Merge branch 'for-2.6.36' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc

include/sound/tlv320dac33-plat.h

@@ -15,6 +15,8 @@
 
 struct tlv320dac33_platform_data {
 	int power_gpio;
+	int mode1_latency; /* latency caused by the i2c writes in us */
+	int auto_fifo_config; /* FIFO config based on the period size */
 	int keep_bclk;	/* Keep the BCLK running in FIFO modes */
 	u8 burst_bclkdiv;
 };

sound/soc/codecs/tlv320dac33.c

@@ -49,8 +49,6 @@
 
 #define NSAMPLE_MAX		5700
 
-#define LATENCY_TIME_MS		20
-
 #define MODE7_LTHR		10
 #define MODE7_UTHR		(DAC33_BUFFER_SIZE_SAMPLES - 10)
 
@@ -62,6 +60,9 @@
 #define US_TO_SAMPLES(rate, us) \
 	(rate / (1000000 / us))
 
+#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \
+	((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate)))
+
 static void dac33_calculate_times(struct snd_pcm_substream *substream);
 static int dac33_prepare_chip(struct snd_pcm_substream *substream);
 
@@ -107,6 +108,10 @@ struct tlv320dac33_priv {
 					 * this */
 	enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */
 	unsigned int nsample;		/* burst read amount from host */
+	int mode1_latency;		/* latency caused by the i2c writes in
+					 * us */
+	int auto_fifo_config; 		/* Configure the FIFO based on the
+					 * period size */
 	u8 burst_bclkdiv;		/* BCLK divider value in burst mode */
 	unsigned int burst_rate;	/* Interface speed in Burst modes */
 
@@ -538,13 +543,16 @@ static const struct snd_kcontrol_new dac33_snd_controls[] = {
 		 DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1),
 };
 
-static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = {
+static const struct snd_kcontrol_new dac33_mode_snd_controls[] = {
+	SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum,
+		 dac33_get_fifo_mode, dac33_set_fifo_mode),
+};
+
+static const struct snd_kcontrol_new dac33_fifo_snd_controls[] = {
 	SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
-		 dac33_get_nsample, dac33_set_nsample),
+		dac33_get_nsample, dac33_set_nsample),
 	SOC_SINGLE_EXT("UTHR", 0, 0, MODE7_UTHR, 0,
 		 dac33_get_uthr, dac33_set_uthr),
-	SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum,
-		 dac33_get_fifo_mode, dac33_set_fifo_mode),
 };
 
 /* Analog bypass */
@@ -649,7 +657,7 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_MODE1:
 		dac33_write16(codec, DAC33_NSAMPLE_MSB,
-			DAC33_THRREG(dac33->nsample + dac33->alarm_threshold));
+			DAC33_THRREG(dac33->nsample));
 
 		/* Take the timestamps */
 		spin_lock_irq(&dac33->lock);
@@ -798,6 +806,10 @@ static void dac33_shutdown(struct snd_pcm_substream *substream,
 	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
 
 	dac33->substream = NULL;
+
+	/* Reset the nSample restrictions */
+	dac33->nsample_min = 0;
+	dac33->nsample_max = NSAMPLE_MAX;
 }
 
 static int dac33_hw_params(struct snd_pcm_substream *substream,
@@ -1040,54 +1052,68 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream)
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+	unsigned int period_size = substream->runtime->period_size;
+	unsigned int rate = substream->runtime->rate;
 	unsigned int nsample_limit;
 
 	/* In bypass mode we don't need to calculate */
 	if (!dac33->fifo_mode)
 		return;
 
-	/* Number of samples (16bit, stereo) in one period */
-	dac33->nsample_min = snd_pcm_lib_period_bytes(substream) / 4;
-
-	/* Number of samples (16bit, stereo) in ALSA buffer */
-	dac33->nsample_max = snd_pcm_lib_buffer_bytes(substream) / 4;
-	/* Subtract one period from the total */
-	dac33->nsample_max -= dac33->nsample_min;
-
-	/* Number of samples for LATENCY_TIME_MS / 2 */
-	dac33->alarm_threshold = substream->runtime->rate /
-				 (1000 / (LATENCY_TIME_MS / 2));
-
-	/* Find and fix up the lowest nsmaple limit */
-	nsample_limit = substream->runtime->rate / (1000 / LATENCY_TIME_MS);
-
-	if (dac33->nsample_min < nsample_limit)
-		dac33->nsample_min = nsample_limit;
-
-	if (dac33->nsample < dac33->nsample_min)
-		dac33->nsample = dac33->nsample_min;
-
-	/*
-	 * Find and fix up the highest nsmaple limit
-	 * In order to not overflow the DAC33 buffer substract the
-	 * alarm_threshold value from the size of the DAC33 buffer
-	 */
-	nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - dac33->alarm_threshold;
-
-	if (dac33->nsample_max > nsample_limit)
-		dac33->nsample_max = nsample_limit;
-
-	if (dac33->nsample > dac33->nsample_max)
-		dac33->nsample = dac33->nsample_max;
-
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_MODE1:
+		/* Number of samples under i2c latency */
+		dac33->alarm_threshold = US_TO_SAMPLES(rate,
+						dac33->mode1_latency);
+		if (dac33->auto_fifo_config) {
+			if (period_size <= dac33->alarm_threshold)
+				/*
+				 * Configure nSamaple to number of periods,
+				 * which covers the latency requironment.
+				 */
+				dac33->nsample = period_size *
+				       ((dac33->alarm_threshold / period_size) +
+				       (dac33->alarm_threshold % period_size ?
+				       1 : 0));
+			else
+				dac33->nsample = period_size;
+		} else {
+			/* nSample time shall not be shorter than i2c latency */
+			dac33->nsample_min = dac33->alarm_threshold;
+			/*
+			 * nSample should not be bigger than alsa buffer minus
+			 * size of one period to avoid overruns
+			 */
+			dac33->nsample_max = substream->runtime->buffer_size -
+						period_size;
+			nsample_limit = DAC33_BUFFER_SIZE_SAMPLES -
+					dac33->alarm_threshold;
+			if (dac33->nsample_max > nsample_limit)
+				dac33->nsample_max = nsample_limit;
+
+			/* Correct the nSample if it is outside of the ranges */
+			if (dac33->nsample < dac33->nsample_min)
+				dac33->nsample = dac33->nsample_min;
+			if (dac33->nsample > dac33->nsample_max)
+				dac33->nsample = dac33->nsample_max;
+		}
+
 		dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate,
 						      dac33->nsample);
 		dac33->t_stamp1 = 0;
 		dac33->t_stamp2 = 0;
 		break;
 	case DAC33_FIFO_MODE7:
+		if (dac33->auto_fifo_config) {
+			dac33->uthr = UTHR_FROM_PERIOD_SIZE(
+					period_size,
+					rate,
+					dac33->burst_rate) + 9;
+			if (dac33->uthr > MODE7_UTHR)
+				dac33->uthr = MODE7_UTHR;
+			if (dac33->uthr < (MODE7_LTHR + 10))
+				dac33->uthr = (MODE7_LTHR + 10);
+		}
 		dac33->mode7_us_to_lthr =
 				SAMPLES_TO_US(substream->runtime->rate,
 					dac33->uthr - MODE7_LTHR + 1);
@@ -1385,10 +1411,15 @@ static int dac33_soc_probe(struct platform_device *pdev)
 
 	snd_soc_add_controls(codec, dac33_snd_controls,
 			     ARRAY_SIZE(dac33_snd_controls));
-	/* Only add the nSample controls, if we have valid IRQ number */
-	if (dac33->irq >= 0)
-		snd_soc_add_controls(codec, dac33_nsample_snd_controls,
-				     ARRAY_SIZE(dac33_nsample_snd_controls));
+	/* Only add the FIFO controls, if we have valid IRQ number */
+	if (dac33->irq >= 0) {
+		snd_soc_add_controls(codec, dac33_mode_snd_controls,
+				     ARRAY_SIZE(dac33_mode_snd_controls));
+		/* FIFO usage controls only, if autoio config is not selected */
+		if (!dac33->auto_fifo_config)
+			snd_soc_add_controls(codec, dac33_fifo_snd_controls,
+					ARRAY_SIZE(dac33_fifo_snd_controls));
+	}
 
 	dac33_add_widgets(codec);
 
@@ -1519,6 +1550,10 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client,
 	/* Pre calculate the burst rate */
 	dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32;
 	dac33->keep_bclk = pdata->keep_bclk;
+	dac33->auto_fifo_config = pdata->auto_fifo_config;
+	dac33->mode1_latency = pdata->mode1_latency;
+	if (!dac33->mode1_latency)
+		dac33->mode1_latency = 10000; /* 10ms */
 	dac33->irq = client->irq;
 	dac33->nsample = NSAMPLE_MAX;
 	dac33->nsample_max = NSAMPLE_MAX;

sound/soc/codecs/twl4030.c

@@ -1432,11 +1432,9 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	   TX2 Left/Right: either analog Left/Right or Digimic1 */
 	SND_SOC_DAPM_MUX_E("TX1 Capture Route", SND_SOC_NOPM, 0, 0,
 		&twl4030_dapm_micpathtx1_control, micpath_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
 		SND_SOC_DAPM_POST_REG),
 	SND_SOC_DAPM_MUX_E("TX2 Capture Route", SND_SOC_NOPM, 0, 0,
 		&twl4030_dapm_micpathtx2_control, micpath_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
 		SND_SOC_DAPM_POST_REG),
 
 	/* Analog input mixers for the capture amplifiers */

sound/soc/omap/omap-mcbsp.c

@@ -155,13 +155,23 @@ static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
+	struct omap_pcm_dma_data *dma_data;
 	int dma_op_mode = omap_mcbsp_get_dma_op_mode(mcbsp_data->bus_id);
 	int words;
 
+	dma_data = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
+
 	/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
 	if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
-		/* The FIFO size depends on the McBSP word configuration */
-		words = snd_pcm_lib_period_bytes(substream) /
+		/*
+		 * Configure McBSP threshold based on either:
+		 * packet_size, when the sDMA is in packet mode, or
+		 * based on the period size.
+		 */
+		if (dma_data->packet_size)
+			words = dma_data->packet_size;
+		else
+			words = snd_pcm_lib_period_bytes(substream) /
 							(mcbsp_data->wlen / 8);
 	else
 		words = 1;
@@ -192,31 +202,6 @@ static int omap_mcbsp_hwrule_min_buffersize(struct snd_pcm_hw_params *params,
 	return snd_interval_refine(buffer_size, &frames);
 }
 
-static int omap_mcbsp_hwrule_max_periodsize(struct snd_pcm_hw_params *params,
-				    struct snd_pcm_hw_rule *rule)
-{
-	struct snd_interval *period_size = hw_param_interval(params,
-					SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
-	struct snd_interval *channels = hw_param_interval(params,
-					SNDRV_PCM_HW_PARAM_CHANNELS);
-	struct snd_pcm_substream *substream = rule->private;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
-	struct snd_interval frames;
-	int size;
-
-	snd_interval_any(&frames);
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		size = omap_mcbsp_get_max_tx_threshold(mcbsp_data->bus_id);
-	else
-		size = omap_mcbsp_get_max_rx_threshold(mcbsp_data->bus_id);
-
-	frames.max = size / channels->min;
-	frames.integer = 1;
-	return snd_interval_refine(period_size, &frames);
-}
-
 static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
 				  struct snd_soc_dai *dai)
 {
@@ -245,10 +230,8 @@ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
 	 * 4 channels: size is 128 / 4 = 32 frames (4 * 32 words)
 	 */
 	if (cpu_is_omap343x()) {
-		int dma_op_mode = omap_mcbsp_get_dma_op_mode(bus_id);
-
 		/*
-		* The first rule is for the buffer size, we should not allow
+		* Rule for the buffer size. We should not allow
 		* smaller buffer than the FIFO size to avoid underruns
 		*/
 		snd_pcm_hw_rule_add(substream->runtime, 0,
@@ -257,17 +240,9 @@ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
 				    mcbsp_data,
 				    SNDRV_PCM_HW_PARAM_BUFFER_SIZE, -1);
 
-		/*
-		 * In case of threshold mode, the rule will ensure, that the
-		 * period size is not bigger than the maximum allowed threshold
-		 * value.
-		 */
-		if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
-			snd_pcm_hw_rule_add(substream->runtime, 0,
-					    SNDRV_PCM_HW_PARAM_CHANNELS,
-					    omap_mcbsp_hwrule_max_periodsize,
-					    substream,
-					    SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1);
+		/* Make sure, that the period size is always even */
+		snd_pcm_hw_constraint_step(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
 	}
 
 	return err;
@@ -348,11 +323,14 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
-	int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
+	struct omap_pcm_dma_data *dma_data;
+	int dma, bus_id = mcbsp_data->bus_id;
 	int wlen, channels, wpf, sync_mode = OMAP_DMA_SYNC_ELEMENT;
+	int pkt_size = 0;
 	unsigned long port;
 	unsigned int format, div, framesize, master;
 
+	dma_data = &omap_mcbsp_dai_dma_params[cpu_dai->id][substream->stream];
 	if (cpu_class_is_omap1()) {
 		dma = omap1_dma_reqs[bus_id][substream->stream];
 		port = omap1_mcbsp_port[bus_id][substream->stream];
@@ -365,35 +343,74 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	} else if (cpu_is_omap343x()) {
 		dma = omap24xx_dma_reqs[bus_id][substream->stream];
 		port = omap34xx_mcbsp_port[bus_id][substream->stream];
-		omap_mcbsp_dai_dma_params[id][substream->stream].set_threshold =
-						omap_mcbsp_set_threshold;
-		/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
-		if (omap_mcbsp_get_dma_op_mode(bus_id) ==
-						MCBSP_DMA_MODE_THRESHOLD)
-			sync_mode = OMAP_DMA_SYNC_FRAME;
 	} else {
 		return -ENODEV;
 	}
-	omap_mcbsp_dai_dma_params[id][substream->stream].name =
-		substream->stream ? "Audio Capture" : "Audio Playback";
-	omap_mcbsp_dai_dma_params[id][substream->stream].dma_req = dma;
-	omap_mcbsp_dai_dma_params[id][substream->stream].port_addr = port;
-	omap_mcbsp_dai_dma_params[id][substream->stream].sync_mode = sync_mode;
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
-		omap_mcbsp_dai_dma_params[id][substream->stream].data_type =
-			 OMAP_DMA_DATA_TYPE_S16;
+		dma_data->data_type = OMAP_DMA_DATA_TYPE_S16;
+		wlen = 16;
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
-		omap_mcbsp_dai_dma_params[id][substream->stream].data_type =
-			 OMAP_DMA_DATA_TYPE_S32;
+		dma_data->data_type = OMAP_DMA_DATA_TYPE_S32;
+		wlen = 32;
 		break;
 	default:
 		return -EINVAL;
 	}
+	if (cpu_is_omap343x()) {
+		dma_data->set_threshold = omap_mcbsp_set_threshold;
+		/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
+		if (omap_mcbsp_get_dma_op_mode(bus_id) ==
+						MCBSP_DMA_MODE_THRESHOLD) {
+			int period_words, max_thrsh;
+
+			period_words = params_period_bytes(params) / (wlen / 8);
+			if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+				max_thrsh = omap_mcbsp_get_max_tx_threshold(
+							    mcbsp_data->bus_id);
+			else
+				max_thrsh = omap_mcbsp_get_max_rx_threshold(
+							    mcbsp_data->bus_id);
+			/*
+			 * If the period contains less or equal number of words,
+			 * we are using the original threshold mode setup:
+			 * McBSP threshold = sDMA frame size = period_size
+			 * Otherwise we switch to sDMA packet mode:
+			 * McBSP threshold = sDMA packet size
+			 * sDMA frame size = period size
+			 */
+			if (period_words > max_thrsh) {
+				int divider = 0;
+
+				/*
+				 * Look for the biggest threshold value, which
+				 * divides the period size evenly.
+				 */
+				divider = period_words / max_thrsh;
+				if (period_words % max_thrsh)
+					divider++;
+				while (period_words % divider &&
+					divider < period_words)
+					divider++;
+				if (divider == period_words)
+					return -EINVAL;
+
+				pkt_size = period_words / divider;
+				sync_mode = OMAP_DMA_SYNC_PACKET;
+			} else {
+				sync_mode = OMAP_DMA_SYNC_FRAME;
+			}
+		}
+	}
+
+	dma_data->name = substream->stream ? "Audio Capture" : "Audio Playback";
+	dma_data->dma_req = dma;
+	dma_data->port_addr = port;
+	dma_data->sync_mode = sync_mode;
+	dma_data->packet_size = pkt_size;
 
-	snd_soc_dai_set_dma_data(cpu_dai, substream,
-		&omap_mcbsp_dai_dma_params[id][substream->stream]);
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
 
 	if (mcbsp_data->configured) {
 		/* McBSP already configured by another stream */
@@ -419,7 +436,6 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
 		/* Set word lengths */
-		wlen = 16;
 		regs->rcr2	|= RWDLEN2(OMAP_MCBSP_WORD_16);
 		regs->rcr1	|= RWDLEN1(OMAP_MCBSP_WORD_16);
 		regs->xcr2	|= XWDLEN2(OMAP_MCBSP_WORD_16);
@@ -427,7 +443,6 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
 		/* Set word lengths */
-		wlen = 32;
 		regs->rcr2	|= RWDLEN2(OMAP_MCBSP_WORD_32);
 		regs->rcr1	|= RWDLEN1(OMAP_MCBSP_WORD_32);
 		regs->xcr2	|= XWDLEN2(OMAP_MCBSP_WORD_32);