Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
  [POWERPC] re-enable OProfile for iSeries, using timer interrupt
  [POWERPC] support ibm,extended-*-frequency properties
  [POWERPC] Extra sanity check in EEH code
  [POWERPC] Dont look for class-code in pci children
  [POWERPC] Fix mdelay badness on shared processor partitions
  [POWERPC] disable floating point exceptions for init
  [POWERPC] Unify ppc syscall tables
  [POWERPC] mpic: add support for serial mode interrupts
  [POWERPC] pseries: Print PCI slot location code on failure
  [POWERPC] spufs: one more fix for 64k pages
  [POWERPC] spufs: fail spu_create with invalid flags
  [POWERPC] spufs: clear class2 interrupt status before wakeup
  [POWERPC] spufs: fix Makefile for "make clean"
  [POWERPC] spufs: remove stop_code from struct spu
  [POWERPC] spufs: fix spu irq affinity setting
  [POWERPC] spufs: further abstract priv1 register access
  [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
  [POWERPC] spufs: dont try to access SPE channel 1 count
  [POWERPC] spufs: use kzalloc in create_spu
  [POWERPC] spufs: fix initial state of wbox file
  ...

Manually resolved conflicts in:
	drivers/net/phy/Makefile
	include/asm-powerpc/spu.h

arch/powerpc/Kconfig

@@ -45,6 +45,10 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config GENERIC_FIND_NEXT_BIT
+	bool
+	default y
+
 config PPC
 	bool
 	default y
@@ -137,6 +141,15 @@ config PPC_85xx
 	select FSL_SOC
 	select 85xx
 
+config PPC_86xx
+	bool "Freescale 86xx"
+	select 6xx
+	select FSL_SOC
+	select PPC_FPU
+	select ALTIVEC
+	help
+	  The Freescale E600 SoCs have 74xx cores.
+
 config 40x
 	bool "AMCC 40x"
 
@@ -336,7 +349,7 @@ endchoice
 
 config PPC_PSERIES
 	depends on PPC_MULTIPLATFORM && PPC64
-	bool "  IBM pSeries & new (POWER5-based) iSeries"
+	bool "IBM pSeries & new (POWER5-based) iSeries"
 	select PPC_I8259
 	select PPC_RTAS
 	select RTAS_ERROR_LOGGING
@@ -344,7 +357,7 @@ config PPC_PSERIES
 	default y
 
 config PPC_CHRP
-	bool "  Common Hardware Reference Platform (CHRP) based machines"
+	bool "Common Hardware Reference Platform (CHRP) based machines"
 	depends on PPC_MULTIPLATFORM && PPC32
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
@@ -354,7 +367,7 @@ config PPC_CHRP
 	default y
 
 config PPC_PMAC
-	bool "  Apple PowerMac based machines"
+	bool "Apple PowerMac based machines"
 	depends on PPC_MULTIPLATFORM
 	select PPC_INDIRECT_PCI if PPC32
 	select PPC_MPC106 if PPC32
@@ -370,7 +383,7 @@ config PPC_PMAC64
 	default y
 
 config PPC_PREP
-	bool "  PowerPC Reference Platform (PReP) based machines"
+	bool "PowerPC Reference Platform (PReP) based machines"
 	depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
@@ -379,7 +392,7 @@ config PPC_PREP
 
 config PPC_MAPLE
 	depends on PPC_MULTIPLATFORM && PPC64
-	bool "  Maple 970FX Evaluation Board"
+	bool "Maple 970FX Evaluation Board"
 	select U3_DART
 	select MPIC_BROKEN_U3
 	select GENERIC_TBSYNC
@@ -391,8 +404,18 @@ config PPC_MAPLE
 	  For more informations, refer to <http://www.970eval.com>
 
 config PPC_CELL
-	bool "  Cell Broadband Processor Architecture"
+	bool
+	default n
+
+config PPC_CELL_NATIVE
+	bool
+	select PPC_CELL
+	default n
+
+config PPC_IBM_CELL_BLADE
+	bool "  IBM Cell Blade"
 	depends on PPC_MULTIPLATFORM && PPC64
+	select PPC_CELL_NATIVE
 	select PPC_RTAS
 	select MMIO_NVRAM
 	select PPC_UDBG_16550
@@ -439,11 +462,6 @@ config MPIC_BROKEN_U3
 	depends on PPC_MAPLE
 	default y
 
-config CELL_IIC
-	depends on PPC_CELL
-	bool
-	default y
-
 config IBMVIO
 	depends on PPC_PSERIES || PPC_ISERIES
 	bool
@@ -545,6 +563,7 @@ source arch/powerpc/platforms/embedded6xx/Kconfig
 source arch/powerpc/platforms/4xx/Kconfig
 source arch/powerpc/platforms/83xx/Kconfig
 source arch/powerpc/platforms/85xx/Kconfig
+source arch/powerpc/platforms/86xx/Kconfig
 source arch/powerpc/platforms/8xx/Kconfig
 source arch/powerpc/platforms/cell/Kconfig
 
@@ -776,6 +795,7 @@ config GENERIC_ISA_DMA
 
 config PPC_I8259
 	bool
+	default y if MPC8641_HPCN
 	default n
 
 config PPC_INDIRECT_PCI
@@ -798,8 +818,8 @@ config MCA
 	bool
 
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
-	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx
+	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
+	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help
@@ -827,12 +847,12 @@ config PCI_8260
 	default y
 
 config 8260_PCI9
-	bool "  Enable workaround for MPC826x erratum PCI 9"
+	bool "Enable workaround for MPC826x erratum PCI 9"
 	depends on PCI_8260 && !ADS8272
 	default y
 
 choice
-	prompt "  IDMA channel for PCI 9 workaround"
+	prompt "IDMA channel for PCI 9 workaround"
 	depends on 8260_PCI9
 
 config 8260_PCI9_IDMA1
@@ -849,6 +869,8 @@ config 8260_PCI9_IDMA4
 
 endchoice
 
+source "drivers/pci/pcie/Kconfig"
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"

arch/powerpc/Kconfig.debug

@@ -110,13 +110,16 @@ config SERIAL_TEXT_DEBUG
 	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
 		PPC_GEN550 || PPC_MPC52xx
 
+config PPC_EARLY_DEBUG
+	bool "Early debugging (dangerous)"
+
 choice
-	prompt "Early debugging (dangerous)"
-	bool
-	optional
+	prompt "Early debugging console"
+	depends on PPC_EARLY_DEBUG
 	help
-	  Enable early debugging. Careful, if you enable debugging for the
-	  wrong type of machine your kernel _will not boot_.
+	  Use the selected console for early debugging. Careful, if you
+	  enable debugging for the wrong type of machine your kernel
+	  _will not boot_.
 
 config PPC_EARLY_DEBUG_LPAR
 	bool "LPAR HV Console"

arch/powerpc/Makefile

@@ -108,7 +108,6 @@ ifeq ($(CONFIG_6xx),y)
 CFLAGS		+= -mcpu=powerpc
 endif
 
-cpu-as-$(CONFIG_PPC64BRIDGE)	+= -Wa,-mppc64bridge
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
 cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec

arch/powerpc/boot/main.c

@@ -33,6 +33,14 @@ extern char _vmlinux_end[];
 extern char _initrd_start[];
 extern char _initrd_end[];
 
+/* A buffer that may be edited by tools operating on a zImage binary so as to
+ * edit the command line passed to vmlinux (by setting /chosen/bootargs).
+ * The buffer is put in it's own section so that tools may locate it easier.
+ */
+static char builtin_cmdline[512]
+	__attribute__((section("__builtin_cmdline")));
+
+
 struct addr_range {
 	unsigned long addr;
 	unsigned long size;
@@ -204,6 +212,23 @@ static int is_elf32(void *hdr)
 	return 1;
 }
 
+void export_cmdline(void* chosen_handle)
+{
+        int len;
+        char cmdline[2] = { 0, 0 };
+
+	if (builtin_cmdline[0] == 0)
+		return;
+
+        len = getprop(chosen_handle, "bootargs", cmdline, sizeof(cmdline));
+        if (len > 0 && cmdline[0] != 0)
+		return;
+
+	setprop(chosen_handle, "bootargs", builtin_cmdline,
+		strlen(builtin_cmdline) + 1);
+}
+
+
 void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 {
 	int len;
@@ -289,6 +314,8 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 		memmove((void *)vmlinux.addr,(void *)vmlinuz.addr,vmlinuz.size);
 	}
 
+	export_cmdline(chosen_handle);
+
 	/* Skip over the ELF header */
 #ifdef DEBUG
 	printf("... skipping 0x%lx bytes of ELF header\n\r",

arch/powerpc/boot/prom.h

@@ -31,4 +31,11 @@ static inline int getprop(void *phandle, const char *name,
 	return call_prom("getprop", 4, 1, phandle, name, buf, buflen);
 }
 
+
+static inline int setprop(void *phandle, const char *name,
+			  void *buf, int buflen)
+{
+	return call_prom("setprop", 4, 1, phandle, name, buf, buflen);
+}
+
 #endif				/* _PPC_BOOT_PROM_H_ */

arch/powerpc/configs/cell_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Thu Mar 23 20:48:09 2006
+# Linux kernel version: 2.6.17
+# Mon Jun 19 17:23:03 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -11,6 +11,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -55,7 +56,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
+CONFIG_CPUSETS=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -116,13 +117,15 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 CONFIG_PPC_CELL=y
+CONFIG_PPC_CELL_NATIVE=y
+CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_PPC_SYSTEMSIM=y
 # CONFIG_U3_DART is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=y
 CONFIG_MMIO_NVRAM=y
-CONFIG_CELL_IIC=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
@@ -132,7 +135,9 @@ CONFIG_CELL_IIC=y
 # Cell Broadband Engine options
 #
 CONFIG_SPU_FS=m
+CONFIG_SPU_BASE=y
 CONFIG_SPUFS_MMAP=y
+CONFIG_CBE_RAS=y
 
 #
 # Kernel options
@@ -152,20 +157,24 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=4
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
-# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_MEMORY_HOTPLUG=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_ARCH_MEMORY_PROBE=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
@@ -182,6 +191,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+CONFIG_PCIEPORTBUS=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -476,7 +486,7 @@ CONFIG_DM_MULTIPATH=m
 #
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+CONFIG_BONDING=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 
@@ -624,6 +634,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
+# CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
 
 #
@@ -766,6 +777,7 @@ CONFIG_I2C_ALGOBIT=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -1054,11 +1066,7 @@ CONFIG_DEBUGGER=y
 # CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/mpc85xx_cds_defconfig

@@ -0,0 +1,846 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16
+# Sun Apr  2 11:23:42 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_85xx=y
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_MPIC=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC8540_ADS is not set
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC8540=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#

arch/powerpc/configs/mpc8641_hpcn_defconfig

@@ -0,0 +1,921 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc3
+# Fri Jun 16 10:47:09 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+# CONFIG_SLAB is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_SLOB=y
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_MPIC=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Platform Support
+#
+CONFIG_MPC8641_HPCN=y
+CONFIG_MPC8641=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#

arch/powerpc/configs/pmac32_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:21:32 2006
+# Linux kernel version: 2.6.17-rc5
+# Mon May 29 14:47:49 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -27,11 +28,11 @@ CONFIG_CLASSIC32=y
 # CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
 # CONFIG_E200 is not set
-# CONFIG_E500 is not set
 CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
@@ -59,6 +60,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_EMBEDDED is not set
@@ -73,10 +75,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -88,7 +86,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -97,6 +94,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
 
 #
 # IO Schedulers
@@ -124,6 +123,7 @@ CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -182,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -239,7 +238,9 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -250,9 +251,10 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -264,6 +266,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -278,12 +282,15 @@ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -305,15 +312,15 @@ CONFIG_IP_NF_NETBIOS_NS=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -335,6 +342,7 @@ CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -350,10 +358,12 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
 CONFIG_IP_DCCP_CCID3=m
 CONFIG_IP_DCCP_TFRC_LIB=m
 
@@ -361,7 +371,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # DCCP Kernel Hacking
 #
 # CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_IP_DCCP_UNLOAD_HACK is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -477,6 +486,8 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -662,9 +673,8 @@ CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -694,16 +704,17 @@ CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
 # CONFIG_DM_MULTIPATH is not set
 
 #
@@ -740,7 +751,7 @@ CONFIG_IEEE1394_OHCI1394=m
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
 # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
+# CONFIG_IEEE1394_ETH1394 is not set
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=m
 
@@ -769,10 +780,10 @@ CONFIG_THERM_ADT746X=m
 # Network device support
 #
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
+CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
+CONFIG_TUN=m
 
 #
 # ARCnet devices
@@ -857,6 +868,7 @@ CONFIG_PCNET32=y
 # Wireless LAN (non-hamradio)
 #
 CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
 
 #
 # Obsolete Wireless cards support (pre-802.11)
@@ -992,6 +1004,7 @@ CONFIG_HW_CONSOLE=y
 # Serial drivers
 #
 CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_PCI=m
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -1027,6 +1040,7 @@ CONFIG_GEN_RTC=y
 # Ftape, the floppy tape device driver
 #
 CONFIG_AGP=m
+# CONFIG_AGP_VIA is not set
 CONFIG_AGP_UNINORTH=m
 CONFIG_DRM=m
 # CONFIG_DRM_TDFX is not set
@@ -1081,7 +1095,6 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -1100,10 +1113,8 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_M41T00 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -1130,19 +1141,17 @@ CONFIG_I2C_POWERMAC=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -1152,6 +1161,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
+CONFIG_FB_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -1175,7 +1185,6 @@ CONFIG_FB_MATROX_MYSTIQUE=y
 # CONFIG_FB_MATROX_G is not set
 # CONFIG_FB_MATROX_I2C is not set
 # CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
 CONFIG_FB_RADEON=y
 CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_RADEON_DEBUG is not set
@@ -1234,9 +1243,11 @@ CONFIG_SND_SEQ_DUMMY=m
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -1253,6 +1264,7 @@ CONFIG_SND_DUMMY=m
 # PCI devices
 #
 # CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
@@ -1285,6 +1297,7 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -1310,6 +1323,8 @@ CONFIG_SND_USB_AUDIO=m
 #
 # PCMCIA devices
 #
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
 
 #
 # Open Sound System
@@ -1321,6 +1336,7 @@ CONFIG_SND_USB_AUDIO=m
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1336,7 +1352,9 @@ CONFIG_USB_DYNAMIC_MINORS=y
 #
 # USB Host Controller Drivers
 #
-# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1347,7 +1365,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
@@ -1358,7 +1375,17 @@ CONFIG_USB_PRINTER=m
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_STORAGE is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1374,9 +1401,7 @@ CONFIG_USB_HIDINPUT_POWERBOOK=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1390,15 +1415,6 @@ CONFIG_USB_APPLETOUCH=y
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
 #
 # USB Network Adapters
 #
@@ -1429,6 +1445,7 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
@@ -1436,6 +1453,7 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 # CONFIG_USB_SERIAL_IR is not set
@@ -1460,6 +1478,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
@@ -1484,6 +1503,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
@@ -1501,6 +1521,19 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -1510,6 +1543,11 @@ CONFIG_USB_EZUSB=y
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
 #
 # File systems
 #
@@ -1518,14 +1556,14 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1534,7 +1572,7 @@ CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
 #
@@ -1566,7 +1604,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1590,17 +1627,24 @@ CONFIG_HFSPLUS_FS=m
 # Network File Systems
 #
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
@@ -1681,7 +1725,7 @@ CONFIG_NLS_UTF8=m
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_TEXTSEARCH=y
@@ -1735,29 +1779,29 @@ CONFIG_BOOTX_TEXT=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
 #

arch/powerpc/configs/pseries_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 11:48:00 2006
+# Linux kernel version: 2.6.17-rc4
+# Sun May 28 07:26:56 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -11,6 +11,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -126,8 +127,9 @@ CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
-# CONFIG_IBMEBUS is not set
+CONFIG_IBMEBUS=y
 # CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -143,7 +145,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 # CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
@@ -155,6 +157,7 @@ CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=4
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -467,7 +470,7 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
@@ -499,13 +502,18 @@ CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+CONFIG_SCSI_QLA24XX=m
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -521,7 +529,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
@@ -764,7 +772,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -773,7 +781,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TIPAR is not set
 CONFIG_HVC_DRIVER=y
 CONFIG_HVC_CONSOLE=y
-# CONFIG_HVC_RTAS is not set
+CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
 
 #
@@ -1031,9 +1039,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1104,17 +1110,26 @@ CONFIG_USB_MON=y
 #
 # CONFIG_NEW_LEDS is not set
 
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
-# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
 
 #
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1159,15 +1174,15 @@ CONFIG_XFS_EXPORT=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
+CONFIG_OCFS2_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1199,7 +1214,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1317,7 +1332,7 @@ CONFIG_ZLIB_DEFLATE=m
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
 
 #
 # Kernel hacking
@@ -1329,7 +1344,7 @@ CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1339,17 +1354,13 @@ CONFIG_DEBUG_FS=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/kernel/align.c

@@ -35,17 +35,19 @@ struct aligninfo {
 
 #define INVALID	{ 0, 0 }
 
-#define LD	1	/* load */
-#define ST	2	/* store */
-#define	SE	4	/* sign-extend value */
-#define F	8	/* to/from fp regs */
-#define U	0x10	/* update index register */
-#define M	0x20	/* multiple load/store */
-#define SW	0x40	/* byte swap int or ... */
-#define S	0x40	/* ... single-precision fp */
-#define SX	0x40	/* byte count in XER */
+/* Bits in the flags field */
+#define LD	0	/* load */
+#define ST	1	/* store */
+#define	SE	2	/* sign-extend value */
+#define F	4	/* to/from fp regs */
+#define U	8	/* update index register */
+#define M	0x10	/* multiple load/store */
+#define SW	0x20	/* byte swap */
+#define S	0x40	/* single-precision fp or... */
+#define SX	0x40	/* ... byte count in XER */
 #define HARD	0x80	/* string, stwcx. */
 
+/* DSISR bits reported for a DCBZ instruction: */
 #define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled */
 
 #define SWAP(a, b)	(t = (a), (a) = (b), (b) = t)
@@ -256,12 +258,16 @@ static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
 #define REG_BYTE(rp, i)		*((u8 *)(rp) + (i))
 #endif
 
+#define SWIZ_PTR(p)		((unsigned char __user *)((p) ^ swiz))
+
 static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 			    unsigned int reg, unsigned int nb,
-			    unsigned int flags, unsigned int instr)
+			    unsigned int flags, unsigned int instr,
+			    unsigned long swiz)
 {
 	unsigned long *rptr;
-	unsigned int nb0, i;
+	unsigned int nb0, i, bswiz;
+	unsigned long p;
 
 	/*
 	 * We do not try to emulate 8 bytes multiple as they aren't really
@@ -280,9 +286,12 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 			if (nb == 0)
 				return 1;
 		} else {
-			if (__get_user(instr,
-				       (unsigned int __user *)regs->nip))
+			unsigned long pc = regs->nip ^ (swiz & 4);
+
+			if (__get_user(instr, (unsigned int __user *)pc))
 				return -EFAULT;
+			if (swiz == 0 && (flags & SW))
+				instr = cpu_to_le32(instr);
 			nb = (instr >> 11) & 0x1f;
 			if (nb == 0)
 				nb = 32;
@@ -300,7 +309,10 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 		return -EFAULT;	/* bad address */
 
 	rptr = &regs->gpr[reg];
-	if (flags & LD) {
+	p = (unsigned long) addr;
+	bswiz = (flags & SW)? 3: 0;
+
+	if (!(flags & ST)) {
 		/*
 		 * This zeroes the top 4 bytes of the affected registers
 		 * in 64-bit mode, and also zeroes out any remaining
@@ -311,26 +323,28 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 			memset(&regs->gpr[0], 0,
 			       ((nb0 + 3) / 4) * sizeof(unsigned long));
 
-		for (i = 0; i < nb; ++i)
-			if (__get_user(REG_BYTE(rptr, i), addr + i))
+		for (i = 0; i < nb; ++i, ++p)
+			if (__get_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p)))
 				return -EFAULT;
 		if (nb0 > 0) {
 			rptr = &regs->gpr[0];
 			addr += nb;
-			for (i = 0; i < nb0; ++i)
-				if (__get_user(REG_BYTE(rptr, i), addr + i))
+			for (i = 0; i < nb0; ++i, ++p)
+				if (__get_user(REG_BYTE(rptr, i ^ bswiz),
+					       SWIZ_PTR(p)))
 					return -EFAULT;
 		}
 
 	} else {
-		for (i = 0; i < nb; ++i)
-			if (__put_user(REG_BYTE(rptr, i), addr + i))
+		for (i = 0; i < nb; ++i, ++p)
+			if (__put_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p)))
 				return -EFAULT;
 		if (nb0 > 0) {
 			rptr = &regs->gpr[0];
 			addr += nb;
-			for (i = 0; i < nb0; ++i)
-				if (__put_user(REG_BYTE(rptr, i), addr + i))
+			for (i = 0; i < nb0; ++i, ++p)
+				if (__put_user(REG_BYTE(rptr, i ^ bswiz),
+					       SWIZ_PTR(p)))
 					return -EFAULT;
 		}
 	}
@@ -352,7 +366,7 @@ int fix_alignment(struct pt_regs *regs)
 	unsigned int reg, areg;
 	unsigned int dsisr;
 	unsigned char __user *addr;
-	unsigned char __user *p;
+	unsigned long p, swiz;
 	int ret, t;
 	union {
 		u64 ll;
@@ -380,11 +394,15 @@ int fix_alignment(struct pt_regs *regs)
 	 * let's make one up from the instruction
 	 */
 	if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
-		unsigned int real_instr;
-		if (unlikely(__get_user(real_instr,
-					(unsigned int __user *)regs->nip)))
+		unsigned long pc = regs->nip;
+
+		if (cpu_has_feature(CPU_FTR_PPC_LE) && (regs->msr & MSR_LE))
+			pc ^= 4;
+		if (unlikely(__get_user(instr, (unsigned int __user *)pc)))
 			return -EFAULT;
-		dsisr = make_dsisr(real_instr);
+		if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE))
+			instr = cpu_to_le32(instr);
+		dsisr = make_dsisr(instr);
 	}
 
 	/* extract the operation and registers from the dsisr */
@@ -397,6 +415,24 @@ int fix_alignment(struct pt_regs *regs)
 	nb = aligninfo[instr].len;
 	flags = aligninfo[instr].flags;
 
+	/* Byteswap little endian loads and stores */
+	swiz = 0;
+	if (regs->msr & MSR_LE) {
+		flags ^= SW;
+		/*
+		 * So-called "PowerPC little endian" mode works by
+		 * swizzling addresses rather than by actually doing
+		 * any byte-swapping.  To emulate this, we XOR each
+		 * byte address with 7.  We also byte-swap, because
+		 * the processor's address swizzling depends on the
+		 * operand size (it xors the address with 7 for bytes,
+		 * 6 for halfwords, 4 for words, 0 for doublewords) but
+		 * we will xor with 7 and load/store each byte separately.
+		 */
+		if (cpu_has_feature(CPU_FTR_PPC_LE))
+			swiz = 7;
+	}
+
 	/* DAR has the operand effective address */
 	addr = (unsigned char __user *)regs->dar;
 
@@ -412,7 +448,8 @@ int fix_alignment(struct pt_regs *regs)
 	 * function
 	 */
 	if (flags & M)
-		return emulate_multiple(regs, addr, reg, nb, flags, instr);
+		return emulate_multiple(regs, addr, reg, nb,
+					flags, instr, swiz);
 
 	/* Verify the address of the operand */
 	if (unlikely(user_mode(regs) &&
@@ -431,51 +468,71 @@ int fix_alignment(struct pt_regs *regs)
 	/* If we are loading, get the data from user space, else
 	 * get it from register values
 	 */
-	if (flags & LD) {
+	if (!(flags & ST)) {
 		data.ll = 0;
 		ret = 0;
-		p = addr;
+		p = (unsigned long) addr;
 		switch (nb) {
 		case 8:
-			ret |= __get_user(data.v[0], p++);
-			ret |= __get_user(data.v[1], p++);
-			ret |= __get_user(data.v[2], p++);
-			ret |= __get_user(data.v[3], p++);
+			ret |= __get_user(data.v[0], SWIZ_PTR(p++));
+			ret |= __get_user(data.v[1], SWIZ_PTR(p++));
+			ret |= __get_user(data.v[2], SWIZ_PTR(p++));
+			ret |= __get_user(data.v[3], SWIZ_PTR(p++));
 		case 4:
-			ret |= __get_user(data.v[4], p++);
-			ret |= __get_user(data.v[5], p++);
+			ret |= __get_user(data.v[4], SWIZ_PTR(p++));
+			ret |= __get_user(data.v[5], SWIZ_PTR(p++));
 		case 2:
-			ret |= __get_user(data.v[6], p++);
-			ret |= __get_user(data.v[7], p++);
+			ret |= __get_user(data.v[6], SWIZ_PTR(p++));
+			ret |= __get_user(data.v[7], SWIZ_PTR(p++));
 			if (unlikely(ret))
 				return -EFAULT;
 		}
-	} else if (flags & F)
+	} else if (flags & F) {
 		data.dd = current->thread.fpr[reg];
-	else
+		if (flags & S) {
+			/* Single-precision FP store requires conversion... */
+#ifdef CONFIG_PPC_FPU
+			preempt_disable();
+			enable_kernel_fp();
+			cvt_df(&data.dd, (float *)&data.v[4], &current->thread);
+			preempt_enable();
+#else
+			return 0;
+#endif
+		}
+	} else
 		data.ll = regs->gpr[reg];
 
-	/* Perform other misc operations like sign extension, byteswap,
+	if (flags & SW) {
+		switch (nb) {
+		case 8:
+			SWAP(data.v[0], data.v[7]);
+			SWAP(data.v[1], data.v[6]);
+			SWAP(data.v[2], data.v[5]);
+			SWAP(data.v[3], data.v[4]);
+			break;
+		case 4:
+			SWAP(data.v[4], data.v[7]);
+			SWAP(data.v[5], data.v[6]);
+			break;
+		case 2:
+			SWAP(data.v[6], data.v[7]);
+			break;
+		}
+	}
+
+	/* Perform other misc operations like sign extension
 	 * or floating point single precision conversion
 	 */
-	switch (flags & ~U) {
+	switch (flags & ~(U|SW)) {
 	case LD+SE:	/* sign extend */
 		if ( nb == 2 )
 			data.ll = data.x16.low16;
 		else	/* nb must be 4 */
 			data.ll = data.x32.low32;
 		break;
-	case LD+S:	/* byte-swap */
-	case ST+S:
-		if (nb == 2) {
-			SWAP(data.v[6], data.v[7]);
-		} else {
-			SWAP(data.v[4], data.v[7]);
-			SWAP(data.v[5], data.v[6]);
-		}
-		break;
 
-	/* Single-precision FP load and store require conversions... */
+	/* Single-precision FP load requires conversion... */
 	case LD+F+S:
 #ifdef CONFIG_PPC_FPU
 		preempt_disable();
@@ -484,16 +541,6 @@ int fix_alignment(struct pt_regs *regs)
 		preempt_enable();
 #else
 		return 0;
-#endif
-		break;
-	case ST+F+S:
-#ifdef CONFIG_PPC_FPU
-		preempt_disable();
-		enable_kernel_fp();
-		cvt_df(&data.dd, (float *)&data.v[4], &current->thread);
-		preempt_enable();
-#else
-		return 0;
 #endif
 		break;
 	}
@@ -501,19 +548,19 @@ int fix_alignment(struct pt_regs *regs)
 	/* Store result to memory or update registers */
 	if (flags & ST) {
 		ret = 0;
-		p = addr;
+		p = (unsigned long) addr;
 		switch (nb) {
 		case 8:
-			ret |= __put_user(data.v[0], p++);
-			ret |= __put_user(data.v[1], p++);
-			ret |= __put_user(data.v[2], p++);
-			ret |= __put_user(data.v[3], p++);
+			ret |= __put_user(data.v[0], SWIZ_PTR(p++));
+			ret |= __put_user(data.v[1], SWIZ_PTR(p++));
+			ret |= __put_user(data.v[2], SWIZ_PTR(p++));
+			ret |= __put_user(data.v[3], SWIZ_PTR(p++));
 		case 4:
-			ret |= __put_user(data.v[4], p++);
-			ret |= __put_user(data.v[5], p++);
+			ret |= __put_user(data.v[4], SWIZ_PTR(p++));
+			ret |= __put_user(data.v[5], SWIZ_PTR(p++));
 		case 2:
-			ret |= __put_user(data.v[6], p++);
-			ret |= __put_user(data.v[7], p++);
+			ret |= __put_user(data.v[6], SWIZ_PTR(p++));
+			ret |= __put_user(data.v[7], SWIZ_PTR(p++));
 		}
 		if (unlikely(ret))
 			return -EFAULT;

arch/powerpc/kernel/asm-offsets.c

@@ -122,9 +122,8 @@ int main(void)
 	DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
 	DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
-#ifdef CONFIG_PPC_64K_PAGES
-	DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir));
-#endif
+	DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, context.sllp));
+	DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
 #ifdef CONFIG_HUGETLB_PAGE
 	DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas));
 	DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas));

arch/powerpc/kernel/cpu_setup_6xx.S

@@ -210,9 +210,11 @@ setup_745x_specifics:
 	 * the firmware. If any, we disable NAP capability as
 	 * it's known to be bogus on rev 2.1 and earlier
 	 */
+BEGIN_FTR_SECTION
 	mfspr	r11,SPRN_L3CR
 	andis.	r11,r11,L3CR_L3E@h
 	beq	1f
+END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
 	lwz	r6,CPU_SPEC_FEATURES(r5)
 	andi.	r0,r6,CPU_FTR_L3_DISABLE_NAP
 	beq	1f

arch/powerpc/kernel/cpu_setup_power4.S

@@ -73,23 +73,6 @@ _GLOBAL(__970_cpu_preinit)
 	isync
 	blr
 
-_GLOBAL(__setup_cpu_power4)
-	blr
-
-_GLOBAL(__setup_cpu_be)
-        /* Set large page sizes LP=0: 16MB, LP=1: 64KB */
-        addi    r3, 0,  0
-        ori     r3, r3, HID6_LB
-        sldi    r3, r3, 32
-        nor     r3, r3, r3
-        mfspr   r4, SPRN_HID6
-        and     r4, r4, r3
-        addi    r3, 0, 0x02000
-        sldi    r3, r3, 32
-        or      r4, r4, r3
-        mtspr   SPRN_HID6, r4
-	blr
-
 _GLOBAL(__setup_cpu_ppc970)
 	mfspr	r0,SPRN_HID0
 	li	r11,5			/* clear DOZE and SLEEP */

arch/powerpc/kernel/cputable.c

@@ -30,11 +30,7 @@ EXPORT_SYMBOL(cur_cpu_spec);
  * part of the cputable though. That has to be fixed for both ppc32
  * and ppc64
  */
-#ifdef CONFIG_PPC64
-extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec);
-extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec);
-extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec);
-#else
+#ifdef CONFIG_PPC32
 extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -58,7 +54,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 #define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_POWER6	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
-				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
+				 PPC_FEATURE_TRUE_LE)
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
 
@@ -78,11 +75,10 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00400000,
 		.cpu_name		= "POWER3 (630)",
 		.cpu_features		= CPU_FTRS_POWER3,
-		.cpu_user_features	= COMMON_USER_PPC64,
+		.cpu_user_features	= COMMON_USER_PPC64|PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
 		.oprofile_cpu_type	= "ppc64/power3",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "power3",
@@ -92,11 +88,10 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00410000,
 		.cpu_name		= "POWER3 (630+)",
 		.cpu_features		= CPU_FTRS_POWER3,
-		.cpu_user_features	= COMMON_USER_PPC64,
+		.cpu_user_features	= COMMON_USER_PPC64|PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
 		.oprofile_cpu_type	= "ppc64/power3",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "power3",
@@ -110,7 +105,6 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
 		.oprofile_cpu_type	= "ppc64/rs64",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "rs64",
@@ -124,7 +118,6 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
 		.oprofile_cpu_type	= "ppc64/rs64",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "rs64",
@@ -138,7 +131,6 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
 		.oprofile_cpu_type	= "ppc64/rs64",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "rs64",
@@ -152,7 +144,6 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
 		.oprofile_cpu_type	= "ppc64/rs64",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "rs64",
@@ -166,7 +157,6 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power4,
 		.oprofile_cpu_type	= "ppc64/power4",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power4",
@@ -180,7 +170,6 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power4,
 		.oprofile_cpu_type	= "ppc64/power4",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power4",
@@ -200,17 +189,11 @@ struct cpu_spec	cpu_specs[] = {
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
-#endif /* CONFIG_PPC64 */
-#if defined(CONFIG_PPC64) || defined(CONFIG_POWER4)
 	{	/* PPC970FX */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x003c0000,
 		.cpu_name		= "PPC970FX",
-#ifdef CONFIG_PPC32
-		.cpu_features		= CPU_FTRS_970_32,
-#else
 		.cpu_features		= CPU_FTRS_PPC970,
-#endif
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 128,
@@ -221,8 +204,6 @@ struct cpu_spec	cpu_specs[] = {
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
-#endif /* defined(CONFIG_PPC64) || defined(CONFIG_POWER4) */
-#ifdef CONFIG_PPC64
 	{	/* PPC970MP */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00440000,
@@ -232,6 +213,7 @@ struct cpu_spec	cpu_specs[] = {
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
 		.cpu_setup		= __setup_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
@@ -246,9 +228,13 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
-		.cpu_setup		= __setup_cpu_power4,
 		.oprofile_cpu_type	= "ppc64/power5",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
+		/* SIHV / SIPR bits are implemented on POWER4+ (GQ)
+		 * and above but only works on POWER5 and above
+		 */
+		.oprofile_mmcra_sihv	= MMCRA_SIHV,
+		.oprofile_mmcra_sipr	= MMCRA_SIPR,
 		.platform		= "power5",
 	},
 	{	/* Power5 GS */
@@ -260,9 +246,10 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
-		.cpu_setup		= __setup_cpu_power4,
 		.oprofile_cpu_type	= "ppc64/power5+",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.oprofile_mmcra_sihv	= MMCRA_SIHV,
+		.oprofile_mmcra_sipr	= MMCRA_SIPR,
 		.platform		= "power5+",
 	},
 	{	/* Power6 */
@@ -273,10 +260,13 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_user_features	= COMMON_USER_POWER6,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.num_pmcs		= 6,
-		.cpu_setup		= __setup_cpu_power4,
+		.num_pmcs		= 8,
 		.oprofile_cpu_type	= "ppc64/power6",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
+ 		.oprofile_mmcra_sihv	= POWER6_MMCRA_SIHV,
+ 		.oprofile_mmcra_sipr	= POWER6_MMCRA_SIPR,
+ 		.oprofile_mmcra_clear	= POWER6_MMCRA_THRM |
+ 			POWER6_MMCRA_OTHER,
 		.platform		= "power6",
 	},
 	{	/* Cell Broadband Engine */
@@ -289,7 +279,6 @@ struct cpu_spec	cpu_specs[] = {
 			PPC_FEATURE_SMT,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.cpu_setup		= __setup_cpu_be,
 		.platform		= "ppc-cell-be",
 	},
 	{	/* default match */
@@ -301,7 +290,6 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
-		.cpu_setup		= __setup_cpu_power4,
 		.platform		= "power4",
 	}
 #endif	/* CONFIG_PPC64 */
@@ -323,7 +311,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00030000,
 		.cpu_name		= "603",
 		.cpu_features		= CPU_FTRS_603,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
@@ -334,7 +322,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00060000,
 		.cpu_name		= "603e",
 		.cpu_features		= CPU_FTRS_603,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
@@ -345,7 +333,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00070000,
 		.cpu_name		= "603ev",
 		.cpu_features		= CPU_FTRS_603,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
@@ -356,7 +344,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00040000,
 		.cpu_name		= "604",
 		.cpu_features		= CPU_FTRS_604,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 2,
@@ -368,7 +356,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00090000,
 		.cpu_name		= "604e",
 		.cpu_features		= CPU_FTRS_604,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -380,7 +368,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00090000,
 		.cpu_name		= "604r",
 		.cpu_features		= CPU_FTRS_604,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -392,7 +380,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x000a0000,
 		.cpu_name		= "604ev",
 		.cpu_features		= CPU_FTRS_604,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -404,7 +392,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00084202,
 		.cpu_name		= "740/750",
 		.cpu_features		= CPU_FTRS_740_NOTAU,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -416,7 +404,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00080100,
 		.cpu_name		= "750CX",
 		.cpu_features		= CPU_FTRS_750,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -428,7 +416,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00082200,
 		.cpu_name		= "750CX",
 		.cpu_features		= CPU_FTRS_750,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -440,7 +428,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00082210,
 		.cpu_name		= "750CXe",
 		.cpu_features		= CPU_FTRS_750,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -452,7 +440,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00083214,
 		.cpu_name		= "750CXe",
 		.cpu_features		= CPU_FTRS_750,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -464,7 +452,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00083000,
 		.cpu_name		= "745/755",
 		.cpu_features		= CPU_FTRS_750,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -476,7 +464,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x70000100,
 		.cpu_name		= "750FX",
 		.cpu_features		= CPU_FTRS_750FX1,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -488,7 +476,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x70000200,
 		.cpu_name		= "750FX",
 		.cpu_features		= CPU_FTRS_750FX2,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -500,7 +488,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x70000000,
 		.cpu_name		= "750FX",
 		.cpu_features		= CPU_FTRS_750FX,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -512,7 +500,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x70020000,
 		.cpu_name		= "750GX",
 		.cpu_features		= CPU_FTRS_750GX,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -524,7 +512,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00080000,
 		.cpu_name		= "740/750",
 		.cpu_features		= CPU_FTRS_740,
-		.cpu_user_features	= COMMON_USER,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -536,7 +524,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x000c1101,
 		.cpu_name		= "7400 (1.1)",
 		.cpu_features		= CPU_FTRS_7400_NOTAU,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -548,7 +537,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x000c0000,
 		.cpu_name		= "7400",
 		.cpu_features		= CPU_FTRS_7400,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -560,7 +550,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x800c0000,
 		.cpu_name		= "7410",
 		.cpu_features		= CPU_FTRS_7400,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -572,7 +563,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80000200,
 		.cpu_name		= "7450",
 		.cpu_features		= CPU_FTRS_7450_20,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -586,7 +578,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80000201,
 		.cpu_name		= "7450",
 		.cpu_features		= CPU_FTRS_7450_21,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -600,7 +593,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80000000,
 		.cpu_name		= "7450",
 		.cpu_features		= CPU_FTRS_7450_23,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -614,7 +608,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80010100,
 		.cpu_name		= "7455",
 		.cpu_features		= CPU_FTRS_7455_1,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -628,7 +623,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80010200,
 		.cpu_name		= "7455",
 		.cpu_features		= CPU_FTRS_7455_20,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -642,7 +638,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80010000,
 		.cpu_name		= "7455",
 		.cpu_features		= CPU_FTRS_7455,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -656,7 +653,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80020100,
 		.cpu_name		= "7447/7457",
 		.cpu_features		= CPU_FTRS_7447_10,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -670,7 +668,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80020101,
 		.cpu_name		= "7447/7457",
 		.cpu_features		= CPU_FTRS_7447_10,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -684,7 +683,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80020000,
 		.cpu_name		= "7447/7457",
 		.cpu_features		= CPU_FTRS_7447,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -698,7 +697,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80030000,
 		.cpu_name		= "7447A",
 		.cpu_features		= CPU_FTRS_7447A,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -712,7 +712,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x80040000,
 		.cpu_name		= "7448",
 		.cpu_features		= CPU_FTRS_7447A,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.cpu_user_features	= COMMON_USER |
+			PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -721,6 +722,18 @@ struct cpu_spec	cpu_specs[] = {
 		.oprofile_type		= PPC_OPROFILE_G4,
 		.platform		= "ppc7450",
 	},
+        {       /* 8641 */
+               .pvr_mask               = 0xffffffff,
+               .pvr_value              = 0x80040010,
+               .cpu_name               = "8641",
+               .cpu_features           = CPU_FTRS_7447A,
+               .cpu_user_features      = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
+               .icache_bsize           = 32,
+               .dcache_bsize           = 32,
+               .num_pmcs               = 6,
+               .cpu_setup              = __setup_cpu_745x
+        },
+
 	{	/* 82xx (8240, 8245, 8260 are all 603e cores) */
 		.pvr_mask		= 0x7fff0000,
 		.pvr_value		= 0x00810000,

arch/powerpc/kernel/crash.c

@@ -22,6 +22,7 @@
 #include <linux/elf.h>
 #include <linux/elfcore.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/types.h>
 
 #include <asm/processor.h>
@@ -174,6 +175,8 @@ static void crash_kexec_prepare_cpus(void)
 
 void default_machine_crash_shutdown(struct pt_regs *regs)
 {
+	unsigned int irq;
+
 	/*
 	 * This function is only called after the system
 	 * has paniced or is otherwise in a critical state.
@@ -186,6 +189,16 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	 */
 	local_irq_disable();
 
+	for_each_irq(irq) {
+		struct irq_desc *desc = irq_descp(irq);
+
+		if (desc->status & IRQ_INPROGRESS)
+			desc->handler->end(irq);
+
+		if (!(desc->status & IRQ_DISABLED))
+			desc->handler->disable(irq);
+	}
+
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(1, 0);
 

arch/powerpc/kernel/crash_dump.c

@@ -25,6 +25,11 @@
 #define DBG(fmt...)
 #endif
 
+void reserve_kdump_trampoline(void)
+{
+	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+}
+
 static void __init create_trampoline(unsigned long addr)
 {
 	/* The maximum range of a single instruction branch, is the current
@@ -39,11 +44,11 @@ static void __init create_trampoline(unsigned long addr)
 	create_branch(addr + 4, addr + PHYSICAL_START, 0);
 }
 
-void __init kdump_setup(void)
+void __init setup_kdump_trampoline(void)
 {
 	unsigned long i;
 
-	DBG(" -> kdump_setup()\n");
+	DBG(" -> setup_kdump_trampoline()\n");
 
 	for (i = KDUMP_TRAMPOLINE_START; i < KDUMP_TRAMPOLINE_END; i += 8) {
 		create_trampoline(i);
@@ -52,7 +57,7 @@ void __init kdump_setup(void)
 	create_trampoline(__pa(system_reset_fwnmi) - PHYSICAL_START);
 	create_trampoline(__pa(machine_check_fwnmi) - PHYSICAL_START);
 
-	DBG(" <- kdump_setup()\n");
+	DBG(" <- setup_kdump_trampoline()\n");
 }
 
 #ifdef CONFIG_PROC_VMCORE

arch/powerpc/kernel/entry_64.S

@@ -57,6 +57,7 @@ system_call_common:
 	beq-	1f
 	ld	r1,PACAKSAVE(r13)
 1:	std	r10,0(r1)
+	crclr	so
 	std	r11,_NIP(r1)
 	std	r12,_MSR(r1)
 	std	r0,GPR0(r1)
@@ -75,7 +76,6 @@ system_call_common:
 	std	r11,GPR11(r1)
 	std	r11,GPR12(r1)
 	std	r9,GPR13(r1)
-	crclr	so
 	mfcr	r9
 	mflr	r10
 	li	r11,0xc01

arch/powerpc/kernel/fpu.S

@@ -72,7 +72,7 @@ _GLOBAL(load_up_fpu)
 	std	r12,_MSR(r1)
 #endif
 	lfd	fr0,THREAD_FPSCR(r5)
-	mtfsf	0xff,fr0
+	MTFSF_L(fr0)
 	REST_32FPRS(0, r5)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
@@ -127,7 +127,7 @@ _GLOBAL(giveup_fpu)
 
 _GLOBAL(cvt_fd)
 	lfd	0,THREAD_FPSCR(r5)	/* load up fpscr value */
-	mtfsf	0xff,0
+	MTFSF_L(0)
 	lfs	0,0(r3)
 	stfd	0,0(r4)
 	mffs	0
@@ -136,7 +136,7 @@ _GLOBAL(cvt_fd)
 
 _GLOBAL(cvt_df)
 	lfd	0,THREAD_FPSCR(r5)	/* load up fpscr value */
-	mtfsf	0xff,0
+	MTFSF_L(0)
 	lfd	0,0(r3)
 	stfs	0,0(r4)
 	mffs	0

arch/powerpc/kernel/head_32.S

@@ -973,6 +973,13 @@ __secondary_start_gemini:
         b       __secondary_start
 #endif /* CONFIG_GEMINI */
 
+	.globl __secondary_start_mpc86xx
+__secondary_start_mpc86xx:
+	mfspr	r3, SPRN_PIR
+	stw	r3, __secondary_hold_acknowledge@l(0)
+	mr	r24, r3			/* cpu # */
+	b	__secondary_start
+
 	.globl	__secondary_start_pmac_0
 __secondary_start_pmac_0:
 	/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
@@ -1088,7 +1095,12 @@ load_up_mmu:
 	LOAD_BAT(1,r3,r4,r5)
 	LOAD_BAT(2,r3,r4,r5)
 	LOAD_BAT(3,r3,r4,r5)
-
+BEGIN_FTR_SECTION
+	LOAD_BAT(4,r3,r4,r5)
+	LOAD_BAT(5,r3,r4,r5)
+	LOAD_BAT(6,r3,r4,r5)
+	LOAD_BAT(7,r3,r4,r5)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
 	blr
 
 /*

arch/powerpc/kernel/head_64.S

@@ -316,6 +316,21 @@ label##_pSeries:					\
 	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
 
+#define HSTD_EXCEPTION_PSERIES(n, label)		\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
+	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR0,r20;				\
+	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR1,r20;				\
+	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+
 #define STD_EXCEPTION_ISERIES(n, label, area)		\
 	.globl label##_iSeries;				\
 label##_iSeries:					\
@@ -544,8 +559,17 @@ system_call_pSeries:
 
 	STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
 
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
 	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
+#endif /* CONFIG_CBE_RAS */
 	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
 
 	. = 0x3000
 
@@ -827,6 +851,11 @@ machine_check_common:
 #else
 	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
 #endif
+#ifdef CONFIG_CBE_RAS
+	STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
+	STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
+	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
+#endif /* CONFIG_CBE_RAS */
 
 /*
  * Here we have detected that the kernel stack pointer is bad.

arch/powerpc/kernel/iomap.c

@@ -106,8 +106,6 @@ EXPORT_SYMBOL(iowrite32_rep);
 
 void __iomem *ioport_map(unsigned long port, unsigned int len)
 {
-	if (!_IO_IS_VALID(port))
-		return NULL;
 	return (void __iomem *) (port+pci_io_base);
 }
 

arch/powerpc/kernel/iommu.c

@@ -418,10 +418,11 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
  * Build a iommu_table structure.  This contains a bit map which
  * is used to manage allocation of the tce space.
  */
-struct iommu_table *iommu_init_table(struct iommu_table *tbl)
+struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 {
 	unsigned long sz;
 	static int welcomed = 0;
+	struct page *page;
 
 	/* Set aside 1/4 of the table for large allocations. */
 	tbl->it_halfpoint = tbl->it_size * 3 / 4;
@@ -429,10 +430,10 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl)
 	/* number of bytes needed for the bitmap */
 	sz = (tbl->it_size + 7) >> 3;
 
-	tbl->it_map = (unsigned long *)__get_free_pages(GFP_ATOMIC, get_order(sz));
-	if (!tbl->it_map)
+	page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
+	if (!page)
 		panic("iommu_init_table: Can't allocate %ld bytes\n", sz);
-
+	tbl->it_map = page_address(page);
 	memset(tbl->it_map, 0, sz);
 
 	tbl->it_hint = 0;
@@ -536,11 +537,12 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
  * to the dma address (mapping) of the first page.
  */
 void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
-		dma_addr_t *dma_handle, unsigned long mask, gfp_t flag)
+		dma_addr_t *dma_handle, unsigned long mask, gfp_t flag, int node)
 {
 	void *ret = NULL;
 	dma_addr_t mapping;
 	unsigned int npages, order;
+	struct page *page;
 
 	size = PAGE_ALIGN(size);
 	npages = size >> PAGE_SHIFT;
@@ -560,9 +562,10 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
 		return NULL;
 
 	/* Alloc enough pages (and possibly more) */
-	ret = (void *)__get_free_pages(flag, order);
-	if (!ret)
+	page = alloc_pages_node(node, flag, order);
+	if (!page)
 		return NULL;
+	ret = page_address(page);
 	memset(ret, 0, size);
 
 	/* Set up tces to cover the allocated range */
@@ -570,9 +573,9 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
 			      mask >> PAGE_SHIFT, order);
 	if (mapping == DMA_ERROR_CODE) {
 		free_pages((unsigned long)ret, order);
-		ret = NULL;
-	} else
-		*dma_handle = mapping;
+		return NULL;
+	}
+	*dma_handle = mapping;
 	return ret;
 }
 

arch/powerpc/kernel/irq.c

@@ -47,6 +47,7 @@
 #include <linux/cpumask.h>
 #include <linux/profile.h>
 #include <linux/bitops.h>
+#include <linux/pci.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -436,6 +437,30 @@ void do_softirq(void)
 }
 EXPORT_SYMBOL(do_softirq);
 
+#ifdef CONFIG_PCI_MSI
+int pci_enable_msi(struct pci_dev * pdev)
+{
+	if (ppc_md.enable_msi)
+		return ppc_md.enable_msi(pdev);
+	else
+		return -1;
+}
+
+void pci_disable_msi(struct pci_dev * pdev)
+{
+	if (ppc_md.disable_msi)
+		ppc_md.disable_msi(pdev);
+}
+
+void pci_scan_msi_device(struct pci_dev *dev) {}
+int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) {return -1;}
+void pci_disable_msix(struct pci_dev *dev) {}
+void msi_remove_pci_irq_vectors(struct pci_dev *dev) {}
+void disable_msi_mode(struct pci_dev *dev, int pos, int type) {}
+void pci_no_msi(void) {}
+
+#endif
+
 #ifdef CONFIG_PPC64
 static int __init setup_noirqdistrib(char *str)
 {

arch/powerpc/kernel/lparcfg.c

@@ -521,10 +521,10 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 
 	current_weight = (resource >> 5 * 8) & 0xFF;
 
-	pr_debug("%s: current_entitled = %lu, current_weight = %lu\n",
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
 		 __FUNCTION__, current_entitled, current_weight);
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %lu\n",
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
 		 __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
 
 	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,

arch/powerpc/kernel/machine_kexec_64.c

@@ -21,6 +21,7 @@
 #include <asm/machdep.h>
 #include <asm/cacheflush.h>
 #include <asm/paca.h>
+#include <asm/lmb.h>
 #include <asm/mmu.h>
 #include <asm/sections.h>	/* _end */
 #include <asm/prom.h>
@@ -335,7 +336,105 @@ static void __init export_htab_values(void)
 	of_node_put(node);
 }
 
+static struct property crashk_base_prop = {
+	.name = "linux,crashkernel-base",
+	.length = sizeof(unsigned long),
+	.value = (unsigned char *)&crashk_res.start,
+};
+
+static unsigned long crashk_size;
+
+static struct property crashk_size_prop = {
+	.name = "linux,crashkernel-size",
+	.length = sizeof(unsigned long),
+	.value = (unsigned char *)&crashk_size,
+};
+
+static void __init export_crashk_values(void)
+{
+	struct device_node *node;
+	struct property *prop;
+
+	node = of_find_node_by_path("/chosen");
+	if (!node)
+		return;
+
+	/* There might be existing crash kernel properties, but we can't
+	 * be sure what's in them, so remove them. */
+	prop = of_find_property(node, "linux,crashkernel-base", NULL);
+	if (prop)
+		prom_remove_property(node, prop);
+
+	prop = of_find_property(node, "linux,crashkernel-size", NULL);
+	if (prop)
+		prom_remove_property(node, prop);
+
+	if (crashk_res.start != 0) {
+		prom_add_property(node, &crashk_base_prop);
+		crashk_size = crashk_res.end - crashk_res.start + 1;
+		prom_add_property(node, &crashk_size_prop);
+	}
+
+	of_node_put(node);
+}
+
 void __init kexec_setup(void)
 {
 	export_htab_values();
+	export_crashk_values();
+}
+
+static int __init early_parse_crashk(char *p)
+{
+	unsigned long size;
+
+	if (!p)
+		return 1;
+
+	size = memparse(p, &p);
+
+	if (*p == '@')
+		crashk_res.start = memparse(p + 1, &p);
+	else
+		crashk_res.start = KDUMP_KERNELBASE;
+
+	crashk_res.end = crashk_res.start + size - 1;
+
+	return 0;
+}
+early_param("crashkernel", early_parse_crashk);
+
+void __init reserve_crashkernel(void)
+{
+	unsigned long size;
+
+	if (crashk_res.start == 0)
+		return;
+
+	/* We might have got these values via the command line or the
+	 * device tree, either way sanitise them now. */
+
+	size = crashk_res.end - crashk_res.start + 1;
+
+	if (crashk_res.start != KDUMP_KERNELBASE)
+		printk("Crash kernel location must be 0x%x\n",
+				KDUMP_KERNELBASE);
+
+	crashk_res.start = KDUMP_KERNELBASE;
+	size = PAGE_ALIGN(size);
+	crashk_res.end = crashk_res.start + size - 1;
+
+	/* Crash kernel trumps memory limit */
+	if (memory_limit && memory_limit <= crashk_res.end) {
+		memory_limit = crashk_res.end + 1;
+		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
+				memory_limit);
+	}
+
+	lmb_reserve(crashk_res.start, size);
+}
+
+int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+	return (start + size) > crashk_res.start && start <= crashk_res.end;
 }

arch/powerpc/kernel/misc_32.S

@@ -216,7 +216,7 @@ _GLOBAL(call_setup_cpu)
 	lwz	r4,0(r4)
 	add	r4,r4,r3
 	lwz	r5,CPU_SPEC_SETUP(r4)
-	cmpi	0,r5,0
+	cmpwi	0,r5,0
 	add	r5,r5,r3
 	beqlr
 	mtctr	r5

arch/powerpc/kernel/misc_64.S

@@ -482,7 +482,9 @@ _GLOBAL(identify_cpu)
 	sub	r0,r3,r5
 	std	r0,0(r4)
 	ld	r4,CPU_SPEC_SETUP(r3)
+	cmpdi	0,r4,0
 	add	r4,r4,r5
+	beqlr
 	ld	r4,0(r4)
 	add	r4,r4,r5
 	mtctr	r4
@@ -768,9 +770,6 @@ _GLOBAL(giveup_altivec)
 
 #endif /* CONFIG_ALTIVEC */
 
-_GLOBAL(__setup_cpu_power3)
-	blr
-
 _GLOBAL(execve)
 	li	r0,__NR_execve
 	sc

arch/powerpc/kernel/nvram_64.c

@@ -204,7 +204,7 @@ static void nvram_print_partitions(char * label)
 	printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
 	list_for_each(p, &nvram_part->partition) {
 		tmp_part = list_entry(p, struct nvram_partition, partition);
-		printk(KERN_WARNING "%d    \t%02x\t%02x\t%d\t%s\n",
+		printk(KERN_WARNING "%4d    \t%02x\t%02x\t%d\t%s\n",
 		       tmp_part->index, tmp_part->header.signature,
 		       tmp_part->header.checksum, tmp_part->header.length,
 		       tmp_part->header.name);

arch/powerpc/kernel/pci_32.c

@@ -1113,9 +1113,10 @@ check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
 	int	i;
 	int	rc = 0;
 
-#define push_end(res, size) do { unsigned long __sz = (size) ; \
-	res->end = ((res->end + __sz) / (__sz + 1)) * (__sz + 1) + __sz; \
-    } while (0)
+#define push_end(res, mask) do {		\
+	BUG_ON((mask+1) & mask);		\
+	res->end = (res->end + mask) | mask;	\
+} while (0)
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		u16 class = dev->class >> 8;

arch/powerpc/kernel/pci_64.c

@@ -42,14 +42,6 @@
 unsigned long pci_probe_only = 1;
 int pci_assign_all_buses = 0;
 
-/*
- * legal IO pages under MAX_ISA_PORT.  This is to ensure we don't touch
- * devices we don't have access to.
- */
-unsigned long io_page_mask;
-
-EXPORT_SYMBOL(io_page_mask);
-
 #ifdef CONFIG_PPC_MULTIPLATFORM
 static void fixup_resource(struct resource *res, struct pci_dev *dev);
 static void do_bus_setup(struct pci_bus *bus);
@@ -235,8 +227,10 @@ struct pci_controller * pcibios_alloc_controller(struct device_node *dev)
 	pci_setup_pci_controller(phb);
 	phb->arch_data = dev;
 	phb->is_dynamic = mem_init_done;
-	if (dev)
+	if (dev) {
+		PHB_SET_NODE(phb, of_node_to_nid(dev));
 		add_linux_pci_domain(dev, phb);
+	}
 	return phb;
 }
 
@@ -396,7 +390,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 
 	dev->current_state = 4;		/* unknown power state */
 
-	if (!strcmp(type, "pci")) {
+	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
 		/* a PCI-PCI bridge */
 		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
 		dev->rom_base_reg = PCI_ROM_ADDRESS1;
@@ -605,7 +599,7 @@ static int __init pcibios_init(void)
 	iSeries_pcibios_init(); 
 #endif
 
-	printk("PCI: Probing PCI hardware\n");
+	printk(KERN_DEBUG "PCI: Probing PCI hardware\n");
 
 	/* Scan all of the recorded PCI controllers.  */
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
@@ -630,14 +624,14 @@ static int __init pcibios_init(void)
 	/* Cache the location of the ISA bridge (if we have one) */
 	ppc64_isabridge_dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
 	if (ppc64_isabridge_dev != NULL)
-		printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
+		printk(KERN_DEBUG "ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
 	/* map in PCI I/O space */
 	phbs_remap_io();
 #endif
 
-	printk("PCI: Probing PCI hardware done\n");
+	printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
 
 	return 0;
 }
@@ -804,7 +798,7 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
 	else
 		prot |= _PAGE_GUARDED;
 
-	printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
+	printk(KERN_DEBUG "PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
 	       prot);
 
 	return __pgprot(prot);
@@ -894,8 +888,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	return ret;
 }
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
-static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t pci_show_devspec(struct device *dev,
+		struct device_attribute *attr, char *buf)
 {
 	struct pci_dev *pdev;
 	struct device_node *np;
@@ -907,13 +901,10 @@ static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *att
 	return sprintf(buf, "%s", np->full_name);
 }
 static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
 
 void pcibios_add_platform_entries(struct pci_dev *pdev)
 {
-#ifdef CONFIG_PPC_MULTIPLATFORM
 	device_create_file(&pdev->dev, &dev_attr_devspec);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
 }
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
@@ -1104,8 +1095,6 @@ void __init pci_setup_phb_io(struct pci_controller *hose, int primary)
 			pci_process_ISA_OF_ranges(isa_dn, hose->io_base_phys,
 						hose->io_base_virt);
 			of_node_put(isa_dn);
-			/* Allow all IO */
-			io_page_mask = -1;
 		}
 	}
 
@@ -1212,7 +1201,7 @@ int remap_bus_range(struct pci_bus *bus)
 		return 1;
 	if (start_phys == 0)
 		return 1;
-	printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
+	printk(KERN_DEBUG "mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
 	if (__ioremap_explicit(start_phys, start_virt, size,
 			       _PAGE_NO_CACHE | _PAGE_GUARDED))
 		return 1;
@@ -1232,27 +1221,13 @@ static void phbs_remap_io(void)
 static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	unsigned long start, end, mask, offset;
+	unsigned long offset;
 
 	if (res->flags & IORESOURCE_IO) {
 		offset = (unsigned long)hose->io_base_virt - pci_io_base;
 
-		start = res->start += offset;
-		end = res->end += offset;
-
-		/* Need to allow IO access to pages that are in the
-		   ISA range */
-		if (start < MAX_ISA_PORT) {
-			if (end > MAX_ISA_PORT)
-				end = MAX_ISA_PORT;
-
-			start >>= PAGE_SHIFT;
-			end >>= PAGE_SHIFT;
-
-			/* get the range of pages for the map */
-			mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1);
-			io_page_mask |= mask;
-		}
+		res->start += offset;
+		res->end += offset;
 	} else if (res->flags & IORESOURCE_MEM) {
 		res->start += hose->pci_mem_offset;
 		res->end += hose->pci_mem_offset;
@@ -1442,3 +1417,12 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus,
 
 	return -EOPNOTSUPP;
 }
+
+#ifdef CONFIG_NUMA
+int pcibus_to_node(struct pci_bus *bus)
+{
+	struct pci_controller *phb = pci_bus_to_host(bus);
+	return phb->node;
+}
+EXPORT_SYMBOL(pcibus_to_node);
+#endif

arch/powerpc/kernel/pci_direct_iommu.c

@@ -82,13 +82,17 @@ static int pci_direct_dma_supported(struct device *dev, u64 mask)
 	return mask < 0x100000000ull;
 }
 
+static struct dma_mapping_ops pci_direct_ops = {
+	.alloc_coherent = pci_direct_alloc_coherent,
+	.free_coherent = pci_direct_free_coherent,
+	.map_single = pci_direct_map_single,
+	.unmap_single = pci_direct_unmap_single,
+	.map_sg = pci_direct_map_sg,
+	.unmap_sg = pci_direct_unmap_sg,
+	.dma_supported = pci_direct_dma_supported,
+};
+
 void __init pci_direct_iommu_init(void)
 {
-	pci_dma_ops.alloc_coherent = pci_direct_alloc_coherent;
-	pci_dma_ops.free_coherent = pci_direct_free_coherent;
-	pci_dma_ops.map_single = pci_direct_map_single;
-	pci_dma_ops.unmap_single = pci_direct_unmap_single;
-	pci_dma_ops.map_sg = pci_direct_map_sg;
-	pci_dma_ops.unmap_sg = pci_direct_unmap_sg;
-	pci_dma_ops.dma_supported = pci_direct_dma_supported;
+	pci_dma_ops = pci_direct_ops;
 }

arch/powerpc/kernel/pci_dn.c

@@ -31,6 +31,7 @@
 #include <asm/pci-bridge.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/ppc-pci.h>
+#include <asm/firmware.h>
 
 /*
  * Traverse_func that inits the PCI fields of the device node.
@@ -59,6 +60,11 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 		pdn->busno = (regs[0] >> 16) & 0xff;
 		pdn->devfn = (regs[0] >> 8) & 0xff;
 	}
+	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+		u32 *busp = (u32 *)get_property(dn, "linux,subbus", NULL);
+		if (busp)
+			pdn->bussubno = *busp;
+	}
 
 	pdn->pci_ext_config_space = (type && *type == 1);
 	return NULL;

arch/powerpc/kernel/pci_iommu.c

@@ -44,16 +44,16 @@
  */
 #define PCI_GET_DN(dev) ((struct device_node *)((dev)->sysdata))
 
-static inline struct iommu_table *devnode_table(struct device *dev)
+static inline struct iommu_table *device_to_table(struct device *hwdev)
 {
 	struct pci_dev *pdev;
 
-	if (!dev) {
+	if (!hwdev) {
 		pdev = ppc64_isabridge_dev;
 		if (!pdev)
 			return NULL;
 	} else
-		pdev = to_pci_dev(dev);
+		pdev = to_pci_dev(hwdev);
 
 	return PCI_DN(PCI_GET_DN(pdev))->iommu_table;
 }
@@ -85,14 +85,15 @@ static inline unsigned long device_to_mask(struct device *hwdev)
 static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t flag)
 {
-	return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
-			device_to_mask(hwdev), flag);
+	return iommu_alloc_coherent(device_to_table(hwdev), size, dma_handle,
+			device_to_mask(hwdev), flag,
+			pcibus_to_node(to_pci_dev(hwdev)->bus));
 }
 
 static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
 			 void *vaddr, dma_addr_t dma_handle)
 {
-	iommu_free_coherent(devnode_table(hwdev), size, vaddr, dma_handle);
+	iommu_free_coherent(device_to_table(hwdev), size, vaddr, dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be 
@@ -104,7 +105,7 @@ static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
 static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr,
 		size_t size, enum dma_data_direction direction)
 {
-	return iommu_map_single(devnode_table(hwdev), vaddr, size,
+	return iommu_map_single(device_to_table(hwdev), vaddr, size,
 			        device_to_mask(hwdev), direction);
 }
 
@@ -112,27 +113,27 @@ static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr,
 static void pci_iommu_unmap_single(struct device *hwdev, dma_addr_t dma_handle,
 		size_t size, enum dma_data_direction direction)
 {
-	iommu_unmap_single(devnode_table(hwdev), dma_handle, size, direction);
+	iommu_unmap_single(device_to_table(hwdev), dma_handle, size, direction);
 }
 
 
 static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction)
 {
-	return iommu_map_sg(pdev, devnode_table(pdev), sglist,
+	return iommu_map_sg(pdev, device_to_table(pdev), sglist,
 			nelems, device_to_mask(pdev), direction);
 }
 
 static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction)
 {
-	iommu_unmap_sg(devnode_table(pdev), sglist, nelems, direction);
+	iommu_unmap_sg(device_to_table(pdev), sglist, nelems, direction);
 }
 
 /* We support DMA to/from any memory page via the iommu */
 static int pci_iommu_dma_supported(struct device *dev, u64 mask)
 {
-	struct iommu_table *tbl = devnode_table(dev);
+	struct iommu_table *tbl = device_to_table(dev);
 
 	if (!tbl || tbl->it_offset > mask) {
 		printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n");
@@ -147,13 +148,17 @@ static int pci_iommu_dma_supported(struct device *dev, u64 mask)
 		return 1;
 }
 
+struct dma_mapping_ops pci_iommu_ops = {
+	.alloc_coherent = pci_iommu_alloc_coherent,
+	.free_coherent = pci_iommu_free_coherent,
+	.map_single = pci_iommu_map_single,
+	.unmap_single = pci_iommu_unmap_single,
+	.map_sg = pci_iommu_map_sg,
+	.unmap_sg = pci_iommu_unmap_sg,
+	.dma_supported = pci_iommu_dma_supported,
+};
+
 void pci_iommu_init(void)
 {
-	pci_dma_ops.alloc_coherent = pci_iommu_alloc_coherent;
-	pci_dma_ops.free_coherent = pci_iommu_free_coherent;
-	pci_dma_ops.map_single = pci_iommu_map_single;
-	pci_dma_ops.unmap_single = pci_iommu_unmap_single;
-	pci_dma_ops.map_sg = pci_iommu_map_sg;
-	pci_dma_ops.unmap_sg = pci_iommu_unmap_sg;
-	pci_dma_ops.dma_supported = pci_iommu_dma_supported;
+	pci_dma_ops = pci_iommu_ops;
 }

arch/powerpc/kernel/proc_ppc64.c

@@ -52,7 +52,7 @@ static int __init proc_ppc64_create(void)
 	if (!root)
 		return 1;
 
-	if (!machine_is(pseries) && !machine_is(cell))
+	if (!of_find_node_by_path("/rtas"))
 		return 0;
 
 	if (!proc_mkdir("rtas", root))

arch/powerpc/kernel/process.c

@@ -708,6 +708,61 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
 	return put_user(val, (unsigned int __user *) adr);
 }
 
+int set_endian(struct task_struct *tsk, unsigned int val)
+{
+	struct pt_regs *regs = tsk->thread.regs;
+
+	if ((val == PR_ENDIAN_LITTLE && !cpu_has_feature(CPU_FTR_REAL_LE)) ||
+	    (val == PR_ENDIAN_PPC_LITTLE && !cpu_has_feature(CPU_FTR_PPC_LE)))
+		return -EINVAL;
+
+	if (regs == NULL)
+		return -EINVAL;
+
+	if (val == PR_ENDIAN_BIG)
+		regs->msr &= ~MSR_LE;
+	else if (val == PR_ENDIAN_LITTLE || val == PR_ENDIAN_PPC_LITTLE)
+		regs->msr |= MSR_LE;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+int get_endian(struct task_struct *tsk, unsigned long adr)
+{
+	struct pt_regs *regs = tsk->thread.regs;
+	unsigned int val;
+
+	if (!cpu_has_feature(CPU_FTR_PPC_LE) &&
+	    !cpu_has_feature(CPU_FTR_REAL_LE))
+		return -EINVAL;
+
+	if (regs == NULL)
+		return -EINVAL;
+
+	if (regs->msr & MSR_LE) {
+		if (cpu_has_feature(CPU_FTR_REAL_LE))
+			val = PR_ENDIAN_LITTLE;
+		else
+			val = PR_ENDIAN_PPC_LITTLE;
+	} else
+		val = PR_ENDIAN_BIG;
+
+	return put_user(val, (unsigned int __user *)adr);
+}
+
+int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
+{
+	tsk->thread.align_ctl = val;
+	return 0;
+}
+
+int get_unalign_ctl(struct task_struct *tsk, unsigned long adr)
+{
+	return put_user(tsk->thread.align_ctl, (unsigned int __user *)adr);
+}
+
 #define TRUNC_PTR(x)	((typeof(x))(((unsigned long)(x)) & 0xffffffff))
 
 int sys_clone(unsigned long clone_flags, unsigned long usp,

arch/powerpc/kernel/prom.c

@@ -50,6 +50,7 @@
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/pci-bridge.h>
+#include <asm/kexec.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) printk(KERN_ERR fmt)
@@ -836,6 +837,42 @@ static unsigned long __init unflatten_dt_node(unsigned long mem,
 	return mem;
 }
 
+static int __init early_parse_mem(char *p)
+{
+	if (!p)
+		return 1;
+
+	memory_limit = PAGE_ALIGN(memparse(p, &p));
+	DBG("memory limit = 0x%lx\n", memory_limit);
+
+	return 0;
+}
+early_param("mem", early_parse_mem);
+
+/*
+ * The device tree may be allocated below our memory limit, or inside the
+ * crash kernel region for kdump. If so, move it out now.
+ */
+static void move_device_tree(void)
+{
+	unsigned long start, size;
+	void *p;
+
+	DBG("-> move_device_tree\n");
+
+	start = __pa(initial_boot_params);
+	size = initial_boot_params->totalsize;
+
+	if ((memory_limit && (start + size) > memory_limit) ||
+			overlaps_crashkernel(start, size)) {
+		p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+		memcpy(p, initial_boot_params, size);
+		initial_boot_params = (struct boot_param_header *)p;
+		DBG("Moved device tree to 0x%p\n", p);
+	}
+
+	DBG("<- move_device_tree\n");
+}
 
 /**
  * unflattens the device-tree passed by the firmware, creating the
@@ -911,7 +948,10 @@ static struct ibm_pa_feature {
 	{CPU_FTR_CTRL, 0,		0, 3, 0},
 	{CPU_FTR_NOEXECUTE, 0,		0, 6, 0},
 	{CPU_FTR_NODSISRALIGN, 0,	1, 1, 1},
+#if 0
+	/* put this back once we know how to test if firmware does 64k IO */
 	{CPU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
+#endif
 };
 
 static void __init check_cpu_pa_features(unsigned long node)
@@ -1070,6 +1110,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 		iommu_force_on = 1;
 #endif
 
+	/* mem=x on the command line is the preferred mechanism */
  	lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
  	if (lprop)
  		memory_limit = *lprop;
@@ -1123,17 +1164,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 
 	DBG("Command line is: %s\n", cmd_line);
 
-	if (strstr(cmd_line, "mem=")) {
-		char *p, *q;
-
-		for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
-			q = p + 4;
-			if (p > cmd_line && p[-1] != ' ')
-				continue;
-			memory_limit = memparse(q, &q);
-		}
-	}
-
 	/* break now */
 	return 1;
 }
@@ -1237,9 +1267,17 @@ static void __init early_reserve_mem(void)
 {
 	u64 base, size;
 	u64 *reserve_map;
+	unsigned long self_base;
+	unsigned long self_size;
 
 	reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
 					initial_boot_params->off_mem_rsvmap);
+
+	/* before we do anything, lets reserve the dt blob */
+	self_base = __pa((unsigned long)initial_boot_params);
+	self_size = initial_boot_params->totalsize;
+	lmb_reserve(self_base, self_size);
+
 #ifdef CONFIG_PPC32
 	/* 
 	 * Handle the case where we might be booting from an old kexec
@@ -1254,6 +1292,9 @@ static void __init early_reserve_mem(void)
 			size_32 = *(reserve_map_32++);
 			if (size_32 == 0)
 				break;
+			/* skip if the reservation is for the blob */
+			if (base_32 == self_base && size_32 == self_size)
+				continue;
 			DBG("reserving: %x -> %x\n", base_32, size_32);
 			lmb_reserve(base_32, size_32);
 		}
@@ -1265,6 +1306,9 @@ static void __init early_reserve_mem(void)
 		size = *(reserve_map++);
 		if (size == 0)
 			break;
+		/* skip if the reservation is for the blob */
+		if (base == self_base && size == self_size)
+			continue;
 		DBG("reserving: %llx -> %llx\n", base, size);
 		lmb_reserve(base, size);
 	}
@@ -1292,18 +1336,26 @@ void __init early_init_devtree(void *params)
 	lmb_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-	lmb_enforce_memory_limit(memory_limit);
-	lmb_analyze();
 
-	DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+	/* Save command line for /proc/cmdline and then parse parameters */
+	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+	parse_early_param();
 
 	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
 	lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
-#ifdef CONFIG_CRASH_DUMP
-	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
-#endif
+	reserve_kdump_trampoline();
+	reserve_crashkernel();
 	early_reserve_mem();
 
+	lmb_enforce_memory_limit(memory_limit);
+	lmb_analyze();
+
+	DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+
+	/* We may need to relocate the flat tree, do it now.
+	 * FIXME .. and the initrd too? */
+	move_device_tree();
+
 	DBG("Scanning CPUs ...\n");
 
 	/* Retreive CPU related informations from the flat tree
@@ -2053,29 +2105,46 @@ int prom_update_property(struct device_node *np,
 	return 0;
 }
 
-#ifdef CONFIG_KEXEC
-/* We may have allocated the flat device tree inside the crash kernel region
- * in prom_init. If so we need to move it out into regular memory. */
-void kdump_move_device_tree(void)
-{
-	unsigned long start, end;
-	struct boot_param_header *new;
-
-	start = __pa((unsigned long)initial_boot_params);
-	end = start + initial_boot_params->totalsize;
-
-	if (end < crashk_res.start || start > crashk_res.end)
-		return;
 
-	new = (struct boot_param_header*)
-		__va(lmb_alloc(initial_boot_params->totalsize, PAGE_SIZE));
-
-	memcpy(new, initial_boot_params, initial_boot_params->totalsize);
+/* Find the device node for a given logical cpu number, also returns the cpu
+ * local thread number (index in ibm,interrupt-server#s) if relevant and
+ * asked for (non NULL)
+ */
+struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
+{
+	int hardid;
+	struct device_node *np;
 
-	initial_boot_params = new;
+	hardid = get_hard_smp_processor_id(cpu);
 
-	DBG("Flat device tree blob moved to %p\n", initial_boot_params);
+	for_each_node_by_type(np, "cpu") {
+		u32 *intserv;
+		unsigned int plen, t;
 
-	/* XXX should we unreserve the old DT? */
+		/* Check for ibm,ppc-interrupt-server#s. If it doesn't exist
+		 * fallback to "reg" property and assume no threads
+		 */
+		intserv = (u32 *)get_property(np, "ibm,ppc-interrupt-server#s",
+					      &plen);
+		if (intserv == NULL) {
+			u32 *reg = (u32 *)get_property(np, "reg", NULL);
+			if (reg == NULL)
+				continue;
+			if (*reg == hardid) {
+				if (thread)
+					*thread = 0;
+				return np;
+			}
+		} else {
+			plen /= sizeof(u32);
+			for (t = 0; t < plen; t++) {
+				if (hardid == intserv[t]) {
+					if (thread)
+						*thread = t;
+					return np;
+				}
+			}
+		}
+	}
+	return NULL;
 }
-#endif /* CONFIG_KEXEC */

arch/powerpc/kernel/prom_init.c

@@ -194,19 +194,12 @@ static int __initdata of_platform;
 
 static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
 
-static unsigned long __initdata prom_memory_limit;
-
 static unsigned long __initdata alloc_top;
 static unsigned long __initdata alloc_top_high;
 static unsigned long __initdata alloc_bottom;
 static unsigned long __initdata rmo_top;
 static unsigned long __initdata ram_top;
 
-#ifdef CONFIG_KEXEC
-static unsigned long __initdata prom_crashk_base;
-static unsigned long __initdata prom_crashk_size;
-#endif
-
 static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE];
 static int __initdata mem_reserve_cnt;
 
@@ -574,7 +567,7 @@ static void __init early_cmdline_parse(void)
 	if ((long)_prom->chosen > 0)
 		l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
 #ifdef CONFIG_CMDLINE
-	if (l == 0) /* dbl check */
+	if (l <= 0 || p[0] == '\0') /* dbl check */
 		strlcpy(RELOC(prom_cmd_line),
 			RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line));
 #endif /* CONFIG_CMDLINE */
@@ -593,45 +586,6 @@ static void __init early_cmdline_parse(void)
 			RELOC(iommu_force_on) = 1;
 	}
 #endif
-
-	opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
-	if (opt) {
-		opt += 4;
-		RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
-#ifdef CONFIG_PPC64
-		/* Align to 16 MB == size of ppc64 large page */
-		RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
-#endif
-	}
-
-#ifdef CONFIG_KEXEC
-	/*
-	 * crashkernel=size@addr specifies the location to reserve for
-	 * crash kernel.
-	 */
-	opt = strstr(RELOC(prom_cmd_line), RELOC("crashkernel="));
-	if (opt) {
-		opt += 12;
-		RELOC(prom_crashk_size) = 
-			prom_memparse(opt, (const char **)&opt);
-
-		if (ALIGN(RELOC(prom_crashk_size), 0x1000000) !=
-			RELOC(prom_crashk_size)) {
-			prom_printf("Warning: crashkernel size is not "
-					"aligned to 16MB\n");
-		}
-
-		/*
-		 * At present, the crash kernel always run at 32MB.
-		 * Just ignore whatever user passed.
-		 */
-		RELOC(prom_crashk_base) = 0x2000000;
-		if (*opt == '@') {
-			prom_printf("Warning: PPC64 kdump kernel always runs "
-					"at 32 MB\n");
-		}
-	}
-#endif
 }
 
 #ifdef CONFIG_PPC_PSERIES
@@ -1115,29 +1069,6 @@ static void __init prom_init_mem(void)
 			RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
 	}
 
-	/*
-	 * If prom_memory_limit is set we reduce the upper limits *except* for
-	 * alloc_top_high. This must be the real top of RAM so we can put
-	 * TCE's up there.
-	 */
-
-	RELOC(alloc_top_high) = RELOC(ram_top);
-
-	if (RELOC(prom_memory_limit)) {
-		if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
-			prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
-				RELOC(prom_memory_limit));
-			RELOC(prom_memory_limit) = 0;
-		} else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
-			prom_printf("Ignoring mem=%x >= ram_top.\n",
-				RELOC(prom_memory_limit));
-			RELOC(prom_memory_limit) = 0;
-		} else {
-			RELOC(ram_top) = RELOC(prom_memory_limit);
-			RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
-		}
-	}
-
 	/*
 	 * Setup our top alloc point, that is top of RMO or top of
 	 * segment 0 when running non-LPAR.
@@ -1150,20 +1081,14 @@ static void __init prom_init_mem(void)
 		RELOC(rmo_top) = RELOC(ram_top);
 	RELOC(rmo_top) = min(0x30000000ul, RELOC(rmo_top));
 	RELOC(alloc_top) = RELOC(rmo_top);
+	RELOC(alloc_top_high) = RELOC(ram_top);
 
 	prom_printf("memory layout at init:\n");
-	prom_printf("  memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
 	prom_printf("  alloc_bottom : %x\n", RELOC(alloc_bottom));
 	prom_printf("  alloc_top    : %x\n", RELOC(alloc_top));
 	prom_printf("  alloc_top_hi : %x\n", RELOC(alloc_top_high));
 	prom_printf("  rmo_top      : %x\n", RELOC(rmo_top));
 	prom_printf("  ram_top      : %x\n", RELOC(ram_top));
-#ifdef CONFIG_KEXEC
-	if (RELOC(prom_crashk_base)) {
-		prom_printf("  crashk_base  : %x\n",  RELOC(prom_crashk_base));
-		prom_printf("  crashk_size  : %x\n", RELOC(prom_crashk_size));
-	}
-#endif
 }
 
 
@@ -1349,16 +1274,10 @@ static void __init prom_initialize_tce_table(void)
 
 	reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom);
 
-	if (RELOC(prom_memory_limit)) {
-		/*
-		 * We align the start to a 16MB boundary so we can map
-		 * the TCE area using large pages if possible.
-		 * The end should be the top of RAM so no need to align it.
-		 */
-		RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom,
-							  0x1000000);
-		RELOC(prom_tce_alloc_end) = local_alloc_top;
-	}
+	/* These are only really needed if there is a memory limit in
+	 * effect, but we don't know so export them always. */
+	RELOC(prom_tce_alloc_start) = local_alloc_bottom;
+	RELOC(prom_tce_alloc_end) = local_alloc_top;
 
 	/* Flag the first invalid entry */
 	prom_debug("ending prom_initialize_tce_table\n");
@@ -2041,11 +1960,7 @@ static void __init flatten_device_tree(void)
 	/* Version 16 is not backward compatible */
 	hdr->last_comp_version = 0x10;
 
-	/* Reserve the whole thing and copy the reserve map in, we
-	 * also bump mem_reserve_cnt to cause further reservations to
-	 * fail since it's too late.
-	 */
-	reserve_mem(RELOC(dt_header_start), hdr->totalsize);
+	/* Copy the reserve map in */
 	memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map));
 
 #ifdef DEBUG_PROM
@@ -2058,6 +1973,9 @@ static void __init flatten_device_tree(void)
 				    RELOC(mem_reserve_map)[i].size);
 	}
 #endif
+	/* Bump mem_reserve_cnt to cause further reservations to fail
+	 * since it's too late.
+	 */
 	RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE;
 
 	prom_printf("Device tree strings 0x%x -> 0x%x\n",
@@ -2280,10 +2198,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 */
 	prom_init_mem();
 
-#ifdef CONFIG_KEXEC
-	if (RELOC(prom_crashk_base))
-		reserve_mem(RELOC(prom_crashk_base), RELOC(prom_crashk_size));
-#endif
 	/*
 	 * Determine which cpu is actually running right _now_
 	 */
@@ -2317,10 +2231,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	/*
 	 * Fill in some infos for use by the kernel later on
 	 */
-	if (RELOC(prom_memory_limit))
-		prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
-			     &RELOC(prom_memory_limit),
-			     sizeof(prom_memory_limit));
 #ifdef CONFIG_PPC64
 	if (RELOC(ppc64_iommu_off))
 		prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
@@ -2340,16 +2250,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	}
 #endif
 
-#ifdef CONFIG_KEXEC
-	if (RELOC(prom_crashk_base)) {
-		prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-base",
-			PTRRELOC(&prom_crashk_base),
-			sizeof(RELOC(prom_crashk_base)));
-		prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-size",
-			PTRRELOC(&prom_crashk_size),
-			sizeof(RELOC(prom_crashk_size)));
-	}
-#endif
 	/*
 	 * Fixup any known bugs in the device-tree
 	 */

arch/powerpc/kernel/prom_parse.c

@@ -548,3 +548,28 @@ int of_pci_address_to_resource(struct device_node *dev, int bar,
 	return __of_address_to_resource(dev, addrp, size, flags, r);
 }
 EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
+		unsigned long *busno, unsigned long *phys, unsigned long *size)
+{
+	u32 *dma_window, cells;
+	unsigned char *prop;
+
+	dma_window = (u32 *)dma_window_prop;
+
+	/* busno is always one cell */
+	*busno = *(dma_window++);
+
+	prop = get_property(dn, "ibm,#dma-address-cells", NULL);
+	if (!prop)
+		prop = get_property(dn, "#address-cells", NULL);
+
+	cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
+	*phys = of_read_addr(dma_window, cells);
+
+	dma_window += cells;
+
+	prop = get_property(dn, "ibm,#dma-size-cells", NULL);
+	cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
+	*size = of_read_addr(dma_window, cells);
+}

arch/powerpc/kernel/ptrace.c

@@ -404,7 +404,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_detach(child, data);
 		break;
 
-#ifdef CONFIG_PPC64
 	case PPC_PTRACE_GETREGS: { /* Get GPRs 0 - 31. */
 		int i;
 		unsigned long *reg = &((unsigned long *)child->thread.regs)[0];
@@ -468,7 +467,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 	}
-#endif /* CONFIG_PPC64 */
 
 #ifdef CONFIG_ALTIVEC
 	case PTRACE_GETVRREGS:

arch/powerpc/kernel/rtas-rtc.c

@@ -14,19 +14,20 @@
 unsigned long __init rtas_get_boot_time(void)
 {
 	int ret[8];
-	int error, wait_time;
+	int error;
+	unsigned int wait_time;
 	u64 max_wait_tb;
 
 	max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
 	do {
 		error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
-		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
-			wait_time = rtas_extended_busy_delay_time(error);
+
+		wait_time = rtas_busy_delay_time(error);
+		if (wait_time) {
 			/* This is boot time so we spin. */
 			udelay(wait_time*1000);
-			error = RTAS_CLOCK_BUSY;
 		}
-	} while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+	} while (wait_time && (get_tb() < max_wait_tb));
 
 	if (error != 0 && printk_ratelimit()) {
 		printk(KERN_WARNING "error: reading the clock failed (%d)\n",
@@ -44,24 +45,25 @@ unsigned long __init rtas_get_boot_time(void)
 void rtas_get_rtc_time(struct rtc_time *rtc_tm)
 {
         int ret[8];
-	int error, wait_time;
+	int error;
+	unsigned int wait_time;
 	u64 max_wait_tb;
 
 	max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
 	do {
 		error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
-		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
+
+		wait_time = rtas_busy_delay_time(error);
+		if (wait_time) {
 			if (in_interrupt() && printk_ratelimit()) {
 				memset(rtc_tm, 0, sizeof(struct rtc_time));
 				printk(KERN_WARNING "error: reading clock"
 				       " would delay interrupt\n");
 				return;	/* delay not allowed */
 			}
-			wait_time = rtas_extended_busy_delay_time(error);
 			msleep(wait_time);
-			error = RTAS_CLOCK_BUSY;
 		}
-	} while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+	} while (wait_time && (get_tb() < max_wait_tb));
 
         if (error != 0 && printk_ratelimit()) {
                 printk(KERN_WARNING "error: reading the clock failed (%d)\n",
@@ -88,14 +90,14 @@ int rtas_set_rtc_time(struct rtc_time *tm)
 				  tm->tm_year + 1900, tm->tm_mon + 1,
 				  tm->tm_mday, tm->tm_hour, tm->tm_min,
 				  tm->tm_sec, 0);
-		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
+
+		wait_time = rtas_busy_delay_time(error);
+		if (wait_time) {
 			if (in_interrupt())
 				return 1;	/* probably decrementer */
-			wait_time = rtas_extended_busy_delay_time(error);
 			msleep(wait_time);
-			error = RTAS_CLOCK_BUSY;
 		}
-	} while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+	} while (wait_time && (get_tb() < max_wait_tb));
 
         if (error != 0 && printk_ratelimit())
                 printk(KERN_WARNING "error: setting the clock failed (%d)\n",

arch/powerpc/kernel/rtas.c

@@ -370,24 +370,36 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 	return ret;
 }
 
-/* Given an RTAS status code of 990n compute the hinted delay of 10^n
- * (last digit) milliseconds.  For now we bound at n=5 (100 sec).
+/* For RTAS_BUSY (-2), delay for 1 millisecond.  For an extended busy status
+ * code of 990n, perform the hinted delay of 10^n (last digit) milliseconds.
  */
-unsigned int rtas_extended_busy_delay_time(int status)
+unsigned int rtas_busy_delay_time(int status)
 {
-	int order = status - 9900;
-	unsigned long ms;
+	int order;
+	unsigned int ms = 0;
+
+	if (status == RTAS_BUSY) {
+		ms = 1;
+	} else if (status >= 9900 && status <= 9905) {
+		order = status - 9900;
+		for (ms = 1; order > 0; order--)
+			ms *= 10;
+	}
 
-	if (order < 0)
-		order = 0;	/* RTC depends on this for -2 clock busy */
-	else if (order > 5)
-		order = 5;	/* bound */
+	return ms;
+}
 
-	/* Use microseconds for reasonable accuracy */
-	for (ms = 1; order > 0; order--)
-		ms *= 10;
+/* For an RTAS busy status code, perform the hinted delay. */
+unsigned int rtas_busy_delay(int status)
+{
+	unsigned int ms;
 
-	return ms; 
+	might_sleep();
+	ms = rtas_busy_delay_time(status);
+	if (ms)
+		msleep(ms);
+
+	return ms;
 }
 
 int rtas_error_rc(int rtas_rc)
@@ -438,22 +450,14 @@ int rtas_get_power_level(int powerdomain, int *level)
 int rtas_set_power_level(int powerdomain, int level, int *setlevel)
 {
 	int token = rtas_token("set-power-level");
-	unsigned int wait_time;
 	int rc;
 
 	if (token == RTAS_UNKNOWN_SERVICE)
 		return -ENOENT;
 
-	while (1) {
+	do {
 		rc = rtas_call(token, 2, 2, setlevel, powerdomain, level);
-		if (rc == RTAS_BUSY)
-			udelay(1);
-		else if (rtas_is_extended_busy(rc)) {
-			wait_time = rtas_extended_busy_delay_time(rc);
-			udelay(wait_time * 1000);
-		} else
-			break;
-	}
+	} while (rtas_busy_delay(rc));
 
 	if (rc < 0)
 		return rtas_error_rc(rc);
@@ -463,22 +467,14 @@ int rtas_set_power_level(int powerdomain, int level, int *setlevel)
 int rtas_get_sensor(int sensor, int index, int *state)
 {
 	int token = rtas_token("get-sensor-state");
-	unsigned int wait_time;
 	int rc;
 
 	if (token == RTAS_UNKNOWN_SERVICE)
 		return -ENOENT;
 
-	while (1) {
+	do {
 		rc = rtas_call(token, 2, 2, state, sensor, index);
-		if (rc == RTAS_BUSY)
-			udelay(1);
-		else if (rtas_is_extended_busy(rc)) {
-			wait_time = rtas_extended_busy_delay_time(rc);
-			udelay(wait_time * 1000);
-		} else
-			break;
-	}
+	} while (rtas_busy_delay(rc));
 
 	if (rc < 0)
 		return rtas_error_rc(rc);
@@ -488,23 +484,14 @@ int rtas_get_sensor(int sensor, int index, int *state)
 int rtas_set_indicator(int indicator, int index, int new_value)
 {
 	int token = rtas_token("set-indicator");
-	unsigned int wait_time;
 	int rc;
 
 	if (token == RTAS_UNKNOWN_SERVICE)
 		return -ENOENT;
 
-	while (1) {
+	do {
 		rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
-		if (rc == RTAS_BUSY)
-			udelay(1);
-		else if (rtas_is_extended_busy(rc)) {
-			wait_time = rtas_extended_busy_delay_time(rc);
-			udelay(wait_time * 1000);
-		}
-		else
-			break;
-	}
+	} while (rtas_busy_delay(rc));
 
 	if (rc < 0)
 		return rtas_error_rc(rc);
@@ -555,13 +542,11 @@ void rtas_os_term(char *str)
 	do {
 		status = rtas_call(rtas_token("ibm,os-term"), 1, 1, NULL,
 				   __pa(rtas_os_term_buf));
+	} while (rtas_busy_delay(status));
 
-		if (status == RTAS_BUSY)
-			udelay(1);
-		else if (status != 0)
-			printk(KERN_EMERG "ibm,os-term call failed %d\n",
+	if (status != 0)
+		printk(KERN_EMERG "ibm,os-term call failed %d\n",
 			       status);
-	} while (status == RTAS_BUSY);
 }
 
 static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE;
@@ -608,9 +593,31 @@ out:
 static int rtas_ibm_suspend_me(struct rtas_args *args)
 {
 	int i;
+	long state;
+	long rc;
+	unsigned long dummy;
 
 	struct rtas_suspend_me_data data;
 
+	/* Make sure the state is valid */
+	rc = plpar_hcall(H_VASI_STATE,
+			 ((u64)args->args[0] << 32) | args->args[1],
+			 0, 0, 0,
+			 &state, &dummy, &dummy);
+
+	if (rc) {
+		printk(KERN_ERR "rtas_ibm_suspend_me: vasi_state returned %ld\n",rc);
+		return rc;
+	} else if (state == H_VASI_ENABLED) {
+		args->args[args->nargs] = RTAS_NOT_SUSPENDABLE;
+		return 0;
+	} else if (state != H_VASI_SUSPENDING) {
+		printk(KERN_ERR "rtas_ibm_suspend_me: vasi_state returned state %ld\n",
+		       state);
+		args->args[args->nargs] = -1;
+		return 0;
+	}
+
 	data.waiting = 1;
 	data.args = args;
 
@@ -789,7 +796,8 @@ EXPORT_SYMBOL(rtas_token);
 EXPORT_SYMBOL(rtas_call);
 EXPORT_SYMBOL(rtas_data_buf);
 EXPORT_SYMBOL(rtas_data_buf_lock);
-EXPORT_SYMBOL(rtas_extended_busy_delay_time);
+EXPORT_SYMBOL(rtas_busy_delay_time);
+EXPORT_SYMBOL(rtas_busy_delay);
 EXPORT_SYMBOL(rtas_get_sensor);
 EXPORT_SYMBOL(rtas_get_power_level);
 EXPORT_SYMBOL(rtas_set_power_level);

arch/powerpc/kernel/rtas_flash.c

@@ -365,20 +365,12 @@ static int rtas_excl_release(struct inode *inode, struct file *file)
 
 static void manage_flash(struct rtas_manage_flash_t *args_buf)
 {
-	unsigned int wait_time;
 	s32 rc;
 
-	while (1) {
+	do {
 		rc = rtas_call(rtas_token("ibm,manage-flash-image"), 1, 
 			       1, NULL, args_buf->op);
-		if (rc == RTAS_RC_BUSY)
-			udelay(1);
-		else if (rtas_is_extended_busy(rc)) {
-			wait_time = rtas_extended_busy_delay_time(rc);
-			udelay(wait_time * 1000);
-		} else
-			break;
-	}
+	} while (rtas_busy_delay(rc));
 
 	args_buf->status = rc;
 }
@@ -451,27 +443,18 @@ static ssize_t manage_flash_write(struct file *file, const char __user *buf,
 static void validate_flash(struct rtas_validate_flash_t *args_buf)
 {
 	int token = rtas_token("ibm,validate-flash-image");
-	unsigned int wait_time;
 	int update_results;
 	s32 rc;	
 
 	rc = 0;
-	while(1) {
+	do {
 		spin_lock(&rtas_data_buf_lock);
 		memcpy(rtas_data_buf, args_buf->buf, VALIDATE_BUF_SIZE);
 		rc = rtas_call(token, 2, 2, &update_results, 
 			       (u32) __pa(rtas_data_buf), args_buf->buf_size);
 		memcpy(args_buf->buf, rtas_data_buf, VALIDATE_BUF_SIZE);
 		spin_unlock(&rtas_data_buf_lock);
-			
-		if (rc == RTAS_RC_BUSY)
-			udelay(1);
-		else if (rtas_is_extended_busy(rc)) {
-			wait_time = rtas_extended_busy_delay_time(rc);
-			udelay(wait_time * 1000);
-		} else
-			break;
-	}
+	} while (rtas_busy_delay(rc));
 
 	args_buf->status = rc;
 	args_buf->update_results = update_results;

arch/powerpc/kernel/rtas_pci.c

@@ -313,7 +313,9 @@ unsigned long __init find_and_init_phbs(void)
 	for (node = of_get_next_child(root, NULL);
 	     node != NULL;
 	     node = of_get_next_child(root, node)) {
-		if (node->type == NULL || strcmp(node->type, "pci") != 0)
+
+		if (node->type == NULL || (strcmp(node->type, "pci") != 0 &&
+					   strcmp(node->type, "pciex") != 0))
 			continue;
 
 		phb = pcibios_alloc_controller(node);

arch/powerpc/kernel/setup-common.c

@@ -443,6 +443,7 @@ void __init smp_setup_cpu_maps(void)
 }
 #endif /* CONFIG_SMP */
 
+int __initdata do_early_xmon;
 #ifdef CONFIG_XMON
 static int __init early_xmon(char *p)
 {
@@ -456,7 +457,7 @@ static int __init early_xmon(char *p)
 			return 0;
 	}
 	xmon_init(1);
-	debugger(NULL);
+	do_early_xmon = 1;
 
 	return 0;
 }
@@ -524,3 +525,20 @@ int check_legacy_ioport(unsigned long base_port)
 	return ppc_md.check_legacy_ioport(base_port);
 }
 EXPORT_SYMBOL(check_legacy_ioport);
+
+static int ppc_panic_event(struct notifier_block *this,
+                             unsigned long event, void *ptr)
+{
+	ppc_md.panic(ptr);  /* May not return */
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_panic_block = {
+	.notifier_call = ppc_panic_event,
+	.priority = INT_MIN /* may not return; must be done last */
+};
+
+void __init setup_panic(void)
+{
+	atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block);
+}

arch/powerpc/kernel/setup.h

@@ -2,5 +2,8 @@
 #define _POWERPC_KERNEL_SETUP_H
 
 void check_for_initrd(void);
+void do_init_bootmem(void);
+void setup_panic(void);
+extern int do_early_xmon;
 
 #endif /* _POWERPC_KERNEL_SETUP_H */

arch/powerpc/kernel/setup_32.c

@@ -131,12 +131,6 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 	/* Do some early initialization based on the flat device tree */
 	early_init_devtree(__va(dt_ptr));
 
-	/* Check default command line */
-#ifdef CONFIG_CMDLINE
-	if (cmd_line[0] == 0)
-		strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
-#endif /* CONFIG_CMDLINE */
-
 	probe_machine();
 
 #ifdef CONFIG_6xx
@@ -235,7 +229,7 @@ arch_initcall(ppc_init);
 /* Warning, IO base is not yet inited */
 void __init setup_arch(char **cmdline_p)
 {
-	extern void do_init_bootmem(void);
+	*cmdline_p = cmd_line;
 
 	/* so udelay does something sensible, assume <= 1000 bogomips */
 	loops_per_jiffy = 500000000 / HZ;
@@ -285,16 +279,16 @@ void __init setup_arch(char **cmdline_p)
 	/* reboot on panic */
 	panic_timeout = 180;
 
+	if (ppc_md.panic)
+		setup_panic();
+
 	init_mm.start_code = PAGE_OFFSET;
 	init_mm.end_code = (unsigned long) _etext;
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = klimit;
 
-	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
-	*cmdline_p = cmd_line;
-
-	parse_early_param();
+	if (do_early_xmon)
+		debugger(NULL);
 
 	/* set up the bootmem stuff with available memory */
 	do_init_bootmem();

arch/powerpc/kernel/setup_64.c

@@ -100,12 +100,6 @@ unsigned long SYSRQ_KEY;
 #endif /* CONFIG_MAGIC_SYSRQ */
 
 
-static int ppc64_panic_event(struct notifier_block *, unsigned long, void *);
-static struct notifier_block ppc64_panic_block = {
-	.notifier_call = ppc64_panic_event,
-	.priority = INT_MIN /* may not return; must be done last */
-};
-
 #ifdef CONFIG_SMP
 
 static int smt_enabled_cmdline;
@@ -199,9 +193,7 @@ void __init early_setup(unsigned long dt_ptr)
 	/* Probe the machine type */
 	probe_machine();
 
-#ifdef CONFIG_CRASH_DUMP
-	kdump_setup();
-#endif
+	setup_kdump_trampoline();
 
 	DBG("Found, Initializing memory management...\n");
 
@@ -353,9 +345,6 @@ void __init setup_system(void)
 {
 	DBG(" -> setup_system()\n");
 
-#ifdef CONFIG_KEXEC
-	kdump_move_device_tree();
-#endif
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
 	 */
@@ -420,10 +409,8 @@ void __init setup_system(void)
 	 */
 	register_early_udbg_console();
 
-	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
-
-	parse_early_param();
+	if (do_early_xmon)
+		debugger(NULL);
 
 	check_smt_enabled();
 	smp_setup_cpu_maps();
@@ -456,13 +443,6 @@ void __init setup_system(void)
 	DBG(" <- setup_system()\n");
 }
 
-static int ppc64_panic_event(struct notifier_block *this,
-                             unsigned long event, void *ptr)
-{
-	ppc_md.panic((char *)ptr);  /* May not return */
-	return NOTIFY_DONE;
-}
-
 #ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
@@ -517,8 +497,6 @@ static void __init emergency_stack_init(void)
  */
 void __init setup_arch(char **cmdline_p)
 {
-	extern void do_init_bootmem(void);
-
 	ppc64_boot_msg(0x12, "Setup Arch");
 
 	*cmdline_p = cmd_line;
@@ -535,8 +513,7 @@ void __init setup_arch(char **cmdline_p)
 	panic_timeout = 180;
 
 	if (ppc_md.panic)
-		atomic_notifier_chain_register(&panic_notifier_list,
-				&ppc64_panic_block);
+		setup_panic();
 
 	init_mm.start_code = PAGE_OFFSET;
 	init_mm.end_code = (unsigned long) _etext;

arch/powerpc/kernel/signal_32.c

@@ -419,9 +419,7 @@ static long restore_user_regs(struct pt_regs *regs,
 {
 	long err;
 	unsigned int save_r2 = 0;
-#if defined(CONFIG_ALTIVEC) || defined(CONFIG_SPE)
 	unsigned long msr;
-#endif
 
 	/*
 	 * restore general registers but not including MSR or SOFTE. Also
@@ -430,11 +428,16 @@ static long restore_user_regs(struct pt_regs *regs,
 	if (!sig)
 		save_r2 = (unsigned int)regs->gpr[2];
 	err = restore_general_regs(regs, sr);
+	err |= __get_user(msr, &sr->mc_gregs[PT_MSR]);
 	if (!sig)
 		regs->gpr[2] = (unsigned long) save_r2;
 	if (err)
 		return 1;
 
+	/* if doing signal return, restore the previous little-endian mode */
+	if (sig)
+		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
+
 	/*
 	 * Do this before updating the thread state in
 	 * current->thread.fpr/vr/evr.  That way, if we get preempted
@@ -455,7 +458,7 @@ static long restore_user_regs(struct pt_regs *regs,
 	/* force the process to reload the altivec registers from
 	   current->thread when it next does altivec instructions */
 	regs->msr &= ~MSR_VEC;
-	if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_VEC) != 0) {
+	if (msr & MSR_VEC) {
 		/* restore altivec registers from the stack */
 		if (__copy_from_user(current->thread.vr, &sr->mc_vregs,
 				     sizeof(sr->mc_vregs)))
@@ -472,7 +475,7 @@ static long restore_user_regs(struct pt_regs *regs,
 	/* force the process to reload the spe registers from
 	   current->thread when it next does spe instructions */
 	regs->msr &= ~MSR_SPE;
-	if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_SPE) != 0) {
+	if (msr & MSR_SPE) {
 		/* restore spe registers from the stack */
 		if (__copy_from_user(current->thread.evr, &sr->mc_vregs,
 				     ELF_NEVRREG * sizeof(u32)))
@@ -757,10 +760,10 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka,
 
 	/* Save user registers on the stack */
 	frame = &rt_sf->uc.uc_mcontext;
-	if (vdso32_rt_sigtramp && current->thread.vdso_base) {
+	if (vdso32_rt_sigtramp && current->mm->context.vdso_base) {
 		if (save_user_regs(regs, frame, 0))
 			goto badframe;
-		regs->link = current->thread.vdso_base + vdso32_rt_sigtramp;
+		regs->link = current->mm->context.vdso_base + vdso32_rt_sigtramp;
 	} else {
 		if (save_user_regs(regs, frame, __NR_rt_sigreturn))
 			goto badframe;
@@ -777,6 +780,8 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka,
 	regs->gpr[5] = (unsigned long) &rt_sf->uc;
 	regs->gpr[6] = (unsigned long) rt_sf;
 	regs->nip = (unsigned long) ka->sa.sa_handler;
+	/* enter the signal handler in big-endian mode */
+	regs->msr &= ~MSR_LE;
 	regs->trap = 0;
 	return 1;
 
@@ -1038,10 +1043,10 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka,
 	    || __put_user(sig, &sc->signal))
 		goto badframe;
 
-	if (vdso32_sigtramp && current->thread.vdso_base) {
+	if (vdso32_sigtramp && current->mm->context.vdso_base) {
 		if (save_user_regs(regs, &frame->mctx, 0))
 			goto badframe;
-		regs->link = current->thread.vdso_base + vdso32_sigtramp;
+		regs->link = current->mm->context.vdso_base + vdso32_sigtramp;
 	} else {
 		if (save_user_regs(regs, &frame->mctx, __NR_sigreturn))
 			goto badframe;
@@ -1056,6 +1061,8 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka,
 	regs->gpr[3] = sig;
 	regs->gpr[4] = (unsigned long) sc;
 	regs->nip = (unsigned long) ka->sa.sa_handler;
+	/* enter the signal handler in big-endian mode */
+	regs->msr &= ~MSR_LE;
 	regs->trap = 0;
 
 	return 1;

arch/powerpc/kernel/signal_64.c

@@ -141,9 +141,7 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	unsigned long err = 0;
 	unsigned long save_r13 = 0;
 	elf_greg_t *gregs = (elf_greg_t *)regs;
-#ifdef CONFIG_ALTIVEC
 	unsigned long msr;
-#endif
 	int i;
 
 	/* If this is not a signal return, we preserve the TLS in r13 */
@@ -154,7 +152,12 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	err |= __copy_from_user(regs, &sc->gp_regs,
 				PT_MSR*sizeof(unsigned long));
 
-	/* skip MSR and SOFTE */
+	/* get MSR separately, transfer the LE bit if doing signal return */
+	err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
+	if (sig)
+		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
+
+	/* skip SOFTE */
 	for (i = PT_MSR+1; i <= PT_RESULT; i++) {
 		if (i == PT_SOFTE)
 			continue;
@@ -179,7 +182,6 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 
 #ifdef CONFIG_ALTIVEC
 	err |= __get_user(v_regs, &sc->v_regs);
-	err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
 	if (err)
 		return err;
 	if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128)))
@@ -396,8 +398,8 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
 	current->thread.fpscr.val = 0;
 
 	/* Set up to return from userspace. */
-	if (vdso64_rt_sigtramp && current->thread.vdso_base) {
-		regs->link = current->thread.vdso_base + vdso64_rt_sigtramp;
+	if (vdso64_rt_sigtramp && current->mm->context.vdso_base) {
+		regs->link = current->mm->context.vdso_base + vdso64_rt_sigtramp;
 	} else {
 		err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]);
 		if (err)
@@ -412,6 +414,8 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
 
 	/* Set up "regs" so we "return" to the signal handler. */
 	err |= get_user(regs->nip, &funct_desc_ptr->entry);
+	/* enter the signal handler in big-endian mode */
+	regs->msr &= ~MSR_LE;
 	regs->gpr[1] = newsp;
 	err |= get_user(regs->gpr[2], &funct_desc_ptr->toc);
 	regs->gpr[3] = signr;

arch/powerpc/kernel/smp.c

@@ -492,7 +492,7 @@ int __devinit __cpu_up(unsigned int cpu)
 	 * -- Cort
 	 */
 	if (system_state < SYSTEM_RUNNING)
-		for (c = 5000; c && !cpu_callin_map[cpu]; c--)
+		for (c = 50000; c && !cpu_callin_map[cpu]; c--)
 			udelay(100);
 #ifdef CONFIG_HOTPLUG_CPU
 	else

arch/powerpc/kernel/systbl.S

@@ -32,6 +32,10 @@
 #define SYS32ONLY(func)		.long	sys_##func
 #define SYSX(f, f3264, f32)	.long	f32
 #endif
+#define SYSCALL_SPU(func)	SYSCALL(func)
+#define COMPAT_SYS_SPU(func)	COMPAT_SYS(func)
+#define PPC_SYS_SPU(func)	PPC_SYS(func)
+#define SYSX_SPU(f, f3264, f32)	SYSX(f, f3264, f32)
 
 #ifdef CONFIG_PPC64
 #define sys_sigpending	sys_ni_syscall
@@ -39,309 +43,4 @@
 #endif
 
 _GLOBAL(sys_call_table)
-SYSCALL(restart_syscall)
-SYSCALL(exit)
-PPC_SYS(fork)
-SYSCALL(read)
-SYSCALL(write)
-COMPAT_SYS(open)
-SYSCALL(close)
-COMPAT_SYS(waitpid)
-COMPAT_SYS(creat)
-SYSCALL(link)
-SYSCALL(unlink)
-COMPAT_SYS(execve)
-SYSCALL(chdir)
-COMPAT_SYS(time)
-SYSCALL(mknod)
-SYSCALL(chmod)
-SYSCALL(lchown)
-SYSCALL(ni_syscall)
-OLDSYS(stat)
-SYSX(sys_lseek,ppc32_lseek,sys_lseek)
-SYSCALL(getpid)
-COMPAT_SYS(mount)
-SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount)
-SYSCALL(setuid)
-SYSCALL(getuid)
-COMPAT_SYS(stime)
-COMPAT_SYS(ptrace)
-SYSCALL(alarm)
-OLDSYS(fstat)
-COMPAT_SYS(pause)
-COMPAT_SYS(utime)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-COMPAT_SYS(access)
-COMPAT_SYS(nice)
-SYSCALL(ni_syscall)
-SYSCALL(sync)
-COMPAT_SYS(kill)
-SYSCALL(rename)
-COMPAT_SYS(mkdir)
-SYSCALL(rmdir)
-SYSCALL(dup)
-SYSCALL(pipe)
-COMPAT_SYS(times)
-SYSCALL(ni_syscall)
-SYSCALL(brk)
-SYSCALL(setgid)
-SYSCALL(getgid)
-SYSCALL(signal)
-SYSCALL(geteuid)
-SYSCALL(getegid)
-SYSCALL(acct)
-SYSCALL(umount)
-SYSCALL(ni_syscall)
-COMPAT_SYS(ioctl)
-COMPAT_SYS(fcntl)
-SYSCALL(ni_syscall)
-COMPAT_SYS(setpgid)
-SYSCALL(ni_syscall)
-SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
-COMPAT_SYS(umask)
-SYSCALL(chroot)
-SYSCALL(ustat)
-SYSCALL(dup2)
-SYSCALL(getppid)
-SYSCALL(getpgrp)
-SYSCALL(setsid)
-SYS32ONLY(sigaction)
-SYSCALL(sgetmask)
-COMPAT_SYS(ssetmask)
-SYSCALL(setreuid)
-SYSCALL(setregid)
-SYS32ONLY(sigsuspend)
-COMPAT_SYS(sigpending)
-COMPAT_SYS(sethostname)
-COMPAT_SYS(setrlimit)
-COMPAT_SYS(old_getrlimit)
-COMPAT_SYS(getrusage)
-COMPAT_SYS(gettimeofday)
-COMPAT_SYS(settimeofday)
-COMPAT_SYS(getgroups)
-COMPAT_SYS(setgroups)
-SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select)
-SYSCALL(symlink)
-OLDSYS(lstat)
-COMPAT_SYS(readlink)
-SYSCALL(uselib)
-SYSCALL(swapon)
-SYSCALL(reboot)
-SYSX(sys_ni_syscall,old32_readdir,old_readdir)
-SYSCALL(mmap)
-SYSCALL(munmap)
-SYSCALL(truncate)
-SYSCALL(ftruncate)
-SYSCALL(fchmod)
-SYSCALL(fchown)
-COMPAT_SYS(getpriority)
-COMPAT_SYS(setpriority)
-SYSCALL(ni_syscall)
-COMPAT_SYS(statfs)
-COMPAT_SYS(fstatfs)
-SYSCALL(ni_syscall)
-COMPAT_SYS(socketcall)
-COMPAT_SYS(syslog)
-COMPAT_SYS(setitimer)
-COMPAT_SYS(getitimer)
-COMPAT_SYS(newstat)
-COMPAT_SYS(newlstat)
-COMPAT_SYS(newfstat)
-SYSX(sys_ni_syscall,sys_uname,sys_uname)
-SYSCALL(ni_syscall)
-SYSCALL(vhangup)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-COMPAT_SYS(wait4)
-SYSCALL(swapoff)
-COMPAT_SYS(sysinfo)
-COMPAT_SYS(ipc)
-SYSCALL(fsync)
-SYS32ONLY(sigreturn)
-PPC_SYS(clone)
-COMPAT_SYS(setdomainname)
-PPC_SYS(newuname)
-SYSCALL(ni_syscall)
-COMPAT_SYS(adjtimex)
-SYSCALL(mprotect)
-SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask)
-SYSCALL(ni_syscall)
-SYSCALL(init_module)
-SYSCALL(delete_module)
-SYSCALL(ni_syscall)
-SYSCALL(quotactl)
-COMPAT_SYS(getpgid)
-SYSCALL(fchdir)
-SYSCALL(bdflush)
-COMPAT_SYS(sysfs)
-SYSX(ppc64_personality,ppc64_personality,sys_personality)
-SYSCALL(ni_syscall)
-SYSCALL(setfsuid)
-SYSCALL(setfsgid)
-SYSCALL(llseek)
-COMPAT_SYS(getdents)
-SYSX(sys_select,ppc32_select,ppc_select)
-SYSCALL(flock)
-SYSCALL(msync)
-COMPAT_SYS(readv)
-COMPAT_SYS(writev)
-COMPAT_SYS(getsid)
-SYSCALL(fdatasync)
-COMPAT_SYS(sysctl)
-SYSCALL(mlock)
-SYSCALL(munlock)
-SYSCALL(mlockall)
-SYSCALL(munlockall)
-COMPAT_SYS(sched_setparam)
-COMPAT_SYS(sched_getparam)
-COMPAT_SYS(sched_setscheduler)
-COMPAT_SYS(sched_getscheduler)
-SYSCALL(sched_yield)
-COMPAT_SYS(sched_get_priority_max)
-COMPAT_SYS(sched_get_priority_min)
-COMPAT_SYS(sched_rr_get_interval)
-COMPAT_SYS(nanosleep)
-SYSCALL(mremap)
-SYSCALL(setresuid)
-SYSCALL(getresuid)
-SYSCALL(ni_syscall)
-SYSCALL(poll)
-COMPAT_SYS(nfsservctl)
-SYSCALL(setresgid)
-SYSCALL(getresgid)
-COMPAT_SYS(prctl)
-COMPAT_SYS(rt_sigreturn)
-COMPAT_SYS(rt_sigaction)
-COMPAT_SYS(rt_sigprocmask)
-COMPAT_SYS(rt_sigpending)
-COMPAT_SYS(rt_sigtimedwait)
-COMPAT_SYS(rt_sigqueueinfo)
-COMPAT_SYS(rt_sigsuspend)
-COMPAT_SYS(pread64)
-COMPAT_SYS(pwrite64)
-SYSCALL(chown)
-SYSCALL(getcwd)
-SYSCALL(capget)
-SYSCALL(capset)
-COMPAT_SYS(sigaltstack)
-SYSX(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-PPC_SYS(vfork)
-COMPAT_SYS(getrlimit)
-COMPAT_SYS(readahead)
-SYS32ONLY(mmap2)
-SYS32ONLY(truncate64)
-SYS32ONLY(ftruncate64)
-SYSX(sys_ni_syscall,sys_stat64,sys_stat64)
-SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64)
-SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64)
-SYSCALL(pciconfig_read)
-SYSCALL(pciconfig_write)
-SYSCALL(pciconfig_iobase)
-SYSCALL(ni_syscall)
-SYSCALL(getdents64)
-SYSCALL(pivot_root)
-SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64)
-SYSCALL(madvise)
-SYSCALL(mincore)
-SYSCALL(gettid)
-SYSCALL(tkill)
-SYSCALL(setxattr)
-SYSCALL(lsetxattr)
-SYSCALL(fsetxattr)
-SYSCALL(getxattr)
-SYSCALL(lgetxattr)
-SYSCALL(fgetxattr)
-SYSCALL(listxattr)
-SYSCALL(llistxattr)
-SYSCALL(flistxattr)
-SYSCALL(removexattr)
-SYSCALL(lremovexattr)
-SYSCALL(fremovexattr)
-COMPAT_SYS(futex)
-COMPAT_SYS(sched_setaffinity)
-COMPAT_SYS(sched_getaffinity)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-SYS32ONLY(sendfile64)
-COMPAT_SYS(io_setup)
-SYSCALL(io_destroy)
-COMPAT_SYS(io_getevents)
-COMPAT_SYS(io_submit)
-SYSCALL(io_cancel)
-SYSCALL(set_tid_address)
-SYSX(sys_fadvise64,ppc32_fadvise64,sys_fadvise64)
-SYSCALL(exit_group)
-SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie)
-SYSCALL(epoll_create)
-SYSCALL(epoll_ctl)
-SYSCALL(epoll_wait)
-SYSCALL(remap_file_pages)
-SYSX(sys_timer_create,compat_sys_timer_create,sys_timer_create)
-COMPAT_SYS(timer_settime)
-COMPAT_SYS(timer_gettime)
-SYSCALL(timer_getoverrun)
-SYSCALL(timer_delete)
-COMPAT_SYS(clock_settime)
-COMPAT_SYS(clock_gettime)
-COMPAT_SYS(clock_getres)
-COMPAT_SYS(clock_nanosleep)
-SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
-COMPAT_SYS(tgkill)
-COMPAT_SYS(utimes)
-COMPAT_SYS(statfs64)
-COMPAT_SYS(fstatfs64)
-SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
-PPC_SYS(rtas)
-OLDSYS(debug_setcontext)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-COMPAT_SYS(mbind)
-COMPAT_SYS(get_mempolicy)
-COMPAT_SYS(set_mempolicy)
-COMPAT_SYS(mq_open)
-SYSCALL(mq_unlink)
-COMPAT_SYS(mq_timedsend)
-COMPAT_SYS(mq_timedreceive)
-COMPAT_SYS(mq_notify)
-COMPAT_SYS(mq_getsetattr)
-COMPAT_SYS(kexec_load)
-COMPAT_SYS(add_key)
-COMPAT_SYS(request_key)
-COMPAT_SYS(keyctl)
-COMPAT_SYS(waitid)
-COMPAT_SYS(ioprio_set)
-COMPAT_SYS(ioprio_get)
-SYSCALL(inotify_init)
-SYSCALL(inotify_add_watch)
-SYSCALL(inotify_rm_watch)
-SYSCALL(spu_run)
-SYSCALL(spu_create)
-COMPAT_SYS(pselect6)
-COMPAT_SYS(ppoll)
-SYSCALL(unshare)
-SYSCALL(splice)
-SYSCALL(tee)
-SYSCALL(vmsplice)
-COMPAT_SYS(openat)
-SYSCALL(mkdirat)
-SYSCALL(mknodat)
-SYSCALL(fchownat)
-COMPAT_SYS(futimesat)
-SYSX(sys_newfstatat, sys_fstatat64, sys_fstatat64)
-SYSCALL(unlinkat)
-SYSCALL(renameat)
-SYSCALL(linkat)
-SYSCALL(symlinkat)
-SYSCALL(readlinkat)
-SYSCALL(fchmodat)
-SYSCALL(faccessat)
-COMPAT_SYS(get_robust_list)
-COMPAT_SYS(set_robust_list)
-
-/*
- * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c
- * as well when appropriate.
- */
+#include <asm/systbl.h>

arch/powerpc/kernel/time.c

@@ -76,7 +76,6 @@
 
 /* keep track of when we need to update the rtc */
 time_t last_rtc_update;
-extern int piranha_simulator;
 #ifdef CONFIG_PPC_ISERIES
 unsigned long iSeries_recal_titan = 0;
 unsigned long iSeries_recal_tb = 0; 
@@ -858,42 +857,50 @@ int do_settimeofday(struct timespec *tv)
 
 EXPORT_SYMBOL(do_settimeofday);
 
-void __init generic_calibrate_decr(void)
+static int __init get_freq(char *name, int cells, unsigned long *val)
 {
 	struct device_node *cpu;
 	unsigned int *fp;
-	int node_found;
+	int found = 0;
 
-	/*
-	 * The cpu node should have a timebase-frequency property
-	 * to tell us the rate at which the decrementer counts.
-	 */
+	/* The cpu node should have timebase and clock frequency properties */
 	cpu = of_find_node_by_type(NULL, "cpu");
 
-	ppc_tb_freq = DEFAULT_TB_FREQ;		/* hardcoded default */
-	node_found = 0;
 	if (cpu) {
-		fp = (unsigned int *)get_property(cpu, "timebase-frequency",
-						  NULL);
+		fp = (unsigned int *)get_property(cpu, name, NULL);
 		if (fp) {
-			node_found = 1;
-			ppc_tb_freq = *fp;
+			found = 1;
+			*val = 0;
+			while (cells--)
+				*val = (*val << 32) | *fp++;
 		}
+
+		of_node_put(cpu);
 	}
-	if (!node_found)
+
+	return found;
+}
+
+void __init generic_calibrate_decr(void)
+{
+	ppc_tb_freq = DEFAULT_TB_FREQ;		/* hardcoded default */
+
+	if (!get_freq("ibm,extended-timebase-frequency", 2, &ppc_tb_freq) &&
+	    !get_freq("timebase-frequency", 1, &ppc_tb_freq)) {
+
 		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
 				"(not found)\n");
+	}
 
-	ppc_proc_freq = DEFAULT_PROC_FREQ;
-	node_found = 0;
-	if (cpu) {
-		fp = (unsigned int *)get_property(cpu, "clock-frequency",
-						  NULL);
-		if (fp) {
-			node_found = 1;
-			ppc_proc_freq = *fp;
-		}
+	ppc_proc_freq = DEFAULT_PROC_FREQ;	/* hardcoded default */
+
+	if (!get_freq("ibm,extended-clock-frequency", 2, &ppc_proc_freq) &&
+	    !get_freq("clock-frequency", 1, &ppc_proc_freq)) {
+
+		printk(KERN_ERR "WARNING: Estimating processor frequency "
+				"(not found)\n");
 	}
+
 #ifdef CONFIG_BOOKE
 	/* Set the time base to zero */
 	mtspr(SPRN_TBWL, 0);
@@ -905,11 +912,6 @@ void __init generic_calibrate_decr(void)
 	/* Enable decrementer interrupt */
 	mtspr(SPRN_TCR, TCR_DIE);
 #endif
-	if (!node_found)
-		printk(KERN_ERR "WARNING: Estimating processor frequency "
-				"(not found)\n");
-
-	of_node_put(cpu);
 }
 
 unsigned long get_boot_time(void)
@@ -945,9 +947,9 @@ void __init time_init(void)
 	} else {
 		/* Normal PowerPC with timebase register */
 		ppc_md.calibrate_decr();
-		printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+		printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n",
 		       ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
-		printk(KERN_INFO "time_init: processor frequency   = %lu.%.6lu MHz\n",
+		printk(KERN_DEBUG "time_init: processor frequency   = %lu.%.6lu MHz\n",
 		       ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
 		tb_last_stamp = tb_last_jiffy = get_tb();
 	}
@@ -1010,10 +1012,7 @@ void __init time_init(void)
 	tb_to_ns_scale = scale;
 	tb_to_ns_shift = shift;
 
-#ifdef CONFIG_PPC_ISERIES
-	if (!piranha_simulator)
-#endif
-		tm = get_boot_time();
+	tm = get_boot_time();
 
 	write_seqlock_irqsave(&xtime_lock, flags);
 

arch/powerpc/kernel/traps.c

@@ -658,7 +658,7 @@ static int emulate_instruction(struct pt_regs *regs)
 	u32 instword;
 	u32 rd;
 
-	if (!user_mode(regs))
+	if (!user_mode(regs) || (regs->msr & MSR_LE))
 		return -EINVAL;
 	CHECK_FULL_REGS(regs);
 
@@ -805,9 +805,11 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 
 void alignment_exception(struct pt_regs *regs)
 {
-	int fixed;
+	int fixed = 0;
 
-	fixed = fix_alignment(regs);
+	/* we don't implement logging of alignment exceptions */
+	if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS))
+		fixed = fix_alignment(regs);
 
 	if (fixed == 1) {
 		regs->nip += 4;	/* skip over emulated instruction */

arch/powerpc/kernel/udbg.c

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/sched.h>
 #include <linux/console.h>
+#include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/udbg.h>
 
@@ -141,12 +142,14 @@ static int early_console_initialized;
 
 void __init disable_early_printk(void)
 {
-#if 1
 	if (!early_console_initialized)
 		return;
+	if (strstr(saved_command_line, "udbg-immortal")) {
+		printk(KERN_INFO "early console immortal !\n");
+		return;
+	}
 	unregister_console(&udbg_console);
 	early_console_initialized = 0;
-#endif
 }
 
 /* called by setup_system */

arch/powerpc/kernel/vdso.c

@@ -223,6 +223,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm,
 	struct vm_area_struct *vma;
 	unsigned long vdso_pages;
 	unsigned long vdso_base;
+	int rc;
 
 #ifdef CONFIG_PPC64
 	if (test_thread_flag(TIF_32BIT)) {
@@ -237,20 +238,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm,
 	vdso_base = VDSO32_MBASE;
 #endif
 
-	current->thread.vdso_base = 0;
+	current->mm->context.vdso_base = 0;
 
 	/* vDSO has a problem and was disabled, just don't "enable" it for the
 	 * process
 	 */
 	if (vdso_pages == 0)
 		return 0;
-
-	vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
-	if (vma == NULL)
-		return -ENOMEM;
-
-	memset(vma, 0, sizeof(*vma));
-
 	/* Add a page to the vdso size for the data page */
 	vdso_pages ++;
 
@@ -259,17 +253,23 @@ int arch_setup_additional_pages(struct linux_binprm *bprm,
 	 * at vdso_base which is the "natural" base for it, but we might fail
 	 * and end up putting it elsewhere.
 	 */
+	down_write(&mm->mmap_sem);
 	vdso_base = get_unmapped_area(NULL, vdso_base,
 				      vdso_pages << PAGE_SHIFT, 0, 0);
-	if (vdso_base & ~PAGE_MASK) {
-		kmem_cache_free(vm_area_cachep, vma);
-		return (int)vdso_base;
+	if (IS_ERR_VALUE(vdso_base)) {
+		rc = vdso_base;
+		goto fail_mmapsem;
 	}
 
-	current->thread.vdso_base = vdso_base;
 
+	/* Allocate a VMA structure and fill it up */
+	vma = kmem_cache_zalloc(vm_area_cachep, SLAB_KERNEL);
+	if (vma == NULL) {
+		rc = -ENOMEM;
+		goto fail_mmapsem;
+	}
 	vma->vm_mm = mm;
-	vma->vm_start = current->thread.vdso_base;
+	vma->vm_start = vdso_base;
 	vma->vm_end = vma->vm_start + (vdso_pages << PAGE_SHIFT);
 
 	/*
@@ -282,23 +282,38 @@ int arch_setup_additional_pages(struct linux_binprm *bprm,
 	 * It's fine to use that for setting breakpoints in the vDSO code
 	 * pages though
 	 */
-	vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
+	vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC;
 	vma->vm_flags |= mm->def_flags;
 	vma->vm_page_prot = protection_map[vma->vm_flags & 0x7];
 	vma->vm_ops = &vdso_vmops;
 
-	down_write(&mm->mmap_sem);
-	if (insert_vm_struct(mm, vma)) {
-		up_write(&mm->mmap_sem);
-		kmem_cache_free(vm_area_cachep, vma);
-		return -ENOMEM;
-	}
+	/* Insert new VMA */
+	rc = insert_vm_struct(mm, vma);
+	if (rc)
+		goto fail_vma;
+
+	/* Put vDSO base into mm struct and account for memory usage */
+	current->mm->context.vdso_base = vdso_base;
 	mm->total_vm += (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	up_write(&mm->mmap_sem);
-
 	return 0;
+
+ fail_vma:
+	kmem_cache_free(vm_area_cachep, vma);
+ fail_mmapsem:
+	up_write(&mm->mmap_sem);
+	return rc;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_mm && vma->vm_start == vma->vm_mm->context.vdso_base)
+		return "[vdso]";
+	return NULL;
 }
 
+
+
 static void * __init find_section32(Elf32_Ehdr *ehdr, const char *secname,
 				  unsigned long *size)
 {

arch/powerpc/kernel/vector.S

@@ -53,12 +53,12 @@ fpenable:
 	stfd	fr31,8(r1)
 	LDCONST(fr1, fpzero)
 	mffs	fr31
-	mtfsf	0xff,fr1
+	MTFSF_L(fr1)
 	blr
 
 fpdisable:
 	mtlr	r12
-	mtfsf	0xff,fr31
+	MTFSF_L(fr31)
 	lfd	fr31,8(r1)
 	lfd	fr1,16(r1)
 	lfd	fr0,24(r1)

arch/powerpc/kernel/vio.c

@@ -13,27 +13,116 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#include <linux/types.h>
+#include <linux/device.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
+#include <linux/kobject.h>
+
 #include <asm/iommu.h>
 #include <asm/dma.h>
 #include <asm/vio.h>
 #include <asm/prom.h>
-
-static const struct vio_device_id *vio_match_device(
-		const struct vio_device_id *, const struct vio_dev *);
-
-struct vio_dev vio_bus_device  = { /* fake "parent" device */
+#include <asm/firmware.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+#include <asm/page.h>
+#include <asm/hvcall.h>
+#include <asm/iseries/vio.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/iseries/hv_call_xm.h>
+#include <asm/iseries/iommu.h>
+
+extern struct subsystem devices_subsys; /* needed for vio_find_name() */
+
+static struct vio_dev vio_bus_device  = { /* fake "parent" device */
 	.name = vio_bus_device.dev.bus_id,
 	.type = "",
 	.dev.bus_id = "vio",
 	.dev.bus = &vio_bus_type,
 };
 
-static struct vio_bus_ops vio_bus_ops;
+#ifdef CONFIG_PPC_ISERIES
+struct device *iSeries_vio_dev = &vio_bus_device.dev;
+EXPORT_SYMBOL(iSeries_vio_dev);
+
+static struct iommu_table veth_iommu_table;
+static struct iommu_table vio_iommu_table;
+
+static void __init iommu_vio_init(void)
+{
+	iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table);
+	veth_iommu_table.it_size /= 2;
+	vio_iommu_table = veth_iommu_table;
+	vio_iommu_table.it_offset += veth_iommu_table.it_size;
+
+	if (!iommu_init_table(&veth_iommu_table, -1))
+		printk("Virtual Bus VETH TCE table failed.\n");
+	if (!iommu_init_table(&vio_iommu_table, -1))
+		printk("Virtual Bus VIO TCE table failed.\n");
+}
+#endif
+
+static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
+{
+#ifdef CONFIG_PPC_ISERIES
+	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+		if (strcmp(dev->type, "network") == 0)
+			return &veth_iommu_table;
+		return &vio_iommu_table;
+	} else
+#endif
+	{
+		unsigned char *dma_window;
+		struct iommu_table *tbl;
+		unsigned long offset, size;
+
+		dma_window = get_property(dev->dev.platform_data,
+				"ibm,my-dma-window", NULL);
+		if (!dma_window)
+			return NULL;
+
+		tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
+
+		of_parse_dma_window(dev->dev.platform_data, dma_window,
+				&tbl->it_index, &offset, &size);
+
+		/* TCE table size - measured in tce entries */
+		tbl->it_size = size >> PAGE_SHIFT;
+		/* offset for VIO should always be 0 */
+		tbl->it_offset = offset >> PAGE_SHIFT;
+		tbl->it_busno = 0;
+		tbl->it_type = TCE_VB;
+
+		return iommu_init_table(tbl, -1);
+	}
+}
+
+/**
+ * vio_match_device: - Tell if a VIO device has a matching
+ *			VIO device id structure.
+ * @ids:	array of VIO device id structures to search in
+ * @dev:	the VIO device structure to match against
+ *
+ * Used by a driver to check whether a VIO device present in the
+ * system is in its list of supported devices. Returns the matching
+ * vio_device_id structure or NULL if there is no match.
+ */
+static const struct vio_device_id *vio_match_device(
+		const struct vio_device_id *ids, const struct vio_dev *dev)
+{
+	while (ids->type[0] != '\0') {
+		if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) &&
+		    device_is_compatible(dev->dev.platform_data, ids->compat))
+			return ids;
+		ids++;
+	}
+	return NULL;
+}
 
 /*
  * Convert from struct device to struct vio_dev and pass to driver.
@@ -106,35 +195,110 @@ void vio_unregister_driver(struct vio_driver *viodrv)
 }
 EXPORT_SYMBOL(vio_unregister_driver);
 
+/* vio_dev refcount hit 0 */
+static void __devinit vio_dev_release(struct device *dev)
+{
+	if (dev->platform_data) {
+		/* XXX free TCE table */
+		of_node_put(dev->platform_data);
+	}
+	kfree(to_vio_dev(dev));
+}
+
 /**
- * vio_match_device: - Tell if a VIO device has a matching
- *			VIO device id structure.
- * @ids:	array of VIO device id structures to search in
- * @dev:	the VIO device structure to match against
+ * vio_register_device_node: - Register a new vio device.
+ * @of_node:	The OF node for this device.
  *
- * Used by a driver to check whether a VIO device present in the
- * system is in its list of supported devices. Returns the matching
- * vio_device_id structure or NULL if there is no match.
+ * Creates and initializes a vio_dev structure from the data in
+ * of_node (dev.platform_data) and adds it to the list of virtual devices.
+ * Returns a pointer to the created vio_dev or NULL if node has
+ * NULL device_type or compatible fields.
  */
-static const struct vio_device_id *vio_match_device(
-		const struct vio_device_id *ids, const struct vio_dev *dev)
+struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
 {
-	while (ids->type[0] != '\0') {
-		if (vio_bus_ops.match(ids, dev))
-			return ids;
-		ids++;
+	struct vio_dev *viodev;
+	unsigned int *unit_address;
+	unsigned int *irq_p;
+
+	/* we need the 'device_type' property, in order to match with drivers */
+	if (of_node->type == NULL) {
+		printk(KERN_WARNING "%s: node %s missing 'device_type'\n",
+				__FUNCTION__,
+				of_node->name ? of_node->name : "<unknown>");
+		return NULL;
 	}
-	return NULL;
+
+	unit_address = (unsigned int *)get_property(of_node, "reg", NULL);
+	if (unit_address == NULL) {
+		printk(KERN_WARNING "%s: node %s missing 'reg'\n",
+				__FUNCTION__,
+				of_node->name ? of_node->name : "<unknown>");
+		return NULL;
+	}
+
+	/* allocate a vio_dev for this node */
+	viodev = kzalloc(sizeof(struct vio_dev), GFP_KERNEL);
+	if (viodev == NULL)
+		return NULL;
+
+	viodev->dev.platform_data = of_node_get(of_node);
+
+	viodev->irq = NO_IRQ;
+	irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL);
+	if (irq_p) {
+		int virq = virt_irq_create_mapping(*irq_p);
+		if (virq == NO_IRQ) {
+			printk(KERN_ERR "Unable to allocate interrupt "
+			       "number for %s\n", of_node->full_name);
+		} else
+			viodev->irq = irq_offset_up(virq);
+	}
+
+	snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address);
+	viodev->name = of_node->name;
+	viodev->type = of_node->type;
+	viodev->unit_address = *unit_address;
+	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+		unit_address = (unsigned int *)get_property(of_node,
+				"linux,unit_address", NULL);
+		if (unit_address != NULL)
+			viodev->unit_address = *unit_address;
+	}
+	viodev->iommu_table = vio_build_iommu_table(viodev);
+
+	/* init generic 'struct device' fields: */
+	viodev->dev.parent = &vio_bus_device.dev;
+	viodev->dev.bus = &vio_bus_type;
+	viodev->dev.release = vio_dev_release;
+
+	/* register with generic device framework */
+	if (device_register(&viodev->dev)) {
+		printk(KERN_ERR "%s: failed to register device %s\n",
+				__FUNCTION__, viodev->dev.bus_id);
+		/* XXX free TCE table */
+		kfree(viodev);
+		return NULL;
+	}
+
+	return viodev;
 }
+EXPORT_SYMBOL(vio_register_device_node);
 
 /**
  * vio_bus_init: - Initialize the virtual IO bus
  */
-int __init vio_bus_init(struct vio_bus_ops *ops)
+static int __init vio_bus_init(void)
 {
 	int err;
+	struct device_node *node_vroot;
 
-	vio_bus_ops = *ops;
+#ifdef CONFIG_PPC_ISERIES
+	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+		iommu_vio_init();
+		vio_bus_device.iommu_table = &vio_iommu_table;
+		iSeries_vio_dev = &vio_bus_device.dev;
+	}
+#endif
 
 	err = bus_register(&vio_bus_type);
 	if (err) {
@@ -153,47 +317,48 @@ int __init vio_bus_init(struct vio_bus_ops *ops)
 		return err;
 	}
 
-	return 0;
-}
+	node_vroot = find_devices("vdevice");
+	if (node_vroot) {
+		struct device_node *of_node;
+
+		/*
+		 * Create struct vio_devices for each virtual device in
+		 * the device tree. Drivers will associate with them later.
+		 */
+		for (of_node = node_vroot->child; of_node != NULL;
+				of_node = of_node->sibling) {
+			printk(KERN_DEBUG "%s: processing %p\n",
+					__FUNCTION__, of_node);
+			vio_register_device_node(of_node);
+		}
+	}
 
-/* vio_dev refcount hit 0 */
-static void __devinit vio_dev_release(struct device *dev)
-{
-	if (vio_bus_ops.release_device)
-		vio_bus_ops.release_device(dev);
-	kfree(to_vio_dev(dev));
+	return 0;
 }
+__initcall(vio_bus_init);
 
-static ssize_t viodev_show_name(struct device *dev,
+static ssize_t name_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%s\n", to_vio_dev(dev)->name);
 }
-DEVICE_ATTR(name, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_name, NULL);
 
-struct vio_dev * __devinit vio_register_device(struct vio_dev *viodev)
+static ssize_t devspec_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
 {
-	/* init generic 'struct device' fields: */
-	viodev->dev.parent = &vio_bus_device.dev;
-	viodev->dev.bus = &vio_bus_type;
-	viodev->dev.release = vio_dev_release;
-
-	/* register with generic device framework */
-	if (device_register(&viodev->dev)) {
-		printk(KERN_ERR "%s: failed to register device %s\n",
-				__FUNCTION__, viodev->dev.bus_id);
-		return NULL;
-	}
-	device_create_file(&viodev->dev, &dev_attr_name);
+	struct device_node *of_node = dev->platform_data;
 
-	return viodev;
+	return sprintf(buf, "%s\n", of_node ? of_node->full_name : "none");
 }
 
+static struct device_attribute vio_dev_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(devspec),
+	__ATTR_NULL
+};
+
 void __devinit vio_unregister_device(struct vio_dev *viodev)
 {
-	if (vio_bus_ops.unregister_device)
-		vio_bus_ops.unregister_device(viodev);
-	device_remove_file(&viodev->dev, &dev_attr_name);
 	device_unregister(&viodev->dev);
 }
 EXPORT_SYMBOL(vio_unregister_device);
@@ -229,7 +394,7 @@ static void *vio_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size,
-			dma_handle, ~0ul, flag);
+			dma_handle, ~0ul, flag, -1);
 }
 
 static void vio_free_coherent(struct device *dev, size_t size,
@@ -267,22 +432,23 @@ static int vio_hotplug(struct device *dev, char **envp, int num_envp,
 			char *buffer, int buffer_size)
 {
 	const struct vio_dev *vio_dev = to_vio_dev(dev);
+	struct device_node *dn = dev->platform_data;
 	char *cp;
 	int length;
 
 	if (!num_envp)
 		return -ENOMEM;
 
-	if (!vio_dev->dev.platform_data)
+	if (!dn)
 		return -ENODEV;
-	cp = (char *)get_property(vio_dev->dev.platform_data, "compatible", &length);
+	cp = (char *)get_property(dn, "compatible", &length);
 	if (!cp)
 		return -ENODEV;
 
 	envp[0] = buffer;
 	length = scnprintf(buffer, buffer_size, "MODALIAS=vio:T%sS%s",
 				vio_dev->type, cp);
-	if (buffer_size - length <= 0)
+	if ((buffer_size - length) <= 0)
 		return -ENOMEM;
 	envp[1] = NULL;
 	return 0;
@@ -290,9 +456,81 @@ static int vio_hotplug(struct device *dev, char **envp, int num_envp,
 
 struct bus_type vio_bus_type = {
 	.name = "vio",
+	.dev_attrs = vio_dev_attrs,
 	.uevent = vio_hotplug,
 	.match = vio_bus_match,
 	.probe = vio_bus_probe,
 	.remove = vio_bus_remove,
 	.shutdown = vio_bus_shutdown,
 };
+
+/**
+ * vio_get_attribute: - get attribute for virtual device
+ * @vdev:	The vio device to get property.
+ * @which:	The property/attribute to be extracted.
+ * @length:	Pointer to length of returned data size (unused if NULL).
+ *
+ * Calls prom.c's get_property() to return the value of the
+ * attribute specified by @which
+*/
+const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length)
+{
+	return get_property(vdev->dev.platform_data, which, length);
+}
+EXPORT_SYMBOL(vio_get_attribute);
+
+#ifdef CONFIG_PPC_PSERIES
+/* vio_find_name() - internal because only vio.c knows how we formatted the
+ * kobject name
+ * XXX once vio_bus_type.devices is actually used as a kset in
+ * drivers/base/bus.c, this function should be removed in favor of
+ * "device_find(kobj_name, &vio_bus_type)"
+ */
+static struct vio_dev *vio_find_name(const char *kobj_name)
+{
+	struct kobject *found;
+
+	found = kset_find_obj(&devices_subsys.kset, kobj_name);
+	if (!found)
+		return NULL;
+
+	return to_vio_dev(container_of(found, struct device, kobj));
+}
+
+/**
+ * vio_find_node - find an already-registered vio_dev
+ * @vnode: device_node of the virtual device we're looking for
+ */
+struct vio_dev *vio_find_node(struct device_node *vnode)
+{
+	uint32_t *unit_address;
+	char kobj_name[BUS_ID_SIZE];
+
+	/* construct the kobject name from the device node */
+	unit_address = (uint32_t *)get_property(vnode, "reg", NULL);
+	if (!unit_address)
+		return NULL;
+	snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address);
+
+	return vio_find_name(kobj_name);
+}
+EXPORT_SYMBOL(vio_find_node);
+
+int vio_enable_interrupts(struct vio_dev *dev)
+{
+	int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
+	if (rc != H_SUCCESS)
+		printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
+	return rc;
+}
+EXPORT_SYMBOL(vio_enable_interrupts);
+
+int vio_disable_interrupts(struct vio_dev *dev)
+{
+	int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
+	if (rc != H_SUCCESS)
+		printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
+	return rc;
+}
+EXPORT_SYMBOL(vio_disable_interrupts);
+#endif /* CONFIG_PPC_PSERIES */

arch/powerpc/kernel/vmlinux.lds.S

@@ -93,6 +93,11 @@ SECTIONS
 		__ptov_table_begin = .;
 		*(.ptov_fixup);
 		__ptov_table_end = .;
+#ifdef CONFIG_PPC_ISERIES
+		__dt_strings_start = .;
+		*(.dt_strings);
+		__dt_strings_end = .;
+#endif
 	}
 
 	. = ALIGN(16);

arch/powerpc/lib/Makefile

@@ -2,12 +2,15 @@
 # Makefile for ppc-specific library files..
 #
 
+ifeq ($(CONFIG_PPC64),y)
+EXTRA_CFLAGS		+= -mno-minimal-toc
+endif
+
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y			:= string.o strcase.o
 obj-$(CONFIG_PPC32)	+= div64.o copy_32.o checksum_32.o
 endif
 
-obj-y			+= bitops.o
 obj-$(CONFIG_PPC64)	+= checksum_64.o copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o \
 			   strcase.o

arch/powerpc/lib/bitops.c

@@ -1,150 +0,0 @@
-#include <linux/types.h>
-#include <linux/module.h>
-#include <asm/byteorder.h>
-#include <asm/bitops.h>
-
-/**
- * find_next_bit - find the next set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-unsigned long find_next_bit(const unsigned long *addr, unsigned long size,
-			    unsigned long offset)
-{
-	const unsigned long *p = addr + BITOP_WORD(offset);
-	unsigned long result = offset & ~(BITS_PER_LONG-1);
-	unsigned long tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset %= BITS_PER_LONG;
-	if (offset) {
-		tmp = *(p++);
-		tmp &= (~0UL << offset);
-		if (size < BITS_PER_LONG)
-			goto found_first;
-		if (tmp)
-			goto found_middle;
-		size -= BITS_PER_LONG;
-		result += BITS_PER_LONG;
-	}
-	while (size & ~(BITS_PER_LONG-1)) {
-		if ((tmp = *(p++)))
-			goto found_middle;
-		result += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-	}
-	if (!size)
-		return result;
-	tmp = *p;
-
-found_first:
-	tmp &= (~0UL >> (BITS_PER_LONG - size));
-	if (tmp == 0UL)		/* Are any bits set? */
-		return result + size;	/* Nope. */
-found_middle:
-	return result + __ffs(tmp);
-}
-EXPORT_SYMBOL(find_next_bit);
-
-/*
- * This implementation of find_{first,next}_zero_bit was stolen from
- * Linus' asm-alpha/bitops.h.
- */
-unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size,
-				 unsigned long offset)
-{
-	const unsigned long *p = addr + BITOP_WORD(offset);
-	unsigned long result = offset & ~(BITS_PER_LONG-1);
-	unsigned long tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset %= BITS_PER_LONG;
-	if (offset) {
-		tmp = *(p++);
-		tmp |= ~0UL >> (BITS_PER_LONG - offset);
-		if (size < BITS_PER_LONG)
-			goto found_first;
-		if (~tmp)
-			goto found_middle;
-		size -= BITS_PER_LONG;
-		result += BITS_PER_LONG;
-	}
-	while (size & ~(BITS_PER_LONG-1)) {
-		if (~(tmp = *(p++)))
-			goto found_middle;
-		result += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-	}
-	if (!size)
-		return result;
-	tmp = *p;
-
-found_first:
-	tmp |= ~0UL << size;
-	if (tmp == ~0UL)	/* Are any bits zero? */
-		return result + size;	/* Nope. */
-found_middle:
-	return result + ffz(tmp);
-}
-EXPORT_SYMBOL(find_next_zero_bit);
-
-static inline unsigned int ext2_ilog2(unsigned int x)
-{
-	int lz;
-
-	asm("cntlzw %0,%1": "=r"(lz):"r"(x));
-	return 31 - lz;
-}
-
-static inline unsigned int ext2_ffz(unsigned int x)
-{
-	u32 rc;
-	if ((x = ~x) == 0)
-		return 32;
-	rc = ext2_ilog2(x & -x);
-	return rc;
-}
-
-unsigned long find_next_zero_le_bit(const unsigned long *addr,
-				    unsigned long size, unsigned long offset)
-{
-	const unsigned int *p = ((const unsigned int *)addr) + (offset >> 5);
-	unsigned int result = offset & ~31;
-	unsigned int tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset &= 31;
-	if (offset) {
-		tmp = cpu_to_le32p(p++);
-		tmp |= ~0U >> (32 - offset);	/* bug or feature ? */
-		if (size < 32)
-			goto found_first;
-		if (tmp != ~0)
-			goto found_middle;
-		size -= 32;
-		result += 32;
-	}
-	while (size >= 32) {
-		if ((tmp = cpu_to_le32p(p++)) != ~0)
-			goto found_middle;
-		result += 32;
-		size -= 32;
-	}
-	if (!size)
-		return result;
-	tmp = cpu_to_le32p(p);
-found_first:
-	tmp |= ~0 << size;
-	if (tmp == ~0)		/* Are any bits zero? */
-		return result + size;	/* Nope. */
-found_middle:
-	return result + ext2_ffz(tmp);
-}
-EXPORT_SYMBOL(find_next_zero_le_bit);

arch/powerpc/mm/hash_low_32.S

@@ -74,12 +74,6 @@ _GLOBAL(hash_page_sync)
  */
 	.text
 _GLOBAL(hash_page)
-#ifdef CONFIG_PPC64BRIDGE
-	mfmsr	r0
-	clrldi	r0,r0,1		/* make sure it's in 32-bit mode */
-	MTMSRD(r0)
-	isync
-#endif
 	tophys(r7,0)			/* gets -KERNELBASE into r7 */
 #ifdef CONFIG_SMP
 	addis	r8,r7,mmu_hash_lock@h
@@ -285,7 +279,6 @@ Hash_base = 0xc0180000
 Hash_bits = 12				/* e.g. 256kB hash table */
 Hash_msk = (((1 << Hash_bits) - 1) * 64)
 
-#ifndef CONFIG_PPC64BRIDGE
 /* defines for the PTE format for 32-bit PPCs */
 #define PTE_SIZE	8
 #define PTEG_SIZE	64
@@ -299,21 +292,6 @@ Hash_msk = (((1 << Hash_bits) - 1) * 64)
 #define SET_V(r)	oris r,r,PTE_V@h
 #define CLR_V(r,t)	rlwinm r,r,0,1,31
 
-#else
-/* defines for the PTE format for 64-bit PPCs */
-#define PTE_SIZE	16
-#define PTEG_SIZE	128
-#define LG_PTEG_SIZE	7
-#define LDPTEu		ldu
-#define STPTE		std
-#define CMPPTE		cmpd
-#define PTE_H		2
-#define PTE_V		1
-#define TST_V(r)	andi. r,r,PTE_V
-#define SET_V(r)	ori r,r,PTE_V
-#define CLR_V(r,t)	li t,PTE_V; andc r,r,t
-#endif /* CONFIG_PPC64BRIDGE */
-
 #define HASH_LEFT	31-(LG_PTEG_SIZE+Hash_bits-1)
 #define HASH_RIGHT	31-LG_PTEG_SIZE
 
@@ -331,14 +309,8 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
 
 	/* Construct the high word of the PPC-style PTE (r5) */
-#ifndef CONFIG_PPC64BRIDGE
 	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
 	rlwimi	r5,r4,10,26,31		/* put in API (abbrev page index) */
-#else /* CONFIG_PPC64BRIDGE */
-	clrlwi	r3,r3,8			/* reduce vsid to 24 bits */
-	sldi	r5,r3,12		/* shift vsid into position */
-	rlwimi	r5,r4,16,20,24		/* put in API (abbrev page index) */
-#endif /* CONFIG_PPC64BRIDGE */
 	SET_V(r5)			/* set V (valid) bit */
 
 	/* Get the address of the primary PTE group in the hash table (r3) */
@@ -516,14 +488,8 @@ _GLOBAL(flush_hash_pages)
 	add	r3,r3,r0		/* note code below trims to 24 bits */
 
 	/* Construct the high word of the PPC-style PTE (r11) */
-#ifndef CONFIG_PPC64BRIDGE
 	rlwinm	r11,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
 	rlwimi	r11,r4,10,26,31		/* put in API (abbrev page index) */
-#else /* CONFIG_PPC64BRIDGE */
-	clrlwi	r3,r3,8			/* reduce vsid to 24 bits */
-	sldi	r11,r3,12		/* shift vsid into position */
-	rlwimi	r11,r4,16,20,24		/* put in API (abbrev page index) */
-#endif /* CONFIG_PPC64BRIDGE */
 	SET_V(r11)			/* set V (valid) bit */
 
 #ifdef CONFIG_SMP

arch/powerpc/mm/hash_low_64.S

@@ -136,6 +136,7 @@ _GLOBAL(__hash_page_4K)
 	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
 	andc	r0,r30,r0		/* r0 = pte & ~r0 */
 	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
+	ori	r3,r3,HPTE_R_C		/* Always add "C" bit for perf. */
 
 	/* We eventually do the icache sync here (maybe inline that
 	 * code rather than call a C function...) 
@@ -368,6 +369,7 @@ _GLOBAL(__hash_page_4K)
 	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
 	or	r30,r30,r31
 	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	oris	r30,r30,_PAGE_COMBO@h
 	/* Write the linux PTE atomically (setting busy) */
 	stdcx.	r30,0,r6
 	bne-	1b
@@ -400,6 +402,7 @@ _GLOBAL(__hash_page_4K)
 	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
 	andc	r0,r30,r0		/* r0 = pte & ~r0 */
 	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
+	ori	r3,r3,HPTE_R_C		/* Always add "C" bit for perf. */
 
 	/* We eventually do the icache sync here (maybe inline that
 	 * code rather than call a C function...)
@@ -426,6 +429,14 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	andi.	r0,r31,_PAGE_HASHPTE
 	li	r26,0			/* Default hidx */
 	beq	htab_insert_pte
+
+	/*
+	 * Check if the pte was already inserted into the hash table
+	 * as a 64k HW page, and invalidate the 64k HPTE if so.
+	 */
+	andis.	r0,r31,_PAGE_COMBO@h
+	beq	htab_inval_old_hpte
+
 	ld	r6,STK_PARM(r6)(r1)
 	ori	r26,r6,0x8000		/* Load the hidx mask */
 	ld	r26,0(r26)
@@ -496,6 +507,19 @@ _GLOBAL(htab_call_hpte_remove)
 	/* Try all again */
 	b	htab_insert_pte
 
+	/*
+	 * Call out to C code to invalidate an 64k HW HPTE that is
+	 * useless now that the segment has been switched to 4k pages.
+	 */
+htab_inval_old_hpte:
+	mr	r3,r29			/* virtual addr */
+	mr	r4,r31			/* PTE.pte */
+	li	r5,0			/* PTE.hidx */
+	li	r6,MMU_PAGE_64K		/* psize */
+	ld	r7,STK_PARM(r8)(r1)	/* local */
+	bl	.flush_hash_page
+	b	htab_insert_pte
+	
 htab_bail_ok:
 	li	r3,0
 	b	htab_bail
@@ -636,6 +660,12 @@ _GLOBAL(__hash_page_64K)
 	 * is changing this PTE anyway and might hash it.
 	 */
 	bne-	ht64_bail_ok
+BEGIN_FTR_SECTION
+	/* Check if PTE has the cache-inhibit bit set */
+	andi.	r0,r31,_PAGE_NO_CACHE
+	/* If so, bail out and refault as a 4k page */
+	bne-	ht64_bail_ok
+END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
 	/* Prepare new PTE value (turn access RW into DIRTY, then
 	 * add BUSY,HASHPTE and ACCESSED)
 	 */
@@ -671,6 +701,7 @@ _GLOBAL(__hash_page_64K)
 	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
 	andc	r0,r30,r0		/* r0 = pte & ~r0 */
 	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
+	ori	r3,r3,HPTE_R_C		/* Always add "C" bit for perf. */
 
 	/* We eventually do the icache sync here (maybe inline that
 	 * code rather than call a C function...)

arch/powerpc/mm/hash_native_64.c

@@ -238,7 +238,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
 		DBG_LOW(" -> hit\n");
 		/* Update the HPTE */
 		hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
-			(newpp & (HPTE_R_PP | HPTE_R_N));
+			(newpp & (HPTE_R_PP | HPTE_R_N | HPTE_R_C));
 		native_unlock_hpte(hptep);
 	}
 

arch/powerpc/mm/hash_utils_64.c

@@ -92,10 +92,15 @@ unsigned long htab_size_bytes;
 unsigned long htab_hash_mask;
 int mmu_linear_psize = MMU_PAGE_4K;
 int mmu_virtual_psize = MMU_PAGE_4K;
+int mmu_vmalloc_psize = MMU_PAGE_4K;
+int mmu_io_psize = MMU_PAGE_4K;
 #ifdef CONFIG_HUGETLB_PAGE
 int mmu_huge_psize = MMU_PAGE_16M;
 unsigned int HPAGE_SHIFT;
 #endif
+#ifdef CONFIG_PPC_64K_PAGES
+int mmu_ci_restrictions;
+#endif
 
 /* There are definitions of page sizes arrays to be used when none
  * is provided by the firmware.
@@ -308,20 +313,31 @@ static void __init htab_init_page_sizes(void)
 	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
 		mmu_linear_psize = MMU_PAGE_1M;
 
+#ifdef CONFIG_PPC_64K_PAGES
 	/*
 	 * Pick a size for the ordinary pages. Default is 4K, we support
-	 * 64K if cache inhibited large pages are supported by the
-	 * processor
+	 * 64K for user mappings and vmalloc if supported by the processor.
+	 * We only use 64k for ioremap if the processor
+	 * (and firmware) support cache-inhibited large pages.
+	 * If not, we use 4k and set mmu_ci_restrictions so that
+	 * hash_page knows to switch processes that use cache-inhibited
+	 * mappings to 4k pages.
 	 */
-#ifdef CONFIG_PPC_64K_PAGES
-	if (mmu_psize_defs[MMU_PAGE_64K].shift &&
-	    cpu_has_feature(CPU_FTR_CI_LARGE_PAGE))
+	if (mmu_psize_defs[MMU_PAGE_64K].shift) {
 		mmu_virtual_psize = MMU_PAGE_64K;
+		mmu_vmalloc_psize = MMU_PAGE_64K;
+		if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE))
+			mmu_io_psize = MMU_PAGE_64K;
+		else
+			mmu_ci_restrictions = 1;
+	}
 #endif
 
-	printk(KERN_INFO "Page orders: linear mapping = %d, others = %d\n",
+	printk(KERN_DEBUG "Page orders: linear mapping = %d, "
+	       "virtual = %d, io = %d\n",
 	       mmu_psize_defs[mmu_linear_psize].shift,
-	       mmu_psize_defs[mmu_virtual_psize].shift);
+	       mmu_psize_defs[mmu_virtual_psize].shift,
+	       mmu_psize_defs[mmu_io_psize].shift);
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* Init large page size. Currently, we pick 16M or 1M depending
@@ -556,6 +572,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	pte_t *ptep;
 	cpumask_t tmp;
 	int rc, user_region = 0, local = 0;
+	int psize;
 
 	DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
 		ea, access, trap);
@@ -575,10 +592,15 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 			return 1;
 		}
 		vsid = get_vsid(mm->context.id, ea);
+		psize = mm->context.user_psize;
 		break;
 	case VMALLOC_REGION_ID:
 		mm = &init_mm;
 		vsid = get_kernel_vsid(ea);
+		if (ea < VMALLOC_END)
+			psize = mmu_vmalloc_psize;
+		else
+			psize = mmu_io_psize;
 		break;
 	default:
 		/* Not a valid range
@@ -629,7 +651,40 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 #ifndef CONFIG_PPC_64K_PAGES
 	rc = __hash_page_4K(ea, access, vsid, ptep, trap, local);
 #else
-	if (mmu_virtual_psize == MMU_PAGE_64K)
+	if (mmu_ci_restrictions) {
+		/* If this PTE is non-cacheable, switch to 4k */
+		if (psize == MMU_PAGE_64K &&
+		    (pte_val(*ptep) & _PAGE_NO_CACHE)) {
+			if (user_region) {
+				psize = MMU_PAGE_4K;
+				mm->context.user_psize = MMU_PAGE_4K;
+				mm->context.sllp = SLB_VSID_USER |
+					mmu_psize_defs[MMU_PAGE_4K].sllp;
+			} else if (ea < VMALLOC_END) {
+				/*
+				 * some driver did a non-cacheable mapping
+				 * in vmalloc space, so switch vmalloc
+				 * to 4k pages
+				 */
+				printk(KERN_ALERT "Reducing vmalloc segment "
+				       "to 4kB pages because of "
+				       "non-cacheable mapping\n");
+				psize = mmu_vmalloc_psize = MMU_PAGE_4K;
+			}
+		}
+		if (user_region) {
+			if (psize != get_paca()->context.user_psize) {
+				get_paca()->context = mm->context;
+				slb_flush_and_rebolt();
+			}
+		} else if (get_paca()->vmalloc_sllp !=
+			   mmu_psize_defs[mmu_vmalloc_psize].sllp) {
+			get_paca()->vmalloc_sllp =
+				mmu_psize_defs[mmu_vmalloc_psize].sllp;
+			slb_flush_and_rebolt();
+		}
+	}
+	if (psize == MMU_PAGE_64K)
 		rc = __hash_page_64K(ea, access, vsid, ptep, trap, local);
 	else
 		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local);
@@ -681,7 +736,18 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 #ifndef CONFIG_PPC_64K_PAGES
 	__hash_page_4K(ea, access, vsid, ptep, trap, local);
 #else
-	if (mmu_virtual_psize == MMU_PAGE_64K)
+	if (mmu_ci_restrictions) {
+		/* If this PTE is non-cacheable, switch to 4k */
+		if (mm->context.user_psize == MMU_PAGE_64K &&
+		    (pte_val(*ptep) & _PAGE_NO_CACHE)) {
+			mm->context.user_psize = MMU_PAGE_4K;
+			mm->context.sllp = SLB_VSID_USER |
+				mmu_psize_defs[MMU_PAGE_4K].sllp;
+			get_paca()->context = mm->context;
+			slb_flush_and_rebolt();
+		}
+	}
+	if (mm->context.user_psize == MMU_PAGE_64K)
 		__hash_page_64K(ea, access, vsid, ptep, trap, local);
 	else
 		__hash_page_4K(ea, access, vsid, ptep, trap, local);

arch/powerpc/mm/lmb.c

@@ -89,20 +89,25 @@ static long __init lmb_regions_adjacent(struct lmb_region *rgn,
 	return lmb_addrs_adjacent(base1, size1, base2, size2);
 }
 
-/* Assumption: base addr of region 1 < base addr of region 2 */
-static void __init lmb_coalesce_regions(struct lmb_region *rgn,
-		unsigned long r1, unsigned long r2)
+static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
 {
 	unsigned long i;
 
-	rgn->region[r1].size += rgn->region[r2].size;
-	for (i=r2; i < rgn->cnt-1; i++) {
-		rgn->region[i].base = rgn->region[i+1].base;
-		rgn->region[i].size = rgn->region[i+1].size;
+	for (i = r; i < rgn->cnt - 1; i++) {
+		rgn->region[i].base = rgn->region[i + 1].base;
+		rgn->region[i].size = rgn->region[i + 1].size;
 	}
 	rgn->cnt--;
 }
 
+/* Assumption: base addr of region 1 < base addr of region 2 */
+static void __init lmb_coalesce_regions(struct lmb_region *rgn,
+		unsigned long r1, unsigned long r2)
+{
+	rgn->region[r1].size += rgn->region[r2].size;
+	lmb_remove_region(rgn, r2);
+}
+
 /* This routine called with relocation disabled. */
 void __init lmb_init(void)
 {
@@ -294,17 +299,16 @@ unsigned long __init lmb_end_of_DRAM(void)
 	return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
 }
 
-/*
- * Truncate the lmb list to memory_limit if it's set
- * You must call lmb_analyze() after this.
- */
+/* You must call lmb_analyze() after this. */
 void __init lmb_enforce_memory_limit(unsigned long memory_limit)
 {
 	unsigned long i, limit;
+	struct lmb_property *p;
 
 	if (! memory_limit)
 		return;
 
+	/* Truncate the lmb regions to satisfy the memory limit. */
 	limit = memory_limit;
 	for (i = 0; i < lmb.memory.cnt; i++) {
 		if (limit > lmb.memory.region[i].size) {
@@ -316,4 +320,21 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit)
 		lmb.memory.cnt = i + 1;
 		break;
 	}
+
+	lmb.rmo_size = lmb.memory.region[0].size;
+
+	/* And truncate any reserves above the limit also. */
+	for (i = 0; i < lmb.reserved.cnt; i++) {
+		p = &lmb.reserved.region[i];
+
+		if (p->base > memory_limit)
+			p->size = 0;
+		else if ((p->base + p->size) > memory_limit)
+			p->size = memory_limit - p->base;
+
+		if (p->size == 0) {
+			lmb_remove_region(&lmb.reserved, i);
+			i--;
+		}
+	}
 }

arch/powerpc/mm/mem.c

@@ -299,9 +299,9 @@ void __init paging_init(void)
 	kmap_prot = PAGE_KERNEL;
 #endif /* CONFIG_HIGHMEM */
 
-	printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
+	printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
 	       top_of_ram, total_ram);
-	printk(KERN_INFO "Memory hole size: %ldMB\n",
+	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (top_of_ram - total_ram) >> 20);
 	/*
 	 * All pages are DMA-able so we put them all in the DMA zone.
@@ -380,7 +380,7 @@ void __init mem_init(void)
 			totalhigh_pages++;
 		}
 		totalram_pages += totalhigh_pages;
-		printk(KERN_INFO "High memory: %luk\n",
+		printk(KERN_DEBUG "High memory: %luk\n",
 		       totalhigh_pages << (PAGE_SHIFT-10));
 	}
 #endif /* CONFIG_HIGHMEM */

arch/powerpc/mm/mmu_context_32.c

@@ -30,7 +30,7 @@
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
-mm_context_t next_mmu_context;
+unsigned long next_mmu_context;
 unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
 #ifdef FEW_CONTEXTS
 atomic_t nr_free_contexts;

arch/powerpc/mm/mmu_context_64.c

@@ -49,6 +49,9 @@ again:
 	}
 
 	mm->context.id = index;
+	mm->context.user_psize = mmu_virtual_psize;
+	mm->context.sllp = SLB_VSID_USER |
+		mmu_psize_defs[mmu_virtual_psize].sllp;
 
 	return 0;
 }

arch/powerpc/mm/numa.c

@@ -487,9 +487,9 @@ static void __init setup_nonnuma(void)
 	unsigned long total_ram = lmb_phys_mem_size();
 	unsigned int i;
 
-	printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
+	printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
 	       top_of_ram, total_ram);
-	printk(KERN_INFO "Memory hole size: %ldMB\n",
+	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (top_of_ram - total_ram) >> 20);
 
 	for (i = 0; i < lmb.memory.cnt; ++i)
@@ -507,7 +507,7 @@ void __init dump_numa_cpu_topology(void)
 		return;
 
 	for_each_online_node(node) {
-		printk(KERN_INFO "Node %d CPUs:", node);
+		printk(KERN_DEBUG "Node %d CPUs:", node);
 
 		count = 0;
 		/*
@@ -543,7 +543,7 @@ static void __init dump_numa_memory_topology(void)
 	for_each_online_node(node) {
 		unsigned long i;
 
-		printk(KERN_INFO "Node %d Memory:", node);
+		printk(KERN_DEBUG "Node %d Memory:", node);
 
 		count = 0;
 

arch/powerpc/mm/ppc_mmu_32.c

@@ -42,18 +42,14 @@ unsigned long _SDR1;
 
 union ubat {			/* BAT register values to be loaded */
 	BAT	bat;
-#ifdef CONFIG_PPC64BRIDGE
-	u64	word[2];
-#else
 	u32	word[2];
-#endif
-} BATS[4][2];			/* 4 pairs of IBAT, DBAT */
+} BATS[8][2];			/* 8 pairs of IBAT, DBAT */
 
 struct batrange {		/* stores address ranges mapped by BATs */
 	unsigned long start;
 	unsigned long limit;
 	unsigned long phys;
-} bat_addrs[4];
+} bat_addrs[8];
 
 /*
  * Return PA for this VA if it is mapped by a BAT, or 0
@@ -190,7 +186,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 		return;
 	pmd = pmd_offset(pgd_offset(mm, ea), ea);
 	if (!pmd_none(*pmd))
-		add_hash_page(mm->context, ea, pmd_val(*pmd));
+		add_hash_page(mm->context.id, ea, pmd_val(*pmd));
 }
 
 /*
@@ -220,15 +216,9 @@ void __init MMU_init_hw(void)
 
 	if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
 
-#ifdef CONFIG_PPC64BRIDGE
-#define LG_HPTEG_SIZE	7		/* 128 bytes per HPTEG */
-#define SDR1_LOW_BITS	(lg_n_hpteg - 11)
-#define MIN_N_HPTEG	2048		/* min 256kB hash table */
-#else
 #define LG_HPTEG_SIZE	6		/* 64 bytes per HPTEG */
 #define SDR1_LOW_BITS	((n_hpteg - 1) >> 10)
 #define MIN_N_HPTEG	1024		/* min 64kB hash table */
-#endif
 
 	/*
 	 * Allow 1 HPTE (1/8 HPTEG) for each page of memory.

arch/powerpc/mm/slb.c

@@ -60,19 +60,19 @@ static inline void create_slbe(unsigned long ea, unsigned long flags,
 		     : "memory" );
 }
 
-static void slb_flush_and_rebolt(void)
+void slb_flush_and_rebolt(void)
 {
 	/* If you change this make sure you change SLB_NUM_BOLTED
 	 * appropriately too. */
-	unsigned long linear_llp, virtual_llp, lflags, vflags;
+	unsigned long linear_llp, vmalloc_llp, lflags, vflags;
 	unsigned long ksp_esid_data;
 
 	WARN_ON(!irqs_disabled());
 
 	linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
-	virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+	vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
 	lflags = SLB_VSID_KERNEL | linear_llp;
-	vflags = SLB_VSID_KERNEL | virtual_llp;
+	vflags = SLB_VSID_KERNEL | vmalloc_llp;
 
 	ksp_esid_data = mk_esid_data(get_paca()->kstack, 2);
 	if ((ksp_esid_data & ESID_MASK) == PAGE_OFFSET)
@@ -122,9 +122,6 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 
 	get_paca()->slb_cache_ptr = 0;
 	get_paca()->context = mm->context;
-#ifdef CONFIG_PPC_64K_PAGES
-	get_paca()->pgdir = mm->pgd;
-#endif /* CONFIG_PPC_64K_PAGES */
 
 	/*
 	 * preload some userspace segments into the SLB.
@@ -167,11 +164,10 @@ static inline void patch_slb_encoding(unsigned int *insn_addr,
 
 void slb_initialize(void)
 {
-	unsigned long linear_llp, virtual_llp;
+	unsigned long linear_llp, vmalloc_llp, io_llp;
 	static int slb_encoding_inited;
 	extern unsigned int *slb_miss_kernel_load_linear;
-	extern unsigned int *slb_miss_kernel_load_virtual;
-	extern unsigned int *slb_miss_user_load_normal;
+	extern unsigned int *slb_miss_kernel_load_io;
 #ifdef CONFIG_HUGETLB_PAGE
 	extern unsigned int *slb_miss_user_load_huge;
 	unsigned long huge_llp;
@@ -181,18 +177,19 @@ void slb_initialize(void)
 
 	/* Prepare our SLB miss handler based on our page size */
 	linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
-	virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+	io_llp = mmu_psize_defs[mmu_io_psize].sllp;
+	vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
+	get_paca()->vmalloc_sllp = SLB_VSID_KERNEL | vmalloc_llp;
+
 	if (!slb_encoding_inited) {
 		slb_encoding_inited = 1;
 		patch_slb_encoding(slb_miss_kernel_load_linear,
 				   SLB_VSID_KERNEL | linear_llp);
-		patch_slb_encoding(slb_miss_kernel_load_virtual,
-				   SLB_VSID_KERNEL | virtual_llp);
-		patch_slb_encoding(slb_miss_user_load_normal,
-				   SLB_VSID_USER | virtual_llp);
+		patch_slb_encoding(slb_miss_kernel_load_io,
+				   SLB_VSID_KERNEL | io_llp);
 
 		DBG("SLB: linear  LLP = %04x\n", linear_llp);
-		DBG("SLB: virtual LLP = %04x\n", virtual_llp);
+		DBG("SLB: io      LLP = %04x\n", io_llp);
 #ifdef CONFIG_HUGETLB_PAGE
 		patch_slb_encoding(slb_miss_user_load_huge,
 				   SLB_VSID_USER | huge_llp);
@@ -207,7 +204,7 @@ void slb_initialize(void)
 	unsigned long lflags, vflags;
 
 	lflags = SLB_VSID_KERNEL | linear_llp;
-	vflags = SLB_VSID_KERNEL | virtual_llp;
+	vflags = SLB_VSID_KERNEL | vmalloc_llp;
 
 	/* Invalidate the entire SLB (even slot 0) & all the ERATS */
 	asm volatile("isync":::"memory");
@@ -215,7 +212,6 @@ void slb_initialize(void)
 	asm volatile("isync; slbia; isync":::"memory");
 	create_slbe(PAGE_OFFSET, lflags, 0);
 
-	/* VMALLOC space has 4K pages always for now */
 	create_slbe(VMALLOC_START, vflags, 1);
 
 	/* We don't bolt the stack for the time being - we're in boot,

arch/powerpc/mm/slb_low.S

@@ -59,10 +59,19 @@ _GLOBAL(slb_miss_kernel_load_linear)
 	li	r11,0
 	b	slb_finish_load
 
-1:	/* vmalloc/ioremap mapping encoding bits, the "li" instruction below
+1:	/* vmalloc/ioremap mapping encoding bits, the "li" instructions below
 	 * will be patched by the kernel at boot
 	 */
-_GLOBAL(slb_miss_kernel_load_virtual)
+BEGIN_FTR_SECTION
+	/* check whether this is in vmalloc or ioremap space */
+	clrldi	r11,r10,48
+	cmpldi	r11,(VMALLOC_SIZE >> 28) - 1
+	bgt	5f
+	lhz	r11,PACAVMALLOCSLLP(r13)
+	b	slb_finish_load
+5:
+END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
+_GLOBAL(slb_miss_kernel_load_io)
 	li	r11,0
 	b	slb_finish_load
 
@@ -96,9 +105,7 @@ _GLOBAL(slb_miss_user_load_huge)
 1:
 #endif /* CONFIG_HUGETLB_PAGE */
 
-_GLOBAL(slb_miss_user_load_normal)
-	li	r11,0
-
+	lhz	r11,PACACONTEXTSLLP(r13)
 2:
 	ld	r9,PACACONTEXTID(r13)
 	rldimi	r10,r9,USER_ESID_BITS,0

arch/powerpc/mm/stab.c

@@ -200,10 +200,6 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
 
 	__get_cpu_var(stab_cache_ptr) = 0;
 
-#ifdef CONFIG_PPC_64K_PAGES
-	get_paca()->pgdir = mm->pgd;
-#endif /* CONFIG_PPC_64K_PAGES */
-
 	/* Now preload some entries for the new task */
 	if (test_tsk_thread_flag(tsk, TIF_32BIT))
 		unmapped_base = TASK_UNMAPPED_BASE_USER32;

arch/powerpc/mm/tlb_32.c

@@ -42,7 +42,7 @@ void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
 
 	if (Hash != 0) {
 		ptephys = __pa(ptep) & PAGE_MASK;
-		flush_hash_pages(mm->context, addr, ptephys, 1);
+		flush_hash_pages(mm->context.id, addr, ptephys, 1);
 	}
 }
 
@@ -102,7 +102,7 @@ static void flush_range(struct mm_struct *mm, unsigned long start,
 	pmd_t *pmd;
 	unsigned long pmd_end;
 	int count;
-	unsigned int ctx = mm->context;
+	unsigned int ctx = mm->context.id;
 
 	if (Hash == 0) {
 		_tlbia();
@@ -172,7 +172,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 	mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
 	pmd = pmd_offset(pgd_offset(mm, vmaddr), vmaddr);
 	if (!pmd_none(*pmd))
-		flush_hash_pages(mm->context, vmaddr, pmd_val(*pmd), 1);
+		flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1);
 	FINISH_FLUSH;
 }
 

arch/powerpc/mm/tlb_64.c

@@ -131,7 +131,7 @@ void hpte_update(struct mm_struct *mm, unsigned long addr,
 {
 	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
 	unsigned long vsid;
-	unsigned int psize = mmu_virtual_psize;
+	unsigned int psize;
 	int i;
 
 	i = batch->index;
@@ -148,7 +148,8 @@ void hpte_update(struct mm_struct *mm, unsigned long addr,
 #else
 		BUG();
 #endif
-	}
+	} else
+		psize = pte_pagesize_index(pte);
 
 	/*
 	 * This can happen when we are in the middle of a TLB batch and

arch/powerpc/oprofile/Kconfig

@@ -1,5 +1,4 @@
 config PROFILING
-	depends on !PPC_ISERIES
 	bool "Profiling support (EXPERIMENTAL)"
 	help
 	  Say Y here to enable the extended profiling support mechanisms used

arch/powerpc/oprofile/Makefile

@@ -1,3 +1,7 @@
+ifeq ($(CONFIG_PPC64),y)
+EXTRA_CFLAGS	+= -mno-minimal-toc
+endif
+
 obj-$(CONFIG_OPROFILE) += oprofile.o
 
 DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \

arch/powerpc/oprofile/common.c

@@ -22,6 +22,7 @@
 #include <asm/pmc.h>
 #include <asm/cputable.h>
 #include <asm/oprofile_impl.h>
+#include <asm/firmware.h>
 
 static struct op_powerpc_model *model;
 
@@ -130,6 +131,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	if (!cur_cpu_spec->oprofile_cpu_type)
 		return -ENODEV;
 
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		return -ENODEV;
+
 	switch (cur_cpu_spec->oprofile_type) {
 #ifdef CONFIG_PPC64
 		case PPC_OPROFILE_RS64:
@@ -162,7 +166,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	ops->stop = op_powerpc_stop;
 	ops->backtrace = op_powerpc_backtrace;
 
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+	printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n",
 	       ops->cpu_type);
 
 	return 0;

arch/powerpc/oprofile/op_model_power4.c

@@ -24,10 +24,6 @@
 static unsigned long reset_value[OP_MAX_COUNTER];
 
 static int oprofile_running;
-static int mmcra_has_sihv;
-/* Unfortunately these bits vary between CPUs */
-static unsigned long mmcra_sihv = MMCRA_SIHV;
-static unsigned long mmcra_sipr = MMCRA_SIPR;
 
 /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
 static u32 mmcr0_val;
@@ -40,16 +36,6 @@ static void power4_reg_setup(struct op_counter_config *ctr,
 {
 	int i;
 
-	/*
-	 * SIHV / SIPR bits are only implemented on POWER4+ (GQ) and above.
-	 * However we disable it on all POWER4 until we verify it works
-	 * (I was seeing some strange behaviour last time I tried).
-	 *
-	 * It has been verified to work on POWER5 so we enable it there.
-	 */
-	if (cpu_has_feature(CPU_FTR_MMCRA_SIHV))
-		mmcra_has_sihv = 1;
-
 	/*
 	 * The performance counter event settings are given in the mmcr0,
 	 * mmcr1 and mmcra values passed from the user in the
@@ -202,18 +188,19 @@ static unsigned long get_pc(struct pt_regs *regs)
 	unsigned long mmcra;
 
 	/* Cant do much about it */
-	if (!mmcra_has_sihv)
+	if (!cur_cpu_spec->oprofile_mmcra_sihv)
 		return pc;
 
 	mmcra = mfspr(SPRN_MMCRA);
 
 	/* Were we in the hypervisor? */
-	if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & mmcra_sihv))
+	if (firmware_has_feature(FW_FEATURE_LPAR) &&
+	    (mmcra & cur_cpu_spec->oprofile_mmcra_sihv))
 		/* function descriptor madness */
 		return *((unsigned long *)hypervisor_bucket);
 
 	/* We were in userspace, nothing to do */
-	if (mmcra & mmcra_sipr)
+	if (mmcra & cur_cpu_spec->oprofile_mmcra_sipr)
 		return pc;
 
 #ifdef CONFIG_PPC_RTAS
@@ -235,15 +222,14 @@ static unsigned long get_pc(struct pt_regs *regs)
 	return pc;
 }
 
-static int get_kernel(unsigned long pc)
+static int get_kernel(unsigned long pc, unsigned long mmcra)
 {
 	int is_kernel;
 
-	if (!mmcra_has_sihv) {
+	if (!cur_cpu_spec->oprofile_mmcra_sihv) {
 		is_kernel = is_kernel_addr(pc);
 	} else {
-		unsigned long mmcra = mfspr(SPRN_MMCRA);
-		is_kernel = ((mmcra & mmcra_sipr) == 0);
+		is_kernel = ((mmcra & cur_cpu_spec->oprofile_mmcra_sipr) == 0);
 	}
 
 	return is_kernel;
@@ -257,9 +243,12 @@ static void power4_handle_interrupt(struct pt_regs *regs,
 	int val;
 	int i;
 	unsigned int mmcr0;
+	unsigned long mmcra;
+
+	mmcra = mfspr(SPRN_MMCRA);
 
 	pc = get_pc(regs);
-	is_kernel = get_kernel(pc);
+	is_kernel = get_kernel(pc, mmcra);
 
 	/* set the PMM bit (see comment below) */
 	mtmsrd(mfmsr() | MSR_PMM);
@@ -287,6 +276,10 @@ static void power4_handle_interrupt(struct pt_regs *regs,
 	 */
 	mmcr0 &= ~MMCR0_PMAO;
 
+	/* Clear the appropriate bits in the MMCRA */
+	mmcra &= ~cur_cpu_spec->oprofile_mmcra_clear;
+	mtspr(SPRN_MMCRA, mmcra);
+
 	/*
 	 * now clear the freeze bit, counting will not start until we
 	 * rfid from this exception, because only at that point will

arch/powerpc/platforms/85xx/Kconfig

@@ -11,13 +11,20 @@ config MPC8540_ADS
 	help
 	  This option enables support for the MPC 8540 ADS board
 
+config MPC85xx_CDS
+	bool "Freescale MPC85xx CDS"
+	select DEFAULT_UIMAGE
+	select PPC_I8259 if PCI
+	help
+	  This option enables support for the MPC85xx CDS board
+
 endchoice
 
 config MPC8540
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
-	default y if MPC8540_ADS
+	default y if MPC8540_ADS || MPC85xx_CDS
 
 config PPC_INDIRECT_PCI_BE
 	bool

arch/powerpc/platforms/85xx/Makefile

@@ -3,3 +3,4 @@
 #
 obj-$(CONFIG_PPC_85xx)	+= misc.o pci.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o

arch/powerpc/platforms/85xx/mpc85xx_cds.c

@@ -0,0 +1,359 @@
+/*
+ * MPC85xx setup and early boot code plus other random bits.
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#include <sysdev/fsl_soc.h>
+#include "mpc85xx.h"
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+static int cds_pci_slot = 2;
+static volatile u8 *cadmus;
+
+/*
+ * Internal interrupts are all Level Sensitive, and Positive Polarity
+ *
+ * Note:  Likely, this table and the following function should be
+ *        obtained and derived from the OF Device Tree.
+ */
+static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
+	MPC85XX_INTERNAL_IRQ_SENSES,
+#if defined(CONFIG_PCI)
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Ext 0: PCI slot 0 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 1: PCI slot 1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 2: PCI slot 2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 3: PCI slot 3 */
+#else
+	0x0,				/* External  0: */
+	0x0,				/* External  1: */
+	0x0,				/* External  2: */
+	0x0,				/* External  3: */
+#endif
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 5: PHY */
+	0x0,				/* External  6: */
+	0x0,				/* External  7: */
+	0x0,				/* External  8: */
+	0x0,				/* External  9: */
+	0x0,				/* External 10: */
+#ifdef CONFIG_PCI
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),    /* Ext 11: PCI2 slot 0 */
+#else
+	0x0,				/* External 11: */
+#endif
+};
+
+
+#ifdef CONFIG_PCI
+/*
+ * interrupt routing
+ */
+int
+mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+	if (!hose->index)
+	{
+		/* Handle PCI1 interrupts */
+		char pci_irq_table[][4] =
+			/*
+			 *      PCI IDSEL/INTPIN->INTLINE
+			 *        A      B      C      D
+			 */
+
+			/* Note IRQ assignment for slots is based on which slot the elysium is
+			 * in -- in this setup elysium is in slot #2 (this PIRQA as first
+			 * interrupt on slot */
+		{
+			{ 0, 1, 2, 3 }, /* 16 - PMC */
+			{ 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
+			{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
+			{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
+			{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
+			{ 3, 0, 1, 2 }, /* 21 - Slot 4 */
+		};
+
+		const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
+		int i, j;
+
+		for (i = 0; i < 6; i++)
+			for (j = 0; j < 4; j++)
+				pci_irq_table[i][j] =
+					((pci_irq_table[i][j] + 5 -
+					  cds_pci_slot) & 0x3) + PIRQ0A;
+
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else {
+		/* Handle PCI2 interrupts (if we have one) */
+		char pci_irq_table[][4] =
+		{
+			/*
+			 * We only have one slot and one interrupt
+			 * going to PIRQA - PIRQD */
+			{ PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
+		};
+
+		const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
+
+		return PCI_IRQ_TABLE_LOOKUP;
+	}
+}
+
+#define ARCADIA_HOST_BRIDGE_IDSEL	17
+#define ARCADIA_2ND_BRIDGE_IDSEL	3
+
+extern int mpc85xx_pci2_busno;
+
+int
+mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+	if (bus == 0 && PCI_SLOT(devfn) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if (mpc85xx_pci2_busno)
+		if (bus == (mpc85xx_pci2_busno) && PCI_SLOT(devfn) == 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	/* We explicitly do not go past the Tundra 320 Bridge */
+	if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	else
+		return PCIBIOS_SUCCESSFUL;
+}
+
+void __init
+mpc85xx_cds_pcibios_fixup(void)
+{
+	struct pci_dev *dev;
+	u_char		c;
+
+	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
+					PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
+		/*
+		 * U-Boot does not set the enable bits
+		 * for the IDE device. Force them on here.
+		 */
+		pci_read_config_byte(dev, 0x40, &c);
+		c |= 0x03; /* IDE: Chip Enable Bits */
+		pci_write_config_byte(dev, 0x40, c);
+
+		/*
+		 * Since only primary interface works, force the
+		 * IDE function to standard primary IDE interrupt
+		 * w/ 8259 offset
+		 */
+		dev->irq = 14;
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+		pci_dev_put(dev);
+	}
+
+	/*
+	 * Force legacy USB interrupt routing
+	 */
+	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
+					PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
+		dev->irq = 10;
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
+		pci_dev_put(dev);
+	}
+
+	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
+					PCI_DEVICE_ID_VIA_82C586_2, dev))) {
+		dev->irq = 11;
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+		pci_dev_put(dev);
+	}
+}
+#endif /* CONFIG_PCI */
+
+void __init mpc85xx_cds_pic_init(void)
+{
+	struct mpic *mpic1;
+	phys_addr_t OpenPIC_PAddr;
+
+	/* Determine the Physical Address of the OpenPIC regs */
+	OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
+
+	mpic1 = mpic_alloc(OpenPIC_PAddr,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
+			mpc85xx_cds_openpic_initsenses,
+			sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC  ");
+	BUG_ON(mpic1 == NULL);
+	mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
+	mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
+	mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
+	mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
+	mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
+	mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
+	mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
+	mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
+
+	/* dummy mappings to get to 48 */
+	mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
+	mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
+	mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
+	mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
+
+	/* External ints */
+	mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
+	mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
+	mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
+
+	mpic_init(mpic1);
+
+#ifdef CONFIG_PCI
+	mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL);
+
+	i8259_init(0,0);
+#endif
+}
+
+
+/*
+ * Setup the architecture
+ */
+static void __init
+mpc85xx_cds_setup_arch(void)
+{
+	struct device_node *cpu;
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
+
+	cpu = of_find_node_by_type(NULL, "cpu");
+	if (cpu != 0) {
+		unsigned int *fp;
+
+		fp = (int *)get_property(cpu, "clock-frequency", NULL);
+		if (fp != 0)
+			loops_per_jiffy = *fp / HZ;
+		else
+			loops_per_jiffy = 500000000 / HZ;
+		of_node_put(cpu);
+	}
+
+	cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
+	cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
+
+	if (ppc_md.progress) {
+		char buf[40];
+		snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
+				cadmus[CM_VER], cds_pci_slot);
+		ppc_md.progress(buf, 0);
+	}
+
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+		add_bridge(np);
+
+	ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = mpc85xx_map_irq;
+	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+#endif
+
+#ifdef  CONFIG_ROOT_NFS
+	ROOT_DEV = Root_NFS;
+#else
+	ROOT_DEV = Root_HDA1;
+#endif
+}
+
+
+void
+mpc85xx_cds_show_cpuinfo(struct seq_file *m)
+{
+	uint pvid, svid, phid1;
+	uint memsize = total_memory;
+
+	pvid = mfspr(SPRN_PVR);
+	svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+	seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]);
+	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	/* Display cpu Pll setting */
+	phid1 = mfspr(SPRN_HID1);
+	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+	/* Display the amount of memory */
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc85xx_cds_probe(void)
+{
+	/* We always match for now, eventually we should look at
+	 * the flat dev tree to ensure this is the board we are
+	 * supposed to run on
+	 */
+	return 1;
+}
+
+define_machine(mpc85xx_cds) {
+	.name		= "MPC85xx CDS",
+	.probe		= mpc85xx_cds_probe,
+	.setup_arch	= mpc85xx_cds_setup_arch,
+	.init_IRQ	= mpc85xx_cds_pic_init,
+	.show_cpuinfo	= mpc85xx_cds_show_cpuinfo,
+	.get_irq	= mpic_get_irq,
+	.restart	= mpc85xx_restart,
+	.calibrate_decr = generic_calibrate_decr,
+	.progress	= udbg_progress,
+};

arch/powerpc/platforms/85xx/mpc85xx_cds.h

@@ -0,0 +1,43 @@
+/*
+ * arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+ *
+ * MPC85xx CDS board definitions
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC85XX_CDS_H__
+#define __MACH_MPC85XX_CDS_H__
+
+/* CADMUS info */
+#define CADMUS_BASE (0xf8004000)
+#define CADMUS_SIZE (256)
+#define CM_VER	(0)
+#define CM_CSR	(1)
+#define CM_RST	(2)
+
+/* CDS NVRAM/RTC */
+#define CDS_RTC_ADDR	(0xf8000000)
+#define CDS_RTC_SIZE	(8 * 1024)
+
+/* PCI interrupt controller */
+#define PIRQ0A			MPC85xx_IRQ_EXT0
+#define PIRQ0B			MPC85xx_IRQ_EXT1
+#define PIRQ0C			MPC85xx_IRQ_EXT2
+#define PIRQ0D			MPC85xx_IRQ_EXT3
+#define PIRQ1A			MPC85xx_IRQ_EXT11
+
+#define NR_8259_INTS		16
+#define CPM_IRQ_OFFSET		NR_8259_INTS
+
+#define MPC85xx_OPENPIC_IRQ_OFFSET	80
+
+#endif /* __MACH_MPC85XX_CDS_H__ */

arch/powerpc/platforms/86xx/Kconfig

@@ -0,0 +1,36 @@
+menu "Platform Support"
+	depends on PPC_86xx
+
+choice
+	prompt "Machine Type"
+	default MPC8641_HPCN
+
+config MPC8641_HPCN
+	bool "Freescale MPC8641 HPCN"
+	help
+	  This option enables support for the MPC8641 HPCN board.
+
+endchoice
+
+
+config MPC8641
+	bool
+	select PPC_INDIRECT_PCI
+	select PPC_UDBG_16550
+	default y if MPC8641_HPCN
+
+config MPIC
+	bool
+	default y
+
+config PPC_INDIRECT_PCI_BE
+	bool
+	depends on PPC_86xx
+	default y
+
+config PPC_STD_MMU
+	bool
+	depends on PPC_86xx
+	default y
+
+endmenu

arch/powerpc/platforms/86xx/Makefile

@@ -0,0 +1,10 @@
+#
+# Makefile for the PowerPC 86xx linux kernel.
+#
+
+
+ifeq ($(CONFIG_PPC_86xx),y)
+obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
+endif
+obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
+obj-$(CONFIG_PCI)		+= pci.o mpc86xx_pcie.o

arch/powerpc/platforms/86xx/mpc8641_hpcn.h

@@ -0,0 +1,54 @@
+/*
+ * MPC8641 HPCN board definitions
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Author: Xianghua Xiao <x.xiao@freescale.com>
+ */
+
+#ifndef __MPC8641_HPCN_H__
+#define __MPC8641_HPCN_H__
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+/* PCI interrupt controller */
+#define PIRQA		3
+#define PIRQB		4
+#define PIRQC		5
+#define PIRQD		6
+#define PIRQ7		7
+#define PIRQE		9
+#define PIRQF		10
+#define PIRQG		11
+#define PIRQH		12
+
+/* PCI-Express memory map */
+#define MPC86XX_PCIE_LOWER_IO        0x00000000
+#define MPC86XX_PCIE_UPPER_IO        0x00ffffff
+
+#define MPC86XX_PCIE_LOWER_MEM       0x80000000
+#define MPC86XX_PCIE_UPPER_MEM       0x9fffffff
+
+#define MPC86XX_PCIE_IO_BASE         0xe2000000
+#define MPC86XX_PCIE_MEM_OFFSET      0x00000000
+
+#define MPC86XX_PCIE_IO_SIZE         0x01000000
+
+#define PCIE1_CFG_ADDR_OFFSET    (0x8000)
+#define PCIE1_CFG_DATA_OFFSET    (0x8004)
+
+#define PCIE2_CFG_ADDR_OFFSET    (0x9000)
+#define PCIE2_CFG_DATA_OFFSET    (0x9004)
+
+#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET
+#define MPC86xx_PCIE_SIZE	(0x1000)
+
+#define MPC86XX_RSTCR_OFFSET	(0xe00b0)	/* Reset Control Register */
+
+#endif	/* __MPC8641_HPCN_H__ */

arch/powerpc/platforms/86xx/mpc86xx.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MPC86XX_H__
+#define __MPC86XX_H__
+
+/*
+ * Declaration for the various functions exported by the
+ * mpc86xx_* files. Mostly for use by mpc86xx_setup().
+ */
+
+extern int __init add_bridge(struct device_node *dev);
+
+extern void __init setup_indirect_pcie(struct pci_controller *hose,
+				       u32 cfg_addr, u32 cfg_data);
+extern void __init setup_indirect_pcie_nomap(struct pci_controller *hose,
+					     void __iomem *cfg_addr,
+					     void __iomem *cfg_data);
+
+extern void __init mpc86xx_smp_init(void);
+
+#endif	/* __MPC86XX_H__ */

arch/powerpc/platforms/86xx/mpc86xx_hpcn.c

@@ -0,0 +1,326 @@
+/*
+ * MPC86xx HPCN board specific routines
+ *
+ * Recode: ZHANG WEI <wei.zhang@freescale.com>
+ * Initial author: Xianghua Xiao <x.xiao@freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/i8259.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+unsigned long pci_dram_offset = 0;
+#endif
+
+
+/*
+ * Internal interrupts are all Level Sensitive, and Positive Polarity
+ */
+
+static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = {
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  0: Reserved */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  1: MCM */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  2: DDR DRAM */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  3: LBIU */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  4: DMA 0 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  5: DMA 1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  6: DMA 2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  7: DMA 3 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  8: PCIE1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  9: PCIE2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 10: Reserved */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 11: Reserved */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 12: DUART2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 13: TSEC 1 Transmit */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 14: TSEC 1 Receive */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 15: TSEC 3 transmit */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 16: TSEC 3 receive */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 17: TSEC 3 error */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 18: TSEC 1 Receive/Transmit Error */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 19: TSEC 2 Transmit */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 20: TSEC 2 Receive */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 21: TSEC 4 transmit */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 22: TSEC 4 receive */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 23: TSEC 4 error */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 24: TSEC 2 Receive/Transmit Error */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 25: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 26: DUART1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 27: I2C */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 28: Performance Monitor */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 29: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 30: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 31: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 32: SRIO error/write-port unit */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 33: SRIO outbound doorbell */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 34: SRIO inbound doorbell */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 35: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 36: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 37: SRIO outbound message unit 1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 38: SRIO inbound message unit 1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 39: SRIO outbound message unit 2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 40: SRIO inbound message unit 2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 41: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 42: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 43: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 44: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 45: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 46: Unused */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 47: Unused */
+	0x0,						/* External  0: */
+	0x0,						/* External  1: */
+	0x0,						/* External  2: */
+	0x0,						/* External  3: */
+	0x0,						/* External  4: */
+	0x0,						/* External  5: */
+	0x0,						/* External  6: */
+	0x0,						/* External  7: */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External  8: Pixis FPGA */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* External  9: ULI 8259 INTR Cascade */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 10: Quad ETH PHY */
+	0x0,						/* External 11: */
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+};
+
+
+void __init
+mpc86xx_hpcn_init_irq(void)
+{
+	struct mpic *mpic1;
+	phys_addr_t openpic_paddr;
+
+	/* Determine the Physical Address of the OpenPIC regs */
+	openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
+
+	/* Alloc mpic structure and per isu has 16 INT entries. */
+	mpic1 = mpic_alloc(openpic_paddr,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250,
+			mpc86xx_hpcn_openpic_initsenses,
+			sizeof(mpc86xx_hpcn_openpic_initsenses),
+			" MPIC     ");
+	BUG_ON(mpic1 == NULL);
+
+	/* 48 Internal Interrupts */
+	mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200);
+	mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400);
+	mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600);
+
+	/* 16 External interrupts */
+	mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000);
+
+	mpic_init(mpic1);
+
+#ifdef CONFIG_PCI
+	mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL);
+	i8259_init(0, I8259_OFFSET);
+#endif
+}
+
+
+
+#ifdef CONFIG_PCI
+/*
+ * interrupt routing
+ */
+
+int
+mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] = {
+		/*
+		 *      PCI IDSEL/INTPIN->INTLINE
+		 *       A      B      C      D
+		 */
+		{PIRQA, PIRQB, PIRQC, PIRQD},   /* IDSEL 17 -- PCI Slot 1 */
+		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 18 -- PCI Slot 2 */
+		{0, 0, 0, 0},			/* IDSEL 19 */
+		{0, 0, 0, 0},			/* IDSEL 20 */
+		{0, 0, 0, 0},			/* IDSEL 21 */
+		{0, 0, 0, 0},			/* IDSEL 22 */
+		{0, 0, 0, 0},			/* IDSEL 23 */
+		{0, 0, 0, 0},			/* IDSEL 24 */
+		{0, 0, 0, 0},			/* IDSEL 25 */
+		{PIRQD, PIRQA, PIRQB, PIRQC},	/* IDSEL 26 -- PCI Bridge*/
+		{PIRQC, 0, 0, 0},		/* IDSEL 27 -- LAN */
+		{PIRQE, PIRQF, PIRQH, PIRQ7},	/* IDSEL 28 -- USB 1.1 */
+		{PIRQE, PIRQF, PIRQG, 0},	/* IDSEL 29 -- Audio & Modem */
+		{PIRQH, 0, 0, 0},		/* IDSEL 30 -- LPC & PMU*/
+		{PIRQD, 0, 0, 0},		/* IDSEL 31 -- ATA */
+	};
+
+	const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
+}
+
+
+int
+mpc86xx_exclude_device(u_char bus, u_char devfn)
+{
+#if !defined(CONFIG_PCI)
+	if (bus == 0 && PCI_SLOT(devfn) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+#endif
+
+	return PCIBIOS_SUCCESSFUL;
+}
+#endif /* CONFIG_PCI */
+
+
+static void __init
+mpc86xx_hpcn_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
+
+	np = of_find_node_by_type(NULL, "cpu");
+	if (np != 0) {
+		unsigned int *fp;
+
+		fp = (int *)get_property(np, "clock-frequency", NULL);
+		if (fp != 0)
+			loops_per_jiffy = *fp / HZ;
+		else
+			loops_per_jiffy = 50000000 / HZ;
+		of_node_put(np);
+	}
+
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+		add_bridge(np);
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = mpc86xx_map_irq;
+	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
+#endif
+
+	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
+
+#ifdef  CONFIG_ROOT_NFS
+	ROOT_DEV = Root_NFS;
+#else
+	ROOT_DEV = Root_HDA1;
+#endif
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+}
+
+
+void
+mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
+{
+	struct device_node *root;
+	uint memsize = total_memory;
+	const char *model = "";
+	uint svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+
+	root = of_find_node_by_path("/");
+	if (root)
+		model = get_property(root, "model", NULL);
+	seq_printf(m, "Machine\t\t: %s\n", model);
+	of_node_put(root);
+
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc86xx_hpcn_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "mpc86xx"))
+		return 1;	/* Looks good */
+
+	return 0;
+}
+
+
+void
+mpc86xx_restart(char *cmd)
+{
+	void __iomem *rstcr;
+
+	rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100);
+
+	local_irq_disable();
+
+	/* Assert reset request to Reset Control Register */
+	out_be32(rstcr, 0x2);
+
+	/* not reached */
+}
+
+
+long __init
+mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	asm volatile("isync");
+
+	return 0;
+}
+
+
+define_machine(mpc86xx_hpcn) {
+	.name			= "MPC86xx HPCN",
+	.probe			= mpc86xx_hpcn_probe,
+	.setup_arch		= mpc86xx_hpcn_setup_arch,
+	.init_IRQ		= mpc86xx_hpcn_init_irq,
+	.show_cpuinfo		= mpc86xx_hpcn_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= mpc86xx_restart,
+	.time_init		= mpc86xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/86xx/mpc86xx_pcie.c

@@ -0,0 +1,173 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * "Temporary" MPC8548 Errata file -
+ * The standard indirect_pci code should work with future silicon versions.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+
+#include "mpc86xx.h"
+
+#define PCI_CFG_OUT out_be32
+
+/* ERRATA PCI-Ex 14 PCIE Controller timeout */
+#define PCIE_FIX		out_be32(hose->cfg_addr+0x4, 0x0400ffff)
+
+
+static int
+indirect_read_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	volatile void __iomem *cfg_data;
+	u32 temp;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* Possible artifact of CDCpp50937 needs further investigation */
+	if (devfn != 0x0 && bus->number == 0xff)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	PCIE_FIX;
+	if (bus->number == 0xff) {
+		PCI_CFG_OUT(hose->cfg_addr,
+			    (0x80000000 | ((offset & 0xf00) << 16) |
+			     ((bus->number - hose->bus_offset) << 16)
+			     | (devfn << 8) | ((offset & 0xfc) )));
+	} else {
+		PCI_CFG_OUT(hose->cfg_addr,
+			    (0x80000001 | ((offset & 0xf00) << 16) |
+			     ((bus->number - hose->bus_offset) << 16)
+			     | (devfn << 8) | ((offset & 0xfc) )));
+	}
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	/* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
+	cfg_data = hose->cfg_data;
+	PCIE_FIX;
+	temp = in_le32(cfg_data);
+	switch (len) {
+	case 1:
+		*val = (temp >> (((offset & 3))*8)) & 0xff;
+		break;
+	case 2:
+		*val = (temp >> (((offset & 3))*8)) & 0xffff;
+		break;
+	default:
+		*val = temp;
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	volatile void __iomem *cfg_data;
+	u32 temp;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* Possible artifact of CDCpp50937 needs further investigation */
+	if (devfn != 0x0 && bus->number == 0xff)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	PCIE_FIX;
+	if (bus->number == 0xff) {
+		PCI_CFG_OUT(hose->cfg_addr,
+			    (0x80000000 | ((offset & 0xf00) << 16) |
+			     ((bus->number - hose->bus_offset) << 16)
+			     | (devfn << 8) | ((offset & 0xfc) )));
+	} else {
+		PCI_CFG_OUT(hose->cfg_addr,
+			    (0x80000001 | ((offset & 0xf00) << 16) |
+			     ((bus->number - hose->bus_offset) << 16)
+			     | (devfn << 8) | ((offset & 0xfc) )));
+        }
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	/* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
+	cfg_data = hose->cfg_data;
+	switch (len) {
+	case 1:
+		PCIE_FIX;
+		temp = in_le32(cfg_data);
+		temp = (temp & ~(0xff << ((offset & 3) * 8))) |
+			(val << ((offset & 3) * 8));
+		PCIE_FIX;
+		out_le32(cfg_data, temp);
+		break;
+	case 2:
+		PCIE_FIX;
+		temp = in_le32(cfg_data);
+		temp = (temp & ~(0xffff << ((offset & 3) * 8)));
+		temp |= (val << ((offset & 3) * 8)) ;
+		PCIE_FIX;
+		out_le32(cfg_data, temp);
+		break;
+	default:
+		PCIE_FIX;
+		out_le32(cfg_data, val);
+		break;
+	}
+	PCIE_FIX;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pcie_ops = {
+	indirect_read_config_pcie,
+	indirect_write_config_pcie
+};
+
+void __init
+setup_indirect_pcie_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
+	void __iomem * cfg_data)
+{
+	hose->cfg_addr = cfg_addr;
+	hose->cfg_data = cfg_data;
+	hose->ops = &indirect_pcie_ops;
+}
+
+void __init
+setup_indirect_pcie(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+{
+	unsigned long base = cfg_addr & PAGE_MASK;
+	void __iomem *mbase, *addr, *data;
+
+	mbase = ioremap(base, PAGE_SIZE);
+	addr = mbase + (cfg_addr & ~PAGE_MASK);
+	if ((cfg_data & PAGE_MASK) != base)
+		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+	data = mbase + (cfg_data & ~PAGE_MASK);
+	setup_indirect_pcie_nomap(hose, addr, data);
+}

arch/powerpc/platforms/86xx/mpc86xx_smp.c

@@ -0,0 +1,117 @@
+/*
+ * Author: Xianghua Xiao <x.xiao@freescale.com>
+ *         Zhang Wei <wei.zhang@freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/pci-bridge.h>
+#include <asm-powerpc/mpic.h>
+#include <asm/mpc86xx.h>
+#include <asm/cacheflush.h>
+
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+extern void __secondary_start_mpc86xx(void);
+extern unsigned long __secondary_hold_acknowledge;
+
+
+static void __init
+smp_86xx_release_core(int nr)
+{
+	void *mcm_vaddr;
+	unsigned long vaddr, pcr;
+
+	if (nr < 0 || nr >= NR_CPUS)
+		return;
+
+	/*
+	 * Startup Core #nr.
+	 */
+	mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET,
+			    MPC86xx_MCM_SIZE);
+	vaddr = (unsigned long)mcm_vaddr +  MCM_PORT_CONFIG_OFFSET;
+	pcr = in_be32((volatile unsigned *)vaddr);
+	pcr |= 1 << (nr + 24);
+	out_be32((volatile unsigned *)vaddr, pcr);
+}
+
+
+static void __init
+smp_86xx_kick_cpu(int nr)
+{
+	unsigned int save_vector;
+	unsigned long target, flags;
+	int n = 0;
+	volatile unsigned int *vector
+		 = (volatile unsigned int *)(KERNELBASE + 0x100);
+
+	if (nr < 0 || nr >= NR_CPUS)
+		return;
+
+	pr_debug("smp_86xx_kick_cpu: kick CPU #%d\n", nr);
+
+	local_irq_save(flags);
+	local_irq_disable();
+
+	/* Save reset vector */
+	save_vector = *vector;
+
+	/* Setup fake reset vector to call __secondary_start_mpc86xx. */
+	target = (unsigned long) __secondary_start_mpc86xx;
+	create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
+
+	/* Kick that CPU */
+	smp_86xx_release_core(nr);
+
+	/* Wait a bit for the CPU to take the exception. */
+	while ((__secondary_hold_acknowledge != nr) && (n++, n < 1000))
+		mdelay(1);
+
+	/* Restore the exception vector */
+	*vector = save_vector;
+	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+	local_irq_restore(flags);
+
+	pr_debug("wait CPU #%d for %d msecs.\n", nr, n);
+}
+
+
+static void __init
+smp_86xx_setup_cpu(int cpu_nr)
+{
+	mpic_setup_this_cpu();
+}
+
+
+struct smp_ops_t smp_86xx_ops = {
+	.message_pass = smp_mpic_message_pass,
+	.probe = smp_mpic_probe,
+	.kick_cpu = smp_86xx_kick_cpu,
+	.setup_cpu = smp_86xx_setup_cpu,
+	.take_timebase = smp_generic_take_timebase,
+	.give_timebase = smp_generic_give_timebase,
+};
+
+
+void __init
+mpc86xx_smp_init(void)
+{
+	smp_ops = &smp_86xx_ops;
+}

arch/powerpc/platforms/86xx/pci.c

@@ -0,0 +1,325 @@
+/*
+ * MPC86XX pci setup code
+ *
+ * Recode: ZHANG WEI <wei.zhang@freescale.com>
+ * Initial author: Xianghua Xiao <x.xiao@freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/immap_86xx.h>
+#include <asm/pci-bridge.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+struct pcie_outbound_window_regs {
+	uint    pexotar;               /* 0x.0 - PCI Express outbound translation address register */
+	uint    pexotear;              /* 0x.4 - PCI Express outbound translation extended address register */
+	uint    pexowbar;              /* 0x.8 - PCI Express outbound window base address register */
+	char    res1[4];
+	uint    pexowar;               /* 0x.10 - PCI Express outbound window attributes register */
+	char    res2[12];
+};
+
+struct pcie_inbound_window_regs {
+	uint    pexitar;               /* 0x.0 - PCI Express inbound translation address register */
+	char    res1[4];
+	uint    pexiwbar;              /* 0x.8 - PCI Express inbound window base address register */
+	uint    pexiwbear;             /* 0x.c - PCI Express inbound window base extended address register */
+	uint    pexiwar;               /* 0x.10 - PCI Express inbound window attributes register */
+	char    res2[12];
+};
+
+static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc)
+{
+	volatile struct ccsr_pex *pcie;
+	volatile struct pcie_outbound_window_regs *pcieow;
+	volatile struct pcie_inbound_window_regs *pcieiw;
+	int i = 0;
+
+	DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start,
+			rsrc->end - rsrc->start + 1);
+	pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+
+	/* Disable all windows (except pexowar0 since its ignored) */
+	pcie->pexowar1 = 0;
+	pcie->pexowar2 = 0;
+ 	pcie->pexowar3 = 0;
+ 	pcie->pexowar4 = 0;
+ 	pcie->pexiwar1 = 0;
+ 	pcie->pexiwar2 = 0;
+ 	pcie->pexiwar3 = 0;
+
+ 	pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1;
+ 	pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1;
+
+ 	/* Setup outbound MEM window */
+ 	for(i = 0; i < 3; i++)
+ 		if (hose->mem_resources[i].flags & IORESOURCE_MEM){
+ 			DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n",
+ 				hose->mem_resources[i].start,
+ 				hose->mem_resources[i].end
+ 				  - hose->mem_resources[i].start + 1);
+ 			pcieow->pexotar = (hose->mem_resources[i].start) >> 12
+ 				& 0x000fffff;
+ 			pcieow->pexotear = 0;
+ 			pcieow->pexowbar = (hose->mem_resources[i].start) >> 12
+ 				& 0x000fffff;
+ 			/* Enable, Mem R/W */
+ 			pcieow->pexowar = 0x80044000 |
+ 				(__ilog2(hose->mem_resources[i].end
+ 					 - hose->mem_resources[i].start + 1)
+ 				 - 1);
+ 			pcieow++;
+ 		}
+
+ 	/* Setup outbound IO window */
+ 	if (hose->io_resource.flags & IORESOURCE_IO){
+ 		DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
+ 			hose->io_resource.start,
+ 			hose->io_resource.end - hose->io_resource.start + 1,
+ 			hose->io_base_phys);
+ 		pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff;
+ 		pcieow->pexotear = 0;
+ 		pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff;
+ 		/* Enable, IO R/W */
+ 		pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end
+ 					- hose->io_resource.start + 1) - 1);
+ 	}
+
+ 	/* Setup 2G inbound Memory Window @ 0 */
+ 	pcieiw->pexitar = 0x00000000;
+ 	pcieiw->pexiwbar = 0x00000000;
+ 	/* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+ 	pcieiw->pexiwar = 0xa0f5501e;
+}
+
+static void __init
+mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
+{
+	volatile struct ccsr_pex *pcie;
+	u16 cmd;
+	unsigned int temps;
+
+	DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
+			pcie_offset, pcie_size);
+
+	pcie = ioremap(pcie_offset, pcie_size);
+
+	early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+	    | PCI_COMMAND_IO;
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
+
+	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
+
+	/* PCIE Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */
+	early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps);
+	temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
+	early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
+}
+
+int __init add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	int *bus_range;
+	int has_address = 0;
+	int primary = 0;
+
+	DBG("Adding PCIE host bridge %s\n", dev->full_name);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = (int *) get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int))
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+
+	hose = pcibios_alloc_controller();
+	if (!hose)
+		return -ENOMEM;
+	hose->arch_data = dev;
+	hose->set_cfg_type = 1;
+
+	/* last_busno = 0xfe cause by MPC8641 PCIE bug */
+	hose->first_busno = bus_range ? bus_range[0] : 0x0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xfe;
+
+	setup_indirect_pcie(hose, rsrc.start, rsrc.start + 0x4);
+
+	/* Setup the PCIE host controller. */
+	mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
+
+	if ((rsrc.start & 0xfffff) == 0x8000)
+		primary = 1;
+
+	printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. "
+	       "Firmware bus number: %d->%d\n",
+		rsrc.start, hose->first_busno, hose->last_busno);
+
+	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+		hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+	/* Setup PEX window registers */
+	setup_pcie_atmu(hose, &rsrc);
+
+	return 0;
+}
+
+static void __devinit quirk_ali1575(struct pci_dev *dev)
+{
+	unsigned short temp;
+
+	/*
+	 * ALI1575 interrupts route table setup:
+	 *
+	 * IRQ pin   IRQ#
+	 * PIRQA ---- 3
+	 * PIRQB ---- 4
+	 * PIRQC ---- 5
+	 * PIRQD ---- 6
+	 * PIRQE ---- 9
+	 * PIRQF ---- 10
+	 * PIRQG ---- 11
+	 * PIRQH ---- 12
+	 *
+	 * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
+	 *                PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
+	 */
+	pci_write_config_dword(dev, 0x48, 0xb9317542);
+
+	/* USB 1.1 OHCI controller 1, interrupt: PIRQE */
+	pci_write_config_byte(dev, 0x86, 0x0c);
+
+	/* USB 1.1 OHCI controller 2, interrupt: PIRQF */
+	pci_write_config_byte(dev, 0x87, 0x0d);
+
+	/* USB 1.1 OHCI controller 3, interrupt: PIRQH */
+	pci_write_config_byte(dev, 0x88, 0x0f);
+
+	/* USB 2.0 controller, interrupt: PIRQ7 */
+	pci_write_config_byte(dev, 0x74, 0x06);
+
+	/* Audio controller, interrupt: PIRQE */
+	pci_write_config_byte(dev, 0x8a, 0x0c);
+
+	/* Modem controller, interrupt: PIRQF */
+	pci_write_config_byte(dev, 0x8b, 0x0d);
+
+	/* HD audio controller, interrupt: PIRQG */
+	pci_write_config_byte(dev, 0x8c, 0x0e);
+
+	/* Serial ATA interrupt: PIRQD */
+	pci_write_config_byte(dev, 0x8d, 0x0b);
+
+	/* SMB interrupt: PIRQH */
+	pci_write_config_byte(dev, 0x8e, 0x0f);
+
+	/* PMU ACPI SCI interrupt: PIRQH */
+	pci_write_config_byte(dev, 0x8f, 0x0f);
+
+	/* Primary PATA IDE IRQ: 14
+	 * Secondary PATA IDE IRQ: 15
+	 */
+	pci_write_config_byte(dev, 0x44, 0x3d);
+	pci_write_config_byte(dev, 0x75, 0x0f);
+
+	/* Set IRQ14 and IRQ15 to legacy IRQs */
+	pci_read_config_word(dev, 0x46, &temp);
+	temp |= 0xc000;
+	pci_write_config_word(dev, 0x46, temp);
+
+	/* Set i8259 interrupt trigger
+	 * IRQ 3:  Level
+	 * IRQ 4:  Level
+	 * IRQ 5:  Level
+	 * IRQ 6:  Level
+	 * IRQ 7:  Level
+	 * IRQ 9:  Level
+	 * IRQ 10: Level
+	 * IRQ 11: Level
+	 * IRQ 12: Level
+	 * IRQ 14: Edge
+	 * IRQ 15: Edge
+	 */
+	outb(0xfa, 0x4d0);
+	outb(0x1e, 0x4d1);
+}
+
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+
+	pci_read_config_byte(dev,0x83,&c);
+	c |= 0x80;
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_write_config_byte(dev, 0x09, 0x01);
+	pci_write_config_byte(dev, 0x0a, 0x06);
+
+	pci_read_config_byte(dev,0x83,&c);
+	c &= 0x7f;
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_read_config_byte(dev,0x84,&c);
+	c |= 0x01;
+	pci_write_config_byte(dev, 0x84, c);
+}
+
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned short temp;
+	pci_write_config_word(dev, 0x04, 0x0405);
+	pci_read_config_word(dev, 0x4a, &temp);
+	temp |= 0x1000;
+	pci_write_config_word(dev, 0x4a, temp);
+}
+
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+	unsigned char temp;
+	pci_write_config_word(dev, 0x04, 0x0007);
+	pci_read_config_byte(dev, 0x7c, &temp);
+	pci_write_config_byte(dev, 0x7c, 0x80);
+	pci_write_config_byte(dev, 0x09, 0x01);
+	pci_write_config_byte(dev, 0x7c, temp);
+	dev->class |= 0x1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);

arch/powerpc/platforms/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_PPC_CHRP)		+= chrp/
 obj-$(CONFIG_4xx)		+= 4xx/
 obj-$(CONFIG_PPC_83xx)		+= 83xx/
 obj-$(CONFIG_PPC_85xx)		+= 85xx/
+obj-$(CONFIG_PPC_86xx)		+= 86xx/
 obj-$(CONFIG_PPC_PSERIES)	+= pseries/
 obj-$(CONFIG_PPC_ISERIES)	+= iseries/
 obj-$(CONFIG_PPC_MAPLE)		+= maple/

arch/powerpc/platforms/cell/Kconfig

@@ -5,15 +5,24 @@ config SPU_FS
 	tristate "SPU file system"
 	default m
 	depends on PPC_CELL
+	select SPU_BASE
 	help
 	  The SPU file system is used to access Synergistic Processing
 	  Units on machines implementing the Broadband Processor
 	  Architecture.
 
+config SPU_BASE
+	bool
+	default n
+
 config SPUFS_MMAP
 	bool
 	depends on SPU_FS && SPARSEMEM
 	select MEMORY_HOTPLUG
 	default y
 
+config CBE_RAS
+	bool "RAS features for bare metal Cell BE"
+	default y
+
 endmenu

arch/powerpc/platforms/cell/Makefile

@@ -1,16 +1,15 @@
-obj-y			+= interrupt.o iommu.o setup.o spider-pic.o
-obj-y			+= pervasive.o
+obj-$(CONFIG_PPC_CELL_NATIVE)		+= interrupt.o iommu.o setup.o \
+					   cbe_regs.o spider-pic.o pervasive.o
+obj-$(CONFIG_CBE_RAS)			+= ras.o
 
-obj-$(CONFIG_SMP)	+= smp.o
-obj-$(CONFIG_SPU_FS)	+= spu-base.o spufs/
-
-spu-base-y		+= spu_base.o spu_priv1.o
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_PPC_CELL_NATIVE)		+= smp.o
+endif
 
 # needed only when building loadable spufs.ko
-spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o
-obj-y			+= $(spufs-modular-m)
-
-# always needed in kernel
-spufs-builtin-$(CONFIG_SPU_FS) += spu_callbacks.o
-obj-y			+= $(spufs-builtin-y) $(spufs-builtin-m)
+spufs-modular-$(CONFIG_SPU_FS)		+= spu_syscalls.o
+spu-priv1-$(CONFIG_PPC_CELL_NATIVE)	+= spu_priv1_mmio.o
 
+obj-$(CONFIG_SPU_BASE)			+= spu_callbacks.o spu_base.o \
+					   $(spufs-modular-m) \
+					   $(spu-priv1-y) spufs/

arch/powerpc/platforms/cell/cbe_regs.c

@@ -0,0 +1,128 @@
+/*
+ * cbe_regs.c
+ *
+ * Accessor routines for the various MMIO register blocks of the CBE
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+
+#include <linux/config.h>
+#include <linux/percpu.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/ptrace.h>
+
+#include "cbe_regs.h"
+
+#define MAX_CBE		2
+
+/*
+ * Current implementation uses "cpu" nodes. We build our own mapping
+ * array of cpu numbers to cpu nodes locally for now to allow interrupt
+ * time code to have a fast path rather than call of_get_cpu_node(). If
+ * we implement cpu hotplug, we'll have to install an appropriate norifier
+ * in order to release references to the cpu going away
+ */
+static struct cbe_regs_map
+{
+	struct device_node *cpu_node;
+	struct cbe_pmd_regs __iomem *pmd_regs;
+	struct cbe_iic_regs __iomem *iic_regs;
+} cbe_regs_maps[MAX_CBE];
+static int cbe_regs_map_count;
+
+static struct cbe_thread_map
+{
+	struct device_node *cpu_node;
+	struct cbe_regs_map *regs;
+} cbe_thread_map[NR_CPUS];
+
+static struct cbe_regs_map *cbe_find_map(struct device_node *np)
+{
+	int i;
+
+	for (i = 0; i < cbe_regs_map_count; i++)
+		if (cbe_regs_maps[i].cpu_node == np)
+			return &cbe_regs_maps[i];
+	return NULL;
+}
+
+struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np)
+{
+	struct cbe_regs_map *map = cbe_find_map(np);
+	if (map == NULL)
+		return NULL;
+	return map->pmd_regs;
+}
+
+struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu)
+{
+	struct cbe_regs_map *map = cbe_thread_map[cpu].regs;
+	if (map == NULL)
+		return NULL;
+	return map->pmd_regs;
+}
+
+
+struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np)
+{
+	struct cbe_regs_map *map = cbe_find_map(np);
+	if (map == NULL)
+		return NULL;
+	return map->iic_regs;
+}
+struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu)
+{
+	struct cbe_regs_map *map = cbe_thread_map[cpu].regs;
+	if (map == NULL)
+		return NULL;
+	return map->iic_regs;
+}
+
+void __init cbe_regs_init(void)
+{
+	int i;
+	struct device_node *cpu;
+
+	/* Build local fast map of CPUs */
+	for_each_cpu(i)
+		cbe_thread_map[i].cpu_node = of_get_cpu_node(i, NULL);
+
+	/* Find maps for each device tree CPU */
+	for_each_node_by_type(cpu, "cpu") {
+		struct cbe_regs_map *map = &cbe_regs_maps[cbe_regs_map_count++];
+
+		/* That hack must die die die ! */
+		struct address_prop {
+			unsigned long address;
+			unsigned int len;
+		} __attribute__((packed)) *prop;
+
+
+		if (cbe_regs_map_count > MAX_CBE) {
+			printk(KERN_ERR "cbe_regs: More BE chips than supported"
+			       "!\n");
+			cbe_regs_map_count--;
+			return;
+		}
+		map->cpu_node = cpu;
+		for_each_cpu(i)
+			if (cbe_thread_map[i].cpu_node == cpu)
+				cbe_thread_map[i].regs = map;
+
+		prop = (struct address_prop *)get_property(cpu, "pervasive",
+							   NULL);
+		if (prop != NULL)
+			map->pmd_regs = ioremap(prop->address, prop->len);
+
+		prop = (struct address_prop *)get_property(cpu, "iic",
+							   NULL);
+		if (prop != NULL)
+			map->iic_regs = ioremap(prop->address, prop->len);
+	}
+}
+

arch/powerpc/platforms/cell/cbe_regs.h

@@ -0,0 +1,129 @@
+/*
+ * cbe_regs.h
+ *
+ * This file is intended to hold the various register definitions for CBE
+ * on-chip system devices (memory controller, IO controller, etc...)
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+#ifndef CBE_REGS_H
+#define CBE_REGS_H
+
+/*
+ *
+ * Some HID register definitions
+ *
+ */
+
+/* CBE specific HID0 bits */
+#define HID0_CBE_THERM_WAKEUP	0x0000020000000000ul
+#define HID0_CBE_SYSERR_WAKEUP	0x0000008000000000ul
+#define HID0_CBE_THERM_INT_EN	0x0000000400000000ul
+#define HID0_CBE_SYSERR_INT_EN	0x0000000200000000ul
+
+
+/*
+ *
+ * Pervasive unit register definitions
+ *
+ */
+
+struct cbe_pmd_regs {
+	u8 pad_0x0000_0x0800[0x0800 - 0x0000];			/* 0x0000 */
+
+	/* Thermal Sensor Registers */
+	u64  ts_ctsr1;						/* 0x0800 */
+	u64  ts_ctsr2;						/* 0x0808 */
+	u64  ts_mtsr1;						/* 0x0810 */
+	u64  ts_mtsr2;						/* 0x0818 */
+	u64  ts_itr1;						/* 0x0820 */
+	u64  ts_itr2;						/* 0x0828 */
+	u64  ts_gitr;						/* 0x0830 */
+	u64  ts_isr;						/* 0x0838 */
+	u64  ts_imr;						/* 0x0840 */
+	u64  tm_cr1;						/* 0x0848 */
+	u64  tm_cr2;						/* 0x0850 */
+	u64  tm_simr;						/* 0x0858 */
+	u64  tm_tpr;						/* 0x0860 */
+	u64  tm_str1;						/* 0x0868 */
+	u64  tm_str2;						/* 0x0870 */
+	u64  tm_tsr;						/* 0x0878 */
+
+	/* Power Management */
+	u64  pm_control;					/* 0x0880 */
+#define CBE_PMD_PAUSE_ZERO_CONTROL		0x10000
+	u64  pm_status;						/* 0x0888 */
+
+	/* Time Base Register */
+	u64  tbr;						/* 0x0890 */
+
+	u8   pad_0x0898_0x0c00 [0x0c00 - 0x0898];		/* 0x0898 */
+
+	/* Fault Isolation Registers */
+	u64  checkstop_fir;					/* 0x0c00 */
+	u64  recoverable_fir;
+	u64  spec_att_mchk_fir;
+	u64  fir_mode_reg;
+	u64  fir_enable_mask;
+
+	u8   pad_0x0c28_0x1000 [0x1000 - 0x0c28];		/* 0x0c28 */
+};
+
+extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
+extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
+
+/*
+ *
+ * IIC unit register definitions
+ *
+ */
+
+struct cbe_iic_pending_bits {
+	u32 data;
+	u8 flags;
+	u8 class;
+	u8 source;
+	u8 prio;
+};
+
+#define CBE_IIC_IRQ_VALID	0x80
+#define CBE_IIC_IRQ_IPI		0x40
+
+struct cbe_iic_thread_regs {
+	struct cbe_iic_pending_bits pending;
+	struct cbe_iic_pending_bits pending_destr;
+	u64 generate;
+	u64 prio;
+};
+
+struct cbe_iic_regs {
+	u8	pad_0x0000_0x0400[0x0400 - 0x0000];		/* 0x0000 */
+
+	/* IIC interrupt registers */
+	struct	cbe_iic_thread_regs thread[2];			/* 0x0400 */
+	u64     iic_ir;						/* 0x0440 */
+	u64     iic_is;						/* 0x0448 */
+
+	u8	pad_0x0450_0x0500[0x0500 - 0x0450];		/* 0x0450 */
+
+	/* IOC FIR */
+	u64	ioc_fir_reset;					/* 0x0500 */
+	u64	ioc_fir_set;
+	u64	ioc_checkstop_enable;
+	u64	ioc_fir_error_mask;
+	u64	ioc_syserr_enable;
+	u64	ioc_fir;
+
+	u8	pad_0x0530_0x1000[0x1000 - 0x0530];		/* 0x0530 */
+};
+
+extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
+extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
+
+
+/* Init this module early */
+extern void cbe_regs_init(void);
+
+
+#endif /* CBE_REGS_H */

arch/powerpc/platforms/cell/interrupt.c

@@ -33,29 +33,10 @@
 #include <asm/ptrace.h>
 
 #include "interrupt.h"
-
-struct iic_pending_bits {
-	u32 data;
-	u8 flags;
-	u8 class;
-	u8 source;
-	u8 prio;
-};
-
-enum iic_pending_flags {
-	IIC_VALID = 0x80,
-	IIC_IPI   = 0x40,
-};
-
-struct iic_regs {
-	struct iic_pending_bits pending;
-	struct iic_pending_bits pending_destr;
-	u64 generate;
-	u64 prio;
-};
+#include "cbe_regs.h"
 
 struct iic {
-	struct iic_regs __iomem *regs;
+	struct cbe_iic_thread_regs __iomem *regs;
 	u8 target_id;
 };
 
@@ -115,7 +96,7 @@ static struct hw_interrupt_type iic_pic = {
 	.end = iic_end,
 };
 
-static int iic_external_get_irq(struct iic_pending_bits pending)
+static int iic_external_get_irq(struct cbe_iic_pending_bits pending)
 {
 	int irq;
 	unsigned char node, unit;
@@ -136,8 +117,7 @@ static int iic_external_get_irq(struct iic_pending_bits pending)
 		 * One of these units can be connected
 		 * to an external interrupt controller.
 		 */
-		if (pending.prio > 0x3f ||
-		    pending.class != 2)
+		if (pending.class != 2)
 			break;
 		irq = IIC_EXT_OFFSET
 			+ spider_get_irq(node)
@@ -168,15 +148,15 @@ int iic_get_irq(struct pt_regs *regs)
 {
 	struct iic *iic;
 	int irq;
-	struct iic_pending_bits pending;
+	struct cbe_iic_pending_bits pending;
 
 	iic = &__get_cpu_var(iic);
 	*(unsigned long *) &pending = 
 		in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
 
 	irq = -1;
-	if (pending.flags & IIC_VALID) {
-		if (pending.flags & IIC_IPI) {
+	if (pending.flags & CBE_IIC_IRQ_VALID) {
+		if (pending.flags & CBE_IIC_IRQ_IPI) {
 			irq = IIC_IPI_OFFSET + (pending.prio >> 4);
 /*
 			if (irq > 0x80)
@@ -226,7 +206,7 @@ static int setup_iic_hardcoded(void)
 			regs += 0x20;
 
 		printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs);
-		iic->regs = ioremap(regs, sizeof(struct iic_regs));
+		iic->regs = ioremap(regs, sizeof(struct cbe_iic_thread_regs));
 		iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
 	}
 
@@ -267,12 +247,12 @@ static int setup_iic(void)
 		}
 
  		iic = &per_cpu(iic, np[0]);
- 		iic->regs = ioremap(regs[0], sizeof(struct iic_regs));
+ 		iic->regs = ioremap(regs[0], sizeof(struct cbe_iic_thread_regs));
 		iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe);
  		printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs);
 
  		iic = &per_cpu(iic, np[1]);
- 		iic->regs = ioremap(regs[2], sizeof(struct iic_regs));
+ 		iic->regs = ioremap(regs[2], sizeof(struct cbe_iic_thread_regs));
 		iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe);
  		printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs);
 

arch/powerpc/platforms/cell/iommu.c

@@ -473,6 +473,16 @@ static int cell_dma_supported(struct device *dev, u64 mask)
 	return mask < 0x100000000ull;
 }
 
+static struct dma_mapping_ops cell_iommu_ops = {
+	.alloc_coherent = cell_alloc_coherent,
+	.free_coherent = cell_free_coherent,
+	.map_single = cell_map_single,
+	.unmap_single = cell_unmap_single,
+	.map_sg = cell_map_sg,
+	.unmap_sg = cell_unmap_sg,
+	.dma_supported = cell_dma_supported,
+};
+
 void cell_init_iommu(void)
 {
 	int setup_bus = 0;
@@ -498,11 +508,5 @@ void cell_init_iommu(void)
 		}
 	}
 
-	pci_dma_ops.alloc_coherent = cell_alloc_coherent;
-	pci_dma_ops.free_coherent = cell_free_coherent;
-	pci_dma_ops.map_single = cell_map_single;
-	pci_dma_ops.unmap_single = cell_unmap_single;
-	pci_dma_ops.map_sg = cell_map_sg;
-	pci_dma_ops.unmap_sg = cell_unmap_sg;
-	pci_dma_ops.dma_supported = cell_dma_supported;
+	pci_dma_ops = cell_iommu_ops;
 }

arch/powerpc/platforms/cell/pervasive.c

@@ -37,36 +37,28 @@
 #include <asm/reg.h>
 
 #include "pervasive.h"
+#include "cbe_regs.h"
 
 static DEFINE_SPINLOCK(cbe_pervasive_lock);
-struct cbe_pervasive {
-	struct pmd_regs __iomem *regs;
-	unsigned int thread;
-};
-
-/* can't use per_cpu from setup_arch */
-static struct cbe_pervasive cbe_pervasive[NR_CPUS];
 
 static void __init cbe_enable_pause_zero(void)
 {
 	unsigned long thread_switch_control;
 	unsigned long temp_register;
-	struct cbe_pervasive *p;
-	int thread;
+	struct cbe_pmd_regs __iomem *pregs;
 
 	spin_lock_irq(&cbe_pervasive_lock);
-	p = &cbe_pervasive[smp_processor_id()];
-
-	if (!cbe_pervasive->regs)
+	pregs = cbe_get_cpu_pmd_regs(smp_processor_id());
+	if (pregs == NULL)
 		goto out;
 
 	pr_debug("Power Management: CPU %d\n", smp_processor_id());
 
 	 /* Enable Pause(0) control bit */
-	temp_register = in_be64(&p->regs->pm_control);
+	temp_register = in_be64(&pregs->pm_control);
 
-	out_be64(&p->regs->pm_control,
-		 temp_register|PMD_PAUSE_ZERO_CONTROL);
+	out_be64(&pregs->pm_control,
+		 temp_register | CBE_PMD_PAUSE_ZERO_CONTROL);
 
 	/* Enable DEC and EE interrupt request */
 	thread_switch_control  = mfspr(SPRN_TSC_CELL);
@@ -75,25 +67,16 @@ static void __init cbe_enable_pause_zero(void)
 	switch ((mfspr(SPRN_CTRLF) & CTRL_CT)) {
 	case CTRL_CT0:
 		thread_switch_control |= TSC_CELL_DEC_ENABLE_0;
-		thread = 0;
 		break;
 	case CTRL_CT1:
 		thread_switch_control |= TSC_CELL_DEC_ENABLE_1;
-		thread = 1;
 		break;
 	default:
 		printk(KERN_WARNING "%s: unknown configuration\n",
 			__FUNCTION__);
-		thread = -1;
 		break;
 	}
 
-	if (p->thread != thread)
-		printk(KERN_WARNING "%s: device tree inconsistant, "
-				     "cpu %i: %d/%d\n", __FUNCTION__,
-				     smp_processor_id(),
-				     p->thread, thread);
-
 	mtspr(SPRN_TSC_CELL, thread_switch_control);
 
 out:
@@ -104,6 +87,11 @@ static void cbe_idle(void)
 {
 	unsigned long ctrl;
 
+	/* Why do we do that on every idle ? Couldn't that be done once for
+	 * all or do we lose the state some way ? Also, the pm_control
+	 * register setting, that can't be set once at boot ? We really want
+	 * to move that away in order to implement a simple powersave
+	 */
 	cbe_enable_pause_zero();
 
 	while (1) {
@@ -152,8 +140,15 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 		timer_interrupt(regs);
 		break;
 	case SRR1_WAKEMT:
-		/* no action required */
 		break;
+#ifdef CONFIG_CBE_RAS
+	case SRR1_WAKESYSERR:
+		cbe_system_error_exception(regs);
+		break;
+	case SRR1_WAKETHERM:
+		cbe_thermal_exception(regs);
+		break;
+#endif /* CONFIG_CBE_RAS */
 	default:
 		/* do system reset */
 		return 0;
@@ -162,68 +157,11 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 	return 1;
 }
 
-static int __init cbe_find_pmd_mmio(int cpu, struct cbe_pervasive *p)
-{
-	struct device_node *node;
-	unsigned int *int_servers;
-	char *addr;
-	unsigned long real_address;
-	unsigned int size;
-
-	struct pmd_regs __iomem *pmd_mmio_area;
-	int hardid, thread;
-	int proplen;
-
-	pmd_mmio_area = NULL;
-	hardid = get_hard_smp_processor_id(cpu);
-	for (node = NULL; (node = of_find_node_by_type(node, "cpu"));) {
-		int_servers = (void *) get_property(node,
-				"ibm,ppc-interrupt-server#s", &proplen);
-		if (!int_servers) {
-			printk(KERN_WARNING "%s misses "
-				"ibm,ppc-interrupt-server#s property",
-				node->full_name);
-			continue;
-		}
-		for (thread = 0; thread < proplen / sizeof (int); thread++) {
-			if (hardid == int_servers[thread]) {
-				addr = get_property(node, "pervasive", NULL);
-				goto found;
-			}
-		}
-	}
-
-	printk(KERN_WARNING "%s: CPU %d not found\n", __FUNCTION__, cpu);
-	return -EINVAL;
-
-found:
-	real_address = *(unsigned long*) addr;
-	addr += sizeof (unsigned long);
-	size = *(unsigned int*) addr;
-
-	pr_debug("pervasive area for CPU %d at %lx, size %x\n",
-			cpu, real_address, size);
-	p->regs = ioremap(real_address, size);
-	p->thread = thread;
-	return 0;
-}
-
-void __init cell_pervasive_init(void)
+void __init cbe_pervasive_init(void)
 {
-	struct cbe_pervasive *p;
-	int cpu;
-	int ret;
-
 	if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
 		return;
 
-	for_each_possible_cpu(cpu) {
-		p = &cbe_pervasive[cpu];
-		ret = cbe_find_pmd_mmio(cpu, p);
-		if (ret)
-			return;
-	}
-
 	ppc_md.idle_loop = cbe_idle;
 	ppc_md.system_reset_exception = cbe_system_reset_exception;
 }