staging: brcm80211: fix "ERROR: space required after that ..."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/sys/wl_dbg.h

@@ -25,10 +25,10 @@ extern uint32 wl_msg_level;
 
 #ifdef BCMDBG
 
-#define	WL_ERROR(args)		do {if ((wl_msg_level & WL_ERROR_VAL)) WL_PRINT(args);} while (0)
-#define	WL_TRACE(args)		do {if (wl_msg_level & WL_TRACE_VAL) WL_PRINT(args);} while (0)
-#define WL_AMPDU(args)		do {if (wl_msg_level & WL_AMPDU_VAL) WL_PRINT(args);} while (0)
-#define WL_FFPLD(args)		do {if (wl_msg_level & WL_FFPLD_VAL) WL_PRINT(args);} while (0)
+#define	WL_ERROR(args)		do {if ((wl_msg_level & WL_ERROR_VAL)) WL_PRINT(args); } while (0)
+#define	WL_TRACE(args)		do {if (wl_msg_level & WL_TRACE_VAL) WL_PRINT(args); } while (0)
+#define WL_AMPDU(args)		do {if (wl_msg_level & WL_AMPDU_VAL) WL_PRINT(args); } while (0)
+#define WL_FFPLD(args)		do {if (wl_msg_level & WL_FFPLD_VAL) WL_PRINT(args); } while (0)
 
 #define WL_ERROR_ON()		(wl_msg_level & WL_ERROR_VAL)
 
@@ -44,14 +44,14 @@ extern uint32 wl_msg_level;
 
 extern uint32 wl_ampdu_dbg;
 
-#define WL_AMPDU_UPDN(args) do {if (wl_ampdu_dbg & WL_AMPDU_UPDN_VAL) {WL_AMPDU(args);} } while (0)
-#define WL_AMPDU_RX(args) do {if (wl_ampdu_dbg & WL_AMPDU_RX_VAL) {WL_AMPDU(args);} } while (0)
-#define WL_AMPDU_ERR(args) do {if (wl_ampdu_dbg & WL_AMPDU_ERR_VAL) {WL_AMPDU(args);} } while (0)
-#define WL_AMPDU_TX(args) do {if (wl_ampdu_dbg & WL_AMPDU_TX_VAL) {WL_AMPDU(args);} } while (0)
-#define WL_AMPDU_CTL(args) do {if (wl_ampdu_dbg & WL_AMPDU_CTL_VAL) {WL_AMPDU(args);} } while (0)
-#define WL_AMPDU_HW(args) do {if (wl_ampdu_dbg & WL_AMPDU_HW_VAL) {WL_AMPDU(args);} } while (0)
-#define WL_AMPDU_HWTXS(args) do {if (wl_ampdu_dbg & WL_AMPDU_HWTXS_VAL) {WL_AMPDU(args);} } while (0)
-#define WL_AMPDU_HWDBG(args) do {if (wl_ampdu_dbg & WL_AMPDU_HWDBG_VAL) {WL_AMPDU(args);} } while (0)
+#define WL_AMPDU_UPDN(args) do {if (wl_ampdu_dbg & WL_AMPDU_UPDN_VAL) {WL_AMPDU(args); } } while (0)
+#define WL_AMPDU_RX(args) do {if (wl_ampdu_dbg & WL_AMPDU_RX_VAL) {WL_AMPDU(args); } } while (0)
+#define WL_AMPDU_ERR(args) do {if (wl_ampdu_dbg & WL_AMPDU_ERR_VAL) {WL_AMPDU(args); } } while (0)
+#define WL_AMPDU_TX(args) do {if (wl_ampdu_dbg & WL_AMPDU_TX_VAL) {WL_AMPDU(args); } } while (0)
+#define WL_AMPDU_CTL(args) do {if (wl_ampdu_dbg & WL_AMPDU_CTL_VAL) {WL_AMPDU(args); } } while (0)
+#define WL_AMPDU_HW(args) do {if (wl_ampdu_dbg & WL_AMPDU_HW_VAL) {WL_AMPDU(args); } } while (0)
+#define WL_AMPDU_HWTXS(args) do {if (wl_ampdu_dbg & WL_AMPDU_HWTXS_VAL) {WL_AMPDU(args); } } while (0)
+#define WL_AMPDU_HWDBG(args) do {if (wl_ampdu_dbg & WL_AMPDU_HWDBG_VAL) {WL_AMPDU(args); } } while (0)
 #define WL_AMPDU_ERR_ON() (wl_ampdu_dbg & WL_AMPDU_ERR_VAL)
 #define WL_AMPDU_HW_ON() (wl_ampdu_dbg & WL_AMPDU_HW_VAL)
 #define WL_AMPDU_HWTXS_ON() (wl_ampdu_dbg & WL_AMPDU_HWTXS_VAL)

drivers/staging/brcm80211/sys/wl_mac80211.h

@@ -126,8 +126,8 @@ struct wl_info {
 #define WL_UNLOCK(wl)	spin_unlock_bh(&(wl)->lock)
 
 /* locking from inside wl_isr */
-#define WL_ISRLOCK(wl, flags) do {spin_lock(&(wl)->isr_lock); (void)(flags);} while (0)
-#define WL_ISRUNLOCK(wl, flags) do {spin_unlock(&(wl)->isr_lock); (void)(flags);} while (0)
+#define WL_ISRLOCK(wl, flags) do {spin_lock(&(wl)->isr_lock); (void)(flags); } while (0)
+#define WL_ISRUNLOCK(wl, flags) do {spin_unlock(&(wl)->isr_lock); (void)(flags); } while (0)
 
 /* locking under WL_LOCK() to synchronize with wl_isr */
 #define INT_LOCK(wl, flags)	spin_lock_irqsave(&(wl)->isr_lock, flags)

drivers/staging/brcm80211/sys/wlc_key.h

@@ -130,7 +130,7 @@ typedef struct {
 #define wlc_key_hw_wowl_init(a, b, c, d) do {} while (0)
 #define wlc_key_sw_wowl_update(a, b, c, d, e) do {} while (0)
 #define wlc_key_sw_wowl_create(a, b, c) (BCME_ERROR)
-#define wlc_key_iv_update(a, b, c, d, e) do {(void)e;} while (0)
+#define wlc_key_iv_update(a, b, c, d, e) do {(void)e; } while (0)
 #define wlc_key_iv_init(a, b, c) do {} while (0)
 #define wlc_key_set_error(a, b, c) (BCME_ERROR)
 #define wlc_key_dump_hw(a, b) (BCME_ERROR)

drivers/staging/brcm80211/sys/wlc_pub.h

@@ -566,8 +566,8 @@ extern const uint8 wme_fifo2ac[];
 #define WLC_UPDATE_STATS(wlc)	0	/* No stats support */
 #define WLCNTINCR(a)		/* No stats support */
 #define WLCNTDECR(a)		/* No stats support */
-#define WLCNTADD(a,delta)	/* No stats support */
-#define WLCNTSET(a,value)	/* No stats support */
+#define WLCNTADD(a, delta)	/* No stats support */
+#define WLCNTSET(a, value)	/* No stats support */
 #define WLCNTVAL(a)		0	/* No stats support */
 
 /* common functions for every port */

drivers/staging/brcm80211/sys/wlc_scb.h

@@ -201,8 +201,8 @@ struct scb {
 
 #define WLCNTSCBINCR(a)		/* No stats support */
 #define WLCNTSCBDECR(a)		/* No stats support */
-#define WLCNTSCBADD(a,delta)	/* No stats support */
-#define WLCNTSCBSET(a,value)	/* No stats support */
+#define WLCNTSCBADD(a, delta)	/* No stats support */
+#define WLCNTSCBSET(a, value)	/* No stats support */
 #define WLCNTSCBVAL(a)		0	/* No stats support */
 #define WLCNTSCB_COND_SET(c, a, v)	/* No stats support */
 #define WLCNTSCB_COND_ADD(c, a, d)	/* No stats support */

drivers/staging/brcm80211/util/bcmotp.c

@@ -149,7 +149,7 @@ static otpinfo_t otpinfo;
 #define OTPGU_P_SHIFT		(OTPGU_HWP_OFF % 16)
 
 /* OTP Size */
-#define OTP_SZ_FU_324		((ROUNDUP(324,8))/8)	/* 324 bits */
+#define OTP_SZ_FU_324		((ROUNDUP(324, 8))/8)	/* 324 bits */
 #define OTP_SZ_FU_288		(288/8)	/* 288 bits */
 #define OTP_SZ_FU_216		(216/8)	/* 216 bits */
 #define OTP_SZ_FU_72		(72/8)	/* 72 bits */

drivers/staging/brcm80211/util/hndpmu.c

@@ -1875,7 +1875,8 @@ static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab1)[] = {
 	4, 0x2}, {
 	2, 0x3}, {
 	1, 0x0}, {
-0, 0x0} };
+	0, 0x0}
+	};
 
 /* SDIO Drive Strength to sel value table for PMU Rev 2, 3 */
 static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab2)[] = {
@@ -1886,7 +1887,8 @@ static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab2)[] = {
 	6, 0x4}, {
 	4, 0x2}, {
 	2, 0x1}, {
-0, 0x0} };
+	0, 0x0}
+	};
 
 /* SDIO Drive Strength to sel value table for PMU Rev 8 (1.8V) */
 static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab3)[] = {
@@ -1898,7 +1900,8 @@ static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab3)[] = {
 	12, 0x3}, {
 	8, 0x2}, {
 	4, 0x1}, {
-0, 0x0} };
+	0, 0x0}
+	};
 
 #define SDIOD_DRVSTR_KEY(chip, pmu)	(((chip) << 16) | (pmu))