[SCSI] mpt2sas: MPI header version N is updated.

Updating MPI header version N.
Removed mpi_history.txt.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/mpt2sas/mpi/mpi2.h

@@ -8,7 +8,7 @@
  *                  scatter/gather formats.
  *  Creation Date:  June 21, 2006
  *
- *  mpi2.h Version:  02.00.14
+ *  mpi2.h Version:  02.00.15
  *
  *  Version History
  *  ---------------
@@ -57,6 +57,10 @@
  *                      Added MSI-x index mask and shift for Reply Post Host
  *                      Index register.
  *                      Added function code for Host Based Discovery Action.
+ *  02-10-10  02.00.15  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
+ *                      Added defines for product-specific range of message
+ *                      function codes, 0xF0 to 0xFF.
  *  --------------------------------------------------------------------------
  */
 
@@ -82,7 +86,7 @@
 #define MPI2_VERSION_02_00                  (0x0200)
 
 /* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x0E)
+#define MPI2_HEADER_VERSION_UNIT            (0x0F)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
@@ -473,8 +477,6 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION
 /*****************************************************************************
 *
 *        Message Functions
-*              0x80 -> 0x8F reserved for private message use per product
-*
 *
 *****************************************************************************/
 
@@ -506,6 +508,13 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION
 #define MPI2_FUNCTION_RAID_ACCELERATOR              (0x2C) /* RAID Accelerator*/
 /* Host Based Discovery Action */
 #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F)
+/* Power Management Control */
+#define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30)
+/* beginning of product-specific range */
+#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0)
+/* end of product-specific range */
+#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC          (0xFF)
+
 
 
 

drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Configuration messages and pages
  *  Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.13
+ *    mpi2_cnfg.h Version:  02.00.14
  *
  *  Version History
  *  ---------------
@@ -109,6 +109,18 @@
  *                      Added Ethernet configuration pages.
  *  10-28-09  02.00.13  Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
  *                      Added SAS PHY Page 4 structure and defines.
+ *  02-10-10  02.00.14  Modified the comments for the configuration page
+ *                      structures that contain an array of data. The host
+ *                      should use the "count" field in the page data (e.g. the
+ *                      NumPhys field) to determine the number of valid elements
+ *                      in the array.
+ *                      Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
+ *                      Added PowerManagementCapabilities to IO Unit Page 7.
+ *                      Added PortWidthModGroup field to
+ *                      MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
+ *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
+ *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
+ *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
  *  --------------------------------------------------------------------------
  */
 
@@ -373,8 +385,9 @@ typedef struct _MPI2_CONFIG_REPLY
 #define MPI2_MFGPAGE_DEVID_SAS2208_4                (0x0083)
 #define MPI2_MFGPAGE_DEVID_SAS2208_5                (0x0084)
 #define MPI2_MFGPAGE_DEVID_SAS2208_6                (0x0085)
-#define MPI2_MFGPAGE_DEVID_SAS2208_7                (0x0086)
-#define MPI2_MFGPAGE_DEVID_SAS2208_8                (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_1                (0x0086)
+#define MPI2_MFGPAGE_DEVID_SAS2308_2                (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_3                (0x006E)
 
 
 /* Manufacturing Page 0 */
@@ -540,7 +553,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_4
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
  */
 #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
 #define MPI2_MAN_PAGE_5_PHY_ENTRIES         (1)
@@ -618,7 +631,7 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
  */
 #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
 #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX  (1)
@@ -731,7 +744,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
+ * one and check the value returned for GPIOCount at runtime.
  */
 #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
 #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX    (1)
@@ -760,7 +773,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3
 
 /*
  * Upper layer code (drivers, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumDmaEngines at runtime.
+ * one and check the value returned for NumDmaEngines at runtime.
  */
 #ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
 #define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES      (1)
@@ -823,7 +836,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
     U8                      PCIeWidth;                              /* 0x06 */
     U8                      PCIeSpeed;                              /* 0x07 */
     U32                     ProcessorState;                         /* 0x08 */
-    U32                     Reserved2;                              /* 0x0C */
+    U32                     PowerManagementCapabilities;            /* 0x0C */
     U16                     IOCTemperature;                         /* 0x10 */
     U8                      IOCTemperatureUnits;                    /* 0x12 */
     U8                      IOCSpeed;                               /* 0x13 */
@@ -831,7 +844,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
 } MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
   Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
 
-#define MPI2_IOUNITPAGE7_PAGEVERSION                    (0x00)
+#define MPI2_IOUNITPAGE7_PAGEVERSION                    (0x01)
 
 /* defines for IO Unit Page 7 PCIeWidth field */
 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1              (0x01)
@@ -852,6 +865,14 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
 #define MPI2_IOUNITPAGE7_PSTATE_DISABLED            (0x01)
 #define MPI2_IOUNITPAGE7_PSTATE_ENABLED             (0x02)
 
+/* defines for IO Unit Page 7 PowerManagementCapabilities field */
+#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED    (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED    (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED    (0x00000100)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE    (0x00000008)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE    (0x00000004)
+
+
 /* defines for IO Unit Page 7 IOCTemperatureUnits field */
 #define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT       (0x00)
 #define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT        (0x01)
@@ -1195,7 +1216,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_3
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
  */
 #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
 #define MPI2_BIOS_PAGE_4_PHY_ENTRIES        (1)
@@ -1269,7 +1290,7 @@ typedef struct _MPI2_RAIDVOL0_SETTINGS
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
+ * one and check the value returned for NumPhysDisks at runtime.
  */
 #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
 #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX       (1)
@@ -1471,7 +1492,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ * one and check the value returned for NumPhysDiskPaths at runtime.
  */
 #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
 #define MPI2_RAID_PHYS_DISK1_PATH_MAX   (1)
@@ -1633,7 +1654,7 @@ typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
  */
 #ifndef MPI2_SAS_IOUNIT0_PHY_MAX
 #define MPI2_SAS_IOUNIT0_PHY_MAX        (1)
@@ -1704,7 +1725,7 @@ typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
  */
 #ifndef MPI2_SAS_IOUNIT1_PHY_MAX
 #define MPI2_SAS_IOUNIT1_PHY_MAX        (1)
@@ -1795,7 +1816,7 @@ typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * four and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
  */
 #ifndef MPI2_SAS_IOUNIT4_PHY_MAX
 #define MPI2_SAS_IOUNIT4_PHY_MAX        (4)
@@ -1833,7 +1854,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4
 
 typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
     U8          ControlFlags;               /* 0x00 */
-    U8          Reserved1;                  /* 0x01 */
+    U8          PortWidthModGroup;          /* 0x01 */
     U16         InactivityTimerExponent;    /* 0x02 */
     U8          SATAPartialTimeout;         /* 0x04 */
     U8          Reserved2;                  /* 0x05 */
@@ -1853,6 +1874,9 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
 #define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE     (0x02)
 #define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE     (0x01)
 
+/* defines for PortWidthModeGroup field */
+#define MPI2_SASIOUNIT5_PWMG_DISABLE                    (0xFF)
+
 /* defines for InactivityTimerExponent field */
 #define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER            (0x7000)
 #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER           (12)
@@ -1874,7 +1898,7 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
  */
 #ifndef MPI2_SAS_IOUNIT5_PHY_MAX
 #define MPI2_SAS_IOUNIT5_PHY_MAX        (1)
@@ -1892,7 +1916,132 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
   MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
   Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
 
-#define MPI2_SASIOUNITPAGE5_PAGEVERSION     (0x00)
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION     (0x01)
+
+
+/* SAS IO Unit Page 6 */
+
+typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
+    U8          CurrentStatus;              /* 0x00 */
+    U8          CurrentModulation;          /* 0x01 */
+    U8          CurrentUtilization;         /* 0x02 */
+    U8          Reserved1;                  /* 0x03 */
+    U32         Reserved2;                  /* 0x04 */
+} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+  Mpi2SasIOUnit6PortWidthModGroupStatus_t,
+  MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t;
+
+/* defines for CurrentStatus field */
+#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE                      (0x00)
+#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED                     (0x01)
+#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG                   (0x02)
+#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN                        (0x03)
+#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY                 (0x04)
+#define MPI2_SASIOUNIT6_STATUS_INACTIVE                         (0x05)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT                    (0x06)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST                      (0x07)
+
+/* defines for CurrentModulation field */
+#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT                   (0x00)
+#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT                   (0x01)
+#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT                   (0x02)
+#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT                  (0x03)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
+#define MPI2_SAS_IOUNIT6_GROUP_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
+    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
+    U32                                 Reserved1;                  /* 0x08 */
+    U32                                 Reserved2;                  /* 0x0C */
+    U8                                  NumGroups;                  /* 0x10 */
+    U8                                  Reserved3;                  /* 0x11 */
+    U16                                 Reserved4;                  /* 0x12 */
+    MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
+	PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_6,
+  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
+  Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t;
+
+#define MPI2_SASIOUNITPAGE6_PAGEVERSION     (0x00)
+
+
+/* SAS IO Unit Page 7 */
+
+typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
+    U8          Flags;                      /* 0x00 */
+    U8          Reserved1;                  /* 0x01 */
+    U16         Reserved2;                  /* 0x02 */
+    U8          Threshold75Pct;             /* 0x04 */
+    U8          Threshold50Pct;             /* 0x05 */
+    U8          Threshold25Pct;             /* 0x06 */
+    U8          Reserved3;                  /* 0x07 */
+} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+  Mpi2SasIOUnit7PortWidthModGroupSettings_t,
+  MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t;
+
+/* defines for Flags field */
+#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION  (0x01)
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
+#define MPI2_SAS_IOUNIT7_GROUP_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
+    MPI2_CONFIG_EXTENDED_PAGE_HEADER            Header;             /* 0x00 */
+    U8                                          SamplingInterval;   /* 0x08 */
+    U8                                          WindowLength;       /* 0x09 */
+    U16                                         Reserved1;          /* 0x0A */
+    U32                                         Reserved2;          /* 0x0C */
+    U32                                         Reserved3;          /* 0x10 */
+    U8                                          NumGroups;          /* 0x14 */
+    U8                                          Reserved4;          /* 0x15 */
+    U16                                         Reserved5;          /* 0x16 */
+    MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
+	PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_7,
+  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
+  Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t;
+
+#define MPI2_SASIOUNITPAGE7_PAGEVERSION     (0x00)
+
+
+/* SAS IO Unit Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
+    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;			/* 0x00 */
+    U32                                 Reserved1;		/* 0x08 */
+    U32                                 PowerManagementCapabilities;/* 0x0C */
+    U32                                 Reserved2;		/* 0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_8,
+  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
+  Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t;
+
+#define MPI2_SASIOUNITPAGE8_PAGEVERSION     (0x00)
+
+/* defines for PowerManagementCapabilities field */
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x000001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x000000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x000000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x000000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x000000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x000000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x000000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x000000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x000000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x000000001)
 
 
 
@@ -2182,7 +2331,7 @@ typedef struct _MPI2_SASPHY2_PHY_EVENT {
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ * one and check the value returned for NumPhyEvents at runtime.
  */
 #ifndef MPI2_SASPHY2_PHY_EVENT_MAX
 #define MPI2_SASPHY2_PHY_EVENT_MAX      (1)
@@ -2274,7 +2423,7 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ * one and check the value returned for NumPhyEvents at runtime.
  */
 #ifndef MPI2_SASPHY3_PHY_EVENT_MAX
 #define MPI2_SASPHY3_PHY_EVENT_MAX      (1)
@@ -2385,7 +2534,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumLogEntries at runtime.
  */
 #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
 #define MPI2_LOG_0_NUM_LOG_ENTRIES          (1)
@@ -2435,7 +2584,7 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0
 
 /*
  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumElements at runtime.
  */
 #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
 #define MPI2_RAIDCONFIG0_MAX_ELEMENTS       (1)

drivers/scsi/mpt2sas/mpi/mpi2_init.h

@@ -6,7 +6,7 @@
  *          Title:  MPI SCSI initiator mode messages and structures
  *  Creation Date:  June 23, 2006
  *
- *    mpi2_init.h Version:  02.00.08
+ *    mpi2_init.h Version:  02.00.09
  *
  *  Version History
  *  ---------------
@@ -31,6 +31,7 @@
  *                      both SCSI IO Error Reply and SCSI Task Management Reply.
  *                      Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
  *                      Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
+ *  02-10-10  02.00.09  Removed unused structure that had "#if 0" around it.
  *  --------------------------------------------------------------------------
  */
 
@@ -57,20 +58,6 @@ typedef struct
 } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
   Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;
 
-/* TBD: I don't think this is needed for MPI2/Gen2 */
-#if 0
-typedef struct
-{
-    U8                      CDB[16];                    /* 0x00 */
-    U32                     DataLength;                 /* 0x10 */
-    U32                     PrimaryReferenceTag;        /* 0x14 */
-    U16                     PrimaryApplicationTag;      /* 0x18 */
-    U16                     PrimaryApplicationTagMask;  /* 0x1A */
-    U32                     TransferLength;             /* 0x1C */
-} MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16,
-  Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t;
-#endif
-
 typedef union
 {
     U8                      CDB32[32];

drivers/scsi/mpt2sas/mpi/mpi2_ioc.h

@@ -6,7 +6,7 @@
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  October 11, 2006
  *
- *  mpi2_ioc.h Version:  02.00.13
+ *  mpi2_ioc.h Version:  02.00.14
  *
  *  Version History
  *  ---------------
@@ -98,6 +98,9 @@
  *                      (MPI2_FW_HEADER_PID_).
  *                      Modified values for SAS ProductID Family
  *                      (MPI2_FW_HEADER_PID_FAMILY_).
+ *  02-10-10  02.00.14  Added SAS Quiesce Event structure and defines.
+ *                      Added PowerManagementControl Request structures and
+ *                      defines.
  *  --------------------------------------------------------------------------
  */
 
@@ -469,6 +472,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
 #define MPI2_EVENT_SAS_PHY_COUNTER                  (0x0022)
 #define MPI2_EVENT_GPIO_INTERRUPT                   (0x0023)
 #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY         (0x0024)
+#define MPI2_EVENT_SAS_QUIESCE                      (0x0025)
 
 
 /* Log Entry Added Event data */
@@ -895,6 +899,22 @@ typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
  * */
 
 
+/* SAS Quiesce Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
+    U8                      ReasonCode;                 /* 0x00 */
+    U8                      Reserved1;                  /* 0x01 */
+    U16                     Reserved2;                  /* 0x02 */
+    U32                     Reserved3;                  /* 0x04 */
+} MPI2_EVENT_DATA_SAS_QUIESCE,
+  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
+  Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t;
+
+/* SAS Quiesce Event data ReasonCode values */
+#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED                   (0x01)
+#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED                 (0x02)
+
+
 /* Host Based Discovery Phy Event data */
 
 typedef struct _MPI2_EVENT_HBD_PHY_SAS {
@@ -1006,6 +1026,7 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST
 #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1             (0x07)
 #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2             (0x08)
 #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID             (0x09)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE             (0x0A)
 #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK    (0x0B)
 
 /* FWDownload TransactionContext Element */
@@ -1183,7 +1204,6 @@ typedef struct _MPI2_FW_IMAGE_HEADER
 
 #define MPI2_FW_HEADER_PID_PROD_MASK                    (0x0F00)
 #define MPI2_FW_HEADER_PID_PROD_A                       (0x0000)
-#define MPI2_FW_HEADER_PID_PROD_MASK                    (0x0F00)
 #define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI   (0x0200)
 #define MPI2_FW_HEADER_PID_PROD_IR_SCSI                 (0x0700)
 
@@ -1407,5 +1427,100 @@ typedef struct _MPI2_INIT_IMAGE_FOOTER
 #define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET      (0x14)
 
 
+/****************************************************************************
+*  PowerManagementControl message
+****************************************************************************/
+
+/* PowerManagementControl Request message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
+    U8                      Feature;                    /* 0x00 */
+    U8                      Reserved1;                  /* 0x01 */
+    U8                      ChainOffset;                /* 0x02 */
+    U8                      Function;                   /* 0x03 */
+    U16                     Reserved2;                  /* 0x04 */
+    U8                      Reserved3;                  /* 0x06 */
+    U8                      MsgFlags;                   /* 0x07 */
+    U8                      VP_ID;                      /* 0x08 */
+    U8                      VF_ID;                      /* 0x09 */
+    U16                     Reserved4;                  /* 0x0A */
+    U8                      Parameter1;                 /* 0x0C */
+    U8                      Parameter2;                 /* 0x0D */
+    U8                      Parameter3;                 /* 0x0E */
+    U8                      Parameter4;                 /* 0x0F */
+    U32                     Reserved5;                  /* 0x10 */
+    U32                     Reserved6;                  /* 0x14 */
+} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
+  Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t;
+
+/* defines for the Feature field */
+#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND       (0x01)
+#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION   (0x02)
+#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK               (0x03)
+#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED               (0x04)
+#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC    (0x80)
+#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC    (0xFF)
+
+/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
+/* Parameter1 contains a PHY number */
+/* Parameter2 indicates power condition action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_PARTIAL                  (0x01)
+#define MPI2_PM_CONTROL_PARAM2_SLUMBER                  (0x02)
+#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT            (0x03)
+/* Parameter3 and Parameter4 are reserved */
+
+/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
+ *  Feature */
+/* Parameter1 contains SAS port width modulation group number */
+/* Parameter2 indicates IOC action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP        (0x01)
+#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION        (0x02)
+#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP     (0x03)
+/* Parameter3 indicates desired modulation level using these defines */
+#define MPI2_PM_CONTROL_PARAM3_25_PERCENT               (0x00)
+#define MPI2_PM_CONTROL_PARAM3_50_PERCENT               (0x01)
+#define MPI2_PM_CONTROL_PARAM3_75_PERCENT               (0x02)
+#define MPI2_PM_CONTROL_PARAM3_100_PERCENT              (0x03)
+/* Parameter4 is reserved */
+
+/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
+/* Parameter1 indicates desired PCIe link speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS            (0x00)
+#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS            (0x01)
+#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS            (0x02)
+/* Parameter2 indicates desired PCIe link width using these defines */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1                 (0x01)
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2                 (0x02)
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4                 (0x04)
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8                 (0x08)
+/* Parameter3 and Parameter4 are reserved */
+
+/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
+/* Parameter1 indicates desired IOC hardware clock speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED           (0x01)
+#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED           (0x02)
+#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED        (0x04)
+#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED         (0x08)
+/* Parameter2, Parameter3, and Parameter4 are reserved */
+
+
+/* PowerManagementControl Reply message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
+    U8                      Feature;                    /* 0x00 */
+    U8                      Reserved1;                  /* 0x01 */
+    U8                      MsgLength;                  /* 0x02 */
+    U8                      Function;                   /* 0x03 */
+    U16                     Reserved2;                  /* 0x04 */
+    U8                      Reserved3;                  /* 0x06 */
+    U8                      MsgFlags;                   /* 0x07 */
+    U8                      VP_ID;                      /* 0x08 */
+    U8                      VF_ID;                      /* 0x09 */
+    U16                     Reserved4;                  /* 0x0A */
+    U16                     Reserved5;                  /* 0x0C */
+    U16                     IOCStatus;                  /* 0x0E */
+    U32                     IOCLogInfo;                 /* 0x10 */
+} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
+  Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t;
+
+
 #endif
 

drivers/scsi/mpt2sas/mpt2sas_scsih.c

@@ -223,9 +223,12 @@ static struct pci_device_id scsih_pci_table[] = {
 		PCI_ANY_ID, PCI_ANY_ID },
 	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_7,
+	/* Mustang ~ 2308 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_8,
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
 		PCI_ANY_ID, PCI_ANY_ID },
 	{0}	/* Terminating entry */
 };