|
@@ -1,8 +1,11 @@
|
|
|
/*
|
|
|
- * $Id: saa7134-dvb.c,v 1.13 2005/06/12 04:19:19 mchehab Exp $
|
|
|
+ * $Id: saa7134-dvb.c,v 1.18 2005/07/04 16:05:50 mkrufky Exp $
|
|
|
*
|
|
|
* (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
|
|
|
*
|
|
|
+ * Extended 3 / 2005 by Hartmut Hackmann to support various
|
|
|
+ * cards with the tda10046 DVB-T channel decoder
|
|
|
+ *
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
@@ -30,20 +33,25 @@
|
|
|
#include "saa7134-reg.h"
|
|
|
#include "saa7134.h"
|
|
|
|
|
|
-#include "dvb-pll.h"
|
|
|
-#include "mt352.h"
|
|
|
-#include "mt352_priv.h" /* FIXME */
|
|
|
-#include "tda1004x.h"
|
|
|
+#if CONFIG_DVB_MT352
|
|
|
+# include "mt352.h"
|
|
|
+# include "mt352_priv.h" /* FIXME */
|
|
|
+#endif
|
|
|
+#if CONFIG_DVB_TDA1004X
|
|
|
+# include "tda1004x.h"
|
|
|
+#endif
|
|
|
|
|
|
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
static unsigned int antenna_pwr = 0;
|
|
|
+
|
|
|
module_param(antenna_pwr, int, 0444);
|
|
|
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
|
|
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
|
|
+#if CONFIG_DVB_MT352
|
|
|
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
|
|
|
{
|
|
|
u32 ok;
|
|
@@ -138,48 +146,387 @@ static struct mt352_config pinnacle_300i = {
|
|
|
.demod_init = mt352_pinnacle_init,
|
|
|
.pll_set = mt352_pinnacle_pll_set,
|
|
|
};
|
|
|
+#endif
|
|
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
|
|
-static int medion_cardbus_init(struct dvb_frontend* fe)
|
|
|
+#if CONFIG_DVB_TDA1004X
|
|
|
+static int philips_tu1216_pll_init(struct dvb_frontend *fe)
|
|
|
{
|
|
|
- /* anything to do here ??? */
|
|
|
+ struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
+ static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
|
|
|
+ struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
|
|
|
+
|
|
|
+ /* setup PLL configuration */
|
|
|
+ if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
|
+ return -EIO;
|
|
|
+ msleep(1);
|
|
|
+
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int medion_cardbus_pll_set(struct dvb_frontend* fe,
|
|
|
- struct dvb_frontend_parameters* params)
|
|
|
+static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
|
{
|
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
- struct v4l2_frequency f;
|
|
|
+ u8 tuner_buf[4];
|
|
|
+ struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
|
|
|
+ sizeof(tuner_buf) };
|
|
|
+ int tuner_frequency = 0;
|
|
|
+ u8 band, cp, filter;
|
|
|
+
|
|
|
+ /* determine charge pump */
|
|
|
+ tuner_frequency = params->frequency + 36166000;
|
|
|
+ if (tuner_frequency < 87000000)
|
|
|
+ return -EINVAL;
|
|
|
+ else if (tuner_frequency < 130000000)
|
|
|
+ cp = 3;
|
|
|
+ else if (tuner_frequency < 160000000)
|
|
|
+ cp = 5;
|
|
|
+ else if (tuner_frequency < 200000000)
|
|
|
+ cp = 6;
|
|
|
+ else if (tuner_frequency < 290000000)
|
|
|
+ cp = 3;
|
|
|
+ else if (tuner_frequency < 420000000)
|
|
|
+ cp = 5;
|
|
|
+ else if (tuner_frequency < 480000000)
|
|
|
+ cp = 6;
|
|
|
+ else if (tuner_frequency < 620000000)
|
|
|
+ cp = 3;
|
|
|
+ else if (tuner_frequency < 830000000)
|
|
|
+ cp = 5;
|
|
|
+ else if (tuner_frequency < 895000000)
|
|
|
+ cp = 7;
|
|
|
+ else
|
|
|
+ return -EINVAL;
|
|
|
+
|
|
|
+ /* determine band */
|
|
|
+ if (params->frequency < 49000000)
|
|
|
+ return -EINVAL;
|
|
|
+ else if (params->frequency < 161000000)
|
|
|
+ band = 1;
|
|
|
+ else if (params->frequency < 444000000)
|
|
|
+ band = 2;
|
|
|
+ else if (params->frequency < 861000000)
|
|
|
+ band = 4;
|
|
|
+ else
|
|
|
+ return -EINVAL;
|
|
|
+
|
|
|
+ /* setup PLL filter */
|
|
|
+ switch (params->u.ofdm.bandwidth) {
|
|
|
+ case BANDWIDTH_6_MHZ:
|
|
|
+ filter = 0;
|
|
|
+ break;
|
|
|
+
|
|
|
+ case BANDWIDTH_7_MHZ:
|
|
|
+ filter = 0;
|
|
|
+ break;
|
|
|
+
|
|
|
+ case BANDWIDTH_8_MHZ:
|
|
|
+ filter = 1;
|
|
|
+ break;
|
|
|
|
|
|
- /*
|
|
|
- * this instructs tuner.o to set the frequency, the call will
|
|
|
- * end up in tuner_command(), VIDIOC_S_FREQUENCY switch.
|
|
|
- * tda9887.o will see that as well.
|
|
|
+ default:
|
|
|
+ return -EINVAL;
|
|
|
+ }
|
|
|
+
|
|
|
+ /* calculate divisor
|
|
|
+ * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
|
|
|
*/
|
|
|
- f.tuner = 0;
|
|
|
- f.type = V4L2_TUNER_DIGITAL_TV;
|
|
|
- f.frequency = params->frequency / 1000 * 16 / 1000;
|
|
|
- saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
|
|
|
+ tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
|
|
|
+
|
|
|
+ /* setup tuner buffer */
|
|
|
+ tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
|
|
|
+ tuner_buf[1] = tuner_frequency & 0xff;
|
|
|
+ tuner_buf[2] = 0xca;
|
|
|
+ tuner_buf[3] = (cp << 5) | (filter << 3) | band;
|
|
|
+
|
|
|
+ if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
|
+ return -EIO;
|
|
|
+
|
|
|
+ msleep(1);
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int fe_request_firmware(struct dvb_frontend* fe,
|
|
|
- const struct firmware **fw, char* name)
|
|
|
+static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
|
|
|
+ const struct firmware **fw, char *name)
|
|
|
{
|
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
return request_firmware(fw, name, &dev->pci->dev);
|
|
|
}
|
|
|
|
|
|
+static struct tda1004x_config philips_tu1216_config = {
|
|
|
+
|
|
|
+ .demod_address = 0x8,
|
|
|
+ .invert = 1,
|
|
|
+ .invert_oclk = 1,
|
|
|
+ .xtal_freq = TDA10046_XTAL_4M,
|
|
|
+ .agc_config = TDA10046_AGC_DEFAULT,
|
|
|
+ .if_freq = TDA10046_FREQ_3617,
|
|
|
+ .pll_init = philips_tu1216_pll_init,
|
|
|
+ .pll_set = philips_tu1216_pll_set,
|
|
|
+ .pll_sleep = NULL,
|
|
|
+ .request_firmware = philips_tu1216_request_firmware,
|
|
|
+};
|
|
|
+
|
|
|
+/* ------------------------------------------------------------------ */
|
|
|
+
|
|
|
+
|
|
|
+static int philips_fmd1216_pll_init(struct dvb_frontend *fe)
|
|
|
+{
|
|
|
+ struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
+ /* this message is to set up ATC and ALC */
|
|
|
+ static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
|
|
|
+ struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
|
|
|
+
|
|
|
+ if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
|
+ return -EIO;
|
|
|
+ msleep(1);
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static void philips_fmd1216_analog(struct dvb_frontend *fe)
|
|
|
+{
|
|
|
+ struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
+ /* this message actually turns the tuner back to analog mode */
|
|
|
+ static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 };
|
|
|
+ struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
|
|
|
+
|
|
|
+ i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
|
+ msleep(1);
|
|
|
+ fmd1216_init[2] = 0x86;
|
|
|
+ fmd1216_init[3] = 0x54;
|
|
|
+ i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
|
+ msleep(1);
|
|
|
+}
|
|
|
+
|
|
|
+static int philips_fmd1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
|
+{
|
|
|
+ struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
+ u8 tuner_buf[4];
|
|
|
+ struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = tuner_buf,.len =
|
|
|
+ sizeof(tuner_buf) };
|
|
|
+ int tuner_frequency = 0;
|
|
|
+ int divider = 0;
|
|
|
+ u8 band, mode, cp;
|
|
|
+
|
|
|
+ /* determine charge pump */
|
|
|
+ tuner_frequency = params->frequency + 36130000;
|
|
|
+ if (tuner_frequency < 87000000)
|
|
|
+ return -EINVAL;
|
|
|
+ /* low band */
|
|
|
+ else if (tuner_frequency < 180000000) {
|
|
|
+ band = 1;
|
|
|
+ mode = 7;
|
|
|
+ cp = 0;
|
|
|
+ } else if (tuner_frequency < 195000000) {
|
|
|
+ band = 1;
|
|
|
+ mode = 6;
|
|
|
+ cp = 1;
|
|
|
+ /* mid band */
|
|
|
+ } else if (tuner_frequency < 366000000) {
|
|
|
+ if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
|
+ band = 10;
|
|
|
+ } else {
|
|
|
+ band = 2;
|
|
|
+ }
|
|
|
+ mode = 7;
|
|
|
+ cp = 0;
|
|
|
+ } else if (tuner_frequency < 478000000) {
|
|
|
+ if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
|
+ band = 10;
|
|
|
+ } else {
|
|
|
+ band = 2;
|
|
|
+ }
|
|
|
+ mode = 6;
|
|
|
+ cp = 1;
|
|
|
+ /* high band */
|
|
|
+ } else if (tuner_frequency < 662000000) {
|
|
|
+ if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
|
+ band = 12;
|
|
|
+ } else {
|
|
|
+ band = 4;
|
|
|
+ }
|
|
|
+ mode = 7;
|
|
|
+ cp = 0;
|
|
|
+ } else if (tuner_frequency < 840000000) {
|
|
|
+ if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
|
+ band = 12;
|
|
|
+ } else {
|
|
|
+ band = 4;
|
|
|
+ }
|
|
|
+ mode = 6;
|
|
|
+ cp = 1;
|
|
|
+ } else {
|
|
|
+ if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
|
+ band = 12;
|
|
|
+ } else {
|
|
|
+ band = 4;
|
|
|
+ }
|
|
|
+ mode = 7;
|
|
|
+ cp = 1;
|
|
|
+
|
|
|
+ }
|
|
|
+ /* calculate divisor */
|
|
|
+ /* ((36166000 + Finput) / 166666) rounded! */
|
|
|
+ divider = (tuner_frequency + 83333) / 166667;
|
|
|
+
|
|
|
+ /* setup tuner buffer */
|
|
|
+ tuner_buf[0] = (divider >> 8) & 0x7f;
|
|
|
+ tuner_buf[1] = divider & 0xff;
|
|
|
+ tuner_buf[2] = 0x80 | (cp << 6) | (mode << 3) | 4;
|
|
|
+ tuner_buf[3] = 0x40 | band;
|
|
|
+
|
|
|
+ if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
|
+ return -EIO;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+
|
|
|
static struct tda1004x_config medion_cardbus = {
|
|
|
- .demod_address = 0x08, /* not sure this is correct */
|
|
|
- .invert = 0,
|
|
|
- .invert_oclk = 0,
|
|
|
- .pll_init = medion_cardbus_init,
|
|
|
- .pll_set = medion_cardbus_pll_set,
|
|
|
- .request_firmware = fe_request_firmware,
|
|
|
+ .demod_address = 0x08,
|
|
|
+ .invert = 1,
|
|
|
+ .invert_oclk = 0,
|
|
|
+ .xtal_freq = TDA10046_XTAL_16M,
|
|
|
+ .agc_config = TDA10046_AGC_IFO_AUTO_NEG,
|
|
|
+ .if_freq = TDA10046_FREQ_3613,
|
|
|
+ .pll_init = philips_fmd1216_pll_init,
|
|
|
+ .pll_set = philips_fmd1216_pll_set,
|
|
|
+ .pll_sleep = philips_fmd1216_analog,
|
|
|
+ .request_firmware = NULL,
|
|
|
+};
|
|
|
+
|
|
|
+/* ------------------------------------------------------------------ */
|
|
|
+
|
|
|
+struct tda827x_data {
|
|
|
+ u32 lomax;
|
|
|
+ u8 spd;
|
|
|
+ u8 bs;
|
|
|
+ u8 bp;
|
|
|
+ u8 cp;
|
|
|
+ u8 gc3;
|
|
|
+ u8 div1p5;
|
|
|
+};
|
|
|
+
|
|
|
+static struct tda827x_data tda827x_dvbt[] = {
|
|
|
+ { .lomax = 62000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
|
|
|
+ { .lomax = 66000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
|
|
|
+ { .lomax = 76000000, .spd = 3, .bs = 1, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
|
|
|
+ { .lomax = 84000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
|
|
|
+ { .lomax = 93000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 98000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 109000000, .spd = 3, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 123000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
|
+ { .lomax = 133000000, .spd = 2, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
|
+ { .lomax = 151000000, .spd = 2, .bs = 1, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 154000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 181000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 0, .div1p5 = 0},
|
|
|
+ { .lomax = 185000000, .spd = 2, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 217000000, .spd = 2, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 244000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
|
+ { .lomax = 265000000, .spd = 1, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
|
+ { .lomax = 302000000, .spd = 1, .bs = 1, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 324000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 370000000, .spd = 1, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 454000000, .spd = 1, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 493000000, .spd = 0, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
|
+ { .lomax = 530000000, .spd = 0, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
|
+ { .lomax = 554000000, .spd = 0, .bs = 1, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
|
+ { .lomax = 604000000, .spd = 0, .bs = 1, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
|
|
|
+ { .lomax = 696000000, .spd = 0, .bs = 2, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
|
|
|
+ { .lomax = 740000000, .spd = 0, .bs = 2, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
|
|
|
+ { .lomax = 820000000, .spd = 0, .bs = 3, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
|
|
|
+ { .lomax = 865000000, .spd = 0, .bs = 3, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
|
|
|
+ { .lomax = 0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0}
|
|
|
+};
|
|
|
+
|
|
|
+static int philips_tda827x_pll_init(struct dvb_frontend *fe)
|
|
|
+{
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int philips_tda827x_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
|
+{
|
|
|
+ struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
+ u8 tuner_buf[14];
|
|
|
+
|
|
|
+ struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,
|
|
|
+ .len = sizeof(tuner_buf) };
|
|
|
+ int i, tuner_freq, if_freq;
|
|
|
+ u32 N;
|
|
|
+ switch (params->u.ofdm.bandwidth) {
|
|
|
+ case BANDWIDTH_6_MHZ:
|
|
|
+ if_freq = 4000000;
|
|
|
+ break;
|
|
|
+ case BANDWIDTH_7_MHZ:
|
|
|
+ if_freq = 4500000;
|
|
|
+ break;
|
|
|
+ default: /* 8 MHz or Auto */
|
|
|
+ if_freq = 5000000;
|
|
|
+ break;
|
|
|
+ }
|
|
|
+ tuner_freq = params->frequency + if_freq;
|
|
|
+
|
|
|
+ i = 0;
|
|
|
+ while (tda827x_dvbt[i].lomax < tuner_freq) {
|
|
|
+ if(tda827x_dvbt[i + 1].lomax == 0)
|
|
|
+ break;
|
|
|
+ i++;
|
|
|
+ }
|
|
|
+
|
|
|
+ N = ((tuner_freq + 125000) / 250000) << (tda827x_dvbt[i].spd + 2);
|
|
|
+ tuner_buf[0] = 0;
|
|
|
+ tuner_buf[1] = (N>>8) | 0x40;
|
|
|
+ tuner_buf[2] = N & 0xff;
|
|
|
+ tuner_buf[3] = 0;
|
|
|
+ tuner_buf[4] = 0x52;
|
|
|
+ tuner_buf[5] = (tda827x_dvbt[i].spd << 6) + (tda827x_dvbt[i].div1p5 << 5) +
|
|
|
+ (tda827x_dvbt[i].bs << 3) + tda827x_dvbt[i].bp;
|
|
|
+ tuner_buf[6] = (tda827x_dvbt[i].gc3 << 4) + 0x8f;
|
|
|
+ tuner_buf[7] = 0xbf;
|
|
|
+ tuner_buf[8] = 0x2a;
|
|
|
+ tuner_buf[9] = 0x05;
|
|
|
+ tuner_buf[10] = 0xff;
|
|
|
+ tuner_buf[11] = 0x00;
|
|
|
+ tuner_buf[12] = 0x00;
|
|
|
+ tuner_buf[13] = 0x40;
|
|
|
+
|
|
|
+ tuner_msg.len = 14;
|
|
|
+ if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
|
+ return -EIO;
|
|
|
+
|
|
|
+ msleep(500);
|
|
|
+ /* correct CP value */
|
|
|
+ tuner_buf[0] = 0x30;
|
|
|
+ tuner_buf[1] = 0x50 + tda827x_dvbt[i].cp;
|
|
|
+ tuner_msg.len = 2;
|
|
|
+ i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static void philips_tda827x_pll_sleep(struct dvb_frontend *fe)
|
|
|
+{
|
|
|
+ struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
+ static u8 tda827x_sleep[] = { 0x30, 0xd0};
|
|
|
+ struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tda827x_sleep,
|
|
|
+ .len = sizeof(tda827x_sleep) };
|
|
|
+ i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
|
+}
|
|
|
+
|
|
|
+static struct tda1004x_config tda827x_lifeview_config = {
|
|
|
+ .demod_address = 0x08,
|
|
|
+ .invert = 1,
|
|
|
+ .invert_oclk = 0,
|
|
|
+ .xtal_freq = TDA10046_XTAL_16M,
|
|
|
+ .agc_config = TDA10046_AGC_TDA827X,
|
|
|
+ .if_freq = TDA10046_FREQ_045,
|
|
|
+ .pll_init = philips_tda827x_pll_init,
|
|
|
+ .pll_set = philips_tda827x_pll_set,
|
|
|
+ .pll_sleep = philips_tda827x_pll_sleep,
|
|
|
+ .request_firmware = NULL,
|
|
|
};
|
|
|
+#endif
|
|
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
|
@@ -197,18 +544,31 @@ static int dvb_init(struct saa7134_dev *dev)
|
|
|
dev);
|
|
|
|
|
|
switch (dev->board) {
|
|
|
+#if CONFIG_DVB_MT352
|
|
|
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
|
|
|
printk("%s: pinnacle 300i dvb setup\n",dev->name);
|
|
|
dev->dvb.frontend = mt352_attach(&pinnacle_300i,
|
|
|
&dev->i2c_adap);
|
|
|
break;
|
|
|
+#endif
|
|
|
+#if CONFIG_DVB_TDA1004X
|
|
|
case SAA7134_BOARD_MD7134:
|
|
|
dev->dvb.frontend = tda10046_attach(&medion_cardbus,
|
|
|
&dev->i2c_adap);
|
|
|
- if (NULL == dev->dvb.frontend)
|
|
|
- printk("%s: Hmm, looks like this is the old MD7134 "
|
|
|
- "version without DVB-T support\n",dev->name);
|
|
|
break;
|
|
|
+ case SAA7134_BOARD_PHILIPS_TOUGH:
|
|
|
+ dev->dvb.frontend = tda10046_attach(&philips_tu1216_config,
|
|
|
+ &dev->i2c_adap);
|
|
|
+ break;
|
|
|
+ case SAA7134_BOARD_FLYDVBTDUO:
|
|
|
+ dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
|
|
|
+ &dev->i2c_adap);
|
|
|
+ break;
|
|
|
+ case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS:
|
|
|
+ dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
|
|
|
+ &dev->i2c_adap);
|
|
|
+ break;
|
|
|
+#endif
|
|
|
default:
|
|
|
printk("%s: Huh? unknown DVB card?\n",dev->name);
|
|
|
break;
|
|
@@ -227,8 +587,6 @@ static int dvb_fini(struct saa7134_dev *dev)
|
|
|
{
|
|
|
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
|
|
|
|
|
|
- printk("%s: %s\n",dev->name,__FUNCTION__);
|
|
|
-
|
|
|
switch (dev->board) {
|
|
|
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
|
|
|
/* otherwise we don't detect the tuner on next insmod */
|