Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits)
  Blackfin SMC91X ethernet supporting driver: SMC91C111 LEDs are note drived in the kernel like in uboot
  Blackfin SPI driver: fix bug SPI DMA incomplete transmission
  Blackfin SPI driver: tweak spi cleanup function to match newer kernel changes
  Blackfin RTC drivers: update MAINTAINERS information
  Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENB
  Blackfin serial driver: actually implement the break_ctl() function
  Blackfin serial driver: ignore framing and parity errors
  Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPAR
  Blackfin arch: move HI/LO macros into blackfin.h and punt the rest of macros.h as it includes VDSP macros we never use
  Blackfin arch: redo our linker script a bit
  Blackfin arch: make sure we initialize our L1 Data B section properly based on the linked kernel
  Blackfin arch: fix bug can not wakeup from sleep via push buttons
  Blackfin arch: add support for Alon Bar-Lev's dynamic kernel command-line
  Blackfin arch: add missing gpio.h header to fix compiling in some pm configurations
  Blackfin arch: As Mike pointed out range goes form m..MAX_BLACKFIN_GPIO -1
  Blackfin arch: fix spelling typo in output
  Blackfin arch: try to split up functions like this into smaller units according to LKML review
  Blackfin arch: add proper ENDPROC()
  Blackfin arch: move more of our startup code to .init so it can be freed once we are up and running
  Blackfin arch: unify differences between our diff head.S files -- no functional changes
  ...

MAINTAINERS

@@ -723,42 +723,52 @@ M:	rpurdie@rpsys.net
 S:	Maintained
 
 BLACKFIN ARCHITECTURE
-P:     Aubrey Li
-M:     aubrey.li@analog.com
-P:     Bernd Schmidt
-M:     bernd.schmidt@analog.com
-P:     Bryan Wu
-M:     bryan.wu@analog.com
-P:     Grace Pan
-M:     grace.pan@analog.com
-P:     Michael Hennerich
-M:     michael.hennerich@analog.com
-P:     Mike Frysinger
-M:     michael.frysinger@analog.com
-P:     Jane Lv
-M:     jane.lv@analog.com
-P:     Jerry Zeng
-M:     jerry.zeng@analog.com
-P:     Jie Zhang
-M:     jie.zhang@analog.com
-P:     Robin Getz
-M:     robin.getz@analog.com
-P:     Roy Huang
-M:     roy.huang@analog.com
-P:     Sonic Zhang
-M:     sonic.zhang@analog.com
-P:     Yi Li
-M:     yi.li@analog.com
-L:     uclinux-dist-devel@blackfin.uclinux.org
-W:     http://blackfin.uclinux.org
-S:     Supported
+P:	Aubrey Li
+M:	aubrey.li@analog.com
+P:	Bernd Schmidt
+M:	bernd.schmidt@analog.com
+P:	Bryan Wu
+M:	bryan.wu@analog.com
+P:	Grace Pan
+M:	grace.pan@analog.com
+P:	Marc Hoffman
+M:	marc.hoffman@analog.com
+P:	Michael Hennerich
+M:	michael.hennerich@analog.com
+P:	Mike Frysinger
+M:	michael.frysinger@analog.com
+P:	Jerry Zeng
+M:	jerry.zeng@analog.com
+P:	Jie Zhang
+M:	jie.zhang@analog.com
+P:	Robin Getz
+M:	robin.getz@analog.com
+P:	Roy Huang
+M:	roy.huang@analog.com
+P:	Sonic Zhang
+M:	sonic.zhang@analog.com
+P:	Vivi Li
+M:	vivi.li@analog.com
+P:	Yi Li
+M:	yi.li@analog.com
+L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+W:	http://blackfin.uclinux.org
+S:	Supported
+
+BLACKFIN RTC DRIVER
+P:	Mike Frysinger
+M:	michael.frysinger@analog.com
+M:	vapier.adi@gmail.com
+L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+W:	http://blackfin.uclinux.org
+S:	Supported
 
 BLACKFIN SERIAL DRIVER
-P:     Aubrey Li
-M:     aubrey.li@analog.com
-L:     uclinux-dist-devel@blackfin.uclinux.org
-W:     http://blackfin.uclinux.org
-S:     Supported
+P:	Aubrey Li
+M:	aubrey.li@analog.com
+L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+W:	http://blackfin.uclinux.org
+S:	Supported
 
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
 P:	Thomas Sailer

arch/blackfin/Kconfig

@@ -394,41 +394,6 @@ config BFIN_IDLE_LED_PIN
 	default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2)
 	default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3)
 
-comment "Console UART Setup"
-
-choice
-	prompt "Baud Rate"
-	default BAUD_57600
-config BAUD_9600
-	bool "9600"
-config BAUD_19200
-	bool "19200"
-config BAUD_38400
-	bool "38400"
-config BAUD_57600
-	bool "57600"
-config BAUD_115200
-	bool "115200"
-endchoice
-
-choice
-	prompt "Parity"
-	default BAUD_NO_PARITY
-config  BAUD_NO_PARITY
-	bool "No Parity"
-config  BAUD_PARITY
-	bool "Parity"
-endchoice
-
-choice
-	prompt "Stop Bits"
-	default BAUD_1_STOPBIT
-config  BAUD_1_STOPBIT
-	bool "1"
-config  BAUD_2_STOPBIT
-	bool "2"
-endchoice
-
 endmenu
 
 

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -1,20 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19.3
+# Linux kernel version: 2.6.21.3
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
 CONFIG_BFIN=y
 CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_UCLINUX=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_IRQCHIP_DEMUX_GPIO=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -33,13 +34,16 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -54,9 +58,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_EPOLL=y
 CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_LIMIT_PAGECACHE is not set
 CONFIG_BUDDY=y
 # CONFIG_NP2 is not set
 CONFIG_SLAB=y
@@ -80,7 +82,9 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -109,7 +113,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF532 is not set
 CONFIG_BF533=y
 # CONFIG_BF534 is not set
-# CONFIG_BF535 is not set
 # CONFIG_BF536 is not set
 # CONFIG_BF537 is not set
 # CONFIG_BF561 is not set
@@ -125,6 +128,7 @@ CONFIG_BFIN533_EZKIT=y
 # CONFIG_BFIN537_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_EZKIT is not set
+# CONFIG_BFIN561_TEPLA is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_GENERIC_BOARD is not set
 CONFIG_MEM_MT48LC16M16A2TG_75=y
@@ -168,6 +172,7 @@ CONFIG_WDTIMER=13
 #
 # Board customizations
 #
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Board Setup
@@ -177,19 +182,6 @@ CONFIG_MEM_SIZE=32
 CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x1000
 
-#
-# Console UART Setup
-#
-# CONFIG_BAUD_9600 is not set
-# CONFIG_BAUD_19200 is not set
-# CONFIG_BAUD_38400 is not set
-CONFIG_BAUD_57600=y
-# CONFIG_BAUD_115200 is not set
-CONFIG_BAUD_NO_PARITY=y
-# CONFIG_BAUD_PARITY is not set
-CONFIG_BAUD_1_STOPBIT=y
-# CONFIG_BAUD_2_STOPBIT is not set
-
 #
 # Blackfin Kernel Optimizations
 #
@@ -199,6 +191,7 @@ CONFIG_BAUD_1_STOPBIT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 
@@ -217,6 +210,7 @@ CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
 CONFIG_RAMKERNEL=y
@@ -230,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -302,7 +297,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
 CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
@@ -330,6 +325,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -356,6 +352,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -399,7 +396,48 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
 # CONFIG_BT is not set
 # CONFIG_IEEE80211 is not set
 
@@ -434,6 +472,7 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -489,6 +528,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -519,6 +560,7 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -530,14 +572,12 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -636,7 +676,26 @@ CONFIG_SMC91X=y
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -649,12 +708,14 @@ CONFIG_SMC91X=y
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF533_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BF5xx_TIMERS is not set
 # CONFIG_BF5xx_PPI is not set
-# CONFIG_BFIN_SPORT is not set
+CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_AD5304 is not set
+# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -691,16 +752,19 @@ CONFIG_UNIX98_PTYS=y
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 CONFIG_BLACKFIN_DPMC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -716,8 +780,19 @@ CONFIG_BLACKFIN_DPMC=y
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
 
 #
 # Dallas's 1-wire bus
@@ -731,9 +806,16 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
 #
 # Multimedia devices
 #
@@ -747,15 +829,20 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+
 #
 # USB support
 #
@@ -776,6 +863,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 # MMC/SD Card support
 #
+# CONFIG_SPI_MMC is not set
 # CONFIG_MMC is not set
 
 #
@@ -821,8 +909,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 CONFIG_RTC_DRV_BFIN=y
 
@@ -839,6 +929,14 @@ CONFIG_RTC_DRV_BFIN=y
 # DMA Devices
 #
 
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
 #
 # PBX support
 #
@@ -847,13 +945,9 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -862,7 +956,8 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -913,7 +1008,6 @@ CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
 # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
 CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -945,7 +1039,8 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -961,7 +1056,51 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Native Language Support
 #
-# CONFIG_NLS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -975,19 +1114,16 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_BOOTPARAM is not set
-# CONFIG_NO_KERNEL_MSG is not set
 CONFIG_CPLB_INFO=y
-# CONFIG_NO_ACCESS_CHECK is not set
+CONFIG_ACCESS_CHECK=y
 
 #
 # Security options
@@ -995,7 +1131,7 @@ CONFIG_CPLB_INFO=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+CONFIG_SECURITY_CAPABILITIES=m
 
 #
 # Cryptographic options
@@ -1005,10 +1141,13 @@ CONFIG_SECURITY_CAPABILITIES=y
 #
 # Library routines
 #
-# CONFIG_CRC_CCITT is not set
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20.4
+# Linux kernel version: 2.6.21.3
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
 CONFIG_BFIN=y
 CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -33,6 +34,7 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -41,6 +43,7 @@ CONFIG_SYSVIPC=y
 # CONFIG_IKCONFIG is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -55,9 +58,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_EPOLL=y
 CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_LIMIT_PAGECACHE is not set
 CONFIG_BUDDY=y
 # CONFIG_NP2 is not set
 CONFIG_SLAB=y
@@ -127,6 +128,7 @@ CONFIG_BFIN533_STAMP=y
 # CONFIG_BFIN537_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_EZKIT is not set
+# CONFIG_BFIN561_TEPLA is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_GENERIC_BOARD is not set
 CONFIG_MEM_MT48LC64M4A2FB_7E=y
@@ -192,19 +194,6 @@ CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730
 CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700
 CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730
 
-#
-# Console UART Setup
-#
-# CONFIG_BAUD_9600 is not set
-# CONFIG_BAUD_19200 is not set
-# CONFIG_BAUD_38400 is not set
-CONFIG_BAUD_57600=y
-# CONFIG_BAUD_115200 is not set
-CONFIG_BAUD_NO_PARITY=y
-# CONFIG_BAUD_PARITY is not set
-CONFIG_BAUD_1_STOPBIT=y
-# CONFIG_BAUD_2_STOPBIT is not set
-
 #
 # Blackfin Kernel Optimizations
 #
@@ -233,6 +222,7 @@ CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
 CONFIG_RAMKERNEL=y
@@ -246,6 +236,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -318,7 +309,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
 CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
@@ -346,6 +337,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -580,6 +572,7 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -591,14 +584,12 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -733,7 +724,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF533_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BF5xx_TIMERS is not set
 # CONFIG_BF5xx_PPI is not set
@@ -742,6 +733,8 @@ CONFIG_BFIN_SPORT=y
 CONFIG_TWI_LCD=m
 CONFIG_TWI_LCD_SLAVE_ADDR=34
 # CONFIG_AD5304 is not set
+# CONFIG_BF5xx_TEA5764 is not set
+# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -778,7 +771,14 @@ CONFIG_UNIX98_PTYS=y
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 CONFIG_BLACKFIN_DPMC=y
@@ -840,12 +840,13 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Master Controller Drivers
 #
+CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BITBANG is not set
 
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_BFIN=y
+# CONFIG_SPI_AT25 is not set
 
 #
 # Dallas's 1-wire bus
@@ -861,6 +862,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
@@ -899,6 +901,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
 #
 # Multimedia devices
 #
@@ -912,15 +919,22 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 CONFIG_FB=m
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_BFIN_7171=m
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
@@ -938,7 +952,6 @@ CONFIG_ADV7393_1XMEM=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -970,6 +983,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BLACKFIN_AD1981B is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
 #
 # Open Sound System
 #
@@ -979,6 +1004,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # HID Devices
 #
 CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -1051,7 +1077,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
@@ -1073,6 +1098,10 @@ CONFIG_RTC_DRV_BFIN=y
 # DMA Devices
 #
 
+#
+# Auxiliary Display support
+#
+
 #
 # Virtualization
 #
@@ -1085,13 +1114,9 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1103,7 +1128,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1275,7 +1300,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+CONFIG_SECURITY_CAPABILITIES=m
 
 #
 # Cryptographic options
@@ -1293,4 +1318,5 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20.4
+# Linux kernel version: 2.6.21.3
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
 CONFIG_BFIN=y
 CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -33,6 +34,7 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -41,6 +43,7 @@ CONFIG_SYSVIPC=y
 # CONFIG_IKCONFIG is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -55,9 +58,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_EPOLL=y
 CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_LIMIT_PAGECACHE is not set
 CONFIG_BUDDY=y
 # CONFIG_NP2 is not set
 CONFIG_SLAB=y
@@ -127,6 +128,7 @@ CONFIG_BFIN537_STAMP=y
 # CONFIG_BFIN537_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_EZKIT is not set
+# CONFIG_BFIN561_TEPLA is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_GENERIC_BOARD is not set
 CONFIG_MEM_MT48LC32M8A2_75=y
@@ -195,19 +197,6 @@ CONFIG_MEM_SIZE=64
 CONFIG_MEM_ADD_WIDTH=10
 CONFIG_BOOT_LOAD=0x1000
 
-#
-# Console UART Setup
-#
-# CONFIG_BAUD_9600 is not set
-# CONFIG_BAUD_19200 is not set
-# CONFIG_BAUD_38400 is not set
-CONFIG_BAUD_57600=y
-# CONFIG_BAUD_115200 is not set
-CONFIG_BAUD_NO_PARITY=y
-# CONFIG_BAUD_PARITY is not set
-CONFIG_BAUD_1_STOPBIT=y
-# CONFIG_BAUD_2_STOPBIT is not set
-
 #
 # Blackfin Kernel Optimizations
 #
@@ -236,6 +225,7 @@ CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
 CONFIG_RAMKERNEL=y
@@ -249,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -321,7 +312,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
 CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
@@ -349,6 +340,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -593,6 +585,7 @@ CONFIG_MTD_NAND_IDS=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -604,14 +597,12 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -751,7 +742,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF533_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BF5xx_TIMERS is not set
 # CONFIG_BF5xx_PPI is not set
@@ -760,6 +751,8 @@ CONFIG_BFIN_SPORT=y
 CONFIG_TWI_LCD=m
 CONFIG_TWI_LCD_SLAVE_ADDR=34
 # CONFIG_AD5304 is not set
+# CONFIG_BF5xx_TEA5764 is not set
+# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -804,7 +797,14 @@ CONFIG_CAN_BLACKFIN=m
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 CONFIG_BLACKFIN_DPMC=y
@@ -868,12 +868,13 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Master Controller Drivers
 #
+CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BITBANG is not set
 
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_BFIN=y
+# CONFIG_SPI_AT25 is not set
 
 #
 # Dallas's 1-wire bus
@@ -889,6 +890,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
@@ -927,6 +929,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
 #
 # Multimedia devices
 #
@@ -940,15 +947,24 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_LCD_CLASS_DEVICE=m
 CONFIG_FB=m
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_BFIN_7171=m
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
@@ -970,11 +986,6 @@ CONFIG_LQ035_SLAVE_ADDR=0x58
 # Logo configuration
 #
 # CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
 
 #
 # Sound
@@ -1006,6 +1017,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BLACKFIN_AD1981B is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
 #
 # Open Sound System
 #
@@ -1015,6 +1038,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # HID Devices
 #
 CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -1087,7 +1111,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
@@ -1109,6 +1132,10 @@ CONFIG_RTC_DRV_BFIN=y
 # DMA Devices
 #
 
+#
+# Auxiliary Display support
+#
+
 #
 # Virtualization
 #
@@ -1121,13 +1148,9 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1139,7 +1162,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1311,7 +1334,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+CONFIG_SECURITY_CAPABILITIES=m
 
 #
 # Cryptographic options
@@ -1329,4 +1352,5 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -1,20 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19.3
+# Linux kernel version: 2.6.21.3
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
 CONFIG_BFIN=y
 CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_UCLINUX=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_IRQCHIP_DEMUX_GPIO=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -33,18 +34,21 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
+CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -54,9 +58,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_EPOLL=y
 CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_LIMIT_PAGECACHE is not set
 CONFIG_BUDDY=y
 # CONFIG_NP2 is not set
 CONFIG_SLAB=y
@@ -80,7 +82,9 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -109,7 +113,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF532 is not set
 # CONFIG_BF533 is not set
 # CONFIG_BF534 is not set
-# CONFIG_BF535 is not set
 # CONFIG_BF536 is not set
 # CONFIG_BF537 is not set
 CONFIG_BF561=y
@@ -125,6 +128,7 @@ CONFIG_BFIN_DUAL_CORE=y
 # CONFIG_BFIN537_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_BLUETECHNIX_CM is not set
 CONFIG_BFIN561_EZKIT=y
+# CONFIG_BFIN561_TEPLA is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_GENERIC_BOARD is not set
 CONFIG_MEM_MT48LC16M16A2TG_75=y
@@ -214,6 +218,7 @@ CONFIG_IRQ_WDTIMER=13
 #
 # Board customizations
 #
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Board Setup
@@ -223,19 +228,6 @@ CONFIG_MEM_SIZE=64
 CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x1000
 
-#
-# Console UART Setup
-#
-# CONFIG_BAUD_9600 is not set
-# CONFIG_BAUD_19200 is not set
-# CONFIG_BAUD_38400 is not set
-CONFIG_BAUD_57600=y
-# CONFIG_BAUD_115200 is not set
-CONFIG_BAUD_NO_PARITY=y
-# CONFIG_BAUD_PARITY is not set
-CONFIG_BAUD_1_STOPBIT=y
-# CONFIG_BAUD_2_STOPBIT is not set
-
 #
 # Blackfin Kernel Optimizations
 #
@@ -245,6 +237,7 @@ CONFIG_BAUD_1_STOPBIT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 
@@ -263,6 +256,7 @@ CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
 CONFIG_RAMKERNEL=y
@@ -276,6 +270,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -368,6 +363,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -394,6 +390,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -437,7 +434,48 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
 # CONFIG_BT is not set
 # CONFIG_IEEE80211 is not set
 
@@ -472,6 +510,7 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -528,6 +567,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -558,6 +599,7 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -569,14 +611,12 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -675,7 +715,26 @@ CONFIG_SMC91X=y
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -688,12 +747,14 @@ CONFIG_SMC91X=y
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF533_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BF5xx_TIMERS is not set
 # CONFIG_BF5xx_PPI is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_AD5304 is not set
+# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -730,16 +791,19 @@ CONFIG_UNIX98_PTYS=y
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_BLACKFIN_DPMC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -755,8 +819,19 @@ CONFIG_HW_RANDOM=y
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
 
 #
 # Dallas's 1-wire bus
@@ -770,9 +845,16 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
 #
 # Multimedia devices
 #
@@ -786,15 +868,20 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+
 #
 # USB support
 #
@@ -815,6 +902,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 # MMC/SD Card support
 #
+# CONFIG_SPI_MMC is not set
 # CONFIG_MMC is not set
 
 #
@@ -856,6 +944,14 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # DMA Devices
 #
 
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
 #
 # PBX support
 #
@@ -864,13 +960,9 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -882,7 +974,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -931,7 +1023,6 @@ CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
 # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
 CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1021,6 +1112,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1033,20 +1129,17 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 # CONFIG_DUAL_CORE_TEST_MODULE is not set
-# CONFIG_BOOTPARAM is not set
-# CONFIG_NO_KERNEL_MSG is not set
 CONFIG_CPLB_INFO=y
-# CONFIG_NO_ACCESS_CHECK is not set
+CONFIG_ACCESS_CHECK=y
 
 #
 # Security options
@@ -1054,7 +1147,7 @@ CONFIG_CPLB_INFO=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+CONFIG_SECURITY_CAPABILITIES=m
 
 #
 # Cryptographic options
@@ -1064,10 +1157,13 @@ CONFIG_SECURITY_CAPABILITIES=y
 #
 # Library routines
 #
-# CONFIG_CRC_CCITT is not set
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y

arch/blackfin/configs/PNAV-10_defconfig

@@ -1,20 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19.3
+# Linux kernel version: 2.6.21.3
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
 CONFIG_BFIN=y
 CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_UCLINUX=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_IRQCHIP_DEMUX_GPIO=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -33,14 +34,16 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -54,9 +57,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_EPOLL=y
 CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9
-# CONFIG_LIMIT_PAGECACHE is not set
 CONFIG_BUDDY=y
 # CONFIG_NP2 is not set
 CONFIG_SLAB=y
@@ -80,7 +81,9 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -109,7 +112,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF532 is not set
 # CONFIG_BF533 is not set
 # CONFIG_BF534 is not set
-# CONFIG_BF535 is not set
 # CONFIG_BF536 is not set
 CONFIG_BF537=y
 # CONFIG_BF561 is not set
@@ -125,6 +127,7 @@ CONFIG_BFIN_SINGLE_CORE=y
 # CONFIG_BFIN537_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_BLUETECHNIX_CM is not set
 # CONFIG_BFIN561_EZKIT is not set
+# CONFIG_BFIN561_TEPLA is not set
 CONFIG_PNAV10=y
 # CONFIG_GENERIC_BOARD is not set
 CONFIG_MEM_MT48LC32M8A2_75=y
@@ -183,6 +186,7 @@ CONFIG_IRQ_WATCH=13
 #
 # Board customizations
 #
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Board Setup
@@ -192,19 +196,6 @@ CONFIG_MEM_SIZE=64
 CONFIG_MEM_ADD_WIDTH=10
 CONFIG_BOOT_LOAD=0x1000
 
-#
-# Console UART Setup
-#
-# CONFIG_BAUD_9600 is not set
-# CONFIG_BAUD_19200 is not set
-# CONFIG_BAUD_38400 is not set
-# CONFIG_BAUD_57600 is not set
-CONFIG_BAUD_115200=y
-CONFIG_BAUD_NO_PARITY=y
-# CONFIG_BAUD_PARITY is not set
-CONFIG_BAUD_1_STOPBIT=y
-# CONFIG_BAUD_2_STOPBIT is not set
-
 #
 # Blackfin Kernel Optimizations
 #
@@ -214,6 +205,7 @@ CONFIG_BAUD_1_STOPBIT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 
@@ -232,6 +224,7 @@ CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_IP_CHECKSUM_L1=y
+CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
 CONFIG_RAMKERNEL=y
@@ -245,6 +238,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -338,6 +332,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -364,6 +359,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -442,6 +438,7 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -522,6 +519,7 @@ CONFIG_MTD_NAND_IDS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -533,14 +531,12 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -674,6 +670,7 @@ CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
 # CONFIG_BF53X_PFBUTTONS is not set
@@ -690,7 +687,7 @@ CONFIG_INPUT_UINPUT=y
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF533_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BF5xx_TIMERS is not set
 # CONFIG_BF5xx_PPI is not set
@@ -699,6 +696,8 @@ CONFIG_BFIN_SPORT=y
 CONFIG_TWI_LCD=m
 CONFIG_TWI_LCD_SLAVE_ADDR=34
 # CONFIG_AD5304 is not set
+# CONFIG_BF5xx_TEA5764 is not set
+# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -750,10 +749,6 @@ CONFIG_HW_RANDOM=y
 CONFIG_BLACKFIN_DPMC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -777,9 +772,9 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_BFIN_GPIO is not set
-CONFIG_I2C_BFIN_TWI=y
-CONFIG_TWICLK_KHZ=50
+# CONFIG_I2C_BLACKFIN_GPIO is not set
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
@@ -812,12 +807,13 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Master Controller Drivers
 #
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
 
 #
 # SPI Protocol Masters
 #
+# CONFIG_SPI_AT25 is not set
 
 #
 # Dallas's 1-wire bus
@@ -833,6 +829,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
@@ -857,6 +854,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -864,11 +862,17 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
 #
 # Multimedia devices
 #
@@ -882,15 +886,24 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_BFIN_7171 is not set
 # CONFIG_FB_BFIN_7393 is not set
 CONFIG_FB_BF537_LQ035=y
@@ -904,11 +917,6 @@ CONFIG_FB_BFIN_LANDSCAPE=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
 
 #
 # Sound
@@ -945,14 +953,24 @@ CONFIG_SND_PCM=m
 CONFIG_SND_BLACKFIN_AD1981B=m
 # CONFIG_SND_BFIN_AD73311 is not set
 
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
 #
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-CONFIG_OSS_OBSOLETE_DRIVER=y
+# CONFIG_OBSOLETE_OSS is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
 
+#
+# HID Devices
+#
+# CONFIG_HID is not set
+
 #
 # USB support
 #
@@ -1024,7 +1042,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
@@ -1046,6 +1063,14 @@ CONFIG_RTC_DRV_BFIN=y
 # DMA Devices
 #
 
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
 #
 # PBX support
 #
@@ -1121,7 +1146,6 @@ CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
 # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
 CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1203,6 +1227,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1215,19 +1244,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
 # CONFIG_DEBUG_HUNT_FOR_ZERO is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_BOOTPARAM is not set
-# CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_CPLB_INFO is not set
-# CONFIG_NO_ACCESS_CHECK is not set
+# CONFIG_ACCESS_CHECK is not set
 
 #
 # Security options
@@ -1245,9 +1271,12 @@ CONFIG_SECURITY_CAPABILITIES=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y

arch/blackfin/defconfig

@@ -1,1327 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20.4
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_BFIN=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_IRQCHIP_DEMUX_GPIO=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_LIMIT_PAGECACHE is not set
-CONFIG_BUDDY=y
-# CONFIG_NP2 is not set
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-CONFIG_BF537=y
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-CONFIG_BFIN537_STAMP=y
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# PORT F/G Selection
-#
-CONFIG_BF537_PORT_F=y
-# CONFIG_BF537_PORT_G is not set
-# CONFIG_BF537_PORT_H is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_TMR0=12
-CONFIG_IRQ_TMR1=12
-CONFIG_IRQ_TMR2=12
-CONFIG_IRQ_TMR3=12
-CONFIG_IRQ_TMR4=12
-CONFIG_IRQ_TMR5=12
-CONFIG_IRQ_TMR6=12
-CONFIG_IRQ_TMR7=12
-CONFIG_IRQ_PROG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Board Setup
-#
-CONFIG_CLKIN_HZ=25000000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Console UART Setup
-#
-# CONFIG_BAUD_9600 is not set
-# CONFIG_BAUD_19200 is not set
-# CONFIG_BAUD_38400 is not set
-CONFIG_BAUD_57600=y
-# CONFIG_BAUD_115200 is not set
-CONFIG_BAUD_NO_PARITY=y
-# CONFIG_BAUD_PARITY is not set
-CONFIG_BAUD_1_STOPBIT=y
-# CONFIG_BAUD_2_STOPBIT is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Timer Tick
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_BFIN_DMA_5XX=y
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
-CONFIG_L1_MAX_PIECE=16
-
-#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMBCTL Global Control
-#
-CONFIG_C_AMCKEN=y
-CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80000000
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
-CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
-CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF533_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_BFIN=y
-CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-CONFIG_CAN4LINUX=y
-
-#
-# linux embedded drivers
-#
-# CONFIG_CAN_MCF5282 is not set
-# CONFIG_CAN_UNCTWINCAN is not set
-CONFIG_CAN_BLACKFIN=m
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_BLACKFIN_GPIO is not set
-# CONFIG_I2C_BLACKFIN_TWI is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_AD5252=m
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_BFIN=y
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=m
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_BFIN_7171=m
-CONFIG_FB_BFIN_7393=m
-CONFIG_NTSC=y
-# CONFIG_PAL is not set
-# CONFIG_NTSC_640x480 is not set
-# CONFIG_PAL_640x480 is not set
-# CONFIG_NTSC_YCBCR is not set
-# CONFIG_PAL_YCBCR is not set
-CONFIG_ADV7393_1XMEM=y
-# CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_SPI_MMC is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_BFIN=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Virtualization
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -595,7 +595,7 @@ unsigned short get_dma_curr_ycount(unsigned int channel)
 }
 EXPORT_SYMBOL(get_dma_curr_ycount);
 
-void *_dma_memcpy(void *dest, const void *src, size_t size)
+static void *__dma_memcpy(void *dest, const void *src, size_t size)
 {
 	int direction;	/* 1 - address decrease, 0 - address increase */
 	int flag_align;	/* 1 - address aligned,  0 - address unaligned */
@@ -744,8 +744,8 @@ void *dma_memcpy(void *dest, const void *src, size_t size)
 	bulk = (size >> 16) << 16;
 	rest = size - bulk;
 	if (bulk)
-		_dma_memcpy(dest, src, bulk);
-	addr = _dma_memcpy(dest+bulk, src+bulk, rest);
+		__dma_memcpy(dest, src, bulk);
+	addr = __dma_memcpy(dest+bulk, src+bulk, rest);
 	return addr;
 }
 

arch/blackfin/kernel/bfin_gpio.c

@@ -138,7 +138,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT
 
 inline int check_gpio(unsigned short gpio)
 {
-	if (gpio > MAX_BLACKFIN_GPIOS)
+	if (gpio >= MAX_BLACKFIN_GPIOS)
 		return -EINVAL;
 	return 0;
 }
@@ -494,19 +494,24 @@ u32 gpio_pm_setup(void)
 			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
 			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
 			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+			gpio_bank_saved[bank].reserved = reserved_map[bank];
 
 			gpio = i;
 
 			while (mask) {
 				if (mask & 1) {
-					bfin_gpio_wakeup_type(gpio, wakeup_flags_map[gpio]);
+					reserved_map[gpio_bank(gpio)] |=
+							gpio_bit(gpio);
+					bfin_gpio_wakeup_type(gpio,
+						wakeup_flags_map[gpio]);
 					set_gpio_data(gpio, 0); /*Clear*/
 				}
 				gpio++;
 				mask >>= 1;
 			}
 
-			sic_iwr |= 1 << (sic_iwr_irqs[bank] - (IRQ_CORETMR + 1));
+			sic_iwr |= 1 <<
+				(sic_iwr_irqs[bank] - (IRQ_CORETMR + 1));
 			gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
 		}
 	}
@@ -535,6 +540,9 @@ void gpio_pm_restore(void)
 			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
 			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
 			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+
+			reserved_map[bank] = gpio_bank_saved[bank].reserved;
+
 		}
 
 		gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;

arch/blackfin/kernel/entry.S

@@ -58,10 +58,12 @@ ENTRY(_ret_from_fork)
 	RESTORE_ALL_SYS
 	p0 = reti;
 	jump (p0);
+ENDPROC(_ret_from_fork)
 
 ENTRY(_sys_fork)
 	r0 = -EINVAL;
 	rts;
+ENDPROC(_sys_fork)
 
 ENTRY(_sys_vfork)
 	r0 = sp;
@@ -72,6 +74,7 @@ ENTRY(_sys_vfork)
 	SP += 12;
 	rets = [sp++];
 	rts;
+ENDPROC(_sys_vfork)
 
 ENTRY(_sys_clone)
 	r0 = sp;
@@ -82,6 +85,7 @@ ENTRY(_sys_clone)
 	SP += 12;
 	rets = [sp++];
 	rts;
+ENDPROC(_sys_clone)
 
 ENTRY(_sys_rt_sigreturn)
 	r0 = sp;
@@ -92,3 +96,4 @@ ENTRY(_sys_rt_sigreturn)
 	SP += 12;
 	rets = [sp++];
 	rts;
+ENDPROC(_sys_rt_sigreturn)

arch/blackfin/kernel/irqchip.c

@@ -91,7 +91,7 @@ int show_interrupts(struct seq_file *p, void *v)
 }
 
 /*
- * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
+ * do_IRQ handles all hardware IRQs.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
  * own 'handler'
  */

arch/blackfin/kernel/setup.c

@@ -61,7 +61,7 @@ EXPORT_SYMBOL(memory_mtd_start);
 EXPORT_SYMBOL(mtd_size);
 #endif
 
-char command_line[COMMAND_LINE_SIZE];
+char __initdata command_line[COMMAND_LINE_SIZE];
 
 #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
 static void generate_cpl_tables(void);
@@ -90,7 +90,7 @@ void __init bf53x_cache_init(void)
 #endif
 }
 
-void bf53x_relocate_l1_mem(void)
+void __init bf53x_relocate_l1_mem(void)
 {
 	unsigned long l1_code_length;
 	unsigned long l1_data_a_length;
@@ -205,7 +205,6 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 #if defined(CONFIG_CMDLINE_BOOL)
-	memset(command_line, 0, sizeof(command_line));
 	strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
 	command_line[sizeof(command_line) - 1] = 0;
 #endif
@@ -213,7 +212,7 @@ void __init setup_arch(char **cmdline_p)
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
 	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE - 1] = 0;
+	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
 
 	/* setup memory defaults from the user config */
 	physical_mem_end = 0;
@@ -411,7 +410,7 @@ static int __init topology_init(void)
 subsys_initcall(topology_init);
 
 #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
-u16 lock_kernel_check(u32 start, u32 end)
+static u16 __init lock_kernel_check(u32 start, u32 end)
 {
 	if ((start <= (u32) _stext && end >= (u32) _end)
 	    || (start >= (u32) _stext && end <= (u32) _end))
@@ -471,6 +470,67 @@ close_cplbtab(struct cplb_tab *table)
 	return 0;
 }
 
+/* helper function */
+static void __fill_code_cplbtab(struct cplb_tab *t, int i,
+				u32 a_start, u32 a_end)
+{
+	if (cplb_data[i].psize) {
+		fill_cplbtab(t,
+				cplb_data[i].start,
+				cplb_data[i].end,
+				cplb_data[i].psize,
+				cplb_data[i].i_conf);
+	} else {
+#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+		if (i == SDRAM_KERN) {
+			fill_cplbtab(t,
+					cplb_data[i].start,
+					cplb_data[i].end,
+					SIZE_4M,
+					cplb_data[i].i_conf);
+		} else {
+#endif
+			fill_cplbtab(t,
+					cplb_data[i].start,
+					a_start,
+					SIZE_1M,
+					cplb_data[i].i_conf);
+			fill_cplbtab(t,
+					a_start,
+					a_end,
+					SIZE_4M,
+					cplb_data[i].i_conf);
+			fill_cplbtab(t, a_end,
+					cplb_data[i].end,
+					SIZE_1M,
+					cplb_data[i].i_conf);
+		}
+	}
+}
+
+static void __fill_data_cplbtab(struct cplb_tab *t, int i,
+				u32 a_start, u32 a_end)
+{
+	if (cplb_data[i].psize) {
+		fill_cplbtab(t,
+				cplb_data[i].start,
+				cplb_data[i].end,
+				cplb_data[i].psize,
+				cplb_data[i].d_conf);
+	} else {
+		fill_cplbtab(t,
+				cplb_data[i].start,
+				a_start, SIZE_1M,
+				cplb_data[i].d_conf);
+		fill_cplbtab(t, a_start,
+				a_end, SIZE_4M,
+				cplb_data[i].d_conf);
+		fill_cplbtab(t, a_end,
+				cplb_data[i].end,
+				SIZE_1M,
+				cplb_data[i].d_conf);
+	}
+}
 static void __init generate_cpl_tables(void)
 {
 
@@ -540,130 +600,78 @@ static void __init generate_cpl_tables(void)
 		cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
 
 	for (i = ZERO_P; i <= L2_MEM; i++) {
+		if (!cplb_data[i].valid)
+			continue;
 
-		if (cplb_data[i].valid) {
+		as_1m = cplb_data[i].start % SIZE_1M;
 
-			as_1m = cplb_data[i].start % SIZE_1M;
+		/*
+		 * We need to make sure all sections are properly 1M aligned
+		 * However between Kernel Memory and the Kernel mtd section,
+		 * depending on the rootfs size, there can be overlapping
+		 * memory areas.
+		 */
 
-			/* We need to make sure all sections are properly 1M aligned
-			 * However between Kernel Memory and the Kernel mtd section, depending on the
-			 * rootfs size, there can be overlapping memory areas.
-			 */
-
-			if (as_1m &&  i!=L1I_MEM && i!=L1D_MEM) {
+		if (as_1m && i != L1I_MEM && i != L1D_MEM) {
 #ifdef CONFIG_MTD_UCLINUX
-				if (i == SDRAM_RAM_MTD) {
-					if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start)
-						cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M;
-					else
-						cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M));
-				} else
+			if (i == SDRAM_RAM_MTD) {
+				if ((cplb_data[SDRAM_KERN].end + 1) >
+						cplb_data[SDRAM_RAM_MTD].start)
+					cplb_data[SDRAM_RAM_MTD].start =
+						(cplb_data[i].start &
+						 (-2*SIZE_1M)) + SIZE_1M;
+				else
+					cplb_data[SDRAM_RAM_MTD].start =
+						(cplb_data[i].start &
+						 (-2*SIZE_1M));
+			} else
 #endif
-					printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n",
-					       cplb_data[i].name, cplb_data[i].start);
-			}
+				printk(KERN_WARNING
+					"Unaligned Start of %s at 0x%X\n",
+					cplb_data[i].name, cplb_data[i].start);
+		}
 
-			as = cplb_data[i].start % SIZE_4M;
-			ae = cplb_data[i].end % SIZE_4M;
-
-			if (as)
-				a_start = cplb_data[i].start + (SIZE_4M - (as));
-			else
-				a_start = cplb_data[i].start;
-
-			a_end = cplb_data[i].end - ae;
-
-			for (j = INITIAL_T; j <= SWITCH_T; j++) {
-
-				switch (j) {
-				case INITIAL_T:
-					if (cplb_data[i].attr & INITIAL_T) {
-						t_i = &cplb.init_i;
-						t_d = &cplb.init_d;
-						process = 1;
-					} else
-						process = 0;
-					break;
-				case SWITCH_T:
-					if (cplb_data[i].attr & SWITCH_T) {
-						t_i = &cplb.switch_i;
-						t_d = &cplb.switch_d;
-						process = 1;
-					} else
-						process = 0;
-					break;
-				default:
-						process = 0;
-					break;
-				}
+		as = cplb_data[i].start % SIZE_4M;
+		ae = cplb_data[i].end % SIZE_4M;
 
-	if (process) {
-				if (cplb_data[i].attr & I_CPLB) {
-
-					if (cplb_data[i].psize) {
-						fill_cplbtab(t_i,
-							     cplb_data[i].start,
-							     cplb_data[i].end,
-							     cplb_data[i].psize,
-							     cplb_data[i].i_conf);
-					} else {
-						/*icplb_table */
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
-						if (i == SDRAM_KERN) {
-							fill_cplbtab(t_i,
-								     cplb_data[i].start,
-								     cplb_data[i].end,
-								     SIZE_4M,
-								     cplb_data[i].i_conf);
-						} else
-#endif
-						{
-							fill_cplbtab(t_i,
-								     cplb_data[i].start,
-								     a_start,
-								     SIZE_1M,
-								     cplb_data[i].i_conf);
-							fill_cplbtab(t_i,
-								     a_start,
-								     a_end,
-								     SIZE_4M,
-								     cplb_data[i].i_conf);
-							fill_cplbtab(t_i, a_end,
-								     cplb_data[i].end,
-								     SIZE_1M,
-								     cplb_data[i].i_conf);
-						}
-					}
+		if (as)
+			a_start = cplb_data[i].start + (SIZE_4M - (as));
+		else
+			a_start = cplb_data[i].start;
 
-				}
-				if (cplb_data[i].attr & D_CPLB) {
-
-					if (cplb_data[i].psize) {
-						fill_cplbtab(t_d,
-							     cplb_data[i].start,
-							     cplb_data[i].end,
-							     cplb_data[i].psize,
-							     cplb_data[i].d_conf);
-					} else {
-/*dcplb_table*/
-						fill_cplbtab(t_d,
-							     cplb_data[i].start,
-							     a_start, SIZE_1M,
-							     cplb_data[i].d_conf);
-						fill_cplbtab(t_d, a_start,
-							     a_end, SIZE_4M,
-							     cplb_data[i].d_conf);
-						fill_cplbtab(t_d, a_end,
-							     cplb_data[i].end,
-							     SIZE_1M,
-							     cplb_data[i].d_conf);
+		a_end = cplb_data[i].end - ae;
 
-					}
+		for (j = INITIAL_T; j <= SWITCH_T; j++) {
 
-				}
-			}
+			switch (j) {
+			case INITIAL_T:
+				if (cplb_data[i].attr & INITIAL_T) {
+					t_i = &cplb.init_i;
+					t_d = &cplb.init_d;
+					process = 1;
+				} else
+					process = 0;
+				break;
+			case SWITCH_T:
+				if (cplb_data[i].attr & SWITCH_T) {
+					t_i = &cplb.switch_i;
+					t_d = &cplb.switch_d;
+					process = 1;
+				} else
+					process = 0;
+				break;
+			default:
+					process = 0;
+				break;
 			}
 
+			if (!process)
+				continue;
+			if (cplb_data[i].attr & I_CPLB)
+				__fill_code_cplbtab(t_i, i, a_start, a_end);
+
+			if (cplb_data[i].attr & D_CPLB)
+				__fill_data_cplbtab(t_d, i, a_start, a_end);
 		}
 	}
 
@@ -681,7 +689,7 @@ static void __init generate_cpl_tables(void)
 
 #endif
 
-static inline u_long get_vco(void)
+static u_long get_vco(void)
 {
 	u_long msel;
 	u_long vco;
@@ -889,8 +897,8 @@ struct seq_operations cpuinfo_op = {
 	.show = show_cpuinfo,
 };
 
-void cmdline_init(unsigned long r0)
+void __init cmdline_init(const char *r0)
 {
 	if (r0)
-		strncpy(command_line, (char *)r0, COMMAND_LINE_SIZE);
+		strncpy(command_line, r0, COMMAND_LINE_SIZE);
 }

arch/blackfin/kernel/traps.c

@@ -557,7 +557,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
 				break;
 #ifndef CONFIG_DEBUG_HWERR
 			/* If one of the last few instructions was a STI
-			 * it is likily that the error occured awhile ago
+			 * it is likely that the error occured awhile ago
 			 * and we just noticed
 			 */
 			if (x >= 0x0040 && x <= 0x0047 && i <= 0)

arch/blackfin/kernel/vmlinux.lds.S

@@ -7,7 +7,7 @@
  * Description:  Master linker script for blackfin architecture
  *
  * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2007 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -32,97 +32,54 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/mem_map.h>
 
-
 OUTPUT_FORMAT("elf32-bfin")
 ENTRY(__start)
 _jiffies = _jiffies_64;
 
-MEMORY
-{
-	ram         : ORIGIN = CONFIG_BOOT_LOAD, LENGTH = (CONFIG_MEM_SIZE * 1024 * 1024) - (CONFIG_BOOT_LOAD)
-	l1_data_a   : ORIGIN = L1_DATA_A_START,  LENGTH = L1_DATA_A_LENGTH
-	l1_data_b   : ORIGIN = L1_DATA_B_START,  LENGTH = L1_DATA_B_LENGTH
-	l1_code     : ORIGIN = L1_CODE_START,    LENGTH = L1_CODE_LENGTH
-	l1_scratch  : ORIGIN = L1_SCRATCH_START, LENGTH = L1_SCRATCH_LENGTH
-}
-
 SECTIONS
 {
 	. = CONFIG_BOOT_LOAD;
-
 	.text :
 	{
-		 _text = .;
-		 __stext = .;
+		__text = .;
+		_text = .;
+		__stext = .;
 		TEXT_TEXT
 		SCHED_TEXT
+		LOCK_TEXT
 		*(.text.lock)
+		*(.fixup)
+
 		. = ALIGN(16);
-		  ___start___ex_table = .;
+		___start___ex_table = .;
 		*(__ex_table)
-		 ___stop___ex_table = .;
-
-		*($code)
-		*(.rodata)
-		*(.rodata.*)
-		*(__vermagic)		/* Kernel version magic */
-		*(.rodata1)
-		*(.fixup)
-		*(.spinlock.text)
+		___stop___ex_table = .;
 
-		/* Kernel symbol table: Normal symbols */
 		. = ALIGN(4);
-		___start___ksymtab = .;
-		*(__ksymtab)
-		___stop___ksymtab = .;
-
-		/* Kernel symbol table: GPL-only symbols */
-		___start___ksymtab_gpl = .;
-		*(__ksymtab_gpl)
-		___stop___ksymtab_gpl = .;
-
-		/* Kernel symbol table: Normal unused symbols */		\
-		___start___ksymtab_unused = .;
-		*(__ksymtab_unused)
-		___stop___ksymtab_unused = .;
-
-		/* Kernel symbol table: GPL-only unused symbols */
-		___start___ksymtab_unused_gpl = .;
-		*(__ksymtab_unused_gpl)
-		___stop___ksymtab_unused_gpl = .;
-
-
-		/* Kernel symbol table: GPL-future symbols */
-		___start___ksymtab_gpl_future = .;
-		*(__ksymtab_gpl_future)
-		___stop___ksymtab_gpl_future = .;
-
-		/* Kernel symbol table: Normal symbols */
-		___start___kcrctab = .;
-		*(__kcrctab)
-		___stop___kcrctab = .;
-
-		/* Kernel symbol table: GPL-only symbols */
-		___start___kcrctab_gpl = .;
-		*(__kcrctab_gpl)
-		___stop___kcrctab_gpl = .;
-
-		/* Kernel symbol table: GPL-future symbols */
-		___start___kcrctab_gpl_future = .;
-		*(__kcrctab_gpl_future)
-		___stop___kcrctab_gpl_future = .;
-
-		/* Kernel symbol table: strings */
-		*(__ksymtab_strings)
-
-		 . = ALIGN(4);
 		__etext = .;
-	} > ram
+	}
+
+	RODATA
+
+	.data :
+	{
+		__sdata = .;
+		. = ALIGN(0x2000);
+		*(.data.init_task)
+		DATA_DATA
+		CONSTRUCTORS
+
+		. = ALIGN(32);
+		*(.data.cacheline_aligned)
+
+		. = ALIGN(0x2000);
+		__edata = .;
+	}
 
+	___init_begin = .;
 	.init :
 	{
 		. = ALIGN(4096);
-		___init_begin = .;
 		__sinittext = .;
 		*(.init.text)
 		__einittext = .;
@@ -148,39 +105,39 @@ SECTIONS
 		*(.init.ramfs)
 		___initramfs_end = .;
 		. = ALIGN(4);
-		___init_end = .;
-	} > ram
+	}
 
-	 __l1_lma_start = .;
+	__l1_lma_start = .;
 
-	.text_l1 :
+	.text_l1 L1_CODE_START : AT(LOADADDR(.init) + SIZEOF(.init))
 	{
 		. = ALIGN(4);
-		 __stext_l1 = .;
+		__stext_l1 = .;
 		*(.l1.text)
 
 		. = ALIGN(4);
-		 __etext_l1 = .;
-	} > l1_code AT > ram
+		__etext_l1 = .;
+	}
 
-	.data_l1 :
+	.data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
 	{
 		. = ALIGN(4);
-		 __sdata_l1 = .;
+		__sdata_l1 = .;
 		*(.l1.data)
-		 __edata_l1 = .;
+		__edata_l1 = .;
 
 		. = ALIGN(4);
-		 __sbss_l1 = .;
+		__sbss_l1 = .;
 		*(.l1.bss)
 
 		. = ALIGN(32);
 		*(.data_l1.cacheline_aligned)
 
 		. = ALIGN(4);
-		 __ebss_l1 = .;
-	} > l1_data_a AT > ram
-	.data_b_l1 :
+		__ebss_l1 = .;
+	}
+
+	.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
 	{
 		. = ALIGN(4);
 		__sdata_b_l1 = .;
@@ -193,36 +150,25 @@ SECTIONS
 
 		. = ALIGN(4);
 		__ebss_b_l1 = .;
-	} > l1_data_b AT > ram
+	}
 
-	.data :
-	{
-		 __sdata = .;
-		. = ALIGN(0x2000);
-		*(.data.init_task)
-		DATA_DATA
+	___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
 
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
-
-		. = ALIGN(0x2000);
-		__edata = .;
-	} > ram
-
-	/DISCARD/ : {			/* Exit code and data*/
-		*(.exit.text)
-		*(.exit.data)
-		*(.exitcall.exit)
-	} > ram
-
-	.bss :
+	.bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
 	{
 		. = ALIGN(4);
-		 ___bss_start = .;
+		___bss_start = .;
 		*(.bss)
 		*(COMMON)
 		. = ALIGN(4);
-		 ___bss_stop = .;
-		 __end = .	;
-	} > ram
+		___bss_stop = .;
+		__end = .;
+	}
+
+	/DISCARD/ :
+	{
+		*(.exit.text)
+		*(.exit.data)
+		*(.exitcall.exit)
+	}
 }

arch/blackfin/lib/divsi3.S

@@ -44,6 +44,7 @@
  */
 
 .global   ___divsi3;
+.type ___divsi3, STT_FUNC;
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
 .section .l1.text
@@ -214,3 +215,5 @@ ___divsi3 :
 .Lret_zero:
   R0 = 0;
   RTS;
+
+.size ___divsi3, .-___divsi3

arch/blackfin/lib/ins.S

@@ -46,7 +46,7 @@ ENTRY(_insl)
 .Llong_loop_e: 	NOP;
 	sti R3;
 	RTS;
-
+ENDPROC(_insl)
 
 ENTRY(_insw)
 	P0 = R0;	/* P0 = port */
@@ -61,6 +61,7 @@ ENTRY(_insw)
 .Lword_loop_e: 	NOP;
 	sti R3;
 	RTS;
+ENDPROC(_insw)
 
 ENTRY(_insb)
 	P0 = R0;	/* P0 = port */
@@ -75,3 +76,4 @@ ENTRY(_insb)
 .Lbyte_loop_e:  NOP;
 	sti R3;
 	RTS;
+ENDPROC(_insb)

arch/blackfin/lib/memchr.S

@@ -67,4 +67,4 @@ ENTRY(_memchr)
 	R0 += -1;
 	RTS;
 
-.size _memchr,.-_memchr
+ENDPROC(_memchr)

arch/blackfin/lib/memcmp.S

@@ -107,4 +107,4 @@ ENTRY(_memcmp)
 	P3 = I1;
 	RTS;
 
-.size _memcmp,.-_memcmp
+ENDPROC(_memcmp)

arch/blackfin/lib/memcpy.S

@@ -140,3 +140,5 @@ ENTRY(_memcpy)
 	B[P0--] = R1;
 
 	RTS;
+
+ENDPROC(_memcpy)

arch/blackfin/lib/memmove.S

@@ -100,4 +100,4 @@ ENTRY(_memmove)
 	P3 = I1;
 	RTS;
 
-.size _memmove,.-_memmove
+ENDPROC(_memmove)

arch/blackfin/lib/memset.S

@@ -106,4 +106,4 @@ ENTRY(_memset)
 	B[P0++] = R1;
 	JUMP .Laligned;
 
-.size _memset,.-_memset
+ENDPROC(_memset)

arch/blackfin/lib/modsi3.S

@@ -77,3 +77,5 @@ ___modsi3:
 	R0 = 0;
 .LRETURN_R0:
 	RTS;
+
+.size ___modsi3, .-___modsi3

arch/blackfin/lib/outs.S

@@ -40,6 +40,7 @@ ENTRY(_outsl)
 .Llong_loop_s: R0 = [P1++];
 .Llong_loop_e: [P0] = R0;
 	RTS;
+ENDPROC(_outsl)
 
 ENTRY(_outsw)
 	P0 = R0;	/* P0 = port */
@@ -50,6 +51,7 @@ ENTRY(_outsw)
 .Lword_loop_s: R0 = W[P1++];
 .Lword_loop_e: W[P0] = R0;
 	RTS;
+ENDPROC(_outsw)
 
 ENTRY(_outsb)
 	P0 = R0;	/* P0 = port */
@@ -60,3 +62,4 @@ ENTRY(_outsb)
 .Lbyte_loop_s: R0 = B[P1++];
 .Lbyte_loop_e: B[P0] = R0;
 	RTS;
+ENDPROC(_outsb)

arch/blackfin/lib/smulsi3_highpart.S

@@ -28,3 +28,5 @@ ___smulsi3_highpart:
 
 	R0 = R0 + R1;
 	RTS;
+
+.size ___smulsi3_highpart, .-___smulsi3_highpart

arch/blackfin/lib/udivsi3.S

@@ -296,3 +296,5 @@ ENTRY(___udivsi3)
   R1 = R0 - R3;
   IF CC R0 = R1;
   RTS;
+
+ENDPROC(___udivsi3)

arch/blackfin/lib/umodsi3.S

@@ -34,7 +34,9 @@
 #endif
 
 .extern ___udivsi3;
+.type ___udivsi3, STT_FUNC;
 .globl	___umodsi3
+.type ___umodsi3, STT_FUNC;
 ___umodsi3:
 
 	CC=R0==0;
@@ -64,3 +66,5 @@ ___umodsi3:
 	R0 = 0;
 .LRETURN_R0:
 	RTS;
+
+.size ___umodsi3, .-___umodsi3

arch/blackfin/lib/umulsi3_highpart.S

@@ -21,3 +21,5 @@ ___umulsi3_highpart:
 	R1 = PACK(R1.l,R0.h);
 	R0 = R1 + R2;
 	RTS;
+
+.size ___umulsi3_highpart, .-___umulsi3_highpart

arch/blackfin/mach-bf533/boards/cm_bf533.c

@@ -1,7 +1,7 @@
 /*
  * File:         arch/blackfin/mach-bf533/boards/cm_bf533.c
  * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au> Copright 2005
+ * Author:       Aidan Williams <aidan@nicta.com.au> Copyright 2005
  *
  * Created:      2005
  * Description:  Board description file

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -1,6 +1,6 @@
 /*
  * File:         arch/blackfin/mach-bf533/ezkit.c
- * Based on:     Orginal Work
+ * Based on:     Original Work
  * Author:       Aidan Williams <aidan@nicta.com.au>
  *
  * Created:      2005

arch/blackfin/mach-bf533/head.S

@@ -28,6 +28,7 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/blackfin.h>
 #if CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach/mem_init.h>
@@ -45,19 +46,19 @@
 
 #define INITIAL_STACK	0xFFB01000
 
-.text
+__INIT
 
 ENTRY(__start)
-ENTRY(__stext)
 	/* R0: argument of command line string, passed from uboot, save it */
 	R7 = R0;
-	/* Set the SYSCFG register */
+	/* Set the SYSCFG register:
+	 * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
+	 */
 	R0 = 0x36;
-	/*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
 	SYSCFG = R0;
 	R0 = 0;
 
-	/*Clear Out All the data and pointer  Registers*/
+	/* Clear Out All the data and pointer Registers */
 	R1 = R0;
 	R2 = R0;
 	R3 = R0;
@@ -79,7 +80,7 @@ ENTRY(__stext)
 	L2 = r0;
 	L3 = r0;
 
-	/* Clear Out All the DAG Registers*/
+	/* Clear Out All the DAG Registers */
 	B0 = r0;
 	B1 = r0;
 	B2 = r0;
@@ -265,6 +266,7 @@ ENTRY(__stext)
 
 .LWAIT_HERE:
 	jump .LWAIT_HERE;
+ENDPROC(__start)
 
 ENTRY(_real_start)
 	[ -- sp ] = reti;
@@ -303,7 +305,7 @@ ENTRY(_real_start)
 .L_clear_zero:
 	W[p1++] = r0;
 
-/* pass the uboot arguments to the global value command line */
+	/* pass the uboot arguments to the global value command line */
 	R0 = R7;
 	call _cmdline_init;
 
@@ -322,7 +324,7 @@ ENTRY(_real_start)
 	[p1] = r1;
 
 	/*
-	 *  load the current thread pointer and stack
+	 * load the current thread pointer and stack
 	 */
 	r1.l = _init_thread_union;
 	r1.h = _init_thread_union;
@@ -333,9 +335,10 @@ ENTRY(_real_start)
 	sp = r1;
 	usp = sp;
 	fp = sp;
-	call _start_kernel;
-.L_exit:
-	jump.s	.L_exit;
+	jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
 
 .section .l1.text
 #if CONFIG_BFIN_KERNEL_CLOCK
@@ -439,12 +442,13 @@ ENTRY(_start_dma_code)
 
 	p0.h = hi(SIC_IWR);
 	p0.l = lo(SIC_IWR);
-	r0.l = lo(IWR_ENABLE_ALL)
-	r0.h = hi(IWR_ENABLE_ALL)
+	r0.l = lo(IWR_ENABLE_ALL);
+	r0.h = hi(IWR_ENABLE_ALL);
 	[p0] = r0;
 	SSYNC;
 
 	RTS;
+ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
 
 ENTRY(_bfin_reset)

arch/blackfin/mach-bf533/ints-priority.c

@@ -4,7 +4,7 @@
  * Author:       Michael Hennerich
  *
  * Created:      ?
- * Description:  Set up the interupt priorities
+ * Description:  Set up the interrupt priorities
  *
  * Modified:
  *               Copyright 2004-2006 Analog Devices Inc.

arch/blackfin/mach-bf537/boards/generic_board.c

@@ -55,7 +55,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
 		.end = 0x20312000,
 		.flags = IORESOURCE_MEM,
 	},{
-		.start = 0x20311000, /* Attribute Memeory */
+		.start = 0x20311000, /* Attribute Memory */
 		.end = 0x20311FFF,
 		.flags = IORESOURCE_MEM,
 	},{

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -59,7 +59,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
 		.end = 0x20312000,
 		.flags = IORESOURCE_MEM,
 	},{
-		.start = 0x20311000, /* Attribute Memeory */
+		.start = 0x20311000, /* Attribute Memory */
 		.end = 0x20311FFF,
 		.flags = IORESOURCE_MEM,
 	},{

arch/blackfin/mach-bf537/boards/stamp.c

@@ -108,7 +108,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
 		.end = 0x20312000,
 		.flags = IORESOURCE_MEM,
 	},{
-		.start = 0x20311000, /* Attribute Memeory */
+		.start = 0x20311000, /* Attribute Memory */
 		.end = 0x20311FFF,
 		.flags = IORESOURCE_MEM,
 	},{

arch/blackfin/mach-bf537/head.S

@@ -28,6 +28,7 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/blackfin.h>
 #if CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach/mem_init.h>
@@ -40,20 +41,21 @@
 .extern ___bss_start
 .extern _bf53x_relocate_l1_mem
 
-#define INITIAL_STACK   0xFFB01000
+#define INITIAL_STACK	0xFFB01000
 
-.text
+__INIT
 
 ENTRY(__start)
-ENTRY(__stext)
 	/* R0: argument of command line string, passed from uboot, save it */
 	R7 = R0;
-	/* Set the SYSCFG register */
+	/* Set the SYSCFG register:
+	 * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
+	 */
 	R0 = 0x36;
-	SYSCFG = R0;   /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+	SYSCFG = R0;
 	R0 = 0;
 
-	/* Clear Out All the data and pointer  Registers*/
+	/* Clear Out All the data and pointer Registers */
 	R1 = R0;
 	R2 = R0;
 	R3 = R0;
@@ -75,7 +77,7 @@ ENTRY(__stext)
 	L2 = r0;
 	L3 = r0;
 
-	/* Clear Out All the DAG Registers*/
+	/* Clear Out All the DAG Registers */
 	B0 = r0;
 	B1 = r0;
 	B2 = r0;
@@ -191,7 +193,7 @@ ENTRY(__stext)
 
 	p0.h = hi(UART_DLL);
 	p0.l = lo(UART_DLL);
-	r0 = 0x00(Z);
+	r0 = 0x0(Z);
 	w[p0] = r0.L;
 	ssync;
 
@@ -218,6 +220,7 @@ ENTRY(__stext)
 #if CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
+
 	/* Code for initializing Async memory banks */
 
 	p2.h = hi(EBIU_AMBCTL1);
@@ -272,6 +275,7 @@ ENTRY(__stext)
 
 .LWAIT_HERE:
 	jump .LWAIT_HERE;
+ENDPROC(__start)
 
 ENTRY(_real_start)
 	[ -- sp ] = reti;
@@ -291,7 +295,7 @@ ENTRY(_real_start)
 	p2.h = ___bss_stop;
 	r0 = 0;
 	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
 .L_clear_bss:
 	B[p1++] = r0;
 
@@ -306,7 +310,7 @@ ENTRY(_real_start)
 	r0 = r0 >> 1;
 	p2 = r0;
 	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
 .L_clear_zero:
 	W[p1++] = r0;
 
@@ -328,9 +332,8 @@ ENTRY(_real_start)
 	r1 = p3;
 	[p1] = r1;
 
-
 	/*
-	 *  load the current thread pointer and stack
+	 * load the current thread pointer and stack
 	 */
 	r1.l = _init_thread_union;
 	r1.h = _init_thread_union;
@@ -341,9 +344,10 @@ ENTRY(_real_start)
 	sp = r1;
 	usp = sp;
 	fp = sp;
-	call _start_kernel;
-.L_exit:
-	jump.s	.L_exit;
+	jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
 
 .section .l1.text
 #if CONFIG_BFIN_KERNEL_CLOCK
@@ -462,6 +466,7 @@ ENTRY(_start_dma_code)
 	SSYNC;
 
 	RTS;
+ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
 
 ENTRY(_bfin_reset)

arch/blackfin/mach-bf537/ints-priority.c

@@ -4,7 +4,7 @@
  * Author:       Michael Hennerich
  *
  * Created:
- * Description:  Set up the interupt priorities
+ * Description:  Set up the interrupt priorities
  *
  * Modified:
  *               Copyright 2004-2006 Analog Devices Inc.

arch/blackfin/mach-bf561/boards/cm_bf561.c

@@ -1,7 +1,7 @@
 /*
  * File:         arch/blackfin/mach-bf533/boards/cm_bf561.c
  * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au> Copright 2005
+ * Author:       Aidan Williams <aidan@nicta.com.au> Copyright 2005
  *
  * Created:      2006
  * Description:  Board description file
@@ -43,7 +43,7 @@
 char *bfin_board_name = "Bluetechnix CM BF561";
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI perpherals info goes here */
+/* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {

arch/blackfin/mach-bf561/head.S

@@ -28,6 +28,7 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/blackfin.h>
 #if CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach/mem_init.h>
@@ -42,18 +43,19 @@
 
 #define INITIAL_STACK	0xFFB01000
 
-.text
+__INIT
 
 ENTRY(__start)
-ENTRY(__stext)
-	/*  R0: argument of command line string, passed from uboot, save it */
+	/* R0: argument of command line string, passed from uboot, save it */
 	R7 = R0;
-	/* Set the SYSCFG register */
+	/* Set the SYSCFG register:
+	 * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
+	 */
 	R0 = 0x36;
-	SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+	SYSCFG = R0;
 	R0 = 0;
 
-	/*Clear Out All the data and pointer  Registers*/
+	/* Clear Out All the data and pointer Registers */
 	R1 = R0;
 	R2 = R0;
 	R3 = R0;
@@ -75,7 +77,7 @@ ENTRY(__stext)
 	L2 = r0;
 	L3 = r0;
 
-	/* Clear Out All the DAG Registers*/
+	/* Clear Out All the DAG Registers */
 	B0 = r0;
 	B1 = r0;
 	B2 = r0;
@@ -219,6 +221,7 @@ ENTRY(__stext)
 
 .LWAIT_HERE:
 	jump .LWAIT_HERE;
+ENDPROC(__start)
 
 ENTRY(_real_start)
 	[ -- sp ] = reti;
@@ -238,7 +241,7 @@ ENTRY(_real_start)
 	p2.h = ___bss_stop;
 	r0 = 0;
 	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
 .L_clear_bss:
 	B[p1++] = r0;
 
@@ -253,11 +256,11 @@ ENTRY(_real_start)
 	r0 = r0 >> 1;
 	p2 = r0;
 	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
 .L_clear_zero:
 	W[p1++] = r0;
 
-/* pass the uboot arguments to the global value command line */
+	/* pass the uboot arguments to the global value command line */
 	R0 = R7;
 	call _cmdline_init;
 
@@ -287,9 +290,10 @@ ENTRY(_real_start)
 	sp = r1;
 	usp = sp;
 	fp = sp;
-	call _start_kernel;
-.L_exit:
-	jump.s	.L_exit;
+	jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
 
 .section .l1.text
 #if CONFIG_BFIN_KERNEL_CLOCK
@@ -350,7 +354,7 @@ ENTRY(_start_dma_code)
 	if ! CC jump .Lcheck_again;
 
 	/* Configure SCLK & CCLK Dividers */
-	   	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
 	p0.h = hi(PLL_DIV);
 	p0.l = lo(PLL_DIV);
 	w[p0] = r0.l;
@@ -391,6 +395,7 @@ ENTRY(_start_dma_code)
 	SSYNC;
 
 	RTS;
+ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
 
 ENTRY(_bfin_reset)

arch/blackfin/mach-bf561/ints-priority.c

@@ -4,7 +4,7 @@
  * Author:       Michael Hennerich
  *
  * Created:
- * Description:  Set up the interupt priorities
+ * Description:  Set up the interrupt priorities
  *
  * Modified:
  *               Copyright 2004-2006 Analog Devices Inc.

arch/blackfin/mach-common/cache.S

@@ -70,6 +70,7 @@ ENTRY(_cache_invalidate)
 .Lno_dcache_b:
 	R7 = [SP++];
 	RTS;
+ENDPROC(_cache_invalidate)
 
 /* Invalidate the Entire Instruction cache by
  * disabling IMC bit
@@ -106,6 +107,8 @@ ENTRY(_invalidate_entire_icache)
 
 	( R7:5) = [SP++];
 	RTS;
+ENDPROC(_invalidate_entire_icache)
+ENDPROC(_icache_invalidate)
 
 /*
  * blackfin_cache_flush_range(start, end)
@@ -129,6 +132,7 @@ ENTRY(_blackfin_icache_flush_range)
 	IFLUSH [P0];
 	SSYNC;
 	RTS;
+ENDPROC(_blackfin_icache_flush_range)
 
 /*
  * blackfin_icache_dcache_flush_range(start, end)
@@ -155,6 +159,7 @@ ENTRY(_blackfin_icache_dcache_flush_range)
 	FLUSH [P0];
 	SSYNC;
 	RTS;
+ENDPROC(_blackfin_icache_dcache_flush_range)
 
 /* Throw away all D-cached data in specified region without any obligation to
  * write them back. However, we must clean the D-cached entries around the
@@ -183,6 +188,7 @@ ENTRY(_blackfin_dcache_invalidate_range)
 	FLUSHINV[P0];
 	SSYNC;
 	RTS;
+ENDPROC(_blackfin_dcache_invalidate_range)
 
 /* Invalidate the Entire Data cache by
  * clearing DMC[1:0] bits
@@ -221,6 +227,8 @@ ENTRY(_dcache_invalidate)
 
 	( R7:6) = [SP++];
 	RTS;
+ENDPROC(_dcache_invalidate)
+ENDPROC(_invalidate_entire_dcache)
 
 ENTRY(_blackfin_dcache_flush_range)
 	R2 = -L1_CACHE_BYTES;
@@ -241,6 +249,7 @@ ENTRY(_blackfin_dcache_flush_range)
 	FLUSH[P0];
 	SSYNC;
 	RTS;
+ENDPROC(_blackfin_dcache_flush_range)
 
 ENTRY(_blackfin_dflush_page)
 	P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT);
@@ -251,3 +260,4 @@ ENTRY(_blackfin_dflush_page)
 .Lfl1:	FLUSH [P0++];
 	SSYNC;
 	RTS;
+ENDPROC(_blackfin_dflush_page)

arch/blackfin/mach-common/cacheinit.S

@@ -86,6 +86,8 @@ ENTRY(_bfin_icache_init)
 	SSYNC;
 	STI R2;
 	RTS;
+
+ENDPROC(_bfin_icache_init)
 #endif
 
 #if defined(CONFIG_BLKFIN_DCACHE)
@@ -134,4 +136,6 @@ ENTRY(_bfin_dcache_init)
 	SSYNC;
 	STI R2;
 	RTS;
+
+ENDPROC(_bfin_dcache_init)
 #endif

arch/blackfin/mach-common/cplbhdlr.S

@@ -42,8 +42,6 @@
 
 .align 2
 
-.global __cplb_hdr;
-.type __cplb_hdr, STT_FUNC;
 ENTRY(__cplb_hdr)
 	R2 = SEQSTAT;
 
@@ -128,3 +126,5 @@ ENTRY(__cplb_hdr)
 	call _panic_cplb_error;
 	SP += 12;
 	JUMP _handle_bad_cplb;
+
+ENDPROC(__cplb_hdr)

arch/blackfin/mach-common/cplbinfo.c

@@ -82,7 +82,7 @@ static char *cplb_print_entry(char *buf, int type)
 	int entry = 0, used_cplb = 0;
 
 	if (type == CPLB_I) {
-		buf += sprintf(buf, "Instrction CPLB entry:\n");
+		buf += sprintf(buf, "Instruction CPLB entry:\n");
 		p_addr = ipdt_table;
 		p_data = ipdt_table + 1;
 		p_icount = ipdt_swapcount_table;

arch/blackfin/mach-common/cplbmgr.S

@@ -592,6 +592,7 @@ ENTRY(_cplb_mgr)
 	( R7:4,P5:3 ) = [SP++];
 	R0 = CPLB_RELOADED;
 	RTS;
+ENDPROC(_cplb_mgr)
 
 .data
 .align 4;

arch/blackfin/mach-common/entry.S

@@ -103,6 +103,7 @@ ENTRY(_ex_dcplb)
 	if !cc jump _return_from_exception;
 	/* fall through */
 #endif
+ENDPROC(_ex_dcplb)
 
 ENTRY(_ex_icplb)
 	(R7:6,P5:4) = [sp++];
@@ -113,6 +114,7 @@ ENTRY(_ex_icplb)
 	RESTORE_ALL_SYS
 	SP = RETN;
 	rtx;
+ENDPROC(_ex_icplb)
 
 ENTRY(_ex_spinlock)
 	/* Transform this into a syscall - twiddle the syscall vector.  */
@@ -123,6 +125,7 @@ ENTRY(_ex_spinlock)
 	[p5] = r7;
 	csync;
 	/* Fall through.  */
+ENDPROC(_ex_spinlock)
 
 ENTRY(_ex_syscall)
 	DEBUG_START_HWTRACE
@@ -131,6 +134,7 @@ ENTRY(_ex_syscall)
 	raise 15;		/* invoked by TRAP #0, for sys call */
 	sp = retn;
 	rtx
+ENDPROC(_ex_syscall)
 
 ENTRY(_spinlock_bh)
 	SAVE_ALL_SYS
@@ -150,12 +154,14 @@ ENTRY(_spinlock_bh)
 	[SP + PT_R0] = R0;
 	RESTORE_ALL_SYS
 	rti;
+ENDPROC(_spinlock_bh)
 
 ENTRY(_ex_soft_bp)
 	r7 = retx;
 	r7 += -2;
 	retx = r7;
 	jump.s _ex_trap_c;
+ENDPROC(_ex_soft_bp)
 
 ENTRY(_ex_single_step)
 	r7 = retx;
@@ -191,6 +197,7 @@ _return_from_exception:
 	ASTAT = [sp++];
 	sp = retn;
 	rtx;
+ENDPROC(_ex_soft_bp)
 
 ENTRY(_handle_bad_cplb)
 	/* To get here, we just tried and failed to change a CPLB
@@ -250,6 +257,7 @@ ENTRY(_ex_trap_c)
 	SP = RETN;
 	raise 5;
 	rtx;
+ENDPROC(_ex_trap_c)
 
 ENTRY(_exception_to_level5)
 	SAVE_ALL_SYS
@@ -314,6 +322,7 @@ ENTRY(_exception_to_level5)
 	call _ret_from_exception;
 	RESTORE_ALL_SYS
 	rti;
+ENDPROC(_exception_to_level5)
 
 ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	/* Since the kernel stack can be anywhere, it's not guaranteed to be
@@ -342,6 +351,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	r7 = -ENOSYS; 		/* signextending enough */
 	[sp + PT_R0] = r7;	/* return value from system call */
 	jump .Lsyscall_really_exit;
+ENDPROC(_trap)
 
 ENTRY(_kernel_execve)
 	link SIZEOF_PTREGS;
@@ -396,6 +406,7 @@ ENTRY(_kernel_execve)
 1:
 	unlink;
 	rts;
+ENDPROC(_kernel_execve)
 
 ENTRY(_system_call)
 	/* Store IPEND */
@@ -503,6 +514,7 @@ ENTRY(_system_call)
 	r5 = [sp + PT_RESERVED];
 	rets = r5;
 	rts;
+ENDPROC(_system_call)
 
 _sys_trace:
 	call _syscall_trace;
@@ -531,6 +543,7 @@ _sys_trace:
 
 	call _syscall_trace;
 	jump .Lresume_userspace;
+ENDPROC(_sys_trace)
 
 ENTRY(_resume)
 	/*
@@ -580,6 +593,7 @@ _new_old_task:
 	 * in "new" task.
 	 */
 	rts;
+ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
 	p2.l = lo(IPEND);
@@ -638,6 +652,7 @@ ENTRY(_ret_from_exception)
 	syscfg = r0;
 5:
 	rts;
+ENDPROC(_ret_from_exception)
 
 ENTRY(_return_from_int)
 	/* If someone else already raised IRQ 15, do nothing.  */
@@ -680,6 +695,7 @@ ENTRY(_return_from_int)
 	rti;
 2:
 	rts;
+ENDPROC(_return_from_int)
 
 ENTRY(_lower_to_irq14)
 #if defined(ANOMALY_05000281)
@@ -745,6 +761,7 @@ _schedule_and_signal:
 1:
 	RESTORE_CONTEXT
 	rti;
+ENDPROC(_lower_to_irq14)
 
 /* Make sure when we start, that the circular buffer is initialized properly
  * R0 and P0 are call clobbered, so we can use them here.
@@ -758,6 +775,7 @@ ENTRY(_init_exception_buff)
 	p0.l = _out_ptr_excause;
 	[p0] = r0;
 	rts;
+ENDPROC(_init_exception_buff)
 
 /*
  * Put these in the kernel data section - that should always be covered by

arch/blackfin/mach-common/interrupt.S

@@ -66,6 +66,7 @@ ENTRY(_evt_emulation)
 	SP += 12;
 	/* - GDB stub fills this in by itself (if defined) */
 	rte;
+ENDPROC(_evt_emulation)
 #endif
 
 /* Common interrupt entry code.	 First we do CLI, then push
@@ -251,3 +252,4 @@ ENTRY(_evt_system_call)
 #endif
 	call _system_call;
 	jump .Lcommon_restore_context;
+ENDPROC(_evt_system_call)

arch/blackfin/mach-common/ints-priority-dc.c

@@ -4,7 +4,7 @@
  * Author:
  *
  * Created:      ?
- * Description:  Set up the interupt priorities
+ * Description:  Set up the interrupt priorities
  *
  * Modified:
  *               1996 Roman Zippel

arch/blackfin/mach-common/ints-priority-sc.c

@@ -4,7 +4,7 @@
  * Author:
  *
  * Created:      ?
- * Description:  Set up the interupt priorities
+ * Description:  Set up the interrupt priorities
  *
  * Modified:
  *               1996 Roman Zippel

arch/blackfin/mach-common/lock.S

@@ -155,6 +155,7 @@ ENTRY(_cache_grab_lock)
 	( R7:0,P5:0 ) = [SP++];
 
 	RTS;
+ENDPROC(_cache_grab_lock)
 
 /* After the execution of critical code, the code is now locked into
  * the cache way. Now we need to set ILOC.
@@ -186,6 +187,7 @@ ENTRY(_cache_lock)
 
 	( R7:0,P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_cache_lock)
 
 #endif	/* BLKFIN_CACHE_LOCK */
 
@@ -193,7 +195,6 @@ ENTRY(_cache_lock)
  */
 
 ENTRY(_read_iloc)
-
 	P1.H = (IMEM_CONTROL >> 16);
 	P1.L = (IMEM_CONTROL & 0xFFFF);
 	R1 = 0xF;
@@ -202,3 +203,4 @@ ENTRY(_read_iloc)
 	R0 = R0 & R1;
 
 	RTS;
+ENDPROC(_read_iloc)

arch/blackfin/mach-common/pm.c

@@ -39,7 +39,7 @@
 #include <asm/io.h>
 #include <asm/dpmc.h>
 #include <asm/irq.h>
-
+#include <asm/gpio.h>
 
 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
 #define WAKEUP_TYPE	PM_WAKE_HIGH

arch/blackfin/mm/blackfin_sram.c

@@ -7,7 +7,7 @@
  * Description:  SRAM driver for Blackfin ADSP-BF5xx
  *
  * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2007 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -63,6 +63,7 @@ struct l1_sram_piece {
 	void *paddr;
 	int size;
 	int flag;
+	pid_t pid;
 };
 
 static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
@@ -80,7 +81,7 @@ static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
 #endif
 
 /* L1 Scratchpad SRAM initialization function */
-void l1sram_init(void)
+void __init l1sram_init(void)
 {
 	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
 	       L1_SCRATCH_LENGTH >> 10);
@@ -94,42 +95,43 @@ void l1sram_init(void)
 	spin_lock_init(&l1sram_lock);
 }
 
-void l1_data_sram_init(void)
+void __init l1_data_sram_init(void)
 {
 #if L1_DATA_A_LENGTH != 0
-	printk(KERN_INFO "Blackfin DATA_A SRAM: %d KB\n",
-	       L1_DATA_A_LENGTH >> 10);
-
 	memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
-	l1_data_A_sram[0].paddr = (void*)L1_DATA_A_START +
-		(_ebss_l1 - _sdata_l1);
+	l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START +
+					(_ebss_l1 - _sdata_l1);
 	l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
 	l1_data_A_sram[0].flag = SRAM_SLT_FREE;
+
+	printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n",
+	       L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10);
 #endif
 #if L1_DATA_B_LENGTH != 0
-	printk(KERN_INFO "Blackfin DATA_B SRAM: %d KB\n",
-	       L1_DATA_B_LENGTH >> 10);
-
 	memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
-	l1_data_B_sram[0].paddr = (void*)L1_DATA_B_START;
-	l1_data_B_sram[0].size = L1_DATA_B_LENGTH;
+	l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START +
+				(_ebss_b_l1 - _sdata_b_l1);
+	l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
 	l1_data_B_sram[0].flag = SRAM_SLT_FREE;
+
+	printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n",
+	       L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_data_sram_lock);
 }
 
-void l1_inst_sram_init(void)
+void __init l1_inst_sram_init(void)
 {
 #if L1_CODE_LENGTH != 0
-	printk(KERN_INFO "Blackfin Instruction SRAM: %d KB\n",
-	       L1_CODE_LENGTH >> 10);
-
 	memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
 	l1_inst_sram[0].paddr = (void*)L1_CODE_START + (_etext_l1 - _stext_l1);
 	l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
 	l1_inst_sram[0].flag = SRAM_SLT_FREE;
+
+	printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n",
+	       L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10);
 #endif
 
 	/* mutex initialize */
@@ -149,12 +151,13 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
 	size = (size + 3) & ~3;
 
 	/* not use the good method to match the best slot !!! */
-	/* search an available memeory slot */
+	/* search an available memory slot */
 	for (i = 0; i < count; i++) {
 		if ((pfree[i].flag == SRAM_SLT_FREE)
 		    && (pfree[i].size >= size)) {
 			addr = pfree[i].paddr;
 			pfree[i].flag = SRAM_SLT_ALLOCATED;
+			pfree[i].pid = current->pid;
 			index = i;
 			break;
 		}
@@ -162,10 +165,11 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
 	if (i >= count)
 		return NULL;
 
-	/* updated the NULL memeory slot !!! */
+	/* updated the NULL memory slot !!! */
 	if (pfree[i].size > size) {
 		for (i = 0; i < count; i++) {
 			if (pfree[i].flag == SRAM_SLT_NULL) {
+				pfree[i].pid = 0;
 				pfree[i].flag = SRAM_SLT_FREE;
 				pfree[i].paddr = addr + size;
 				pfree[i].size = pfree[index].size - size;
@@ -186,7 +190,7 @@ static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
 	int i, index = -1;
 	void *addr = NULL;
 
-	/* search an available memeory slot */
+	/* search an available memory slot */
 	for (i = 0; i < count; i++) {
 		if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
 			addr = pfree[i].paddr;
@@ -198,13 +202,15 @@ static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
 		return NULL;
 	*psize = best;
 
+	pfree[index].pid = current->pid;
 	pfree[index].flag = SRAM_SLT_ALLOCATED;
 	return addr;
 }
 
 /* L1 memory free function */
 static int _l1_sram_free(const void *addr,
-			 struct l1_sram_piece *pfree, int count)
+			struct l1_sram_piece *pfree,
+			int count)
 {
 	int i, index = 0;
 
@@ -222,12 +228,14 @@ static int _l1_sram_free(const void *addr,
 	if (i >= count)
 		return -1;
 
+	pfree[index].pid = 0;
 	pfree[index].flag = SRAM_SLT_FREE;
 
 	/* link the next address slot */
 	for (i = 0; i < count; i++) {
 		if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
 		    && (pfree[i].flag == SRAM_SLT_FREE)) {
+			pfree[i].pid = 0;
 			pfree[i].flag = SRAM_SLT_NULL;
 			pfree[index].size += pfree[i].size;
 			pfree[index].flag = SRAM_SLT_FREE;
@@ -538,3 +546,64 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags)
 	return addr;
 }
 EXPORT_SYMBOL(sram_alloc_with_lsl);
+
+#ifdef CONFIG_PROC_FS
+/* Once we get a real allocator, we'll throw all of this away.
+ * Until then, we need some sort of visibility into the L1 alloc.
+ */
+static void _l1sram_proc_read(char *buf, int *len, const char *desc,
+		struct l1_sram_piece *pfree, const int array_size)
+{
+	int i;
+
+	*len += sprintf(&buf[*len], "--- L1 %-14s Size  PID State\n", desc);
+	for (i = 0; i < array_size; ++i) {
+		const char *alloc_type;
+		switch (pfree[i].flag) {
+		case SRAM_SLT_NULL:      alloc_type = "NULL"; break;
+		case SRAM_SLT_FREE:      alloc_type = "FREE"; break;
+		case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break;
+		default:                 alloc_type = "????"; break;
+		}
+		*len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n",
+			pfree[i].paddr, pfree[i].paddr + pfree[i].size,
+			pfree[i].size, pfree[i].pid, alloc_type);
+	}
+}
+static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
+		int *eof, void *data)
+{
+	int len = 0;
+
+	_l1sram_proc_read(buf, &len, "Scratchpad",
+			l1_ssram, ARRAY_SIZE(l1_ssram));
+#if L1_DATA_A_LENGTH != 0
+	_l1sram_proc_read(buf, &len, "Data A",
+			l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+#endif
+#if L1_DATA_B_LENGTH != 0
+	_l1sram_proc_read(buf, &len, "Data B",
+			l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+#endif
+#if L1_CODE_LENGTH != 0
+	_l1sram_proc_read(buf, &len, "Instruction",
+			l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+#endif
+
+	return len;
+}
+
+static int __init l1sram_proc_init(void)
+{
+	struct proc_dir_entry *ptr;
+	ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
+	if (!ptr) {
+		printk(KERN_WARNING "unable to create /proc/sram\n");
+		return -1;
+	}
+	ptr->owner = THIS_MODULE;
+	ptr->read_proc = l1sram_proc_read;
+	return 0;
+}
+late_initcall(l1sram_proc_init);
+#endif

arch/blackfin/mm/init.c

@@ -7,7 +7,7 @@
  * Description:
  *
  * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2007 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -53,7 +53,7 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
+void __init show_mem(void)
 {
 	unsigned long i;
 	int free = 0, total = 0, reserved = 0, shared = 0;
@@ -86,7 +86,7 @@ void show_mem(void)
  * The parameters are pointers to where to stick the starting and ending
  * addresses  of available kernel virtual memory.
  */
-void paging_init(void)
+void __init paging_init(void)
 {
 	/*
 	 * make sure start_mem is page aligned,  otherwise bootmem and
@@ -125,7 +125,7 @@ void paging_init(void)
 	}
 }
 
-void mem_init(void)
+void __init mem_init(void)
 {
 	unsigned int codek = 0, datak = 0, initk = 0;
 	unsigned long tmp;
@@ -169,7 +169,7 @@ void mem_init(void)
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
+void __init free_initrd_mem(unsigned long start, unsigned long end)
 {
 	int pages = 0;
 	for (; start < end; start += PAGE_SIZE) {
@@ -183,14 +183,14 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void free_initmem(void)
+void __init free_initmem(void)
 {
 #ifdef CONFIG_RAMKERNEL
 	unsigned long addr;
-/*
- *	the following code should be cool even if these sections
- *	are not page aligned.
- */
+	/*
+	 *	the following code should be cool even if these sections
+	 *	are not page aligned.
+	 */
 	addr = PAGE_ALIGN((unsigned long)(__init_begin));
 	/* next to check that the page we free is not a partial page */
 	for (; addr + PAGE_SIZE < (unsigned long)(__init_end);

drivers/net/smc91x.h

@@ -58,6 +58,8 @@
 #elif defined(CONFIG_BFIN)
 
 #define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
+#define RPC_LSA_DEFAULT		RPC_LED_100_10
+#define RPC_LSB_DEFAULT		RPC_LED_TX_RX
 
 # if defined (CONFIG_BFIN561_EZKIT)
 #define SMC_CAN_USE_8BIT	0

drivers/serial/bfin_5xx.c

@@ -185,6 +185,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 		uart->port.icount.brk++;
 		if (uart_handle_break(&uart->port))
 			goto ignore_char;
+		status &= ~(PE | FE);
 	}
 	if (status & PE)
 		uart->port.icount.parity++;
@@ -341,6 +342,7 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 		uart->port.icount.brk++;
 		if (uart_handle_break(&uart->port))
 			goto dma_ignore_char;
+		status &= ~(PE | FE);
 	}
 	if (status & PE)
 		uart->port.icount.parity++;
@@ -517,6 +519,14 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
  */
 static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
 {
+	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+	u16 lcr = UART_GET_LCR(uart);
+	if (break_state)
+		lcr |= SB;
+	else
+		lcr &= ~SB;
+	UART_PUT_LCR(uart, lcr);
+	SSYNC();
 }
 
 static int bfin_serial_startup(struct uart_port *port)
@@ -625,11 +635,12 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	if (termios->c_cflag & CSTOPB)
 		lcr |= STB;
-	if (termios->c_cflag & PARENB) {
+	if (termios->c_cflag & PARENB)
 		lcr |= PEN;
-		if (!(termios->c_cflag & PARODD))
-			lcr |= EPS;
-	}
+	if (!(termios->c_cflag & PARODD))
+		lcr |= EPS;
+	if (termios->c_cflag & CMSPAR)
+		lcr |= STP;
 
 	port->read_status_mask = OE;
 	if (termios->c_iflag & INPCK)

drivers/spi/spi_bfin5xx.c

@@ -582,14 +582,19 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 	dev_dbg(&drv_data->pdev->dev, "in dma_irq_handler\n");
 	clear_dma_irqstat(CH_SPI);
 
+	/* Wait for DMA to complete */
+	while (get_dma_curr_irqstat(CH_SPI) & DMA_RUN)
+		continue;
+
 	/*
-	 * wait for the last transaction shifted out.  yes, these two
-	 * while loops are supposed to be the same (see the HRM).
+	 * wait for the last transaction shifted out.  HRM states:
+	 * at this point there may still be data in the SPI DMA FIFO waiting
+	 * to be transmitted ... software needs to poll TXS in the SPI_STAT
+	 * register until it goes low for 2 successive reads
 	 */
 	if (drv_data->tx != NULL) {
-		while (bfin_read_SPI_STAT() & TXS)
-			continue;
-		while (bfin_read_SPI_STAT() & TXS)
+		while ((bfin_read_SPI_STAT() & TXS) ||
+		       (bfin_read_SPI_STAT() & TXS))
 			continue;
 	}
 
@@ -1082,7 +1087,7 @@ static int setup(struct spi_device *spi)
  */
 static void cleanup(struct spi_device *spi)
 {
-	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+	struct chip_data *chip = spi_get_ctldata(spi);
 
 	kfree(chip);
 }

include/asm-blackfin/blackfin.h

@@ -6,7 +6,11 @@
 #ifndef _BLACKFIN_H_
 #define _BLACKFIN_H_
 
-#include <asm/macros.h>
+#define LO(con32) ((con32) & 0xFFFF)
+#define lo(con32) ((con32) & 0xFFFF)
+#define HI(con32) (((con32) >> 16) & 0xFFFF)
+#define hi(con32) (((con32) >> 16) & 0xFFFF)
+
 #include <asm/mach/blackfin.h>
 #include <asm/bfin-global.h>
 

include/asm-blackfin/gpio.h

@@ -332,6 +332,7 @@ struct gpio_port_s {
 	unsigned short inen;
 
 	unsigned short fer;
+	unsigned short reserved;
 };
 #endif /*CONFIG_PM*/
 

include/asm-blackfin/mach-common/def_LPBlackfin.h

@@ -42,6 +42,12 @@
 
 #if defined(ANOMALY_05000198)
 
+#define bfin_read8(addr) ({ unsigned char __v; \
+		__asm__ __volatile__ ("NOP;\n\t" \
+			"%0 = b[%1] (z);\n\t" \
+			: "=d"(__v) : "a"(addr)); \
+		__v; })
+
 #define bfin_read16(addr) ({ unsigned __v; \
                        __asm__ __volatile__ ("NOP;\n\t"\
 	         			     			"%0 = w[%1] (z);\n\t"\
@@ -52,6 +58,11 @@
                                             "%0 = [%1];\n\t"\
   : "=d"(__v) : "a"(addr)); __v; })
 
+#define bfin_write8(addr, val) ({ \
+		__asm__ __volatile__ ("NOP;\n\t" \
+			"b[%0] = %1;\n\t" \
+			: : "a"(addr), "d"(val) : "memory");})
+
 #define bfin_write16(addr,val) ({\
                       __asm__ __volatile__ ("NOP;\n\t"\
                                             "w[%0] = %1;\n\t"\
@@ -64,6 +75,12 @@
 
 #else
 
+#define bfin_read8(addr) ({ unsigned char __v; \
+		__asm__ __volatile__ ( \
+			"%0 = b[%1] (z);\n\t" \
+			:"=d"(__v) : "a"(addr)); \
+		__v; })
+
 #define bfin_read16(addr) ({ unsigned __v; \
                        __asm__ __volatile__ (\
 	         			     			"%0 = w[%1] (z);\n\t"\
@@ -74,6 +91,11 @@
                                             "%0 = [%1];\n\t"\
   : "=d"(__v) : "a"(addr)); __v; })
 
+#define bfin_write8(addr, val) ({ \
+		__asm__ __volatile__ ( \
+			"b[%0] = %1; \n\t" \
+			::"a"(addr), "d"(val) : "memory");})
+
 #define bfin_write16(addr,val) ({\
                       __asm__ __volatile__ (\
                                             "w[%0] = %1;\n\t"\

include/asm-blackfin/macros.h

@@ -1,95 +0,0 @@
-/************************************************************************
- *
- * macros.h
- *
- * (c) Copyright 2001-2003 Analog Devices, Inc.  All rights reserved.
- *
- ************************************************************************/
-
-/* Defines various assembly macros. */
-
-#ifndef _MACROS_H
-#define _MACROS_H
-
-#define LO(con32) ((con32) & 0xFFFF)
-#define lo(con32) ((con32) & 0xFFFF)
-#define HI(con32) (((con32) >> 16) & 0xFFFF)
-#define hi(con32) (((con32) >> 16) & 0xFFFF)
-
-/*
- * Set the corresponding bits in a System Register (SR);
- * All bits set in "mask" will be set in the system register
- * specified by "sys_reg" bitset_SR(sys_reg, mask), where
- * sys_reg is the system register and mask are the bits to be set.
- */
-#define bitset_SR(sys_reg, mask)\
-		[--SP] = (R7:6);\
-		r7 = sys_reg;\
-		r6.l = (mask) & 0xffff;\
-		r6.h = (mask) >> 16;\
-		r7 = r7 | r6;\
-		sys_reg = r7;\
-		csync;\
-		(R7:6) = [SP++]
-
-/*
- * Clear the corresponding bits in a System Register (SR);
- * All bits set in "mask" will be cleared in the SR
- * specified by "sys_reg" bitclr_SR(sys_reg, mask), where
- * sys_reg is the SR and mask are the bits to be cleared.
- */
-#define bitclr_SR(sys_reg, mask)\
-		[--SP] = (R7:6);\
-		r7 = sys_reg;\
-		r7 =~ r7;\
-		r6.l = (mask) & 0xffff;\
-		r6.h = (mask) >> 16;\
-		r7 = r7 | r6;\
-		r7 =~ r7;\
-		sys_reg = r7;\
-		csync;\
-		(R7:6) = [SP++]
-
-/*
- * Set the corresponding bits in a Memory Mapped Register (MMR);
- * All bits set in "mask" will be set in the MMR specified by "mmr_reg"
- * bitset_MMR(mmr_reg, mask), where mmr_reg is the MMR and mask are
- * the bits to be set.
- */
-#define bitset_MMR(mmr_reg, mask)\
-		[--SP] = (R7:6);\
-		[--SP] = P5;\
-		p5.l = mmr_reg & 0xffff;\
-		p5.h = mmr_reg >> 16;\
-		r7 = [p5];\
-		r6.l = (mask) & 0xffff;\
-		r6.h = (mask) >> 16;\
-		r7 = r7 | r6;\
-		[p5] = r7;\
-		csync;\
-		p5 = [SP++];\
-		(R7:6) = [SP++]
-
-/*
- * Clear the corresponding bits in a Memory Mapped Register (MMR);
- * All bits set in "mask" will be cleared in the MMR specified by "mmr_reg"
- * bitclr_MMRreg(mmr_reg, mask), where sys_reg is the MMR and mask are
- * the bits to be cleared.
- */
-#define bitclr_MMR(mmr_reg, mask)\
-		[--SP] = (R7:6);\
-		[--SP] = P5;\
-		p5.l = mmr_reg & 0xffff;\
-		p5.h = mmr_reg >> 16;\
-		r7 = [p5];\
-		r7 =~ r7;\
-		r6.l = (mask) & 0xffff;\
-		r6.h = (mask) >> 16;\
-		r7 = r7 | r6;\
-		r7 =~ r7;\
-		[p5] = r7;\
-		csync;\
-		p5 = [SP++];\
-		(R7:6) = [SP++]
-
-#endif				/* _MACROS_H */