123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270 |
- /*
- * Driver for SST serial flashes
- *
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Copyright 2008, Network Appliance Inc.
- * Jason McMullan <mcmullan@netapp.com>
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- * Copyright (c) 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
- #include <common.h>
- #include <malloc.h>
- #include <spi_flash.h>
- #include "spi_flash_internal.h"
- #define CMD_SST_WREN 0x06 /* Write Enable */
- #define CMD_SST_WRDI 0x04 /* Write Disable */
- #define CMD_SST_RDSR 0x05 /* Read Status Register */
- #define CMD_SST_WRSR 0x01 /* Write Status Register */
- #define CMD_SST_READ 0x03 /* Read Data Bytes */
- #define CMD_SST_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */
- #define CMD_SST_BP 0x02 /* Byte Program */
- #define CMD_SST_AAI_WP 0xAD /* Auto Address Increment Word Program */
- #define CMD_SST_SE 0x20 /* Sector Erase */
- #define SST_SR_WIP (1 << 0) /* Write-in-Progress */
- #define SST_SR_WEL (1 << 1) /* Write enable */
- #define SST_SR_BP0 (1 << 2) /* Block Protection 0 */
- #define SST_SR_BP1 (1 << 3) /* Block Protection 1 */
- #define SST_SR_BP2 (1 << 4) /* Block Protection 2 */
- #define SST_SR_AAI (1 << 6) /* Addressing mode */
- #define SST_SR_BPL (1 << 7) /* BP bits lock */
- struct sst_spi_flash_params {
- u8 idcode1;
- u16 nr_sectors;
- const char *name;
- };
- struct sst_spi_flash {
- struct spi_flash flash;
- const struct sst_spi_flash_params *params;
- };
- static inline struct sst_spi_flash *to_sst_spi_flash(struct spi_flash *flash)
- {
- return container_of(flash, struct sst_spi_flash, flash);
- }
- #define SST_SECTOR_SIZE (4 * 1024)
- static const struct sst_spi_flash_params sst_spi_flash_table[] = {
- {
- .idcode1 = 0x8d,
- .nr_sectors = 128,
- .name = "SST25VF040B",
- },{
- .idcode1 = 0x8e,
- .nr_sectors = 256,
- .name = "SST25VF080B",
- },{
- .idcode1 = 0x41,
- .nr_sectors = 512,
- .name = "SST25VF016B",
- },{
- .idcode1 = 0x4a,
- .nr_sectors = 1024,
- .name = "SST25VF032B",
- },{
- .idcode1 = 0x4b,
- .nr_sectors = 2048,
- .name = "SST25VF064C",
- },{
- .idcode1 = 0x01,
- .nr_sectors = 16,
- .name = "SST25WF512",
- },{
- .idcode1 = 0x02,
- .nr_sectors = 32,
- .name = "SST25WF010",
- },{
- .idcode1 = 0x03,
- .nr_sectors = 64,
- .name = "SST25WF020",
- },{
- .idcode1 = 0x04,
- .nr_sectors = 128,
- .name = "SST25WF040",
- },
- };
- static int
- sst_enable_writing(struct spi_flash *flash)
- {
- int ret = spi_flash_cmd(flash->spi, CMD_SST_WREN, NULL, 0);
- if (ret)
- debug("SF: Enabling Write failed\n");
- return ret;
- }
- static int
- sst_disable_writing(struct spi_flash *flash)
- {
- int ret = spi_flash_cmd(flash->spi, CMD_SST_WRDI, NULL, 0);
- if (ret)
- debug("SF: Disabling Write failed\n");
- return ret;
- }
- static int
- sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
- {
- int ret;
- u8 cmd[4] = {
- CMD_SST_BP,
- offset >> 16,
- offset >> 8,
- offset,
- };
- debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
- spi_w8r8(flash->spi, CMD_SST_RDSR), buf, cmd[0], offset);
- ret = sst_enable_writing(flash);
- if (ret)
- return ret;
- ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1);
- if (ret)
- return ret;
- return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
- }
- static int
- sst_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf)
- {
- size_t actual, cmd_len;
- int ret;
- u8 cmd[4];
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
- /* If the data is not word aligned, write out leading single byte */
- actual = offset % 2;
- if (actual) {
- ret = sst_byte_write(flash, offset, buf);
- if (ret)
- goto done;
- }
- offset += actual;
- ret = sst_enable_writing(flash);
- if (ret)
- goto done;
- cmd_len = 4;
- cmd[0] = CMD_SST_AAI_WP;
- cmd[1] = offset >> 16;
- cmd[2] = offset >> 8;
- cmd[3] = offset;
- for (; actual < len - 1; actual += 2) {
- debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
- spi_w8r8(flash->spi, CMD_SST_RDSR), buf + actual, cmd[0],
- offset);
- ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len,
- buf + actual, 2);
- if (ret) {
- debug("SF: sst word program failed\n");
- break;
- }
- ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
- if (ret)
- break;
- cmd_len = 1;
- offset += 2;
- }
- if (!ret)
- ret = sst_disable_writing(flash);
- /* If there is a single trailing byte, write it out */
- if (!ret && actual != len)
- ret = sst_byte_write(flash, offset, buf + actual);
- done:
- debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
- ret ? "failure" : "success", len, offset - actual);
- spi_release_bus(flash->spi);
- return ret;
- }
- static int sst_erase(struct spi_flash *flash, u32 offset, size_t len)
- {
- return spi_flash_cmd_erase(flash, CMD_SST_SE, offset, len);
- }
- static int
- sst_unlock(struct spi_flash *flash)
- {
- int ret;
- u8 cmd, status;
- ret = sst_enable_writing(flash);
- if (ret)
- return ret;
- cmd = CMD_SST_WRSR;
- status = 0;
- ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &status, 1);
- if (ret)
- debug("SF: Unable to set status byte\n");
- debug("SF: sst: status = %x\n", spi_w8r8(flash->spi, CMD_SST_RDSR));
- return ret;
- }
- struct spi_flash *
- spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode)
- {
- const struct sst_spi_flash_params *params;
- struct sst_spi_flash *stm;
- size_t i;
- for (i = 0; i < ARRAY_SIZE(sst_spi_flash_table); ++i) {
- params = &sst_spi_flash_table[i];
- if (params->idcode1 == idcode[2])
- break;
- }
- if (i == ARRAY_SIZE(sst_spi_flash_table)) {
- debug("SF: Unsupported SST ID %02x\n", idcode[1]);
- return NULL;
- }
- stm = malloc(sizeof(*stm));
- if (!stm) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
- stm->params = params;
- stm->flash.spi = spi;
- stm->flash.name = params->name;
- stm->flash.write = sst_write;
- stm->flash.erase = sst_erase;
- stm->flash.read = spi_flash_cmd_read_fast;
- stm->flash.sector_size = SST_SECTOR_SIZE;
- stm->flash.size = stm->flash.sector_size * params->nr_sectors;
- /* Flash powers up read-only, so clear BP# bits */
- sst_unlock(&stm->flash);
- return &stm->flash;
- }
|