wl12xx: AP-mode - set STA HT capabilities when adding a STA

In addition, set global HT operation mode via ACX_HT_BSS_OPERATION when
a change is detected by usermode

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/wl12xx/acx.c

@@ -1309,13 +1309,15 @@ out:
 
 int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
 				    struct ieee80211_sta_ht_cap *ht_cap,
-				    bool allow_ht_operation)
+				    bool allow_ht_operation, u8 hlid)
 {
 	struct wl1271_acx_ht_capabilities *acx;
 	int ret = 0;
 	u32 ht_capabilites = 0;
 
-	wl1271_debug(DEBUG_ACX, "acx ht capabilities setting");
+	wl1271_debug(DEBUG_ACX, "acx ht capabilities setting "
+		     "sta supp: %d sta cap: %d", ht_cap->ht_supported,
+		     ht_cap->cap);
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 	if (!acx) {
@@ -1323,7 +1325,7 @@ int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
 		goto out;
 	}
 
-	if (allow_ht_operation) {
+	if (allow_ht_operation && ht_cap->ht_supported) {
 		/* no need to translate capabilities - use the spec values */
 		ht_capabilites = ht_cap->cap;
 
@@ -1338,7 +1340,7 @@ int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
 		acx->ampdu_min_spacing = ht_cap->ampdu_density;
 	}
 
-	acx->hlid = wl->sta_hlid;
+	acx->hlid = hlid;
 	acx->ht_capabilites = cpu_to_le32(ht_capabilites);
 
 	ret = wl1271_cmd_configure(wl, ACX_PEER_HT_CAP, acx, sizeof(*acx));

drivers/net/wireless/wl12xx/acx.h

@@ -1268,7 +1268,7 @@ int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
 int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl);
 int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
 				    struct ieee80211_sta_ht_cap *ht_cap,
-				    bool allow_ht_operation);
+				    bool allow_ht_operation, u8 hlid);
 int wl1271_acx_set_ht_information(struct wl1271 *wl,
 				   u16 ht_operation_mode);
 int wl12xx_acx_set_ba_initiator_policy(struct wl1271 *wl);

drivers/net/wireless/wl12xx/main.c

@@ -3124,6 +3124,18 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 	ret = wl1271_bss_erp_info_changed(wl, bss_conf, changed);
 	if (ret < 0)
 		goto out;
+
+	/* Handle HT information change */
+	if ((changed & BSS_CHANGED_HT) &&
+	    (bss_conf->channel_type != NL80211_CHAN_NO_HT)) {
+		ret = wl1271_acx_set_ht_information(wl,
+					bss_conf->ht_operation_mode);
+		if (ret < 0) {
+			wl1271_warning("Set ht information failed %d", ret);
+			goto out;
+		}
+	}
+
 out:
 	return;
 }
@@ -3439,12 +3451,14 @@ sta_not_found:
 		}
 	}
 
-	/* Handle new association with HT. Do this only after join. */
+	/* Handle new association with HT. Do this after join. */
 	if (sta_exists) {
 		if ((changed & BSS_CHANGED_HT) &&
 		    (bss_conf->channel_type != NL80211_CHAN_NO_HT)) {
-			ret = wl1271_acx_set_ht_capabilities(wl, &sta_ht_cap,
-							     true);
+			ret = wl1271_acx_set_ht_capabilities(wl,
+							     &sta_ht_cap,
+							     true,
+							     wl->sta_hlid);
 			if (ret < 0) {
 				wl1271_warning("Set ht cap true failed %d",
 					       ret);
@@ -3453,8 +3467,10 @@ sta_not_found:
 		}
 		/* handle new association without HT and disassociation */
 		else if (changed & BSS_CHANGED_ASSOC) {
-			ret = wl1271_acx_set_ht_capabilities(wl, &sta_ht_cap,
-							     false);
+			ret = wl1271_acx_set_ht_capabilities(wl,
+							     &sta_ht_cap,
+							     false,
+							     wl->sta_hlid);
 			if (ret < 0) {
 				wl1271_warning("Set ht cap false failed %d",
 					       ret);
@@ -3463,8 +3479,8 @@ sta_not_found:
 		}
 	}
 
-	/* Handle HT information change. Only after join. */
-	if (sta_exists && (changed & BSS_CHANGED_HT) &&
+	/* Handle HT information change. Done after join. */
+	if ((changed & BSS_CHANGED_HT) &&
 	    (bss_conf->channel_type != NL80211_CHAN_NO_HT)) {
 		ret = wl1271_acx_set_ht_information(wl,
 					bss_conf->ht_operation_mode);
@@ -3703,6 +3719,10 @@ static int wl1271_op_sta_add(struct ieee80211_hw *hw,
 	if (ret < 0)
 		goto out_sleep;
 
+	ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true, hlid);
+	if (ret < 0)
+		goto out_sleep;
+
 out_sleep:
 	wl1271_ps_elp_sleep(wl);