Merge branch 'depends/omap/gpio/runtime-pm-cleanup' into next/cleanup

Conflicts:
	arch/arm/mach-omap1/gpio16xx.c
	drivers/gpio/gpio-omap.c

Merge in the runtime-pm-cleanup branch from the gpio tree into
next/cleanup, this resolves a nonobvious merge conflict between
the two branches. Both branches move parts of the gpio-omap
driver into platform code, this takes the superset of both
changes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-omap1/gpio15xx.c

@@ -42,11 +42,12 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 	.irqstatus	= OMAP_MPUIO_GPIO_INT,
 	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
-	.bank_type		= METHOD_MPUIO,
+	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
 	.regs			= &omap15xx_mpuio_regs,
@@ -83,11 +84,12 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 	.irqstatus	= OMAP1510_GPIO_INT_STATUS,
 	.irqenable	= OMAP1510_GPIO_INT_MASK,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP1510_GPIO_INT_CONTROL,
+	.pinctrl	= OMAP1510_GPIO_PIN_CONTROL,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_type		= METHOD_GPIO_1510,
 	.bank_width		= 16,
 	.regs                   = &omap15xx_gpio_regs,
 };
@@ -115,7 +117,6 @@ static int __init omap15xx_gpio_init(void)
 	platform_device_register(&omap15xx_mpu_gpio);
 	platform_device_register(&omap15xx_gpio);
 
-	gpio_bank_count = 2;
 	return 0;
 }
 postcore_initcall(omap15xx_gpio_init);

arch/arm/mach-omap1/gpio16xx.c

@@ -24,6 +24,9 @@
 #define OMAP1610_GPIO4_BASE		0xfffbbc00
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
+/* smart idle, enable wakeup */
+#define SYSCONFIG_WORD			0x14
+
 /* mpu gpio */
 static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
 	{
@@ -45,11 +48,12 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 	.irqstatus	= OMAP_MPUIO_GPIO_INT,
 	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
-	.bank_type		= METHOD_MPUIO,
+	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
 	.regs                   = &omap16xx_mpuio_regs,
@@ -89,11 +93,13 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 	.irqenable	= OMAP1610_GPIO_IRQENABLE1,
 	.set_irqenable	= OMAP1610_GPIO_SET_IRQENABLE1,
 	.clr_irqenable	= OMAP1610_GPIO_CLEAR_IRQENABLE1,
+	.wkup_en	= OMAP1610_GPIO_WAKEUPENABLE,
+	.edgectrl1	= OMAP1610_GPIO_EDGE_CTRL1,
+	.edgectrl2	= OMAP1610_GPIO_EDGE_CTRL2,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -123,7 +129,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 16,
-	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -153,7 +158,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 32,
-	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -183,7 +187,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 48,
-	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -214,6 +217,10 @@ static struct __initdata platform_device * omap16xx_gpio_dev[] = {
 static int __init omap16xx_gpio_init(void)
 {
 	int i;
+	void __iomem *base;
+	struct resource *res;
+	struct platform_device *pdev;
+	struct omap_gpio_platform_data *pdata;
 
 	if (!cpu_is_omap16xx())
 		return -EINVAL;
@@ -225,10 +232,27 @@ static int __init omap16xx_gpio_init(void)
 	omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
 					ULPD_CAM_CLK_CTRL);
 
-	for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
-		platform_device_register(omap16xx_gpio_dev[i]);
+	for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) {
+		pdev = omap16xx_gpio_dev[i];
+		pdata = pdev->dev.platform_data;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (unlikely(!res)) {
+			dev_err(&pdev->dev, "Invalid mem resource.\n");
+			return -ENODEV;
+		}
 
-	gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev);
+		base = ioremap(res->start, resource_size(res));
+		if (unlikely(!base)) {
+			dev_err(&pdev->dev, "ioremap failed.\n");
+			return -ENOMEM;
+		}
+
+		__raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG);
+		iounmap(base);
+
+		platform_device_register(omap16xx_gpio_dev[i]);
+	}
 
 	return 0;
 }

arch/arm/mach-omap1/gpio7xx.c

@@ -47,12 +47,13 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
 	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
-	.bank_type		= METHOD_MPUIO,
-	.bank_width		= 32,
+	.is_mpuio		= true,
+	.bank_width		= 16,
 	.bank_stride		= 2,
 	.regs                   = &omap7xx_mpuio_regs,
 };
@@ -88,11 +89,11 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
 	.irqenable	= OMAP7XX_GPIO_INT_MASK,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -122,7 +123,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 32,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -152,7 +152,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 64,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -182,7 +181,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 96,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -212,7 +210,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 128,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -242,7 +239,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 160,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -282,8 +278,6 @@ static int __init omap7xx_gpio_init(void)
 	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
 		platform_device_register(omap7xx_gpio_dev[i]);
 
-	gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev);
-
 	return 0;
 }
 postcore_initcall(omap7xx_gpio_init);

arch/arm/mach-omap2/gpio.c

@@ -23,6 +23,9 @@
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#include "powerdomain.h"
 
 static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 {
@@ -31,6 +34,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	struct omap_gpio_dev_attr *dev_attr;
 	char *name = "omap_gpio";
 	int id;
+	struct powerdomain *pwrdm;
 
 	/*
 	 * extract the device id from name field available in the
@@ -52,7 +56,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	pdata->bank_width = dev_attr->bank_width;
 	pdata->dbck_flag = dev_attr->dbck_flag;
 	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
-
+	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
 	if (!pdata) {
 		pr_err("gpio%d: Memory allocation failed\n", id);
@@ -61,8 +65,15 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 
 	switch (oh->class->rev) {
 	case 0:
+		if (id == 1)
+			/* non-wakeup GPIO pins for OMAP2 Bank1 */
+			pdata->non_wakeup_gpios = 0xe203ffc0;
+		else if (id == 2)
+			/* non-wakeup GPIO pins for OMAP2 Bank2 */
+			pdata->non_wakeup_gpios = 0x08700040;
+		/* fall through */
+
 	case 1:
-		pdata->bank_type = METHOD_GPIO_24XX;
 		pdata->regs->revision = OMAP24XX_GPIO_REVISION;
 		pdata->regs->direction = OMAP24XX_GPIO_OE;
 		pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
@@ -72,13 +83,19 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
 		pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
 		pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
+		pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2;
 		pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
 		pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
 		pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
 		pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
+		pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
+		pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN;
+		pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
+		pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
+		pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
+		pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
 		break;
 	case 2:
-		pdata->bank_type = METHOD_GPIO_44XX;
 		pdata->regs->revision = OMAP4_GPIO_REVISION;
 		pdata->regs->direction = OMAP4_GPIO_OE;
 		pdata->regs->datain = OMAP4_GPIO_DATAIN;
@@ -88,10 +105,17 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
 		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
 		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+		pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1;
 		pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
 		pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
 		pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
 		pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
+		pdata->regs->ctrl = OMAP4_GPIO_CTRL;
+		pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0;
+		pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
+		pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
+		pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
+		pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
@@ -99,6 +123,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		return -EINVAL;
 	}
 
+	pwrdm = omap_hwmod_get_pwrdm(oh);
+	pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
+
 	pdev = omap_device_build(name, id - 1, oh, pdata,
 				sizeof(*pdata),	NULL, 0, false);
 	kfree(pdata);
@@ -109,9 +136,6 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		return PTR_ERR(pdev);
 	}
 
-	omap_device_disable_idle_on_suspend(pdev);
-
-	gpio_bank_count++;
 	return 0;
 }
 

arch/arm/mach-omap2/pm34xx.c

@@ -75,16 +75,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
 static struct powerdomain *core_pwrdm, *per_pwrdm;
 static struct powerdomain *cam_pwrdm;
 
-static inline void omap3_per_save_context(void)
-{
-	omap_gpio_save_context();
-}
-
-static inline void omap3_per_restore_context(void)
-{
-	omap_gpio_restore_context();
-}
-
 static void omap3_enable_io_chain(void)
 {
 	int timeout = 0;
@@ -332,8 +322,6 @@ void omap_sram_idle(void)
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
-		if (per_next_state == PWRDM_POWER_OFF)
-				omap3_per_save_context();
 	}
 
 	/* CORE */
@@ -399,8 +387,6 @@ void omap_sram_idle(void)
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
 		omap2_gpio_resume_after_idle();
-		if (per_prev_state == PWRDM_POWER_OFF)
-			omap3_per_restore_context();
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */

arch/arm/plat-omap/include/plat/gpio.h

@@ -162,13 +162,6 @@
 				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
 				 IH_GPIO_BASE + (nr))
 
-#define METHOD_MPUIO		0
-#define METHOD_GPIO_1510	1
-#define METHOD_GPIO_1610	2
-#define METHOD_GPIO_7XX		3
-#define METHOD_GPIO_24XX	5
-#define METHOD_GPIO_44XX	6
-
 struct omap_gpio_dev_attr {
 	int bank_width;		/* GPIO bank width */
 	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
@@ -184,10 +177,21 @@ struct omap_gpio_reg_offs {
 	u16 irqstatus;
 	u16 irqstatus2;
 	u16 irqenable;
+	u16 irqenable2;
 	u16 set_irqenable;
 	u16 clr_irqenable;
 	u16 debounce;
 	u16 debounce_en;
+	u16 ctrl;
+	u16 wkup_en;
+	u16 leveldetect0;
+	u16 leveldetect1;
+	u16 risingdetect;
+	u16 fallingdetect;
+	u16 irqctrl;
+	u16 edgectrl1;
+	u16 edgectrl2;
+	u16 pinctrl;
 
 	bool irqenable_inv;
 };
@@ -198,19 +202,20 @@ struct omap_gpio_platform_data {
 	int bank_width;		/* GPIO bank width */
 	int bank_stride;	/* Only needed for omap1 MPUIO */
 	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+	bool loses_context;	/* whether the bank would ever lose context */
+	bool is_mpuio;		/* whether the bank is of type MPUIO */
+	u32 non_wakeup_gpios;
 
 	struct omap_gpio_reg_offs *regs;
-};
 
-/* TODO: Analyze removing gpio_bank_count usage from driver code */
-extern int gpio_bank_count;
+	/* Return context loss count due to PM states changing */
+	int (*get_context_loss_count)(struct device *dev);
+};
 
 extern void omap2_gpio_prepare_for_idle(int off_mode);
 extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
-extern void omap_gpio_save_context(void);
-extern void omap_gpio_restore_context(void);
 /*-------------------------------------------------------------------------*/
 
 /* Wrappers for "new style" GPIO calls, using the new infrastructure