Merge branch 'linus' into perfcounters/core

Merge reason: merge almost-rc8 into perfcounters/core, which was -rc6
              based - to pick up the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/ABI/testing/sysfs-kernel-slab

@@ -0,0 +1,479 @@
+What:		/sys/kernel/slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The /sys/kernel/slab directory contains a snapshot of the
+		internal state of the SLUB allocator for each cache.  Certain
+		files may be modified to change the behavior of the cache (and
+		any cache it aliases, if any).
+Users:		kernel memory tuning tools
+
+What:		/sys/kernel/slab/cache/aliases
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The aliases file is read-only and specifies how many caches
+		have merged into this cache.
+
+What:		/sys/kernel/slab/cache/align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The align file is read-only and specifies the cache's object
+		alignment in bytes.
+
+What:		/sys/kernel/slab/cache/alloc_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_calls file is read-only and lists the kernel code
+		locations from which allocations for this cache were performed.
+		The alloc_calls file only contains information if debugging is
+		enabled for that cache (see Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/alloc_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_fastpath file is read-only and specifies how many
+		objects have been allocated using the fast path.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_from_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_from_partial file is read-only and specifies how
+		many times a cpu slab has been full and it has been refilled
+		by using a slab from the list of partially used slabs.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_refill
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_refill file is read-only and specifies how many
+		times the per-cpu freelist was empty but there were objects
+		available as the result of remote cpu frees.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slab file is read-only and specifies how many times
+		a new slab had to be allocated from the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slowpath file is read-only and specifies how many
+		objects have been allocated using the slow path because of a
+		refill or allocation from a partial or new slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/cache_dma
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cache_dma file is read-only and specifies whether objects
+		are from ZONE_DMA.
+		Available when CONFIG_ZONE_DMA is enabled.
+
+What:		/sys/kernel/slab/cache/cpu_slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cpu_slabs file is read-only and displays how many cpu slabs
+		are active and their NUMA locality.
+
+What:		/sys/kernel/slab/cache/cpuslab_flush
+Date:		April 2009
+KernelVersion:	2.6.31
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file cpuslab_flush is read-only and specifies how many
+		times a cache's cpu slabs have been flushed as the result of
+		destroying or shrinking a cache, a cpu going offline, or as
+		the result of forcing an allocation from a certain node.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/ctor
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The ctor file is read-only and specifies the cache's object
+		constructor function, which is invoked for each object when a
+		new slab is allocated.
+
+What:		/sys/kernel/slab/cache/deactivate_empty
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_empty is read-only and specifies how many
+		times an empty cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_full
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_full is read-only and specifies how many
+		times a full cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_remote_frees
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_remote_frees is read-only and specifies how
+		many times a cpu slab has been deactivated and contained free
+		objects that were freed remotely.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_head
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_head is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		head of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_tail
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_tail is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		tail of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/destroy_by_rcu
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The destroy_by_rcu file is read-only and specifies whether
+		slabs (not objects) are freed by rcu.
+
+What:		/sys/kernel/slab/cache/free_add_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_add_partial is read-only and specifies how many
+		times an object has been freed in a full slab so that it had to
+		added to its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_calls file is read-only and lists the locations of
+		object frees if slab debugging is enabled (see
+		Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/free_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_fastpath file is read-only and specifies how many
+		objects have been freed using the fast path because it was an
+		object from the cpu slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_frozen
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_frozen file is read-only and specifies how many
+		objects have been freed to a frozen slab (i.e. a remote cpu
+		slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_remove_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_remove_partial is read-only and specifies how
+		many times an object has been freed to a now-empty slab so
+		that it had to be removed from its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slab file is read-only and specifies how many times an
+		empty slab has been freed back to the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slowpath file is read-only and specifies how many
+		objects have been freed using the slow path (i.e. to a full or
+		partial slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/hwcache_align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The hwcache_align file is read-only and specifies whether
+		objects are aligned on cachelines.
+
+What:		/sys/kernel/slab/cache/min_partial
+Date:		February 2009
+KernelVersion:	2.6.30
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		David Rientjes <rientjes@google.com>
+Description:
+		The min_partial file specifies how many empty slabs shall
+		remain on a node's partial list to avoid the overhead of
+		allocating new slabs.  Such slabs may be reclaimed by utilizing
+		the shrink file.
+
+What:		/sys/kernel/slab/cache/object_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The object_size file is read-only and specifies the cache's
+		object size.
+
+What:		/sys/kernel/slab/cache/objects
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects file is read-only and displays how many objects are
+		active and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/objects_partial
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects_partial file is read-only and displays how many
+		objects are on partial slabs and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/objs_per_slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file objs_per_slab is read-only and specifies how many
+		objects may be allocated from a single slab of the order
+		specified in /sys/kernel/slab/cache/order.
+
+What:		/sys/kernel/slab/cache/order
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order file specifies the page order at which new slabs are
+		allocated.  It is writable and can be changed to increase the
+		number of objects per slab.  If a slab cannot be allocated
+		because of fragmentation, SLUB will retry with the minimum order
+		possible depending on its characteristics.
+
+What:		/sys/kernel/slab/cache/order_fallback
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file order_fallback is read-only and specifies how many
+		times an allocation of a new slab has not been possible at the
+		cache's order and instead fallen back to its minimum possible
+		order.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/partial
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The partial file is read-only and displays how long many
+		partial slabs there are and how long each node's list is.
+
+What:		/sys/kernel/slab/cache/poison
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The poison file specifies whether objects should be poisoned
+		when a new slab is allocated.
+
+What:		/sys/kernel/slab/cache/reclaim_account
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The reclaim_account file specifies whether the cache's objects
+		are reclaimable (and grouped by their mobility).
+
+What:		/sys/kernel/slab/cache/red_zone
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The red_zone file specifies whether the cache's objects are red
+		zoned.
+
+What:		/sys/kernel/slab/cache/remote_node_defrag_ratio
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file remote_node_defrag_ratio specifies the percentage of
+		times SLUB will attempt to refill the cpu slab with a partial
+		slab from a remote node as opposed to allocating a new slab on
+		the local node.  This reduces the amount of wasted memory over
+		the entire system but can be expensive.
+		Available when CONFIG_NUMA is enabled.
+
+What:		/sys/kernel/slab/cache/sanity_checks
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The sanity_checks file specifies whether expensive checks
+		should be performed on free and, at minimum, enables double free
+		checks.  Caches that enable sanity_checks cannot be merged with
+		caches that do not.
+
+What:		/sys/kernel/slab/cache/shrink
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The shrink file is written when memory should be reclaimed from
+		a cache.  Empty partial slabs are freed and the partial list is
+		sorted so the slabs with the fewest available objects are used
+		first.
+
+What:		/sys/kernel/slab/cache/slab_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slab_size file is read-only and specifies the object size
+		with metadata (debugging information and alignment) in bytes.
+
+What:		/sys/kernel/slab/cache/slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slabs file is read-only and displays how long many slabs
+		there are (both cpu and partial) and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/store_user
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The store_user file specifies whether the location of
+		allocation or free should be tracked for a cache.
+
+What:		/sys/kernel/slab/cache/total_objects
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The total_objects file is read-only and displays how many total
+		objects a cache has and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/trace
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The trace file specifies whether object allocations and frees
+		should be traced.
+
+What:		/sys/kernel/slab/cache/validate
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		Writing to the validate file causes SLUB to traverse all of its
+		cache's objects and check the validity of metadata.

Documentation/filesystems/tmpfs.txt

@@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
 Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
-   Hugh Dickins <hugh@veritas.com>, 4 June 2007
+   Hugh Dickins, 4 June 2007

Documentation/input/multi-touch-protocol.txt

@@ -18,8 +18,12 @@ Usage
 Anonymous finger details are sent sequentially as separate packets of ABS
 events. Only the ABS_MT events are recognized as part of a finger
 packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
@@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
 ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
 device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
 of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else.  Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   SYN_REPORT
 
 
 Event Semantics
@@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
 surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
 
 ABS_MT_TOUCH_MINOR
 
 The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
 
 ABS_MT_WIDTH_MAJOR
 
 The length, in surface units, of the major axis of the approaching
 tool. This should be understood as the size of the tool itself. The
 orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
 
 ABS_MT_WIDTH_MINOR
 
 The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
 
 The above four values can be used to derive additional information about
 the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@@ -70,14 +89,17 @@ different characteristic widths [1].
 
 ABS_MT_ORIENTATION
 
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned.  Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
 
 ABS_MT_POSITION_X
 
@@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
 contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+   ABS_MT_TOUCH_MAJOR := max(X, Y)
+   ABS_MT_TOUCH_MINOR := min(X, Y)
+   ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
 
 
 Finger Tracking
@@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
 anonymous contacts currently on the surface. The order in which the packets
 appear in the event stream is not important.
 
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
 initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
 unique until the contact vanishes (when the finger leaves the surface). The
 problem of assigning a set of anonymous fingers to a set of identified
 fingers is a euclidian bipartite matching problem at each event update, and
 relies on a sufficiently rapid update rate.
 
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
 Notes
 -----
 
@@ -136,5 +189,7 @@ could be used to derive tilt.
 time of writing (April 2009), the MT protocol is not yet merged, and the
 prototype implements finger matching, basic mouse support and two-finger
 scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
 implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.

Documentation/kernel-parameters.txt

@@ -1535,6 +1535,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
+	noxsave		[BUGS=X86] Disables x86 extended register state save
+			and restore using xsave. The kernel will fallback to
+			enabling legacy floating-point and sse state.
+
 	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
 			wfi(ARM) instruction doesn't work correctly and not to
 			use it. This is also useful when using JTAG debugger.

Documentation/networking/ip-sysctl.txt

@@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
 	See tcp_wmem for a description.
 
-UNDOCUMENTED:
 
 /proc/sys/net/core/*
-	dev_weight FIXME
+dev_weight - INTEGER
+	The maximum number of packets that kernel can handle on a NAPI
+	interrupt, it's a Per-CPU variable.
+
+	Default: 64
 
 /proc/sys/net/unix/*
-	max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+	The maximum length of dgram socket receive queue
+
+	Default: 10
+
+
+UNDOCUMENTED:
 
 /proc/sys/net/irda/*
 	fast_poll_increase FIXME

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
   ref-no-jd	Reference board without HP/Mic jack detection
   3stack	D965 3stack
   5stack	D965 5stack + SPDIF
+  5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
   auto		BIOS setup (default)

Documentation/sound/alsa/Procfile.txt

@@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
 	When this value is greater than 1, the driver will show the
 	stack trace additionally.  This may help the debugging.
 
+	Since 2.6.30, this option also enables the hwptr check using
+	jiffies.  This detects spontaneous invalid pointer callback
+	values, but can be lead to too much corrections for a (mostly
+	buggy) hardware that doesn't give smooth pointer updates.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

MAINTAINERS

@@ -434,7 +434,7 @@ F:	arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
 P:	Thomas Dahlmann
-M:	thomas.dahlmann@amd.com
+M:	dahlmann.thomas@arcor.de
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
@@ -1132,17 +1132,17 @@ F:	fs/bfs/
 F:	include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:	Bryan Wu
-M:	cooloney@kernel.org
+P:	Mike Frysinger
+M:	vapier@gentoo.org
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:	Bryan Wu
-M:	cooloney@kernel.org
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P:	Michael Hennerich
+M:	michael.hennerich@analog.com
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/bfin_mac.*
@@ -1150,7 +1150,7 @@ F:	drivers/net/bfin_mac.*
 BLACKFIN RTC DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
@@ -1158,7 +1158,7 @@ F:	drivers/rtc/rtc-bfin.c
 BLACKFIN SERIAL DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/serial/bfin_5xx.c
@@ -1166,7 +1166,7 @@ F:	drivers/serial/bfin_5xx.c
 BLACKFIN WATCHDOG DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/watchdog/bfin_wdt.c
@@ -1174,7 +1174,7 @@ F:	drivers/watchdog/bfin_wdt.c
 BLACKFIN I2C TWI DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
@@ -1431,6 +1431,14 @@ P:	Russell King
 M:	linux@arm.linux.org.uk
 F:	include/linux/clk.h
 
+CISCO FCOE HBA DRIVER
+P:	Abhijeet Joglekar
+M:	abjoglek@cisco.com
+P:	Joe Eykholt
+M:	jeykholt@cisco.com
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1963,8 +1971,8 @@ F:	include/linux/edac.h
 
 EDAC-E752X
 P:	Mark Gross
-P:	Doug Thompson
 M:	mark.gross@intel.com
+P:	Doug Thompson
 M:	dougthompson@xmission.com
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
@@ -5589,6 +5597,14 @@ M:	ian@mnementh.co.uk
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
+TMPFS (SHMEM FILESYSTEM)
+P:	Hugh Dickins
+M:	hugh.dickins@tiscali.co.uk
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	include/linux/shmem_fs.h
+F:	mm/shmem.c
+
 TPM DEVICE DRIVER
 P:	Debora Velarde
 M:	debora@linux.vnet.ibm.com

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc6
-NAME = Vindictive Armadillo
+EXTRAVERSION = -rc7
+NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arm/Kconfig

@@ -273,6 +273,7 @@ config ARCH_EP93XX
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -976,10 +977,9 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default y
-	depends on FLATMEM
+	default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE

arch/arm/common/gic.c

@@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 }
 
 #ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
-	unsigned long map = *cpus_addr(cpumask);
+	unsigned long map = *cpus_addr(*mask);
 
 	/* this always happens on GIC0 */
 	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);

arch/arm/include/asm/flat.h

@@ -5,9 +5,6 @@
 #ifndef __ARM_FLAT_H__
 #define __ARM_FLAT_H__
 
-/* An odd number of words will be pushed after this alignment, so
-   deliberately misalign the value.  */
-#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/arm/include/asm/hardware/gic.h

@@ -36,7 +36,7 @@
 void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
 void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 #endif
 
 #endif

arch/arm/include/asm/smp.h

@@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 /*
  * Raise an IPI cross call on CPUs in callmap.
  */
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
+extern void smp_cross_call(const struct cpumask *mask);
 
 /*
  * Broadcast a clock event to other CPUs.
  */
-extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_timer_broadcast(const struct cpumask *mask);
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
@@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu);
 extern void platform_cpu_enable(unsigned int cpu);
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  * Local timer interrupt handling function (can be IPI'ed).

arch/arm/kernel/smp.c

@@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void)
 	per_cpu(cpu_data, cpu).idle = current;
 }
 
-static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
+static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
 {
 	unsigned long flags;
 	unsigned int cpu;
 
 	local_irq_save(flags);
 
-	for_each_cpu_mask(cpu, callmap) {
+	for_each_cpu(cpu, mask) {
 		struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
 
 		spin_lock(&ipi->lock);
@@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
 	/*
 	 * Call the platform specific cross-CPU call function.
 	 */
-	smp_cross_call(callmap);
+	smp_cross_call(mask);
 
 	local_irq_restore(flags);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
 void show_ipi_list(struct seq_file *p)
@@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
 
 void smp_send_reschedule(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
-void smp_send_timer(void)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_TIMER);
-}
-
-void smp_timer_broadcast(cpumask_t mask)
+void smp_timer_broadcast(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_TIMER);
 }
@@ -517,7 +510,7 @@ void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_CPU_STOP);
+	send_ipi_message(&mask, IPI_CPU_STOP);
 }
 
 /*
@@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier)
 	return -EINVAL;
 }
 
-static int
-on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
+static void
+on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+		const struct cpumask *mask)
 {
-	int ret = 0;
-
 	preempt_disable();
 
-	ret = smp_call_function_mask(mask, func, info, wait);
-	if (cpu_isset(smp_processor_id(), mask))
+	smp_call_function_many(mask, func, info, wait);
+	if (cpumask_test_cpu(smp_processor_id(), mask))
 		func(info);
 
 	preempt_enable();
-
-	return ret;
 }
 
 /**********************************************************************/
@@ -602,20 +592,17 @@ void flush_tlb_all(void)
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t mask = mm->cpu_vm_mask;
-
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
 	struct tlb_args ta;
 
 	ta.ta_vma = vma;
 	ta.ta_start = uaddr;
 
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 void flush_tlb_range(struct vm_area_struct *vma,
                      unsigned long start, unsigned long end)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
 	struct tlb_args ta;
 
 	ta.ta_vma = vma;
 	ta.ta_start = start;
 	ta.ta_end = end;
 
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)

arch/arm/mach-ep93xx/clock.c

@@ -21,15 +21,50 @@
 #include <asm/div64.h>
 #include <mach/hardware.h>
 
+
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+
 struct clk {
 	unsigned long	rate;
 	int		users;
+	int		sw_locked;
 	u32		enable_reg;
 	u32		enable_mask;
+
+	unsigned long	(*get_rate)(struct clk *clk);
 };
 
-static struct clk clk_uart = {
-	.rate		= 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart2 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart3 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
 static struct clk clk_f;
@@ -95,9 +130,9 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart),
-	INIT_CK("apb:uart2", NULL, &clk_uart),
-	INIT_CK("apb:uart3", NULL, &clk_uart),
+	INIT_CK("apb:uart1", NULL, &clk_uart1),
+	INIT_CK("apb:uart2", NULL, &clk_uart2),
+	INIT_CK("apb:uart3", NULL, &clk_uart3),
 	INIT_CK(NULL, "pll1", &clk_pll1),
 	INIT_CK(NULL, "fclk", &clk_f),
 	INIT_CK(NULL, "hclk", &clk_h),
@@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value | clk->enable_mask, clk->enable_reg);
 	}
 
@@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
 
+static unsigned long get_uart_rate(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
+	if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+		return EP93XX_EXT_CLK_RATE;
+	else
+		return EP93XX_EXT_CLK_RATE / 2;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
@@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = 14745600;
+	rate = EP93XX_EXT_CLK_RATE;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = 14745600;
+		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = 14745600;
+		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -159,7 +159,10 @@
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
 #define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)

arch/arm/mach-integrator/core.c

@@ -121,7 +121,7 @@ static struct clk uartclk = {
 	.rate	= 14745600,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,

arch/arm/mach-l7200/include/mach/sys-clock.h

@@ -18,7 +18,7 @@
 
 /* IO_START and IO_BASE are defined in hardware.h */
 
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF)  /* Physical address */
 #define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
 
 /* Define the interface to the SYS_CLOCK */

arch/arm/mach-omap2/clock24xx.c

@@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
@@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
+	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
 	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),

arch/arm/mach-omap2/clock34xx.c

@@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick,	CK_343X),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
@@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_343X),
-	CLK(NULL,	"dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck, CK_343X),
+	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
+	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_343X),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),

arch/arm/mach-omap2/clock34xx.h

@@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
 
 static struct clk gpio1_dbck = {
 	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
 
 static struct clk gpio6_dbck = {
 	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
 
 static struct clk gpio5_dbck = {
 	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
 
 static struct clk gpio4_dbck = {
 	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
 
 static struct clk gpio3_dbck = {
 	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
 
 static struct clk gpio2_dbck = {
 	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,

arch/arm/mach-omap2/devices.c

@@ -354,10 +354,12 @@ static void omap_init_mcspi(void)
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
-	platform_device_register(&omap2_mcspi3);
+	if (cpu_is_omap2430() || cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi3);
 #endif
 #ifdef CONFIG_ARCH_OMAP3
-	platform_device_register(&omap2_mcspi4);
+	if (cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi4);
 #endif
 }
 

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -409,7 +409,7 @@
 /* PM_PREPWSTST_CAM specific bits */
 
 /* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		(1 << 4)
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		4
 
 /* RM_RSTST_PER specific bits */
 

arch/arm/mach-omap2/usb-tusb6010.c

@@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
 	unsigned	sysclk_ps;
 	int		status;
 
-	if (!refclk_psec || sysclk_ps == 0)
+	if (!refclk_psec || fclk_ps == 0)
 		return -ENODEV;
 
 	sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;

arch/arm/mach-pxa/viper.c

@@ -46,6 +46,7 @@
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/i2c.h>
+#include <mach/regs-uart.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>

arch/arm/mach-realview/core.c

@@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq)
 {
 	u32 val;
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-	/*
-	 * The dummy clock device has to be registered before the main device
-	 * so that the latter will broadcast the clock events
-	 */
-	local_timer_setup();
-#endif
-
 	/* 
 	 * set clock frequency: 
 	 *	REALVIEW_REFCLK is 32KHz

arch/arm/mach-realview/include/mach/smp.h

@@ -15,16 +15,9 @@
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(cpumask_t callmap)
-{
-	gic_raise_softirq(callmap, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask)
 {
+	gic_raise_softirq(mask, 1);
 }
 
 #endif

arch/arm/mach-realview/localtimer.c

@@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void)
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 
 	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 200;
+	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_DUMMY;
+	clk->rating		= 400;
 	clk->mult               = 1;
 	clk->set_mode		= dummy_timer_set_mode;
 	clk->broadcast		= smp_timer_broadcast;

arch/arm/mach-realview/platsmp.c

@@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	trace_hardirqs_off();
 
-	/*
-	 * the primary core may have used a "cross call" soft interrupt
-	 * to get this processor out of WFI in the BootMonitor - make
-	 * sure that we are no longer being sent this soft interrupt
-	 */
-	smp_cross_call_done(cpumask_of_cpu(cpu));
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
@@ -136,7 +129,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Use smp_cross_call() for this, since there's little
 	 * point duplicating the code here
 	 */
-	smp_cross_call(cpumask_of_cpu(cpu));
+	smp_cross_call(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -224,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#ifdef CONFIG_LOCAL_TIMERS
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
 	/*
-	 * Enable the local timer for primary CPU. If the device is
-	 * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
-	 * realview_timer_init
+	 * Enable the local timer or broadcast device for the boot CPU.
 	 */
 	local_timer_setup();
 #endif

arch/arm/mach-s3c2410/mach-bast.c

@@ -588,8 +588,6 @@ static void __init bast_map_io(void)
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
 
-	s3c_i2c0_set_platdata(&bast_i2c_info);
-
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
@@ -602,6 +600,7 @@ static void __init bast_init(void)
 	sysdev_class_register(&bast_pm_sysclass);
 	sysdev_register(&bast_pm_sysdev);
 
+	s3c_i2c0_set_platdata(&bast_i2c_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 

arch/arm/mach-versatile/core.c

@@ -413,7 +413,7 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "dev:f1",
 		.clk		= &ref24_clk,

arch/arm/nwfpe/fpa11.h

@@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData,
 extern unsigned int DoubleCPDO(struct roundingData *roundData,
 			       const unsigned int opcode, FPREG * rFd);
 
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+				 const unsigned int opcode, FPREG * rFd);
+
 #endif

arch/arm/nwfpe/fpa11_cprt.c

@@ -27,10 +27,6 @@
 #include "fpmodule.inl"
 #include "softfloat.h"
 
-#ifdef CONFIG_FPE_NWFPE_XP
-extern flag floatx80_is_nan(floatx80);
-#endif
-
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
 

arch/arm/nwfpe/softfloat.h

@@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 );
 char floatx80_lt_quiet( floatx80, floatx80 );
 char floatx80_is_signaling_nan( floatx80 );
 
+extern flag floatx80_is_nan(floatx80);
+
 #endif
 
 static inline flag extractFloat32Sign(float32 a)

arch/arm/plat-omap/fb.c

@@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void)
 			config_invalid = 1;
 			return;
 		}
-		if (rg.paddr)
+		if (rg.paddr) {
 			reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
-		reserved += rg.size;
+			reserved += rg.size;
+		}
 		omapfb_config.mem_desc.region[i] = rg;
 		configured_regions++;
 	}

arch/arm/plat-omap/gpio.c

@@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 160)
+	if (cpu_is_omap34xx() && gpio < 192)
 		return 0;
 	return -1;
 }

arch/arm/plat-s3c/clock.c

@@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = {
 
 int s3c24xx_register_clock(struct clk *clk)
 {
-	clk->owner = THIS_MODULE;
-
 	if (clk->enable == NULL)
 		clk->enable = clk_null_enable;
 

arch/arm/plat-s3c24xx/dma.c

@@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
 
 EXPORT_SYMBOL(s3c2410_dma_getposition);
 
-static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
 {
 	return container_of(dev, struct s3c2410_dma_chan, dev);
 }

arch/arm/plat-s3c64xx/gpiolib.c

@@ -57,7 +57,7 @@
 #if 1
 #define gpio_dbg(x...) do { } while(0)
 #else
-#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
 #endif
 
 /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where

arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h

@@ -61,14 +61,14 @@
 #define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
 #define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
 
-#define S3C64XX_GPH8_MMC1_DATA6		(0x02 << 32)
-#define S3C64XX_GPH8_MMC2_DATA2		(0x03 << 32)
-#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 << 32)
-#define S3C64XX_GPH8_ADDR_CF2		(0x06 << 32)
-#define S3C64XX_GPH8_EINT_G6_8		(0x07 << 32)
-
-#define S3C64XX_GPH9_MMC1_DATA7		(0x02 << 36)
-#define S3C64XX_GPH9_MMC2_DATA3		(0x03 << 36)
-#define S3C64XX_GPH9_I2S_V40_DI		(0x05 << 36)
-#define S3C64XX_GPH9_EINT_G6_9		(0x07 << 36)
+#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
+#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
+#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
+#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
 
+#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
+#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
+#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
+#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
+#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)

arch/blackfin/include/asm/.gitignore

@@ -1 +0,0 @@
-+mach

arch/blackfin/include/asm/flat.h

@@ -10,7 +10,6 @@
 
 #include <asm/unaligned.h>
 
-#define	flat_stack_align(sp)	/* nothing needed */
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 

arch/blackfin/include/asm/unistd.h

@@ -378,8 +378,10 @@
 #define __NR_dup3		363
 #define __NR_pipe2		364
 #define __NR_inotify_init1	365
+#define __NR_preadv		366
+#define __NR_pwritev		367
 
-#define __NR_syscall		366
+#define __NR_syscall		368
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */

arch/blackfin/kernel/.gitignore

@@ -0,0 +1 @@
+vmlinux.lds

arch/blackfin/lib/strncmp.c

@@ -8,9 +8,8 @@
 
 #define strncmp __inline_strncmp
 #include <asm/string.h>
-#undef strncmp
-
 #include <linux/module.h>
+#undef strncmp
 
 int strncmp(const char *cs, const char *ct, size_t count)
 {

arch/blackfin/mach-common/entry.S

@@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table)
 	.long _sys_dup3
 	.long _sys_pipe2
 	.long _sys_inotify_init1	/* 365 */
+	.long _sys_preadv
+	.long _sys_pwritev
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall

arch/h8300/include/asm/flat.h

@@ -5,7 +5,6 @@
 #ifndef __H8300_FLAT_H__
 #define __H8300_FLAT_H__
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		1
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/m32r/include/asm/flat.h

@@ -12,7 +12,6 @@
 #ifndef __ASM_M32R_FLAT_H
 #define __ASM_M32R_FLAT_H
 
-#define	flat_stack_align(sp)		(*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_set_persistent(relval, p)		0

arch/m68k/include/asm/flat.h

@@ -5,7 +5,6 @@
 #ifndef __M68KNOMMU_FLAT_H__
 #define __M68KNOMMU_FLAT_H__
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/microblaze/configs/nommu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Mar 24 10:23:20 2009
+# Linux kernel version: 2.6.30-rc5
+# Mon May 11 09:01:02 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -80,6 +82,8 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
 # Exectuable file formats
@@ -180,7 +185,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -562,6 +569,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -601,8 +613,13 @@ CONFIG_CRAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_HEART_BEAT=y
@@ -777,6 +789,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -784,6 +797,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y

arch/microblaze/kernel/intc.c

@@ -137,8 +137,8 @@ void __init init_IRQ(void)
 
 	intr_type =
 		*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
-	if (intr_type >= (1 << nr_irq))
-		printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n");
+	if (intr_type >= (1 << (nr_irq + 1)))
+		printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
 
 #ifdef CONFIG_SELFMOD_INTC
 	selfmod_function((int *) arr_func, intc_baseaddr);

arch/mips/Makefile

@@ -473,12 +473,12 @@ endif
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
 ifdef CONFIG_SGI_IP28
-  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
-      $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+      $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
   endif
 endif
 core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
+cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 
 #

arch/mips/include/asm/uaccess.h

@@ -956,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
 	void __user * __cl_addr = (addr);				\
 	unsigned long __cl_size = (n);					\
 	if (__cl_size && access_ok(VERIFY_WRITE,			\
-		((unsigned long)(__cl_addr)), __cl_size))		\
+					__cl_addr, __cl_size))		\
 		__cl_size = __clear_user(__cl_addr, __cl_size);		\
 	__cl_size;							\
 })

arch/mips/mm/tlb-r3k.c

@@ -82,8 +82,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	int cpu = smp_processor_id();
 
 	if (cpu_context(cpu, mm) != 0) {
-		unsigned long flags;
-		int size;
+		unsigned long size, flags;
 
 #ifdef DEBUG_TLB
 		printk("[tlbrange<%lu,0x%08lx,0x%08lx>]",
@@ -121,8 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 #ifdef DEBUG_TLB
 	printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end);

arch/mips/mm/tlb-r4k.c

@@ -117,8 +117,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	int cpu = smp_processor_id();
 
 	if (cpu_context(cpu, mm) != 0) {
-		unsigned long flags;
-		int size;
+		unsigned long size, flags;
 
 		ENTER_CRITICAL(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
@@ -160,8 +159,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 	ENTER_CRITICAL(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;

arch/mips/mm/tlb-r8k.c

@@ -111,8 +111,7 @@ out_restore:
 /* Usable for KV1 addresses only! */
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	size = (size + 1) >> 1;

arch/mips/sgi-ip22/ip22-reset.c

@@ -148,7 +148,7 @@ static irqreturn_t panel_int(int irq, void *dev_id)
 
 	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
 		/* Wait until interrupt goes away */
-		disable_irq(SGI_PANEL_IRQ);
+		disable_irq_nosync(SGI_PANEL_IRQ);
 		init_timer(&debounce_timer);
 		debounce_timer.function = debounce;
 		debounce_timer.expires = jiffies + 5;

arch/mips/sgi-ip32/ip32-reset.c

@@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void)
 
 static void ip32_machine_power_off(void)
 {
-	volatile unsigned char reg_a, xctrl_a, xctrl_b;
+	unsigned char reg_a, xctrl_a, xctrl_b;
 
 	disable_irq(MACEISA_RTC_IRQ);
 	reg_a = CMOS_READ(RTC_REG_A);
@@ -91,9 +91,10 @@ static void blink_timeout(unsigned long data)
 
 static void debounce(unsigned long data)
 {
-	volatile unsigned char reg_a, reg_c, xctrl_a;
+	unsigned char reg_a, reg_c, xctrl_a;
 
 	reg_c = CMOS_READ(RTC_INTR_FLAGS);
+	reg_a = CMOS_READ(RTC_REG_A);
 	CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A);
 	wbflush();
 	xctrl_a = CMOS_READ(DS_B1_XCTRL4A);
@@ -137,7 +138,7 @@ static inline void ip32_power_button(void)
 
 static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
 {
-	volatile unsigned char reg_c;
+	unsigned char reg_c;
 
 	reg_c = CMOS_READ(RTC_INTR_FLAGS);
 	if (!(reg_c & RTC_IRQF)) {
@@ -145,7 +146,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
 			"%s: RTC IRQ without RTC_IRQF\n", __func__);
 	}
 	/* Wait until interrupt goes away */
-	disable_irq(MACEISA_RTC_IRQ);
+	disable_irq_nosync(MACEISA_RTC_IRQ);
 	init_timer(&debounce_timer);
 	debounce_timer.function = debounce;
 	debounce_timer.expires = jiffies + 50;

arch/powerpc/Kconfig

@@ -868,6 +868,18 @@ config TASK_SIZE
 	default "0x80000000" if PPC_PREP || PPC_8xx
 	default "0xc0000000"
 
+config CONSISTENT_SIZE_BOOL
+	bool "Set custom consistent memory pool size"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the size of the
+	  consistent memory pool.  This pool of virtual memory
+	  is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+	default "0x00200000" if NOT_COHERENT_CACHE
+
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
 	depends on ADVANCED_OPTIONS && 8xx

arch/powerpc/configs/ps3_defconfig

@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 09:28:45 2009
+# Linux kernel version: 2.6.30-rc5
+# Fri May 15 10:37:00 2009
 #
 CONFIG_PPC64=y
 
 #
 # Processor support
 #
+CONFIG_PPC_BOOK3S=y
 # CONFIG_POWER4_ONLY is not set
 CONFIG_POWER3=y
 CONFIG_POWER4=y
@@ -55,9 +56,11 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +75,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -88,8 +92,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -99,6 +102,9 @@ CONFIG_NAMESPACES=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -107,6 +113,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -138,6 +145,7 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -150,7 +158,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -172,7 +179,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
@@ -209,6 +215,7 @@ CONFIG_SPU_FS_64K_LS=y
 # CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -279,11 +286,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
@@ -316,7 +326,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -389,6 +398,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -396,6 +406,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -419,11 +430,9 @@ CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 # CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 # CONFIG_WIRELESS_EXT_SYSFS is not set
@@ -602,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
@@ -616,6 +626,7 @@ CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_UEVENT is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -625,6 +636,8 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -646,12 +659,13 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
 CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
@@ -673,6 +687,7 @@ CONFIG_USB_PEGASUS=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 # CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
@@ -724,28 +739,7 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
@@ -864,6 +858,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=9
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -934,15 +929,17 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-# CONFIG_HID_COMPAT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
 # CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
 # CONFIG_HID_MONTEREY is not set
@@ -950,7 +947,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
 # CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
+CONFIG_HID_SONY=m
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_GREENASIA_FF is not set
 # CONFIG_HID_TOPSEED is not set
@@ -1012,11 +1009,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1058,7 +1055,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1074,6 +1070,7 @@ CONFIG_USB_STORAGE=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1113,8 +1110,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_PPC=m
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_PS3=m
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1125,6 +1124,7 @@ CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1160,6 +1160,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1211,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1223,7 +1229,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1283,6 +1288,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1296,15 +1302,16 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1322,6 +1329,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1357,12 +1367,15 @@ CONFIG_DEBUG_LIST=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1371,18 +1384,21 @@ CONFIG_TRACING=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1415,10 +1431,12 @@ CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1487,6 +1505,7 @@ CONFIG_CRYPTO_SALSA20=m
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
 
 #

arch/powerpc/include/asm/dma-mapping.h

@@ -26,7 +26,9 @@
  * allocate the space "normally" and use the cache management functions
  * to ensure it is consistent.
  */
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+struct device;
+extern void *__dma_alloc_coherent(struct device *dev, size_t size,
+				  dma_addr_t *handle, gfp_t gfp);
 extern void __dma_free_coherent(size_t size, void *vaddr);
 extern void __dma_sync(void *vaddr, size_t size, int direction);
 extern void __dma_sync_page(struct page *page, unsigned long offset,
@@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset,
  * Cache coherent cores.
  */
 
-#define __dma_alloc_coherent(gfp, size, handle)	NULL
+#define __dma_alloc_coherent(dev, gfp, size, handle)	NULL
 #define __dma_free_coherent(size, addr)		((void)0)
 #define __dma_sync(addr, size, rw)		((void)0)
 #define __dma_sync_page(pg, off, sz, rw)	((void)0)

arch/powerpc/include/asm/fixmap.h

@@ -14,8 +14,6 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-extern unsigned long FIXADDR_TOP;
-
 #ifndef __ASSEMBLY__
 #include <linux/kernel.h>
 #include <asm/page.h>
@@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP;
 #include <asm/kmap_types.h>
 #endif
 
+#define FIXADDR_TOP	((unsigned long)(-PAGE_SIZE))
+
 /*
  * Here we define all the compile-time 'special' virtual
  * addresses. The point is to have a constant address at

arch/powerpc/include/asm/pgtable-ppc32.h

@@ -10,7 +10,7 @@
 
 extern unsigned long va_to_phys(unsigned long address);
 extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
+extern unsigned long ioremap_bot;
 
 #ifdef CONFIG_44x
 extern int icache_44x_need_flush;
@@ -55,9 +55,31 @@ extern int icache_44x_need_flush;
 #define pgd_ERROR(e) \
 	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
 
+/*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP	PKMAP_BASE
+#else
+#define KVIRT_TOP	(0xfe000000UL)	/* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP	((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP	KVIRT_TOP
+#endif
+
 /*
  * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
+ * current 16MB value just means that there will be a 64MB "hole" after the
  * physical memory until the kernel virtual memory starts.  That means that
  * any out-of-bounds memory accesses will hopefully be caught.
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced

arch/powerpc/kernel/dma.c

@@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 {
 	void *ret;
 #ifdef CONFIG_NOT_COHERENT_CACHE
-	ret = __dma_alloc_coherent(size, dma_handle, flag);
+	ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
 	if (ret == NULL)
 		return NULL;
 	*dma_handle += get_dma_direct_offset(dev);

arch/powerpc/kernel/ftrace.c

@@ -157,7 +157,7 @@ __ftrace_make_nop(struct module *mod,
 	 * 0xe8, 0x4c, 0x00, 0x28,    ld      r2,40(r12)
 	 */
 
-	pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
+	pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
 
 	/* Find where the trampoline jumps to */
 	if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -165,7 +165,7 @@ __ftrace_make_nop(struct module *mod,
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x", jmp[0], jmp[1]);
 
 	/* verify that this is what we expect it to be */
 	if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
@@ -181,18 +181,18 @@ __ftrace_make_nop(struct module *mod,
 	offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
 		(int)((short)jmp[1]);
 
-	pr_debug(" %x ", offset);
+	pr_devel(" %x ", offset);
 
 	/* get the address this jumps too */
 	tramp = mod->arch.toc + offset + 32;
-	pr_debug("toc: %lx", tramp);
+	pr_devel("toc: %lx", tramp);
 
 	if (probe_kernel_read(jmp, (void *)tramp, 8)) {
 		printk(KERN_ERR "Failed to read %lx\n", tramp);
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x\n", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
 
 	ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
 
@@ -269,7 +269,7 @@ __ftrace_make_nop(struct module *mod,
 	 *  0x4e, 0x80, 0x04, 0x20  bctr
 	 */
 
-	pr_debug("ip:%lx jumps to %lx", ip, tramp);
+	pr_devel("ip:%lx jumps to %lx", ip, tramp);
 
 	/* Find where the trampoline jumps to */
 	if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -277,7 +277,7 @@ __ftrace_make_nop(struct module *mod,
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x ", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x ", jmp[0], jmp[1]);
 
 	/* verify that this is what we expect it to be */
 	if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
@@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod,
 	if (tramp & 0x8000)
 		tramp -= 0x10000;
 
-	pr_debug(" %lx ", tramp);
+	pr_devel(" %lx ", tramp);
 
 	if (tramp != addr) {
 		printk(KERN_ERR
@@ -402,7 +402,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	/* ld r2,40(r1) */
 	op[1] = 0xe8410028;
 
-	pr_debug("write to %lx\n", rec->ip);
+	pr_devel("write to %lx\n", rec->ip);
 
 	if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
 		return -EPERM;
@@ -442,7 +442,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 		return -EINVAL;
 	}
 
-	pr_debug("write to %lx\n", rec->ip);
+	pr_devel("write to %lx\n", rec->ip);
 
 	if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
 		return -EPERM;
@@ -594,7 +594,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 			PPC_LONG "2b,4b\n"
 		".previous"
 
-		: [old] "=r" (old), [faulted] "=r" (faulted)
+		: [old] "=&r" (old), [faulted] "=r" (faulted)
 		: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
 		: "memory"
 	);

arch/powerpc/kernel/vmlinux.lds.S

@@ -264,6 +264,7 @@ SECTIONS
 		*(.data.page_aligned)
 	}
 
+	. = ALIGN(L1_CACHE_BYTES);
 	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
 		*(.data.cacheline_aligned)
 	}

arch/powerpc/lib/Makefile

@@ -18,7 +18,6 @@ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
 obj-$(CONFIG_XMON)	+= sstep.o
 obj-$(CONFIG_KPROBES)	+= sstep.o
-obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-noncoherent.o
 
 ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o

arch/powerpc/lib/dma-noncoherent.c

@@ -1,237 +0,0 @@
-/*
- *  PowerPC version derived from arch/arm/mm/consistent.c
- *    Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
- *
- *  Copyright (C) 2000 Russell King
- *
- * Consistent memory allocators.  Used for DMA devices that want to
- * share uncached memory with the processor core.  The function return
- * is the virtual address and 'dma_handle' is the physical address.
- * Mostly stolen from the ARM port, with some changes for PowerPC.
- *						-- Dan
- *
- * Reorganized to get rid of the arch-specific consistent_* functions
- * and provide non-coherent implementations for the DMA API. -Matt
- *
- * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
- * implementation. This is pulled straight from ARM and barely
- * modified. -Matt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-#include <linux/vmalloc.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	struct page *page;
-	unsigned long order;
-	int i;
-	unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
-	unsigned int array_size = nr_pages * sizeof(struct page *);
-	struct page **pages;
-	struct page *end;
-	u64 mask = 0x00ffffff, limit; /* ISA default */
-	struct vm_struct *area;
-
-	BUG_ON(!mem_init_done);
-	size = PAGE_ALIGN(size);
-	limit = (mask + 1) & ~mask;
-	if (limit && size >= limit) {
-		printk(KERN_WARNING "coherent allocation too big (requested "
-				"%#x mask %#Lx)\n", size, mask);
-		return NULL;
-	}
-
-	order = get_order(size);
-
-	if (mask != 0xffffffff)
-		gfp |= GFP_DMA;
-
-	page = alloc_pages(gfp, order);
-	if (!page)
-		goto no_page;
-
-	end = page + (1 << order);
-
-	/*
-	 * Invalidate any data that might be lurking in the
-	 * kernel direct-mapped region for device DMA.
-	 */
-	{
-		unsigned long kaddr = (unsigned long)page_address(page);
-		memset(page_address(page), 0, size);
-		flush_dcache_range(kaddr, kaddr + size);
-	}
-
-	split_page(page, order);
-
-	/*
-	 * Set the "dma handle"
-	 */
-	*handle = page_to_phys(page);
-
-	area = get_vm_area_caller(size, VM_IOREMAP,
-			__builtin_return_address(1));
-	if (!area)
-		goto out_free_pages;
-
-	if (array_size > PAGE_SIZE) {
-		pages = vmalloc(array_size);
-		area->flags |= VM_VPAGES;
-	} else {
-		pages = kmalloc(array_size, GFP_KERNEL);
-	}
-	if (!pages)
-		goto out_free_area;
-
-	area->pages = pages;
-	area->nr_pages = nr_pages;
-
-	for (i = 0; i < nr_pages; i++)
-		pages[i] = page + i;
-
-	if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
-		goto out_unmap;
-
-	/*
-	 * Free the otherwise unused pages.
-	 */
-	page += nr_pages;
-	while (page < end) {
-		__free_page(page);
-		page++;
-	}
-
-	return area->addr;
-out_unmap:
-	vunmap(area->addr);
-	if (array_size > PAGE_SIZE)
-		vfree(pages);
-	else
-		kfree(pages);
-	goto out_free_pages;
-out_free_area:
-	free_vm_area(area);
-out_free_pages:
-	if (page)
-		__free_pages(page, order);
-no_page:
-	return NULL;
-}
-EXPORT_SYMBOL(__dma_alloc_coherent);
-
-/*
- * free a page as defined by the above mapping.
- */
-void __dma_free_coherent(size_t size, void *vaddr)
-{
-	vfree(vaddr);
-
-}
-EXPORT_SYMBOL(__dma_free_coherent);
-
-/*
- * make an area consistent.
- */
-void __dma_sync(void *vaddr, size_t size, int direction)
-{
-	unsigned long start = (unsigned long)vaddr;
-	unsigned long end   = start + size;
-
-	switch (direction) {
-	case DMA_NONE:
-		BUG();
-	case DMA_FROM_DEVICE:
-		/*
-		 * invalidate only when cache-line aligned otherwise there is
-		 * the potential for discarding uncommitted data from the cache
-		 */
-		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
-			flush_dcache_range(start, end);
-		else
-			invalidate_dcache_range(start, end);
-		break;
-	case DMA_TO_DEVICE:		/* writeback only */
-		clean_dcache_range(start, end);
-		break;
-	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
-		flush_dcache_range(start, end);
-		break;
-	}
-}
-EXPORT_SYMBOL(__dma_sync);
-
-#ifdef CONFIG_HIGHMEM
-/*
- * __dma_sync_page() implementation for systems using highmem.
- * In this case, each page of a buffer must be kmapped/kunmapped
- * in order to have a virtual address for __dma_sync(). This must
- * not sleep so kmap_atomic()/kunmap_atomic() are used.
- *
- * Note: yes, it is possible and correct to have a buffer extend
- * beyond the first page.
- */
-static inline void __dma_sync_page_highmem(struct page *page,
-		unsigned long offset, size_t size, int direction)
-{
-	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
-	size_t cur_size = seg_size;
-	unsigned long flags, start, seg_offset = offset;
-	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
-	int seg_nr = 0;
-
-	local_irq_save(flags);
-
-	do {
-		start = (unsigned long)kmap_atomic(page + seg_nr,
-				KM_PPC_SYNC_PAGE) + seg_offset;
-
-		/* Sync this buffer segment */
-		__dma_sync((void *)start, seg_size, direction);
-		kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
-		seg_nr++;
-
-		/* Calculate next buffer segment size */
-		seg_size = min((size_t)PAGE_SIZE, size - cur_size);
-
-		/* Add the segment size to our running total */
-		cur_size += seg_size;
-		seg_offset = 0;
-	} while (seg_nr < nr_segs);
-
-	local_irq_restore(flags);
-}
-#endif /* CONFIG_HIGHMEM */
-
-/*
- * __dma_sync_page makes memory consistent. identical to __dma_sync, but
- * takes a struct page instead of a virtual address
- */
-void __dma_sync_page(struct page *page, unsigned long offset,
-	size_t size, int direction)
-{
-#ifdef CONFIG_HIGHMEM
-	__dma_sync_page_highmem(page, offset, size, direction);
-#else
-	unsigned long start = (unsigned long)page_address(page) + offset;
-	__dma_sync((void *)start, size, direction);
-#endif
-}
-EXPORT_SYMBOL(__dma_sync_page);

arch/powerpc/mm/Makefile

@@ -26,3 +26,4 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
 obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
+obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o

arch/powerpc/mm/dma-noncoherent.c

@@ -0,0 +1,400 @@
+/*
+ *  PowerPC version derived from arch/arm/mm/consistent.c
+ *    Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators.  Used for DMA devices that want to
+ * share uncached memory with the processor core.  The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ *						-- Dan
+ *
+ * Reorganized to get rid of the arch-specific consistent_* functions
+ * and provide non-coherent implementations for the DMA API. -Matt
+ *
+ * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
+ * implementation. This is pulled straight from ARM and barely
+ * modified. -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/tlbflush.h>
+
+#include "mmu_decl.h"
+
+/*
+ * This address range defaults to a value that is safe for all
+ * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
+ * can be further configured for specific applications under
+ * the "Advanced Setup" menu. -Matt
+ */
+#define CONSISTENT_BASE		(IOREMAP_TOP)
+#define CONSISTENT_END 		(CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE)
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vm_region	region;
+ *    unsigned long	flags;
+ *    struct page	**pages;
+ *    unsigned int	nr_pages;
+ *    unsigned long	phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ *  struct vm_region vmalloc_head = {
+ *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *	.vm_start	= VMALLOC_START,
+ *	.vm_end		= VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct ppc_vm_region {
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+};
+
+static struct ppc_vm_region consistent_head = {
+	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
+	.vm_start	= CONSISTENT_BASE,
+	.vm_end		= CONSISTENT_END,
+};
+
+static struct ppc_vm_region *
+ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
+{
+	unsigned long addr = head->vm_start, end = head->vm_end - size;
+	unsigned long flags;
+	struct ppc_vm_region *c, *new;
+
+	new = kmalloc(sizeof(struct ppc_vm_region), gfp);
+	if (!new)
+		goto out;
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if ((addr + size) < addr)
+			goto nospc;
+		if ((addr + size) <= c->vm_start)
+			goto found;
+		addr = c->vm_end;
+		if (addr > end)
+			goto nospc;
+	}
+
+ found:
+	/*
+	 * Insert this entry _before_ the one we found.
+	 */
+	list_add_tail(&new->vm_list, &c->vm_list);
+	new->vm_start = addr;
+	new->vm_end = addr + size;
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	return new;
+
+ nospc:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	kfree(new);
+ out:
+	return NULL;
+}
+
+static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
+{
+	struct ppc_vm_region *c;
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if (c->vm_start == addr)
+			goto out;
+	}
+	c = NULL;
+ out:
+	return c;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	struct page *page;
+	struct ppc_vm_region *c;
+	unsigned long order;
+	u64 mask = ISA_DMA_THRESHOLD, limit;
+
+	if (dev) {
+		mask = dev->coherent_dma_mask;
+
+		/*
+		 * Sanity check the DMA mask - it must be non-zero, and
+		 * must be able to be satisfied by a DMA allocation.
+		 */
+		if (mask == 0) {
+			dev_warn(dev, "coherent DMA mask is unset\n");
+			goto no_page;
+		}
+
+		if ((~mask) & ISA_DMA_THRESHOLD) {
+			dev_warn(dev, "coherent DMA mask %#llx is smaller "
+				 "than system GFP_DMA mask %#llx\n",
+				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+			goto no_page;
+		}
+	}
+
+
+	size = PAGE_ALIGN(size);
+	limit = (mask + 1) & ~mask;
+	if ((limit && size >= limit) ||
+	    size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+		printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
+		       size, mask);
+		return NULL;
+	}
+
+	order = get_order(size);
+
+	/* Might be useful if we ever have a real legacy DMA zone... */
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		goto no_page;
+
+	/*
+	 * Invalidate any data that might be lurking in the
+	 * kernel direct-mapped region for device DMA.
+	 */
+	{
+		unsigned long kaddr = (unsigned long)page_address(page);
+		memset(page_address(page), 0, size);
+		flush_dcache_range(kaddr, kaddr + size);
+	}
+
+	/*
+	 * Allocate a virtual address in the consistent mapping region.
+	 */
+	c = ppc_vm_region_alloc(&consistent_head, size,
+			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+	if (c) {
+		unsigned long vaddr = c->vm_start;
+		struct page *end = page + (1 << order);
+
+		split_page(page, order);
+
+		/*
+		 * Set the "dma handle"
+		 */
+		*handle = page_to_phys(page);
+
+		do {
+			SetPageReserved(page);
+			map_page(vaddr, page_to_phys(page),
+				 pgprot_noncached(PAGE_KERNEL));
+			page++;
+			vaddr += PAGE_SIZE;
+		} while (size -= PAGE_SIZE);
+
+		/*
+		 * Free the otherwise unused pages.
+		 */
+		while (page < end) {
+			__free_page(page);
+			page++;
+		}
+
+		return (void *)c->vm_start;
+	}
+
+	if (page)
+		__free_pages(page, order);
+ no_page:
+	return NULL;
+}
+EXPORT_SYMBOL(__dma_alloc_coherent);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void __dma_free_coherent(size_t size, void *vaddr)
+{
+	struct ppc_vm_region *c;
+	unsigned long flags, addr;
+	
+	size = PAGE_ALIGN(size);
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
+	if (!c)
+		goto no_area;
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	addr = c->vm_start;
+	do {
+		pte_t *ptep;
+		unsigned long pfn;
+
+		ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr),
+							       addr),
+						    addr),
+					 addr);
+		if (!pte_none(*ptep) && pte_present(*ptep)) {
+			pfn = pte_pfn(*ptep);
+			pte_clear(&init_mm, addr, ptep);
+			if (pfn_valid(pfn)) {
+				struct page *page = pfn_to_page(pfn);
+
+				ClearPageReserved(page);
+				__free_page(page);
+			}
+		}
+		addr += PAGE_SIZE;
+	} while (size -= PAGE_SIZE);
+
+	flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+	list_del(&c->vm_list);
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
+	kfree(c);
+	return;
+
+ no_area:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+	       __func__, vaddr);
+	dump_stack();
+}
+EXPORT_SYMBOL(__dma_free_coherent);
+
+/*
+ * make an area consistent.
+ */
+void __dma_sync(void *vaddr, size_t size, int direction)
+{
+	unsigned long start = (unsigned long)vaddr;
+	unsigned long end   = start + size;
+
+	switch (direction) {
+	case DMA_NONE:
+		BUG();
+	case DMA_FROM_DEVICE:
+		/*
+		 * invalidate only when cache-line aligned otherwise there is
+		 * the potential for discarding uncommitted data from the cache
+		 */
+		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+			flush_dcache_range(start, end);
+		else
+			invalidate_dcache_range(start, end);
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		clean_dcache_range(start, end);
+		break;
+	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		flush_dcache_range(start, end);
+		break;
+	}
+}
+EXPORT_SYMBOL(__dma_sync);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * __dma_sync_page() implementation for systems using highmem.
+ * In this case, each page of a buffer must be kmapped/kunmapped
+ * in order to have a virtual address for __dma_sync(). This must
+ * not sleep so kmap_atomic()/kunmap_atomic() are used.
+ *
+ * Note: yes, it is possible and correct to have a buffer extend
+ * beyond the first page.
+ */
+static inline void __dma_sync_page_highmem(struct page *page,
+		unsigned long offset, size_t size, int direction)
+{
+	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
+	size_t cur_size = seg_size;
+	unsigned long flags, start, seg_offset = offset;
+	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
+	int seg_nr = 0;
+
+	local_irq_save(flags);
+
+	do {
+		start = (unsigned long)kmap_atomic(page + seg_nr,
+				KM_PPC_SYNC_PAGE) + seg_offset;
+
+		/* Sync this buffer segment */
+		__dma_sync((void *)start, seg_size, direction);
+		kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+		seg_nr++;
+
+		/* Calculate next buffer segment size */
+		seg_size = min((size_t)PAGE_SIZE, size - cur_size);
+
+		/* Add the segment size to our running total */
+		cur_size += seg_size;
+		seg_offset = 0;
+	} while (seg_nr < nr_segs);
+
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __dma_sync_page makes memory consistent. identical to __dma_sync, but
+ * takes a struct page instead of a virtual address
+ */
+void __dma_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction)
+{
+#ifdef CONFIG_HIGHMEM
+	__dma_sync_page_highmem(page, offset, size, direction);
+#else
+	unsigned long start = (unsigned long)page_address(page) + offset;
+	__dma_sync((void *)start, size, direction);
+#endif
+}
+EXPORT_SYMBOL(__dma_sync_page);

arch/powerpc/mm/init_32.c

@@ -168,12 +168,8 @@ void __init MMU_init(void)
 		ppc_md.progress("MMU:mapin", 0x301);
 	mapin_ram();
 
-#ifdef CONFIG_HIGHMEM
-	ioremap_base = PKMAP_BASE;
-#else
-	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
-	ioremap_bot = ioremap_base;
+	/* Initialize early top-down ioremap allocator */
+	ioremap_bot = IOREMAP_TOP;
 
 	/* Map in I/O resources */
 	if (ppc_md.progress)

arch/powerpc/mm/mem.c

@@ -380,6 +380,23 @@ void __init mem_init(void)
 		bsssize >> 10,
 		initsize >> 10);
 
+#ifdef CONFIG_PPC32
+	pr_info("Kernel virtual memory layout:\n");
+	pr_info("  * 0x%08lx..0x%08lx  : fixmap\n", FIXADDR_START, FIXADDR_TOP);
+#ifdef CONFIG_HIGHMEM
+	pr_info("  * 0x%08lx..0x%08lx  : highmem PTEs\n",
+		PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
+#endif /* CONFIG_HIGHMEM */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	pr_info("  * 0x%08lx..0x%08lx  : consistent mem\n",
+		IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE);
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+	pr_info("  * 0x%08lx..0x%08lx  : early ioremap\n",
+		ioremap_bot, IOREMAP_TOP);
+	pr_info("  * 0x%08lx..0x%08lx  : vmalloc & ioremap\n",
+		VMALLOC_START, VMALLOC_END);
+#endif /* CONFIG_PPC32 */
+
 	mem_init_done = 1;
 }
 

arch/powerpc/mm/mmu_context_nohash.c

@@ -127,12 +127,12 @@ static unsigned int steal_context_up(unsigned int id)
 
 	pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
 
-	/* Mark this mm has having no context anymore */
-	mm->context.id = MMU_NO_CONTEXT;
-
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
 
+	/* Mark this mm has having no context anymore */
+	mm->context.id = MMU_NO_CONTEXT;
+
 	/* XXX This clear should ultimately be part of local_flush_tlb_mm */
 	__clear_bit(id, stale_map[cpu]);
 

arch/powerpc/mm/pgtable.c

@@ -219,7 +219,8 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
 		entry = do_dcache_icache_coherency(entry);
 	changed = !pte_same(*(ptep), entry);
 	if (changed) {
-		assert_pte_locked(vma->vm_mm, address);
+		if (!(vma->vm_flags & VM_HUGETLB))
+			assert_pte_locked(vma->vm_mm, address);
 		__ptep_set_access_flags(ptep, entry);
 		flush_tlb_page_nohash(vma, address);
 	}

arch/powerpc/mm/pgtable_32.c

@@ -399,8 +399,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
 static int fixmaps;
-unsigned long FIXADDR_TOP = (-PAGE_SIZE);
-EXPORT_SYMBOL(FIXADDR_TOP);
 
 void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
 {

arch/powerpc/platforms/maple/pci.c

@@ -592,3 +592,17 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
 	}
 	return irq;
 }
+
+static void __devinit quirk_ipr_msi(struct pci_dev *dev)
+{
+	/* Something prevents MSIs from the IPR from working on Bimini,
+	 * and the driver has no smarts to recover. So disable MSI
+	 * on it for now. */
+
+	if (machine_is(maple)) {
+		dev->no_msi = 1;
+		dev_info(&dev->dev, "Quirk disabled MSI\n");
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
+			quirk_ipr_msi);

arch/sh/boards/board-ap325rxa.c

@@ -263,6 +263,9 @@ static int camera_probe(void)
 	struct i2c_msg msg;
 	int ret;
 
+	if (!a)
+		return -ENODEV;
+
 	camera_power(1);
 	msg.addr = 0x6e;
 	msg.buf = camera_ncm03j_magic;

arch/sh/include/asm/flat.h

@@ -12,7 +12,6 @@
 #ifndef __ASM_SH_FLAT_H
 #define __ASM_SH_FLAT_H
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/x86/Kconfig

@@ -498,6 +498,19 @@ config PARAVIRT
 	  over full virtualization.  However, when run without a hypervisor
 	  the kernel is theoretically slower and slightly larger.
 
+config PARAVIRT_SPINLOCKS
+	bool "Paravirtualization layer for spinlocks"
+	depends on PARAVIRT && SMP && EXPERIMENTAL
+	---help---
+	  Paravirtualized spinlocks allow a pvops backend to replace the
+	  spinlock implementation with something virtualization-friendly
+	  (for example, block the virtual CPU rather than spinning).
+
+	  Unfortunately the downside is an up to 5% performance hit on
+	  native kernels, with various workloads.
+
+	  If you are unsure how to answer this question, answer N.
+
 config PARAVIRT_CLOCK
 	bool
 	default n

arch/x86/boot/compressed/relocs.c

@@ -504,8 +504,11 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
 			if (sym->st_shndx == SHN_ABS) {
 				continue;
 			}
-			if (r_type == R_386_PC32) {
-				/* PC relative relocations don't need to be adjusted */
+			if (r_type == R_386_NONE || r_type == R_386_PC32) {
+				/*
+				 * NONE can be ignored and and PC relative
+				 * relocations don't need to be adjusted.
+				 */
 			}
 			else if (r_type == R_386_32) {
 				/* Visit relocations that need to be adjusted */

arch/x86/boot/memory.c

@@ -17,11 +17,6 @@
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
-struct e820_ext_entry {
-	struct e820entry std;
-	u32 ext_flags;
-} __attribute__((packed));
-
 static int detect_memory_e820(void)
 {
 	int count = 0;
@@ -29,13 +24,21 @@ static int detect_memory_e820(void)
 	u32 size, id, edi;
 	u8 err;
 	struct e820entry *desc = boot_params.e820_map;
-	static struct e820_ext_entry buf; /* static so it is zeroed */
+	static struct e820entry buf; /* static so it is zeroed */
 
 	/*
-	 * Set this here so that if the BIOS doesn't change this field
-	 * but still doesn't change %ecx, we're still okay...
+	 * Note: at least one BIOS is known which assumes that the
+	 * buffer pointed to by one e820 call is the same one as
+	 * the previous call, and only changes modified fields.  Therefore,
+	 * we use a temporary buffer and copy the results entry by entry.
+	 *
+	 * This routine deliberately does not try to account for
+	 * ACPI 3+ extended attributes.  This is because there are
+	 * BIOSes in the field which report zero for the valid bit for
+	 * all ranges, and we don't currently make any use of the
+	 * other attribute bits.  Revisit this if we see the extended
+	 * attribute bits deployed in a meaningful way in the future.
 	 */
-	buf.ext_flags = 1;
 
 	do {
 		size = sizeof buf;
@@ -66,13 +69,7 @@ static int detect_memory_e820(void)
 			break;
 		}
 
-		/* ACPI 3.0 added the extended flags support.  If bit 0
-		   in the extended flags is zero, we're supposed to simply
-		   ignore the entry -- a backwards incompatible change! */
-		if (size > 20 && !(buf.ext_flags & 1))
-			continue;
-
-		*desc++ = buf.std;
+		*desc++ = buf;
 		count++;
 	} while (next && count < ARRAY_SIZE(boot_params.e820_map));
 

arch/x86/include/asm/paravirt.h

@@ -1443,7 +1443,7 @@ u64 _paravirt_ident_64(u64);
 
 #define paravirt_nop	((void *)_paravirt_nop)
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 
 static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
 {

arch/x86/include/asm/percpu.h

@@ -82,22 +82,22 @@ do {							\
 	case 1:						\
 		asm(op "b %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "qi" ((T__)(val)));		\
 		break;					\
 	case 2:						\
 		asm(op "w %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "ri" ((T__)(val)));		\
 		break;					\
 	case 4:						\
 		asm(op "l %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "ri" ((T__)(val)));		\
 		break;					\
 	case 8:						\
 		asm(op "q %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "re" ((T__)val));			\
+		    : "re" ((T__)(val)));		\
 		break;					\
 	default: __bad_percpu_size();			\
 	}						\
@@ -109,7 +109,7 @@ do {							\
 	switch (sizeof(var)) {				\
 	case 1:						\
 		asm(op "b "__percpu_arg(1)",%0"		\
-		    : "=r" (ret__)			\
+		    : "=q" (ret__)			\
 		    : "m" (var));			\
 		break;					\
 	case 2:						\

arch/x86/include/asm/ptrace.h

@@ -187,14 +187,15 @@ static inline int v8086_mode(struct pt_regs *regs)
 
 /*
  * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps.  So regs will be the current sp.
+ * when it traps.  The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
  *
  * This is valid only for kernel mode traps.
  */
-static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 {
 #ifdef CONFIG_X86_32
-	return (unsigned long)regs;
+	return (unsigned long)(&regs->sp);
 #else
 	return regs->sp;
 #endif

arch/x86/include/asm/spinlock.h

@@ -172,7 +172,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 	return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
 }
 
-#ifndef CONFIG_PARAVIRT
+#ifndef CONFIG_PARAVIRT_SPINLOCKS
 
 static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
 {
@@ -206,7 +206,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
 	__raw_spin_lock(lock);
 }
 
-#endif
+#endif	/* CONFIG_PARAVIRT_SPINLOCKS */
 
 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
 {

arch/x86/kernel/Makefile

@@ -89,7 +89,8 @@ obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
 obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
 obj-$(CONFIG_KVM_GUEST)		+= kvm.o
 obj-$(CONFIG_KVM_CLOCK)		+= kvmclock.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o
 obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o

arch/x86/kernel/apic/es7000_32.c

@@ -254,7 +254,7 @@ static int parse_unisys_oem(char *oemptr)
 }
 
 #ifdef CONFIG_ACPI
-static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
+static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
 	struct acpi_table_header *header = NULL;
 	struct es7000_oem_table *table;
@@ -285,7 +285,7 @@ static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
 	return 0;
 }
 
-static void unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
 {
 	if (!oem_addr)
 		return;
@@ -306,7 +306,7 @@ static int es7000_check_dsdt(void)
 static int es7000_acpi_ret;
 
 /* Hook from generic ACPI tables.c */
-static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	unsigned long oem_addr = 0;
 	int check_dsdt;
@@ -717,7 +717,7 @@ struct apic apic_es7000_cluster = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
 
-struct apic apic_es7000 = {
+struct apic __refdata apic_es7000 = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,

arch/x86/kernel/cpu/common.c

@@ -115,6 +115,13 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 } };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
+static int __init x86_xsave_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
+	return 1;
+}
+__setup("noxsave", x86_xsave_setup);
+
 #ifdef CONFIG_X86_32
 static int cachesize_override __cpuinitdata = -1;
 static int disable_x86_serial_nr __cpuinitdata = 1;

arch/x86/kernel/cpu/cpufreq/p4-clockmod.c

@@ -168,6 +168,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 		case 0x0E: /* Core */
 		case 0x0F: /* Core Duo */
 		case 0x16: /* Celeron Core */
+		case 0x1C: /* Atom */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
 		case 0x0D: /* Pentium M (Dothan) */

arch/x86/kernel/cpu/cpufreq/powernow-k7.c

@@ -168,10 +168,12 @@ static int check_powernow(void)
 	return 1;
 }
 
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
 static void invalidate_entry(unsigned int entry)
 {
 	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
 }
+#endif
 
 static int get_ranges(unsigned char *pst)
 {

arch/x86/kernel/cpu/cpufreq/powernow-k8.c

@@ -649,6 +649,20 @@ static void print_basics(struct powernow_k8_data *data)
 				data->batps);
 }
 
+static u32 freq_from_fid_did(u32 fid, u32 did)
+{
+	u32 mhz = 0;
+
+	if (boot_cpu_data.x86 == 0x10)
+		mhz = (100 * (fid + 0x10)) >> did;
+	else if (boot_cpu_data.x86 == 0x11)
+		mhz = (100 * (fid + 8)) >> did;
+	else
+		BUG();
+
+	return mhz * 1000;
+}
+
 static int fill_powernow_table(struct powernow_k8_data *data,
 		struct pst_s *pst, u8 maxvid)
 {
@@ -923,8 +937,13 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 
 		powernow_table[i].index = index;
 
-		powernow_table[i].frequency =
-			data->acpi_data.states[i].core_frequency * 1000;
+		/* Frequency may be rounded for these */
+		if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+			powernow_table[i].frequency =
+				freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
+		} else
+			powernow_table[i].frequency =
+				data->acpi_data.states[i].core_frequency * 1000;
 	}
 	return 0;
 }
@@ -1215,13 +1234,16 @@ static int powernowk8_verify(struct cpufreq_policy *pol)
 	return cpufreq_frequency_table_verify(pol, data->powernow_table);
 }
 
+static const char ACPI_PSS_BIOS_BUG_MSG[] =
+	KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
+	KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+
 /* per CPU init entry point to the driver */
 static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
 	int rc;
-	static int print_once;
 
 	if (!cpu_online(pol->cpu))
 		return -ENODEV;
@@ -1244,19 +1266,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 * an UP version, and is deprecated by AMD.
 		 */
 		if (num_online_cpus() != 1) {
-			/*
-			 * Replace this one with print_once as soon as such a
-			 * thing gets introduced
-			 */
-			if (!print_once) {
-				WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS "
-					"does not provide ACPI _PSS objects "
-					"in a way that Linux understands. "
-					"Please report this to the Linux ACPI"
-					" maintainers and complain to your "
-					"BIOS vendor.\n");
-				print_once++;
-			}
+			printk_once(ACPI_PSS_BIOS_BUG_MSG);
 			goto err_out;
 		}
 		if (pol->cpu != 0) {

arch/x86/kernel/cpu/mtrr/generic.c

@@ -275,7 +275,11 @@ static void __init print_mtrr_state(void)
 	}
 	printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
 	       mtrr_state.enabled & 2 ? "en" : "dis");
-	high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4;
+	if (size_or_mask & 0xffffffffUL)
+		high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
+	else
+		high_width = ffs(size_or_mask>>32) + 32 - 1;
+	high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
 	for (i = 0; i < num_var_ranges; ++i) {
 		if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
 			printk(KERN_DEBUG "  %u base %0*X%05X000 mask %0*X%05X000 %s\n",

arch/x86/kernel/ftrace.c

@@ -442,7 +442,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		_ASM_EXTABLE(1b, 4b)
 		_ASM_EXTABLE(2b, 4b)
 
-		: [old] "=r" (old), [faulted] "=r" (faulted)
+		: [old] "=&r" (old), [faulted] "=r" (faulted)
 		: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
 		: "memory"
 	);

arch/x86/kernel/paravirt.c

@@ -134,7 +134,9 @@ static void *get_call_destination(u8 type)
 		.pv_irq_ops = pv_irq_ops,
 		.pv_apic_ops = pv_apic_ops,
 		.pv_mmu_ops = pv_mmu_ops,
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
 		.pv_lock_ops = pv_lock_ops,
+#endif
 	};
 	return *((void **)&tmpl + type);
 }

arch/x86/kernel/reboot.c

@@ -232,6 +232,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
 		},
 	},
+	{	/* Handle problems with rebooting on Sony VGN-Z540N */
+		.callback = set_bios_reboot,
+		.ident = "Sony VGN-Z540N",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
+		},
+	},
 	{ }
 };
 

arch/x86/kernel/setup_percpu.c

@@ -160,8 +160,10 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 	/*
 	 * If large page isn't supported, there's no benefit in doing
 	 * this.  Also, on non-NUMA, embedding is better.
+	 *
+	 * NOTE: disabled for now.
 	 */
-	if (!cpu_has_pse || !pcpu_need_numa())
+	if (true || !cpu_has_pse || !pcpu_need_numa())
 		return -EINVAL;
 
 	/*

arch/x86/kvm/mmu.c

@@ -2897,8 +2897,7 @@ static int kvm_pv_mmu_write(struct kvm_vcpu *vcpu,
 
 static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu)
 {
-	kvm_x86_ops->tlb_flush(vcpu);
-	set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
+	kvm_set_cr3(vcpu, vcpu->arch.cr3);
 	return 1;
 }
 

arch/x86/kvm/x86.c

@@ -338,6 +338,9 @@ EXPORT_SYMBOL_GPL(kvm_lmsw);
 
 void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
+	unsigned long old_cr4 = vcpu->arch.cr4;
+	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
+
 	if (cr4 & CR4_RESERVED_BITS) {
 		printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
 		kvm_inject_gp(vcpu, 0);
@@ -351,7 +354,8 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 			kvm_inject_gp(vcpu, 0);
 			return;
 		}
-	} else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & X86_CR4_PAE)
+	} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
+		   && ((cr4 ^ old_cr4) & pdptr_bits)
 		   && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
 		printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
 		kvm_inject_gp(vcpu, 0);

arch/x86/mm/hugetlbpage.c

@@ -26,12 +26,16 @@ static unsigned long page_table_shareable(struct vm_area_struct *svma,
 	unsigned long sbase = saddr & PUD_MASK;
 	unsigned long s_end = sbase + PUD_SIZE;
 
+	/* Allow segments to share if only one is marked locked */
+	unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED;
+	unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED;
+
 	/*
 	 * match the virtual addresses, permission and the alignment of the
 	 * page table page.
 	 */
 	if (pmd_index(addr) != pmd_index(saddr) ||
-	    vma->vm_flags != svma->vm_flags ||
+	    vm_flags != svm_flags ||
 	    sbase < svma->vm_start || svma->vm_end < s_end)
 		return 0;