amd64_edac: add F10h-and-later methods-p2

Borislav:

- fix a wrong negation in f10_determine_base_addr_offset()
- fix a wrong mask in f10_determine_base_addr_offset() which should
select DctSelBaseAddr[31:11] and not [31:16] as it was before
- remove StinkyIdentifiers, trivially simplify code.
- fix/cleanup comments
- fix function return value patterns

Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

drivers/edac/amd64_edac.c

@@ -1367,3 +1367,199 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	pvt->dram_limit[dram] =
 		((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
 }
+
+static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
+{
+	int err = 0;
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_LOW,
+				    &pvt->dram_ctl_select_low);
+	if (err) {
+		debugf0("Reading F10_DCTL_SEL_LOW failed\n");
+	} else {
+		debugf0("DRAM_DCTL_SEL_LOW=0x%x  DctSelBaseAddr=0x%x\n",
+			pvt->dram_ctl_select_low, dct_sel_baseaddr(pvt));
+
+		debugf0("  DRAM DCTs are=%s DRAM Is=%s DRAM-Ctl-"
+				"sel-hi-range=%s\n",
+			(dct_ganging_enabled(pvt) ? "GANGED" : "NOT GANGED"),
+			(dct_dram_enabled(pvt) ? "Enabled"   : "Disabled"),
+			(dct_high_range_enabled(pvt) ? "Enabled" : "Disabled"));
+
+		debugf0("  DctDatIntLv=%s MemCleared=%s DctSelIntLvAddr=0x%x\n",
+			(dct_data_intlv_enabled(pvt) ? "Enabled" : "Disabled"),
+			(dct_memory_cleared(pvt) ? "True " : "False "),
+			dct_sel_interleave_addr(pvt));
+	}
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_HIGH,
+				    &pvt->dram_ctl_select_high);
+	if (err)
+		debugf0("Reading F10_DCTL_SEL_HIGH failed\n");
+}
+
+static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
+				int hi_range_sel, u32 intlv_en)
+{
+	u32 cs, temp, dct_sel_high = (pvt->dram_ctl_select_low >> 1) & 1;
+
+	if (dct_ganging_enabled(pvt))
+		cs = 0;
+	else if (hi_range_sel)
+		cs = dct_sel_high;
+	else if (dct_interleave_enabled(pvt)) {
+		if (dct_sel_interleave_addr(pvt) == 0)
+			cs = sys_addr >> 6 & 1;
+		else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) {
+			temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2;
+
+			if (dct_sel_interleave_addr(pvt) & 1)
+				cs = (sys_addr >> 9 & 1) ^ temp;
+			else
+				cs = (sys_addr >> 6 & 1) ^ temp;
+		} else if (intlv_en & 4)
+			cs = sys_addr >> 15 & 1;
+		else if (intlv_en & 2)
+			cs = sys_addr >> 14 & 1;
+		else if (intlv_en & 1)
+			cs = sys_addr >> 13 & 1;
+		else
+			cs = sys_addr >> 12 & 1;
+	} else if (dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt))
+		cs = ~dct_sel_high & 1;
+	else
+		cs = 0;
+
+	return cs;
+}
+
+static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en)
+{
+	if (intlv_en == 1)
+		return 1;
+	else if (intlv_en == 3)
+		return 2;
+	else if (intlv_en == 7)
+		return 3;
+
+	return 0;
+}
+
+static inline u64 f10_determine_base_addr_offset(u64 sys_addr, int hi_range_sel,
+						 u32 dct_sel_base_addr,
+						 u64 dct_sel_base_off,
+						 u32 hole_en, u32 hole_off,
+						 u64 dram_base)
+{
+	u64 chan_off;
+
+	if (hi_range_sel) {
+		if (!(dct_sel_base_addr & 0xFFFFF800) &&
+		   (hole_en & 1) && (sys_addr >= 0x100000000ULL))
+			chan_off = hole_off << 16;
+		else
+			chan_off = dct_sel_base_off;
+	} else {
+		if ((hole_en & 1) && (sys_addr >= 0x100000000ULL))
+			chan_off = hole_off << 16;
+		else
+			chan_off = dram_base & 0xFFFFF8000000ULL;
+	}
+
+	return (sys_addr & 0x0000FFFFFFFFFFC0ULL) -
+			(chan_off & 0x0000FFFFFF800000ULL);
+}
+
+/* Hack for the time being - Can we get this from BIOS?? */
+#define	CH0SPARE_RANK	0
+#define	CH1SPARE_RANK	1
+
+/*
+ * checks if the csrow passed in is marked as SPARED, if so returns the new
+ * spare row
+ */
+static inline int f10_process_possible_spare(int csrow,
+				u32 cs, struct amd64_pvt *pvt)
+{
+	u32 swap_done;
+	u32 bad_dram_cs;
+
+	/* Depending on channel, isolate respective SPARING info */
+	if (cs) {
+		swap_done = F10_ONLINE_SPARE_SWAPDONE1(pvt->online_spare);
+		bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS1(pvt->online_spare);
+		if (swap_done && (csrow == bad_dram_cs))
+			csrow = CH1SPARE_RANK;
+	} else {
+		swap_done = F10_ONLINE_SPARE_SWAPDONE0(pvt->online_spare);
+		bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS0(pvt->online_spare);
+		if (swap_done && (csrow == bad_dram_cs))
+			csrow = CH0SPARE_RANK;
+	}
+	return csrow;
+}
+
+/*
+ * Iterate over the DRAM DCT "base" and "mask" registers looking for a
+ * SystemAddr match on the specified 'ChannelSelect' and 'NodeID'
+ *
+ * Return:
+ *	-EINVAL:  NOT FOUND
+ *	0..csrow = Chip-Select Row
+ */
+static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
+{
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
+	u32 cs_base, cs_mask;
+	int cs_found = -EINVAL;
+	int csrow;
+
+	mci = mci_lookup[nid];
+	if (!mci)
+		return cs_found;
+
+	pvt = mci->pvt_info;
+
+	debugf1("InputAddr=0x%x  channelselect=%d\n", in_addr, cs);
+
+	for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+
+		cs_base = amd64_get_dct_base(pvt, cs, csrow);
+		if (!(cs_base & K8_DCSB_CS_ENABLE))
+			continue;
+
+		/*
+		 * We have an ENABLED CSROW, Isolate just the MASK bits of the
+		 * target: [28:19] and [13:5], which map to [36:27] and [21:13]
+		 * of the actual address.
+		 */
+		cs_base &= REV_F_F1Xh_DCSB_BASE_BITS;
+
+		/*
+		 * Get the DCT Mask, and ENABLE the reserved bits: [18:16] and
+		 * [4:0] to become ON. Then mask off bits [28:0] ([36:8])
+		 */
+		cs_mask = amd64_get_dct_mask(pvt, cs, csrow);
+
+		debugf1("    CSROW=%d CSBase=0x%x RAW CSMask=0x%x\n",
+				csrow, cs_base, cs_mask);
+
+		cs_mask = (cs_mask | 0x0007C01F) & 0x1FFFFFFF;
+
+		debugf1("              Final CSMask=0x%x\n", cs_mask);
+		debugf1("    (InputAddr & ~CSMask)=0x%x "
+				"(CSBase & ~CSMask)=0x%x\n",
+				(in_addr & ~cs_mask), (cs_base & ~cs_mask));
+
+		if ((in_addr & ~cs_mask) == (cs_base & ~cs_mask)) {
+			cs_found = f10_process_possible_spare(csrow, cs, pvt);
+
+			debugf1(" MATCH csrow=%d\n", cs_found);
+			break;
+		}
+	}
+	return cs_found;
+}
+
+