Merge branch 'devel-omap5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/newsoc

From Tony Lindgren <tony@atomide.com>:

This branch contains minimal support for omap5 to boot to a
console without clock framework support. This branch depends
on omap-cleanup-part2-for-v3.6.

* 'devel-omap5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: Kconfig update to support additional GPIOs in OMAP5
  ARM: OMAP5: Add the build support
  arm/dts: OMAP5: Add omap5 dts files
  ARM: OMAP5: board-generic: Add device tree support
  ARM: omap2+: board-generic: clean up the irq data from board file
  ARM: OMAP5: Add SMP support
  ARM: OMAP5: Add the WakeupGen IP updates
  ARM: OMAP5: l3: Add l3 error handler support for omap5
  ARM: OMAP5: gpmc: Update gpmc_init()
  ARM: OMAP5: timer: Add clocksource, clockevent support
  ARM: OMAP5: Add minimal support for OMAP5430 SOC
  ARM: OMAP5: id: Add cpu id for ES versions
  ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme
  ARM: OMAP2+: Move stubbed secure_sram_reserve function to a common.c and call it __weak

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -47,3 +47,6 @@ Boards:
 
 - AM335X EVM : Software Developement Board for AM335x
   compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+
+- OMAP5 EVM : Evaluation Module
+  compatible = "ti,omap5-evm", "ti,omap5"

arch/arm/Kconfig

@@ -1595,6 +1595,7 @@ config ARCH_NR_GPIO
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 355 if ARCH_U8500
 	default 264 if MACH_H4700
+	default 512 if SOC_OMAP5
 	default 0
 	help
 	  Maximum number of GPIOs in the system.

arch/arm/boot/dts/omap5-evm.dts

@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap5.dtsi"
+
+/ {
+	model = "TI OMAP5 EVM board";
+	compatible = "ti,omap5-evm", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

arch/arm/boot/dts/omap5.dtsi

@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+		gic: interrupt-controller@48211000 {
+			compatible = "arm,cortex-a15-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x48211000 0x1000>,
+			      <0x48212000 0x1000>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap5-uart";
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap6-uart";
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+		};
+	};
+};

arch/arm/configs/omap2plus_defconfig

@@ -236,3 +236,4 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
+CONFIG_SOC_OMAP5=y

arch/arm/mach-omap2/Kconfig

@@ -9,7 +9,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select REGULATOR
 	select PM_RUNTIME
 	select VFP
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
 	select SERIAL_OMAP
 	select SERIAL_OMAP_CONSOLE
 	select I2C
@@ -61,6 +61,12 @@ config ARCH_OMAP4
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
 
+config SOC_OMAP5
+	bool "TI OMAP5"
+	select CPU_V7
+	select ARM_GIC
+	select HAVE_SMP
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 

arch/arm/mach-omap2/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
+obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
@@ -29,8 +30,10 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o
-obj-$(CONFIG_ARCH_OMAP4)		+= sleep44xx.o
+omap-4-5-common				=  omap4-common.o omap-wakeupgen.o \
+					   sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common)
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -70,6 +73,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= cpuidle34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
 obj-$(CONFIG_ARCH_OMAP4)		+= cpuidle44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
@@ -85,14 +89,16 @@ endif
 endif
 
 # PRCM
+omap-prcm-4-5-common			=  prcm.o cminst44xx.o cm44xx.o \
+					   prcm_mpu44xx.o prminst44xx.o \
+					   vc44xx_data.o vp44xx_data.o
 obj-y					+= prm_common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cminst44xx.o cm44xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= prcm_mpu44xx.o prminst44xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= vc44xx_data.o vp44xx_data.o prm44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= prcm.o prm33xx.o cm33xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common) prm44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o
@@ -104,6 +110,7 @@ obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(voltagedomain-common)
 obj-$(CONFIG_SOC_AM33XX)                += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(voltagedomain-common)
 
 # OMAP powerdomain framework
 powerdomain-common			+= powerdomain.o powerdomain-common.o
@@ -121,6 +128,8 @@ obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
+obj-$(CONFIG_SOC_OMAP5)			+= powerdomain44xx.o
 
 # PRCM clockdomain control
 clockdomain-common			+= clockdomain.o
@@ -139,6 +148,8 @@ obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
+obj-$(CONFIG_SOC_OMAP5)			+= clockdomain44xx.o
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
@@ -157,6 +168,8 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
+obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
@@ -184,6 +197,7 @@ obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 # L3 interconnect
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_l3_smx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_l3_noc.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap_l3_noc.o
 
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o

arch/arm/mach-omap2/board-generic.c

@@ -25,23 +25,12 @@
 #include "common-board-devices.h"
 
 #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
-#define omap_intc_of_init	NULL
+#define intc_of_init	NULL
 #endif
 #ifndef CONFIG_ARCH_OMAP4
 #define gic_of_init		NULL
 #endif
 
-static struct of_device_id irq_match[] __initdata = {
-	{ .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ }
-};
-
-static void __init omap_init_irq(void)
-{
-	of_irq_init(irq_match);
-}
-
 static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "ti,omap-infra", },
@@ -65,7 +54,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
@@ -84,7 +73,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
@@ -103,7 +92,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap3_timer,
@@ -122,7 +111,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= am33xx_map_io,
 	.init_early	= am33xx_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap3_am33xx_timer,
@@ -140,7 +129,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_gic_of_init,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap4430_init_late,
@@ -149,3 +138,22 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.restart	= omap_prcm_restart,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_SOC_OMAP5
+static const char *omap5_boards_compat[] __initdata = {
+	"ti,omap5",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap5_map_io,
+	.init_early	= omap5_init_early,
+	.init_irq	= omap_gic_of_init,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap5_timer,
+	.dt_compat	= omap5_boards_compat,
+	.restart	= omap_prcm_restart,
+MACHINE_END
+#endif

arch/arm/mach-omap2/common.c

@@ -178,3 +178,27 @@ void __init omap4_map_io(void)
 }
 #endif
 
+#if defined(CONFIG_SOC_OMAP5)
+static struct omap_globals omap5_globals = {
+	.class	= OMAP54XX_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
+	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
+	.prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
+};
+
+void __init omap2_set_globals_5xxx(void)
+{
+	omap2_set_globals_tap(&omap5_globals);
+	omap2_set_globals_control(&omap5_globals);
+	omap2_set_globals_prcm(&omap5_globals);
+}
+
+void __init omap5_map_io(void)
+{
+	omap5_map_common_io();
+}
+#endif

arch/arm/mach-omap2/common.h

@@ -115,6 +115,14 @@ static inline int omap_mux_late_init(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+extern void omap5_map_common_io(void);
+#else
+static inline void omap5_map_common_io(void)
+{
+}
+#endif
+
 extern void omap2_init_common_infrastructure(void);
 
 extern struct sys_timer omap2_timer;
@@ -122,6 +130,7 @@ extern struct sys_timer omap3_timer;
 extern struct sys_timer omap3_secure_timer;
 extern struct sys_timer omap3_am33xx_timer;
 extern struct sys_timer omap4_timer;
+extern struct sys_timer omap5_timer;
 
 void omap2420_init_early(void);
 void omap2430_init_early(void);
@@ -134,6 +143,7 @@ void am35xx_init_early(void);
 void ti81xx_init_early(void);
 void am33xx_init_early(void);
 void omap4430_init_early(void);
+void omap5_init_early(void);
 void omap3_init_late(void);	/* Do not use this one */
 void omap4430_init_late(void);
 void omap2420_init_late(void);
@@ -169,6 +179,7 @@ void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_3xxx(void);
 void omap2_set_globals_443x(void);
+void omap2_set_globals_5xxx(void);
 void omap2_set_globals_ti81xx(void);
 void omap2_set_globals_am33xx(void);
 
@@ -188,6 +199,7 @@ void omap243x_map_io(void);
 void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
+void omap5_map_io(void);
 void ti81xx_map_io(void);
 void omap_barriers_init(void);
 
@@ -227,6 +239,8 @@ void omap3_intc_prepare_idle(void);
 void omap3_intc_resume_idle(void);
 void omap2_intc_handle_irq(struct pt_regs *regs);
 void omap3_intc_handle_irq(struct pt_regs *regs);
+void omap_intc_of_init(void);
+void omap_gic_of_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
 extern void __iomem *omap4_get_l2cache_base(void);
@@ -234,10 +248,10 @@ extern void __iomem *omap4_get_l2cache_base(void);
 
 struct device_node;
 #ifdef CONFIG_OF
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
 			     struct device_node *parent);
 #else
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
 			     struct device_node *parent)
 {
 	return 0;
@@ -264,6 +278,7 @@ extern void omap_secondary_startup(void);
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
 extern u32 omap_read_auxcoreboot0(void);
+extern void omap5_secondary_startup(void);
 #endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)

arch/arm/mach-omap2/control.h

@@ -253,6 +253,10 @@
 /* TI81XX CONTROL_DEVCONF register offsets */
 #define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
 
+/* OMAP54XX CONTROL STATUS register */
+#define OMAP5XXX_CONTROL_STATUS                0x134
+#define OMAP5_DEVICETYPE_MASK          (0x7 << 6)
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.

arch/arm/mach-omap2/devices.c

@@ -84,7 +84,7 @@ static int __init omap4_l3_init(void)
 	 * To avoid code running on other OMAPs in
 	 * multi-omap builds
 	 */
-	if (!(cpu_is_omap44xx()))
+	if (!cpu_is_omap44xx() && !soc_is_omap54xx())
 		return -ENODEV;
 
 	for (i = 0; i < L3_MODULES; i++) {

arch/arm/mach-omap2/gpmc.c

@@ -727,7 +727,8 @@ static int __init gpmc_init(void)
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
 		gpmc_irq = INT_34XX_GPMC_IRQ;
-	} else if (cpu_is_omap44xx()) {
+	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+		/* Base address and irq number are same for OMAP4/5 */
 		ck = "gpmc_ck";
 		l = OMAP44XX_GPMC_BASE;
 		gpmc_irq = OMAP44XX_IRQ_GPMC;

arch/arm/mach-omap2/id.c

@@ -50,6 +50,11 @@ int omap_type(void)
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
 	} else if (cpu_is_omap44xx()) {
 		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
+	} else if (soc_is_omap54xx()) {
+		val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
+		val &= OMAP5_DEVICETYPE_MASK;
+		val >>= 6;
+		goto out;
 	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
@@ -100,7 +105,7 @@ static u16 tap_prod_id;
 
 void omap_get_die_id(struct omap_die_id *odi)
 {
-	if (cpu_is_omap44xx()) {
+	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
 		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
 		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@@ -513,6 +518,41 @@ void __init omap4xxx_check_revision(void)
 		((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
 }
 
+void __init omap5xxx_check_revision(void)
+{
+	u32 idcode;
+	u16 hawkeye;
+	u8 rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+	switch (hawkeye) {
+	case 0xb942:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = OMAP5430_REV_ES1_0;
+		}
+		break;
+
+	case 0xb998:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = OMAP5432_REV_ES1_0;
+		}
+		break;
+
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		omap_revision = OMAP5430_REV_ES1_0;
+	}
+
+	pr_info("OMAP%04x ES%d.0\n",
+			omap_rev() >> 16, ((omap_rev() >> 12) & 0xf));
+}
+
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -60,12 +60,12 @@ omap_uart_lsr:	.word	0
 		beq	23f			@ configure OMAP2UART3
 		cmp	\rp, #OMAP3UART3	@ only on 34xx
 		beq	33f			@ configure OMAP3UART3
-		cmp	\rp, #OMAP4UART3	@ only on 44xx
-		beq	43f			@ configure OMAP4UART3
+		cmp	\rp, #OMAP4UART3	@ only on 44xx/54xx
+		beq	43f			@ configure OMAP4/5UART3
 		cmp	\rp, #OMAP3UART4	@ only on 36xx
 		beq	34f			@ configure OMAP3UART4
-		cmp	\rp, #OMAP4UART4	@ only on 44xx
-		beq	44f			@ configure OMAP4UART4
+		cmp	\rp, #OMAP4UART4	@ only on 44xx/54xx
+		beq	44f			@ configure OMAP4/5UART4
 		cmp	\rp, #TI81XXUART1	@ ti81Xx UART offsets different
 		beq	81f			@ configure UART1
 		cmp	\rp, #TI81XXUART2	@ ti81Xx UART offsets different

arch/arm/mach-omap2/include/mach/omap-wakeupgen.h

@@ -11,15 +11,20 @@
 #ifndef OMAP_ARCH_WAKEUPGEN_H
 #define OMAP_ARCH_WAKEUPGEN_H
 
+/* OMAP4 and OMAP5 has same base address */
+#define OMAP_WKUPGEN_BASE			0x48281000
+
 #define OMAP_WKG_CONTROL_0			0x00
 #define OMAP_WKG_ENB_A_0			0x10
 #define OMAP_WKG_ENB_B_0			0x14
 #define OMAP_WKG_ENB_C_0			0x18
 #define OMAP_WKG_ENB_D_0			0x1c
+#define OMAP_WKG_ENB_E_0			0x20
 #define OMAP_WKG_ENB_A_1			0x410
 #define OMAP_WKG_ENB_B_1			0x414
 #define OMAP_WKG_ENB_C_1			0x418
 #define OMAP_WKG_ENB_D_1			0x41c
+#define OMAP_WKG_ENB_E_1			0x420
 #define OMAP_AUX_CORE_BOOT_0			0x800
 #define OMAP_AUX_CORE_BOOT_1			0x804
 #define OMAP_PTMSYNCREQ_MASK			0xc00
@@ -28,4 +33,6 @@
 #define OMAP_TIMESTAMPCYCLEHI			0xc0c
 
 extern int __init omap_wakeupgen_init(void);
+extern void __iomem *omap_get_wakeupgen_base(void);
+extern int omap_secure_apis_support(void);
 #endif

arch/arm/mach-omap2/io.c

@@ -233,6 +233,35 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 };
 #endif
 
+#ifdef	CONFIG_SOC_OMAP5
+static struct map_desc omap54xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_54XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_54XX_PHYS),
+		.length		= L3_54XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_54XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_54XX_PHYS),
+		.length		= L4_54XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WK_54XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_54XX_PHYS),
+		.length		= L4_WK_54XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER_54XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_54XX_PHYS),
+		.length		= L4_PER_54XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
+
 #ifdef CONFIG_SOC_OMAP2420
 void __init omap242x_map_common_io(void)
 {
@@ -278,6 +307,12 @@ void __init omap44xx_map_common_io(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+void __init omap5_map_common_io(void)
+{
+	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
+}
+#endif
 /*
  * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
  *
@@ -513,6 +548,15 @@ void __init omap4430_init_late(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+void __init omap5_init_early(void)
+{
+	omap2_set_globals_5xxx();
+	omap5xxx_check_revision();
+	omap_common_init_early();
+}
+#endif
+
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
 {

arch/arm/mach-omap2/iomap.h

@@ -1,6 +1,14 @@
 /*
  * IO mappings for OMAP2+
  *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -166,4 +174,23 @@
 						/* 0x49000000 --> 0xfb000000 */
 #define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_ABE_44XX_SIZE	SZ_1M
+/*
+ * ----------------------------------------------------------------------------
+ * Omap5 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+#define L3_54XX_PHYS		L3_54XX_BASE	/* 0x44000000 --> 0xf8000000 */
+#define L3_54XX_VIRT		(L3_54XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_54XX_SIZE		SZ_1M
+
+#define L4_54XX_PHYS		L4_54XX_BASE	/* 0x4a000000 --> 0xfc000000 */
+#define L4_54XX_VIRT		(L4_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_54XX_SIZE		SZ_4M
+
+#define L4_WK_54XX_PHYS		L4_WK_54XX_BASE	/* 0x4ae00000 --> 0xfce00000 */
+#define L4_WK_54XX_VIRT		(L4_WK_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_54XX_SIZE		SZ_2M
 
+#define L4_PER_54XX_PHYS	L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_PER_54XX_VIRT	(L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_54XX_SIZE	SZ_4M

arch/arm/mach-omap2/irq.c

@@ -21,6 +21,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <mach/hardware.h>
 
@@ -258,7 +259,7 @@ asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs
 	omap_intc_handle_irq(base_addr, regs);
 }
 
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
 			     struct device_node *parent)
 {
 	struct resource res;
@@ -280,6 +281,16 @@ int __init omap_intc_of_init(struct device_node *node,
 	return 0;
 }
 
+static struct of_device_id irq_match[] __initdata = {
+	{ .compatible = "ti,omap2-intc", .data = intc_of_init, },
+	{ }
+};
+
+void __init omap_intc_of_init(void)
+{
+	of_irq_init(irq_match);
+}
+
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 

arch/arm/mach-omap2/omap-headsmp.S

@@ -19,6 +19,27 @@
 #include <linux/init.h>
 
 	__CPUINIT
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define AUX_CORE_BOOT0_PA			0x48281800
+
+/*
+ * OMAP5 specific entry point for secondary CPU to jump from ROM
+ * code.  This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update this flag using a hardware
++ * register AuxCoreBoot0.
+ */
+ENTRY(omap5_secondary_startup)
+wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
+	ldr	r0, [r2]
+	mov	r0, r0, lsr #5
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	wait
+	b	secondary_startup
+END(omap5_secondary_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which

arch/arm/mach-omap2/omap-hotplug.c

@@ -17,8 +17,10 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
+#include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <mach/omap-wakeupgen.h>
 
 #include "common.h"
 
@@ -35,7 +37,8 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void __ref platform_cpu_die(unsigned int cpu)
 {
-	unsigned int this_cpu;
+	unsigned int boot_cpu = 0;
+	void __iomem *base = omap_get_wakeupgen_base();
 
 	flush_cache_all();
 	dsb();
@@ -43,16 +46,27 @@ void __ref platform_cpu_die(unsigned int cpu)
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
-	if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
-		pr_err("Secure clear status failed\n");
+	if (omap_secure_apis_support()) {
+		if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
+			pr_err("Secure clear status failed\n");
+	} else {
+		__raw_writel(0, base + OMAP_AUX_CORE_BOOT_0);
+	}
+
 
 	for (;;) {
 		/*
 		 * Enter into low power state
 		 */
 		omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
-		this_cpu = smp_processor_id();
-		if (omap_read_auxcoreboot0() == this_cpu) {
+
+		if (omap_secure_apis_support())
+			boot_cpu = omap_read_auxcoreboot0();
+		else
+			boot_cpu =
+				__raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5;
+
+		if (boot_cpu == smp_processor_id()) {
 			/*
 			 * OK, proper wakeup, we're done
 			 */

arch/arm/mach-omap2/omap-smp.c

@@ -26,11 +26,19 @@
 
 #include <mach/hardware.h>
 #include <mach/omap-secure.h>
+#include <mach/omap-wakeupgen.h>
+#include <asm/cputype.h>
 
 #include "iomap.h"
 #include "common.h"
 #include "clockdomain.h"
 
+#define CPU_MASK		0xff0ffff0
+#define CPU_CORTEX_A9		0x410FC090
+#define CPU_CORTEX_A15		0x410FC0F0
+
+#define OMAP5_CORE_COUNT	0x2
+
 /* SCU base address */
 static void __iomem *scu_base;
 
@@ -73,6 +81,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	static struct clockdomain *cpu1_clkdm;
 	static bool booted;
+	void __iomem *base = omap_get_wakeupgen_base();
+
 	/*
 	 * Set synchronisation state between this boot processor
 	 * and the secondary one
@@ -85,7 +95,11 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+	if (omap_secure_apis_support())
+		omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+	else
+		__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
+
 	flush_cache_all();
 	smp_wmb();
 
@@ -124,13 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init wakeup_secondary(void)
 {
+	void __iomem *base = omap_get_wakeupgen_base();
 	/*
 	 * Write the address of secondary startup routine into the
 	 * AuxCoreBoot1 where ROM code will jump and start executing
 	 * on secondary core once out of WFE
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
+	if (omap_secure_apis_support())
+		omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
+	else
+		__raw_writel(virt_to_phys(omap5_secondary_startup),
+						base + OMAP_AUX_CORE_BOOT_1);
+
 	smp_wmb();
 
 	/*
@@ -147,16 +167,21 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores;
-
-	/*
-	 * Currently we can't call ioremap here because
-	 * SoC detection won't work until after init_early.
-	 */
-	scu_base =  OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
-	BUG_ON(!scu_base);
-
-	ncores = scu_get_core_count(scu_base);
+	unsigned int i = 0, ncores = 1, cpu_id;
+
+	/* Use ARM cpuid check here, as SoC detection will not work so early */
+	cpu_id = read_cpuid(CPUID_ID) & CPU_MASK;
+	if (cpu_id == CPU_CORTEX_A9) {
+		/*
+		 * Currently we can't call ioremap here because
+		 * SoC detection won't work until after init_early.
+		 */
+		scu_base =  OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
+		BUG_ON(!scu_base);
+		ncores = scu_get_core_count(scu_base);
+	} else if (cpu_id == CPU_CORTEX_A15) {
+		ncores = OMAP5_CORE_COUNT;
+	}
 
 	/* sanity check */
 	if (ncores > nr_cpu_ids) {
@@ -178,6 +203,7 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	 * Initialise the SCU and wake up the secondary core using
 	 * wakeup_secondary().
 	 */
-	scu_enable(scu_base);
+	if (scu_base)
+		scu_enable(scu_base);
 	wakeup_secondary();
 }

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -33,18 +33,23 @@
 #include "omap4-sar-layout.h"
 #include "common.h"
 
-#define NR_REG_BANKS		4
-#define MAX_IRQS		128
+#define MAX_NR_REG_BANKS	5
+#define MAX_IRQS		160
 #define WKG_MASK_ALL		0x00000000
 #define WKG_UNMASK_ALL		0xffffffff
 #define CPU_ENA_OFFSET		0x400
 #define CPU0_ID			0x0
 #define CPU1_ID			0x1
+#define OMAP4_NR_BANKS		4
+#define OMAP4_NR_IRQS		128
 
 static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_SPINLOCK(wakeupgen_lock);
 static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_banks = MAX_NR_REG_BANKS;
+static unsigned int max_irqs = MAX_IRQS;
+static unsigned int omap_secure_apis;
 
 /*
  * Static helper functions.
@@ -146,13 +151,13 @@ static void wakeupgen_unmask(struct irq_data *d)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
+static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks);
 
 static void _wakeupgen_save_masks(unsigned int cpu)
 {
 	u8 i;
 
-	for (i = 0; i < NR_REG_BANKS; i++)
+	for (i = 0; i < irq_banks; i++)
 		per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
 }
 
@@ -160,7 +165,7 @@ static void _wakeupgen_restore_masks(unsigned int cpu)
 {
 	u8 i;
 
-	for (i = 0; i < NR_REG_BANKS; i++)
+	for (i = 0; i < irq_banks; i++)
 		wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
 }
 
@@ -168,7 +173,7 @@ static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
 {
 	u8 i;
 
-	for (i = 0; i < NR_REG_BANKS; i++)
+	for (i = 0; i < irq_banks; i++)
 		wakeupgen_writel(reg, i, cpu);
 }
 
@@ -196,25 +201,14 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
 #endif
 
 #ifdef CONFIG_CPU_PM
-/*
- * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
- * ROM code. WakeupGen IP is integrated along with GIC to manage the
- * interrupt wakeups from CPU low power states. It manages
- * masking/unmasking of Shared peripheral interrupts(SPI). So the
- * interrupt enable/disable control should be in sync and consistent
- * at WakeupGen and GIC so that interrupts are not lost.
- */
-static void irq_save_context(void)
+static inline void omap4_irq_save_context(void)
 {
 	u32 i, val;
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		return;
 
-	if (!sar_base)
-		sar_base = omap4_get_sar_ram_base();
-
-	for (i = 0; i < NR_REG_BANKS; i++) {
+	for (i = 0; i < irq_banks; i++) {
 		/* Save the CPUx interrupt mask for IRQ 0 to 127 */
 		val = wakeupgen_readl(i, 0);
 		sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
@@ -254,6 +248,53 @@ static void irq_save_context(void)
 	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
 	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
 	__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+
+}
+
+static inline void omap5_irq_save_context(void)
+{
+	u32 i, val;
+
+	for (i = 0; i < irq_banks; i++) {
+		/* Save the CPUx interrupt mask for IRQ 0 to 159 */
+		val = wakeupgen_readl(i, 0);
+		sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU0, i);
+		val = wakeupgen_readl(i, 1);
+		sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU1, i);
+		sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
+		sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
+	}
+
+	/* Save AuxBoot* registers */
+	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
+	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
+
+	/* Set the Backup Bit Mask status */
+	val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
+	__raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+
+}
+
+/*
+ * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
+ * ROM code. WakeupGen IP is integrated along with GIC to manage the
+ * interrupt wakeups from CPU low power states. It manages
+ * masking/unmasking of Shared peripheral interrupts(SPI). So the
+ * interrupt enable/disable control should be in sync and consistent
+ * at WakeupGen and GIC so that interrupts are not lost.
+ */
+static void irq_save_context(void)
+{
+	if (!sar_base)
+		sar_base = omap4_get_sar_ram_base();
+
+	if (soc_is_omap54xx())
+		omap5_irq_save_context();
+	else
+		omap4_irq_save_context();
 }
 
 /*
@@ -262,9 +303,14 @@ static void irq_save_context(void)
 static void irq_sar_clear(void)
 {
 	u32 val;
-	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+	u32 offset = SAR_BACKUP_STATUS_OFFSET;
+
+	if (soc_is_omap54xx())
+		offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
+
+	val = __raw_readl(sar_base + offset);
 	val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+	__raw_writel(val, sar_base + offset);
 }
 
 /*
@@ -336,13 +382,25 @@ static struct notifier_block irq_notifier_block = {
 
 static void __init irq_pm_init(void)
 {
-	cpu_pm_register_notifier(&irq_notifier_block);
+	/* FIXME: Remove this when MPU OSWR support is added */
+	if (!soc_is_omap54xx())
+		cpu_pm_register_notifier(&irq_notifier_block);
 }
 #else
 static void __init irq_pm_init(void)
 {}
 #endif
 
+void __iomem *omap_get_wakeupgen_base(void)
+{
+	return wakeupgen_base;
+}
+
+int omap_secure_apis_support(void)
+{
+	return omap_secure_apis;
+}
+
 /*
  * Initialise the wakeupgen module.
  */
@@ -358,12 +416,18 @@ int __init omap_wakeupgen_init(void)
 	}
 
 	/* Static mapping, never released */
-	wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
+	wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
 	if (WARN_ON(!wakeupgen_base))
 		return -ENOMEM;
 
+	if (cpu_is_omap44xx()) {
+		irq_banks = OMAP4_NR_BANKS;
+		max_irqs = OMAP4_NR_IRQS;
+		omap_secure_apis = 1;
+	}
+
 	/* Clear all IRQ bitmasks at wakeupGen level */
-	for (i = 0; i < NR_REG_BANKS; i++) {
+	for (i = 0; i < irq_banks; i++) {
 		wakeupgen_writel(0, i, CPU0_ID);
 		wakeupgen_writel(0, i, CPU1_ID);
 	}
@@ -382,7 +446,7 @@ int __init omap_wakeupgen_init(void)
 	 */
 
 	/* Associate all the IRQs to boot CPU like GIC init does. */
-	for (i = 0; i < NR_IRQS; i++)
+	for (i = 0; i < max_irqs; i++)
 		irq_target_cpu[i] = boot_cpu;
 
 	irq_hotplug_init();

arch/arm/mach-omap2/omap4-common.c

@@ -21,6 +21,8 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
@@ -210,6 +212,18 @@ static int __init omap4_sar_ram_init(void)
 }
 early_initcall(omap4_sar_ram_init);
 
+static struct of_device_id irq_match[] __initdata = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
+	{ }
+};
+
+void __init omap_gic_of_init(void)
+{
+	omap_wakeupgen_init();
+	of_irq_init(irq_match);
+}
+
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {

arch/arm/mach-omap2/omap4-sar-layout.h

@@ -12,7 +12,7 @@
 #define OMAP_ARCH_OMAP4_SAR_LAYOUT_H
 
 /*
- * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE
+ * SAR BANK offsets from base address OMAP44XX/54XX_SAR_RAM_BASE
  */
 #define SAR_BANK1_OFFSET		0x0000
 #define SAR_BANK2_OFFSET		0x1000
@@ -47,4 +47,14 @@
 #define PTMSYNCREQ_EN_OFFSET			(SAR_BANK3_OFFSET + 0x6d0)
 #define SAR_BACKUP_STATUS_WAKEUPGEN		0x10
 
+/* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x8d4)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0	(SAR_BANK3_OFFSET + 0x8e8)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU1		(SAR_BANK3_OFFSET + 0x8fc)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1	(SAR_BANK3_OFFSET + 0x910)
+#define OMAP5_AUXCOREBOOT0_OFFSET		(SAR_BANK3_OFFSET + 0x924)
+#define OMAP5_AUXCOREBOOT1_OFFSET		(SAR_BANK3_OFFSET + 0x928)
+#define OMAP5_AMBA_IF_MODE_OFFSET		(SAR_BANK3_OFFSET + 0x92c)
+#define OMAP5_SAR_BACKUP_STATUS_OFFSET		(SAR_BANK3_OFFSET + 0x800)
+
 #endif

arch/arm/mach-omap2/omap_hwmod.c

@@ -3619,7 +3619,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
-	} else if (cpu_is_omap44xx()) {
+	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;

arch/arm/mach-omap2/omap_l3_noc.h

@@ -51,7 +51,9 @@ static u32 l3_targ_inst_clk1[] = {
 	0x200, /* DMM2 */
 	0x300, /* ABE */
 	0x400, /* L4CFG */
-	0x600  /* CLK2 PWR DISC */
+	0x600,  /* CLK2 PWR DISC */
+	0x0,	/* Host CLK1 */
+	0x900	/* L4 Wakeup */
 };
 
 static u32 l3_targ_inst_clk2[] = {
@@ -72,11 +74,16 @@ static u32 l3_targ_inst_clk2[] = {
 	0xE00, /* missing in TRM corresponds to AES2*/
 	0xC00, /* L4 PER3 */
 	0xA00, /* L4 PER1*/
-	0xB00 /* L4 PER2*/
+	0xB00, /* L4 PER2*/
+	0x0, /* HOST CLK2 */
+	0x1800, /* CAL */
+	0x1700 /* LLI */
 };
 
 static u32 l3_targ_inst_clk3[] = {
-	0x0100	/* EMUSS */
+	0x0100	/* EMUSS */,
+	0x0300, /* DEBUGSS_CT_TBR */
+	0x0 /* HOST CLK3 */
 };
 
 static struct l3_masters_data {
@@ -110,13 +117,15 @@ static struct l3_masters_data {
 	{ 0xC8, "USBHOSTFS"}
 };
 
-static char *l3_targ_inst_name[L3_MODULES][18] = {
+static char *l3_targ_inst_name[L3_MODULES][21] = {
 	{
 		"DMM1",
 		"DMM2",
 		"ABE",
 		"L4CFG",
 		"CLK2 PWR DISC",
+		"HOST CLK1",
+		"L4 WAKEUP"
 	},
 	{
 		"CORTEX M3" ,
@@ -137,9 +146,14 @@ static char *l3_targ_inst_name[L3_MODULES][18] = {
 		"L4 PER3",
 		"L4 PER1",
 		"L4 PER2",
+		"HOST CLK2",
+		"CAL",
+		"LLI"
 	},
 	{
 		"EMUSS",
+		"DEBUG SOURCE",
+		"HOST CLK3"
 	},
 };
 

arch/arm/mach-omap2/prcm-common.h

@@ -416,7 +416,7 @@ extern void __iomem *cm_base;
 extern void __iomem *cm2_base;
 extern void __iomem *prcm_mpu_base;
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 extern void omap_prm_base_init(void);
 extern void omap_cm_base_init(void);
 #else

arch/arm/mach-omap2/prcm.c

@@ -160,7 +160,7 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 	if (omap2_globals->prcm_mpu)
 		prcm_mpu_base = omap2_globals->prcm_mpu;
 
-	if (cpu_is_omap44xx()) {
+	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		omap_prm_base_init();
 		omap_cm_base_init();
 	}

arch/arm/mach-omap2/timer.c

@@ -393,6 +393,11 @@ static void __init omap4_timer_init(void)
 OMAP_SYS_TIMER(4)
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+OMAP_SYS_TIMER_INIT(5, 1, OMAP4_CLKEV_SOURCE, 2, OMAP4_MPU_SOURCE)
+OMAP_SYS_TIMER(5)
+#endif
+
 /**
  * omap_timer_init - build and register timer device with an
  * associated timer hwmod

arch/arm/plat-omap/Kconfig

@@ -29,7 +29,7 @@ config ARCH_OMAP2PLUS
 	select USE_OF
 	select PROC_DEVICETREE if PROC_FS
 	help
-	  "Systems based on OMAP2, OMAP3 or OMAP4"
+	  "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
 
 endchoice
 
@@ -150,7 +150,7 @@ config OMAP_32K_TIMER
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
+	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
 
 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"

arch/arm/plat-omap/common.c

@@ -77,3 +77,12 @@ void __init omap_init_consistent_dma_size(void)
 	init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
 #endif
 }
+
+/*
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
+ */
+int __weak omap_secure_ram_reserve_memblock(void)
+{
+	return 0;
+}

arch/arm/plat-omap/counter_32k.c

@@ -29,7 +29,10 @@
 #include <plat/clock.h>
 
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
-#define OMAP2_32KSYNCNT_CR_OFF		0x10
+#define OMAP2_32KSYNCNT_REV_OFF		0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
 
 /*
  * 32KHz clocksource ... always available, on pretty most chips except
@@ -84,9 +87,16 @@ int __init omap_init_clocksource_32k(void __iomem *vbase)
 	int ret;
 
 	/*
-	 * 32k sync Counter register offset is at 0x10
+	 * 32k sync Counter IP register offsets vary between the
+	 * highlander version and the legacy ones.
+	 * The 'SCHEME' bits(30-31) of the revision register is used
+	 * to identify the version.
 	 */
-	sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF;
+	if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+						OMAP2_32KSYNCNT_REV_SCHEME)
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
+	else
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
 
 	/*
 	 * 120000 rough estimate from the calculations in

arch/arm/plat-omap/include/plat/cpu.h

@@ -9,7 +9,7 @@
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
- * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -70,6 +70,7 @@ unsigned int omap_rev(void);
  * cpu_is_omap443x():	True for OMAP4430
  * cpu_is_omap446x():	True for OMAP4460
  * cpu_is_omap447x():	True for OMAP4470
+ * soc_is_omap543x():	True for OMAP5430, OMAP5432
  */
 #define GET_OMAP_CLASS	(omap_rev() & 0xff)
 
@@ -122,6 +123,7 @@ IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
 IS_OMAP_CLASS(44xx, 0x44)
 IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
 IS_AM_CLASS(33xx, 0x33)
 
 IS_TI_CLASS(81xx, 0x81)
@@ -133,6 +135,7 @@ IS_OMAP_SUBCLASS(363x, 0x363)
 IS_OMAP_SUBCLASS(443x, 0x443)
 IS_OMAP_SUBCLASS(446x, 0x446)
 IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
 
 IS_TI_SUBCLASS(816x, 0x816)
 IS_TI_SUBCLASS(814x, 0x814)
@@ -156,6 +159,8 @@ IS_AM_SUBCLASS(335x, 0x335)
 #define cpu_is_omap443x()		0
 #define cpu_is_omap446x()		0
 #define cpu_is_omap447x()		0
+#define soc_is_omap54xx()		0
+#define soc_is_omap543x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -291,6 +296,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2430()		0
 #define cpu_is_omap3430()		0
 #define cpu_is_omap3630()		0
+#define soc_is_omap5430()		0
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -371,11 +377,18 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_omap447x()		is_omap447x()
 # endif
 
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx()		is_omap54xx()
+# define soc_is_omap543x()		is_omap543x()
+#endif
+
 /* Macros to detect if we have OMAP1 or OMAP2 */
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx())
+				cpu_is_omap44xx() || soc_is_omap54xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -428,9 +441,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP447X_CLASS		0x44700044
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
 
+#define OMAP54XX_CLASS		0x54000054
+#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
 void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
 void omap3xxx_check_features(void);
 void ti81xx_check_features(void);
 void omap4xxx_check_features(void);

arch/arm/plat-omap/include/plat/hardware.h

@@ -288,5 +288,6 @@
 #include <plat/omap44xx.h>
 #include <plat/ti81xx.h>
 #include <plat/am33xx.h>
+#include <plat/omap54xx.h>
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */

arch/arm/plat-omap/include/plat/multi.h

@@ -99,4 +99,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap5
+# endif
+#endif
+
 #endif	/* __PLAT_OMAP_MULTI_H */

arch/arm/plat-omap/include/plat/omap-secure.h

@@ -3,12 +3,7 @@
 
 #include <linux/types.h>
 
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 extern int omap_secure_ram_reserve_memblock(void);
-#else
-static inline void omap_secure_ram_reserve_memblock(void)
-{ }
-#endif
 
 #ifdef CONFIG_OMAP4_ERRATA_I688
 extern int omap_barrier_reserve_memblock(void);

arch/arm/plat-omap/include/plat/omap54xx.h

@@ -0,0 +1,32 @@
+/*:
+ * Address mappings and base address for OMAP5 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_SOC_OMAP54XX_H
+#define __ASM_SOC_OMAP54XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_54XX_BASE			0x4a000000
+#define L4_WK_54XX_BASE			0x4ae00000
+#define L4_PER_54XX_BASE		0x48000000
+#define L3_54XX_BASE			0x44000000
+#define OMAP54XX_32KSYNCT_BASE		0x4ae04000
+#define OMAP54XX_CM_CORE_AON_BASE	0x4a004000
+#define OMAP54XX_CM_CORE_BASE		0x4a008000
+#define OMAP54XX_PRM_BASE		0x4ae06000
+#define OMAP54XX_PRCM_MPU_BASE		0x48243000
+#define OMAP54XX_SCM_BASE		0x4a002000
+#define OMAP54XX_CTRL_BASE		0x4a002800
+
+#endif /* __ASM_SOC_OMAP555554XX_H */

arch/arm/plat-omap/include/plat/serial.h

@@ -63,6 +63,14 @@
 /* AM33XX serial port */
 #define AM33XX_UART1_BASE	0x44E09000
 
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE	0x48066000
+#define OMAP5_UART6_BASE	0x48068000
+
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
 #define ZOOM_UART_VIRT		0xfa400000
@@ -97,6 +105,8 @@
 #define TI81XXUART2		82
 #define TI81XXUART3		83
 #define AM33XXUART1		84
+#define OMAP5UART3		OMAP4UART3
+#define OMAP5UART4		OMAP4UART4
 #define ZOOM_UART		95		/* Only on zoom2/3 */
 
 /* This is only used by 8250.c for omap1510 */

arch/arm/plat-omap/include/plat/uncompress.h

@@ -95,6 +95,9 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		OMAP4UART##p)
 
+#define DEBUG_LL_OMAP5(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP5UART##p)
 /* Zoom2/3 shift is different for UART1 and external port */
 #define DEBUG_LL_ZOOM(mach)						\
 	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
@@ -177,6 +180,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP4(3, omap_4430sdp);
 		DEBUG_LL_OMAP4(3, omap4_panda);
 
+		/* omap5 based boards using UART3 */
+		DEBUG_LL_OMAP5(3, omap5_sevm);
+
 		/* zoom2/3 external uart */
 		DEBUG_LL_ZOOM(omap_zoom2);
 		DEBUG_LL_ZOOM(omap_zoom3);

arch/arm/plat-omap/sram.c

@@ -6,8 +6,8 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -44,6 +44,7 @@
 #else
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #endif
+#define OMAP5_SRAM_PA		0x40300000
 
 #if defined(CONFIG_ARCH_OMAP2PLUS)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -118,6 +119,9 @@ static void __init omap_detect_sram(void)
 			} else if (cpu_is_omap44xx()) {
 				omap_sram_start = OMAP4_SRAM_PUB_PA;
 				omap_sram_size = 0xa000; /* 40K */
+			} else if (soc_is_omap54xx()) {
+				omap_sram_start = OMAP5_SRAM_PA;
+				omap_sram_size = SZ_128K; /* 128KB */
 			} else {
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
 				omap_sram_size = 0x800; /* 2K */
@@ -132,6 +136,9 @@ static void __init omap_detect_sram(void)
 			} else if (cpu_is_omap44xx()) {
 				omap_sram_start = OMAP4_SRAM_PA;
 				omap_sram_size = 0xe000; /* 56K */
+			} else if (soc_is_omap54xx()) {
+				omap_sram_start = OMAP5_SRAM_PA;
+				omap_sram_size = SZ_128K; /* 128KB */
 			} else {
 				omap_sram_start = OMAP2_SRAM_PA;
 				if (cpu_is_omap242x())