|
@@ -293,6 +293,124 @@ static int smsc9420_ethtool_nway_reset(struct net_device *netdev)
|
|
|
return phy_start_aneg(pd->phy_dev);
|
|
|
}
|
|
|
|
|
|
+static void smsc9420_eeprom_enable_access(struct smsc9420_pdata *pd)
|
|
|
+{
|
|
|
+ unsigned int temp = smsc9420_reg_read(pd, GPIO_CFG);
|
|
|
+ temp &= ~GPIO_CFG_EEPR_EN_;
|
|
|
+ smsc9420_reg_write(pd, GPIO_CFG, temp);
|
|
|
+ msleep(1);
|
|
|
+}
|
|
|
+
|
|
|
+static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op)
|
|
|
+{
|
|
|
+ int timeout = 100;
|
|
|
+ u32 e2cmd;
|
|
|
+
|
|
|
+ smsc_dbg(HW, "op 0x%08x", op);
|
|
|
+ if (smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
|
|
|
+ smsc_warn(HW, "Busy at start");
|
|
|
+ return -EBUSY;
|
|
|
+ }
|
|
|
+
|
|
|
+ e2cmd = op | E2P_CMD_EPC_BUSY_;
|
|
|
+ smsc9420_reg_write(pd, E2P_CMD, e2cmd);
|
|
|
+
|
|
|
+ do {
|
|
|
+ msleep(1);
|
|
|
+ e2cmd = smsc9420_reg_read(pd, E2P_CMD);
|
|
|
+ } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--));
|
|
|
+
|
|
|
+ if (!timeout) {
|
|
|
+ smsc_info(HW, "TIMED OUT");
|
|
|
+ return -EAGAIN;
|
|
|
+ }
|
|
|
+
|
|
|
+ if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
|
|
|
+ smsc_info(HW, "Error occured during eeprom operation");
|
|
|
+ return -EINVAL;
|
|
|
+ }
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int smsc9420_eeprom_read_location(struct smsc9420_pdata *pd,
|
|
|
+ u8 address, u8 *data)
|
|
|
+{
|
|
|
+ u32 op = E2P_CMD_EPC_CMD_READ_ | address;
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ smsc_dbg(HW, "address 0x%x", address);
|
|
|
+ ret = smsc9420_eeprom_send_cmd(pd, op);
|
|
|
+
|
|
|
+ if (!ret)
|
|
|
+ data[address] = smsc9420_reg_read(pd, E2P_DATA);
|
|
|
+
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static int smsc9420_eeprom_write_location(struct smsc9420_pdata *pd,
|
|
|
+ u8 address, u8 data)
|
|
|
+{
|
|
|
+ u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ smsc_dbg(HW, "address 0x%x, data 0x%x", address, data);
|
|
|
+ ret = smsc9420_eeprom_send_cmd(pd, op);
|
|
|
+
|
|
|
+ if (!ret) {
|
|
|
+ op = E2P_CMD_EPC_CMD_WRITE_ | address;
|
|
|
+ smsc9420_reg_write(pd, E2P_DATA, (u32)data);
|
|
|
+ ret = smsc9420_eeprom_send_cmd(pd, op);
|
|
|
+ }
|
|
|
+
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static int smsc9420_ethtool_get_eeprom_len(struct net_device *dev)
|
|
|
+{
|
|
|
+ return SMSC9420_EEPROM_SIZE;
|
|
|
+}
|
|
|
+
|
|
|
+static int smsc9420_ethtool_get_eeprom(struct net_device *dev,
|
|
|
+ struct ethtool_eeprom *eeprom, u8 *data)
|
|
|
+{
|
|
|
+ struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
|
+ u8 eeprom_data[SMSC9420_EEPROM_SIZE];
|
|
|
+ int len, i;
|
|
|
+
|
|
|
+ smsc9420_eeprom_enable_access(pd);
|
|
|
+
|
|
|
+ len = min(eeprom->len, SMSC9420_EEPROM_SIZE);
|
|
|
+ for (i = 0; i < len; i++) {
|
|
|
+ int ret = smsc9420_eeprom_read_location(pd, i, eeprom_data);
|
|
|
+ if (ret < 0) {
|
|
|
+ eeprom->len = 0;
|
|
|
+ return ret;
|
|
|
+ }
|
|
|
+ }
|
|
|
+
|
|
|
+ memcpy(data, &eeprom_data[eeprom->offset], len);
|
|
|
+ eeprom->len = len;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int smsc9420_ethtool_set_eeprom(struct net_device *dev,
|
|
|
+ struct ethtool_eeprom *eeprom, u8 *data)
|
|
|
+{
|
|
|
+ struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ smsc9420_eeprom_enable_access(pd);
|
|
|
+ smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_);
|
|
|
+ ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data);
|
|
|
+ smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWDS_);
|
|
|
+
|
|
|
+ /* Single byte write, according to man page */
|
|
|
+ eeprom->len = 1;
|
|
|
+
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
static const struct ethtool_ops smsc9420_ethtool_ops = {
|
|
|
.get_settings = smsc9420_ethtool_get_settings,
|
|
|
.set_settings = smsc9420_ethtool_set_settings,
|
|
@@ -301,6 +419,9 @@ static const struct ethtool_ops smsc9420_ethtool_ops = {
|
|
|
.set_msglevel = smsc9420_ethtool_set_msglevel,
|
|
|
.nway_reset = smsc9420_ethtool_nway_reset,
|
|
|
.get_link = ethtool_op_get_link,
|
|
|
+ .get_eeprom_len = smsc9420_ethtool_get_eeprom_len,
|
|
|
+ .get_eeprom = smsc9420_ethtool_get_eeprom,
|
|
|
+ .set_eeprom = smsc9420_ethtool_set_eeprom,
|
|
|
};
|
|
|
|
|
|
/* Sets the device MAC address to dev_addr */
|