Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	net/bluetooth/l2cap_core.c

CREDITS

@@ -518,7 +518,7 @@ N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound
 
-M: David Brownell
+N: David Brownell
 D: Kernel engineer, mentor, and friend.  Maintained USB EHCI and
 D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
 D: device drivers.  His encouragement also helped many engineers get

Documentation/Changes

@@ -2,13 +2,7 @@ Intro
 =====
 
 This document is designed to provide a list of the minimum levels of
-software necessary to run the 2.6 kernels, as well as provide brief
-instructions regarding any other "Gotchas" users may encounter when
-trying life on the Bleeding Edge.  If upgrading from a pre-2.4.x
-kernel, please consult the Changes file included with 2.4.x kernels for
-additional information; most of that information will not be repeated
-here.  Basically, this document assumes that your system is already
-functional and running at least 2.4.x kernels.
+software necessary to run the 3.0 kernels.
 
 This document is originally based on my "Changes" file for 2.0.x kernels
 and therefore owes credit to the same people as that file (Jared Mauch,
@@ -22,11 +16,10 @@ Upgrade to at *least* these software revisions before thinking you've
 encountered a bug!  If you're unsure what version you're currently
 running, the suggested command should tell you.
 
-Again, keep in mind that this list assumes you are already
-functionally running a Linux 2.4 kernel.  Also, not all tools are
-necessary on all systems; obviously, if you don't have any ISDN
-hardware, for example, you probably needn't concern yourself with
-isdn4k-utils.
+Again, keep in mind that this list assumes you are already functionally
+running a Linux kernel.  Also, not all tools are necessary on all
+systems; obviously, if you don't have any ISDN hardware, for example,
+you probably needn't concern yourself with isdn4k-utils.
 
 o  Gnu C                  3.2                     # gcc --version
 o  Gnu make               3.80                    # make --version
@@ -114,12 +107,12 @@ Ksymoops
 
 If the unthinkable happens and your kernel oopses, you may need the
 ksymoops tool to decode it, but in most cases you don't.
-In the 2.6 kernel it is generally preferred to build the kernel with
-CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is
-(this also produces better output than ksymoops).
-If for some reason your kernel is not build with CONFIG_KALLSYMS and
-you have no way to rebuild and reproduce the Oops with that option, then
-you can still decode that Oops with ksymoops.
+It is generally preferred to build the kernel with CONFIG_KALLSYMS so
+that it produces readable dumps that can be used as-is (this also
+produces better output than ksymoops).  If for some reason your kernel
+is not build with CONFIG_KALLSYMS and you have no way to rebuild and
+reproduce the Oops with that option, then you can still decode that Oops
+with ksymoops.
 
 Module-Init-Tools
 -----------------
@@ -261,8 +254,8 @@ needs to be recompiled or (preferably) upgraded.
 NFS-utils
 ---------
 
-In 2.4 and earlier kernels, the nfs server needed to know about any
-client that expected to be able to access files via NFS.  This
+In ancient (2.4 and earlier) kernels, the nfs server needed to know
+about any client that expected to be able to access files via NFS.  This
 information would be given to the kernel by "mountd" when the client
 mounted the filesystem, or by "exportfs" at system startup.  exportfs
 would take information about active clients from /var/lib/nfs/rmtab.
@@ -272,11 +265,11 @@ which is not always easy, particularly when trying to implement
 fail-over.  Even when the system is working well, rmtab suffers from
 getting lots of old entries that never get removed.
 
-With 2.6 we have the option of having the kernel tell mountd when it
-gets a request from an unknown host, and mountd can give appropriate
-export information to the kernel.  This removes the dependency on
-rmtab and means that the kernel only needs to know about currently
-active clients.
+With modern kernels we have the option of having the kernel tell mountd
+when it gets a request from an unknown host, and mountd can give
+appropriate export information to the kernel.  This removes the
+dependency on rmtab and means that the kernel only needs to know about
+currently active clients.
 
 To enable this new functionality, you need to:
 

Documentation/CodingStyle

@@ -680,8 +680,8 @@ ones already enabled by DEBUG.
 		Chapter 14: Allocating memory
 
 The kernel provides the following general purpose memory allocators:
-kmalloc(), kzalloc(), kcalloc(), and vmalloc().  Please refer to the API
-documentation for further information about them.
+kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc().  Please refer to
+the API documentation for further information about them.
 
 The preferred form for passing a size of a struct is the following:
 

Documentation/cgroups/blkio-controller.txt

@@ -77,7 +77,7 @@ Throttling/Upper Limit policy
 - Specify a bandwidth rate on particular device for root group. The format
   for policy is "<major>:<minor>  <byes_per_second>".
 
-        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device
+        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
 
   Above will put a limit of 1MB/second on reads happening for root group
   on device having major/minor number 8:16.
@@ -90,7 +90,7 @@ Throttling/Upper Limit policy
         1024+0 records out
         4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
 
- Limits for writes can be put using blkio.write_bps_device file.
+ Limits for writes can be put using blkio.throttle.write_bps_device file.
 
 Hierarchical Cgroups
 ====================
@@ -286,28 +286,28 @@ Throttling/Upper limit policy files
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.read_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
 
 - blkio.throttle.write_bps_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.write_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
 
 - blkio.throttle.read_iops_device
 	- Specifies upper limit on READ rate from the device. IO rate is
 	  specified in IO per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.read_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
 
 - blkio.throttle.write_iops_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in io per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.write_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
 
 Note: If both BW and IOPS rules are specified for a device, then IO is
       subjectd to both the constraints.

Documentation/feature-removal-schedule.txt

@@ -583,3 +583,25 @@ Why:	Superseded by the UVCIOC_CTRL_QUERY ioctl.
 Who:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 ----------------------------
+
+What:	For VIDIOC_S_FREQUENCY the type field must match the device node's type.
+	If not, return -EINVAL.
+When:	3.2
+Why:	It makes no sense to switch the tuner to radio mode by calling
+	VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
+	calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
+	move to more consistent handling of tv and radio tuners.
+Who:	Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------
+
+What:	Opening a radio device node will no longer automatically switch the
+	tuner mode from tv to radio.
+When:	3.3
+Why:	Just opening a V4L device should not change the state of the hardware
+	like that. It's very unexpected and against the V4L spec. Instead, you
+	switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second
+	and last step of the move to consistent handling of tv and radio tuners.
+Who:	Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------

Documentation/filesystems/caching/netfs-api.txt

@@ -673,6 +673,22 @@ storage request to complete, or it may attempt to cancel the storage request -
 in which case the page will not be stored in the cache this time.
 
 
+BULK INODE PAGE UNCACHE
+-----------------------
+
+A convenience routine is provided to perform an uncache on all the pages
+attached to an inode.  This assumes that the pages on the inode correspond on a
+1:1 basis with the pages in the cache.
+
+	void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+					     struct inode *inode);
+
+This takes the netfs cookie that the pages were cached with and the inode that
+the pages are attached to.  This function will wait for pages to finish being
+written to the cache and for the cache to finish with the page generally.  No
+error is returned.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================

Documentation/hwmon/f71882fg

@@ -22,6 +22,10 @@ Supported chips:
     Prefix: 'f71869'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71869A
+    Prefix: 'f71869a'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Not public
   * Fintek F71882FG and F71883FG
     Prefix: 'f71882fg'
     Addresses scanned: none, address read from Super I/O config space

Documentation/hwmon/k10temp

@@ -9,8 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
-* AMD Family 12h processors: "Llano"
-* AMD Family 14h processors: "Brazos" (C/E/G-Series)
+* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
+* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
 * AMD Family 15h processors: "Bulldozer"
 
   Prefix: 'k10temp'
@@ -20,12 +20,16 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors:
+    http://support.amd.com/us/Processor_TechDocs/41131.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 12h Processors:
+    http://support.amd.com/us/Processor_TechDocs/44739.pdf
   Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:

Documentation/kernel-parameters.txt

@@ -2015,6 +2015,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the default.
 				off: Turn ECRC off
 				on: Turn ECRC on.
+		realloc		reallocate PCI resources if allocations done by BIOS
+				are erroneous.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.

Documentation/laptops/thinkpad-acpi.txt

@@ -534,6 +534,8 @@ Events that are never propagated by the driver:
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
 0x5010		Brightness level changed/control event
+0x6000		KEYBOARD: Numlock key pressed
+0x6005		KEYBOARD: Fn key pressed (TO BE VERIFIED)
 
 Events that are propagated by the driver to userspace:
 
@@ -545,6 +547,8 @@ Events that are propagated by the driver to userspace:
 0x3006		Bay hotplug request (hint to power up SATA link when
 		the optical drive tray is ejected)
 0x4003		Undocked (see 0x2x04), can sleep again
+0x4010		Docked into hotplug port replicator (non-ACPI dock)
+0x4011		Undocked from hotplug port replicator (non-ACPI dock)
 0x500B		Tablet pen inserted into its storage bay
 0x500C		Tablet pen removed from its storage bay
 0x6011		ALARM: battery is too hot
@@ -552,6 +556,7 @@ Events that are propagated by the driver to userspace:
 0x6021		ALARM: a sensor is too hot
 0x6022		ALARM: a sensor is extremely hot
 0x6030		System thermal table changed
+0x6040		Nvidia Optimus/AC adapter related (TO BE VERIFIED)
 
 Battery nearly empty alarms are a last resort attempt to get the
 operating system to hibernate or shutdown cleanly (0x2313), or shutdown

Documentation/networking/ip-sysctl.txt

@@ -336,7 +336,7 @@ tcp_orphan_retries - INTEGER
 	when RTO retransmissions remain unacknowledged.
 	See tcp_retries2 for more details.
 
-	The default value is 7.
+	The default value is 8.
 	If your machine is a loaded WEB server,
 	you should think about lowering this value, such sockets
 	may consume significant resources. Cf. tcp_max_orphans.

Documentation/power/runtime_pm.txt

@@ -501,13 +501,29 @@ helper functions described in Section 4.  In that case, pm_runtime_resume()
 should be used.  Of course, for this purpose the device's run-time PM has to be
 enabled earlier by calling pm_runtime_enable().
 
-If the device bus type's or driver's ->probe() or ->remove() callback runs
+If the device bus type's or driver's ->probe() callback runs
 pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
 they will fail returning -EAGAIN, because the device's usage counter is
-incremented by the core before executing ->probe() and ->remove().  Still, it
-may be desirable to suspend the device as soon as ->probe() or ->remove() has
-finished, so the PM core uses pm_runtime_idle_sync() to invoke the
-subsystem-level idle callback for the device at that time.
+incremented by the driver core before executing ->probe().  Still, it may be
+desirable to suspend the device as soon as ->probe() has finished, so the driver
+core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for
+the device at that time.
+
+Moreover, the driver core prevents runtime PM callbacks from racing with the bus
+notifier callback in __device_release_driver(), which is necessary, because the
+notifier is used by some subsystems to carry out operations affecting the
+runtime PM functionality.  It does so by calling pm_runtime_get_sync() before
+driver_sysfs_remove() and the BUS_NOTIFY_UNBIND_DRIVER notifications.  This
+resumes the device if it's in the suspended state and prevents it from
+being suspended again while those routines are being executed.
+
+To allow bus types and drivers to put devices into the suspended state by
+calling pm_runtime_suspend() from their ->remove() routines, the driver core
+executes pm_runtime_put_sync() after running the BUS_NOTIFY_UNBIND_DRIVER
+notifications in __device_release_driver().  This requires bus types and
+drivers to make their ->remove() callbacks avoid races with runtime PM directly,
+but also it allows of more flexibility in the handling of devices during the
+removal of their drivers.
 
 The user space can effectively disallow the driver of the device to power manage
 it at run time by changing the value of its /sys/devices/.../power/control

Documentation/spinlocks.txt

@@ -13,18 +13,8 @@ static DEFINE_SPINLOCK(xxx_lock);
 The above is always safe. It will disable interrupts _locally_, but the
 spinlock itself will guarantee the global lock, so it will guarantee that
 there is only one thread-of-control within the region(s) protected by that
-lock. This works well even under UP. The above sequence under UP
-essentially is just the same as doing
-
-	unsigned long flags;
-
-	save_flags(flags); cli();
-	 ... critical section ...
-	restore_flags(flags);
-
-so the code does _not_ need to worry about UP vs SMP issues: the spinlocks
-work correctly under both (and spinlocks are actually more efficient on
-architectures that allow doing the "save_flags + cli" in one operation).
+lock. This works well even under UP also, so the code does _not_ need to
+worry about UP vs SMP issues: the spinlocks work correctly under both.
 
    NOTE! Implications of spin_locks for memory are further described in:
 
@@ -36,27 +26,7 @@ The above is usually pretty simple (you usually need and want only one
 spinlock for most things - using more than one spinlock can make things a
 lot more complex and even slower and is usually worth it only for
 sequences that you _know_ need to be split up: avoid it at all cost if you
-aren't sure). HOWEVER, it _does_ mean that if you have some code that does
-
-	cli();
-	.. critical section ..
-	sti();
-
-and another sequence that does
-
-	spin_lock_irqsave(flags);
-	.. critical section ..
-	spin_unlock_irqrestore(flags);
-
-then they are NOT mutually exclusive, and the critical regions can happen
-at the same time on two different CPU's. That's fine per se, but the
-critical regions had better be critical for different things (ie they
-can't stomp on each other).
-
-The above is a problem mainly if you end up mixing code - for example the
-routines in ll_rw_block() tend to use cli/sti to protect the atomicity of
-their actions, and if a driver uses spinlocks instead then you should
-think about issues like the above.
+aren't sure).
 
 This is really the only really hard part about spinlocks: once you start
 using spinlocks they tend to expand to areas you might not have noticed
@@ -120,11 +90,10 @@ Lesson 3: spinlocks revisited.
 
 The single spin-lock primitives above are by no means the only ones. They
 are the most safe ones, and the ones that work under all circumstances,
-but partly _because_ they are safe they are also fairly slow. They are
-much faster than a generic global cli/sti pair, but slower than they'd
-need to be, because they do have to disable interrupts (which is just a
-single instruction on a x86, but it's an expensive one - and on other
-architectures it can be worse).
+but partly _because_ they are safe they are also fairly slow. They are slower
+than they'd need to be, because they do have to disable interrupts
+(which is just a single instruction on a x86, but it's an expensive one -
+and on other architectures it can be worse).
 
 If you have a case where you have to protect a data structure across
 several CPU's and you want to use spinlocks you can potentially use

MAINTAINERS

@@ -594,6 +594,16 @@ S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PMU PROFILING AND DEBUGGING
+M:	Will Deacon <will.deacon@arm.com>
+S:	Maintained
+F:	arch/arm/kernel/perf_event*
+F:	arch/arm/oprofile/common.c
+F:	arch/arm/kernel/pmu.c
+F:	arch/arm/include/asm/pmu.h
+F:	arch/arm/kernel/hw_breakpoint.c
+F:	arch/arm/include/asm/hw_breakpoint.h
+
 ARM PORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2197,7 +2207,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
+T:	quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/
 
@@ -4982,7 +4992,7 @@ F:	drivers/power/power_supply*
 
 PNP SUPPORT
 M:	Adam Belay <abelay@mit.edu>
-M:	Bjorn Helgaas <bjorn.helgaas@hp.com>
+M:	Bjorn Helgaas <bhelgaas@google.com>
 S:	Maintained
 F:	drivers/pnp/
 
@@ -6733,6 +6743,7 @@ F:	fs/fat/
 VIDEOBUF2 FRAMEWORK
 M:	Pawel Osciak <pawel@osciak.com>
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/video/videobuf2-*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*

README

@@ -1,6 +1,6 @@
-	Linux kernel release 2.6.xx <http://kernel.org/>
+	Linux kernel release 3.x <http://kernel.org/>
 
-These are the release notes for Linux version 2.6.  Read them carefully,
+These are the release notes for Linux version 3.  Read them carefully,
 as they tell you what this is all about, explain how to install the
 kernel, and what to do if something goes wrong. 
 
@@ -62,10 +62,10 @@ INSTALLING the kernel source:
    directory where you have permissions (eg. your home directory) and
    unpack it:
 
-		gzip -cd linux-2.6.XX.tar.gz | tar xvf -
+		gzip -cd linux-3.X.tar.gz | tar xvf -
 
    or
-		bzip2 -dc linux-2.6.XX.tar.bz2 | tar xvf -
+		bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
 
 
    Replace "XX" with the version number of the latest kernel.
@@ -75,15 +75,15 @@ INSTALLING the kernel source:
    files.  They should match the library, and not get messed up by
    whatever the kernel-du-jour happens to be.
 
- - You can also upgrade between 2.6.xx releases by patching.  Patches are
+ - You can also upgrade between 3.x releases by patching.  Patches are
    distributed in the traditional gzip and the newer bzip2 format.  To
    install by patching, get all the newer patch files, enter the
-   top level directory of the kernel source (linux-2.6.xx) and execute:
+   top level directory of the kernel source (linux-3.x) and execute:
 
-		gzip -cd ../patch-2.6.xx.gz | patch -p1
+		gzip -cd ../patch-3.x.gz | patch -p1
 
    or
-		bzip2 -dc ../patch-2.6.xx.bz2 | patch -p1
+		bzip2 -dc ../patch-3.x.bz2 | patch -p1
 
    (repeat xx for all versions bigger than the version of your current
    source tree, _in_order_) and you should be ok.  You may want to remove
@@ -91,9 +91,9 @@ INSTALLING the kernel source:
    failed patches (xxx# or xxx.rej). If there are, either you or me has
    made a mistake.
 
-   Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels
+   Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
    (also known as the -stable kernels) are not incremental but instead apply
-   directly to the base 2.6.x kernel.  Please read
+   directly to the base 3.x kernel.  Please read
    Documentation/applying-patches.txt for more information.
 
    Alternatively, the script patch-kernel can be used to automate this
@@ -107,14 +107,14 @@ INSTALLING the kernel source:
    an alternative directory can be specified as the second argument.
 
  - If you are upgrading between releases using the stable series patches
-   (for example, patch-2.6.xx.y), note that these "dot-releases" are
-   not incremental and must be applied to the 2.6.xx base tree. For
-   example, if your base kernel is 2.6.12 and you want to apply the
-   2.6.12.3 patch, you do not and indeed must not first apply the
-   2.6.12.1 and 2.6.12.2 patches. Similarly, if you are running kernel
-   version 2.6.12.2 and want to jump to 2.6.12.3, you must first
-   reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying
-   the 2.6.12.3 patch.
+   (for example, patch-3.x.y), note that these "dot-releases" are
+   not incremental and must be applied to the 3.x base tree. For
+   example, if your base kernel is 3.0 and you want to apply the
+   3.0.3 patch, you do not and indeed must not first apply the
+   3.0.1 and 3.0.2 patches. Similarly, if you are running kernel
+   version 3.0.2 and want to jump to 3.0.3, you must first
+   reverse the 3.0.2 patch (that is, patch -R) _before_ applying
+   the 3.0.3 patch.
    You can read more on this in Documentation/applying-patches.txt
 
  - Make sure you have no stale .o files and dependencies lying around:
@@ -126,7 +126,7 @@ INSTALLING the kernel source:
 
 SOFTWARE REQUIREMENTS
 
-   Compiling and running the 2.6.xx kernels requires up-to-date
+   Compiling and running the 3.x kernels requires up-to-date
    versions of various software packages.  Consult
    Documentation/Changes for the minimum version numbers required
    and how to get updates for these packages.  Beware that using
@@ -142,11 +142,11 @@ BUILD directory for the kernel:
    Using the option "make O=output/dir" allow you to specify an alternate
    place for the output files (including .config).
    Example:
-     kernel source code:	/usr/src/linux-2.6.N
+     kernel source code:	/usr/src/linux-3.N
      build directory:		/home/name/build/kernel
 
    To configure and build the kernel use:
-   cd /usr/src/linux-2.6.N
+   cd /usr/src/linux-3.N
    make O=/home/name/build/kernel menuconfig
    make O=/home/name/build/kernel
    sudo make O=/home/name/build/kernel modules_install install

arch/arm/common/dmabounce.c

@@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		if (buf == 0) {
 			dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
 			       __func__, ptr);
-			return 0;
+			return ~0;
 		}
 
 		dev_dbg(dev,

arch/arm/kernel/perf_event.c

@@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event)
 static void armpmu_enable(struct pmu *pmu)
 {
 	/* Enable all of the perf events on hardware. */
-	int idx;
+	int idx, enabled = 0;
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
 	if (!armpmu)
@@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu)
 			continue;
 
 		armpmu->enable(&event->hw, idx);
+		enabled = 1;
 	}
 
-	armpmu->start();
+	if (enabled)
+		armpmu->start();
 }
 
 static void armpmu_disable(struct pmu *pmu)

arch/arm/kernel/setup.c

@@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup);
 #endif
 
 extern void paging_init(struct machine_desc *desc);
+extern void sanity_check_meminfo(void);
 extern void reboot_setup(char *str);
 
 unsigned int processor_id;
@@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
 	paging_init(mdesc);

arch/arm/kernel/smp_twd.c

@@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void)
 		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
-			(twd_timer_rate / 1000000) % 100);
+			(twd_timer_rate / 10000) % 100);
 	}
 }
 

arch/arm/mach-at91/at91cap9.c

@@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91cap9_devices.c

@@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91cap9_set_console_clock(portnr);
+		at91cap9_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91rm9200.c

@@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91rm9200_devices.c

@@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91rm9200_set_console_clock(portnr);
+		at91rm9200_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9260_set_console_clock(portnr);
+		at91sam9260_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9261_set_console_clock(portnr);
+		at91sam9261_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9263_devices.c

@@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9263_set_console_clock(portnr);
+		at91sam9263_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9g45.c

@@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = {
 static struct clk_lookup periph_clocks_lookups[] = {
 	/* One additional fake clock for ohci */
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9g45_set_console_clock(portnr);
+		at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9rl.c

@@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9rl_set_console_clock(portnr);
+		at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/board-cap9adk.c

@@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
-	cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
+	cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (cap9adk_nand_data.bus_width_16)
 		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9260ek.c

@@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9261ek.c

@@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9263ek.c

@@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9g20ek.c

@@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/include/mach/system_rev.h

@@ -13,13 +13,13 @@
  * the 16-31 bit are reserved for at91 generic information
  *
  * bit 31:
- *	0 => nand 16 bit
- *	1 => nand 8 bit
+ *	0 => nand 8 bit
+ *	1 => nand 16 bit
  */
-#define BOARD_HAVE_NAND_8BIT	(1 << 31)
-static int inline board_have_nand_8bit(void)
+#define BOARD_HAVE_NAND_16BIT	(1 << 31)
+static inline int board_have_nand_16bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_8BIT;
+	return system_rev & BOARD_HAVE_NAND_16BIT;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */

arch/arm/mach-davinci/irq.c

@@ -53,7 +53,7 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 
 	gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq);
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 

arch/arm/mach-ep93xx/core.c

@@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev,
 	unsigned int mcr;
 
 	mcr = 0;
-	if (!(mctrl & TIOCM_RTS))
+	if (mctrl & TIOCM_RTS)
 		mcr |= 2;
-	if (!(mctrl & TIOCM_DTR))
+	if (mctrl & TIOCM_DTR)
 		mcr |= 1;
 
 	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);

arch/arm/mach-exynos4/cpu.c

@@ -23,6 +23,7 @@
 #include <plat/sdhci.h>
 #include <plat/devs.h>
 #include <plat/fimc-core.h>
+#include <plat/iic-core.h>
 
 #include <mach/regs-irq.h>
 
@@ -132,6 +133,11 @@ void __init exynos4_map_io(void)
 	s3c_fimc_setname(1, "exynos4-fimc");
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
+
+	/* The I2C bus controllers are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
 }
 
 void __init exynos4_init_clocks(int xtal)

arch/arm/mach-exynos4/dev-audio.c

@@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = {
 
 static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3));
+	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
 
 	return 0;
 }

arch/arm/mach-exynos4/headsmp.S

@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
+	__CPUINIT
 
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
 	.max_width		= 8,
@@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
 	.max_width		= 8,

arch/arm/mach-mmp/pxa168.c

@@ -79,7 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
-static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 
 /* device and clock bindings */

arch/arm/mach-mmp/pxa910.c

@@ -110,7 +110,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
-static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(u2o, USB, 0x1b, 480000000);
 
 /* device and clock bindings */

arch/arm/mach-omap1/board-ams-delta.c

@@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
 	.delay		= 9,
 };
 
-static struct platform_device ams_delta_kp_device __initdata = {
+static struct platform_device ams_delta_kp_device = {
 	.name		= "omap-keypad",
 	.id		= -1,
 	.dev		= {
@@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = {
 	.resource	= ams_delta_kp_resources,
 };
 
-static struct platform_device ams_delta_lcd_device __initdata = {
+static struct platform_device ams_delta_lcd_device = {
 	.name	= "lcd_ams_delta",
 	.id	= -1,
 };
 
-static struct platform_device ams_delta_led_device __initdata = {
+static struct platform_device ams_delta_led_device = {
 	.name	= "ams-delta-led",
 	.id	= -1
 };
@@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = {
 	.power		= ams_delta_camera_power,
 };
 
-static struct platform_device ams_delta_camera_device __initdata = {
+static struct platform_device ams_delta_camera_device = {
 	.name   = "soc-camera-pdrv",
 	.id     = 0,
 	.dev    = {

arch/arm/mach-omap1/gpio15xx.c

@@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap15xx_mpu_gpio = {
+static struct platform_device omap15xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap15xx_gpio = {
+static struct platform_device omap15xx_gpio = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {

arch/arm/mach-omap1/gpio16xx.c

@@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap16xx_mpu_gpio = {
+static struct platform_device omap16xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio1 = {
+static struct platform_device omap16xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio2 = {
+static struct platform_device omap16xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio3 = {
+static struct platform_device omap16xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio4 = {
+static struct platform_device omap16xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {

arch/arm/mach-omap1/gpio7xx.c

@@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.bank_stride		= 2,
 };
 
-static struct __initdata platform_device omap7xx_mpu_gpio = {
+static struct platform_device omap7xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio1 = {
+static struct platform_device omap7xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio2 = {
+static struct platform_device omap7xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio3 = {
+static struct platform_device omap7xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio4 = {
+static struct platform_device omap7xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {
@@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio5 = {
+static struct platform_device omap7xx_gpio5 = {
 	.name           = "omap_gpio",
 	.id             = 5,
 	.dev            = {
@@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio6 = {
+static struct platform_device omap7xx_gpio6 = {
 	.name           = "omap_gpio",
 	.id             = 6,
 	.dev            = {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -558,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module =
 	.subdev_board_info = &rx51_si4713_board_info,
 };
 
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
+static struct platform_device rx51_si4713_dev = {
 	.name	= "radio-si4713",
 	.id	= -1,
 	.dev	= {

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void)
 		if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
 		    (GPDR(i) & GPIO_bit(i))) {
 			if (GPLR(i) & GPIO_bit(i))
-				PGSR(i) |= GPIO_bit(i);
+				PGSR(gpio_to_bank(i)) |= GPIO_bit(i);
 			else
-				PGSR(i) &= ~GPIO_bit(i);
+				PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i);
 		}
 	}
 

arch/arm/mach-pxa/raumfeld.c

@@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
 	.xres		= 480,
 	.yres		= 272,
 	.bpp		= 16,
-	.hsync_len	= 4,
+	.hsync_len	= 41,
 	.left_margin	= 2,
 	.right_margin	= 1,
-	.vsync_len	= 1,
+	.vsync_len	= 10,
 	.upper_margin	= 3,
 	.lower_margin	= 1,
 	.sync		= 0,
@@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void)
 {
 	int ret;
 
-	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-
-	/* Earlier devices had the backlight regulator controlled
-	 * via PWM, later versions use another controller for that */
-	if ((system_rev & 0xff) < 2) {
-		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
-		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
-		platform_device_register(&raumfeld_pwm_backlight_device);
-	} else
-		platform_device_register(&raumfeld_lt3593_device);
-
 	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
 	else
 		gpio_direction_output(GPIO_TFT_VA_EN, 1);
 
+	msleep(100);
+
 	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
 	else
 		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
 
+	/* Hardware revision 2 has the backlight regulator controlled
+	 * by an LT3593, earlier and later devices use PWM for that. */
+	if ((system_rev & 0xff) == 2) {
+		platform_device_register(&raumfeld_lt3593_device);
+	} else {
+		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		platform_device_register(&raumfeld_pwm_backlight_device);
+	}
+
+	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
 	platform_device_register(&pxa3xx_device_gcu);
 }
 
@@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = {
 
 #define SPI_AK4104	\
 {			\
-	.modalias	= "ak4104",	\
-	.max_speed_hz	= 10000,	\
-	.bus_num	= 0,		\
-	.chip_select	= 0,		\
+	.modalias	= "ak4104-codec",	\
+	.max_speed_hz	= 10000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 0,			\
 	.controller_data = (void *) GPIO_SPDIF_CS,	\
 }
 

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -552,7 +552,7 @@ struct mini2440_features_t {
 	struct platform_device *optional[8];
 };
 
-static void mini2440_parse_features(
+static void __init mini2440_parse_features(
 		struct mini2440_features_t * features,
 		const char * features_str )
 {

arch/arm/mach-s3c64xx/dev-spi.c

@@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 struct platform_device s3c64xx_device_spi1 = {

arch/arm/mach-s5p64x0/dev-spi.c

@@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
 	.cfg_gpio	= s5p6440_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x1ff,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
 	.cfg_gpio	= s5p6450_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x1ff,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
 	.cfg_gpio	= s5p6440_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x7f,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
 	.cfg_gpio	= s5p6450_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x7f,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 struct platform_device s5p64x0_device_spi1 = {

arch/arm/mach-s5pc100/dev-spi.c

@@ -15,6 +15,7 @@
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
@@ -90,6 +91,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -134,6 +136,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 struct platform_device s5pc100_device_spi1 = {
@@ -176,6 +179,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 struct platform_device s5pc100_device_spi2 = {

arch/arm/mach-s5pv210/dev-spi.c

@@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
 	.fifo_lvl_mask = 0x1ff,
 	.rx_lvl_offset = 15,
 	.high_speed = 1,
+	.tx_st_done = 25,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 15,
 	.high_speed = 1,
+	.tx_st_done = 25,
 };
 
 struct platform_device s5pv210_device_spi1 = {

arch/arm/mach-vt8500/irq.c

@@ -39,9 +39,10 @@
 static void __iomem *ic_regbase;
 static void __iomem *sic_regbase;
 
-static void vt8500_irq_mask(unsigned int irq)
+static void vt8500_irq_mask(struct irq_data *d)
 {
 	void __iomem *base = ic_regbase;
+	unsigned irq = d->irq;
 	u8 edge;
 
 	if (irq >= 64) {
@@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq)
 	}
 }
 
-static void vt8500_irq_unmask(unsigned int irq)
+static void vt8500_irq_unmask(struct irq_data *d)
 {
 	void __iomem *base = ic_regbase;
+	unsigned irq = d->irq;
 	u8 dctr;
 
 	if (irq >= 64) {
@@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq)
 	writeb(dctr, base + VT8500_IC_DCTR + irq);
 }
 
-static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
 	void __iomem *base = ic_regbase;
-	unsigned int orig_irq = irq;
+	unsigned irq = d->irq;
+	unsigned orig_irq = irq;
 	u8 dctr;
 
 	if (irq >= 64) {
@@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
 }
 
 static struct irq_chip vt8500_irq_chip = {
-	.name      = "vt8500",
-	.ack       = vt8500_irq_mask,
-	.mask      = vt8500_irq_mask,
-	.unmask    = vt8500_irq_unmask,
-	.set_type  = vt8500_irq_set_type,
+	.name = "vt8500",
+	.irq_ack = vt8500_irq_mask,
+	.irq_mask = vt8500_irq_mask,
+	.irq_unmask = vt8500_irq_unmask,
+	.irq_set_type = vt8500_irq_set_type,
 };
 
 void __init vt8500_init_irq(void)

arch/arm/mm/cache-l2x0.c

@@ -120,17 +120,22 @@ static void l2x0_cache_sync(void)
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
-static void l2x0_flush_all(void)
+static void __l2x0_flush_all(void)
 {
-	unsigned long flags;
-
-	/* clean all ways */
-	spin_lock_irqsave(&l2x0_lock, flags);
 	debug_writel(0x03);
 	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
 	cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	debug_writel(0x00);
+}
+
+static void l2x0_flush_all(void)
+{
+	unsigned long flags;
+
+	/* clean all ways */
+	spin_lock_irqsave(&l2x0_lock, flags);
+	__l2x0_flush_all();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
@@ -266,7 +271,9 @@ static void l2x0_disable(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(0, l2x0_base + L2X0_CTRL);
+	__l2x0_flush_all();
+	writel_relaxed(0, l2x0_base + L2X0_CTRL);
+	dsb();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 

arch/arm/mm/mmu.c

@@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc);
 
 static phys_addr_t lowmem_limit __initdata = 0;
 
-static void __init sanity_check_meminfo(void)
+void __init sanity_check_meminfo(void)
 {
 	int i, j, highmem = 0;
 
@@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
+	memblock_set_current_limit(lowmem_limit);
+
 	build_mem_type_table();
-	sanity_check_meminfo();
 	prepare_page_table();
 	map_lowmem();
 	devicemaps_init(mdesc);

arch/arm/mm/nommu.c

@@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void)
 	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
 }
 
+void __init sanity_check_meminfo(void)
+{
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.

arch/arm/plat-orion/gpio.c

@@ -432,7 +432,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 	ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF;
 	ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
 	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_clr_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 	ct->chip.irq_set_type = gpio_irq_set_type;

arch/arm/plat-pxa/gpio.c

@@ -50,7 +50,7 @@ static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
 	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
 }
 
-static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
 {
 	return &pxa_gpio_chips[gpio_to_bank(gpio)];
 }
@@ -161,7 +161,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
 	int gpio = irq_to_gpio(d->irq);
 	unsigned long gpdr, mask = GPIO_bit(gpio);
 
-	c = gpio_to_chip(gpio);
+	c = gpio_to_pxachip(gpio);
 
 	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
@@ -230,7 +230,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
 static void pxa_ack_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 
 	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
 }
@@ -238,7 +238,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d)
 static void pxa_mask_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 	uint32_t grer, gfer;
 
 	c->irq_mask &= ~GPIO_bit(gpio);
@@ -252,7 +252,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d)
 static void pxa_unmask_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 
 	c->irq_mask |= GPIO_bit(gpio);
 	update_edge_detect(c);

arch/arm/plat-s3c24xx/dma.c

@@ -1027,17 +1027,13 @@ int s3c2410_dma_config(unsigned int channel,
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned int dcon;
 
-	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
-		 __func__, channel, xferunit, dcon);
+	pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit);
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
-
 	dcon = chan->dcon & dma_sel.dcon_mask;
-
-	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
+	pr_debug("%s: dcon is %08x\n", __func__, dcon);
 
 	switch (chan->req_ch) {
 	case DMACH_I2S_IN:
@@ -1235,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 	/* restore channel's hardware configuration */
 
 	if (!cp->in_use)
-		return 0;
+		return;
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
@@ -1246,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 
 	if (cp->map != NULL)
 		dma_sel.select(cp, cp->map);
-
-	return 0;
 }
 
 static void s3c2410_dma_resume(void)

arch/arm/plat-s5p/irq-gpioint.c

@@ -152,7 +152,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 	if (!gc)
 		return -ENOMEM;
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 	ct->chip.irq_set_type = s5p_gpioint_set_type,

arch/arm/plat-s5p/s5p-time.c

@@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void)
 
 	clock_rate = clk_get_rate(tin_source);
 
-	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
-
 	s5p_time_setup(timer_source.source_id, TCNT_MAX);
 	s5p_time_start(timer_source.source_id, PERIODIC);
 
+	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+
 	if (clocksource_register_hz(&time_clocksource, clock_rate))
 		panic("%s: can't register clocksource\n", time_clocksource.name);
 }

arch/arm/plat-samsung/include/plat/devs.h

@@ -12,6 +12,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __PLAT_DEVS_H
+#define __PLAT_DEVS_H __FILE__
+
 #include <linux/platform_device.h>
 
 struct s3c24xx_uart_resources {
@@ -159,3 +163,5 @@ extern struct platform_device s3c_device_ac97;
  */
 extern void *s3c_set_platdata(void *pd, size_t pdsize,
 			      struct platform_device *pdev);
+
+#endif /* __PLAT_DEVS_H */

arch/arm/plat-samsung/include/plat/s3c64xx-spi.h

@@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo {
  * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
  * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
  * @high_speed: If the controller supports HIGH_SPEED_EN bit
+ * @tx_st_done: Depends on tx fifo_lvl field
  */
 struct s3c64xx_spi_info {
 	int src_clk_nr;
@@ -53,6 +54,7 @@ struct s3c64xx_spi_info {
 	int fifo_lvl_mask;
 	int rx_lvl_offset;
 	int high_speed;
+	int tx_st_done;
 };
 
 /**

arch/arm/plat-samsung/irq-uart.c

@@ -55,7 +55,7 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
 	gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base,
 				    handle_level_irq);
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 	ct->regs.ack = S3C64XX_UINTP;

arch/powerpc/platforms/pseries/hotplug-memory.c

@@ -12,6 +12,8 @@
 #include <linux/of.h>
 #include <linux/memblock.h>
 #include <linux/vmalloc.h>
+#include <linux/memory.h>
+
 #include <asm/firmware.h>
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
@@ -20,24 +22,25 @@
 static unsigned long get_memblock_size(void)
 {
 	struct device_node *np;
-	unsigned int memblock_size = 0;
+	unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE;
+	struct resource r;
 
 	np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
 	if (np) {
-		const unsigned long *size;
+		const __be64 *size;
 
 		size = of_get_property(np, "ibm,lmb-size", NULL);
-		memblock_size = size ? *size : 0;
-
+		if (size)
+			memblock_size = be64_to_cpup(size);
 		of_node_put(np);
-	} else {
+	} else  if (machine_is(pseries)) {
+		/* This fallback really only applies to pseries */
 		unsigned int memzero_size = 0;
-		const unsigned int *regs;
 
 		np = of_find_node_by_path("/memory@0");
 		if (np) {
-			regs = of_get_property(np, "reg", NULL);
-			memzero_size = regs ? regs[3] : 0;
+			if (!of_address_to_resource(np, 0, &r))
+				memzero_size = resource_size(&r);
 			of_node_put(np);
 		}
 
@@ -50,16 +53,21 @@ static unsigned long get_memblock_size(void)
 			sprintf(buf, "/memory@%x", memzero_size);
 			np = of_find_node_by_path(buf);
 			if (np) {
-				regs = of_get_property(np, "reg", NULL);
-				memblock_size = regs ? regs[3] : 0;
+				if (!of_address_to_resource(np, 0, &r))
+					memblock_size = resource_size(&r);
 				of_node_put(np);
 			}
 		}
 	}
-
 	return memblock_size;
 }
 
+/* WARNING: This is going to override the generic definition whenever
+ * pseries is built-in regardless of what platform is active at boot
+ * time. This is fine for now as this is the only "option" and it
+ * should work everywhere. If not, we'll have to turn this into a
+ * ppc_md. callback
+ */
 unsigned long memory_block_size_bytes(void)
 {
 	return get_memblock_size();

arch/x86/include/asm/mmzone_32.h

@@ -57,6 +57,8 @@ static inline int pfn_valid(int pfn)
 	return 0;
 }
 
+#define early_pfn_valid(pfn)	pfn_valid((pfn))
+
 #endif /* CONFIG_DISCONTIGMEM */
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES

arch/x86/kernel/acpi/realmode/wakeup.S

@@ -28,6 +28,8 @@ pmode_cr3:	.long	0	/* Saved %cr3 */
 pmode_cr4:	.long	0	/* Saved %cr4 */
 pmode_efer:	.quad	0	/* Saved EFER */
 pmode_gdt:	.quad	0
+pmode_misc_en:	.quad	0	/* Saved MISC_ENABLE MSR */
+pmode_behavior:	.long	0	/* Wakeup behavior flags */
 realmode_flags:	.long	0
 real_magic:	.long	0
 trampoline_segment:	.word 0
@@ -91,6 +93,18 @@ wakeup_code:
 	/* Call the C code */
 	calll	main
 
+	/* Restore MISC_ENABLE before entering protected mode, in case
+	   BIOS decided to clear XD_DISABLE during S3. */
+	movl	pmode_behavior, %eax
+	btl	$WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax
+	jnc	1f
+
+	movl	pmode_misc_en, %eax
+	movl	pmode_misc_en + 4, %edx
+	movl	$MSR_IA32_MISC_ENABLE, %ecx
+	wrmsr
+1:
+
 	/* Do any other stuff... */
 
 #ifndef CONFIG_64BIT

arch/x86/kernel/acpi/realmode/wakeup.h

@@ -21,6 +21,9 @@ struct wakeup_header {
 	u32 pmode_efer_low;	/* Protected mode EFER */
 	u32 pmode_efer_high;
 	u64 pmode_gdt;
+	u32 pmode_misc_en_low;	/* Protected mode MISC_ENABLE */
+	u32 pmode_misc_en_high;
+	u32 pmode_behavior;	/* Wakeup routine behavior flags */
 	u32 realmode_flags;
 	u32 real_magic;
 	u16 trampoline_segment;	/* segment with trampoline code, 64-bit only */
@@ -39,4 +42,7 @@ extern struct wakeup_header wakeup_header;
 #define WAKEUP_HEADER_SIGNATURE 0x51ee1111
 #define WAKEUP_END_SIGNATURE	0x65a22c82
 
+/* Wakeup behavior bits */
+#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE     0
+
 #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */

arch/x86/kernel/acpi/sleep.c

@@ -77,6 +77,12 @@ int acpi_suspend_lowlevel(void)
 
 	header->pmode_cr0 = read_cr0();
 	header->pmode_cr4 = read_cr4_safe();
+	header->pmode_behavior = 0;
+	if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
+			&header->pmode_misc_en_low,
+			&header->pmode_misc_en_high))
+		header->pmode_behavior |=
+			(1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE);
 	header->realmode_flags = acpi_realmode_flags;
 	header->real_magic = 0x12345678;
 

arch/x86/kernel/reboot.c

@@ -294,6 +294,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
 		},
 	},
+	{ /* Handle reboot issue on Acer Aspire one */
+		.callback = set_bios_reboot,
+		.ident = "Acer Aspire One A110",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
+		},
+	},
 	{ }
 };
 

arch/x86/mm/init_64.c

@@ -28,6 +28,7 @@
 #include <linux/poison.h>
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
+#include <linux/memory.h>
 #include <linux/memory_hotplug.h>
 #include <linux/nmi.h>
 #include <linux/gfp.h>
@@ -895,8 +896,6 @@ const char *arch_vma_name(struct vm_area_struct *vma)
 }
 
 #ifdef CONFIG_X86_UV
-#define MIN_MEMORY_BLOCK_SIZE   (1 << SECTION_SIZE_BITS)
-
 unsigned long memory_block_size_bytes(void)
 {
 	if (is_uv_system()) {

arch/x86/oprofile/nmi_int.c

@@ -112,8 +112,10 @@ static void nmi_cpu_start(void *dummy)
 static int nmi_start(void)
 {
 	get_online_cpus();
-	on_each_cpu(nmi_cpu_start, NULL, 1);
 	ctr_running = 1;
+	/* make ctr_running visible to the nmi handler: */
+	smp_mb();
+	on_each_cpu(nmi_cpu_start, NULL, 1);
 	put_online_cpus();
 	return 0;
 }
@@ -504,15 +506,18 @@ static int nmi_setup(void)
 
 	nmi_enabled = 0;
 	ctr_running = 0;
-	barrier();
+	/* make variables visible to the nmi handler: */
+	smp_mb();
 	err = register_die_notifier(&profile_exceptions_nb);
 	if (err)
 		goto fail;
 
 	get_online_cpus();
 	register_cpu_notifier(&oprofile_cpu_nb);
-	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
+	/* make nmi_enabled visible to the nmi handler: */
+	smp_mb();
+	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	put_online_cpus();
 
 	return 0;
@@ -531,7 +536,8 @@ static void nmi_shutdown(void)
 	nmi_enabled = 0;
 	ctr_running = 0;
 	put_online_cpus();
-	barrier();
+	/* make variables visible to the nmi handler: */
+	smp_mb();
 	unregister_die_notifier(&profile_exceptions_nb);
 	msrs = &get_cpu_var(cpu_msrs);
 	model->shutdown(msrs);

arch/x86/pci/xen.c

@@ -327,7 +327,7 @@ int __init pci_xen_hvm_init(void)
 }
 
 #ifdef CONFIG_XEN_DOM0
-static int xen_register_pirq(u32 gsi, int triggering)
+static int xen_register_pirq(u32 gsi, int gsi_override, int triggering)
 {
 	int rc, pirq, irq = -1;
 	struct physdev_map_pirq map_irq;
@@ -344,16 +344,18 @@ static int xen_register_pirq(u32 gsi, int triggering)
 		shareable = 1;
 		name = "ioapic-level";
 	}
-
 	pirq = xen_allocate_pirq_gsi(gsi);
 	if (pirq < 0)
 		goto out;
 
-	irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
+	if (gsi_override >= 0)
+		irq = xen_bind_pirq_gsi_to_irq(gsi_override, pirq, shareable, name);
+	else
+		irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
 	if (irq < 0)
 		goto out;
 
-	printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, irq);
+	printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", pirq, irq, gsi);
 
 	map_irq.domid = DOMID_SELF;
 	map_irq.type = MAP_PIRQ_TYPE_GSI;
@@ -370,7 +372,7 @@ out:
 	return irq;
 }
 
-static int xen_register_gsi(u32 gsi, int triggering, int polarity)
+static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
 {
 	int rc, irq;
 	struct physdev_setup_gsi setup_gsi;
@@ -381,7 +383,7 @@ static int xen_register_gsi(u32 gsi, int triggering, int polarity)
 	printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
 			gsi, triggering, polarity);
 
-	irq = xen_register_pirq(gsi, triggering);
+	irq = xen_register_pirq(gsi, gsi_override, triggering);
 
 	setup_gsi.gsi = gsi;
 	setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
@@ -403,6 +405,8 @@ static __init void xen_setup_acpi_sci(void)
 	int rc;
 	int trigger, polarity;
 	int gsi = acpi_sci_override_gsi;
+	int irq = -1;
+	int gsi_override = -1;
 
 	if (!gsi)
 		return;
@@ -419,7 +423,25 @@ static __init void xen_setup_acpi_sci(void)
 	printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
 			"polarity=%d\n", gsi, trigger, polarity);
 
-	gsi = xen_register_gsi(gsi, trigger, polarity);
+	/* Before we bind the GSI to a Linux IRQ, check whether
+	 * we need to override it with bus_irq (IRQ) value. Usually for
+	 * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
+	 *  ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
+	 * but there are oddballs where the IRQ != GSI:
+	 *  ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
+	 * which ends up being: gsi_to_irq[9] == 20
+	 * (which is what acpi_gsi_to_irq ends up calling when starting the
+	 * the ACPI interpreter and keels over since IRQ 9 has not been
+	 * setup as we had setup IRQ 20 for it).
+	 */
+	/* Check whether the GSI != IRQ */
+	if (acpi_gsi_to_irq(gsi, &irq) == 0) {
+		if (irq >= 0 && irq != gsi)
+			/* Bugger, we MUST have that IRQ. */
+			gsi_override = irq;
+	}
+
+	gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity);
 	printk(KERN_INFO "xen: acpi sci %d\n", gsi);
 
 	return;
@@ -428,7 +450,7 @@ static __init void xen_setup_acpi_sci(void)
 static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
 				 int trigger, int polarity)
 {
-	return xen_register_gsi(gsi, trigger, polarity);
+	return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
 }
 
 static int __init pci_xen_initial_domain(void)
@@ -467,7 +489,7 @@ void __init xen_setup_pirqs(void)
 		if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
 			continue;
 
-		xen_register_pirq(irq,
+		xen_register_pirq(irq, -1 /* no GSI override */,
 			trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE);
 	}
 }

arch/x86/platform/efi/efi.c

@@ -504,9 +504,6 @@ void __init efi_init(void)
 	x86_platform.set_wallclock = efi_set_rtc_mmss;
 #endif
 
-	/* Setup for EFI runtime service */
-	reboot_type = BOOT_EFI;
-
 #if EFI_DEBUG
 	print_efi_memmap();
 #endif

arch/x86/xen/mmu.c

@@ -1232,7 +1232,11 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,
 {
 	struct {
 		struct mmuext_op op;
+#ifdef CONFIG_SMP
 		DECLARE_BITMAP(mask, num_processors);
+#else
+		DECLARE_BITMAP(mask, NR_CPUS);
+#endif
 	} *args;
 	struct multicall_space mcs;
 

block/cfq-iosched.c

@@ -2773,11 +2773,14 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
 	smp_wmb();
 	cic->key = cfqd_dead_key(cfqd);
 
+	rcu_read_lock();
 	if (rcu_dereference(ioc->ioc_data) == cic) {
+		rcu_read_unlock();
 		spin_lock(&ioc->lock);
 		rcu_assign_pointer(ioc->ioc_data, NULL);
 		spin_unlock(&ioc->lock);
-	}
+	} else
+		rcu_read_unlock();
 
 	if (cic->cfqq[BLK_RW_ASYNC]) {
 		cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);
@@ -3084,7 +3087,8 @@ cfq_drop_dead_cic(struct cfq_data *cfqd, struct io_context *ioc,
 
 	spin_lock_irqsave(&ioc->lock, flags);
 
-	BUG_ON(ioc->ioc_data == cic);
+	BUG_ON(rcu_dereference_check(ioc->ioc_data,
+		lockdep_is_held(&ioc->lock)) == cic);
 
 	radix_tree_delete(&ioc->radix_root, cfqd->cic_index);
 	hlist_del_rcu(&cic->cic_list);

drivers/base/memory.c

@@ -30,7 +30,6 @@
 static DEFINE_MUTEX(mem_sysfs_mutex);
 
 #define MEMORY_CLASS_NAME	"memory"
-#define MIN_MEMORY_BLOCK_SIZE	(1 << SECTION_SIZE_BITS)
 
 static int sections_per_block;
 

drivers/base/syscore.c

@@ -9,6 +9,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
+#include <linux/interrupt.h>
 
 static LIST_HEAD(syscore_ops_list);
 static DEFINE_MUTEX(syscore_ops_lock);
@@ -48,6 +49,13 @@ int syscore_suspend(void)
 	struct syscore_ops *ops;
 	int ret = 0;
 
+	pr_debug("Checking wakeup interrupts\n");
+
+	/* Return error code if there are any wakeup interrupts pending. */
+	ret = check_wakeup_irqs();
+	if (ret)
+		return ret;
+
 	WARN_ONCE(!irqs_disabled(),
 		"Interrupts enabled before system core suspend.\n");
 

drivers/block/drbd/drbd_actlog.c

@@ -79,7 +79,7 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
 	md_io.error = 0;
 
 	if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags))
-		rw |= REQ_FUA;
+		rw |= REQ_FUA | REQ_FLUSH;
 	rw |= REQ_SYNC;
 
 	bio = bio_alloc(GFP_NOIO, 1);

drivers/block/drbd/drbd_bitmap.c

@@ -112,9 +112,6 @@ struct drbd_bitmap {
 	struct task_struct *bm_task;
 };
 
-static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
-			       unsigned long e, int val, const enum km_type km);
-
 #define bm_print_lock_info(m) __bm_print_lock_info(m, __func__)
 static void __bm_print_lock_info(struct drbd_conf *mdev, const char *func)
 {
@@ -994,6 +991,9 @@ static void bm_page_io_async(struct bm_aio_ctx *ctx, int page_nr, int rw) __must
 		bio_endio(bio, -EIO);
 	} else {
 		submit_bio(rw, bio);
+		/* this should not count as user activity and cause the
+		 * resync to throttle -- see drbd_rs_should_slow_down(). */
+		atomic_add(len >> 9, &mdev->rs_sect_ev);
 	}
 }
 
@@ -1256,7 +1256,7 @@ unsigned long _drbd_bm_find_next_zero(struct drbd_conf *mdev, unsigned long bm_f
  * expected to be called for only a few bits (e - s about BITS_PER_LONG).
  * Must hold bitmap lock already. */
 static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
-	unsigned long e, int val, const enum km_type km)
+	unsigned long e, int val)
 {
 	struct drbd_bitmap *b = mdev->bitmap;
 	unsigned long *p_addr = NULL;
@@ -1274,14 +1274,14 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
 		unsigned int page_nr = bm_bit_to_page_idx(b, bitnr);
 		if (page_nr != last_page_nr) {
 			if (p_addr)
-				__bm_unmap(p_addr, km);
+				__bm_unmap(p_addr, KM_IRQ1);
 			if (c < 0)
 				bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]);
 			else if (c > 0)
 				bm_set_page_need_writeout(b->bm_pages[last_page_nr]);
 			changed_total += c;
 			c = 0;
-			p_addr = __bm_map_pidx(b, page_nr, km);
+			p_addr = __bm_map_pidx(b, page_nr, KM_IRQ1);
 			last_page_nr = page_nr;
 		}
 		if (val)
@@ -1290,7 +1290,7 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
 			c -= (0 != __test_and_clear_bit_le(bitnr & BITS_PER_PAGE_MASK, p_addr));
 	}
 	if (p_addr)
-		__bm_unmap(p_addr, km);
+		__bm_unmap(p_addr, KM_IRQ1);
 	if (c < 0)
 		bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]);
 	else if (c > 0)
@@ -1318,7 +1318,7 @@ static int bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
 	if ((val ? BM_DONT_SET : BM_DONT_CLEAR) & b->bm_flags)
 		bm_print_lock_info(mdev);
 
-	c = __bm_change_bits_to(mdev, s, e, val, KM_IRQ1);
+	c = __bm_change_bits_to(mdev, s, e, val);
 
 	spin_unlock_irqrestore(&b->bm_lock, flags);
 	return c;
@@ -1343,16 +1343,17 @@ static inline void bm_set_full_words_within_one_page(struct drbd_bitmap *b,
 {
 	int i;
 	int bits;
-	unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_USER0);
+	unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_IRQ1);
 	for (i = first_word; i < last_word; i++) {
 		bits = hweight_long(paddr[i]);
 		paddr[i] = ~0UL;
 		b->bm_set += BITS_PER_LONG - bits;
 	}
-	kunmap_atomic(paddr, KM_USER0);
+	kunmap_atomic(paddr, KM_IRQ1);
 }
 
-/* Same thing as drbd_bm_set_bits, but without taking the spin_lock_irqsave.
+/* Same thing as drbd_bm_set_bits,
+ * but more efficient for a large bit range.
  * You must first drbd_bm_lock().
  * Can be called to set the whole bitmap in one go.
  * Sets bits from s to e _inclusive_. */
@@ -1366,6 +1367,7 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi
 	 * Do not use memset, because we must account for changes,
 	 * so we need to loop over the words with hweight() anyways.
 	 */
+	struct drbd_bitmap *b = mdev->bitmap;
 	unsigned long sl = ALIGN(s,BITS_PER_LONG);
 	unsigned long el = (e+1) & ~((unsigned long)BITS_PER_LONG-1);
 	int first_page;
@@ -1376,15 +1378,19 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi
 
 	if (e - s <= 3*BITS_PER_LONG) {
 		/* don't bother; el and sl may even be wrong. */
-		__bm_change_bits_to(mdev, s, e, 1, KM_USER0);
+		spin_lock_irq(&b->bm_lock);
+		__bm_change_bits_to(mdev, s, e, 1);
+		spin_unlock_irq(&b->bm_lock);
 		return;
 	}
 
 	/* difference is large enough that we can trust sl and el */
 
+	spin_lock_irq(&b->bm_lock);
+
 	/* bits filling the current long */
 	if (sl)
-		__bm_change_bits_to(mdev, s, sl-1, 1, KM_USER0);
+		__bm_change_bits_to(mdev, s, sl-1, 1);
 
 	first_page = sl >> (3 + PAGE_SHIFT);
 	last_page = el >> (3 + PAGE_SHIFT);
@@ -1397,8 +1403,10 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi
 	/* first and full pages, unless first page == last page */
 	for (page_nr = first_page; page_nr < last_page; page_nr++) {
 		bm_set_full_words_within_one_page(mdev->bitmap, page_nr, first_word, last_word);
+		spin_unlock_irq(&b->bm_lock);
 		cond_resched();
 		first_word = 0;
+		spin_lock_irq(&b->bm_lock);
 	}
 
 	/* last page (respectively only page, for first page == last page) */
@@ -1411,7 +1419,8 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi
 	 * it would trigger an assert in __bm_change_bits_to()
 	 */
 	if (el <= e)
-		__bm_change_bits_to(mdev, el, e, 1, KM_USER0);
+		__bm_change_bits_to(mdev, el, e, 1);
+	spin_unlock_irq(&b->bm_lock);
 }
 
 /* returns bit state

drivers/block/drbd/drbd_receiver.c

@@ -4602,6 +4602,11 @@ int drbd_asender(struct drbd_thread *thi)
 			dev_err(DEV, "meta connection shut down by peer.\n");
 			goto reconnect;
 		} else if (rv == -EAGAIN) {
+			/* If the data socket received something meanwhile,
+			 * that is good enough: peer is still alive. */
+			if (time_after(mdev->last_received,
+				jiffies - mdev->meta.socket->sk->sk_rcvtimeo))
+				continue;
 			if (ping_timeout_active) {
 				dev_err(DEV, "PingAck did not arrive in time.\n");
 				goto reconnect;
@@ -4637,6 +4642,7 @@ int drbd_asender(struct drbd_thread *thi)
 				goto reconnect;
 		}
 		if (received == expect) {
+			mdev->last_received = jiffies;
 			D_ASSERT(cmd != NULL);
 			if (!cmd->process(mdev, h))
 				goto reconnect;

drivers/block/drbd/drbd_worker.c

@@ -536,12 +536,7 @@ static int w_make_resync_request(struct drbd_conf *mdev,
 		return 1;
 	}
 
-	/* starting with drbd 8.3.8, we can handle multi-bio EEs,
-	 * if it should be necessary */
-	max_bio_size =
-		mdev->agreed_pro_version < 94 ? queue_max_hw_sectors(mdev->rq_queue) << 9 :
-		mdev->agreed_pro_version < 95 ?	DRBD_MAX_SIZE_H80_PACKET : DRBD_MAX_BIO_SIZE;
-
+	max_bio_size = queue_max_hw_sectors(mdev->rq_queue) << 9;
 	number = drbd_rs_number_requests(mdev);
 	if (number == 0)
 		goto requeue;

drivers/char/agp/intel-agp.h

@@ -90,9 +90,10 @@
 #define G4x_GMCH_SIZE_MASK	(0xf << 8)
 #define G4x_GMCH_SIZE_1M	(0x1 << 8)
 #define G4x_GMCH_SIZE_2M	(0x3 << 8)
-#define G4x_GMCH_SIZE_VT_1M	(0x9 << 8)
-#define G4x_GMCH_SIZE_VT_1_5M	(0xa << 8)
-#define G4x_GMCH_SIZE_VT_2M	(0xc << 8)
+#define G4x_GMCH_SIZE_VT_EN	(0x8 << 8)
+#define G4x_GMCH_SIZE_VT_1M	(G4x_GMCH_SIZE_1M | G4x_GMCH_SIZE_VT_EN)
+#define G4x_GMCH_SIZE_VT_1_5M	((0x2 << 8) | G4x_GMCH_SIZE_VT_EN)
+#define G4x_GMCH_SIZE_VT_2M	(G4x_GMCH_SIZE_2M | G4x_GMCH_SIZE_VT_EN)
 
 #define GFX_FLSH_CNTL		0x2170 /* 915+ */
 

drivers/cpufreq/acpi-cpufreq.c

@@ -759,7 +759,7 @@ static void __exit acpi_cpufreq_exit(void)
 
 	cpufreq_unregister_driver(&acpi_cpufreq_driver);
 
-	free_percpu(acpi_perf_data);
+	free_acpi_perf_data();
 }
 
 module_param(acpi_pstate_strict, uint, 0644);

drivers/firewire/ohci.c

@@ -264,6 +264,7 @@ static char ohci_driver_name[] = KBUILD_MODNAME;
 #define PCI_DEVICE_ID_AGERE_FW643	0x5901
 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW	0x2380
 #define PCI_DEVICE_ID_TI_TSB12LV22	0x8009
+#define PCI_VENDOR_ID_PINNACLE_SYSTEMS	0x11bd
 
 #define QUIRK_CYCLE_TIMER		1
 #define QUIRK_RESET_PACKET		2
@@ -3190,6 +3191,11 @@ static int __devinit pci_probe(struct pci_dev *dev,
 	int i, err;
 	size_t size;
 
+	if (dev->vendor == PCI_VENDOR_ID_PINNACLE_SYSTEMS) {
+		dev_err(&dev->dev, "Pinnacle MovieBoard is not yet supported\n");
+		return -ENOSYS;
+	}
+
 	ohci = kzalloc(sizeof(*ohci), GFP_KERNEL);
 	if (ohci == NULL) {
 		err = -ENOMEM;

drivers/gpio/langwell_gpio.c

@@ -223,7 +223,7 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
 		gedr = gpio_reg(&lnw->chip, base, GEDR);
 		pending = readl(gedr);
 		while (pending) {
-			gpio = __ffs(pending) - 1;
+			gpio = __ffs(pending);
 			mask = BIT(gpio);
 			pending &= ~mask;
 			/* Clear before handling so we can't lose an edge */

drivers/gpio/tps65910-gpio.c

@@ -81,8 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base)
 	switch(tps65910_chip_id(tps65910)) {
 	case TPS65910:
 		tps65910->gpio.ngpio	= 6;
+		break;
 	case TPS65911:
 		tps65910->gpio.ngpio	= 9;
+		break;
 	default:
 		return;
 	}

drivers/gpu/drm/drm_crtc.c

@@ -886,9 +886,6 @@ int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group)
 	total_objects += dev->mode_config.num_connector;
 	total_objects += dev->mode_config.num_encoder;
 
-	if (total_objects == 0)
-		return -EINVAL;
-
 	group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL);
 	if (!group->id_list)
 		return -ENOMEM;

drivers/gpu/drm/i915/i915_debugfs.c

@@ -1207,13 +1207,17 @@ static int i915_context_status(struct seq_file *m, void *unused)
 	if (ret)
 		return ret;
 
-	seq_printf(m, "power context ");
-	describe_obj(m, dev_priv->pwrctx);
-	seq_printf(m, "\n");
+	if (dev_priv->pwrctx) {
+		seq_printf(m, "power context ");
+		describe_obj(m, dev_priv->pwrctx);
+		seq_printf(m, "\n");
+	}
 
-	seq_printf(m, "render context ");
-	describe_obj(m, dev_priv->renderctx);
-	seq_printf(m, "\n");
+	if (dev_priv->renderctx) {
+		seq_printf(m, "render context ");
+		describe_obj(m, dev_priv->renderctx);
+		seq_printf(m, "\n");
+	}
 
 	mutex_unlock(&dev->mode_config.mutex);
 

drivers/gpu/drm/i915/i915_dma.c

@@ -1266,30 +1266,6 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	intel_modeset_gem_init(dev);
 
-	if (IS_IVYBRIDGE(dev)) {
-		/* Share pre & uninstall handlers with ILK/SNB */
-		dev->driver->irq_handler = ivybridge_irq_handler;
-		dev->driver->irq_preinstall = ironlake_irq_preinstall;
-		dev->driver->irq_postinstall = ivybridge_irq_postinstall;
-		dev->driver->irq_uninstall = ironlake_irq_uninstall;
-		dev->driver->enable_vblank = ivybridge_enable_vblank;
-		dev->driver->disable_vblank = ivybridge_disable_vblank;
-	} else if (HAS_PCH_SPLIT(dev)) {
-		dev->driver->irq_handler = ironlake_irq_handler;
-		dev->driver->irq_preinstall = ironlake_irq_preinstall;
-		dev->driver->irq_postinstall = ironlake_irq_postinstall;
-		dev->driver->irq_uninstall = ironlake_irq_uninstall;
-		dev->driver->enable_vblank = ironlake_enable_vblank;
-		dev->driver->disable_vblank = ironlake_disable_vblank;
-	} else {
-		dev->driver->irq_preinstall = i915_driver_irq_preinstall;
-		dev->driver->irq_postinstall = i915_driver_irq_postinstall;
-		dev->driver->irq_uninstall = i915_driver_irq_uninstall;
-		dev->driver->irq_handler = i915_driver_irq_handler;
-		dev->driver->enable_vblank = i915_enable_vblank;
-		dev->driver->disable_vblank = i915_disable_vblank;
-	}
-
 	ret = drm_irq_install(dev);
 	if (ret)
 		goto cleanup_gem;
@@ -1967,7 +1943,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	if (!dev_priv->mm.gtt) {
 		DRM_ERROR("Failed to initialize GTT\n");
 		ret = -ENODEV;
-		goto out_iomapfree;
+		goto out_rmmap;
 	}
 
 	agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
@@ -2011,18 +1987,13 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	if (dev_priv->wq == NULL) {
 		DRM_ERROR("Failed to create our workqueue.\n");
 		ret = -ENOMEM;
-		goto out_iomapfree;
+		goto out_mtrrfree;
 	}
 
 	/* enable GEM by default */
 	dev_priv->has_gem = 1;
 
-	dev->driver->get_vblank_counter = i915_get_vblank_counter;
-	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
-	if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
-		dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
-		dev->driver->get_vblank_counter = gm45_get_vblank_counter;
-	}
+	intel_irq_init(dev);
 
 	/* Try to make sure MCHBAR is enabled before poking at it */
 	intel_setup_mchbar(dev);
@@ -2103,13 +2074,21 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	return 0;
 
 out_gem_unload:
+	if (dev_priv->mm.inactive_shrinker.shrink)
+		unregister_shrinker(&dev_priv->mm.inactive_shrinker);
+
 	if (dev->pdev->msi_enabled)
 		pci_disable_msi(dev->pdev);
 
 	intel_teardown_gmbus(dev);
 	intel_teardown_mchbar(dev);
 	destroy_workqueue(dev_priv->wq);
-out_iomapfree:
+out_mtrrfree:
+	if (dev_priv->mm.gtt_mtrr >= 0) {
+		mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
+			 dev->agp->agp_info.aper_size * 1024 * 1024);
+		dev_priv->mm.gtt_mtrr = -1;
+	}
 	io_mapping_free(dev_priv->mm.gtt_mapping);
 out_rmmap:
 	pci_iounmap(dev->pdev, dev_priv->regs);

drivers/gpu/drm/i915/i915_drv.c

@@ -52,7 +52,7 @@ module_param_named(powersave, i915_powersave, int, 0600);
 unsigned int i915_semaphores = 0;
 module_param_named(semaphores, i915_semaphores, int, 0600);
 
-unsigned int i915_enable_rc6 = 1;
+unsigned int i915_enable_rc6 = 0;
 module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
 
 unsigned int i915_enable_fbc = 0;
@@ -577,6 +577,7 @@ int i915_reset(struct drm_device *dev, u8 flags)
 	if (get_seconds() - dev_priv->last_gpu_reset < 5) {
 		DRM_ERROR("GPU hanging too fast, declaring wedged!\n");
 	} else switch (INTEL_INFO(dev)->gen) {
+	case 7:
 	case 6:
 		ret = gen6_do_reset(dev, flags);
 		/* If reset with a user forcewake, try to restore */
@@ -765,14 +766,6 @@ static struct drm_driver driver = {
 	.resume = i915_resume,
 
 	.device_is_agp = i915_driver_device_is_agp,
-	.enable_vblank = i915_enable_vblank,
-	.disable_vblank = i915_disable_vblank,
-	.get_vblank_timestamp = i915_get_vblank_timestamp,
-	.get_scanout_position = i915_get_crtc_scanoutpos,
-	.irq_preinstall = i915_driver_irq_preinstall,
-	.irq_postinstall = i915_driver_irq_postinstall,
-	.irq_uninstall = i915_driver_irq_uninstall,
-	.irq_handler = i915_driver_irq_handler,
 	.reclaim_buffers = drm_core_reclaim_buffers,
 	.master_create = i915_master_create,
 	.master_destroy = i915_master_destroy,

drivers/gpu/drm/i915/i915_drv.h

@@ -997,8 +997,6 @@ extern unsigned int i915_enable_fbc;
 
 extern int i915_suspend(struct drm_device *dev, pm_message_t state);
 extern int i915_resume(struct drm_device *dev);
-extern void i915_save_display(struct drm_device *dev);
-extern void i915_restore_display(struct drm_device *dev);
 extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
 extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
 
@@ -1033,33 +1031,12 @@ extern int i915_irq_emit(struct drm_device *dev, void *data,
 extern int i915_irq_wait(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
 
-extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
-extern void i915_driver_irq_preinstall(struct drm_device * dev);
-extern int i915_driver_irq_postinstall(struct drm_device *dev);
-extern void i915_driver_irq_uninstall(struct drm_device * dev);
-
-extern irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS);
-extern void ironlake_irq_preinstall(struct drm_device *dev);
-extern int ironlake_irq_postinstall(struct drm_device *dev);
-extern void ironlake_irq_uninstall(struct drm_device *dev);
-
-extern irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS);
-extern void ivybridge_irq_preinstall(struct drm_device *dev);
-extern int ivybridge_irq_postinstall(struct drm_device *dev);
-extern void ivybridge_irq_uninstall(struct drm_device *dev);
+extern void intel_irq_init(struct drm_device *dev);
 
 extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
 extern int i915_vblank_pipe_get(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
-extern int i915_enable_vblank(struct drm_device *dev, int crtc);
-extern void i915_disable_vblank(struct drm_device *dev, int crtc);
-extern int ironlake_enable_vblank(struct drm_device *dev, int crtc);
-extern void ironlake_disable_vblank(struct drm_device *dev, int crtc);
-extern int ivybridge_enable_vblank(struct drm_device *dev, int crtc);
-extern void ivybridge_disable_vblank(struct drm_device *dev, int crtc);
-extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc);
-extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc);
 extern int i915_vblank_swap(struct drm_device *dev, void *data,
 			    struct drm_file *file_priv);
 
@@ -1070,13 +1047,6 @@ void
 i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
 
 void intel_enable_asle (struct drm_device *dev);
-int i915_get_vblank_timestamp(struct drm_device *dev, int crtc,
-			      int *max_error,
-			      struct timeval *vblank_time,
-			      unsigned flags);
-
-int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
-			     int *vpos, int *hpos);
 
 #ifdef CONFIG_DEBUG_FS
 extern void i915_destroy_error_state(struct drm_device *dev);

drivers/gpu/drm/i915/i915_irq.c

@@ -152,7 +152,7 @@ i915_pipe_enabled(struct drm_device *dev, int pipe)
 /* Called from drm generic code, passed a 'crtc', which
  * we use as a pipe index
  */
-u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
+static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long high_frame;
@@ -184,7 +184,7 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
 	return (high1 << 8) | low;
 }
 
-u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
+static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int reg = PIPE_FRMCOUNT_GM45(pipe);
@@ -198,7 +198,7 @@ u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
 	return I915_READ(reg);
 }
 
-int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
+static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
 			     int *vpos, int *hpos)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -264,7 +264,7 @@ int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
 	return ret;
 }
 
-int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
+static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
 			      int *max_error,
 			      struct timeval *vblank_time,
 			      unsigned flags)
@@ -462,7 +462,7 @@ static void pch_irq_handler(struct drm_device *dev)
 		DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
 }
 
-irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
+static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -550,7 +550,7 @@ done:
 	return ret;
 }
 
-irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
+static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -1209,7 +1209,7 @@ static void i915_pageflip_stall_check(struct drm_device *dev, int pipe)
 	}
 }
 
-irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
+static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -1454,7 +1454,7 @@ int i915_irq_wait(struct drm_device *dev, void *data,
 /* Called from drm generic code, passed 'crtc' which
  * we use as a pipe index
  */
-int i915_enable_vblank(struct drm_device *dev, int pipe)
+static int i915_enable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
@@ -1478,7 +1478,7 @@ int i915_enable_vblank(struct drm_device *dev, int pipe)
 	return 0;
 }
 
-int ironlake_enable_vblank(struct drm_device *dev, int pipe)
+static int ironlake_enable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
@@ -1494,7 +1494,7 @@ int ironlake_enable_vblank(struct drm_device *dev, int pipe)
 	return 0;
 }
 
-int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
+static int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
@@ -1513,7 +1513,7 @@ int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
 /* Called from drm generic code, passed 'crtc' which
  * we use as a pipe index
  */
-void i915_disable_vblank(struct drm_device *dev, int pipe)
+static void i915_disable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
@@ -1529,7 +1529,7 @@ void i915_disable_vblank(struct drm_device *dev, int pipe)
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 }
 
-void ironlake_disable_vblank(struct drm_device *dev, int pipe)
+static void ironlake_disable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
@@ -1540,7 +1540,7 @@ void ironlake_disable_vblank(struct drm_device *dev, int pipe)
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 }
 
-void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
+static void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
@@ -1728,7 +1728,7 @@ repeat:
 
 /* drm_dma.h hooks
 */
-void ironlake_irq_preinstall(struct drm_device *dev)
+static void ironlake_irq_preinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
@@ -1740,7 +1740,7 @@ void ironlake_irq_preinstall(struct drm_device *dev)
 		INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work);
 
 	I915_WRITE(HWSTAM, 0xeffe);
-	if (IS_GEN6(dev)) {
+	if (IS_GEN6(dev) || IS_GEN7(dev)) {
 		/* Workaround stalls observed on Sandy Bridge GPUs by
 		 * making the blitter command streamer generate a
 		 * write to the Hardware Status Page for
@@ -1769,7 +1769,7 @@ void ironlake_irq_preinstall(struct drm_device *dev)
 	POSTING_READ(SDEIER);
 }
 
-int ironlake_irq_postinstall(struct drm_device *dev)
+static int ironlake_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	/* enable kind of interrupts always enabled */
@@ -1841,7 +1841,7 @@ int ironlake_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-int ivybridge_irq_postinstall(struct drm_device *dev)
+static int ivybridge_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	/* enable kind of interrupts always enabled */
@@ -1891,7 +1891,7 @@ int ivybridge_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-void i915_driver_irq_preinstall(struct drm_device * dev)
+static void i915_driver_irq_preinstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int pipe;
@@ -1918,7 +1918,7 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
  * Must be called after intel_modeset_init or hotplug interrupts won't be
  * enabled correctly.
  */
-int i915_driver_irq_postinstall(struct drm_device *dev)
+static int i915_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
@@ -1994,7 +1994,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-void ironlake_irq_uninstall(struct drm_device *dev)
+static void ironlake_irq_uninstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
@@ -2014,7 +2014,7 @@ void ironlake_irq_uninstall(struct drm_device *dev)
 	I915_WRITE(GTIIR, I915_READ(GTIIR));
 }
 
-void i915_driver_irq_uninstall(struct drm_device * dev)
+static void i915_driver_irq_uninstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int pipe;
@@ -2040,3 +2040,41 @@ void i915_driver_irq_uninstall(struct drm_device * dev)
 			   I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
 	I915_WRITE(IIR, I915_READ(IIR));
 }
+
+void intel_irq_init(struct drm_device *dev)
+{
+	dev->driver->get_vblank_counter = i915_get_vblank_counter;
+	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+	if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
+		dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
+		dev->driver->get_vblank_counter = gm45_get_vblank_counter;
+	}
+
+
+	dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
+	dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
+
+	if (IS_IVYBRIDGE(dev)) {
+		/* Share pre & uninstall handlers with ILK/SNB */
+		dev->driver->irq_handler = ivybridge_irq_handler;
+		dev->driver->irq_preinstall = ironlake_irq_preinstall;
+		dev->driver->irq_postinstall = ivybridge_irq_postinstall;
+		dev->driver->irq_uninstall = ironlake_irq_uninstall;
+		dev->driver->enable_vblank = ivybridge_enable_vblank;
+		dev->driver->disable_vblank = ivybridge_disable_vblank;
+	} else if (HAS_PCH_SPLIT(dev)) {
+		dev->driver->irq_handler = ironlake_irq_handler;
+		dev->driver->irq_preinstall = ironlake_irq_preinstall;
+		dev->driver->irq_postinstall = ironlake_irq_postinstall;
+		dev->driver->irq_uninstall = ironlake_irq_uninstall;
+		dev->driver->enable_vblank = ironlake_enable_vblank;
+		dev->driver->disable_vblank = ironlake_disable_vblank;
+	} else {
+		dev->driver->irq_preinstall = i915_driver_irq_preinstall;
+		dev->driver->irq_postinstall = i915_driver_irq_postinstall;
+		dev->driver->irq_uninstall = i915_driver_irq_uninstall;
+		dev->driver->irq_handler = i915_driver_irq_handler;
+		dev->driver->enable_vblank = i915_enable_vblank;
+		dev->driver->disable_vblank = i915_disable_vblank;
+	}
+}

drivers/gpu/drm/i915/i915_suspend.c

@@ -597,7 +597,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev)
 	return;
 }
 
-void i915_save_display(struct drm_device *dev)
+static void i915_save_display(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
@@ -678,7 +678,6 @@ void i915_save_display(struct drm_device *dev)
 	}
 
 	/* VGA state */
-	mutex_lock(&dev->struct_mutex);
 	dev_priv->saveVGA0 = I915_READ(VGA0);
 	dev_priv->saveVGA1 = I915_READ(VGA1);
 	dev_priv->saveVGA_PD = I915_READ(VGA_PD);
@@ -688,10 +687,9 @@ void i915_save_display(struct drm_device *dev)
 		dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
 
 	i915_save_vga(dev);
-	mutex_unlock(&dev->struct_mutex);
 }
 
-void i915_restore_display(struct drm_device *dev)
+static void i915_restore_display(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
@@ -783,7 +781,6 @@ void i915_restore_display(struct drm_device *dev)
 	else
 		I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
 
-	mutex_lock(&dev->struct_mutex);
 	I915_WRITE(VGA0, dev_priv->saveVGA0);
 	I915_WRITE(VGA1, dev_priv->saveVGA1);
 	I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
@@ -791,7 +788,6 @@ void i915_restore_display(struct drm_device *dev)
 	udelay(150);
 
 	i915_restore_vga(dev);
-	mutex_unlock(&dev->struct_mutex);
 }
 
 int i915_save_state(struct drm_device *dev)
@@ -801,6 +797,8 @@ int i915_save_state(struct drm_device *dev)
 
 	pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
 
+	mutex_lock(&dev->struct_mutex);
+
 	/* Hardware status page */
 	dev_priv->saveHWS = I915_READ(HWS_PGA);
 
@@ -840,6 +838,8 @@ int i915_save_state(struct drm_device *dev)
 	for (i = 0; i < 3; i++)
 		dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -850,6 +850,8 @@ int i915_restore_state(struct drm_device *dev)
 
 	pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
 
+	mutex_lock(&dev->struct_mutex);
+
 	/* Hardware status page */
 	I915_WRITE(HWS_PGA, dev_priv->saveHWS);
 
@@ -867,6 +869,7 @@ int i915_restore_state(struct drm_device *dev)
 		I915_WRITE(IER, dev_priv->saveIER);
 		I915_WRITE(IMR, dev_priv->saveIMR);
 	}
+	mutex_unlock(&dev->struct_mutex);
 
 	intel_init_clock_gating(dev);
 
@@ -878,6 +881,8 @@ int i915_restore_state(struct drm_device *dev)
 	if (IS_GEN6(dev))
 		gen6_enable_rps(dev_priv);
 
+	mutex_lock(&dev->struct_mutex);
+
 	/* Cache mode state */
 	I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
 
@@ -891,6 +896,8 @@ int i915_restore_state(struct drm_device *dev)
 	for (i = 0; i < 3; i++)
 		I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
 
+	mutex_unlock(&dev->struct_mutex);
+
 	intel_i2c_reset(dev);
 
 	return 0;