Merge branch 'mlx4'

Amir Vadai says:

====================
net/mlx4: Mellanox driver update 15-10-2013

This patchset contains small code cleaning patches, and a patch to make
mlx4_core use module_request() in order to load the relevant link layer module
(mlx4_en or mlx4_ib) according to the port type.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx4/cmd.c

@@ -2253,7 +2253,6 @@ EXPORT_SYMBOL_GPL(mlx4_set_vf_mac);
 int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
-	struct mlx4_vport_oper_state *vf_oper;
 	struct mlx4_vport_state *vf_admin;
 	int slave;
 
@@ -2269,7 +2268,6 @@ int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos)
 		return -EINVAL;
 
 	vf_admin = &priv->mfunc.master.vf_admin[slave].vport[port];
-	vf_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
 
 	if ((0 == vlan) && (0 == qos))
 		vf_admin->default_vlan = MLX4_VGT;

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -1733,7 +1733,7 @@ void mlx4_en_stop_port(struct net_device *dev, int detach)
 
 	/* Unregister Mac address for the port */
 	mlx4_en_put_qp(priv);
-	if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN))
+	if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_REASSIGN_MAC_EN))
 		mdev->mac_removed[priv->port] = 1;
 
 	/* Free RX Rings */

drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -652,7 +652,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 		 QUERY_DEV_CAP_RSVD_LKEY_OFFSET);
 	MLX4_GET(field, outbox, QUERY_DEV_CAP_FW_REASSIGN_MAC);
 	if (field & 1<<6)
-		dev_cap->flags2 |= MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN;
+		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_REASSIGN_MAC_EN;
 	MLX4_GET(dev_cap->max_icm_sz, outbox,
 		 QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET);
 	if (dev_cap->flags & MLX4_DEV_CAP_FLAG_COUNTERS)
@@ -1713,7 +1713,6 @@ void mlx4_opreq_action(struct work_struct *work)
 	u32 *outbox;
 	u32 modifier;
 	u16 token;
-	u16 type_m;
 	u16 type;
 	int err;
 	u32 num_qps;
@@ -1746,7 +1745,6 @@ void mlx4_opreq_action(struct work_struct *work)
 		MLX4_GET(modifier, outbox, GET_OP_REQ_MODIFIER_OFFSET);
 		MLX4_GET(token, outbox, GET_OP_REQ_TOKEN_OFFSET);
 		MLX4_GET(type, outbox, GET_OP_REQ_TYPE_OFFSET);
-		type_m = type >> 12;
 		type &= 0xfff;
 
 		switch (type) {

drivers/net/ethernet/mellanox/mlx4/main.c

@@ -42,6 +42,7 @@
 #include <linux/io-mapping.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
+#include <linux/kmod.h>
 
 #include <linux/mlx4/device.h>
 #include <linux/mlx4/doorbell.h>
@@ -650,6 +651,27 @@ err_mem:
 	return err;
 }
 
+static void mlx4_request_modules(struct mlx4_dev *dev)
+{
+	int port;
+	int has_ib_port = false;
+	int has_eth_port = false;
+#define EN_DRV_NAME	"mlx4_en"
+#define IB_DRV_NAME	"mlx4_ib"
+
+	for (port = 1; port <= dev->caps.num_ports; port++) {
+		if (dev->caps.port_type[port] == MLX4_PORT_TYPE_IB)
+			has_ib_port = true;
+		else if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH)
+			has_eth_port = true;
+	}
+
+	if (has_ib_port)
+		request_module_nowait(IB_DRV_NAME);
+	if (has_eth_port)
+		request_module_nowait(EN_DRV_NAME);
+}
+
 /*
  * Change the port configuration of the device.
  * Every user of this function must hold the port mutex.
@@ -681,6 +703,11 @@ int mlx4_change_port_types(struct mlx4_dev *dev,
 		}
 		mlx4_set_port_mask(dev);
 		err = mlx4_register_device(dev);
+		if (err) {
+			mlx4_err(dev, "Failed to register device\n");
+			goto out;
+		}
+		mlx4_request_modules(dev);
 	}
 
 out:
@@ -2305,6 +2332,8 @@ slave_start:
 	if (err)
 		goto err_port;
 
+	mlx4_request_modules(dev);
+
 	mlx4_sense_init(dev);
 	mlx4_start_sense(dev);
 

drivers/net/ethernet/mellanox/mlx4/mcg.c

@@ -645,7 +645,7 @@ static const u8 __promisc_mode[] = {
 int mlx4_map_sw_to_hw_steering_mode(struct mlx4_dev *dev,
 				    enum mlx4_net_trans_promisc_mode flow_type)
 {
-	if (flow_type >= MLX4_FS_MODE_NUM || flow_type < 0) {
+	if (flow_type >= MLX4_FS_MODE_NUM) {
 		mlx4_err(dev, "Invalid flow type. type = %d\n", flow_type);
 		return -EINVAL;
 	}
@@ -681,7 +681,7 @@ const u16 __sw_id_hw[] = {
 int mlx4_map_sw_to_hw_steering_id(struct mlx4_dev *dev,
 				  enum mlx4_net_trans_rule_id id)
 {
-	if (id >= MLX4_NET_TRANS_RULE_NUM || id < 0) {
+	if (id >= MLX4_NET_TRANS_RULE_NUM) {
 		mlx4_err(dev, "Invalid network rule id. id = %d\n", id);
 		return -EINVAL;
 	}
@@ -706,7 +706,7 @@ static const int __rule_hw_sz[] = {
 int mlx4_hw_rule_sz(struct mlx4_dev *dev,
 	       enum mlx4_net_trans_rule_id id)
 {
-	if (id >= MLX4_NET_TRANS_RULE_NUM || id < 0) {
+	if (id >= MLX4_NET_TRANS_RULE_NUM) {
 		mlx4_err(dev, "Invalid network rule id. id = %d\n", id);
 		return -EINVAL;
 	}

drivers/net/ethernet/mellanox/mlx4/srq.c

@@ -34,6 +34,7 @@
 #include <linux/init.h>
 
 #include <linux/mlx4/cmd.h>
+#include <linux/mlx4/srq.h>
 #include <linux/export.h>
 #include <linux/gfp.h>
 

include/linux/mlx4/cmd.h

@@ -154,10 +154,6 @@ enum {
 	MLX4_CMD_QUERY_IF_STAT	 = 0X54,
 	MLX4_CMD_SET_IF_STAT	 = 0X55,
 
-	/* set port opcode modifiers */
-	MLX4_SET_PORT_PRIO2TC = 0x8,
-	MLX4_SET_PORT_SCHEDULER  = 0x9,
-
 	/* register/delete flow steering network rules */
 	MLX4_QP_FLOW_STEERING_ATTACH = 0x65,
 	MLX4_QP_FLOW_STEERING_DETACH = 0x66,
@@ -182,6 +178,8 @@ enum {
 	MLX4_SET_PORT_VLAN_TABLE = 0x3,
 	MLX4_SET_PORT_PRIO_MAP  = 0x4,
 	MLX4_SET_PORT_GID_TABLE = 0x5,
+	MLX4_SET_PORT_PRIO2TC	= 0x8,
+	MLX4_SET_PORT_SCHEDULER = 0x9,
 };
 
 enum {

include/linux/mlx4/device.h

@@ -155,7 +155,7 @@ enum {
 	MLX4_DEV_CAP_FLAG2_RSS_TOP		= 1LL <<  1,
 	MLX4_DEV_CAP_FLAG2_RSS_XOR		= 1LL <<  2,
 	MLX4_DEV_CAP_FLAG2_FS_EN		= 1LL <<  3,
-	MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN	= 1LL <<  4,
+	MLX4_DEV_CAP_FLAG2_REASSIGN_MAC_EN	= 1LL <<  4,
 	MLX4_DEV_CAP_FLAG2_TS			= 1LL <<  5,
 	MLX4_DEV_CAP_FLAG2_VLAN_CONTROL		= 1LL <<  6,
 	MLX4_DEV_CAP_FLAG2_FSM			= 1LL <<  7,