Merge tag 'imx-dt-3.13' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo:
The imx/mxs device tree changes for 3.13:

- Use macros for mxs pinctrl settings
- New board support: VF610 Cosmic/Cosmic+, imx6q-udoo, MSR M28CU3
- Support DSPI device for vf610
- Add PCIe device for imx6qdl
- Add UHS pinctrl states for imx6sl and imx6qdl
- Display support for APF and imx51-babbage boards
- Enable SPI NOR and USB for imx6sl-evk board
- Enable LVDS for imx6q-sabrelite and SPDIF for imx6qdl-wandboard
- Misc updates on boards: TX28, imx6qdl-wandboard, imx53-qsb etc.
- Some random updates on imx51 device tree

* tag 'imx-dt-3.13' of git://git.linaro.org/people/shawnguo/linux-2.6: (44 commits)
  ARM: imx: imx6sl iomuxc syscon is compatible to imx6q
  ARM: dts: imx6sl-evk: enable the SPI NOR
  ARM: dts: imx6sl: add a pinctrl for ECSPI1
  ARM: imx27: add missing #pwm-cells property
  ARM: dts: imx6sl: add pinctrl uhs states for usdhc
  ARM: dts: imx6qdl-sabresd: Add backlight support for lvds
  ARM: dts: imx51-babbage: Make DVI and WVGA panel functional
  ARM: imx27-apf27dev: Add framebuffer support
  ARM: imx51-apf51dev: Add parallel display support
  ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source
  ARM: dts: imx53-qsb: SDHC1 does not have cd-gpios
  ARM: dts: imx53-qsb: SDHC3 is connected in 8-bit mode
  ARM: dts: mxs: Add MSR M28CU3 board
  ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios
  ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios
  ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog
  ARM: dts: imx6qdl: add pcie device node
  ARM: dts: imx6q-udoo: Add initial board support
  ARM: dts: mxs: Add muxing options for the SSP2 MMC
  ARM: dts: add initial VF610 Cosmic/Cosmic+ board support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt

@@ -59,16 +59,16 @@ Required subnode-properties:
 
 Optional subnode-properties:
 - fsl,drive-strength: Integer.
-    0: 4 mA
-    1: 8 mA
-    2: 12 mA
-    3: 16 mA
+    0: MXS_DRIVE_4mA
+    1: MXS_DRIVE_8mA
+    2: MXS_DRIVE_12mA
+    3: MXS_DRIVE_16mA
 - fsl,voltage: Integer.
-    0: 1.8 V
-    1: 3.3 V
+    0: MXS_VOLTAGE_LOW  - 1.8 V
+    1: MXS_VOLTAGE_HIGH - 3.3 V
 - fsl,pull-up: Integer.
-    0: Disable the internal pull-up
-    1: Enable the internal pull-up
+    0: MXS_PULL_DISABLE - Disable the internal pull-up
+    1: MXS_PULL_ENABLE  - Enable the internal pull-up
 
 Note that when enabling the pull-up, the internal pad keeper gets disabled.
 Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
@@ -85,23 +85,32 @@ pinctrl@80018000 {
 	mmc0_8bit_pins_a: mmc0-8bit@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x2000 0x2010 0x2020 0x2030
-			0x2040 0x2050 0x2060 0x2070
-			0x2080 0x2090 0x20a0>;
-		fsl,drive-strength = <1>;
-		fsl,voltage = <1>;
-		fsl,pull-up = <1>;
+			MX28_PAD_SSP0_DATA0__SSP0_D0
+			MX28_PAD_SSP0_DATA1__SSP0_D1
+			MX28_PAD_SSP0_DATA2__SSP0_D2
+			MX28_PAD_SSP0_DATA3__SSP0_D3
+			MX28_PAD_SSP0_DATA4__SSP0_D4
+			MX28_PAD_SSP0_DATA5__SSP0_D5
+			MX28_PAD_SSP0_DATA6__SSP0_D6
+			MX28_PAD_SSP0_DATA7__SSP0_D7
+			MX28_PAD_SSP0_CMD__SSP0_CMD
+			MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+			MX28_PAD_SSP0_SCK__SSP0_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
 	};
 
 	mmc_cd_cfg: mmc-cd-cfg {
-		fsl,pinmux-ids = <0x2090>;
-		fsl,pull-up = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
 	mmc_sck_cfg: mmc-sck-cfg {
-		fsl,pinmux-ids = <0x20a0>;
-		fsl,drive-strength = <2>;
-		fsl,pull-up = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_SCK__SSP0_SCK>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 };
 
@@ -112,811 +121,7 @@ adjusting the configuration for pins card-detection and clock from what group
 node mmc0-8bit defines.  Only the configuration properties to be adjusted need
 to be listed in the config nodes.
 
-Valid values for i.MX28 pinmux-id:
-
-pinmux						id
-------						--
-MX28_PAD_GPMI_D00__GPMI_D0			0x0000
-MX28_PAD_GPMI_D01__GPMI_D1			0x0010
-MX28_PAD_GPMI_D02__GPMI_D2			0x0020
-MX28_PAD_GPMI_D03__GPMI_D3			0x0030
-MX28_PAD_GPMI_D04__GPMI_D4			0x0040
-MX28_PAD_GPMI_D05__GPMI_D5			0x0050
-MX28_PAD_GPMI_D06__GPMI_D6			0x0060
-MX28_PAD_GPMI_D07__GPMI_D7			0x0070
-MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
-MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
-MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
-MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
-MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
-MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
-MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
-MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
-MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
-MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
-MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
-MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
-MX28_PAD_LCD_D00__LCD_D0			0x1000
-MX28_PAD_LCD_D01__LCD_D1			0x1010
-MX28_PAD_LCD_D02__LCD_D2			0x1020
-MX28_PAD_LCD_D03__LCD_D3			0x1030
-MX28_PAD_LCD_D04__LCD_D4			0x1040
-MX28_PAD_LCD_D05__LCD_D5			0x1050
-MX28_PAD_LCD_D06__LCD_D6			0x1060
-MX28_PAD_LCD_D07__LCD_D7			0x1070
-MX28_PAD_LCD_D08__LCD_D8			0x1080
-MX28_PAD_LCD_D09__LCD_D9			0x1090
-MX28_PAD_LCD_D10__LCD_D10			0x10a0
-MX28_PAD_LCD_D11__LCD_D11			0x10b0
-MX28_PAD_LCD_D12__LCD_D12			0x10c0
-MX28_PAD_LCD_D13__LCD_D13			0x10d0
-MX28_PAD_LCD_D14__LCD_D14			0x10e0
-MX28_PAD_LCD_D15__LCD_D15			0x10f0
-MX28_PAD_LCD_D16__LCD_D16			0x1100
-MX28_PAD_LCD_D17__LCD_D17			0x1110
-MX28_PAD_LCD_D18__LCD_D18			0x1120
-MX28_PAD_LCD_D19__LCD_D19			0x1130
-MX28_PAD_LCD_D20__LCD_D20			0x1140
-MX28_PAD_LCD_D21__LCD_D21			0x1150
-MX28_PAD_LCD_D22__LCD_D22			0x1160
-MX28_PAD_LCD_D23__LCD_D23			0x1170
-MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
-MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
-MX28_PAD_LCD_RS__LCD_RS				0x11a0
-MX28_PAD_LCD_CS__LCD_CS				0x11b0
-MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
-MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
-MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
-MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
-MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
-MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
-MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
-MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
-MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
-MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
-MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
-MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
-MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
-MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
-MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
-MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
-MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
-MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
-MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
-MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
-MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
-MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
-MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
-MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
-MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
-MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
-MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
-MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
-MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
-MX28_PAD_AUART0_RX__AUART0_RX			0x3000
-MX28_PAD_AUART0_TX__AUART0_TX			0x3010
-MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
-MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
-MX28_PAD_AUART1_RX__AUART1_RX			0x3040
-MX28_PAD_AUART1_TX__AUART1_TX			0x3050
-MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
-MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
-MX28_PAD_AUART2_RX__AUART2_RX			0x3080
-MX28_PAD_AUART2_TX__AUART2_TX			0x3090
-MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
-MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
-MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
-MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
-MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
-MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
-MX28_PAD_PWM0__PWM_0				0x3100
-MX28_PAD_PWM1__PWM_1				0x3110
-MX28_PAD_PWM2__PWM_2				0x3120
-MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
-MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
-MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
-MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
-MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
-MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
-MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
-MX28_PAD_SPDIF__SPDIF_TX			0x31b0
-MX28_PAD_PWM3__PWM_3				0x31c0
-MX28_PAD_PWM4__PWM_4				0x31d0
-MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
-MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
-MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
-MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
-MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
-MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
-MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
-MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
-MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
-MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
-MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
-MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
-MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
-MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
-MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
-MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
-MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
-MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
-MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
-MX28_PAD_EMI_D00__EMI_DATA0			0x5000
-MX28_PAD_EMI_D01__EMI_DATA1			0x5010
-MX28_PAD_EMI_D02__EMI_DATA2			0x5020
-MX28_PAD_EMI_D03__EMI_DATA3			0x5030
-MX28_PAD_EMI_D04__EMI_DATA4			0x5040
-MX28_PAD_EMI_D05__EMI_DATA5			0x5050
-MX28_PAD_EMI_D06__EMI_DATA6			0x5060
-MX28_PAD_EMI_D07__EMI_DATA7			0x5070
-MX28_PAD_EMI_D08__EMI_DATA8			0x5080
-MX28_PAD_EMI_D09__EMI_DATA9			0x5090
-MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
-MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
-MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
-MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
-MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
-MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
-MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
-MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
-MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
-MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
-MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
-MX28_PAD_EMI_CLK__EMI_CLK			0x5150
-MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
-MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
-MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
-MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
-MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
-MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
-MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
-MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
-MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
-MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
-MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
-MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
-MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
-MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
-MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
-MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
-MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
-MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
-MX28_PAD_EMI_BA0__EMI_BA0			0x6100
-MX28_PAD_EMI_BA1__EMI_BA1			0x6110
-MX28_PAD_EMI_BA2__EMI_BA2			0x6120
-MX28_PAD_EMI_CASN__EMI_CASN			0x6130
-MX28_PAD_EMI_RASN__EMI_RASN			0x6140
-MX28_PAD_EMI_WEN__EMI_WEN			0x6150
-MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
-MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
-MX28_PAD_EMI_CKE__EMI_CKE			0x6180
-MX28_PAD_GPMI_D00__SSP1_D0			0x0001
-MX28_PAD_GPMI_D01__SSP1_D1			0x0011
-MX28_PAD_GPMI_D02__SSP1_D2			0x0021
-MX28_PAD_GPMI_D03__SSP1_D3			0x0031
-MX28_PAD_GPMI_D04__SSP1_D4			0x0041
-MX28_PAD_GPMI_D05__SSP1_D5			0x0051
-MX28_PAD_GPMI_D06__SSP1_D6			0x0061
-MX28_PAD_GPMI_D07__SSP1_D7			0x0071
-MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
-MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
-MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
-MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
-MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
-MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
-MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
-MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
-MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
-MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
-MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
-MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
-MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
-MX28_PAD_LCD_D03__ETM_DA8			0x1031
-MX28_PAD_LCD_D04__ETM_DA9			0x1041
-MX28_PAD_LCD_D08__ETM_DA3			0x1081
-MX28_PAD_LCD_D09__ETM_DA4			0x1091
-MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
-MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
-MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
-MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
-MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
-MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
-MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
-MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
-MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
-MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
-MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
-MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
-MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
-MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
-MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
-MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
-MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
-MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
-MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
-MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
-MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
-MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
-MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
-MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
-MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
-MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
-MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
-MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
-MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
-MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
-MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
-MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
-MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
-MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
-MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
-MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
-MX28_PAD_AUART1_RTS__USB0_ID			0x3071
-MX28_PAD_AUART2_RX__SSP3_D1			0x3081
-MX28_PAD_AUART2_TX__SSP3_D2			0x3091
-MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
-MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
-MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
-MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
-MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
-MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
-MX28_PAD_PWM0__I2C1_SCL				0x3101
-MX28_PAD_PWM1__I2C1_SDA				0x3111
-MX28_PAD_PWM2__USB0_ID				0x3121
-MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
-MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
-MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
-MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
-MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
-MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
-MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
-MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
-MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
-MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
-MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
-MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
-MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
-MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
-MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
-MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
-MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
-MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
-MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
-MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
-MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
-MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
-MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
-MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
-MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
-MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
-MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
-MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
-MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
-MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
-MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
-MX28_PAD_LCD_D00__ETM_DA0			0x1002
-MX28_PAD_LCD_D01__ETM_DA1			0x1012
-MX28_PAD_LCD_D02__ETM_DA2			0x1022
-MX28_PAD_LCD_D03__ETM_DA3			0x1032
-MX28_PAD_LCD_D04__ETM_DA4			0x1042
-MX28_PAD_LCD_D05__ETM_DA5			0x1052
-MX28_PAD_LCD_D06__ETM_DA6			0x1062
-MX28_PAD_LCD_D07__ETM_DA7			0x1072
-MX28_PAD_LCD_D08__ETM_DA8			0x1082
-MX28_PAD_LCD_D09__ETM_DA9			0x1092
-MX28_PAD_LCD_D10__ETM_DA10			0x10a2
-MX28_PAD_LCD_D11__ETM_DA11			0x10b2
-MX28_PAD_LCD_D12__ETM_DA12			0x10c2
-MX28_PAD_LCD_D13__ETM_DA13			0x10d2
-MX28_PAD_LCD_D14__ETM_DA14			0x10e2
-MX28_PAD_LCD_D15__ETM_DA15			0x10f2
-MX28_PAD_LCD_D16__ETM_DA7			0x1102
-MX28_PAD_LCD_D17__ETM_DA6			0x1112
-MX28_PAD_LCD_D18__ETM_DA5			0x1122
-MX28_PAD_LCD_D19__ETM_DA4			0x1132
-MX28_PAD_LCD_D20__ETM_DA3			0x1142
-MX28_PAD_LCD_D21__ETM_DA2			0x1152
-MX28_PAD_LCD_D22__ETM_DA1			0x1162
-MX28_PAD_LCD_D23__ETM_DA0			0x1172
-MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
-MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
-MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
-MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
-MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
-MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
-MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
-MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
-MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
-MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
-MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
-MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
-MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
-MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
-MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
-MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
-MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
-MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
-MX28_PAD_AUART0_RX__DUART_CTS			0x3002
-MX28_PAD_AUART0_TX__DUART_RTS			0x3012
-MX28_PAD_AUART0_CTS__DUART_RX			0x3022
-MX28_PAD_AUART0_RTS__DUART_TX			0x3032
-MX28_PAD_AUART1_RX__PWM_0			0x3042
-MX28_PAD_AUART1_TX__PWM_1			0x3052
-MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
-MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
-MX28_PAD_AUART2_RX__SSP3_D4			0x3082
-MX28_PAD_AUART2_TX__SSP3_D5			0x3092
-MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
-MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
-MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
-MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
-MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
-MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
-MX28_PAD_PWM0__DUART_RX				0x3102
-MX28_PAD_PWM1__DUART_TX				0x3112
-MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
-MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
-MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
-MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
-MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
-MX28_PAD_I2C0_SCL__DUART_RX			0x3182
-MX28_PAD_I2C0_SDA__DUART_TX			0x3192
-MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
-MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
-MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
-MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
-MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
-MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
-MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
-MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
-MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
-MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
-MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
-MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
-MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
-MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
-MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
-MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
-MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
-MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
-MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
-MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
-MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
-MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
-MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
-MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
-MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
-MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
-MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
-MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
-MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
-MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
-MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
-MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
-MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
-MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
-MX28_PAD_LCD_D00__GPIO_1_0			0x1003
-MX28_PAD_LCD_D01__GPIO_1_1			0x1013
-MX28_PAD_LCD_D02__GPIO_1_2			0x1023
-MX28_PAD_LCD_D03__GPIO_1_3			0x1033
-MX28_PAD_LCD_D04__GPIO_1_4			0x1043
-MX28_PAD_LCD_D05__GPIO_1_5			0x1053
-MX28_PAD_LCD_D06__GPIO_1_6			0x1063
-MX28_PAD_LCD_D07__GPIO_1_7			0x1073
-MX28_PAD_LCD_D08__GPIO_1_8			0x1083
-MX28_PAD_LCD_D09__GPIO_1_9			0x1093
-MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
-MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
-MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
-MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
-MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
-MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
-MX28_PAD_LCD_D16__GPIO_1_16			0x1103
-MX28_PAD_LCD_D17__GPIO_1_17			0x1113
-MX28_PAD_LCD_D18__GPIO_1_18			0x1123
-MX28_PAD_LCD_D19__GPIO_1_19			0x1133
-MX28_PAD_LCD_D20__GPIO_1_20			0x1143
-MX28_PAD_LCD_D21__GPIO_1_21			0x1153
-MX28_PAD_LCD_D22__GPIO_1_22			0x1163
-MX28_PAD_LCD_D23__GPIO_1_23			0x1173
-MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
-MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
-MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
-MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
-MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
-MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
-MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
-MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
-MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
-MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
-MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
-MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
-MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
-MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
-MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
-MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
-MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
-MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
-MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
-MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
-MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
-MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
-MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
-MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
-MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
-MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
-MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
-MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
-MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
-MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
-MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
-MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
-MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
-MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
-MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
-MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
-MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
-MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
-MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
-MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
-MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
-MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
-MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
-MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
-MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
-MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
-MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
-MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
-MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
-MX28_PAD_PWM0__GPIO_3_16			0x3103
-MX28_PAD_PWM1__GPIO_3_17			0x3113
-MX28_PAD_PWM2__GPIO_3_18			0x3123
-MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
-MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
-MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
-MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
-MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
-MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
-MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
-MX28_PAD_SPDIF__GPIO_3_27			0x31b3
-MX28_PAD_PWM3__GPIO_3_28			0x31c3
-MX28_PAD_PWM4__GPIO_3_29			0x31d3
-MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
-MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
-MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
-MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
-MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
-MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
-MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
-MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
-MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
-MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
-MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
-MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
-MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
-MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
-MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
-MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
-MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
-MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
-MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
-
-Valid values for i.MX23 pinmux-id:
-
-pinmux						id
-------						--
-MX23_PAD_GPMI_D00__GPMI_D00			0x0000
-MX23_PAD_GPMI_D01__GPMI_D01			0x0010
-MX23_PAD_GPMI_D02__GPMI_D02			0x0020
-MX23_PAD_GPMI_D03__GPMI_D03			0x0030
-MX23_PAD_GPMI_D04__GPMI_D04			0x0040
-MX23_PAD_GPMI_D05__GPMI_D05			0x0050
-MX23_PAD_GPMI_D06__GPMI_D06			0x0060
-MX23_PAD_GPMI_D07__GPMI_D07			0x0070
-MX23_PAD_GPMI_D08__GPMI_D08			0x0080
-MX23_PAD_GPMI_D09__GPMI_D09			0x0090
-MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
-MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
-MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
-MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
-MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
-MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
-MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
-MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
-MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
-MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
-MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
-MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
-MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
-MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
-MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
-MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
-MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
-MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
-MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
-MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
-MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
-MX23_PAD_LCD_D00__LCD_D00			0x1000
-MX23_PAD_LCD_D01__LCD_D01			0x1010
-MX23_PAD_LCD_D02__LCD_D02			0x1020
-MX23_PAD_LCD_D03__LCD_D03			0x1030
-MX23_PAD_LCD_D04__LCD_D04			0x1040
-MX23_PAD_LCD_D05__LCD_D05			0x1050
-MX23_PAD_LCD_D06__LCD_D06			0x1060
-MX23_PAD_LCD_D07__LCD_D07			0x1070
-MX23_PAD_LCD_D08__LCD_D08			0x1080
-MX23_PAD_LCD_D09__LCD_D09			0x1090
-MX23_PAD_LCD_D10__LCD_D10			0x10a0
-MX23_PAD_LCD_D11__LCD_D11			0x10b0
-MX23_PAD_LCD_D12__LCD_D12			0x10c0
-MX23_PAD_LCD_D13__LCD_D13			0x10d0
-MX23_PAD_LCD_D14__LCD_D14			0x10e0
-MX23_PAD_LCD_D15__LCD_D15			0x10f0
-MX23_PAD_LCD_D16__LCD_D16			0x1100
-MX23_PAD_LCD_D17__LCD_D17			0x1110
-MX23_PAD_LCD_RESET__LCD_RESET			0x1120
-MX23_PAD_LCD_RS__LCD_RS				0x1130
-MX23_PAD_LCD_WR__LCD_WR				0x1140
-MX23_PAD_LCD_CS__LCD_CS				0x1150
-MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
-MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
-MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
-MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
-MX23_PAD_PWM0__PWM0				0x11a0
-MX23_PAD_PWM1__PWM1				0x11b0
-MX23_PAD_PWM2__PWM2				0x11c0
-MX23_PAD_PWM3__PWM3				0x11d0
-MX23_PAD_PWM4__PWM4				0x11e0
-MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
-MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
-MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
-MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
-MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
-MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
-MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
-MX23_PAD_ROTARYA__ROTARYA			0x2070
-MX23_PAD_ROTARYB__ROTARYB			0x2080
-MX23_PAD_EMI_A00__EMI_A00			0x2090
-MX23_PAD_EMI_A01__EMI_A01			0x20a0
-MX23_PAD_EMI_A02__EMI_A02			0x20b0
-MX23_PAD_EMI_A03__EMI_A03			0x20c0
-MX23_PAD_EMI_A04__EMI_A04			0x20d0
-MX23_PAD_EMI_A05__EMI_A05			0x20e0
-MX23_PAD_EMI_A06__EMI_A06			0x20f0
-MX23_PAD_EMI_A07__EMI_A07			0x2100
-MX23_PAD_EMI_A08__EMI_A08			0x2110
-MX23_PAD_EMI_A09__EMI_A09			0x2120
-MX23_PAD_EMI_A10__EMI_A10			0x2130
-MX23_PAD_EMI_A11__EMI_A11			0x2140
-MX23_PAD_EMI_A12__EMI_A12			0x2150
-MX23_PAD_EMI_BA0__EMI_BA0			0x2160
-MX23_PAD_EMI_BA1__EMI_BA1			0x2170
-MX23_PAD_EMI_CASN__EMI_CASN			0x2180
-MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
-MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
-MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
-MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
-MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
-MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
-MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
-MX23_PAD_EMI_D00__EMI_D00			0x3000
-MX23_PAD_EMI_D01__EMI_D01			0x3010
-MX23_PAD_EMI_D02__EMI_D02			0x3020
-MX23_PAD_EMI_D03__EMI_D03			0x3030
-MX23_PAD_EMI_D04__EMI_D04			0x3040
-MX23_PAD_EMI_D05__EMI_D05			0x3050
-MX23_PAD_EMI_D06__EMI_D06			0x3060
-MX23_PAD_EMI_D07__EMI_D07			0x3070
-MX23_PAD_EMI_D08__EMI_D08			0x3080
-MX23_PAD_EMI_D09__EMI_D09			0x3090
-MX23_PAD_EMI_D10__EMI_D10			0x30a0
-MX23_PAD_EMI_D11__EMI_D11			0x30b0
-MX23_PAD_EMI_D12__EMI_D12			0x30c0
-MX23_PAD_EMI_D13__EMI_D13			0x30d0
-MX23_PAD_EMI_D14__EMI_D14			0x30e0
-MX23_PAD_EMI_D15__EMI_D15			0x30f0
-MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
-MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
-MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
-MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
-MX23_PAD_EMI_CLK__EMI_CLK			0x3140
-MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
-MX23_PAD_GPMI_D00__LCD_D8			0x0001
-MX23_PAD_GPMI_D01__LCD_D9			0x0011
-MX23_PAD_GPMI_D02__LCD_D10			0x0021
-MX23_PAD_GPMI_D03__LCD_D11			0x0031
-MX23_PAD_GPMI_D04__LCD_D12			0x0041
-MX23_PAD_GPMI_D05__LCD_D13			0x0051
-MX23_PAD_GPMI_D06__LCD_D14			0x0061
-MX23_PAD_GPMI_D07__LCD_D15			0x0071
-MX23_PAD_GPMI_D08__LCD_D18			0x0081
-MX23_PAD_GPMI_D09__LCD_D19			0x0091
-MX23_PAD_GPMI_D10__LCD_D20			0x00a1
-MX23_PAD_GPMI_D11__LCD_D21			0x00b1
-MX23_PAD_GPMI_D12__LCD_D22			0x00c1
-MX23_PAD_GPMI_D13__LCD_D23			0x00d1
-MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
-MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
-MX23_PAD_GPMI_CLE__LCD_D16			0x0101
-MX23_PAD_GPMI_ALE__LCD_D17			0x0111
-MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
-MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
-MX23_PAD_AUART1_RX__IR_RX			0x01c1
-MX23_PAD_AUART1_TX__IR_TX			0x01d1
-MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
-MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
-MX23_PAD_LCD_D00__ETM_DA8			0x1001
-MX23_PAD_LCD_D01__ETM_DA9			0x1011
-MX23_PAD_LCD_D02__ETM_DA10			0x1021
-MX23_PAD_LCD_D03__ETM_DA11			0x1031
-MX23_PAD_LCD_D04__ETM_DA12			0x1041
-MX23_PAD_LCD_D05__ETM_DA13			0x1051
-MX23_PAD_LCD_D06__ETM_DA14			0x1061
-MX23_PAD_LCD_D07__ETM_DA15			0x1071
-MX23_PAD_LCD_D08__ETM_DA0			0x1081
-MX23_PAD_LCD_D09__ETM_DA1			0x1091
-MX23_PAD_LCD_D10__ETM_DA2			0x10a1
-MX23_PAD_LCD_D11__ETM_DA3			0x10b1
-MX23_PAD_LCD_D12__ETM_DA4			0x10c1
-MX23_PAD_LCD_D13__ETM_DA5			0x10d1
-MX23_PAD_LCD_D14__ETM_DA6			0x10e1
-MX23_PAD_LCD_D15__ETM_DA7			0x10f1
-MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
-MX23_PAD_LCD_RS__ETM_TCLK			0x1131
-MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
-MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
-MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
-MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
-MX23_PAD_PWM0__ROTARYA				0x11a1
-MX23_PAD_PWM1__ROTARYB				0x11b1
-MX23_PAD_PWM2__GPMI_RDY3			0x11c1
-MX23_PAD_PWM3__ETM_TCTL				0x11d1
-MX23_PAD_PWM4__ETM_TCLK				0x11e1
-MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
-MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
-MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
-MX23_PAD_ROTARYA__AUART2_RTS			0x2071
-MX23_PAD_ROTARYB__AUART2_CTS			0x2081
-MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
-MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
-MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
-MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
-MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
-MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
-MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
-MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
-MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
-MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
-MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
-MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
-MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
-MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
-MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
-MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
-MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
-MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
-MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
-MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
-MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
-MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
-MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
-MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
-MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
-MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
-MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
-MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
-MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
-MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
-MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
-MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
-MX23_PAD_PWM0__DUART_RX				0x11a2
-MX23_PAD_PWM1__DUART_TX				0x11b2
-MX23_PAD_PWM3__AUART1_CTS			0x11d2
-MX23_PAD_PWM4__AUART1_RTS			0x11e2
-MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
-MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
-MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
-MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
-MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
-MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
-MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
-MX23_PAD_ROTARYA__SPDIF				0x2072
-MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
-MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
-MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
-MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
-MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
-MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
-MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
-MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
-MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
-MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
-MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
-MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
-MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
-MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
-MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
-MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
-MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
-MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
-MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
-MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
-MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
-MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
-MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
-MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
-MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
-MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
-MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
-MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
-MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
-MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
-MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
-MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
-MX23_PAD_LCD_D00__GPIO_1_0			0x1003
-MX23_PAD_LCD_D01__GPIO_1_1			0x1013
-MX23_PAD_LCD_D02__GPIO_1_2			0x1023
-MX23_PAD_LCD_D03__GPIO_1_3			0x1033
-MX23_PAD_LCD_D04__GPIO_1_4			0x1043
-MX23_PAD_LCD_D05__GPIO_1_5			0x1053
-MX23_PAD_LCD_D06__GPIO_1_6			0x1063
-MX23_PAD_LCD_D07__GPIO_1_7			0x1073
-MX23_PAD_LCD_D08__GPIO_1_8			0x1083
-MX23_PAD_LCD_D09__GPIO_1_9			0x1093
-MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
-MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
-MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
-MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
-MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
-MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
-MX23_PAD_LCD_D16__GPIO_1_16			0x1103
-MX23_PAD_LCD_D17__GPIO_1_17			0x1113
-MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
-MX23_PAD_LCD_RS__GPIO_1_19			0x1133
-MX23_PAD_LCD_WR__GPIO_1_20			0x1143
-MX23_PAD_LCD_CS__GPIO_1_21			0x1153
-MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
-MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
-MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
-MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
-MX23_PAD_PWM0__GPIO_1_26			0x11a3
-MX23_PAD_PWM1__GPIO_1_27			0x11b3
-MX23_PAD_PWM2__GPIO_1_28			0x11c3
-MX23_PAD_PWM3__GPIO_1_29			0x11d3
-MX23_PAD_PWM4__GPIO_1_30			0x11e3
-MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
-MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
-MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
-MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
-MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
-MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
-MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
-MX23_PAD_ROTARYA__GPIO_2_7			0x2073
-MX23_PAD_ROTARYB__GPIO_2_8			0x2083
-MX23_PAD_EMI_A00__GPIO_2_9			0x2093
-MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
-MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
-MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
-MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
-MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
-MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
-MX23_PAD_EMI_A07__GPIO_2_16			0x2103
-MX23_PAD_EMI_A08__GPIO_2_17			0x2113
-MX23_PAD_EMI_A09__GPIO_2_18			0x2123
-MX23_PAD_EMI_A10__GPIO_2_19			0x2133
-MX23_PAD_EMI_A11__GPIO_2_20			0x2143
-MX23_PAD_EMI_A12__GPIO_2_21			0x2153
-MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
-MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
-MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
-MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
-MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
-MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
-MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
-MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
-MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
-MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+Valid values for i.MX28/i.MX23 pinmux-id are defined in
+arch/arm/boot/dts/imx28-pinfunc.h and arch/arm/boot/dts/imx23-pinfunc.h.
+The definitions for the padconfig properties can be found in
+arch/arm/boot/dts/mxs-pinfunc.h.

arch/arm/boot/dts/Makefile

@@ -144,8 +144,10 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
@@ -161,6 +163,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10057.dtb \
 	imx28-cfa10058.dtb \
 	imx28-evk.dtb \
+	imx28-m28cu3.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb

arch/arm/boot/dts/imx23-evk.dts

@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale i.MX23 Evaluation Kit";
@@ -45,14 +45,14 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "i.MX23 Olinuxino Low Cost Board";
@@ -40,21 +40,21 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						MX23_PAD_GPMI_ALE__GPIO_0_17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx23-pinfunc.h

@@ -0,0 +1,333 @@
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */

arch/arm/boot/dts/imx23-stmp378x_devb.dts

@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale STMP378x Development Board";
@@ -39,12 +39,12 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};

arch/arm/boot/dts/imx23.dtsi

@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "imx23-pinfunc.h"
 
 / {
 	interrupt-parent = <&icoll>;
@@ -137,174 +138,174 @@
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a2 /* MX23_PAD_PWM0__DUART_RX */
-						0x11b2 /* MX23_PAD_PWM1__DUART_TX */
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
-						0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
-						0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
-						0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
-						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
-						0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
-						0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
-						0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
-						0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
-						0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
-						0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
-						0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
-						0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
-						0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
-						0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
-						0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
-						0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N	*/
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_fixup: gpmi-pins-fixup {
 					fsl,pinmux-ids = <
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
 					>;
-					fsl,drive-strength = <2>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
 				};
 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
-						0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
-						0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
-						0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_pins_fixup: mmc0-pins-fixup {
 					fsl,pinmux-ids = <
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,pull-up = <0>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11c0 /* MX23_PAD_PWM2__PWM2 */
+						MX23_PAD_PWM2__PWM2
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
-						0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
-						0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
-						0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
-						0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
-						0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
-						0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
-						0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
-						0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
-						0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
-						0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
-						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
-						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
-						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx27-apf27dev.dts

@@ -16,6 +16,26 @@
 	model = "Armadeus Systems APF27Dev docking/development board";
 	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
 
+	display: display {
+		model = "Chimei-LW700AT9003";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xfae80083>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <640>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,6 +70,12 @@
 	status = "okay";
 };
 
+&fb {
+	display = <&display>;
+	fsl,dmacr = <0x00020010>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	status = "okay";

arch/arm/boot/dts/imx27.dtsi

@@ -123,6 +123,7 @@
 			};
 
 			pwm: pwm@10006000 {
+				#pwm-cells = <2>;
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;

arch/arm/boot/dts/imx28-apf28.dts

@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Armadeus Systems APF28 module";

arch/arm/boot/dts/imx28-apf28dev.dts

@@ -10,7 +10,7 @@
  */
 
 /* APF28Dev is a docking board for the APF28 SOM */
-/include/ "imx28-apf28.dts"
+#include "imx28-apf28.dts"
 
 / {
 	model = "Armadeus Systems APF28Dev docking/development board";
@@ -41,30 +41,30 @@
 				hog_pins_apf28dev: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
-						0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
-						0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
-						0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
-						0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+						MX28_PAD_LCD_D16__GPIO_1_16
+						MX28_PAD_LCD_D17__GPIO_1_17
+						MX28_PAD_LCD_D18__GPIO_1_18
+						MX28_PAD_LCD_D19__GPIO_1_19
+						MX28_PAD_LCD_D20__GPIO_1_20
+						MX28_PAD_LCD_D21__GPIO_1_21
+						MX28_PAD_LCD_D22__GPIO_1_22
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx28-apx4devkit.dts

@@ -1,5 +1,5 @@
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Bluegiga APX4 Development Kit";
@@ -40,53 +40,53 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
-						0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
-						0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_RDY1__GPIO_0_21
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_JTAG_RTCK__GPIO_4_20
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_apx4: lcdif-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
-						0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
-						0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
-						0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
-						0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
 					fsl,pinmux-ids = <
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
-					fsl,drive-strength = <2>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx28-cfa10036.dts

@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
@@ -26,31 +26,31 @@
 				ssd1306_cfa10036: ssd1306-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+						MX28_PAD_SSP0_DATA7__GPIO_2_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pins_cfa10036: leds-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+						MX28_PAD_AUART1_RX__GPIO_3_4
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usb0_otg_cfa10036: otg-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+						MX28_PAD_GPMI_RDY0__USB0_ID
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 			};

arch/arm/boot/dts/imx28-cfa10037.dts

@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10037 Board";
@@ -25,21 +25,21 @@
 				usb_pins_cfa10037: usb-10037@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mac0_pins_cfa10037: mac0-10037@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+						MX28_PAD_SSP2_SS2__GPIO_2_21
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};

arch/arm/boot/dts/imx28-cfa10049.dts

@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10049 Board";
@@ -25,150 +25,150 @@
 				usb_pins_cfa10049: usb-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				i2cmux_pins_cfa10049: i2cmux-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
-						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_LCD_D23__GPIO_1_23
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mac0_pins_cfa10049: mac0-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+						MX28_PAD_SSP2_SS2__GPIO_2_21
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pca_pins_cfa10049: pca-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+						MX28_PAD_SSP2_SS0__GPIO_2_19
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				rotary_pins_cfa10049: rotary-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi2_pins_cfa10049: spi2-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi3_pins_cfa10049: spi3-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
-						0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
-						0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
+						MX28_PAD_GPMI_RDN__GPIO_0_24
+						MX28_PAD_GPMI_RESETN__GPIO_0_28
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_ALE__GPIO_0_26
+						MX28_PAD_GPMI_CLE__GPIO_0_27
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10049: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				w1_gpio_pins: w1-gpio@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+						MX28_PAD_LCD_D21__GPIO_1_21
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>; /* 0 will enable the keeper */
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
 				};
 			};
 

arch/arm/boot/dts/imx28-cfa10055.dts

@@ -14,7 +14,7 @@
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10055 Board";
@@ -26,64 +26,64 @@
 				spi2_pins_cfa10055: spi2-cfa10055@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10055: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx28-cfa10056.dts

@@ -13,7 +13,7 @@
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10056 Board";
@@ -25,37 +25,37 @@
 				spi2_pins_cfa10056: spi2-cfa10056@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				lcdif_pins_cfa10056: lcdif-10056@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx28-cfa10057.dts

@@ -14,7 +14,7 @@
  * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10057 Board";
@@ -26,51 +26,51 @@
 				usb_pins_cfa10057: usb-10057@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10057: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx28-cfa10058.dts

@@ -14,7 +14,7 @@
  * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10058 Board";
@@ -26,24 +26,24 @@
 				usb_pins_cfa10058: usb-10058@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10058: lcdif-10058@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx28-evk.dts

@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Freescale i.MX28 Evaluation Kit";
@@ -70,52 +70,52 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
-						0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
-						0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
-						0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
-						0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
+						MX28_PAD_SSP1_CMD__GPIO_2_13
+						MX28_PAD_SSP1_DATA3__GPIO_2_15
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+						MX28_PAD_SSP1_SCK__GPIO_2_12
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_AUART2_TX__GPIO_3_9
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio3_5: led_gpio3_5@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_evk: gpmi-nand-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+						MX28_PAD_GPMI_CE1N__GPMI_CE1N
+						MX28_PAD_GPMI_RDY1__GPMI_READY1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_evk: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -182,6 +182,7 @@
 			};
 
 			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
 				status = "okay";
 			};
 
@@ -242,6 +243,8 @@
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_id_pins_a>;
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};

arch/arm/boot/dts/imx28-m28cu3.dts

@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "gpmi-nfc-0-boot";
+					reg = <0x00000000 0x01400000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "gpmi-nfc-general-use";
+					reg = <0x01400000 0x0ec00000>;
+				};
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_a
+					     &mmc2_cd_cfg
+					     &mmc2_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS0__GPIO_2_19
+						MX28_PAD_PWM4__GPIO_3_29
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_VSYNC__LCD_VSYNC
+						MX28_PAD_LCD_HSYNC__LCD_HSYNC
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_RESET__LCD_RESET
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_gpio: leds-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_MISO__GPIO_2_26
+						MX28_PAD_SSP3_SCK__GPIO_2_24
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ocotp@8002c000 {
+				status = "okay";
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				display = <&display>;
+				reset-active-high;
+				status = "okay";
+
+				display: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <6410256>;
+							hactive = <320>;
+							vactive = <240>;
+							hback-porch = <38>;
+							hfront-porch = <20>;
+							vback-porch = <15>;
+							vfront-porch = <5>;
+							hsync-len = <30>;
+							vsync-len = <3>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_2pins_b>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy1_pins_a>;
+			disable-over-current;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 0>;
+		};
+
+		reg_vddio_sd1: vddio-sd1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 19 0>;
+		};
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
+	};
+};

arch/arm/boot/dts/imx28-m28evk.dts

@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "DENX M28EVK";
@@ -92,26 +92,26 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
-						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
-						0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
-						0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_AUART2_CTS__GPIO_3_10
+						MX28_PAD_AUART2_RTS__GPIO_3_11
+						MX28_PAD_AUART3_RX__GPIO_3_12
+						MX28_PAD_AUART3_TX__GPIO_3_13
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_m28: lcdif-m28@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
-						0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_ENABLE__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx28-pinfunc.h

@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */

arch/arm/boot/dts/imx28-sps1.dts

@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "SchulerControl GmbH, SC SPS 1";
@@ -29,13 +29,13 @@
 				hog_pins_a: hog-gpios@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
-						0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
-						0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+						MX28_PAD_GPMI_D00__GPIO_0_0
+						MX28_PAD_GPMI_D03__GPIO_0_3
+						MX28_PAD_GPMI_D06__GPIO_0_6
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 			};

arch/arm/boot/dts/imx28-tx28.dts

@@ -1,106 +1,139 @@
+/*
+ * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Ka-Ro electronics TX28 module";
 	compatible = "karo,tx28", "fsl,imx28";
 
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		display = &display;
+		ds1339 = &ds1339;
+		gpio5 = &gpio5;
+		lcdif = &lcdif;
+		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
+		lcdif_24bit_pins = &lcdif_24bit_pins_a;
+		stk5led = &user_led;
+		usbotg = &usb0;
+	};
+
 	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
+		reg = <0 0>; /* will be filled in by U-Boot */
+	};
 
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				mac0_pins_gpio: mac0-gpio-mode@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
-						0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
-						0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
-						0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
-						0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
-						0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
-						0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
-						0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
-						0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-			};
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio2 7 0>;
+		status = "disabled";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 18 0>;
+			enable-active-high;
 		};
 
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 27 0>;
+			enable-active-high;
+		};
 
-				ds1339: rtc@68 {
-					compatible = "mxim,ds1339";
-					reg = <0x68>;
-				};
-			};
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
 
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm0_pins_a>;
-				status = "okay";
-			};
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
 
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_4pins_a>;
-				status = "okay";
-			};
+		reg_can_xcvr: can-xcvr {
+			compatible = "regulator-fixed";
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 0 0>;
+			enable-active-low;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+		};
 
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
+		reg_lcd: lcd-power {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 31 0>;
+			enable-active-high;
+		};
+
+		reg_lcd_reset: lcd-reset {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD RESET";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 0>;
+			startup-delay-us = <300000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default", "gpio_mode";
-			pinctrl-0 = <&mac0_pins_a>;
-			pinctrl-1 = <&mac0_pins_gpio>;
-			status = "okay";
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
 		};
 	};
 
+	sound {
+		compatible = "fsl,imx28-tx28-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-tx28-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		user {
+		user_led: user {
 			label = "Heartbeat";
 			gpios = <&gpio4 10 0>;
 			linux,default-trigger = "heartbeat";
@@ -109,8 +142,512 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
+		pwms = <&pwm 0 500000>;
+		/*
+		 * a silly way to create a 1:1 relationship between the
+		 * PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	matrix_keypad: matrix-keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		col-gpios = <
+			&gpio5 0 0
+			&gpio5 1 0
+			&gpio5 2 0
+			&gpio5 3 0
+		>;
+		row-gpios = <
+			&gpio5 4 0
+			&gpio5 5 0
+			&gpio5 6 0
+			&gpio5 7 0
+		>;
+		/* sample keymap */
+		linux,keymap = <
+			0x00000074 /* row 0, col 0, KEY_POWER */
+			0x00010052 /* row 0, col 1, KEY_KP0 */
+			0x0002004f /* row 0, col 2, KEY_KP1 */
+			0x00030050 /* row 0, col 3, KEY_KP2 */
+			0x01000051 /* row 1, col 0, KEY_KP3 */
+			0x0101004b /* row 1, col 1, KEY_KP4 */
+			0x0102004c /* row 1, col 2, KEY_KP5 */
+			0x0103004d /* row 1, col 3, KEY_KP6 */
+			0x02000047 /* row 2, col 0, KEY_KP7 */
+			0x02010048 /* row 2, col 1, KEY_KP8 */
+			0x02020049 /* row 2, col 2, KEY_KP9 */
+		>;
+		gpio-activelow;
+		linux,wakeup;
+		debounce-delay-ms = <100>;
+		col-scan-delay-us = <5000>;
+		linux,no-autorepeat;
+	};
+};
+
+/* 2nd TX-Std UART - (A)UART1  */
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+/* 3rd TX-Std UART - (A)UART3  */
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&digctl {
+	status = "okay";
+};
+
+/* 1st TX-Std UART - (D)UART */
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&mclk>;
+	};
+
+	gpio5: pca953x@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_pca9554_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <28 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 0>;
+		reset-gpios = <&gpio2 6 1>;
+		wake-gpios = <&gpio4 9 0>;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_tsc2007_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 0>;
+		pendown-gpio = <&gpio3 20 1>;
+		ti,x-plate-ohms = /bits/ 16 <660>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "mxim,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display>;
+	status = "okay";
+
+	display: display@0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		display-timings {
+			native-mode = <&timing5>;
+			timing0: timing0 {
+				panel-name = "VGA";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing1: timing1 {
+				panel-name = "ETV570";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing2: timing2 {
+				panel-name = "ET0350";
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing3: timing3 {
+				panel-name = "ET0430";
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing4: timing4 {
+				panel-name = "ET0500", "ET0700";
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing5: timing5 {
+				panel-name = "ETQ570";
+				clock-frequency = <6400000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default", "gpio_mode";
+	pinctrl-0 = <&mac0_pins_a>;
+	pinctrl-1 = <&tx28_mac0_pins_gpio>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	/* not enabled by default */
+};
+
+&mxs_rtc {
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__GPIO_1_0
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
+		fsl,pinmux-ids = <
+			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_pca9554_pins: tx28-pca9554-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_tsc2007_pins: tx28-tsc2007-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+
+	tx28_usbphy0_pins: tx28-usbphy0-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_usbphy1_pins: tx28-usbphy1-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_b>;
+	fsl,saif-master;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default", "special";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	clock-frequency = <57600000>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <57600000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <57600000>;
 	};
 };
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy0_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy1_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};

arch/arm/boot/dts/imx28.dtsi

@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "imx28-pinfunc.h"
 
 / {
 	interrupt-parent = <&icoll>;
@@ -207,538 +208,579 @@
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3102 /* MX28_PAD_PWM0__DUART_RX */
-						0x3112 /* MX28_PAD_PWM1__DUART_TX */
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				duart_pins_b: duart@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				duart_4pins_a: duart-4pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
-						0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
-						0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
-						0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
-						0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
-						0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
-						0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
-						0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
-						0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
-						0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
-						0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
-						0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
-						0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_status_cfg: gpmi-status-cfg {
 					fsl,pinmux-ids = <
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
-					fsl,drive-strength = <2>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
 				};
 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
-						0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
-						0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart1_pins_a: auart1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
-						0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
-						0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart1_2pins_a: auart1-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart2_2pins_a: auart2-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
-						0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart2_2pins_b: auart2-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
-						0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
-						0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
-						0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_2pins_a: auart3-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
-						0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_2pins_b: auart3-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart4_2pins_a: auart4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
-						0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
-						0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
-						0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
-						0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
-						0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
-						0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
-						0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
-						0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
-						0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mac1_pins_a: mac1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
-						0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
-						0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
-						0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
-						0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
-						0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
-						0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
-						0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
-						0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_cd_cfg: mmc0-cd-cfg {
 					fsl,pinmux-ids = <
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 					>;
-					fsl,pull-up = <0>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mmc0_sck_cfg: mmc0-sck-cfg {
 					fsl,pinmux-ids = <
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <2>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_4bit_pins_a: mmc2-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg: mmc2-sck-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				i2c0_pins_a: i2c0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
-						0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				i2c0_pins_b: i2c0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
-						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				i2c1_pins_a: i2c1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
-						0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
-						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
-						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
-						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif0_pins_b: saif0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
-						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
-						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif1_pins_a: saif1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				pwm0_pins_a: pwm0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3100 /* MX28_PAD_PWM0__PWM_0 */
+						MX28_PAD_PWM0__PWM_0
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3120 /* MX28_PAD_PWM2__PWM_2 */
+						MX28_PAD_PWM2__PWM_2
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm3_pins_a: pwm3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+						MX28_PAD_PWM3__PWM_3
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm3_pins_b: pwm3@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
+						MX28_PAD_SAIF0_MCLK__PWM_3
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm4_pins_a: pwm4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+						MX28_PAD_PWM4__PWM_4
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
-						0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
-						0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
-						0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
-						0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
-						0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
-						0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_16bit_pins_a: lcdif-16bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_sync_pins_a: lcdif-sync@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				can0_pins_a: can0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
-						0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				can1_pins_a: can1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
-						0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
-						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
-						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
-						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi3_pins_a: spi3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
-						0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
-						0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
-						0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
-						0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
-						0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy0_pins_a: usbphy0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy0_pins_b: usbphy0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy1_pins_a: usbphy1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 

arch/arm/boot/dts/imx51-apf51dev.dts

@@ -16,6 +16,33 @@
 	model = "Armadeus Systems APF51Dev docking/development board";
 	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
 
+	display@di1 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+
+		display-timings {
+			lw700 {
+				native-mode;
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 

arch/arm/boot/dts/imx51-babbage.dts

@@ -27,6 +27,20 @@
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: dvi {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
 
 	display@di1 {
@@ -35,6 +49,25 @@
 		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -95,7 +128,7 @@
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
@@ -252,7 +285,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };

arch/arm/boot/dts/imx51.dtsi

@@ -86,6 +86,11 @@
 		interrupt-parent = <&tzic>;
 		ranges;
 
+		iram: iram@1ffe0000 {
+			compatible = "mmio-sram";
+			reg = <0x1ffe0000 0x20000>;
+		};
+
 		ipu: ipu@40000000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx51-ipu";
@@ -374,6 +379,14 @@
 				clocks = <&clks 107>;
 			};
 
+			owire: owire@83fa4000 {
+				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
+				reg = <0x83fa4000 0x4000>;
+				interrupts = <88>;
+				clocks = <&clks 159>;
+				status = "disabled";
+			};
+
 			ecspi2: ecspi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -747,6 +760,11 @@
 			fsl,pins = <
 				MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
 				MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+			>;
+		};
+
+		pinctrl_uart1_rtscts_1: uart1rtscts-1 {
+			fsl,pins = <
 				MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
 				MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
 			>;
@@ -767,6 +785,11 @@
 			fsl,pins = <
 				MX51_PAD_EIM_D25__UART3_RXD 0x1c5
 				MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+			>;
+		};
+
+		pinctrl_uart3_rtscts_1: uart3rtscts-1 {
+			fsl,pins = <
 				MX51_PAD_EIM_D27__UART3_RTS 0x1c5
 				MX51_PAD_EIM_D24__UART3_CTS 0x1c5
 			>;

arch/arm/boot/dts/imx53-qsb.dts

@@ -55,19 +55,20 @@
 			label = "Power Button";
 			gpios = <&gpio1 8 0>;
 			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
 		};
 
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 0>;
 			linux,code = <115>; /* KEY_VOLUMEUP */
+			gpio-key,wakeup;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 0>;
 			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			gpio-key,wakeup;
 		};
 	};
 
@@ -122,7 +123,6 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1_1>;
-	cd-gpios = <&gpio3 13 0>;
 	status = "okay";
 };
 
@@ -136,6 +136,7 @@
 	pinctrl-0 = <&pinctrl_esdhc3_1>;
 	cd-gpios = <&gpio3 11 0>;
 	wp-gpios = <&gpio3 12 0>;
+	bus-width = <8>;
 	status = "okay";
 };
 
@@ -152,7 +153,6 @@
 				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
 				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
 				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13       0x80000000
 				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
 				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
 				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
@@ -318,5 +318,6 @@
 };
 
 &usbotg {
-       status = "okay";
+	dr_mode = "peripheral";
+	status = "okay";
 };

arch/arm/boot/dts/imx6q-pinfunc.h

@@ -536,7 +536,7 @@
 #define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
 #define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
 #define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
 #define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
 #define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
 #define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
@@ -654,7 +654,7 @@
 #define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
 #define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
 #define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
 #define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
 #define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
 #define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0

arch/arm/boot/dts/imx6q-sabrelite.dts

@@ -65,8 +65,10 @@
 	};
 };
 
-&sata {
+&audmux {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
 };
 
 &ecspi1 {
@@ -83,11 +85,29 @@
 	};
 };
 
-&ssi1 {
-	fsl,mode = "i2s-slave";
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
 	status = "okay";
 };
 
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -103,28 +123,61 @@
 				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
 				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
 			>;
 		};
 	};
 };
 
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
 &usbh1 {
 	status = "okay";
 };
 
-&fec {
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
 	status = "okay";
 };
 
@@ -145,30 +198,3 @@
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};

arch/arm/boot/dts/imx6q-udoo.dts

@@ -0,0 +1,39 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Quad Board";
+	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	non-removable;
+	status = "okay";
+};

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -54,6 +54,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
 				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
 			>;
 		};
 	};
@@ -74,8 +75,10 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
 	cd-gpios = <&gpio6 15 0>;
 	wp-gpios = <&gpio1 13 0>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -80,6 +80,14 @@
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
 };
 
 &audmux {
@@ -108,6 +116,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
 	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 0>;
 	status = "okay";
 };
 
@@ -172,6 +181,7 @@
 				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
 				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
 			>;
 		};
 	};
@@ -202,6 +212,12 @@
 	};
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_1>;
+	status = "okay";
+};
+
 &ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
@@ -229,6 +245,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	bus-width = <8>;
 	cd-gpios = <&gpio2 2 0>;
 	wp-gpios = <&gpio2 3 0>;
 	status = "okay";
@@ -237,6 +254,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	bus-width = <8>;
 	cd-gpios = <&gpio2 0 0>;
 	wp-gpios = <&gpio2 1 0>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

@@ -43,6 +43,13 @@
 		mux-int-port = <1>;
 		mux-ext-port = <3>;
 	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
 };
 
 &audmux {
@@ -81,6 +88,7 @@
 				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
 				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
 				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x80000000
 			>;
 		};
 	};
@@ -90,6 +98,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
 	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 29 0>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif_3>;
 	status = "okay";
 };
 
@@ -115,6 +130,14 @@
 	status = "okay";
 };
 
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1_2>;

arch/arm/boot/dts/imx6qdl.dtsi

@@ -116,6 +116,22 @@
 			arm,data-latency = <4 2 3>;
 		};
 
+		pcie: pcie@0x01000000 {
+			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			reg = <0x01ffc000 0x4000>; /* DBI */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
+				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <0 123 0x04>;
+			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
+			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+			status = "disabled";
+		};
+
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
 			interrupts = <0 94 0x04>;
@@ -136,8 +152,23 @@
 				ranges;
 
 				spdif: spdif@02004000 {
+					compatible = "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 0x04>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks 197>, <&clks 3>,
+						 <&clks 197>, <&clks 107>,
+						 <&clks 0>,   <&clks 118>,
+						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>;
+					clock-names = "core",  "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7";
+					status = "disabled";
 				};
 
 				ecspi1: ecspi@02008000 {
@@ -1010,6 +1041,12 @@
 							MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
 						>;
 					};
+
+					pinctrl_spdif_3: spdifgrp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
+						>;
+					};
 				};
 
 				uart1 {
@@ -1184,6 +1221,36 @@
 						>;
 					};
 
+					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+						>;
+					};
+
 					pinctrl_usdhc3_2: usdhc3grp-2 {
 						fsl,pins = <
 							MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059

arch/arm/boot/dts/imx6sl-evk.dts

@@ -17,6 +17,44 @@
 	memory {
 		reg = <0x80000000 0x40000000>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb_otg1_vbus: usb_otg1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 0>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: usb_otg2_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 0>;
+			enable-active-high;
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 11 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &fec {
@@ -38,6 +76,8 @@
 				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
 				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
 				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
 			>;
 		};
 	};
@@ -49,9 +89,26 @@
 	status = "okay";
 };
 
-&usdhc1 {
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1_1>;
+	pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
 	bus-width = <8>;
 	cd-gpios = <&gpio4 7 0>;
 	wp-gpios = <&gpio4 6 0>;
@@ -59,16 +116,20 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
 	cd-gpios = <&gpio5 0 0>;
 	wp-gpios = <&gpio4 29 0>;
 	status = "okay";
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
 	cd-gpios = <&gpio3 22 0>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6sl.dtsi

@@ -13,16 +13,20 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
 	};
 
 	cpus {
@@ -528,10 +532,26 @@
 				interrupts = <0 89 0x04>;
 			};
 
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6sl-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6sl-iomuxc";
 				reg = <0x020e0000 0x4000>;
 
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
+							MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
+							MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
+						>;
+					};
+				};
+
 				fec {
 					pinctrl_fec_1: fecgrp-1 {
 						fsl,pins = <
@@ -557,6 +577,64 @@
 					};
 				};
 
+				usbotg1 {
+					pinctrl_usbotg1_1: usbotg1grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_2: usbotg1grp-2 {
+						fsl,pins = <
+							MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_3: usbotg1grp-3 {
+						fsl,pins = <
+							MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_4: usbotg1grp-4 {
+						fsl,pins = <
+							MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_5: usbotg1grp-5 {
+						fsl,pins = <
+							MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059
+						>;
+					};
+				};
+
+				usbotg2 {
+					pinctrl_usbotg2_1: usbotg2grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_2: usbotg2grp-2 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_3: usbotg2grp-3 {
+						fsl,pins = <
+							MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_4: usbotg2grp-4 {
+						fsl,pins = <
+							MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059
+						>;
+					};
+				};
+
 				usdhc1 {
 					pinctrl_usdhc1_1: usdhc1grp-1 {
 						fsl,pins = <
@@ -572,6 +650,38 @@
 							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
 						>;
 					};
+
+					pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
+							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
+							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
+							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
+							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
+							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
+							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
+							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
+							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
+							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
+							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
+							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
+							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
+							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
+							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
+						>;
+					};
+
+
 				};
 
 				usdhc2 {
@@ -585,6 +695,29 @@
 							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
 						>;
 					};
+
+					pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170b9
+							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100b9
+							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170f9
+							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100f9
+							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+						>;
+					};
+
 				};
 
 				usdhc3 {
@@ -598,6 +731,28 @@
 							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
 						>;
 					};
+
+					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170b9
+							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100b9
+							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170f9
+							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100f9
+							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+						>;
+					};
 				};
 			};
 
@@ -619,7 +774,8 @@
 					 <&clks IMX6SL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin";
+				/* imx6sl reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 
 			pxp: pxp@020f0000 {
@@ -663,7 +819,7 @@
 			usbotg2: usb@02184200 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
+				interrupts = <0 42 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
@@ -673,7 +829,7 @@
 			usbh: usb@02184400 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
-				interrupts = <0 42 0x04>;
+				interrupts = <0 40 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";

arch/arm/boot/dts/mxs-pinfunc.h

@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */

arch/arm/boot/dts/vf610-cosmic.dts

@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clocks {
+		enet_ext {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1_1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};

arch/arm/boot/dts/vf610-twr.dts

@@ -36,6 +36,23 @@
 
 };
 
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0_1>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
 &fec0 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";

arch/arm/boot/dts/vf610.dtsi

@@ -123,6 +123,18 @@
 				status = "disabled";
 			};
 
+			dspi0: dspi0@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <0 67 0x04>;
+				clocks = <&clks VF610_CLK_DSPI0>;
+				clock-names = "dspi";
+				spi-num-chipselects = <5>;
+				status = "disabled";
+			};
+
 			sai2: sai@40031000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;

arch/arm/mach-mxs/mach-mxs.c

@@ -332,6 +332,11 @@ static void __init crystalfontz_init(void)
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }
 
+static void __init m28cu3_init(void)
+{
+	update_fec_mac_prop(OUI_DENX);
+}
+
 static const char __init *mxs_get_soc_id(void)
 {
 	struct device_node *np;
@@ -459,6 +464,8 @@ static void __init mxs_machine_init(void)
 		apx4devkit_init();
 	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
 		crystalfontz_init();
+	else if (of_machine_is_compatible("msr,m28cu3"))
+		m28cu3_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     NULL, parent);