Merge branch 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux into late/kirkwood

* 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux:
  ARM: Dove: allow PCI to be disabled
  ARM: dove: SolidRun CuBox DT
  ARM: dove: add device tree descriptors
  ARM: dove: add device tree based machine descriptor
  ARM: dove: add crypto engine
  ARM: dove: add clock gating control
  ARM: dove: unify clock setup
  ARM: initial DTS support for km_kirkwood
  arm: add documentation describing Marvell families of SoC
  ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar
  ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar
  ARM: Kirkwood: Iomega ix2-200 DT support

Context conflicts in arch/arm/Kconfig and arch/arm/mach-dove/common.c.

The new device trees added to arch/arm/mach-kirkwood/Makefile.boot are
kept and dealt with in a separate changeset, since moving them out to
the new Makefile in this merge commit doesn't work well.

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/arm/Marvell/README

@@ -0,0 +1,232 @@
+ARM Marvell SoCs
+================
+
+This document lists all the ARM Marvell SoCs that are currently
+supported in mainline by the Linux kernel. As the Marvell families of
+SoCs are large and complex, it is hard to understand where the support
+for a particular SoC is available in the Linux kernel. This document
+tries to help in understanding where those SoCs are supported, and to
+match them with their corresponding public datasheet, when available.
+
+Orion family
+------------
+
+  Flavors:
+        88F5082
+        88F5181
+        88F5181L
+        88F5182
+               Datasheet               : http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf
+               Programmer's User Guide : http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf
+               User Manual             : http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf
+        88F5281
+               Datasheet               : http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
+        88F6183
+  Core: Feroceon ARMv5 compatible
+  Linux kernel mach directory: arch/arm/mach-orion5x
+  Linux kernel plat directory: arch/arm/plat-orion
+
+Kirkwood family
+---------------
+
+  Flavors:
+        88F6282 a.k.a Armada 300
+                Product Brief  : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        88F6283 a.k.a Armada 310
+                Product Brief  : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        88F6190
+                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        88F6192
+                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        88F6182
+        88F6180
+                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        88F6281
+                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+  Homepage: http://www.marvell.com/embedded-processors/kirkwood/
+  Core: Feroceon ARMv5 compatible
+  Linux kernel mach directory: arch/arm/mach-kirkwood
+  Linux kernel plat directory: arch/arm/plat-orion
+
+Discovery family
+----------------
+
+  Flavors:
+        MV78100
+                Product Brief  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+        MV78200
+                Product Brief  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+        MV76100
+                Not supported by the Linux kernel.
+
+  Core: Feroceon ARMv5 compatible
+
+  Linux kernel mach directory: arch/arm/mach-mv78xx0
+  Linux kernel plat directory: arch/arm/plat-orion
+
+EBU Armada family
+-----------------
+
+  Armada 370 Flavors:
+        88F6710
+        88F6707
+        88F6W11
+
+  Armada XP Flavors:
+        MV78230
+        MV78260
+        MV78460
+
+  Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
+  No public datasheet available.
+
+  Core: Sheeva ARMv7 compatible
+
+  Linux kernel mach directory: arch/arm/mach-mvebu
+  Linux kernel plat directory: none
+
+Avanta family
+-------------
+
+  Flavors:
+       88F6510
+       88F6530P
+       88F6550
+       88F6560
+  Homepage     : http://www.marvell.com/broadband/
+  Product Brief: http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf
+  No public datasheet available.
+
+  Core: ARMv5 compatible
+
+  Linux kernel mach directory: no code in mainline yet, planned for the future
+  Linux kernel plat directory: no code in mainline yet, planned for the future
+
+Dove family (application processor)
+-----------------------------------
+
+  Flavors:
+        88AP510 a.k.a Armada 510
+                Product Brief   : http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf
+                Hardware Spec   : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf
+                Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
+  Homepage: http://www.marvell.com/application-processors/armada-500/
+  Core: ARMv7 compatible
+  Directory: arch/arm/mach-dove
+
+PXA 2xx/3xx/93x/95x family
+--------------------------
+
+  Flavors:
+        PXA21x, PXA25x, PXA26x
+             Application processor only
+             Core: ARMv5 XScale core
+        PXA270, PXA271, PXA272
+             Product Brief         : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf
+             Design guide          : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf
+             Developers manual     : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf
+             Specification         : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf
+             Specification update  : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf
+             Application processor only
+             Core: ARMv5 XScale core
+        PXA300, PXA310, PXA320
+             PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf
+             PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf
+             PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf
+             Design guide          : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf
+             Developers manual     : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip
+             Specifications        : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf
+             Specification Update  : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip
+             Reference Manual      : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf
+             Application processor only
+             Core: ARMv5 XScale core
+        PXA930, PXA935
+             Application processor with Communication processor
+             Core: ARMv5 XScale core
+        PXA955
+             Application processor with Communication processor
+             Core: ARMv7 compatible Sheeva PJ4 core
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x,
+      PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while
+      the later PXA95x were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the MMP/MMP2 family of SoCs.
+
+   Linux kernel mach directory: arch/arm/mach-pxa
+   Linux kernel plat directory: arch/arm/plat-pxa
+
+MMP/MMP2 family (communication processor)
+-----------------------------------------
+
+   Flavors:
+        PXA168, a.k.a Armada 168
+             Homepage             : http://www.marvell.com/application-processors/armada-100/armada-168.jsp
+             Product brief        : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf
+             Hardware manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf
+             Software manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf
+             Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf
+             Boot ROM manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf
+             App node package     : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf
+             Application processor only
+             Core: ARMv5 compatible Marvell PJ1 (Mohawk)
+        PXA910
+             Homepage             : http://www.marvell.com/communication-processors/pxa910/
+             Product Brief        : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf
+             Application processor with Communication processor
+             Core: ARMv5 compatible Marvell PJ1 (Mohawk)
+        MMP2, a.k.a Armada 610
+             Product Brief        : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf
+             Application processor only
+             Core: ARMv7 compatible Sheeva PJ4 core
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. All the processors of
+      this MMP/MMP2 family were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the PXA family of SoCs listed above.
+
+   Linux kernel mach directory: arch/arm/mach-mmp
+   Linux kernel plat directory: arch/arm/plat-pxa
+
+Long-term plans
+---------------
+
+ * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and
+   mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the
+   Marvell EBU (Engineering Business Unit) in a single mach-<foo>
+   directory. The plat-orion/ would therefore disappear.
+
+ * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa
+   directory. The plat-pxa/ would therefore disappear.
+
+Credits
+-------
+
+ Maen Suleiman <maen@marvell.com>
+ Lior Amsalem <alior@marvell.com>
+ Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ Andrew Lunn <andrew@lunn.ch>
+ Nicolas Pitre <nico@fluxnic.net>
+ Eric Miao <eric.y.miao@gmail.com>

arch/arm/Kconfig

@@ -537,10 +537,11 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_V7
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_PCI
 	select PLAT_ORION
+	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
 

arch/arm/boot/dts/dove-cm-a510.dts

@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};

arch/arm/boot/dts/dove-cubox.dts

@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};

arch/arm/boot/dts/dove-dove-db.dts

@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};

arch/arm/boot/dts/dove.dtsi

@@ -0,0 +1,143 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>,
+		      <0xf1020214 0x04>;
+	};
+
+	mbus@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0 0xf1000000 0x4000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <7>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <8>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart2: serial@12200 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <9>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart3: serial@12300 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <10>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		wdt: wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+		};
+
+		gpio0: gpio@d0400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0400 0x20>;
+			ngpio = <32>;
+			interrupts = <12>, <13>, <14>, <60>;
+		};
+
+		gpio1: gpio@d0420 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0420 0x20>;
+			ngpio = <32>;
+			interrupts = <61>;
+		};
+
+		gpio2: gpio@e8400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xe8400 0x0c>;
+			ngpio = <8>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <6>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		spi1: spi@14600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <5>;
+			reg = <0x14600 0x28>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clock-frequency = <400000>;
+			timeout-ms = <1000>;
+			status = "disabled";
+		};
+
+		sdio0: sdio@92000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x92000 0x100>;
+			interrupts = <35>, <37>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@90000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x90000 0x100>;
+			interrupts = <36>, <38>;
+			status = "disabled";
+		};
+
+		sata0: sata@a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xa0000 0x2400>;
+			interrupts = <62>;
+			nr-ports = <1>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-dockstar.dts

@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -0,0 +1,105 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@400000 {
+				label = "uInitrd";
+				reg = <0x540000 0x1000000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 0>;
+			linux,default-trigger = "default-on";
+		};
+		health_led1 {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 0>;
+		};
+		health_led2 {
+			label = "status:white:health_led";
+			gpios = <&gpio1 4 0>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 0>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		Power {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio0 14 1>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-km_kirkwood.dts

@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "ok";
+			chip-delay = <25>;
+		};
+	};
+};

arch/arm/mach-dove/Kconfig

@@ -15,6 +15,13 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
+config MACH_DOVE_DT
+	bool "Marvell Dove Flattened Device Tree"
+	select USE_OF
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Dove using flattened device tree.
+
 endmenu
 
 endif

arch/arm/mach-dove/Makefile

@@ -1,4 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
-
+obj-y				+= common.o addr-map.o irq.o mpp.o
+obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o

arch/arm/mach-dove/Makefile.boot

@@ -1,3 +1,7 @@
    zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb
+dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb
+dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb

arch/arm/mach-dove/common.c

@@ -16,6 +16,8 @@
 #include <linux/clk-provider.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/timex.h>
@@ -24,6 +26,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/pci.h>
 #include <mach/dove.h>
+#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
@@ -33,8 +36,6 @@
 #include <plat/addr-map.h>
 #include "common.h"
 
-static int get_tclk(void);
-
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -60,14 +61,69 @@ void __init dove_map_io(void)
 /*****************************************************************************
  * CLK tree
  ****************************************************************************/
+static int dove_tclk;
+
+static DEFINE_SPINLOCK(gating_lock);
 static struct clk *tclk;
 
-static void __init clk_init(void)
+static struct clk __init *dove_register_gate(const char *name,
+					     const char *parent, u8 bit_idx)
 {
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       get_tclk());
+	return clk_register_gate(NULL, name, parent, 0,
+				 (void __iomem *)CLOCK_GATING_CONTROL,
+				 bit_idx, 0, &gating_lock);
+}
+
+static void __init dove_clk_init(void)
+{
+	struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
+	struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
+	struct clk *xor0, *xor1, *ge, *gephy;
 
-	orion_clkdev_init(tclk);
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       dove_tclk);
+
+	usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
+	usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);
+	sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA);
+	pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0);
+	pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1);
+	sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0);
+	sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1);
+	nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND);
+	camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA);
+	i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0);
+	i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1);
+	crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO);
+	ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97);
+	pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
+	xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
+	xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
+	gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
+	ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
+
+	orion_clkdev_add(NULL, "orion_spi.0", tclk);
+	orion_clkdev_add(NULL, "orion_spi.1", tclk);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
+	orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk);
+
+	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+	orion_clkdev_add(NULL, "orion-ehci.1", usb1);
+	orion_clkdev_add(NULL, "mv643xx_eth.0", ge);
+	orion_clkdev_add("0", "sata_mv.0", sata);
+	orion_clkdev_add("0", "pcie", pex0);
+	orion_clkdev_add("1", "pcie", pex1);
+	orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
+	orion_clkdev_add(NULL, "sdhci-dove.1", sdio1);
+	orion_clkdev_add(NULL, "orion_nand", nand);
+	orion_clkdev_add(NULL, "cafe1000-ccic.0", camera);
+	orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0);
+	orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1);
+	orion_clkdev_add(NULL, "mv_crypto", crypto);
+	orion_clkdev_add(NULL, "dove-ac97", ac97);
+	orion_clkdev_add(NULL, "dove-pdma", pdma);
+	orion_clkdev_add(NULL, "mv_xor_shared.0", xor0);
+	orion_clkdev_add(NULL, "mv_xor_shared.1", xor1);
 }
 
 /*****************************************************************************
@@ -178,22 +234,31 @@ void __init dove_init_early(void)
 	orion_time_set_base(TIMER_VIRT_BASE);
 }
 
-static int get_tclk(void)
+static int __init dove_find_tclk(void)
 {
-	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
 	return 166666667;
 }
 
 static void __init dove_timer_init(void)
 {
+	dove_tclk = dove_find_tclk();
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_DOVE_BRIDGE, get_tclk());
+			IRQ_DOVE_BRIDGE, dove_tclk);
 }
 
 struct sys_timer dove_timer = {
 	.init = dove_timer_init,
 };
 
+/*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+void __init dove_crypto_init(void)
+{
+	orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE,
+			  DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO);
+}
+
 /*****************************************************************************
  * XOR 0
  ****************************************************************************/
@@ -275,8 +340,8 @@ void __init dove_sdio1_init(void)
 
 void __init dove_init(void)
 {
-	printk(KERN_INFO "Dove 88AP510 SoC, ");
-	printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
+	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+		(dove_tclk + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
@@ -284,7 +349,7 @@ void __init dove_init(void)
 	dove_setup_cpu_mbus();
 
 	/* Setup root of clk tree */
-	clk_init();
+	dove_clk_init();
 
 	/* internal devices that every board has */
 	dove_rtc_init();
@@ -307,3 +372,67 @@ void dove_restart(char mode, const char *cmd)
 	while (1)
 		;
 }
+
+#if defined(CONFIG_MACH_DOVE_DT)
+/*
+ * Auxdata required until real OF clock provider
+ */
+struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
+	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+		       NULL),
+	OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
+	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
+	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
+	{},
+};
+
+static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static void __init dove_dt_init(void)
+{
+	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+		(dove_tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init();
+#endif
+	dove_setup_cpu_mbus();
+
+	/* Setup root of clk tree */
+	dove_clk_init();
+
+	/* Internal devices not ported to DT yet */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+
+	dove_ge00_init(&dove_dt_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_pcie_init(1, 1);
+	dove_crypto_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     dove_auxdata_lookup, NULL);
+}
+
+static const char * const dove_dt_board_compat[] = {
+	"marvell,dove",
+	NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
+	.map_io		= dove_map_io,
+	.init_early	= dove_init_early,
+	.init_irq	= orion_dt_init_irq,
+	.timer		= &dove_timer,
+	.init_machine	= dove_dt_init,
+	.restart	= dove_restart,
+	.dt_compat	= dove_dt_board_compat,
+MACHINE_END
+#endif

arch/arm/mach-dove/common.h

@@ -26,7 +26,11 @@ void dove_init_irq(void);
 void dove_setup_cpu_mbus(void);
 void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void dove_sata_init(struct mv_sata_platform_data *sata_data);
+#ifdef CONFIG_PCI
 void dove_pcie_init(int init_port0, int init_port1);
+#else
+static inline void dove_pcie_init(int init_port0, int init_port1) { }
+#endif
 void dove_ehci0_init(void);
 void dove_ehci1_init(void);
 void dove_uart0_init(void);

arch/arm/mach-dove/include/mach/pm.h

@@ -13,24 +13,42 @@
 #include <mach/irqs.h>
 
 #define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
-#define  CLOCK_GATING_USB0_MASK		(1 << 0)
-#define  CLOCK_GATING_USB1_MASK		(1 << 1)
-#define  CLOCK_GATING_GBE_MASK		(1 << 2)
-#define  CLOCK_GATING_SATA_MASK		(1 << 3)
-#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
-#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
-#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
-#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
-#define  CLOCK_GATING_NAND_MASK		(1 << 10)
-#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
-#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
-#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
-#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
-#define  CLOCK_GATING_AC97_MASK		(1 << 21)
-#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
-#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
-#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
-#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+#define  CLOCK_GATING_BIT_USB0		0
+#define  CLOCK_GATING_BIT_USB1		1
+#define  CLOCK_GATING_BIT_GBE		2
+#define  CLOCK_GATING_BIT_SATA		3
+#define  CLOCK_GATING_BIT_PCIE0		4
+#define  CLOCK_GATING_BIT_PCIE1		5
+#define  CLOCK_GATING_BIT_SDIO0		8
+#define  CLOCK_GATING_BIT_SDIO1		9
+#define  CLOCK_GATING_BIT_NAND		10
+#define  CLOCK_GATING_BIT_CAMERA	11
+#define  CLOCK_GATING_BIT_I2S0		12
+#define  CLOCK_GATING_BIT_I2S1		13
+#define  CLOCK_GATING_BIT_CRYPTO	15
+#define  CLOCK_GATING_BIT_AC97		21
+#define  CLOCK_GATING_BIT_PDMA		22
+#define  CLOCK_GATING_BIT_XOR0		23
+#define  CLOCK_GATING_BIT_XOR1		24
+#define  CLOCK_GATING_BIT_GIGA_PHY	30
+#define  CLOCK_GATING_USB0_MASK		(1 << CLOCK_GATING_BIT_USB0)
+#define  CLOCK_GATING_USB1_MASK		(1 << CLOCK_GATING_BIT_USB1)
+#define  CLOCK_GATING_GBE_MASK		(1 << CLOCK_GATING_BIT_GBE)
+#define  CLOCK_GATING_SATA_MASK		(1 << CLOCK_GATING_BIT_SATA)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << CLOCK_GATING_BIT_PCIE0)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << CLOCK_GATING_BIT_PCIE1)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << CLOCK_GATING_BIT_SDIO0)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << CLOCK_GATING_BIT_SDIO1)
+#define  CLOCK_GATING_NAND_MASK		(1 << CLOCK_GATING_BIT_NAND)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << CLOCK_GATING_BIT_CAMERA)
+#define  CLOCK_GATING_I2S0_MASK		(1 << CLOCK_GATING_BIT_I2S0)
+#define  CLOCK_GATING_I2S1_MASK		(1 << CLOCK_GATING_BIT_I2S1)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << CLOCK_GATING_BIT_CRYPTO)
+#define  CLOCK_GATING_AC97_MASK		(1 << CLOCK_GATING_BIT_AC97)
+#define  CLOCK_GATING_PDMA_MASK		(1 << CLOCK_GATING_BIT_PDMA)
+#define  CLOCK_GATING_XOR0_MASK		(1 << CLOCK_GATING_BIT_XOR0)
+#define  CLOCK_GATING_XOR1_MASK		(1 << CLOCK_GATING_BIT_XOR1)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << CLOCK_GATING_BIT_GIGA_PHY)
 
 #define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
 #define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)

arch/arm/mach-kirkwood/Kconfig

@@ -94,6 +94,13 @@ config MACH_TS219_DT
 	  or MV6282. If you have the wrong one, the buttons will not
 	  work.
 
+config MACH_DOCKSTAR_DT
+	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent Dockstar (Flattened Device Tree).
+
 config MACH_GOFLEXNET_DT
 	bool "Seagate GoFlex Net (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -109,6 +116,20 @@ config MACH_LSXL_DT
 	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
 	  Flattened Device Tree.
 
+config MACH_IOMEGA_IX2_200_DT
+	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Iomega StorCenter ix2-200 (Flattened Device Tree).
+
+config MACH_KM_KIRKWOOD_DT
+	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help

arch/arm/mach-kirkwood/Makefile

@@ -26,5 +26,8 @@ obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
 obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
 obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
+obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
+obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o

arch/arm/mach-kirkwood/Makefile.boot

@@ -1,3 +1,7 @@
    zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb
+dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb
+dtb-$(CONFIG_MACH_KM_KIRKWOOD_DT) += kirkwood-km_kirkwood.dtb

arch/arm/mach-kirkwood/board-dockstar.c

@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+void __init dockstar_dt_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		pr_err("can't setup GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+}

arch/arm/mach-kirkwood/board-dt.c

@@ -81,12 +81,21 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("qnap,ts219"))
 		qnap_dt_ts219_init();
 
+	if (of_machine_is_compatible("seagate,dockstar"))
+		dockstar_dt_init();
+
 	if (of_machine_is_compatible("seagate,goflexnet"))
 		goflexnet_init();
 
 	if (of_machine_is_compatible("buffalo,lsxl"))
 		lsxl_init();
 
+	if (of_machine_is_compatible("iom,ix2-200"))
+		iomega_ix2_200_init();
+
+	if (of_machine_is_compatible("keymile,km_kirkwood"))
+		km_kirkwood_init();
+
 	of_platform_populate(NULL, kirkwood_dt_match_table,
 			     kirkwood_auxdata_lookup, NULL);
 }
@@ -98,8 +107,11 @@ static const char *kirkwood_dt_board_compat[] = {
 	"iom,iconnect",
 	"raidsonic,ib-nas62x0",
 	"qnap,ts219",
+	"seagate,dockstar",
 	"seagate,goflexnet",
 	"buffalo,lsxl",
+	"iom,ix2-200",
+	"keymile,km_kirkwood",
 	NULL
 };
 

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+ *
+ * Iomega StorCenter ix2-200
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
+	.phy_addr       = MV643XX_ETH_PHY_NONE,
+	.speed          = SPEED_1000,
+	.duplex         = DUPLEX_FULL,
+};
+
+static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
+	MPP12_GPIO,			/* Reset Button */
+	MPP14_GPIO,			/* Power Button */
+	MPP15_GPIO,			/* Backup LED (blue) */
+	MPP16_GPIO,			/* Power LED (white) */
+	MPP35_GPIO,			/* OTB Button */
+	MPP36_GPIO,			/* Rebuild LED (white) */
+	MPP37_GPIO,			/* Health LED (red) */
+	MPP38_GPIO,			/* SATA LED brightness control 1 */
+	MPP39_GPIO,			/* SATA LED brightness control 2 */
+	MPP40_GPIO,			/* Backup LED brightness control 1 */
+	MPP41_GPIO,			/* Backup LED brightness control 2 */
+	MPP42_GPIO,			/* Power LED brightness control 1 */
+	MPP43_GPIO,			/* Power LED brightness control 2 */
+	MPP44_GPIO,			/* Health LED brightness control 1 */
+	MPP45_GPIO,			/* Health LED brightness control 2 */
+	MPP46_GPIO,			/* Rebuild LED brightness control 1 */
+	MPP47_GPIO,			/* Rebuild LED brightness control 2 */
+	0
+};
+
+void __init iomega_ix2_200_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+}

arch/arm/mach-kirkwood/board-km_kirkwood.c

@@ -0,0 +1,57 @@
+/*
+ * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * arch/arm/mach-kirkwood/board-km_kirkwood.c
+ *
+ * Keymile km_kirkwood Reference Desing Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int km_kirkwood_mpp_config[] __initdata = {
+	MPP8_GPIO,	/* I2C SDA */
+	MPP9_GPIO,	/* I2C SCL */
+	0
+};
+
+void __init km_kirkwood_init(void)
+{
+	struct clk *sata_clk;
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(km_kirkwood_mpp_config);
+
+	/*
+	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
+	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
+	 * devices are also not present in this variant, their clocks get
+	 * disabled because unused when clk_disable_unused() gets called.
+	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
+	 */
+	sata_clk = clk_get_sys("sata_mv.0", "0");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+	sata_clk = clk_get_sys("sata_mv.0", "1");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&km_kirkwood_ge00_data);
+}

arch/arm/mach-kirkwood/common.h

@@ -82,6 +82,12 @@ void ib62x0_init(void);
 static inline void ib62x0_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_dt_init(void);
+#else
+static inline void dockstar_dt_init(void) {};
+#endif
+
 #ifdef CONFIG_MACH_GOFLEXNET_DT
 void goflexnet_init(void);
 #else
@@ -94,6 +100,18 @@ void lsxl_init(void);
 static inline void lsxl_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
+void iomega_ix2_200_init(void);
+#else
+static inline void iomega_ix2_200_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
+void km_kirkwood_init(void);
+#else
+static inline void km_kirkwood_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);