[MIPS] Deforest the function pointer jungle in the time code.

Hard to follow who is pointing what to where and why so it's simply getting
in the way of the time code renovation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/au1000/common/setup.c

@@ -50,7 +50,6 @@ extern void au1000_halt(void);
 extern void au1000_power_off(void);
 extern void au1x_time_init(void);
 extern void au1x_timer_setup(struct irqaction *irq);
-extern void au1xxx_time_init(void);
 extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
@@ -112,7 +111,6 @@ void __init plat_mem_setup(void)
 	_machine_restart = au1000_restart;
 	_machine_halt = au1000_halt;
 	pm_power_off = au1000_power_off;
-	board_time_init = au1xxx_time_init;
 
 	/* IO/MEM resources. */
 	set_io_port_base(0);

arch/mips/au1000/common/time.c

@@ -329,7 +329,3 @@ void __init plat_timer_setup(struct irqaction *irq)
 
 #endif
 }
-
-void __init au1xxx_time_init(void)
-{
-}

arch/mips/basler/excite/excite_setup.c

@@ -68,7 +68,7 @@ DEFINE_SPINLOCK(titan_lock);
 int titan_irqflags;
 
 
-static void excite_timer_init(void)
+void __init plat_time_init(void)
 {
 	const u32 modebit5 = ocd_readl(0x00e4);
 	unsigned int
@@ -261,9 +261,6 @@ void __init plat_mem_setup(void)
 	/* Announce RAM to system */
 	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
 
-	/* Set up timer initialization hooks */
-	board_time_init = excite_timer_init;
-
 	/* Set up the peripheral address map */
 	*(boot_ocd_base + (LKB9 / sizeof (u32))) = 0;
 	*(boot_ocd_base + (LKB10 / sizeof (u32))) = 0;

arch/mips/bcm47xx/setup.c

@@ -119,6 +119,5 @@ void __init plat_mem_setup(void)
 	_machine_restart = bcm47xx_machine_restart;
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
-	board_time_init = bcm47xx_time_init;
 }
 

arch/mips/bcm47xx/time.c

@@ -28,8 +28,7 @@
 #include <asm/time.h>
 #include <bcm47xx.h>
 
-void __init
-bcm47xx_time_init(void)
+void __init plat_time_init(void)
 {
 	unsigned long hz;
 

arch/mips/dec/setup.c

@@ -145,13 +145,9 @@ static void __init dec_be_init(void)
 	}
 }
 
-
-extern void dec_time_init(void);
-
 void __init plat_mem_setup(void)
 {
 	board_be_init = dec_be_init;
-	board_time_init = dec_time_init;
 
 	wbflush_setup();
 

arch/mips/dec/time.c

@@ -35,7 +35,7 @@
 #include <asm/dec/ioasic_addrs.h>
 #include <asm/dec/machtype.h>
 
-static unsigned long dec_rtc_get_time(void)
+unsigned long read_persistent_clock(void)
 {
 	unsigned int year, mon, day, hour, min, sec, real_year;
 	unsigned long flags;
@@ -74,13 +74,13 @@ static unsigned long dec_rtc_get_time(void)
 }
 
 /*
- * In order to set the CMOS clock precisely, dec_rtc_set_mmss has to
+ * In order to set the CMOS clock precisely, rtc_mips_set_mmss has to
  * be called 500 ms after the second nowtime has started, because when
  * nowtime is written into the registers of the CMOS clock, it will
  * jump to the next second precisely 500 ms later.  Check the Dallas
  * DS1287 data sheet for details.
  */
-static int dec_rtc_set_mmss(unsigned long nowtime)
+int rtc_mips_set_mmss(unsigned long nowtime)
 {
 	int retval = 0;
 	int real_seconds, real_minutes, cmos_minutes;
@@ -139,7 +139,6 @@ static int dec_rtc_set_mmss(unsigned long nowtime)
 	return retval;
 }
 
-
 static int dec_timer_state(void)
 {
 	return (CMOS_READ(RTC_REG_C) & RTC_PF) != 0;
@@ -160,11 +159,8 @@ static cycle_t dec_ioasic_hpt_read(void)
 }
 
 
-void __init dec_time_init(void)
+void __init plat_time_init(void)
 {
-	rtc_mips_get_time = dec_rtc_get_time;
-	rtc_mips_set_mmss = dec_rtc_set_mmss;
-
 	mips_timer_state = dec_timer_state;
 	mips_timer_ack = dec_timer_ack;
 

arch/mips/emma2rh/markeins/setup.c

@@ -88,7 +88,7 @@ static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
 	return clock[reg];
 }
 
-static void __init emma2rh_time_init(void)
+void __init plat_time_init(void)
 {
 	u32 reg;
 	if (bus_frequency == 0)
@@ -124,8 +124,6 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE));
 
-	board_time_init = emma2rh_time_init;
-
 	_machine_restart = markeins_machine_restart;
 	_machine_halt = markeins_machine_halt;
 	pm_power_off = markeins_machine_power_off;

arch/mips/gt64120/wrppmc/setup.c

@@ -126,7 +126,6 @@ static void wrppmc_setup_serial(void)
 
 void __init plat_mem_setup(void)
 {
-	extern void wrppmc_time_init(void);
 	extern void wrppmc_machine_restart(char *command);
 	extern void wrppmc_machine_halt(void);
 	extern void wrppmc_machine_power_off(void);
@@ -135,9 +134,6 @@ void __init plat_mem_setup(void)
 	_machine_halt	 = wrppmc_machine_halt;
 	pm_power_off	 = wrppmc_machine_power_off;
 
-	/* Use MIPS Count/Compare Timer */
-	board_time_init   = wrppmc_time_init;
-
 	/* This makes the operations of 'in/out[bwl]' to the
 	 * physical address ( < KSEG0) can work via KSEG1
 	 */

arch/mips/gt64120/wrppmc/time.c

@@ -38,7 +38,7 @@ void __init plat_timer_setup(struct irqaction *irq)
  * NOTE: We disable all GT64120 timers, and use MIPS processor internal
  * timer as the source of kernel clock tick.
  */
-void __init wrppmc_time_init(void)
+void __init plat_time_init(void)
 {
 	/* Disable GT64120 timers */
 	GT_WRITE(GT_TC_CONTROL_OFS, 0x00);

arch/mips/jmr3927/rbhma3100/setup.c

@@ -109,7 +109,7 @@ static void jmr3927_timer_ack(void)
 	jmr3927_tmrptr->tisr = 0;       /* ack interrupt */
 }
 
-static void __init jmr3927_time_init(void)
+void __init plat_time_init(void)
 {
 	clocksource_mips.read = jmr3927_hpt_read;
 	mips_timer_ack = jmr3927_timer_ack;
@@ -141,8 +141,6 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
-	board_time_init = jmr3927_time_init;
-
 	_machine_restart = jmr3927_machine_restart;
 	_machine_halt = jmr3927_machine_halt;
 	pm_power_off = jmr3927_machine_power_off;

arch/mips/kernel/time.c

@@ -49,24 +49,19 @@
  * forward reference
  */
 DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
 
-/*
- * By default we provide the null RTC ops
- */
-static unsigned long null_rtc_get_time(void)
+int __weak rtc_mips_set_time(unsigned long sec)
 {
-	return mktime(2000, 1, 1, 0, 0, 0);
+	return 0;
 }
+EXPORT_SYMBOL(rtc_mips_set_time);
 
-static int null_rtc_set_time(unsigned long sec)
+int __weak rtc_mips_set_mmss(unsigned long nowtime)
 {
-	return 0;
+	return rtc_mips_set_time(nowtime);
 }
 
-unsigned long (*rtc_mips_get_time)(void) = null_rtc_get_time;
-int (*rtc_mips_set_time)(unsigned long) = null_rtc_set_time;
-int (*rtc_mips_set_mmss)(unsigned long);
-
 int update_persistent_clock(struct timespec now)
 {
 	return rtc_mips_set_mmss(now.tv_sec);
@@ -247,21 +242,18 @@ asmlinkage void ll_local_timer_interrupt(int irq)
 /*
  * time_init() - it does the following things.
  *
- * 1) board_time_init() -
+ * 1) plat_time_init() -
  * 	a) (optional) set up RTC routines,
  *      b) (optional) calibrate and set the mips_hpt_frequency
  *	    (only needed if you intended to use cpu counter as timer interrupt
  *	     source)
- * 2) setup xtime based on rtc_mips_get_time().
- * 3) calculate a couple of cached variables for later usage
- * 4) plat_timer_setup() -
+ * 2) calculate a couple of cached variables for later usage
+ * 3) plat_timer_setup() -
  *	a) (optional) over-write any choices made above by time_init().
  *	b) machine specific code should setup the timer irqaction.
  *	c) enable the timer interrupt
  */
 
-void (*board_time_init)(void);
-
 unsigned int mips_hpt_frequency;
 
 static struct irqaction timer_irqaction = {
@@ -341,19 +333,13 @@ static void __init init_mips_clocksource(void)
 	clocksource_register(&clocksource_mips);
 }
 
-void __init time_init(void)
+void __init __weak plat_time_init(void)
 {
-	if (board_time_init)
-		board_time_init();
-
-	if (!rtc_mips_set_mmss)
-		rtc_mips_set_mmss = rtc_mips_set_time;
-
-	xtime.tv_sec = rtc_mips_get_time();
-	xtime.tv_nsec = 0;
+}
 
-	set_normalized_timespec(&wall_to_monotonic,
-	                        -xtime.tv_sec, -xtime.tv_nsec);
+void __init time_init(void)
+{
+	plat_time_init();
 
 	/* Choose appropriate high precision timer routines.  */
 	if (!cpu_has_counter && !clocksource_mips.read)
@@ -459,7 +445,4 @@ void to_tm(unsigned long tim, struct rtc_time *tm)
 	tm->tm_wday = (gday + 4) % 7;	/* 1970/1/1 was Thursday */
 }
 
-EXPORT_SYMBOL(rtc_lock);
 EXPORT_SYMBOL(to_tm);
-EXPORT_SYMBOL(rtc_mips_set_time);
-EXPORT_SYMBOL(rtc_mips_get_time);

arch/mips/lasat/ds1603.c

@@ -135,8 +135,7 @@ static void rtc_end_op(void)
 	lasat_ndelay(1000);
 }
 
-/* interface */
-unsigned long ds1603_read(void)
+unsigned long read_persistent_clock(void)
 {
 	unsigned long word;
 	unsigned long flags;
@@ -147,10 +146,11 @@ unsigned long ds1603_read(void)
 	word = rtc_read_word();
 	rtc_end_op();
 	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	return word;
 }
 
-int ds1603_set(unsigned long time)
+int rtc_mips_set_mmss(unsigned long time)
 {
 	unsigned long flags;
 

arch/mips/lasat/ds1603.h

@@ -20,8 +20,6 @@ struct ds_defs {
 
 extern struct ds_defs *ds1603;
 
-unsigned long ds1603_read(void);
-int ds1603_set(unsigned long);
 void ds1603_set_trimmer(unsigned int);
 void ds1603_enable(void);
 void ds1603_disable(void);

arch/mips/lasat/setup.c

@@ -117,7 +117,7 @@ static struct notifier_block lasat_panic_block[] =
 	}
 };
 
-static void lasat_time_init(void)
+void plat_time_init(void)
 {
 	mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
 }
@@ -142,12 +142,8 @@ void __init plat_mem_setup(void)
 
 	lasat_reboot_setup();
 
-	board_time_init = lasat_time_init;
-
 #ifdef CONFIG_DS1603
 	ds1603 = &ds_defs[mips_machtype];
-	rtc_mips_get_time = ds1603_read;
-	rtc_mips_set_time = ds1603_set;
 #endif
 
 #ifdef DYNAMIC_SERIAL_INIT

arch/mips/lasat/sysctl.c

@@ -32,6 +32,8 @@
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 
+#include <asm/time.h>
+
 #include "sysctl.h"
 #include "ds1603.h"
 
@@ -106,7 +108,7 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
 
 	mutex_lock(&lasat_info_mutex);
 	if (!write) {
-		rtctmp = ds1603_read();
+		rtctmp = read_persistent_clock();
 		/* check for time < 0 and set to 0 */
 		if (rtctmp < 0)
 			rtctmp = 0;
@@ -116,7 +118,7 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
 		mutex_unlock(&lasat_info_mutex);
 		return r;
 	}
-	ds1603_set(rtctmp);
+	rtc_mips_set_mmss(rtctmp);
 	mutex_unlock(&lasat_info_mutex);
 
 	return 0;
@@ -152,7 +154,7 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
 	int r;
 
 	mutex_lock(&lasat_info_mutex);
-	rtctmp = ds1603_read();
+	rtctmp = read_persistent_clock();
 	if (rtctmp < 0)
 		rtctmp = 0;
 	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
@@ -161,7 +163,7 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
 		return r;
 	}
 	if (newval && newlen)
-		ds1603_set(rtctmp);
+		rtc_mips_set_mmss(rtctmp);
 	mutex_unlock(&lasat_info_mutex);
 
 	return 1;

arch/mips/lemote/lm2e/setup.c

@@ -58,13 +58,13 @@ void __init plat_timer_setup(struct irqaction *irq)
 	setup_irq(MIPS_CPU_IRQ_BASE + 7, irq);
 }
 
-static void __init loongson2e_time_init(void)
+void __init plat_time_init(void)
 {
 	/* setup mips r4k timer */
 	mips_hpt_frequency = cpu_clock_freq / 2;
 }
 
-static unsigned long __init mips_rtc_get_time(void)
+unsigned long read_persistent_clock(void)
 {
 	return mc146818_get_cmos_time();
 }
@@ -89,9 +89,6 @@ void __init plat_mem_setup(void)
 
 	mips_reboot_setup();
 
-	board_time_init = loongson2e_time_init;
-	rtc_mips_get_time = mips_rtc_get_time;
-
 	__wbflush = wbflush_loongson2e;
 
 	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);

arch/mips/mips-boards/atlas/atlas_setup.c

@@ -35,8 +35,6 @@
 #include <asm/traps.h>
 
 extern void mips_reboot_setup(void);
-extern void mips_time_init(void);
-extern unsigned long mips_rtc_get_time(void);
 
 #ifdef CONFIG_KGDB
 extern void kgdb_config(void);
@@ -63,9 +61,6 @@ void __init plat_mem_setup(void)
 	kgdb_config();
 #endif
 	mips_reboot_setup();
-
-	board_time_init = mips_time_init;
-	rtc_mips_get_time = mips_rtc_get_time;
 }
 
 static void __init serial_init(void)

arch/mips/mips-boards/generic/time.c

@@ -224,12 +224,12 @@ static unsigned int __init estimate_cpu_frequency(void)
 	return count;
 }
 
-unsigned long __init mips_rtc_get_time(void)
+unsigned long read_persistent_clock(void)
 {
 	return mc146818_get_cmos_time();
 }
 
-void __init mips_time_init(void)
+void __init plat_time_init(void)
 {
 	unsigned int est_freq;
 

arch/mips/mips-boards/malta/malta_setup.c

@@ -36,7 +36,6 @@
 #endif
 
 extern void mips_reboot_setup(void);
-extern void mips_time_init(void);
 extern unsigned long mips_rtc_get_time(void);
 
 #ifdef CONFIG_KGDB
@@ -185,7 +184,4 @@ void __init plat_mem_setup(void)
 #endif
 #endif
 	mips_reboot_setup();
-
-	board_time_init = mips_time_init;
-	rtc_mips_get_time = mips_rtc_get_time;
 }

arch/mips/mips-boards/sead/sead_setup.c

@@ -35,7 +35,6 @@
 #include <asm/time.h>
 
 extern void mips_reboot_setup(void);
-extern void mips_time_init(void);
 
 static void __init serial_init(void);
 
@@ -52,8 +51,6 @@ void __init plat_mem_setup(void)
 
 	serial_init ();
 
-	board_time_init = mips_time_init;
-
 	mips_reboot_setup();
 }
 

arch/mips/mipssim/sim_setup.c

@@ -36,7 +36,6 @@
 #include <asm/mips-boards/simint.h>
 
 
-extern void sim_time_init(void);
 static void __init serial_init(void);
 unsigned int _isbonito = 0;
 
@@ -54,7 +53,6 @@ void __init plat_mem_setup(void)
 
 	serial_init();
 
-	board_time_init = sim_time_init;
 	pr_info("Linux started...\n");
 
 #ifdef CONFIG_MIPS_MT_SMP

arch/mips/mipssim/sim_time.c

@@ -146,7 +146,7 @@ static unsigned int __init estimate_cpu_frequency(void)
 	return count;
 }
 
-void __init sim_time_init(void)
+void __init plat_time_init(void)
 {
 	unsigned int est_freq, flags;
 

arch/mips/philips/pnx8550/common/setup.c

@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void pnx8550_time_init(void);
 extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
@@ -104,8 +103,6 @@ void __init plat_mem_setup(void)
         _machine_halt = pnx8550_machine_halt;
         pm_power_off = pnx8550_machine_power_off;
 
-	board_time_init = pnx8550_time_init;
-
 	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
 	   Bit 1:Enable DAC Powerdown
 	  -> 0:DACs are enabled and are working normally

arch/mips/philips/pnx8550/common/time.c

@@ -1,6 +1,7 @@
 /*
  * Copyright 2001, 2002, 2003 MontaVista Software Inc.
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
  *
  * Common time service routines for MIPS machines. See
  * Documents/MIPS/README.txt.
@@ -46,16 +47,16 @@ static void timer_ack(void)
 }
 
 /*
- * pnx8550_time_init() - it does the following things:
+ * plat_time_init() - it does the following things:
  *
- * 1) board_time_init() -
+ * 1) plat_time_init() -
  * 	a) (optional) set up RTC routines,
  *      b) (optional) calibrate and set the mips_hpt_frequency
  *	    (only needed if you intended to use cpu counter as timer interrupt
  *	     source)
  */
 
-void pnx8550_time_init(void)
+__init void plat_time_init(void)
 {
 	unsigned int             n;
 	unsigned int             m;

arch/mips/pmc-sierra/msp71xx/msp_setup.c

@@ -25,7 +25,6 @@
 #define MSP_BOARD_RESET_GPIO	9
 #endif
 
-extern void msp_timer_init(void);
 extern void msp_serial_setup(void);
 extern void pmctwiled_setup(void);
 
@@ -149,8 +148,6 @@ void __init plat_mem_setup(void)
 	_machine_restart = msp_restart;
 	_machine_halt = msp_halt;
 	pm_power_off = msp_power_off;
-
-	board_time_init = msp_timer_init;
 }
 
 void __init prom_init(void)

arch/mips/pmc-sierra/msp71xx/msp_time.c

@@ -36,7 +36,7 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
-void __init msp_timer_init(void)
+void __init plat_time_init(void)
 {
 	char    *endp, *s;
 	unsigned long cpu_rate = 0;
@@ -81,7 +81,6 @@ void __init msp_timer_init(void)
 	mips_hpt_frequency = cpu_rate/2;
 }
 
-
 void __init plat_timer_setup(struct irqaction *irq)
 {
 #ifdef CONFIG_IRQ_MSP_CIC

arch/mips/pmc-sierra/yosemite/setup.c

@@ -70,7 +70,7 @@ void __init bus_error_init(void)
 }
 
 
-unsigned long m48t37y_get_time(void)
+unsigned long read_persistent_clock(void)
 {
 	unsigned int year, month, day, hour, min, sec;
 	unsigned long flags;
@@ -95,7 +95,7 @@ unsigned long m48t37y_get_time(void)
 	return mktime(year, month, day, hour, min, sec);
 }
 
-int m48t37y_set_time(unsigned long sec)
+int rtc_mips_set_time(unsigned long tim)
 {
 	struct rtc_time tm;
 	unsigned long flags;
@@ -138,7 +138,7 @@ void __init plat_timer_setup(struct irqaction *irq)
 	setup_irq(7, irq);
 }
 
-void yosemite_time_init(void)
+void __init plat_time_init(void)
 {
 	mips_hpt_frequency = cpu_clock_freq / 2;
 mips_hpt_frequency = 33000000 * 3 * 5;
@@ -198,17 +198,6 @@ static void __init py_rtc_setup(void)
 	m48t37_base = ioremap(YOSEMITE_RTC_BASE, YOSEMITE_RTC_SIZE);
 	if (!m48t37_base)
 		printk(KERN_ERR "Mapping the RTC failed\n");
-
-	rtc_mips_get_time = m48t37y_get_time;
-	rtc_mips_set_time = m48t37y_set_time;
-
-	write_seqlock(&xtime_lock);
-	xtime.tv_sec = m48t37y_get_time();
-	xtime.tv_nsec = 0;
-
-	set_normalized_timespec(&wall_to_monotonic,
-	                        -xtime.tv_sec, -xtime.tv_nsec);
-	write_sequnlock(&xtime_lock);
 }
 
 /* Not only time init but that's what the hook it's called through is named */
@@ -221,7 +210,6 @@ static void __init py_late_time_init(void)
 
 void __init plat_mem_setup(void)
 {
-	board_time_init = yosemite_time_init;
 	late_time_init = py_late_time_init;
 
 	/* Add memory regions */

arch/mips/sgi-ip22/ip22-setup.c

@@ -51,7 +51,6 @@ void ip22_do_break(void)
 EXPORT_SYMBOL(ip22_do_break);
 
 extern void ip22_be_init(void) __init;
-extern void ip22_time_init(void) __init;
 
 void __init plat_mem_setup(void)
 {
@@ -59,7 +58,6 @@ void __init plat_mem_setup(void)
 	char *cserial;
 
 	board_be_init = ip22_be_init;
-	ip22_time_init();
 
 	/* Init the INDY HPC I/O controller.  Need to call this before
 	 * fucking with the memory controller because it needs to know the

arch/mips/sgi-ip22/ip22-time.c

@@ -32,7 +32,7 @@
  * note that mktime uses month from 1 to 12 while to_tm
  * uses 0 to 11.
  */
-static unsigned long indy_rtc_get_time(void)
+unsigned long read_persistent_clock(void)
 {
 	unsigned int yrs, mon, day, hrs, min, sec;
 	unsigned int save_control;
@@ -60,7 +60,7 @@ static unsigned long indy_rtc_get_time(void)
 	return mktime(yrs + 1900, mon, day, hrs, min, sec);
 }
 
-static int indy_rtc_set_time(unsigned long tim)
+int rtc_mips_set_time(unsigned long tim)
 {
 	struct rtc_time tm;
 	unsigned int save_control;
@@ -128,7 +128,7 @@ static unsigned long dosample(void)
 /*
  * Here we need to calibrate the cycle counter to at least be close.
  */
-static __init void indy_time_init(void)
+__init void plat_time_init(void)
 {
 	unsigned long r4k_ticks[3];
 	unsigned long r4k_tick;
@@ -207,12 +207,3 @@ void __init plat_timer_setup(struct irqaction *irq)
 	/* setup irqaction */
 	setup_irq(SGI_TIMER_IRQ, irq);
 }
-
-void __init ip22_time_init(void)
-{
-	/* setup hookup functions */
-	rtc_mips_get_time = indy_rtc_get_time;
-	rtc_mips_set_time = indy_rtc_set_time;
-
-	board_time_init = indy_time_init;
-}

arch/mips/sgi-ip27/ip27-init.c

@@ -194,7 +194,6 @@ static inline void ioc3_eth_init(void)
 	ioc3->eier = 0;
 }
 
-extern void ip27_time_init(void);
 extern void ip27_reboot_setup(void);
 
 void __init plat_mem_setup(void)
@@ -241,6 +240,4 @@ void __init plat_mem_setup(void)
 	per_cpu_init();
 
 	set_io_port_base(IO_BASE);
-
-	board_time_init = ip27_time_init;
 }

arch/mips/sgi-ip27/ip27-timer.c

@@ -123,7 +123,7 @@ again:
 #include <asm/sn/sn0/hubio.h>
 #include <asm/pci/bridge.h>
 
-static __init unsigned long get_m48t35_time(void)
+unsigned long read_persistent_clock(void)
 {
         unsigned int year, month, date, hour, min, sec;
 	struct m48t35_rtc *rtc;
@@ -205,12 +205,10 @@ static cycle_t ip27_hpt_read(void)
 	return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
 }
 
-void __init ip27_time_init(void)
+void __init plat_time_init(void)
 {
 	clocksource_mips.read = ip27_hpt_read;
 	mips_hpt_frequency = CYCLES_PER_SEC;
-	xtime.tv_sec = get_m48t35_time();
-	xtime.tv_nsec = 0;
 }
 
 void __init cpu_time_init(void)

arch/mips/sgi-ip32/ip32-setup.c

@@ -62,10 +62,15 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
 }
 #endif
 
+unsigned long read_persistent_clock(void)
+{
+	return mc146818_get_cmos_time();
+}
+
 /* An arbitrary time; this can be decreased if reliability looks good */
 #define WAIT_MS 10
 
-void __init ip32_time_init(void)
+void __init plat_time_init(void)
 {
 	printk(KERN_INFO "Calibrating system timer... ");
 	write_c0_count(0);
@@ -85,11 +90,6 @@ void __init plat_mem_setup(void)
 {
 	board_be_init = ip32_be_init;
 
-	rtc_mips_get_time = mc146818_get_cmos_time;
-	rtc_mips_set_mmss = mc146818_set_rtc_mmss;
-
-	board_time_init = ip32_time_init;
-
 #ifdef CONFIG_SGI_O2MACE_ETH
 	{
 		char *mac = ArcGetEnvironmentVariable("eaddr");

arch/mips/sibyte/swarm/setup.c

@@ -69,7 +69,7 @@ const char *get_system_type(void)
 	return "SiByte " SIBYTE_BOARD_NAME;
 }
 
-void __init swarm_time_init(void)
+void __init plat_time_init(void)
 {
 #if defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 	/* Setup HPT */
@@ -104,6 +104,44 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 	return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
 }
 
+enum swarm_rtc_type {
+	RTC_NONE,
+	RTC_XICOR,
+	RTC_M4LT81
+};
+
+enum swarm_rtc_type swarm_rtc_type;
+
+unsigned long read_persistent_clock(void)
+{
+	switch (swarm_rtc_type) {
+	case RTC_XICOR:
+		return xicor_get_time();
+
+	case RTC_M4LT81:
+		return m41t81_get_time();
+
+	case RTC_NONE:
+	default:
+		return mktime(2000, 1, 1, 0, 0, 0);
+	}
+}
+
+int rtc_mips_set_time(unsigned long sec)
+{
+	switch (swarm_rtc_type) {
+	case RTC_XICOR:
+		return xicor_set_time(sec);
+
+	case RTC_M4LT81:
+		return m41t81_set_time(sec);
+
+	case RTC_NONE:
+	default:
+		return -1;
+	}
+}
+
 void __init plat_mem_setup(void)
 {
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
@@ -116,20 +154,12 @@ void __init plat_mem_setup(void)
 
 	panic_timeout = 5;  /* For debug.  */
 
-	board_time_init = swarm_time_init;
 	board_be_handler = swarm_be_handler;
 
-	if (xicor_probe()) {
-		printk("swarm setup: Xicor 1241 RTC detected.\n");
-		rtc_mips_get_time = xicor_get_time;
-		rtc_mips_set_time = xicor_set_time;
-	}
-
-	if (m41t81_probe()) {
-		printk("swarm setup: M41T81 RTC detected.\n");
-		rtc_mips_get_time = m41t81_get_time;
-		rtc_mips_set_time = m41t81_set_time;
-	}
+	if (xicor_probe())
+		swarm_rtc_type = RTC_XICOR;
+	if (m41t81_probe())
+		swarm_rtc_type = RTC_M4LT81;
 
 	printk("This kernel optimized for "
 #ifdef CONFIG_SIMULATION

arch/mips/sni/pcimt.c

@@ -313,7 +313,6 @@ void __init sni_pcimt_init(void)
 {
 	sni_pcimt_detect();
 	sni_pcimt_sc_init();
-	board_time_init = sni_cpu_time_init;
 	ioport_resource.end = sni_io_resource.end;
 #ifdef CONFIG_PCI
 	PCIBIOS_MIN_IO = 0x9000;

arch/mips/sni/pcit.c

@@ -263,7 +263,6 @@ void __init sni_pcit_cplus_irq_init(void)
 
 void __init sni_pcit_init(void)
 {
-	board_time_init = sni_cpu_time_init;
 	ioport_resource.end = sni_io_resource.end;
 #ifdef CONFIG_PCI
 	PCIBIOS_MIN_IO = 0x9000;

arch/mips/sni/rm200.c

@@ -194,5 +194,4 @@ void __init sni_rm200_init(void)
 {
 	set_io_port_base(SNI_PORT_BASE + 0x02000000);
 	ioport_resource.end += 0x02000000;
-	board_time_init = sni_cpu_time_init;
 }

arch/mips/sni/time.c

@@ -4,6 +4,7 @@
 
 #include <asm/sni.h>
 #include <asm/time.h>
+#include <asm-generic/rtc.h>
 
 #define SNI_CLOCK_TICK_RATE     3686400
 #define SNI_COUNTER2_DIV        64
@@ -71,7 +72,7 @@ static __init unsigned long dosample(void)
 /*
  * Here we need to calibrate the cycle counter to at least be close.
  */
-__init void sni_cpu_time_init(void)
+void __init plat_time_init(void)
 {
 	unsigned long r4k_ticks[3];
 	unsigned long r4k_tick;
@@ -146,3 +147,8 @@ void __init plat_timer_setup(struct irqaction *irq)
 	        break;
 	}
 }
+
+unsigned long read_persistent_clock(void)
+{
+	return -1;
+}

arch/mips/tx4927/common/tx4927_setup.c

@@ -49,14 +49,11 @@
 
 #undef DEBUG
 
-void __init tx4927_time_init(void);
 void dump_cp0(char *key);
 
 
 void __init plat_mem_setup(void)
 {
-	board_time_init = tx4927_time_init;
-
 #ifdef CONFIG_TOSHIBA_RBTX4927
 	{
 		extern void toshiba_rbtx4927_setup(void);
@@ -65,20 +62,16 @@ void __init plat_mem_setup(void)
 #endif
 }
 
-void __init tx4927_time_init(void)
+void __init plat_time_init(void)
 {
-
 #ifdef CONFIG_TOSHIBA_RBTX4927
 	{
 		extern void toshiba_rbtx4927_time_init(void);
 		toshiba_rbtx4927_time_init();
 	}
 #endif
-
-	return;
 }
 
-
 void __init plat_timer_setup(struct irqaction *irq)
 {
 	setup_irq(TX4927_IRQ_CPU_TIMER, irq);

arch/mips/tx4938/common/setup.c

@@ -34,25 +34,16 @@
 #include <asm/tx4938/rbtx4938.h>
 
 extern void toshiba_rbtx4938_setup(void);
-extern void rbtx4938_time_init(void);
 
 void __init tx4938_setup(void);
-void __init tx4938_time_init(void);
 void dump_cp0(char *key);
 
 void __init
 plat_mem_setup(void)
 {
-	board_time_init = tx4938_time_init;
 	toshiba_rbtx4938_setup();
 }
 
-void __init
-tx4938_time_init(void)
-{
-	rbtx4938_time_init();
-}
-
 void __init plat_timer_setup(struct irqaction *irq)
 {
 	setup_irq(TX4938_IRQ_CPU_TIMER, irq);

arch/mips/tx4938/toshiba_rbtx4938/setup.c

@@ -39,7 +39,6 @@
 #include <asm/tx4938/spi.h>
 #include <asm/gpio.h>
 
-extern void rbtx4938_time_init(void) __init;
 extern char * __init prom_getcmdline(void);
 static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
 
@@ -856,7 +855,7 @@ void tx4938_report_pcic_status(void)
 /* We use onchip r4k counter or TMR timer as our system wide timer
  * interrupt running at 100HZ. */
 
-void __init rbtx4938_time_init(void)
+void __init plat_time_init(void)
 {
 	mips_hpt_frequency = txx9_cpu_clock / 2;
 }

arch/mips/vr41xx/common/init.c

@@ -36,7 +36,7 @@ static void __init iomem_resource_init(void)
 	iomem_resource.end = IO_MEM_RESOURCE_END;
 }
 
-static void __init setup_timer_frequency(void)
+void __init plat_time_init(void)
 {
 	unsigned long tclock;
 
@@ -53,16 +53,10 @@ void __init plat_timer_setup(struct irqaction *irq)
 	setup_irq(TIMER_IRQ, irq);
 }
 
-static void __init timer_init(void)
-{
-	board_time_init = setup_timer_frequency;
-}
-
 void __init plat_mem_setup(void)
 {
 	vr41xx_calculate_clock_frequency();
 
-	timer_init();
 	iomem_resource_init();
 }
 

include/asm-mips/mach-bcm47xx/bcm47xx.h

@@ -22,6 +22,4 @@
 /* SSB bus */
 extern struct ssb_bus ssb_bcm47xx;
 
-extern void bcm47xx_time_init(void);
-
 #endif /* __ASM_BCM47XX_H */

include/asm-mips/time.h

@@ -26,15 +26,13 @@
 extern spinlock_t rtc_lock;
 
 /*
- * RTC ops.  By default, they point to no-RTC functions.
- *	rtc_mips_get_time - mktime(year, mon, day, hour, min, sec) in seconds.
+ * RTC ops.  By default, they point to weak no-op RTC functions.
  *	rtc_mips_set_time - reverse the above translation and set time to RTC.
  *	rtc_mips_set_mmss - similar to rtc_set_time, but only min and sec need
  *			to be set.  Used by RTC sync-up.
  */
-extern unsigned long (*rtc_mips_get_time)(void);
-extern int (*rtc_mips_set_time)(unsigned long);
-extern int (*rtc_mips_set_mmss)(unsigned long);
+extern int rtc_mips_set_time(unsigned long);
+extern int rtc_mips_set_mmss(unsigned long);
 
 /*
  * Timer interrupt functions.
@@ -75,11 +73,9 @@ extern asmlinkage void ll_local_timer_interrupt(int irq);
 
 /*
  * board specific routines required by time_init().
- * board_time_init is defaulted to NULL and can remain so.
- * plat_timer_setup must be setup properly in machine setup routine.
  */
 struct irqaction;
-extern void (*board_time_init)(void);
+extern void plat_time_init(void);
 extern void plat_timer_setup(struct irqaction *irq);
 
 /*