|
|
@@ -29,11 +29,73 @@
|
|
|
#include "e1000.h"
|
|
|
|
|
|
/* Change Log
|
|
|
- * 6.0.58 4/20/05
|
|
|
- * o Accepted ethtool cleanup patch from Stephen Hemminger
|
|
|
- * 6.0.44+ 2/15/05
|
|
|
- * o applied Anton's patch to resolve tx hang in hardware
|
|
|
- * o Applied Andrew Mortons patch - e1000 stops working after resume
|
|
|
+ * 6.3.9 12/16/2005
|
|
|
+ * o incorporate fix for recycled skbs from IBM LTC
|
|
|
+ * 6.3.7 11/18/2005
|
|
|
+ * o Honor eeprom setting for enabling/disabling Wake On Lan
|
|
|
+ * 6.3.5 11/17/2005
|
|
|
+ * o Fix memory leak in rx ring handling for PCI Express adapters
|
|
|
+ * 6.3.4 11/8/05
|
|
|
+ * o Patch from Jesper Juhl to remove redundant NULL checks for kfree
|
|
|
+ * 6.3.2 9/20/05
|
|
|
+ * o Render logic that sets/resets DRV_LOAD as inline functions to
|
|
|
+ * avoid code replication. If f/w is AMT then set DRV_LOAD only when
|
|
|
+ * network interface is open.
|
|
|
+ * o Handle DRV_LOAD set/reset in cases where AMT uses VLANs.
|
|
|
+ * o Adjust PBA partioning for Jumbo frames using MTU size and not
|
|
|
+ * rx_buffer_len
|
|
|
+ * 6.3.1 9/19/05
|
|
|
+ * o Use adapter->tx_timeout_factor in Tx Hung Detect logic
|
|
|
+ (e1000_clean_tx_irq)
|
|
|
+ * o Support for 8086:10B5 device (Quad Port)
|
|
|
+ * 6.2.14 9/15/05
|
|
|
+ * o In AMT enabled configurations, set/reset DRV_LOAD bit on interface
|
|
|
+ * open/close
|
|
|
+ * 6.2.13 9/14/05
|
|
|
+ * o Invoke e1000_check_mng_mode only for 8257x controllers since it
|
|
|
+ * accesses the FWSM that is not supported in other controllers
|
|
|
+ * 6.2.12 9/9/05
|
|
|
+ * o Add support for device id E1000_DEV_ID_82546GB_QUAD_COPPER
|
|
|
+ * o set RCTL:SECRC only for controllers newer than 82543.
|
|
|
+ * o When the n/w interface comes down reset DRV_LOAD bit to notify f/w.
|
|
|
+ * This code was moved from e1000_remove to e1000_close
|
|
|
+ * 6.2.10 9/6/05
|
|
|
+ * o Fix error in updating RDT in el1000_alloc_rx_buffers[_ps] -- one off.
|
|
|
+ * o Enable fc by default on 82573 controllers (do not read eeprom)
|
|
|
+ * o Fix rx_errors statistic not to include missed_packet_count
|
|
|
+ * o Fix rx_dropped statistic not to include missed_packet_count
|
|
|
+ (Padraig Brady)
|
|
|
+ * 6.2.9 8/30/05
|
|
|
+ * o Remove call to update statistics from the controller ib e1000_get_stats
|
|
|
+ * 6.2.8 8/30/05
|
|
|
+ * o Improved algorithm for rx buffer allocation/rdt update
|
|
|
+ * o Flow control watermarks relative to rx PBA size
|
|
|
+ * o Simplified 'Tx Hung' detect logic
|
|
|
+ * 6.2.7 8/17/05
|
|
|
+ * o Report rx buffer allocation failures and tx timeout counts in stats
|
|
|
+ * 6.2.6 8/16/05
|
|
|
+ * o Implement workaround for controller erratum -- linear non-tso packet
|
|
|
+ * following a TSO gets written back prematurely
|
|
|
+ * 6.2.5 8/15/05
|
|
|
+ * o Set netdev->tx_queue_len based on link speed/duplex settings.
|
|
|
+ * o Fix net_stats.rx_fifo_errors <p@draigBrady.com>
|
|
|
+ * o Do not power off PHY if SoL/IDER session is active
|
|
|
+ * 6.2.4 8/10/05
|
|
|
+ * o Fix loopback test setup/cleanup for 82571/3 controllers
|
|
|
+ * o Fix parsing of outgoing packets (e1000_transfer_dhcp_info) to treat
|
|
|
+ * all packets as raw
|
|
|
+ * o Prevent operations that will cause the PHY to be reset if SoL/IDER
|
|
|
+ * sessions are active and log a message
|
|
|
+ * 6.2.2 7/21/05
|
|
|
+ * o used fixed size descriptors for all MTU sizes, reduces memory load
|
|
|
+ * 6.2.1 7/21/05
|
|
|
+ * o Performance tweaks, including copybreak and prefetch
|
|
|
+ * 6.1.2 4/13/05
|
|
|
+ * o Fixed ethtool diagnostics
|
|
|
+ * o Enabled flow control to take default eeprom settings
|
|
|
+ * o Added stats_lock around e1000_read_phy_reg commands to avoid concurrent
|
|
|
+ * calls, one from mii_ioctl and other from within update_stats while
|
|
|
+ * processing MIIREG ioctl.
|
|
|
*/
|
|
|
|
|
|
char e1000_driver_name[] = "e1000";
|
Jesse Brandeburg