Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

Documentation/feature-removal-schedule.txt

@@ -149,3 +149,13 @@ Files:	drivers/md/md.c
 Why:	Not reliable by design - can fail when most needed.
 	Alternatives exist
 Who:	NeilBrown <neilb@suse.de>
+
+---------------------------
+
+What:	au1x00_uart driver
+When:	January 2006
+Why:	The 8250 serial driver now has the ability to deal with the differences
+	between the standard 8250 family of UARTs and their slightly strange
+	brother on Alchemy SOCs.  The loss of features is not considered an
+	issue.
+Who:	Ralf Baechle <ralf@linux-mips.org>

arch/mips/Makefile

@@ -700,6 +700,7 @@ load-$(CONFIG_SNI_RM200_PCI)	+= 0xffffffff80600000
 #
 core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/jmr3927/rbhma3100/ \
 				   arch/mips/jmr3927/common/
+cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
 load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
 
 #

arch/mips/au1000/common/setup.c

@@ -93,7 +93,7 @@ void __init plat_setup(void)
 
 	argptr = prom_getcmdline();
 
-#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
+#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
 	if ((argptr = strstr(argptr, "console=")) == NULL) {
 		argptr = prom_getcmdline();
 		strcat(argptr, " console=ttyS0,115200");

arch/mips/configs/atlas_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:13 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 12:14:02 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -191,6 +209,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -309,6 +328,10 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -363,6 +386,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -412,6 +436,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -472,10 +497,18 @@ CONFIG_IPDDP_DECAP=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -488,8 +521,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -498,13 +533,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -565,18 +601,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -643,6 +670,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -653,6 +681,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -707,6 +736,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -736,7 +766,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -754,6 +783,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -933,6 +963,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -991,6 +1022,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -1037,7 +1072,7 @@ CONFIG_JFS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set

arch/mips/configs/bigsur_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:17 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:04:36 2005
 #
 CONFIG_MIPS=y
 
@@ -60,6 +60,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -127,8 +144,8 @@ CONFIG_SIBYTE_SB1xxx_SOC=y
 # CONFIG_CPU_SB1_PASS_2_112x is not set
 # CONFIG_CPU_SB1_PASS_3 is not set
 # CONFIG_SIMULATION is not set
-# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_CONFIG_SB1_CERR_STALL is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
 CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
@@ -198,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 CONFIG_PREEMPT_NONE=y
@@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -353,14 +375,6 @@ CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -443,6 +457,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -582,6 +597,7 @@ CONFIG_GEN_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -634,6 +650,7 @@ CONFIG_SENSORS_PCA9539=y
 CONFIG_SENSORS_PCF8591=y
 CONFIG_SENSORS_RTC8564=y
 CONFIG_SENSORS_MAX6875=y
+# CONFIG_RTC_X1205_I2C is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
@@ -685,6 +702,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -823,6 +844,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set

arch/mips/configs/capcella_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:20 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:04:39 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -270,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -329,16 +352,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -412,7 +426,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -430,6 +443,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -586,6 +600,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -601,6 +616,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -659,6 +675,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/cobalt_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:23 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:04:42 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -172,6 +190,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -316,18 +340,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -401,7 +416,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -419,6 +433,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -574,6 +589,7 @@ CONFIG_COBALT_LCD=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -632,6 +648,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/db1000_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:26 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:04 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -201,7 +220,6 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 
 #
@@ -259,15 +277,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -293,6 +315,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -343,6 +369,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -399,6 +426,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -417,18 +449,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -473,7 +496,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -490,6 +512,7 @@ CONFIG_CICADA_PHY=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -532,6 +555,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -598,13 +622,17 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -633,11 +661,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -696,6 +727,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/db1100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:29 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:07 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -247,15 +266,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -281,6 +304,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -331,6 +358,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -387,6 +415,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -405,18 +438,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -461,7 +485,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -478,6 +501,7 @@ CONFIG_CICADA_PHY=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -507,6 +531,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -573,13 +598,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -608,6 +636,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -650,12 +679,11 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_AU1100=y
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1100=y
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -664,6 +692,7 @@ CONFIG_FB_AU1100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -697,6 +726,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/db1200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:32 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:10 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -200,7 +219,6 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
 
 #
@@ -255,13 +273,17 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -287,6 +309,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -333,6 +359,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -394,6 +421,11 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -414,16 +446,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -495,6 +518,7 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -545,6 +569,7 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -638,13 +663,17 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -673,11 +702,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -720,12 +752,11 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_AU1200=y
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1200=y
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -756,6 +787,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -862,6 +897,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y

arch/mips/configs/db1500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:36 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:15 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -208,7 +227,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
 
 #
@@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -432,18 +464,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -518,7 +541,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -537,7 +559,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -599,6 +623,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -664,13 +689,17 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -702,12 +731,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -756,12 +788,94 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA MIPS devices
+#
+CONFIG_SND_AU1X00=m
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
 
 #
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
+CONFIG_OBSOLETE_OSS_DRIVER=y
 # CONFIG_SOUND_BT878 is not set
 # CONFIG_SOUND_CMPCI is not set
 # CONFIG_SOUND_EMU10K1 is not set
@@ -774,7 +888,7 @@ CONFIG_SOUND_PRIME=y
 # CONFIG_SOUND_MAESTRO3 is not set
 # CONFIG_SOUND_ICH is not set
 # CONFIG_SOUND_SONICVIBES is not set
-CONFIG_SOUND_AU1000=y
+# CONFIG_SOUND_AU1000 is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
@@ -815,12 +929,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 

arch/mips/configs/db1550_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:39 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:18 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
 
 #
@@ -266,15 +284,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -300,6 +322,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -350,6 +376,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -412,6 +439,11 @@ CONFIG_MTD_NAND_AU1550=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -435,18 +467,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -550,7 +573,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -569,7 +591,9 @@ CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -639,6 +663,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -704,13 +729,17 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -742,12 +771,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -800,6 +832,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ddb5476_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:42 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:04 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -261,6 +280,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -292,6 +315,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -321,18 +345,9 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -412,7 +427,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -430,6 +444,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -443,7 +458,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -591,6 +605,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -633,7 +648,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
@@ -642,6 +656,7 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -658,7 +673,6 @@ CONFIG_FB=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -687,6 +701,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ddb5477_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:45 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:08 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -260,6 +279,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -291,6 +314,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -382,7 +397,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -400,6 +414,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -575,6 +590,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -633,6 +649,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/decstation_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:48 2005
+# Linux kernel version: 2.6.14
+# Fri Nov 11 13:29:30 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -318,16 +341,7 @@ CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -365,12 +379,13 @@ CONFIG_SCSI_CONSTANTS=y
 #
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_SCSI_DECNCR=y
 # CONFIG_SCSI_DECSII is not set
 # CONFIG_SCSI_SATA is not set
@@ -407,7 +422,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -491,10 +505,7 @@ CONFIG_ZS=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_DZ=y
-CONFIG_SERIAL_DZ_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_DZ is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -520,6 +531,7 @@ CONFIG_RTC=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -562,15 +574,14 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_PMAG_AA is not set
 CONFIG_FB_PMAG_BA=y
 CONFIG_FB_PMAGB_B=y
 # CONFIG_FB_MAXINE is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -594,6 +605,10 @@ CONFIG_LOGO_DEC_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -746,6 +761,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set

arch/mips/configs/e55_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:51 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:15 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -317,16 +340,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -403,7 +417,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -427,7 +440,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -552,6 +564,7 @@ CONFIG_WATCHDOG=y
 # CONFIG_WDT is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -564,6 +577,7 @@ CONFIG_GPIO_VR41XX=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -622,6 +636,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ev64120_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:54 2005
+# Linux kernel version: 2.6.14
+# Wed Nov  9 11:05:12 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_KMOD is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -326,18 +349,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -389,7 +403,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -407,6 +420,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -464,6 +478,7 @@ CONFIG_PPP_ASYNC=y
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -569,6 +584,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -627,6 +643,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ev96100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:57 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:22 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_KMOD is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -185,6 +203,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -269,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -323,18 +346,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -379,7 +393,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -518,6 +531,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -575,6 +589,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ip22_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:01 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:38:41 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -599,7 +627,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -820,6 +848,10 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set

arch/mips/configs/ip27_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:04 2005
+# Linux kernel version: 2.6.15-rc1
+# Sun Nov 13 23:56:52 2005
 #
 CONFIG_MIPS=y
 
@@ -59,6 +59,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -186,6 +203,7 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=64
 CONFIG_PREEMPT_NONE=y
@@ -284,10 +302,18 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -300,8 +326,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -310,12 +338,13 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -377,14 +406,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -428,6 +449,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -437,6 +459,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -447,7 +470,6 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLOGIC_1280_1040=y
 CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA21XX is not set
 # CONFIG_SCSI_QLA22XX is not set
@@ -487,6 +509,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -516,7 +539,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -532,8 +554,12 @@ CONFIG_CICADA_PHY=m
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_SGI_IOC3_ETH=y
+CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
+CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -672,6 +698,7 @@ CONFIG_SGI_IP27_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -724,6 +751,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -762,7 +793,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set

arch/mips/configs/ip32_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:07 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:32 2005
 #
 CONFIG_MIPS=y
 
@@ -51,6 +51,23 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -271,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -302,6 +324,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -334,14 +357,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -385,6 +400,7 @@ CONFIG_SCSI_SAS_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -399,6 +415,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -432,6 +449,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -461,7 +479,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -480,6 +497,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -637,6 +655,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -695,6 +714,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/it8172_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:09 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:42:45 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -266,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -315,6 +338,7 @@ CONFIG_MTD_CHAR=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -372,6 +396,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -390,18 +419,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -467,7 +487,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -609,6 +628,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -669,10 +689,10 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
 CONFIG_SOUND_IT8172=y
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_AD1980 is not set
 
 #
 # USB support
@@ -680,6 +700,10 @@ CONFIG_SOUND_IT8172=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ivr_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:12 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:38 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -324,18 +347,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -409,7 +423,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -427,6 +440,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -539,7 +553,8 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_QTRONIX_KEYBOARD=y
-# CONFIG_IT8172_SCR0 is not set
+CONFIG_IT8172_SCR0=y
+CONFIG_IT8172_SCR1=y
 
 #
 # Serial drivers
@@ -583,6 +598,7 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -641,6 +657,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/jaguar-atx_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:14 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:41 2005
 #
 CONFIG_MIPS=y
 
@@ -54,6 +54,24 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -184,6 +202,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
@@ -259,6 +278,10 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -317,18 +340,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -380,7 +394,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -398,6 +411,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -591,6 +605,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/jmr3927_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:17 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:44 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -168,6 +186,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -315,18 +339,9 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -378,7 +393,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -396,6 +410,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -561,6 +576,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -603,7 +619,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
@@ -612,6 +627,7 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -628,7 +644,6 @@ CONFIG_FB=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -656,6 +671,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/lasat200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:19 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:47 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -317,6 +340,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -374,6 +398,11 @@ CONFIG_MTD_LASAT=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -396,18 +425,9 @@ CONFIG_MTD_LASAT=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -511,7 +531,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -529,6 +548,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -684,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -742,6 +763,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/malta_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:22 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:42:55 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -197,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -315,6 +334,10 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -369,6 +392,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -418,6 +442,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -478,10 +503,18 @@ CONFIG_IPDDP_DECAP=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -494,8 +527,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -504,13 +539,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -572,18 +608,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -680,6 +707,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
 CONFIG_SCSI_3W_9XXX=m
 CONFIG_SCSI_ACARD=m
@@ -695,6 +723,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -745,6 +774,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -774,7 +804,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -792,6 +821,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -967,6 +997,7 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1025,6 +1056,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -1071,7 +1106,7 @@ CONFIG_JFS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set

arch/mips/configs/mipssim_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:25 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:55 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -281,10 +300,18 @@ CONFIG_SCTP_HMAC_MD5=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -297,8 +324,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -311,6 +340,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_POLICE is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -361,16 +391,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -537,6 +558,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -588,6 +610,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -721,6 +747,8 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
 # CONFIG_DEBUG_STACK_USAGE is not set

arch/mips/configs/mpc30x_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:28 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:12:01 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -210,7 +229,6 @@ CONFIG_PCMCIA_IOCTL=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_VRC4173=y
 
 #
@@ -281,6 +299,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -341,16 +363,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -612,6 +625,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -625,6 +639,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
@@ -632,6 +648,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -713,12 +730,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 

arch/mips/configs/ocelot_3_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:30 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:01:36 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
@@ -265,15 +284,19 @@ CONFIG_IPV6=m
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -365,16 +392,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -411,12 +429,13 @@ CONFIG_SCSI_PROC_FS=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -427,6 +446,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -461,6 +481,7 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -490,7 +511,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -508,6 +528,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -589,6 +610,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -691,6 +713,7 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -733,7 +756,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
@@ -742,6 +764,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -758,7 +781,6 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -767,6 +789,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -792,6 +815,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ocelot_c_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:33 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:05 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,23 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -176,6 +193,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -267,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -298,6 +320,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -329,14 +352,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -388,7 +403,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -406,6 +420,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -562,6 +577,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -620,6 +636,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ocelot_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:35 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:08 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -296,6 +319,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -375,7 +390,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -513,6 +527,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -570,6 +585,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ocelot_g_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:38 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:11 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,23 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -270,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -301,6 +323,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -332,14 +355,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -391,7 +406,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -410,6 +424,7 @@ CONFIG_MII=y
 CONFIG_GALILEO_64240_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -565,6 +580,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -623,6 +639,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/pb1100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:41 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:12:31 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -203,7 +222,6 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 
 #
@@ -261,15 +279,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -295,6 +317,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -345,6 +371,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -401,6 +428,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -419,18 +451,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -475,7 +498,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -492,6 +514,7 @@ CONFIG_CICADA_PHY=m
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -526,6 +549,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -592,12 +616,19 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -624,11 +655,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -687,6 +721,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/pb1500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:44 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:14:25 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 CONFIG_PD6729=m
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 CONFIG_PCCARD_NONSTATIC=m
 
@@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -565,7 +587,9 @@ CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -635,6 +659,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -700,13 +725,17 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -738,12 +767,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -796,6 +828,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/pb1550_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:47 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:15:34 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 CONFIG_PD6729=m
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 CONFIG_PCCARD_NONSTATIC=m
 
@@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -565,7 +587,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -627,6 +651,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -692,13 +717,17 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -730,12 +759,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -788,6 +820,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/pnx8550-jbs_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:50 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:25 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -325,16 +348,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -423,12 +437,13 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -439,6 +454,7 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -473,6 +489,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -510,6 +527,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -681,6 +699,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -763,12 +782,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1039,6 +1061,8 @@ CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1055,7 +1079,31 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1067,4 +1115,4 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m

arch/mips/configs/pnx8550-v2pci_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:53 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:38 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -255,13 +274,17 @@ CONFIG_IPV6=m
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -293,6 +316,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -352,16 +379,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -451,12 +469,13 @@ CONFIG_BLK_DEV_SD=y
 #
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -472,6 +491,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -506,6 +526,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -543,6 +564,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -622,6 +644,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -746,6 +769,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -796,6 +820,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -872,7 +897,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
@@ -881,6 +905,7 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -897,7 +922,6 @@ CONFIG_FB=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -946,12 +970,15 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1235,7 +1262,31 @@ CONFIG_CMDLINE=""
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1247,6 +1298,6 @@ CONFIG_CMDLINE=""
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m

arch/mips/configs/qemu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:56 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:31 2005
 #
 CONFIG_MIPS=y
 
@@ -49,6 +49,24 @@ CONFIG_BASE_SMALL=1
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
 #
 # Machine selection
 #
@@ -168,6 +186,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -234,6 +253,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -265,6 +288,7 @@ CONFIG_STANDALONE=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -289,16 +313,7 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -353,7 +368,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -385,7 +399,6 @@ CONFIG_NET_ISA=y
 # CONFIG_ETH16I is not set
 CONFIG_NE2000=y
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -557,6 +570,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/rbhma4500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:59 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:45 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -188,6 +206,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -265,15 +284,19 @@ CONFIG_IPV6=m
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -355,6 +382,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -411,6 +439,11 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -438,16 +471,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -556,7 +580,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -574,6 +597,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -619,7 +643,6 @@ CONFIG_NET_PCI=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_LAN_SAA9730 is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -668,7 +691,6 @@ CONFIG_NET_RADIO=y
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW_DEBUG is not set
 CONFIG_IPW2200=m
-# CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
 
@@ -692,6 +714,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -804,6 +827,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -847,7 +871,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
@@ -856,6 +879,7 @@ CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -876,7 +900,6 @@ CONFIG_FB_ATY_CT=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -926,12 +949,15 @@ CONFIG_USB=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 
@@ -1106,6 +1132,7 @@ CONFIG_RELAYFS_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y

arch/mips/configs/rm200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:03 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:50 2005
 #
 CONFIG_MIPS=y
 
@@ -58,6 +58,24 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -190,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -272,6 +291,10 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -325,6 +348,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -374,6 +398,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -430,10 +455,18 @@ CONFIG_DECNET=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -446,8 +479,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -456,13 +491,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -583,18 +619,9 @@ CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -638,6 +665,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -651,6 +679,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_MEGARAID_NEWGEN=y
 CONFIG_MEGARAID_MM=m
 CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
@@ -723,6 +752,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -752,7 +782,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -770,6 +799,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -984,6 +1014,7 @@ CONFIG_RTC=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1074,12 +1105,15 @@ CONFIG_USB_UHCI_HCD=m
 #
 # USB Device Class drivers
 #
-CONFIG_USB_BLUETOOTH_TTY=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1196,6 +1230,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
@@ -1271,7 +1306,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set

arch/mips/configs/sb1250-swarm_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:05 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:43 2005
 #
 CONFIG_MIPS=y
 
@@ -58,6 +58,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -126,8 +143,8 @@ CONFIG_CPU_SB1_PASS_1=y
 # CONFIG_CPU_SB1_PASS_3 is not set
 CONFIG_SIBYTE_HAS_LDT=y
 # CONFIG_SIMULATION is not set
-# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_CONFIG_SB1_CERR_STALL is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
 CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
@@ -200,6 +217,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT_NONE=y
@@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -359,14 +381,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -441,7 +455,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -459,6 +472,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -599,6 +613,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -651,6 +666,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/sead_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:07 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:45 2005
 #
 CONFIG_MIPS=y
 
@@ -47,6 +47,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -242,17 +261,8 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=18432
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
 #
 # ATA/ATAPI/MFM/RLL support
 #
@@ -353,6 +363,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -403,6 +414,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/tb0226_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:10 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:49 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -277,6 +296,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -339,16 +362,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -385,12 +399,13 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -401,6 +416,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -435,6 +451,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -464,7 +481,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -482,6 +498,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -634,6 +651,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -650,6 +668,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -733,12 +752,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set

arch/mips/configs/tb0229_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:13 2005
+# Linux kernel version: 2.6.14
+# Wed Nov  9 11:11:47 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -278,6 +297,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -341,18 +364,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -404,7 +418,6 @@ CONFIG_DUMMY=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -422,6 +435,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -504,6 +518,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
@@ -589,6 +604,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -605,6 +621,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -688,12 +705,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 

arch/mips/configs/workpad_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:16 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:17:02 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -273,6 +292,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -328,16 +351,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -415,7 +429,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -439,7 +452,6 @@ CONFIG_MII=m
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -577,6 +589,7 @@ CONFIG_WATCHDOG=y
 # CONFIG_WDT is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -588,12 +601,15 @@ CONFIG_WATCHDOG=y
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_GPIO_VR41XX is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -652,6 +668,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/yosemite_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:18 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:59 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -181,6 +199,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT_NONE=y
@@ -260,6 +279,10 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -319,18 +342,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -382,7 +396,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -400,6 +413,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -575,6 +589,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -690,6 +708,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set

arch/mips/ddb5xxx/ddb5477/lcd44780.c

@@ -55,7 +55,7 @@ void lcd44780_data(unsigned char c)
 
 void lcd44780_puts(const char* s)
 {
-	int i,j;
+	int j;
 	int pos = 0;
 
 	lcd44780_command(LCD44780_CLEAR);
@@ -76,8 +76,12 @@ void lcd44780_puts(const char* s)
 		}
 	}
 #ifdef LCD44780_PUTS_PAUSE
-	for(i = 1; i < 2000; i++)
-		lcd44780_wait();
+	{
+		int i;
+
+		for(i = 1; i < 2000; i++)
+			lcd44780_wait();
+	}
 #endif
 }
 

arch/mips/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:09 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 12:13:58 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -599,7 +627,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -820,6 +848,10 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set

arch/mips/jmr3927/common/rtc_ds1742.c

@@ -41,11 +41,11 @@
 #include <linux/types.h>
 #include <linux/time.h>
 #include <linux/rtc.h>
+#include <linux/ds1742rtc.h>
 
 #include <asm/time.h>
 #include <asm/addrspace.h>
 
-#include <asm/jmr3927/ds1742rtc.h>
 #include <asm/debug.h>
 
 #define	EPOCH		2000

arch/mips/jmr3927/rbhma3100/setup.c

@@ -357,7 +357,7 @@ static void __init jmr3927_board_init(void)
 		       jmr3927_io_dipsw());
 }
 
-void __init plat_setup(void)
+void __init tx3927_setup(void)
 {
 	int i;
 

arch/mips/mips-boards/sead/sead_int.c

@@ -30,19 +30,9 @@
 
 extern asmlinkage void mipsIRQ(void);
 
-asmlinkage void sead_hw0_irqdispatch(struct pt_regs *regs)
-{
-	do_IRQ(SEADINT_UART0, regs);
-}
-
-asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs)
-{
-	do_IRQ(SEADINT_UART1, regs);
-}
-
 void __init arch_init_irq(void)
 {
-	mips_cpu_irq_init(0);
+	mips_cpu_irq_init(MIPSCPU_INT_BASE);
 
 	/* Now safe to set the exception vector. */
 	set_except_vector(0, mipsIRQ);

arch/mips/mips-boards/sead/sead_setup.c

@@ -45,7 +45,7 @@ const char *get_system_type(void)
 	return "MIPS SEAD";
 }
 
-static void __init sead_setup(void)
+void __init plat_setup(void)
 {
 	ioport_resource.end = 0x7fffffff;
 
@@ -69,7 +69,7 @@ static void __init serial_init(void)
 #else
 	s.iobase = SEAD_UART0_REGS_BASE+3;
 #endif
-	s.irq = SEADINT_UART0;
+	s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
 	s.uartclk = SEAD_BASE_BAUD * 16;
 	s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	s.iotype = 0;

arch/mips/momentum/ocelot_g/gt-irq.c

@@ -178,7 +178,7 @@ void gt64240_time_init(void)
 	timer.name = "timer";
 	timer.dev_id = NULL;
 	timer.next = NULL;
-	timer.mask = 0;
+	timer.mask = CPU_MASK_NONE;
 	irq_desc[6].action = &timer;
 
 	enable_irq(6);

arch/mips/pci/Makefile

@@ -15,7 +15,7 @@ obj-$(CONFIG_MIPS_GT96100)	+= ops-gt96100.o
 obj-$(CONFIG_PCI_MARVELL)	+= ops-marvell.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
-obj-$(CONFIG_MIPS_TX3927)	+= ops-jmr3927.o
+obj-$(CONFIG_MIPS_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
 

arch/mips/pci/ops-tx3927.c

@@ -72,13 +72,9 @@ static inline int check_abort(void)
 static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret, busno;
+	int ret;
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		busno = bus->number;
-
-	ret = mkaddr(busno, devfn, where);
+	ret = mkaddr(bus->number, devfn, where);
 	if (ret)
 		return ret;
 
@@ -102,15 +98,9 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret, busno;
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		bus = bus->number;
-	else
-		bus = 0;
+	int ret;
 
-	ret = mkaddr(busno, devfn, where);
+	ret = mkaddr(bus->number, devfn, where);
 	if (ret)
 		return ret;
 
@@ -120,7 +110,7 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		break;
 
 	case 2:
-		*(volatile u16 *) (unsigned longulong) & tx3927_pcicptr->icd | (where & 2)) =
+		*(volatile u16 *) ((unsigned long) & tx3927_pcicptr->icd | (where & 2)) =
 	    cpu_to_le16(val);
 		break;
 
@@ -137,8 +127,8 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 }
 
 struct pci_ops jmr3927_pci_ops = {
-	jmr3927_pcibios_read_config,
-	jmr3927_pcibios_write_config,
+	jmr3927_pci_read_config,
+	jmr3927_pci_write_config,
 };
 
 
@@ -159,15 +149,14 @@ unsigned long tc_readl(volatile __u32 * addr)
 {
 	unsigned long val;
 
-	addr = PHYSADDR(addr);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
+	    (unsigned long) CPHYSADDR(addr);
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	/* clear by setting */
 	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
@@ -176,12 +165,11 @@ unsigned long tc_readl(volatile __u32 * addr)
 
 void tc_writel(unsigned long data, volatile __u32 * addr)
 {
-	addr = PHYSADDR(addr);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
 	    cpu_to_le32(data);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
+	    (unsigned long) CPHYSADDR(addr);
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
@@ -198,21 +186,15 @@ unsigned char tx_ioinb(unsigned char *addr)
 
 	ioaddr = (unsigned long) addr;
 	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x7;
-	else if (offset == 1)
-		byte = 0xb;
-	else if (offset == 2)
-		byte = 0xd;
-	else if (offset == 3)
-		byte = 0xe;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	byte = 0xf & ~(8 >> offset);
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	val = val & 0xff;
 	/* clear by setting */
@@ -229,18 +211,12 @@ void tx_iooutb(unsigned long data, unsigned char *addr)
 	data = data | (data << 8) | (data << 16) | (data << 24);
 	ioaddr = (unsigned long) addr;
 	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x7;
-	else if (offset == 1)
-		byte = 0xb;
-	else if (offset == 2)
-		byte = 0xd;
-	else if (offset == 3)
-		byte = 0xe;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	byte = 0xf & ~(8 >> offset);
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	/* clear by setting */
@@ -255,18 +231,16 @@ unsigned short tx_ioinw(unsigned short *addr)
 	int byte;
 
 	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x3;
-	else if (offset == 2)
-		byte = 0xc;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	offset = ioaddr & 0x2;
+	byte = 3 << offset;
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	val = val & 0xffff;
 	/* clear by setting */
@@ -283,15 +257,13 @@ void tx_iooutw(unsigned long data, unsigned short *addr)
 
 	data = data | (data << 16);
 	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x3;
-	else if (offset == 2)
-		byte = 0xc;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	offset = ioaddr & 0x2;
+	byte = 3 << offset;
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	/* clear by setting */
@@ -304,14 +276,14 @@ unsigned long tx_ioinl(unsigned int *addr)
 	__u32 ioaddr;
 
 	ioaddr = (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	/* clear by setting */
 	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
@@ -323,11 +295,11 @@ void tx_iooutl(unsigned long data, unsigned int *addr)
 	__u32 ioaddr;
 
 	ioaddr = (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
 	    cpu_to_le32(data);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));

arch/mips/pci/pci-jmr3927.c

@@ -54,5 +54,5 @@ struct pci_controller jmr3927_controller = {
 	.pci_ops	= &jmr3927_pci_ops,
 	.io_resource	= &pci_io_resource,
 	.mem_resource	= &pci_mem_resource,
-	.mem_offset	= JMR3927_PCIMEM;
+	.mem_offset	= JMR3927_PCIMEM
 };

arch/mips/sgi-ip32/crime.c

@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/bootinfo.h>
 #include <asm/io.h>
 #include <asm/mipsregs.h>
@@ -18,8 +19,10 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/mace.h>
 
-struct sgi_crime *crime;
-struct sgi_mace *mace;
+struct sgi_crime __iomem *crime;
+struct sgi_mace __iomem *mace;
+
+EXPORT_SYMBOL_GPL(mace);
 
 void __init crime_init(void)
 {

drivers/ide/Kconfig

@@ -787,6 +787,10 @@ config BLK_DEV_IDE_PMAC_BLINK
 	  This option enables the use of the sleep LED as a hard drive
 	  activity LED.
 
+config BLK_DEV_IDE_SWARM
+	tristate "IDE for Sibyte evaluation boards"
+	depends on SIBYTE_SB1xxx_SOC
+
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
        depends on SOC_AU1200

drivers/ide/Makefile

@@ -48,6 +48,6 @@ obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd.o
 obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o
 obj-$(CONFIG_BLK_DEV_IDEFLOPPY)		+= ide-floppy.o
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= legacy/ arm/
+obj-$(CONFIG_BLK_DEV_IDE)		+= legacy/ arm/ mips/
 obj-$(CONFIG_BLK_DEV_HD)		+= legacy/
 obj-$(CONFIG_ETRAX_IDE)		+= cris/

drivers/ide/mips/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_BLK_DEV_IDE_SWARM)		+= swarm.o

drivers/ide/mips/swarm.c

@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2004 MontaVista Software Inc.
+ *	Author:	Manish Lachwani, mlachwani@mvista.com
+ * Copyright (C) 2004  MIPS Technologies, Inc.  All rights reserved.
+ *	Author: Maciej W. Rozycki <macro@mips.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ *  Derived loosely from ide-pmac.c, so:
+ *  Copyright (C) 1998 Paul Mackerras.
+ *  Copyright (C) 1995-1998 Mark Lord
+ */
+
+/*
+ * Boards with SiByte processors so far have supported IDE devices via
+ * the Generic Bus, PCI bus, and built-in PCMCIA interface.  In all
+ * cases, byte-swapping must be avoided for these devices (whereas
+ * other PCI devices, for example, will require swapping).  Any
+ * SiByte-targetted kernel including IDE support will include this
+ * file.  Probing of a Generic Bus for an IDE device is controlled by
+ * the definition of "SIBYTE_HAVE_IDE", which is provided by
+ * <asm/sibyte/board.h> for Broadcom boards.
+ */
+
+#include <linux/ide.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#define DRV_NAME "ide-swarm"
+
+static char swarm_ide_string[] = DRV_NAME;
+
+static struct resource swarm_ide_resource = {
+	.name	= "SWARM GenBus IDE",
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device *swarm_ide_dev;
+
+/*
+ * swarm_ide_probe - if the board header indicates the existence of
+ * Generic Bus IDE, allocate a HWIF for it.
+ */
+static int __devinit swarm_ide_probe(struct device *dev)
+{
+	ide_hwif_t *hwif;
+	u8 __iomem *base;
+	phys_t offset, size;
+	int i;
+
+	if (!SIBYTE_HAVE_IDE)
+		return -ENODEV;
+
+	/* Find an empty slot.  */
+	for (i = 0; i < MAX_HWIFS; i++)
+		if (!ide_hwifs[i].io_ports[IDE_DATA_OFFSET])
+			break;
+	if (i >= MAX_HWIFS) {
+		printk(KERN_ERR DRV_NAME ": no free slot for interface\n");
+		return -ENOMEM;
+	}
+
+	hwif = ide_hwifs + i;
+
+	base = ioremap(A_IO_EXT_BASE, 0x800);
+	offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
+	size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
+	iounmap(base);
+
+	offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
+	size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
+	if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
+		printk(KERN_INFO DRV_NAME
+		       ": IDE interface at GenBus disabled\n");
+		return -EBUSY;
+	}
+
+	printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n",
+	       IDE_CS);
+
+	swarm_ide_resource.start = offset;
+	swarm_ide_resource.end = offset + size - 1;
+	if (request_resource(&iomem_resource, &swarm_ide_resource)) {
+		printk(KERN_ERR DRV_NAME
+		       ": can't request I/O memory resource\n");
+		return -EBUSY;
+	}
+
+	base = ioremap(offset, size);
+
+	/* Setup MMIO ops.  */
+	default_hwif_mmiops(hwif);
+	/* Prevent resource map manipulation.  */
+	hwif->mmio = 2;
+	hwif->noprobe = 0;
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
+		hwif->hw.io_ports[i] =
+				(unsigned long)(base + ((0x1f0 + i) << 5));
+	hwif->hw.io_ports[IDE_CONTROL_OFFSET] =
+				(unsigned long)(base + (0x3f6 << 5));
+	hwif->hw.irq = K_INT_GB_IDE;
+
+	memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
+	hwif->irq = hwif->hw.irq;
+
+	dev_set_drvdata(dev, hwif);
+
+	return 0;
+}
+
+static struct device_driver swarm_ide_driver = {
+	.name	= swarm_ide_string,
+	.bus	= &platform_bus_type,
+	.probe	= swarm_ide_probe,
+};
+
+static void swarm_ide_platform_release(struct device *device)
+{
+	struct platform_device *pldev;
+
+	/* free device */
+	pldev = to_platform_device(device);
+	kfree(pldev);
+}
+
+static int __devinit swarm_ide_init_module(void)
+{
+	struct platform_device *pldev;
+	int err;
+
+	printk(KERN_INFO "SWARM IDE driver\n");
+
+	if (driver_register(&swarm_ide_driver)) {
+		printk(KERN_ERR "Driver registration failed\n");
+		err = -ENODEV;
+		goto out;
+	}
+
+        if (!(pldev = kmalloc(sizeof (*pldev), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto out_unregister_driver;
+	}
+
+	memset (pldev, 0, sizeof (*pldev));
+	pldev->name		= swarm_ide_string;
+	pldev->id		= 0;
+	pldev->dev.release	= swarm_ide_platform_release;
+
+	if (platform_device_register(pldev)) {
+		err = -ENODEV;
+		goto out_free_pldev;
+	}
+
+        if (!pldev->dev.driver) {
+		/*
+		 * The driver was not bound to this device, there was
+                 * no hardware at this address. Unregister it, as the
+		 * release fuction will take care of freeing the
+		 * allocated structure
+		 */
+		platform_device_unregister (pldev);
+	}
+
+	swarm_ide_dev = pldev;
+
+	return 0;
+
+out_free_pldev:
+	kfree(pldev);
+
+out_unregister_driver:
+	driver_unregister(&swarm_ide_driver);
+out:
+	return err;
+}
+
+module_init(swarm_ide_init_module);

drivers/tc/zs.c

@@ -6,7 +6,7 @@
  *
  * DECstation changes
  * Copyright (C) 1998-2000 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005  Maciej W. Rozycki
  *
  * For the rest of the code the original Copyright applies:
  * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
@@ -55,6 +55,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/spinlock.h>
 #ifdef CONFIG_SERIAL_DEC_CONSOLE
 #include <linux/console.h>
 #endif
@@ -63,7 +64,6 @@
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
 #include <asm/bootinfo.h>
 
 #include <asm/dec/interrupts.h>
@@ -128,6 +128,8 @@ static struct zs_parms ds_parms = {
 
 #define BUS_PRESENT (DS_BUS_PRESENT)
 
+DEFINE_SPINLOCK(zs_lock);
+
 struct dec_zschannel zs_channels[NUM_CHANNELS];
 struct dec_serial zs_soft[NUM_CHANNELS];
 int zs_channels_found;
@@ -159,8 +161,6 @@ static unsigned char zs_init_regs[16] __initdata = {
 	0				/* write 15 */
 };
 
-DECLARE_TASK_QUEUE(tq_zs_serial);
-
 static struct tty_driver *serial_driver;
 
 /* serial subtype definitions */
@@ -294,8 +294,7 @@ static inline void zs_rtsdtr(struct dec_serial *info, int which, int set)
 {
         unsigned long flags;
 
-
-	save_flags(flags); cli();
+	spin_lock_irqsave(&zs_lock, flags);
 	if (info->zs_channel != info->zs_chan_a) {
 		if (set) {
 			info->zs_chan_a->curregs[5] |= (which & (RTS | DTR));
@@ -304,7 +303,7 @@ static inline void zs_rtsdtr(struct dec_serial *info, int which, int set)
 		}
 		write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]);
 	}
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
 /* Utility routines for the Zilog */
@@ -345,12 +344,10 @@ static inline void rs_recv_clear(struct dec_zschannel *zsc)
  * This routine is used by the interrupt handler to schedule
  * processing in the software interrupt portion of the driver.
  */
-static _INLINE_ void rs_sched_event(struct dec_serial *info,
-				  int event)
+static _INLINE_ void rs_sched_event(struct dec_serial *info, int event)
 {
 	info->event |= 1 << event;
-	queue_task(&info->tqueue, &tq_zs_serial);
-	mark_bh(SERIAL_BH);
+	tasklet_schedule(&info->tlet);
 }
 
 static _INLINE_ void receive_chars(struct dec_serial *info,
@@ -497,9 +494,10 @@ static _INLINE_ void status_handle(struct dec_serial *info)
 /*
  * This is the serial driver's generic interrupt routine
  */
-void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+static irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct dec_serial *info = (struct dec_serial *) dev_id;
+	irqreturn_t status = IRQ_NONE;
 	unsigned char zs_intreg;
 	int shift;
 
@@ -521,6 +519,8 @@ void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
 		if ((zs_intreg & CHAN_IRQMASK) == 0)
 			break;
 
+		status = IRQ_HANDLED;
+
 		if (zs_intreg & CHBRxIP) {
 			receive_chars(info, regs);
 		}
@@ -534,6 +534,8 @@ void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
 
 	/* Why do we need this ? */
 	write_zsreg(info->zs_channel, 0, RES_H_IUS);
+
+	return status;
 }
 
 #ifdef ZS_DEBUG_REGS
@@ -578,12 +580,12 @@ static void rs_stop(struct tty_struct *tty)
 		return;
 
 #if 1
-	save_flags(flags); cli();
+	spin_lock_irqsave(&zs_lock, flags);
 	if (info->zs_channel->curregs[5] & TxENAB) {
 		info->zs_channel->curregs[5] &= ~TxENAB;
 		write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
 	}
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 #endif
 }
 
@@ -595,7 +597,7 @@ static void rs_start(struct tty_struct *tty)
 	if (serial_paranoia_check(info, tty->name, "rs_start"))
 		return;
 
-	save_flags(flags); cli();
+	spin_lock_irqsave(&zs_lock, flags);
 #if 1
 	if (info->xmit_cnt && info->xmit_buf && !(info->zs_channel->curregs[5] & TxENAB)) {
 		info->zs_channel->curregs[5] |= TxENAB;
@@ -606,7 +608,7 @@ static void rs_start(struct tty_struct *tty)
 		transmit_chars(info);
 	}
 #endif
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
 /*
@@ -618,12 +620,8 @@ static void rs_start(struct tty_struct *tty)
  * interrupt driver proper are done; the interrupt driver schedules
  * them using rs_sched_event(), and they get done here.
  */
-static void do_serial_bh(void)
-{
-	run_task_queue(&tq_zs_serial);
-}
 
-static void do_softint(void *private_)
+static void do_softint(unsigned long private_)
 {
 	struct dec_serial	*info = (struct dec_serial *) private_;
 	struct tty_struct	*tty;
@@ -634,10 +632,11 @@ static void do_softint(void *private_)
 
 	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
 		tty_wakeup(tty);
+		wake_up_interruptible(&tty->write_wait);
 	}
 }
 
-int zs_startup(struct dec_serial * info)
+static int zs_startup(struct dec_serial * info)
 {
 	unsigned long flags;
 
@@ -650,7 +649,7 @@ int zs_startup(struct dec_serial * info)
 			return -ENOMEM;
 	}
 
-	save_flags(flags); cli();
+	spin_lock_irqsave(&zs_lock, flags);
 
 #ifdef SERIAL_DEBUG_OPEN
 	printk("starting up ttyS%d (irq %d)...", info->line, info->irq);
@@ -706,7 +705,7 @@ int zs_startup(struct dec_serial * info)
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
 	info->flags |= ZILOG_INITIALIZED;
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 	return 0;
 }
 
@@ -726,7 +725,7 @@ static void shutdown(struct dec_serial * info)
 	       info->irq);
 #endif
 
-	save_flags(flags); cli(); /* Disable interrupts */
+	spin_lock_irqsave(&zs_lock, flags);
 
 	if (info->xmit_buf) {
 		free_page((unsigned long) info->xmit_buf);
@@ -749,7 +748,7 @@ static void shutdown(struct dec_serial * info)
 		set_bit(TTY_IO_ERROR, &info->tty->flags);
 
 	info->flags &= ~ZILOG_INITIALIZED;
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
 /*
@@ -785,7 +784,7 @@ static void change_speed(struct dec_serial *info)
 			i += 15;
 	}
 
-	save_flags(flags); cli();
+	spin_lock_irqsave(&zs_lock, flags);
 	info->zs_baud = baud_table[i];
 	if (info->zs_baud) {
 		brg = BPS_TO_BRG(info->zs_baud, zs_parms->clock/info->clk_divisor);
@@ -858,7 +857,7 @@ static void change_speed(struct dec_serial *info)
 	/* Load up the new values */
 	load_zsregs(info->zs_channel, info->zs_channel->curregs);
 
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
 static void rs_flush_chars(struct tty_struct *tty)
@@ -874,9 +873,9 @@ static void rs_flush_chars(struct tty_struct *tty)
 		return;
 
 	/* Enable transmitter */
-	save_flags(flags); cli();
+	spin_lock_irqsave(&zs_lock, flags);
 	transmit_chars(info);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
 static int rs_write(struct tty_struct * tty,
@@ -892,26 +891,17 @@ static int rs_write(struct tty_struct * tty,
 	if (!tty || !info->xmit_buf)
 		return 0;
 
-	save_flags(flags);
 	while (1) {
-		cli();
+		spin_lock_irqsave(&zs_lock, flags);
 		c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
 				   SERIAL_XMIT_SIZE - info->xmit_head));
 		if (c <= 0)
 			break;
 
-		if (from_user) {
-			down(&tmp_buf_sem);
-			copy_from_user(tmp_buf, buf, c);
-			c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-				       SERIAL_XMIT_SIZE - info->xmit_head));
-			memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
-			up(&tmp_buf_sem);
-		} else
-			memcpy(info->xmit_buf + info->xmit_head, buf, c);
+		memcpy(info->xmit_buf + info->xmit_head, buf, c);
 		info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
 		info->xmit_cnt += c;
-		restore_flags(flags);
+		spin_unlock_irqrestore(&zs_lock, flags);
 		buf += c;
 		count -= c;
 		total += c;
@@ -920,7 +910,7 @@ static int rs_write(struct tty_struct * tty,
 	if (info->xmit_cnt && !tty->stopped && !info->tx_stopped
 	    && !info->tx_active)
 		transmit_chars(info);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 	return total;
 }
 
@@ -952,9 +942,9 @@ static void rs_flush_buffer(struct tty_struct *tty)
 
 	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
 		return;
-	cli();
+	spin_lock_irq(&zs_lock);
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-	sti();
+	spin_unlock_irq(&zs_lock);
 	tty_wakeup(tty);
 }
 
@@ -982,11 +972,11 @@ static void rs_throttle(struct tty_struct * tty)
 		return;
 
 	if (I_IXOFF(tty)) {
-		save_flags(flags); cli();
+		spin_lock_irqsave(&zs_lock, flags);
 		info->x_char = STOP_CHAR(tty);
 		if (!info->tx_active)
 			transmit_chars(info);
-		restore_flags(flags);
+		spin_unlock_irqrestore(&zs_lock, flags);
 	}
 
 	if (C_CRTSCTS(tty)) {
@@ -1010,7 +1000,7 @@ static void rs_unthrottle(struct tty_struct * tty)
 		return;
 
 	if (I_IXOFF(tty)) {
-		save_flags(flags); cli();
+		spin_lock_irqsave(&zs_lock, flags);
 		if (info->x_char)
 			info->x_char = 0;
 		else {
@@ -1018,7 +1008,7 @@ static void rs_unthrottle(struct tty_struct * tty)
 			if (!info->tx_active)
 				transmit_chars(info);
 		}
-		restore_flags(flags);
+		spin_unlock_irqrestore(&zs_lock, flags);
 	}
 
 	if (C_CRTSCTS(tty)) {
@@ -1111,9 +1101,9 @@ static int get_lsr_info(struct dec_serial * info, unsigned int *value)
 {
 	unsigned char status;
 
-	cli();
+	spin_lock(&zs_lock);
 	status = read_zsreg(info->zs_channel, 0);
-	sti();
+	spin_unlock_irq(&zs_lock);
 	put_user(status,value);
 	return 0;
 }
@@ -1136,11 +1126,11 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file)
 	if (info->zs_channel == info->zs_chan_a)
 		result = 0;
 	else {
-		cli();
+		spin_lock(&zs_lock);
 		control = info->zs_chan_a->curregs[5];
 		status_a = read_zsreg(info->zs_chan_a, 0);
 		status_b = read_zsreg(info->zs_channel, 0);
-		sti();
+		spin_unlock_irq(&zs_lock);
 		result =  ((control  & RTS) ? TIOCM_RTS: 0)
 			| ((control  & DTR) ? TIOCM_DTR: 0)
 			| ((status_b & DCD) ? TIOCM_CAR: 0)
@@ -1155,8 +1145,6 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file,
                        unsigned int set, unsigned int clear)
 {
 	struct dec_serial * info = (struct dec_serial *)tty->driver_data;
-	int error;
-	unsigned int arg, bits;
 
 	if (info->hook)
 		return -ENODEV;
@@ -1170,8 +1158,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file,
 	if (info->zs_channel == info->zs_chan_a)
 		return 0;
 
-	get_user(arg, value);
-	cli();
+	spin_lock(&zs_lock);
 	if (set & TIOCM_RTS)
 		info->zs_chan_a->curregs[5] |= RTS;
 	if (set & TIOCM_DTR)
@@ -1181,7 +1168,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file,
 	if (clear & TIOCM_DTR)
 		info->zs_chan_a->curregs[5] &= ~DTR;
 	write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]);
-	sti();
+	spin_unlock_irq(&zs_lock);
 	return 0;
 }
 
@@ -1198,19 +1185,18 @@ static void rs_break(struct tty_struct *tty, int break_state)
 	if (!info->port)
 		return;
 
-	save_flags(flags); cli();
+	spin_lock_irqsave(&zs_lock, flags);
 	if (break_state == -1)
 		info->zs_channel->curregs[5] |= SND_BRK;
 	else
 		info->zs_channel->curregs[5] &= ~SND_BRK;
 	write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
 {
-	int error;
 	struct dec_serial * info = (struct dec_serial *)tty->driver_data;
 
 	if (info->hook)
@@ -1287,10 +1273,10 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
 		return;
 
-	save_flags(flags); cli();
+	spin_lock_irqsave(&zs_lock, flags);
 
 	if (tty_hung_up_p(filp)) {
-		restore_flags(flags);
+		spin_unlock_irqrestore(&zs_lock, flags);
 		return;
 	}
 
@@ -1315,7 +1301,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		info->count = 0;
 	}
 	if (info->count) {
-		restore_flags(flags);
+		spin_unlock_irqrestore(&zs_lock, flags);
 		return;
 	}
 	info->flags |= ZILOG_CLOSING;
@@ -1358,7 +1344,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	}
 	info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING);
 	wake_up_interruptible(&info->close_wait);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
 /*
@@ -1398,7 +1384,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
 /*
  * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
  */
-void rs_hangup(struct tty_struct *tty)
+static void rs_hangup(struct tty_struct *tty)
 {
 	struct dec_serial * info = (struct dec_serial *)tty->driver_data;
 
@@ -1466,16 +1452,16 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	printk("block_til_ready before block: ttyS%d, count = %d\n",
 	       info->line, info->count);
 #endif
-	cli();
+	spin_lock(&zs_lock);
 	if (!tty_hung_up_p(filp))
 		info->count--;
-	sti();
+	spin_unlock_irq(&zs_lock);
 	info->blocked_open++;
 	while (1) {
-		cli();
+		spin_lock(&zs_lock);
 		if (tty->termios->c_cflag & CBAUD)
 			zs_rtsdtr(info, RTS | DTR, 1);
-		sti();
+		spin_unlock_irq(&zs_lock);
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (tty_hung_up_p(filp) ||
 		    !(info->flags & ZILOG_INITIALIZED)) {
@@ -1523,7 +1509,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
  * the IRQ chain.   It also performs the serial-specific
  * initialization for the tty structure.
  */
-int rs_open(struct tty_struct *tty, struct file * filp)
+static int rs_open(struct tty_struct *tty, struct file * filp)
 {
 	struct dec_serial	*info;
 	int 			retval, line;
@@ -1706,7 +1692,7 @@ static void __init probe_sccs(void)
 		}
 	}
 
-	save_and_cli(flags);
+	spin_lock_irqsave(&zs_lock, flags);
 	for (n = 0; n < zs_channels_found; n++) {
 		if (n % 2 == 0) {
 			write_zsreg(zs_soft[n].zs_chan_a, R9, FHWRES);
@@ -1716,7 +1702,7 @@ static void __init probe_sccs(void)
 		load_zsregs(zs_soft[n].zs_channel,
 			    zs_soft[n].zs_channel->curregs);
 	}
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
 static struct tty_operations serial_ops = {
@@ -1749,9 +1735,6 @@ int __init zs_init(void)
 	if(!BUS_PRESENT)
 		return -ENODEV;
 
-	/* Setup base handler, and timer table. */
-	init_bh(SERIAL_BH, do_serial_bh);
-
 	/* Find out how many Z8530 SCCs we have */
 	if (zs_chain == 0)
 		probe_sccs();
@@ -1800,8 +1783,7 @@ int __init zs_init(void)
 		info->event = 0;
 		info->count = 0;
 		info->blocked_open = 0;
-		info->tqueue.routine = do_softint;
-		info->tqueue.data = info;
+		tasklet_init(&info->tlet, do_softint, (unsigned long)info);
 		init_waitqueue_head(&info->open_wait);
 		init_waitqueue_head(&info->close_wait);
 		printk("ttyS%02d at 0x%08x (irq = %d) is a Z85C30 SCC\n",
@@ -1833,8 +1815,7 @@ int __init zs_init(void)
 /*
  * polling I/O routines
  */
-static int
-zs_poll_tx_char(void *handle, unsigned char ch)
+static int zs_poll_tx_char(void *handle, unsigned char ch)
 {
 	struct dec_serial *info = handle;
 	struct dec_zschannel *chan = info->zs_channel;
@@ -1857,8 +1838,7 @@ zs_poll_tx_char(void *handle, unsigned char ch)
 		return -ENODEV;
 }
 
-static int
-zs_poll_rx_char(void *handle)
+static int zs_poll_rx_char(void *handle)
 {
 	struct dec_serial *info = handle;
         struct dec_zschannel *chan = info->zs_channel;
@@ -2037,7 +2017,7 @@ static int __init serial_console_setup(struct console *co, char *options)
 	}
 	co->cflag = cflag;
 
-	save_and_cli(flags);
+	spin_lock_irqsave(&zs_lock, flags);
 
 	/*
 	 * Set up the baud rate generator.
@@ -2092,7 +2072,7 @@ static int __init serial_console_setup(struct console *co, char *options)
 	zs_soft[co->index].clk_divisor = clk_divisor;
 	zs_soft[co->index].zs_baud = get_zsbaud(&zs_soft[co->index]);
 
-	restore_flags(flags);
+	spin_unlock_irqrestore(&zs_lock, flags);
 
 	return 0;
 }
@@ -2229,5 +2209,3 @@ void __init zs_kgdb_hook(int tty_num)
 	set_debug_traps(); /* init stub */
 }
 #endif /* ifdef CONFIG_KGDB */
-
-

drivers/tc/zs.h

@@ -6,14 +6,14 @@
  *
  * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2004  Maciej W. Rozycki
+ * Copyright (C) 2004, 2005  Maciej W. Rozycki
  */
 #ifndef _DECSERIAL_H
 #define _DECSERIAL_H
 
 #include <asm/dec/serial.h>
 
-#define NUM_ZSREGS    16
+#define NUM_ZSREGS 16
 
 struct serial_struct {
 	int	type;
@@ -139,8 +139,7 @@ struct dec_serial {
 	int			xmit_head;
 	int			xmit_tail;
 	int			xmit_cnt;
-	struct tq_struct	tqueue;
-	struct tq_struct	tqueue_hangup;
+	struct tasklet_struct	tlet;
 	wait_queue_head_t	open_wait;
 	wait_queue_head_t	close_wait;
 };
@@ -282,7 +281,7 @@ struct dec_serial {
 #define	DLC	4	/* Disable Lower Chain */
 #define	MIE	8	/* Master Interrupt Enable */
 #define	STATHI	0x10	/* Status high */
-#define SOFTACK 0x20    /* Software Interrupt Acknowledge */
+#define	SOFTACK	0x20	/* Software Interrupt Acknowledge */
 #define	NORESET	0	/* No reset on write to R9 */
 #define	CHRB	0x40	/* Reset channel B */
 #define	CHRA	0x80	/* Reset channel A */
@@ -395,8 +394,8 @@ struct dec_serial {
 /* Read Register 15 (value of WR 15) */
 
 /* Misc macros */
-#define ZS_CLEARERR(channel)    (write_zsreg(channel, 0, ERR_RES))
-#define ZS_CLEARFIFO(channel)   do { volatile unsigned char garbage; \
+#define ZS_CLEARERR(channel)	(write_zsreg(channel, 0, ERR_RES))
+#define ZS_CLEARFIFO(channel)	do { volatile unsigned char garbage; \
 				     garbage = read_zsdata(channel); \
 				     garbage = read_zsdata(channel); \
 				     garbage = read_zsdata(channel); \

include/asm-mips/atomic.h

@@ -231,11 +231,12 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 }
 
 /*
- * atomic_sub_if_positive - add integer to atomic variable
+ * atomic_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
  * @v: pointer of type atomic_t
  *
- * Atomically test @v and decrement if it is greater than 0.
- * The function returns the old value of @v minus 1.
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
  */
 static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 {
@@ -577,11 +578,12 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 }
 
 /*
- * atomic64_sub_if_positive - add integer to atomic variable
+ * atomic64_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
  * @v: pointer of type atomic64_t
  *
- * Atomically test @v and decrement if it is greater than 0.
- * The function returns the old value of @v minus 1.
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
  */
 static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 {

include/asm-mips/io.h

@@ -459,10 +459,10 @@ __BUILDIO(q, u64)
 
 #define __BUILD_MEMORY_STRING(bwlq, type)				\
 									\
-static inline void writes##bwlq(volatile void __iomem *mem, void *addr,	\
-				unsigned int count)			\
+static inline void writes##bwlq(volatile void __iomem *mem,		\
+				const void *addr, unsigned int count)	\
 {									\
-	volatile type *__addr = addr;					\
+	const volatile type *__addr = addr;				\
 									\
 	while (count--) {						\
 		mem_write##bwlq(*__addr, mem);				\

include/asm-mips/ip32/crime.h

@@ -154,7 +154,7 @@ struct sgi_crime {
 #define CRIME_MEM_ERROR_ECC_REPL_MASK	0xffffffff
 };
 
-extern struct sgi_crime *crime;
+extern struct sgi_crime __iomem *crime;
 
 #define CRIME_HI_MEM_BASE	0x40000000	/* this is where whole 1G of RAM is mapped */
 

include/asm-mips/ip32/mace.h

@@ -150,24 +150,34 @@ struct mace_audio {
 
 /* register definitions for parallel port DMA */
 struct mace_parport {
-/* 0 - do nothing, 1 - pulse terminal count to the device after buffer is drained */ 
-#define MACEPAR_CONTEXT_LASTFLAG BIT(63)
-/* Should not cross 4K page boundary */
-#define MACEPAR_CONTEXT_DATALEN_MASK 0xfff00000000
-/* Can be arbitrarily aligned on any byte boundary on output, 64 byte aligned on input */
-#define MACEPAR_CONTEXT_BASEADDR_MASK 0xffffffff
+	/* 0 - do nothing,
+	 * 1 - pulse terminal count to the device after buffer is drained */
+#define MACEPAR_CONTEXT_LASTFLAG	BIT(63)
+	/* Should not cross 4K page boundary */
+#define MACEPAR_CONTEXT_DATA_BOUND	0x0000000000001000UL
+#define MACEPAR_CONTEXT_DATALEN_MASK	0x00000fff00000000UL
+#define MACEPAR_CONTEXT_DATALEN_SHIFT	32
+	/* Can be arbitrarily aligned on any byte boundary on output,
+	 * 64 byte aligned on input */
+#define MACEPAR_CONTEXT_BASEADDR_MASK	0x00000000ffffffffUL
 	volatile u64 context_a;
 	volatile u64 context_b;
-#define MACEPAR_CTLSTAT_DIRECTION BIT(0) /* 0 - mem->device, 1 - device->mem */
-#define MACEPAR_CTLSTAT_ENABLE BIT(1) /* 0 - channel frozen, 1 - channel enabled */
-#define MACEPAR_CTLSTAT_RESET BIT(2) /* 0 - channel active, 1 - complete channel reset */
-#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3)
-#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4)
-	volatile u64 cntlstat; /* Control/Status register */
-#define MACEPAR_DIAG_CTXINUSE BIT(1)
-#define MACEPAR_DIAG_DMACTIVE BIT(2) /* 1 - Dma engine is enabled and processing something */
-#define MACEPAR_DIAG_CTRMASK 0x3ffc /* Counter of bytes left */
-	volatile u64 diagnostic; /* RO: diagnostic register */
+	/* 0 - mem->device, 1 - device->mem */
+#define MACEPAR_CTLSTAT_DIRECTION	BIT(0)
+	/* 0 - channel frozen, 1 - channel enabled */
+#define MACEPAR_CTLSTAT_ENABLE		BIT(1)
+	/* 0 - channel active, 1 - complete channel reset */
+#define MACEPAR_CTLSTAT_RESET		BIT(2)
+#define MACEPAR_CTLSTAT_CTXB_VALID	BIT(3)
+#define MACEPAR_CTLSTAT_CTXA_VALID	BIT(4)
+	volatile u64 cntlstat;		/* Control/Status register */
+#define MACEPAR_DIAG_CTXINUSE		BIT(0)
+	/* 1 - Dma engine is enabled and processing something */
+#define MACEPAR_DIAG_DMACTIVE		BIT(1)
+	/* Counter of bytes left */
+#define MACEPAR_DIAG_CTRMASK		0x0000000000003ffcUL
+#define MACEPAR_DIAG_CTRSHIFT		2
+	volatile u64 diagnostic;	/* RO: diagnostic register */
 };
 
 /* ISA Control and DMA registers */
@@ -353,6 +363,6 @@ struct sgi_mace {
 	char _pad6[0x80000 - sizeof(struct mace_isa)];
 };
 
-extern struct sgi_mace *mace;
+extern struct sgi_mace __iomem *mace;
 
 #endif /* __ASM_MACE_H__ */

include/asm-mips/mach-db1x00/db1200.h

@@ -220,5 +220,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 #define BOARD_PC1_INT DB1200_PC1_INT
 #define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
 
+/* Nand chip select */
+#define NAND_CS 1
+
 #endif /* __ASM_DB1200_H */
 

include/asm-mips/mach-db1x00/db1x00.h

@@ -200,6 +200,12 @@ typedef volatile struct
 			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
 			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
 			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
+#define NAND_CS 1
+
+/* should be done by yamon */
+#define NAND_STCFG  0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
 
 #endif /* __ASM_DB1X00_H */
 

include/asm-mips/mach-ip32/mc146818rtc.h

@@ -11,7 +11,6 @@
 #ifndef __ASM_MACH_IP32_MC146818RTC_H
 #define __ASM_MACH_IP32_MC146818RTC_H
 
-#include <asm/io.h>
 #include <asm/ip32/mace.h>
 
 #define RTC_PORT(x)	(0x70 + (x))
@@ -26,8 +25,10 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
 	mace->isa.rtc[addr << 8] = data;
 }
 
-/* FIXME: Do it right. For now just assume that noone lives in 20th century
- * and no O2 user in 22th century ;-) */
+/*
+ * FIXME: Do it right. For now just assume that noone lives in 20th century
+ * and no O2 user in 22th century ;-)
+ */
 #define mc146818_decode_year(year) ((year) + 2000)
 
 #define RTC_ALWAYS_BCD	0

include/asm-mips/mach-jmr3927/asm/ds1742.h → include/asm-mips/mach-jmr3927/ds1742.h

@@ -5,12 +5,12 @@
  *
  * Copyright (C) 2003 by Ralf Baechle
  */
-#ifndef __ASM_MACH_JMR3927_ASM_DS1742_H
-#define __ASM_MACH_JMR3927_ASM_DS1742_H
+#ifndef __ASM_MACH_JMR3927_DS1742_H
+#define __ASM_MACH_JMR3927_DS1742_H
 
 #include <asm/jmr3927/jmr3927.h>
 
 #define rtc_read(reg)		(jmr3927_nvram_in(addr))
 #define rtc_write(data, reg)	(jmr3927_nvram_out((data),(reg)))
 
-#endif /* __ASM_MACH_JMR3927_ASM_DS1742_H */
+#endif /* __ASM_MACH_JMR3927_DS1742_H */

include/asm-mips/mach-pb1x00/pb1200.h

@@ -248,5 +248,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 #define BOARD_PC1_INT PB1200_PC1_INT
 #define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
 
+/* Nand chip select */
+#define NAND_CS 1
+
 #endif /* __ASM_PB1200_H */
 

include/asm-mips/mach-pb1x00/pb1550.h

@@ -166,4 +166,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
 			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
 			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
 
+#define NAND_CS 1
+
+/* should be done by yamon */
+#define NAND_STCFG  0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+
 #endif /* __ASM_PB1550_H */

include/asm-mips/mips-boards/seadint.h

@@ -20,9 +20,14 @@
 #ifndef _MIPS_SEADINT_H
 #define _MIPS_SEADINT_H
 
-#define SEADINT_UART0     2
-#define SEADINT_UART1     3
+/*
+ * Interrupts 0..7 are used for SEAD CPU interrupts
+ */
+#define MIPSCPU_INT_BASE	0
+
+#define MIPSCPU_INT_UART0	2
+#define MIPSCPU_INT_UART1	3
 
-extern void seadint_init(void);
+#define MIPSCPU_INT_CPUCTR	7
 
 #endif /* !(_MIPS_SEADINT_H) */

include/asm-mips/signal.h

@@ -155,27 +155,6 @@ typedef struct sigaltstack {
 #ifdef __KERNEL__
 #include <asm/sigcontext.h>
 
-/*
- * The following break codes are or were in use for specific purposes in
- * other MIPS operating systems.  Linux/MIPS doesn't use all of them.  The
- * unused ones are here as placeholders; we might encounter them in
- * non-Linux/MIPS object files or make use of them in the future.
- */
-#define BRK_USERBP	0	/* User bp (used by debuggers) */
-#define BRK_KERNELBP	1	/* Break in the kernel */
-#define BRK_ABORT	2	/* Sometimes used by abort(3) to SIGIOT */
-#define BRK_BD_TAKEN	3	/* For bd slot emulation - not implemented */
-#define BRK_BD_NOTTAKEN	4	/* For bd slot emulation - not implemented */
-#define BRK_SSTEPBP	5	/* User bp (used by debuggers) */
-#define BRK_OVERFLOW	6	/* Overflow check */
-#define BRK_DIVZERO	7	/* Divide by zero check */
-#define BRK_RANGE	8	/* Range error check */
-#define BRK_STACKOVERFLOW 9	/* For Ada stackchecking */
-#define BRK_NORLD	10	/* No rld found - not used by Linux/MIPS */
-#define _BRK_THREADBP	11	/* For threads, user bp (used by debuggers) */
-#define BRK_MULOVF	1023	/* Multiply overflow */
-#define BRK_BUG		512	/* Used by BUG() */
-
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 
 #endif /* __KERNEL__ */

include/linux/ds17287rtc.h

@@ -0,0 +1,67 @@
+/*
+ * ds17287rtc.h - register definitions for the ds1728[57] RTC / CMOS RAM
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) 2003 Guido Guenther <agx@sigxcpu.org>
+ */
+#ifndef __LINUX_DS17287RTC_H
+#define __LINUX_DS17287RTC_H
+
+#include <linux/rtc.h>			/* get the user-level API */
+#include <linux/spinlock.h>		/* spinlock_t */
+#include <linux/mc146818rtc.h>
+
+/* Register A */
+#define DS_REGA_DV2	0x40		/* countdown chain */
+#define DS_REGA_DV1	0x20		/* oscillator enable */
+#define DS_REGA_DV0	0x10		/* bank select */
+
+/* bank 1 registers */
+#define DS_B1_MODEL	0x40		/* model number byte */
+#define DS_B1_SN1 	0x41		/* serial number byte 1 */
+#define DS_B1_SN2 	0x42		/* serial number byte 2 */
+#define DS_B1_SN3 	0x43		/* serial number byte 3 */
+#define DS_B1_SN4 	0x44		/* serial number byte 4 */
+#define DS_B1_SN5 	0x45		/* serial number byte 5 */
+#define DS_B1_SN6 	0x46		/* serial number byte 6 */
+#define DS_B1_CRC 	0x47		/* CRC byte */
+#define DS_B1_CENTURY 	0x48		/* Century byte */
+#define DS_B1_DALARM 	0x49		/* date alarm */
+#define DS_B1_XCTRL4A	0x4a		/* extendec control register 4a */
+#define DS_B1_XCTRL4B	0x4b		/* extendec control register 4b */
+#define DS_B1_RTCADDR2 	0x4e		/* rtc address 2 */
+#define DS_B1_RTCADDR3 	0x4f		/* rtc address 3 */
+#define DS_B1_RAMLSB	0x50		/* extended ram LSB */
+#define DS_B1_RAMMSB	0x51		/* extended ram MSB */
+#define DS_B1_RAMDPORT	0x53		/* extended ram data port */
+
+/* register details */
+/* extended control register 4a */
+#define DS_XCTRL4A_VRT2	0x80 		/* valid ram and time */
+#define DS_XCTRL4A_INCR	0x40		/* increment progress status */
+#define DS_XCTRL4A_BME	0x20		/* burst mode enable */
+#define DS_XCTRL4A_PAB	0x08		/* power active bar ctrl */
+#define DS_XCTRL4A_RF	0x04		/* ram clear flag */
+#define DS_XCTRL4A_WF	0x02		/* wake up alarm flag */
+#define DS_XCTRL4A_KF	0x01		/* kickstart flag */
+
+/* interrupt causes */
+#define DS_XCTRL4A_IFS	(DS_XCTRL4A_RF|DS_XCTRL4A_WF|DS_XCTRL4A_KF)
+
+/* extended control register 4b */
+#define DS_XCTRL4B_ABE	0x80 		/* auxiliary battery enable */
+#define DS_XCTRL4B_E32K	0x40		/* enable 32.768 kHz Output */
+#define DS_XCTRL4B_CS	0x20		/* crystal select */
+#define DS_XCTRL4B_RCE	0x10		/* ram clear enable */
+#define DS_XCTRL4B_PRS	0x08		/* PAB resec select */
+#define DS_XCTRL4B_RIE	0x04		/* ram clear interrupt enable */
+#define DS_XCTRL4B_WFE	0x02		/* wake up alarm interrupt enable */
+#define DS_XCTRL4B_KFE	0x01		/* kickstart interrupt enable */
+
+/* interrupt enable bits */
+#define DS_XCTRL4B_IFES	(DS_XCTRL4B_RIE|DS_XCTRL4B_WFE|DS_XCTRL4B_KFE)
+
+#endif /* __LINUX_DS17287RTC_H */

include/linux/ds1742rtc.h

@@ -0,0 +1,53 @@
+/*
+ * ds1742rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
+ *
+ * Copyright (C) 1999-2001 Toshiba Corporation
+ * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+#ifndef __LINUX_DS1742RTC_H
+#define __LINUX_DS1742RTC_H
+
+#include <asm/ds1742.h>
+
+#define RTC_BRAM_SIZE		0x800
+#define RTC_OFFSET		0x7f8
+
+/*
+ * Register summary
+ */
+#define RTC_CONTROL		(RTC_OFFSET + 0)
+#define RTC_CENTURY		(RTC_OFFSET + 0)
+#define RTC_SECONDS		(RTC_OFFSET + 1)
+#define RTC_MINUTES		(RTC_OFFSET + 2)
+#define RTC_HOURS		(RTC_OFFSET + 3)
+#define RTC_DAY			(RTC_OFFSET + 4)
+#define RTC_DATE		(RTC_OFFSET + 5)
+#define RTC_MONTH		(RTC_OFFSET + 6)
+#define RTC_YEAR		(RTC_OFFSET + 7)
+
+#define RTC_CENTURY_MASK	0x3f
+#define RTC_SECONDS_MASK	0x7f
+#define RTC_DAY_MASK		0x07
+
+/*
+ * Bits in the Control/Century register
+ */
+#define RTC_WRITE		0x80
+#define RTC_READ		0x40
+
+/*
+ * Bits in the Seconds register
+ */
+#define RTC_STOP		0x80
+
+/*
+ * Bits in the Day register
+ */
+#define RTC_BATT_FLAG		0x80
+#define RTC_FREQ_TEST		0x40
+
+#endif /* __LINUX_DS1742RTC_H */

include/linux/pci_ids.h

@@ -1401,6 +1401,7 @@
 #define PCI_SUBDEVICE_ID_KEYSPAN_SX2	0x5334
 
 #define PCI_VENDOR_ID_MARVELL		0x11ab
+#define PCI_DEVICE_ID_MARVELL_GT64111	0x4146
 #define PCI_DEVICE_ID_MARVELL_GT64260	0x6430
 #define PCI_DEVICE_ID_MARVELL_MV64360	0x6460
 #define PCI_DEVICE_ID_MARVELL_MV64460	0x6480