Merge tag 'davinci-for-v3.8/dt' of git://gitorious.org/linux-davinci/linux-davinci into next/dt

From Sekhar Nori:

These changes add DT boot support to DaVinci DA850
SoC.

* tag 'davinci-for-v3.8/dt' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: da850: generate dtbs for da850 boards
  ARM: davinci: add support for am1808 based EnBW CMC board
  ARM: davinci: da850 evm: add DT data
  ARM: davinci: da850: add SoC DT data
  ARM: davinci: da850: add DT boot support
  ARM: davinci: da8xx: add DA850 PRUSS support
  ARM: davinci: add platform hook to fetch the SRAM pool
  ARM: davinci: da850: changed SRAM allocator to shared ram.
  ARM: davinci: sram: switch from iotable to ioremapped regions
  uio: uio_pruss: replace private SRAM API with genalloc
  ARM: davinci: serial: provide API to initialze UART clocks
  ARM: davinci: convert platform code to use clk_prepare/clk_unprepare

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/davinci.txt

@@ -0,0 +1,17 @@
+Texas Instruments DaVinci Platforms Device Tree Bindings
+--------------------------------------------------------
+
+DA850/OMAP-L138/AM18x Evaluation Module (EVM) board
+Required root node properties:
+    - compatible = "ti,da850-evm", "ti,da850";
+
+EnBW AM1808 based CMC board
+Required root node properties:
+    - compatible = "enbw,cmc", "ti,da850;
+
+Generic DaVinci Boards
+----------------------
+
+DA850/OMAP-L138/AM18x generic board
+Required root node properties:
+    - compatible = "ti,da850";

arch/arm/Kconfig

@@ -911,6 +911,7 @@ config ARCH_DAVINCI
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
 	select NEED_MACH_GPIO_H
+	select USE_OF
 	select ZONE_DMA
 	help
 	  Support for TI's DaVinci platform.

arch/arm/boot/dts/da850-enbw-cmc.dts

@@ -0,0 +1,30 @@
+/*
+ * Device Tree for AM1808 EnBW CMC board
+ *
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/dts-v1/;
+/include/ "da850.dtsi"
+
+/ {
+	compatible = "enbw,cmc", "ti,da850";
+	model = "EnBW CMC";
+
+	soc {
+		serial0: serial@1c42000 {
+			status = "okay";
+		};
+		serial1: serial@1d0c000 {
+			status = "okay";
+		};
+		serial2: serial@1d0d000 {
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/da850-evm.dts

@@ -0,0 +1,28 @@
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation, version 2.
+ */
+/dts-v1/;
+/include/ "da850.dtsi"
+
+/ {
+	compatible = "ti,da850-evm", "ti,da850";
+	model = "DA850/AM1808/OMAP-L138 EVM";
+
+	soc {
+		serial0: serial@1c42000 {
+			status = "okay";
+		};
+		serial1: serial@1d0c000 {
+			status = "okay";
+		};
+		serial2: serial@1d0d000 {
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/da850.dtsi

@@ -0,0 +1,60 @@
+/*
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+	arm {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		intc: interrupt-controller {
+			compatible = "ti,cp-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,intc-size = <100>;
+			reg = <0xfffee000 0x2000>;
+		};
+	};
+	soc {
+		compatible = "simple-bus";
+		model = "da850";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x01c00000 0x400000>;
+
+		serial0: serial@1c42000 {
+			compatible = "ns16550a";
+			reg = <0x42000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			interrupt-parent = <&intc>;
+			status = "disabled";
+		};
+		serial1: serial@1d0c000 {
+			compatible = "ns16550a";
+			reg = <0x10c000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <53>;
+			interrupt-parent = <&intc>;
+			status = "disabled";
+		};
+		serial2: serial@1d0d000 {
+			compatible = "ns16550a";
+			reg = <0x10d000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <61>;
+			interrupt-parent = <&intc>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/mach-davinci/Kconfig

@@ -58,6 +58,14 @@ config ARCH_DAVINCI_TNETV107X
 
 comment "DaVinci Board Type"
 
+config MACH_DA8XX_DT
+	bool "Support DA8XX platforms using device tree"
+	default y
+	depends on ARCH_DAVINCI_DA8XX
+	help
+	  Say y here to include support for TI DaVinci DA850 based using
+	  Flattened Device Tree. More information at Documentation/devicetree
+
 config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
 	default ARCH_DAVINCI_DM644x

arch/arm/mach-davinci/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
+obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o

arch/arm/mach-davinci/Makefile.boot

@@ -11,3 +11,5 @@ else
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x80800000
 endif
+
+dtb-$(CONFIG_MACH_DA8XX_DT)	+= da850-enbw-cmc.dtb da850-evm.dtb

arch/arm/mach-davinci/board-dm355-evm.c

@@ -324,7 +324,7 @@ static __init void dm355_evm_init(void)
 	if (IS_ERR(aemif))
 		WARN("%s: unable to get AEMIF clock\n", __func__);
 	else
-		clk_enable(aemif);
+		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -246,7 +246,7 @@ static __init void dm355_leopard_init(void)
 	if (IS_ERR(aemif))
 		WARN("%s: unable to get AEMIF clock\n", __func__);
 	else
-		clk_enable(aemif);
+		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_leopard_devices,
 			     ARRAY_SIZE(davinci_leopard_devices));

arch/arm/mach-davinci/board-dm365-evm.c

@@ -478,7 +478,7 @@ static void __init evm_init_cpld(void)
 	aemif_clk = clk_get(NULL, "aemif");
 	if (IS_ERR(aemif_clk))
 		return;
-	clk_enable(aemif_clk);
+	clk_prepare_enable(aemif_clk);
 
 	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
 			"cpld") == NULL)
@@ -489,7 +489,7 @@ static void __init evm_init_cpld(void)
 				SECTION_SIZE);
 fail:
 		pr_err("ERROR: can't map CPLD\n");
-		clk_disable(aemif_clk);
+		clk_disable_unprepare(aemif_clk);
 		return;
 	}
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -776,7 +776,7 @@ static __init void davinci_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	aemif_clk = clk_get(NULL, "aemif");
-	clk_enable(aemif_clk);
+	clk_prepare_enable(aemif_clk);
 
 	if (HAS_ATA) {
 		if (HAS_NAND || HAS_NOR)

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -188,7 +188,7 @@ static __init void davinci_ntosd2_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	aemif_clk = clk_get(NULL, "aemif");
-	clk_enable(aemif_clk);
+	clk_prepare_enable(aemif_clk);
 
 	if (HAS_ATA) {
 		if (HAS_NAND)

arch/arm/mach-davinci/da850.c

@@ -212,6 +212,12 @@ static struct clk tptc2_clk = {
 	.flags		= ALWAYS_ENABLED,
 };
 
+static struct clk pruss_clk = {
+	.name		= "pruss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_PRUSS,
+};
+
 static struct clk uart0_clk = {
 	.name		= "uart0",
 	.parent		= &pll0_sysclk2,
@@ -385,6 +391,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"tptc1",	&tptc1_clk),
 	CLK(NULL,		"tpcc1",	&tpcc1_clk),
 	CLK(NULL,		"tptc2",	&tptc2_clk),
+	CLK("pruss_uio",	"pruss",	&pruss_clk),
 	CLK(NULL,		"uart0",	&uart0_clk),
 	CLK(NULL,		"uart1",	&uart1_clk),
 	CLK(NULL,		"uart2",	&uart2_clk),
@@ -781,12 +788,6 @@ static struct map_desc da850_io_desc[] = {
 		.length		= DA8XX_CP_INTC_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(DA8XX_ARM_RAM_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE
-	},
 };
 
 static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
@@ -1239,8 +1240,8 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
-	.sram_dma		= DA8XX_ARM_RAM_BASE,
-	.sram_len		= SZ_8K,
+	.sram_dma		= DA8XX_SHARED_RAM_BASE,
+	.sram_len		= SZ_128K,
 };
 
 void __init da850_init(void)

arch/arm/mach-davinci/da8xx-dt.c

@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Modified from mach-omap/omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+#define DA8XX_NUM_UARTS	3
+
+void __init da8xx_uart_clk_enable(void)
+{
+	int i;
+	for (i = 0; i < DA8XX_NUM_UARTS; i++)
+		davinci_serial_setup_clk(i, NULL);
+}
+
+static struct of_device_id da8xx_irq_match[] __initdata = {
+	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
+	{ }
+};
+
+static void __init da8xx_init_irq(void)
+{
+	of_irq_init(da8xx_irq_match);
+}
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+
+static void __init da850_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	da8xx_uart_clk_enable();
+}
+
+static const char *da850_boards_compat[] __initdata = {
+	"enbw,cmc",
+	"ti,da850-evm",
+	"ti,da850",
+	NULL,
+};
+
+DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
+	.map_io		= da850_init,
+	.init_irq	= da8xx_init_irq,
+	.timer		= &davinci_timer,
+	.init_machine	= da850_init_machine,
+	.dt_compat	= da850_boards_compat,
+	.init_late	= davinci_init_late,
+	.restart	= da8xx_restart,
+MACHINE_END
+
+#endif

arch/arm/mach-davinci/devices-da8xx.c

@@ -22,6 +22,7 @@
 #include <mach/time.h>
 #include <mach/da8xx.h>
 #include <mach/cpuidle.h>
+#include <mach/sram.h>
 
 #include "clock.h"
 #include "asp.h"
@@ -32,6 +33,7 @@
 #define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
 #define DA8XX_I2C0_BASE			0x01c22000
 #define DA8XX_RTC_BASE			0x01c23000
+#define DA8XX_PRUSS_MEM_BASE		0x01c30000
 #define DA8XX_MMCSD0_BASE		0x01c40000
 #define DA8XX_SPI0_BASE			0x01c41000
 #define DA830_SPI1_BASE			0x01e12000
@@ -518,6 +520,75 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
 	}
 }
 
+static struct resource da8xx_pruss_resources[] = {
+	{
+		.start	= DA8XX_PRUSS_MEM_BASE,
+		.end	= DA8XX_PRUSS_MEM_BASE + 0xFFFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT0,
+		.end	= IRQ_DA8XX_EVTOUT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT1,
+		.end	= IRQ_DA8XX_EVTOUT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT2,
+		.end	= IRQ_DA8XX_EVTOUT2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT3,
+		.end	= IRQ_DA8XX_EVTOUT3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT4,
+		.end	= IRQ_DA8XX_EVTOUT4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT5,
+		.end	= IRQ_DA8XX_EVTOUT5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT6,
+		.end	= IRQ_DA8XX_EVTOUT6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT7,
+		.end	= IRQ_DA8XX_EVTOUT7,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct uio_pruss_pdata da8xx_uio_pruss_pdata = {
+	.pintc_base	= 0x4000,
+};
+
+static struct platform_device da8xx_uio_pruss_dev = {
+	.name		= "pruss_uio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_pruss_resources),
+	.resource	= da8xx_pruss_resources,
+	.dev		= {
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &da8xx_uio_pruss_pdata,
+	}
+};
+
+int __init da8xx_register_uio_pruss(void)
+{
+	da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool();
+	return platform_device_register(&da8xx_uio_pruss_dev);
+}
+
 static const struct display_panel disp_panel = {
 	QVGA,
 	16,
@@ -900,7 +971,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr)
 	if (IS_ERR(da850_sata_clk))
 		return PTR_ERR(da850_sata_clk);
 
-	ret = clk_enable(da850_sata_clk);
+	ret = clk_prepare_enable(da850_sata_clk);
 	if (ret)
 		goto err0;
 
@@ -931,7 +1002,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr)
 	return 0;
 
 err1:
-	clk_disable(da850_sata_clk);
+	clk_disable_unprepare(da850_sata_clk);
 err0:
 	clk_put(da850_sata_clk);
 	return ret;
@@ -939,7 +1010,7 @@ err0:
 
 static void da850_sata_exit(struct device *dev)
 {
-	clk_disable(da850_sata_clk);
+	clk_disable_unprepare(da850_sata_clk);
 	clk_put(da850_sata_clk);
 }
 

arch/arm/mach-davinci/dm355.c

@@ -758,12 +758,6 @@ static struct map_desc dm355_io_desc[] = {
 		.length		= IO_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
 };
 
 /* Contents of JTAG ID register used to identify exact cpu type */

arch/arm/mach-davinci/dm365.c

@@ -985,12 +985,6 @@ static struct map_desc dm365_io_desc[] = {
 		.length		= IO_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
 };
 
 static struct resource dm365_ks_resources[] = {

arch/arm/mach-davinci/dm644x.c

@@ -786,12 +786,6 @@ static struct map_desc dm644x_io_desc[] = {
 		.length		= IO_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00008000),
-		.length		= SZ_16K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
 };
 
 /* Contents of JTAG ID register used to identify exact cpu type */

arch/arm/mach-davinci/dm646x.c

@@ -756,12 +756,6 @@ static struct map_desc dm646x_io_desc[] = {
 		.length		= IO_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
 };
 
 /* Contents of JTAG ID register used to identify exact cpu type */

arch/arm/mach-davinci/include/mach/common.h

@@ -104,8 +104,6 @@ int davinci_pm_init(void);
 static inline int davinci_pm_init(void) { return 0; }
 #endif
 
-/* standard place to map on-chip SRAMs; they *may* support DMA */
-#define SRAM_VIRT	0xfffe0000
 #define SRAM_SIZE	SZ_128K
 
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -26,6 +26,7 @@
 #include <linux/platform_data/mmc-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/uio_pruss.h>
 
 #include <media/davinci/vpif_types.h>
 
@@ -72,6 +73,7 @@ extern unsigned int da850_max_speed;
 #define DA8XX_AEMIF_CS2_BASE	0x60000000
 #define DA8XX_AEMIF_CS3_BASE	0x62000000
 #define DA8XX_AEMIF_CTL_BASE	0x68000000
+#define DA8XX_SHARED_RAM_BASE	0x80000000
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
 void __init da830_init(void);
@@ -86,6 +88,7 @@ int da8xx_register_watchdog(void);
 int da8xx_register_usb20(unsigned mA, unsigned potpgt);
 int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
 int da8xx_register_emac(void);
+int da8xx_register_uio_pruss(void);
 int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
 int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
 int da850_register_mmcsd1(struct davinci_mmc_config *config);

arch/arm/mach-davinci/include/mach/serial.h

@@ -43,6 +43,7 @@ struct davinci_uart_config {
 };
 
 extern int davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate);
 #endif
 
 #endif /* __ASM_ARCH_SERIAL_H */

arch/arm/mach-davinci/include/mach/sram.h

@@ -24,4 +24,7 @@
 extern void *sram_alloc(size_t len, dma_addr_t *dma);
 extern void sram_free(void *addr, size_t len);
 
+/* Get the struct gen_pool * for use in platform data */
+extern struct gen_pool *sram_get_gen_pool(void);
+
 #endif /* __MACH_SRAM_H */

arch/arm/mach-davinci/serial.c

@@ -70,11 +70,33 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 				 UART_DM646X_SCR_TX_WATERMARK);
 }
 
-int __init davinci_serial_init(struct davinci_uart_config *info)
+/* Enable UART clock and obtain its rate */
+int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
 {
-	int i;
 	char name[16];
-	struct clk *uart_clk;
+	struct clk *clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct device *dev = &soc_info->serial_dev->dev;
+
+	sprintf(name, "uart%d", instance);
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk)) {
+		pr_err("%s:%d: failed to get UART%d clock\n",
+					__func__, __LINE__, instance);
+		return PTR_ERR(clk);
+	}
+
+	clk_prepare_enable(clk);
+
+	if (rate)
+		*rate = clk_get_rate(clk);
+
+	return 0;
+}
+
+int __init davinci_serial_init(struct davinci_uart_config *info)
+{
+	int i, ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	struct device *dev = &soc_info->serial_dev->dev;
 	struct plat_serial8250_port *p = dev->platform_data;
@@ -87,16 +109,9 @@ int __init davinci_serial_init(struct davinci_uart_config *info)
 		if (!(info->enabled_uarts & (1 << i)))
 			continue;
 
-		sprintf(name, "uart%d", i);
-		uart_clk = clk_get(dev, name);
-		if (IS_ERR(uart_clk)) {
-			printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
-					__func__, __LINE__, i);
+		ret = davinci_serial_setup_clk(i, &p->uartclk);
+		if (ret)
 			continue;
-		}
-
-		clk_enable(uart_clk);
-		p->uartclk = clk_get_rate(uart_clk);
 
 		if (!p->membase && p->mapbase) {
 			p->membase = ioremap(p->mapbase, SZ_4K);

arch/arm/mach-davinci/sram.c

@@ -10,6 +10,7 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/genalloc.h>
 
 #include <mach/common.h>
@@ -17,6 +18,11 @@
 
 static struct gen_pool *sram_pool;
 
+struct gen_pool *sram_get_gen_pool(void)
+{
+	return sram_pool;
+}
+
 void *sram_alloc(size_t len, dma_addr_t *dma)
 {
 	unsigned long vaddr;
@@ -32,7 +38,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma)
 		return NULL;
 
 	if (dma)
-		*dma = dma_base + (vaddr - SRAM_VIRT);
+		*dma = gen_pool_virt_to_phys(sram_pool, vaddr);
 	return (void *)vaddr;
 
 }
@@ -53,8 +59,10 @@ EXPORT_SYMBOL(sram_free);
  */
 static int __init sram_init(void)
 {
+	phys_addr_t phys = davinci_soc_info.sram_dma;
 	unsigned len = davinci_soc_info.sram_len;
 	int status = 0;
+	void *addr;
 
 	if (len) {
 		len = min_t(unsigned, len, SRAM_SIZE);
@@ -62,8 +70,17 @@ static int __init sram_init(void)
 		if (!sram_pool)
 			status = -ENOMEM;
 	}
-	if (sram_pool)
-		status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+
+	if (sram_pool) {
+		addr = ioremap(phys, len);
+		if (!addr)
+			return -ENOMEM;
+		status = gen_pool_add_virt(sram_pool, (unsigned)addr,
+					   phys, len, -1);
+		if (status < 0)
+			iounmap(addr);
+	}
+
 	WARN_ON(status < 0);
 	return status;
 }

arch/arm/mach-davinci/time.c

@@ -379,7 +379,7 @@ static void __init davinci_timer_init(void)
 
 	timer_clk = clk_get(NULL, "timer0");
 	BUG_ON(IS_ERR(timer_clk));
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	/* init timer hw */
 	timer_init();
@@ -429,7 +429,7 @@ void davinci_watchdog_reset(struct platform_device *pdev)
 	wd_clk = clk_get(&pdev->dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
-	clk_enable(wd_clk);
+	clk_prepare_enable(wd_clk);
 
 	/* disable, internal clock source */
 	__raw_writel(0, base + TCR);

drivers/uio/Kconfig

@@ -97,6 +97,7 @@ config UIO_NETX
 config UIO_PRUSS
 	tristate "Texas Instruments PRUSS driver"
 	depends on ARCH_DAVINCI_DA850
+	select GENERIC_ALLOCATOR
 	help
 	  PRUSS driver for OMAPL138/DA850/AM18XX devices
 	  PRUSS driver requires user space components, examples and user space

drivers/uio/uio_pruss.c

@@ -25,7 +25,7 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <mach/sram.h>
+#include <linux/genalloc.h>
 
 #define DRV_NAME "pruss_uio"
 #define DRV_VERSION "1.0"
@@ -65,10 +65,11 @@ struct uio_pruss_dev {
 	dma_addr_t sram_paddr;
 	dma_addr_t ddr_paddr;
 	void __iomem *prussio_vaddr;
-	void *sram_vaddr;
+	unsigned long sram_vaddr;
 	void *ddr_vaddr;
 	unsigned int hostirq_start;
 	unsigned int pintc_base;
+	struct gen_pool *sram_pool;
 };
 
 static irqreturn_t pruss_handler(int irq, struct uio_info *info)
@@ -106,7 +107,9 @@ static void pruss_cleanup(struct platform_device *dev,
 			gdev->ddr_paddr);
 	}
 	if (gdev->sram_vaddr)
-		sram_free(gdev->sram_vaddr, sram_pool_sz);
+		gen_pool_free(gdev->sram_pool,
+			      gdev->sram_vaddr,
+			      sram_pool_sz);
 	kfree(gdev->info);
 	clk_put(gdev->pruss_clk);
 	kfree(gdev);
@@ -152,10 +155,17 @@ static int __devinit pruss_probe(struct platform_device *dev)
 		goto out_free;
 	}
 
-	gdev->sram_vaddr = sram_alloc(sram_pool_sz, &(gdev->sram_paddr));
-	if (!gdev->sram_vaddr) {
-		dev_err(&dev->dev, "Could not allocate SRAM pool\n");
-		goto out_free;
+	if (pdata->sram_pool) {
+		gdev->sram_pool = pdata->sram_pool;
+		gdev->sram_vaddr =
+			gen_pool_alloc(gdev->sram_pool, sram_pool_sz);
+		if (!gdev->sram_vaddr) {
+			dev_err(&dev->dev, "Could not allocate SRAM pool\n");
+			goto out_free;
+		}
+		gdev->sram_paddr =
+			gen_pool_virt_to_phys(gdev->sram_pool,
+					      gdev->sram_vaddr);
 	}
 
 	gdev->ddr_vaddr = dma_alloc_coherent(&dev->dev, extram_pool_sz,

include/linux/platform_data/uio_pruss.h

@@ -20,6 +20,7 @@
 
 /* To configure the PRUSS INTC base offset for UIO driver */
 struct uio_pruss_pdata {
-	u32	pintc_base;
+	u32		pintc_base;
+	struct gen_pool *sram_pool;
 };
 #endif /* _UIO_PRUSS_H_ */