|
@@ -1,1724 +0,0 @@
|
|
|
-/*
|
|
|
- * linux/drivers/mmc/mmc.c
|
|
|
- *
|
|
|
- * Copyright (C) 2003-2004 Russell King, All Rights Reserved.
|
|
|
- * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
|
|
|
- * SD support Copyright (C) 2005 Pierre Ossman, All Rights Reserved.
|
|
|
- * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
|
|
|
- *
|
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
|
- * it under the terms of the GNU General Public License version 2 as
|
|
|
- * published by the Free Software Foundation.
|
|
|
- */
|
|
|
-#include <linux/module.h>
|
|
|
-#include <linux/init.h>
|
|
|
-#include <linux/interrupt.h>
|
|
|
-#include <linux/completion.h>
|
|
|
-#include <linux/device.h>
|
|
|
-#include <linux/delay.h>
|
|
|
-#include <linux/pagemap.h>
|
|
|
-#include <linux/err.h>
|
|
|
-#include <asm/scatterlist.h>
|
|
|
-#include <linux/scatterlist.h>
|
|
|
-
|
|
|
-#include <linux/mmc/card.h>
|
|
|
-#include <linux/mmc/host.h>
|
|
|
-#include <linux/mmc/protocol.h>
|
|
|
-
|
|
|
-#include "mmc.h"
|
|
|
-
|
|
|
-#define CMD_RETRIES 3
|
|
|
-
|
|
|
-/*
|
|
|
- * OCR Bit positions to 10s of Vdd mV.
|
|
|
- */
|
|
|
-static const unsigned short mmc_ocr_bit_to_vdd[] = {
|
|
|
- 150, 155, 160, 165, 170, 180, 190, 200,
|
|
|
- 210, 220, 230, 240, 250, 260, 270, 280,
|
|
|
- 290, 300, 310, 320, 330, 340, 350, 360
|
|
|
-};
|
|
|
-
|
|
|
-static const unsigned int tran_exp[] = {
|
|
|
- 10000, 100000, 1000000, 10000000,
|
|
|
- 0, 0, 0, 0
|
|
|
-};
|
|
|
-
|
|
|
-static const unsigned char tran_mant[] = {
|
|
|
- 0, 10, 12, 13, 15, 20, 25, 30,
|
|
|
- 35, 40, 45, 50, 55, 60, 70, 80,
|
|
|
-};
|
|
|
-
|
|
|
-static const unsigned int tacc_exp[] = {
|
|
|
- 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000,
|
|
|
-};
|
|
|
-
|
|
|
-static const unsigned int tacc_mant[] = {
|
|
|
- 0, 10, 12, 13, 15, 20, 25, 30,
|
|
|
- 35, 40, 45, 50, 55, 60, 70, 80,
|
|
|
-};
|
|
|
-
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_request_done - finish processing an MMC request
|
|
|
- * @host: MMC host which completed request
|
|
|
- * @mrq: MMC request which request
|
|
|
- *
|
|
|
- * MMC drivers should call this function when they have completed
|
|
|
- * their processing of a request.
|
|
|
- */
|
|
|
-void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
|
|
|
-{
|
|
|
- struct mmc_command *cmd = mrq->cmd;
|
|
|
- int err = cmd->error;
|
|
|
-
|
|
|
- pr_debug("%s: req done (CMD%u): %d/%d/%d: %08x %08x %08x %08x\n",
|
|
|
- mmc_hostname(host), cmd->opcode, err,
|
|
|
- mrq->data ? mrq->data->error : 0,
|
|
|
- mrq->stop ? mrq->stop->error : 0,
|
|
|
- cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
|
|
|
-
|
|
|
- if (err && cmd->retries) {
|
|
|
- cmd->retries--;
|
|
|
- cmd->error = 0;
|
|
|
- host->ops->request(host, mrq);
|
|
|
- } else if (mrq->done) {
|
|
|
- mrq->done(mrq);
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_request_done);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_start_request - start a command on a host
|
|
|
- * @host: MMC host to start command on
|
|
|
- * @mrq: MMC request to start
|
|
|
- *
|
|
|
- * Queue a command on the specified host. We expect the
|
|
|
- * caller to be holding the host lock with interrupts disabled.
|
|
|
- */
|
|
|
-void
|
|
|
-mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
|
|
|
-{
|
|
|
- pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
|
|
|
- mmc_hostname(host), mrq->cmd->opcode,
|
|
|
- mrq->cmd->arg, mrq->cmd->flags);
|
|
|
-
|
|
|
- WARN_ON(!host->claimed);
|
|
|
-
|
|
|
- mrq->cmd->error = 0;
|
|
|
- mrq->cmd->mrq = mrq;
|
|
|
- if (mrq->data) {
|
|
|
- BUG_ON(mrq->data->blksz > host->max_blk_size);
|
|
|
- BUG_ON(mrq->data->blocks > host->max_blk_count);
|
|
|
- BUG_ON(mrq->data->blocks * mrq->data->blksz >
|
|
|
- host->max_req_size);
|
|
|
-
|
|
|
- mrq->cmd->data = mrq->data;
|
|
|
- mrq->data->error = 0;
|
|
|
- mrq->data->mrq = mrq;
|
|
|
- if (mrq->stop) {
|
|
|
- mrq->data->stop = mrq->stop;
|
|
|
- mrq->stop->error = 0;
|
|
|
- mrq->stop->mrq = mrq;
|
|
|
- }
|
|
|
- }
|
|
|
- host->ops->request(host, mrq);
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_start_request);
|
|
|
-
|
|
|
-static void mmc_wait_done(struct mmc_request *mrq)
|
|
|
-{
|
|
|
- complete(mrq->done_data);
|
|
|
-}
|
|
|
-
|
|
|
-int mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
|
|
|
-{
|
|
|
- DECLARE_COMPLETION_ONSTACK(complete);
|
|
|
-
|
|
|
- mrq->done_data = &complete;
|
|
|
- mrq->done = mmc_wait_done;
|
|
|
-
|
|
|
- mmc_start_request(host, mrq);
|
|
|
-
|
|
|
- wait_for_completion(&complete);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_wait_for_req);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_wait_for_cmd - start a command and wait for completion
|
|
|
- * @host: MMC host to start command
|
|
|
- * @cmd: MMC command to start
|
|
|
- * @retries: maximum number of retries
|
|
|
- *
|
|
|
- * Start a new MMC command for a host, and wait for the command
|
|
|
- * to complete. Return any error that occurred while the command
|
|
|
- * was executing. Do not attempt to parse the response.
|
|
|
- */
|
|
|
-int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries)
|
|
|
-{
|
|
|
- struct mmc_request mrq;
|
|
|
-
|
|
|
- BUG_ON(!host->claimed);
|
|
|
-
|
|
|
- memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
-
|
|
|
- memset(cmd->resp, 0, sizeof(cmd->resp));
|
|
|
- cmd->retries = retries;
|
|
|
-
|
|
|
- mrq.cmd = cmd;
|
|
|
- cmd->data = NULL;
|
|
|
-
|
|
|
- mmc_wait_for_req(host, &mrq);
|
|
|
-
|
|
|
- return cmd->error;
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_wait_for_cmd);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_wait_for_app_cmd - start an application command and wait for
|
|
|
- completion
|
|
|
- * @host: MMC host to start command
|
|
|
- * @rca: RCA to send MMC_APP_CMD to
|
|
|
- * @cmd: MMC command to start
|
|
|
- * @retries: maximum number of retries
|
|
|
- *
|
|
|
- * Sends a MMC_APP_CMD, checks the card response, sends the command
|
|
|
- * in the parameter and waits for it to complete. Return any error
|
|
|
- * that occurred while the command was executing. Do not attempt to
|
|
|
- * parse the response.
|
|
|
- */
|
|
|
-int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca,
|
|
|
- struct mmc_command *cmd, int retries)
|
|
|
-{
|
|
|
- struct mmc_request mrq;
|
|
|
- struct mmc_command appcmd;
|
|
|
-
|
|
|
- int i, err;
|
|
|
-
|
|
|
- BUG_ON(!host->claimed);
|
|
|
- BUG_ON(retries < 0);
|
|
|
-
|
|
|
- err = MMC_ERR_INVALID;
|
|
|
-
|
|
|
- /*
|
|
|
- * We have to resend MMC_APP_CMD for each attempt so
|
|
|
- * we cannot use the retries field in mmc_command.
|
|
|
- */
|
|
|
- for (i = 0;i <= retries;i++) {
|
|
|
- memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
-
|
|
|
- appcmd.opcode = MMC_APP_CMD;
|
|
|
- appcmd.arg = rca << 16;
|
|
|
- appcmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
- appcmd.retries = 0;
|
|
|
- memset(appcmd.resp, 0, sizeof(appcmd.resp));
|
|
|
- appcmd.data = NULL;
|
|
|
-
|
|
|
- mrq.cmd = &appcmd;
|
|
|
- appcmd.data = NULL;
|
|
|
-
|
|
|
- mmc_wait_for_req(host, &mrq);
|
|
|
-
|
|
|
- if (appcmd.error) {
|
|
|
- err = appcmd.error;
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- /* Check that card supported application commands */
|
|
|
- if (!(appcmd.resp[0] & R1_APP_CMD))
|
|
|
- return MMC_ERR_FAILED;
|
|
|
-
|
|
|
- memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
-
|
|
|
- memset(cmd->resp, 0, sizeof(cmd->resp));
|
|
|
- cmd->retries = 0;
|
|
|
-
|
|
|
- mrq.cmd = cmd;
|
|
|
- cmd->data = NULL;
|
|
|
-
|
|
|
- mmc_wait_for_req(host, &mrq);
|
|
|
-
|
|
|
- err = cmd->error;
|
|
|
- if (cmd->error == MMC_ERR_NONE)
|
|
|
- break;
|
|
|
- }
|
|
|
-
|
|
|
- return err;
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_wait_for_app_cmd);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_set_data_timeout - set the timeout for a data command
|
|
|
- * @data: data phase for command
|
|
|
- * @card: the MMC card associated with the data transfer
|
|
|
- * @write: flag to differentiate reads from writes
|
|
|
- */
|
|
|
-void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
|
|
|
- int write)
|
|
|
-{
|
|
|
- unsigned int mult;
|
|
|
-
|
|
|
- /*
|
|
|
- * SD cards use a 100 multiplier rather than 10
|
|
|
- */
|
|
|
- mult = mmc_card_sd(card) ? 100 : 10;
|
|
|
-
|
|
|
- /*
|
|
|
- * Scale up the multiplier (and therefore the timeout) by
|
|
|
- * the r2w factor for writes.
|
|
|
- */
|
|
|
- if (write)
|
|
|
- mult <<= card->csd.r2w_factor;
|
|
|
-
|
|
|
- data->timeout_ns = card->csd.tacc_ns * mult;
|
|
|
- data->timeout_clks = card->csd.tacc_clks * mult;
|
|
|
-
|
|
|
- /*
|
|
|
- * SD cards also have an upper limit on the timeout.
|
|
|
- */
|
|
|
- if (mmc_card_sd(card)) {
|
|
|
- unsigned int timeout_us, limit_us;
|
|
|
-
|
|
|
- timeout_us = data->timeout_ns / 1000;
|
|
|
- timeout_us += data->timeout_clks * 1000 /
|
|
|
- (card->host->ios.clock / 1000);
|
|
|
-
|
|
|
- if (write)
|
|
|
- limit_us = 250000;
|
|
|
- else
|
|
|
- limit_us = 100000;
|
|
|
-
|
|
|
- /*
|
|
|
- * SDHC cards always use these fixed values.
|
|
|
- */
|
|
|
- if (timeout_us > limit_us || mmc_card_blockaddr(card)) {
|
|
|
- data->timeout_ns = limit_us * 1000;
|
|
|
- data->timeout_clks = 0;
|
|
|
- }
|
|
|
- }
|
|
|
-}
|
|
|
-EXPORT_SYMBOL(mmc_set_data_timeout);
|
|
|
-
|
|
|
-static int mmc_select_card(struct mmc_host *host, struct mmc_card *card);
|
|
|
-
|
|
|
-/**
|
|
|
- * __mmc_claim_host - exclusively claim a host
|
|
|
- * @host: mmc host to claim
|
|
|
- * @card: mmc card to claim host for
|
|
|
- *
|
|
|
- * Claim a host for a set of operations. If a valid card
|
|
|
- * is passed and this wasn't the last card selected, select
|
|
|
- * the card before returning.
|
|
|
- *
|
|
|
- * Note: you should use mmc_card_claim_host or mmc_claim_host.
|
|
|
- */
|
|
|
-int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card)
|
|
|
-{
|
|
|
- DECLARE_WAITQUEUE(wait, current);
|
|
|
- unsigned long flags;
|
|
|
- int err = 0;
|
|
|
-
|
|
|
- add_wait_queue(&host->wq, &wait);
|
|
|
- spin_lock_irqsave(&host->lock, flags);
|
|
|
- while (1) {
|
|
|
- set_current_state(TASK_UNINTERRUPTIBLE);
|
|
|
- if (!host->claimed)
|
|
|
- break;
|
|
|
- spin_unlock_irqrestore(&host->lock, flags);
|
|
|
- schedule();
|
|
|
- spin_lock_irqsave(&host->lock, flags);
|
|
|
- }
|
|
|
- set_current_state(TASK_RUNNING);
|
|
|
- host->claimed = 1;
|
|
|
- spin_unlock_irqrestore(&host->lock, flags);
|
|
|
- remove_wait_queue(&host->wq, &wait);
|
|
|
-
|
|
|
- if (card != (void *)-1) {
|
|
|
- err = mmc_select_card(host, card);
|
|
|
- if (err != MMC_ERR_NONE)
|
|
|
- return err;
|
|
|
- }
|
|
|
-
|
|
|
- return err;
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(__mmc_claim_host);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_release_host - release a host
|
|
|
- * @host: mmc host to release
|
|
|
- *
|
|
|
- * Release a MMC host, allowing others to claim the host
|
|
|
- * for their operations.
|
|
|
- */
|
|
|
-void mmc_release_host(struct mmc_host *host)
|
|
|
-{
|
|
|
- unsigned long flags;
|
|
|
-
|
|
|
- BUG_ON(!host->claimed);
|
|
|
-
|
|
|
- spin_lock_irqsave(&host->lock, flags);
|
|
|
- host->claimed = 0;
|
|
|
- spin_unlock_irqrestore(&host->lock, flags);
|
|
|
-
|
|
|
- wake_up(&host->wq);
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_release_host);
|
|
|
-
|
|
|
-static inline void mmc_set_ios(struct mmc_host *host)
|
|
|
-{
|
|
|
- struct mmc_ios *ios = &host->ios;
|
|
|
-
|
|
|
- pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
|
|
|
- "width %u timing %u\n",
|
|
|
- mmc_hostname(host), ios->clock, ios->bus_mode,
|
|
|
- ios->power_mode, ios->chip_select, ios->vdd,
|
|
|
- ios->bus_width, ios->timing);
|
|
|
-
|
|
|
- host->ops->set_ios(host, ios);
|
|
|
-}
|
|
|
-
|
|
|
-static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
|
|
|
-{
|
|
|
- int err;
|
|
|
- struct mmc_command cmd;
|
|
|
-
|
|
|
- BUG_ON(!host->claimed);
|
|
|
-
|
|
|
- if (host->card_selected == card)
|
|
|
- return MMC_ERR_NONE;
|
|
|
-
|
|
|
- host->card_selected = card;
|
|
|
-
|
|
|
- cmd.opcode = MMC_SELECT_CARD;
|
|
|
- cmd.arg = card->rca << 16;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
|
|
|
- if (err != MMC_ERR_NONE)
|
|
|
- return err;
|
|
|
-
|
|
|
- /*
|
|
|
- * We can only change the bus width of SD cards when
|
|
|
- * they are selected so we have to put the handling
|
|
|
- * here.
|
|
|
- *
|
|
|
- * The card is in 1 bit mode by default so
|
|
|
- * we only need to change if it supports the
|
|
|
- * wider version.
|
|
|
- */
|
|
|
- if (mmc_card_sd(card) &&
|
|
|
- (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
|
|
|
-
|
|
|
- /*
|
|
|
- * Default bus width is 1 bit.
|
|
|
- */
|
|
|
- host->ios.bus_width = MMC_BUS_WIDTH_1;
|
|
|
-
|
|
|
- if (host->caps & MMC_CAP_4_BIT_DATA) {
|
|
|
- struct mmc_command cmd;
|
|
|
- cmd.opcode = SD_APP_SET_BUS_WIDTH;
|
|
|
- cmd.arg = SD_BUS_WIDTH_4;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
-
|
|
|
- err = mmc_wait_for_app_cmd(host, card->rca, &cmd,
|
|
|
- CMD_RETRIES);
|
|
|
- if (err != MMC_ERR_NONE)
|
|
|
- return err;
|
|
|
-
|
|
|
- host->ios.bus_width = MMC_BUS_WIDTH_4;
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- mmc_set_ios(host);
|
|
|
-
|
|
|
- return MMC_ERR_NONE;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Ensure that no card is selected.
|
|
|
- */
|
|
|
-static void mmc_deselect_cards(struct mmc_host *host)
|
|
|
-{
|
|
|
- struct mmc_command cmd;
|
|
|
-
|
|
|
- if (host->card_selected) {
|
|
|
- host->card_selected = NULL;
|
|
|
-
|
|
|
- cmd.opcode = MMC_SELECT_CARD;
|
|
|
- cmd.arg = 0;
|
|
|
- cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
|
|
|
-
|
|
|
- mmc_wait_for_cmd(host, &cmd, 0);
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static inline void mmc_delay(unsigned int ms)
|
|
|
-{
|
|
|
- if (ms < 1000 / HZ) {
|
|
|
- cond_resched();
|
|
|
- mdelay(ms);
|
|
|
- } else {
|
|
|
- msleep(ms);
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Mask off any voltages we don't support and select
|
|
|
- * the lowest voltage
|
|
|
- */
|
|
|
-static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
|
|
|
-{
|
|
|
- int bit;
|
|
|
-
|
|
|
- ocr &= host->ocr_avail;
|
|
|
-
|
|
|
- bit = ffs(ocr);
|
|
|
- if (bit) {
|
|
|
- bit -= 1;
|
|
|
-
|
|
|
- ocr &= 3 << bit;
|
|
|
-
|
|
|
- host->ios.vdd = bit;
|
|
|
- mmc_set_ios(host);
|
|
|
- } else {
|
|
|
- ocr = 0;
|
|
|
- }
|
|
|
-
|
|
|
- return ocr;
|
|
|
-}
|
|
|
-
|
|
|
-#define UNSTUFF_BITS(resp,start,size) \
|
|
|
- ({ \
|
|
|
- const int __size = size; \
|
|
|
- const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \
|
|
|
- const int __off = 3 - ((start) / 32); \
|
|
|
- const int __shft = (start) & 31; \
|
|
|
- u32 __res; \
|
|
|
- \
|
|
|
- __res = resp[__off] >> __shft; \
|
|
|
- if (__size + __shft > 32) \
|
|
|
- __res |= resp[__off-1] << ((32 - __shft) % 32); \
|
|
|
- __res & __mask; \
|
|
|
- })
|
|
|
-
|
|
|
-/*
|
|
|
- * Given the decoded CSD structure, decode the raw CID to our CID structure.
|
|
|
- */
|
|
|
-static void mmc_decode_cid(struct mmc_card *card)
|
|
|
-{
|
|
|
- u32 *resp = card->raw_cid;
|
|
|
-
|
|
|
- memset(&card->cid, 0, sizeof(struct mmc_cid));
|
|
|
-
|
|
|
- if (mmc_card_sd(card)) {
|
|
|
- /*
|
|
|
- * SD doesn't currently have a version field so we will
|
|
|
- * have to assume we can parse this.
|
|
|
- */
|
|
|
- card->cid.manfid = UNSTUFF_BITS(resp, 120, 8);
|
|
|
- card->cid.oemid = UNSTUFF_BITS(resp, 104, 16);
|
|
|
- card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8);
|
|
|
- card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8);
|
|
|
- card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8);
|
|
|
- card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8);
|
|
|
- card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8);
|
|
|
- card->cid.hwrev = UNSTUFF_BITS(resp, 60, 4);
|
|
|
- card->cid.fwrev = UNSTUFF_BITS(resp, 56, 4);
|
|
|
- card->cid.serial = UNSTUFF_BITS(resp, 24, 32);
|
|
|
- card->cid.year = UNSTUFF_BITS(resp, 12, 8);
|
|
|
- card->cid.month = UNSTUFF_BITS(resp, 8, 4);
|
|
|
-
|
|
|
- card->cid.year += 2000; /* SD cards year offset */
|
|
|
- } else {
|
|
|
- /*
|
|
|
- * The selection of the format here is based upon published
|
|
|
- * specs from sandisk and from what people have reported.
|
|
|
- */
|
|
|
- switch (card->csd.mmca_vsn) {
|
|
|
- case 0: /* MMC v1.0 - v1.2 */
|
|
|
- case 1: /* MMC v1.4 */
|
|
|
- card->cid.manfid = UNSTUFF_BITS(resp, 104, 24);
|
|
|
- card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8);
|
|
|
- card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8);
|
|
|
- card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8);
|
|
|
- card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8);
|
|
|
- card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8);
|
|
|
- card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8);
|
|
|
- card->cid.prod_name[6] = UNSTUFF_BITS(resp, 48, 8);
|
|
|
- card->cid.hwrev = UNSTUFF_BITS(resp, 44, 4);
|
|
|
- card->cid.fwrev = UNSTUFF_BITS(resp, 40, 4);
|
|
|
- card->cid.serial = UNSTUFF_BITS(resp, 16, 24);
|
|
|
- card->cid.month = UNSTUFF_BITS(resp, 12, 4);
|
|
|
- card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997;
|
|
|
- break;
|
|
|
-
|
|
|
- case 2: /* MMC v2.0 - v2.2 */
|
|
|
- case 3: /* MMC v3.1 - v3.3 */
|
|
|
- case 4: /* MMC v4 */
|
|
|
- card->cid.manfid = UNSTUFF_BITS(resp, 120, 8);
|
|
|
- card->cid.oemid = UNSTUFF_BITS(resp, 104, 16);
|
|
|
- card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8);
|
|
|
- card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8);
|
|
|
- card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8);
|
|
|
- card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8);
|
|
|
- card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8);
|
|
|
- card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8);
|
|
|
- card->cid.serial = UNSTUFF_BITS(resp, 16, 32);
|
|
|
- card->cid.month = UNSTUFF_BITS(resp, 12, 4);
|
|
|
- card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997;
|
|
|
- break;
|
|
|
-
|
|
|
- default:
|
|
|
- printk("%s: card has unknown MMCA version %d\n",
|
|
|
- mmc_hostname(card->host), card->csd.mmca_vsn);
|
|
|
- mmc_card_set_bad(card);
|
|
|
- break;
|
|
|
- }
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Given a 128-bit response, decode to our card CSD structure.
|
|
|
- */
|
|
|
-static void mmc_decode_csd(struct mmc_card *card)
|
|
|
-{
|
|
|
- struct mmc_csd *csd = &card->csd;
|
|
|
- unsigned int e, m, csd_struct;
|
|
|
- u32 *resp = card->raw_csd;
|
|
|
-
|
|
|
- if (mmc_card_sd(card)) {
|
|
|
- csd_struct = UNSTUFF_BITS(resp, 126, 2);
|
|
|
-
|
|
|
- switch (csd_struct) {
|
|
|
- case 0:
|
|
|
- m = UNSTUFF_BITS(resp, 115, 4);
|
|
|
- e = UNSTUFF_BITS(resp, 112, 3);
|
|
|
- csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10;
|
|
|
- csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100;
|
|
|
-
|
|
|
- m = UNSTUFF_BITS(resp, 99, 4);
|
|
|
- e = UNSTUFF_BITS(resp, 96, 3);
|
|
|
- csd->max_dtr = tran_exp[e] * tran_mant[m];
|
|
|
- csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
|
|
|
-
|
|
|
- e = UNSTUFF_BITS(resp, 47, 3);
|
|
|
- m = UNSTUFF_BITS(resp, 62, 12);
|
|
|
- csd->capacity = (1 + m) << (e + 2);
|
|
|
-
|
|
|
- csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4);
|
|
|
- csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
|
|
|
- csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
|
|
|
- csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
|
|
|
- csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
|
|
|
- csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
|
|
|
- csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
|
|
|
- break;
|
|
|
- case 1:
|
|
|
- /*
|
|
|
- * This is a block-addressed SDHC card. Most
|
|
|
- * interesting fields are unused and have fixed
|
|
|
- * values. To avoid getting tripped by buggy cards,
|
|
|
- * we assume those fixed values ourselves.
|
|
|
- */
|
|
|
- mmc_card_set_blockaddr(card);
|
|
|
-
|
|
|
- csd->tacc_ns = 0; /* Unused */
|
|
|
- csd->tacc_clks = 0; /* Unused */
|
|
|
-
|
|
|
- m = UNSTUFF_BITS(resp, 99, 4);
|
|
|
- e = UNSTUFF_BITS(resp, 96, 3);
|
|
|
- csd->max_dtr = tran_exp[e] * tran_mant[m];
|
|
|
- csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
|
|
|
-
|
|
|
- m = UNSTUFF_BITS(resp, 48, 22);
|
|
|
- csd->capacity = (1 + m) << 10;
|
|
|
-
|
|
|
- csd->read_blkbits = 9;
|
|
|
- csd->read_partial = 0;
|
|
|
- csd->write_misalign = 0;
|
|
|
- csd->read_misalign = 0;
|
|
|
- csd->r2w_factor = 4; /* Unused */
|
|
|
- csd->write_blkbits = 9;
|
|
|
- csd->write_partial = 0;
|
|
|
- break;
|
|
|
- default:
|
|
|
- printk("%s: unrecognised CSD structure version %d\n",
|
|
|
- mmc_hostname(card->host), csd_struct);
|
|
|
- mmc_card_set_bad(card);
|
|
|
- return;
|
|
|
- }
|
|
|
- } else {
|
|
|
- /*
|
|
|
- * We only understand CSD structure v1.1 and v1.2.
|
|
|
- * v1.2 has extra information in bits 15, 11 and 10.
|
|
|
- */
|
|
|
- csd_struct = UNSTUFF_BITS(resp, 126, 2);
|
|
|
- if (csd_struct != 1 && csd_struct != 2) {
|
|
|
- printk("%s: unrecognised CSD structure version %d\n",
|
|
|
- mmc_hostname(card->host), csd_struct);
|
|
|
- mmc_card_set_bad(card);
|
|
|
- return;
|
|
|
- }
|
|
|
-
|
|
|
- csd->mmca_vsn = UNSTUFF_BITS(resp, 122, 4);
|
|
|
- m = UNSTUFF_BITS(resp, 115, 4);
|
|
|
- e = UNSTUFF_BITS(resp, 112, 3);
|
|
|
- csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10;
|
|
|
- csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100;
|
|
|
-
|
|
|
- m = UNSTUFF_BITS(resp, 99, 4);
|
|
|
- e = UNSTUFF_BITS(resp, 96, 3);
|
|
|
- csd->max_dtr = tran_exp[e] * tran_mant[m];
|
|
|
- csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
|
|
|
-
|
|
|
- e = UNSTUFF_BITS(resp, 47, 3);
|
|
|
- m = UNSTUFF_BITS(resp, 62, 12);
|
|
|
- csd->capacity = (1 + m) << (e + 2);
|
|
|
-
|
|
|
- csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4);
|
|
|
- csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
|
|
|
- csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
|
|
|
- csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
|
|
|
- csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
|
|
|
- csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
|
|
|
- csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Given a 64-bit response, decode to our card SCR structure.
|
|
|
- */
|
|
|
-static void mmc_decode_scr(struct mmc_card *card)
|
|
|
-{
|
|
|
- struct sd_scr *scr = &card->scr;
|
|
|
- unsigned int scr_struct;
|
|
|
- u32 resp[4];
|
|
|
-
|
|
|
- BUG_ON(!mmc_card_sd(card));
|
|
|
-
|
|
|
- resp[3] = card->raw_scr[1];
|
|
|
- resp[2] = card->raw_scr[0];
|
|
|
-
|
|
|
- scr_struct = UNSTUFF_BITS(resp, 60, 4);
|
|
|
- if (scr_struct != 0) {
|
|
|
- printk("%s: unrecognised SCR structure version %d\n",
|
|
|
- mmc_hostname(card->host), scr_struct);
|
|
|
- mmc_card_set_bad(card);
|
|
|
- return;
|
|
|
- }
|
|
|
-
|
|
|
- scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4);
|
|
|
- scr->bus_widths = UNSTUFF_BITS(resp, 48, 4);
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Locate a MMC card on this MMC host given a raw CID.
|
|
|
- */
|
|
|
-static struct mmc_card *mmc_find_card(struct mmc_host *host, u32 *raw_cid)
|
|
|
-{
|
|
|
- struct mmc_card *card;
|
|
|
-
|
|
|
- list_for_each_entry(card, &host->cards, node) {
|
|
|
- if (memcmp(card->raw_cid, raw_cid, sizeof(card->raw_cid)) == 0)
|
|
|
- return card;
|
|
|
- }
|
|
|
- return NULL;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Allocate a new MMC card, and assign a unique RCA.
|
|
|
- */
|
|
|
-static struct mmc_card *
|
|
|
-mmc_alloc_card(struct mmc_host *host, u32 *raw_cid, unsigned int *frca)
|
|
|
-{
|
|
|
- struct mmc_card *card, *c;
|
|
|
- unsigned int rca = *frca;
|
|
|
-
|
|
|
- card = kmalloc(sizeof(struct mmc_card), GFP_KERNEL);
|
|
|
- if (!card)
|
|
|
- return ERR_PTR(-ENOMEM);
|
|
|
-
|
|
|
- mmc_init_card(card, host);
|
|
|
- memcpy(card->raw_cid, raw_cid, sizeof(card->raw_cid));
|
|
|
-
|
|
|
- again:
|
|
|
- list_for_each_entry(c, &host->cards, node)
|
|
|
- if (c->rca == rca) {
|
|
|
- rca++;
|
|
|
- goto again;
|
|
|
- }
|
|
|
-
|
|
|
- card->rca = rca;
|
|
|
-
|
|
|
- *frca = rca;
|
|
|
-
|
|
|
- return card;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Tell attached cards to go to IDLE state
|
|
|
- */
|
|
|
-static void mmc_idle_cards(struct mmc_host *host)
|
|
|
-{
|
|
|
- struct mmc_command cmd;
|
|
|
-
|
|
|
- host->ios.chip_select = MMC_CS_HIGH;
|
|
|
- mmc_set_ios(host);
|
|
|
-
|
|
|
- mmc_delay(1);
|
|
|
-
|
|
|
- cmd.opcode = MMC_GO_IDLE_STATE;
|
|
|
- cmd.arg = 0;
|
|
|
- cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
|
|
|
-
|
|
|
- mmc_wait_for_cmd(host, &cmd, 0);
|
|
|
-
|
|
|
- mmc_delay(1);
|
|
|
-
|
|
|
- host->ios.chip_select = MMC_CS_DONTCARE;
|
|
|
- mmc_set_ios(host);
|
|
|
-
|
|
|
- mmc_delay(1);
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Apply power to the MMC stack. This is a two-stage process.
|
|
|
- * First, we enable power to the card without the clock running.
|
|
|
- * We then wait a bit for the power to stabilise. Finally,
|
|
|
- * enable the bus drivers and clock to the card.
|
|
|
- *
|
|
|
- * We must _NOT_ enable the clock prior to power stablising.
|
|
|
- *
|
|
|
- * If a host does all the power sequencing itself, ignore the
|
|
|
- * initial MMC_POWER_UP stage.
|
|
|
- */
|
|
|
-static void mmc_power_up(struct mmc_host *host)
|
|
|
-{
|
|
|
- int bit = fls(host->ocr_avail) - 1;
|
|
|
-
|
|
|
- host->ios.vdd = bit;
|
|
|
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
|
|
|
- host->ios.chip_select = MMC_CS_DONTCARE;
|
|
|
- host->ios.power_mode = MMC_POWER_UP;
|
|
|
- host->ios.bus_width = MMC_BUS_WIDTH_1;
|
|
|
- host->ios.timing = MMC_TIMING_LEGACY;
|
|
|
- mmc_set_ios(host);
|
|
|
-
|
|
|
- mmc_delay(1);
|
|
|
-
|
|
|
- host->ios.clock = host->f_min;
|
|
|
- host->ios.power_mode = MMC_POWER_ON;
|
|
|
- mmc_set_ios(host);
|
|
|
-
|
|
|
- mmc_delay(2);
|
|
|
-}
|
|
|
-
|
|
|
-static void mmc_power_off(struct mmc_host *host)
|
|
|
-{
|
|
|
- host->ios.clock = 0;
|
|
|
- host->ios.vdd = 0;
|
|
|
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
|
|
|
- host->ios.chip_select = MMC_CS_DONTCARE;
|
|
|
- host->ios.power_mode = MMC_POWER_OFF;
|
|
|
- host->ios.bus_width = MMC_BUS_WIDTH_1;
|
|
|
- host->ios.timing = MMC_TIMING_LEGACY;
|
|
|
- mmc_set_ios(host);
|
|
|
-}
|
|
|
-
|
|
|
-static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
|
|
|
-{
|
|
|
- struct mmc_command cmd;
|
|
|
- int i, err = 0;
|
|
|
-
|
|
|
- cmd.opcode = MMC_SEND_OP_COND;
|
|
|
- cmd.arg = ocr;
|
|
|
- cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
|
|
|
-
|
|
|
- for (i = 100; i; i--) {
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
|
- if (err != MMC_ERR_NONE)
|
|
|
- break;
|
|
|
-
|
|
|
- if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
|
|
|
- break;
|
|
|
-
|
|
|
- err = MMC_ERR_TIMEOUT;
|
|
|
-
|
|
|
- mmc_delay(10);
|
|
|
- }
|
|
|
-
|
|
|
- if (rocr)
|
|
|
- *rocr = cmd.resp[0];
|
|
|
-
|
|
|
- return err;
|
|
|
-}
|
|
|
-
|
|
|
-static int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
|
|
|
-{
|
|
|
- struct mmc_command cmd;
|
|
|
- int i, err = 0;
|
|
|
-
|
|
|
- cmd.opcode = SD_APP_OP_COND;
|
|
|
- cmd.arg = ocr;
|
|
|
- cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
|
|
|
-
|
|
|
- for (i = 100; i; i--) {
|
|
|
- err = mmc_wait_for_app_cmd(host, 0, &cmd, CMD_RETRIES);
|
|
|
- if (err != MMC_ERR_NONE)
|
|
|
- break;
|
|
|
-
|
|
|
- if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
|
|
|
- break;
|
|
|
-
|
|
|
- err = MMC_ERR_TIMEOUT;
|
|
|
-
|
|
|
- mmc_delay(10);
|
|
|
- }
|
|
|
-
|
|
|
- if (rocr)
|
|
|
- *rocr = cmd.resp[0];
|
|
|
-
|
|
|
- return err;
|
|
|
-}
|
|
|
-
|
|
|
-static int mmc_send_if_cond(struct mmc_host *host, u32 ocr, int *rsd2)
|
|
|
-{
|
|
|
- struct mmc_command cmd;
|
|
|
- int err, sd2;
|
|
|
- static const u8 test_pattern = 0xAA;
|
|
|
-
|
|
|
- /*
|
|
|
- * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
|
|
|
- * before SD_APP_OP_COND. This command will harmlessly fail for
|
|
|
- * SD 1.0 cards.
|
|
|
- */
|
|
|
- cmd.opcode = SD_SEND_IF_COND;
|
|
|
- cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
|
|
|
- cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
|
- if (err == MMC_ERR_NONE) {
|
|
|
- if ((cmd.resp[0] & 0xFF) == test_pattern) {
|
|
|
- sd2 = 1;
|
|
|
- } else {
|
|
|
- sd2 = 0;
|
|
|
- err = MMC_ERR_FAILED;
|
|
|
- }
|
|
|
- } else {
|
|
|
- /*
|
|
|
- * Treat errors as SD 1.0 card.
|
|
|
- */
|
|
|
- sd2 = 0;
|
|
|
- err = MMC_ERR_NONE;
|
|
|
- }
|
|
|
- if (rsd2)
|
|
|
- *rsd2 = sd2;
|
|
|
- return err;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Discover cards by requesting their CID. If this command
|
|
|
- * times out, it is not an error; there are no further cards
|
|
|
- * to be discovered. Add new cards to the list.
|
|
|
- *
|
|
|
- * Create a mmc_card entry for each discovered card, assigning
|
|
|
- * it an RCA, and save the raw CID for decoding later.
|
|
|
- */
|
|
|
-static void mmc_discover_cards(struct mmc_host *host)
|
|
|
-{
|
|
|
- struct mmc_card *card;
|
|
|
- unsigned int first_rca = 1, err;
|
|
|
-
|
|
|
- while (1) {
|
|
|
- struct mmc_command cmd;
|
|
|
-
|
|
|
- cmd.opcode = MMC_ALL_SEND_CID;
|
|
|
- cmd.arg = 0;
|
|
|
- cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
|
|
|
- if (err == MMC_ERR_TIMEOUT) {
|
|
|
- err = MMC_ERR_NONE;
|
|
|
- break;
|
|
|
- }
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- printk(KERN_ERR "%s: error requesting CID: %d\n",
|
|
|
- mmc_hostname(host), err);
|
|
|
- break;
|
|
|
- }
|
|
|
-
|
|
|
- card = mmc_find_card(host, cmd.resp);
|
|
|
- if (!card) {
|
|
|
- card = mmc_alloc_card(host, cmd.resp, &first_rca);
|
|
|
- if (IS_ERR(card)) {
|
|
|
- err = PTR_ERR(card);
|
|
|
- break;
|
|
|
- }
|
|
|
- list_add(&card->node, &host->cards);
|
|
|
- }
|
|
|
-
|
|
|
- card->state &= ~MMC_STATE_DEAD;
|
|
|
-
|
|
|
- if (host->mode == MMC_MODE_SD) {
|
|
|
- mmc_card_set_sd(card);
|
|
|
-
|
|
|
- cmd.opcode = SD_SEND_RELATIVE_ADDR;
|
|
|
- cmd.arg = 0;
|
|
|
- cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
|
|
|
- if (err != MMC_ERR_NONE)
|
|
|
- mmc_card_set_dead(card);
|
|
|
- else {
|
|
|
- card->rca = cmd.resp[0] >> 16;
|
|
|
-
|
|
|
- if (!host->ops->get_ro) {
|
|
|
- printk(KERN_WARNING "%s: host does not "
|
|
|
- "support reading read-only "
|
|
|
- "switch. assuming write-enable.\n",
|
|
|
- mmc_hostname(host));
|
|
|
- } else {
|
|
|
- if (host->ops->get_ro(host))
|
|
|
- mmc_card_set_readonly(card);
|
|
|
- }
|
|
|
- }
|
|
|
- } else {
|
|
|
- cmd.opcode = MMC_SET_RELATIVE_ADDR;
|
|
|
- cmd.arg = card->rca << 16;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
|
|
|
- if (err != MMC_ERR_NONE)
|
|
|
- mmc_card_set_dead(card);
|
|
|
- }
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-static void mmc_read_csds(struct mmc_host *host)
|
|
|
-{
|
|
|
- struct mmc_card *card;
|
|
|
-
|
|
|
- list_for_each_entry(card, &host->cards, node) {
|
|
|
- struct mmc_command cmd;
|
|
|
- int err;
|
|
|
-
|
|
|
- if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT))
|
|
|
- continue;
|
|
|
-
|
|
|
- cmd.opcode = MMC_SEND_CSD;
|
|
|
- cmd.arg = card->rca << 16;
|
|
|
- cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- mmc_card_set_dead(card);
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- memcpy(card->raw_csd, cmd.resp, sizeof(card->raw_csd));
|
|
|
-
|
|
|
- mmc_decode_csd(card);
|
|
|
- mmc_decode_cid(card);
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-static void mmc_process_ext_csds(struct mmc_host *host)
|
|
|
-{
|
|
|
- int err;
|
|
|
- struct mmc_card *card;
|
|
|
-
|
|
|
- struct mmc_request mrq;
|
|
|
- struct mmc_command cmd;
|
|
|
- struct mmc_data data;
|
|
|
-
|
|
|
- struct scatterlist sg;
|
|
|
-
|
|
|
- /*
|
|
|
- * As the ext_csd is so large and mostly unused, we don't store the
|
|
|
- * raw block in mmc_card.
|
|
|
- */
|
|
|
- u8 *ext_csd;
|
|
|
- ext_csd = kmalloc(512, GFP_KERNEL);
|
|
|
- if (!ext_csd) {
|
|
|
- printk("%s: could not allocate a buffer to receive the ext_csd."
|
|
|
- "mmc v4 cards will be treated as v3.\n",
|
|
|
- mmc_hostname(host));
|
|
|
- return;
|
|
|
- }
|
|
|
-
|
|
|
- list_for_each_entry(card, &host->cards, node) {
|
|
|
- if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT))
|
|
|
- continue;
|
|
|
- if (mmc_card_sd(card))
|
|
|
- continue;
|
|
|
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
|
|
|
- continue;
|
|
|
-
|
|
|
- err = mmc_select_card(host, card);
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- mmc_card_set_dead(card);
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
-
|
|
|
- cmd.opcode = MMC_SEND_EXT_CSD;
|
|
|
- cmd.arg = 0;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
|
-
|
|
|
- memset(&data, 0, sizeof(struct mmc_data));
|
|
|
-
|
|
|
- mmc_set_data_timeout(&data, card, 0);
|
|
|
-
|
|
|
- data.blksz = 512;
|
|
|
- data.blocks = 1;
|
|
|
- data.flags = MMC_DATA_READ;
|
|
|
- data.sg = &sg;
|
|
|
- data.sg_len = 1;
|
|
|
-
|
|
|
- memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
-
|
|
|
- mrq.cmd = &cmd;
|
|
|
- mrq.data = &data;
|
|
|
-
|
|
|
- sg_init_one(&sg, ext_csd, 512);
|
|
|
-
|
|
|
- mmc_wait_for_req(host, &mrq);
|
|
|
-
|
|
|
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
|
|
|
- printk("%s: unable to read EXT_CSD, performance "
|
|
|
- "might suffer.\n", mmc_hostname(card->host));
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- switch (ext_csd[EXT_CSD_CARD_TYPE]) {
|
|
|
- case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
|
|
|
- card->ext_csd.hs_max_dtr = 52000000;
|
|
|
- break;
|
|
|
- case EXT_CSD_CARD_TYPE_26:
|
|
|
- card->ext_csd.hs_max_dtr = 26000000;
|
|
|
- break;
|
|
|
- default:
|
|
|
- /* MMC v4 spec says this cannot happen */
|
|
|
- printk("%s: card is mmc v4 but doesn't support "
|
|
|
- "any high-speed modes.\n",
|
|
|
- mmc_hostname(card->host));
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- if (host->caps & MMC_CAP_MMC_HIGHSPEED) {
|
|
|
- /* Activate highspeed support. */
|
|
|
- cmd.opcode = MMC_SWITCH;
|
|
|
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
|
|
|
- (EXT_CSD_HS_TIMING << 16) |
|
|
|
- (1 << 8) |
|
|
|
- EXT_CSD_CMD_SET_NORMAL;
|
|
|
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- printk("%s: failed to switch card to mmc v4 "
|
|
|
- "high-speed mode.\n",
|
|
|
- mmc_hostname(card->host));
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- mmc_card_set_highspeed(card);
|
|
|
-
|
|
|
- host->ios.timing = MMC_TIMING_SD_HS;
|
|
|
- mmc_set_ios(host);
|
|
|
- }
|
|
|
-
|
|
|
- /* Check for host support for wide-bus modes. */
|
|
|
- if (host->caps & MMC_CAP_4_BIT_DATA) {
|
|
|
- /* Activate 4-bit support. */
|
|
|
- cmd.opcode = MMC_SWITCH;
|
|
|
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
|
|
|
- (EXT_CSD_BUS_WIDTH << 16) |
|
|
|
- (EXT_CSD_BUS_WIDTH_4 << 8) |
|
|
|
- EXT_CSD_CMD_SET_NORMAL;
|
|
|
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- printk("%s: failed to switch card to "
|
|
|
- "mmc v4 4-bit bus mode.\n",
|
|
|
- mmc_hostname(card->host));
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- host->ios.bus_width = MMC_BUS_WIDTH_4;
|
|
|
- mmc_set_ios(host);
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- kfree(ext_csd);
|
|
|
-
|
|
|
- mmc_deselect_cards(host);
|
|
|
-}
|
|
|
-
|
|
|
-static void mmc_read_scrs(struct mmc_host *host)
|
|
|
-{
|
|
|
- int err;
|
|
|
- struct mmc_card *card;
|
|
|
- struct mmc_request mrq;
|
|
|
- struct mmc_command cmd;
|
|
|
- struct mmc_data data;
|
|
|
- struct scatterlist sg;
|
|
|
-
|
|
|
- list_for_each_entry(card, &host->cards, node) {
|
|
|
- if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT))
|
|
|
- continue;
|
|
|
- if (!mmc_card_sd(card))
|
|
|
- continue;
|
|
|
-
|
|
|
- err = mmc_select_card(host, card);
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- mmc_card_set_dead(card);
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
-
|
|
|
- cmd.opcode = MMC_APP_CMD;
|
|
|
- cmd.arg = card->rca << 16;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
|
- if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) {
|
|
|
- mmc_card_set_dead(card);
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
-
|
|
|
- cmd.opcode = SD_APP_SEND_SCR;
|
|
|
- cmd.arg = 0;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
|
-
|
|
|
- memset(&data, 0, sizeof(struct mmc_data));
|
|
|
-
|
|
|
- mmc_set_data_timeout(&data, card, 0);
|
|
|
-
|
|
|
- data.blksz = 1 << 3;
|
|
|
- data.blocks = 1;
|
|
|
- data.flags = MMC_DATA_READ;
|
|
|
- data.sg = &sg;
|
|
|
- data.sg_len = 1;
|
|
|
-
|
|
|
- memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
-
|
|
|
- mrq.cmd = &cmd;
|
|
|
- mrq.data = &data;
|
|
|
-
|
|
|
- sg_init_one(&sg, (u8*)card->raw_scr, 8);
|
|
|
-
|
|
|
- mmc_wait_for_req(host, &mrq);
|
|
|
-
|
|
|
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
|
|
|
- mmc_card_set_dead(card);
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- card->raw_scr[0] = ntohl(card->raw_scr[0]);
|
|
|
- card->raw_scr[1] = ntohl(card->raw_scr[1]);
|
|
|
-
|
|
|
- mmc_decode_scr(card);
|
|
|
- }
|
|
|
-
|
|
|
- mmc_deselect_cards(host);
|
|
|
-}
|
|
|
-
|
|
|
-static void mmc_read_switch_caps(struct mmc_host *host)
|
|
|
-{
|
|
|
- int err;
|
|
|
- struct mmc_card *card;
|
|
|
- struct mmc_request mrq;
|
|
|
- struct mmc_command cmd;
|
|
|
- struct mmc_data data;
|
|
|
- unsigned char *status;
|
|
|
- struct scatterlist sg;
|
|
|
-
|
|
|
- if (!(host->caps & MMC_CAP_SD_HIGHSPEED))
|
|
|
- return;
|
|
|
-
|
|
|
- status = kmalloc(64, GFP_KERNEL);
|
|
|
- if (!status) {
|
|
|
- printk(KERN_WARNING "%s: Unable to allocate buffer for "
|
|
|
- "reading switch capabilities.\n",
|
|
|
- mmc_hostname(host));
|
|
|
- return;
|
|
|
- }
|
|
|
-
|
|
|
- list_for_each_entry(card, &host->cards, node) {
|
|
|
- if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT))
|
|
|
- continue;
|
|
|
- if (!mmc_card_sd(card))
|
|
|
- continue;
|
|
|
- if (card->scr.sda_vsn < SCR_SPEC_VER_1)
|
|
|
- continue;
|
|
|
-
|
|
|
- err = mmc_select_card(host, card);
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- mmc_card_set_dead(card);
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
-
|
|
|
- cmd.opcode = SD_SWITCH;
|
|
|
- cmd.arg = 0x00FFFFF1;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
|
-
|
|
|
- memset(&data, 0, sizeof(struct mmc_data));
|
|
|
-
|
|
|
- mmc_set_data_timeout(&data, card, 0);
|
|
|
-
|
|
|
- data.blksz = 64;
|
|
|
- data.blocks = 1;
|
|
|
- data.flags = MMC_DATA_READ;
|
|
|
- data.sg = &sg;
|
|
|
- data.sg_len = 1;
|
|
|
-
|
|
|
- memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
-
|
|
|
- mrq.cmd = &cmd;
|
|
|
- mrq.data = &data;
|
|
|
-
|
|
|
- sg_init_one(&sg, status, 64);
|
|
|
-
|
|
|
- mmc_wait_for_req(host, &mrq);
|
|
|
-
|
|
|
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
|
|
|
- printk("%s: unable to read switch capabilities, "
|
|
|
- "performance might suffer.\n",
|
|
|
- mmc_hostname(card->host));
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- if (status[13] & 0x02)
|
|
|
- card->sw_caps.hs_max_dtr = 50000000;
|
|
|
-
|
|
|
- memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
-
|
|
|
- cmd.opcode = SD_SWITCH;
|
|
|
- cmd.arg = 0x80FFFFF1;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
|
-
|
|
|
- memset(&data, 0, sizeof(struct mmc_data));
|
|
|
-
|
|
|
- mmc_set_data_timeout(&data, card, 0);
|
|
|
-
|
|
|
- data.blksz = 64;
|
|
|
- data.blocks = 1;
|
|
|
- data.flags = MMC_DATA_READ;
|
|
|
- data.sg = &sg;
|
|
|
- data.sg_len = 1;
|
|
|
-
|
|
|
- memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
-
|
|
|
- mrq.cmd = &cmd;
|
|
|
- mrq.data = &data;
|
|
|
-
|
|
|
- sg_init_one(&sg, status, 64);
|
|
|
-
|
|
|
- mmc_wait_for_req(host, &mrq);
|
|
|
-
|
|
|
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE ||
|
|
|
- (status[16] & 0xF) != 1) {
|
|
|
- printk(KERN_WARNING "%s: Problem switching card "
|
|
|
- "into high-speed mode!\n",
|
|
|
- mmc_hostname(host));
|
|
|
- continue;
|
|
|
- }
|
|
|
-
|
|
|
- mmc_card_set_highspeed(card);
|
|
|
-
|
|
|
- host->ios.timing = MMC_TIMING_SD_HS;
|
|
|
- mmc_set_ios(host);
|
|
|
- }
|
|
|
-
|
|
|
- kfree(status);
|
|
|
-
|
|
|
- mmc_deselect_cards(host);
|
|
|
-}
|
|
|
-
|
|
|
-static unsigned int mmc_calculate_clock(struct mmc_host *host)
|
|
|
-{
|
|
|
- struct mmc_card *card;
|
|
|
- unsigned int max_dtr = host->f_max;
|
|
|
-
|
|
|
- list_for_each_entry(card, &host->cards, node)
|
|
|
- if (!mmc_card_dead(card)) {
|
|
|
- if (mmc_card_highspeed(card) && mmc_card_sd(card)) {
|
|
|
- if (max_dtr > card->sw_caps.hs_max_dtr)
|
|
|
- max_dtr = card->sw_caps.hs_max_dtr;
|
|
|
- } else if (mmc_card_highspeed(card) && !mmc_card_sd(card)) {
|
|
|
- if (max_dtr > card->ext_csd.hs_max_dtr)
|
|
|
- max_dtr = card->ext_csd.hs_max_dtr;
|
|
|
- } else if (max_dtr > card->csd.max_dtr) {
|
|
|
- max_dtr = card->csd.max_dtr;
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- pr_debug("%s: selected %d.%03dMHz transfer rate\n",
|
|
|
- mmc_hostname(host),
|
|
|
- max_dtr / 1000000, (max_dtr / 1000) % 1000);
|
|
|
-
|
|
|
- return max_dtr;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Check whether cards we already know about are still present.
|
|
|
- * We do this by requesting status, and checking whether a card
|
|
|
- * responds.
|
|
|
- *
|
|
|
- * A request for status does not cause a state change in data
|
|
|
- * transfer mode.
|
|
|
- */
|
|
|
-static void mmc_check_cards(struct mmc_host *host)
|
|
|
-{
|
|
|
- struct list_head *l, *n;
|
|
|
-
|
|
|
- mmc_deselect_cards(host);
|
|
|
-
|
|
|
- list_for_each_safe(l, n, &host->cards) {
|
|
|
- struct mmc_card *card = mmc_list_to_card(l);
|
|
|
- struct mmc_command cmd;
|
|
|
- int err;
|
|
|
-
|
|
|
- cmd.opcode = MMC_SEND_STATUS;
|
|
|
- cmd.arg = card->rca << 16;
|
|
|
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
-
|
|
|
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
|
|
|
- if (err == MMC_ERR_NONE)
|
|
|
- continue;
|
|
|
-
|
|
|
- mmc_card_set_dead(card);
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-static void mmc_setup(struct mmc_host *host)
|
|
|
-{
|
|
|
- if (host->ios.power_mode != MMC_POWER_ON) {
|
|
|
- int err;
|
|
|
- u32 ocr;
|
|
|
-
|
|
|
- host->mode = MMC_MODE_SD;
|
|
|
-
|
|
|
- mmc_power_up(host);
|
|
|
- mmc_idle_cards(host);
|
|
|
-
|
|
|
- err = mmc_send_if_cond(host, host->ocr_avail, NULL);
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- return;
|
|
|
- }
|
|
|
- err = mmc_send_app_op_cond(host, 0, &ocr);
|
|
|
-
|
|
|
- /*
|
|
|
- * If we fail to detect any SD cards then try
|
|
|
- * searching for MMC cards.
|
|
|
- */
|
|
|
- if (err != MMC_ERR_NONE) {
|
|
|
- host->mode = MMC_MODE_MMC;
|
|
|
-
|
|
|
- err = mmc_send_op_cond(host, 0, &ocr);
|
|
|
- if (err != MMC_ERR_NONE)
|
|
|
- return;
|
|
|
- }
|
|
|
-
|
|
|
- host->ocr = mmc_select_voltage(host, ocr);
|
|
|
-
|
|
|
- /*
|
|
|
- * Since we're changing the OCR value, we seem to
|
|
|
- * need to tell some cards to go back to the idle
|
|
|
- * state. We wait 1ms to give cards time to
|
|
|
- * respond.
|
|
|
- */
|
|
|
- if (host->ocr)
|
|
|
- mmc_idle_cards(host);
|
|
|
- } else {
|
|
|
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
|
|
|
- host->ios.clock = host->f_min;
|
|
|
- mmc_set_ios(host);
|
|
|
-
|
|
|
- /*
|
|
|
- * We should remember the OCR mask from the existing
|
|
|
- * cards, and detect the new cards OCR mask, combine
|
|
|
- * the two and re-select the VDD. However, if we do
|
|
|
- * change VDD, we should do an idle, and then do a
|
|
|
- * full re-initialisation. We would need to notify
|
|
|
- * drivers so that they can re-setup the cards as
|
|
|
- * well, while keeping their queues at bay.
|
|
|
- *
|
|
|
- * For the moment, we take the easy way out - if the
|
|
|
- * new cards don't like our currently selected VDD,
|
|
|
- * they drop off the bus.
|
|
|
- */
|
|
|
- }
|
|
|
-
|
|
|
- if (host->ocr == 0)
|
|
|
- return;
|
|
|
-
|
|
|
- /*
|
|
|
- * Send the selected OCR multiple times... until the cards
|
|
|
- * all get the idea that they should be ready for CMD2.
|
|
|
- * (My SanDisk card seems to need this.)
|
|
|
- */
|
|
|
- if (host->mode == MMC_MODE_SD) {
|
|
|
- int err, sd2;
|
|
|
- err = mmc_send_if_cond(host, host->ocr, &sd2);
|
|
|
- if (err == MMC_ERR_NONE) {
|
|
|
- /*
|
|
|
- * If SD_SEND_IF_COND indicates an SD 2.0
|
|
|
- * compliant card and we should set bit 30
|
|
|
- * of the ocr to indicate that we can handle
|
|
|
- * block-addressed SDHC cards.
|
|
|
- */
|
|
|
- mmc_send_app_op_cond(host, host->ocr | (sd2 << 30), NULL);
|
|
|
- }
|
|
|
- } else {
|
|
|
- mmc_send_op_cond(host, host->ocr, NULL);
|
|
|
- }
|
|
|
-
|
|
|
- mmc_discover_cards(host);
|
|
|
-
|
|
|
- /*
|
|
|
- * Ok, now switch to push-pull mode.
|
|
|
- */
|
|
|
- host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
|
|
|
- mmc_set_ios(host);
|
|
|
-
|
|
|
- mmc_read_csds(host);
|
|
|
-
|
|
|
- if (host->mode == MMC_MODE_SD) {
|
|
|
- mmc_read_scrs(host);
|
|
|
- mmc_read_switch_caps(host);
|
|
|
- } else
|
|
|
- mmc_process_ext_csds(host);
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_detect_change - process change of state on a MMC socket
|
|
|
- * @host: host which changed state.
|
|
|
- * @delay: optional delay to wait before detection (jiffies)
|
|
|
- *
|
|
|
- * All we know is that card(s) have been inserted or removed
|
|
|
- * from the socket(s). We don't know which socket or cards.
|
|
|
- */
|
|
|
-void mmc_detect_change(struct mmc_host *host, unsigned long delay)
|
|
|
-{
|
|
|
- mmc_schedule_delayed_work(&host->detect, delay);
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_detect_change);
|
|
|
-
|
|
|
-
|
|
|
-static void mmc_rescan(struct work_struct *work)
|
|
|
-{
|
|
|
- struct mmc_host *host =
|
|
|
- container_of(work, struct mmc_host, detect.work);
|
|
|
- struct list_head *l, *n;
|
|
|
- unsigned char power_mode;
|
|
|
-
|
|
|
- mmc_claim_host(host);
|
|
|
-
|
|
|
- /*
|
|
|
- * Check for removed cards and newly inserted ones. We check for
|
|
|
- * removed cards first so we can intelligently re-select the VDD.
|
|
|
- */
|
|
|
- power_mode = host->ios.power_mode;
|
|
|
- if (power_mode == MMC_POWER_ON)
|
|
|
- mmc_check_cards(host);
|
|
|
-
|
|
|
- mmc_setup(host);
|
|
|
-
|
|
|
- /*
|
|
|
- * Some broken cards process CMD1 even in stand-by state. There is
|
|
|
- * no reply, but an ILLEGAL_COMMAND error is cached and returned
|
|
|
- * after next command. We poll for card status here to clear any
|
|
|
- * possibly pending error.
|
|
|
- */
|
|
|
- if (power_mode == MMC_POWER_ON)
|
|
|
- mmc_check_cards(host);
|
|
|
-
|
|
|
- if (!list_empty(&host->cards)) {
|
|
|
- /*
|
|
|
- * (Re-)calculate the fastest clock rate which the
|
|
|
- * attached cards and the host support.
|
|
|
- */
|
|
|
- host->ios.clock = mmc_calculate_clock(host);
|
|
|
- mmc_set_ios(host);
|
|
|
- }
|
|
|
-
|
|
|
- mmc_release_host(host);
|
|
|
-
|
|
|
- list_for_each_safe(l, n, &host->cards) {
|
|
|
- struct mmc_card *card = mmc_list_to_card(l);
|
|
|
-
|
|
|
- /*
|
|
|
- * If this is a new and good card, register it.
|
|
|
- */
|
|
|
- if (!mmc_card_present(card) && !mmc_card_dead(card)) {
|
|
|
- if (mmc_register_card(card))
|
|
|
- mmc_card_set_dead(card);
|
|
|
- else
|
|
|
- mmc_card_set_present(card);
|
|
|
- }
|
|
|
-
|
|
|
- /*
|
|
|
- * If this card is dead, destroy it.
|
|
|
- */
|
|
|
- if (mmc_card_dead(card)) {
|
|
|
- list_del(&card->node);
|
|
|
- mmc_remove_card(card);
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- /*
|
|
|
- * If we discover that there are no cards on the
|
|
|
- * bus, turn off the clock and power down.
|
|
|
- */
|
|
|
- if (list_empty(&host->cards))
|
|
|
- mmc_power_off(host);
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_alloc_host - initialise the per-host structure.
|
|
|
- * @extra: sizeof private data structure
|
|
|
- * @dev: pointer to host device model structure
|
|
|
- *
|
|
|
- * Initialise the per-host structure.
|
|
|
- */
|
|
|
-struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
|
|
|
-{
|
|
|
- struct mmc_host *host;
|
|
|
-
|
|
|
- host = mmc_alloc_host_sysfs(extra, dev);
|
|
|
- if (host) {
|
|
|
- spin_lock_init(&host->lock);
|
|
|
- init_waitqueue_head(&host->wq);
|
|
|
- INIT_LIST_HEAD(&host->cards);
|
|
|
- INIT_DELAYED_WORK(&host->detect, mmc_rescan);
|
|
|
-
|
|
|
- /*
|
|
|
- * By default, hosts do not support SGIO or large requests.
|
|
|
- * They have to set these according to their abilities.
|
|
|
- */
|
|
|
- host->max_hw_segs = 1;
|
|
|
- host->max_phys_segs = 1;
|
|
|
- host->max_seg_size = PAGE_CACHE_SIZE;
|
|
|
-
|
|
|
- host->max_req_size = PAGE_CACHE_SIZE;
|
|
|
- host->max_blk_size = 512;
|
|
|
- host->max_blk_count = PAGE_CACHE_SIZE / 512;
|
|
|
- }
|
|
|
-
|
|
|
- return host;
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_alloc_host);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_add_host - initialise host hardware
|
|
|
- * @host: mmc host
|
|
|
- */
|
|
|
-int mmc_add_host(struct mmc_host *host)
|
|
|
-{
|
|
|
- int ret;
|
|
|
-
|
|
|
- ret = mmc_add_host_sysfs(host);
|
|
|
- if (ret == 0) {
|
|
|
- mmc_power_off(host);
|
|
|
- mmc_detect_change(host, 0);
|
|
|
- }
|
|
|
-
|
|
|
- return ret;
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_add_host);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_remove_host - remove host hardware
|
|
|
- * @host: mmc host
|
|
|
- *
|
|
|
- * Unregister and remove all cards associated with this host,
|
|
|
- * and power down the MMC bus.
|
|
|
- */
|
|
|
-void mmc_remove_host(struct mmc_host *host)
|
|
|
-{
|
|
|
- struct list_head *l, *n;
|
|
|
-
|
|
|
- list_for_each_safe(l, n, &host->cards) {
|
|
|
- struct mmc_card *card = mmc_list_to_card(l);
|
|
|
-
|
|
|
- mmc_remove_card(card);
|
|
|
- }
|
|
|
-
|
|
|
- mmc_power_off(host);
|
|
|
- mmc_remove_host_sysfs(host);
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_remove_host);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_free_host - free the host structure
|
|
|
- * @host: mmc host
|
|
|
- *
|
|
|
- * Free the host once all references to it have been dropped.
|
|
|
- */
|
|
|
-void mmc_free_host(struct mmc_host *host)
|
|
|
-{
|
|
|
- mmc_flush_scheduled_work();
|
|
|
- mmc_free_host_sysfs(host);
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_free_host);
|
|
|
-
|
|
|
-#ifdef CONFIG_PM
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_suspend_host - suspend a host
|
|
|
- * @host: mmc host
|
|
|
- * @state: suspend mode (PM_SUSPEND_xxx)
|
|
|
- */
|
|
|
-int mmc_suspend_host(struct mmc_host *host, pm_message_t state)
|
|
|
-{
|
|
|
- mmc_claim_host(host);
|
|
|
- mmc_deselect_cards(host);
|
|
|
- mmc_power_off(host);
|
|
|
- mmc_release_host(host);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_suspend_host);
|
|
|
-
|
|
|
-/**
|
|
|
- * mmc_resume_host - resume a previously suspended host
|
|
|
- * @host: mmc host
|
|
|
- */
|
|
|
-int mmc_resume_host(struct mmc_host *host)
|
|
|
-{
|
|
|
- mmc_rescan(&host->detect.work);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-EXPORT_SYMBOL(mmc_resume_host);
|
|
|
-
|
|
|
-#endif
|
|
|
-
|
|
|
-MODULE_LICENSE("GPL");
|