drm/radeon/kms: clean HDMI definitions

We already know same offsets are used for different encoders/transmitters, so
just numeric them instead naming incorrectly. Additionaly we found additional
registers needed for RV770+

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/radeon/r600_hdmi.c

@@ -470,27 +470,27 @@ void r600_hdmi_init(struct drm_encoder *encoder)
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-		radeon_encoder->hdmi_offset = R600_HDMI_TMDS1;
+		radeon_encoder->hdmi_offset = R600_HDMI_BLOCK1;
 		break;
 
 	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
 		switch (r600_audio_tmds_index(encoder)) {
 		case 0:
-			radeon_encoder->hdmi_offset = R600_HDMI_TMDS1;
+			radeon_encoder->hdmi_offset = R600_HDMI_BLOCK1;
 			break;
 		case 1:
-			radeon_encoder->hdmi_offset = R600_HDMI_TMDS2;
+			radeon_encoder->hdmi_offset = R600_HDMI_BLOCK2;
 			break;
 		default:
 			radeon_encoder->hdmi_offset = 0;
 			break;
 		}
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-		radeon_encoder->hdmi_offset = R600_HDMI_TMDS2;
+		radeon_encoder->hdmi_offset = R600_HDMI_BLOCK2;
 		break;
 
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		radeon_encoder->hdmi_offset = R600_HDMI_DIG;
+		radeon_encoder->hdmi_offset = R600_HDMI_BLOCK3;
 		break;
 
 	default:

drivers/gpu/drm/radeon/r600_reg.h

@@ -152,9 +152,9 @@
 #define R600_AUDIO_STATUS_BITS            0x73d8
 
 /* HDMI base register addresses */
-#define R600_HDMI_TMDS1                   0x7400
-#define R600_HDMI_TMDS2                   0x7700
-#define R600_HDMI_DIG                     0x7800
+#define R600_HDMI_BLOCK1                  0x7400
+#define R600_HDMI_BLOCK2                  0x7700
+#define R600_HDMI_BLOCK3                  0x7800
 
 /* HDMI registers */
 #define R600_HDMI_ENABLE           0x00
@@ -185,4 +185,8 @@
 #define R600_HDMI_AUDIO_DEBUG_2    0xe8
 #define R600_HDMI_AUDIO_DEBUG_3    0xec
 
+/* HDMI additional config base register addresses */
+#define R600_HDMI_CONFIG1                 0x7600
+#define R600_HDMI_CONFIG2                 0x7a00
+
 #endif

drivers/gpu/drm/radeon/radeon_mode.h

@@ -345,6 +345,7 @@ struct radeon_encoder {
 	struct drm_display_mode native_mode;
 	void *enc_priv;
 	int hdmi_offset;
+	int hdmi_config_offset;
 	int hdmi_audio_workaround;
 	int hdmi_buffer_status;
 };