Merge commit 'origin/master' into next

CREDITS

@@ -1253,6 +1253,10 @@ S: 8124 Constitution Apt. 7
 S: Sterling Heights, Michigan 48313
 S: USA
 
+N: Wolfgang Grandegger
+E: wg@grandegger.com
+D: Controller Area Network (device drivers)
+
 N: William Greathouse
 E: wgreathouse@smva.com
 E: wgreathouse@myfavoritei.com

Documentation/DocBook/mac80211.tmpl

@@ -145,7 +145,6 @@ usage should require reading the full document.
         interface in STA mode at first!
       </para>
 !Finclude/net/mac80211.h ieee80211_if_init_conf
-!Finclude/net/mac80211.h ieee80211_if_conf
     </chapter>
 
     <chapter id="rx-tx">

Documentation/feature-removal-schedule.txt

@@ -438,6 +438,13 @@ Why:	Superseded by tdfxfb. I2C/DDC support used to live in a separate
 Who:	Jean Delvare <khali@linux-fr.org>
 	Krzysztof Helt <krzysztof.h1@wp.pl>
 
+---------------------------
+
+What:	CONFIG_RFKILL_INPUT
+When:	2.6.33
+Why:	Should be implemented in userspace, policy daemon.
+Who:	Johannes Berg <johannes@sipsolutions.net>
+
 ----------------------------
 
 What:	CONFIG_X86_OLD_MCE

Documentation/filesystems/nilfs2.txt

@@ -39,9 +39,8 @@ Features which NILFS2 does not support yet:
 	- extended attributes
 	- POSIX ACLs
 	- quotas
-	- writable snapshots
-	- remote backup (CDP)
-	- data integrity
+	- fsck
+	- resize
 	- defragmentation
 
 Mount options

Documentation/filesystems/vfat.txt

@@ -132,6 +132,11 @@ rodir	      -- FAT has the ATTR_RO (read-only) attribute. On Windows,
 		 If you want to use ATTR_RO as read-only flag even for
 		 the directory, set this option.
 
+errors=panic|continue|remount-ro
+	      -- specify FAT behavior on critical errors: panic, continue
+		 without doing anything or remount the partition in
+		 read-only mode (default behavior).
+
 <bool>: 0,1,yes,no,true,false
 
 TODO

Documentation/hwmon/f71882fg

@@ -2,14 +2,18 @@ Kernel driver f71882fg
 ======================
 
 Supported chips:
-  * Fintek F71882FG and F71883FG
-    Prefix: 'f71882fg'
+  * Fintek F71858FG
+    Prefix: 'f71858fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
   * Fintek F71862FG and F71863FG
     Prefix: 'f71862fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71882FG and F71883FG
+    Prefix: 'f71882fg'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Available from the Fintek website
   * Fintek F8000
     Prefix: 'f8000'
     Addresses scanned: none, address read from Super I/O config space
@@ -66,13 +70,13 @@ printed when loading the driver.
 
 Three different fan control modes are supported; the mode number is written
 to the pwm#_enable file. Note that not all modes are supported on all
-chips, and some modes may only be available in RPM / PWM mode on the F8000.
+chips, and some modes may only be available in RPM / PWM mode.
 Writing an unsupported mode will result in an invalid parameter error.
 
 * 1: Manual mode
   You ask for a specific PWM duty cycle / DC voltage or a specific % of
   fan#_full_speed by writing to the pwm# file. This mode is only
-  available on the F8000 if the fan channel is in RPM mode.
+  available on the F71858FG / F8000 if the fan channel is in RPM mode.
 
 * 2: Normal auto mode
   You can define a number of temperature/fan speed trip points, which % the

Documentation/hwmon/ibmaem

@@ -7,7 +7,7 @@ henceforth as AEM.
 Supported systems:
   * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
-    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
     Prefix: 'ibmaem'
     Datasheet: Not available

Documentation/hwmon/sysfs-interface

@@ -70,6 +70,7 @@ are interpreted as 0! For more on how written strings are interpreted see the
 [0-*]	denotes any positive number starting from 0
 [1-*]	denotes any positive number starting from 1
 RO	read only value
+WO	write only value
 RW	read/write value
 
 Read/write values may be read-only for some chips, depending on the
@@ -295,6 +296,24 @@ temp[1-*]_label	Suggested temperature channel label.
 		user-space.
 		RO
 
+temp[1-*]_lowest
+		Historical minimum temperature
+		Unit: millidegree Celsius
+		RO
+
+temp[1-*]_highest
+		Historical maximum temperature
+		Unit: millidegree Celsius
+		RO
+
+temp[1-*]_reset_history
+		Reset temp_lowest and temp_highest
+		WO
+
+temp_reset_history
+		Reset temp_lowest and temp_highest for all sensors
+		WO
+
 Some chips measure temperature using external thermistors and an ADC, and
 report the temperature measurement as a voltage. Converting this voltage
 back to a temperature (or the other way around for limits) requires

Documentation/hwmon/tmp401

@@ -0,0 +1,42 @@
+Kernel driver tmp401
+====================
+
+Supported chips:
+  * Texas Instruments TMP401
+    Prefix: 'tmp401'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
+  * Texas Instruments TMP411
+    Prefix: 'tmp411'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
+
+Authors:
+         Hans de Goede <hdegoede@redhat.com>
+	 Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP401 and
+TMP411 chips. These chips implements one remote and one local
+temperature sensor. Temperature is measured in degrees
+Celsius. Resolution of the remote sensor is 0.0625 degree. Local
+sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
+supported by the driver so far, so using the default resolution of 0.5
+degree).
+
+The driver provides the common sysfs-interface for temperatures (see
+/Documentation/hwmon/sysfs-interface under Temperatures).
+
+The TMP411 chip is compatible with TMP401. It provides some additional
+features.
+
+* Minimum and Maximum temperature measured since power-on, chip-reset
+
+  Exported via sysfs attributes tempX_lowest and tempX_highest.
+
+* Reset of historical minimum/maximum temperature measurements
+
+  Exported via sysfs attribute temp_reset_history. Writing 1 to this
+  file triggers a reset.

Documentation/hwmon/w83627ehf

@@ -12,6 +12,10 @@ Supported chips:
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet:
         http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf
+  * Winbond W83627DHG-P
+    Prefix: 'w83627dhg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: not available
   * Winbond W83667HG
     Prefix: 'w83667hg'
     Addresses scanned: ISA address retrieved from Super I/O registers
@@ -28,8 +32,8 @@ Description
 -----------
 
 This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG and W83667HG super I/O chips. We will refer to them collectively
-as Winbond chips.
+W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
+collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
@@ -135,3 +139,6 @@ done in the driver for all register addresses.
 The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and
 the ICH8 southbridge gets that data via PECI from the DHG, so that the
 southbridge drives the fans. And the DHG supports SST, a one-wire serial bus.
+
+The DHG-P has an additional automatic fan speed control mode named Smart Fan
+(TM) III+. This mode is not yet supported by the driver.

Documentation/i2c/busses/i2c-viapro

@@ -19,6 +19,9 @@ Supported adapters:
   * VIA Technologies, Inc. VX800/VX820
     Datasheet: available on http://linux.via.com.tw
 
+  * VIA Technologies, Inc. VX855/VX875
+    Datasheet: Availability unknown
+
 Authors:
 	Kyösti Mälkki <kmalkki@cc.hut.fi>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -53,6 +56,7 @@ Your lspci -n listing must show one of these :
  device 1106:3287   (VT8251)
  device 1106:8324   (CX700)
  device 1106:8353   (VX800/VX820)
+ device 1106:8409   (VX855/VX875)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.

Documentation/isdn/00-INDEX

@@ -22,16 +22,11 @@ README.gigaset
 	- info on the drivers for Siemens Gigaset ISDN adapters.
 README.icn
 	- info on the ICN-ISDN-card and its driver.
+>>>>>>> 93af7aca44f0e82e67bda10a0fb73d383edcc8bd:Documentation/isdn/00-INDEX
 README.HiSax
 	- info on the HiSax driver which replaces the old teles.
-README.hfc-pci
-	- info on hfc-pci based cards.
-README.pcbit
-	- info on the PCBIT-D ISDN adapter and driver.
-README.syncppp
-	- info on running Sync PPP over ISDN.
-syncPPP.FAQ
-	- frequently asked questions about running PPP over ISDN.
+README.audio
+	- info for running audio over ISDN.
 README.avmb1
 	- info on driver for AVM-B1 ISDN card.
 README.act2000
@@ -42,10 +37,28 @@ README.concap
 	- info on "CONCAP" encapsulation protocol interface used for X.25.
 README.diversion
 	- info on module for isdn diversion services.
+README.fax
+	- info for using Fax over ISDN.
+README.gigaset
+	- info on the drivers for Siemens Gigaset ISDN adapters
+README.hfc-pci
+	- info on hfc-pci based cards.
+README.hysdn
+        - info on driver for Hypercope active HYSDN cards
+README.icn
+	- info on the ICN-ISDN-card and its driver.
+README.mISDN
+	- info on the Modular ISDN subsystem (mISDN)
+README.pcbit
+	- info on the PCBIT-D ISDN adapter and driver.
 README.sc
 	- info on driver for Spellcaster cards.
+README.syncppp
+	- info on running Sync PPP over ISDN.
 README.x25
 	- info for running X.25 over ISDN.
+syncPPP.FAQ
+	- frequently asked questions about running PPP over ISDN.
 README.hysdn
 	- info on driver for Hypercope active HYSDN cards
 README.mISDN

Documentation/isdn/INTERFACE.CAPI

@@ -45,7 +45,7 @@ From then on, Kernel CAPI may call the registered callback functions for the
 device.
 
 If the device becomes unusable for any reason (shutdown, disconnect ...), the
-driver has to call capi_ctr_reseted(). This will prevent further calls to the
+driver has to call capi_ctr_down(). This will prevent further calls to the
 callback functions by Kernel CAPI.
 
 
@@ -114,20 +114,36 @@ char *driver_name
 int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
 	(optional) pointer to a callback function for sending firmware and
 	configuration data to the device
+	Return value: 0 on success, error code on error
+	Called in process context.
 
 void (*reset_ctr)(struct capi_ctr *ctrlr)
-	pointer to a callback function for performing a reset on the device,
-	releasing all registered applications
+	(optional) pointer to a callback function for performing a reset on
+	the device, releasing all registered applications
+	Called in process context.
 
 void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
 			capi_register_params *rparam)
 void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
 	pointers to callback functions for registration and deregistration of
 	applications with the device
+	Calls to these functions are serialized by Kernel CAPI so that only
+	one call to any of them is active at any time.
 
 u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	pointer to a callback function for sending a CAPI message to the
 	device
+	Return value: CAPI error code
+	If the method returns 0 (CAPI_NOERROR) the driver has taken ownership
+	of the skb and the caller may no longer access it. If it returns a
+	non-zero (error) value then ownership of the skb returns to the caller
+	who may reuse or free it.
+	The return value should only be used to signal problems with respect
+	to accepting or queueing the message. Errors occurring during the
+	actual processing of the message should be signaled with an
+	appropriate reply message.
+	Calls to this function are not serialized by Kernel CAPI, ie. it must
+	be prepared to be re-entered.
 
 char *(*procinfo)(struct capi_ctr *ctrlr)
 	pointer to a callback function returning the entry for the device in
@@ -138,6 +154,8 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
+Note: Callback functions are never called in interrupt context.
+
 - to be filled in before calling capi_ctr_ready():
 
 u8 manu[CAPI_MANUFACTURER_LEN]
@@ -153,6 +171,45 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
+4.3 The _cmsg Structure
+
+(declared in <linux/isdn/capiutil.h>)
+
+The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
+accessible form. It contains members for all possible CAPI 2.0 parameters, of
+which only those appearing in the message type currently being processed are
+actually used. Unused members should be set to zero.
+
+Members are named after the CAPI 2.0 standard names of the parameters they
+represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
+types are:
+
+u8          for CAPI parameters of type 'byte'
+
+u16         for CAPI parameters of type 'word'
+
+u32         for CAPI parameters of type 'dword'
+
+_cstruct    for CAPI parameters of type 'struct' not containing any
+	    variably-sized (struct) subparameters (eg. 'Called Party Number')
+	    The member is a pointer to a buffer containing the parameter in
+	    CAPI encoding (length + content). It may also be NULL, which will
+	    be taken to represent an empty (zero length) parameter.
+
+_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
+	    subparameters ('Additional Info' and 'B Protocol')
+	    The representation is a single byte containing one of the values:
+	    CAPI_DEFAULT: the parameter is empty
+	    CAPI_COMPOSE: the values of the subparameters are stored
+	    individually in the corresponding _cmsg structure members
+
+Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
+messages between their transport encoding described in the CAPI 2.0 standard
+and their _cmsg structure representation. Note that capi_cmsg2message() does
+not know or check the size of its destination buffer. The caller must make
+sure it is big enough to accomodate the resulting CAPI message.
+
+
 5. Lower Layer Interface Functions
 
 (declared in <linux/isdn/capilli.h>)
@@ -166,7 +223,7 @@ int detach_capi_ctr(struct capi_ctr *ctrlr)
 	register/unregister a device (controller) with Kernel CAPI
 
 void capi_ctr_ready(struct capi_ctr *ctrlr)
-void capi_ctr_reseted(struct capi_ctr *ctrlr)
+void capi_ctr_down(struct capi_ctr *ctrlr)
 	signal controller ready/not ready
 
 void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
@@ -211,3 +268,32 @@ CAPIMSG_CONTROL(m)	CAPIMSG_SETCONTROL(m, contr)	Controller/PLCI/NCCI
 							(u32)
 CAPIMSG_DATALEN(m)	CAPIMSG_SETDATALEN(m, len)	Data Length (u16)
 
+
+Library functions for working with _cmsg structures
+(from <linux/isdn/capiutil.h>):
+
+unsigned capi_cmsg2message(_cmsg *cmsg, u8 *msg)
+	Assembles a CAPI 2.0 message from the parameters in *cmsg, storing the
+	result in *msg.
+
+unsigned capi_message2cmsg(_cmsg *cmsg, u8 *msg)
+	Disassembles the CAPI 2.0 message in *msg, storing the parameters in
+	*cmsg.
+
+unsigned capi_cmsg_header(_cmsg *cmsg, u16 ApplId, u8 Command, u8 Subcommand,
+			  u16 Messagenumber, u32 Controller)
+	Fills the header part and address field of the _cmsg structure *cmsg
+	with the given values, zeroing the remainder of the structure so only
+	parameters with non-default values need to be changed before sending
+	the message.
+
+void capi_cmsg_answer(_cmsg *cmsg)
+	Sets the low bit of the Subcommand field in *cmsg, thereby converting
+	_REQ to _CONF and _IND to _RESP.
+
+char *capi_cmd2str(u8 Command, u8 Subcommand)
+	Returns the CAPI 2.0 message name corresponding to the given command
+	and subcommand values, as a static ASCII string. The return value may
+	be NULL if the command/subcommand is not one of those defined in the
+	CAPI 2.0 standard.
+

Documentation/isdn/README.gigaset

@@ -149,10 +149,8 @@ GigaSet 307x Device Driver
      configuration files and chat scripts in the gigaset-VERSION/ppp directory
      in the driver packages from http://sourceforge.net/projects/gigaset307x/.
      Please note that the USB drivers are not able to change the state of the
-     control lines (the M105 driver can be configured to use some undocumented
-     control requests, if you really need the control lines, though). This means
-     you must use "Stupid Mode" if you are using wvdial or you should use the
-     nocrtscts option of pppd.
+     control lines. This means you must use "Stupid Mode" if you are using
+     wvdial or you should use the nocrtscts option of pppd.
      You must also assure that the ppp_async module is loaded with the parameter
      flag_time=0. You can do this e.g. by adding a line like
 
@@ -190,20 +188,19 @@ GigaSet 307x Device Driver
      You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
      setting (ttyGxy is ttyGU0 or ttyGB0).
 
-2.6. M105 Undocumented USB Requests
-     ------------------------------
-
-     The Gigaset M105 USB data box understands a couple of useful, but
-     undocumented USB commands. These requests are not used in normal
-     operation (for wireless access to the base), but are needed for access
-     to the M105's own configuration mode (registration to the base, baudrate
-     and line format settings, device status queries) via the gigacontr
-     utility. Their use is controlled by the kernel configuration option
-     "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you
-     encounter error code -ENOTTY when trying to use some features of the
-     M105, try setting that option to "y" via 'make {x,menu}config' and
-     recompiling the driver.
-
+2.6. Unregistered Wireless Devices (M101/M105)
+     -----------------------------------------
+     The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
+     the M101 and M105 wireless devices to be used as ISDN devices for ISDN
+     connections through a Gigaset base. Therefore they assume that the device
+     is registered to a DECT base.
+
+     If the M101/M105 device is not registered to a base, initialization of
+     the device fails, and a corresponding error message is logged by the
+     driver. In that situation, a restricted set of functions is available
+     which includes, in particular, those necessary for registering the device
+     to a base or for switching it between Fixed Part and Portable Part
+     modes.
 
 3.   Troubleshooting
      ---------------
@@ -234,11 +231,12 @@ GigaSet 307x Device Driver
         Select Unimodem mode for all DECT data adapters. (see section 2.4.)
 
      Problem:
-        You want to configure your USB DECT data adapter (M105) but gigacontr
-        reports an error: "/dev/ttyGU0: Inappropriate ioctl for device".
+	Messages like this:
+	    usb_gigaset 3-2:1.0: Could not initialize the device.
+	appear in your syslog.
      Solution:
-        Recompile the usb_gigaset driver with the kernel configuration option
-        CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.)
+	Check whether your M10x wireless device is correctly registered to the
+	Gigaset base. (see section 2.6.)
 
 3.2. Telling the driver to provide more information
      ----------------------------------------------

Documentation/networking/can.txt

@@ -36,10 +36,15 @@ This file contains
     6.2 local loopback of sent frames
     6.3 CAN controller hardware filters
     6.4 The virtual CAN driver (vcan)
-    6.5 currently supported CAN hardware
-    6.6 todo
+    6.5 The CAN network device driver interface
+      6.5.1 Netlink interface to set/get devices properties
+      6.5.2 Setting the CAN bit-timing
+      6.5.3 Starting and stopping the CAN network device
+    6.6 supported CAN hardware
 
-  7 Credits
+  7 Socket CAN resources
+
+  8 Credits
 
 ============================================================================
 
@@ -234,6 +239,8 @@ solution for a couple of reasons:
   the user application using the common CAN filter mechanisms. Inside
   this filter definition the (interested) type of errors may be
   selected. The reception of error frames is disabled by default.
+  The format of the CAN error frame is briefly decribed in the Linux
+  header file "include/linux/can/error.h".
 
 4. How to use Socket CAN
 ------------------------
@@ -605,61 +612,213 @@ solution for a couple of reasons:
   removal of vcan network devices can be managed with the ip(8) tool:
 
   - Create a virtual CAN network interface:
-       ip link add type vcan
+       $ ip link add type vcan
 
   - Create a virtual CAN network interface with a specific name 'vcan42':
-       ip link add dev vcan42 type vcan
+       $ ip link add dev vcan42 type vcan
 
   - Remove a (virtual CAN) network interface 'vcan42':
-       ip link del vcan42
-
-  The tool 'vcan' from the SocketCAN SVN repository on BerliOS is obsolete.
-
-  Virtual CAN network device creation in older Kernels:
-  In Linux Kernel versions < 2.6.24 the vcan driver creates 4 vcan
-  netdevices at module load time by default. This value can be changed
-  with the module parameter 'numdev'. E.g. 'modprobe vcan numdev=8'
-
-  6.5 currently supported CAN hardware
+       $ ip link del vcan42
+
+  6.5 The CAN network device driver interface
+
+  The CAN network device driver interface provides a generic interface
+  to setup, configure and monitor CAN network devices. The user can then
+  configure the CAN device, like setting the bit-timing parameters, via
+  the netlink interface using the program "ip" from the "IPROUTE2"
+  utility suite. The following chapter describes briefly how to use it.
+  Furthermore, the interface uses a common data structure and exports a
+  set of common functions, which all real CAN network device drivers
+  should use. Please have a look to the SJA1000 or MSCAN driver to
+  understand how to use them. The name of the module is can-dev.ko.
+
+  6.5.1 Netlink interface to set/get devices properties
+
+  The CAN device must be configured via netlink interface. The supported
+  netlink message types are defined and briefly described in
+  "include/linux/can/netlink.h". CAN link support for the program "ip"
+  of the IPROUTE2 utility suite is avaiable and it can be used as shown
+  below:
+
+  - Setting CAN device properties:
+
+    $ ip link set can0 type can help
+    Usage: ip link set DEVICE type can
+    	[ bitrate BITRATE [ sample-point SAMPLE-POINT] ] |
+    	[ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
+     	  phase-seg2 PHASE-SEG2 [ sjw SJW ] ]
+
+    	[ loopback { on | off } ]
+    	[ listen-only { on | off } ]
+    	[ triple-sampling { on | off } ]
+
+    	[ restart-ms TIME-MS ]
+    	[ restart ]
+
+    	Where: BITRATE       := { 1..1000000 }
+    	       SAMPLE-POINT  := { 0.000..0.999 }
+    	       TQ            := { NUMBER }
+    	       PROP-SEG      := { 1..8 }
+    	       PHASE-SEG1    := { 1..8 }
+    	       PHASE-SEG2    := { 1..8 }
+    	       SJW           := { 1..4 }
+    	       RESTART-MS    := { 0 | NUMBER }
+
+  - Display CAN device details and statistics:
+
+    $ ip -details -statistics link show can0
+    2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UP qlen 10
+      link/can
+      can <TRIPLE-SAMPLING> state ERROR-ACTIVE restart-ms 100
+      bitrate 125000 sample_point 0.875
+      tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
+      sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+      clock 8000000
+      re-started bus-errors arbit-lost error-warn error-pass bus-off
+      41         17457      0          41         42         41
+      RX: bytes  packets  errors  dropped overrun mcast
+      140859     17608    17457   0       0       0
+      TX: bytes  packets  errors  dropped carrier collsns
+      861        112      0       41      0       0
+
+  More info to the above output:
+
+    "<TRIPLE-SAMPLING>"
+	Shows the list of selected CAN controller modes: LOOPBACK,
+	LISTEN-ONLY, or TRIPLE-SAMPLING.
+
+    "state ERROR-ACTIVE"
+	The current state of the CAN controller: "ERROR-ACTIVE",
+	"ERROR-WARNING", "ERROR-PASSIVE", "BUS-OFF" or "STOPPED"
+
+    "restart-ms 100"
+	Automatic restart delay time. If set to a non-zero value, a
+	restart of the CAN controller will be triggered automatically
+	in case of a bus-off condition after the specified delay time
+	in milliseconds. By default it's off.
+
+    "bitrate 125000 sample_point 0.875"
+	Shows the real bit-rate in bits/sec and the sample-point in the
+	range 0.000..0.999. If the calculation of bit-timing parameters
+	is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the
+	bit-timing can be defined by setting the "bitrate" argument.
+	Optionally the "sample-point" can be specified. By default it's
+	0.000 assuming CIA-recommended sample-points.
+
+    "tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1"
+	Shows the time quanta in ns, propagation segment, phase buffer
+	segment 1 and 2 and the synchronisation jump width in units of
+	tq. They allow to define the CAN bit-timing in a hardware
+	independent format as proposed by the Bosch CAN 2.0 spec (see
+	chapter 8 of http://www.semiconductors.bosch.de/pdf/can2spec.pdf).
+
+    "sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+     clock 8000000"
+	Shows the bit-timing constants of the CAN controller, here the
+	"sja1000". The minimum and maximum values of the time segment 1
+	and 2, the synchronisation jump width in units of tq, the
+	bitrate pre-scaler and the CAN system clock frequency in Hz.
+	These constants could be used for user-defined (non-standard)
+	bit-timing calculation algorithms in user-space.
+
+    "re-started bus-errors arbit-lost error-warn error-pass bus-off"
+	Shows the number of restarts, bus and arbitration lost errors,
+	and the state changes to the error-warning, error-passive and
+	bus-off state. RX overrun errors are listed in the "overrun"
+	field of the standard network statistics.
+
+  6.5.2 Setting the CAN bit-timing
+
+  The CAN bit-timing parameters can always be defined in a hardware
+  independent format as proposed in the Bosch CAN 2.0 specification
+  specifying the arguments "tq", "prop_seg", "phase_seg1", "phase_seg2"
+  and "sjw":
+
+    $ ip link set canX type can tq 125 prop-seg 6 \
+				phase-seg1 7 phase-seg2 2 sjw 1
+
+  If the kernel option CONFIG_CAN_CALC_BITTIMING is enabled, CIA
+  recommended CAN bit-timing parameters will be calculated if the bit-
+  rate is specified with the argument "bitrate":
+
+    $ ip link set canX type can bitrate 125000
+
+  Note that this works fine for the most common CAN controllers with
+  standard bit-rates but may *fail* for exotic bit-rates or CAN system
+  clock frequencies. Disabling CONFIG_CAN_CALC_BITTIMING saves some
+  space and allows user-space tools to solely determine and set the
+  bit-timing parameters. The CAN controller specific bit-timing
+  constants can be used for that purpose. They are listed by the
+  following command:
+
+    $ ip -details link show can0
+    ...
+      sja1000: clock 8000000 tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+
+  6.5.3 Starting and stopping the CAN network device
+
+  A CAN network device is started or stopped as usual with the command
+  "ifconfig canX up/down" or "ip link set canX up/down". Be aware that
+  you *must* define proper bit-timing parameters for real CAN devices
+  before you can start it to avoid error-prone default settings:
+
+    $ ip link set canX up type can bitrate 125000
+
+  A device may enter the "bus-off" state if too much errors occurred on
+  the CAN bus. Then no more messages are received or sent. An automatic
+  bus-off recovery can be enabled by setting the "restart-ms" to a
+  non-zero value, e.g.:
+
+    $ ip link set canX type can restart-ms 100
+
+  Alternatively, the application may realize the "bus-off" condition
+  by monitoring CAN error frames and do a restart when appropriate with
+  the command:
+
+    $ ip link set canX type can restart
+
+  Note that a restart will also create a CAN error frame (see also
+  chapter 3.4).
 
-  On the project website http://developer.berlios.de/projects/socketcan
-  there are different drivers available:
+  6.6 Supported CAN hardware
 
-    vcan:    Virtual CAN interface driver (if no real hardware is available)
-    sja1000: Philips SJA1000 CAN controller (recommended)
-    i82527:  Intel i82527 CAN controller
-    mscan:   Motorola/Freescale CAN controller (e.g. inside SOC MPC5200)
-    ccan:    CCAN controller core (e.g. inside SOC h7202)
-    slcan:   For a bunch of CAN adaptors that are attached via a
-             serial line ASCII protocol (for serial / USB adaptors)
+  Please check the "Kconfig" file in "drivers/net/can" to get an actual
+  list of the support CAN hardware. On the Socket CAN project website
+  (see chapter 7) there might be further drivers available, also for
+  older kernel versions.
 
-  Additionally the different CAN adaptors (ISA/PCI/PCMCIA/USB/Parport)
-  from PEAK Systemtechnik support the CAN netdevice driver model
-  since Linux driver v6.0: http://www.peak-system.com/linux/index.htm
+7. Socket CAN resources
+-----------------------
 
-  Please check the Mailing Lists on the berlios OSS project website.
+  You can find further resources for Socket CAN like user space tools,
+  support for old kernel versions, more drivers, mailing lists, etc.
+  at the BerliOS OSS project website for Socket CAN:
 
-  6.6 todo
+    http://developer.berlios.de/projects/socketcan
 
-  The configuration interface for CAN network drivers is still an open
-  issue that has not been finalized in the socketcan project. Also the
-  idea of having a library module (candev.ko) that holds functions
-  that are needed by all CAN netdevices is not ready to ship.
-  Your contribution is welcome.
+  If you have questions, bug fixes, etc., don't hesitate to post them to
+  the Socketcan-Users mailing list. But please search the archives first.
 
-7. Credits
+8. Credits
 ----------
 
-  Oliver Hartkopp (PF_CAN core, filters, drivers, bcm)
+  Oliver Hartkopp (PF_CAN core, filters, drivers, bcm, SJA1000 driver)
   Urs Thuermann (PF_CAN core, kernel integration, socket interfaces, raw, vcan)
   Jan Kizka (RT-SocketCAN core, Socket-API reconciliation)
-  Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews)
+  Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews,
+                       CAN device driver interface, MSCAN driver)
   Robert Schwebel (design reviews, PTXdist integration)
   Marc Kleine-Budde (design reviews, Kernel 2.6 cleanups, drivers)
   Benedikt Spranger (reviews)
   Thomas Gleixner (LKML reviews, coding style, posting hints)
-  Andrey Volkov (kernel subtree structure, ioctls, mscan driver)
+  Andrey Volkov (kernel subtree structure, ioctls, MSCAN driver)
   Matthias Brukner (first SJA1000 CAN netdevice implementation Q2/2003)
   Klaus Hitschler (PEAK driver integration)
   Uwe Koppe (CAN netdevices with PF_PACKET approach)
   Michael Schulze (driver layer loopback requirement, RT CAN drivers review)
+  Pavel Pisa (Bit-timing calculation)
+  Sascha Hauer (SJA1000 platform driver)
+  Sebastian Haas (SJA1000 EMS PCI driver)
+  Markus Plessing (SJA1000 EMS PCI driver)
+  Per Dalen (SJA1000 Kvaser PCI driver)
+  Sam Ravnborg (reviews, coding style, kbuild help)

Documentation/networking/ieee802154.txt

@@ -0,0 +1,76 @@
+
+		Linux IEEE 802.15.4 implementation
+
+
+Introduction
+============
+
+The Linux-ZigBee project goal is to provide complete implementation
+of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack
+of protocols for organizing Low-Rate Wireless Personal Area Networks.
+
+Currently only IEEE 802.15.4 layer is implemented. We have choosen
+to use plain Berkeley socket API, the generic Linux networking stack
+to transfer IEEE 802.15.4 messages and a special protocol over genetlink
+for configuration/management
+
+
+Socket API
+==========
+
+int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0);
+.....
+
+The address family, socket addresses etc. are defined in the
+include/net/ieee802154/af_ieee802154.h header or in the special header
+in our userspace package (see either linux-zigbee sourceforge download page
+or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee).
+
+One can use SOCK_RAW for passing raw data towards device xmit function. YMMV.
+
+
+MLME - MAC Level Management
+============================
+
+Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
+See the include/net/ieee802154/nl802154.h header. Our userspace tools package
+(see above) provides CLI configuration utility for radio interfaces and simple
+coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
+
+
+Kernel side
+=============
+
+Like with WiFi, there are several types of devices implementing IEEE 802.15.4.
+1) 'HardMAC'. The MAC layer is implemented in the device itself, the device
+   exports MLME and data API.
+2) 'SoftMAC' or just radio. These types of devices are just radio transceivers
+   possibly with some kinds of acceleration like automatic CRC computation and
+   comparation, automagic ACK handling, address matching, etc.
+
+Those types of devices require different approach to be hooked into Linux kernel.
+
+
+HardMAC
+=======
+
+See the header include/net/ieee802154/netdevice.h. You have to implement Linux
+net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family
+code via plain sk_buffs. The control block of sk_buffs will contain additional
+info as described in the struct ieee802154_mac_cb.
+
+To hook the MLME interface you have to populate the ml_priv field of your
+net_device with a pointer to struct ieee802154_mlme_ops instance. All fields are
+required.
+
+We provide an example of simple HardMAC driver at drivers/ieee802154/fakehard.c
+
+
+SoftMAC
+=======
+
+We are going to provide intermediate layer impelementing IEEE 802.15.4 MAC
+in software. This is currently WIP.
+
+See header include/net/ieee802154/mac802154.h and several drivers in
+drivers/ieee802154/

Documentation/networking/ip-sysctl.txt

@@ -168,7 +168,16 @@ tcp_dsack - BOOLEAN
 	Allows TCP to send "duplicate" SACKs.
 
 tcp_ecn - BOOLEAN
-	Enable Explicit Congestion Notification in TCP.
+	Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
+	used when both ends of the TCP flow support it. It is useful to
+	avoid losses due to congestion (when the bottleneck router supports
+	ECN).
+	Possible values are:
+		0 disable ECN
+		1 ECN enabled
+		2 Only server-side ECN enabled. If the other end does
+		  not support ECN, behavior is like with ECN disabled.
+	Default: 2
 
 tcp_fack - BOOLEAN
 	Enable FACK congestion avoidance and fast retransmission.
@@ -1048,6 +1057,13 @@ disable_ipv6 - BOOLEAN
 	address.
 	Default: FALSE (enable IPv6 operation)
 
+	When this value is changed from 1 to 0 (IPv6 is being enabled),
+	it will dynamically create a link-local address on the given
+	interface and start Duplicate Address Detection, if necessary.
+
+	When this value is changed from 0 to 1 (IPv6 is being disabled),
+	it will dynamically delete all address on the given interface.
+
 accept_dad - INTEGER
 	Whether to accept DAD (Duplicate Address Detection).
 	0: Disable DAD

Documentation/networking/ipv6.txt

@@ -33,3 +33,40 @@ disable
 
 		A reboot is required to enable IPv6.
 
+autoconf
+
+	Specifies whether to enable IPv6 address autoconfiguration
+	on all interfaces.  This might be used when one does not wish
+	for addresses to be automatically generated from prefixes
+	received in Router Advertisements.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 address autoconfiguration is disabled on all interfaces.
+
+		Only the IPv6 loopback address (::1) and link-local addresses
+		will be added to interfaces.
+
+	1
+		IPv6 address autoconfiguration is enabled on all interfaces.
+
+		This is the default value.
+
+disable_ipv6
+
+	Specifies whether to disable IPv6 on all interfaces.
+	This might be used when no IPv6 addresses are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled on all interfaces.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled on all interfaces.
+
+		No IPv6 addresses will be added to interfaces.
+

Documentation/networking/mac80211-injection.txt

@@ -12,38 +12,22 @@ following format:
 The radiotap format is discussed in
 ./Documentation/networking/radiotap-headers.txt.
 
-Despite 13 radiotap argument types are currently defined, most only make sense
+Despite many radiotap parameters being currently defined, most only make sense
 to appear on received packets.  The following information is parsed from the
 radiotap headers and used to control injection:
 
- * IEEE80211_RADIOTAP_RATE
-
-   rate in 500kbps units, automatic if invalid or not present
-
-
- * IEEE80211_RADIOTAP_ANTENNA
-
-   antenna to use, automatic if not present
-
-
- * IEEE80211_RADIOTAP_DBM_TX_POWER
-
-   transmit power in dBm, automatic if not present
-
-
  * IEEE80211_RADIOTAP_FLAGS
 
    IEEE80211_RADIOTAP_F_FCS: FCS will be removed and recalculated
    IEEE80211_RADIOTAP_F_WEP: frame will be encrypted if key available
    IEEE80211_RADIOTAP_F_FRAG: frame will be fragmented if longer than the
-			      current fragmentation threshold. Note that
-			      this flag is only reliable when software
-			      fragmentation is enabled)
+			      current fragmentation threshold.
+
 
 The injection code can also skip all other currently defined radiotap fields
 facilitating replay of captured radiotap headers directly.
 
-Here is an example valid radiotap header defining these three parameters
+Here is an example valid radiotap header defining some parameters
 
 	0x00, 0x00, // <-- radiotap version
 	0x0b, 0x00, // <- radiotap header length
@@ -72,8 +56,8 @@ interface), along the following lines:
 ...
 	r = pcap_inject(ppcap, u8aSendBuffer, nLength);
 
-You can also find sources for a complete inject test applet here:
+You can also find a link to a complete inject application here:
 
-http://penumbra.warmcat.com/_twk/tiki-index.php?page=packetspammer
+http://wireless.kernel.org/en/users/Documentation/packetspammer
 
 Andy Green <andy@warmcat.com>

Documentation/networking/operstates.txt

@@ -38,9 +38,6 @@ ifinfomsg::if_flags & IFF_LOWER_UP:
 ifinfomsg::if_flags & IFF_DORMANT:
  Driver has signaled netif_dormant_on()
 
-These interface flags can also be queried without netlink using the
-SIOCGIFFLAGS ioctl.
-
 TLV IFLA_OPERSTATE
 
 contains RFC2863 state of the interface in numeric representation:

Documentation/networking/packet_mmap.txt

@@ -4,16 +4,18 @@
 
 This file documents the CONFIG_PACKET_MMAP option available with the PACKET
 socket interface on 2.4 and 2.6 kernels. This type of sockets is used for 
-capture network traffic with utilities like tcpdump or any other that uses 
-the libpcap library. 
-
-You can find the latest version of this document at
+capture network traffic with utilities like tcpdump or any other that needs
+raw access to network interface.
 
+You can find the latest version of this document at:
     http://pusa.uv.es/~ulisses/packet_mmap/
 
-Please send me your comments to
+Howto can be found at:
+    http://wiki.gnu-log.net (packet_mmap)
 
+Please send your comments to
     Ulisses Alonso Camaró <uaca@i.hate.spam.alumni.uv.es>
+    Johann Baudy <johann.baudy@gnu-log.net>
 
 -------------------------------------------------------------------------------
 + Why use PACKET_MMAP
@@ -25,19 +27,24 @@ to capture each packet, it requires two if you want to get packet's
 timestamp (like libpcap always does).
 
 In the other hand PACKET_MMAP is very efficient. PACKET_MMAP provides a size 
-configurable circular buffer mapped in user space. This way reading packets just 
-needs to wait for them, most of the time there is no need to issue a single 
-system call. By using a shared buffer between the kernel and the user 
-also has the benefit of minimizing packet copies.
-
-It's fine to use PACKET_MMAP to improve the performance of the capture process, 
-but it isn't everything. At least, if you are capturing at high speeds (this 
-is relative to the cpu speed), you should check if the device driver of your 
-network interface card supports some sort of interrupt load mitigation or 
-(even better) if it supports NAPI, also make sure it is enabled.
+configurable circular buffer mapped in user space that can be used to either
+send or receive packets. This way reading packets just needs to wait for them,
+most of the time there is no need to issue a single system call. Concerning
+transmission, multiple packets can be sent through one system call to get the
+highest bandwidth.
+By using a shared buffer between the kernel and the user also has the benefit
+of minimizing packet copies.
+
+It's fine to use PACKET_MMAP to improve the performance of the capture and
+transmission process, but it isn't everything. At least, if you are capturing
+at high speeds (this is relative to the cpu speed), you should check if the
+device driver of your network interface card supports some sort of interrupt
+load mitigation or (even better) if it supports NAPI, also make sure it is
+enabled. For transmission, check the MTU (Maximum Transmission Unit) used and
+supported by devices of your network.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP
++ How to use CONFIG_PACKET_MMAP to improve capture process
 --------------------------------------------------------------------------------
 
 From the user standpoint, you should use the higher level libpcap library, which
@@ -57,7 +64,7 @@ the low level details or want to improve libpcap by including PACKET_MMAP
 support.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP directly
++ How to use CONFIG_PACKET_MMAP directly to improve capture process
 --------------------------------------------------------------------------------
 
 From the system calls stand point, the use of PACKET_MMAP involves
@@ -66,6 +73,7 @@ the following process:
 
 [setup]     socket() -------> creation of the capture socket
             setsockopt() ---> allocation of the circular buffer (ring)
+                              option: PACKET_RX_RING
             mmap() ---------> mapping of the allocated buffer to the
                               user process
 
@@ -96,6 +104,65 @@ Next I will describe PACKET_MMAP settings and it's constraints,
 also the mapping of the circular buffer in the user process and 
 the use of this buffer.
 
+--------------------------------------------------------------------------------
++ How to use CONFIG_PACKET_MMAP directly to improve transmission process
+--------------------------------------------------------------------------------
+Transmission process is similar to capture as shown below.
+
+[setup]          socket() -------> creation of the transmission socket
+                 setsockopt() ---> allocation of the circular buffer (ring)
+                                   option: PACKET_TX_RING
+                 bind() ---------> bind transmission socket with a network interface
+                 mmap() ---------> mapping of the allocated buffer to the
+                                   user process
+
+[transmission]   poll() ---------> wait for free packets (optional)
+                 send() ---------> send all packets that are set as ready in
+                                   the ring
+                                   The flag MSG_DONTWAIT can be used to return
+                                   before end of transfer.
+
+[shutdown]  close() --------> destruction of the transmission socket and
+                              deallocation of all associated resources.
+
+Binding the socket to your network interface is mandatory (with zero copy) to
+know the header size of frames used in the circular buffer.
+
+As capture, each frame contains two parts:
+
+ --------------------
+| struct tpacket_hdr | Header. It contains the status of
+|                    | of this frame
+|--------------------|
+| data buffer        |
+.                    .  Data that will be sent over the network interface.
+.                    .
+ --------------------
+
+ bind() associates the socket to your network interface thanks to
+ sll_ifindex parameter of struct sockaddr_ll.
+
+ Initialization example:
+
+ struct sockaddr_ll my_addr;
+ struct ifreq s_ifr;
+ ...
+
+ strncpy (s_ifr.ifr_name, "eth0", sizeof(s_ifr.ifr_name));
+
+ /* get interface index of eth0 */
+ ioctl(this->socket, SIOCGIFINDEX, &s_ifr);
+
+ /* fill sockaddr_ll struct to prepare binding */
+ my_addr.sll_family = AF_PACKET;
+ my_addr.sll_protocol = ETH_P_ALL;
+ my_addr.sll_ifindex =  s_ifr.ifr_ifindex;
+
+ /* bind socket to eth0 */
+ bind(this->socket, (struct sockaddr *)&my_addr, sizeof(struct sockaddr_ll));
+
+ A complete tutorial is available at: http://wiki.gnu-log.net/
+
 --------------------------------------------------------------------------------
 + PACKET_MMAP settings
 --------------------------------------------------------------------------------
@@ -103,7 +170,10 @@ the use of this buffer.
 
 To setup PACKET_MMAP from user level code is done with a call like
 
+ - Capture process
      setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req))
+ - Transmission process
+     setsockopt(fd, SOL_PACKET, PACKET_TX_RING, (void *) &req, sizeof(req))
 
 The most significant argument in the previous call is the req parameter, 
 this parameter must to have the following structure:
@@ -117,11 +187,11 @@ this parameter must to have the following structure:
     };
 
 This structure is defined in /usr/include/linux/if_packet.h and establishes a 
-circular buffer (ring) of unswappable memory mapped in the capture process. 
+circular buffer (ring) of unswappable memory.
 Being mapped in the capture process allows reading the captured frames and 
 related meta-information like timestamps without requiring a system call.
 
-Captured frames are grouped in blocks. Each block is a physically contiguous 
+Frames are grouped in blocks. Each block is a physically contiguous
 region of memory and holds tp_block_size/tp_frame_size frames. The total number 
 of blocks is tp_block_nr. Note that tp_frame_nr is a redundant parameter because
 
@@ -336,6 +406,7 @@ struct tpacket_hdr). If this field is 0 means that the frame is ready
 to be used for the kernel, If not, there is a frame the user can read 
 and the following flags apply:
 
++++ Capture process:
      from include/linux/if_packet.h
 
      #define TP_STATUS_COPY          2 
@@ -391,6 +462,37 @@ packets are in the ring:
 It doesn't incur in a race condition to first check the status value and 
 then poll for frames.
 
+
+++ Transmission process
+Those defines are also used for transmission:
+
+     #define TP_STATUS_AVAILABLE        0 // Frame is available
+     #define TP_STATUS_SEND_REQUEST     1 // Frame will be sent on next send()
+     #define TP_STATUS_SENDING          2 // Frame is currently in transmission
+     #define TP_STATUS_WRONG_FORMAT     4 // Frame format is not correct
+
+First, the kernel initializes all frames to TP_STATUS_AVAILABLE. To send a
+packet, the user fills a data buffer of an available frame, sets tp_len to
+current data buffer size and sets its status field to TP_STATUS_SEND_REQUEST.
+This can be done on multiple frames. Once the user is ready to transmit, it
+calls send(). Then all buffers with status equal to TP_STATUS_SEND_REQUEST are
+forwarded to the network device. The kernel updates each status of sent
+frames with TP_STATUS_SENDING until the end of transfer.
+At the end of each transfer, buffer status returns to TP_STATUS_AVAILABLE.
+
+    header->tp_len = in_i_size;
+    header->tp_status = TP_STATUS_SEND_REQUEST;
+    retval = send(this->socket, NULL, 0, 0);
+
+The user can also use poll() to check if a buffer is available:
+(status == TP_STATUS_SENDING)
+
+    struct pollfd pfd;
+    pfd.fd = fd;
+    pfd.revents = 0;
+    pfd.events = POLLOUT;
+    retval = poll(&pfd, 1, timeout);
+
 --------------------------------------------------------------------------------
 + THANKS
 --------------------------------------------------------------------------------

Documentation/powerpc/dts-bindings/can/sja1000.txt

@@ -0,0 +1,53 @@
+Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+Required properties:
+
+- compatible : should be "nxp,sja1000".
+
+- reg : should specify the chip select, address offset and size required
+	to map the registers of the SJA1000. The size is usually 0x80.
+
+- interrupts: property with a value describing the interrupt source
+	(number and sensitivity) required for the SJA1000.
+
+Optional properties:
+
+- nxp,external-clock-frequency : Frequency of the external oscillator
+	clock in Hz. Note that the internal clock frequency used by the
+	SJA1000 is half of that value. If not specified, a default value
+	of 16000000 (16 MHz) is used.
+
+- nxp,tx-output-mode : operation mode of the TX output control logic:
+	<0x0> : bi-phase output mode
+	<0x1> : normal output mode (default)
+	<0x2> : test output mode
+	<0x3> : clock output mode
+
+- nxp,tx-output-config : TX output pin configuration:
+	<0x01> : TX0 invert
+	<0x02> : TX0 pull-down (default)
+	<0x04> : TX0 pull-up
+	<0x06> : TX0 push-pull
+	<0x08> : TX1 invert
+	<0x10> : TX1 pull-down
+	<0x20> : TX1 pull-up
+	<0x30> : TX1 push-pull
+
+- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
+	If not specified or if the specified value is 0, the CLKOUT pin
+	will be disabled.
+
+- nxp,no-comparator-bypass : Allows to disable the CAN input comperator.
+
+For futher information, please have a look to the SJA1000 data sheet.
+
+Examples:
+
+can@3,100 {
+	compatible = "nxp,sja1000";
+	reg = <3 0x100 0x80>;
+	interrupts = <2 0>;
+	interrupt-parent = <&mpic>;
+	nxp,external-clock-frequency = <16000000>;
+};
+

Documentation/rfkill.txt

@@ -1,575 +1,136 @@
-rfkill - RF switch subsystem support
-====================================
+rfkill - RF kill switch support
+===============================
 
-1 Introduction
-2 Implementation details
-3 Kernel driver guidelines
-3.1 wireless device drivers
-3.2 platform/switch drivers
-3.3 input device drivers
-4 Kernel API
-5 Userspace support
+1. Introduction
+2. Implementation details
+3. Kernel driver guidelines
+4. Kernel API
+5. Userspace support
 
 
-1. Introduction:
+1. Introduction
 
-The rfkill switch subsystem exists to add a generic interface to circuitry that
-can enable or disable the signal output of a wireless *transmitter* of any
-type.  By far, the most common use is to disable radio-frequency transmitters.
+The rfkill subsystem provides a generic interface to disabling any radio
+transmitter in the system. When a transmitter is blocked, it shall not
+radiate any power.
 
-Note that disabling the signal output means that the the transmitter is to be
-made to not emit any energy when "blocked".  rfkill is not about blocking data
-transmissions, it is about blocking energy emission.
+The subsystem also provides the ability to react on button presses and
+disable all transmitters of a certain type (or all). This is intended for
+situations where transmitters need to be turned off, for example on
+aircraft.
 
-The rfkill subsystem offers support for keys and switches often found on
-laptops to enable wireless devices like WiFi and Bluetooth, so that these keys
-and switches actually perform an action in all wireless devices of a given type
-attached to the system.
 
-The buttons to enable and disable the wireless transmitters are important in
-situations where the user is for example using his laptop on a location where
-radio-frequency transmitters _must_ be disabled (e.g. airplanes).
 
-Because of this requirement, userspace support for the keys should not be made
-mandatory.  Because userspace might want to perform some additional smarter
-tasks when the key is pressed, rfkill provides userspace the possibility to
-take over the task to handle the key events.
-
-===============================================================================
-2: Implementation details
+2. Implementation details
 
 The rfkill subsystem is composed of various components: the rfkill class, the
 rfkill-input module (an input layer handler), and some specific input layer
 events.
 
-The rfkill class provides kernel drivers with an interface that allows them to
-know when they should enable or disable a wireless network device transmitter.
-This is enabled by the CONFIG_RFKILL Kconfig option.
-
-The rfkill class support makes sure userspace will be notified of all state
-changes on rfkill devices through uevents.  It provides a notification chain
-for interested parties in the kernel to also get notified of rfkill state
-changes in other drivers.  It creates several sysfs entries which can be used
-by userspace.  See section "Userspace support".
-
-The rfkill-input module provides the kernel with the ability to implement a
-basic response when the user presses a key or button (or toggles a switch)
-related to rfkill functionality.  It is an in-kernel implementation of default
-policy of reacting to rfkill-related input events and neither mandatory nor
-required for wireless drivers to operate.  It is enabled by the
-CONFIG_RFKILL_INPUT Kconfig option.
-
-rfkill-input is a rfkill-related events input layer handler.  This handler will
-listen to all rfkill key events and will change the rfkill state of the
-wireless devices accordingly.  With this option enabled userspace could either
-do nothing or simply perform monitoring tasks.
-
-The rfkill-input module also provides EPO (emergency power-off) functionality
-for all wireless transmitters.  This function cannot be overridden, and it is
-always active.  rfkill EPO is related to *_RFKILL_ALL input layer events.
-
-
-Important terms for the rfkill subsystem:
-
-In order to avoid confusion, we avoid the term "switch" in rfkill when it is
-referring to an electronic control circuit that enables or disables a
-transmitter.  We reserve it for the physical device a human manipulates
-(which is an input device, by the way):
-
-rfkill switch:
-
-	A physical device a human manipulates.  Its state can be perceived by
-	the kernel either directly (through a GPIO pin, ACPI GPE) or by its
-	effect on a rfkill line of a wireless device.
-
-rfkill controller:
-
-	A hardware circuit that controls the state of a rfkill line, which a
-	kernel driver can interact with *to modify* that state (i.e. it has
-	either write-only or read/write access).
-
-rfkill line:
-
-	An input channel (hardware or software) of a wireless device, which
-	causes a wireless transmitter to stop emitting energy (BLOCK) when it
-	is active.  Point of view is extremely important here: rfkill lines are
-	always seen from the PoV of a wireless device (and its driver).
-
-soft rfkill line/software rfkill line:
-
-	A rfkill line the wireless device driver can directly change the state
-	of.  Related to rfkill_state RFKILL_STATE_SOFT_BLOCKED.
-
-hard rfkill line/hardware rfkill line:
-
-	A rfkill line that works fully in hardware or firmware, and that cannot
-	be overridden by the kernel driver.  The hardware device or the
-	firmware just exports its status to the driver, but it is read-only.
-	Related to rfkill_state RFKILL_STATE_HARD_BLOCKED.
-
-The enum rfkill_state describes the rfkill state of a transmitter:
-
-When a rfkill line or rfkill controller is in the RFKILL_STATE_UNBLOCKED state,
-the wireless transmitter (radio TX circuit for example) is *enabled*.  When the
-it is in the RFKILL_STATE_SOFT_BLOCKED or RFKILL_STATE_HARD_BLOCKED, the
-wireless transmitter is to be *blocked* from operating.
-
-RFKILL_STATE_SOFT_BLOCKED indicates that a call to toggle_radio() can change
-that state.  RFKILL_STATE_HARD_BLOCKED indicates that a call to toggle_radio()
-will not be able to change the state and will return with a suitable error if
-attempts are made to set the state to RFKILL_STATE_UNBLOCKED.
-
-RFKILL_STATE_HARD_BLOCKED is used by drivers to signal that the device is
-locked in the BLOCKED state by a hardwire rfkill line (typically an input pin
-that, when active, forces the transmitter to be disabled) which the driver
-CANNOT override.
-
-Full rfkill functionality requires two different subsystems to cooperate: the
-input layer and the rfkill class.  The input layer issues *commands* to the
-entire system requesting that devices registered to the rfkill class change
-state.  The way this interaction happens is not complex, but it is not obvious
-either:
-
-Kernel Input layer:
-
-	* Generates KEY_WWAN, KEY_WLAN, KEY_BLUETOOTH, SW_RFKILL_ALL, and
-	  other such events when the user presses certain keys, buttons, or
-	  toggles certain physical switches.
-
-	THE INPUT LAYER IS NEVER USED TO PROPAGATE STATUS, NOTIFICATIONS OR THE
-	KIND OF STUFF AN ON-SCREEN-DISPLAY APPLICATION WOULD REPORT.  It is
-	used to issue *commands* for the system to change behaviour, and these
-	commands may or may not be carried out by some kernel driver or
-	userspace application.  It follows that doing user feedback based only
-	on input events is broken, as there is no guarantee that an input event
-	will be acted upon.
-
-	Most wireless communication device drivers implementing rfkill
-	functionality MUST NOT generate these events, and have no reason to
-	register themselves with the input layer.  Doing otherwise is a common
-	misconception.  There is an API to propagate rfkill status change
-	information, and it is NOT the input layer.
-
-rfkill class:
-
-	* Calls a hook in a driver to effectively change the wireless
-	  transmitter state;
-	* Keeps track of the wireless transmitter state (with help from
-	  the driver);
-	* Generates userspace notifications (uevents) and a call to a
-	  notification chain (kernel) when there is a wireless transmitter
-	  state change;
-	* Connects a wireless communications driver with the common rfkill
-	  control system, which, for example, allows actions such as
-	  "switch all bluetooth devices offline" to be carried out by
-	  userspace or by rfkill-input.
-
-	THE RFKILL CLASS NEVER ISSUES INPUT EVENTS.  THE RFKILL CLASS DOES
-	NOT LISTEN TO INPUT EVENTS.  NO DRIVER USING THE RFKILL CLASS SHALL
-	EVER LISTEN TO, OR ACT ON RFKILL INPUT EVENTS.  Doing otherwise is
-	a layering violation.
-
-	Most wireless data communication drivers in the kernel have just to
-	implement the rfkill class API to work properly.  Interfacing to the
-	input layer is not often required (and is very often a *bug*) on
-	wireless drivers.
-
-	Platform drivers often have to attach to the input layer to *issue*
-	(but never to listen to) rfkill events for rfkill switches, and also to
-	the rfkill class to export a control interface for the platform rfkill
-	controllers to the rfkill subsystem.  This does NOT mean the rfkill
-	switch is attached to a rfkill class (doing so is almost always wrong).
-	It just means the same kernel module is the driver for different
-	devices (rfkill switches and rfkill controllers).
-
-
-Userspace input handlers (uevents) or kernel input handlers (rfkill-input):
-
-	* Implements the policy of what should happen when one of the input
-	  layer events related to rfkill operation is received.
-	* Uses the sysfs interface (userspace) or private rfkill API calls
-	  to tell the devices registered with the rfkill class to change
-	  their state (i.e. translates the input layer event into real
-	  action).
-
-	* rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0
-	  (power off all transmitters) in a special way: it ignores any
-	  overrides and local state cache and forces all transmitters to the
-	  RFKILL_STATE_SOFT_BLOCKED state (including those which are already
-	  supposed to be BLOCKED).
-	* rfkill EPO will remain active until rfkill-input receives an
-	  EV_SW SW_RFKILL_ALL 1 event.  While the EPO is active, transmitters
-	  are locked in the blocked state (rfkill will refuse to unblock them).
-	* rfkill-input implements different policies that the user can
-	  select for handling EV_SW SW_RFKILL_ALL 1.  It will unlock rfkill,
-	  and either do nothing (leave transmitters blocked, but now unlocked),
-	  restore the transmitters to their state before the EPO, or unblock
-	  them all.
-
-Userspace uevent handler or kernel platform-specific drivers hooked to the
-rfkill notifier chain:
-
-	* Taps into the rfkill notifier chain or to KOBJ_CHANGE uevents,
-	  in order to know when a device that is registered with the rfkill
-	  class changes state;
-	* Issues feedback notifications to the user;
-	* In the rare platforms where this is required, synthesizes an input
-	  event to command all *OTHER* rfkill devices to also change their
-	  statues when a specific rfkill device changes state.
-
-
-===============================================================================
-3: Kernel driver guidelines
-
-Remember: point-of-view is everything for a driver that connects to the rfkill
-subsystem.  All the details below must be measured/perceived from the point of
-view of the specific driver being modified.
-
-The first thing one needs to know is whether his driver should be talking to
-the rfkill class or to the input layer.  In rare cases (platform drivers), it
-could happen that you need to do both, as platform drivers often handle a
-variety of devices in the same driver.
-
-Do not mistake input devices for rfkill controllers.  The only type of "rfkill
-switch" device that is to be registered with the rfkill class are those
-directly controlling the circuits that cause a wireless transmitter to stop
-working (or the software equivalent of them), i.e. what we call a rfkill
-controller.  Every other kind of "rfkill switch" is just an input device and
-MUST NOT be registered with the rfkill class.
-
-A driver should register a device with the rfkill class when ALL of the
-following conditions are met (they define a rfkill controller):
-
-1. The device is/controls a data communications wireless transmitter;
-
-2. The kernel can interact with the hardware/firmware to CHANGE the wireless
-   transmitter state (block/unblock TX operation);
-
-3. The transmitter can be made to not emit any energy when "blocked":
-   rfkill is not about blocking data transmissions, it is about blocking
-   energy emission;
-
-A driver should register a device with the input subsystem to issue
-rfkill-related events (KEY_WLAN, KEY_BLUETOOTH, KEY_WWAN, KEY_WIMAX,
-SW_RFKILL_ALL, etc) when ALL of the folowing conditions are met:
-
-1. It is directly related to some physical device the user interacts with, to
-   command the O.S./firmware/hardware to enable/disable a data communications
-   wireless transmitter.
-
-   Examples of the physical device are: buttons, keys and switches the user
-   will press/touch/slide/switch to enable or disable the wireless
-   communication device.
-
-2. It is NOT slaved to another device, i.e. there is no other device that
-   issues rfkill-related input events in preference to this one.
-
-   Please refer to the corner cases and examples section for more details.
-
-When in doubt, do not issue input events.  For drivers that should generate
-input events in some platforms, but not in others (e.g. b43), the best solution
-is to NEVER generate input events in the first place.  That work should be
-deferred to a platform-specific kernel module (which will know when to generate
-events through the rfkill notifier chain) or to userspace.  This avoids the
-usual maintenance problems with DMI whitelisting.
-
-
-Corner cases and examples:
-====================================
-
-1. If the device is an input device that, because of hardware or firmware,
-causes wireless transmitters to be blocked regardless of the kernel's will, it
-is still just an input device, and NOT to be registered with the rfkill class.
-
-2. If the wireless transmitter switch control is read-only, it is an input
-device and not to be registered with the rfkill class (and maybe not to be made
-an input layer event source either, see below).
-
-3. If there is some other device driver *closer* to the actual hardware the
-user interacted with (the button/switch/key) to issue an input event, THAT is
-the device driver that should be issuing input events.
-
-E.g:
-  [RFKILL slider switch] -- [GPIO hardware] -- [WLAN card rf-kill input]
-                           (platform driver)    (wireless card driver)
-
-The user is closer to the RFKILL slide switch plaform driver, so the driver
-which must issue input events is the platform driver looking at the GPIO
-hardware, and NEVER the wireless card driver (which is just a slave).  It is
-very likely that there are other leaves than just the WLAN card rf-kill input
-(e.g. a bluetooth card, etc)...
-
-On the other hand, some embedded devices do this:
-
-  [RFKILL slider switch] -- [WLAN card rf-kill input]
-                             (wireless card driver)
-
-In this situation, the wireless card driver *could* register itself as an input
-device and issue rf-kill related input events... but in order to AVOID the need
-for DMI whitelisting, the wireless card driver does NOT do it.  Userspace (HAL)
-or a platform driver (that exists only on these embedded devices) will do the
-dirty job of issuing the input events.
-
-
-COMMON MISTAKES in kernel drivers, related to rfkill:
-====================================
-
-1. NEVER confuse input device keys and buttons with input device switches.
-
-  1a. Switches are always set or reset.  They report the current state
-      (on position or off position).
-
-  1b. Keys and buttons are either in the pressed or not-pressed state, and
-      that's it.  A "button" that latches down when you press it, and
-      unlatches when you press it again is in fact a switch as far as input
-      devices go.
-
-Add the SW_* events you need for switches, do NOT try to emulate a button using
-KEY_* events just because there is no such SW_* event yet.  Do NOT try to use,
-for example, KEY_BLUETOOTH when you should be using SW_BLUETOOTH instead.
-
-2. Input device switches (sources of EV_SW events) DO store their current state
-(so you *must* initialize it by issuing a gratuitous input layer event on
-driver start-up and also when resuming from sleep), and that state CAN be
-queried from userspace through IOCTLs.  There is no sysfs interface for this,
-but that doesn't mean you should break things trying to hook it to the rfkill
-class to get a sysfs interface :-)
-
-3. Do not issue *_RFKILL_ALL events by default, unless you are sure it is the
-correct event for your switch/button.  These events are emergency power-off
-events when they are trying to turn the transmitters off.  An example of an
-input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill
-switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch.
-An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by
-default, is any sort of hot key that is type-specific (e.g. the one for WLAN).
-
-
-3.1 Guidelines for wireless device drivers
-------------------------------------------
-
-(in this text, rfkill->foo means the foo field of struct rfkill).
-
-1. Each independent transmitter in a wireless device (usually there is only one
-transmitter per device) should have a SINGLE rfkill class attached to it.
-
-2. If the device does not have any sort of hardware assistance to allow the
-driver to rfkill the device, the driver should emulate it by taking all actions
-required to silence the transmitter.
-
-3. If it is impossible to silence the transmitter (i.e. it still emits energy,
-even if it is just in brief pulses, when there is no data to transmit and there
-is no hardware support to turn it off) do NOT lie to the users.  Do not attach
-it to a rfkill class.  The rfkill subsystem does not deal with data
-transmission, it deals with energy emission.  If the transmitter is emitting
-energy, it is not blocked in rfkill terms.
-
-4. It doesn't matter if the device has multiple rfkill input lines affecting
-the same transmitter, their combined state is to be exported as a single state
-per transmitter (see rule 1).
-
-This rule exists because users of the rfkill subsystem expect to get (and set,
-when possible) the overall transmitter rfkill state, not of a particular rfkill
-line.
-
-5. The wireless device driver MUST NOT leave the transmitter enabled during
-suspend and hibernation unless:
+The rfkill class is provided for kernel drivers to register their radio
+transmitter with the kernel, provide methods for turning it on and off and,
+optionally, letting the system know about hardware-disabled states that may
+be implemented on the device. This code is enabled with the CONFIG_RFKILL
+Kconfig option, which drivers can "select".
 
-	5.1. The transmitter has to be enabled for some sort of functionality
-	like wake-on-wireless-packet or autonomous packed forwarding in a mesh
-	network, and that functionality is enabled for this suspend/hibernation
-	cycle.
+The rfkill class code also notifies userspace of state changes, this is
+achieved via uevents. It also provides some sysfs files for userspace to
+check the status of radio transmitters. See the "Userspace support" section
+below.
 
-AND
 
-	5.2. The device was not on a user-requested BLOCKED state before
-	the suspend (i.e. the driver must NOT unblock a device, not even
-	to support wake-on-wireless-packet or remain in the mesh).
+The rfkill-input code implements a basic response to rfkill buttons -- it
+implements turning on/off all devices of a certain class (or all).
 
-In other words, there is absolutely no allowed scenario where a driver can
-automatically take action to unblock a rfkill controller (obviously, this deals
-with scenarios where soft-blocking or both soft and hard blocking is happening.
-Scenarios where hardware rfkill lines are the only ones blocking the
-transmitter are outside of this rule, since the wireless device driver does not
-control its input hardware rfkill lines in the first place).
+When the device is hard-blocked (either by a call to rfkill_set_hw_state()
+or from query_hw_block) set_block() will be invoked but drivers can well
+ignore the method call since they can use the return value of the function
+rfkill_set_hw_state() to sync the software state instead of keeping track
+of calls to set_block().
 
-6. During resume, rfkill will try to restore its previous state.
 
-7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio
-until it is resumed.
+The entire functionality is spread over more than one subsystem:
 
+ * The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and
+   SW_RFKILL_ALL -- when the user presses a button. Drivers for radio
+   transmitters generally do not register to the input layer, unless the
+   device really provides an input device (i.e. a button that has no
+   effect other than generating a button press event)
 
-Example of a WLAN wireless driver connected to the rfkill subsystem:
---------------------------------------------------------------------
+ * The rfkill-input code hooks up to these events and switches the soft-block
+   of the various radio transmitters, depending on the button type.
 
-A certain WLAN card has one input pin that causes it to block the transmitter
-and makes the status of that input pin available (only for reading!) to the
-kernel driver.  This is a hard rfkill input line (it cannot be overridden by
-the kernel driver).
+ * The rfkill drivers turn off/on their transmitters as requested.
 
-The card also has one PCI register that, if manipulated by the driver, causes
-it to block the transmitter.  This is a soft rfkill input line.
+ * The rfkill class will generate userspace notifications (uevents) to tell
+   userspace what the current state is.
 
-It has also a thermal protection circuitry that shuts down its transmitter if
-the card overheats, and makes the status of that protection available (only for
-reading!) to the kernel driver.  This is also a hard rfkill input line.
 
-If either one of these rfkill lines are active, the transmitter is blocked by
-the hardware and forced offline.
 
-The driver should allocate and attach to its struct device *ONE* instance of
-the rfkill class (there is only one transmitter).
+3. Kernel driver guidelines
 
-It can implement the get_state() hook, and return RFKILL_STATE_HARD_BLOCKED if
-either one of its two hard rfkill input lines are active.  If the two hard
-rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft
-rfkill input line is active.  Only if none of the rfkill input lines are
-active, will it return RFKILL_STATE_UNBLOCKED.
 
-Since the device has a hardware rfkill line, it IS subject to state changes
-external to rfkill.  Therefore, the driver must make sure that it calls
-rfkill_force_state() to keep the status always up-to-date, and it must do a
-rfkill_force_state() on resume from sleep.
+Drivers for radio transmitters normally implement only the rfkill class.
+These drivers may not unblock the transmitter based on own decisions, they
+should act on information provided by the rfkill class only.
 
-Every time the driver gets a notification from the card that one of its rfkill
-lines changed state (polling might be needed on badly designed cards that don't
-generate interrupts for such events), it recomputes the rfkill state as per
-above, and calls rfkill_force_state() to update it.
+Platform drivers might implement input devices if the rfkill button is just
+that, a button. If that button influences the hardware then you need to
+implement an rfkill class instead. This also applies if the platform provides
+a way to turn on/off the transmitter(s).
 
-The driver should implement the toggle_radio() hook, that:
+During suspend/hibernation, transmitters should only be left enabled when
+wake-on wlan or similar functionality requires it and the device wasn't
+blocked before suspend/hibernate. Note that it may be necessary to update
+the rfkill subsystem's idea of what the current state is at resume time if
+the state may have changed over suspend.
 
-1. Returns an error if one of the hardware rfkill lines are active, and the
-caller asked for RFKILL_STATE_UNBLOCKED.
 
-2. Activates the soft rfkill line if the caller asked for state
-RFKILL_STATE_SOFT_BLOCKED.  It should do this even if one of the hard rfkill
-lines are active, effectively double-blocking the transmitter.
 
-3. Deactivates the soft rfkill line if none of the hardware rfkill lines are
-active and the caller asked for RFKILL_STATE_UNBLOCKED.
-
-===============================================================================
-4: Kernel API
+4. Kernel API
 
 To build a driver with rfkill subsystem support, the driver should depend on
-(or select) the Kconfig symbol RFKILL; it should _not_ depend on RKFILL_INPUT.
+(or select) the Kconfig symbol RFKILL.
 
 The hardware the driver talks to may be write-only (where the current state
 of the hardware is unknown), or read-write (where the hardware can be queried
 about its current state).
 
-The rfkill class will call the get_state hook of a device every time it needs
-to know the *real* current state of the hardware.  This can happen often, but
-it does not do any polling, so it is not enough on hardware that is subject
-to state changes outside of the rfkill subsystem.
-
-Therefore, calling rfkill_force_state() when a state change happens is
-mandatory when the device has a hardware rfkill line, or when something else
-like the firmware could cause its state to be changed without going through the
-rfkill class.
-
-Some hardware provides events when its status changes.  In these cases, it is
-best for the driver to not provide a get_state hook, and instead register the
-rfkill class *already* with the correct status, and keep it updated using
-rfkill_force_state() when it gets an event from the hardware.
-
-rfkill_force_state() must be used on the device resume handlers to update the
-rfkill status, should there be any chance of the device status changing during
-the sleep.
-
-There is no provision for a statically-allocated rfkill struct.  You must
-use rfkill_allocate() to allocate one.
-
-You should:
-	- rfkill_allocate()
-	- modify rfkill fields (flags, name)
-	- modify state to the current hardware state (THIS IS THE ONLY TIME
-	  YOU CAN ACCESS state DIRECTLY)
-	- rfkill_register()
-
-The only way to set a device to the RFKILL_STATE_HARD_BLOCKED state is through
-a suitable return of get_state() or through rfkill_force_state().
+Calling rfkill_set_hw_state() when a state change happens is required from
+rfkill drivers that control devices that can be hard-blocked unless they also
+assign the poll_hw_block() callback (then the rfkill core will poll the
+device). Don't do this unless you cannot get the event in any other way.
 
-When a device is in the RFKILL_STATE_HARD_BLOCKED state, the only way to switch
-it to a different state is through a suitable return of get_state() or through
-rfkill_force_state().
 
-If toggle_radio() is called to set a device to state RFKILL_STATE_SOFT_BLOCKED
-when that device is already at the RFKILL_STATE_HARD_BLOCKED state, it should
-not return an error.  Instead, it should try to double-block the transmitter,
-so that its state will change from RFKILL_STATE_HARD_BLOCKED to
-RFKILL_STATE_SOFT_BLOCKED should the hardware blocking cease.
-
-Please refer to the source for more documentation.
-
-===============================================================================
-5: Userspace support
-
-rfkill devices issue uevents (with an action of "change"), with the following
-environment variables set:
-
-RFKILL_NAME
-RFKILL_STATE
-RFKILL_TYPE
 
-The ABI for these variables is defined by the sysfs attributes.  It is best
-to take a quick look at the source to make sure of the possible values.
+5. Userspace support
 
-It is expected that HAL will trap those, and bridge them to DBUS, etc.  These
-events CAN and SHOULD be used to give feedback to the user about the rfkill
-status of the system.
-
-Input devices may issue events that are related to rfkill.  These are the
-various KEY_* events and SW_* events supported by rfkill-input.c.
-
-******IMPORTANT******
-When rfkill-input is ACTIVE, userspace is NOT TO CHANGE THE STATE OF AN RFKILL
-SWITCH IN RESPONSE TO AN INPUT EVENT also handled by rfkill-input, unless it
-has set to true the user_claim attribute for that particular switch.  This rule
-is *absolute*; do NOT violate it.
-******IMPORTANT******
-
-Userspace must not assume it is the only source of control for rfkill switches.
-Their state CAN and WILL change due to firmware actions, direct user actions,
-and the rfkill-input EPO override for *_RFKILL_ALL.
-
-When rfkill-input is not active, userspace must initiate a rfkill status
-change by writing to the "state" attribute in order for anything to happen.
-
-Take particular care to implement EV_SW SW_RFKILL_ALL properly.  When that
-switch is set to OFF, *every* rfkill device *MUST* be immediately put into the
-RFKILL_STATE_SOFT_BLOCKED state, no questions asked.
-
-The following sysfs entries will be created:
+The following sysfs entries exist for every rfkill device:
 
 	name: Name assigned by driver to this key (interface or driver name).
 	type: Name of the key type ("wlan", "bluetooth", etc).
 	state: Current state of the transmitter
 		0: RFKILL_STATE_SOFT_BLOCKED
-			transmitter is forced off, but one can override it
-			by a write to the state attribute;
+			transmitter is turned off by software
 		1: RFKILL_STATE_UNBLOCKED
-			transmiter is NOT forced off, and may operate if
-			all other conditions for such operation are met
-			(such as interface is up and configured, etc);
+			transmitter is (potentially) active
 		2: RFKILL_STATE_HARD_BLOCKED
 			transmitter is forced off by something outside of
-			the driver's control.  One cannot set a device to
-			this state through writes to the state attribute;
-	claim: 1: Userspace handles events, 0: Kernel handles events
-
-Both the "state" and "claim" entries are also writable. For the "state" entry
-this means that when 1 or 0 is written, the device rfkill state (if not yet in
-the requested state), will be will be toggled accordingly.
-
-For the "claim" entry writing 1 to it means that the kernel no longer handles
-key events even though RFKILL_INPUT input was enabled. When "claim" has been
-set to 0, userspace should make sure that it listens for the input events or
-check the sysfs "state" entry regularly to correctly perform the required tasks
-when the rkfill key is pressed.
-
-A note about input devices and EV_SW events:
-
-In order to know the current state of an input device switch (like
-SW_RFKILL_ALL), you will need to use an IOCTL.  That information is not
-available through sysfs in a generic way at this time, and it is not available
-through the rfkill class AT ALL.
+			the driver's control.
+	claim: 0: Kernel handles events (currently always reads that value)
+
+rfkill devices also issue uevents (with an action of "change"), with the
+following environment variables set:
+
+RFKILL_NAME
+RFKILL_STATE
+RFKILL_TYPE
+
+The contents of these variables corresponds to the "name", "state" and
+"type" sysfs files explained above.
+
+An alternative userspace interface exists as a misc device /dev/rfkill,
+which allows userspace to obtain and set the state of rfkill devices and
+sets of devices. It also notifies userspace about device addition and
+removal. The API is a simple read/write API that is defined in
+linux/rfkill.h.

MAINTAINERS

@@ -157,9 +157,10 @@ S:	Maintained
 F:	drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
+P:	Alan Cox
+M:	alan@lxorguk.ukuu.org.uk
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-M:	alan@lxorguk.ukuu.org.uk
 S:	Odd Fixes
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
@@ -947,6 +948,12 @@ P:	Luis R. Rodriguez
 M:	lrodriguez@atheros.com
 P:	Jouni Malinen
 M:	jmalinen@atheros.com
+P:	Sujith Manoharan
+M:	Sujith.Manoharan@atheros.com
+P:	Vasanthakumar Thiagarajan
+M:	vasanth@atheros.com
+P:	Senthil Balasubramanian
+M:	senthilkumar@atheros.com
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 S:	Supported
@@ -1339,6 +1346,13 @@ F:	drivers/net/can/
 F:	include/linux/can/
 F:	include/linux/can.h
 
+CAN NETWORK DRIVERS
+P:	Wolfgang Grandegger
+M:	wg@grandegger.com
+L:	socketcan-core@lists.berlios.de (subscribers-only)
+W:	http://developer.berlios.de/projects/socketcan/
+S:	Maintained
+
 CELL BROADBAND ENGINE ARCHITECTURE
 P:	Arnd Bergmann
 M:	arnd@arndb.de
@@ -2843,6 +2857,18 @@ L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/ieee1394/raw1394*
 
+IEEE 802.15.4 SUBSYSTEM
+P:	Dmitry Eremin-Solenikov
+M:	dbaryshkov@gmail.com
+P:	Sergey Lapin
+M:	slapin@ossfans.org
+L:	linux-zigbee-devel@lists.sourceforge.net
+W:	http://apps.sourceforge.net/trac/linux-zigbee
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
+S:	Maintained
+F:	net/ieee802154/
+F:	drivers/ieee801254/
+
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 P:	Mimi Zohar
 M:	zohar@us.ibm.com
@@ -3136,6 +3162,7 @@ M:	samuel@sortiz.org
 L:	irda-users@lists.sourceforge.net (subscribers-only)
 W:	http://irda.sourceforge.net/
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/irda-2.6.git
 F:	Documentation/networking/irda.txt
 F:	drivers/net/irda/
 F:	include/net/irda/
@@ -4621,8 +4648,8 @@ S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-P:	Masakazu Mokuno
-M:	mokuno@sm.sony.co.jp
+P:	Geoff Levand
+M:	geoffrey.levand@am.sony.com
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
@@ -4823,7 +4850,7 @@ F:	drivers/net/r6040.c
 RDS - RELIABLE DATAGRAM SOCKETS
 P:	Andy Grover
 M:	andy.grover@oracle.com
-L:	rds-devel@oss.oracle.com
+L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/
 
@@ -4863,9 +4890,9 @@ S:	Supported
 F:	fs/reiserfs/
 
 RFKILL
-P:	Ivo van Doorn
-M:	IvDoorn@gmail.com
-L:	netdev@vger.kernel.org
+P:	Johannes Berg
+M:	johannes@sipsolutions.net
+L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F	Documentation/rfkill.txt
 F:	net/rfkill/

arch/alpha/include/asm/errno.h

@@ -120,4 +120,6 @@
 #define	EOWNERDEAD	136	/* Owner died */
 #define	ENOTRECOVERABLE	137	/* State not recoverable */
 
+#define	ERFKILL		138	/* Operation not possible due to RF-kill */
+
 #endif

arch/arm/kernel/signal.c

@@ -536,7 +536,7 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
 	return err;
 }
 
-static inline void restart_syscall(struct pt_regs *regs)
+static inline void setup_syscall_restart(struct pt_regs *regs)
 {
 	regs->ARM_r0 = regs->ARM_ORIG_r0;
 	regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
@@ -571,7 +571,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 			}
 			/* fallthrough */
 		case -ERESTARTNOINTR:
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 
@@ -695,7 +695,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 		if (regs->ARM_r0 == -ERESTARTNOHAND ||
 		    regs->ARM_r0 == -ERESTARTSYS ||
 		    regs->ARM_r0 == -ERESTARTNOINTR) {
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 	single_step_set(current);

arch/arm/mach-pxa/tosa-bt.c

@@ -35,21 +35,25 @@ static void tosa_bt_off(struct tosa_bt_data *data)
 	gpio_set_value(data->gpio_reset, 0);
 }
 
-static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+static int tosa_bt_set_block(void *data, bool blocked)
 {
-	pr_info("BT_RADIO going: %s\n",
-			state == RFKILL_STATE_ON ? "on" : "off");
+	pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on");
 
-	if (state == RFKILL_STATE_ON) {
+	if (!blocked) {
 		pr_info("TOSA_BT: going ON\n");
 		tosa_bt_on(data);
 	} else {
 		pr_info("TOSA_BT: going OFF\n");
 		tosa_bt_off(data);
 	}
+
 	return 0;
 }
 
+static const struct rfkill_ops tosa_bt_rfkill_ops = {
+	.set_block = tosa_bt_set_block,
+};
+
 static int tosa_bt_probe(struct platform_device *dev)
 {
 	int rc;
@@ -70,18 +74,14 @@ static int tosa_bt_probe(struct platform_device *dev)
 	if (rc)
 		goto err_pwr_dir;
 
-	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH,
+			   &tosa_bt_rfkill_ops, data);
 	if (!rfk) {
 		rc = -ENOMEM;
 		goto err_rfk_alloc;
 	}
 
-	rfk->name = "tosa-bt";
-	rfk->toggle_radio = tosa_bt_toggle_radio;
-	rfk->data = data;
-#ifdef CONFIG_RFKILL_LEDS
-	rfk->led_trigger.name = "tosa-bt";
-#endif
+	rfkill_set_led_trigger_name(rfk, "tosa-bt");
 
 	rc = rfkill_register(rfk);
 	if (rc)
@@ -92,9 +92,7 @@ static int tosa_bt_probe(struct platform_device *dev)
 	return 0;
 
 err_rfkill:
-	if (rfk)
-		rfkill_free(rfk);
-	rfk = NULL;
+	rfkill_destroy(rfk);
 err_rfk_alloc:
 	tosa_bt_off(data);
 err_pwr_dir:
@@ -113,8 +111,10 @@ static int __devexit tosa_bt_remove(struct platform_device *dev)
 
 	platform_set_drvdata(dev, NULL);
 
-	if (rfk)
+	if (rfk) {
 		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
 	rfk = NULL;
 
 	tosa_bt_off(data);

arch/arm/mach-pxa/tosa.c

@@ -31,7 +31,6 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
-#include <linux/rfkill.h>
 #include <linux/spi/spi.h>
 
 #include <asm/setup.h>

arch/avr32/kernel/signal.c

@@ -212,7 +212,7 @@ out:
 	return err;
 }
 
-static inline void restart_syscall(struct pt_regs *regs)
+static inline void setup_syscall_restart(struct pt_regs *regs)
 {
 	if (regs->r12 == -ERESTART_RESTARTBLOCK)
 		regs->r8 = __NR_restart_syscall;
@@ -296,7 +296,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall)
 			}
 			/* fall through */
 		case -ERESTARTNOINTR:
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 

arch/blackfin/Kconfig

@@ -6,59 +6,65 @@
 mainmenu "Blackfin Kernel Configuration"
 
 config MMU
-	bool
-	default n
+	def_bool n
 
 config FPU
-	bool
-	default n
+	def_bool n
 
 config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
+	def_bool y
 
 config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
+	def_bool n
 
 config BLACKFIN
-	bool
-	default y
+	def_bool y
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER
 	select HAVE_IDE
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
 config ZONE_DMA
-	bool
-	default y
+	def_bool y
 
 config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HWEIGHT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HARDIRQS
-	bool
-	default y
+	def_bool y
 
 config GENERIC_IRQ_PROBE
-	bool
-	default y
+	def_bool y
 
 config GENERIC_GPIO
-	bool
-	default y
+	def_bool y
 
 config FORCE_MAX_ZONEORDER
 	int
 	default "14"
 
 config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
 
 source "init/Kconfig"
 
@@ -408,12 +414,12 @@ comment "Clock/PLL Setup"
 
 config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
+	default "10000000" if BFIN532_IP0X
 	default "11059200" if BFIN533_STAMP
+	default "24576000" if PNAV10
+	default "25000000" # most people use this
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
 	default "30000000" if BFIN561_EZKIT
-	default "24576000" if PNAV10
-	default "10000000" if BFIN532_IP0X
 	help
 	  The frequency of CLKIN crystal oscillator on the board in Hz.
 	  Warning: This value should match the crystal on the board. Otherwise,

arch/blackfin/Makefile

@@ -137,7 +137,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage
+BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -150,7 +150,10 @@ install:
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
 
 define archhelp
-  echo  '* vmImage         - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)'
+  echo  '* vmImage         - Alias to selected kernel format (vmImage.gz by default)'
+  echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
+  echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
+  echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
   echo  '  install         - Install kernel using'
   echo  '                     (your) ~/bin/$(CROSS_COMPILE)installkernel or'
   echo  '                     (distribution) PATH: $(CROSS_COMPILE)installkernel or'

arch/blackfin/boot/.gitignore

@@ -1 +1,2 @@
-+vmImage
+vmImage*
+vmlinux*

arch/blackfin/boot/Makefile

@@ -8,24 +8,41 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage
-extra-y += vmlinux.bin vmlinux.gz
+targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-                   -C gzip -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+                   -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
                    -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
                    -d $< $@
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-$(obj)/vmImage: $(obj)/vmlinux.gz
-	$(call if_changed,uimage)
-	@$(kecho) 'Kernel: $@ is ready'
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+$(obj)/vmImage: $(obj)/vmImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
 
 install:
 	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"

arch/blackfin/include/asm/atomic.h

@@ -90,7 +90,7 @@ static inline int atomic_test_mask(int mask, atomic_t *v)
 
 static inline void atomic_add(int i, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter += i;
@@ -99,7 +99,7 @@ static inline void atomic_add(int i, atomic_t *v)
 
 static inline void atomic_sub(int i, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter -= i;
@@ -110,7 +110,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	int __temp = 0;
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter += i;
@@ -124,7 +124,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	int __temp = 0;
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter -= i;
@@ -136,7 +136,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 static inline void atomic_inc(volatile atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter++;
@@ -145,7 +145,7 @@ static inline void atomic_inc(volatile atomic_t *v)
 
 static inline void atomic_dec(volatile atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter--;
@@ -154,7 +154,7 @@ static inline void atomic_dec(volatile atomic_t *v)
 
 static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter &= ~mask;
@@ -163,7 +163,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 
 static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter |= mask;

arch/blackfin/include/asm/bfin-global.h

@@ -31,7 +31,7 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm-generic/sections.h>
+#include <asm/sections.h>
 #include <asm/ptrace.h>
 #include <asm/user.h>
 #include <linux/linkage.h>
@@ -99,15 +99,6 @@ extern const char bfin_board_name[];
 extern unsigned long bfin_sic_iwr[];
 extern unsigned vr_wakeup;
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
-extern unsigned long _ramstart, _ramend, _rambase;
-extern unsigned long memory_start, memory_end, physical_mem_end;
-extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
-	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
-	_ebss_l2[], _l2_lma_start[];
-
-/* only used when MTD_UCLINUX */
-extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
 
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 extern void cache_grab_lock(int way);

arch/blackfin/include/asm/bitops.h

@@ -109,7 +109,8 @@ static inline void clear_bit(int nr, volatile unsigned long *addr)
 
 static inline void change_bit(int nr, volatile unsigned long *addr)
 {
-	int mask, flags;
+	int mask;
+	unsigned long flags;
 	unsigned long *ADDR = (unsigned long *)addr;
 
 	ADDR += nr >> 5;

arch/blackfin/include/asm/bug.h

@@ -2,13 +2,58 @@
 #define _BLACKFIN_BUG_H
 
 #ifdef CONFIG_BUG
-#define HAVE_ARCH_BUG
 
-#define BUG() do { \
-	dump_bfin_trace_buffer(); \
-	printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-	panic("BUG!"); \
-} while (0)
+#define BFIN_BUG_OPCODE	0xefcd
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.long	%1\n"					\
+		"	.short	%2\n"					\
+		"	.short	%3\n"					\
+		"	.org	2b + %4\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(__FILE__),			\
+		  "i"(__LINE__), "i"(flags),				\
+		  "i"(sizeof(struct bug_entry)))
+
+#else
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.short	%1\n"					\
+		"	.org	2b + %2\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(flags),			\
+		  "i"(sizeof(struct bug_entry)))
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()								\
+	do {								\
+		_BUG_OR_WARN(0);					\
+		for (;;);						\
+	} while (0)
+
+#define WARN_ON(condition)							\
+	({								\
+		int __ret_warn_on = !!(condition);			\
+		if (unlikely(__ret_warn_on))				\
+			_BUG_OR_WARN(BUGFLAG_WARNING);			\
+		unlikely(__ret_warn_on);				\
+	})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
 
 #endif
 

arch/blackfin/include/asm/cache.h

@@ -34,9 +34,13 @@
 #define L1_CACHE_SHIFT_MAX	5
 
 #if defined(CONFIG_SMP) && \
-    !defined(CONFIG_BFIN_CACHE_COHERENT) && \
-    defined(CONFIG_BFIN_DCACHE)
-#define __ARCH_SYNC_CORE_DCACHE
+    !defined(CONFIG_BFIN_CACHE_COHERENT)
+# if defined(CONFIG_BFIN_ICACHE)
+# define __ARCH_SYNC_CORE_ICACHE
+# endif
+# if defined(CONFIG_BFIN_DCACHE)
+# define __ARCH_SYNC_CORE_DCACHE
+# endif
 #ifndef __ASSEMBLY__
 asmlinkage void __raw_smp_mark_barrier_asm(void);
 asmlinkage void __raw_smp_check_barrier_asm(void);
@@ -51,6 +55,7 @@ static inline void smp_check_barrier(void)
 }
 
 void resync_core_dcache(void);
+void resync_core_icache(void);
 #endif
 #endif
 

arch/blackfin/include/asm/cacheflush.h

@@ -37,6 +37,7 @@ extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned lo
 extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dflush_page(void *page);
 extern void blackfin_invalidate_entire_dcache(void);
+extern void blackfin_invalidate_entire_icache(void);
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -97,7 +98,7 @@ do { memcpy(dst, src, len);						\
 extern unsigned long reserved_mem_dcache_on;
 extern unsigned long reserved_mem_icache_on;
 
-static inline int bfin_addr_dcachable(unsigned long addr)
+static inline int bfin_addr_dcacheable(unsigned long addr)
 {
 #ifdef CONFIG_BFIN_DCACHE
 	if (addr < (_ramend - DMA_UNCACHED_REGION))

arch/blackfin/include/asm/cpu.h

@@ -34,6 +34,7 @@ struct blackfin_cpudata {
 	unsigned int dmemctl;
 	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
+	unsigned long icache_invld_count;
 };
 
 DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);

arch/blackfin/include/asm/ftrace.h

@@ -1 +1,13 @@
-/* empty */
+/*
+ * Blackfin ftrace code
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_FTRACE_H__
+#define __ASM_BFIN_FTRACE_H__
+
+#define MCOUNT_INSN_SIZE	8 /* sizeof mcount call: LINK + CALL */
+
+#endif

arch/blackfin/include/asm/ipipe.h

@@ -35,10 +35,10 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.9-01"
+#define IPIPE_ARCH_STRING     "1.10-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    9
-#define IPIPE_PATCH_NUMBER    1
+#define IPIPE_MINOR_NUMBER    10
+#define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
 #error "I-pipe/blackfin: SMP not implemented"
@@ -54,10 +54,11 @@ do {						\
 
 #define task_hijacked(p)						\
 	({								\
-		int __x__ = ipipe_current_domain != ipipe_root_domain;	\
-		/* We would need to clear the SYNC flag for the root domain */ \
-		/* over the current processor in SMP mode. */		\
-		local_irq_enable_hw(); __x__;				\
+		int __x__ = __ipipe_root_domain_p;			\
+		__clear_bit(IPIPE_SYNC_FLAG, &ipipe_root_cpudom_var(status)); \
+		if (__x__)						\
+			local_irq_enable_hw();				\
+		!__x__;							\
 	})
 
 struct ipipe_domain;
@@ -179,23 +180,24 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
-		if (ipd == ipipe_root_domain) {				\
+		if (!__ipipe_pipeline_head_p(ipd))			\
 			local_irq_enable_hw();				\
-			if (ipipe_virtual_irq_p(irq))			\
+		if (ipd == ipipe_root_domain) {				\
+			if (unlikely(ipipe_virtual_irq_p(irq))) {	\
+				irq_enter();				\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-			else						\
+				irq_exit();				\
+			} else 						\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
-			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
-			local_irq_enable_nohead(ipd);			\
 			ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
 			/* Attempt to exit the outer interrupt level before \
 			 * starting the deferred IRQ processing. */	\
-			local_irq_disable_nohead(ipd);			\
 			__ipipe_run_irqtail();				\
 			__set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 		}							\
+		local_irq_disable_hw();					\
 	} while (0)
 
 #define __ipipe_syscall_watched_p(p, sc)	\

arch/blackfin/include/asm/irq.h

@@ -17,270 +17,17 @@
 #ifndef _BFIN_IRQ_H_
 #define _BFIN_IRQ_H_
 
-/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
-#include <mach/irq.h>
-#include <asm/pda.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_SMP
-/* Forward decl needed due to cdef inter dependencies */
-static inline uint32_t __pure bfin_dspid(void);
-# define blackfin_core_id() (bfin_dspid() & 0xff)
-# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
-#else
-extern unsigned long bfin_irq_flags;
-#endif
-
-#ifdef CONFIG_IPIPE
-
-#include <linux/ipipe_trace.h>
+#include <linux/irqflags.h>
 
-void __ipipe_unstall_root(void);
-
-void __ipipe_restore_root(unsigned long flags);
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __all_masked_irq_flags 0x3f
-# define __save_and_cli_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d"(x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __all_masked_irq_flags 0x1f
-# define __save_and_cli_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d"(x) \
-	)
-#endif
-
-#define irqs_enabled_from_flags_hw(x)	((x) != __all_masked_irq_flags)
-#define raw_irqs_disabled_flags(flags)	(!irqs_enabled_from_flags_hw(flags))
-#define local_test_iflag_hw(x)		irqs_enabled_from_flags_hw(x)
-
-#define local_save_flags(x)					 \
-	do {							 \
-		(x) = __ipipe_test_root() ?			 \
-			__all_masked_irq_flags : bfin_irq_flags; \
-		barrier();					 \
-	} while (0)
-
-#define local_irq_save(x)					 \
-	do {						 	 \
-		(x) = __ipipe_test_and_stall_root() ?		 \
-			__all_masked_irq_flags : bfin_irq_flags; \
-		barrier();					 \
-	} while (0)
-
-static inline void local_irq_restore(unsigned long x)
-{
-	barrier();
-	__ipipe_restore_root(x == __all_masked_irq_flags);
-}
-
-#define local_irq_disable()			\
-	do {					\
-		__ipipe_stall_root();		\
-		barrier();			\
-	} while (0)
-
-static inline void local_irq_enable(void)
-{
-	barrier();
-	__ipipe_unstall_root();
-}
-
-#define irqs_disabled()		__ipipe_test_root()
-
-#define local_save_flags_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d"(x) \
-	)
-
-#define	irqs_disabled_hw()				\
-	({						\
-		unsigned long flags;			\
-		local_save_flags_hw(flags);		\
-		!irqs_enabled_from_flags_hw(flags);	\
-	})
-
-static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
-{
-	/* Merge virtual and real interrupt mask bits into a single
-	   32bit word. */
-	return (real & ~(1 << 31)) | ((virt != 0) << 31);
-}
-
-static inline int raw_demangle_irq_bits(unsigned long *x)
-{
-	int virt = (*x & (1 << 31)) != 0;
-	*x &= ~(1L << 31);
-	return virt;
-}
-
-#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
-
-#define local_irq_disable_hw()						\
-	do {								\
-		int _tmp_dummy;						\
-		if (!irqs_disabled_hw())				\
-			ipipe_trace_begin(0x80000000);			\
-		__asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : );	\
-	} while (0)
-
-#define local_irq_enable_hw()						\
-	do {								\
-		if (irqs_disabled_hw())					\
-			ipipe_trace_end(0x80000000);			\
-		__asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags));	\
-	} while (0)
-
-#define local_irq_save_hw(x)				\
-	do {						\
-		__save_and_cli_hw(x);			\
-		if (local_test_iflag_hw(x))		\
-			ipipe_trace_begin(0x80000001);	\
-	} while (0)
-
-#define local_irq_restore_hw(x)				\
-	do {						\
-		if (local_test_iflag_hw(x)) {		\
-			ipipe_trace_end(0x80000001);	\
-			local_irq_enable_hw_notrace();	\
-		}					\
-	} while (0)
-
-#define local_irq_disable_hw_notrace()					\
-	do {								\
-		int _tmp_dummy;						\
-		__asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : );	\
-	} while (0)
-
-#define local_irq_enable_hw_notrace() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d"(bfin_irq_flags) \
-	)
-
-#define local_irq_save_hw_notrace(x) __save_and_cli_hw(x)
-
-#define local_irq_restore_hw_notrace(x)			\
-	do {						\
-		if (local_test_iflag_hw(x))		\
-			local_irq_enable_hw_notrace();	\
-	} while (0)
-
-#else /* CONFIG_IPIPE_TRACE_IRQSOFF */
-
-#define local_irq_enable_hw() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d"(bfin_irq_flags) \
-	)
-
-#define local_irq_disable_hw()			\
-	do {					\
-		int _tmp_dummy;			\
-		__asm__ __volatile__ (		\
-			"cli %0;"		\
-			: "=d" (_tmp_dummy));	\
-	} while (0)
-
-#define local_irq_restore_hw(x) \
-	do { \
-		if (irqs_enabled_from_flags_hw(x)) \
-			local_irq_enable_hw(); \
-	} while (0)
-
-#define local_irq_save_hw(x)		__save_and_cli_hw(x)
-
-#define local_irq_disable_hw_notrace()	local_irq_disable_hw()
-#define local_irq_enable_hw_notrace()	local_irq_enable_hw()
-#define local_irq_save_hw_notrace(x)	local_irq_save_hw(x)
-#define local_irq_restore_hw_notrace(x)	local_irq_restore_hw(x)
-
-#endif  /* CONFIG_IPIPE_TRACE_IRQSOFF */
-
-#else /* !CONFIG_IPIPE */
-
-/*
- * Interrupt configuring macros.
- */
-#define local_irq_disable() \
-	do { \
-		int __tmp_dummy; \
-		__asm__ __volatile__( \
-			"cli %0;" \
-			: "=d" (__tmp_dummy) \
-		); \
-	} while (0)
-
-#define local_irq_enable() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d" (bfin_irq_flags) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d" (x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d" (x) \
-	)
-#endif
-
-#define local_save_flags(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d" (x) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
-#else
-#define irqs_enabled_from_flags(x) ((x) != 0x1f)
-#endif
-
-#define local_irq_restore(x) \
-	do { \
-		if (irqs_enabled_from_flags(x)) \
-			local_irq_enable(); \
-	} while (0)
-
-/* For spinlocks etc */
-#define local_irq_save(x) __save_and_cli(x)
-
-#define irqs_disabled()				\
-({						\
-	unsigned long flags;			\
-	local_save_flags(flags);		\
-	!irqs_enabled_from_flags(flags);	\
-})
-
-#define local_irq_save_hw(x)		local_irq_save(x)
-#define local_irq_restore_hw(x)		local_irq_restore(x)
-#define local_irq_enable_hw()		local_irq_enable()
-#define local_irq_disable_hw()		local_irq_disable()
-#define irqs_disabled_hw()		irqs_disabled()
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
+#include <mach/irq.h>
 
-#endif /* !CONFIG_IPIPE */
+/* Xenomai IPIPE helpers */
+#define local_irq_restore_hw(x) local_irq_restore(x)
+#define local_irq_save_hw(x)    local_irq_save(x)
+#define local_irq_enable_hw(x)  local_irq_enable(x)
+#define local_irq_disable_hw(x) local_irq_disable(x)
+#define irqs_disabled_hw(x)     irqs_disabled(x)
 
 #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
 # define NOP_PAD_ANOMALY_05000244 "nop; nop;"

arch/blackfin/include/asm/irqflags.h

@@ -0,0 +1,63 @@
+/*
+ * interface to Blackfin CEC
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_IRQFLAGS_H__
+#define __ASM_BFIN_IRQFLAGS_H__
+
+#ifdef CONFIG_SMP
+# include <asm/pda.h>
+# include <asm/processor.h>
+/* Forward decl needed due to cdef inter dependencies */
+static inline uint32_t __pure bfin_dspid(void);
+# define blackfin_core_id() (bfin_dspid() & 0xff)
+# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
+#else
+extern unsigned long bfin_irq_flags;
+#endif
+
+static inline void bfin_sti(unsigned long flags)
+{
+	asm volatile("sti %0;" : : "d" (flags));
+}
+
+static inline unsigned long bfin_cli(void)
+{
+	unsigned long flags;
+	asm volatile("cli %0;" : "=d" (flags));
+	return flags;
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	bfin_cli();
+}
+static inline void raw_local_irq_enable(void)
+{
+	bfin_sti(bfin_irq_flags);
+}
+
+#define raw_local_save_flags(flags) do { (flags) = bfin_read_IMASK(); } while (0)
+
+#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if (!raw_irqs_disabled_flags(flags))
+		raw_local_irq_enable();
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+	bfin_sti(0x3f);
+#endif
+	return flags;
+}
+#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif

arch/blackfin/include/asm/mutex-dec.h

@@ -1,112 +0,0 @@
-/*
- * include/asm-generic/mutex-dec.h
- *
- * Generic implementation of the mutex fastpath, based on atomic
- * decrement/increment.
- */
-#ifndef _ASM_GENERIC_MUTEX_DEC_H
-#define _ASM_GENERIC_MUTEX_DEC_H
-
-/**
- *  __mutex_fastpath_lock - try to take the lock by moving the count
- *                          from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function MUST leave the value lower than
- * 1 even when the "1" assertion wasn't true.
- */
-static inline void
-__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		fail_fn(count);
-	else
-		smp_mb();
-}
-
-/**
- *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
- *                                 from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
- * or anything the slow path function returns.
- */
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		return fail_fn(count);
-	else {
-		smp_mb();
-		return 0;
-	}
-}
-
-/**
- *  __mutex_fastpath_unlock - try to promote the count from 0 to 1
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 0
- *
- * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>.
- * In the failure case, this function is allowed to either set the value to
- * 1, or to set it to a value lower than 1.
- *
- * If the implementation sets it to a value of lower than 1, then the
- * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
- * to return 0 otherwise.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
-{
-	smp_mb();
-	if (unlikely(atomic_inc_return(count) <= 0))
-		fail_fn(count);
-}
-
-#define __mutex_slowpath_needs_to_unlock()		1
-
-/**
- * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
- *
- *  @count: pointer of type atomic_t
- *  @fail_fn: fallback function
- *
- * Change the count from 1 to a value lower than 1, and return 0 (failure)
- * if it wasn't 1 originally, or return 1 (success) otherwise. This function
- * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
- * Additionally, if the value was < 0 originally, this function must not leave
- * it to 0 on failure.
- *
- * If the architecture has no effective trylock variant, it should call the
- * <fail_fn> spinlock-based trylock variant unconditionally.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	/*
-	 * We have two variants here. The cmpxchg based one is the best one
-	 * because it never induce a false contention state.  It is included
-	 * here because architectures using the inc/dec algorithms over the
-	 * xchg ones are much more likely to support cmpxchg natively.
-	 *
-	 * If not we fall back to the spinlock based variant - that is
-	 * just as efficient (and simpler) as a 'destructive' probing of
-	 * the mutex state would be.
-	 */
-#ifdef __HAVE_ARCH_CMPXCHG
-	if (likely(atomic_cmpxchg(count, 1, 0) == 1)) {
-		smp_mb();
-		return 1;
-	}
-	return 0;
-#else
-	return fail_fn(count);
-#endif
-}
-
-#endif

arch/blackfin/include/asm/sections.h

@@ -4,4 +4,15 @@
 /* nothing to see, move along */
 #include <asm-generic/sections.h>
 
+/* only used when MTD_UCLINUX */
+extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+extern unsigned long _ramstart, _ramend, _rambase;
+extern unsigned long memory_start, memory_end, physical_mem_end;
+
+extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
+	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
+	_ebss_l2[], _l2_lma_start[];
+
 #endif

arch/blackfin/include/asm/system.h

@@ -35,10 +35,10 @@
 #define _BLACKFIN_SYSTEM_H
 
 #include <linux/linkage.h>
-#include <linux/compiler.h>
+#include <linux/irqflags.h>
 #include <mach/anomaly.h>
+#include <asm/cache.h>
 #include <asm/pda.h>
-#include <asm/processor.h>
 #include <asm/irq.h>
 
 /*

arch/blackfin/include/asm/unistd.h

@@ -380,8 +380,9 @@
 #define __NR_inotify_init1	365
 #define __NR_preadv		366
 #define __NR_pwritev		367
+#define __NR_rt_tgsigqueueinfo	368
 
-#define __NR_syscall		368
+#define __NR_syscall		369
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */

arch/blackfin/kernel/Makefile

@@ -15,6 +15,10 @@ else
     obj-y += time.o
 endif
 
+obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
+CFLAGS_REMOVE_ftrace.o = -pg
+
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
@@ -23,6 +27,7 @@ obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+obj-$(CONFIG_STACKTRACE)             += stacktrace.o
 
 # the kgdb test puts code into L2 and without linker
 # relaxation, we need to force long calls to/from it

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -453,10 +453,10 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 	unsigned long src = (unsigned long)psrc;
 	size_t bulk, rest;
 
-	if (bfin_addr_dcachable(src))
+	if (bfin_addr_dcacheable(src))
 		blackfin_dcache_flush_range(src, src + size);
 
-	if (bfin_addr_dcachable(dst))
+	if (bfin_addr_dcacheable(dst))
 		blackfin_dcache_invalidate_range(dst, dst + size);
 
 	bulk = size & ~0xffff;

arch/blackfin/kernel/bfin_ksyms.c

@@ -103,3 +103,8 @@ EXPORT_SYMBOL(__raw_smp_mark_barrier_asm);
 EXPORT_SYMBOL(__raw_smp_check_barrier_asm);
 #endif
 #endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+extern void _mcount(void);
+EXPORT_SYMBOL(_mcount);
+#endif

arch/blackfin/kernel/cplb-mpu/cplbmgr.c

@@ -151,7 +151,7 @@ static noinline int dcplb_miss(unsigned int cpu)
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
 #ifdef CONFIG_BFIN_DCACHE
-	if (bfin_addr_dcachable(addr)) {
+	if (bfin_addr_dcacheable(addr)) {
 		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #ifdef CONFIG_BFIN_WT
 		d_data |= CPLB_L1_AOW | CPLB_WT;

arch/blackfin/kernel/cplb-nompu/cplbmgr.c

@@ -28,6 +28,7 @@
 #include <asm/cplbinit.h>
 #include <asm/cplb.h>
 #include <asm/mmu_context.h>
+#include <asm/traps.h>
 
 /*
  * WARNING
@@ -100,28 +101,6 @@ static inline void write_icplb_data(int cpu, int idx, unsigned long data,
 #endif
 }
 
-/*
- * Given the contents of the status register, return the index of the
- * CPLB that caused the fault.
- */
-static inline int faulting_cplb_index(int status)
-{
-	int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF);
-	return 30 - signbits;
-}
-
-/*
- * Given the contents of the status register and the DCPLB_DATA contents,
- * return true if a write access should be permitted.
- */
-static inline int write_permitted(int status, unsigned long data)
-{
-	if (status & FAULT_USERSUPV)
-		return !!(data & CPLB_SUPV_WR);
-	else
-		return !!(data & CPLB_USER_WR);
-}
-
 /* Counters to implement round-robin replacement.  */
 static int icplb_rr_index[NR_CPUS] PDT_ATTR;
 static int dcplb_rr_index[NR_CPUS] PDT_ATTR;
@@ -245,43 +224,16 @@ MGR_ATTR static int dcplb_miss(int cpu)
 	return CPLB_RELOADED;
 }
 
-MGR_ATTR static noinline int dcplb_protection_fault(int cpu)
-{
-	int status = bfin_read_DCPLB_STATUS();
-
-	nr_dcplb_prot[cpu]++;
-
-	if (likely(status & FAULT_RW)) {
-		int idx = faulting_cplb_index(status);
-		unsigned long regaddr = DCPLB_DATA0 + idx * 4;
-		unsigned long data = bfin_read32(regaddr);
-
-		/* Check if fault is to dirty a clean page */
-		if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) &&
-		    write_permitted(status, data)) {
-
-			dcplb_tbl[cpu][idx].data = data;
-			bfin_write32(regaddr, data);
-			return CPLB_RELOADED;
-		}
-	}
-
-	return CPLB_PROT_VIOL;
-}
-
 MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
 	unsigned int cpu = smp_processor_id();
 	switch (cause) {
-	case 0x2C:
+	case VEC_CPLB_I_M:
 		return icplb_miss(cpu);
-	case 0x26:
+	case VEC_CPLB_M:
 		return dcplb_miss(cpu);
 	default:
-		if (unlikely(cause == 0x23))
-			return dcplb_protection_fault(cpu);
-
 		return CPLB_UNKNOWN_ERR;
 	}
 }

arch/blackfin/kernel/early_printk.c

@@ -202,11 +202,15 @@ asmlinkage void __init init_early_exception_vectors(void)
 asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
 {
 	/* This can happen before the uart is initialized, so initialize
-	 * the UART now
+	 * the UART now (but only if we are running on the processor we think
+	 * we are compiled for - otherwise we write to MMRs that don't exist,
+	 * and cause other problems. Nothing comes out the UART, but it does
+	 * end up in the __buf_log.
 	 */
-	if (likely(early_console == NULL))
+	if (likely(early_console == NULL) && CPUID == bfin_cpuid())
 		setup_early_printk(DEFAULT_EARLY_PORT);
 
+	printk(KERN_EMERG "Early panic\n");
 	dump_bfin_mem(fp);
 	show_regs(fp);
 	dump_bfin_trace_buffer();

arch/blackfin/kernel/ftrace-entry.S

@@ -0,0 +1,140 @@
+/*
+ * mcount and friends -- ftrace stuff
+ *
+ * Copyright (C) 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ftrace.h>
+
+.text
+
+/* GCC will have called us before setting up the function prologue, so we
+ * can clobber the normal scratch registers, but we need to make sure to
+ * save/restore the registers used for argument passing (R0-R2) in case
+ * the profiled function is using them.  With data registers, R3 is the
+ * only one we can blow away.  With pointer registers, we have P0-P2.
+ *
+ * Upon entry, the RETS will point to the top of the current profiled
+ * function.  And since GCC setup the frame for us, the previous function
+ * will be waiting there.  mmmm pie.
+ */
+ENTRY(__mcount)
+	/* save third function arg early so we can do testing below */
+	[--sp] = r2;
+
+	/* load the function pointer to the tracer */
+	p0.l = _ftrace_trace_function;
+	p0.h = _ftrace_trace_function;
+	r3 = [p0];
+
+	/* optional micro optimization: don't call the stub tracer */
+	r2.l = _ftrace_stub;
+	r2.h = _ftrace_stub;
+	cc = r2 == r3;
+	if ! cc jump .Ldo_trace;
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* if the ftrace_graph_return function pointer is not set to
+	 * the ftrace_stub entry, call prepare_ftrace_return().
+	 */
+	p0.l = _ftrace_graph_return;
+	p0.h = _ftrace_graph_return;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+
+	/* similarly, if the ftrace_graph_entry function pointer is not
+	 * set to the ftrace_graph_entry_stub entry, ...
+	 */
+	p0.l = _ftrace_graph_entry;
+	p0.h = _ftrace_graph_entry;
+	r2.l = _ftrace_graph_entry_stub;
+	r2.h = _ftrace_graph_entry_stub;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+#endif
+
+	r2 = [sp++];
+	rts;
+
+.Ldo_trace:
+
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* setup the tracer function */
+	p0 = r3;
+
+	/* tracer(ulong frompc, ulong selfpc):
+	 *  frompc: the pc that did the call to ...
+	 *  selfpc: ... this location
+	 * the selfpc itself will need adjusting for the mcount call
+	 */
+	r1 = rets;
+	r0 = [fp + 4];
+	r1 += -MCOUNT_INSN_SIZE;
+
+	/* call the tracer */
+	call (p0);
+
+	/* restore state and get out of dodge */
+.Lfinish_trace:
+	rets = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	r2 = [sp++];
+
+.globl _ftrace_stub
+_ftrace_stub:
+	rts;
+ENDPROC(__mcount)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/* The prepare_ftrace_return() function is similar to the trace function
+ * except it takes a pointer to the location of the frompc.  This is so
+ * the prepare_ftrace_return() can hijack it temporarily for probing
+ * purposes.
+ */
+ENTRY(_ftrace_graph_caller)
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	r0 = fp;
+	r1 = rets;
+	r0 += 4;
+	r1 += -MCOUNT_INSN_SIZE;
+	call _prepare_ftrace_return;
+
+	jump .Lfinish_trace;
+ENDPROC(_ftrace_graph_caller)
+
+/* Undo the rewrite caused by ftrace_graph_caller().  The common function
+ * ftrace_return_to_handler() will return the original rets so we can
+ * restore it and be on our way.
+ */
+ENTRY(_return_to_handler)
+	/* make sure original return values are saved */
+	[--sp] = p0;
+	[--sp] = r0;
+	[--sp] = r1;
+
+	/* get original return address */
+	call _ftrace_return_to_handler;
+	rets = r0;
+
+	/* anomaly 05000371 - make sure we have at least three instructions
+	 * between rets setting and the return
+	 */
+	r1 = [sp++];
+	r0 = [sp++];
+	p0 = [sp++];
+	rts;
+ENDPROC(_return_to_handler)
+#endif

arch/blackfin/kernel/ftrace.c

@@ -0,0 +1,42 @@
+/*
+ * ftrace graph code
+ *
+ * Copyright (C) 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/atomic.h>
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth) == -EBUSY)
+		return;
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		return;
+	}
+
+	/* all is well in the world !  hijack RETS ... */
+	*parent = return_hooker;
+}
+
+#endif

arch/blackfin/kernel/ipipe.c

@@ -99,7 +99,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 * interrupt.
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-	this_domain = ipipe_current_domain;
+	this_domain = __ipipe_current_domain;
 
 	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
 		head = &this_domain->p_link;
@@ -212,7 +212,9 @@ void __ipipe_unstall_root_raw(void)
 
 int __ipipe_syscall_root(struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p;
 	unsigned long flags;
+	int ret;
 
 	/*
 	 * We need to run the IRQ tail hook whenever we don't
@@ -231,29 +233,31 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 	/*
 	 * This routine either returns:
 	 * 0 -- if the syscall is to be passed to Linux;
-	 * 1 -- if the syscall should not be passed to Linux, and no
+	 * >0 -- if the syscall should not be passed to Linux, and no
 	 * tail work should be performed;
-	 * -1 -- if the syscall should not be passed to Linux but the
+	 * <0 -- if the syscall should not be passed to Linux but the
 	 * tail work has to be performed (for handling signals etc).
 	 */
 
-	if (__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL) &&
-	    __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs) > 0) {
-		if (ipipe_root_domain_p && !in_atomic()) {
-			/*
-			 * Sync pending VIRQs before _TIF_NEED_RESCHED
-			 * is tested.
-			 */
-			local_irq_save_hw(flags);
-			if ((ipipe_root_cpudom_var(irqpend_himask) & IPIPE_IRQMASK_VIRT) != 0)
-				__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
-			local_irq_restore_hw(flags);
-			return -1;
-		}
+	if (!__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL))
+		return 0;
+
+	ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs);
+
+	local_irq_save_hw(flags);
+
+	if (!__ipipe_root_domain_p) {
+		local_irq_restore_hw(flags);
 		return 1;
 	}
 
-	return 0;
+	p = ipipe_root_cpudom_ptr();
+	if ((p->irqpend_himask & IPIPE_IRQMASK_VIRT) != 0)
+		__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
+
+	local_irq_restore_hw(flags);
+
+	return -ret;
 }
 
 unsigned long ipipe_critical_enter(void (*syncfn) (void))
@@ -329,9 +333,7 @@ asmlinkage void __ipipe_sync_root(void)
 
 void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	struct ipipe_domain *ipd = ipipe_current_domain;
-
-	if (ipd == ipipe_root_domain) {
+	if (__ipipe_root_domain_p) {
 		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
 			return;
 	}

arch/blackfin/kernel/setup.c

@@ -1098,7 +1098,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			CPUID, bfin_cpuid());
 
 	seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
-		"stepping\t: %d\n",
+		"stepping\t: %d ",
 		cpu, cclk/1000000, sclk/1000000,
 #ifdef CONFIG_MPU
 		"mpu on",
@@ -1107,7 +1107,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #endif
 		revid);
 
-	seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
+	if (bfin_revid() != bfin_compiled_revid()) {
+		if (bfin_compiled_revid() == -1)
+			seq_printf(m, "(Compiled for Rev none)");
+		else if (bfin_compiled_revid() == 0xffff)
+			seq_printf(m, "(Compiled for Rev any)");
+		else
+			seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid());
+	}
+
+	seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
 		cclk/1000000, cclk%1000000,
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
@@ -1172,6 +1181,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #ifdef __ARCH_SYNC_CORE_DCACHE
 	seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
 #endif
+#ifdef __ARCH_SYNC_CORE_ICACHE
+	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
+#endif
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 	switch ((cpudata->imemctl >> 3) & WAYALL_L) {
 	case WAY0_L:

arch/blackfin/kernel/stacktrace.c

@@ -0,0 +1,53 @@
+/*
+ * Blackfin stacktrace code (mostly copied from avr32)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/module.h>
+
+register unsigned long current_frame_pointer asm("FP");
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long rets;
+};
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long low, high;
+	unsigned long fp;
+	struct stackframe *frame;
+	int skip = trace->skip;
+
+	low = (unsigned long)task_stack_page(current);
+	high = low + THREAD_SIZE;
+	fp = current_frame_pointer;
+
+	while (fp >= low && fp <= (high - sizeof(*frame))) {
+		frame = (struct stackframe *)fp;
+
+		if (skip) {
+			skip--;
+		} else {
+			trace->entries[trace->nr_entries++] = frame->rets;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+
+		/*
+		 * The next frame must be at a higher address than the
+		 * current frame.
+		 */
+		low = fp + sizeof(*frame);
+		fp = frame->fp;
+	}
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);

arch/blackfin/kernel/traps.c

@@ -27,6 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/bug.h>
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@@ -238,6 +239,11 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 
 }
 
+static int kernel_mode_regs(struct pt_regs *regs)
+{
+	return regs->ipend & 0xffc0;
+}
+
 asmlinkage void trap_c(struct pt_regs *fp)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
@@ -246,6 +252,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 	unsigned int cpu = smp_processor_id();
 #endif
+	const char *strerror = NULL;
 	int sig = 0;
 	siginfo_t info;
 	unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
@@ -259,27 +266,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	 * double faults if the stack has become corrupt
 	 */
 
-	/* If the fault was caused by a kernel thread, or interrupt handler
-	 * we will kernel panic, so the system reboots.
-	 * If KGDB is enabled, don't set this for kernel breakpoints
-	*/
-
-	/* TODO: check to see if we are in some sort of deferred HWERR
-	 * that we should be able to recover from, not kernel panic
-	 */
-	if ((bfin_read_IPEND() & 0xFFC0) && (trapnr != VEC_STEP)
-#ifdef CONFIG_KGDB
-		&& (trapnr != VEC_EXCPT02)
+#ifndef CONFIG_KGDB
+	/* IPEND is skipped if KGDB isn't enabled (see entry code) */
+	fp->ipend = bfin_read_IPEND();
 #endif
-	){
-		console_verbose();
-		oops_in_progress = 1;
-	} else if (current) {
-		if (current->mm == NULL) {
-			console_verbose();
-			oops_in_progress = 1;
-		}
-	}
 
 	/* trap_c() will be called for exceptions. During exceptions
 	 * processing, the pc value should be set with retx value.
@@ -307,15 +297,15 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a breakpoint in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 	/* 0x03 - User Defined, userspace stack overflow */
 	case VEC_EXCPT03:
 		info.si_code = SEGV_STACKFLOW;
 		sig = SIGSEGV;
-		verbose_printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x03(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x02 - KGDB initial connection and break signal trap */
@@ -324,7 +314,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		info.si_code = TRAP_ILLTRAP;
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP();
-		return;
+		goto traps_done;
 #endif
 	/* 0x04 - User Defined */
 	/* 0x05 - User Defined */
@@ -344,7 +334,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_EXCPT04 ... VEC_EXCPT15:
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x04(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x04(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x10 HW Single step, handled here */
@@ -353,15 +343,15 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a single step in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 	/* 0x11 - Trace Buffer Full, handled here */
 	case VEC_OVFLOW:
 		info.si_code = TRAP_TRACEFLOW;
 		sig = SIGTRAP;
-		verbose_printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x11(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x12 - Reserved, Caught by default */
@@ -381,37 +371,54 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	/* 0x20 - Reserved, Caught by default */
 	/* 0x21 - Undefined Instruction, handled here */
 	case VEC_UNDEF_I:
+#ifdef CONFIG_BUG
+		if (kernel_mode_regs(fp)) {
+			switch (report_bug(fp->pc, fp)) {
+			case BUG_TRAP_TYPE_NONE:
+				break;
+			case BUG_TRAP_TYPE_WARN:
+				dump_bfin_trace_buffer();
+				fp->pc += 2;
+				goto traps_done;
+			case BUG_TRAP_TYPE_BUG:
+				/* call to panic() will dump trace, and it is
+				 * off at this point, so it won't be clobbered
+				 */
+				panic("BUG()");
+			}
+		}
+#endif
 		info.si_code = ILL_ILLOPC;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x22 - Illegal Instruction Combination, handled here */
 	case VEC_ILGAL_I:
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x22(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x23 - Data CPLB protection violation, handled here */
 	case VEC_CPLB_VL:
 		info.si_code = ILL_CPLB_VI;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x24 - Data access misaligned, handled here */
 	case VEC_MISALI_D:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x24(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x25 - Unrecoverable Event, handled here */
 	case VEC_UNCOV:
 		info.si_code = ILL_ILLEXCPT;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x25(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
@@ -419,7 +426,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_CPLB_M:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x26(KERN_NOTICE);
 		break;
 	/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
 	case VEC_CPLB_MHIT:
@@ -427,10 +434,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "NULL pointer access\n");
+			strerror = KERN_NOTICE "NULL pointer access\n";
 		else
 #endif
-			verbose_printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+			strerror = KERN_NOTICE EXC_0x27(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x28 - Emulation Watchpoint, handled here */
@@ -440,8 +447,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		pr_debug(EXC_0x28(KERN_DEBUG));
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a watchpoint in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 #ifdef CONFIG_BF535
@@ -449,7 +456,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_ISTRU_VL:      /* ADSP-BF535 only (MH) */
 		info.si_code = BUS_OPFETCH;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
+		strerror = KERN_NOTICE "BF535: VEC_ISTRU_VL\n";
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 #else
@@ -459,21 +466,21 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_MISALI_I:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2A(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2B - Instruction CPLB protection violation, handled here */
 	case VEC_CPLB_I_VL:
 		info.si_code = ILL_CPLB_VI;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2B(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
 	case VEC_CPLB_I_M:
 		info.si_code = ILL_CPLB_MISS;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2C(KERN_NOTICE);
 		break;
 	/* 0x2D - Instruction CPLB Multiple Hits, handled here */
 	case VEC_CPLB_I_MHIT:
@@ -481,17 +488,17 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "Jump to NULL address\n");
+			strerror = KERN_NOTICE "Jump to NULL address\n";
 		else
 #endif
-			verbose_printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+			strerror = KERN_NOTICE EXC_0x2D(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2E - Illegal use of Supervisor Resource, handled here */
 	case VEC_ILL_RES:
 		info.si_code = ILL_PRVOPC;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2E(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2F - Reserved, Caught by default */
@@ -519,17 +526,17 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
 			info.si_code = BUS_ADRALN;
 			sig = SIGBUS;
-			verbose_printk(KERN_NOTICE HWC_x2(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x2(KERN_NOTICE);
 			break;
 		/* External Memory Addressing Error */
 		case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
 			info.si_code = BUS_ADRERR;
 			sig = SIGBUS;
-			verbose_printk(KERN_NOTICE HWC_x3(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x3(KERN_NOTICE);
 			break;
 		/* Performance Monitor Overflow */
 		case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
-			verbose_printk(KERN_NOTICE HWC_x12(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x12(KERN_NOTICE);
 			break;
 		/* RAISE 5 instruction */
 		case (SEQSTAT_HWERRCAUSE_RAISE_5):
@@ -546,7 +553,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	 * if we get here we hit a reserved one, so panic
 	 */
 	default:
-		oops_in_progress = 1;
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
 		verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
@@ -557,6 +563,16 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 	BUG_ON(sig == 0);
 
+	/* If the fault was caused by a kernel thread, or interrupt handler
+	 * we will kernel panic, so the system reboots.
+	 */
+	if (kernel_mode_regs(fp) || (current && !current->mm)) {
+		console_verbose();
+		oops_in_progress = 1;
+		if (strerror)
+			verbose_printk(strerror);
+	}
+
 	if (sig != SIGTRAP) {
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
@@ -606,8 +622,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
 		fp->pc = SAFE_USER_INSTRUCTION;
 
+ traps_done:
 	trace_buffer_restore(j);
-	return;
 }
 
 /* Typical exception handling routines	*/
@@ -792,6 +808,18 @@ void dump_bfin_trace_buffer(void)
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
+#ifdef CONFIG_BUG
+int is_valid_bugaddr(unsigned long addr)
+{
+	unsigned short opcode;
+
+	if (!get_instruction(&opcode, (unsigned short *)addr))
+		return 0;
+
+	return opcode == BFIN_BUG_OPCODE;
+}
+#endif
+
 /*
  * Checks to see if the address pointed to is either a
  * 16-bit CALL instruction, or a 32-bit CALL instruction

arch/blackfin/kernel/vmlinux.lds.S

@@ -54,6 +54,7 @@ SECTIONS
 		SCHED_TEXT
 #endif
 		LOCK_TEXT
+		IRQENTRY_TEXT
 		KPROBES_TEXT
 		*(.text.*)
 		*(.fixup)
@@ -166,6 +167,20 @@ SECTIONS
 	}
 	PERCPU(4)
 	SECURITY_INIT
+
+	/* we have to discard exit text and such at runtime, not link time, to
+	 * handle embedded cross-section references (alt instructions, bug
+	 * table, eh_frame, etc...)
+	 */
+	.exit.text :
+	{
+		EXIT_TEXT
+	}
+	.exit.data :
+	{
+		EXIT_DATA
+	}
+
 	.init.ramfs :
 	{
 		. = ALIGN(4);
@@ -264,8 +279,6 @@ SECTIONS
 
 	/DISCARD/ :
 	{
-		EXIT_TEXT
-		EXIT_DATA
 		*(.exitcall.exit)
 	}
 }

arch/blackfin/lib/checksum.c

@@ -116,6 +116,7 @@ __sum16 ip_compute_csum(const void *buff, int len)
 {
 	return (__force __sum16)~do_csum(buff, len);
 }
+EXPORT_SYMBOL(ip_compute_csum);
 
 /*
  * copy from fs while checksumming, otherwise like csum_partial
@@ -130,6 +131,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst,
 	memcpy(dst, (__force void *)src, len);
 	return csum_partial(dst, len, sum);
 }
+EXPORT_SYMBOL(csum_partial_copy_from_user);
 
 /*
  * copy from ds while checksumming, otherwise like csum_partial

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -246,7 +246,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "m25p80", /* Name of spi_driver for this device */
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.chip_select = 2, /* On BF518F-EZBRD it's SPI0_SSEL2 */
 		.platform_data = &bfin_spi_flash_data,
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
@@ -369,6 +369,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -399,6 +404,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -664,6 +664,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -467,6 +467,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -723,6 +723,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf533/boards/H8606.c

@@ -266,6 +266,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf533/boards/blackstamp.c

@@ -162,6 +162,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf533/boards/cm_bf533.c

@@ -160,6 +160,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -196,6 +196,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf533/boards/stamp.c

@@ -299,6 +299,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf537/boards/cm_bf537.c

@@ -182,8 +182,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */

arch/blackfin/mach-bf537/boards/minotaur.c

@@ -184,6 +184,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -398,8 +398,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */

arch/blackfin/mach-bf537/boards/stamp.c

@@ -1345,7 +1345,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 	{
 		I2C_BOARD_INFO("pmic-adp5520", 0x32),
-		.irq = IRQ_PF7,
+		.irq = IRQ_PG0,
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif

arch/blackfin/mach-bf537/boards/tcm_bf537.c

@@ -182,6 +182,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf538/boards/ezkit.c

@@ -352,6 +352,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -366,6 +371,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf548/boards/cm_bf548.c

@@ -612,6 +612,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -626,6 +631,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -396,6 +396,8 @@ static struct platform_device bfin_sir3_device = {
 #endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
 static struct resource smsc911x_resources[] = {
 	{
 		.name = "smsc911x-memory",
@@ -409,11 +411,22 @@ static struct resource smsc911x_resources[] = {
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_32BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
 static struct platform_device smsc911x_device = {
 	.name = "smsc911x",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smsc911x_resources),
 	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 #endif
 
@@ -741,6 +754,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -755,6 +773,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf561/boards/cm_bf561.c

@@ -177,8 +177,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -304,6 +304,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-common/cache-c.c

@@ -16,9 +16,21 @@
 void blackfin_invalidate_entire_dcache(void)
 {
 	u32 dmem = bfin_read_DMEM_CONTROL();
-	SSYNC();
 	bfin_write_DMEM_CONTROL(dmem & ~0xc);
 	SSYNC();
 	bfin_write_DMEM_CONTROL(dmem);
 	SSYNC();
 }
+
+/* Invalidate the Entire Instruction cache by
+ * clearing IMC bit
+ */
+void blackfin_invalidate_entire_icache(void)
+{
+	u32 imem = bfin_read_IMEM_CONTROL();
+	bfin_write_IMEM_CONTROL(imem & ~0x4);
+	SSYNC();
+	bfin_write_IMEM_CONTROL(imem);
+	SSYNC();
+}
+

arch/blackfin/mach-common/entry.S

@@ -42,6 +42,7 @@
 #include <asm/thread_info.h>  /* TIF_NEED_RESCHED */
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
+#include <asm/traps.h>
 
 #include <asm/context.S>
 
@@ -84,13 +85,15 @@ ENTRY(_ex_workaround_261)
 	if !cc jump _bfin_return_from_exception;
 	/* fall through */
 	R7 = P4;
-	R6 = 0x26;	/* Data CPLB Miss */
+	R6 = VEC_CPLB_M;	/* Data CPLB Miss */
 	cc = R6 == R7;
 	if cc jump _ex_dcplb_miss (BP);
-	R6 = 0x23;	/* Data CPLB Miss */
+#ifdef CONFIG_MPU
+	R6 = VEC_CPLB_VL;	/* Data CPLB Violation */
 	cc = R6 == R7;
 	if cc jump _ex_dcplb_viol (BP);
-	/* Handle 0x23 Data CPLB Protection Violation
+#endif
+	/* Handle Data CPLB Protection Violation
 	 * and Data CPLB Multiple Hits - Linux Trap Zero
 	 */
 	jump _ex_trap_c;
@@ -270,7 +273,7 @@ ENTRY(_bfin_return_from_exception)
 	r6.l = lo(SEQSTAT_EXCAUSE);
 	r6.h = hi(SEQSTAT_EXCAUSE);
 	r7 = r7 & r6;
-	r6 = 0x25;
+	r6 = VEC_UNCOV;
 	CC = R7 == R6;
 	if CC JUMP _double_fault;
 #endif
@@ -1605,6 +1608,7 @@ ENTRY(_sys_call_table)
 	.long _sys_inotify_init1	/* 365 */
 	.long _sys_preadv
 	.long _sys_pwritev
+	.long _sys_rt_tgsigqueueinfo
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall

arch/blackfin/mach-common/smp.c

@@ -144,7 +144,7 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
 
 static irqreturn_t ipi_handler(int irq, void *dev_instance)
 {
-	struct ipi_message *msg, *mg;
+	struct ipi_message *msg;
 	struct ipi_message_queue *msg_queue;
 	unsigned int cpu = smp_processor_id();
 
@@ -154,7 +154,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 	msg_queue->count++;
 
 	spin_lock(&msg_queue->lock);
-	list_for_each_entry_safe(msg, mg, &msg_queue->head, list) {
+	while (!list_empty(&msg_queue->head)) {
+		msg = list_entry(msg_queue->head.next, typeof(*msg), list);
 		list_del(&msg->list);
 		switch (msg->type) {
 		case BFIN_IPI_RESCHEDULE:
@@ -221,7 +222,7 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -261,7 +262,7 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -292,7 +293,7 @@ void smp_send_reschedule(int cpu)
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -320,7 +321,7 @@ void smp_send_stop(void)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -468,6 +469,17 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
 
+#ifdef __ARCH_SYNC_CORE_ICACHE
+void resync_core_icache(void)
+{
+	unsigned int cpu = get_cpu();
+	blackfin_invalidate_entire_icache();
+	++per_cpu(cpu_data, cpu).icache_invld_count;
+	put_cpu();
+}
+EXPORT_SYMBOL(resync_core_icache);
+#endif
+
 #ifdef __ARCH_SYNC_CORE_DCACHE
 unsigned long barrier_mask __attribute__ ((__section__(".l2.bss")));
 

arch/ia64/mm/extable.c

@@ -8,7 +8,7 @@
 #include <linux/sort.h>
 
 #include <asm/uaccess.h>
-#include <asm/module.h>
+#include <linux/module.h>
 
 static int cmp_ex(const void *a, const void *b)
 {
@@ -55,7 +55,7 @@ void sort_extable (struct exception_table_entry *start,
 
 static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
 {
-	return (unsigned long)&x->insn + x->insn;
+	return (unsigned long)&x->addr + x->addr;
 }
 
 #ifdef CONFIG_MODULES

arch/mips/configs/bigsur_defconfig

@@ -963,7 +963,7 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
-CONFIG_SENSORS_MAX6875=y
+CONFIG_EEPROM_MAX6875=y
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y

arch/mips/configs/mtx1_defconfig

@@ -1849,7 +1849,7 @@ CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set

arch/mips/include/asm/errno.h

@@ -119,6 +119,8 @@
 #define	EOWNERDEAD	165	/* Owner died */
 #define	ENOTRECOVERABLE	166	/* State not recoverable */
 
+#define	ERFKILL		167	/* Operation not possible due to RF-kill */
+
 #define EDQUOT		1133	/* Quota exceeded */
 
 #ifdef __KERNEL__

arch/parisc/include/asm/errno.h

@@ -120,5 +120,6 @@
 #define EOWNERDEAD	254	/* Owner died */
 #define ENOTRECOVERABLE	255	/* State not recoverable */
 
+#define	ERFKILL		256	/* Operation not possible due to RF-kill */
 
 #endif

arch/powerpc/configs/ppc6xx_defconfig

@@ -1808,7 +1808,7 @@ CONFIG_PCF8575=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_TPS65010 is not set
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 CONFIG_SENSORS_TSL2550=m
 CONFIG_MCU_MPC8349EMITX=m
 # CONFIG_I2C_DEBUG_CORE is not set

arch/powerpc/include/asm/qe.h

@@ -675,6 +675,8 @@ struct ucc_slow_pram {
 #define UCC_GETH_UPSMR_RMM      0x00001000
 #define UCC_GETH_UPSMR_CAM      0x00000400
 #define UCC_GETH_UPSMR_BRO      0x00000200
+#define UCC_GETH_UPSMR_SMM	0x00000080
+#define UCC_GETH_UPSMR_SGMM	0x00000020
 
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD	0x8000

arch/powerpc/platforms/82xx/ep8248e.c

@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
 #include <linux/mdio-bitbang.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
@@ -115,7 +116,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 	struct mii_bus *bus;
 	struct resource res;
 	struct device_node *node;
-	int ret, i;
+	int ret;
 
 	node = of_get_parent(ofdev->node);
 	of_node_put(node);
@@ -130,17 +131,13 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 	if (!bus)
 		return -ENOMEM;
 
-	bus->phy_mask = 0;
 	bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		bus->irq[i] = -1;
-
 	bus->name = "ep8248e-mdio-bitbang";
 	bus->parent = &ofdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
-	return mdiobus_register(bus);
+	return of_mdiobus_register(bus, ofdev->node);
 }
 
 static int ep8248e_mdio_remove(struct of_device *ofdev)

arch/powerpc/platforms/pasemi/gpio_mdio.c

@@ -29,7 +29,7 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/phy.h>
-#include <linux/platform_device.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #define DELAY 1
@@ -39,6 +39,7 @@ static void __iomem *gpio_regs;
 struct gpio_priv {
 	int mdc_pin;
 	int mdio_pin;
+	int mdio_irqs[PHY_MAX_ADDR];
 };
 
 #define MDC_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdc_pin)
@@ -218,12 +219,11 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 				     const struct of_device_id *match)
 {
 	struct device *dev = &ofdev->dev;
-	struct device_node *phy_dn, *np = ofdev->node;
+	struct device_node *np = ofdev->node;
 	struct mii_bus *new_bus;
 	struct gpio_priv *priv;
 	const unsigned int *prop;
 	int err;
-	int i;
 
 	err = -ENOMEM;
 	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
@@ -244,27 +244,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
 	new_bus->priv = priv;
 
-	new_bus->phy_mask = 0;
-
-	new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-
-	if (!new_bus->irq)
-		goto out_free_bus;
-
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		new_bus->irq[i] = NO_IRQ;
-
-	for (phy_dn = of_get_next_child(np, NULL);
-	     phy_dn != NULL;
-	     phy_dn = of_get_next_child(np, phy_dn)) {
-		const unsigned int *ip, *regp;
-
-		ip = of_get_property(phy_dn, "interrupts", NULL);
-		regp = of_get_property(phy_dn, "reg", NULL);
-		if (!ip || !regp || *regp >= PHY_MAX_ADDR)
-			continue;
-		new_bus->irq[*regp] = irq_create_mapping(NULL, *ip);
-	}
+	new_bus->irq = priv->mdio_irqs;
 
 	prop = of_get_property(np, "mdc-pin", NULL);
 	priv->mdc_pin = *prop;
@@ -275,7 +255,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	new_bus->parent = dev;
 	dev_set_drvdata(dev, new_bus);
 
-	err = mdiobus_register(new_bus);
+	err = of_mdiobus_register(new_bus, np);
 
 	if (err != 0) {
 		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
@@ -286,8 +266,6 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	return 0;
 
 out_free_irq:
-	kfree(new_bus->irq);
-out_free_bus:
 	kfree(new_bus);
 out_free_priv:
 	kfree(priv);

arch/s390/Kconfig

@@ -348,6 +348,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 config ARCH_ENABLE_MEMORY_HOTREMOVE
 	def_bool y
 
+config ARCH_HIBERNATION_POSSIBLE
+       def_bool y if 64BIT
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
@@ -592,6 +595,12 @@ config SECCOMP
 
 endmenu
 
+menu "Power Management"
+
+source "kernel/power/Kconfig"
+
+endmenu
+
 source "net/Kconfig"
 
 config PCMCIA

arch/s390/Makefile

@@ -88,7 +88,9 @@ LDFLAGS_vmlinux := -e start
 head-y		:= arch/s390/kernel/head.o arch/s390/kernel/init_task.o
 
 core-y		+= arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
-		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/
+		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/ \
+		   arch/s390/power/
+
 libs-y		+= arch/s390/lib/
 drivers-y	+= drivers/s390/
 drivers-$(CONFIG_MATHEMU) += arch/s390/math-emu/

arch/s390/appldata/appldata_base.c

@@ -5,7 +5,7 @@
  * Exports appldata_register_ops() and appldata_unregister_ops() for the
  * data gathering modules.
  *
- * Copyright IBM Corp. 2003, 2008
+ * Copyright IBM Corp. 2003, 2009
  *
  * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
@@ -26,6 +26,8 @@
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/workqueue.h>
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
 #include <asm/appldata.h>
 #include <asm/timer.h>
 #include <asm/uaccess.h>
@@ -41,6 +43,9 @@
 
 #define TOD_MICRO	0x01000			/* nr. of TOD clock units
 						   for 1 microsecond */
+
+static struct platform_device *appldata_pdev;
+
 /*
  * /proc entries (sysctl)
  */
@@ -86,6 +91,7 @@ static atomic_t appldata_expire_count = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(appldata_timer_lock);
 static int appldata_interval = APPLDATA_CPU_INTERVAL;
 static int appldata_timer_active;
+static int appldata_timer_suspended = 0;
 
 /*
  * Work queue
@@ -475,6 +481,93 @@ void appldata_unregister_ops(struct appldata_ops *ops)
 /********************** module-ops management <END> **************************/
 
 
+/**************************** suspend / resume *******************************/
+static int appldata_freeze(struct device *dev)
+{
+	struct appldata_ops *ops;
+	int rc;
+	struct list_head *lh;
+
+	get_online_cpus();
+	spin_lock(&appldata_timer_lock);
+	if (appldata_timer_active) {
+		__appldata_vtimer_setup(APPLDATA_DEL_TIMER);
+		appldata_timer_suspended = 1;
+	}
+	spin_unlock(&appldata_timer_lock);
+	put_online_cpus();
+
+	mutex_lock(&appldata_ops_mutex);
+	list_for_each(lh, &appldata_ops_list) {
+		ops = list_entry(lh, struct appldata_ops, list);
+		if (ops->active == 1) {
+			rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
+					(unsigned long) ops->data, ops->size,
+					ops->mod_lvl);
+			if (rc != 0)
+				pr_err("Stopping the data collection for %s "
+				       "failed with rc=%d\n", ops->name, rc);
+		}
+	}
+	mutex_unlock(&appldata_ops_mutex);
+	return 0;
+}
+
+static int appldata_restore(struct device *dev)
+{
+	struct appldata_ops *ops;
+	int rc;
+	struct list_head *lh;
+
+	get_online_cpus();
+	spin_lock(&appldata_timer_lock);
+	if (appldata_timer_suspended) {
+		__appldata_vtimer_setup(APPLDATA_ADD_TIMER);
+		appldata_timer_suspended = 0;
+	}
+	spin_unlock(&appldata_timer_lock);
+	put_online_cpus();
+
+	mutex_lock(&appldata_ops_mutex);
+	list_for_each(lh, &appldata_ops_list) {
+		ops = list_entry(lh, struct appldata_ops, list);
+		if (ops->active == 1) {
+			ops->callback(ops->data);	// init record
+			rc = appldata_diag(ops->record_nr,
+					APPLDATA_START_INTERVAL_REC,
+					(unsigned long) ops->data, ops->size,
+					ops->mod_lvl);
+			if (rc != 0) {
+				pr_err("Starting the data collection for %s "
+				       "failed with rc=%d\n", ops->name, rc);
+			}
+		}
+	}
+	mutex_unlock(&appldata_ops_mutex);
+	return 0;
+}
+
+static int appldata_thaw(struct device *dev)
+{
+	return appldata_restore(dev);
+}
+
+static struct dev_pm_ops appldata_pm_ops = {
+	.freeze		= appldata_freeze,
+	.thaw		= appldata_thaw,
+	.restore	= appldata_restore,
+};
+
+static struct platform_driver appldata_pdrv = {
+	.driver = {
+		.name	= "appldata",
+		.owner	= THIS_MODULE,
+		.pm	= &appldata_pm_ops,
+	},
+};
+/************************* suspend / resume <END> ****************************/
+
+
 /******************************* init / exit *********************************/
 
 static void __cpuinit appldata_online_cpu(int cpu)
@@ -531,11 +624,23 @@ static struct notifier_block __cpuinitdata appldata_nb = {
  */
 static int __init appldata_init(void)
 {
-	int i;
+	int i, rc;
+
+	rc = platform_driver_register(&appldata_pdrv);
+	if (rc)
+		return rc;
 
+	appldata_pdev = platform_device_register_simple("appldata", -1, NULL,
+							0);
+	if (IS_ERR(appldata_pdev)) {
+		rc = PTR_ERR(appldata_pdev);
+		goto out_driver;
+	}
 	appldata_wq = create_singlethread_workqueue("appldata");
-	if (!appldata_wq)
-		return -ENOMEM;
+	if (!appldata_wq) {
+		rc = -ENOMEM;
+		goto out_device;
+	}
 
 	get_online_cpus();
 	for_each_online_cpu(i)
@@ -547,6 +652,12 @@ static int __init appldata_init(void)
 
 	appldata_sysctl_header = register_sysctl_table(appldata_dir_table);
 	return 0;
+
+out_device:
+	platform_device_unregister(appldata_pdev);
+out_driver:
+	platform_driver_unregister(&appldata_pdrv);
+	return rc;
 }
 
 __initcall(appldata_init);

arch/s390/include/asm/ccwdev.h

@@ -1,11 +1,9 @@
 /*
- *  include/asm-s390/ccwdev.h
- *  include/asm-s390x/ccwdev.h
+ * Copyright  IBM Corp. 2002, 2009
  *
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Arnd Bergmann <arndb@de.ibm.com>
+ * Author(s): Arnd Bergmann <arndb@de.ibm.com>
  *
- *  Interface for CCW device drivers
+ * Interface for CCW device drivers
  */
 #ifndef _S390_CCWDEV_H_
 #define _S390_CCWDEV_H_
@@ -104,6 +102,11 @@ struct ccw_device {
  * @set_offline: called when setting device offline
  * @notify: notify driver of device state changes
  * @shutdown: called at device shutdown
+ * @prepare: prepare for pm state transition
+ * @complete: undo work done in @prepare
+ * @freeze: callback for freezing during hibernation snapshotting
+ * @thaw: undo work done in @freeze
+ * @restore: callback for restoring after hibernation
  * @driver: embedded device driver structure
  * @name: device driver name
  */
@@ -116,6 +119,11 @@ struct ccw_driver {
 	int (*set_offline) (struct ccw_device *);
 	int (*notify) (struct ccw_device *, int);
 	void (*shutdown) (struct ccw_device *);
+	int (*prepare) (struct ccw_device *);
+	void (*complete) (struct ccw_device *);
+	int (*freeze)(struct ccw_device *);
+	int (*thaw) (struct ccw_device *);
+	int (*restore)(struct ccw_device *);
 	struct device_driver driver;
 	char *name;
 };
@@ -184,6 +192,7 @@ extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
 #define to_ccwdrv(n) container_of(n, struct ccw_driver, driver)
 
 extern struct ccw_device *ccw_device_probe_console(void);
+extern int ccw_device_force_console(void);
 
 // FIXME: these have to go
 extern int _ccw_device_get_subchannel_number(struct ccw_device *);

arch/s390/include/asm/ccwgroup.h

@@ -38,6 +38,11 @@ struct ccwgroup_device {
  * @set_online: function called when device is set online
  * @set_offline: function called when device is set offline
  * @shutdown: function called when device is shut down
+ * @prepare: prepare for pm state transition
+ * @complete: undo work done in @prepare
+ * @freeze: callback for freezing during hibernation snapshotting
+ * @thaw: undo work done in @freeze
+ * @restore: callback for restoring after hibernation
  * @driver: embedded driver structure
  */
 struct ccwgroup_driver {
@@ -51,6 +56,11 @@ struct ccwgroup_driver {
 	int (*set_online) (struct ccwgroup_device *);
 	int (*set_offline) (struct ccwgroup_device *);
 	void (*shutdown)(struct ccwgroup_device *);
+	int (*prepare) (struct ccwgroup_device *);
+	void (*complete) (struct ccwgroup_device *);
+	int (*freeze)(struct ccwgroup_device *);
+	int (*thaw) (struct ccwgroup_device *);
+	int (*restore)(struct ccwgroup_device *);
 
 	struct device_driver driver;
 };

arch/s390/include/asm/suspend.h

@@ -0,0 +1,10 @@
+#ifndef __ASM_S390_SUSPEND_H
+#define __ASM_S390_SUSPEND_H
+
+static inline int arch_prepare_suspend(void)
+{
+	return 0;
+}
+
+#endif
+

arch/s390/include/asm/system.h

@@ -1,11 +1,7 @@
 /*
- *  include/asm-s390/system.h
+ * Copyright IBM Corp. 1999, 2009
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *
- *  Derived from "include/asm-i386/system.h"
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #ifndef __ASM_SYSTEM_H
@@ -469,6 +465,20 @@ extern psw_t sysc_restore_trace_psw;
 extern psw_t io_restore_trace_psw;
 #endif
 
+static inline int tprot(unsigned long addr)
+{
+	int rc = -EFAULT;
+
+	asm volatile(
+		"	tprot	0(%1),0\n"
+		"0:	ipm	%0\n"
+		"	srl	%0,28\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "a" (addr) : "cc");
+	return rc;
+}
+
 #endif /* __KERNEL__ */
 
 #endif