[ARM] 3954/1: AT91: Update drivers for new headers

This patch updates the drivers (and other files) which include the
hardware headers.  This fixes the breakage introduced in patches 3950/1
and 3951/1 (those patches were getting big).

The AVR32 architecture uses the same serial driver and had its own copy
of at91rm9200_pdc.h.  Renamed it to at91_pdc.h

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-at91rm9200/at91rm9200.c

@@ -15,8 +15,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_st.h>
 
-#include <asm/hardware.h>
 #include "generic.h"
 #include "clock.h"
 

arch/arm/mach-at91rm9200/at91rm9200_time.c

@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include <asm/mach/time.h>
 
+#include <asm/arch/at91_st.h>
+
 static unsigned long last_crtr;
 
 /*

arch/arm/mach-at91rm9200/clock.c

@@ -28,6 +28,7 @@
 #include <asm/mach-types.h>
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_pmc.h>
 
 #include "clock.h"
 

arch/arm/mach-at91rm9200/gpio.c

@@ -19,6 +19,8 @@
 
 #include <asm/io.h>
 #include <asm/hardware.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"

arch/arm/mach-at91rm9200/pm.c

@@ -26,6 +26,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91rm9200_mc.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"

drivers/char/watchdog/at91rm9200_wdt.c

@@ -21,6 +21,7 @@
 #include <linux/watchdog.h>
 #include <asm/bitops.h>
 #include <asm/uaccess.h>
+#include <asm/arch/at91_st.h>
 
 
 #define WDT_DEFAULT_TIME	5	/* seconds */

drivers/mmc/at91_mci.c

@@ -73,8 +73,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mci.h>
-#include <asm/arch/at91rm9200_pdc.h>
+#include <asm/arch/at91_mci.h>
+#include <asm/arch/at91_pdc.h>
 
 #define DRIVER_NAME "at91_mci"
 

drivers/pcmcia/at91_cf.c

@@ -23,9 +23,9 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <asm/arch/at91rm9200.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
 
 
 /*

drivers/serial/atmel_serial.c

@@ -36,9 +36,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/at91rm9200_pdc.h>
 #include <asm/mach/serial_at91.h>
 #include <asm/arch/board.h>
+#include <asm/arch/at91_pdc.h>
 #ifdef CONFIG_ARM
 #include <asm/arch/system.h>
 #include <asm/arch/gpio.h>

include/asm-arm/arch-at91rm9200/at91rm9200.h

@@ -79,6 +79,22 @@
 #define AT91_BASE_SYS		0xfffff000
 
 
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
+#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
+#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
+
+#define AT91_MATRIX	0	/* not supported */
+
 /*
  * Internal Memory.
  */

include/asm-arm/arch-at91rm9200/debug-macro.S

@@ -12,6 +12,7 @@
 */
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0

include/asm-arm/arch-at91rm9200/entry-macro.S

@@ -11,6 +11,7 @@
  */
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_aic.h>
 
 	.macro	disable_fiq
 	.endm

include/asm-arm/arch-at91rm9200/hardware.h

@@ -16,8 +16,16 @@
 
 #include <asm/sizes.h>
 
+#if defined(CONFIG_ARCH_AT91RM9200)
 #include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_sys.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+#include <asm/arch/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <asm/arch/at91sam9261.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
 
 /*
  * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF

include/asm-arm/arch-at91rm9200/irqs.h

@@ -21,6 +21,8 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
+#include <asm/arch/at91_aic.h>
+
 #define NR_AIC_IRQS 32
 
 

include/asm-arm/arch-at91rm9200/system.h

@@ -22,6 +22,8 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_st.h>
+#include <asm/arch/at91_dbgu.h>
 
 static inline void arch_idle(void)
 {

include/asm-arm/arch-at91rm9200/uncompress.h

@@ -22,11 +22,11 @@
 #define __ASM_ARCH_UNCOMPRESS_H
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
 
 /*
  * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
+ * initialized by the bootloader.  If you didn't setup a port in
  * your bootloader then nothing will appear (which might be desired).
  *
  * This does not append a newline

include/asm-avr32/arch-at32ap/at91rm9200_pdc.h → include/asm-avr32/arch-at32ap/at91_pdc.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
+ * include/asm-arm/arch-at91rm9200/at91_pdc.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
@@ -13,8 +13,8 @@
  * (at your option) any later version.
  */
 
-#ifndef AT91RM9200_PDC_H
-#define AT91RM9200_PDC_H
+#ifndef AT91_PDC_H
+#define AT91_PDC_H
 
 #define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
 #define AT91_PDC_RCR		0x104	/* Receive Counter Register */