[ARM] 5336/1: Formatting/Whitespace cleanups in mach-sa1100

This patch fixes bad formatting found in
mach-sa1100 files.

What it does is to replace/delete things like
excessive spaces (start || endline). The code
looks the same just alot less junk.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-sa1100/collie.c

@@ -68,23 +68,22 @@ struct platform_device colliescoop_device = {
 };
 
 static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
-{
-       .dev        = &colliescoop_device.dev,
-       .irq        = COLLIE_IRQ_GPIO_CF_IRQ,
-       .cd_irq     = COLLIE_IRQ_GPIO_CF_CD,
-       .cd_irq_str = "PCMCIA0 CD",
-},
+	{
+	.dev		= &colliescoop_device.dev,
+	.irq		= COLLIE_IRQ_GPIO_CF_IRQ,
+	.cd_irq		= COLLIE_IRQ_GPIO_CF_CD,
+	.cd_irq_str	= "PCMCIA0 CD",
+	},
 };
 
 static struct scoop_pcmcia_config collie_pcmcia_config = {
-	.devs         = &collie_pcmcia_scoop[0],
-	.num_devs     = 1,
+	.devs		= &collie_pcmcia_scoop[0],
+	.num_devs	= 1,
 };
 
-
 static struct mcp_plat_data collie_mcp_data = {
-	.mccr0          = MCCR0_ADM | MCCR0_ExtClk,
-	.sclk_rate      = 9216000,
+	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
+	.sclk_rate	= 9216000,
 };
 
 #ifdef CONFIG_SHARP_LOCOMO
@@ -95,14 +94,14 @@ struct platform_device collie_locomo_device;
 
 static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
 {
- 	if (mctrl & TIOCM_RTS)
+	if (mctrl & TIOCM_RTS)
 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
- 	else
+	else
 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
 
- 	if (mctrl & TIOCM_DTR)
+	if (mctrl & TIOCM_DTR)
 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
- 	else
+	else
 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
 }
 

arch/arm/mach-sa1100/collie_pm.c

@@ -263,24 +263,24 @@ static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
 }
 
 static struct ucb1x00_driver collie_pm_ucb_driver = {
-	.add            = collie_pm_ucb_add,
+	.add	= collie_pm_ucb_add,
 };
 
 static struct platform_device *collie_pm_device;
 
 static int __init collie_pm_init(void)
 {
-        int ret;
+	int ret;
 
-        collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
-        if (!collie_pm_device)
-                return -ENOMEM;
+	collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
+	if (!collie_pm_device)
+		return -ENOMEM;
 
-        collie_pm_device->dev.platform_data = &collie_pm_machinfo;
-        ret = platform_device_add(collie_pm_device);
+	collie_pm_device->dev.platform_data = &collie_pm_machinfo;
+	ret = platform_device_add(collie_pm_device);
 
-        if (ret)
-                platform_device_put(collie_pm_device);
+	if (ret)
+		platform_device_put(collie_pm_device);
 
 	if (!ret)
 		ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
@@ -291,7 +291,7 @@ static int __init collie_pm_init(void)
 static void __exit collie_pm_exit(void)
 {
 	ucb1x00_unregister_driver(&collie_pm_ucb_driver);
-        platform_device_unregister(collie_pm_device);
+	platform_device_unregister(collie_pm_device);
 }
 
 module_init(collie_pm_init);

arch/arm/mach-sa1100/cpu-sa1100.c

@@ -3,17 +3,17 @@
  *
  * Copyright (C) 2000 2001, The Delft University of Technology
  *
- * Authors: 
+ * Authors:
  * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
  * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
  *   - major rewrite for linux-2.3.99
- *   - rewritten for the more generic power management scheme in 
+ *   - rewritten for the more generic power management scheme in
  *     linux-2.4.5-rmk1
  *
  * This software has been developed while working on the LART
  * computing board (http://www.lartmaker.nl/), which is
  * sponsored by the Mobile Multi-media Communications
- * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications 
+ * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications
  * (http://www.ubicom.tudelft.nl/) projects.
  *
  * The authors can be reached at:
@@ -36,7 +36,7 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
@@ -44,7 +44,7 @@
  *
  * Theory of operations
  * ====================
- * 
+ *
  * Clock scaling can be used to lower the power consumption of the CPU
  * core. This will give you a somewhat longer running time.
  *
@@ -58,11 +58,11 @@
  *   MDCNFG    0xA0000000    DRAM config
  *   MDCAS0    0xA0000004    Access waveform
  *   MDCAS1    0xA0000008    Access waveform
- *   MDCAS2    0xA000000C    Access waveform 
+ *   MDCAS2    0xA000000C    Access waveform
  *
  * Care must be taken to change the DRAM parameters the correct way,
  * because otherwise the DRAM becomes unusable and the kernel will
- * crash. 
+ * crash.
  *
  * The simple solution to avoid a kernel crash is to put the actual
  * clock change in ROM and jump to that code from the kernel. The main
@@ -75,7 +75,7 @@
  * as long as all re-configuration steps yield a valid DRAM
  * configuration. The advantages are clear: it will run on all SA-1100
  * platforms, and the code is very simple.
- * 
+ *
  * If you really want to understand what is going on in
  * sa1100_update_dram_timings(), you'll have to read sections 8.2,
  * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor
@@ -97,7 +97,7 @@
 typedef struct {
 	int speed;
 	u32 mdcnfg;
-	u32 mdcas0; 
+	u32 mdcas0;
 	u32 mdcas1;
 	u32 mdcas2;
 } sa1100_dram_regs_t;
@@ -147,7 +147,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed)
 	/* No risk, no fun: run with interrupts on! */
 	if (new_speed > current_speed) {
 		/* We're going FASTER, so first relax the memory
-		 * timings before changing the core frequency 
+		 * timings before changing the core frequency
 		 */
 		
 		/* Half the memory access clock */

arch/arm/mach-sa1100/cpu-sa1110.c

@@ -81,14 +81,14 @@ static struct sdram_params sdram_tbl[] __initdata = {
 		.twr		= 9,
 		.refresh	= 64000,
 		.cas_latency	= 3,
-	}, {    /* Samsung K4S281632B-1H */
-	        .name           = "K4S281632B-1H",
-		.rows           = 12,
-		.tck            = 10,
-		.trp            = 20,
-		.twr            = 10,
-		.refresh        = 64000,
-		.cas_latency    = 3,
+	}, {	/* Samsung K4S281632B-1H */
+		.name           = "K4S281632B-1H",
+		.rows		= 12,
+		.tck		= 10,
+		.trp		= 20,
+		.twr		= 10,
+		.refresh	= 64000,
+		.cas_latency	= 3,
 	}, {	/* Samsung KM416S4030CT */
 		.name		= "KM416S4030CT",
 		.rows		= 13,
@@ -220,7 +220,7 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
 }
 
 /*
- * Ok, set the CPU frequency.  
+ * Ok, set the CPU frequency.
  */
 static int sa1110_target(struct cpufreq_policy *policy,
 			 unsigned int target_freq,

arch/arm/mach-sa1100/dma.c

@@ -113,10 +113,10 @@ int sa1100_request_dma (dma_device_t device, const char *device_id,
 		}
 	}
 	if (!err) {
-	       if (dma)
-		       dma->device = device;
-	       else
-		       err = -ENOSR;
+		if (dma)
+			dma->device = device;
+		else
+			err = -ENOSR;
 	}
 	spin_unlock(&dma_list_lock);
 	if (err)

arch/arm/mach-sa1100/include/mach/h3600.h

@@ -32,14 +32,14 @@ typedef int __bitwise pm_request_t;
 #define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
 
 /* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS     (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS    SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS    SA1100_CS4_PHYS
+#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
 
 /* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT     0xf0000000
-#define H3600_BANK_2_VIRT    0xf1000000
-#define H3600_BANK_4_VIRT    0xf3800000
+#define H3600_EGPIO_VIRT	0xf0000000
+#define H3600_BANK_2_VIRT	0xf1000000
+#define H3600_BANK_4_VIRT	0xf3800000
 
 /*
    Machine-independent GPIO definitions

arch/arm/mach-sa1100/pleb.c

@@ -122,12 +122,12 @@ static void __init pleb_map_io(void)
 	sa1100_map_io();
 
 	sa1100_register_uart(0, 3);
-        sa1100_register_uart(1, 1);
+	sa1100_register_uart(1, 1);
 
-        GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-        GPDR |= GPIO_UART_TXD;
-        GPDR &= ~GPIO_UART_RXD;
-        PPAR |= PPAR_UPR;
+	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
+	GPDR |= GPIO_UART_TXD;
+	GPDR &= ~GPIO_UART_RXD;
+	PPAR |= PPAR_UPR;
 
 	/*
 	 * Fix expansion memory timing for network card

arch/arm/mach-sa1100/shannon.c

@@ -33,7 +33,7 @@ static struct mtd_partition shannon_partitions[] = {
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 0xe0000
 	},
-	{ 
+	{
 		.name		= "initrd",
 		.offset		= MTDPART_OFS_APPEND,	
 		.size		= MTDPART_SIZ_FULL

arch/arm/mach-sa1100/sleep.S

@@ -100,36 +100,36 @@ ENTRY(sa1100_cpu_suspend)
 	ldr	r1, =MSC1
 	ldr	r2, =MSC2
 
-        ldr     r3, [r0]
-        bic     r3, r3, #FMsk(MSC_RT)
-        bic     r3, r3, #FMsk(MSC_RT)<<16
+	ldr	r3, [r0]
+	bic	r3, r3, #FMsk(MSC_RT)
+	bic	r3, r3, #FMsk(MSC_RT)<<16
 
-        ldr     r4, [r1]
-        bic     r4, r4, #FMsk(MSC_RT)
-        bic     r4, r4, #FMsk(MSC_RT)<<16
+	ldr	r4, [r1]
+	bic	r4, r4, #FMsk(MSC_RT)
+	bic	r4, r4, #FMsk(MSC_RT)<<16
 
-        ldr     r5, [r2]
-        bic     r5, r5, #FMsk(MSC_RT)
-        bic     r5, r5, #FMsk(MSC_RT)<<16
+	ldr	r5, [r2]
+	bic	r5, r5, #FMsk(MSC_RT)
+	bic	r5, r5, #FMsk(MSC_RT)<<16
 
-        ldr     r6, =MDREFR
+	ldr	r6, =MDREFR
 
-        ldr     r7, [r6]
-        bic     r7, r7, #0x0000FF00
-        bic     r7, r7, #0x000000F0
-        orr     r8, r7, #MDREFR_SLFRSH
+	ldr	r7, [r6]
+bic	r7, r7, #0x0000FF00
+bic	r7, r7, #0x000000F0
+orr	r8, r7, #MDREFR_SLFRSH
 
-        ldr     r9, =MDCNFG
-        ldr     r10, [r9]
-        bic     r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
-        bic     r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
+	ldr	r9, =MDCNFG
+	ldr	r10, [r9]
+	bic	r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
+	bic	r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
 
-        bic     r11, r8, #MDREFR_SLFRSH
-        bic     r11, r11, #MDREFR_E1PIN
+	bic	r11, r8, #MDREFR_SLFRSH
+	bic	r11, r11, #MDREFR_E1PIN
 
-        ldr     r12, =PMCR
+	ldr	r12, =PMCR
 
-        mov     r13, #PMCR_SF
+	mov	r13, #PMCR_SF
 
 	b	sa1110_sdram_controller_fix
 
@@ -188,10 +188,10 @@ ENTRY(sa1100_cpu_resume)
 	mcr	p15, 0, r1, c8, c7, 0   	@ flush I+D TLBs
 	mcr	p15, 0, r1, c7, c7, 0		@ flush I&D cache
 	mcr	p15, 0, r1, c9, c0, 0		@ invalidate RB
-	mcr     p15, 0, r1, c9, c0, 5		@ allow user space to use RB
+	mcr	p15, 0, r1, c9, c0, 5		@ allow user space to use RB
 
-	mcr 	p15, 0, r4, c3, c0, 0		@ domain ID
-	mcr 	p15, 0, r5, c2, c0, 0		@ translation table base addr
+	mcr	p15, 0, r4, c3, c0, 0		@ domain ID
+	mcr	p15, 0, r5, c2, c0, 0		@ translation table base addr
 	mcr	p15, 0, r6, c13, c0, 0		@ PID
 	b	resume_turn_on_mmu		@ cache align execution
 
@@ -209,7 +209,7 @@ sleep_save_sp:
 
 	.text
 resume_after_mmu:
-	mcr     p15, 0, r1, c15, c1, 2		@ enable clock switching
+	mcr	p15, 0, r1, c15, c1, 2		@ enable clock switching
 	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
 
 

arch/arm/mach-sa1100/time.c

@@ -2,8 +2,8 @@
  * linux/arch/arm/mach-sa1100/time.c
  *
  * Copyright (C) 1998 Deborah Wallach.
- * Twiddles  (C) 1999 	Hugo Fiennes <hugo@empeg.com>
- * 
+ * Twiddles  (C) 1999 Hugo Fiennes <hugo@empeg.com>
+ *
  * 2000/03/29 (C) Nicolas Pitre <nico@cam.org>
  *	Rewritten: big cleanup, much simpler, better HZ accuracy.
  *