-msi-v4.3",
+		.data = &mpic_msi_feature,
+	},
 	{
 		.compatible = "fsl,ipic-msi",
 		.data = &ipic_msi_feature,

arch/powerpc/sysdev/fsl_msi.h

@@ -16,9 +16,11 @@
 #include <linux/of.h>
 #include <asm/msi_bitmap.h>
 
-#define NR_MSI_REG		8
+#define NR_MSI_REG_MSIIR	8  /* MSIIR can index 8 MSI registers */
+#define NR_MSI_REG_MSIIR1	16 /* MSIIR1 can index 16 MSI registers */
+#define NR_MSI_REG_MAX		NR_MSI_REG_MSIIR1
 #define IRQS_PER_MSI_REG	32
-#define NR_MSI_IRQS	(NR_MSI_REG * IRQS_PER_MSI_REG)
+#define NR_MSI_IRQS_MAX	(NR_MSI_REG_MAX * IRQS_PER_MSI_REG)
 
 #define FSL_PIC_IP_MASK   0x0000000F
 #define FSL_PIC_IP_MPIC   0x00000001
@@ -31,9 +33,11 @@ struct fsl_msi {
 	unsigned long cascade_irq;
 
 	u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */
+	u32 ibs_shift; /* Shift of interrupt bit select */
+	u32 srs_shift; /* Shift of the shared interrupt register select */
 	void __iomem *msi_regs;
 	u32 feature;
-	int msi_virqs[NR_MSI_REG];
+	int msi_virqs[NR_MSI_REG_MAX];
 
 	struct msi_bitmap bitmap;
 

arch/powerpc/sysdev/fsl_pci.c

@@ -26,11 +26,15 @@
 #include <linux/memblock.h>
 #include <linux/log2.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
 #include <asm/machdep.h>
+#include <asm/disassemble.h>
+#include <asm/ppc-opcode.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -64,7 +68,7 @@ static int fsl_pcie_check_link(struct pci_controller *hose)
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
 		if (hose->ops->read == fsl_indirect_read_config) {
 			struct pci_bus bus;
-			bus.number = 0;
+			bus.number = hose->first_busno;
 			bus.sysdata = hose;
 			bus.ops = hose->ops;
 			indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val);
@@ -297,10 +301,10 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		/* Size window to exact size if power-of-two or one size up */
 		if ((1ull << mem_log) != mem) {
+			mem_log++;
 			if ((1ull << mem_log) > mem)
 				pr_info("%s: Setting PCI inbound window "
 					"greater than memory size\n", name);
-			mem_log++;
 		}
 
 		piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);
@@ -373,7 +377,9 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	}
 
 	if (hose->dma_window_size < mem) {
-#ifndef CONFIG_SWIOTLB
+#ifdef CONFIG_SWIOTLB
+		ppc_swiotlb_enable = 1;
+#else
 		pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to "
 			"map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
 			 name);
@@ -868,6 +874,160 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose)
 	return 0;
 }
 
+#ifdef CONFIG_E500
+static int mcheck_handle_load(struct pt_regs *regs, u32 inst)
+{
+	unsigned int rd, ra, rb, d;
+
+	rd = get_rt(inst);
+	ra = get_ra(inst);
+	rb = get_rb(inst);
+	d = get_d(inst);
+
+	switch (get_op(inst)) {
+	case 31:
+		switch (get_xop(inst)) {
+		case OP_31_XOP_LWZX:
+		case OP_31_XOP_LWBRX:
+			regs->gpr[rd] = 0xffffffff;
+			break;
+
+		case OP_31_XOP_LWZUX:
+			regs->gpr[rd] = 0xffffffff;
+			regs->gpr[ra] += regs->gpr[rb];
+			break;
+
+		case OP_31_XOP_LBZX:
+			regs->gpr[rd] = 0xff;
+			break;
+
+		case OP_31_XOP_LBZUX:
+			regs->gpr[rd] = 0xff;
+			regs->gpr[ra] += regs->gpr[rb];
+			break;
+
+		case OP_31_XOP_LHZX:
+		case OP_31_XOP_LHBRX:
+			regs->gpr[rd] = 0xffff;
+			break;
+
+		case OP_31_XOP_LHZUX:
+			regs->gpr[rd] = 0xffff;
+			regs->gpr[ra] += regs->gpr[rb];
+			break;
+
+		case OP_31_XOP_LHAX:
+			regs->gpr[rd] = ~0UL;
+			break;
+
+		case OP_31_XOP_LHAUX:
+			regs->gpr[rd] = ~0UL;
+			regs->gpr[ra] += regs->gpr[rb];
+			break;
+
+		default:
+			return 0;
+		}
+		break;
+
+	case OP_LWZ:
+		regs->gpr[rd] = 0xffffffff;
+		break;
+
+	case OP_LWZU:
+		regs->gpr[rd] = 0xffffffff;
+		regs->gpr[ra] += (s16)d;
+		break;
+
+	case OP_LBZ:
+		regs->gpr[rd] = 0xff;
+		break;
+
+	case OP_LBZU:
+		regs->gpr[rd] = 0xff;
+		regs->gpr[ra] += (s16)d;
+		break;
+
+	case OP_LHZ:
+		regs->gpr[rd] = 0xffff;
+		break;
+
+	case OP_LHZU:
+		regs->gpr[rd] = 0xffff;
+		regs->gpr[ra] += (s16)d;
+		break;
+
+	case OP_LHA:
+		regs->gpr[rd] = ~0UL;
+		break;
+
+	case OP_LHAU:
+		regs->gpr[rd] = ~0UL;
+		regs->gpr[ra] += (s16)d;
+		break;
+
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+static int is_in_pci_mem_space(phys_addr_t addr)
+{
+	struct pci_controller *hose;
+	struct resource *res;
+	int i;
+
+	list_for_each_entry(hose, &hose_list, list_node) {
+		if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG))
+			continue;
+
+		for (i = 0; i < 3; i++) {
+			res = &hose->mem_resources[i];
+			if ((res->flags & IORESOURCE_MEM) &&
+				addr >= res->start && addr <= res->end)
+				return 1;
+		}
+	}
+	return 0;
+}
+
+int fsl_pci_mcheck_exception(struct pt_regs *regs)
+{
+	u32 inst;
+	int ret;
+	phys_addr_t addr = 0;
+
+	/* Let KVM/QEMU deal with the exception */
+	if (regs->msr & MSR_GS)
+		return 0;
+
+#ifdef CONFIG_PHYS_64BIT
+	addr = mfspr(SPRN_MCARU);
+	addr <<= 32;
+#endif
+	addr += mfspr(SPRN_MCAR);
+
+	if (is_in_pci_mem_space(addr)) {
+		if (user_mode(regs)) {
+			pagefault_disable();
+			ret = get_user(regs->nip, &inst);
+			pagefault_enable();
+		} else {
+			ret = probe_kernel_address(regs->nip, inst);
+		}
+
+		if (mcheck_handle_load(regs, inst)) {
+			regs->nip += 4;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+#endif
+
 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static const struct of_device_id pci_ids[] = {
 	{ .compatible = "fsl,mpc8540-pci", },
@@ -928,28 +1088,10 @@ static int fsl_pci_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct device_node *node;
-#ifdef CONFIG_SWIOTLB
-	struct pci_controller *hose;
-#endif
 
 	node = pdev->dev.of_node;
 	ret = fsl_add_bridge(pdev, fsl_pci_primary == node);
 
-#ifdef CONFIG_SWIOTLB
-	if (ret == 0) {
-		hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
-
-		/*
-		 * if we couldn't map all of DRAM via the dma windows
-		 * we need SWIOTLB to handle buffers located outside of
-		 * dma capable memory region
-		 */
-		if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
-				hose->dma_window_size)
-			ppc_swiotlb_enable = 1;
-	}
-#endif
-
 	mpc85xx_pci_err_probe(pdev);
 
 	return 0;

arch/powerpc/sysdev/fsl_pci.h

@@ -126,5 +126,11 @@ static inline int mpc85xx_pci_err_probe(struct platform_device *op)
 }
 #endif
 
+#ifdef CONFIG_FSL_PCI
+extern int fsl_pci_mcheck_exception(struct pt_regs *);
+#else
+static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; }
+#endif
+
 #endif /* __POWERPC_FSL_PCI_H */
 #endif /* __KERNEL__ */