staging: brcm80211: fix "ERROR: space required after that close brace"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/sys/wl_dbg.h

@@ -44,14 +44,14 @@ extern uint32 wl_msg_level;
 
 extern uint32 wl_ampdu_dbg;
 
-#define WL_AMPDU_UPDN(args) do {if (wl_ampdu_dbg & WL_AMPDU_UPDN_VAL) {WL_AMPDU(args);}} while (0)
-#define WL_AMPDU_RX(args) do {if (wl_ampdu_dbg & WL_AMPDU_RX_VAL) {WL_AMPDU(args);}} while (0)
-#define WL_AMPDU_ERR(args) do {if (wl_ampdu_dbg & WL_AMPDU_ERR_VAL) {WL_AMPDU(args);}} while (0)
-#define WL_AMPDU_TX(args) do {if (wl_ampdu_dbg & WL_AMPDU_TX_VAL) {WL_AMPDU(args);}} while (0)
-#define WL_AMPDU_CTL(args) do {if (wl_ampdu_dbg & WL_AMPDU_CTL_VAL) {WL_AMPDU(args);}} while (0)
-#define WL_AMPDU_HW(args) do {if (wl_ampdu_dbg & WL_AMPDU_HW_VAL) {WL_AMPDU(args);}} while (0)
-#define WL_AMPDU_HWTXS(args) do {if (wl_ampdu_dbg & WL_AMPDU_HWTXS_VAL) {WL_AMPDU(args);}} while (0)
-#define WL_AMPDU_HWDBG(args) do {if (wl_ampdu_dbg & WL_AMPDU_HWDBG_VAL) {WL_AMPDU(args);}} while (0)
+#define WL_AMPDU_UPDN(args) do {if (wl_ampdu_dbg & WL_AMPDU_UPDN_VAL) {WL_AMPDU(args);} } while (0)
+#define WL_AMPDU_RX(args) do {if (wl_ampdu_dbg & WL_AMPDU_RX_VAL) {WL_AMPDU(args);} } while (0)
+#define WL_AMPDU_ERR(args) do {if (wl_ampdu_dbg & WL_AMPDU_ERR_VAL) {WL_AMPDU(args);} } while (0)
+#define WL_AMPDU_TX(args) do {if (wl_ampdu_dbg & WL_AMPDU_TX_VAL) {WL_AMPDU(args);} } while (0)
+#define WL_AMPDU_CTL(args) do {if (wl_ampdu_dbg & WL_AMPDU_CTL_VAL) {WL_AMPDU(args);} } while (0)
+#define WL_AMPDU_HW(args) do {if (wl_ampdu_dbg & WL_AMPDU_HW_VAL) {WL_AMPDU(args);} } while (0)
+#define WL_AMPDU_HWTXS(args) do {if (wl_ampdu_dbg & WL_AMPDU_HWTXS_VAL) {WL_AMPDU(args);} } while (0)
+#define WL_AMPDU_HWDBG(args) do {if (wl_ampdu_dbg & WL_AMPDU_HWDBG_VAL) {WL_AMPDU(args);} } while (0)
 #define WL_AMPDU_ERR_ON() (wl_ampdu_dbg & WL_AMPDU_ERR_VAL)
 #define WL_AMPDU_HW_ON() (wl_ampdu_dbg & WL_AMPDU_HW_VAL)
 #define WL_AMPDU_HWTXS_ON() (wl_ampdu_dbg & WL_AMPDU_HWTXS_VAL)

drivers/staging/brcm80211/util/hndpmu.c

@@ -1875,7 +1875,7 @@ static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab1)[] = {
 	4, 0x2}, {
 	2, 0x3}, {
 	1, 0x0}, {
-0, 0x0}};
+0, 0x0} };
 
 /* SDIO Drive Strength to sel value table for PMU Rev 2, 3 */
 static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab2)[] = {
@@ -1886,7 +1886,7 @@ static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab2)[] = {
 	6, 0x4}, {
 	4, 0x2}, {
 	2, 0x1}, {
-0, 0x0}};
+0, 0x0} };
 
 /* SDIO Drive Strength to sel value table for PMU Rev 8 (1.8V) */
 static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab3)[] = {
@@ -1898,7 +1898,7 @@ static const sdiod_drive_str_t BCMINITDATA(sdiod_drive_strength_tab3)[] = {
 	12, 0x3}, {
 	8, 0x2}, {
 	4, 0x1}, {
-0, 0x0}};
+0, 0x0} };
 
 #define SDIOD_DRVSTR_KEY(chip, pmu)	(((chip) << 16) | (pmu))