Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Documentation/DocBook/media_api.tmpl

@@ -1,6 +1,6 @@
 <?xml version="1.0"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
 <!ENTITY % media-entities SYSTEM "./media-entities.tmpl"> %media-entities;
 <!ENTITY media-indices SYSTEM "./media-indices.tmpl">
 

Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt

@@ -4,7 +4,7 @@
 Required properties :
 
  - reg             : Offset and length of the register set for the device
- - compatible      : Should be "marvell,mv64xxx-i2c"
+ - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
  - interrupts      : The interrupt number
 
 Optional properties :

Documentation/devicetree/bindings/regulator/palmas-pmic.txt

@@ -31,9 +31,8 @@ Optional nodes:
 	       Optional sub-node properties:
 	       ti,warm-reset - maintain voltage during warm reset(boolean)
 	       ti,roof-floor - control voltage selection by pin(boolean)
-	       ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto,
+	       ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
 	       2 - eco, 3 - forced pwm
-	       ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us
 	       ti,smps-range - OTP has the wrong range set for the hardware so override
 	       0 - low range, 1 - high range.
 
@@ -59,7 +58,6 @@ pmic {
 			ti,warm-reset;
 			ti,roof-floor;
 			ti,mode-sleep = <0>;
-			ti,tstep = <0>;
 			ti,smps-range = <1>;
 		};
 

MAINTAINERS

@@ -965,6 +965,12 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
+M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-keystone/
+
 ARM/LOGICPD PXA270 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1259,7 +1265,6 @@ F:	drivers/rtc/rtc-coh901331.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 
 ARM/Ux500 ARM ARCHITECTURE
-M:	Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -5576,9 +5581,9 @@ S:	Maintained
 F:	drivers/media/tuners/mxl5007t.*
 
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-M:	Andrew Gallatin <gallatin@myri.com>
+M:	Hyong-Youb Kim <hykim@myri.com>
 L:	netdev@vger.kernel.org
-W:	http://www.myri.com/scs/download-Myri10GE.html
+W:	https://www.myricom.com/support/downloads/myri10ge.html
 S:	Supported
 F:	drivers/net/ethernet/myricom/myri10ge/
 
@@ -8665,6 +8670,11 @@ T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
 F:	sound/usb/midi.*
 
+USB NETWORKING DRIVERS
+L:	linux-usb@vger.kernel.org
+S:	Odd Fixes
+F:	drivers/net/usb/
+
 USB OHCI DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Linux for Workgroups
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -407,6 +407,12 @@ config CLONE_BACKWARDS2
 	help
 	  Architecture has the first two arguments of clone(2) swapped.
 
+config CLONE_BACKWARDS3
+	bool
+	help
+	  Architecture has tls passed as the 3rd argument of clone(2),
+	  not the 5th one.
+
 config ODD_RT_SIGACTION
 	bool
 	help

arch/arm/boot/dts/msm8960-cdp.dts

@@ -26,7 +26,7 @@
 		cpu-offset = <0x80000>;
 	};
 
-	msmgpio: gpio@fd510000 {
+	msmgpio: gpio@800000 {
 		compatible = "qcom,msm-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -34,7 +34,7 @@
 		interrupts = <0 32 0x4>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		reg = <0xfd510000 0x4000>;
+		reg = <0x800000 0x4000>;
 	};
 
 	serial@16440000 {

arch/arm/boot/dts/omap5-uevm.dts

@@ -235,7 +235,7 @@
 };
 
 &mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
+	vmmc-supply = <&ldo9_reg>;
 	bus-width = <4>;
 };
 
@@ -282,6 +282,7 @@
 
 			regulators {
 				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
 					regulator-name = "smps123";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1500000>;
@@ -290,6 +291,7 @@
 				};
 
 				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
 					regulator-name = "smps45";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1310000>;
@@ -298,6 +300,7 @@
 				};
 
 				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -306,6 +309,7 @@
 				};
 
 				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -314,6 +318,7 @@
 				};
 
 				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
 					regulator-name = "smps8";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1310000>;
@@ -322,15 +327,15 @@
 				};
 
 				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
 					regulator-name = "smps9";
 					regulator-min-microvolt = <2100000>;
 					regulator-max-microvolt = <2100000>;
-					regulator-always-on;
-					regulator-boot-on;
 					ti,smps-range = <0x80>;
 				};
 
 				smps10_reg: smps10 {
+					/* VBUS_5V_OTG */
 					regulator-name = "smps10";
 					regulator-min-microvolt = <5000000>;
 					regulator-max-microvolt = <5000000>;
@@ -339,38 +344,40 @@
 				};
 
 				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
 				};
 
 				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
 					regulator-name = "ldo2";
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
 				};
 
 				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
 					regulator-name = "ldo3";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
 					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
 				};
 
 				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
 				};
 
 				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
 					regulator-name = "ldo5";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -379,38 +386,43 @@
 				};
 
 				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 					regulator-name = "ldo6";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 
 				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
 					regulator-name = "ldo7";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
 				};
 
 				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
 					regulator-name = "ldo8";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
 					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
 				};
 
 				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
 					regulator-name = "ldo9";
 					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
+					regulator-max-microvolt = <3000000>;
 					regulator-boot-on;
 				};
 
 				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 					regulator-name = "ldoln";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -419,12 +431,20 @@
 				};
 
 				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
 					regulator-name = "ldousb";
 					regulator-min-microvolt = <3250000>;
 					regulator-max-microvolt = <3250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
 			};
 		};
 	};

arch/arm/boot/dts/stih41x.dtsi

@@ -6,10 +6,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 		};
 		cpu@1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 		};

arch/arm/boot/dts/tegra20-colibri-512.dtsi

@@ -457,6 +457,7 @@
 	};
 
 	usb-phy@c5004000 {
+		status = "okay";
 		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
 			GPIO_ACTIVE_LOW>;
 	};

arch/arm/include/asm/tlb.h

@@ -43,6 +43,7 @@ struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
 	struct vm_area_struct	*vma;
+	unsigned long		start, end;
 	unsigned long		range_start;
 	unsigned long		range_end;
 	unsigned int		nr;
@@ -107,10 +108,12 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 }
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
-	tlb->fullmm = fullmm;
+	tlb->fullmm = !(start | (end+1));
+	tlb->start = start;
+	tlb->end = end;
 	tlb->vma = NULL;
 	tlb->max = ARRAY_SIZE(tlb->local);
 	tlb->pages = tlb->local;

arch/arm/kernel/perf_event.c

@@ -53,7 +53,12 @@ armpmu_map_cache_event(const unsigned (*cache_map)
 static int
 armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
 {
-	int mapping = (*event_map)[config];
+	int mapping;
+
+	if (config >= PERF_COUNT_HW_MAX)
+		return -ENOENT;
+
+	mapping = (*event_map)[config];
 	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
 }
 

arch/arm/mach-msm/Kconfig

@@ -121,8 +121,7 @@ config MSM_SMD
 	bool
 
 config MSM_GPIOMUX
-	depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
-	bool "MSM V1 TLMM GPIOMUX architecture"
+	bool
 	help
 	  Support for MSM V1 TLMM GPIOMUX architecture.
 

arch/arm/mach-msm/gpiomux-v1.c

@@ -1,33 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/kernel.h>
-#include "gpiomux.h"
-#include "proc_comm.h"
-
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
-{
-	unsigned tlmm_config  = (val & ~GPIOMUX_CTL_MASK) |
-				((gpio & 0x3ff) << 4);
-	unsigned tlmm_disable = 0;
-	int rc;
-
-	rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
-			   &tlmm_config, &tlmm_disable);
-	if (rc)
-		pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
-		       __func__, rc, tlmm_config, tlmm_disable);
-}

arch/arm/mach-msm/gpiomux.h

@@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
 int msm_gpiomux_write(unsigned gpio,
 		      gpiomux_config_t active,
 		      gpiomux_config_t suspended);
-
-/* Architecture-internal function for use by the framework only.
- * This function can assume the following:
- * - the gpio value has passed a bounds-check
- * - the gpiomux spinlock has been obtained
- *
- * This function is not for public consumption.  External users
- * should use msm_gpiomux_write.
- */
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
 #else
 static inline int msm_gpiomux_write(unsigned gpio,
 				    gpiomux_config_t active,

arch/arm/mach-omap2/dss-common.c

@@ -42,7 +42,7 @@
 
 /* Using generic display panel */
 static struct tfp410_platform_data omap4_dvi_panel = {
-	.i2c_bus_num		= 3,
+	.i2c_bus_num		= 2,
 	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
 };
 

arch/arm/mach-omap2/omap_device.c

@@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	const char *oh_name;
 	int oh_cnt, i, ret = 0;
+	bool device_active = false;
 
 	oh_cnt = of_property_count_strings(node, "ti,hwmods");
 	if (oh_cnt <= 0) {
@@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 			goto odbfd_exit1;
 		}
 		hwmods[i] = oh;
+		if (oh->flags & HWMOD_INIT_NO_IDLE)
+			device_active = true;
 	}
 
 	od = omap_device_alloc(pdev, hwmods, oh_cnt);
@@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 
 	pdev->dev.pm_domain = &omap_device_pm_domain;
 
+	if (device_active) {
+		omap_device_enable(pdev);
+		pm_runtime_set_active(&pdev->dev);
+	}
+
 odbfd_exit1:
 	kfree(hwmods);
 odbfd_exit:
@@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
+	int i;
 
 	if (!od)
 		return 0;
@@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
 	 * If omap_device state is enabled, but has no driver bound,
 	 * idle it.
 	 */
+
+	/*
+	 * Some devices (like memory controllers) are always kept
+	 * enabled, and should not be idled even with no drivers.
+	 */
+	for (i = 0; i < od->hwmods_cnt; i++)
+		if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
+			return 0;
+
 	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
 		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
 			dev_warn(dev, "%s: enabled but no driver.  Idling\n",

arch/arm/mach-omap2/omap_hwmod.c

@@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
 
 		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
 		if (np)
-			va_start = of_iomap(np, 0);
+			va_start = of_iomap(np, oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}

arch/arm/mach-omap2/omap_hwmod.h

@@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 #define MODULEMODE_HWCTRL		1
 #define MODULEMODE_SWCTRL		2
 
+#define DEBUG_OMAP2UART1_FLAGS	0
+#define DEBUG_OMAP2UART2_FLAGS	0
+#define DEBUG_OMAP2UART3_FLAGS	0
+#define DEBUG_OMAP3UART3_FLAGS	0
+#define DEBUG_OMAP3UART4_FLAGS	0
+#define DEBUG_OMAP4UART3_FLAGS	0
+#define DEBUG_OMAP4UART4_FLAGS	0
+#define DEBUG_TI81XXUART1_FLAGS	0
+#define DEBUG_TI81XXUART2_FLAGS	0
+#define DEBUG_TI81XXUART3_FLAGS	0
+#define DEBUG_AM33XXUART1_FLAGS	0
+
+#define DEBUG_OMAPUART_FLAGS	(HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
+
+#if defined(CONFIG_DEBUG_OMAP2UART1)
+#undef DEBUG_OMAP2UART1_FLAGS
+#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART2)
+#undef DEBUG_OMAP2UART2_FLAGS
+#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART3)
+#undef DEBUG_OMAP2UART3_FLAGS
+#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART3)
+#undef DEBUG_OMAP3UART3_FLAGS
+#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART4)
+#undef DEBUG_OMAP3UART4_FLAGS
+#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART3)
+#undef DEBUG_OMAP4UART3_FLAGS
+#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART4)
+#undef DEBUG_OMAP4UART4_FLAGS
+#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART1)
+#undef DEBUG_TI81XXUART1_FLAGS
+#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART2)
+#undef DEBUG_TI81XXUART2_FLAGS
+#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART3)
+#undef DEBUG_TI81XXUART3_FLAGS
+#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_AM33XXUART1)
+#undef DEBUG_AM33XXUART1_FLAGS
+#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#endif
 
 /**
  * struct omap_hwmod_mux_info - hwmod specific mux configuration
@@ -568,6 +616,7 @@ struct omap_hwmod_link {
  * @voltdm: pointer to voltage domain (filled in at runtime)
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
+ * @mpu_rt_idx: index of device address space for register target (for DT boot)
  * @_mpu_rt_va: cached register target start address (internal use)
  * @_mpu_port: cached MPU register target slave (internal use)
  * @opt_clks_cnt: number of @opt_clks
@@ -617,6 +666,7 @@ struct omap_hwmod {
 	struct list_head		node;
 	struct omap_hwmod_ocp_if	*_mpu_port;
 	u16				flags;
+	u8				mpu_rt_idx;
 	u8				response_lat;
 	u8				rst_lines_cnt;
 	u8				opt_clks_cnt;

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = {
 	.clkdm_name	= "cpsw_125mhz_clkdm",
 	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
 	.main_clk	= "cpsw_125mhz_gclk",
+	.mpu_rt_idx	= 1,
 	.prcm		= {
 		.omap4	= {
 			.clkctrl_offs	= AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
@@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
 	.name		= "uart1",
 	.class		= &uart_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
 	.prcm		= {
 		.omap4	= {

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS |
+				HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
@@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
 	.mpu_irqs	= uart4_mpu_irqs,
 	.sdma_reqs	= uart4_sdma_reqs,
 	.main_clk	= "uart4_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
-				HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= DEBUG_OMAP4UART3_FLAGS,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
+	.flags		= DEBUG_OMAP4UART4_FLAGS,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/serial.c

@@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void)
 				pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
 					uart_name, uart->num);
 			}
-
-			/*
-			 * omap-uart can be used for earlyprintk logs
-			 * So if omap-uart is used as console then prevent
-			 * uart reset and idle to get logs from omap-uart
-			 * until uart console driver is available to take
-			 * care for console messages.
-			 * Idling or resetting omap-uart while printing logs
-			 * early boot logs can stall the boot-up.
-			 */
-			oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
 		}
 	} while (1);
 

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -1162,9 +1162,6 @@ static void __init eva_init(void)
 	gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 	gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
-	/* Touchscreen */
-	gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
 	/* GETHER */
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
 

arch/arm/mach-shmobile/board-bockw.c

@@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = {
 				  "usb1", "usb1"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0", "sdhi0"),
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_cd", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_wp", "sdhi0"),
 };
 
 #define FPGA	0x18200000

arch/arm/mach-shmobile/board-lager.c

@@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = {
 #define GPIO_KEY(c, g, d, ...) \
 	{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
 
-static __initdata struct gpio_keys_button gpio_buttons[] = {
+static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_4,		RCAR_GP_PIN(1, 28),	"SW2-pin4"),
 	GPIO_KEY(KEY_3,		RCAR_GP_PIN(1, 26),	"SW2-pin3"),
 	GPIO_KEY(KEY_2,		RCAR_GP_PIN(1, 24),	"SW2-pin2"),

arch/arm/mach-sti/headsmp.S

@@ -16,8 +16,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
-
 /*
  * ST specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm64/include/asm/tlb.h

@@ -35,6 +35,7 @@ struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
 	struct vm_area_struct	*vma;
+	unsigned long		start, end;
 	unsigned long		range_start;
 	unsigned long		range_end;
 	unsigned int		nr;
@@ -97,10 +98,12 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 }
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
-	tlb->fullmm = fullmm;
+	tlb->fullmm = !(start | (end+1));
+	tlb->start = start;
+	tlb->end = end;
 	tlb->vma = NULL;
 	tlb->max = ARRAY_SIZE(tlb->local);
 	tlb->pages = tlb->local;

arch/avr32/boards/atngw100/mrmt.c

@@ -150,7 +150,6 @@ static struct ac97c_platform_data __initdata ac97c0_data = {
 static struct platform_device rmt_ts_device = {
 	.name	= "ucb1400_ts",
 	.id	= -1,
-	}
 };
 #endif
 

arch/hexagon/Kconfig

@@ -158,6 +158,7 @@ source "kernel/Kconfig.hz"
 endmenu
 
 source "init/Kconfig"
+source "kernel/Kconfig.freezer"
 source "drivers/Kconfig"
 source "fs/Kconfig"
 

arch/ia64/include/asm/tlb.h

@@ -22,7 +22,7 @@
  * unmapping a portion of the virtual address space, these hooks are called according to
  * the following template:
  *
- *	tlb <- tlb_gather_mmu(mm, full_mm_flush);	// start unmap for address space MM
+ *	tlb <- tlb_gather_mmu(mm, start, end);		// start unmap for address space MM
  *	{
  *	  for each vma that needs a shootdown do {
  *	    tlb_start_vma(tlb, vma);
@@ -58,6 +58,7 @@ struct mmu_gather {
 	unsigned int		max;
 	unsigned char		fullmm;		/* non-zero means full mm flush */
 	unsigned char		need_flush;	/* really unmapped some PTEs? */
+	unsigned long		start, end;
 	unsigned long		start_addr;
 	unsigned long		end_addr;
 	struct page		**pages;
@@ -155,13 +156,15 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
 
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
 	tlb->max = ARRAY_SIZE(tlb->local);
 	tlb->pages = tlb->local;
 	tlb->nr = 0;
-	tlb->fullmm = full_mm_flush;
+	tlb->fullmm = !(start | (end+1));
+	tlb->start = start;
+	tlb->end = end;
 	tlb->start_addr = ~0UL;
 }
 

arch/microblaze/Kconfig

@@ -28,7 +28,7 @@ config MICROBLAZE
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IDLE_POLL_SETUP
 	select MODULES_USE_ELF_RELA
-	select CLONE_BACKWARDS
+	select CLONE_BACKWARDS3
 
 config SWAP
 	def_bool n

arch/mips/include/asm/cpu-features.h

@@ -17,6 +17,8 @@
 #define current_cpu_type()	current_cpu_data.cputype
 #endif
 
+#define boot_cpu_type()		cpu_data[0].cputype
+
 /*
  * SMP assumption: Options of CPU 0 are a superset of all processors.
  * This is true for all known MIPS systems.

arch/mips/kernel/smp-bmips.c

@@ -66,6 +66,8 @@ static void __init bmips_smp_setup(void)
 	int i, cpu = 1, boot_cpu = 0;
 
 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+	int cpu_hw_intr;
+
 	/* arbitration priority */
 	clear_c0_brcm_cmt_ctrl(0x30);
 
@@ -80,8 +82,12 @@ static void __init bmips_smp_setup(void)
 	 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
 	 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
 	 */
-	change_c0_brcm_cmt_intr(0xf8018000,
-					(0x02 << 27) | (0x03 << 15));
+	if (boot_cpu == 0)
+		cpu_hw_intr = 0x02;
+	else
+		cpu_hw_intr = 0x1d;
+
+	change_c0_brcm_cmt_intr(0xf8018000, (cpu_hw_intr << 27) | (0x03 << 15));
 
 	/* single core, 2 threads (2 pipelines) */
 	max_cpus = 2;

arch/mips/oprofile/op_model_mipsxx.c

@@ -166,7 +166,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr)
 			reg.control[i] |= M_PERFCTL_USER;
 		if (ctr[i].exl)
 			reg.control[i] |= M_PERFCTL_EXL;
-		if (current_cpu_type() == CPU_XLR)
+		if (boot_cpu_type() == CPU_XLR)
 			reg.control[i] |= M_PERFCTL_COUNT_ALL_THREADS;
 		reg.counter[i] = 0x80000000 - ctr[i].count;
 	}

arch/mips/pnx833x/common/platform.c

@@ -206,11 +206,13 @@ static struct resource pnx833x_ethernet_resources[] = {
 		.end   = PNX8335_IP3902_PORTS_END,
 		.flags = IORESOURCE_MEM,
 	},
+#ifdef CONFIG_SOC_PNX8335
 	[1] = {
 		.start = PNX8335_PIC_ETHERNET_INT,
 		.end   = PNX8335_PIC_ETHERNET_INT,
 		.flags = IORESOURCE_IRQ,
 	},
+#endif
 };
 
 static struct platform_device pnx833x_ethernet_device = {

arch/openrisc/Kconfig

@@ -55,6 +55,7 @@ config GENERIC_CSUM
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
 
 menu "Processor type and features"
 

arch/powerpc/Kconfig

@@ -566,7 +566,7 @@ config SCHED_SMT
 config PPC_DENORMALISATION
 	bool "PowerPC denormalisation exception handling"
 	depends on PPC_BOOK3S_64
-	default "n"
+	default "y" if PPC_POWERNV
 	---help---
 	  Add support for handling denormalisation of single precision
 	  values.  Useful for bare metal only.  If unsure say Y here.

arch/powerpc/include/asm/processor.h

@@ -247,6 +247,10 @@ struct thread_struct {
 	unsigned long	tm_orig_msr;	/* Thread's MSR on ctx switch */
 	struct pt_regs	ckpt_regs;	/* Checkpointed registers */
 
+	unsigned long	tm_tar;
+	unsigned long	tm_ppr;
+	unsigned long	tm_dscr;
+
 	/*
 	 * Transactional FP and VSX 0-31 register set.
 	 * NOTE: the sense of these is the opposite of the integer ckpt_regs!

arch/powerpc/include/asm/reg.h

@@ -254,19 +254,28 @@
 #define SPRN_HRMOR	0x139	/* Real mode offset register */
 #define SPRN_HSRR0	0x13A	/* Hypervisor Save/Restore 0 */
 #define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
+/* HFSCR and FSCR bit numbers are the same */
+#define FSCR_TAR_LG	8	/* Enable Target Address Register */
+#define FSCR_EBB_LG	7	/* Enable Event Based Branching */
+#define FSCR_TM_LG	5	/* Enable Transactional Memory */
+#define FSCR_PM_LG	4	/* Enable prob/priv access to PMU SPRs */
+#define FSCR_BHRB_LG	3	/* Enable Branch History Rolling Buffer*/
+#define FSCR_DSCR_LG	2	/* Enable Data Stream Control Register */
+#define FSCR_VECVSX_LG	1	/* Enable VMX/VSX  */
+#define FSCR_FP_LG	0	/* Enable Floating Point */
 #define SPRN_FSCR	0x099	/* Facility Status & Control Register */
-#define   FSCR_TAR	(1 << (63-55)) /* Enable Target Address Register */
-#define   FSCR_EBB	(1 << (63-56)) /* Enable Event Based Branching */
-#define   FSCR_DSCR	(1 << (63-61)) /* Enable Data Stream Control Register */
+#define   FSCR_TAR	__MASK(FSCR_TAR_LG)
+#define   FSCR_EBB	__MASK(FSCR_EBB_LG)
+#define   FSCR_DSCR	__MASK(FSCR_DSCR_LG)
 #define SPRN_HFSCR	0xbe	/* HV=1 Facility Status & Control Register */
-#define   HFSCR_TAR	(1 << (63-55)) /* Enable Target Address Register */
-#define   HFSCR_EBB	(1 << (63-56)) /* Enable Event Based Branching */
-#define   HFSCR_TM	(1 << (63-58)) /* Enable Transactional Memory */
-#define   HFSCR_PM	(1 << (63-60)) /* Enable prob/priv access to PMU SPRs */
-#define   HFSCR_BHRB	(1 << (63-59)) /* Enable Branch History Rolling Buffer*/
-#define   HFSCR_DSCR	(1 << (63-61)) /* Enable Data Stream Control Register */
-#define   HFSCR_VECVSX	(1 << (63-62)) /* Enable VMX/VSX  */
-#define   HFSCR_FP	(1 << (63-63)) /* Enable Floating Point */
+#define   HFSCR_TAR	__MASK(FSCR_TAR_LG)
+#define   HFSCR_EBB	__MASK(FSCR_EBB_LG)
+#define   HFSCR_TM	__MASK(FSCR_TM_LG)
+#define   HFSCR_PM	__MASK(FSCR_PM_LG)
+#define   HFSCR_BHRB	__MASK(FSCR_BHRB_LG)
+#define   HFSCR_DSCR	__MASK(FSCR_DSCR_LG)
+#define   HFSCR_VECVSX	__MASK(FSCR_VECVSX_LG)
+#define   HFSCR_FP	__MASK(FSCR_FP_LG)
 #define SPRN_TAR	0x32f	/* Target Address Register */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
 #define   LPCR_VPM0	(1ul << (63-0))

arch/powerpc/include/asm/switch_to.h

@@ -15,6 +15,15 @@ extern struct task_struct *__switch_to(struct task_struct *,
 struct thread_struct;
 extern struct task_struct *_switch(struct thread_struct *prev,
 				   struct thread_struct *next);
+#ifdef CONFIG_PPC_BOOK3S_64
+static inline void save_tar(struct thread_struct *prev)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_207S))
+		prev->tar = mfspr(SPRN_TAR);
+}
+#else
+static inline void save_tar(struct thread_struct *prev) {}
+#endif
 
 extern void giveup_fpu(struct task_struct *);
 extern void load_up_fpu(void);

arch/powerpc/kernel/asm-offsets.c

@@ -138,6 +138,9 @@ int main(void)
 	DEFINE(THREAD_TM_TFHAR, offsetof(struct thread_struct, tm_tfhar));
 	DEFINE(THREAD_TM_TEXASR, offsetof(struct thread_struct, tm_texasr));
 	DEFINE(THREAD_TM_TFIAR, offsetof(struct thread_struct, tm_tfiar));
+	DEFINE(THREAD_TM_TAR, offsetof(struct thread_struct, tm_tar));
+	DEFINE(THREAD_TM_PPR, offsetof(struct thread_struct, tm_ppr));
+	DEFINE(THREAD_TM_DSCR, offsetof(struct thread_struct, tm_dscr));
 	DEFINE(PT_CKPT_REGS, offsetof(struct thread_struct, ckpt_regs));
 	DEFINE(THREAD_TRANSACT_VR0, offsetof(struct thread_struct,
 					 transact_vr[0]));

arch/powerpc/kernel/eeh.c

@@ -1061,7 +1061,7 @@ static const struct file_operations proc_eeh_operations = {
 
 static int __init eeh_init_proc(void)
 {
-	if (machine_is(pseries))
+	if (machine_is(pseries) || machine_is(powernv))
 		proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
 	return 0;
 }

arch/powerpc/kernel/entry_64.S

@@ -449,15 +449,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 
 #ifdef CONFIG_PPC_BOOK3S_64
 BEGIN_FTR_SECTION
-	/*
-	 * Back up the TAR across context switches.  Note that the TAR is not
-	 * available for use in the kernel.  (To provide this, the TAR should
-	 * be backed up/restored on exception entry/exit instead, and be in
-	 * pt_regs.  FIXME, this should be in pt_regs anyway (for debug).)
-	 */
-	mfspr	r0,SPRN_TAR
-	std	r0,THREAD_TAR(r3)
-
 	/* Event based branch registers */
 	mfspr	r0, SPRN_BESCR
 	std	r0, THREAD_BESCR(r3)
@@ -584,9 +575,34 @@ BEGIN_FTR_SECTION
 	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
 	cmpwi	r6,0
+	li	r8, FSCR_DSCR
 	bne	1f
 	ld	r0,0(r7)
-1:	cmpd	r0,r25
+	b	3f
+1:
+  BEGIN_FTR_SECTION_NESTED(70)
+	mfspr	r6, SPRN_FSCR
+	or	r6, r6, r8
+	mtspr	SPRN_FSCR, r6
+    BEGIN_FTR_SECTION_NESTED(69)
+	mfspr	r6, SPRN_HFSCR
+	or	r6, r6, r8
+	mtspr	SPRN_HFSCR, r6
+    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
+	b	4f
+  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+3:
+  BEGIN_FTR_SECTION_NESTED(70)
+	mfspr	r6, SPRN_FSCR
+	andc	r6, r6, r8
+	mtspr	SPRN_FSCR, r6
+    BEGIN_FTR_SECTION_NESTED(69)
+	mfspr	r6, SPRN_HFSCR
+	andc	r6, r6, r8
+	mtspr	SPRN_HFSCR, r6
+    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
+  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+4:	cmpd	r0,r25
 	beq	2f
 	mtspr	SPRN_DSCR,r0
 2:

arch/powerpc/kernel/exceptions-64s.S

@@ -848,7 +848,7 @@ hv_facility_unavailable_relon_trampoline:
 	. = 0x4f80
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	facility_unavailable_relon_hv
+	b	hv_facility_unavailable_relon_hv
 
 	STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
 #ifdef CONFIG_PPC_DENORMALISATION
@@ -1175,6 +1175,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	b	.ret_from_except
 
 	STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
+	STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
 
 	.align	7
 	.globl	__end_handlers
@@ -1188,7 +1189,7 @@ __end_handlers:
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
-	STD_RELON_EXCEPTION_HV_OOL(0xf80, facility_unavailable)
+	STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable)
 
 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*

arch/powerpc/kernel/process.c

@@ -600,6 +600,16 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	struct ppc64_tlb_batch *batch;
 #endif
 
+	/* Back up the TAR across context switches.
+	 * Note that the TAR is not available for use in the kernel.  (To
+	 * provide this, the TAR should be backed up/restored on exception
+	 * entry/exit instead, and be in pt_regs.  FIXME, this should be in
+	 * pt_regs anyway (for debug).)
+	 * Save the TAR here before we do treclaim/trecheckpoint as these
+	 * will change the TAR.
+	 */
+	save_tar(&prev->thread);
+
 	__switch_to_tm(prev);
 
 #ifdef CONFIG_SMP

arch/powerpc/kernel/tm.S

@@ -233,6 +233,16 @@ dont_backup_fp:
 	std	r5, _CCR(r7)
 	std	r6, _XER(r7)
 
+
+	/* ******************** TAR, PPR, DSCR ********** */
+	mfspr	r3, SPRN_TAR
+	mfspr	r4, SPRN_PPR
+	mfspr	r5, SPRN_DSCR
+
+	std	r3, THREAD_TM_TAR(r12)
+	std	r4, THREAD_TM_PPR(r12)
+	std	r5, THREAD_TM_DSCR(r12)
+
 	/* MSR and flags:  We don't change CRs, and we don't need to alter
 	 * MSR.
 	 */
@@ -347,6 +357,16 @@ dont_restore_fp:
 	mtmsr	r6				/* FP/Vec off again! */
 
 restore_gprs:
+
+	/* ******************** TAR, PPR, DSCR ********** */
+	ld	r4, THREAD_TM_TAR(r3)
+	ld	r5, THREAD_TM_PPR(r3)
+	ld	r6, THREAD_TM_DSCR(r3)
+
+	mtspr	SPRN_TAR,	r4
+	mtspr	SPRN_PPR,	r5
+	mtspr	SPRN_DSCR,	r6
+
 	/* ******************** CR,LR,CCR,MSR ********** */
 	ld	r3, _CTR(r7)
 	ld	r4, _LINK(r7)

arch/powerpc/kernel/traps.c

@@ -44,9 +44,7 @@
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include <asm/pmc.h>
-#ifdef CONFIG_PPC32
 #include <asm/reg.h>
-#endif
 #ifdef CONFIG_PMAC_BACKLIGHT
 #include <asm/backlight.h>
 #endif
@@ -1296,43 +1294,54 @@ void vsx_unavailable_exception(struct pt_regs *regs)
 	die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
 }
 
+#ifdef CONFIG_PPC64
 void facility_unavailable_exception(struct pt_regs *regs)
 {
 	static char *facility_strings[] = {
-		"FPU",
-		"VMX/VSX",
-		"DSCR",
-		"PMU SPRs",
-		"BHRB",
-		"TM",
-		"AT",
-		"EBB",
-		"TAR",
+		[FSCR_FP_LG] = "FPU",
+		[FSCR_VECVSX_LG] = "VMX/VSX",
+		[FSCR_DSCR_LG] = "DSCR",
+		[FSCR_PM_LG] = "PMU SPRs",
+		[FSCR_BHRB_LG] = "BHRB",
+		[FSCR_TM_LG] = "TM",
+		[FSCR_EBB_LG] = "EBB",
+		[FSCR_TAR_LG] = "TAR",
 	};
-	char *facility, *prefix;
+	char *facility = "unknown";
 	u64 value;
+	u8 status;
+	bool hv;
 
-	if (regs->trap == 0xf60) {
-		value = mfspr(SPRN_FSCR);
-		prefix = "";
-	} else {
+	hv = (regs->trap == 0xf80);
+	if (hv)
 		value = mfspr(SPRN_HFSCR);
-		prefix = "Hypervisor ";
+	else
+		value = mfspr(SPRN_FSCR);
+
+	status = value >> 56;
+	if (status == FSCR_DSCR_LG) {
+		/* User is acessing the DSCR.  Set the inherit bit and allow
+		 * the user to set it directly in future by setting via the
+		 * H/FSCR DSCR bit.
+		 */
+		current->thread.dscr_inherit = 1;
+		if (hv)
+			mtspr(SPRN_HFSCR, value | HFSCR_DSCR);
+		else
+			mtspr(SPRN_FSCR,  value | FSCR_DSCR);
+		return;
 	}
 
-	value = value >> 56;
+	if ((status < ARRAY_SIZE(facility_strings)) &&
+	    facility_strings[status])
+		facility = facility_strings[status];
 
 	/* We restore the interrupt state now */
 	if (!arch_irq_disabled_regs(regs))
 		local_irq_enable();
 
-	if (value < ARRAY_SIZE(facility_strings))
-		facility = facility_strings[value];
-	else
-		facility = "unknown";
-
 	pr_err("%sFacility '%s' unavailable, exception at 0x%lx, MSR=%lx\n",
-		prefix, facility, regs->nip, regs->msr);
+	       hv ? "Hypervisor " : "", facility, regs->nip, regs->msr);
 
 	if (user_mode(regs)) {
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
@@ -1341,6 +1350,7 @@ void facility_unavailable_exception(struct pt_regs *regs)
 
 	die("Unexpected facility unavailable exception", regs, SIGABRT);
 }
+#endif
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 

arch/powerpc/kvm/book3s_hv.c

@@ -1809,7 +1809,7 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 		rma_size <<= PAGE_SHIFT;
 		rmls = lpcr_rmls(rma_size);
 		err = -EINVAL;
-		if (rmls < 0) {
+		if ((long)rmls < 0) {
 			pr_err("KVM: Can't use RMA of 0x%lx bytes\n", rma_size);
 			goto out_srcu;
 		}
@@ -1874,7 +1874,7 @@ int kvmppc_core_init_vm(struct kvm *kvm)
 	/* Allocate the guest's logical partition ID */
 
 	lpid = kvmppc_alloc_lpid();
-	if (lpid < 0)
+	if ((long)lpid < 0)
 		return -ENOMEM;
 	kvm->arch.lpid = lpid;
 

arch/powerpc/kvm/book3s_pr.c

@@ -1047,11 +1047,12 @@ struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
 	if (err)
 		goto free_shadow_vcpu;
 
+	err = -ENOMEM;
 	p = __get_free_page(GFP_KERNEL|__GFP_ZERO);
-	/* the real shared page fills the last 4k of our page */
-	vcpu->arch.shared = (void*)(p + PAGE_SIZE - 4096);
 	if (!p)
 		goto uninit_vcpu;
+	/* the real shared page fills the last 4k of our page */
+	vcpu->arch.shared = (void *)(p + PAGE_SIZE - 4096);
 
 #ifdef CONFIG_PPC_BOOK3S_64
 	/* default to book3s_64 (970fx) */

arch/powerpc/platforms/pseries/nvram.c

@@ -569,35 +569,6 @@ error:
 	return ret;
 }
 
-static int unzip_oops(char *oops_buf, char *big_buf)
-{
-	struct oops_log_info *oops_hdr = (struct oops_log_info *)oops_buf;
-	u64 timestamp = oops_hdr->timestamp;
-	char *big_oops_data = NULL;
-	char *oops_data_buf = NULL;
-	size_t big_oops_data_sz;
-	int unzipped_len;
-
-	big_oops_data = big_buf + sizeof(struct oops_log_info);
-	big_oops_data_sz = big_oops_buf_sz - sizeof(struct oops_log_info);
-	oops_data_buf = oops_buf + sizeof(struct oops_log_info);
-
-	unzipped_len = nvram_decompress(oops_data_buf, big_oops_data,
-					oops_hdr->report_length,
-					big_oops_data_sz);
-
-	if (unzipped_len < 0) {
-		pr_err("nvram: decompression failed; returned %d\n",
-								unzipped_len);
-		return -1;
-	}
-	oops_hdr = (struct oops_log_info *)big_buf;
-	oops_hdr->version = OOPS_HDR_VERSION;
-	oops_hdr->report_length = (u16) unzipped_len;
-	oops_hdr->timestamp = timestamp;
-	return 0;
-}
-
 static int nvram_pstore_open(struct pstore_info *psi)
 {
 	/* Reset the iterator to start reading partitions again */
@@ -685,10 +656,9 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type,
 	unsigned int err_type, id_no, size = 0;
 	struct nvram_os_partition *part = NULL;
 	char *buff = NULL, *big_buff = NULL;
-	int rc, sig = 0;
+	int sig = 0;
 	loff_t p;
 
-read_partition:
 	read_type++;
 
 	switch (nvram_type_ids[read_type]) {
@@ -749,30 +719,46 @@ read_partition:
 		*id = id_no;
 
 	if (nvram_type_ids[read_type] == PSTORE_TYPE_DMESG) {
+		int length, unzipped_len;
+		size_t hdr_size;
+
 		oops_hdr = (struct oops_log_info *)buff;
-		*buf = buff + sizeof(*oops_hdr);
+		if (oops_hdr->version < OOPS_HDR_VERSION) {
+			/* Old format oops header had 2-byte record size */
+			hdr_size = sizeof(u16);
+			length = oops_hdr->version;
+			time->tv_sec = 0;
+			time->tv_nsec = 0;
+		} else {
+			hdr_size = sizeof(*oops_hdr);
+			length = oops_hdr->report_length;
+			time->tv_sec = oops_hdr->timestamp;
+			time->tv_nsec = 0;
+		}
+		*buf = kmalloc(length, GFP_KERNEL);
+		if (*buf == NULL)
+			return -ENOMEM;
+		memcpy(*buf, buff + hdr_size, length);
+		kfree(buff);
 
 		if (err_type == ERR_TYPE_KERNEL_PANIC_GZ) {
 			big_buff = kmalloc(big_oops_buf_sz, GFP_KERNEL);
 			if (!big_buff)
 				return -ENOMEM;
 
-			rc = unzip_oops(buff, big_buff);
+			unzipped_len = nvram_decompress(*buf, big_buff,
+						length, big_oops_buf_sz);
 
-			if (rc != 0) {
-				kfree(buff);
+			if (unzipped_len < 0) {
+				pr_err("nvram: decompression failed, returned "
+					"rc %d\n", unzipped_len);
 				kfree(big_buff);
-				goto read_partition;
+			} else {
+				*buf = big_buff;
+				length = unzipped_len;
 			}
-
-			oops_hdr = (struct oops_log_info *)big_buff;
-			*buf = big_buff + sizeof(*oops_hdr);
-			kfree(buff);
 		}
-
-		time->tv_sec = oops_hdr->timestamp;
-		time->tv_nsec = 0;
-		return oops_hdr->report_length;
+		return length;
 	}
 
 	*buf = buff;
@@ -816,6 +802,7 @@ static int nvram_pstore_init(void)
 static void __init nvram_init_oops_partition(int rtas_partition_exists)
 {
 	int rc;
+	size_t size;
 
 	rc = pseries_nvram_init_os_partition(&oops_log_partition);
 	if (rc != 0) {
@@ -844,8 +831,9 @@ static void __init nvram_init_oops_partition(int rtas_partition_exists)
 	big_oops_buf_sz = (oops_data_sz * 100) / 45;
 	big_oops_buf = kmalloc(big_oops_buf_sz, GFP_KERNEL);
 	if (big_oops_buf) {
-		stream.workspace = kmalloc(zlib_deflate_workspacesize(
-				WINDOW_BITS, MEM_LEVEL), GFP_KERNEL);
+		size = max(zlib_deflate_workspacesize(WINDOW_BITS, MEM_LEVEL),
+			zlib_inflate_workspacesize());
+		stream.workspace = kmalloc(size, GFP_KERNEL);
 		if (!stream.workspace) {
 			pr_err("nvram: No memory for compression workspace; "
 				"skipping compression of %s partition data\n",

arch/s390/Kconfig

@@ -118,6 +118,7 @@ config S390
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZ4
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
@@ -227,11 +228,12 @@ config MARCH_Z196
 	  not work on older machines.
 
 config MARCH_ZEC12
-	bool "IBM zEC12"
+	bool "IBM zBC12 and zEC12"
 	select HAVE_MARCH_ZEC12_FEATURES if 64BIT
 	help
-	  Select this to enable optimizations for IBM zEC12 (2827 series). The
-	  kernel will be slightly faster but will not work on older machines.
+	  Select this to enable optimizations for IBM zBC12 and zEC12 (2828 and
+	  2827 series). The kernel will be slightly faster but will not work on
+	  older machines.
 
 endchoice
 
@@ -709,6 +711,7 @@ config S390_GUEST
 	def_bool y
 	prompt "s390 support for virtio devices"
 	depends on 64BIT
+	select TTY
 	select VIRTUALIZATION
 	select VIRTIO
 	select VIRTIO_CONSOLE

arch/s390/boot/compressed/Makefile

@@ -6,9 +6,9 @@
 
 BITS := $(if $(CONFIG_64BIT),64,31)
 
-targets	:= vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
-	   vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo misc.o piggy.o \
-	   sizes.h head$(BITS).o
+targets	:= vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2
+targets += vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.lz4
+targets += misc.o piggy.o sizes.h head$(BITS).o
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
@@ -48,6 +48,7 @@ vmlinux.bin.all-y := $(obj)/vmlinux.bin
 
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZ4)  := lz4
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
 suffix-$(CONFIG_KERNEL_LZO)  := lzo
 suffix-$(CONFIG_KERNEL_XZ)  := xz
@@ -56,6 +57,8 @@ $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y)
 	$(call if_changed,gzip)
 $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y)
 	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y)
+	$(call if_changed,lz4)
 $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y)
 	$(call if_changed,lzma)
 $(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y)

arch/s390/boot/compressed/misc.c

@@ -47,6 +47,10 @@ static unsigned long free_mem_end_ptr;
 #include "../../../../lib/decompress_bunzip2.c"
 #endif
 
+#ifdef CONFIG_KERNEL_LZ4
+#include "../../../../lib/decompress_unlz4.c"
+#endif
+
 #ifdef CONFIG_KERNEL_LZMA
 #include "../../../../lib/decompress_unlzma.c"
 #endif

arch/s390/include/asm/bitops.h

@@ -693,7 +693,7 @@ static inline int find_next_bit_left(const unsigned long *addr,
 	size -= offset;
 	p = addr + offset / BITS_PER_LONG;
 	if (bit) {
-		set = __flo_word(0, *p & (~0UL << bit));
+		set = __flo_word(0, *p & (~0UL >> bit));
 		if (set >= size)
 			return size + offset;
 		if (set < BITS_PER_LONG)

arch/s390/include/asm/tlb.h

@@ -32,6 +32,7 @@ struct mmu_gather {
 	struct mm_struct *mm;
 	struct mmu_table_batch *batch;
 	unsigned int fullmm;
+	unsigned long start, unsigned long end;
 };
 
 struct mmu_table_batch {
@@ -48,10 +49,13 @@ extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
 
 static inline void tlb_gather_mmu(struct mmu_gather *tlb,
 				  struct mm_struct *mm,
-				  unsigned int full_mm_flush)
+				  unsigned long start,
+				  unsigned long end)
 {
 	tlb->mm = mm;
-	tlb->fullmm = full_mm_flush;
+	tlb->start = start;
+	tlb->end = end;
+	tlb->fullmm = !(start | (end+1));
 	tlb->batch = NULL;
 	if (tlb->fullmm)
 		__tlb_flush_mm(mm);

arch/s390/kernel/perf_event.c

@@ -52,12 +52,13 @@ static struct kvm_s390_sie_block *sie_block(struct pt_regs *regs)
 
 static bool is_in_guest(struct pt_regs *regs)
 {
-	unsigned long ip = instruction_pointer(regs);
-
 	if (user_mode(regs))
 		return false;
-
-	return ip == (unsigned long) &sie_exit;
+#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
+	return instruction_pointer(regs) == (unsigned long) &sie_exit;
+#else
+	return false;
+#endif
 }
 
 static unsigned long guest_is_user_mode(struct pt_regs *regs)

arch/s390/kernel/setup.c

@@ -994,6 +994,7 @@ static void __init setup_hwcaps(void)
 		strcpy(elf_platform, "z196");
 		break;
 	case 0x2827:
+	case 0x2828:
 		strcpy(elf_platform, "zEC12");
 		break;
 	}

arch/s390/kvm/kvm-s390.c

@@ -702,14 +702,25 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 		return rc;
 
 	vcpu->arch.sie_block->icptcode = 0;
-	preempt_disable();
-	kvm_guest_enter();
-	preempt_enable();
 	VCPU_EVENT(vcpu, 6, "entering sie flags %x",
 		   atomic_read(&vcpu->arch.sie_block->cpuflags));
 	trace_kvm_s390_sie_enter(vcpu,
 				 atomic_read(&vcpu->arch.sie_block->cpuflags));
+
+	/*
+	 * As PF_VCPU will be used in fault handler, between guest_enter
+	 * and guest_exit should be no uaccess.
+	 */
+	preempt_disable();
+	kvm_guest_enter();
+	preempt_enable();
 	rc = sie64a(vcpu->arch.sie_block, vcpu->run->s.regs.gprs);
+	kvm_guest_exit();
+
+	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
+		   vcpu->arch.sie_block->icptcode);
+	trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
+
 	if (rc > 0)
 		rc = 0;
 	if (rc < 0) {
@@ -721,10 +732,6 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 			rc = kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
 		}
 	}
-	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
-		   vcpu->arch.sie_block->icptcode);
-	trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
-	kvm_guest_exit();
 
 	memcpy(&vcpu->run->s.regs.gprs[14], &vcpu->arch.sie_block->gg14, 16);
 	return rc;

arch/s390/kvm/priv.c

@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/compat.h>
 #include <asm/asm-offsets.h>
+#include <asm/facility.h>
 #include <asm/current.h>
 #include <asm/debug.h>
 #include <asm/ebcdic.h>
@@ -532,8 +533,7 @@ static int handle_pfmf(struct kvm_vcpu *vcpu)
 		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
 
 	/* Only provide non-quiescing support if the host supports it */
-	if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ &&
-	    S390_lowcore.stfl_fac_list & 0x00020000)
+	if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ && !test_facility(14))
 		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
 
 	/* No support for conditional-SSKE */

arch/s390/mm/init.c

@@ -69,6 +69,7 @@ static void __init setup_zero_pages(void)
 		order = 2;
 		break;
 	case 0x2827:	/* zEC12 */
+	case 0x2828:	/* zEC12 */
 	default:
 		order = 5;
 		break;

arch/s390/oprofile/init.c

@@ -440,7 +440,7 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops)
 		switch (id.machine) {
 		case 0x2097: case 0x2098: ops->cpu_type = "s390/z10"; break;
 		case 0x2817: case 0x2818: ops->cpu_type = "s390/z196"; break;
-		case 0x2827:              ops->cpu_type = "s390/zEC12"; break;
+		case 0x2827: case 0x2828: ops->cpu_type = "s390/zEC12"; break;
 		default: return -ENODEV;
 		}
 	}

arch/score/Kconfig

@@ -87,6 +87,8 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 config MMU
 	def_bool y
 

arch/sh/include/asm/tlb.h

@@ -36,10 +36,12 @@ static inline void init_tlb_gather(struct mmu_gather *tlb)
 }
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
-	tlb->fullmm = full_mm_flush;
+	tlb->start = start;
+	tlb->end = end;
+	tlb->fullmm = !(start | (end+1));
 
 	init_tlb_gather(tlb);
 }

arch/um/include/asm/tlb.h

@@ -45,10 +45,12 @@ static inline void init_tlb_gather(struct mmu_gather *tlb)
 }
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
-	tlb->fullmm = full_mm_flush;
+	tlb->start = start;
+	tlb->end = end;
+	tlb->fullmm = !(start | (end+1));
 
 	init_tlb_gather(tlb);
 }

arch/x86/boot/compressed/eboot.c

@@ -225,7 +225,7 @@ static void low_free(unsigned long size, unsigned long addr)
 	unsigned long nr_pages;
 
 	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
-	efi_call_phys2(sys_table->boottime->free_pages, addr, size);
+	efi_call_phys2(sys_table->boottime->free_pages, addr, nr_pages);
 }
 
 static void find_bits(unsigned long mask, u8 *pos, u8 *size)

arch/x86/include/asm/pgtable-2level.h

@@ -55,9 +55,53 @@ static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp)
 #define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp)
 #endif
 
+#ifdef CONFIG_MEM_SOFT_DIRTY
+
+/*
+ * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE, _PAGE_BIT_SOFT_DIRTY and
+ * _PAGE_BIT_PROTNONE are taken, split up the 28 bits of offset
+ * into this range.
+ */
+#define PTE_FILE_MAX_BITS	28
+#define PTE_FILE_SHIFT1		(_PAGE_BIT_PRESENT + 1)
+#define PTE_FILE_SHIFT2		(_PAGE_BIT_FILE + 1)
+#define PTE_FILE_SHIFT3		(_PAGE_BIT_PROTNONE + 1)
+#define PTE_FILE_SHIFT4		(_PAGE_BIT_SOFT_DIRTY + 1)
+#define PTE_FILE_BITS1		(PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1)
+#define PTE_FILE_BITS2		(PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1)
+#define PTE_FILE_BITS3		(PTE_FILE_SHIFT4 - PTE_FILE_SHIFT3 - 1)
+
+#define pte_to_pgoff(pte)						\
+	((((pte).pte_low >> (PTE_FILE_SHIFT1))				\
+	  & ((1U << PTE_FILE_BITS1) - 1)))				\
+	+ ((((pte).pte_low >> (PTE_FILE_SHIFT2))			\
+	    & ((1U << PTE_FILE_BITS2) - 1))				\
+	   << (PTE_FILE_BITS1))						\
+	+ ((((pte).pte_low >> (PTE_FILE_SHIFT3))			\
+	    & ((1U << PTE_FILE_BITS3) - 1))				\
+	   << (PTE_FILE_BITS1 + PTE_FILE_BITS2))			\
+	+ ((((pte).pte_low >> (PTE_FILE_SHIFT4)))			\
+	    << (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))
+
+#define pgoff_to_pte(off)						\
+	((pte_t) { .pte_low =						\
+	 ((((off)) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1)	\
+	 + ((((off) >> PTE_FILE_BITS1)					\
+	     & ((1U << PTE_FILE_BITS2) - 1))				\
+	    << PTE_FILE_SHIFT2)						\
+	 + ((((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2))		\
+	     & ((1U << PTE_FILE_BITS3) - 1))				\
+	    << PTE_FILE_SHIFT3)						\
+	 + ((((off) >>							\
+	      (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3)))	\
+	    << PTE_FILE_SHIFT4)						\
+	 + _PAGE_FILE })
+
+#else /* CONFIG_MEM_SOFT_DIRTY */
+
 /*
  * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken,
- * split up the 29 bits of offset into this range:
+ * split up the 29 bits of offset into this range.
  */
 #define PTE_FILE_MAX_BITS	29
 #define PTE_FILE_SHIFT1		(_PAGE_BIT_PRESENT + 1)
@@ -88,6 +132,8 @@ static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp)
 	    << PTE_FILE_SHIFT3)						\
 	 + _PAGE_FILE })
 
+#endif /* CONFIG_MEM_SOFT_DIRTY */
+
 /* Encode and de-code a swap entry */
 #if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
 #define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)

arch/x86/include/asm/pgtable-3level.h

@@ -179,6 +179,9 @@ static inline pmd_t native_pmdp_get_and_clear(pmd_t *pmdp)
 /*
  * Bits 0, 6 and 7 are taken in the low part of the pte,
  * put the 32 bits of offset into the high part.
+ *
+ * For soft-dirty tracking 11 bit is taken from
+ * the low part of pte as well.
  */
 #define pte_to_pgoff(pte) ((pte).pte_high)
 #define pgoff_to_pte(off)						\

arch/x86/include/asm/pgtable.h

@@ -314,6 +314,36 @@ static inline pmd_t pmd_mksoft_dirty(pmd_t pmd)
 	return pmd_set_flags(pmd, _PAGE_SOFT_DIRTY);
 }
 
+static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
+{
+	return pte_set_flags(pte, _PAGE_SWP_SOFT_DIRTY);
+}
+
+static inline int pte_swp_soft_dirty(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_SWP_SOFT_DIRTY;
+}
+
+static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
+{
+	return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY);
+}
+
+static inline pte_t pte_file_clear_soft_dirty(pte_t pte)
+{
+	return pte_clear_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_file_mksoft_dirty(pte_t pte)
+{
+	return pte_set_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline int pte_file_soft_dirty(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_SOFT_DIRTY;
+}
+
 /*
  * Mask out unsupported bits in a present pgprot.  Non-present pgprots
  * can use those bits for other purposes, so leave them be.

arch/x86/include/asm/pgtable_types.h

@@ -61,12 +61,27 @@
  * they do not conflict with each other.
  */
 
+#define _PAGE_BIT_SOFT_DIRTY	_PAGE_BIT_HIDDEN
+
 #ifdef CONFIG_MEM_SOFT_DIRTY
-#define _PAGE_SOFT_DIRTY	(_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
+#define _PAGE_SOFT_DIRTY	(_AT(pteval_t, 1) << _PAGE_BIT_SOFT_DIRTY)
 #else
 #define _PAGE_SOFT_DIRTY	(_AT(pteval_t, 0))
 #endif
 
+/*
+ * Tracking soft dirty bit when a page goes to a swap is tricky.
+ * We need a bit which can be stored in pte _and_ not conflict
+ * with swap entry format. On x86 bits 6 and 7 are *not* involved
+ * into swap entry computation, but bit 6 is used for nonlinear
+ * file mapping, so we borrow bit 7 for soft dirty tracking.
+ */
+#ifdef CONFIG_MEM_SOFT_DIRTY
+#define _PAGE_SWP_SOFT_DIRTY	_PAGE_PSE
+#else
+#define _PAGE_SWP_SOFT_DIRTY	(_AT(pteval_t, 0))
+#endif
+
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 #define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
 #else

arch/x86/include/asm/spinlock.h

@@ -233,8 +233,4 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
 #define arch_read_relax(lock)	cpu_relax()
 #define arch_write_relax(lock)	cpu_relax()
 
-/* The {read|write|spin}_lock() on x86 are full memory barriers. */
-static inline void smp_mb__after_lock(void) { }
-#define ARCH_HAS_SMP_MB_AFTER_LOCK
-
 #endif /* _ASM_X86_SPINLOCK_H */

arch/x86/kernel/cpu/perf_event_intel.c

@@ -2270,6 +2270,7 @@ __init int intel_pmu_init(void)
 	case 70:
 	case 71:
 	case 63:
+	case 69:
 		x86_pmu.late_ack = true;
 		memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));

arch/x86/kernel/cpu/perf_event_intel_uncore.c

@@ -314,8 +314,8 @@ static struct uncore_event_desc snbep_uncore_imc_events[] = {
 static struct uncore_event_desc snbep_uncore_qpi_events[] = {
 	INTEL_UNCORE_EVENT_DESC(clockticks,       "event=0x14"),
 	INTEL_UNCORE_EVENT_DESC(txl_flits_active, "event=0x00,umask=0x06"),
-	INTEL_UNCORE_EVENT_DESC(drs_data,         "event=0x02,umask=0x08"),
-	INTEL_UNCORE_EVENT_DESC(ncb_data,         "event=0x03,umask=0x04"),
+	INTEL_UNCORE_EVENT_DESC(drs_data,         "event=0x102,umask=0x08"),
+	INTEL_UNCORE_EVENT_DESC(ncb_data,         "event=0x103,umask=0x04"),
 	{ /* end: all zeroes */ },
 };
 

arch/x86/kernel/early-quirks.c

@@ -196,15 +196,23 @@ static void __init ati_bugs_contd(int num, int slot, int func)
 static void __init intel_remapping_check(int num, int slot, int func)
 {
 	u8 revision;
+	u16 device;
 
+	device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
 	revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID);
 
 	/*
-	 * Revision 0x13 of this chipset supports irq remapping
-	 * but has an erratum that breaks its behavior, flag it as such
+ 	 * Revision 13 of all triggering devices id in this quirk have
+	 * a problem draining interrupts when irq remapping is enabled,
+	 * and should be flagged as broken.  Additionally revisions 0x12
+	 * and 0x22 of device id 0x3405 has this problem.
 	 */
 	if (revision == 0x13)
 		set_irq_remapping_broken();
+	else if ((device == 0x3405) &&
+	    ((revision == 0x12) ||
+	     (revision == 0x22)))
+		set_irq_remapping_broken();
 
 }
 
@@ -239,6 +247,8 @@ static struct chipset early_qrk[] __initdata = {
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
 	{ PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST,
 	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
+	{ PCI_VENDOR_ID_INTEL, 0x3405, PCI_CLASS_BRIDGE_HOST,
+	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
 	{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
 	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
 	{}

arch/x86/kernel/i387.c

@@ -116,7 +116,7 @@ static void mxcsr_feature_mask_init(void)
 
 	if (cpu_has_fxsr) {
 		memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
-		asm volatile("fxsave %0" : : "m" (fx_scratch));
+		asm volatile("fxsave %0" : "+m" (fx_scratch));
 		mask = fx_scratch.mxcsr_mask;
 		if (mask == 0)
 			mask = 0x0000ffbf;

arch/x86/kernel/microcode_amd.c

@@ -220,12 +220,13 @@ int apply_microcode_amd(int cpu)
 		return 0;
 	}
 
-	if (__apply_microcode_amd(mc_amd))
+	if (__apply_microcode_amd(mc_amd)) {
 		pr_err("CPU%d: update failed for patch_level=0x%08x\n",
 			cpu, mc_amd->hdr.patch_id);
-	else
-		pr_info("CPU%d: new patch_level=0x%08x\n", cpu,
-			mc_amd->hdr.patch_id);
+		return -1;
+	}
+	pr_info("CPU%d: new patch_level=0x%08x\n", cpu,
+		mc_amd->hdr.patch_id);
 
 	uci->cpu_sig.rev = mc_amd->hdr.patch_id;
 	c->microcode = mc_amd->hdr.patch_id;

arch/x86/kernel/sys_x86_64.c

@@ -101,7 +101,7 @@ static void find_start_end(unsigned long flags, unsigned long *begin,
 				*begin = new_begin;
 		}
 	} else {
-		*begin = TASK_UNMAPPED_BASE;
+		*begin = mmap_legacy_base();
 		*end = TASK_SIZE;
 	}
 }

arch/x86/mm/mmap.c

@@ -98,7 +98,7 @@ static unsigned long mmap_base(void)
  * Bottom-up (legacy) layout on X86_32 did not support randomization, X86_64
  * does, but not when emulating X86_32
  */
-static unsigned long mmap_legacy_base(void)
+unsigned long mmap_legacy_base(void)
 {
 	if (mmap_is_ia32())
 		return TASK_UNMAPPED_BASE;

drivers/acpi/acpi_processor.c

@@ -451,7 +451,6 @@ static void acpi_processor_remove(struct acpi_device *device)
 	/* Clean up. */
 	per_cpu(processor_device_array, pr->id) = NULL;
 	per_cpu(processors, pr->id) = NULL;
-	try_offline_node(cpu_to_node(pr->id));
 
 	/* Remove the CPU. */
 	get_online_cpus();
@@ -459,6 +458,8 @@ static void acpi_processor_remove(struct acpi_device *device)
 	acpi_unmap_lsapic(pr->id);
 	put_online_cpus();
 
+	try_offline_node(cpu_to_node(pr->id));
+
  out:
 	free_cpumask_var(pr->throttling.shared_cpu_map);
 	kfree(pr);

drivers/acpi/glue.c

@@ -31,6 +31,7 @@ static LIST_HEAD(bus_type_list);
 static DECLARE_RWSEM(bus_type_sem);
 
 #define PHYSICAL_NODE_STRING "physical_node"
+#define PHYSICAL_NODE_NAME_SIZE (sizeof(PHYSICAL_NODE_STRING) + 10)
 
 int register_acpi_bus_type(struct acpi_bus_type *type)
 {
@@ -78,41 +79,108 @@ static struct acpi_bus_type *acpi_get_bus_type(struct device *dev)
 	return ret;
 }
 
-static acpi_status do_acpi_find_child(acpi_handle handle, u32 lvl_not_used,
-				      void *addr_p, void **ret_p)
+static acpi_status acpi_dev_present(acpi_handle handle, u32 lvl_not_used,
+				  void *not_used, void **ret_p)
 {
-	unsigned long long addr, sta;
-	acpi_status status;
+	struct acpi_device *adev = NULL;
 
-	status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr);
-	if (ACPI_SUCCESS(status) && addr == *((u64 *)addr_p)) {
+	acpi_bus_get_device(handle, &adev);
+	if (adev) {
 		*ret_p = handle;
-		status = acpi_bus_get_status_handle(handle, &sta);
-		if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_ENABLED))
-			return AE_CTRL_TERMINATE;
+		return AE_CTRL_TERMINATE;
 	}
 	return AE_OK;
 }
 
-acpi_handle acpi_get_child(acpi_handle parent, u64 address)
+static bool acpi_extra_checks_passed(acpi_handle handle, bool is_bridge)
 {
-	void *ret = NULL;
+	unsigned long long sta;
+	acpi_status status;
+
+	status = acpi_bus_get_status_handle(handle, &sta);
+	if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_ENABLED))
+		return false;
+
+	if (is_bridge) {
+		void *test = NULL;
+
+		/* Check if this object has at least one child device. */
+		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				    acpi_dev_present, NULL, NULL, &test);
+		return !!test;
+	}
+	return true;
+}
+
+struct find_child_context {
+	u64 addr;
+	bool is_bridge;
+	acpi_handle ret;
+	bool ret_checked;
+};
+
+static acpi_status do_find_child(acpi_handle handle, u32 lvl_not_used,
+				 void *data, void **not_used)
+{
+	struct find_child_context *context = data;
+	unsigned long long addr;
+	acpi_status status;
 
-	if (!parent)
-		return NULL;
+	status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr);
+	if (ACPI_FAILURE(status) || addr != context->addr)
+		return AE_OK;
 
-	acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, 1, NULL,
-			    do_acpi_find_child, &address, &ret);
-	return (acpi_handle)ret;
+	if (!context->ret) {
+		/* This is the first matching object.  Save its handle. */
+		context->ret = handle;
+		return AE_OK;
+	}
+	/*
+	 * There is more than one matching object with the same _ADR value.
+	 * That really is unexpected, so we are kind of beyond the scope of the
+	 * spec here.  We have to choose which one to return, though.
+	 *
+	 * First, check if the previously found object is good enough and return
+	 * its handle if so.  Second, check the same for the object that we've
+	 * just found.
+	 */
+	if (!context->ret_checked) {
+		if (acpi_extra_checks_passed(context->ret, context->is_bridge))
+			return AE_CTRL_TERMINATE;
+		else
+			context->ret_checked = true;
+	}
+	if (acpi_extra_checks_passed(handle, context->is_bridge)) {
+		context->ret = handle;
+		return AE_CTRL_TERMINATE;
+	}
+	return AE_OK;
 }
-EXPORT_SYMBOL(acpi_get_child);
+
+acpi_handle acpi_find_child(acpi_handle parent, u64 addr, bool is_bridge)
+{
+	if (parent) {
+		struct find_child_context context = {
+			.addr = addr,
+			.is_bridge = is_bridge,
+		};
+
+		acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, 1, do_find_child,
+				    NULL, &context, NULL);
+		return context.ret;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(acpi_find_child);
 
 int acpi_bind_one(struct device *dev, acpi_handle handle)
 {
 	struct acpi_device *acpi_dev;
 	acpi_status status;
 	struct acpi_device_physical_node *physical_node, *pn;
-	char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
+	char physical_node_name[PHYSICAL_NODE_NAME_SIZE];
+	struct list_head *physnode_list;
+	unsigned int node_id;
 	int retval = -EINVAL;
 
 	if (ACPI_HANDLE(dev)) {
@@ -139,25 +207,27 @@ int acpi_bind_one(struct device *dev, acpi_handle handle)
 
 	mutex_lock(&acpi_dev->physical_node_lock);
 
-	/* Sanity check. */
-	list_for_each_entry(pn, &acpi_dev->physical_node_list, node)
+	/*
+	 * Keep the list sorted by node_id so that the IDs of removed nodes can
+	 * be recycled easily.
+	 */
+	physnode_list = &acpi_dev->physical_node_list;
+	node_id = 0;
+	list_for_each_entry(pn, &acpi_dev->physical_node_list, node) {
+		/* Sanity check. */
 		if (pn->dev == dev) {
 			dev_warn(dev, "Already associated with ACPI node\n");
 			goto err_free;
 		}
-
-	/* allocate physical node id according to physical_node_id_bitmap */
-	physical_node->node_id =
-		find_first_zero_bit(acpi_dev->physical_node_id_bitmap,
-		ACPI_MAX_PHYSICAL_NODE);
-	if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) {
-		retval = -ENOSPC;
-		goto err_free;
+		if (pn->node_id == node_id) {
+			physnode_list = &pn->node;
+			node_id++;
+		}
 	}
 
-	set_bit(physical_node->node_id, acpi_dev->physical_node_id_bitmap);
+	physical_node->node_id = node_id;
 	physical_node->dev = dev;
-	list_add_tail(&physical_node->node, &acpi_dev->physical_node_list);
+	list_add(&physical_node->node, physnode_list);
 	acpi_dev->physical_node_count++;
 
 	mutex_unlock(&acpi_dev->physical_node_lock);
@@ -208,7 +278,7 @@ int acpi_unbind_one(struct device *dev)
 
 	mutex_lock(&acpi_dev->physical_node_lock);
 	list_for_each_safe(node, next, &acpi_dev->physical_node_list) {
-		char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
+		char physical_node_name[PHYSICAL_NODE_NAME_SIZE];
 
 		entry = list_entry(node, struct acpi_device_physical_node,
 			node);
@@ -216,7 +286,6 @@ int acpi_unbind_one(struct device *dev)
 			continue;
 
 		list_del(node);
-		clear_bit(entry->node_id, acpi_dev->physical_node_id_bitmap);
 
 		acpi_dev->physical_node_count--;
 

drivers/acpi/proc.c

@@ -311,6 +311,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
 			   dev->pnp.bus_id,
 			   (u32) dev->wakeup.sleep_state);
 
+		mutex_lock(&dev->physical_node_lock);
+
 		if (!dev->physical_node_count) {
 			seq_printf(seq, "%c%-8s\n",
 				dev->wakeup.flags.run_wake ? '*' : ' ',
@@ -338,6 +340,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
 				put_device(ldev);
 			}
 		}
+
+		mutex_unlock(&dev->physical_node_lock);
 	}
 	mutex_unlock(&acpi_device_lock);
 	return 0;
@@ -347,12 +351,16 @@ static void physical_device_enable_wakeup(struct acpi_device *adev)
 {
 	struct acpi_device_physical_node *entry;
 
+	mutex_lock(&adev->physical_node_lock);
+
 	list_for_each_entry(entry,
 		&adev->physical_node_list, node)
 		if (entry->dev && device_can_wakeup(entry->dev)) {
 			bool enable = !device_may_wakeup(entry->dev);
 			device_set_wakeup_enable(entry->dev, enable);
 		}
+
+	mutex_unlock(&adev->physical_node_lock);
 }
 
 static ssize_t

drivers/acpi/video.c

@@ -689,7 +689,7 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,
 	 * Some systems always report current brightness level as maximum
 	 * through _BQC, we need to test another value for them.
 	 */
-	test_level = current_level == max_level ? br->levels[2] : max_level;
+	test_level = current_level == max_level ? br->levels[3] : max_level;
 
 	result = acpi_video_device_lcd_set_level(device, test_level);
 	if (result)

drivers/ata/pata_imx.c

@@ -237,6 +237,7 @@ static const struct of_device_id imx_pata_dt_ids[] = {
 		/* sentinel */
 	}
 };
+MODULE_DEVICE_TABLE(of, imx_pata_dt_ids);
 
 static struct platform_driver pata_imx_driver = {
 	.probe		= pata_imx_probe,

drivers/base/regmap/regcache.c

@@ -719,7 +719,8 @@ static int regcache_sync_block_raw(struct regmap *map, void *block,
 		}
 	}
 
-	return regcache_sync_block_raw_flush(map, &data, base, regtmp);
+	return regcache_sync_block_raw_flush(map, &data, base, regtmp +
+			map->reg_stride);
 }
 
 int regcache_sync_block(struct regmap *map, void *block,

drivers/block/aoe/aoecmd.c

@@ -906,16 +906,10 @@ bio_pageinc(struct bio *bio)
 	int i;
 
 	bio_for_each_segment(bv, bio, i) {
-		page = bv->bv_page;
 		/* Non-zero page count for non-head members of
-		 * compound pages is no longer allowed by the kernel,
-		 * but this has never been seen here.
+		 * compound pages is no longer allowed by the kernel.
 		 */
-		if (unlikely(PageCompound(page)))
-			if (compound_trans_head(page) != page) {
-				pr_crit("page tail used for block I/O\n");
-				BUG();
-			}
+		page = compound_trans_head(bv->bv_page);
 		atomic_inc(&page->_count);
 	}
 }
@@ -924,10 +918,13 @@ static void
 bio_pagedec(struct bio *bio)
 {
 	struct bio_vec *bv;
+	struct page *page;
 	int i;
 
-	bio_for_each_segment(bv, bio, i)
-		atomic_dec(&bv->bv_page->_count);
+	bio_for_each_segment(bv, bio, i) {
+		page = compound_trans_head(bv->bv_page);
+		atomic_dec(&page->_count);
+	}
 }
 
 static void

drivers/char/virtio_console.c

@@ -272,9 +272,12 @@ static struct port *find_port_by_devt_in_portdev(struct ports_device *portdev,
 	unsigned long flags;
 
 	spin_lock_irqsave(&portdev->ports_lock, flags);
-	list_for_each_entry(port, &portdev->ports, list)
-		if (port->cdev->dev == dev)
+	list_for_each_entry(port, &portdev->ports, list) {
+		if (port->cdev->dev == dev) {
+			kref_get(&port->kref);
 			goto out;
+		}
+	}
 	port = NULL;
 out:
 	spin_unlock_irqrestore(&portdev->ports_lock, flags);
@@ -746,6 +749,10 @@ static ssize_t port_fops_read(struct file *filp, char __user *ubuf,
 
 	port = filp->private_data;
 
+	/* Port is hot-unplugged. */
+	if (!port->guest_connected)
+		return -ENODEV;
+
 	if (!port_has_data(port)) {
 		/*
 		 * If nothing's connected on the host just return 0 in
@@ -762,7 +769,7 @@ static ssize_t port_fops_read(struct file *filp, char __user *ubuf,
 		if (ret < 0)
 			return ret;
 	}
-	/* Port got hot-unplugged. */
+	/* Port got hot-unplugged while we were waiting above. */
 	if (!port->guest_connected)
 		return -ENODEV;
 	/*
@@ -932,13 +939,25 @@ static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe,
 	if (is_rproc_serial(port->out_vq->vdev))
 		return -EINVAL;
 
+	/*
+	 * pipe->nrbufs == 0 means there are no data to transfer,
+	 * so this returns just 0 for no data.
+	 */
+	pipe_lock(pipe);
+	if (!pipe->nrbufs) {
+		ret = 0;
+		goto error_out;
+	}
+
 	ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK);
 	if (ret < 0)
-		return ret;
+		goto error_out;
 
 	buf = alloc_buf(port->out_vq, 0, pipe->nrbufs);
-	if (!buf)
-		return -ENOMEM;
+	if (!buf) {
+		ret = -ENOMEM;
+		goto error_out;
+	}
 
 	sgl.n = 0;
 	sgl.len = 0;
@@ -946,12 +965,17 @@ static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe,
 	sgl.sg = buf->sg;
 	sg_init_table(sgl.sg, sgl.size);
 	ret = __splice_from_pipe(pipe, &sd, pipe_to_sg);
+	pipe_unlock(pipe);
 	if (likely(ret > 0))
 		ret = __send_to_port(port, buf->sg, sgl.n, sgl.len, buf, true);
 
 	if (unlikely(ret <= 0))
 		free_buf(buf, true);
 	return ret;
+
+error_out:
+	pipe_unlock(pipe);
+	return ret;
 }
 
 static unsigned int port_fops_poll(struct file *filp, poll_table *wait)
@@ -1019,14 +1043,14 @@ static int port_fops_open(struct inode *inode, struct file *filp)
 	struct port *port;
 	int ret;
 
+	/* We get the port with a kref here */
 	port = find_port_by_devt(cdev->dev);
+	if (!port) {
+		/* Port was unplugged before we could proceed */
+		return -ENXIO;
+	}
 	filp->private_data = port;
 
-	/* Prevent against a port getting hot-unplugged at the same time */
-	spin_lock_irq(&port->portdev->ports_lock);
-	kref_get(&port->kref);
-	spin_unlock_irq(&port->portdev->ports_lock);
-
 	/*
 	 * Don't allow opening of console port devices -- that's done
 	 * via /dev/hvc
@@ -1498,14 +1522,6 @@ static void remove_port(struct kref *kref)
 
 	port = container_of(kref, struct port, kref);
 
-	sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
-	device_destroy(pdrvdata.class, port->dev->devt);
-	cdev_del(port->cdev);
-
-	kfree(port->name);
-
-	debugfs_remove(port->debugfs_file);
-
 	kfree(port);
 }
 
@@ -1539,12 +1555,14 @@ static void unplug_port(struct port *port)
 	spin_unlock_irq(&port->portdev->ports_lock);
 
 	if (port->guest_connected) {
+		/* Let the app know the port is going down. */
+		send_sigio_to_port(port);
+
+		/* Do this after sigio is actually sent */
 		port->guest_connected = false;
 		port->host_connected = false;
-		wake_up_interruptible(&port->waitqueue);
 
-		/* Let the app know the port is going down. */
-		send_sigio_to_port(port);
+		wake_up_interruptible(&port->waitqueue);
 	}
 
 	if (is_console_port(port)) {
@@ -1563,6 +1581,14 @@ static void unplug_port(struct port *port)
 	 */
 	port->portdev = NULL;
 
+	sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
+	device_destroy(pdrvdata.class, port->dev->devt);
+	cdev_del(port->cdev);
+
+	kfree(port->name);
+
+	debugfs_remove(port->debugfs_file);
+
 	/*
 	 * Locks around here are not necessary - a port can't be
 	 * opened after we removed the port struct from ports_list

drivers/clk/samsung/clk-exynos4.c

@@ -581,11 +581,15 @@ struct samsung_div_clock exynos4x12_div_clks[] __initdata = {
 	DIV(none, "div_spi1_isp", "mout_spi1_isp", E4X12_DIV_ISP, 16, 4),
 	DIV(none, "div_spi1_isp_pre", "div_spi1_isp", E4X12_DIV_ISP, 20, 8),
 	DIV(none, "div_uart_isp", "mout_uart_isp", E4X12_DIV_ISP, 28, 4),
-	DIV(div_isp0, "div_isp0", "aclk200", E4X12_DIV_ISP0, 0, 3),
-	DIV(div_isp1, "div_isp1", "aclk200", E4X12_DIV_ISP0, 4, 3),
+	DIV_F(div_isp0, "div_isp0", "aclk200", E4X12_DIV_ISP0, 0, 3,
+						CLK_GET_RATE_NOCACHE, 0),
+	DIV_F(div_isp1, "div_isp1", "aclk200", E4X12_DIV_ISP0, 4, 3,
+						CLK_GET_RATE_NOCACHE, 0),
 	DIV(none, "div_mpwm", "div_isp1", E4X12_DIV_ISP1, 0, 3),
-	DIV(div_mcuisp0, "div_mcuisp0", "aclk400_mcuisp", E4X12_DIV_ISP1, 4, 3),
-	DIV(div_mcuisp1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1, 8, 3),
+	DIV_F(div_mcuisp0, "div_mcuisp0", "aclk400_mcuisp", E4X12_DIV_ISP1,
+						4, 3, CLK_GET_RATE_NOCACHE, 0),
+	DIV_F(div_mcuisp1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1,
+						8, 3, CLK_GET_RATE_NOCACHE, 0),
 	DIV(sclk_fimg2d, "sclk_fimg2d", "mout_g2d", DIV_DMC1, 0, 4),
 };
 
@@ -863,57 +867,57 @@ struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
 	GATE_DA(i2s0, "samsung-i2s.0", "i2s0", "aclk100",
 			E4X12_GATE_IP_MAUDIO, 3, 0, 0, "iis"),
 	GATE(fimc_isp, "isp", "aclk200", E4X12_GATE_ISP0, 0,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(fimc_drc, "drc", "aclk200", E4X12_GATE_ISP0, 1,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(fimc_fd, "fd", "aclk200", E4X12_GATE_ISP0, 2,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(fimc_lite0, "lite0", "aclk200", E4X12_GATE_ISP0, 3,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(fimc_lite1, "lite1", "aclk200", E4X12_GATE_ISP0, 4,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(mcuisp, "mcuisp", "aclk200", E4X12_GATE_ISP0, 5,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(gicisp, "gicisp", "aclk200", E4X12_GATE_ISP0, 7,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(smmu_isp, "smmu_isp", "aclk200", E4X12_GATE_ISP0, 8,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(smmu_drc, "smmu_drc", "aclk200", E4X12_GATE_ISP0, 9,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(smmu_fd, "smmu_fd", "aclk200", E4X12_GATE_ISP0, 10,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(smmu_lite0, "smmu_lite0", "aclk200", E4X12_GATE_ISP0, 11,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(smmu_lite1, "smmu_lite1", "aclk200", E4X12_GATE_ISP0, 12,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(ppmuispmx, "ppmuispmx", "aclk200", E4X12_GATE_ISP0, 20,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(ppmuispx, "ppmuispx", "aclk200", E4X12_GATE_ISP0, 21,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(mcuctl_isp, "mcuctl_isp", "aclk200", E4X12_GATE_ISP0, 23,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(mpwm_isp, "mpwm_isp", "aclk200", E4X12_GATE_ISP0, 24,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(i2c0_isp, "i2c0_isp", "aclk200", E4X12_GATE_ISP0, 25,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(i2c1_isp, "i2c1_isp", "aclk200", E4X12_GATE_ISP0, 26,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(mtcadc_isp, "mtcadc_isp", "aclk200", E4X12_GATE_ISP0, 27,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(pwm_isp, "pwm_isp", "aclk200", E4X12_GATE_ISP0, 28,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(wdt_isp, "wdt_isp", "aclk200", E4X12_GATE_ISP0, 30,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(uart_isp, "uart_isp", "aclk200", E4X12_GATE_ISP0, 31,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(asyncaxim, "asyncaxim", "aclk200", E4X12_GATE_ISP1, 0,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(smmu_ispcx, "smmu_ispcx", "aclk200", E4X12_GATE_ISP1, 4,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(spi0_isp, "spi0_isp", "aclk200", E4X12_GATE_ISP1, 12,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(spi1_isp, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13,
-			CLK_IGNORE_UNUSED, 0),
+			CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0),
 	GATE(g2d, "g2d", "aclk200", GATE_IP_DMC, 23, 0, 0),
 };
 

drivers/clk/zynq/clkc.c

@@ -71,6 +71,7 @@ static DEFINE_SPINLOCK(armpll_lock);
 static DEFINE_SPINLOCK(ddrpll_lock);
 static DEFINE_SPINLOCK(iopll_lock);
 static DEFINE_SPINLOCK(armclk_lock);
+static DEFINE_SPINLOCK(swdtclk_lock);
 static DEFINE_SPINLOCK(ddrclk_lock);
 static DEFINE_SPINLOCK(dciclk_lock);
 static DEFINE_SPINLOCK(gem0clk_lock);
@@ -293,7 +294,7 @@ static void __init zynq_clk_setup(struct device_node *np)
 	}
 	clks[swdt] = clk_register_mux(NULL, clk_output_name[swdt],
 			swdt_ext_clk_mux_parents, 2, CLK_SET_RATE_PARENT,
-			SLCR_SWDT_CLK_SEL, 0, 1, 0, &gem0clk_lock);
+			SLCR_SWDT_CLK_SEL, 0, 1, 0, &swdtclk_lock);
 
 	/* DDR clocks */
 	clk = clk_register_divider(NULL, "ddr2x_div", "ddrpll", 0,
@@ -364,8 +365,9 @@ static void __init zynq_clk_setup(struct device_node *np)
 			CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6,
 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
 			&gem0clk_lock);
-	clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0,
-			SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock);
+	clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2,
+			CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 6, 1, 0,
+			&gem0clk_lock);
 	clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0],
 			"gem0_emio_mux", CLK_SET_RATE_PARENT,
 			SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock);
@@ -386,8 +388,9 @@ static void __init zynq_clk_setup(struct device_node *np)
 			CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6,
 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
 			&gem1clk_lock);
-	clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0,
-			SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock);
+	clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2,
+			CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 6, 1, 0,
+			&gem1clk_lock);
 	clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1],
 			"gem1_emio_mux", CLK_SET_RATE_PARENT,
 			SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);

drivers/cpufreq/cpufreq_conservative.c

@@ -221,8 +221,8 @@ static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf,
 	return count;
 }
 
-static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
+		const char *buf, size_t count)
 {
 	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
 	unsigned int input, j;
@@ -235,10 +235,10 @@ static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
 	if (input > 1)
 		input = 1;
 
-	if (input == cs_tuners->ignore_nice) /* nothing to do */
+	if (input == cs_tuners->ignore_nice_load) /* nothing to do */
 		return count;
 
-	cs_tuners->ignore_nice = input;
+	cs_tuners->ignore_nice_load = input;
 
 	/* we need to re-evaluate prev_cpu_idle */
 	for_each_online_cpu(j) {
@@ -246,7 +246,7 @@ static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
 		dbs_info = &per_cpu(cs_cpu_dbs_info, j);
 		dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
 					&dbs_info->cdbs.prev_cpu_wall, 0);
-		if (cs_tuners->ignore_nice)
+		if (cs_tuners->ignore_nice_load)
 			dbs_info->cdbs.prev_cpu_nice =
 				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
 	}
@@ -279,7 +279,7 @@ show_store_one(cs, sampling_rate);
 show_store_one(cs, sampling_down_factor);
 show_store_one(cs, up_threshold);
 show_store_one(cs, down_threshold);
-show_store_one(cs, ignore_nice);
+show_store_one(cs, ignore_nice_load);
 show_store_one(cs, freq_step);
 declare_show_sampling_rate_min(cs);
 
@@ -287,7 +287,7 @@ gov_sys_pol_attr_rw(sampling_rate);
 gov_sys_pol_attr_rw(sampling_down_factor);
 gov_sys_pol_attr_rw(up_threshold);
 gov_sys_pol_attr_rw(down_threshold);
-gov_sys_pol_attr_rw(ignore_nice);
+gov_sys_pol_attr_rw(ignore_nice_load);
 gov_sys_pol_attr_rw(freq_step);
 gov_sys_pol_attr_ro(sampling_rate_min);
 
@@ -297,7 +297,7 @@ static struct attribute *dbs_attributes_gov_sys[] = {
 	&sampling_down_factor_gov_sys.attr,
 	&up_threshold_gov_sys.attr,
 	&down_threshold_gov_sys.attr,
-	&ignore_nice_gov_sys.attr,
+	&ignore_nice_load_gov_sys.attr,
 	&freq_step_gov_sys.attr,
 	NULL
 };
@@ -313,7 +313,7 @@ static struct attribute *dbs_attributes_gov_pol[] = {
 	&sampling_down_factor_gov_pol.attr,
 	&up_threshold_gov_pol.attr,
 	&down_threshold_gov_pol.attr,
-	&ignore_nice_gov_pol.attr,
+	&ignore_nice_load_gov_pol.attr,
 	&freq_step_gov_pol.attr,
 	NULL
 };
@@ -338,7 +338,7 @@ static int cs_init(struct dbs_data *dbs_data)
 	tuners->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
 	tuners->down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD;
 	tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
-	tuners->ignore_nice = 0;
+	tuners->ignore_nice_load = 0;
 	tuners->freq_step = DEF_FREQUENCY_STEP;
 
 	dbs_data->tuners = tuners;

drivers/cpufreq/cpufreq_governor.c

@@ -47,9 +47,9 @@ void dbs_check_cpu(struct dbs_data *dbs_data, int cpu)
 	unsigned int j;
 
 	if (dbs_data->cdata->governor == GOV_ONDEMAND)
-		ignore_nice = od_tuners->ignore_nice;
+		ignore_nice = od_tuners->ignore_nice_load;
 	else
-		ignore_nice = cs_tuners->ignore_nice;
+		ignore_nice = cs_tuners->ignore_nice_load;
 
 	policy = cdbs->cur_policy;
 
@@ -298,12 +298,12 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		cs_tuners = dbs_data->tuners;
 		cs_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu);
 		sampling_rate = cs_tuners->sampling_rate;
-		ignore_nice = cs_tuners->ignore_nice;
+		ignore_nice = cs_tuners->ignore_nice_load;
 	} else {
 		od_tuners = dbs_data->tuners;
 		od_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu);
 		sampling_rate = od_tuners->sampling_rate;
-		ignore_nice = od_tuners->ignore_nice;
+		ignore_nice = od_tuners->ignore_nice_load;
 		od_ops = dbs_data->cdata->gov_ops;
 		io_busy = od_tuners->io_is_busy;
 	}

drivers/cpufreq/cpufreq_governor.h

@@ -165,7 +165,7 @@ struct cs_cpu_dbs_info_s {
 
 /* Per policy Governers sysfs tunables */
 struct od_dbs_tuners {
-	unsigned int ignore_nice;
+	unsigned int ignore_nice_load;
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
 	unsigned int up_threshold;
@@ -175,7 +175,7 @@ struct od_dbs_tuners {
 };
 
 struct cs_dbs_tuners {
-	unsigned int ignore_nice;
+	unsigned int ignore_nice_load;
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
 	unsigned int up_threshold;

drivers/cpufreq/cpufreq_ondemand.c

@@ -403,8 +403,8 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
 	return count;
 }
 
-static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
+		const char *buf, size_t count)
 {
 	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
 	unsigned int input;
@@ -419,10 +419,10 @@ static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
 	if (input > 1)
 		input = 1;
 
-	if (input == od_tuners->ignore_nice) { /* nothing to do */
+	if (input == od_tuners->ignore_nice_load) { /* nothing to do */
 		return count;
 	}
-	od_tuners->ignore_nice = input;
+	od_tuners->ignore_nice_load = input;
 
 	/* we need to re-evaluate prev_cpu_idle */
 	for_each_online_cpu(j) {
@@ -430,7 +430,7 @@ static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
 		dbs_info = &per_cpu(od_cpu_dbs_info, j);
 		dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
 			&dbs_info->cdbs.prev_cpu_wall, od_tuners->io_is_busy);
-		if (od_tuners->ignore_nice)
+		if (od_tuners->ignore_nice_load)
 			dbs_info->cdbs.prev_cpu_nice =
 				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
 
@@ -461,7 +461,7 @@ show_store_one(od, sampling_rate);
 show_store_one(od, io_is_busy);
 show_store_one(od, up_threshold);
 show_store_one(od, sampling_down_factor);
-show_store_one(od, ignore_nice);
+show_store_one(od, ignore_nice_load);
 show_store_one(od, powersave_bias);
 declare_show_sampling_rate_min(od);
 
@@ -469,7 +469,7 @@ gov_sys_pol_attr_rw(sampling_rate);
 gov_sys_pol_attr_rw(io_is_busy);
 gov_sys_pol_attr_rw(up_threshold);
 gov_sys_pol_attr_rw(sampling_down_factor);
-gov_sys_pol_attr_rw(ignore_nice);
+gov_sys_pol_attr_rw(ignore_nice_load);
 gov_sys_pol_attr_rw(powersave_bias);
 gov_sys_pol_attr_ro(sampling_rate_min);
 
@@ -478,7 +478,7 @@ static struct attribute *dbs_attributes_gov_sys[] = {
 	&sampling_rate_gov_sys.attr,
 	&up_threshold_gov_sys.attr,
 	&sampling_down_factor_gov_sys.attr,
-	&ignore_nice_gov_sys.attr,
+	&ignore_nice_load_gov_sys.attr,
 	&powersave_bias_gov_sys.attr,
 	&io_is_busy_gov_sys.attr,
 	NULL
@@ -494,7 +494,7 @@ static struct attribute *dbs_attributes_gov_pol[] = {
 	&sampling_rate_gov_pol.attr,
 	&up_threshold_gov_pol.attr,
 	&sampling_down_factor_gov_pol.attr,
-	&ignore_nice_gov_pol.attr,
+	&ignore_nice_load_gov_pol.attr,
 	&powersave_bias_gov_pol.attr,
 	&io_is_busy_gov_pol.attr,
 	NULL
@@ -544,7 +544,7 @@ static int od_init(struct dbs_data *dbs_data)
 	}
 
 	tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
-	tuners->ignore_nice = 0;
+	tuners->ignore_nice_load = 0;
 	tuners->powersave_bias = default_powersave_bias;
 	tuners->io_is_busy = should_io_be_busy();
 

drivers/cpufreq/loongson2_cpufreq.c

@@ -118,11 +118,6 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		clk_put(cpuclk);
 		return -EINVAL;
 	}
-	ret = clk_set_rate(cpuclk, rate);
-	if (ret) {
-		clk_put(cpuclk);
-		return ret;
-	}
 
 	/* clock table init */
 	for (i = 2;
@@ -130,6 +125,12 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	     i++)
 		loongson2_clockmod_table[i].frequency = (rate * i) / 8;
 
+	ret = clk_set_rate(cpuclk, rate);
+	if (ret) {
+		clk_put(cpuclk);
+		return ret;
+	}
+
 	policy->cur = loongson2_cpufreq_get(policy->cpu);
 
 	cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0],

drivers/dma/pch_dma.c

@@ -867,6 +867,7 @@ static int pch_dma_probe(struct pci_dev *pdev,
 
 	if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
 		dev_err(&pdev->dev, "Cannot find proper base address\n");
+		err = -ENODEV;
 		goto err_disable_pdev;
 	}
 

drivers/dma/pl330.c

@@ -2505,6 +2505,10 @@ static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
 	/* Assign cookies to all nodes */
 	while (!list_empty(&last->node)) {
 		desc = list_entry(last->node.next, struct dma_pl330_desc, node);
+		if (pch->cyclic) {
+			desc->txd.callback = last->txd.callback;
+			desc->txd.callback_param = last->txd.callback_param;
+		}
 
 		dma_cookie_assign(&desc->txd);
 
@@ -2688,45 +2692,82 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
 		size_t period_len, enum dma_transfer_direction direction,
 		unsigned long flags, void *context)
 {
-	struct dma_pl330_desc *desc;
+	struct dma_pl330_desc *desc = NULL, *first = NULL;
 	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct dma_pl330_dmac *pdmac = pch->dmac;
+	unsigned int i;
 	dma_addr_t dst;
 	dma_addr_t src;
 
-	desc = pl330_get_desc(pch);
-	if (!desc) {
-		dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
-			__func__, __LINE__);
+	if (len % period_len != 0)
 		return NULL;
-	}
 
-	switch (direction) {
-	case DMA_MEM_TO_DEV:
-		desc->rqcfg.src_inc = 1;
-		desc->rqcfg.dst_inc = 0;
-		desc->req.rqtype = MEMTODEV;
-		src = dma_addr;
-		dst = pch->fifo_addr;
-		break;
-	case DMA_DEV_TO_MEM:
-		desc->rqcfg.src_inc = 0;
-		desc->rqcfg.dst_inc = 1;
-		desc->req.rqtype = DEVTOMEM;
-		src = pch->fifo_addr;
-		dst = dma_addr;
-		break;
-	default:
+	if (!is_slave_direction(direction)) {
 		dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
 		__func__, __LINE__);
 		return NULL;
 	}
 
-	desc->rqcfg.brst_size = pch->burst_sz;
-	desc->rqcfg.brst_len = 1;
+	for (i = 0; i < len / period_len; i++) {
+		desc = pl330_get_desc(pch);
+		if (!desc) {
+			dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
+				__func__, __LINE__);
 
-	pch->cyclic = true;
+			if (!first)
+				return NULL;
+
+			spin_lock_irqsave(&pdmac->pool_lock, flags);
+
+			while (!list_empty(&first->node)) {
+				desc = list_entry(first->node.next,
+						struct dma_pl330_desc, node);
+				list_move_tail(&desc->node, &pdmac->desc_pool);
+			}
+
+			list_move_tail(&first->node, &pdmac->desc_pool);
 
-	fill_px(&desc->px, dst, src, period_len);
+			spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+
+			return NULL;
+		}
+
+		switch (direction) {
+		case DMA_MEM_TO_DEV:
+			desc->rqcfg.src_inc = 1;
+			desc->rqcfg.dst_inc = 0;
+			desc->req.rqtype = MEMTODEV;
+			src = dma_addr;
+			dst = pch->fifo_addr;
+			break;
+		case DMA_DEV_TO_MEM:
+			desc->rqcfg.src_inc = 0;
+			desc->rqcfg.dst_inc = 1;
+			desc->req.rqtype = DEVTOMEM;
+			src = pch->fifo_addr;
+			dst = dma_addr;
+			break;
+		default:
+			break;
+		}
+
+		desc->rqcfg.brst_size = pch->burst_sz;
+		desc->rqcfg.brst_len = 1;
+		fill_px(&desc->px, dst, src, period_len);
+
+		if (!first)
+			first = desc;
+		else
+			list_add_tail(&desc->node, &first->node);
+
+		dma_addr += period_len;
+	}
+
+	if (!desc)
+		return NULL;
+
+	pch->cyclic = true;
+	desc->txd.flags = flags;
 
 	return &desc->txd;
 }

drivers/dma/sh/shdma.c

@@ -400,8 +400,8 @@ static size_t sh_dmae_get_partial(struct shdma_chan *schan,
 						    shdma_chan);
 	struct sh_dmae_desc *sh_desc = container_of(sdesc,
 					struct sh_dmae_desc, shdma_desc);
-	return (sh_desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) <<
-		sh_chan->xmit_shift;
+	return sh_desc->hw.tcr -
+		(sh_dmae_readl(sh_chan, TCR) << sh_chan->xmit_shift);
 }
 
 /* Called from error IRQ or NMI */

drivers/gpu/drm/ast/ast_ttm.c

@@ -323,6 +323,7 @@ int ast_bo_create(struct drm_device *dev, int size, int align,
 
 	astbo->gem.driver_private = NULL;
 	astbo->bo.bdev = &ast->ttm.bdev;
+	astbo->bo.bdev->dev_mapping = dev->dev_mapping;
 
 	ast_ttm_placement(astbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
 

drivers/gpu/drm/cirrus/cirrus_ttm.c

@@ -328,6 +328,7 @@ int cirrus_bo_create(struct drm_device *dev, int size, int align,
 
 	cirrusbo->gem.driver_private = NULL;
 	cirrusbo->bo.bdev = &cirrus->ttm.bdev;
+	cirrusbo->bo.bdev->dev_mapping = dev->dev_mapping;
 
 	cirrus_ttm_placement(cirrusbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);