| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595259625972598259926002601260226032604260526062607260826092610261126122613261426152616261726182619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726482649265026512652265326542655265626572658265926602661266226632664266526662667266826692670267126722673267426752676267726782679268026812682268326842685268626872688268926902691269226932694269526962697269826992700270127022703270427052706270727082709271027112712271327142715271627172718271927202721272227232724272527262727272827292730273127322733273427352736273727382739274027412742274327442745274627472748274927502751275227532754275527562757275827592760276127622763276427652766276727682769277027712772277327742775277627772778277927802781278227832784278527862787278827892790279127922793279427952796279727982799280028012802280328042805280628072808280928102811281228132814281528162817281828192820282128222823282428252826282728282829283028312832283328342835283628372838283928402841284228432844284528462847284828492850285128522853285428552856285728582859286028612862286328642865286628672868286928702871287228732874287528762877287828792880288128822883288428852886288728882889289028912892289328942895289628972898289929002901290229032904290529062907290829092910291129122913291429152916291729182919292029212922292329242925292629272928292929302931293229332934293529362937293829392940294129422943294429452946294729482949295029512952295329542955295629572958295929602961296229632964296529662967296829692970297129722973297429752976297729782979298029812982298329842985298629872988298929902991299229932994299529962997299829993000300130023003300430053006300730083009301030113012301330143015301630173018301930203021302230233024302530263027302830293030303130323033303430353036303730383039304030413042304330443045304630473048304930503051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087308830893090309130923093309430953096309730983099310031013102310331043105310631073108310931103111311231133114311531163117311831193120312131223123312431253126312731283129313031313132313331343135313631373138313931403141314231433144314531463147314831493150315131523153315431553156315731583159316031613162316331643165316631673168316931703171317231733174317531763177317831793180318131823183318431853186318731883189319031913192319331943195319631973198319932003201320232033204320532063207320832093210321132123213321432153216321732183219322032213222322332243225322632273228322932303231323232333234323532363237323832393240324132423243324432453246324732483249325032513252325332543255325632573258325932603261326232633264326532663267326832693270327132723273327432753276327732783279328032813282328332843285328632873288328932903291329232933294329532963297329832993300330133023303330433053306330733083309331033113312331333143315331633173318331933203321332233233324332533263327332833293330333133323333333433353336333733383339334033413342334333443345334633473348334933503351335233533354335533563357335833593360336133623363336433653366336733683369337033713372337333743375337633773378337933803381338233833384338533863387338833893390339133923393339433953396339733983399340034013402340334043405340634073408340934103411341234133414341534163417341834193420342134223423342434253426342734283429343034313432343334343435343634373438343934403441344234433444344534463447344834493450345134523453345434553456345734583459346034613462346334643465346634673468346934703471347234733474347534763477347834793480348134823483348434853486348734883489349034913492349334943495349634973498349935003501350235033504350535063507350835093510351135123513351435153516351735183519352035213522352335243525352635273528352935303531353235333534353535363537353835393540354135423543354435453546354735483549355035513552355335543555355635573558355935603561356235633564356535663567356835693570357135723573357435753576357735783579358035813582358335843585358635873588358935903591359235933594359535963597359835993600360136023603360436053606360736083609361036113612361336143615361636173618361936203621362236233624362536263627362836293630363136323633363436353636363736383639364036413642364336443645364636473648364936503651365236533654365536563657365836593660366136623663366436653666366736683669367036713672367336743675367636773678367936803681368236833684368536863687368836893690369136923693369436953696369736983699370037013702370337043705370637073708370937103711371237133714371537163717371837193720372137223723372437253726372737283729373037313732373337343735373637373738373937403741374237433744374537463747374837493750375137523753375437553756375737583759376037613762376337643765376637673768376937703771377237733774377537763777377837793780378137823783378437853786378737883789379037913792379337943795379637973798379938003801380238033804380538063807380838093810381138123813381438153816381738183819382038213822382338243825382638273828382938303831383238333834383538363837383838393840384138423843384438453846384738483849385038513852385338543855385638573858385938603861386238633864386538663867386838693870387138723873387438753876387738783879388038813882388338843885388638873888388938903891389238933894389538963897389838993900390139023903390439053906390739083909391039113912391339143915391639173918391939203921392239233924392539263927392839293930393139323933393439353936393739383939394039413942394339443945394639473948394939503951395239533954395539563957395839593960396139623963396439653966396739683969397039713972397339743975397639773978397939803981398239833984398539863987398839893990399139923993399439953996399739983999400040014002400340044005400640074008400940104011401240134014401540164017401840194020402140224023402440254026402740284029403040314032403340344035403640374038403940404041404240434044404540464047404840494050405140524053405440554056405740584059406040614062406340644065406640674068406940704071407240734074407540764077407840794080408140824083408440854086408740884089409040914092409340944095409640974098409941004101410241034104410541064107410841094110411141124113411441154116411741184119412041214122412341244125412641274128412941304131413241334134413541364137413841394140414141424143414441454146414741484149415041514152415341544155415641574158415941604161416241634164416541664167416841694170417141724173417441754176417741784179418041814182418341844185418641874188418941904191419241934194419541964197419841994200420142024203420442054206420742084209421042114212421342144215421642174218421942204221422242234224422542264227422842294230423142324233423442354236423742384239424042414242424342444245424642474248424942504251425242534254425542564257425842594260426142624263426442654266426742684269427042714272427342744275427642774278427942804281428242834284428542864287428842894290429142924293429442954296429742984299430043014302430343044305430643074308430943104311431243134314431543164317431843194320432143224323432443254326432743284329433043314332433343344335433643374338433943404341434243434344434543464347434843494350435143524353435443554356435743584359436043614362436343644365436643674368436943704371437243734374437543764377437843794380438143824383438443854386438743884389439043914392439343944395439643974398439944004401440244034404440544064407440844094410441144124413441444154416441744184419442044214422442344244425442644274428442944304431443244334434443544364437443844394440444144424443444444454446444744484449445044514452445344544455445644574458445944604461446244634464446544664467446844694470447144724473447444754476447744784479448044814482448344844485448644874488448944904491449244934494449544964497449844994500450145024503450445054506450745084509451045114512451345144515451645174518451945204521452245234524452545264527452845294530453145324533453445354536453745384539454045414542454345444545454645474548454945504551455245534554455545564557455845594560456145624563456445654566456745684569457045714572457345744575457645774578457945804581458245834584458545864587458845894590459145924593459445954596459745984599460046014602460346044605460646074608460946104611461246134614461546164617461846194620462146224623462446254626462746284629463046314632463346344635463646374638463946404641464246434644464546464647464846494650465146524653465446554656465746584659466046614662466346644665466646674668466946704671467246734674467546764677467846794680468146824683468446854686468746884689469046914692469346944695469646974698469947004701470247034704470547064707470847094710471147124713471447154716471747184719472047214722472347244725472647274728472947304731473247334734473547364737473847394740474147424743474447454746474747484749475047514752475347544755475647574758475947604761476247634764476547664767476847694770477147724773477447754776477747784779478047814782478347844785478647874788478947904791479247934794479547964797479847994800480148024803480448054806480748084809481048114812481348144815481648174818481948204821482248234824482548264827482848294830483148324833483448354836483748384839484048414842484348444845484648474848484948504851485248534854485548564857485848594860486148624863486448654866486748684869487048714872487348744875487648774878487948804881488248834884488548864887488848894890489148924893489448954896489748984899490049014902490349044905490649074908490949104911491249134914491549164917491849194920492149224923492449254926492749284929493049314932493349344935493649374938493949404941494249434944494549464947494849494950495149524953495449554956495749584959496049614962496349644965496649674968496949704971497249734974497549764977497849794980498149824983498449854986498749884989499049914992499349944995499649974998499950005001500250035004500550065007500850095010501150125013501450155016501750185019502050215022502350245025502650275028502950305031503250335034503550365037503850395040504150425043504450455046504750485049505050515052505350545055505650575058505950605061506250635064506550665067506850695070507150725073507450755076507750785079508050815082508350845085508650875088508950905091509250935094509550965097509850995100510151025103510451055106510751085109511051115112511351145115511651175118511951205121512251235124512551265127512851295130513151325133513451355136513751385139514051415142514351445145514651475148514951505151515251535154515551565157515851595160516151625163516451655166516751685169517051715172517351745175517651775178517951805181518251835184518551865187518851895190519151925193519451955196519751985199520052015202520352045205520652075208520952105211521252135214521552165217521852195220522152225223522452255226522752285229523052315232523352345235523652375238523952405241524252435244524552465247524852495250525152525253525452555256525752585259526052615262526352645265526652675268526952705271527252735274527552765277527852795280528152825283528452855286528752885289529052915292529352945295529652975298529953005301530253035304530553065307530853095310531153125313531453155316531753185319532053215322532353245325532653275328532953305331533253335334533553365337533853395340534153425343534453455346534753485349535053515352535353545355535653575358535953605361536253635364536553665367536853695370537153725373537453755376537753785379538053815382538353845385538653875388538953905391539253935394539553965397539853995400540154025403540454055406540754085409541054115412541354145415541654175418541954205421542254235424542554265427542854295430543154325433543454355436543754385439544054415442544354445445544654475448544954505451545254535454545554565457545854595460546154625463546454655466546754685469547054715472547354745475547654775478547954805481548254835484548554865487548854895490549154925493549454955496549754985499550055015502550355045505550655075508550955105511551255135514551555165517551855195520552155225523552455255526552755285529553055315532553355345535553655375538553955405541554255435544554555465547554855495550555155525553555455555556555755585559556055615562556355645565556655675568556955705571557255735574557555765577557855795580558155825583558455855586558755885589559055915592559355945595559655975598559956005601560256035604560556065607560856095610561156125613561456155616561756185619562056215622562356245625562656275628562956305631563256335634563556365637563856395640564156425643564456455646564756485649565056515652565356545655565656575658565956605661566256635664566556665667566856695670567156725673567456755676567756785679568056815682568356845685568656875688568956905691569256935694569556965697569856995700570157025703570457055706570757085709571057115712571357145715571657175718571957205721572257235724572557265727572857295730573157325733573457355736573757385739574057415742574357445745574657475748574957505751575257535754575557565757575857595760576157625763576457655766576757685769577057715772577357745775577657775778577957805781578257835784578557865787578857895790579157925793579457955796579757985799580058015802580358045805580658075808580958105811581258135814581558165817581858195820582158225823582458255826582758285829583058315832583358345835583658375838583958405841584258435844584558465847584858495850585158525853585458555856585758585859586058615862586358645865586658675868586958705871587258735874587558765877587858795880588158825883588458855886588758885889589058915892589358945895589658975898589959005901590259035904590559065907590859095910591159125913591459155916591759185919592059215922592359245925592659275928592959305931593259335934593559365937593859395940594159425943594459455946594759485949595059515952595359545955595659575958595959605961596259635964596559665967596859695970597159725973597459755976597759785979598059815982598359845985598659875988598959905991599259935994599559965997599859996000600160026003600460056006600760086009601060116012601360146015601660176018601960206021602260236024602560266027602860296030603160326033603460356036603760386039604060416042604360446045604660476048604960506051605260536054605560566057605860596060606160626063606460656066606760686069607060716072607360746075607660776078607960806081608260836084608560866087608860896090609160926093609460956096609760986099610061016102610361046105610661076108610961106111611261136114611561166117611861196120612161226123612461256126612761286129613061316132613361346135613661376138613961406141614261436144614561466147614861496150615161526153615461556156615761586159616061616162616361646165616661676168616961706171617261736174617561766177617861796180618161826183618461856186618761886189619061916192619361946195619661976198619962006201620262036204620562066207620862096210621162126213621462156216621762186219622062216222622362246225622662276228622962306231623262336234623562366237623862396240624162426243624462456246624762486249625062516252625362546255625662576258625962606261626262636264626562666267626862696270627162726273627462756276627762786279628062816282628362846285628662876288628962906291629262936294629562966297629862996300630163026303630463056306630763086309631063116312631363146315631663176318631963206321632263236324632563266327632863296330633163326333633463356336633763386339634063416342634363446345634663476348634963506351635263536354635563566357635863596360636163626363636463656366636763686369637063716372637363746375637663776378637963806381638263836384638563866387638863896390639163926393639463956396639763986399640064016402640364046405640664076408640964106411641264136414641564166417641864196420642164226423642464256426642764286429643064316432643364346435643664376438643964406441644264436444644564466447644864496450645164526453645464556456645764586459646064616462646364646465646664676468646964706471647264736474647564766477647864796480648164826483648464856486648764886489649064916492649364946495649664976498649965006501650265036504650565066507650865096510651165126513651465156516651765186519652065216522652365246525652665276528652965306531653265336534653565366537653865396540654165426543654465456546654765486549655065516552655365546555655665576558655965606561656265636564656565666567656865696570657165726573657465756576657765786579658065816582658365846585658665876588658965906591659265936594659565966597659865996600660166026603660466056606660766086609661066116612661366146615661666176618661966206621662266236624662566266627662866296630663166326633663466356636663766386639664066416642664366446645664666476648664966506651665266536654665566566657665866596660666166626663666466656666666766686669667066716672667366746675667666776678667966806681668266836684668566866687668866896690669166926693669466956696669766986699670067016702670367046705670667076708670967106711671267136714671567166717671867196720672167226723672467256726672767286729673067316732673367346735673667376738673967406741674267436744674567466747674867496750675167526753675467556756675767586759676067616762676367646765676667676768676967706771677267736774677567766777677867796780678167826783678467856786678767886789679067916792679367946795679667976798679968006801680268036804680568066807680868096810681168126813681468156816681768186819682068216822682368246825682668276828682968306831683268336834683568366837683868396840684168426843684468456846684768486849685068516852685368546855685668576858685968606861686268636864686568666867686868696870687168726873687468756876687768786879688068816882688368846885688668876888688968906891689268936894689568966897689868996900690169026903690469056906690769086909691069116912691369146915691669176918691969206921692269236924692569266927692869296930693169326933693469356936693769386939694069416942694369446945694669476948694969506951695269536954695569566957695869596960696169626963696469656966696769686969697069716972697369746975697669776978697969806981698269836984698569866987698869896990699169926993699469956996699769986999700070017002700370047005700670077008700970107011701270137014701570167017701870197020702170227023702470257026702770287029703070317032703370347035703670377038703970407041704270437044704570467047704870497050705170527053705470557056705770587059706070617062706370647065706670677068706970707071707270737074707570767077707870797080708170827083708470857086708770887089709070917092709370947095709670977098709971007101710271037104710571067107710871097110711171127113711471157116711771187119712071217122712371247125712671277128712971307131713271337134713571367137713871397140714171427143714471457146714771487149715071517152715371547155715671577158715971607161716271637164716571667167716871697170717171727173717471757176717771787179718071817182718371847185718671877188718971907191719271937194719571967197719871997200720172027203720472057206720772087209721072117212721372147215721672177218721972207221722272237224722572267227722872297230723172327233723472357236723772387239724072417242724372447245724672477248724972507251725272537254725572567257725872597260726172627263726472657266726772687269727072717272727372747275727672777278727972807281728272837284728572867287728872897290729172927293729472957296729772987299730073017302730373047305730673077308730973107311731273137314731573167317731873197320732173227323732473257326732773287329733073317332733373347335733673377338733973407341734273437344734573467347734873497350735173527353735473557356735773587359736073617362736373647365736673677368736973707371737273737374737573767377737873797380738173827383738473857386738773887389739073917392739373947395739673977398739974007401740274037404740574067407740874097410741174127413741474157416741774187419742074217422742374247425742674277428742974307431743274337434743574367437743874397440744174427443744474457446744774487449745074517452745374547455745674577458745974607461746274637464746574667467746874697470747174727473747474757476747774787479748074817482748374847485748674877488748974907491749274937494749574967497749874997500750175027503750475057506750775087509751075117512751375147515751675177518751975207521752275237524752575267527752875297530753175327533753475357536753775387539754075417542754375447545754675477548754975507551755275537554755575567557755875597560756175627563756475657566756775687569757075717572757375747575757675777578757975807581758275837584758575867587758875897590759175927593759475957596759775987599760076017602760376047605760676077608760976107611761276137614761576167617761876197620762176227623762476257626762776287629763076317632763376347635763676377638763976407641764276437644764576467647764876497650765176527653765476557656765776587659766076617662766376647665766676677668766976707671767276737674767576767677767876797680768176827683768476857686768776887689769076917692769376947695769676977698769977007701770277037704770577067707770877097710771177127713771477157716771777187719772077217722772377247725772677277728772977307731773277337734773577367737773877397740774177427743774477457746774777487749775077517752775377547755775677577758775977607761776277637764776577667767776877697770777177727773777477757776777777787779778077817782778377847785778677877788778977907791779277937794779577967797779877997800780178027803780478057806780778087809781078117812781378147815781678177818781978207821782278237824782578267827782878297830783178327833783478357836783778387839784078417842784378447845784678477848784978507851785278537854785578567857785878597860786178627863786478657866786778687869787078717872787378747875787678777878787978807881788278837884788578867887788878897890789178927893789478957896789778987899790079017902790379047905790679077908790979107911791279137914791579167917791879197920792179227923792479257926792779287929793079317932793379347935793679377938793979407941794279437944794579467947794879497950795179527953795479557956795779587959796079617962796379647965796679677968796979707971797279737974797579767977797879797980798179827983798479857986798779887989799079917992799379947995799679977998799980008001800280038004800580068007800880098010801180128013801480158016801780188019802080218022802380248025802680278028802980308031803280338034803580368037803880398040804180428043804480458046804780488049805080518052805380548055805680578058805980608061806280638064806580668067806880698070807180728073807480758076807780788079808080818082808380848085808680878088808980908091809280938094809580968097809880998100810181028103810481058106810781088109811081118112811381148115811681178118811981208121812281238124812581268127812881298130813181328133813481358136813781388139814081418142814381448145814681478148814981508151815281538154815581568157815881598160816181628163816481658166816781688169817081718172817381748175817681778178817981808181818281838184818581868187818881898190819181928193819481958196819781988199820082018202820382048205820682078208820982108211821282138214821582168217821882198220822182228223822482258226822782288229823082318232823382348235823682378238823982408241824282438244824582468247824882498250825182528253825482558256825782588259826082618262826382648265826682678268826982708271827282738274827582768277827882798280828182828283828482858286828782888289829082918292829382948295829682978298829983008301830283038304830583068307830883098310831183128313831483158316831783188319832083218322832383248325832683278328832983308331833283338334833583368337833883398340834183428343834483458346834783488349835083518352835383548355835683578358835983608361836283638364836583668367836883698370837183728373837483758376837783788379838083818382838383848385838683878388838983908391839283938394839583968397839883998400840184028403840484058406840784088409841084118412841384148415841684178418841984208421842284238424842584268427842884298430843184328433843484358436843784388439844084418442844384448445844684478448844984508451845284538454845584568457845884598460846184628463846484658466846784688469847084718472847384748475847684778478847984808481848284838484848584868487848884898490849184928493849484958496849784988499850085018502850385048505850685078508850985108511851285138514851585168517851885198520852185228523852485258526852785288529853085318532853385348535853685378538853985408541854285438544854585468547854885498550855185528553855485558556855785588559856085618562856385648565856685678568856985708571857285738574857585768577857885798580858185828583858485858586858785888589859085918592859385948595859685978598859986008601860286038604860586068607860886098610861186128613861486158616861786188619862086218622862386248625862686278628862986308631863286338634863586368637863886398640864186428643864486458646864786488649865086518652865386548655865686578658865986608661866286638664866586668667866886698670867186728673867486758676867786788679868086818682868386848685868686878688868986908691869286938694869586968697869886998700870187028703870487058706870787088709871087118712871387148715871687178718871987208721872287238724872587268727872887298730873187328733873487358736873787388739874087418742874387448745874687478748874987508751875287538754875587568757875887598760876187628763876487658766876787688769877087718772877387748775877687778778877987808781878287838784878587868787878887898790879187928793879487958796879787988799880088018802880388048805880688078808880988108811881288138814881588168817881888198820882188228823882488258826882788288829883088318832883388348835883688378838883988408841884288438844884588468847884888498850885188528853885488558856885788588859886088618862886388648865886688678868886988708871887288738874887588768877887888798880888188828883888488858886888788888889889088918892889388948895889688978898889989008901890289038904890589068907890889098910891189128913891489158916891789188919892089218922892389248925892689278928892989308931893289338934893589368937893889398940894189428943894489458946894789488949895089518952895389548955895689578958895989608961896289638964896589668967896889698970897189728973897489758976897789788979898089818982898389848985898689878988898989908991899289938994899589968997899889999000900190029003900490059006900790089009901090119012901390149015901690179018901990209021902290239024902590269027902890299030903190329033903490359036903790389039904090419042904390449045904690479048904990509051905290539054905590569057905890599060906190629063906490659066906790689069907090719072907390749075907690779078907990809081908290839084908590869087908890899090909190929093909490959096909790989099910091019102910391049105910691079108910991109111911291139114911591169117911891199120912191229123912491259126912791289129913091319132913391349135913691379138913991409141914291439144914591469147914891499150915191529153915491559156915791589159916091619162916391649165916691679168916991709171917291739174917591769177917891799180918191829183918491859186918791889189919091919192919391949195919691979198919992009201920292039204920592069207920892099210921192129213921492159216921792189219922092219222922392249225922692279228922992309231923292339234923592369237923892399240924192429243924492459246924792489249925092519252925392549255925692579258925992609261926292639264926592669267926892699270927192729273927492759276927792789279928092819282928392849285928692879288928992909291929292939294929592969297929892999300930193029303930493059306930793089309931093119312931393149315931693179318931993209321932293239324932593269327932893299330933193329333933493359336933793389339934093419342934393449345934693479348934993509351935293539354935593569357935893599360936193629363936493659366936793689369937093719372937393749375937693779378937993809381938293839384938593869387938893899390939193929393939493959396939793989399940094019402940394049405940694079408940994109411941294139414941594169417941894199420942194229423942494259426942794289429943094319432943394349435943694379438943994409441944294439444944594469447944894499450945194529453945494559456945794589459946094619462946394649465946694679468946994709471947294739474947594769477947894799480948194829483948494859486948794889489949094919492949394949495949694979498949995009501950295039504950595069507950895099510951195129513951495159516951795189519952095219522952395249525952695279528952995309531953295339534953595369537953895399540954195429543954495459546954795489549955095519552955395549555955695579558955995609561956295639564956595669567956895699570957195729573957495759576957795789579958095819582958395849585958695879588958995909591959295939594959595969597959895999600960196029603960496059606960796089609961096119612961396149615961696179618961996209621962296239624962596269627962896299630963196329633963496359636963796389639964096419642964396449645964696479648964996509651965296539654965596569657965896599660966196629663966496659666966796689669967096719672967396749675967696779678967996809681968296839684968596869687968896899690969196929693969496959696969796989699970097019702970397049705970697079708970997109711971297139714971597169717971897199720972197229723972497259726972797289729973097319732973397349735973697379738973997409741974297439744974597469747974897499750975197529753975497559756975797589759976097619762976397649765976697679768976997709771977297739774977597769777977897799780978197829783978497859786978797889789979097919792979397949795979697979798979998009801980298039804980598069807980898099810981198129813981498159816981798189819982098219822982398249825982698279828982998309831983298339834983598369837983898399840984198429843984498459846984798489849985098519852985398549855985698579858985998609861986298639864986598669867986898699870987198729873987498759876987798789879988098819882988398849885988698879888988998909891989298939894989598969897989898999900990199029903990499059906990799089909991099119912991399149915991699179918991999209921992299239924992599269927992899299930993199329933993499359936993799389939994099419942994399449945994699479948994999509951995299539954995599569957995899599960996199629963996499659966996799689969997099719972997399749975997699779978997999809981998299839984998599869987998899899990999199929993999499959996999799989999100001000110002100031000410005100061000710008100091001010011100121001310014100151001610017100181001910020100211002210023100241002510026100271002810029100301003110032100331003410035100361003710038100391004010041100421004310044100451004610047100481004910050100511005210053100541005510056100571005810059100601006110062100631006410065100661006710068100691007010071100721007310074100751007610077100781007910080100811008210083100841008510086100871008810089100901009110092100931009410095100961009710098100991010010101101021010310104101051010610107101081010910110101111011210113101141011510116101171011810119101201012110122101231012410125101261012710128101291013010131101321013310134101351013610137101381013910140101411014210143101441014510146101471014810149101501015110152101531015410155101561015710158101591016010161101621016310164101651016610167101681016910170101711017210173101741017510176101771017810179101801018110182101831018410185101861018710188101891019010191101921019310194101951019610197101981019910200102011020210203102041020510206102071020810209102101021110212102131021410215102161021710218102191022010221102221022310224102251022610227102281022910230102311023210233102341023510236102371023810239102401024110242102431024410245102461024710248102491025010251102521025310254102551025610257102581025910260102611026210263102641026510266102671026810269102701027110272102731027410275102761027710278102791028010281102821028310284102851028610287102881028910290102911029210293102941029510296102971029810299103001030110302103031030410305103061030710308103091031010311103121031310314103151031610317103181031910320103211032210323103241032510326103271032810329103301033110332103331033410335103361033710338103391034010341103421034310344103451034610347103481034910350103511035210353103541035510356103571035810359103601036110362103631036410365103661036710368103691037010371103721037310374103751037610377103781037910380103811038210383103841038510386103871038810389103901039110392103931039410395103961039710398103991040010401104021040310404104051040610407104081040910410104111041210413104141041510416104171041810419104201042110422104231042410425104261042710428104291043010431104321043310434104351043610437104381043910440104411044210443104441044510446104471044810449104501045110452104531045410455104561045710458104591046010461104621046310464104651046610467104681046910470104711047210473104741047510476104771047810479104801048110482104831048410485104861048710488104891049010491104921049310494104951049610497104981049910500105011050210503105041050510506105071050810509105101051110512105131051410515105161051710518105191052010521105221052310524105251052610527105281052910530105311053210533105341053510536105371053810539105401054110542105431054410545105461054710548105491055010551105521055310554105551055610557105581055910560105611056210563105641056510566105671056810569105701057110572105731057410575105761057710578105791058010581105821058310584105851058610587105881058910590105911059210593105941059510596105971059810599106001060110602106031060410605106061060710608106091061010611106121061310614106151061610617106181061910620106211062210623106241062510626106271062810629106301063110632106331063410635106361063710638106391064010641106421064310644106451064610647106481064910650106511065210653106541065510656106571065810659106601066110662106631066410665106661066710668106691067010671106721067310674106751067610677106781067910680106811068210683106841068510686106871068810689106901069110692106931069410695106961069710698106991070010701107021070310704107051070610707107081070910710107111071210713107141071510716107171071810719107201072110722107231072410725107261072710728107291073010731107321073310734107351073610737107381073910740107411074210743107441074510746107471074810749107501075110752107531075410755107561075710758107591076010761107621076310764107651076610767107681076910770107711077210773107741077510776107771077810779107801078110782107831078410785107861078710788107891079010791107921079310794107951079610797107981079910800108011080210803108041080510806108071080810809108101081110812108131081410815108161081710818108191082010821108221082310824108251082610827108281082910830108311083210833108341083510836108371083810839108401084110842108431084410845108461084710848108491085010851108521085310854108551085610857108581085910860108611086210863108641086510866108671086810869108701087110872108731087410875108761087710878108791088010881108821088310884108851088610887108881088910890108911089210893108941089510896108971089810899109001090110902109031090410905109061090710908109091091010911109121091310914109151091610917109181091910920109211092210923109241092510926109271092810929109301093110932109331093410935109361093710938109391094010941109421094310944109451094610947109481094910950109511095210953109541095510956109571095810959109601096110962109631096410965109661096710968109691097010971109721097310974109751097610977109781097910980109811098210983109841098510986109871098810989109901099110992109931099410995109961099710998109991100011001110021100311004110051100611007110081100911010110111101211013110141101511016110171101811019110201102111022110231102411025110261102711028110291103011031110321103311034110351103611037110381103911040110411104211043110441104511046110471104811049110501105111052110531105411055110561105711058110591106011061110621106311064110651106611067110681106911070110711107211073110741107511076110771107811079110801108111082110831108411085110861108711088110891109011091110921109311094110951109611097110981109911100111011110211103111041110511106111071110811109111101111111112111131111411115111161111711118111191112011121111221112311124111251112611127111281112911130111311113211133111341113511136111371113811139111401114111142111431114411145111461114711148111491115011151111521115311154111551115611157111581115911160111611116211163111641116511166111671116811169111701117111172111731117411175111761117711178111791118011181111821118311184111851118611187111881118911190111911119211193111941119511196111971119811199112001120111202112031120411205112061120711208112091121011211112121121311214112151121611217112181121911220112211122211223112241122511226112271122811229112301123111232112331123411235112361123711238112391124011241112421124311244112451124611247112481124911250112511125211253112541125511256112571125811259112601126111262112631126411265112661126711268112691127011271112721127311274112751127611277112781127911280112811128211283112841128511286112871128811289112901129111292112931129411295112961129711298112991130011301113021130311304113051130611307113081130911310113111131211313113141131511316113171131811319113201132111322113231132411325113261132711328113291133011331113321133311334113351133611337113381133911340113411134211343113441134511346113471134811349113501135111352113531135411355113561135711358113591136011361113621136311364113651136611367113681136911370113711137211373113741137511376113771137811379113801138111382113831138411385113861138711388113891139011391113921139311394113951139611397113981139911400114011140211403114041140511406114071140811409114101141111412114131141411415114161141711418114191142011421114221142311424114251142611427114281142911430114311143211433114341143511436114371143811439114401144111442114431144411445114461144711448114491145011451114521145311454114551145611457114581145911460114611146211463114641146511466114671146811469114701147111472114731147411475114761147711478114791148011481114821148311484114851148611487114881148911490114911149211493114941149511496114971149811499115001150111502115031150411505115061150711508115091151011511115121151311514115151151611517115181151911520115211152211523115241152511526115271152811529115301153111532115331153411535115361153711538115391154011541115421154311544115451154611547115481154911550115511155211553115541155511556115571155811559115601156111562115631156411565115661156711568115691157011571115721157311574115751157611577115781157911580115811158211583115841158511586115871158811589115901159111592115931159411595115961159711598115991160011601116021160311604116051160611607116081160911610116111161211613116141161511616116171161811619116201162111622116231162411625116261162711628116291163011631116321163311634116351163611637116381163911640116411164211643116441164511646116471164811649116501165111652116531165411655116561165711658116591166011661116621166311664116651166611667116681166911670116711167211673116741167511676116771167811679116801168111682116831168411685116861168711688116891169011691116921169311694116951169611697116981169911700117011170211703117041170511706117071170811709117101171111712117131171411715117161171711718117191172011721117221172311724117251172611727117281172911730117311173211733117341173511736117371173811739117401174111742117431174411745117461174711748117491175011751117521175311754117551175611757117581175911760117611176211763117641176511766117671176811769117701177111772117731177411775117761177711778117791178011781117821178311784117851178611787117881178911790117911179211793117941179511796117971179811799118001180111802118031180411805118061180711808118091181011811118121181311814118151181611817118181181911820118211182211823118241182511826118271182811829118301183111832118331183411835118361183711838118391184011841118421184311844118451184611847118481184911850118511185211853118541185511856118571185811859118601186111862118631186411865118661186711868118691187011871118721187311874118751187611877118781187911880118811188211883118841188511886118871188811889118901189111892118931189411895118961189711898118991190011901119021190311904119051190611907119081190911910119111191211913119141191511916119171191811919119201192111922119231192411925119261192711928119291193011931119321193311934119351193611937119381193911940119411194211943119441194511946119471194811949119501195111952119531195411955119561195711958119591196011961119621196311964119651196611967119681196911970119711197211973119741197511976119771197811979119801198111982119831198411985119861198711988119891199011991119921199311994119951199611997119981199912000120011200212003120041200512006120071200812009120101201112012120131201412015120161201712018120191202012021120221202312024120251202612027120281202912030120311203212033120341203512036120371203812039120401204112042120431204412045120461204712048120491205012051120521205312054120551205612057120581205912060120611206212063120641206512066120671206812069120701207112072120731207412075120761207712078120791208012081120821208312084120851208612087120881208912090120911209212093120941209512096120971209812099121001210112102121031210412105121061210712108121091211012111121121211312114121151211612117121181211912120121211212212123121241212512126121271212812129121301213112132121331213412135121361213712138121391214012141121421214312144121451214612147121481214912150121511215212153121541215512156121571215812159121601216112162121631216412165121661216712168121691217012171121721217312174121751217612177121781217912180121811218212183121841218512186121871218812189121901219112192121931219412195121961219712198121991220012201122021220312204122051220612207122081220912210122111221212213122141221512216122171221812219122201222112222122231222412225122261222712228122291223012231122321223312234122351223612237122381223912240122411224212243122441224512246122471224812249122501225112252122531225412255122561225712258122591226012261122621226312264122651226612267122681226912270122711227212273122741227512276122771227812279122801228112282122831228412285122861228712288122891229012291122921229312294122951229612297122981229912300123011230212303123041230512306123071230812309123101231112312123131231412315123161231712318123191232012321123221232312324123251232612327123281232912330123311233212333123341233512336123371233812339123401234112342123431234412345123461234712348123491235012351123521235312354123551235612357123581235912360123611236212363123641236512366123671236812369123701237112372123731237412375123761237712378123791238012381123821238312384123851238612387123881238912390123911239212393123941239512396123971239812399124001240112402124031240412405124061240712408124091241012411124121241312414124151241612417124181241912420124211242212423124241242512426124271242812429124301243112432124331243412435124361243712438124391244012441124421244312444124451244612447124481244912450124511245212453124541245512456124571245812459124601246112462124631246412465124661246712468124691247012471124721247312474124751247612477124781247912480124811248212483124841248512486124871248812489124901249112492124931249412495124961249712498124991250012501125021250312504125051250612507125081250912510125111251212513125141251512516125171251812519125201252112522125231252412525125261252712528125291253012531125321253312534125351253612537125381253912540125411254212543125441254512546125471254812549125501255112552125531255412555125561255712558125591256012561125621256312564125651256612567125681256912570125711257212573125741257512576125771257812579125801258112582125831258412585125861258712588125891259012591125921259312594125951259612597125981259912600126011260212603126041260512606126071260812609126101261112612126131261412615126161261712618126191262012621126221262312624126251262612627126281262912630126311263212633126341263512636126371263812639126401264112642126431264412645126461264712648126491265012651126521265312654126551265612657126581265912660126611266212663126641266512666126671266812669126701267112672126731267412675126761267712678126791268012681126821268312684126851268612687126881268912690126911269212693126941269512696126971269812699127001270112702127031270412705127061270712708127091271012711127121271312714127151271612717127181271912720127211272212723127241272512726127271272812729127301273112732127331273412735127361273712738127391274012741127421274312744127451274612747127481274912750127511275212753127541275512756127571275812759127601276112762127631276412765127661276712768127691277012771127721277312774127751277612777127781277912780127811278212783127841278512786127871278812789127901279112792127931279412795127961279712798127991280012801128021280312804128051280612807128081280912810128111281212813128141281512816128171281812819128201282112822128231282412825128261282712828128291283012831128321283312834128351283612837128381283912840128411284212843128441284512846128471284812849128501285112852128531285412855128561285712858128591286012861128621286312864128651286612867128681286912870128711287212873128741287512876128771287812879128801288112882128831288412885128861288712888128891289012891128921289312894128951289612897128981289912900129011290212903129041290512906129071290812909129101291112912129131291412915129161291712918129191292012921129221292312924129251292612927129281292912930129311293212933129341293512936129371293812939129401294112942129431294412945129461294712948129491295012951129521295312954129551295612957129581295912960129611296212963129641296512966129671296812969129701297112972129731297412975129761297712978129791298012981129821298312984129851298612987129881298912990129911299212993129941299512996129971299812999130001300113002130031300413005130061300713008130091301013011130121301313014130151301613017130181301913020130211302213023130241302513026130271302813029130301303113032130331303413035130361303713038130391304013041130421304313044130451304613047130481304913050130511305213053130541305513056130571305813059130601306113062130631306413065130661306713068130691307013071130721307313074130751307613077130781307913080130811308213083130841308513086130871308813089130901309113092130931309413095130961309713098130991310013101131021310313104131051310613107131081310913110131111311213113131141311513116131171311813119131201312113122131231312413125131261312713128131291313013131131321313313134131351313613137131381313913140131411314213143131441314513146131471314813149131501315113152131531315413155131561315713158131591316013161131621316313164131651316613167131681316913170131711317213173131741317513176131771317813179131801318113182131831318413185131861318713188131891319013191131921319313194131951319613197131981319913200132011320213203132041320513206132071320813209132101321113212132131321413215132161321713218132191322013221132221322313224132251322613227132281322913230132311323213233132341323513236132371323813239132401324113242132431324413245132461324713248132491325013251132521325313254132551325613257132581325913260132611326213263132641326513266132671326813269132701327113272132731327413275132761327713278132791328013281132821328313284132851328613287132881328913290132911329213293132941329513296132971329813299133001330113302133031330413305133061330713308133091331013311133121331313314133151331613317133181331913320133211332213323133241332513326133271332813329133301333113332133331333413335133361333713338133391334013341133421334313344133451334613347133481334913350133511335213353133541335513356133571335813359133601336113362133631336413365133661336713368133691337013371133721337313374133751337613377133781337913380133811338213383133841338513386133871338813389133901339113392133931339413395133961339713398133991340013401134021340313404134051340613407134081340913410134111341213413134141341513416134171341813419134201342113422134231342413425134261342713428134291343013431134321343313434134351343613437134381343913440134411344213443134441344513446134471344813449134501345113452134531345413455134561345713458134591346013461134621346313464134651346613467134681346913470134711347213473134741347513476134771347813479134801348113482134831348413485134861348713488134891349013491134921349313494134951349613497134981349913500135011350213503135041350513506135071350813509135101351113512135131351413515135161351713518135191352013521135221352313524135251352613527135281352913530135311353213533135341353513536135371353813539135401354113542135431354413545135461354713548135491355013551135521355313554135551355613557135581355913560135611356213563135641356513566135671356813569135701357113572135731357413575135761357713578135791358013581135821358313584135851358613587135881358913590135911359213593135941359513596135971359813599136001360113602136031360413605136061360713608136091361013611136121361313614136151361613617136181361913620136211362213623136241362513626136271362813629136301363113632136331363413635136361363713638136391364013641136421364313644136451364613647136481364913650136511365213653136541365513656136571365813659136601366113662136631366413665136661366713668136691367013671136721367313674136751367613677136781367913680136811368213683136841368513686136871368813689136901369113692136931369413695136961369713698136991370013701137021370313704137051370613707137081370913710137111371213713137141371513716137171371813719137201372113722137231372413725137261372713728137291373013731137321373313734137351373613737137381373913740137411374213743137441374513746137471374813749137501375113752137531375413755137561375713758137591376013761137621376313764137651376613767137681376913770137711377213773137741377513776137771377813779137801378113782137831378413785137861378713788137891379013791137921379313794137951379613797137981379913800138011380213803138041380513806138071380813809138101381113812138131381413815138161381713818138191382013821138221382313824138251382613827138281382913830138311383213833138341383513836138371383813839138401384113842138431384413845138461384713848138491385013851138521385313854138551385613857138581385913860138611386213863138641386513866138671386813869138701387113872138731387413875138761387713878138791388013881138821388313884138851388613887138881388913890138911389213893138941389513896138971389813899139001390113902139031390413905139061390713908139091391013911139121391313914139151391613917139181391913920139211392213923139241392513926139271392813929139301393113932139331393413935139361393713938139391394013941139421394313944139451394613947139481394913950139511395213953139541395513956139571395813959139601396113962139631396413965139661396713968139691397013971139721397313974139751397613977139781397913980139811398213983139841398513986139871398813989139901399113992139931399413995139961399713998139991400014001140021400314004140051400614007140081400914010140111401214013140141401514016140171401814019140201402114022140231402414025140261402714028140291403014031140321403314034140351403614037140381403914040140411404214043140441404514046140471404814049140501405114052140531405414055140561405714058140591406014061140621406314064140651406614067140681406914070140711407214073140741407514076140771407814079140801408114082140831408414085140861408714088140891409014091140921409314094140951409614097140981409914100141011410214103141041410514106141071410814109141101411114112141131411414115141161411714118141191412014121141221412314124141251412614127141281412914130141311413214133141341413514136141371413814139141401414114142141431414414145141461414714148141491415014151141521415314154141551415614157141581415914160141611416214163141641416514166141671416814169141701417114172141731417414175141761417714178141791418014181141821418314184141851418614187141881418914190141911419214193141941419514196141971419814199142001420114202142031420414205142061420714208142091421014211142121421314214142151421614217142181421914220142211422214223142241422514226142271422814229142301423114232142331423414235142361423714238142391424014241142421424314244142451424614247142481424914250142511425214253142541425514256142571425814259142601426114262142631426414265142661426714268142691427014271142721427314274142751427614277142781427914280142811428214283142841428514286142871428814289142901429114292142931429414295142961429714298142991430014301143021430314304143051430614307143081430914310143111431214313143141431514316143171431814319143201432114322143231432414325143261432714328143291433014331143321433314334143351433614337143381433914340143411434214343143441434514346143471434814349143501435114352143531435414355143561435714358143591436014361143621436314364143651436614367143681436914370143711437214373143741437514376143771437814379143801438114382143831438414385143861438714388143891439014391143921439314394143951439614397143981439914400144011440214403144041440514406144071440814409144101441114412144131441414415144161441714418144191442014421144221442314424144251442614427144281442914430144311443214433144341443514436144371443814439144401444114442144431444414445144461444714448144491445014451144521445314454144551445614457144581445914460144611446214463144641446514466144671446814469144701447114472144731447414475144761447714478144791448014481144821448314484144851448614487144881448914490144911449214493144941449514496144971449814499145001450114502145031450414505145061450714508145091451014511145121451314514145151451614517145181451914520145211452214523145241452514526145271452814529145301453114532145331453414535145361453714538145391454014541145421454314544145451454614547145481454914550145511455214553145541455514556145571455814559145601456114562145631456414565145661456714568145691457014571145721457314574145751457614577145781457914580145811458214583145841458514586145871458814589145901459114592145931459414595145961459714598145991460014601146021460314604146051460614607146081460914610146111461214613146141461514616146171461814619146201462114622146231462414625146261462714628146291463014631146321463314634146351463614637146381463914640146411464214643146441464514646146471464814649146501465114652146531465414655146561465714658146591466014661146621466314664146651466614667146681466914670146711467214673146741467514676146771467814679146801468114682146831468414685146861468714688146891469014691146921469314694146951469614697146981469914700147011470214703147041470514706147071470814709147101471114712147131471414715147161471714718147191472014721147221472314724147251472614727147281472914730147311473214733147341473514736147371473814739147401474114742147431474414745147461474714748147491475014751147521475314754147551475614757147581475914760147611476214763147641476514766147671476814769147701477114772147731477414775147761477714778147791478014781147821478314784147851478614787147881478914790147911479214793147941479514796147971479814799148001480114802148031480414805148061480714808148091481014811148121481314814148151481614817148181481914820148211482214823148241482514826148271482814829148301483114832148331483414835148361483714838148391484014841148421484314844148451484614847148481484914850148511485214853148541485514856148571485814859148601486114862148631486414865148661486714868148691487014871148721487314874148751487614877148781487914880148811488214883148841488514886148871488814889148901489114892148931489414895148961489714898148991490014901149021490314904149051490614907149081490914910149111491214913149141491514916149171491814919149201492114922149231492414925149261492714928149291493014931149321493314934149351493614937149381493914940149411494214943149441494514946149471494814949149501495114952149531495414955149561495714958149591496014961149621496314964149651496614967149681496914970149711497214973149741497514976149771497814979149801498114982149831498414985149861498714988149891499014991149921499314994149951499614997149981499915000150011500215003150041500515006150071500815009150101501115012150131501415015150161501715018150191502015021150221502315024150251502615027150281502915030150311503215033150341503515036150371503815039150401504115042150431504415045150461504715048150491505015051150521505315054150551505615057150581505915060150611506215063150641506515066150671506815069150701507115072150731507415075150761507715078150791508015081150821508315084150851508615087150881508915090150911509215093150941509515096150971509815099151001510115102151031510415105151061510715108151091511015111151121511315114151151511615117151181511915120151211512215123151241512515126151271512815129151301513115132151331513415135151361513715138151391514015141151421514315144151451514615147151481514915150151511515215153151541515515156151571515815159151601516115162151631516415165151661516715168151691517015171151721517315174151751517615177151781517915180151811518215183151841518515186151871518815189151901519115192151931519415195151961519715198151991520015201152021520315204152051520615207152081520915210152111521215213152141521515216152171521815219152201522115222152231522415225152261522715228152291523015231152321523315234152351523615237152381523915240152411524215243152441524515246152471524815249152501525115252152531525415255152561525715258152591526015261152621526315264152651526615267152681526915270152711527215273152741527515276152771527815279152801528115282152831528415285152861528715288152891529015291152921529315294152951529615297152981529915300153011530215303153041530515306153071530815309153101531115312153131531415315153161531715318153191532015321153221532315324153251532615327153281532915330153311533215333153341533515336153371533815339153401534115342153431534415345153461534715348153491535015351153521535315354153551535615357153581535915360153611536215363153641536515366153671536815369153701537115372153731537415375153761537715378153791538015381153821538315384153851538615387153881538915390153911539215393153941539515396153971539815399154001540115402154031540415405154061540715408154091541015411154121541315414154151541615417154181541915420154211542215423154241542515426154271542815429154301543115432154331543415435154361543715438154391544015441154421544315444154451544615447154481544915450154511545215453154541545515456154571545815459154601546115462154631546415465154661546715468154691547015471154721547315474154751547615477154781547915480154811548215483154841548515486154871548815489154901549115492154931549415495154961549715498154991550015501155021550315504155051550615507155081550915510155111551215513155141551515516155171551815519155201552115522155231552415525155261552715528155291553015531155321553315534155351553615537155381553915540155411554215543155441554515546155471554815549155501555115552155531555415555155561555715558155591556015561155621556315564155651556615567155681556915570155711557215573155741557515576155771557815579155801558115582155831558415585155861558715588155891559015591155921559315594155951559615597155981559915600156011560215603156041560515606156071560815609156101561115612156131561415615156161561715618156191562015621156221562315624156251562615627156281562915630156311563215633156341563515636156371563815639156401564115642156431564415645156461564715648156491565015651156521565315654156551565615657156581565915660156611566215663156641566515666156671566815669156701567115672156731567415675156761567715678156791568015681156821568315684156851568615687156881568915690156911569215693156941569515696156971569815699157001570115702157031570415705157061570715708157091571015711157121571315714157151571615717157181571915720157211572215723157241572515726157271572815729157301573115732157331573415735157361573715738157391574015741157421574315744157451574615747157481574915750157511575215753157541575515756157571575815759157601576115762157631576415765157661576715768157691577015771157721577315774157751577615777157781577915780157811578215783157841578515786157871578815789157901579115792157931579415795157961579715798157991580015801158021580315804158051580615807158081580915810158111581215813158141581515816158171581815819158201582115822158231582415825158261582715828158291583015831158321583315834158351583615837158381583915840158411584215843158441584515846158471584815849158501585115852158531585415855158561585715858158591586015861158621586315864158651586615867158681586915870158711587215873158741587515876158771587815879158801588115882158831588415885158861588715888158891589015891158921589315894158951589615897158981589915900159011590215903159041590515906159071590815909159101591115912159131591415915159161591715918159191592015921159221592315924159251592615927159281592915930159311593215933159341593515936159371593815939159401594115942159431594415945159461594715948159491595015951159521595315954159551595615957159581595915960159611596215963159641596515966159671596815969159701597115972159731597415975159761597715978159791598015981159821598315984159851598615987159881598915990159911599215993159941599515996159971599815999160001600116002160031600416005160061600716008160091601016011160121601316014160151601616017160181601916020160211602216023160241602516026160271602816029160301603116032160331603416035160361603716038160391604016041160421604316044160451604616047160481604916050160511605216053160541605516056160571605816059160601606116062160631606416065160661606716068160691607016071160721607316074160751607616077160781607916080160811608216083160841608516086160871608816089160901609116092160931609416095160961609716098160991610016101161021610316104161051610616107161081610916110161111611216113161141611516116161171611816119161201612116122161231612416125161261612716128161291613016131161321613316134161351613616137161381613916140161411614216143161441614516146161471614816149161501615116152161531615416155161561615716158161591616016161161621616316164161651616616167161681616916170161711617216173161741617516176161771617816179161801618116182161831618416185161861618716188161891619016191161921619316194161951619616197161981619916200162011620216203162041620516206162071620816209162101621116212162131621416215162161621716218162191622016221162221622316224162251622616227162281622916230162311623216233162341623516236162371623816239162401624116242162431624416245162461624716248162491625016251162521625316254162551625616257162581625916260162611626216263162641626516266162671626816269162701627116272162731627416275162761627716278162791628016281162821628316284162851628616287162881628916290162911629216293162941629516296162971629816299163001630116302163031630416305163061630716308163091631016311163121631316314163151631616317163181631916320163211632216323163241632516326163271632816329163301633116332163331633416335163361633716338163391634016341163421634316344163451634616347163481634916350163511635216353163541635516356163571635816359163601636116362163631636416365163661636716368163691637016371163721637316374163751637616377163781637916380163811638216383163841638516386163871638816389163901639116392163931639416395163961639716398163991640016401164021640316404164051640616407164081640916410164111641216413164141641516416164171641816419164201642116422164231642416425164261642716428164291643016431164321643316434164351643616437164381643916440164411644216443164441644516446164471644816449164501645116452164531645416455164561645716458164591646016461164621646316464164651646616467164681646916470164711647216473164741647516476164771647816479164801648116482164831648416485164861648716488164891649016491164921649316494164951649616497164981649916500165011650216503165041650516506165071650816509165101651116512165131651416515165161651716518165191652016521165221652316524165251652616527165281652916530165311653216533165341653516536165371653816539165401654116542165431654416545165461654716548165491655016551165521655316554165551655616557165581655916560165611656216563165641656516566165671656816569165701657116572165731657416575165761657716578165791658016581165821658316584165851658616587165881658916590165911659216593165941659516596165971659816599166001660116602166031660416605166061660716608166091661016611166121661316614166151661616617166181661916620166211662216623166241662516626166271662816629166301663116632166331663416635166361663716638166391664016641166421664316644166451664616647166481664916650166511665216653166541665516656166571665816659166601666116662166631666416665166661666716668166691667016671166721667316674166751667616677166781667916680166811668216683166841668516686166871668816689166901669116692166931669416695166961669716698166991670016701167021670316704167051670616707167081670916710167111671216713167141671516716167171671816719167201672116722167231672416725167261672716728167291673016731167321673316734167351673616737167381673916740167411674216743167441674516746167471674816749167501675116752167531675416755167561675716758167591676016761167621676316764167651676616767167681676916770167711677216773167741677516776167771677816779167801678116782167831678416785167861678716788167891679016791167921679316794167951679616797167981679916800168011680216803168041680516806168071680816809168101681116812168131681416815168161681716818168191682016821168221682316824168251682616827168281682916830168311683216833168341683516836168371683816839168401684116842168431684416845168461684716848168491685016851168521685316854168551685616857168581685916860168611686216863168641686516866168671686816869168701687116872168731687416875168761687716878168791688016881168821688316884168851688616887168881688916890168911689216893168941689516896168971689816899169001690116902169031690416905169061690716908169091691016911169121691316914169151691616917169181691916920169211692216923169241692516926169271692816929169301693116932169331693416935169361693716938169391694016941169421694316944169451694616947169481694916950169511695216953169541695516956169571695816959169601696116962169631696416965169661696716968169691697016971169721697316974169751697616977169781697916980169811698216983169841698516986169871698816989169901699116992169931699416995169961699716998169991700017001170021700317004170051700617007170081700917010170111701217013170141701517016170171701817019170201702117022170231702417025170261702717028170291703017031170321703317034170351703617037170381703917040170411704217043170441704517046170471704817049170501705117052170531705417055170561705717058170591706017061170621706317064170651706617067170681706917070170711707217073170741707517076170771707817079170801708117082170831708417085170861708717088170891709017091170921709317094170951709617097170981709917100171011710217103171041710517106171071710817109171101711117112171131711417115171161711717118171191712017121171221712317124171251712617127171281712917130171311713217133171341713517136171371713817139171401714117142171431714417145171461714717148171491715017151171521715317154171551715617157171581715917160171611716217163171641716517166171671716817169171701717117172171731717417175171761717717178171791718017181171821718317184171851718617187171881718917190171911719217193171941719517196171971719817199172001720117202172031720417205172061720717208172091721017211172121721317214172151721617217172181721917220172211722217223172241722517226172271722817229172301723117232172331723417235172361723717238172391724017241172421724317244172451724617247172481724917250172511725217253172541725517256172571725817259172601726117262172631726417265172661726717268172691727017271172721727317274172751727617277172781727917280172811728217283172841728517286172871728817289172901729117292172931729417295172961729717298172991730017301173021730317304173051730617307173081730917310173111731217313173141731517316173171731817319173201732117322173231732417325173261732717328173291733017331173321733317334173351733617337173381733917340173411734217343173441734517346173471734817349173501735117352173531735417355173561735717358173591736017361173621736317364173651736617367173681736917370173711737217373173741737517376173771737817379173801738117382173831738417385173861738717388173891739017391173921739317394173951739617397173981739917400174011740217403174041740517406174071740817409174101741117412174131741417415174161741717418174191742017421174221742317424174251742617427174281742917430174311743217433174341743517436174371743817439174401744117442174431744417445174461744717448174491745017451174521745317454174551745617457174581745917460174611746217463174641746517466174671746817469174701747117472174731747417475174761747717478174791748017481174821748317484174851748617487174881748917490174911749217493174941749517496174971749817499175001750117502175031750417505175061750717508175091751017511175121751317514175151751617517175181751917520175211752217523175241752517526175271752817529175301753117532175331753417535175361753717538175391754017541175421754317544175451754617547175481754917550175511755217553175541755517556175571755817559175601756117562175631756417565175661756717568175691757017571175721757317574175751757617577175781757917580175811758217583175841758517586175871758817589175901759117592175931759417595175961759717598175991760017601176021760317604176051760617607176081760917610176111761217613176141761517616176171761817619176201762117622176231762417625176261762717628176291763017631176321763317634176351763617637176381763917640176411764217643176441764517646176471764817649176501765117652176531765417655176561765717658176591766017661176621766317664176651766617667176681766917670176711767217673176741767517676176771767817679176801768117682176831768417685176861768717688176891769017691176921769317694176951769617697176981769917700177011770217703177041770517706177071770817709177101771117712177131771417715177161771717718177191772017721177221772317724177251772617727177281772917730177311773217733177341773517736177371773817739177401774117742177431774417745177461774717748177491775017751177521775317754177551775617757177581775917760177611776217763177641776517766177671776817769177701777117772177731777417775177761777717778177791778017781177821778317784177851778617787177881778917790177911779217793177941779517796177971779817799178001780117802178031780417805178061780717808178091781017811178121781317814178151781617817178181781917820178211782217823178241782517826178271782817829178301783117832178331783417835178361783717838178391784017841178421784317844178451784617847178481784917850178511785217853178541785517856178571785817859178601786117862178631786417865178661786717868178691787017871178721787317874178751787617877178781787917880178811788217883178841788517886178871788817889178901789117892178931789417895178961789717898178991790017901179021790317904179051790617907179081790917910179111791217913179141791517916179171791817919179201792117922179231792417925179261792717928179291793017931179321793317934179351793617937179381793917940179411794217943179441794517946179471794817949179501795117952179531795417955179561795717958179591796017961179621796317964179651796617967179681796917970179711797217973179741797517976179771797817979179801798117982179831798417985179861798717988179891799017991179921799317994179951799617997179981799918000180011800218003180041800518006180071800818009180101801118012180131801418015180161801718018180191802018021180221802318024180251802618027180281802918030180311803218033180341803518036180371803818039180401804118042180431804418045180461804718048180491805018051180521805318054180551805618057180581805918060180611806218063180641806518066180671806818069180701807118072180731807418075180761807718078180791808018081180821808318084180851808618087180881808918090180911809218093180941809518096180971809818099181001810118102181031810418105181061810718108181091811018111181121811318114181151811618117181181811918120181211812218123181241812518126181271812818129181301813118132181331813418135181361813718138181391814018141181421814318144181451814618147181481814918150181511815218153181541815518156181571815818159181601816118162181631816418165181661816718168181691817018171181721817318174181751817618177181781817918180181811818218183181841818518186181871818818189181901819118192181931819418195181961819718198181991820018201182021820318204182051820618207182081820918210182111821218213182141821518216182171821818219182201822118222182231822418225182261822718228182291823018231182321823318234182351823618237182381823918240182411824218243182441824518246182471824818249182501825118252182531825418255182561825718258182591826018261182621826318264182651826618267182681826918270182711827218273182741827518276182771827818279182801828118282182831828418285182861828718288182891829018291182921829318294182951829618297182981829918300183011830218303183041830518306183071830818309183101831118312183131831418315183161831718318183191832018321183221832318324183251832618327183281832918330183311833218333183341833518336183371833818339183401834118342183431834418345183461834718348183491835018351183521835318354183551835618357183581835918360183611836218363183641836518366183671836818369183701837118372183731837418375183761837718378183791838018381183821838318384183851838618387183881838918390183911839218393183941839518396183971839818399184001840118402184031840418405184061840718408184091841018411184121841318414184151841618417184181841918420184211842218423184241842518426184271842818429184301843118432184331843418435184361843718438184391844018441184421844318444184451844618447184481844918450184511845218453184541845518456184571845818459184601846118462184631846418465184661846718468184691847018471184721847318474184751847618477184781847918480184811848218483184841848518486184871848818489184901849118492184931849418495184961849718498184991850018501185021850318504185051850618507185081850918510185111851218513185141851518516185171851818519185201852118522185231852418525185261852718528185291853018531185321853318534185351853618537185381853918540185411854218543185441854518546185471854818549185501855118552185531855418555185561855718558185591856018561185621856318564185651856618567185681856918570185711857218573185741857518576185771857818579185801858118582185831858418585185861858718588185891859018591185921859318594185951859618597185981859918600186011860218603186041860518606186071860818609186101861118612186131861418615186161861718618186191862018621186221862318624186251862618627186281862918630186311863218633186341863518636186371863818639186401864118642186431864418645186461864718648186491865018651186521865318654186551865618657186581865918660186611866218663186641866518666186671866818669186701867118672186731867418675186761867718678186791868018681186821868318684186851868618687186881868918690186911869218693186941869518696186971869818699187001870118702187031870418705187061870718708187091871018711187121871318714187151871618717187181871918720187211872218723187241872518726187271872818729187301873118732187331873418735187361873718738187391874018741187421874318744187451874618747187481874918750187511875218753187541875518756187571875818759187601876118762187631876418765187661876718768187691877018771187721877318774187751877618777187781877918780187811878218783187841878518786187871878818789187901879118792187931879418795187961879718798187991880018801188021880318804188051880618807188081880918810188111881218813188141881518816188171881818819188201882118822188231882418825188261882718828188291883018831188321883318834188351883618837188381883918840188411884218843188441884518846188471884818849188501885118852188531885418855188561885718858188591886018861188621886318864188651886618867188681886918870188711887218873188741887518876188771887818879188801888118882188831888418885188861888718888188891889018891188921889318894188951889618897188981889918900189011890218903189041890518906189071890818909189101891118912189131891418915189161891718918189191892018921189221892318924189251892618927189281892918930189311893218933189341893518936189371893818939189401894118942189431894418945189461894718948189491895018951189521895318954189551895618957189581895918960189611896218963189641896518966189671896818969189701897118972189731897418975189761897718978189791898018981189821898318984189851898618987189881898918990189911899218993189941899518996189971899818999190001900119002190031900419005190061900719008190091901019011190121901319014190151901619017190181901919020190211902219023190241902519026190271902819029190301903119032190331903419035190361903719038190391904019041190421904319044190451904619047190481904919050190511905219053190541905519056190571905819059190601906119062190631906419065190661906719068190691907019071190721907319074190751907619077190781907919080190811908219083190841908519086190871908819089190901909119092190931909419095190961909719098190991910019101191021910319104191051910619107191081910919110191111911219113191141911519116191171911819119191201912119122191231912419125191261912719128191291913019131191321913319134191351913619137191381913919140191411914219143191441914519146191471914819149191501915119152191531915419155191561915719158191591916019161191621916319164191651916619167191681916919170191711917219173191741917519176191771917819179191801918119182191831918419185191861918719188191891919019191191921919319194191951919619197191981919919200192011920219203192041920519206192071920819209192101921119212192131921419215192161921719218192191922019221192221922319224192251922619227192281922919230192311923219233192341923519236192371923819239192401924119242192431924419245192461924719248192491925019251192521925319254192551925619257192581925919260192611926219263192641926519266192671926819269192701927119272192731927419275192761927719278192791928019281192821928319284192851928619287192881928919290192911929219293192941929519296192971929819299193001930119302193031930419305193061930719308193091931019311193121931319314193151931619317193181931919320193211932219323193241932519326193271932819329193301933119332193331933419335193361933719338193391934019341193421934319344193451934619347193481934919350193511935219353193541935519356193571935819359193601936119362193631936419365193661936719368193691937019371193721937319374193751937619377193781937919380193811938219383193841938519386193871938819389193901939119392193931939419395193961939719398193991940019401194021940319404194051940619407194081940919410194111941219413194141941519416194171941819419194201942119422194231942419425194261942719428194291943019431194321943319434194351943619437194381943919440194411944219443194441944519446194471944819449194501945119452194531945419455194561945719458194591946019461194621946319464194651946619467194681946919470194711947219473194741947519476194771947819479194801948119482194831948419485194861948719488194891949019491194921949319494194951949619497194981949919500195011950219503195041950519506195071950819509195101951119512195131951419515195161951719518195191952019521195221952319524195251952619527195281952919530195311953219533195341953519536195371953819539195401954119542195431954419545195461954719548195491955019551195521955319554195551955619557195581955919560195611956219563195641956519566195671956819569195701957119572195731957419575195761957719578195791958019581195821958319584195851958619587195881958919590195911959219593195941959519596195971959819599196001960119602196031960419605196061960719608196091961019611196121961319614196151961619617196181961919620196211962219623196241962519626196271962819629196301963119632196331963419635196361963719638196391964019641196421964319644196451964619647196481964919650196511965219653196541965519656196571965819659196601966119662196631966419665196661966719668196691967019671196721967319674196751967619677196781967919680196811968219683196841968519686196871968819689196901969119692196931969419695196961969719698196991970019701197021970319704197051970619707197081970919710197111971219713197141971519716197171971819719197201972119722197231972419725197261972719728197291973019731197321973319734197351973619737197381973919740197411974219743197441974519746197471974819749197501975119752197531975419755197561975719758197591976019761197621976319764197651976619767197681976919770197711977219773197741977519776197771977819779197801978119782197831978419785197861978719788197891979019791197921979319794197951979619797197981979919800198011980219803198041980519806198071980819809198101981119812198131981419815198161981719818198191982019821198221982319824198251982619827198281982919830198311983219833198341983519836198371983819839198401984119842198431984419845198461984719848198491985019851198521985319854198551985619857198581985919860198611986219863198641986519866198671986819869198701987119872198731987419875198761987719878198791988019881198821988319884198851988619887198881988919890198911989219893198941989519896198971989819899199001990119902199031990419905199061990719908199091991019911199121991319914199151991619917199181991919920199211992219923199241992519926199271992819929199301993119932199331993419935199361993719938199391994019941199421994319944199451994619947199481994919950199511995219953199541995519956199571995819959199601996119962199631996419965199661996719968199691997019971199721997319974199751997619977199781997919980199811998219983199841998519986199871998819989199901999119992199931999419995199961999719998199992000020001200022000320004200052000620007200082000920010200112001220013200142001520016200172001820019200202002120022200232002420025200262002720028200292003020031200322003320034200352003620037200382003920040200412004220043200442004520046200472004820049200502005120052200532005420055200562005720058200592006020061200622006320064200652006620067200682006920070200712007220073200742007520076200772007820079200802008120082200832008420085200862008720088200892009020091200922009320094200952009620097200982009920100201012010220103201042010520106201072010820109201102011120112201132011420115201162011720118201192012020121201222012320124201252012620127201282012920130201312013220133201342013520136201372013820139201402014120142201432014420145201462014720148201492015020151201522015320154201552015620157201582015920160201612016220163201642016520166201672016820169201702017120172201732017420175201762017720178201792018020181201822018320184201852018620187201882018920190201912019220193201942019520196201972019820199202002020120202202032020420205202062020720208202092021020211202122021320214202152021620217202182021920220202212022220223202242022520226202272022820229202302023120232202332023420235202362023720238202392024020241202422024320244202452024620247202482024920250202512025220253202542025520256202572025820259202602026120262202632026420265202662026720268202692027020271202722027320274202752027620277202782027920280202812028220283202842028520286202872028820289202902029120292202932029420295202962029720298202992030020301203022030320304203052030620307203082030920310203112031220313203142031520316203172031820319203202032120322203232032420325203262032720328203292033020331203322033320334203352033620337203382033920340203412034220343203442034520346203472034820349203502035120352203532035420355203562035720358203592036020361203622036320364203652036620367203682036920370203712037220373203742037520376203772037820379203802038120382203832038420385203862038720388203892039020391203922039320394203952039620397203982039920400204012040220403204042040520406204072040820409204102041120412204132041420415204162041720418204192042020421204222042320424204252042620427204282042920430204312043220433204342043520436204372043820439204402044120442204432044420445204462044720448204492045020451204522045320454204552045620457204582045920460204612046220463204642046520466204672046820469204702047120472204732047420475204762047720478204792048020481204822048320484204852048620487204882048920490204912049220493204942049520496204972049820499205002050120502205032050420505205062050720508205092051020511205122051320514205152051620517205182051920520205212052220523205242052520526205272052820529205302053120532205332053420535205362053720538205392054020541205422054320544205452054620547205482054920550205512055220553205542055520556205572055820559205602056120562205632056420565205662056720568205692057020571205722057320574205752057620577205782057920580205812058220583205842058520586205872058820589205902059120592205932059420595205962059720598205992060020601206022060320604206052060620607206082060920610206112061220613206142061520616206172061820619206202062120622206232062420625206262062720628206292063020631206322063320634206352063620637206382063920640206412064220643206442064520646206472064820649206502065120652206532065420655206562065720658206592066020661206622066320664206652066620667206682066920670206712067220673206742067520676206772067820679206802068120682206832068420685206862068720688206892069020691206922069320694206952069620697206982069920700207012070220703207042070520706207072070820709207102071120712207132071420715207162071720718207192072020721207222072320724207252072620727207282072920730207312073220733207342073520736207372073820739207402074120742207432074420745207462074720748207492075020751207522075320754207552075620757207582075920760207612076220763207642076520766207672076820769207702077120772207732077420775207762077720778207792078020781207822078320784207852078620787207882078920790207912079220793207942079520796207972079820799208002080120802208032080420805208062080720808208092081020811208122081320814208152081620817208182081920820208212082220823208242082520826208272082820829208302083120832208332083420835208362083720838208392084020841208422084320844208452084620847208482084920850208512085220853208542085520856208572085820859208602086120862208632086420865208662086720868208692087020871208722087320874208752087620877208782087920880208812088220883208842088520886208872088820889208902089120892208932089420895208962089720898208992090020901209022090320904209052090620907209082090920910209112091220913209142091520916209172091820919209202092120922209232092420925209262092720928209292093020931209322093320934209352093620937209382093920940209412094220943209442094520946209472094820949209502095120952209532095420955209562095720958209592096020961209622096320964209652096620967209682096920970209712097220973209742097520976209772097820979209802098120982209832098420985209862098720988209892099020991209922099320994209952099620997209982099921000210012100221003210042100521006210072100821009210102101121012210132101421015210162101721018210192102021021210222102321024210252102621027210282102921030210312103221033210342103521036210372103821039210402104121042210432104421045210462104721048210492105021051210522105321054210552105621057210582105921060210612106221063210642106521066210672106821069210702107121072210732107421075210762107721078210792108021081210822108321084210852108621087210882108921090210912109221093210942109521096210972109821099211002110121102211032110421105211062110721108211092111021111211122111321114211152111621117211182111921120211212112221123211242112521126211272112821129211302113121132211332113421135211362113721138211392114021141211422114321144211452114621147211482114921150211512115221153211542115521156211572115821159211602116121162211632116421165211662116721168211692117021171211722117321174211752117621177211782117921180211812118221183211842118521186211872118821189211902119121192211932119421195211962119721198211992120021201212022120321204212052120621207212082120921210212112121221213212142121521216212172121821219212202122121222212232122421225212262122721228212292123021231212322123321234212352123621237212382123921240212412124221243212442124521246212472124821249212502125121252212532125421255212562125721258212592126021261212622126321264212652126621267212682126921270212712127221273212742127521276212772127821279212802128121282212832128421285212862128721288212892129021291212922129321294212952129621297212982129921300213012130221303213042130521306213072130821309213102131121312213132131421315213162131721318213192132021321213222132321324213252132621327213282132921330213312133221333213342133521336213372133821339213402134121342213432134421345213462134721348213492135021351213522135321354213552135621357213582135921360213612136221363213642136521366213672136821369213702137121372213732137421375213762137721378213792138021381213822138321384213852138621387213882138921390213912139221393213942139521396213972139821399214002140121402214032140421405214062140721408214092141021411214122141321414214152141621417214182141921420214212142221423214242142521426214272142821429214302143121432214332143421435214362143721438214392144021441214422144321444214452144621447214482144921450214512145221453214542145521456214572145821459214602146121462214632146421465214662146721468214692147021471214722147321474214752147621477214782147921480214812148221483214842148521486214872148821489214902149121492214932149421495214962149721498214992150021501215022150321504215052150621507215082150921510215112151221513215142151521516215172151821519215202152121522215232152421525215262152721528215292153021531215322153321534215352153621537215382153921540215412154221543215442154521546215472154821549215502155121552215532155421555215562155721558215592156021561215622156321564215652156621567215682156921570215712157221573215742157521576215772157821579215802158121582215832158421585215862158721588215892159021591215922159321594215952159621597215982159921600216012160221603216042160521606216072160821609216102161121612216132161421615216162161721618216192162021621216222162321624216252162621627216282162921630216312163221633216342163521636216372163821639216402164121642216432164421645216462164721648216492165021651216522165321654216552165621657216582165921660216612166221663216642166521666216672166821669216702167121672216732167421675216762167721678216792168021681216822168321684216852168621687216882168921690216912169221693216942169521696216972169821699217002170121702217032170421705217062170721708217092171021711217122171321714217152171621717217182171921720217212172221723217242172521726217272172821729217302173121732217332173421735217362173721738217392174021741217422174321744217452174621747217482174921750217512175221753217542175521756217572175821759217602176121762217632176421765217662176721768217692177021771217722177321774217752177621777217782177921780217812178221783217842178521786217872178821789217902179121792217932179421795217962179721798217992180021801218022180321804218052180621807218082180921810218112181221813218142181521816218172181821819218202182121822218232182421825218262182721828218292183021831218322183321834218352183621837218382183921840218412184221843218442184521846218472184821849218502185121852218532185421855218562185721858218592186021861218622186321864218652186621867218682186921870218712187221873218742187521876218772187821879218802188121882218832188421885218862188721888218892189021891218922189321894218952189621897218982189921900219012190221903219042190521906219072190821909219102191121912219132191421915219162191721918219192192021921219222192321924219252192621927219282192921930219312193221933219342193521936219372193821939219402194121942219432194421945219462194721948219492195021951219522195321954219552195621957219582195921960219612196221963219642196521966219672196821969219702197121972219732197421975219762197721978219792198021981219822198321984219852198621987219882198921990219912199221993219942199521996219972199821999220002200122002220032200422005220062200722008220092201022011220122201322014220152201622017220182201922020220212202222023220242202522026220272202822029220302203122032220332203422035220362203722038220392204022041220422204322044220452204622047220482204922050220512205222053220542205522056220572205822059220602206122062220632206422065220662206722068220692207022071220722207322074220752207622077220782207922080220812208222083220842208522086220872208822089220902209122092220932209422095220962209722098220992210022101221022210322104221052210622107221082210922110221112211222113221142211522116221172211822119221202212122122221232212422125221262212722128221292213022131221322213322134221352213622137221382213922140221412214222143221442214522146221472214822149221502215122152221532215422155221562215722158221592216022161221622216322164221652216622167221682216922170221712217222173221742217522176221772217822179221802218122182221832218422185221862218722188221892219022191221922219322194221952219622197221982219922200222012220222203222042220522206222072220822209222102221122212222132221422215222162221722218222192222022221222222222322224222252222622227222282222922230222312223222233222342223522236222372223822239222402224122242222432224422245222462224722248222492225022251222522225322254222552225622257222582225922260222612226222263222642226522266222672226822269222702227122272222732227422275222762227722278222792228022281222822228322284222852228622287222882228922290222912229222293222942229522296222972229822299223002230122302223032230422305223062230722308223092231022311223122231322314223152231622317223182231922320223212232222323223242232522326223272232822329223302233122332223332233422335223362233722338223392234022341223422234322344223452234622347223482234922350223512235222353223542235522356223572235822359223602236122362223632236422365223662236722368223692237022371223722237322374223752237622377223782237922380223812238222383223842238522386223872238822389223902239122392223932239422395223962239722398223992240022401224022240322404224052240622407224082240922410224112241222413224142241522416224172241822419224202242122422224232242422425224262242722428224292243022431224322243322434224352243622437224382243922440224412244222443224442244522446224472244822449224502245122452224532245422455224562245722458224592246022461224622246322464224652246622467224682246922470224712247222473224742247522476224772247822479224802248122482224832248422485224862248722488224892249022491224922249322494224952249622497224982249922500225012250222503225042250522506225072250822509225102251122512225132251422515225162251722518225192252022521225222252322524225252252622527225282252922530225312253222533225342253522536225372253822539225402254122542225432254422545225462254722548225492255022551225522255322554225552255622557225582255922560225612256222563225642256522566225672256822569225702257122572225732257422575225762257722578225792258022581225822258322584225852258622587225882258922590225912259222593225942259522596225972259822599226002260122602226032260422605226062260722608226092261022611226122261322614226152261622617226182261922620226212262222623226242262522626226272262822629226302263122632226332263422635226362263722638226392264022641226422264322644226452264622647226482264922650226512265222653226542265522656226572265822659226602266122662226632266422665226662266722668226692267022671226722267322674226752267622677226782267922680226812268222683226842268522686226872268822689226902269122692226932269422695226962269722698226992270022701227022270322704227052270622707227082270922710227112271222713227142271522716227172271822719227202272122722227232272422725227262272722728227292273022731227322273322734227352273622737227382273922740227412274222743227442274522746227472274822749227502275122752227532275422755227562275722758227592276022761227622276322764227652276622767227682276922770227712277222773227742277522776227772277822779227802278122782227832278422785227862278722788227892279022791227922279322794227952279622797227982279922800228012280222803228042280522806228072280822809228102281122812228132281422815228162281722818228192282022821228222282322824228252282622827228282282922830228312283222833228342283522836228372283822839228402284122842228432284422845228462284722848228492285022851228522285322854228552285622857228582285922860228612286222863228642286522866228672286822869228702287122872228732287422875228762287722878228792288022881228822288322884228852288622887228882288922890228912289222893228942289522896228972289822899229002290122902229032290422905229062290722908229092291022911229122291322914229152291622917229182291922920229212292222923229242292522926229272292822929229302293122932229332293422935229362293722938229392294022941229422294322944229452294622947229482294922950229512295222953229542295522956229572295822959229602296122962229632296422965229662296722968229692297022971229722297322974229752297622977229782297922980229812298222983229842298522986229872298822989229902299122992229932299422995229962299722998229992300023001230022300323004230052300623007230082300923010230112301223013230142301523016230172301823019230202302123022230232302423025230262302723028230292303023031230322303323034230352303623037230382303923040230412304223043230442304523046230472304823049230502305123052230532305423055230562305723058230592306023061230622306323064230652306623067230682306923070230712307223073230742307523076230772307823079230802308123082230832308423085230862308723088230892309023091230922309323094230952309623097230982309923100231012310223103231042310523106231072310823109231102311123112231132311423115231162311723118231192312023121231222312323124231252312623127231282312923130231312313223133231342313523136231372313823139231402314123142231432314423145231462314723148231492315023151231522315323154231552315623157231582315923160231612316223163231642316523166231672316823169231702317123172231732317423175231762317723178231792318023181231822318323184231852318623187231882318923190231912319223193231942319523196231972319823199232002320123202232032320423205232062320723208232092321023211232122321323214232152321623217232182321923220232212322223223232242322523226232272322823229232302323123232232332323423235232362323723238232392324023241232422324323244232452324623247232482324923250232512325223253232542325523256232572325823259232602326123262232632326423265232662326723268232692327023271232722327323274232752327623277232782327923280232812328223283232842328523286232872328823289232902329123292232932329423295232962329723298232992330023301233022330323304233052330623307233082330923310233112331223313233142331523316233172331823319233202332123322233232332423325233262332723328233292333023331233322333323334233352333623337233382333923340233412334223343233442334523346233472334823349233502335123352233532335423355233562335723358233592336023361233622336323364233652336623367233682336923370233712337223373233742337523376233772337823379233802338123382233832338423385233862338723388233892339023391233922339323394233952339623397233982339923400234012340223403234042340523406234072340823409234102341123412234132341423415234162341723418234192342023421234222342323424234252342623427234282342923430234312343223433234342343523436234372343823439234402344123442234432344423445234462344723448234492345023451234522345323454234552345623457234582345923460234612346223463234642346523466234672346823469234702347123472234732347423475234762347723478234792348023481234822348323484234852348623487234882348923490234912349223493234942349523496234972349823499235002350123502235032350423505235062350723508235092351023511235122351323514235152351623517235182351923520235212352223523235242352523526235272352823529235302353123532235332353423535235362353723538235392354023541235422354323544235452354623547235482354923550235512355223553235542355523556235572355823559235602356123562235632356423565235662356723568235692357023571235722357323574235752357623577235782357923580235812358223583235842358523586235872358823589235902359123592235932359423595235962359723598235992360023601236022360323604236052360623607236082360923610236112361223613236142361523616236172361823619236202362123622236232362423625236262362723628236292363023631236322363323634236352363623637236382363923640236412364223643236442364523646236472364823649236502365123652236532365423655236562365723658236592366023661236622366323664236652366623667236682366923670236712367223673236742367523676236772367823679236802368123682236832368423685236862368723688236892369023691236922369323694236952369623697236982369923700237012370223703237042370523706237072370823709237102371123712237132371423715237162371723718237192372023721237222372323724237252372623727237282372923730237312373223733237342373523736237372373823739237402374123742237432374423745237462374723748237492375023751237522375323754237552375623757237582375923760237612376223763237642376523766237672376823769237702377123772237732377423775237762377723778237792378023781237822378323784237852378623787237882378923790237912379223793237942379523796237972379823799238002380123802238032380423805238062380723808238092381023811238122381323814238152381623817238182381923820238212382223823238242382523826238272382823829238302383123832238332383423835238362383723838238392384023841238422384323844238452384623847238482384923850238512385223853238542385523856238572385823859238602386123862238632386423865238662386723868238692387023871238722387323874238752387623877238782387923880238812388223883238842388523886238872388823889238902389123892238932389423895238962389723898238992390023901239022390323904239052390623907239082390923910239112391223913239142391523916239172391823919239202392123922239232392423925239262392723928239292393023931239322393323934239352393623937239382393923940239412394223943239442394523946239472394823949239502395123952239532395423955239562395723958239592396023961239622396323964239652396623967239682396923970239712397223973239742397523976239772397823979239802398123982239832398423985239862398723988239892399023991239922399323994239952399623997239982399924000240012400224003240042400524006240072400824009240102401124012240132401424015240162401724018240192402024021240222402324024240252402624027240282402924030240312403224033240342403524036240372403824039240402404124042240432404424045240462404724048240492405024051240522405324054240552405624057240582405924060240612406224063240642406524066240672406824069240702407124072240732407424075240762407724078240792408024081240822408324084240852408624087240882408924090240912409224093240942409524096240972409824099241002410124102241032410424105241062410724108241092411024111241122411324114241152411624117241182411924120241212412224123241242412524126241272412824129241302413124132241332413424135241362413724138241392414024141241422414324144241452414624147241482414924150241512415224153241542415524156241572415824159241602416124162241632416424165241662416724168241692417024171241722417324174241752417624177241782417924180241812418224183241842418524186241872418824189241902419124192241932419424195241962419724198241992420024201242022420324204242052420624207242082420924210242112421224213242142421524216242172421824219242202422124222242232422424225242262422724228242292423024231242322423324234242352423624237242382423924240242412424224243242442424524246242472424824249242502425124252242532425424255242562425724258242592426024261242622426324264242652426624267242682426924270242712427224273242742427524276242772427824279242802428124282242832428424285242862428724288242892429024291242922429324294242952429624297242982429924300243012430224303243042430524306243072430824309243102431124312243132431424315243162431724318243192432024321243222432324324243252432624327243282432924330243312433224333243342433524336243372433824339243402434124342243432434424345243462434724348243492435024351243522435324354243552435624357243582435924360243612436224363243642436524366243672436824369243702437124372243732437424375243762437724378243792438024381243822438324384243852438624387243882438924390243912439224393243942439524396243972439824399244002440124402244032440424405244062440724408244092441024411244122441324414244152441624417244182441924420244212442224423244242442524426244272442824429244302443124432244332443424435244362443724438244392444024441244422444324444244452444624447244482444924450244512445224453244542445524456244572445824459244602446124462244632446424465244662446724468244692447024471244722447324474244752447624477244782447924480244812448224483244842448524486244872448824489244902449124492244932449424495244962449724498244992450024501245022450324504245052450624507245082450924510245112451224513245142451524516245172451824519245202452124522245232452424525245262452724528245292453024531245322453324534245352453624537245382453924540245412454224543245442454524546245472454824549245502455124552245532455424555245562455724558245592456024561245622456324564245652456624567245682456924570245712457224573245742457524576245772457824579245802458124582245832458424585245862458724588245892459024591245922459324594245952459624597245982459924600246012460224603246042460524606246072460824609246102461124612246132461424615246162461724618246192462024621246222462324624246252462624627246282462924630246312463224633246342463524636246372463824639246402464124642246432464424645246462464724648246492465024651246522465324654246552465624657246582465924660246612466224663246642466524666246672466824669246702467124672246732467424675246762467724678246792468024681246822468324684246852468624687246882468924690246912469224693246942469524696246972469824699247002470124702247032470424705247062470724708247092471024711247122471324714247152471624717247182471924720247212472224723247242472524726247272472824729247302473124732247332473424735247362473724738247392474024741247422474324744247452474624747247482474924750247512475224753247542475524756247572475824759247602476124762247632476424765247662476724768247692477024771247722477324774247752477624777247782477924780247812478224783247842478524786247872478824789247902479124792247932479424795247962479724798247992480024801248022480324804248052480624807248082480924810248112481224813248142481524816248172481824819248202482124822248232482424825248262482724828248292483024831248322483324834248352483624837248382483924840248412484224843248442484524846248472484824849248502485124852248532485424855248562485724858248592486024861248622486324864248652486624867248682486924870248712487224873248742487524876248772487824879248802488124882248832488424885248862488724888248892489024891248922489324894248952489624897248982489924900249012490224903249042490524906249072490824909249102491124912249132491424915249162491724918249192492024921249222492324924249252492624927249282492924930249312493224933249342493524936249372493824939249402494124942249432494424945249462494724948249492495024951249522495324954249552495624957249582495924960249612496224963249642496524966249672496824969249702497124972249732497424975249762497724978249792498024981249822498324984249852498624987249882498924990249912499224993249942499524996249972499824999250002500125002250032500425005250062500725008250092501025011250122501325014250152501625017250182501925020250212502225023250242502525026250272502825029250302503125032250332503425035250362503725038250392504025041250422504325044250452504625047250482504925050250512505225053250542505525056250572505825059250602506125062250632506425065250662506725068250692507025071250722507325074250752507625077250782507925080250812508225083250842508525086250872508825089250902509125092250932509425095250962509725098250992510025101251022510325104251052510625107251082510925110251112511225113251142511525116251172511825119251202512125122251232512425125251262512725128251292513025131251322513325134251352513625137251382513925140251412514225143251442514525146251472514825149251502515125152251532515425155251562515725158251592516025161251622516325164251652516625167251682516925170251712517225173251742517525176251772517825179251802518125182251832518425185251862518725188251892519025191251922519325194251952519625197251982519925200252012520225203252042520525206252072520825209252102521125212252132521425215252162521725218252192522025221252222522325224252252522625227252282522925230252312523225233252342523525236252372523825239252402524125242252432524425245252462524725248252492525025251252522525325254252552525625257252582525925260252612526225263252642526525266252672526825269252702527125272252732527425275252762527725278252792528025281252822528325284252852528625287252882528925290252912529225293252942529525296252972529825299253002530125302253032530425305253062530725308253092531025311253122531325314253152531625317253182531925320253212532225323253242532525326253272532825329253302533125332253332533425335253362533725338253392534025341253422534325344253452534625347253482534925350253512535225353253542535525356253572535825359253602536125362253632536425365253662536725368253692537025371253722537325374253752537625377253782537925380253812538225383253842538525386253872538825389253902539125392253932539425395253962539725398253992540025401254022540325404254052540625407254082540925410254112541225413254142541525416254172541825419254202542125422254232542425425254262542725428254292543025431254322543325434254352543625437254382543925440254412544225443254442544525446254472544825449254502545125452254532545425455254562545725458254592546025461254622546325464254652546625467254682546925470254712547225473254742547525476254772547825479254802548125482254832548425485254862548725488254892549025491254922549325494254952549625497254982549925500255012550225503255042550525506255072550825509255102551125512255132551425515255162551725518255192552025521255222552325524255252552625527255282552925530255312553225533255342553525536255372553825539255402554125542255432554425545255462554725548255492555025551255522555325554255552555625557255582555925560255612556225563255642556525566255672556825569255702557125572255732557425575255762557725578255792558025581255822558325584255852558625587255882558925590255912559225593255942559525596255972559825599256002560125602256032560425605256062560725608256092561025611256122561325614256152561625617256182561925620256212562225623256242562525626256272562825629256302563125632256332563425635256362563725638256392564025641256422564325644256452564625647256482564925650256512565225653256542565525656256572565825659256602566125662256632566425665256662566725668256692567025671256722567325674256752567625677256782567925680256812568225683256842568525686256872568825689256902569125692256932569425695256962569725698256992570025701257022570325704257052570625707257082570925710257112571225713257142571525716257172571825719257202572125722257232572425725257262572725728257292573025731257322573325734257352573625737257382573925740257412574225743257442574525746257472574825749257502575125752257532575425755257562575725758257592576025761257622576325764257652576625767257682576925770257712577225773257742577525776257772577825779257802578125782257832578425785257862578725788257892579025791257922579325794257952579625797257982579925800258012580225803258042580525806258072580825809258102581125812258132581425815258162581725818258192582025821258222582325824258252582625827258282582925830258312583225833258342583525836258372583825839258402584125842258432584425845258462584725848258492585025851258522585325854258552585625857258582585925860258612586225863258642586525866258672586825869258702587125872258732587425875258762587725878258792588025881258822588325884258852588625887258882588925890258912589225893258942589525896258972589825899259002590125902259032590425905259062590725908259092591025911259122591325914259152591625917259182591925920259212592225923259242592525926259272592825929259302593125932259332593425935259362593725938259392594025941259422594325944259452594625947259482594925950259512595225953259542595525956259572595825959259602596125962259632596425965259662596725968259692597025971259722597325974259752597625977259782597925980259812598225983259842598525986259872598825989259902599125992259932599425995259962599725998259992600026001260022600326004260052600626007260082600926010260112601226013260142601526016260172601826019260202602126022260232602426025260262602726028260292603026031260322603326034260352603626037260382603926040260412604226043260442604526046260472604826049260502605126052260532605426055260562605726058260592606026061260622606326064260652606626067260682606926070260712607226073260742607526076260772607826079260802608126082260832608426085260862608726088260892609026091260922609326094260952609626097260982609926100261012610226103261042610526106261072610826109261102611126112261132611426115261162611726118261192612026121261222612326124261252612626127261282612926130261312613226133261342613526136261372613826139261402614126142261432614426145261462614726148261492615026151261522615326154261552615626157261582615926160261612616226163261642616526166261672616826169261702617126172261732617426175261762617726178261792618026181261822618326184261852618626187261882618926190261912619226193261942619526196261972619826199262002620126202262032620426205262062620726208262092621026211262122621326214262152621626217262182621926220262212622226223262242622526226262272622826229262302623126232262332623426235262362623726238262392624026241262422624326244262452624626247262482624926250262512625226253262542625526256262572625826259262602626126262262632626426265262662626726268262692627026271262722627326274262752627626277262782627926280262812628226283262842628526286262872628826289262902629126292262932629426295262962629726298262992630026301263022630326304263052630626307263082630926310263112631226313263142631526316263172631826319263202632126322263232632426325263262632726328263292633026331263322633326334263352633626337263382633926340263412634226343263442634526346263472634826349263502635126352263532635426355263562635726358263592636026361263622636326364263652636626367263682636926370263712637226373263742637526376263772637826379263802638126382263832638426385263862638726388263892639026391263922639326394263952639626397263982639926400264012640226403264042640526406264072640826409264102641126412264132641426415264162641726418264192642026421264222642326424264252642626427264282642926430264312643226433264342643526436264372643826439264402644126442264432644426445264462644726448264492645026451264522645326454264552645626457264582645926460264612646226463264642646526466264672646826469264702647126472264732647426475264762647726478264792648026481264822648326484264852648626487264882648926490264912649226493264942649526496264972649826499265002650126502265032650426505265062650726508265092651026511265122651326514265152651626517265182651926520265212652226523265242652526526265272652826529265302653126532265332653426535265362653726538265392654026541265422654326544265452654626547265482654926550265512655226553265542655526556265572655826559265602656126562265632656426565265662656726568265692657026571265722657326574265752657626577265782657926580265812658226583265842658526586265872658826589265902659126592265932659426595265962659726598265992660026601266022660326604266052660626607266082660926610266112661226613266142661526616266172661826619266202662126622266232662426625266262662726628266292663026631266322663326634266352663626637266382663926640266412664226643266442664526646266472664826649266502665126652266532665426655266562665726658266592666026661266622666326664266652666626667266682666926670266712667226673266742667526676266772667826679266802668126682266832668426685266862668726688266892669026691266922669326694266952669626697266982669926700267012670226703267042670526706267072670826709267102671126712267132671426715267162671726718267192672026721267222672326724267252672626727267282672926730267312673226733267342673526736267372673826739267402674126742267432674426745267462674726748267492675026751267522675326754267552675626757267582675926760267612676226763267642676526766267672676826769267702677126772267732677426775267762677726778267792678026781267822678326784267852678626787267882678926790267912679226793267942679526796267972679826799268002680126802268032680426805268062680726808268092681026811268122681326814268152681626817268182681926820268212682226823268242682526826268272682826829268302683126832268332683426835268362683726838268392684026841268422684326844268452684626847268482684926850268512685226853268542685526856268572685826859268602686126862268632686426865268662686726868268692687026871268722687326874268752687626877268782687926880268812688226883268842688526886268872688826889268902689126892268932689426895268962689726898268992690026901269022690326904269052690626907269082690926910269112691226913269142691526916269172691826919269202692126922269232692426925269262692726928269292693026931269322693326934269352693626937269382693926940269412694226943269442694526946269472694826949269502695126952269532695426955269562695726958269592696026961269622696326964269652696626967269682696926970269712697226973269742697526976269772697826979269802698126982269832698426985269862698726988269892699026991269922699326994269952699626997269982699927000270012700227003270042700527006270072700827009270102701127012270132701427015270162701727018270192702027021270222702327024270252702627027270282702927030270312703227033270342703527036270372703827039270402704127042270432704427045270462704727048270492705027051270522705327054270552705627057270582705927060270612706227063270642706527066270672706827069270702707127072270732707427075270762707727078270792708027081270822708327084270852708627087270882708927090270912709227093270942709527096270972709827099271002710127102271032710427105271062710727108271092711027111271122711327114271152711627117271182711927120271212712227123271242712527126271272712827129271302713127132271332713427135271362713727138271392714027141271422714327144271452714627147271482714927150271512715227153271542715527156271572715827159271602716127162271632716427165271662716727168271692717027171271722717327174271752717627177271782717927180271812718227183271842718527186271872718827189271902719127192271932719427195271962719727198271992720027201272022720327204272052720627207272082720927210272112721227213272142721527216272172721827219272202722127222272232722427225272262722727228272292723027231272322723327234272352723627237272382723927240272412724227243272442724527246272472724827249272502725127252272532725427255272562725727258272592726027261272622726327264272652726627267272682726927270272712727227273272742727527276272772727827279272802728127282272832728427285272862728727288272892729027291272922729327294272952729627297272982729927300273012730227303273042730527306273072730827309273102731127312273132731427315273162731727318273192732027321273222732327324273252732627327273282732927330273312733227333273342733527336273372733827339273402734127342273432734427345273462734727348273492735027351273522735327354273552735627357273582735927360273612736227363273642736527366273672736827369273702737127372273732737427375273762737727378273792738027381273822738327384273852738627387273882738927390273912739227393273942739527396273972739827399274002740127402274032740427405274062740727408274092741027411274122741327414274152741627417274182741927420274212742227423274242742527426274272742827429274302743127432274332743427435274362743727438274392744027441274422744327444274452744627447274482744927450274512745227453274542745527456274572745827459274602746127462274632746427465274662746727468274692747027471274722747327474274752747627477274782747927480274812748227483274842748527486274872748827489274902749127492274932749427495274962749727498274992750027501275022750327504275052750627507275082750927510275112751227513275142751527516275172751827519275202752127522275232752427525275262752727528275292753027531275322753327534275352753627537275382753927540275412754227543275442754527546275472754827549275502755127552275532755427555275562755727558275592756027561275622756327564275652756627567275682756927570275712757227573275742757527576275772757827579275802758127582275832758427585275862758727588275892759027591275922759327594275952759627597275982759927600276012760227603276042760527606276072760827609276102761127612276132761427615276162761727618276192762027621276222762327624276252762627627276282762927630276312763227633276342763527636276372763827639276402764127642276432764427645276462764727648276492765027651276522765327654276552765627657276582765927660276612766227663276642766527666276672766827669276702767127672276732767427675276762767727678276792768027681276822768327684276852768627687276882768927690276912769227693276942769527696276972769827699277002770127702277032770427705277062770727708277092771027711277122771327714277152771627717277182771927720277212772227723277242772527726277272772827729277302773127732277332773427735277362773727738277392774027741277422774327744277452774627747277482774927750277512775227753277542775527756277572775827759277602776127762277632776427765277662776727768277692777027771277722777327774277752777627777277782777927780277812778227783277842778527786277872778827789277902779127792277932779427795277962779727798277992780027801278022780327804278052780627807278082780927810278112781227813278142781527816278172781827819278202782127822278232782427825278262782727828278292783027831278322783327834278352783627837278382783927840278412784227843278442784527846278472784827849278502785127852278532785427855278562785727858278592786027861278622786327864278652786627867278682786927870278712787227873278742787527876278772787827879278802788127882278832788427885278862788727888278892789027891278922789327894278952789627897278982789927900279012790227903279042790527906279072790827909279102791127912279132791427915279162791727918279192792027921279222792327924279252792627927279282792927930279312793227933279342793527936279372793827939279402794127942279432794427945279462794727948279492795027951279522795327954279552795627957279582795927960279612796227963279642796527966279672796827969279702797127972279732797427975279762797727978279792798027981279822798327984279852798627987279882798927990279912799227993279942799527996279972799827999280002800128002280032800428005280062800728008280092801028011280122801328014280152801628017280182801928020280212802228023280242802528026280272802828029280302803128032280332803428035280362803728038280392804028041280422804328044280452804628047280482804928050280512805228053280542805528056280572805828059280602806128062280632806428065280662806728068280692807028071280722807328074280752807628077280782807928080280812808228083280842808528086280872808828089280902809128092280932809428095280962809728098280992810028101281022810328104281052810628107281082810928110281112811228113281142811528116281172811828119281202812128122281232812428125281262812728128281292813028131281322813328134281352813628137281382813928140281412814228143281442814528146281472814828149281502815128152281532815428155281562815728158281592816028161281622816328164281652816628167281682816928170281712817228173281742817528176281772817828179281802818128182281832818428185281862818728188281892819028191281922819328194281952819628197281982819928200282012820228203282042820528206282072820828209282102821128212282132821428215282162821728218282192822028221282222822328224282252822628227282282822928230282312823228233282342823528236282372823828239282402824128242282432824428245282462824728248282492825028251282522825328254282552825628257282582825928260282612826228263282642826528266282672826828269282702827128272282732827428275282762827728278282792828028281282822828328284282852828628287282882828928290282912829228293282942829528296282972829828299283002830128302283032830428305283062830728308283092831028311283122831328314283152831628317283182831928320283212832228323283242832528326283272832828329283302833128332283332833428335283362833728338283392834028341283422834328344283452834628347283482834928350283512835228353283542835528356283572835828359283602836128362283632836428365283662836728368283692837028371283722837328374283752837628377283782837928380283812838228383283842838528386283872838828389283902839128392283932839428395283962839728398283992840028401284022840328404284052840628407284082840928410284112841228413284142841528416284172841828419284202842128422284232842428425284262842728428284292843028431284322843328434284352843628437284382843928440284412844228443284442844528446284472844828449284502845128452284532845428455284562845728458284592846028461284622846328464284652846628467284682846928470284712847228473284742847528476284772847828479284802848128482284832848428485284862848728488284892849028491284922849328494284952849628497284982849928500285012850228503285042850528506285072850828509285102851128512285132851428515285162851728518285192852028521285222852328524285252852628527285282852928530285312853228533285342853528536285372853828539285402854128542285432854428545285462854728548285492855028551285522855328554285552855628557285582855928560285612856228563285642856528566285672856828569285702857128572285732857428575285762857728578285792858028581285822858328584285852858628587285882858928590285912859228593285942859528596285972859828599286002860128602286032860428605286062860728608286092861028611286122861328614286152861628617286182861928620286212862228623286242862528626286272862828629286302863128632286332863428635286362863728638286392864028641286422864328644286452864628647286482864928650286512865228653286542865528656286572865828659286602866128662286632866428665286662866728668286692867028671286722867328674286752867628677286782867928680286812868228683286842868528686286872868828689286902869128692286932869428695286962869728698286992870028701287022870328704287052870628707287082870928710287112871228713287142871528716287172871828719287202872128722287232872428725287262872728728287292873028731287322873328734287352873628737287382873928740287412874228743287442874528746287472874828749287502875128752287532875428755287562875728758287592876028761287622876328764287652876628767287682876928770287712877228773287742877528776287772877828779287802878128782287832878428785287862878728788287892879028791287922879328794287952879628797287982879928800288012880228803288042880528806288072880828809288102881128812288132881428815288162881728818288192882028821288222882328824288252882628827288282882928830288312883228833288342883528836288372883828839288402884128842288432884428845288462884728848288492885028851288522885328854288552885628857288582885928860288612886228863288642886528866288672886828869288702887128872288732887428875288762887728878288792888028881288822888328884288852888628887288882888928890288912889228893288942889528896288972889828899289002890128902289032890428905289062890728908289092891028911289122891328914289152891628917289182891928920289212892228923289242892528926289272892828929289302893128932289332893428935289362893728938289392894028941289422894328944289452894628947289482894928950289512895228953289542895528956289572895828959289602896128962289632896428965289662896728968289692897028971289722897328974289752897628977289782897928980289812898228983289842898528986289872898828989289902899128992289932899428995289962899728998289992900029001290022900329004290052900629007290082900929010290112901229013290142901529016290172901829019290202902129022290232902429025290262902729028290292903029031290322903329034290352903629037290382903929040290412904229043290442904529046290472904829049290502905129052290532905429055290562905729058290592906029061290622906329064290652906629067290682906929070290712907229073290742907529076290772907829079290802908129082290832908429085290862908729088290892909029091290922909329094290952909629097290982909929100291012910229103291042910529106291072910829109291102911129112291132911429115291162911729118291192912029121291222912329124291252912629127291282912929130291312913229133291342913529136291372913829139291402914129142291432914429145291462914729148291492915029151291522915329154291552915629157291582915929160291612916229163291642916529166291672916829169291702917129172291732917429175291762917729178291792918029181291822918329184291852918629187291882918929190291912919229193291942919529196291972919829199292002920129202292032920429205292062920729208292092921029211292122921329214292152921629217292182921929220292212922229223292242922529226292272922829229292302923129232292332923429235292362923729238292392924029241292422924329244292452924629247292482924929250292512925229253292542925529256292572925829259292602926129262292632926429265292662926729268292692927029271292722927329274292752927629277292782927929280292812928229283292842928529286292872928829289292902929129292292932929429295292962929729298292992930029301293022930329304293052930629307293082930929310293112931229313293142931529316293172931829319293202932129322293232932429325293262932729328293292933029331293322933329334293352933629337293382933929340293412934229343293442934529346293472934829349293502935129352293532935429355293562935729358293592936029361293622936329364293652936629367293682936929370293712937229373293742937529376293772937829379293802938129382293832938429385293862938729388293892939029391293922939329394293952939629397293982939929400294012940229403294042940529406294072940829409294102941129412294132941429415294162941729418294192942029421294222942329424294252942629427294282942929430294312943229433294342943529436294372943829439294402944129442294432944429445294462944729448294492945029451294522945329454294552945629457294582945929460294612946229463294642946529466294672946829469294702947129472294732947429475294762947729478294792948029481294822948329484294852948629487294882948929490294912949229493294942949529496294972949829499295002950129502295032950429505295062950729508295092951029511295122951329514295152951629517295182951929520295212952229523295242952529526295272952829529295302953129532295332953429535295362953729538295392954029541295422954329544295452954629547295482954929550295512955229553295542955529556295572955829559295602956129562295632956429565295662956729568295692957029571295722957329574295752957629577295782957929580295812958229583295842958529586295872958829589295902959129592295932959429595295962959729598295992960029601296022960329604296052960629607296082960929610296112961229613296142961529616296172961829619296202962129622296232962429625296262962729628296292963029631296322963329634296352963629637296382963929640296412964229643296442964529646296472964829649296502965129652296532965429655296562965729658296592966029661296622966329664296652966629667296682966929670296712967229673296742967529676296772967829679296802968129682296832968429685296862968729688296892969029691296922969329694296952969629697296982969929700297012970229703297042970529706297072970829709297102971129712297132971429715297162971729718297192972029721297222972329724297252972629727297282972929730297312973229733297342973529736297372973829739297402974129742297432974429745297462974729748297492975029751297522975329754297552975629757297582975929760297612976229763297642976529766297672976829769297702977129772297732977429775297762977729778297792978029781297822978329784297852978629787297882978929790297912979229793297942979529796297972979829799298002980129802298032980429805298062980729808298092981029811298122981329814298152981629817298182981929820298212982229823298242982529826298272982829829298302983129832298332983429835298362983729838298392984029841298422984329844298452984629847298482984929850298512985229853298542985529856298572985829859298602986129862298632986429865298662986729868298692987029871298722987329874298752987629877298782987929880298812988229883298842988529886298872988829889298902989129892298932989429895298962989729898298992990029901299022990329904299052990629907299082990929910299112991229913299142991529916299172991829919299202992129922299232992429925299262992729928299292993029931299322993329934299352993629937299382993929940299412994229943299442994529946299472994829949299502995129952299532995429955299562995729958299592996029961299622996329964299652996629967299682996929970299712997229973299742997529976299772997829979299802998129982299832998429985299862998729988299892999029991299922999329994299952999629997299982999930000300013000230003300043000530006300073000830009300103001130012300133001430015300163001730018300193002030021300223002330024300253002630027300283002930030300313003230033300343003530036300373003830039300403004130042300433004430045300463004730048300493005030051300523005330054300553005630057300583005930060300613006230063300643006530066300673006830069300703007130072300733007430075300763007730078300793008030081300823008330084300853008630087300883008930090300913009230093300943009530096300973009830099301003010130102301033010430105301063010730108301093011030111301123011330114301153011630117301183011930120301213012230123301243012530126301273012830129301303013130132301333013430135301363013730138301393014030141301423014330144301453014630147301483014930150301513015230153301543015530156301573015830159301603016130162301633016430165301663016730168301693017030171301723017330174301753017630177301783017930180301813018230183301843018530186301873018830189301903019130192301933019430195301963019730198301993020030201302023020330204302053020630207302083020930210302113021230213302143021530216302173021830219302203022130222302233022430225302263022730228302293023030231302323023330234302353023630237302383023930240302413024230243302443024530246302473024830249302503025130252302533025430255302563025730258302593026030261302623026330264302653026630267302683026930270302713027230273302743027530276302773027830279302803028130282302833028430285302863028730288302893029030291302923029330294302953029630297302983029930300303013030230303303043030530306303073030830309303103031130312303133031430315303163031730318303193032030321303223032330324303253032630327303283032930330303313033230333303343033530336303373033830339303403034130342303433034430345303463034730348303493035030351303523035330354303553035630357303583035930360303613036230363303643036530366303673036830369303703037130372303733037430375303763037730378303793038030381303823038330384303853038630387303883038930390303913039230393303943039530396303973039830399304003040130402304033040430405304063040730408304093041030411304123041330414304153041630417304183041930420304213042230423304243042530426304273042830429304303043130432304333043430435304363043730438304393044030441304423044330444304453044630447304483044930450304513045230453304543045530456304573045830459304603046130462304633046430465304663046730468304693047030471304723047330474304753047630477304783047930480304813048230483304843048530486304873048830489304903049130492304933049430495304963049730498304993050030501305023050330504305053050630507305083050930510305113051230513305143051530516305173051830519305203052130522305233052430525305263052730528305293053030531305323053330534305353053630537305383053930540305413054230543305443054530546305473054830549305503055130552305533055430555305563055730558305593056030561305623056330564305653056630567305683056930570305713057230573305743057530576305773057830579305803058130582305833058430585305863058730588305893059030591305923059330594305953059630597305983059930600306013060230603306043060530606306073060830609306103061130612306133061430615306163061730618306193062030621306223062330624306253062630627306283062930630306313063230633306343063530636306373063830639306403064130642306433064430645306463064730648306493065030651306523065330654306553065630657306583065930660306613066230663306643066530666306673066830669306703067130672306733067430675306763067730678306793068030681306823068330684306853068630687306883068930690306913069230693306943069530696306973069830699307003070130702307033070430705307063070730708307093071030711307123071330714307153071630717307183071930720307213072230723307243072530726307273072830729307303073130732307333073430735307363073730738307393074030741307423074330744307453074630747307483074930750307513075230753307543075530756307573075830759307603076130762307633076430765307663076730768307693077030771307723077330774307753077630777307783077930780307813078230783307843078530786307873078830789307903079130792307933079430795307963079730798307993080030801308023080330804308053080630807308083080930810308113081230813308143081530816308173081830819308203082130822308233082430825308263082730828308293083030831308323083330834308353083630837308383083930840308413084230843308443084530846308473084830849308503085130852308533085430855308563085730858308593086030861308623086330864308653086630867308683086930870308713087230873308743087530876308773087830879308803088130882308833088430885308863088730888308893089030891308923089330894308953089630897308983089930900309013090230903309043090530906309073090830909309103091130912309133091430915309163091730918309193092030921309223092330924309253092630927309283092930930309313093230933309343093530936309373093830939309403094130942309433094430945309463094730948309493095030951309523095330954309553095630957309583095930960309613096230963309643096530966309673096830969309703097130972309733097430975309763097730978309793098030981309823098330984309853098630987309883098930990309913099230993309943099530996309973099830999310003100131002310033100431005310063100731008310093101031011310123101331014310153101631017310183101931020310213102231023310243102531026310273102831029310303103131032310333103431035310363103731038310393104031041310423104331044310453104631047310483104931050310513105231053310543105531056310573105831059310603106131062310633106431065310663106731068310693107031071310723107331074310753107631077310783107931080310813108231083310843108531086310873108831089310903109131092310933109431095310963109731098310993110031101311023110331104311053110631107311083110931110311113111231113311143111531116311173111831119311203112131122311233112431125311263112731128311293113031131311323113331134311353113631137311383113931140311413114231143311443114531146311473114831149311503115131152311533115431155311563115731158311593116031161311623116331164311653116631167311683116931170311713117231173311743117531176311773117831179311803118131182311833118431185311863118731188311893119031191311923119331194311953119631197311983119931200312013120231203312043120531206312073120831209312103121131212312133121431215312163121731218312193122031221312223122331224312253122631227312283122931230312313123231233312343123531236312373123831239312403124131242312433124431245312463124731248312493125031251312523125331254312553125631257312583125931260312613126231263312643126531266312673126831269312703127131272312733127431275312763127731278312793128031281312823128331284312853128631287312883128931290312913129231293312943129531296312973129831299313003130131302313033130431305313063130731308313093131031311313123131331314313153131631317313183131931320313213132231323313243132531326313273132831329313303133131332313333133431335313363133731338313393134031341313423134331344313453134631347313483134931350313513135231353313543135531356313573135831359313603136131362313633136431365313663136731368313693137031371313723137331374313753137631377313783137931380313813138231383313843138531386313873138831389313903139131392313933139431395313963139731398313993140031401314023140331404314053140631407314083140931410314113141231413314143141531416314173141831419314203142131422314233142431425314263142731428314293143031431314323143331434314353143631437314383143931440314413144231443314443144531446314473144831449314503145131452314533145431455314563145731458314593146031461314623146331464314653146631467314683146931470314713147231473314743147531476314773147831479314803148131482314833148431485314863148731488314893149031491314923149331494314953149631497314983149931500315013150231503315043150531506315073150831509315103151131512315133151431515315163151731518315193152031521315223152331524315253152631527315283152931530315313153231533315343153531536315373153831539315403154131542315433154431545315463154731548315493155031551315523155331554315553155631557315583155931560315613156231563315643156531566315673156831569315703157131572315733157431575315763157731578315793158031581315823158331584315853158631587315883158931590315913159231593315943159531596315973159831599316003160131602316033160431605316063160731608316093161031611316123161331614316153161631617316183161931620316213162231623316243162531626316273162831629316303163131632316333163431635316363163731638316393164031641316423164331644316453164631647316483164931650316513165231653316543165531656316573165831659316603166131662316633166431665316663166731668316693167031671316723167331674316753167631677316783167931680316813168231683316843168531686316873168831689316903169131692316933169431695316963169731698316993170031701317023170331704317053170631707317083170931710317113171231713317143171531716317173171831719317203172131722317233172431725317263172731728317293173031731317323173331734317353173631737317383173931740317413174231743317443174531746317473174831749317503175131752317533175431755317563175731758317593176031761317623176331764317653176631767317683176931770317713177231773317743177531776317773177831779317803178131782317833178431785317863178731788317893179031791317923179331794317953179631797317983179931800318013180231803318043180531806318073180831809318103181131812318133181431815318163181731818318193182031821318223182331824318253182631827318283182931830318313183231833318343183531836318373183831839318403184131842318433184431845318463184731848318493185031851318523185331854318553185631857318583185931860318613186231863318643186531866318673186831869318703187131872318733187431875318763187731878318793188031881318823188331884318853188631887318883188931890318913189231893318943189531896318973189831899319003190131902319033190431905319063190731908319093191031911319123191331914319153191631917319183191931920319213192231923319243192531926319273192831929319303193131932319333193431935319363193731938319393194031941319423194331944319453194631947319483194931950319513195231953319543195531956319573195831959319603196131962319633196431965319663196731968319693197031971319723197331974319753197631977319783197931980319813198231983319843198531986319873198831989319903199131992319933199431995319963199731998319993200032001320023200332004320053200632007320083200932010320113201232013320143201532016320173201832019320203202132022320233202432025320263202732028320293203032031320323203332034320353203632037320383203932040320413204232043320443204532046320473204832049320503205132052320533205432055320563205732058320593206032061320623206332064320653206632067320683206932070320713207232073320743207532076320773207832079320803208132082320833208432085320863208732088320893209032091320923209332094320953209632097320983209932100321013210232103321043210532106321073210832109321103211132112321133211432115321163211732118321193212032121321223212332124321253212632127321283212932130321313213232133321343213532136321373213832139321403214132142321433214432145321463214732148321493215032151321523215332154321553215632157321583215932160321613216232163321643216532166321673216832169321703217132172321733217432175321763217732178321793218032181321823218332184321853218632187321883218932190321913219232193321943219532196321973219832199322003220132202322033220432205322063220732208322093221032211322123221332214322153221632217322183221932220322213222232223322243222532226322273222832229322303223132232322333223432235322363223732238322393224032241322423224332244322453224632247322483224932250322513225232253322543225532256322573225832259322603226132262322633226432265322663226732268322693227032271322723227332274322753227632277322783227932280322813228232283322843228532286322873228832289322903229132292322933229432295322963229732298322993230032301323023230332304323053230632307323083230932310323113231232313323143231532316323173231832319323203232132322323233232432325323263232732328323293233032331323323233332334323353233632337323383233932340323413234232343323443234532346323473234832349323503235132352323533235432355323563235732358323593236032361323623236332364323653236632367323683236932370323713237232373323743237532376323773237832379323803238132382323833238432385323863238732388323893239032391323923239332394323953239632397323983239932400324013240232403324043240532406324073240832409324103241132412324133241432415324163241732418324193242032421324223242332424324253242632427324283242932430324313243232433324343243532436324373243832439324403244132442324433244432445324463244732448324493245032451324523245332454324553245632457324583245932460324613246232463324643246532466324673246832469324703247132472324733247432475324763247732478324793248032481324823248332484324853248632487324883248932490324913249232493324943249532496324973249832499325003250132502325033250432505325063250732508325093251032511325123251332514325153251632517325183251932520325213252232523325243252532526325273252832529325303253132532325333253432535325363253732538325393254032541325423254332544325453254632547325483254932550325513255232553325543255532556325573255832559325603256132562325633256432565325663256732568325693257032571325723257332574325753257632577325783257932580325813258232583325843258532586325873258832589325903259132592325933259432595325963259732598325993260032601326023260332604326053260632607326083260932610326113261232613326143261532616326173261832619326203262132622326233262432625326263262732628326293263032631326323263332634326353263632637326383263932640326413264232643326443264532646326473264832649326503265132652326533265432655326563265732658326593266032661326623266332664326653266632667326683266932670326713267232673326743267532676326773267832679326803268132682326833268432685326863268732688326893269032691326923269332694326953269632697326983269932700327013270232703327043270532706327073270832709327103271132712327133271432715327163271732718327193272032721327223272332724327253272632727327283272932730327313273232733327343273532736327373273832739327403274132742327433274432745327463274732748327493275032751327523275332754327553275632757327583275932760327613276232763327643276532766327673276832769327703277132772327733277432775327763277732778327793278032781327823278332784327853278632787327883278932790327913279232793327943279532796327973279832799328003280132802328033280432805328063280732808328093281032811328123281332814328153281632817328183281932820328213282232823328243282532826328273282832829328303283132832328333283432835328363283732838328393284032841328423284332844328453284632847328483284932850328513285232853328543285532856328573285832859328603286132862328633286432865328663286732868328693287032871328723287332874328753287632877328783287932880328813288232883328843288532886328873288832889328903289132892328933289432895328963289732898328993290032901329023290332904329053290632907329083290932910329113291232913329143291532916329173291832919329203292132922329233292432925329263292732928329293293032931329323293332934329353293632937329383293932940329413294232943329443294532946329473294832949329503295132952329533295432955329563295732958329593296032961329623296332964329653296632967329683296932970329713297232973329743297532976329773297832979329803298132982329833298432985329863298732988329893299032991329923299332994329953299632997329983299933000330013300233003330043300533006330073300833009330103301133012330133301433015330163301733018330193302033021330223302333024330253302633027330283302933030330313303233033330343303533036330373303833039330403304133042330433304433045330463304733048330493305033051330523305333054330553305633057330583305933060330613306233063330643306533066330673306833069330703307133072330733307433075330763307733078330793308033081330823308333084330853308633087330883308933090330913309233093330943309533096330973309833099331003310133102331033310433105331063310733108331093311033111331123311333114331153311633117331183311933120331213312233123331243312533126331273312833129331303313133132331333313433135331363313733138331393314033141331423314333144331453314633147331483314933150331513315233153331543315533156331573315833159331603316133162331633316433165331663316733168331693317033171331723317333174331753317633177331783317933180331813318233183331843318533186331873318833189331903319133192331933319433195331963319733198331993320033201332023320333204332053320633207332083320933210332113321233213332143321533216332173321833219332203322133222332233322433225332263322733228332293323033231332323323333234332353323633237332383323933240332413324233243332443324533246332473324833249332503325133252332533325433255332563325733258332593326033261332623326333264332653326633267332683326933270332713327233273332743327533276332773327833279332803328133282332833328433285332863328733288332893329033291332923329333294332953329633297332983329933300333013330233303333043330533306333073330833309333103331133312333133331433315333163331733318333193332033321333223332333324333253332633327333283332933330333313333233333333343333533336333373333833339333403334133342333433334433345333463334733348333493335033351333523335333354333553335633357333583335933360333613336233363333643336533366333673336833369333703337133372333733337433375333763337733378333793338033381333823338333384333853338633387333883338933390333913339233393333943339533396333973339833399334003340133402334033340433405334063340733408334093341033411334123341333414334153341633417334183341933420334213342233423334243342533426334273342833429334303343133432334333343433435334363343733438334393344033441334423344333444334453344633447334483344933450334513345233453334543345533456334573345833459334603346133462334633346433465334663346733468334693347033471334723347333474334753347633477334783347933480334813348233483334843348533486334873348833489334903349133492334933349433495334963349733498334993350033501335023350333504335053350633507335083350933510335113351233513335143351533516335173351833519335203352133522335233352433525335263352733528335293353033531335323353333534335353353633537335383353933540335413354233543335443354533546335473354833549335503355133552335533355433555335563355733558335593356033561335623356333564335653356633567335683356933570335713357233573335743357533576335773357833579335803358133582335833358433585335863358733588335893359033591335923359333594335953359633597335983359933600336013360233603336043360533606336073360833609336103361133612336133361433615336163361733618336193362033621336223362333624336253362633627336283362933630336313363233633336343363533636336373363833639336403364133642336433364433645336463364733648336493365033651336523365333654336553365633657336583365933660336613366233663336643366533666336673366833669336703367133672336733367433675336763367733678336793368033681336823368333684336853368633687336883368933690336913369233693336943369533696336973369833699337003370133702337033370433705337063370733708337093371033711337123371333714337153371633717337183371933720337213372233723337243372533726337273372833729337303373133732337333373433735337363373733738337393374033741337423374333744337453374633747337483374933750337513375233753337543375533756337573375833759337603376133762337633376433765337663376733768337693377033771337723377333774337753377633777337783377933780337813378233783337843378533786337873378833789337903379133792337933379433795337963379733798337993380033801338023380333804338053380633807338083380933810338113381233813338143381533816338173381833819338203382133822338233382433825338263382733828338293383033831338323383333834338353383633837338383383933840338413384233843338443384533846338473384833849338503385133852338533385433855338563385733858338593386033861338623386333864338653386633867338683386933870338713387233873338743387533876338773387833879338803388133882338833388433885338863388733888338893389033891338923389333894338953389633897338983389933900339013390233903339043390533906339073390833909339103391133912339133391433915339163391733918339193392033921339223392333924339253392633927339283392933930339313393233933339343393533936339373393833939339403394133942339433394433945339463394733948339493395033951339523395333954339553395633957339583395933960339613396233963339643396533966339673396833969339703397133972339733397433975339763397733978339793398033981339823398333984339853398633987339883398933990339913399233993339943399533996339973399833999340003400134002340033400434005340063400734008340093401034011340123401334014340153401634017340183401934020340213402234023340243402534026340273402834029340303403134032340333403434035340363403734038340393404034041340423404334044340453404634047340483404934050340513405234053340543405534056340573405834059340603406134062340633406434065340663406734068340693407034071340723407334074340753407634077340783407934080340813408234083340843408534086340873408834089340903409134092340933409434095340963409734098340993410034101341023410334104341053410634107341083410934110341113411234113341143411534116341173411834119341203412134122341233412434125341263412734128341293413034131341323413334134341353413634137341383413934140341413414234143341443414534146341473414834149341503415134152341533415434155341563415734158341593416034161341623416334164341653416634167341683416934170341713417234173341743417534176341773417834179341803418134182341833418434185341863418734188341893419034191341923419334194341953419634197341983419934200342013420234203342043420534206342073420834209342103421134212342133421434215342163421734218342193422034221342223422334224342253422634227342283422934230342313423234233342343423534236342373423834239342403424134242342433424434245342463424734248342493425034251342523425334254342553425634257342583425934260342613426234263342643426534266342673426834269342703427134272342733427434275342763427734278342793428034281342823428334284342853428634287342883428934290342913429234293342943429534296342973429834299343003430134302343033430434305343063430734308343093431034311343123431334314343153431634317343183431934320343213432234323343243432534326343273432834329343303433134332343333433434335343363433734338343393434034341343423434334344343453434634347343483434934350343513435234353343543435534356343573435834359343603436134362343633436434365343663436734368343693437034371343723437334374343753437634377343783437934380343813438234383343843438534386343873438834389343903439134392343933439434395343963439734398343993440034401344023440334404344053440634407344083440934410344113441234413344143441534416344173441834419344203442134422344233442434425344263442734428344293443034431344323443334434344353443634437344383443934440344413444234443344443444534446344473444834449344503445134452344533445434455344563445734458344593446034461344623446334464344653446634467344683446934470344713447234473344743447534476344773447834479344803448134482344833448434485344863448734488344893449034491344923449334494344953449634497344983449934500345013450234503345043450534506345073450834509345103451134512345133451434515345163451734518345193452034521345223452334524345253452634527345283452934530345313453234533345343453534536345373453834539345403454134542345433454434545345463454734548345493455034551345523455334554345553455634557345583455934560345613456234563345643456534566345673456834569345703457134572345733457434575345763457734578345793458034581345823458334584345853458634587345883458934590345913459234593345943459534596345973459834599346003460134602346033460434605346063460734608346093461034611346123461334614346153461634617346183461934620346213462234623346243462534626346273462834629346303463134632346333463434635346363463734638346393464034641346423464334644346453464634647346483464934650346513465234653346543465534656346573465834659346603466134662346633466434665346663466734668346693467034671346723467334674346753467634677346783467934680346813468234683346843468534686346873468834689346903469134692346933469434695346963469734698346993470034701347023470334704347053470634707347083470934710347113471234713347143471534716347173471834719347203472134722347233472434725347263472734728347293473034731347323473334734347353473634737347383473934740347413474234743347443474534746347473474834749347503475134752347533475434755347563475734758347593476034761347623476334764347653476634767347683476934770347713477234773347743477534776347773477834779347803478134782347833478434785347863478734788347893479034791347923479334794347953479634797347983479934800348013480234803348043480534806348073480834809348103481134812348133481434815348163481734818348193482034821348223482334824348253482634827348283482934830348313483234833348343483534836348373483834839348403484134842348433484434845348463484734848348493485034851348523485334854348553485634857348583485934860348613486234863348643486534866348673486834869348703487134872348733487434875348763487734878348793488034881348823488334884348853488634887348883488934890348913489234893348943489534896348973489834899349003490134902349033490434905349063490734908349093491034911349123491334914349153491634917349183491934920349213492234923349243492534926349273492834929349303493134932349333493434935349363493734938349393494034941349423494334944349453494634947349483494934950349513495234953349543495534956349573495834959349603496134962349633496434965349663496734968349693497034971349723497334974349753497634977349783497934980349813498234983349843498534986349873498834989349903499134992349933499434995349963499734998349993500035001350023500335004350053500635007350083500935010350113501235013350143501535016350173501835019350203502135022350233502435025350263502735028350293503035031350323503335034350353503635037350383503935040350413504235043350443504535046350473504835049350503505135052350533505435055350563505735058350593506035061350623506335064350653506635067350683506935070350713507235073350743507535076350773507835079350803508135082350833508435085350863508735088350893509035091350923509335094350953509635097350983509935100351013510235103351043510535106351073510835109351103511135112351133511435115351163511735118351193512035121351223512335124351253512635127351283512935130351313513235133351343513535136351373513835139351403514135142351433514435145351463514735148351493515035151351523515335154351553515635157351583515935160351613516235163351643516535166351673516835169351703517135172351733517435175351763517735178351793518035181351823518335184351853518635187351883518935190351913519235193351943519535196351973519835199352003520135202352033520435205352063520735208352093521035211352123521335214352153521635217352183521935220352213522235223352243522535226352273522835229352303523135232352333523435235352363523735238352393524035241352423524335244352453524635247352483524935250352513525235253352543525535256352573525835259352603526135262352633526435265352663526735268352693527035271352723527335274352753527635277352783527935280352813528235283352843528535286352873528835289352903529135292352933529435295352963529735298352993530035301353023530335304353053530635307353083530935310353113531235313353143531535316353173531835319353203532135322353233532435325353263532735328353293533035331353323533335334353353533635337353383533935340353413534235343353443534535346353473534835349353503535135352353533535435355353563535735358353593536035361353623536335364353653536635367353683536935370353713537235373353743537535376353773537835379353803538135382353833538435385353863538735388353893539035391353923539335394353953539635397353983539935400354013540235403354043540535406354073540835409354103541135412354133541435415354163541735418354193542035421354223542335424354253542635427354283542935430354313543235433354343543535436354373543835439354403544135442354433544435445354463544735448354493545035451354523545335454354553545635457354583545935460354613546235463354643546535466354673546835469354703547135472354733547435475354763547735478354793548035481354823548335484354853548635487354883548935490354913549235493354943549535496354973549835499355003550135502355033550435505355063550735508355093551035511355123551335514355153551635517355183551935520355213552235523355243552535526355273552835529355303553135532355333553435535355363553735538355393554035541355423554335544355453554635547355483554935550355513555235553355543555535556355573555835559355603556135562355633556435565355663556735568355693557035571355723557335574355753557635577355783557935580355813558235583355843558535586355873558835589355903559135592355933559435595355963559735598355993560035601356023560335604356053560635607356083560935610356113561235613356143561535616356173561835619356203562135622356233562435625356263562735628356293563035631356323563335634356353563635637356383563935640356413564235643356443564535646356473564835649356503565135652356533565435655356563565735658356593566035661356623566335664356653566635667356683566935670356713567235673356743567535676356773567835679356803568135682356833568435685356863568735688356893569035691356923569335694356953569635697356983569935700357013570235703357043570535706357073570835709357103571135712357133571435715357163571735718357193572035721357223572335724357253572635727357283572935730357313573235733357343573535736357373573835739357403574135742357433574435745357463574735748357493575035751357523575335754357553575635757357583575935760357613576235763357643576535766357673576835769357703577135772357733577435775357763577735778357793578035781357823578335784357853578635787357883578935790357913579235793357943579535796357973579835799358003580135802358033580435805358063580735808358093581035811358123581335814358153581635817358183581935820358213582235823358243582535826358273582835829358303583135832358333583435835358363583735838358393584035841358423584335844358453584635847358483584935850358513585235853358543585535856358573585835859358603586135862358633586435865358663586735868358693587035871358723587335874358753587635877358783587935880358813588235883358843588535886358873588835889358903589135892358933589435895358963589735898358993590035901359023590335904359053590635907359083590935910359113591235913359143591535916359173591835919359203592135922359233592435925359263592735928359293593035931359323593335934359353593635937359383593935940359413594235943359443594535946359473594835949359503595135952359533595435955359563595735958359593596035961359623596335964359653596635967359683596935970359713597235973359743597535976359773597835979359803598135982359833598435985359863598735988359893599035991359923599335994359953599635997359983599936000360013600236003360043600536006360073600836009360103601136012360133601436015360163601736018360193602036021360223602336024360253602636027360283602936030360313603236033360343603536036360373603836039360403604136042360433604436045360463604736048360493605036051360523605336054360553605636057360583605936060360613606236063360643606536066360673606836069360703607136072360733607436075360763607736078360793608036081360823608336084360853608636087360883608936090360913609236093360943609536096360973609836099361003610136102361033610436105361063610736108361093611036111361123611336114361153611636117361183611936120361213612236123361243612536126361273612836129361303613136132361333613436135361363613736138361393614036141361423614336144361453614636147361483614936150361513615236153361543615536156361573615836159361603616136162361633616436165361663616736168361693617036171361723617336174361753617636177361783617936180361813618236183361843618536186361873618836189361903619136192361933619436195361963619736198361993620036201362023620336204362053620636207362083620936210362113621236213362143621536216362173621836219362203622136222362233622436225362263622736228362293623036231362323623336234362353623636237362383623936240362413624236243362443624536246362473624836249362503625136252362533625436255362563625736258362593626036261362623626336264362653626636267362683626936270362713627236273362743627536276362773627836279362803628136282362833628436285362863628736288362893629036291362923629336294362953629636297362983629936300363013630236303363043630536306363073630836309363103631136312363133631436315363163631736318363193632036321363223632336324363253632636327363283632936330363313633236333363343633536336363373633836339363403634136342363433634436345363463634736348363493635036351363523635336354363553635636357363583635936360363613636236363363643636536366363673636836369363703637136372363733637436375363763637736378363793638036381363823638336384363853638636387363883638936390363913639236393363943639536396363973639836399364003640136402364033640436405364063640736408364093641036411364123641336414364153641636417364183641936420364213642236423364243642536426364273642836429364303643136432364333643436435364363643736438364393644036441364423644336444364453644636447364483644936450364513645236453364543645536456364573645836459364603646136462364633646436465364663646736468364693647036471364723647336474364753647636477364783647936480364813648236483364843648536486364873648836489364903649136492364933649436495364963649736498364993650036501365023650336504365053650636507365083650936510365113651236513365143651536516365173651836519365203652136522365233652436525365263652736528365293653036531365323653336534365353653636537365383653936540365413654236543365443654536546365473654836549365503655136552365533655436555365563655736558365593656036561365623656336564365653656636567365683656936570365713657236573365743657536576365773657836579365803658136582365833658436585365863658736588365893659036591365923659336594365953659636597365983659936600366013660236603366043660536606366073660836609366103661136612366133661436615366163661736618366193662036621366223662336624366253662636627366283662936630366313663236633366343663536636366373663836639366403664136642366433664436645366463664736648366493665036651366523665336654366553665636657366583665936660366613666236663366643666536666366673666836669366703667136672366733667436675366763667736678366793668036681366823668336684366853668636687366883668936690366913669236693366943669536696366973669836699367003670136702367033670436705367063670736708367093671036711367123671336714367153671636717367183671936720367213672236723367243672536726367273672836729367303673136732367333673436735367363673736738367393674036741367423674336744367453674636747367483674936750367513675236753367543675536756367573675836759367603676136762367633676436765367663676736768367693677036771367723677336774367753677636777367783677936780367813678236783367843678536786367873678836789367903679136792367933679436795367963679736798367993680036801368023680336804368053680636807368083680936810368113681236813368143681536816368173681836819368203682136822368233682436825368263682736828368293683036831368323683336834368353683636837368383683936840368413684236843368443684536846368473684836849368503685136852368533685436855368563685736858368593686036861368623686336864368653686636867368683686936870368713687236873368743687536876368773687836879368803688136882368833688436885368863688736888368893689036891368923689336894368953689636897368983689936900369013690236903369043690536906369073690836909369103691136912369133691436915369163691736918369193692036921369223692336924369253692636927369283692936930369313693236933369343693536936369373693836939369403694136942369433694436945369463694736948369493695036951369523695336954369553695636957369583695936960369613696236963369643696536966369673696836969369703697136972369733697436975369763697736978369793698036981369823698336984369853698636987369883698936990369913699236993369943699536996369973699836999370003700137002370033700437005370063700737008370093701037011370123701337014370153701637017370183701937020370213702237023370243702537026370273702837029370303703137032370333703437035370363703737038370393704037041370423704337044370453704637047370483704937050370513705237053370543705537056370573705837059370603706137062370633706437065370663706737068370693707037071370723707337074370753707637077370783707937080370813708237083370843708537086370873708837089370903709137092370933709437095370963709737098370993710037101371023710337104371053710637107371083710937110371113711237113371143711537116371173711837119371203712137122371233712437125371263712737128371293713037131371323713337134371353713637137371383713937140371413714237143371443714537146371473714837149371503715137152371533715437155371563715737158371593716037161371623716337164371653716637167371683716937170371713717237173371743717537176371773717837179371803718137182371833718437185371863718737188371893719037191371923719337194371953719637197371983719937200372013720237203372043720537206372073720837209372103721137212372133721437215372163721737218372193722037221372223722337224372253722637227372283722937230372313723237233372343723537236372373723837239372403724137242372433724437245372463724737248372493725037251372523725337254372553725637257372583725937260372613726237263372643726537266372673726837269372703727137272372733727437275372763727737278372793728037281372823728337284372853728637287372883728937290372913729237293372943729537296372973729837299373003730137302373033730437305373063730737308373093731037311373123731337314373153731637317373183731937320373213732237323373243732537326373273732837329373303733137332373333733437335373363733737338373393734037341373423734337344373453734637347373483734937350373513735237353373543735537356373573735837359373603736137362373633736437365373663736737368373693737037371373723737337374373753737637377373783737937380373813738237383373843738537386373873738837389373903739137392373933739437395373963739737398373993740037401374023740337404374053740637407374083740937410374113741237413374143741537416374173741837419374203742137422374233742437425374263742737428374293743037431374323743337434374353743637437374383743937440374413744237443374443744537446374473744837449374503745137452374533745437455374563745737458374593746037461374623746337464374653746637467374683746937470374713747237473374743747537476374773747837479374803748137482374833748437485374863748737488374893749037491374923749337494374953749637497374983749937500375013750237503375043750537506375073750837509375103751137512375133751437515375163751737518375193752037521375223752337524375253752637527375283752937530375313753237533375343753537536375373753837539375403754137542375433754437545375463754737548375493755037551375523755337554375553755637557375583755937560375613756237563375643756537566375673756837569375703757137572375733757437575375763757737578375793758037581375823758337584375853758637587375883758937590375913759237593375943759537596375973759837599376003760137602376033760437605376063760737608376093761037611376123761337614376153761637617376183761937620376213762237623376243762537626376273762837629376303763137632376333763437635376363763737638376393764037641376423764337644376453764637647376483764937650376513765237653376543765537656376573765837659376603766137662376633766437665376663766737668376693767037671376723767337674376753767637677376783767937680376813768237683376843768537686376873768837689376903769137692376933769437695376963769737698376993770037701377023770337704377053770637707377083770937710377113771237713377143771537716377173771837719377203772137722377233772437725377263772737728377293773037731377323773337734377353773637737377383773937740377413774237743377443774537746377473774837749377503775137752377533775437755377563775737758377593776037761377623776337764377653776637767377683776937770377713777237773377743777537776377773777837779377803778137782377833778437785377863778737788377893779037791377923779337794377953779637797377983779937800378013780237803378043780537806378073780837809378103781137812378133781437815378163781737818378193782037821378223782337824378253782637827378283782937830378313783237833378343783537836378373783837839378403784137842378433784437845378463784737848378493785037851378523785337854378553785637857378583785937860378613786237863378643786537866378673786837869378703787137872378733787437875378763787737878378793788037881378823788337884378853788637887378883788937890378913789237893378943789537896378973789837899379003790137902379033790437905379063790737908379093791037911379123791337914379153791637917379183791937920379213792237923379243792537926379273792837929379303793137932379333793437935379363793737938379393794037941379423794337944379453794637947379483794937950379513795237953379543795537956379573795837959379603796137962379633796437965379663796737968379693797037971379723797337974379753797637977379783797937980379813798237983379843798537986379873798837989379903799137992379933799437995379963799737998379993800038001380023800338004380053800638007380083800938010380113801238013380143801538016380173801838019380203802138022380233802438025380263802738028380293803038031380323803338034380353803638037380383803938040380413804238043380443804538046380473804838049380503805138052380533805438055380563805738058380593806038061380623806338064380653806638067380683806938070380713807238073380743807538076380773807838079380803808138082380833808438085380863808738088380893809038091380923809338094380953809638097380983809938100381013810238103381043810538106381073810838109381103811138112381133811438115381163811738118381193812038121381223812338124381253812638127381283812938130381313813238133381343813538136381373813838139381403814138142381433814438145381463814738148381493815038151381523815338154381553815638157381583815938160381613816238163381643816538166381673816838169381703817138172381733817438175381763817738178381793818038181381823818338184381853818638187381883818938190381913819238193381943819538196381973819838199382003820138202382033820438205382063820738208382093821038211382123821338214382153821638217382183821938220382213822238223382243822538226382273822838229382303823138232382333823438235382363823738238382393824038241382423824338244382453824638247382483824938250382513825238253382543825538256382573825838259382603826138262382633826438265382663826738268382693827038271382723827338274382753827638277382783827938280382813828238283382843828538286382873828838289382903829138292382933829438295382963829738298382993830038301383023830338304383053830638307383083830938310383113831238313383143831538316383173831838319383203832138322383233832438325383263832738328383293833038331383323833338334383353833638337383383833938340383413834238343383443834538346383473834838349383503835138352383533835438355383563835738358383593836038361383623836338364383653836638367383683836938370383713837238373383743837538376383773837838379383803838138382383833838438385383863838738388383893839038391383923839338394383953839638397383983839938400384013840238403384043840538406384073840838409384103841138412384133841438415384163841738418384193842038421384223842338424384253842638427384283842938430384313843238433384343843538436384373843838439384403844138442384433844438445384463844738448384493845038451384523845338454384553845638457384583845938460384613846238463384643846538466384673846838469384703847138472384733847438475384763847738478384793848038481384823848338484384853848638487384883848938490384913849238493384943849538496384973849838499385003850138502385033850438505385063850738508385093851038511385123851338514385153851638517385183851938520385213852238523385243852538526385273852838529385303853138532385333853438535385363853738538385393854038541385423854338544385453854638547385483854938550385513855238553385543855538556385573855838559385603856138562385633856438565385663856738568385693857038571385723857338574385753857638577385783857938580385813858238583385843858538586385873858838589385903859138592385933859438595385963859738598385993860038601386023860338604386053860638607386083860938610386113861238613386143861538616386173861838619386203862138622386233862438625386263862738628386293863038631386323863338634386353863638637386383863938640386413864238643386443864538646386473864838649386503865138652386533865438655386563865738658386593866038661386623866338664386653866638667386683866938670386713867238673386743867538676386773867838679386803868138682386833868438685386863868738688386893869038691386923869338694386953869638697386983869938700387013870238703387043870538706387073870838709387103871138712387133871438715387163871738718387193872038721387223872338724387253872638727387283872938730387313873238733387343873538736387373873838739387403874138742387433874438745387463874738748387493875038751387523875338754387553875638757387583875938760387613876238763387643876538766387673876838769387703877138772387733877438775387763877738778387793878038781387823878338784387853878638787387883878938790387913879238793387943879538796387973879838799388003880138802388033880438805388063880738808388093881038811388123881338814388153881638817388183881938820388213882238823388243882538826388273882838829388303883138832388333883438835388363883738838388393884038841388423884338844388453884638847388483884938850388513885238853388543885538856388573885838859388603886138862388633886438865388663886738868388693887038871388723887338874388753887638877388783887938880388813888238883388843888538886388873888838889388903889138892388933889438895388963889738898388993890038901389023890338904389053890638907389083890938910389113891238913389143891538916389173891838919389203892138922389233892438925389263892738928389293893038931389323893338934389353893638937389383893938940389413894238943389443894538946389473894838949389503895138952389533895438955389563895738958389593896038961389623896338964389653896638967389683896938970389713897238973389743897538976389773897838979389803898138982389833898438985389863898738988389893899038991389923899338994389953899638997389983899939000390013900239003390043900539006390073900839009390103901139012390133901439015390163901739018390193902039021390223902339024390253902639027390283902939030390313903239033390343903539036390373903839039390403904139042390433904439045390463904739048390493905039051390523905339054390553905639057390583905939060390613906239063390643906539066390673906839069390703907139072390733907439075390763907739078390793908039081390823908339084390853908639087390883908939090390913909239093390943909539096390973909839099391003910139102391033910439105391063910739108391093911039111391123911339114391153911639117391183911939120391213912239123391243912539126391273912839129391303913139132391333913439135391363913739138391393914039141391423914339144391453914639147391483914939150391513915239153391543915539156391573915839159391603916139162391633916439165391663916739168391693917039171391723917339174391753917639177391783917939180391813918239183391843918539186391873918839189391903919139192391933919439195391963919739198391993920039201392023920339204392053920639207392083920939210392113921239213392143921539216392173921839219392203922139222392233922439225392263922739228392293923039231392323923339234392353923639237392383923939240392413924239243392443924539246392473924839249392503925139252392533925439255392563925739258392593926039261392623926339264392653926639267392683926939270392713927239273392743927539276392773927839279392803928139282392833928439285392863928739288392893929039291392923929339294392953929639297392983929939300393013930239303393043930539306393073930839309393103931139312393133931439315393163931739318393193932039321393223932339324393253932639327393283932939330393313933239333393343933539336393373933839339393403934139342393433934439345393463934739348393493935039351393523935339354393553935639357393583935939360393613936239363393643936539366393673936839369393703937139372393733937439375393763937739378393793938039381393823938339384393853938639387393883938939390393913939239393393943939539396393973939839399394003940139402394033940439405394063940739408394093941039411394123941339414394153941639417394183941939420394213942239423394243942539426394273942839429394303943139432394333943439435394363943739438394393944039441394423944339444394453944639447394483944939450394513945239453394543945539456394573945839459394603946139462394633946439465394663946739468394693947039471394723947339474394753947639477394783947939480394813948239483394843948539486394873948839489394903949139492394933949439495394963949739498394993950039501395023950339504395053950639507395083950939510395113951239513395143951539516395173951839519395203952139522395233952439525395263952739528395293953039531395323953339534395353953639537395383953939540395413954239543395443954539546395473954839549395503955139552395533955439555395563955739558395593956039561395623956339564395653956639567395683956939570395713957239573395743957539576395773957839579395803958139582395833958439585395863958739588395893959039591395923959339594395953959639597395983959939600396013960239603396043960539606396073960839609396103961139612396133961439615396163961739618396193962039621396223962339624396253962639627396283962939630396313963239633396343963539636396373963839639396403964139642396433964439645396463964739648396493965039651396523965339654396553965639657396583965939660396613966239663396643966539666396673966839669396703967139672396733967439675396763967739678396793968039681396823968339684396853968639687396883968939690396913969239693396943969539696396973969839699397003970139702397033970439705397063970739708397093971039711397123971339714397153971639717397183971939720397213972239723397243972539726397273972839729397303973139732397333973439735397363973739738397393974039741397423974339744397453974639747397483974939750397513975239753397543975539756397573975839759397603976139762397633976439765397663976739768397693977039771397723977339774397753977639777397783977939780397813978239783397843978539786397873978839789397903979139792397933979439795397963979739798397993980039801398023980339804398053980639807398083980939810398113981239813398143981539816398173981839819398203982139822398233982439825398263982739828398293983039831398323983339834398353983639837398383983939840398413984239843398443984539846398473984839849398503985139852398533985439855398563985739858398593986039861398623986339864398653986639867398683986939870398713987239873398743987539876398773987839879398803988139882398833988439885398863988739888398893989039891398923989339894398953989639897398983989939900399013990239903399043990539906399073990839909399103991139912399133991439915399163991739918399193992039921399223992339924399253992639927399283992939930399313993239933399343993539936399373993839939399403994139942399433994439945399463994739948399493995039951399523995339954399553995639957399583995939960399613996239963399643996539966399673996839969399703997139972399733997439975399763997739978399793998039981399823998339984399853998639987399883998939990399913999239993399943999539996399973999839999400004000140002400034000440005400064000740008400094001040011400124001340014400154001640017400184001940020400214002240023400244002540026400274002840029400304003140032400334003440035400364003740038400394004040041400424004340044400454004640047400484004940050400514005240053400544005540056400574005840059400604006140062400634006440065400664006740068400694007040071400724007340074400754007640077400784007940080400814008240083400844008540086400874008840089400904009140092400934009440095400964009740098400994010040101401024010340104401054010640107401084010940110401114011240113401144011540116401174011840119401204012140122401234012440125401264012740128401294013040131401324013340134401354013640137401384013940140401414014240143401444014540146401474014840149401504015140152401534015440155401564015740158401594016040161401624016340164401654016640167401684016940170401714017240173401744017540176401774017840179401804018140182401834018440185401864018740188401894019040191401924019340194401954019640197401984019940200402014020240203402044020540206402074020840209402104021140212402134021440215402164021740218402194022040221402224022340224402254022640227402284022940230402314023240233402344023540236402374023840239402404024140242402434024440245402464024740248402494025040251402524025340254402554025640257402584025940260402614026240263402644026540266402674026840269402704027140272402734027440275402764027740278402794028040281402824028340284402854028640287402884028940290402914029240293402944029540296402974029840299403004030140302403034030440305403064030740308403094031040311403124031340314403154031640317403184031940320403214032240323403244032540326403274032840329403304033140332403334033440335403364033740338403394034040341403424034340344403454034640347403484034940350403514035240353403544035540356403574035840359403604036140362403634036440365403664036740368403694037040371403724037340374403754037640377403784037940380403814038240383403844038540386403874038840389403904039140392403934039440395403964039740398403994040040401404024040340404404054040640407404084040940410404114041240413404144041540416404174041840419404204042140422404234042440425404264042740428404294043040431404324043340434404354043640437404384043940440404414044240443404444044540446404474044840449404504045140452404534045440455404564045740458404594046040461404624046340464404654046640467404684046940470404714047240473404744047540476404774047840479404804048140482404834048440485404864048740488404894049040491404924049340494404954049640497404984049940500405014050240503405044050540506405074050840509405104051140512405134051440515405164051740518405194052040521405224052340524405254052640527405284052940530405314053240533405344053540536405374053840539405404054140542405434054440545405464054740548405494055040551405524055340554405554055640557405584055940560405614056240563405644056540566405674056840569405704057140572405734057440575405764057740578405794058040581405824058340584405854058640587405884058940590405914059240593405944059540596405974059840599406004060140602406034060440605406064060740608406094061040611406124061340614406154061640617406184061940620406214062240623406244062540626406274062840629406304063140632406334063440635406364063740638406394064040641406424064340644406454064640647406484064940650406514065240653406544065540656406574065840659406604066140662406634066440665406664066740668406694067040671406724067340674406754067640677406784067940680406814068240683406844068540686406874068840689406904069140692406934069440695406964069740698406994070040701407024070340704407054070640707407084070940710407114071240713407144071540716407174071840719407204072140722407234072440725407264072740728407294073040731407324073340734407354073640737407384073940740407414074240743407444074540746407474074840749407504075140752407534075440755407564075740758407594076040761407624076340764407654076640767407684076940770407714077240773407744077540776407774077840779407804078140782407834078440785407864078740788407894079040791407924079340794407954079640797407984079940800408014080240803408044080540806408074080840809408104081140812408134081440815408164081740818408194082040821408224082340824408254082640827408284082940830408314083240833408344083540836408374083840839408404084140842408434084440845408464084740848408494085040851408524085340854408554085640857408584085940860408614086240863408644086540866408674086840869408704087140872408734087440875408764087740878408794088040881408824088340884408854088640887408884088940890408914089240893408944089540896408974089840899409004090140902409034090440905409064090740908409094091040911409124091340914409154091640917409184091940920409214092240923409244092540926409274092840929409304093140932409334093440935409364093740938409394094040941409424094340944409454094640947409484094940950409514095240953409544095540956409574095840959409604096140962409634096440965409664096740968409694097040971409724097340974409754097640977409784097940980409814098240983409844098540986409874098840989409904099140992409934099440995409964099740998409994100041001410024100341004410054100641007410084100941010410114101241013410144101541016410174101841019410204102141022410234102441025410264102741028410294103041031410324103341034410354103641037410384103941040410414104241043410444104541046410474104841049410504105141052410534105441055410564105741058410594106041061410624106341064410654106641067410684106941070410714107241073410744107541076410774107841079410804108141082410834108441085410864108741088410894109041091410924109341094410954109641097410984109941100411014110241103411044110541106411074110841109411104111141112411134111441115411164111741118411194112041121411224112341124411254112641127411284112941130411314113241133411344113541136411374113841139411404114141142411434114441145411464114741148411494115041151411524115341154411554115641157411584115941160411614116241163411644116541166411674116841169411704117141172411734117441175411764117741178411794118041181411824118341184411854118641187411884118941190411914119241193411944119541196411974119841199412004120141202412034120441205412064120741208412094121041211412124121341214412154121641217412184121941220412214122241223412244122541226412274122841229412304123141232412334123441235412364123741238412394124041241412424124341244412454124641247412484124941250412514125241253412544125541256412574125841259412604126141262412634126441265412664126741268412694127041271412724127341274412754127641277412784127941280412814128241283412844128541286412874128841289412904129141292412934129441295412964129741298412994130041301413024130341304413054130641307413084130941310413114131241313413144131541316413174131841319413204132141322413234132441325413264132741328413294133041331413324133341334413354133641337413384133941340413414134241343413444134541346413474134841349413504135141352413534135441355413564135741358413594136041361413624136341364413654136641367413684136941370413714137241373413744137541376413774137841379413804138141382413834138441385413864138741388413894139041391413924139341394413954139641397413984139941400414014140241403414044140541406414074140841409414104141141412414134141441415414164141741418414194142041421414224142341424414254142641427414284142941430414314143241433414344143541436414374143841439414404144141442414434144441445414464144741448414494145041451414524145341454414554145641457414584145941460414614146241463414644146541466414674146841469414704147141472414734147441475414764147741478414794148041481414824148341484414854148641487414884148941490414914149241493414944149541496414974149841499415004150141502415034150441505415064150741508415094151041511415124151341514415154151641517415184151941520415214152241523415244152541526415274152841529415304153141532415334153441535415364153741538415394154041541415424154341544415454154641547415484154941550415514155241553415544155541556415574155841559415604156141562415634156441565415664156741568415694157041571415724157341574415754157641577415784157941580415814158241583415844158541586415874158841589415904159141592415934159441595415964159741598415994160041601416024160341604416054160641607416084160941610416114161241613416144161541616416174161841619416204162141622416234162441625416264162741628416294163041631416324163341634416354163641637416384163941640416414164241643416444164541646416474164841649416504165141652416534165441655416564165741658416594166041661416624166341664416654166641667416684166941670416714167241673416744167541676416774167841679416804168141682416834168441685416864168741688416894169041691416924169341694416954169641697416984169941700417014170241703417044170541706417074170841709417104171141712417134171441715417164171741718417194172041721417224172341724417254172641727417284172941730417314173241733417344173541736417374173841739417404174141742417434174441745417464174741748417494175041751417524175341754417554175641757417584175941760417614176241763417644176541766417674176841769417704177141772417734177441775417764177741778417794178041781417824178341784417854178641787417884178941790417914179241793417944179541796417974179841799418004180141802418034180441805418064180741808418094181041811418124181341814418154181641817418184181941820418214182241823418244182541826418274182841829418304183141832418334183441835418364183741838418394184041841418424184341844418454184641847418484184941850418514185241853418544185541856418574185841859418604186141862418634186441865418664186741868418694187041871418724187341874418754187641877418784187941880418814188241883418844188541886418874188841889418904189141892418934189441895418964189741898418994190041901419024190341904419054190641907419084190941910419114191241913419144191541916419174191841919419204192141922419234192441925419264192741928419294193041931419324193341934419354193641937419384193941940419414194241943419444194541946419474194841949419504195141952419534195441955419564195741958419594196041961419624196341964419654196641967419684196941970419714197241973419744197541976419774197841979419804198141982419834198441985419864198741988419894199041991419924199341994419954199641997419984199942000420014200242003420044200542006420074200842009420104201142012420134201442015420164201742018420194202042021420224202342024420254202642027420284202942030420314203242033420344203542036420374203842039420404204142042420434204442045420464204742048420494205042051420524205342054420554205642057420584205942060420614206242063420644206542066420674206842069420704207142072420734207442075420764207742078420794208042081420824208342084420854208642087420884208942090420914209242093420944209542096420974209842099421004210142102421034210442105421064210742108421094211042111421124211342114421154211642117421184211942120421214212242123421244212542126421274212842129421304213142132421334213442135421364213742138421394214042141421424214342144421454214642147421484214942150421514215242153421544215542156421574215842159421604216142162421634216442165421664216742168421694217042171421724217342174421754217642177421784217942180421814218242183421844218542186421874218842189421904219142192421934219442195421964219742198421994220042201422024220342204422054220642207422084220942210422114221242213422144221542216422174221842219422204222142222422234222442225422264222742228422294223042231422324223342234422354223642237422384223942240422414224242243422444224542246422474224842249422504225142252422534225442255422564225742258422594226042261422624226342264422654226642267422684226942270422714227242273422744227542276422774227842279422804228142282422834228442285422864228742288422894229042291422924229342294422954229642297422984229942300423014230242303423044230542306423074230842309423104231142312423134231442315423164231742318423194232042321423224232342324423254232642327423284232942330423314233242333423344233542336423374233842339423404234142342423434234442345423464234742348423494235042351423524235342354423554235642357423584235942360423614236242363423644236542366423674236842369423704237142372423734237442375423764237742378423794238042381423824238342384423854238642387423884238942390423914239242393423944239542396423974239842399424004240142402424034240442405424064240742408424094241042411424124241342414424154241642417424184241942420424214242242423424244242542426424274242842429424304243142432424334243442435424364243742438424394244042441424424244342444424454244642447424484244942450424514245242453424544245542456424574245842459424604246142462424634246442465424664246742468424694247042471424724247342474424754247642477424784247942480424814248242483424844248542486424874248842489424904249142492424934249442495424964249742498424994250042501425024250342504425054250642507425084250942510425114251242513425144251542516425174251842519425204252142522425234252442525425264252742528425294253042531425324253342534425354253642537425384253942540425414254242543425444254542546425474254842549425504255142552425534255442555425564255742558425594256042561425624256342564425654256642567 |
- commit 0c32565f536609d78feef35c88bbc39d3ac53a73
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Wed Sep 10 09:18:34 2008 -0500
- Update mailing list email and archive addresses
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
- Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
- Date: Thu Sep 11 15:40:01 2008 +0200
- 85xx: socrates: autoprobe Lime chip
- This patch is an attempt to implement autoprobing for the Lime
- presence on the bus.
- Configure GPCM for Lime CS2 and try to access chip ID registers.
- Second read atempt delivers register values if the chip is present.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
- Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
- Date: Thu Sep 11 15:40:01 2008 +0200
- 85xx: socrates: Add support for new image format.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Sep 11 17:28:18 2008 +0900
- sh: Fix compile error for r2dplus
- netdev.h was not include by r2dplus.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- commit 56844a22b76c719e600047e23b80465a44d76abd
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Sep 11 08:11:23 2008 +0200
- powerpc: Fix bootm to boot up again with a Ramdisk
- Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
- and this stopped Linux from booting with a Ramdisk. This patch fixes
- this, by deleting the useless dummy mem reservation.
- When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
- added to of_size, so we dont need anymore a dummy mem reservation.
- I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
- system (=0x44 bytes) and rounded it up to 0x80).
- Signed-off-by: Heiko Schocher <hs@denx.de>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
- Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
- Date: Mon Sep 8 02:46:13 2008 +0200
- Add support for LZMA uncompression algorithm.
- Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0008b6d968160abe2bfd936493f3a516a7c8da20
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Jun 27 23:04:20 2008 +0400
- fsl_elbc_nand: ecclayout cleanups
- This patch deletes oobavail assignments, they're calculated by the nand
- core code in nand_scan_tail, plus current oobavail values are wrong for
- the LP NANDs.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Jun 27 23:04:13 2008 +0400
- fsl_elbc_nand: implement support for flash-based BBT
- This patch implements support for flash-based BBT for chips working
- through ELBC NAND controller, so that NAND core will not have to re-scan
- for bad blocks on every boot.
- Because ELBC controller may provide HW-generated ECCs we should adjust
- bbt pattern and bbt version positions in the OOB free area.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 97ae023648e764f794ffb9c52da109d6caf09c47
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Jun 27 23:04:04 2008 +0400
- fsl_elbc_nand: fix OOB workability for large page NAND chips
- For large page chips, nand_bbt is looking into OOB area, and checking
- for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
- reserved for bbt means.
- But ELBC driver is specifying ecclayout so that oobfree area starts at
- offset 1, so only one byte left for the bbt purposes.
- This causes problems with any OOB users, namely JFFS2: after first mount
- JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
- OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
- OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- And on the next boot, NAND core will rescan for bad blocks, then will
- see "0xff 0x19" pattern, and will mark all blocks as bad ones.
- To fix the issue we should implement our own bad block pattern: just one
- byte at OOB start. Though, this will work only for x8 chips. For x16
- chips two bytes must be checked. Since ELBC driver does not support x16
- NANDs (yet), we're safe for now.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 7238ada313057a85409485b8ee21515dc10c07a5
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Sep 12 13:52:21 2008 +0200
- MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b18410e508a12ba0a177dfc2a386857c806fa96d
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Sep 11 13:05:56 2008 +0200
- ppc4xx: Enable device tree (FDT) support in zeus board port
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Sep 10 16:53:47 2008 +0200
- ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
- This patch fixes a problem introdiced with patch
- bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
- initdram()].
- The boards affected are:
- - PCI405
- - PPChameleonEVB
- - quad100hd
- - taihu
- - zeus
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 61737c59a3285f6fadf96a5836879898c04ec28d
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Thu Sep 11 19:41:26 2008 -0400
- ppc4xx: Add .gitignore file to xilinx-ppc440 boards
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Thu Sep 11 19:41:25 2008 -0400
- ppc4xx: Fix compilation of v5fx30teval_flash
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Sep 10 17:44:30 2008 -0400
- ppc4xx: Fix in-tree build for ppc440-generic boards
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Sep 12 02:20:47 2008 +0200
- ARM: synchronize mach-types.h with linux 2.6.27-rc6
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
- Author: Jens Scharsig <esw@bus-elektronik.de>
- Date: Fri Sep 12 02:20:47 2008 +0200
- at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
- This patch prevents linker error on AT91RM9200 boards, if
- CONFIG_CMD_I2_TREE is set.
- It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
- Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
- commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Sep 12 02:20:47 2008 +0200
- ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
- ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 03db53335c8eba656a7c44d1555b1a4514383e33
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Fri Sep 12 02:20:46 2008 +0200
- make: Remove redundant __ARM__ addition when cross-compiling on *BSD
- __ARM__ is given by arm_config.mk automatically.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
- Author: Claudio Scordino <claudio@evidence.eu.com>
- Date: Fri Sep 12 02:20:46 2008 +0200
- Fix MACH_TYPE for the AT91RM9200DK board.
- Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
- commit 274737e5eb25b2bcd3af3a96da923effd543284f
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Fri Sep 12 02:20:46 2008 +0200
- i.mx change get_timer(base) to return time since base
- This patch changes get_timer() for i.MX to return the time since
- 'base' instead of the time since the counter was at zero.
- Symptom seen is flash timeout errors when erasing or programming a
- sector using the common cfi flash code.
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- commit 48fed40575b3e8eae960eb0141509ddd9a73012a
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Fri Sep 12 02:20:46 2008 +0200
- i.MX use u-boot baud rate and don't assume UART master clock
- 1) Change the i.MX serial driver to use the baud rate set in the
- u-boot environment
- 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
- 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
- one to clear" like other status bits in the reg.)
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- commit 6e1551a870d360805b9d172dc56d935064abe71d
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Fri Sep 12 02:20:46 2008 +0200
- arm920t fix constant error in start.S
- Code in cpu/arm920t/start.S will die with a compilation error if
- CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
- the ARM sub instruction. Change the code so that each is subtracted
- independently to avoid the error.
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Fri Sep 12 02:20:40 2008 +0200
- ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
- - Correct Invalid #define of MPUTIM_PTV_MASK for
- omap1510 & omap730 register definition
- MPUTIM_PTV_MASK is defined as
- #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
- while it should have been
- #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
- - Below Patch corrects the same
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
- Author: Adrian Filipi <adrian.filipi@eurotech.com>
- Date: Fri Jul 18 11:52:02 2008 -0400
- Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
- Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
- commit eb16135df20535b0d19969f50fb5bd17f95e9c25
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Aug 28 12:25:11 2008 +0200
- i.MX31: document timer precision option
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 1a6337b01351b82a45b0defa76f08744511c580b
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Fri Aug 29 10:36:18 2008 +0200
- i.MX31: Make the SPI bus and chip select configurable for MC13783
- The i.MX31 has three SPI buses and each bus has several chip selects
- and the MC13783 chip can be connected to any of these. The current
- RTC driver for MC13783 is hardcoded for CSPI2/SS2.
- This patch makes make MC13783 SPI bus and chip select configurable
- via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit 8c4ebec25b21e355b8488698ec1594da9701fff4
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Fri Aug 29 10:36:17 2008 +0200
- i.MX31: Add reset_timer() and modify get_timer_masked().
- This patch adds the reset_timer() function (needed by nand_base.c) and
- modifies the get_timer_masked() to work in the same way as the omap24xx
- function.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit deeec4991a55de243787002ede24d2331d234fc8
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:09 2008 +0200
- ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:09 2008 +0200
- bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0e8d158664a913392cb01fb11a948d83f72e105e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:06 2008 +0200
- rename CFG_ENV macros to CONFIG_ENV
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:05 2008 +0200
- nvedit: rename error comment to CONFIG_ENV_IS_IN_
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b64b775e7546ed138df360ceb3a71ee358cb9a01
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:05 2008 +0200
- cmd_mem: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:05 2008 +0200
- move cmd_get_data_size to command.c
- add CMD_DATA_SIZE macro to enable it
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 507641d2491980531932b9f25dab37fe5e6c3a1a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:04 2008 +0200
- env_flash: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5a1aceb0689e2f731491838970884a673ef7e7d3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:04 2008 +0200
- rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:03 2008 +0200
- cleanup use of CFG_ENV_IS_IN_FLASH
- - #if CFG_ENV_IS_IN_FLASH
- - #if (CFG_ENV_IS_IN_FLASH == 1)
- - #define CFG_ENV_IS_IN_FLASH 0
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:01 2008 +0200
- rename environment.c in env_embedded.c to reflect is functionality
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c0878af6e32f0fd8e13a6ca315b9add64441115a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:01 2008 +0200
- env_nowhere: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 93f6d72544da4510a146bc4c93d609b0116cde37
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:00 2008 +0200
- rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2556ef78113b5f089dfcac5da90bf31dd568397b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:00 2008 +0200
- env_sf: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:00 2008 +0200
- rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 55c5f49910ec8225347aa1d211352a84de6649b4
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:00 2008 +0200
- env_onenand: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9656138ff1a34d4c4768db6b490deffc40ee674b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:59 2008 +0200
- rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 957a0e69575683efd70ace147746bbb3d8e7c501
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:59 2008 +0200
- env_nvram: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9314cee6917444ab88bd4e758da7a30975120187
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:59 2008 +0200
- rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:59 2008 +0200
- env_nand: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 51bfee192099206a4397f15f3b93516e01f58ab0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:58 2008 +0200
- rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:58 2008 +0200
- env_dataflash: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 057c849c45b9ee19df8ff3acdeee66be52819962
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:58 2008 +0200
- rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:52 2008 +0200
- cmd_eeprom: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Sep 5 09:19:54 2008 +0200
- env_eeprom: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Sep 5 09:19:30 2008 +0200
- rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 32628c5008105a732212003d83b75f05e5243bb2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 30 23:54:58 2008 +0200
- cmd_mac: Move conditional compilation to Makefile
- finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
- start in commit ad8f8687b78c3e917b173f038926695383c55555
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e5648acab153f0f429bfc714902c5aaa7879f71b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 30 23:47:41 2008 +0200
- cmd_fdc: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 30 23:47:38 2008 +0200
- common/Makefile: add core command section
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 30 23:29:57 2008 +0200
- cmd_vfd: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6644641d072aee3087da129d8443187196a4d8a9
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Sep 10 11:48:49 2008 -0500
- delta, zylonite: Update nand_oobinfo to nand_ecclayout.
- This is part of the switch to newer upstream MTD code.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Sat Aug 30 17:06:55 2008 -0400
- ARM DaVinci: Fix broken HW ECC for large page NAND.
- Based on original patch by Bernard Blackham <bernard@largestprime.net>
- U-boot's HW ECC support for large page NAND on Davinci is completely
- broken. Some kernels, such as the 2.6.10 one supported by
- MontaVista for DaVinci, rely upon this broken behaviour as they
- share the same code for ECCs. In the existing scheme, error
- detection *might* work on large page, but error correction
- definitely does not. Small page ECC correction works, but the
- format is not compatible with the mainline git kernel.
- This patch adds ECC code that matches what is currently in the
- Davinci git repository (since NAND support was added in 2.6.24).
- This makes the ECC and OOB layout written by u-boot compatible with
- Linux for both small page and large page devices and fixes ECC
- correction for large page devices.
- The old behaviour can be restored by defining the macro
- CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Acked-by: Sergey Kubushyn <ksi@koi8.net>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
- Author: Heiko Schocher <hs@denx.de>
- Date: Wed Sep 10 11:15:28 2008 +0200
- muas3001: update BR4 settings
- Also set up the port pins for using I2C.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 3591293509e0c0bcf244b0f974775bff2e25697e
- Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
- Date: Wed Sep 10 09:43:49 2008 +0300
- autoscr: Fix one-character lines and non-newline terminated scripts
- When not using hush, the autoscr command now executes lines that are
- only one character long. It also runs the last line of scripts even if
- it does not end in a newline.
- Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
- commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
- Author: Victor Gallardo <vgallardo@amcc.com>
- Date: Tue Sep 9 15:13:29 2008 -0700
- ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
- On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
- and glacier.
- Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
- commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
- Author: Heiko Schocher <hs@denx.de>
- Date: Mon Sep 8 10:21:11 2008 +0200
- muas3001: added support for the LM75 sensor.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
- Author: Heiko Schocher <hs@denx.de>
- Date: Mon Sep 8 10:20:19 2008 +0200
- muas3001: activate WDT for the muas3001 board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
- Author: Heiko Schocher <hs@denx.de>
- Date: Mon Sep 8 10:19:36 2008 +0200
- muas3001: added 64MB SDRAM autodetection.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 5251469943895de4bb9a04d5053352cc22acb7d5
- Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Date: Thu Aug 21 07:12:26 2008 -0700
- Fix printf errors under -DDEBUG
- Fix printf format-string/arg mismatches under -DDEBUG.
- These warnings occur with DEBUG defined for a platform using
- cpu/mpc85xx. Users of other architectures can unearth similar
- problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
- after "CFLAGS += $(call cc-option,-fno-stack-protector)".
- Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 23:55:18 2008 +0200
- Update CHANGELOG, prepare 2008-10-rc1 release
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Sep 8 08:51:29 2008 -0500
- 85xx: Ensure timebase is zero on secondary cores
- The e500um says the timebase is volatile out of reset. To ensure
- TB sync works we need to make sure its zero.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 22:18:24 2008 +0200
- bootm_load_os: fix load_end debug message
- print load_end value not pointer
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1d9af0be764960e6cc1c093e97176c3542796820
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 22:18:23 2008 +0200
- bootm: enable fdt support only on ppc, m68k and sparc
- ...as done in image.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 748b5274e76f81df85cfcffaffedc323678d0623
- Author: Markus Heidelberg <markus.heidelberg@web.de>
- Date: Tue Sep 9 18:51:05 2008 +0200
- common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
- Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
- commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
- Author: Markus Heidelberg <markus.heidelberg@web.de>
- Date: Tue Sep 9 17:31:46 2008 +0200
- gitignore: add tags files and Vim swap file
- Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
- commit 1d9b67b23fca6a25154333733204339802510720
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Tue Sep 9 17:52:47 2008 +0900
- add board_eth_init() for sh7785lcr board
- Fix the problem that cannot work RTL8169 on sh7785lcr board.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 16:08:41 2008 -0500
- mtd: SPI Flash: Support the STMicro Flash
- Add MTD SPI Flash support for M25P16, M25P20, M25P32,
- M25P40, M25P64, M25P80, M25P128.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 17:55:31 2008 +0200
- trab: fix build problem after change to use do_div()
- We must link with libgeneric now.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
- Author: Ryan CHEN <ryan.chen@st.com>
- Date: Wed Aug 20 13:00:17 2008 -0400
- Correct drv_usb_kbd_init function
- The patch is that check if usb_get_dev_index() function return valid
- pointer. If valid, continue. Otherwise return -1.
- Signed-off-by: Ryan Chen <ryan.chen@st.com>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Aug 20 11:22:02 2008 +0200
- Make usb-stop() safe to call multiple times in a row.
- A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
- enabled the usb_stop() command in common/cmd_bootm.c which was
- not enabled for some time, because no board did actually set the
- CFG_CMD_USB flag. So, now the usb_stop() is executed before
- loading the linux kernel.
- However, the usb_ohci driver hangs up (at least on AT91SAM) if the
- driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
- If some other piece of code calls usb_stop() before the bootm command,
- this command will hangup the system during boot.
- (usb start and stop is typically used while booting from usb memory stick)
- But, stopping the usb stack twice is useless anyway, and a flag already
- existed that kept track on the usb_init()/usb_stop() calls.
- So, we now check if the usb stack is really started before we stop it.
- This problem is now fixed in both the upper as low-level layer.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 16:55:47 2008 +0200
- Makefile: fix bug introduced by commit 47ffd6c2
- commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Tue Sep 9 10:00:33 2008 -0400
- ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
- This patch solves the problems compiling ml507, v5fx30teval and
- ppc440-generic out of tree.
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
- Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
- Date: Thu Sep 4 15:35:46 2008 -0300
- Fix dev_print when called from usb_stor_info (usb storage command)
- Fix output of the usb storage command. It was printing "Device 0: not
- available" because IF_TYPE_USB was not included into the switch
- statement.
- Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
- commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Sep 9 12:58:16 2008 +0200
- FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 919f550dc11a13abf01c6bc713c968de790b8d7c
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Sep 9 12:58:15 2008 +0200
- FIT: add ability to check hashes of all images in FIT, improve output
- - add function fit_all_image_check_hashes() that verifies if all
- hashes of all images in the FIT are valid
- - improve output of fit_image_check_hashes() when the hash check fails
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 1de1fa408967cef6804bb046b904114519bb36f0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 8 20:54:39 2008 +0200
- qemu_mips: Update linux bootm to support dynamic cmdline
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Mon Sep 8 14:56:49 2008 -0500
- Add support for booting of INTEGRITY operating system uImages
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 8 21:01:29 2008 +0200
- mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Sep 8 13:57:12 2008 -0500
- Remove support for booting ARTOS images
- Pantelis Antoniou stated:
- AFAIK, it is still used but the products using PPC are long gone.
- Nuke it plz (from orbit).
- So remove it since it cleans up a usage of env_get_char outside of
- the environment code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 15:45:18 2008 +0200
- Makefile: compile and link each module just once
- Several source files need to be compiled and linked when one or more
- config options are selected. To allow for easy selection in the
- Makefiles yet to avoild multiple compilation (which costs build time)
- and especially multiple linking (which causes errors), we use
- "COBJS = $(sort COBJS-y)" which eliminates duplicates.
- By courtesy of Detlev Zundel who suggested this approach.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 48d0192fe869948fef14b460b5f0c85bca933693
- Author: Andreas Engel <andreas.engel@ericsson.com>
- Date: Mon Sep 8 14:30:53 2008 +0200
- Moved conditional compile into Makefile
- Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
- commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
- Author: Andreas Engel <andreas.engel@ericsson.com>
- Date: Mon Sep 8 10:17:31 2008 +0200
- Merged serial_pl010.c and serial_pl011.c.
- They only differ in the init function.
- This also adds the missing watchdog support for the PL011.
- Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
- commit 0817d688f307ee2c0598e79175c94a40ce90337b
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Sun Sep 7 17:10:27 2008 -0400
- Remove gap fill in srec object v2
- SREC files do not need gap fill: The load address is specified in the
- file. On the other hand, it can't be avoided in a .bin object. It has
- no information about memory location.
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
- Author: Markus Heidelberg <markus.heidelberg@web.de>
- Date: Sun Sep 7 20:18:27 2008 +0200
- README: fix missing subdirectory in the documentation
- Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
- commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
- Author: Graeme Russ <graeme.russ@gmail.com>
- Date: Sun Sep 7 07:08:42 2008 +1000
- Update i386 code (sc520_cdp)
- Attempt to bring i386 / sc520 inline with master
- Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
- commit 5608692104efa8d56df803dc79ea41ac3607eee5
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Sep 4 13:01:49 2008 +0200
- fw_env: add NAND support
- Add support for environment in NAND with automatic NOR / NAND recognition,
- including unaligned environment, bad-block skipping, redundant environment
- copy.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 9 09:50:24 2008 +0200
- ppc4xx: Fix out-of-tree building of CPCI405 variants
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 59f630588e3fdbd698a0a2798e52a8924e899563
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Aug 15 15:42:11 2008 +0200
- Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit e64987a892353f3d49eb242d997820ef8f538912
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 15 15:42:13 2008 +0200
- 85xx: socrates: Enable Lime support.
- This patch adds Lime GDC support together with support for the PWM
- backlight control through the w83782d chip. The reset pin of the
- latter is attached to GPIO, so we need to reset it in
- early_board_init_r.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 3e79b588b5199f35016f178fc0d5d1266382097f
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Aug 15 15:42:12 2008 +0200
- 85xx: Socrates: Major code update.
- - Update the local bus ranges in the FDT for Linux for the various
- devices connected to the local bus via chip-select.
- - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
- lower than 66 MHz and uses I/O accessor functions consequently.
- - UPM data update.
- - Update of default environment and configuration. Use I2C multibus
- as we do have two I2C buses. Also enable sdram and ext2 commands.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit e8d18541c6ceab821f75faab031740b33fdbfa4b
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Jul 18 16:52:23 2008 +0200
- Update Freescale 85xx boards to sys_eeprom.c
- The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
- format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
- 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
- Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 10:08:02 2008 +0200
- lib_ppc/interrupts.c: make board_show_activity() a weak function
- This allows to use show_activity() without having to
- define an empty board_show_activity() function.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fe876787f8743883ce58fed61525eaa2f34da4c5
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 10:06:44 2008 +0200
- stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 965de106ba8900372c8b16dc60d5acab7f925e38
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 10:03:47 2008 +0200
- NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Aug 15 15:42:11 2008 +0200
- Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 36241ca29d4804a1006fb3f26069effda5202581
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 15 15:42:13 2008 +0200
- 85xx: socrates: Enable Lime support.
- This patch adds Lime GDC support together with support for the PWM
- backlight control through the w83782d chip. The reset pin of the
- latter is attached to GPIO, so we need to reset it in
- early_board_init_r.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Aug 15 15:42:12 2008 +0200
- 85xx: Socrates: Major code update.
- - Update the local bus ranges in the FDT for Linux for the various
- devices connected to the local bus via chip-select.
- - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
- lower than 66 MHz and uses I/O accessor functions consequently.
- - UPM data update.
- - Update of default environment and configuration. Use I2C multibus
- as we do have two I2C buses. Also enable sdram and ext2 commands.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 01:22:39 2008 +0200
- disk-on-chip: remove duplicate doc_probe declaration
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 00:59:40 2008 +0200
- onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 00:59:39 2008 +0200
- rs5c372: fix rtc_set prototype
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu Aug 14 14:08:28 2008 +0200
- ARM: fix warning: target CPU does not support interworking
- This patch fixes warnings like this:
- start.S:0: warning: target CPU does not support interworking
- which come from some ARM cross compilers and are caused by hard-coded
- (with "--with-cpu=arm9" configuration option) ARM targets (which
- support ARM Thumb instructions), while the ARM target selected from
- the command line (with "-march=armv4") doesn't support Thumb
- instructions.
- This warning is issued by the compiler regardless of the real use of
- the Thumb instructions in code.
- To fix this problem, we use options according to compiler version
- being used.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4265c35fbcb248e58179007621d61d32d0b3b82a
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu Aug 14 14:08:28 2008 +0200
- ARM: Use do_div() instead of division for "long long".
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8febd13c69cb68652577d1a9fcbde954bf784155
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Jul 18 16:52:23 2008 +0200
- Update Freescale 85xx boards to sys_eeprom.c
- The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
- format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
- 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
- Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 23:26:22 2008 +0200
- lib_arm/bootm.c: fix compile warnings
- bootm.c:128: warning: label 'error' defined but not used
- bootm.c:65: warning: unused variable 'ret'
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2e3c867d0a63c563a51e65b776973b008f16cec5
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 22:46:42 2008 +0200
- ml507: fix out of tree build problem
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 22:10:28 2008 +0200
- common/cmd_bootm.c: fix printf() format warnings
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 22:37:45 2008 +0200
- BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
- missing doc_probe() prototype.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2c5e3cc4994897d364b148942ff23e47783198f6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 21:28:14 2008 +0200
- mk48t59: fix compile problem introduced by commit d1e23194
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5ff889349d2ace13f10c9335e09365fcec8247cc
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 8 14:11:12 2008 +0200
- ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
- This patch moves some 4xx specific prototypes out of include common.h
- to a ppc4xx specific header.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ac53ee8318678190bf3c68da477a84a657d86fb0
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Sep 5 15:34:04 2008 +0200
- ppc4xx: Update CPCI405(AB) configuration
- This patch add FDT support and command line editing capabilities
- for CPCI405 and CPCI405AB boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Sep 5 15:34:03 2008 +0200
- ppc4xx: Cleanup CPCI405 linker script
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Sep 5 15:34:02 2008 +0200
- ppc4xx: Update CPCI405 variants handling
- This patch replaces the BOARD_REVISION variable in include/config.mk
- by a using a temporary include file in the platform directory.
- The former way does not work anymore and the latter is also used by
- some other boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 8 10:01:48 2008 +0200
- ppc4xx: Remove CONFIG_CS8952_PHY define
- Since this define is only used on one board that was never really in
- production, removing this compile time option doesn't hurt and makes
- the code more readable.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Sep 5 14:11:40 2008 +0200
- ppc4xx: Fix compilation warning for PIP405
- This patch fixes a compilation warning for the PIP405 board. It moves the
- #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
- occur anymore. I am a little unsure if this #ifdef is at the correct
- place now or if it could be removed completely. This needs to get
- tested on the PIP405 board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Sep 5 14:09:09 2008 +0200
- ppc4xx: Fix compilation warning for canyonlands & glacier
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Sep 5 14:40:29 2008 -0500
- Fix compiler warning in mpc8xxx ddr code
- ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
- ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
- ctrl_regs.c:523: note: 'caslat' was declared here
- Add a warning in DDR1 case if cas_latency isn't a value we know about.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 1 23:06:23 2008 +0200
- rtc: allow rtc_set to return an error and use it in cmd_date
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 1 01:16:33 2008 +0200
- ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sun Aug 31 05:37:04 2008 +0900
- config.mk: Move arch-specific condition to $(ARCH)_config.mk
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 29 19:08:29 2008 -0500
- Prevent crash if random/invalid ramdisks are passed to bootm
- Adds returning an error from the ramdisk detection code if
- its not a real ramdisk (invalid). There is no reason we can't
- just return back to the console if we detect an invalid
- ramdisk or CRC error.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 29 21:04:45 2008 +0200
- Prevent crash if random DTB address is passed to bootm
- This patch adds bootm_start() return value check. If
- error status is returned, we do not proceed further to
- prevent board reset or crash as we still can recover
- at this point.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Fri Aug 29 12:30:39 2008 -0500
- clean up some #if !defined() in drivers/video/cfb_console.c
- rearrange some #if !defined() / #else / #endif statements to remove
- the negative logic.
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Fri Aug 29 09:02:20 2008 +0900
- apollon: use the last memory area for u-boot
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Aug 28 13:50:42 2008 +0200
- TQM8272: move NAND part in seperate File
- I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
- because I have no longer access to the hardware.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Aug 28 13:48:36 2008 +0200
- TQM8272: Fix compiling error for the TQM8272 board.
- Fix compile problems caused by
- commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 1a7f8ccec981648ccd38fca2535490582eee08e6
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Wed Aug 27 14:45:20 2008 +0900
- Add JFFS2 command support on OneNAND
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Mon Aug 25 19:21:30 2008 +0100
- Allow console input to be disabled
- Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
- When CONFIG_DISABLE_CONSOLE is defined, setting
- GD_FLG_DISABLE_CONSOLE disables all console input and output.
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- commit 2b22d608f370565c87f55928b524207031419c11
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Jul 30 12:39:29 2008 +0200
- loads: allow negative offsets
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Sep 4 11:19:05 2008 +0200
- USB EHCI: reset root hub
- Some of multi-function USB controllers (e.g. ISP1562) allow root hub
- resetting only via EHCI registers. So, this patch adds the
- corresponding kind of reset to OHCI's hc_reset() if the newly
- introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
- board).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit 5875d358f025c1b042d8a0f08384b756de7256c9
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Fri Aug 15 15:42:09 2008 +0200
- RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Sep 5 10:47:46 2008 +0200
- devices: Use list_add_tail() instead of list_add() to register a device
- This patch fixes a problem spotted on Glacier/Canyonlands (and most
- likely lots of other board ports), that no serial output was seen
- after console initialization in console_init_r(). This is because the
- last added console device was used instead of the first added.
- This patch fixes this problem by using list_add_tail() instead of
- list_add() to register a device. This way the first added console
- is used again.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 78d78236896d62bb8ca7302af38d8f1493eb2651
- Author: Victor Gallardo <vgallardo@amcc.com>
- Date: Thu Sep 4 23:49:36 2008 -0700
- ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
- This patch adds GPCS, SGMII and M88E1112 PHY support
- for the AMCC PPC460GT/EX processors.
- Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
- Author: Adam Graham <agraham@amcc.com>
- Date: Wed Sep 3 12:26:59 2008 -0700
- ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
- Signed-off-by: Adam Graham <agraham@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 075d0b81e896e8735ae26372cd384f87cbd24e41
- Author: Adam Graham <agraham@amcc.com>
- Date: Wed Sep 3 12:26:28 2008 -0700
- ppc4xx: IBM Memory Controller DDR autocalibration routines
- Alternate SDRAM DDR autocalibration routine that can be generically used
- for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
- support of more DIMM/memory chip vendors and gets the DDR autocalibration
- values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
- Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
- "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
- of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
- lot longer to run than Method_B. Method_B executes in the same amount of time
- as the currently existing DDR autocalibration routine, i.e. 1 second or so.
- Normally Method_B is used and it is set as the default method.
- The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
- Controller registers.[bit-field]:
- 1) SDRAM0_RQDC.[RQFD]
- 2) SDRAM0_RFDC.[RFFD]
- This alternate PPC4xx DDR autocalibration code calibrates the following
- IBM SDRAM Controller registers.[bit-field]:
- 1) SDRAM0_WRDTR.[WDTR]
- 2) SDRAM0_CLKTR.[CKTR]
- 3) SDRAM0_RQDC.[RQFD]
- 4) SDRAM0_RFDC.[RFFD]
- and will also use the calibrated settings of the above four registers that
- produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
- register.[bit-field].
- Signed-off-by: Adam Graham <agraham@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e07f4a8033b6270b8103049adb6456f660ff4a89
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Mon Sep 1 13:09:39 2008 -0400
- ppc44x: Unification of virtex5 pp440 boards
- This patch provides an unificated way of handling xilinx v5 ppc440 boards.
- It unificates 3 different things:
- 1) Source code
- A new board called ppc440-generic has been created. This board includes
- a generic tlb initialization (Maps the whole memory into virtual) and
- defines board_pre_init, checkboard, initdram and get_sys_info weakly,
- so, they can be replaced by specific functions.
- If a new board needs to redefine any of the previous functions
- (specific initialization) it can create a new directory with the
- specific initializations needed. (see the example ml507 board).
- 2) Configuration file
- Common configurations are located under configs/xilinx-ppc440.h, this
- header file interpretes the xparameters file generated by EDK and
- configurates u-boot in correspondence. Example: if there is a Temac,
- allows CMD_CONFIG_NET
- Specific configuration are located under specific configuration file.
- (see the example ml507 board)
- 3) Makefile
- Some work has been done in order to not duplicate work in the Main
- Makefile. Please see the attached code.
- In order to support new boards they can be implemented in the next way:
- a) Simple Generic Board (90% of the time)
- Using EDK generates a new xparameters.h file, replace
- ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
- && make
- b) Simple Boards with special u-boot parameters (9 % of the time)
- Create a new file under configs for it (use ml507.h as example) and
- change your paramaters. Create a new Makefile paragraph and compile
- c) Complex boards (1% of the time)
- Create a new folder for the board, like the ml507
- Finally, it adds support for the Avnet FX30T Evaluation board, following
- the new generic structure:
- Cheap board by Avnet for evaluating the Virtex5 FX technology.
- This patch adds support for:
- - UartLite
- - 16MB Flash
- - 64MB RAM
- Prior using U-boot in this board, read carefully the ERRATA by Avnet
- to solve some memory initialization issues.
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Tue Sep 2 15:21:16 2008 -0500
- mpc83xx: fix mpc8313 in-tree building with NAND
- and add mpc8313 NAND build to MAKEALL
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Aug 28 14:09:25 2008 -0700
- mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
- Cleans up some latent issues with the data cache control so that
- dcache_enable() and dcache_disable() will work reliably (after
- unlock_ram_in_cache() has been called)
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Aug 28 14:09:19 2008 -0700
- mpc83xx: Store and display Arbiter Event Register values
- Record the Arbiter Event Register values and optionally display them.
- The Arbiter Event Register can record the type and effective address of
- an arbiter error, even through an HRESET. This patch stores the values in
- the global data structure.
- Display of the Arbiter Event registers immediately after the RSR value
- can be enabled with defines. The Arbiter values will only be displayed
- if an arbiter event has occured since the last Power On Reset, and either
- of the following defines exist:
- #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
- and type register values
- #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
- event register values
- Address Only transactions are one of the trapped events that can register
- as an arbiter event. They occur with some cache manipulation instructions
- if the HID0_ABE (Address Broadcast Enable) is set and the memory region
- has the MEMORY_COHERENCE WIMG bit set. Setting:
- #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
- only events, so that it can still capture
- other real problems.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Aug 28 14:09:11 2008 -0700
- mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
- This is needed in unlock_ram_in_cache() because it is called from C and
- will corrupt the small data area anchor that is kept in R2.
- lock_ram_in_cache() is modified similarly as good coding practice, but
- is not called from C.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Fri Aug 22 23:52:50 2008 -0700
- MPC83XX: Fix GPIO configuration - set gpio level before direction
- Set DAT value before DIR values to avoid creating glitches on the
- GPIO signals.
- Set gpio level register before direction register to inhibit
- glitches on high level output pins.
- Dir and data gets cleared at powerup, so high level output lines see
- a short low pulse between setting the direction and level registers.
- Issue was seen on a new board with the nReset line of the NOR flash
- connected to a GPIO. Setting the direction register puts the NOR flash
- in reset so the next instruction to set the level cannot get executed.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 7007c5975ee900ad70983b0681d3251e221f8321
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 2 02:58:32 2008 +0200
- doc/qemu_mips: add doc howto debug u-boot with gdb
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Sep 3 17:15:45 2008 +0200
- ppx4xx: Fix broken DASA_SIM board
- This patch adds initdram() to DASA_SIM boards that has been
- removed accidentally by a previous commit.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 1 08:35:37 2008 +0200
- ppc4xx: Remove reference to common/lists.o from some esd linker scripts
- This patch removes some direct references to common/lists.o from some
- esd linker scripts. This is necessary because the lists source was moved
- and is not in the "common" directory anymore.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 97b0734d65f8a0b03df0a335a2addc759da56107
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 16:33:05 2008 +0200
- ppc4xx: Remove obsolete or unused functions from some esd boards
- This patch removes initdram() and testdram() from most esd 405 platforms.
- Some boards also have an empty dummy implementation of
- misc_init_f(). This is also removed.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 15:07:54 2008 +0200
- ppc4xx: Update VOM405 board configuration
- - remove PCI code
- - add command line editing
- - minor cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 15:07:53 2008 +0200
- ppc4xx: Remove obsolete initdram() function from VOM405 board
- This patch removed the obsolete initdram() function from
- VOM405 platform file.
- Some minor cleanup.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 15:07:52 2008 +0200
- ppc4xx: Cleanup VOM405 linker script
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
- Author: Matthias Fuchs <mf@esd.eu>
- Date: Tue Sep 2 15:07:51 2008 +0200
- ppc4xx: Add fdt support for VOM405 boards
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:36:14 2008 +0200
- ppc4xx: Coding style cleanup
- Wrap long lines etc.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:35:56 2008 +0200
- ppc4xx: Enable USB on PLU405 boards
- This patch enables the PCI-OHCI controller on PLU405 board.
- Also the default CPU frequency is updated to 266 MHz and
- command line editing is enabled.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:35:35 2008 +0200
- ppc4xx: Cleanup PLU405 platform file
- This patch
- - wraps some long lines
- - removes unused/obsolete functions: misc_init_f() and initdram()
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:35:04 2008 +0200
- ppc4xx: Cleanup PLU405 linker script
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:34:36 2008 +0200
- ppc4xx: Add fdt support for PLU405 boards
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:34:08 2008 +0200
- ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit be1b0d2777e179191a57b138b660547a17e55aad
- Author: Jochen Friedrich <jochen@scram.de>
- Date: Tue Sep 2 11:24:59 2008 +0200
- Don't tftp to unknown flash
- If a board has a variable number of flash banks, there are empty entries
- in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
- "Outside available Flash". This patch skips flash banks with unknown
- flash ids.
- Signed-off-by: Jochen Friedrich <jochen@scram.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 13:40:44 2008 +0900
- net: smc911x: Add pkt_data_pull and pkt_data_push function
- The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
- Byte-swapping is necessary, and so poor performance is inevitable.
- This problem cannot evade by the swap function of CHIP, this can
- evade by software Byte-swapping.
- And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
- functions necessary to solve this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 20:37:00 2008 -0700
- Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
- Affected boards:
- db64360
- db64460
- katmai
- taihu
- taishan
- yucca
- cpc45
- cpu87
- eXalion
- elppc
- debris
- kvme080
- mpc8315erdb
- integratorap
- ixdp425
- oxc
- pm826
- pm828
- pm854
- pm856
- ppmc7xx
- sc3
- sc520_spunk
- sorcery
- tqm8272
- tqm85xx
- utx8245
- Removed initialization of the driver from net/eth.c
- Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:45:44 2008 -0700
- Moved initialization of TULIP Ethernet controller to board_eth_init()
- Affected boards:
- cu824
- bab7xx
- adciop
- dasa_sim
- mousse
- mpc8540eval
- musenki
- mvblue
- pcippc2/pcippc6
- sbc8240
- stxssa
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:44:19 2008 -0700
- Moved initialization of E1000 Ethernet controller to board_eth_init()
- Affected boards:
- ap1000
- mvbc_p
- PM854
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:40:51 2008 -0700
- Moved initialization of plb2800 Ethernet driver to board_eth_init
- Affected boards:
- purple
- Removed initialization of controller from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:39:12 2008 -0700
- Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
- Modified board_eth_init() functions of boards that have this FEC in addition
- to other Ethernet controllers.
- Affected boards:
- bc3450
- icecube
- mvbc_p
- o2dnt
- pm520
- total5200
- tq5200
- Removed initialization of controller from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:36:38 2008 -0700
- Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
- Added a cpu_eth_init() function to MPC512x CPU directory and
- removed code from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 8218bd2aa68820b878a8413493ae17fd8d21f944
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:16:59 2008 -0700
- Moved initialization of IncaIP Ethernet controller to board_eth_init
- Affected boards:
- IncaIP
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:15:26 2008 -0700
- Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
- Affected boards:
- AmigaOneG3SE
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 6aca145e067efe75398e9fac97822bd3700de0b2
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:13:34 2008 -0700
- Moved initialization of GT6426x Ethernet controller to board_eth_init()
- Affected boards:
- EVB64260
- P3G4
- ZUMA
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit e3090534d62045dcb73f5392bacc64a4e8e443dc
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:08:43 2008 -0700
- Moved initialization of PCNET Ethernet controller to board_eth_init()
- Affected boards:
- PN62
- sc520_cdp
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:07:16 2008 -0700
- Moved initialization of NATSEMI Ethernet controller to board_eth_init()
- Affected boards:
- a3000
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:03:22 2008 -0700
- Moved initialization of NS8382X Ethernet controller to board_eth_init()
- Affected boards:
- bc3450
- cpci5200
- mecp5200
- pf2000
- icecube
- o2dnt
- pm520
- sandpoint8245
- total5200
- tqm5200
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 09:59:33 2008 -0700
- Moved initialization of TSI108 Ethernet controller to board_eth_init()
- Affected boards:
- mpc7448hpc2
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 0b252f50ae218ae15bfb63af44227972686ebc56
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 21:41:08 2008 -0700
- Moved initialization of RTL8139 Ethernet controller to board_eth_init()
- Affected boards:
- hidden_dragon
- MPC8544DS
- MPC8610HPCN
- R2DPLUS
- TB0229
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 09:49:42 2008 -0700
- Moved initialization of RTL8169 Ethernet controller to board_eth_init()
- Affected boards:
- linkstation
- r7780mp
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3ae071e44256144d6c1e3febb65f6c56bd433769
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Tue Aug 12 22:11:53 2008 -0700
- Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
- Removed at91sam9_eth_initialize() from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 22:22:04 2008 -0700
- Introduce netdev.h header file and remove externs
- This addresses all drivers whose initializers have already
- been moved to board_eth_init()/cpu_eth_init().
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:30 2008 -0500
- Add pixis_set_sgmii command
- The 8544DS and 8572DS platforms support an optional SGMII riser card to
- expose ethernet over an SGMII interface. Once the card is in, it is also
- necessary to configure the board such that it uses the card, rather than
- the on-board ethernet ports. This can either be done by flipping dip switches
- on the motherboard, or by modifying registers in the pixis. Either way
- requires a reboot.
- This adds a command to allow users to choose which ports are routed through
- the SGMII card, and which through the onboard ports. It also allows users
- to revert to the current switch settings.
- This code does not work on the 8572, as the PIXIS is different.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:29 2008 -0500
- Add SGMII support for the 8544 DS
- The 8544 DS has an optional SGMII Riser card, which uses different PHY
- addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
- setup code if so.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 652f7c2eef76a1340928bd660845441e932d86a2
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:28 2008 -0500
- Add support for Freescale SGMII Riser Card
- The 8544DS and 8572DS systems have an optional SGMII riser card which
- exposes new ethernet ports which are connected to the eTSECs via an
- SGMII interface. The SGMII PHYs for this board are offset from the standard
- PHY addresses, so this code modifies the passed in tsec_info structure to
- use the SGMII PHYs on the card, instead.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:27 2008 -0500
- Add SGMII support to the tsec
- Adds support for configuring the TBI to talk properly with the SerDes.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:26 2008 -0500
- Pass in tsec_info struct through tsec_initialize
- The tsec driver contains a hard-coded array of configuration information
- for the tsec ethernet controllers. We create a default function that works
- for most tsecs, and allow that to be overridden by board code. It creates
- an array of tsec_info structures, which are then parsed by the corresponding
- driver instance to determine configuration. Also, add regs, miiregs, and
- devname fields to the tsec_info structure, so that we don't need the kludgy
- "index" parameter.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:25 2008 -0500
- tsec: Move tsec.h to include/
- This is to prepare the way for board code passing in the tsec_info structure
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:52:44 2008 +0200
- PHY: Add support for the M88E1121R Marvell chip.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 2 21:17:36 2008 +0200
- fw_env.c: fix build problems with MTD_VERSION=old
- (as needed to support old 2.4 Linux kernel based releases)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 1 17:11:26 2008 +0200
- device: make device_register() clone the device
- This is expected by the callers, but this fact was hidden well within
- the old list implementation.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c75e772a2f061a508bba28ded1b5bea91f0442b0
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 23:28:15 2008 +0900
- sh: Remove CC line from board's Makefile
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 468eae0660de6fdfd9999944c536ecc4797bd944
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 23:25:57 2008 +0900
- sh: Replaced "@./mkconfig" for @$(MKCONFIG)
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 14:50:52 2008 +0900
- sh: Add support sh2 to MAKEALL
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6f3d8bb5faa12dbf3031382286784c978df038ee
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 14:52:23 2008 +0900
- sh: Fix compile error rsk7203 board
- This boards used old type preprocessor.
- This patch fix compile error.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 14:53:31 2008 +0900
- sh: Fix compile error sh7785lcr board
- This boards used old type preprocessor.
- This patch fix compile error.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6f0da4972e48f99d37bc522814940a6022cd3084
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Fri Aug 22 17:39:09 2008 +0900
- sh: Renesas Solutions AP325RXA board support
- AP325RXA is SH7723's reference board.
- This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
- In this patch, support SCIF, NOR Flash, and Ethernet.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit ab09f433b50bb83b5e440c335bc3839ee069e534
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Aug 22 17:48:51 2008 +0900
- sh: add support Renesas SH7723
- Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
- This patch supports CPU register's header file and SCIF serial driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c655fad06ba3fb042dbc667724a40e1a9a091248
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 23:02:04 2008 +0900
- sh: Renesas RSK+ 7203 board support
- This adds initial support for the RTE RSK+ SH7203 board.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Jul 3 23:11:02 2008 +0900
- sh: Add support Renesas SH7203 processor
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 22:48:33 2008 +0900
- sh: Add support SH2/SH2A which is CPU of Renesas Technology
- Add support SH2/SH2A basic function.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 22:45:08 2008 +0900
- sh: Renesas R0P7785LC0011RL board support
- This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
- Graphic, Ethernet, USB, SD, RTC, and I2C controller.
- This patch supports the following functions:
- - 128MB DDR2-SDRAM (29-bit address mode only)
- - NOR Flash
- - USB host
- - Ethernet
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Thu Jul 10 19:32:53 2008 +0900
- sh: add support for SH7785
- Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
- This patch supports CPU register's header file.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit d6e04258be8f2408845468d3cf722a4cf0433445
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 04:45:42 2008 +0200
- davinci: fix remaining dm644x_eth
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 04:24:56 2008 +0200
- fs: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 04:24:55 2008 +0200
- devices: merge to list_head
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ef0255fc75f28655f9681422079287d68a14dbaa
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 04:24:51 2008 +0200
- update linux/list
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 00:39:48 2008 +0200
- smdk6400: add gitignore
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 00:39:48 2008 +0200
- smdk6400: Use CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- smdk6400: remove redundant bootargs definition
- Double bootargs setting leads to a duplicated environmant entry.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 11edcfe260f20dcea79284a3e95270989d433854
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- ARM: Add support for S3C6400 based SMDK6400 board
- SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
- driver for it too. The board can also boot from the NOR flash, but due to
- hardware limitations it can only address 64KiB on it, which is not enough
- for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit e0056b341069796eaea11eae0fc8eb93a3dceaac
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- NAND: add NAND driver for S3C64XX
- Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 3fe7b589f9c7463df39056f8872006a67f56a91c
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- S3C64XX: remove broken HWFLOW support from the serial driver
- As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
- broken and currently unused. Remove it.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- serial: add S3C64XX serial driver
- Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:46 2008 +0200
- USB: Add support for OHCI controller on S3C6400
- Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
- try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
- it should work too and we could still profit from instruction cache.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 9b07773f8883665b002500c190507e9fd99b7181
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:46 2008 +0200
- ARM: Add arm1176 core with S3C6400 SoC
- Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
- Author: Sandeep Paulraj <s-paulraj@ti.com>
- Date: Sun Aug 31 00:39:46 2008 +0200
- ARM DaVinci: Changing function names for EMAC driver
- DM644x is just one of a series of DaVinci chips that use the EMAC driver.
- By replacing all the function names that start with dm644x_* to davinci_*
- we make these function more portable. I have tested this change on my EVM.
- DM6467 is another DaVinci SOC which uses the EMAC driver and i will
- be sending patches that add DaVinci DM6467 support to the list soon.
- Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
- commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Sat Aug 30 23:21:30 2008 +0200
- Integrator[AP/CP] - Remove unused file memsetup.S
- - memsetup.s is changed/merged to lowlevel_init.S
- memsetup.S has a global label memsetup that just returns back to caller
- - memsetup global label is changed/merged to lowlevel_init
- This label is not called from anywhere.
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit 89d51d022a63be1a851eda983c8cbce1a044f65f
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Wed Aug 27 21:35:52 2008 +0200
- ARM DaVinci: Standardize names of directories/files
- ARM DaVinci: Standardize names of directories/files.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Jul 11 15:10:13 2008 -0400
- ARM DaVinci: Move common functions to board/davinci/common
- ARM DaVinci: Move common functions to board/davinci/common.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit c2b4b2e4814f4ace9015fdb64132894327400bf0
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 29 11:56:49 2008 +0200
- ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
- This function is needed for the new NAND infrastructure. We only need
- a dummy implementation though for the NDFC.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 29 12:06:27 2008 +0200
- ppc4xx: Increase image size for NAND boot target
- This is needed since now with HUSH enabled (amcc-common.h) the image
- read from NAND exceeds the previous limit.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Thu Aug 28 23:58:30 2008 -0700
- Move MPC512x_FEC driver to drivers/net
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 80b00af01b3c9154774de2936f05a051e92f6a03
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Thu Aug 28 23:58:29 2008 -0700
- Move MPC5xxx_FEC driver to drivers/net
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 21:53:57 2008 +0200
- cmd_terminal: remove no need ifdef
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 578118bdf122877ae769776be002255be447b4fa
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 21:53:57 2008 +0200
- common/Makefile: order by functionality
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 21:53:56 2008 +0200
- miiphyutil: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 81789c39db3f0f6b621df8c0ec66014d701f368e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 21:53:37 2008 +0200
- autoscript: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 01:18:11 2008 +0200
- crc16: move to lib_generic
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 55195773eacefb22dd483a3c560ea30a14263ce1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 01:18:01 2008 +0200
- miiphybb: move to drivers/net/phy
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e8314035996a9118ac5948df2ff8a2f2161ed67a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Aug 28 12:31:51 2008 +0200
- soft_spi: move to drivers/spi
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Aug 28 12:31:51 2008 +0200
- soft_i2c: move to drivers/i2c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 717a222229fdb77703e9174d0eb08a4b41febf49
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Aug 28 12:31:48 2008 +0200
- gunzip: move to lib_generic
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 52aef8f9ba28b747973bf76741c23db658d5773c
- Author: Wolfgang Ocker <weo@reccoware.de>
- Date: Tue Aug 26 19:55:23 2008 +0200
- ppc4xx: NAND configuration
- Made NAND bank configuration setting a config variable.
- Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5bc542a593abc9e974fbd34704af85c37c366c60
- Author: Victor Gallardo <vgallardo@amcc.com>
- Date: Thu Aug 28 16:03:28 2008 -0700
- ppc4xx: fix UIC external_interrupt hang on UIC0
- This patch fixes a UIC external_interrupt hang if critical or non-critical
- interrupt is set at the same time as a normal interrupt is set on UIC0.
- Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
- Author: Prodyut Hazarika <phazarika@amcc.com>
- Date: Wed Aug 27 16:39:00 2008 -0700
- ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
- Removed Magic numbers from Initialization preload registers
- Tested with Kilauea, Glacier, Canyonlands and Katmai boards
- About 5-7% improvement seen for LMBench memtests
- Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8a490422bed685c9491274ec997f62061d88620b
- Author: John Rigby <jrigby@freescale.com>
- Date: Thu Aug 28 13:17:07 2008 -0600
- ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
- MPC5121 rev 2 silicon has a new register for controlling how long
- CS is asserted after deassertion of ALE in multiplexed mode.
- The default is to assert CS together with ALE. The alternative
- is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
- The default is wrong for the NOR flash and CPLD on the ADS5121.
- This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
- it does so conditionally based on silicon rev 2.0 or greater.
- Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit 5d9a5efa4b332f442b54a755d49969123c3a8742
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 00:56:46 2008 +0600
- Add I2C frequency dividers for ColdFire
- The existing I2C freqency dividers for FDR does not apply
- to ColdFire platforms; thus, a seperate table is added
- based on MCF5xxx Reference Manual
- Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: Tabi Timur <timur@freescale.com>
- commit eec567a67e00d1ed8d941e9098b7d421f4091abf
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 03:01:19 2008 +0600
- ColdFire: I2C fix for multiple platforms
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit d53cf6a9c7423cba668b867978648645f71c3090
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 00:37:13 2008 +0600
- ColdFire: Add CONFIG_MII_INIT for M5272C3
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit f78ced3028d4130b24a318943a70cf5584ab16f4
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 00:26:25 2008 +0600
- ColdFire: Multiple fixes for MCF5445x platforms
- Add FEC pin set and mii reset in __mii_init(). Change
- legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
- change cfi_offset to 0, and change CFG_FLASH_CFI to
- CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
- M54455EVB env settings in configuration file.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Fri Aug 15 18:24:25 2008 +0000
- ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
- The user manuals recommend 7.
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Fri Aug 15 16:50:07 2008 +0000
- ColdFire: Raise uart baudrate to 115200 bps
- M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
- uart baudrate increase from 19200 to 115200 bps
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit ab6ba842682552ccf071d0034da0a20633d1d1ac
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 13 12:07:03 2008 +0000
- ColdFire: Fix board.c warning message
- Implicit declaration of nand_init() warning message
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 27 01:10:34 2008 -0500
- FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Aug 21 20:44:49 2008 +0200
- mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 19 14:46:36 2008 -0500
- mpc85xx: remove redudant code with lib_ppc/interrupts.c
- For some reason we duplicated the majority of code in lib_ppc/interrupts.c
- not show how that happened, but there is no good reason for it.
- Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
- they exist.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Jul 25 13:31:05 2008 -0500
- mpc85xx: Add support for the MPC8536DS reference board
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- Signed-off-by: Dejan Minic <minic@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 12 11:14:19 2008 -0500
- mpc85xx: Add support for the MPC8536
- The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
- also have SERDES init code for the 8536.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- Signed-off-by: Dejan Minic <minic@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 12 11:13:08 2008 -0500
- mpc85xx: Add support for the MPC8572DS reference board
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 457caecdbca3df21a93abff19eab12dbc61b7897
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 27 01:05:35 2008 -0500
- FSL DDR: Remove old SPD support from cpu/mpc85xx
- All 85xx boards have been converted to the new code so we can
- remove the old SPD DDR setup code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0e7927db138976469e7257e29c1338050a50fcd9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 27 01:04:07 2008 -0500
- FSL DDR: Convert STXSSA to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c360d9b970fbb9c13744c355879671165bbb9b9e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 27 01:03:42 2008 -0500
- FSL DDR: Convert STXGP3 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8e55313b7ae12352a343f9b9962e662dbd897187
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:52:58 2008 -0500
- FSL DDR: Convert SBC8560 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:52:32 2008 -0500
- FSL DDR: Convert MPC8540EVAL to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:52:07 2008 -0500
- FSL DDR: Convert PM856 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d53bd3e17bd4f460257c19255569ea6dcfaae817
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:51:49 2008 -0500
- FSL DDR: Convert PM854 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 33b9079ba20926f14238fff863b68a98e938948e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:15:28 2008 -0500
- FSL DDR: Convert sbc8548 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:14:14 2008 -0500
- FSL DDR: Convert atum8548 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit be0bd8234b9777ecd63c4c686f72af070d886517
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 22:56:56 2008 -0500
- FSL DDR: Convert socrates to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 08:02:30 2008 -0500
- FSL DDR: Convert MPC8544DS to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 18 13:51:05 2008 -0500
- FSL DDR: Convert MPC8568MDS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 18 13:51:06 2008 -0500
- FSL DDR: Convert MPC8548CDS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit aa11d85cf318b961e029fe50d68ca47d004bce93
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Mar 17 15:48:18 2008 -0500
- FSL DDR: Convert MPC8541CDS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2b40edb10d81da7bba724edbccd7f53777112579
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 18 11:12:42 2008 -0500
- FSL DDR: Convert MPC8555ADS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 18 11:12:44 2008 -0500
- FSL DDR: Convert MPC8560ADS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Jun 6 13:12:18 2008 -0500
- FSL DDR: Convert MPC8540ADS to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 21:34:55 2008 -0500
- FSL DDR: Add 85xx specific register setting
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 6fb1b7346849ccd0c20306143e334f5b76143070
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jun 9 11:07:46 2008 -0500
- FSL DDR: Add e500 TLB helper for DDR code
- Provide a helper function that board code can call to map TLBs when
- setting up DDR.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d26b739afe5a6760bd345743188759cd9d0f3b47
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Tue Aug 26 17:03:38 2008 -0500
- dm9000 remove dead external phy support, gpio fix
- dm9000 has code to detect and initialize external phy parts, but later
- on in the code the part is forced to use the internal phy
- unconditionally. Remove the unused/untested code.
- change the GPIO initialization so that only the GPIO used as an
- internal phy reset (hardwired in the chip) is set as an output. The
- remaining GPIO need to be handled by board specific code to prevent
- possible drive conflicts. Set as inputs for safety.
- replace a few magic numbers with defines
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Tue Aug 26 11:17:48 2008 -0500
- Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
- cmd_net.c command descriptions were updated to describe the optional
- hostIPaddr argument. The dhcp command help message was also updated
- to more closely reflect the other commands in cmd_net.c
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Aug 20 11:30:28 2008 +0200
- Fix bogus error message in the DHCP handler
- The DHCP handler has 1 state that is not listed in this case, causing a
- failure message when there is actually no failure.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Aug 20 11:30:27 2008 +0200
- Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
- The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
- missing extern inside the net/bootp.h header
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 1803f7f91ff35ca402259065df7557107dcf28a2
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 21:26:32 2008 +0000
- ColdFire: Add FEC Buffer descriptors in SRAM
- Add FEC Buffer descriptors and data buffer in SRAM for
- faster execution and access.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 429be27ce195210d4b9decf9e867b9ca6155a87d
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 21 23:55:11 2008 +0000
- Fix ColdFire FEC warning messages
- Types mismatch and implicit declaration of icache_invalid()
- warning messages
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 6a002171098e968bd5b362347d2831224fab6048
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sat Jul 12 00:17:50 2008 -0700
- Moved initialization of SKGE Ethernet driver to board code.
- The only board using this driver is the SL8245 board.
- Removed initialization for the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sat Jul 12 00:08:45 2008 -0700
- Moved conditional compilation to Makefile for SK98 Ethernet driver
- Brute-force removal of #ifdefs. Didn't touch the code.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 65d3d99c28dc363d15eaee78225ff643df499b97
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Fri Jul 11 23:42:19 2008 -0700
- Moved initialization of ULI526X Ethernet driver to board code.
- The only board using this driver is the Freescale MPC8610HPCD board.
- Removed initialization for the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Fri Jul 11 23:15:28 2008 -0700
- Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
- Added board_eth_init() function to bf537-stamp board.
- Removed initialization for the Blackin EMAC driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fc363ce35408f348cacced68505f3747a53e3d7c
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Wed Jul 9 01:04:19 2008 -0700
- Moved initialization of GRETH Ethernet driver to CPU directory
- Added a cpu_eth_init() function to leon2/leon3 CPU directories and
- removed code from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Tue Aug 26 22:16:25 2008 -0700
- Moved initialization of MCFFEC Ethernet driver to CPU directory
- Added a cpu_eth_init() function to coldfire CPU directories and
- removed code from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Tue Aug 26 22:12:36 2008 -0700
- Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
- Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
- removed code from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:38 2008 -0500
- FSL DDR: Remove old SPD support from cpu/mpc86xx
- All 86xx boards have been converted to the new code so we can
- remove the old SPD DDR setup code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9bd4e5911b750837515466bc7449087698b88e0e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:37 2008 -0500
- FSL DDR: Convert SBC8641D to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 26 15:01:36 2008 -0500
- FSL DDR: Convert MPC8610HPCD to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:35 2008 -0500
- FSL DDR: Convert MPC8641HPCN to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:34 2008 -0500
- FSL DDR: Add 86xx specific register setting
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 233fdd502a6c227f476212b3097653ad48d7e254
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:32 2008 -0500
- FSL DDR: Add DDR2 DIMM paramter support
- Compute DIMM parameters based upon the SPD information.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 05c05a2363a6ac11e0e405926034546ffad71fad
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:30 2008 -0500
- FSL DDR: Add DDR1 DIMM paramter support
- Compute DIMM parameters based upon the SPD information in spd.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:29 2008 -0500
- FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
- The main purpose of this rewrite it to be able to share the same
- initialization code on all FSL PowerPC products that have DDR
- controllers. (83xx, 85xx, 86xx).
- The code is broken up into the following steps:
- GET_SPD
- COMPUTE_DIMM_PARMS
- COMPUTE_COMMON_PARMS
- GATHER_OPTS
- ASSIGN_ADDRESSES
- COMPUTE_REGS
- PROGRAM_REGS
- This allows us to share more code an easily allow for board specific code
- overrides.
- Additionally this code base adds support for >4G of DDR and provides a
- foundation for supporting interleaving on processors with more than one
- controller.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f784e32b4bce0013983506b11af4b85b8ca3d36e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:28 2008 -0500
- FSL DDR: Provide a generic set_ddr_laws()
- Provide a helper function that will setup the last available
- LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
- Author: James Yang <James.Yang@freescale.com>
- Date: Tue Aug 26 15:01:27 2008 -0500
- Add proper SPD definitions for DDR1/2/3
- Also adds helper functions for DDR1/2 to verify the checksum.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 285db74716c724ae8a0ff177878fd09a74428c7b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Aug 27 01:02:48 2008 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
- Author: Heiko Schocher <hs@denx.de>
- Date: Tue Aug 19 10:08:49 2008 +0200
- Add support for muas3001 board (MPC8270)
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 322098bff32410d2a00031649b47c4ec90a66d9a
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Tue Aug 19 08:31:18 2008 +0530
- common/cmd_load.c cleanup - remove unused variables
- - Remove unused global variable os_data_count.
- - Remove unused variable z.
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit 306620b762a4f9fa6678568ad2e8772dec145208
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Mon Aug 18 13:35:27 2008 +0200
- remove MVS1 board
- MVS1 board has reached end-of-life and can be removed completely.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:45 2008 -0500
- bootm: refactor do_reset and os boot function args
- There is no need for each OS specific function to call do_reset() we
- can just do it once in bootm. This means its feasible on an error for
- the OS boot function to return.
- Also, remove passing in cmd_tbl_t as its not needed by the OS boot
- functions. flag isn't currently used but might be in the future so
- we left it alone.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 40afac22a9c602e55c501c800f1c064324711b56
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:44 2008 -0500
- fdt: Added resize command
- Resize the fdt to size + padding to 4k boundary
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:43 2008 -0500
- fdt: refactor initrd related code
- Created a new fdt_initrd() to deal with setting the initrd properties
- in the device tree and fixing up the mem reserve. We can use this
- both in the choosen node handling and lets us remove some duplicated
- code when we fixup the initrd info in bootm on PPC.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:42 2008 -0500
- fdt: refactor fdt resize code
- Move the fdt resizing code out of ppc specific boot code and into
- common fdt support code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:41 2008 -0500
- bootm: refactor image detection and os load steps
- Created a bootm_start() that handles the parsing and detection of all
- the images that will be used by the bootm command (OS, ramdisk, fdt).
- As part of this we now tract all the relevant image offsets in the
- bootm_headers_t struct. This will allow us to have all the needed
- state for future sub-commands and lets us reduce a bit of arch
- specific code on SPARC.
- Created a bootm_load_os() that deals with decompression and loading
- the OS image.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:40 2008 -0500
- bootm: move lmb into the bootm_headers_t structure
- To allow for persistent state between future bootm subcommands we
- need the lmb to exist in a global state.
- Moving it into the bootm_headers_t allows us to do that.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 54f9c86691309b2f919f567f9255b8bcad2c7651
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:39 2008 -0500
- bootm: Set working fdt address as part of the bootm flow
- Set the fdt working address so "fdt FOO" commands can be used as part
- of the bootm flow. Also set an the environment variable "fdtaddr"
- with the value.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 06a09918f3903450313e2047a9cc258bf5872f46
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:38 2008 -0500
- bootm: refactor fdt locating and relocation code
- Move the code that handles finding a device tree blob and relocating
- it (if needed) into common code so all arch's have access to it.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:37 2008 -0500
- bootm: refactor ramdisk locating code
- Move determing if we have a ramdisk and where its located into the
- common code. Keep track of the ramdisk start and end in the
- bootm_headers_t image struct.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c160a9544743e80e8889edb2275538e7764ce334
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:36 2008 -0500
- bootm: refactor entry point code
- Move entry point code out of each arch and into common code.
- Keep the entry point in the bootm_headers_t images struct.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 20220d22b9f41446288588cd2e457e0077a18bed
- Author: Randy Vinson <rvinson@mvista.com>
- Date: Wed Aug 13 11:44:57 2008 -0700
- mpc7448hpc2: Fix PCI I/O space mapping.
- PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
- PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
- space such that 0xFA000000 in the processor's address space maps to 0
- on the PCI I/O bus.
- Signed-off-by Randy Vinson <rvinson@mvista.com>
- Acked-by: Roy Zang <tie-fei.zang@freescale.com>
- commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Wed Aug 13 18:10:26 2008 +0200
- i.MX31: Specify maintainers for i.MX31-based boards
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 26 15:01:28 2008 +0200
- ADS5121: adjust image addresses in RAM and flash
- Use the same mapping in flash as used by Linux
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 19f101412c16edee9fd55db4039e1d68a833b28b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 26 13:14:34 2008 +0200
- cmd_mem.c: Fix help message alignment
- Bug was introced by "Big white-space cleanup" (53677ef1)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Wed Aug 20 11:11:52 2008 +0200
- change mvBL-M7 default env and move to vendor subdir
- fix mvBL-M7 config and move to matrix_vision subdir
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Fri Aug 22 23:52:40 2008 -0700
- MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
- This patch adds elements to the 83xx sysconf structure and #define values that are used
- by mpc83xx family devices.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
- Author: Ira W. Snyder <iws@ovro.caltech.edu>
- Date: Fri Aug 22 11:00:15 2008 -0700
- MPC8349EMDS: Add PCI Agent (PCISLAVE) support
- Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
- PCI card rather than a host computer.
- Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 4ff9aea9d6b5602683a920951ef896996438af62
- Author: Ira W. Snyder <iws@ovro.caltech.edu>
- Date: Fri Aug 22 11:00:14 2008 -0700
- mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
- This adds a helper function to unlock the PCI configuration bit, so that
- any extra PCI setup (such as outbound windows, etc.) can be done after
- using the 83XX_GENERIC_PCI code to set up the PCI bus.
- Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 162338e1fcde231ca4d562e5ebd7859456731691
- Author: Ira W. Snyder <iws@ovro.caltech.edu>
- Date: Fri Aug 22 11:00:13 2008 -0700
- MPC8349EMDS: use 83XX_GENERIC_PCI setup code
- Change the MPC8349EMDS board to use the generic PCI initialization code
- for the mpc83xx cpu.
- Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Aug 25 14:53:09 2008 -0500
- fix out of tree building
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a49d10cf027d059ee15c262010a05cdaec0961e1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 25 23:45:41 2008 +0200
- Minor coding style cleanup, updte CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 20 20:29:38 2008 +0200
- RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
- This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
- to combine both config options into one line. This even allows defining
- both options and not generating the target object twice.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 079edb913dbae147b50a488cf02e03f473fc5f28
- Author: Jens Gehrlein <sew_s@tqs.de>
- Date: Fri Jul 4 16:50:05 2008 +0200
- MX31: fix bit masks in function mx31_decode_pll()
- Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
- Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
- commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Mon Aug 25 11:11:34 2008 +0200
- Correct ARM Versatile Timer Initialization
- - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
- -- Timer Value Register @ TIMER Base + 4 is Read-only.
- -- Prescale Value (Bits 3-2 of TIMER Control register)
- can only be one of 00,01,10. 11 is undefined.
- -- CFG_HZ for Versatile board is set to
- #define CFG_HZ (1000000 / 256)
- So Prescale bits is set to indicate
- - 8 Stages of Prescale, Clock divided by 256
- - The Timer Control Register has one Undefined/Shouldn't Use Bit
- So we should do read/modify/write Operation
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Mon Aug 25 11:30:29 2008 +0200
- Add ARM AMBA PL031 RTC Support
- Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- commit e39411674669cc880e1ec4a8ca4794fb15c33a45
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Aug 19 16:21:03 2008 -0400
- ARM DaVinci: Removed redundant NAND initialization code.
- ARM DaVinci: Removed redundant NAND initialization code.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit b3fb663b20d995ca41327db877ddb168279b3f62
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Aug 19 16:21:00 2008 -0400
- ARM DaVinci: Fix compilation error with new MTD code.
- ARM DaVinci: Fix compilation error with new MTD code.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Aug 22 14:37:05 2008 -0400
- Add note on dereferencing /aliases pointers
- Replace the "must quote special characters" note with a hint on
- how to dereference /aliases pointers by omitting the leading "/".
- This feature was introduced by Kumar Gala as a libfdt enhancement
- in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
- Example:
- => fdt print /aliases
- aliases {
- ethernet0 = "/qe@e0100000/ucc@2000";
- ethernet1 = "/qe@e0100000/ucc@3000";
- serial0 = "/soc8360@e0000000/serial@4500";
- serial1 = "/soc8360@e0000000/serial@4600";
- pci0 = "/pci@e0008500";
- };
- => fdt print ethernet0
- ucc@2000 {
- device_type = "network";
- compatible = "ucc_geth";
- cell-index = <0x1>;
- reg = <0x2000 0x200>;
- interrupts = <0x20>;
- interrupt-parent = <0x2>;
- local-mac-address = [00 00 00 00 00 00];
- rx-clock-name = "none";
- tx-clock-name = "clk9";
- phy-handle = <0x3>;
- phy-connection-type = "rgmii-id";
- pio-handle = <0x4>;
- };
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit feeca3f578b7f53c032ba203698751c982f8bf5a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 14 08:28:19 2008 -0500
- libfdt: Add support for using aliases in fdt_path_offset()
- If the path doesn't start with '/' check to see if it matches some alias
- under "/aliases" and substitute the matching alias value in the path
- and retry the lookup.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: David Gibson <david@gibson.dropbear.id.au>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Wed Aug 6 14:50:49 2008 +1000
- libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
- As well as fdt_subnode_offset(), libfdt includes an
- fdt_subnode_offset_namelen() function that takes the subnode name to
- look up not as a NUL-terminated string, but as a string with an
- explicit length. This can be useful when the caller has the name as
- part of a longer string, such as a full path.
- However, we don't have corresponding 'namelen' versions for
- fdt_get_property() and fdt_getprop(). There are less obvious use
- cases for these variants on property names, but there are
- circumstances where they can be useful e.g. looking up property names
- which need to be parsed from a longer string buffer such as user input
- or a configuration file, or looking up an alias in a path with
- IEEE1275 style aliases.
- So, since it's very easy to implement such variants, this patch does
- so. The original NUL-terminated variants are, of course, implemented
- in terms of the namelen versions.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit f171746f701ea58bf6a53e835b53d2aaebee0d81
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Tue Jul 29 14:51:22 2008 +1000
- libfdt: Forgot one function when cleaning the namespace
- In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
- libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
- chance of collisions with things from whatever package libfdt is
- embedded in, pulled into the libfdt build via that environment's
- libfdt_env.h.
- Except... I missed one. This patch applies the same treatment to
- _stringlist_contains(). While we're at it, also make it static since
- it's only used in the same file.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 46390da15411351fc3b498bd8c1615f78fe80df0
- Author: Wolfram Sang <w.sang@pengutronix.de>
- Date: Wed Jul 9 11:22:44 2008 +0200
- libfdt: Improve documentation in libfdt.h
- Fix a few typos and mistakes.
- Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
- Acked-by: David Gibson <david@gibson.dropbear.id.au>
- commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Wed Jul 9 14:10:24 2008 +1000
- libfdt: Increase namespace-pollution paranoia
- libfdt is supposed to easy to embed in projects all and sundry.
- Often, it won't be practical to separate the embedded libfdt's
- namespace from that of the surrounding project. Which means there can
- be namespace conflicts between even libfdt's internal/static functions
- and functions or macros coming from the surrounding project's headers
- via libfdt_env.h.
- This patch, therefore, renames a bunch of libfdt internal functions
- and macros and makes a few other chances to reduce the chances of
- namespace collisions with embedding projects. Specifically:
- - Internal functions (even static ones) are now named _fdt_*()
- - The type and (static) global for the error table in
- fdt_strerror() gain an fdt_ prefix
- - The unused macro PALIGN is removed
- - The memeq and streq macros are removed and open-coded in the
- users (they were only used once each)
- - Other macros gain an FDT_ prefix
- - To save some of the bulk from the previous change, an
- FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
- FDT_ALIGN(x, FDT_TAGSIZE)
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit c66830263af19831f2b7db307f79d1943febf7f9
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Jul 7 10:14:15 2008 +1000
- dtc: Enable and fix -Wcast-qual warnings
- Enabling -Wcast-qual warnings in dtc shows up a number of places where
- we are incorrectly discarding a const qualification. There are also
- some places where we are intentionally discarding the 'const', and we
- need an ugly cast through uintptr_t to suppress the warning. However,
- most of these are pretty well isolated with the *_w() functions. So
- in the interests of maximum safety with const qualifications, this
- patch enables the warnings and fixes the existing complaints.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Jul 7 10:10:48 2008 +1000
- dtc: Enable and fix -Wpointer-arith warnings
- This patch turns on the -Wpointer-arith option in the dtc Makefile,
- and fixes the resulting warnings due to using (void *) in pointer
- arithmetic. While convenient, pointer arithmetic on void * is not
- portable, so it's better that we avoid it, particularly in libfdt.
- Also add necessary definition of uintptr_t needed by David Gibson's
- changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
- comes from stdint.h, which u-boot doesn't have). -- gvb
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
- Author: Tirumala R Marri <tmarri@amcc.com>
- Date: Thu Aug 21 21:54:53 2008 -0700
- ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
- During recent PCI-E tests it has been found that current
- driverl level and de-emphasis values are not set correctly.
- After sweeping throgh all de-ephasis values, it was found that
- 0x130 is a right value. Where 0x13 is driver level and 0 is
- de-emphasis.
- Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Aug 20 20:46:56 2008 +0200
- Make the YAFFS filesystem work
- Recently the YAFFS filesystem support has been added to U-boot.
- However, just enabling CONFIG_YAFFS2 is not enough to get it working.
- ymount will generate an exception (when dereferencing mtd->readoob()), because
- the genericDevice is a null pointer. Further, a lot of logging is produced
- while using YAFFS fs, so logging should also be disabled.
- Both issues are solved by this patch.
- With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
- in U-boot, as well as in Linux.
- Tested on a Atmel AT91SAM9261EK board.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Acked-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Aug 19 08:42:53 2008 +0900
- Fix OneNAND read_oob/write_oob functions compatability
- Also sync with kernel OneNAND codes
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 8d765456c1d33f2010d2717ee58de7647fdc6346
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Aug 18 17:11:20 2008 -0500
- NAND: Remove delay from nand_boot_fsl_elbc.c.
- It was for debugging purposes, and shouldn't have been left in.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit f556483734126793522fb7a8cf36af90da78f084
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 21 11:05:03 2008 +0200
- ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
- This patch fixes some minor issues introduced with the patch:
- ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
- - Rework memory-queue and PLB arbiter optimization code, that the
- local variable is not needed anymore. This removes one #ifdef.
- - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
- of XXX+ 0x01). This was not introduced by Prodyut, just a
- copy-paste problem.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 079589bcfb24ba11068460276a3cc9549ab5346f
- Author: Prodyut Hazarika <phazarika@amcc.com>
- Date: Wed Aug 20 09:38:51 2008 -0700
- ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
- PPC405EX and PPC460EX/GT/SX
- - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
- processors
- - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
- across processors (405 and 440/460)
- - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
- processors
- - Add register bit definitions for Memory Queue Configuration registers
- Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ba37aa03287c5483c61c0a3e320c8888bee0143a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 19 15:41:18 2008 -0500
- fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
- Move to using the environment variables 'ethaddr', 'eth1addr', etc..
- instead of bd->bi_enetaddr, bi_enet1addr, etc.
- This makes the code a bit more flexible to the number of ethernet
- interfaces.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4cacf7c64609839f809e2f9c45873f1d65861703
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 19 14:57:55 2008 +0200
- hush: Fix printf debug macro in hush.c so that it usable in U-Boot
- This patch changes the debug_printf() marco for U-Boot in hush.c and
- moves the definition of DEBUG_SHELL to a place that is actually compiled
- under U-Boot.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
- Author: Heiko Schocher <hs@denx.de>
- Date: Tue Aug 19 09:57:41 2008 +0200
- cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
- Commit 00b1883a4cac59d97cd297b1a3a398db85982865
- missed a few boards:
- include/configs/M5253DEMO.h
- include/configs/ml507.h
- include/configs/redwood.h
- This patch fixes this.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 0768b7a872964085eece8d5e9fec9175e9deb161
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Mon Aug 18 13:41:27 2008 +0200
- Consolidate strmhz() implementation
- ARM, i386, m68k and ppc all have identical implementations of strmhz().
- Other architectures don't provide this function at all.
- This patch moves strmhz() into lib_generic, reducing code duplication
- and providing a more unified API across architectures.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a928d0df211f1d829308d335d19be3ca42558dfc
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Mon Aug 18 12:02:51 2008 +0200
- fix mvbc_p board build warnings
- fix build warnings @ mvBC-P board by using correct types, i.e. change
- out_be32 to out_be16 and out_8 accordingly.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 16 18:54:27 2008 +0200
- Makefile: fix posix support on find
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit bef92e215d945cc574399c1a1b00a3a76d35aa03
- Author: Axel Beierlein <belatronix@web.de>
- Date: Sat Aug 16 00:30:48 2008 +0200
- Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
- Tested with TQM5200S on STK52XX.200 Board
- Signed-off-by: Axel Beierlein <belatronix@web.de>
- commit 0800707b6d5041a840a65d556032c15c584b55f8
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Fri Aug 15 14:36:32 2008 -0500
- mod_i2c_mem() bugfix
- The last used chip, address, and address length were not being
- stored for the imm and imn commands.
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit 4afbef967275b2f636abae86f91b81becee7ad03
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Fri Aug 15 15:37:31 2008 -0400
- Fix typo in spelling of ATAPI.
- Correct a small spelling mistake.
- Signed-off-by: Steven A. Falco <sfalco@harris.com>
- commit 36c2d3062ecc6ab85f8e237180eb134464c48418
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Fri Aug 15 15:34:10 2008 -0400
- Add a hook to allow board-specific PIO mode setting.
- This patch adds a hook whereby a board-specific routine can be called to
- configure hardware for a PIO mode. The prototype for the board-specific
- routine is:
- int inline ide_set_piomode(int pio_mode)
- ide_set_piomode should be prepared to configure hardware for a pio_mode
- between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
- Signed-off-by: Steven A. Falco <sfalco@harris.com>
- commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Fri Aug 15 15:29:12 2008 -0400
- Replace enums in ata.h with an include of libata.h
- This patch removes some enums from ata.h and replaces them with an
- include of libata.h. This way, we eliminate duplicated code, and
- prevent errors whereby the different versions could be out of sync.
- Signed-off-by: Steven A. Falco <sfalco@harris.com>
- commit 0de0afbca865ecf482b4d2b635236746def8518f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 15 18:32:41 2008 +0200
- coldfire: fix CFI drivers activation with new macro
- rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:35 2008 -0500
- fdt: fdt addr w/o any args reports back the current working address
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f953d99fd528a496b400a706b511eaf8e3ea66af
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:34 2008 -0500
- fdt: added the ability to set initrd start/end via chosen command
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ffa4bafacaef67058463b3d7d0099ced57569dd2
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:33 2008 -0500
- Add command to enable/disable interrupts
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Tue Aug 19 22:21:16 2008 -0700
- CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
- This patch fixes a missing vendor code in the flash_real_protect() function.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 16:53:39 2008 +0000
- CFI: Fix AMD Legacy sector protect
- New implement sector lock and unlock or softlock commands
- do not exist in AMD legacy flash. Thus, causing issue
- when erasing AMD legacy flash (such as lv040)
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 492671404140f09d5b21b3d2ce4e362c0692c069
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Aug 20 09:40:16 2008 +0200
- hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
- CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 33eac2b3d946fc998a09245dfe54d017079b9056
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Aug 20 09:28:36 2008 +0200
- hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 25da0b84195fdda89a943b2d25757db5afeef5b8
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Aug 20 09:27:37 2008 +0200
- favr-32-ezkit: Fix printf format warnings
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri Aug 15 12:04:25 2008 +0200
- MAINTAINERS: Sort avr32 section alphabetically
- The rest of the MAINTAINERS file appears to be sorted
- almost-alphabetically, but entries for the newly added AVR32 boards were
- added somewhat randomly. This patch sorts the list alphabetically again.
- Also update my e-mail address. The old one still works, but it may not
- work forever.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 13b50fe3bc065c48911fa373231421280855a9d6
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Wed Jul 30 13:07:27 2008 +0100
- avr32: Add MIMC200 board
- The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
- 8MByte FLASH and 128KByte FRAM.
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Wed Jul 9 21:07:34 2008 +0900
- rtl8169: add support for RTL8110SCL
- This patch fixes a problem that RTL8110SCL started transfer
- with an incorrect memory address.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 25 15:48:52 2008 -0500
- Fix dm9000 receive status and len little endian issue
- The received status and len was in little endian
- format and caused the ethernet unable to proceed
- further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fcd69a1a57fb2af4d26201422095a4be9f36963e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:32 2008 -0500
- Clean up usage of icache_disable/dcache_disable
- There is no point in disabling the icache on 7xx/74xx/86xx parts and not
- also flushing the icache. All callers of invalidate_l1_instruction_cache()
- call icache_disable() right after. Make it so icache_disable() calls
- invalidate_l1_instruction_cache() for us.
- Also, dcache_disable() already calls dcache_flush() so there is no point
- in the explicit calls of dcache_flush().
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:31 2008 -0500
- Update linux bootm to support ePAPR client interface
- The ePAPR spec has some subtle differences from the current device
- tree based boot interface to the powerpc linux kernel. The powerpc
- linux kernel currently ignores the differences that ePAPR specifies.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b734e5556a239b3be5f9693b2f4b4b739683ec16
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 18 23:50:20 2008 +0200
- Minor code cleanup: keep lists sorted.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d0039d4ed275e6ca09fb417895024ad02be118c4
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Jul 23 19:10:14 2008 +0200
- Add support for ADT7460 I2C monitor chip
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Jul 14 19:45:45 2008 +0200
- video: Clean drivers/video/Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 871c18dd301752270e1f74328c846c3104be1e2e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Jul 14 19:45:37 2008 +0200
- rtc: Clean drivers/rtc/Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Jul 14 19:45:35 2008 +0200
- i2c: Clean drivers/i2c/ Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Jul 9 22:30:30 2008 +0800
- Add 'license' command to U-Boot command line
- The 'license' command includes the U-Boot license (GPLv2) into the
- actual bootloader binary. The license text can be shown interactively
- at the U-Boot commandline.
- For products where the commandline can actually be accessed by the
- end user, this helps to prevent inadvertent GPL violations, since the
- GPLv2 license text can no longer be 'forgotten' to be included into
- the product.
- The 'license' command can be enabled by CONFIG_CMD_LICENSE.
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit fe2ce5500ebf43d79d227190bd2370232d5b113d
- Author: Harald Welte <laforge@gnumonks.org>
- Date: Sun Jul 6 15:56:38 2008 +0800
- add 'unzip' command to u-boot commandline
- [PATCH] add new 'unzip' command to u-boot commandline
- common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
- memory to memory, and option CONFIG_CMD_UNZIP to enable it
- Signed-off-by: Werner Almesberger <werner@openmoko.org>
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit 07efc9e321619c3dec213310c32e011aa6f02783
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 19:37:17 2008 -0500
- Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
- The CFG_ENV_SIZE is not suitable used for SPI flash erase
- sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
- Add condition check if CFG_ENV_SIZE is larger than
- CFG_ENV_SECT_SIZE, calculate the right number of sectors for
- erasing.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 15:54:25 2008 +0000
- ColdFire: Multiple fixes for M5282EVB
- Incorrect CFG_HZ value, change 1000000 to 1000.
- Rename #waring to #warning. RAMBAR1 uses twice
- in start.S, rename the later to FLASHBAR. Insert
- nop for DRAM setup. And, env_offset in linker file.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 15:26:43 2008 +0000
- ColdFire: Move m5282evb from board to board/freescale
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 15:25:07 2008 +0000
- ColdFire: Move m5272c3 from board to board/freescale
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 659e9bad629a480f606b286d5703aef7159edf98
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 15:23:16 2008 +0000
- ColdFire: Move m5271evb from board to board/freescale
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 05316f8ece8206339a208ec052f039cd0f7ca922
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 13:41:49 2008 +0000
- ColdFire: Add M54451EVB platform support for MCF5445x
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 19:14:08 2008 -0500
- ColdFire: Add Serial Flash support for M54455EVB
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 9f751551456828b2d0ff417f10959fb0c7110bd0
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 23 20:38:53 2008 -0500
- ColdFire: Implement SBF feature for M5445EVB
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit a7323bba229203aae2604afde131ab47bad4eadc
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 23 17:53:36 2008 -0500
- ColdFire: Add SSPI feature for MCF5445x
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit b2d022d1ac3f59bffa9cec249341e77aea168abc
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 23 17:37:10 2008 -0500
- ColdFire: Use CFI Flash driver for M54455EVB
- Remove non-common flash driver in
- board/freescale/m54455evb/flash.c. The non-cfi flash will
- use CONFIG_FLASH_CFI_LEGACY to configure the flash
- attribute.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 23 17:11:47 2008 -0500
- ColdFire: Add M5253DEMO platform support for MCF5253
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 80ba61fd82569af40e04d4a089257b81881884f2
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 14:17:09 2008 -0500
- ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit d361307e73ce1f6fc68760123f37d4876f851f3e
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 14:11:36 2008 -0500
- ColdFire: Fix M5253EVB dram bring up issue
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 4b0708093e15b412296328bf81325cf9b69fe512
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 14 14:41:06 2008 +0200
- Coding Style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 18:24:05 2008 -0500
- socrates: Update NAND driver to new API.
- Also, fix some minor formatting issues, and simplify the handling of
- "state" for writes.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit ba22d10f39eaeedd035e8265616e31ff88e314d5
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 18:03:40 2008 -0500
- quad100hd: Update NAND driver to new API.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 17:53:48 2008 -0500
- m5373evb: Update NAND driver to new API.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 1a23a197c8722b805f40895544bbdb1a648c1c82
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 17:04:30 2008 -0500
- s3c24x0: Update NAND driver to new API.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 15:56:00 2008 -0500
- at91: Update board NAND drivers to current API.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Wed Aug 13 09:11:02 2008 +0900
- Fix OneNAND build break
- Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
- - fix bufferram management at erase operation
- This patch includes the NAND/OneNAND state filed too.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9483df6408c25f16060432de3868901e352e23bc
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:43 2008 +0200
- drivers/mtd/nand_legacy: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:43 2008 +0200
- drivers/mtd/nand: Move conditional compilation to Makefile
- rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:42 2008 +0200
- drivers/mtd/onenand: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 00b1883a4cac59d97cd297b1a3a398db85982865
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:42 2008 +0200
- drivers/mtd: Move conditional compilation to Makefile
- rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:41 2008 +0200
- drivers/qe: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:40 2008 +0200
- drivers/pci: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:40 2008 +0200
- drivers/misc: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:40 2008 +0200
- drivers/input: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 88f57e093114a44aa9a858d52b099bcc52034a8c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:39 2008 +0200
- drivers/dma: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:39 2008 +0200
- drivers/block: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:39 2008 +0200
- serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
- move also conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:38 2008 +0200
- serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
- move also conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d6e9ee92e890f67594ab150689510df361133ead
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:38 2008 +0200
- common: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:09 2008 +0200
- mx31: move freescale's mx31 boards to vendor board dir
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Jul 5 23:11:11 2008 +0200
- at91: move arch-at91sam9 to arch-at91
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 195ccfc5991d48764b2519941e3507f693851d5d
- Author: Fathi BOUDRA <fabo@debian.org>
- Date: Wed Aug 6 10:06:20 2008 +0200
- OneNAND: Fill in MTD function pointers for OneNAND.
- onenand_print_device_info():
- - Now returns a string to be placed in mtd->name,
- rather than calling printf.
- - Remove verbose parameter as it becomes useless.
- Signed-off-by: Fathi Boudra <fabo@debian.org>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit aa646643b6bc250cb3a4966bf728876e0c10d329
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Wed Aug 6 21:42:07 2008 +0200
- nand_spl: Support page-aligned read in nand_load, use chipselect
- Supporting page-aligned reads doesn't incure any sinificant overhead, just
- a small change in the algorithm. Also replace in_8 with readb, since there
- is no in_8 on ARM.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
- Author: Scott Wood <scottwood@freescale.com>
- Date: Tue Aug 5 11:15:59 2008 -0500
- NAND boot: Update large page support for current API.
- Also, remove the ctrl variable in favor of passing the constants
- directly, and remove redundant (u8) casts.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit e4c09508545d1c45617ba45391c03c03cbc360b9
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Jun 30 14:13:28 2008 -0500
- NAND boot: MPC8313ERDB support
- Note that with older board revisions, NAND boot may only work after a
- power-on reset, and not after a warm reset. I don't have a newer board
- to test on; if you have a board with a 33MHz crystal, please let me know
- if it works after a warm reset.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu Jun 26 14:06:52 2008 -0500
- mpc8313erdb: Enable NAND in config.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Jul 31 12:38:26 2008 +0200
- NAND: Do not write or read a whole block if it is larger than the environment
- Environment can be smaller than NAND block size, do not need to read a whole
- block and minimum for writing is one page. Also remove an unused variable.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit eafcabd15f00c142156235c519fcc55b10993241
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Sun Jun 22 16:30:06 2008 +0200
- NAND: chip->state does not always get set.
- Fixes an issue with chip->state not always being set causing troubles.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
- Author: Ilya Yanok <yanok@emcraft.com>
- Date: Mon Jun 30 15:34:40 2008 +0200
- NAND: Scan bad blocks lazily.
- Rather than scanning on boot, scan upon the first attempt to check the
- badness of a block. This speeds up boot when not using NAND, and reduces
- the likelihood of needing to reflash via JTAG if NAND becomes
- nonfunctional.
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit dfbf617ff055e4216f78d358b0867c548916d14b
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu Jun 12 13:20:16 2008 -0500
- NAND read/write fix
- Implement block-skipping read/write, based on a patch from
- Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
- Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu Jun 12 13:13:23 2008 -0500
- NAND: Always skip blocks on read/write/boot.
- Use of the non-skipping versions was almost always (if not always)
- an error, and no valid use case has been identified.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit e1c3dbada349992875934575c97b328ab2cb33ca
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu Jun 12 11:10:21 2008 -0500
- nand: fsl_upm: convert to updated MTD NAND infrastructure
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 300253306acc72b1b2e9faf0987f86551151d7cf
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu May 22 15:02:46 2008 -0500
- fsl_elbc_nand: Hard-code the FBAR/FPAR split.
- The hardware has separate registers for block and page-within-block,
- but the division between the two has no apparent relation to the
- actual erase block size of the NAND chip.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Mar 28 22:10:54 2008 +0300
- fsl_elbc_nand: workaround for hangs during nand write
- Using current driver elbc sometimes hangs during nand write. Reading back
- last byte helps though (thanks to Scott Wood for the idea).
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
- Author: Scott Wood <scottwood@freescale.com>
- Date: Fri Mar 21 16:12:51 2008 -0500
- Freescale eLBC FCM NAND driver
- This is a driver for the Flash Control Machine of the enhanched Local Bus
- Controller found on some Freescale chips (such as the mpc8313 and the
- mpc8379).
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
- Author: Scott Wood <scottwood@freescale.com>
- Date: Tue Mar 18 15:29:14 2008 -0500
- Don't panic if a controller driver does ecc its own way.
- Some hardware, such as the enhanced local bus controller used on some
- mpc83xx chips, does ecc transparently when reading and writing data, rather
- than providing a generic calculate/correct mechanism that can be exported to
- the nand subsystem.
- The subsystem should not BUG() when calculate, correct, or hwctl are
- missing, if the methods that call them have been overridden.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit e52b34d40a8a646e3d11638ea8797e96398dba13
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 10 18:47:33 2008 +0100
- NAND: Make NAND driver less verbose per default
- This patch turns off printing of bad blocks per default upon bootup.
- This can always be shown via the "nand bad" command later.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fe56a2772e5c59577df906163d0d4b29b056140e
- Author: Sergey Kubushyn <ksi@koi8.net>
- Date: Wed Jan 9 15:36:20 2008 +0100
- NAND: Davinci driver updates
- Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
- don't have hardware handy so I can not test it at the moment but changes are
- rather trivial so it should work. It would be nice if somebody with a
- hardware checked it anyways.
- Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
- commit deac913effd8d80535c9ff4687b6fcdff540c554
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 16:50:32 2008 +0100
- NAND: Fix compilation warning and small coding style issue
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c568f77acdf896fc3dd6413ce53205b17ba809a3
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 16:49:37 2008 +0100
- NAND: Update nand_spl driver to match updated nand subsystem
- This patch changes the NAND booting driver nand_spl/nand_boot.c to match
- the new infrastructure from the updated NAND subsystem. This NAND
- subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
- subsystem.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 16:47:58 2008 +0100
- NAND: Update 4xx NDFC driver to match updated nand subsystem
- This patch changes the 4xx NAND driver ndfc.c to match the new
- infrastructure from the updated NAND subsystem. This NAND
- subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
- subsystem.
- Tested successfully on AMCC Sequoia and Bamboo.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 12072264528eba33737bc9674e19f0e925ffda23
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 16:43:25 2008 +0100
- NAND: Change nand_wait_ready() to not call nand_wait()
- This patch changes nand_wait_ready() to not just call nand_wait(),
- since this will send a new command to the NAND chip. We just want to
- wait for the chip to become ready here.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9ad754fef5053144daed3b007adaf1c9bec654c9
- Author: William Juul <william.juul@datarespons.no>
- Date: Fri Dec 14 16:33:45 2007 +0100
- make nand dump and nand dump.oob work
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
- Author: William Juul <william.juul@datarespons.no>
- Date: Mon Nov 19 14:46:00 2007 +0100
- moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
- Signed-off-by: William Juul <william.juul@tandberg.com>
- commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
- Author: William Juul <william.juul@tandberg.com>
- Date: Tue Jun 10 16:18:13 2008 -0500
- Clean out unneeded files
- Signed-off-by: William Juul <william.juul@tandberg.com>
- commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
- Author: William Juul <william.juul@datarespons.no>
- Date: Fri Nov 16 08:44:27 2007 +0100
- Create symlinks from yaffs2/direct to yaffs2
- Signed-off-by: William Juul <william.juul@tandberg.com>
- commit 90ef117b68387d66763291af0117677644166611
- Author: William Juul <william.juul@datarespons.no>
- Date: Thu Nov 15 12:23:57 2007 +0100
- Incorporate yaffs2 into U-boot
- To use YAFFS2 define CONFIG_YAFFS2
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
- Author: William Juul <william.juul@datarespons.no>
- Date: Thu Nov 15 11:13:05 2007 +0100
- YAFFS2 import
- Direct import of yaffs as a tarball as of 20071113 from their public
- CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
- The code can also be imported on the command line with:
- export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
- (Hit return when asked for a password)
- cvs checkout yaffs2
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
- commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
- Author: William Juul <william.juul@datarespons.no>
- Date: Wed Nov 14 14:28:11 2007 +0100
- Whitespace cleanup and marking broken code.
- Changes requested by maintainer Stefan Roese after
- posting patch to U-boot mailing list.
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
- Author: William Juul <william.juul@datarespons.no>
- Date: Fri Nov 9 13:32:30 2007 +0100
- Fixing coding style issues
- - Fixing leading white spaces
- - Fixing indentation where 4 spaces are used instead of tab
- - Removing C++ comments (//), wherever I introduced them
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 4cbb651b29cb64d378a06729970e1e153bb605b1
- Author: William Juul <william.juul@datarespons.no>
- Date: Thu Nov 8 10:39:53 2007 +0100
- Remove white space at end.
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
- Author: William Juul <william.juul@datarespons.no>
- Date: Wed Oct 31 13:53:06 2007 +0100
- Update MTD to that of Linux 2.6.22.1
- A lot changed in the Linux MTD code, since it was last ported from
- Linux to U-Boot. This patch takes U-Boot NAND support to the level
- of Linux 2.6.22.1 and will enable support for very large NAND devices
- (4KB pages) and ease the compatibility between U-Boot and Linux
- filesystems.
- This patch is tested on two custom boards with PPC and ARM
- processors running YAFFS in U-Boot and Linux using gcc-4.1.2
- cross compilers.
- MAKEALL ppc/arm has some issues:
- * DOC/OneNand/nand_spl is not building (I have not tried porting
- these parts, and since I do not have any HW and I am not familiar
- with this code/HW I think its best left to someone else.)
- Except for the issues mentioned above, I have ported all drivers
- necessary to run MAKEALL ppc/arm without errors and warnings. Many
- drivers were trivial to port, but some were not so trivial. The
- following drivers must be examined carefully and maybe rewritten to
- some degree:
- cpu/ppc4xx/ndfc.c
- cpu/arm926ejs/davinci/nand.c
- board/delta/nand.c
- board/zylonite/nand.c
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit cd82919e6c8a73b363a26f34b734923844e52d1c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 12 16:08:38 2008 +0200
- Coding style cleanup, update CHANGELOG, prepare release
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 17e900b8c0f38d922da47073246219dce2a847f2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 12 14:54:04 2008 +0200
- MVBC_P: fix compile problem
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 52b047ae48219b59bebe37ba743ab103fd4f8316
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 12 12:10:11 2008 +0200
- MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c9c101c660b3d1995045c61c7c6041f52b6cf335
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 12 00:36:53 2008 +0200
- ads5121: fix compiler warnings (unused variables)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 902ca09246039964d59bbcb519b1e1b5aed01308
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Aug 11 11:29:28 2008 -0500
- 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
- Use CONFIG_NUM_CPUS to match existing define used by 86xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Aug 11 09:20:53 2008 -0500
- Fix fallout from autostart revert
- The autostart revert caused a bit of duplicated code as well as
- code that was using images->autostart that needs to get removed so
- we can build again.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Aug 11 09:16:25 2008 -0500
- Fix compile error related to r8a66597-hcd & usb
- When building the 8544DS board we get this error:
- In file included from r8a66597-hcd.c:22:
- u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
- make[1]: *** [r8a66597-hcd.o] Error 1
- The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
- is set.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2d0daa03612338a813e3c9d22680e54eabfea378
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Aug 4 14:02:26 2008 -0500
- POWERPC 86xx: Move BAT setup code to C
- This is needed because we will be possibly be locating
- devices at physical addresses above 32bits, and the asm
- preprocessing does not appear to deal with ULL constants
- properly. We now call write_bat in lib_ppc/bat_rw.c.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 9de67149db576c91b9c2a0a182652331e7e44211
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Aug 4 14:01:53 2008 -0500
- POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
- Perform sync/isync as required by the architecture.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Aug 4 14:01:16 2008 -0500
- POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Aug 3 21:44:10 2008 +0200
- i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
- Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
- contacts instead of only the first 256 ones as is the case prior to
- this patch.
- Add missing MUX_* macros and update board files to use the new macros.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Aug 3 21:43:37 2008 +0200
- i.MX31: Fix IOMUX related typos
- Correct the names of some IOMUX macros.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
- Author: Steve Sakoman <steve@sakoman.com>
- Date: Mon Aug 11 20:26:16 2008 +0200
- OneNAND: Remove unused parameters to onenand_verify_page
- The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
- Signed-off-by: Steve Sakoman <steve@sakoman.com>
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 8 18:00:40 2008 +0200
- video: fix bug in cfb_console code
- FILL_15BIT_555RGB macro extension for pixel swapping
- by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
- introduced a bug in cfb_console:
- Bitmaps with odd-numbered width won't be rendered
- correctly and even U-Boot crashes are observed on
- some platforms while repeated rendering of such
- bitmaps with "bmp display". Also if a bitmap is
- rendered to an odd-numbered x starting position,
- the same problem occurs. This patch is an attempt
- to fix it.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit d9015f6a50d7258125349ef5c2af836458a0029a
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 8 18:00:39 2008 +0200
- video: fix bug in logo_plot
- If logo_plot() should ever be called with x starting
- position other than zero and for pixel depths greater
- than 8bpp, logo colors distortion will be observed.
- This patch fixes the issue.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 406819ae94f79f5b59e01d163380ca7d83709251
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 11 00:17:52 2008 +0200
- MAINTAINERS: sort entries
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Thu Aug 7 18:19:28 2008 +0800
- Add mpc7448hpc2 maintainer information
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Thu Aug 7 13:13:27 2008 +0530
- common/cmd_load.c - Minor code & Coding Style cleanup
- - os_data_header Variable is a carry over feature
- & unused. So removed all instance of this variable
- - Minor Code Style Update
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Wed Aug 6 19:32:33 2008 +0200
- Update the U-Boot wiki URL.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
- Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
- Date: Sun Aug 10 17:56:36 2008 +0200
- OneNAND: Remove base address offset usage
- While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
- using OneNAND and some using NAND, we found some differences in OneNAND and
- NAND command address handling.
- As this might confuse users (it already confused us), we like to align OneNAND
- and NAND address handling.
- The issue is that cmd_onenand.c subtracts the onenand base address from the
- addresses you type into the u-boot command line so, unlike nand, you can't
- use addresses relative to the start of the onenand part e.g. this won't work:
- onenand read 82000000 280000 400000
- you have to use:
- onenand read 82000000 20280000 400000
- Looking at recent git, the only board currently using OneNAND is Apollon, and
- for this the OneNAND base address is 0 (apollon.h)
- #define CFG_ONENAND_BASE 0x00000000
- so patch below won't break any existing boards and will align OneNAND and NAND
- handling on boards where OneNAND base address is != 0.
- Signed-off-by: Steve Sakoman <sakoman@gmail.com>
- Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit c11528083ef6e55e76df742228c26e39d151813d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 7 09:28:20 2008 -0500
- mpc85xx: workaround old binutils bug
- The recent change to move the .bss outside of the image gives older
- binutils (ld from eldk4.1/binutils-2.16) some headache:
- ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
- ppc_85xx-ld: final link failed: Bad value
- We workaround it by being explicit about the program headers and not
- assigning the .bss to a program header.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0bf202ec586d4466c900e987720fa635c594d689
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 10 01:26:26 2008 +0200
- Revert "[new uImage] Add autostart flag to bootm_headers structure"
- This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
- The commit was based on a misunderstanding of the (documented)
- meaning of the 'autostart' environment variable. It might cause
- boards to hang if 'autostart' was used, with the potential to brick
- them. Go back to the documented behaviour.
- Conflicts:
- common/cmd_bootm.c
- common/image.c
- include/image.h
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Aug 9 23:17:32 2008 +0200
- TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
- - enable CFI driver where this was forgotten
- - enable mtdparts support
- - adjust default environment
- etc.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 41266c9b5a5f873df3ec891bb0907616958b5602
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Tue Aug 5 10:51:57 2008 -0500
- FIT: Fix handling of images without ramdisks
- boot_get_ramdisk() should not treat the case when a FIT image does
- not contain a ramdisk as an error.
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- Acked-by: Michal Simek <monstr@monstr.eu>
- commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
- Author: Sergey Lapin <slapin@ossfans.org>
- Date: Sat Aug 9 01:39:09 2008 +0400
- DataFlash: AT45DB021 fix and AT45DB081 support
- Fix for page size of AT45DB021. Also adding bigger AT45DB081
- which comes with some newer boards.
- Signed-off-by: Sergey Lapin <slapin@ossfans.org>
- commit ba9324451b662dd393afa53e5cc36fc5d3d10966
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Aug 8 16:30:23 2008 +0900
- sh: Update sh7763rdp config
- Add sh_eth support to sh7763rdp.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- commit 21f971ec265f6042ec21636d55d06a6bc0751077
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 7 01:22:29 2008 +0200
- TQM823L: re-enable logo support; update LCD_INFO text
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Aug 8 16:41:56 2008 +0200
- TQM8xxL: fix support for second flash bank
- When switching the TQM8xxL modules to use the CFI flash driver,
- support for the second flash bank was broken because the CFI driver
- did not support dynamically sized banks. This gets fixed now.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2a112b234d879f6390503a5f4e38246acce9d0b0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Aug 8 16:39:54 2008 +0200
- CFI: allow for dynamically determined flash sizes and addresses
- The CFI driver allowed only for static initializers in the
- CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
- several flash banks contiguously if the bank sizes were not known in
- advance, which kind of violates U-Boot's design philosophy.
- (will be used for example by the TQM8xxL boards)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Thu Aug 7 23:26:35 2008 -0700
- QE UEC: Fix compiler warnings
- Moved static functions earlier in file so forward declarations are not needed.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d5d28fe4aad5f4535400647a5617c11039506467
- Author: David Saada <David.Saada@ecitele.com>
- Date: Mon Mar 31 02:37:38 2008 -0700
- QE UEC: Add MII Commands
- Add MII commands to the UEC driver. Note that once a UEC device is selected,
- any device on its MDIO bus can be addressed.
- Signed-off-by: David Saada <david.saada@ecitele.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Wed Jul 9 21:07:38 2008 +0900
- usb: add support for R8A66597 usb controller
- add support for Renesas R8A66597 usb controller.
- This patch supports USB Host mode.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 1d10dcd041aaeae9fd7c821005692898a0303382
- Author: Hunter, Jon <jon-hunter@ti.com>
- Date: Sat Jul 26 18:59:16 2008 -0500
- Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
- Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
- Signed-off-by: Jon Hunter <jon-hunter@ti.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit eab1007334b93a6209f1ec33615e26ef5311ede7
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Wed Aug 6 15:42:52 2008 -0400
- ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
- The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
- configuration to match the schematic, and also sets the SDR0_PFC1 register to
- select the corresponding mode for the UARTs.
- Signed-off-by: Steven A. Falco <sfalco@harris.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
- Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
- Date: Wed Aug 6 14:42:13 2008 +0200
- avr32: add support for EarthLCD Favr-32 board
- This patch adds support for the Favr-32 board made by EarthLCD.
- This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
- has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
- Ethernet, audio out, USB device, SD-card slot, USART and various other
- connectors for cennecting stuff to SPI, I2C, GPIO, etc.
- Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit bc9019e19758a19a388fb20ef18dc771cd39fdda
- Author: Rafael Campos <rafael.campos@hanscan.com>
- Date: Thu Jul 31 10:22:20 2008 +0200
- cfi-flash: Added support to flash_real_protect for Atmel flash devices
- Some of the flash memories produced by ATMEL start in read-only mode.
- We need to unprotect it. This patch allows the AT49BV6416 to work with
- cfi_flash memories. Tested in the at91rm9200ek board.
- Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Aug 5 15:36:39 2008 +0200
- cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 6 14:06:03 2008 +0200
- Fix merge problems
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f2302d4430e7f3f48308d6a585320fe96af8afbd
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 6 14:05:38 2008 +0200
- Fix merge problems
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
- Author: Kenneth Johansson <kenneth@southpole.se>
- Date: Tue Jul 15 12:13:38 2008 +0200
- mpc5121: Move iopin features from board specific to common files.
- And in the process eliminate some duplicate register defines.
- Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
- commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
- Author: John Rigby <jrigby@freescale.com>
- Date: Tue Aug 5 17:38:57 2008 -0600
- mpc5121: squash some fdt fixup errors
- On ADS5121 when booting linux the following errors are seen:
- Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
- Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
- Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
- This is caused by ft_cpu_setup trying to deal with
- both old and new soc node naming. This patch
- fixes this by being smarter about what to
- fixup.
- Also do soc node fixups by compatible instead of by path.
- A new board config called OF_SOC_COMPAT defined
- to be "fsl,mpc5121-immr" replaces the old
- OF_SOC node path that was defined to be "soc@80000000".
- Old device trees still work, but the compatiblity
- is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
- which is on by default in include/configs/ads5121.h.
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:30 2008 +0200
- drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:32 2008 +0200
- nios2/sysid: fix printf warning
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:33 2008 +0200
- Fix remaining build issues with MPC8xx FADS boards.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:31 2008 +0200
- nios2: fix phys_addr_t and phys_size_t support
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:34 2008 +0200
- mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Fri Aug 1 09:48:29 2008 +0100
- Fix bitmap display for atmel lcd controller
- The current lcd_display_bitmap() function does not work properly
- for the Atmel LCD controller.
- 2 fixes need to be done:-
- (a) when setting the colour map, use the lcd_setcolreg() function
- as provided by the Atmel driver
- (b) the data is never actually written to the lcd framebuffer !!
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- commit 2a433c66b1e2770349fe4911be23c375f053ebd8
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 1 08:40:34 2008 +0200
- qemu_mips: update README to follow qemu update about default machine
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ac169d645f5f0e0b9a232563099209e92a355d8e
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 31 19:53:21 2008 -0500
- ColdFire: Fix compilation issue caused by a missing function
- Implement usec2ticks() which is used by fsl_i2c.c in
- lib_m68k/time.c
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 31 19:53:06 2008 -0500
- Fix compilation error for TASREG
- TASREG is ColdFire platform, the include ppc4xx.h in
- board/esd/common/flash.c causes conflict.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 31 19:52:36 2008 -0500
- Fix compilation error for MCF5275
- Rename OBJ to COBJ in board/platform/Makefile
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 5c40548f01218360a1f1395198c50ff45f3035b5
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 31 19:52:28 2008 -0500
- Fix compile error caused by incorrect function return type
- Rename int mii_init(void) to void mii_init(void) for idmr
- ColdFire platform
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit a58c78067c928976c082c758d3987e89ead5b191
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Aug 1 12:06:22 2008 +0200
- Fix build issues with MPC8xx FADS boards.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 17:54:03 2008 +0200
- Prepare v1.3.4-rc2: update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Thu Jul 31 16:09:00 2008 +0100
- Add gzipped logo support
- The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
- If this option is set, additionally to standard BMP
- images, gzipped BMP images can be displayed via the
- splashscreen support or the bmp command.
- However, the splashscreen function *only* supports standard BMP images.
- This patch adds the documented gzip support.
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Thu Jul 31 15:56:48 2008 +0100
- Fix Atmel LCD controller endianess for AVR32 processors
- The Atmel lcd controller is used on Atmel's AT91 (little endian) and
- AVR32 (big endian) platforms.
- As such, the controller can handle both big and little endian memory.
- This patch fixes the driver for the AVR32 platform.
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Jul 31 15:56:01 2008 +0200
- apollon: fix build out of tree
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2e752be39d3e398d4ab89ffa6634c397df298297
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Jul 31 12:35:04 2008 +0200
- Uncompressed images loaded to their start address shall set load_end too
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c37207d7f51e19c17f859966f314e27cc1231801
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 16 16:38:59 2008 +0200
- Fix printf() format problems with configurable prompts
- U-Boot allows for configurable prompt strings using the
- CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
- the assumption was that any such user defined problts would contain
- exactly one "%d" format specifier. But some boards did not.
- To allow for flexible boot prompts without adding too complex code we
- now allow to specify the whole list of printf() arguments in the user
- definition. This is powerful, but requires a responsible user who
- really understands what he is doing, as he needs to know for exanple
- which variables are available in the respective context.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 54754120637b6a7f4ff774fb199fc550bcfea1da
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 17:02:14 2008 +0200
- TQM85xx: fix typo introduce by commit ffbb5cb9
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 15:27:01 2008 +0200
- mvbc_p board: fix most build warnings.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c4ec6db074051d2f6fc76a66411c60621b22bc02
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 13:57:20 2008 +0200
- E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
- Avoid "integer constant is too large for 'long' type" warnings.
- And simplify the code.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9196b44334c330cc13de2464c59181e4db71f549
- Author: Matvejchikov Ilya <matvejchikov@gmail.com>
- Date: Wed Jul 30 23:21:19 2008 +0400
- 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
- Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
- commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
- Author: Matvejchikov Ilya <matvejchikov@gmail.com>
- Date: Wed Jul 30 23:20:32 2008 +0400
- PPC: Add pci_clk in the global_data for CPM2 processors
- This patch adds pci_clk field to the global_data structure for the
- processors which have CPM2 module in case the CONFIG_PCI is defined.
- Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
- commit f0ff885ca64655bee6540eb8a25eed90b1152686
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jul 30 14:13:30 2008 -0500
- mpc85xx: Update linker scripts for Freescale boards
- * Move to using absolute addressing always. Makes the scripts a bit more
- portable and common
- * Moved .bss after the end of the image. These allows us to have more
- room in the resulting binary image for code and data.
- * Removed .text object files that aren't really needed
- * Make sure _end is 4-byte aligned as the .bss init code expects this.
- (Its possible that the end of .bss isn't 4-byte aligned)
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jul 30 08:01:15 2008 -0500
- Fix compile warnings in dlmalloc
- The origional code was using on odd reference to get to the first
- real element in av_[]. The first two elements of the array are
- not used for actual bins, but for house keeping. If we are more
- explicit about how use the first few elements we can get rid of the
- warnings:
- dlmalloc.c: In function 'malloc_extend_top':
- dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
- dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
- dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
- ...
- The logic of how this code came to be is:
- bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
- SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
- bin_at(0) = &(av_[0])
- Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 30 10:21:01 2008 +0200
- ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 30 09:59:51 2008 +0200
- cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
- A recent patch used '#if (CONFIG_CMD_USB)' instead of
- '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
- common/bootm.c compile again.
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Jul 22 08:01:43 2008 +0900
- Remove unused I2C at apollon board
- There are no I2C devices on this board.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 3c95960e526b3b026da20201db64526f46faf14b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 10:12:09 2008 +0200
- at91rm9200dk, csb637: fix NAND related build problems
- Tried fixing NAND support for the at91rm9200dk board; untested.
- Disabled NAND support in the csb637 board config file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Jul 30 12:39:28 2008 +0200
- ppc4xx: ML507: Environment in flash and MTD Support
- - Relocate the location of U-Boot in the flash
- - Save the environment in one sector of the flash memory
- - MTD Support
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Tue Jul 29 17:16:10 2008 +0200
- ppc4xx: ML507: Use of get_ram_size in board ml507
- - Change suggested by WD
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Mon Jul 21 20:30:07 2008 +0200
- ppc4xx: ML507: U-Boot in flash and System ACE
- This patch allows booting from FLASH the ML507 board by Xilinx.
- Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
- Author: Julien May <mailinglist@miromico.ch>
- Date: Mon Jun 23 13:57:52 2008 +0200
- Add support for the hammerhead (AVR32) board
- The Hammerhead platform is built around a AVR32 32-bit microcontroller
- from Atmel. It offers versatile peripherals, such as ethernet, usb
- device, usb host etc.
- The board also incooperates a power supply and is a Power over Ethernet
- (PoE) Powered Device (PD).
- Additonally, a Cyclone III FPGA from Altera is integrated on the board.
- The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
- DDR2 SDRAM interfaces, which will cover even the most exceptional need
- of memory bandwidth. Together with the onboard video decoder the board
- is ready for video processing.
- For more information see: http:///www.miromico.com/hammerhead
- Signed-off-by: Julien May <mailinglist@miromico.ch>
- [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jul 29 12:23:49 2008 -0500
- fsl_i2c: Use timebase timer functions instead of get_timer()
- The current implementation of get_timer() is only really useful after we
- have relocated u-boot to memory. The i2c code is used before that as part
- of the SPD DDR setup.
- We actually have a bug when using the get_timer() code before relocation
- because the .bss hasn't been setup and thus we could be reading/writing
- a random location (probably in flash).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
- Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
- Date: Tue Jul 29 14:49:31 2008 +0200
- Adder8xx: Fix CFG_MONITOR_LEN
- Due to increased space usage, U-Boot can no longer be stored in three sectors.
- The current U-Boot use just over three flash sectors (197k), and U-Boot will
- become corrupt after saving environment variables. This patch adds another 64k
- to CFG_MONITOR_LEN.
- Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
- commit a4c59ad4a21140550ada6f97690d2527c4146ce5
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Jul 29 08:47:57 2008 +0900
- Add OneNAND IPL related files to gitignore
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 8d87589e8e874df7120a3d9667f051bc33bac250
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Mon Jul 28 20:38:25 2008 +0200
- API: Teach the storage layer about SATA and MMC options.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- Acked-by: Rafal Jaworowski <raj@semihalf.com>
- commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Mon Jul 28 20:37:48 2008 +0200
- API: Dump contents of sector 0 in the demo application.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- Acked-by: Rafal Jaworowski <raj@semihalf.com>
- commit 13ca6305f2eba49c175f6370c35286141059c789
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Mon Jul 28 20:37:10 2008 +0200
- API: Correct storage enumeration routine, other minor fixes in API storage area.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- Acked-by: Rafal Jaworowski <raj@semihalf.com>
- commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Mon Jul 28 20:36:19 2008 +0200
- API: Fix compilation warnings in api_examples/demo.c.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- commit c14eefcc48212af2f3314809605698dd8393a90a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Jul 27 17:09:43 2008 +0200
- Fix more printf() format warnings
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 936897d4d1365452bbbdf8430db5e7769ef08d38
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Jul 25 15:18:16 2008 +0200
- Fix remaining CFG_CMD_ define, ifdef and comments
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5d1d00fb36005482e1803a00ddc46efa11d719af
- Author: Stefano Babic <sbabic@denx.de>
- Date: Fri Jul 25 08:57:40 2008 +0200
- Add include for config.h in command.h.
- Because the cmd_tbl_s structure depends on the configuration file, it
- must be assured that config.h is included before the structure is
- evaluated by the compiler. If this is not certain, it could happen
- that the compiler generates structures of different size, depending
- on the fact if the source file includes <config.h> before or after
- <command.h>.
- The effect is that u-boot crashes when tries to relocate the command
- table (for ppc) or try to access to the command table for other
- architectures.
- The problem can happen on board-depending commands. All general
- commands under /common are unaffected, because they include already
- config.h before command.h.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Jul 23 13:16:06 2008 -0500
- NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
- This fixes building out-of-tree.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
- Author: Heiko Schocher <hs@denx.de>
- Date: Wed Jul 23 07:30:46 2008 +0200
- Fix warnings if compiling with IDE support.
- cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
- cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 7610db17fd4d59c51d825488526d85ede2f06767
- Author: Adrian Filipi <adrian.filipi@eurotech.com>
- Date: Tue Jul 22 14:28:11 2008 -0400
- Removed support for the adsvix board.
- Support for the adsvix was originally provided by Applied Data
- Systems (ADS), inc., now EuroTech, Inc.
- The board never shipped aside from some sample boards.
- Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
- commit f96b44cef897bd372beb86dde1b33637c119d84d
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jul 22 16:22:11 2008 +0200
- ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
- If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
- never set, because relocation to RAM is actually never done by U-boot
- itself. However, several pieces of code check if this flag is set at
- some time.
- So, to make sure this flag is set on boards skipping relocation, this
- is added to the initialisation of U-boot at a moment where it is safe
- to do so.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Jul 21 14:26:23 2008 -0500
- fsl-i2c: fix writes to data segment before relocation
- Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
- relocation. Commit d8c82db4 added the ability for i2c_init() to program the
- I2C bus speed and save the value in i2c_bus_speed[], which is a global
- variable. It is an error to write to the data segment before relocation,
- which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
- Author: Wolfgang Ocker <weo@reccoware.de>
- Date: Mon Jul 28 16:56:51 2008 +0200
- mips: Fix baudrate divisor computation on alchemy cpus
- Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
- on alchemy cpus.
- Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sat Jul 5 00:08:48 2008 -0700
- Moved initialization of AVR32 Ethernet controllers to board_eth_init()
- Renamed initialization functions for atngw100 and atstk1000.
- Removed initializations for these boards from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Jul 23 10:55:46 2008 +0200
- spi flash: Fix printf() format warnings
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Jul 23 10:55:31 2008 +0200
- atmel_mci: Fix printf() format warnings
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Jul 23 10:55:15 2008 +0200
- avr32: Fix printf() format warnings
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Jul 23 10:52:19 2008 +0200
- avr32: asm/io.h needs asm/types.h
- map_physmem() takes a phys_addr_t as parameter. This type is defined in
- asm/types.h, so we need to include that file.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
- Author: Michal Simek <monstr@monstr.eu>
- Date: Thu Jul 17 12:25:46 2008 +0200
- microblaze: Fix printf() format issues
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Thu Jul 17 07:27:51 2008 +0530
- Remove unused code from lib_arm/bootm.c
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
- Author: Detlev Zundel <dzu@denx.de>
- Date: Wed Jul 16 18:56:45 2008 +0200
- tqm85xx: Demystify 'DK: !!!' comment
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit b2f44ba570f3a01113bbb745daf46f3858d22f53
- Author: Detlev Zundel <dzu@denx.de>
- Date: Wed Jul 16 18:56:44 2008 +0200
- 83xx/85xx/86xx: Add LTEDR local bus definitions
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Jul 16 16:22:32 2008 +0200
- serial_xuartlite.c: fix compiler warnings
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 11:03:35 2008 +0200
- POST: Add disable interrupts in some of the missing CPU POST tests
- Some CPU POST tests did not disable the interrupts while running. This
- seems to be necessary to protect this self modifying code.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 97a3bf268d096e0e97e54048448c35114edcf557
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 10:43:24 2008 +0200
- ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
- This is needed for boards that define CFG_64BIT_STRTOUL but don't define
- CFG_64BIT_LBA.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0043ac55024963295fc79b39af85b6dc3b261e17
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Fri Jul 18 11:22:23 2008 +0200
- POST PPC4xx/spr IVPR only if PPC440
- The SPR IVPR register is only present (as far as I know) for
- processors with a PPC440 core.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 10:42:29 2008 +0200
- ppc4xx: Enable 64bit printf format on 440/460 platforms
- This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
- 440/460 platforms. This may be needed since those platforms support
- 36bit physical address space.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 15:57:23 2008 +0200
- ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
- This patch fixes a problem with incorrect MODTx (On Die Termination)
- setup for a configuration with multiple DIMM's and multiple ranks.
- Without this change Katmai was unable to boot Linux with DDR2 frequency
- >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
- with DDR2 frequency = 640MHz and mem=4GB.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 12:24:41 2008 +0200
- ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Thu Jul 17 12:47:09 2008 +0200
- ppc4xx: ML507 Board Support
- The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
- among others:
- -Virtex 5 FX FPGA (With a ppc440x5 in it)
- -256MB of SDRAM2
- -32MB of Flash
- -I2C Eeprom
- -System ACE chip
- -Serial ATA connectors
- -RS232 Level Conversors
- -Ethernet Transceiver
- This patch gives support to a standard design produced by EDK for this
- board: ppc440, uartlite, xilinx_int and flash
- - Includes Changes propossed by Stefan Roese and Michal Simek
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Acked-by: Stefan Roese <sr@denx.de>
- commit d865fd09809a3a18669f35f970781820af40e4de
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Thu Jul 17 11:44:12 2008 +0200
- ppc4xx: CPU PPC440x5 on Virtex5 FX
- -This patchs gives support for the embbedded ppc440
- on the Virtex5 FPGAs
- -interrupts.c divided in uic.c and interrupts.c
- -xilinx_irq.c for xilinx interrupt controller
- -Include modifications propossed by Stefan Roese
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 340ccb260f21516be360745d5c5e3bd0657698df
- Author: Sebastian Siewior <bigeasy@linutronix.de>
- Date: Wed Jul 16 20:04:49 2008 +0200
- cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
- This got broken by commits 93c56f212c
- [cfi_flash: support of long cmd in U-boot.]
- That command needs to be in little endian format on BE machines
- with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
- gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
- the cmdbuf in case portwidth = chipwidth = 8bit.
- Cc: Alexey Korolev <akorolev@infradead.org>
- Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
- Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
- commit 11188d55bc16dd907451c00282e00a038f73dd62
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 17 10:40:51 2008 +0200
- ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 021f6df6e96af5b387810cf96d24848da1faa55c
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu Jul 10 17:20:51 2008 +0400
- 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
- The thinko was quite silly indeed, I messed with !ptr. Normally this
- would trigger some fault, but in U-Boot NULL pointer is equal to phys
- 0, so the code was working still, just didn't actually test mpc8315erdb
- environment variable value. Heh.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Tue Jul 8 21:00:04 2008 +0400
- 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
- Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
- support, or without TSEC1 but with USB ULPI PHY support in addition.
- With this patch user can specify desired USB PHY.
- Also, it seems that we can't distinguish the two boards in software, so
- user have to set `mpc8315erdb' environment variable to either 'tsec1'
- (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
- Linux will not probe for TSEC1.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Tue Jul 8 20:59:43 2008 +0400
- fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
- Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
- MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
- (connected to the four-ports hub, usb host only).
- This patch implements support for passing Dual-Role USB controller's
- device tree property phy_type through the usb_phy_type environment
- variable.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 699f05125509249072a0b865c8d35520d97cd501
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jul 15 22:22:44 2008 +0200
- Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit bcab74baa6b1b1c969038ab6f64a186239180405
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Jul 15 11:23:02 2008 -0400
- Round the serial port clock divisor value returned by calc_divisor()
- Round the serial port clock divisor value returned by
- calc_divisor()
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 0328ef0edfe950f0b7b8b368dae482531506b74a
- Author: Robin Getz <rgetz@blackfin.uclinux.org>
- Date: Tue Jul 15 21:44:46 2008 +0200
- Fix DHCP protocol so U-Boot does not respond too early
- on the network with it's offered IP number; it should not reply until
- after it has received a DHCP ACK message. Also ensures that U-Boot
- does it's DHCPREQUEST as broadcast (per RFC 2131).
- Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
- Author: Sebastian Siewior <bigeasy@linutronix.de>
- Date: Tue Jul 15 13:35:23 2008 +0200
- cfi_flash: make the command u32 only
- This got changed by commit 93c56f212c
- [cfi_flash: support of long cmd in U-boot.]
- Long is the wrong type because it will behave differently on 64bit
- machines in a way that is probably not expected. u32 should be
- enough.
- Cc: Alexey Korolev <akorolev@infradead.org>
- Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
- Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
- commit 31cfe57491b183acae575d486729e158f016c27b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jul 14 23:48:41 2008 +0200
- tools/gitignore: update to all generated files
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Wed Jul 9 18:30:44 2008 +0200
- mpc5xxx: Add MVBC_P board support
- The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
- controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit e2d31fb3450653115452144363d5bde4e5e3e693
- Author: Timur Tabi <timur@freescale.com>
- Date: Thu Jun 19 17:56:11 2008 -0500
- Update Freescale sys_eeprom.c to handle CCID formats
- Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
- NXID format replaces the older CCID format, but it's important to support both
- since most boards out there still use the CCID format. This change is in
- preparation for using one file to handle both formats. This will also unify
- EEPROM support for all Freescale 85xx and 86xx boards.
- Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
- instead of ID_EEPROM_ADDR.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Jul 11 17:22:43 2008 +0900
- pci: sh: Add pci_skip_dev and pci_print_dev function
- Add function of new PCI, pci_skip_dev and pci_print_dev.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 1107014e835ec9d46c0333f4211d104f77442db0
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 14 20:29:07 2008 -0500
- Clean up INIT_RAM options
- The L2_INIT_RAM option was unused, and recent changes to the TLB code
- meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
- the amount of mapped space attached to nothing, we change things so the TLBs
- get cleared.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 4524561820a9327e89107854b3a7187800ccf719
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 14 20:26:57 2008 -0500
- Remove fake flash bank from 8544 DS
- The fake flash bank was generating errors for anyone who didn't have a
- PromJET hooked up to the board. As that constitutes the vast majority of
- users, we remove it.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:07:03 2008 -0500
- MPC8544DS: Add ATI Video card support
- Add support for using a PCIe ATI Video card on PCIe2.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:07:02 2008 -0500
- 85xx: Add some L1/L2 SPR register definitions
- Add new L1/L2 SPRs related to e500mc cache config and control.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e5852787f0c3c442a276262f13d91ca450605ac0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:07:01 2008 -0500
- MPC8544DS: Report board id, board version and fpga version.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 73f15a060f67a2462551c334215bd20fac6b81d1
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:07:00 2008 -0500
- 85xx: Cleanup L2 cache size detection
- The L2 size detection code was a bit confusing and we kept having to add
- code to it to handle new processors. Change the sense of detection so we
- look for the older processors that aren't changing.
- Also added support for 1M cache size on 8572.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c3ca7e5e00a24451f20df3bded9a61ba541921df
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:08 2008 -0400
- sbc8560: enable CONFIG_OF_LIBFDT by default
- Make the default build for the sbc8560 board be powerpc
- capable with libfdt support.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 14 20:04:40 2008 -0500
- Fix indentation for default boot environment variables
- This was proposed by Paul Gortmaker in response to Wolfgang's comments on
- similar #defines in sbc8560.h.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:07 2008 -0400
- sbc8560: add default fdt values
- Add in the default fdt settings and the typical EXTRA_ENV
- settings as borrowed from the mpc8560ads. Fix a couple
- of stale references to the mpc8560ads dating back to the
- original clone/fork.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d04e76edf92f7f89696989e8702b97e020455af3
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:06 2008 -0400
- sbc8560: add in ft_board_setup()
- Add in for the sbc8560, the ft_board_setup() routine, based on what is
- in use for the Freescale MPC8560ADS board.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit c158bcaca3b31cbe38c4143812e6170e38a57393
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:05 2008 -0400
- sbc8560: define eth0 and eth1 instead of eth1 and eth2
- The existing config doesn't define CONFIG_HAS_ETH0, and so the
- fdt support doesn't update the zeros in the dtb local-mac with
- real data from the u-boot env. Since the existing config is
- tailored to just two interfaces, get rid of the ETH2 definitions
- at the same time.
- Also don't include any end user specific data into the environment
- by default -- things like MAC address, network parameters etc. need
- to come from the end user.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:04 2008 -0400
- sbc8560: properly set cs0_bnds for 512MB
- The sbc8560 board ships with 512MB of memory installed,
- but the current cs0_bnds is hard coded for 256MB. Set the
- value based on CFG_SDRAM_SIZE.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:03 2008 -0400
- sbc8560: proper definitions for TSEC.
- The definitions for the TSEC have become out of date. There is no
- longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
- Update to match those of other boards, like the MPC8560ADS.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- commit 71074abbe0c76429577aff58aeff0a24ad210b23
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Wed Jul 9 13:23:05 2008 -0400
- 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
- Some boards that have external 16550 UARTs don't have a direct
- tie between bi_busfreq and the clock used for the UARTs. Boards
- that do have such a tie should set CFG_NS16550_CLK to be
- get_bus_freq(0) -- which most of them do already.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 24ef76f320fbadf074105229826514db140f939f
- Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Date: Wed Jul 2 07:03:53 2008 -0700
- Change the temp map to ROM to align addresses to page size.
- With a page size of BOOKE_PAGESZ_16M, both the real and effective
- addresses must be multiples of 16MB. The hardware silently truncates
- them so the code happens to work. This patch clarifies the situation
- by establishing addresses that the hardware doesn't need to truncate.
- Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 06b4186c10204b6683edb047ac5f506fb0ce0937
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jun 17 17:45:22 2008 -0500
- mpc85xx: use IS_E_PROCESSOR macro
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Jun 16 15:55:53 2008 -0500
- fdt: add crypto node handling for MPC8{3, 5}xxE processors
- Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
- check rev and up-rev crypto node (to SEC rev. 2.4 property values)
- if on an 'EA' processor, e.g. MPC8349EA.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Jul 11 15:10:11 2008 -0400
- ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
- ARM DaVinci: Remove extern phy_t declaration by moving
- code to proper place.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Jul 11 15:10:10 2008 -0400
- ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
- ARM DaVinci: Remove duplicate definitions of MACH_TYPE
- and prototype of i2c_init().
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:03:02 2008 -0500
- Fix some more printf() format problems.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 45b16d22c64674ccd8c4637456a987463609141c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 22:38:42 2008 +0200
- Fix coding style; make code better parsable by external tools
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b880cbf207b1c109d3a661417a8feddcbd729a9d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 21:19:08 2008 +0200
- cpu/i386/serial.c: Fix syntax errors
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 20:41:35 2008 +0200
- elppc board: Coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 20:40:22 2008 +0200
- elppc board: fix syntax error.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 20:38:26 2008 +0200
- EB+MCF-EV123 board: fix coding style (alingment)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6841785a0bb0f38175456a923edd634fb7dd6947
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 20:36:44 2008 +0200
- EB+MCF-EV123 board: fix syntx error
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 7 18:02:08 2008 -0500
- Remove LBC_CACHE_BASE from 8544 DS
- The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
- space for some anyway, we were allowing speculative loads into unmapped space,
- which would cause an exception (annoying, even if ultimately harmless).
- Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
- problem.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 15:19:07 2008 +0200
- Code cleanup: fix old style assignment ambiguities like "=-" etc.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d7854223c5c85b5849fbf422cc8ac0efef461c37
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 15:10:53 2008 +0200
- AmigaOneG3SE: remove dead and incomplete files
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b64f190b7a34224df09b559ca111eb1b733f00ad
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 15:06:35 2008 +0200
- Fix printf() format issues with sizeof_t types by using %zu
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f354b73e16a86f9e9085471a830605f74f84ea5d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jul 14 14:11:45 2008 +0200
- vsprintf: add z and t options
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 13 23:07:35 2008 +0200
- Fix some more printf() format issues.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d5996dd555edf52721b7691a4c59de016251ed39
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 13 19:51:00 2008 +0200
- Fix some more printf() format problems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0f9d5f6d6e814907794995c6a22af752040c35d9
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 13 19:48:26 2008 +0200
- ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Sat Jul 12 17:31:36 2008 +0200
- Fix bug in Lime video driver
- We need to wait while drawing engine clears frame
- buffer before any further software accesses to frame
- buffer will be initiated. Otherwise software drawn
- parts could be partially destroyed by the drawing
- engine or even GDC chip freeze could occur (as
- observed on socrates board).
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Jul 12 14:36:34 2008 +0200
- Fix some more printf() format issues.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 18c8a28aad49803780bd8d52432ded528e37e701
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 15:11:57 2008 +0200
- hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 11:50:53 2008 +0200
- hwmon: Cleaning hwmon devices
- Clean Makefile
- Move device specific values to driver for better reading
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- Acked-by: Stefan Roese <sr@denx.de>
- commit c78fce699c7ff467ecd841da6a79f065180bf578
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 10:43:13 2008 +0200
- FIS: repare incorrect return value with ramdisk handling
- Microblaze and PowerPC use boot_get_ramdisk for loading
- ramdisk to memory with checking return value.
- Return 0 means success. Return 1 means failed.
- Here is correspond part of code from bootm.c which check
- return code.
- ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
- &rd_data_start, &rd_data_end);
- if (ret)
- goto error;
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 10:10:32 2008 +0200
- microblaze: Remove useless ancient headers
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 53ea981c3124b13c137c2d10e975b7c6672266e0
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 10:10:31 2008 +0200
- microblaze: Clean uartlite driver
- Redesign uartlite driver to in_be32 and out_be32 macros
- Fix missing header in io.h
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit dbf3dfb386a2d5d2381814e39985ab2e21894550
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Fri Jul 11 02:39:14 2008 +0200
- Enable passing of ATAGs required by latest Linux kernel.
- commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Jul 11 10:24:15 2008 -0400
- Fix integer overflow warning in calc_divisor()
- which happened when rounding the serial port clock divisor
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 6b760189d77f001684e3160b355c185ca3804961
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Fri Jul 11 01:09:59 2008 +0200
- Fix build time warnings in function mmc_decode_csd()
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit c15947d6ce0d59925c97fdfac692476af6e262d0
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Thu Jul 10 10:46:33 2008 -0400
- ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
- caused by missing dcache status/enable/disable functions.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 13:53:31 2008 +0200
- ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
- This patch removes some ft_board_setup() functions from some 4xx boards.
- This can be done since we now have a default weak implementation for this
- in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
- implementation like canyonlands need their own version.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 13 14:58:16 2008 +0200
- Add last known maintainer for orphaned boards; reformat.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Jul 10 13:16:04 2008 +0200
- Remove kharris@nexus-tech.net from MAINTAINERS
- Mail to kharris@nexus-tech.net bounces because the user doesn't exist
- anymore. You can't be a maintainer without a valid e-mail address, so
- move all boards that used to be maintained by Kyle Harris to the
- "orphaned" list.
- Currently, only PowerPC has a list of orphaned boards, so this patch
- creates one for ARM as well.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 17bd17071463b0cde391ac4a0863d600474b4ea1
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Jul 10 01:15:10 2008 +0200
- at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
- On the at91sam9260ep development board there is an EEPROM
- connected to the TWI interface (PA23, PA24 Peripheral A
- multiplexing), so we cannot use these pins as ETX2, ETX3.
- This patch configures PA10, PA11 pins for ETX2, ETX3
- instead of PA23, PA24 pins.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
- commit f889265753ddf4465d9d580827bb9289bfac55d6
- Author: Kenneth Johansson <kenneth@southpole.se>
- Date: Sat Jul 12 13:18:34 2008 -0600
- fix DIU for small screens
- The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
- so it was not possible to set a slow pixel clock and thus prevented
- display on small screens.
- Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit b60b8573875e650e4c69be667bfc88d3ed474a7c
- Author: John Rigby <jrigby@freescale.com>
- Date: Fri Jul 11 14:44:09 2008 -0600
- ADS5121 cleanup compile warnings
- board/ads5121/iopin.c
- Replace bit fields in struct iopin_t with a single
- field and intialize it via plain old macros.
- This fixes the type pun warnings and makes the code
- more readable.
- board/ads5121/ads5121.c
- Add include iopin.h to ads5121.c for the iopin_initialize
- prototype.
- Add an extern void ads5121_diu_init(void)
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit bde63587622c4b830a27d1ddf7265843de9e994f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 11 22:56:11 2008 +0200
- Fix some more printf() format issues.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 11 22:55:31 2008 +0200
- Fixed some out-of-tree build issues
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 16:20:23 2008 -0500
- ColdFire: Fix FB CS not setup properly for Mcf5282
- Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
- CFG_CSn_RO is defined as 0, the chipselect will not
- be assigned.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 15:47:27 2008 -0500
- ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
- Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
- clock module in cpu/<cf arch>/cpu_init.c
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit f94945b517f10e01927101679c62361e03d4e837
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 15:25:01 2008 -0500
- ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 15:21:44 2008 -0500
- Fix compile error caused by missing timer function
- Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit c37ea031175b807c54e6bad9b270e9bede6c0078
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 15:14:25 2008 -0500
- Fix compile error caused by incorrect function return type
- Rename int mii_init(void) to void mii_init(void)
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:27:23 2008 -0500
- ColdFire: Fix power up issue for MCF5235
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:19:07 2008 -0500
- ColdFire: Fix compiling error for MCF5275
- The compiling error was caused by missing a closed parentheses
- in speed.c
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:14:01 2008 -0500
- ColdFire: Fix timer issue for MCF5272
- The timer was assigned to wrong timer memory mapped which
- caused udelay() and timer() not working properly.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:12:13 2008 -0500
- ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- commit 8371dc2066136be21e10b7b9293e469297d77298
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:05:23 2008 -0500
- ColdFire: Add -got=single param for new linux v4e toolchains
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 13:21:19 2008 -0500
- ColdFire: Fix code flash configuration for M547x/M548x boards
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- commit 6e37091afc07fdcc15590093fd066b0cb7399f85
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jun 24 12:12:16 2008 -0500
- ColdFire: Fix warning messages by passing correct data type in board.c
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 81cc32322acb1b3225ee45606ced48e2a14824dc
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu May 29 12:21:54 2008 -0500
- ColdFire: Fix UART baudrate formula
- The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
- can generate the wrong divisor due to integer division truncation.
- Round the calculated divisor value by adding 1/2 the baudrate
- before dividing by the baudrate.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit b578fb471444cbd7db1285701ba51343baaf73fb
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 11:38:26 2008 +0200
- ppc4xx: Fix include sequence in 4xx_pcie.c
- This patch now moves common.h to the top of the inlcude list. This
- is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
- the phys_size_t/phys_addr_t are defined to the correct size in this
- driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 11 13:10:56 2008 +0200
- ppc4xx: Fix compile warning in 44x_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 11 11:40:13 2008 +0200
- ppc4xx: Fix small korat merge problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1d0554736a0a1dd59718acda660871ce56b69e18
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 11 11:34:52 2008 +0200
- ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3a82113ed5934d498f25080441a8261fc9454b15
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 16:37:09 2008 +0200
- ppc4xx: Add 460SX UIC defines
- Only the really needed ones are added (cascading and EMAC/MAL).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 26173fc6f60521c2a8072f652f863617fc11ba9a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 30 14:11:07 2008 +0200
- ppc4xx: Continue cleanup of ppc440.h
- This patch continues the ppc440.h cleanup by removing some of the unused
- defines.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d9056b7913ed6a228d2f33671d916efedee541dd
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 30 14:05:05 2008 +0200
- ppc4xx: Cleanup Katmai & Yucca PCIe register usage
- This patch cleans up the 440SPe PCIe register usage. Now only defines
- from the include/asm-ppc/4xx_pcie.h are used.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5de851403b01489b493fa83137ad990b8ce60d1c
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jun 26 17:36:39 2008 +0200
- ppc4xx: Rework 440GX UIC handling
- This patch reworks the 440GX interrupt handling so that the common 4xx
- code can be used. The 440GX is an exception to all other 4xx variants
- by having the cascading interrupt vectors not on UIC0 but on a special
- UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
- the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
- handling is simpler without any 440GX special cases.
- Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d1631fe1a05b063ccaf62ea892a8887b829847d1
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jun 26 13:40:57 2008 +0200
- ppc4xx: Consolidate PPC4xx UIC defines
- This 2nd patch now removes all UIC mask bit definition. They should be
- generated from the vectors by using the UIC_MASK() macro from now on.
- This way only the vectors need to get defined for new PPC's.
- Also only the really used interrupt vectors are now defined. This makes
- definitions for new PPC versions easier and less error prone.
- Another part of this patch is that the 4xx emac driver got a little
- cleanup, since now the usage of the interrupts is clearer.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jun 25 10:59:22 2008 +0200
- ppc4xx: Consolidate PPC4xx UIC defines
- This patch is the first step to consolidate the UIC related defines in the
- 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
- asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
- steps.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7ee2619c20ccecd57966d74d844e6329e141261c
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 24 17:18:50 2008 +0200
- ppc4xx: Consolidate PPC4xx EBC defines
- This patch removes all EBC related defines from the PPC4xx headers
- ppc405.h and ppc440.h and introduces a new header
- include/asm-ppc/ppc4xx-ebc.h
- with all those defines.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e321801bed5a6d896d298c00fd20046f039d5d66
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 13:52:44 2008 +0200
- ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
- This patch removes some ft_board_setup() functions from some 4xx boards.
- This can be done since we now have a default weak implementation for this
- in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
- implementation like canyonlands need their own version.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 08250eb2edbd96514d049602d9e134110ac3185f
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 15:32:32 2008 +0200
- ppc4xx: Fix merge problems in 44x_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Tue Jul 8 08:35:00 2008 -0700
- ppc4xx: Add MII mode support to the EMAC RGMII Bridge
- This patch adds support for placing the RGMII bridge on the
- PPC405EX(r) into MII/GMII mode and allows a board-specific
- configuration to specify the bridge mode at compile-time.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed Jul 9 16:46:35 2008 -0700
- ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
- This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
- controller registers (MODT and INITPLR) used by the
- PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
- peer values used for the INITPLR MR and EMR registers,
- respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
- With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
- Kilauea are replaced by equivalent mnemonics to make it easier to
- compare and contrast other 405EX(r)-based boards (e.g. during board
- bring-up).
- Finally, unified the SDRAM controller register dump routine such that
- it can be used across all processor variants that utilize the IBM DDR2
- SDRAM controller core. It produces output of the form:
- PPC4xx IBM DDR2 Register Dump:
- ...
- SDRAM_MB0CF[40] = 0x00006701
- ...
- which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
- since it is not uncommon that the DCR values in header files get mixed
- up and it helps to validate, at a glance, they match what is printed
- in the user manual.
- Tested on:
- AMCC Kilauea/Haleakala:
- - NFS Linux Boot: PASSED
- - NAND Linux Boot: PASSED
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ad7382d828982e9c1bafc4313ef1b666f6145f58
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed Jul 9 16:31:59 2008 -0700
- ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
- Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
- revision ID DCR based on 405EX, and add field mnemonics for bus error
- status and ECC error status registers.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed Jul 9 16:31:36 2008 -0700
- ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
- This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5b457d00730d4aa0c6450d21a9104723e606fb98
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed Jul 9 11:55:46 2008 -0700
- PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
- While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
- controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
- the 405EX(r), SDRAM_MCSTAT has a different DCR value.
- Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
- which causes SDRAM initialization to periodically fail since it can
- prematurely indicate SDRAM ready status.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
- Author: Feng Kan <fkan@amcc.com>
- Date: Tue Jul 8 22:48:42 2008 -0700
- ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
- Add AMCC Redwood reference board that uses the latest
- PPC 464 CPU processor combined with a rich mix of peripheral
- controllers. The board will support PCIe, mutiple Gig ethernet
- ports, advanced hardware RAID assistance and IEEE 1588.
- Signed-off-by: Feng Kan <fkan@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
- Author: Feng Kan <fkan@amcc.com>
- Date: Tue Jul 8 22:48:07 2008 -0700
- ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
- Signed-off-by: Feng Kan <fkan@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7d30793685efcada183891c78fc892e6c9ba50c7
- Author: Feng Kan <fkan@amcc.com>
- Date: Tue Jul 8 22:47:31 2008 -0700
- ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
- Signed-off-by: Feng Kan <fkan@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 11 01:16:00 2008 +0200
- Fix some more print() format errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fdd70d1921b87287d9a99d1be99bc35226c2b412
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Jul 10 20:57:54 2008 +0200
- MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
- Author: Sergey Lapin <slapin@ossfans.org>
- Date: Thu Jun 5 11:06:29 2008 +0400
- DataFlash AT45DB021 support
- Some boards based on AT91SAM926X-EK use smaller DF chips to keep
- bootstrap, u-boot and its environment, using NAND or other external
- storage for kernel and rootfs. This patch adds support for
- small 1024x263 chip.
- Signed-off-by: Sergey Lapin <slapin@ossfans.org>
- commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Jul 10 14:00:15 2008 -0500
- silence misc printf formatting compiler warnings
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Thu Jul 10 14:47:09 2008 +0200
- USB: shutdown USB before booting
- This patch fixes a potentially serious issue related to USB which was
- discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
- ARM920T. Martin wrote:
- Turn off USB to prevent the host controller from writing to the
- SDRAM while Linux is booting. This could happen, because the HCCA
- (Host Controller Communication Area) lies within the SDRAM and the
- host controller writes continously to this area (as busmaster!), for
- example to increase the HccaFrameNumber variable, which happens
- every 1 ms.
- This is a slightly modified version of the patch in order to shutdown
- USB when booting on all architectures.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
- Author: Martha Marx <mmarx@silicontkx.com>
- Date: Thu May 29 14:23:25 2008 -0400
- Configuration changes for ADS5121 Rev 3
- ADS5121 Rev 3 board is now the default config
- config targets are now
- ads5121_config
- Rev 3 board with
- PCI
- M41T62 on board RTC
- 512MB DRAM
- ads5121_rev2_config
- Rev 2 board with
- No PCI
- 256MB DRAM
- Signed-off-by: Martha Marx <mmarx@silicontkx.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
- Author: Martha Marx <mmarx@silicontkx.com>
- Date: Thu May 29 15:37:21 2008 -0400
- Consolidate ADS5121 IO Pin configuration
- Consolidate ADS5121 IO Pin configuration to one file
- board/ads5121/iopin.c.
- Remove pin config from cpu/mpc512x/fec.c
- Signed-off-by: Martha Marx <mmarx@silicontkx.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
- Author: Christian Eggers <christian@p2400.wgnetz.xx>
- Date: Fri Jun 27 19:46:51 2008 +0200
- Fix "usb part" command
- Only print partition for selected device if user supplied the <dev>
- arg with the "usb part [dev]" command.
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit cc83b27217f7380041fea386ddb6d6d9b261617d
- Author: Harald Welte <laforge@gnumonks.org>
- Date: Mon Jul 7 00:58:05 2008 +0800
- fix USB devices with multiple configurations
- This patch fixes bugs in usbdcore*.c related to the use of devices
- with multiple configurations.
- The original code made mistakes about the meaning of configuration value and
- configuration index, and the resulting off-by-one errors resulted in:
- * SET_CONFIGURATION always selected the first configuration, no matter what
- wValue is being passed.
- * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
- configuration (index 0).
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit 06c53beae1a726e707971c555613f09b270a2461
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 10 13:16:09 2008 +0200
- Fix some more print() format errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
- Author: Christian Eggers <christian@p2400.wgnetz.xx>
- Date: Fri Jun 27 19:46:51 2008 +0200
- Fix "usb part" command
- Only print partition for selected device if user supplied the <dev>
- arg with the "usb part [dev]" command.
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
- Author: Harald Welte <laforge@gnumonks.org>
- Date: Mon Jul 7 00:58:05 2008 +0800
- fix USB devices with multiple configurations
- This patch fixes bugs in usbdcore*.c related to the use of devices
- with multiple configurations.
- The original code made mistakes about the meaning of configuration value and
- configuration index, and the resulting off-by-one errors resulted in:
- * SET_CONFIGURATION always selected the first configuration, no matter what
- wValue is being passed.
- * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
- configuration (index 0).
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit e870690bdca154943ecadd5212d2d59c1b9d391b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 10:10:54 2008 +0200
- MTD/NAND: Fix printf format warning in nand code
- This patch fixes NAND related printf format warning. Those warnings are
- now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
- [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
- really helpful.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 10:00:45 2008 +0200
- rtc: Fix printf format warning in m41t60.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 8 12:01:47 2008 +0200
- pci: Move PCI device configuration check into a separate weak function
- This patch moves the check, if a device should be skipped in PCI PNP
- configuration into the function pci_skip_dev(). This function is defined
- as weak so that it can be overwritten by a platform specific one if
- needed. The check if the device should get printed in the PCI summary upon
- bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
- pci_print_dev() which is also defined as weak too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b002144e1dc21374b1ef5281fe6b5d014af96650
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 09:58:06 2008 +0200
- ppc4xx: Fix printf format warnings now visible with the updated format check
- This patch fixes ppc4xx related printf format warning. Those warnings are
- now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
- [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
- really helpful.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 9 17:33:57 2008 +0200
- ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
- Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
- To support such configurations, we "only" map the first 2GB via the TLB's. We
- need some free virtual address space for the remaining peripherals like, SoC
- devices, FLASH etc.
- Note that ECC is currently not supported on configurations with more than 2GB
- SDRAM. This is because we only map the first 2GB on such systems, and therefore
- the ECC parity byte of the remaining area can't be written.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cf1c2ed91df26903b956948f37f82de9e1158a89
- Author: Larry Johnson <lrj@acm.org>
- Date: Sat Jun 14 17:02:49 2008 -0400
- ppc4xx: Remove implementation of testdram() from Korat board support
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
- Author: Larry Johnson <lrj@acm.org>
- Date: Sat Jun 14 16:53:02 2008 -0400
- ppc4xx: Update and add FDT to Korat board support
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4188f0491886b3b486164e819c0a83fdb97efd7d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 10 01:13:30 2008 +0200
- Minor coding style cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8915f1189c1d29d8be7f4de325702d90a8988219
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Wed Jul 9 17:50:45 2008 -0400
- e1000: add support for 82545GM 64bit PCI-X copper variant
- This PCI-X e1000 variant works by just adding in the correct
- PCI IDs in the appropriate places.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Jul 9 12:34:11 2008 +0000
- SPARC: Build error fix
- (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
- This patch makes SPARC targets build again. It is caused by
- phys_addr_t and phys_size_t being defined in the wrong header
- file. include/lmb.h need those typedefs to build.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 11ccc33fa21acce108f6b4a6936e3271af904c64
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Wed Jul 9 08:17:15 2008 +0200
- Many spelling fixes in README.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit dbab0691d2533560f7e91b92ae844046a9ad1df3
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Wed Jul 9 08:17:06 2008 +0200
- Minor spelling fix in comment.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Jul 8 14:54:58 2008 -0400
- Round the serial port clock divisor value returned by calc_divisor()
- Round the serial port clock divisor value returned by
- calc_divisor().
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: John Roberts <john.roberts@pwav.com>
- commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Jul 9 17:47:52 2008 -0500
- NAND: ifdef-protect most of nand.h when using legacy NAND.
- Some macros such as NAND_CTL_SETALE conflict between current and legacy
- NAND, being defined by the subsystem in the former case and the board
- config file in the latter.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Jul 8 11:02:05 2008 -0400
- ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
- ARM: Fix for incorrect version of patch applied when
- adding support for the Lyrtech SFF-SDR board.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
- commit 47042b363ee5022b8180c65d3f4558e7972c79cd
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Jul 8 09:08:40 2008 +0900
- Remove useless print message at apollon
- Remove useless print message at apollon
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 7 14:24:39 2008 -0500
- Fix LMB type issues
- The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
- of casting problems in the bootm code that called the LMB functions.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 7 09:39:06 2008 -0500
- Fix compiler warnings
- gcc-4.3.x generates the following:
- bootm.c: In function 'do_bootm_linux':
- bootm.c:208: warning: cast from pointer to integer of different size
- bootm.c:215: warning: cast from pointer to integer of different size
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
- Author: Harald Welte <laforge@gnumonks.org>
- Date: Mon Jul 7 15:40:39 2008 +0800
- Remove code duplication for setting the default environment
- common/env_common.c (default_env): new function that resets the environment to
- the default value
- common/env_common.c (env_relocate): use default_env instead of own copy
- common/env_nand.c (env_relocate_spec): use default_env instead of own copy
- include/environment.h: added default_env prototype
- Signed-off-by: Werner Almesberger <werner@openmoko.org>
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit 99c2b434d37863df5dda5207a53760c6506fc2be
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Sun Jun 22 16:13:46 2008 +0200
- NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
- The writeenv() and readenv() calls introduced by the recently added bad block
- management for environment variables were missing casts therefore producing
- compile time warnings.
- While at it fixing some typo in a comment and indentation.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
- Author: Scott Wood <scottwood@freescale.com>
- Date: Fri Jun 20 12:38:57 2008 -0500
- NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
- This is particularly problematic now that non-NAND-specific code is
- including <nand.h>, and thus all debugging code is being compiled
- regardless of whether it was requested, as reported by Scott McNutt
- <smcnutt@psyent.com>.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Jun 12 19:27:58 2008 +0200
- mmc: Move atmel_mci driver into drivers/mmc
- This makes it easier to use the driver on other platforms.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Jun 12 19:27:57 2008 +0200
- avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
- After we move the atmel_mci driver into drivers/mmc, we can't select
- it with CONFIG_MMC anymore. Introduce a new symbol specifically for
- this driver so that there's no ambiguity.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5ce13051a48c62bda9723df3b4778c492fb47f36
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Jun 12 19:27:56 2008 +0200
- Create drivers/mmc subdirectory
- In order to consolidate more of the various MMC drivers around the
- tree, we must first have a common place to put them.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b502611b51f02718c2d1117d4981dabceb5af6de
- Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
- Date: Sun Jul 6 12:30:09 2008 +0200
- Change env_get_char from a global function ptr to a function
- This avoids an early global data reference.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit 27269417ade432189b234d9fbac98b54e37b978c
- Author: Matvejchikov Ilya <matvejchikov@gmail.com>
- Date: Sun Jul 6 13:57:58 2008 +0400
- Some copy-n-paste fixes in printf usage
- Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
- commit 0e6989b9faf1588e8723535539e88a0df3c71356
- Author: Matvejchikov Ilya <matvejchikov@gmail.com>
- Date: Sun Jul 6 13:57:00 2008 +0400
- FDT memory and pci node fixes for MPC8260ADS
- Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
- commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
- Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Date: Mon Jul 7 06:41:14 2008 -0700
- Fix printf errors.
- The compiler will help find mismatches between printf formats and
- arguments if you let it. This patch adds the necessary attributes to
- declarations in include/common.h, then begins to correct the resulting
- compiler warnings. Some of these were bugs, e.g., "$d" instead of
- "%d" and incorrect arguments. Others were just annoying, like
- int-long mismatches on a system where both are 32 bits. It's worth
- fixing the annoying errors to catch the real ones.
- Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- commit 417faf285b2527acb2de24c5cd3e2621d385408c
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jul 9 11:09:41 2008 -0500
- Allow print_size to print in GB
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit e7c374529c87525c9aa463e0557c287887ae4e9e
- Author: Jason McMullan <mcmullan@netapp.com>
- Date: Sun Jun 8 23:56:00 2008 -0400
- mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
- Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
- they are set in the U-Boot environment.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 0192d7d56e9320819dea262f49789ae18fdd2c72
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 8 12:57:14 2008 +0200
- jedec_flash: Fix AM29DL800BB device ID
- As pointed out by Jerry Hicks, this patch corrects the device ID of
- the Spansion AM29DL800BB NOR device. Verified against latest Spansion
- datasheet (rev C4 from Dezember 2006).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Mon Jul 7 11:22:37 2008 +0900
- sh: Fix compile error sh7763rdp board
- Disable SH ether driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jul 8 12:03:24 2008 +0900
- sh: Fix SH-boards compile error
- By Cleanup out-or-tree building for some boards (.depend)
- (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
- because filse ware changed, some SH-boards have compile error.
- I revised this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Tue May 13 11:50:36 2008 +0800
- Feed the watchdog in u-boot for 8610 board.
- The watchdog on 8610 board is enabled by setting sw[6]
- to on. Once enabled, the watchdog can not be disabled
- by software. So feed the dog in u-boot is necessary for
- normal operation.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Wed Jun 18 12:10:33 2008 -0400
- Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
- Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
- Remove duplicate code in a if/else block in
- cpu/arm926ejs/davinci/lxt972.c.
- Fixed style issues.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fec61431a003f5778bafa2624073a571af8bec9f
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Wed Jun 18 12:10:31 2008 -0400
- Remove duplicate definitions in include/lxt971a.h.
- Remove duplicate definitions in include/lxt971a.h.
- Remove duplicate registers and bits definitions in
- include/lxt971a.h for standard MII registers, and
- use values in include/miiphy.h instead.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 9751ee0990f467941da0b095a4e995f863672d7a
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Wed Jun 11 21:05:00 2008 +0900
- net: sh: Renesas SH7763 Ethernet device support
- Renesas SH7763 has 2 channel Ethernet device.
- This is 10/100/1000 Base support.
- But this patch check 10/100 Base only.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:28:05 2008 +0900
- sh: Update Renesas R2DPlus board
- New NOR Flash board support and remove old type flash board config.
- And Remove network setting from config file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:28:01 2008 +0900
- sh: Update Renesas R7780MP board
- New NOR Flash board support and remove network setting from config file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c001cd604e9f133743effbddb1c215b48e761c5a
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:56 2008 +0900
- sh: Update Renesas Migo-R board
- Remove network setting from config file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:52 2008 +0900
- sh: Update Hitachi MS7722SE board
- Remove network setting from config file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 26209e48e8791670c93108029a5c31a30016c6df
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:48 2008 +0900
- sh: Cleanup source code of SH7763RDP
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 5cd5b2c96ef0025762931349d350287aec03ab47
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:44 2008 +0900
- sh: Cleanup source code of R2DPlus
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:41 2008 +0900
- sh: Cleanup source code of R7780MP
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:38 2008 +0900
- sh: Cleanup source code of MS7722SE
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:34 2008 +0900
- sh: Cleanup source code of MS7720SE
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3ab4827cbe409488ebea1a2ee5094783f2672214
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 7 00:45:03 2008 +0200
- SH: fix out of tree building
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9047bfa1e737d787be460387dd6f45737eeceb10
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Jul 3 23:16:06 2008 +0900
- net: smc911x: Fix typo
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Wed Jul 2 18:54:08 2008 +0200
- update mvBL-M7 board config
- update mvBL-M7 config file to use UBOOT_VERSION and define
- CONFIG_HIGH_BATS.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Mon Jun 30 17:45:01 2008 +0900
- net: fix compile problem in smc911x driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- commit 9fea65a6c469b1b474b27446feb58738baba2d31
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue Jun 24 09:54:09 2008 +0200
- ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
- This change helps with better handling with others
- Xilinx based platform.
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- Acked-by: Stefan Roese <sr@denx.de>
- commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jun 17 13:07:11 2008 +0900
- net: ne2000: Move dev_addr variable from grobal to local.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jun 17 13:07:15 2008 +0900
- net: ne2000: Fix compile error of NE2000
- If enable DEBUG, can not compile ne2000 driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Mon Jun 23 22:57:27 2008 -0700
- Add mechanisms for CPU and board-specific Ethernet initialization
- This patch is the first step in cleaning up net/eth.c, by moving Ethernet
- initialization to CPU or board-specific code. Initial implementation is
- only on the Freescale TSEC controller, but others will be added soon.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 7754f2be5d1835d263aad21b5a629526f3e680b0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 6 01:21:46 2008 +0200
- include/sha256.h: fix file permissions.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
- Author: Patrice Vilchez <patrice.vilchez@atmel.com>
- Date: Tue May 27 11:15:29 2008 +0200
- [AT91SAM9] Fix NAND FLASH timings
- Fix NAND FLASH timings for at91sam9x evaluation kits.
- New timings are based on application note
- "NAND Flash Support on AT91SAM9 Microcontrollers" available at
- http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
- Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Acked-by: Stelian Pop <stelian@popies.net>
- commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 22 00:15:40 2008 +0200
- Fix boot from NOR due to incorrect reset delay.
- AT91 RSTC registers are battery-backuped, so their values
- are not reset across power cycles. One of those registers,
- the AT91_RSTC_MR register, is being modified by U-Boot, in
- the ethernet initialisation routine, to generate a 500ms
- user reset.
- Unfortunately, this value is not being restored afterwards,
- causing subsequent resets to also last for 500ms.
- This long reset sequence causes problems (at least) in the
- boot sequence from NOR: by the time the CPU tries to load
- a program from the NOR flash, the latter is still in reset
- and not yet available.
- Additionaly, this patch fixes a bug in the original code which
- caused the reset delay to last for 2s instead of 500ms.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f492dd636fbbae529e17533995bc6e5813c007f6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 4 20:11:49 2008 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 4 20:07:35 2008 +0200
- CCM/SCM boards: fix out of tree building
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ab4c3a490df9a964711556d2a05b0c787db45fde
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 23:22:27 2008 +0200
- SCM board: fix build errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a566466f17ba0e2d2b6c250e77da678fb932470d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 23:06:36 2008 +0200
- IAD210 board: fix ``"ALIGN" redefined'' warning.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ad756314797c16fa5dca23e115aab881011f164f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 23:00:24 2008 +0200
- CCM board: fix build errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Wed Jul 2 18:54:08 2008 +0200
- update mvBL-M7 board config
- update mvBL-M7 config file to use UBOOT_VERSION.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ced209c50e80c25f13c083099b05044048d21f4f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 22:39:21 2008 +0200
- sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 22:34:08 2008 +0200
- Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 730f298485984b011b6ee8f4acb511cb45a843dd
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 22:04:17 2008 +0200
- lmb: fix "implicit declaration of function 'lmb_free'" warning
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 322ef5e28d2dc62571afc699b00add22a8e006e4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 2 23:53:23 2008 +0200
- Cleanup: remove redundant deleting on *~ files
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c8a3b109f07f02342d097b30908965f7261d9f15
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 2 23:49:18 2008 +0200
- Cleanup out-or-tree building for some boards (.depend)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 2 23:38:50 2008 +0200
- Cleanup: fix out-of-tree building for some boards
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 461fa68d20861811487944d22291db5a13410e20
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 2 23:00:14 2008 +0200
- Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5981ebd32017e062b08aa6747cf591276f2db779
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Jun 20 22:26:24 2008 +0200
- fdt: Fix typo in variable name.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
- Author: Gary Jennejohn <garyj@denx.de>
- Date: Thu Jun 19 11:11:19 2008 +0200
- Add logos for RRvision board
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
- Author: Esben Haabendal <EsbenHaabendal@gmail.com>
- Date: Wed Jun 18 11:03:57 2008 +0200
- mpc8260: add fdt_fixup_ethernet support
- Add support for updating mac-address and local-mac-address in fdt for
- all MPC8260 targets.
- Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
- commit f6a69559d64498a04e1e0b087a9b920e5775f866
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Thu Jun 12 13:24:42 2008 -0400
- cmd_nvedit.c: clean up syntax highlighting
- My text-editor (vim) has a bit of trouble syntax-highlighting the
- cmd_nvedit.c file, because it apparently does not parse C
- ifdef/else/endif. The following patch does not change the behavior of
- the code at all, but does allow the editor to properly
- syntax-highlight the file.
- Signed-off-by: Steve Falco <sfalco@harris.com>
- commit 75678c807a6272ecc5541eb32898c93887f08400
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Thu Jun 12 13:22:12 2008 -0400
- Make setenv() return status
- Currently, the setenv function does not return an error code.
- This patch allows to test for errors.
- Signed-off-by: Steve Falco <sfalco@harris.com>
- commit 4928e97c8531283ca9b368b7c29a8a12e726562a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jun 11 10:14:06 2008 -0500
- PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
- fls64, __ilog2_u64, ffs64 are variants that work on an u64,
- and fls is used to implement them.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 83002a77cbdf383015ca384eff5fa31722d8e571
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Mon Jun 9 22:58:48 2008 +0200
- i.MX31: Cleanup comments in lowlevel_init.S.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Jun 8 23:28:33 2008 -0700
- Move conditional compilation of MPC8XXX SPI driver to Makefile
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d92ea21bafb674ee2bf27447970b047845e7b0a2
- Author: Juergen Kilb <J.Kilb@gmx.de>
- Date: Sun Jun 8 17:59:53 2008 +0200
- i.MX31: fixed CTRL-C detection
- The Register URXD contains status information in bits [15..8].
- With status bit 15 set, CTRL-C was reported as 0x8003 instead
- of 0x03. Therefore CTRL-C was not detected.
- To solve this, bits [15..8] were masked out now.
- Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
- Acked-by: Felix Radensky <felix@embedded-sol.com>
- commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 1 17:03:19 2008 +0200
- ppc4xx: Fix 460EX/GT PCIe port initialization
- This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
- configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
- this out.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b571afde0295b007a45055ee49f8822c753a5651
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Jun 7 12:29:52 2008 +0200
- add SHA256 support
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
- commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Jun 6 23:07:40 2008 +0200
- Delay FIT format check on sector based devices
- Global FIT image operations like format check cannot be performed on
- a first sector data, defer them to the point when whole FIT image was
- uploaded to a system RAM.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
- NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
- commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Jun 3 17:38:19 2008 +0800
- sata: wait for device updating signature to host
- The driver need wait for the device updating signature to host.
- If we don't wait for it, the driver can not detect the device(disk)
- when the system powers up.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jun 28 14:56:17 2008 +0200
- ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
- This patch implements a fix provided by AMCC so that the lockup upon
- simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
- anymore:
- Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
- (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
- USB 2.0 host and SATA.
- This errata is not officially available yet. I'll update the comment
- to add the errata number later.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8b616edb118e37d05f6401389eaee1c636b22828
- Author: Stuart Wood <stuart.wood@labxtechnologies.com>
- Date: Mon Jun 2 16:42:19 2008 -0400
- serial_pl010.c: add watchdog support
- Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
- commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
- Author: Stuart Wood <stuart.wood@labxtechnologies.com>
- Date: Mon Jun 2 16:40:08 2008 -0400
- jffs2_1pass.c: add watchdog support
- Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
- commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
- Author: Sascha Laue <sascha.laue@liebherr.com>
- Date: Fri May 30 09:48:14 2008 +0200
- Configure DSP POST; add watchdog reset to diag command
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- commit f13526517859bf6b573e23ff47199e107d1009b5
- Author: Tor Krill <tor@excito.com>
- Date: Thu May 29 10:40:17 2008 +0200
- Add sata sil3114 support
- Signed-off-by: Tor Krill <tor@excito.com>
- commit e093a247628228100f405b6d7f6b1bfc16141938
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jun 28 23:34:37 2008 +0200
- Coding Style Cleanup
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jun 28 23:16:01 2008 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Wed May 21 13:58:41 2008 -0400
- ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
- This patch adds support for the Lyrtech SFF-SDR board,
- based on the TI DaVinci architecture (ARM926EJS).
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Philip Balister <philip@balister.org>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 341188b9ccaa8d4462d772cc067aca8d7618633a
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu May 22 11:09:59 2008 +0200
- MMC: Consolidate MMC/SD command definitions
- This moves the MMC and SD Card command definitions from
- include/asm/arch/mmc.h into include/mmc.h. These definitions are
- given by the MMC and SD Card standards, not by any particular
- architecture.
- There's a lot more room for consolidation in the MMC drivers which
- I'm hoping to get done eventually, but this patch is a start.
- Compile-tested for all avr32 boards as well as lpc2292sodimm and
- lubbock. This should cover all three mmc drivers in the tree.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit fa60edfc4c952626e048c0e065f654b3c1822fa5
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Wed May 21 14:38:08 2008 +0900
- Use better Ethernet timings for apollon board
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 41c5eaa7253ed82bbae1eda5667755872c615164
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jun 16 13:58:56 2008 -0500
- Resize device tree to allow space for board changes and the chosen node
- Current code requires that a compiled device tree have space added to the end to
- leave room for extra nodes added by board code (and the chosen node). This
- requires that device tree creators anticipate how much space U-Boot will add to
- the tree, which is absurd. Ideally, the code would resize and/or relocate the
- tree when it needed more space, but this would require a systemic change to the
- fdt code, which is non-trivial. Instead, we resize the tree inside
- boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
- where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7570a9941fc565922078679a72d246fe208d696d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jun 16 13:58:55 2008 -0500
- Fix an underflow bug in __lmb_alloc_base
- __lmb_alloc_base can underflow if it fails to find free space. This was fixed
- in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
- merely updates __lmb_alloc_base to resemble the current version in Linux.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jun 16 13:58:54 2008 -0500
- Add lmb_free
- lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
- lmb_reserve to temporarily reserve some memory.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jun 16 13:58:53 2008 -0500
- Add ALIGN() macro
- ALIGN() returns the smallest aligned value greater than the passed
- in address or size. Taken from Linux.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 24 17:15:22 2008 +0200
- ppc4xx: Fix compilation problems with phys_size_t
- This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
- board specific files where it has been missing.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 28eab0d77352b84885f938759bf2612b7bf0bc44
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon May 19 12:26:38 2008 +0200
- Conditionally add -fno-stack-protector to CFLAGS
- When compile-testing on powerpc, I get errors like this:
- net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
- This seems to be because -fstack-protector is on by default, so
- let's explicitly disable it on all architectures that support the
- option.
- The Ubuntu toolchain is affected by this problem, and according to
- Mike Frysinger, Gentoo has been running with SSP enabled for years.
- More and more distros are turning SSP on by default, so this problem
- is likely to get worse in the future.
- Also, powerpc just happens to be one of the arches I do
- compile-testing on. There may be other arches affected by this too.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:52 2008 +0200
- pcmcia/ti_pci1410a: Move compile condition to the Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:51 2008 +0200
- pxa_pcmcia: Move compile condition to the Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:50 2008 +0200
- marabun_pcmcia: Move compile condition to the Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6a19c46cae43c16c528eddefae3db97134f1915d
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Mon Jun 23 13:25:34 2008 +0200
- fix non-working mvBL-M7
- Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 846f1574ddddeda2bc227655e687308695f41cdc
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Mon Jun 23 11:40:56 2008 +0200
- fix system config overwrite @ MPC834x and MPC8313
- During 83xx setup the "System I/O configuration register high" gets
- overwritten with user defined value if CFG_SICRH is defined.
- Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
- must keep their reset value regardless of configuration.
- On my board (using RGMII) those bits are set after reset - yet it's
- unclear where they come from.
- The patch keeps both bits on MPC834x and MPC8313.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jun 17 17:45:27 2008 -0500
- mpc83xx: move CPU_TYPE_ENTRY over to processor.h
- to avoid this:
- cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
- In file included from cpu.c:33:
- /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 23 11:15:09 2008 +0200
- ppc4xx: Fix problem in gpio_config()
- As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
- left by one. So the additional shift is bogus.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 40777812316fc252c941665c0f60c148fd79d50f
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Jun 20 22:24:05 2008 +0200
- fdt: Fix typo in variable name.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 5f723a3b98c630bde33de74351f2121691fdef14
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri Jun 20 10:41:05 2008 +0200
- avr32: Enable SPI flash support on ATNGW100
- The ATNGW100 has 8MB DataFlash on board. Give users access to it through
- the new SPI flash framework.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri Jun 20 12:44:28 2008 +0200
- avr32: Fix SPI portmux initialization
- Use the new GPIO manipulation functions to set up the chip select lines,
- and make sure both busses use GPIO for chip select control.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
- Author: Peter Ma <pma@mediamatech.com>
- Date: Sun Jun 1 22:59:24 2008 -0700
- avr32: Add GPIO manipulation functions
- Adds GPIO manipulation functions for AVR32 AP7 platform.
- Signed-off-by: Peter Ma <pma@mediamatech.com>
- [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:02:30 2008 +0200
- MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
- This patch is based on the following patch sent a few minutes ago:
- "NAND FSL UPM: driver re-write using the hwcontrol callback"
- It is untested, of course. Anton, could you please give it a try.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 96026d42fa4e646d28318c0a1438aac4b2017909
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Jun 12 12:40:11 2008 +0200
- Fix 4xx build issue
- Building for 4xx doesn't work since commit 4dbdb768:
- In file included from 4xx_pcie.c:28:
- include/asm/processor.h:971: error: expected ')' before 'ver'
- make[1]: *** [4xx_pcie.o] Error 1
- This patch fixes the problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Acked-by: Stefan Roese <sr@denx.de>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit a036b0443657fe0f4773786de9092251869f08ac
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jun 19 01:45:50 2008 -0500
- MPC8610HPCD: Report board id, board version and fpga version.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jun 19 01:45:27 2008 -0500
- MPC8641HPCN: Report board id, board version and fpga version.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 16 10:40:02 2008 +0200
- cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
- This patch simplifies flash_toggle() (AMD commandset), which is used to
- detect if a FLASH device is still busy with erase/program operations. On
- 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
- did not detect the busy state reliably, resulting in non erased sectors
- etc. This patch now simplifies this function by "just" comparing the
- complete data-word instead of ANDing it with the command-word (0x40)
- before the compatison. It is done the same way in the Linux implementation
- chip_ready() in cfi_cmdset_0002.c.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
- Author: Philip Balister <philip@balister.org>
- Date: Mon Jun 16 08:58:07 2008 -0400
- NAND: Add missing declaration to non-redundant saveenv().
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Mon Jun 2 15:09:55 2008 +0200
- MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 10 15:34:11 2008 +0200
- ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
- This patch disables the square wave output of the M41T62 RTC used on
- Canyonlands & Glacier. Here the explanation:
- The serial real-time clock part used in the design is an
- STMicro M41T62. This part has a full-time 32KHz square wave
- output that is connected to the TmrClk input to the
- processor. The default state for this square wave output is
- enabled so the output runs continuously when the board is
- powered normally and also from the battery. The TmrClk input
- to the processor goes to ground when the power is removed
- from the board/processor, and therefore the running square
- wave output is driving ground which drains the battery quickly.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a94f22f08f280905926219e568568964cb9eeb9d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Jun 11 18:10:20 2008 -0500
- Fix build issue with string.h and linux/string.h
- This commit:
- commit 338cc038461a6c7709c5b86fd9a240209338a1ae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jun 6 14:28:14 2008 +0200
- tools/mkimage: fix compiler warnings on some systems.
- Broke building on some systems, because the host's string.h was interfering
- with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
- we're building for the host, so now we only include when building inside
- u-boot.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 9973e3c614721bbf169882ffc3be266a6611cd60
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Jun 9 16:03:40 2008 -0500
- Change initdram() return type to phys_size_t
- This patch changes the return type of initdram() from long int to phys_size_t.
- This is required for a couple of reasons: long int limits the amount of dram
- to 2GB, and u-boot in general is moving over to phys_size_t to represent the
- size of physical memory. phys_size_t is defined as an unsigned long on almost
- all current platforms.
- This patch *only* changes the return type of the initdram function (in
- include/common.h, as well as in each board's implementation of initdram). It
- does not actually modify the code inside the function on any of the platforms;
- platforms which wish to support more than 2GB of DRAM will need to modify
- their initdram() function code.
- Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
- MPC8641HPCN.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 391fd93ab23e15ab3dd58a54f5b609024009c378
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Jun 9 20:37:18 2008 -0500
- Change lmb to use phys_size_t/phys_addr_t
- This updates the lmb code to use phys_size_t
- and phys_addr_t instead of unsigned long. Other code
- which interacts with this code, like getenv_bootm_size()
- is also updated.
- Booted on MPC8641HPCN, build-tested ppc, arm, mips.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 61b09fc2952dc636017df4e7970e3de132276ba1
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Jun 9 20:37:17 2008 -0500
- Change print_size to take phys_size_t
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Jun 9 20:37:16 2008 -0500
- Change bd/gd memsize/ram_size to be phys_size_t.
- Currently, both are defined as an unsigned long, but
- should be phys_size_t. This should result in no real change,
- since phys_size_t is currently an unsigned long for all the
- default configs. Also add print_lnum to cmd_bdinfo to deal
- with the potentially wider memsize.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit ba04f7010958e88a8910f2a123fee53fdc72e013
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jun 10 16:16:02 2008 -0500
- FSL LAW: Add new interface to use the last free LAW
- LAWs have the concept of priority so its useful to be able to allocate
- the lowest (highest number) priority. We will end up using this with the
- new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 859a86a25c569d3665ff413d1d923394b8a961f3
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jun 11 00:51:45 2008 -0500
- 85xx/86xx: Move to dynamic mgmt of LAWs
- With the new LAW interface (set_next_law) we can move to letting the
- system allocate which LAWs are used for what purpose. This makes life
- a bit easier going forward with the new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- Acked-by: Becky Bruce <becky.bruce@freescale.com>
- commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jun 11 00:44:10 2008 -0500
- FSL LAW: Keep track of LAW allocations
- Make it so we keep track of which LAWs have allocated and provide
- a function (set_next_law) which can allocate a LAW for us if one is
- free.
- In the future we will move to doing more "dynamic" LAW allocation
- since the majority of users dont really care about what LAW number
- they are at.
- Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit ddde74a159caa6e18b481fec01d40b885aebb566
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jun 9 22:31:57 2008 -0500
- 85xx: remove dummy board_early_init_f
- A number of board ports have empty version of board_early_init_f
- for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 81e56e9af0d43712db8efb843606a8d62eab454f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jun 9 18:55:38 2008 -0500
- MPC8544DS: Update config.h
- * Enable flash progress
- * remove CLEAR_LAW0 since we dont really use it
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 978e81604c1b28526ed580df0fbe64eb8384e94f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jun 9 13:37:24 2008 -0500
- 85xx: Remove unused and unconfigured memory test code.
- Remove unused and unconfigured DDR test code from FSL 85xx boards.
- Besides, other common code exists.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:45 2008 +0200
- Socrates: Added FPGA base address update in FDT.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:44 2008 +0200
- Socrates: NAND support added. Changed the U-Boot base address and
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 248ae5cfc8bf69074d1da099dc495d8e06070547
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:43 2008 +0200
- NAND: Added support for 128-bit OOB, adapted
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 31ca0208612f2eb57690110d7c2815953650e47b
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:42 2008 +0200
- Socrates: added missed file with UPMA configuration data.
- Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:41 2008 +0200
- Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:40 2008 +0200
- Added the upmconfig() function for 85xx.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d39e68514ff943930ee692cff3fde03532eb7fec
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:39 2008 +0200
- Socrates: config file cleanup.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit e8cc3f04b124f757af4528206e60d8eb715ae083
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:10 2008 +0200
- TQM85xx: Change memory map to support Flash memory > 128 MiB
- Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
- memory. The current memory map only supports up to 128 MiB Flash.
- This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
- set, up to 1 GiB flash is supported. To achieve this, the memory
- map has to be adjusted in great parts (for example the CCSRBAR is
- moved from 0xE0000000 to 0xA0000000).
- If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
- memory map also has to be considered in the kernel (changed
- CCSRBAR address, changed PCI IO base address, ...). Please use
- an appropriate Flat Device Tree blob (tqm8548.dtb).
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:09 2008 +0200
- TQM85xx: NAND support via local bus UPMB
- This patch adds support for NAND FLASH on the TQM8548. It is disabled by
- default and can be enabled for the TQM8548 modules. It is now based on
- the re-written FSL NAND UPM driver. A patch has been posted earlier today
- with the subject:
- "NAND FSL UPM: driver re-write using the hwcontrol callback"
- Note that the R/B pin is not supported by that module requiring to use
- the specified maximum delay time.
- Note: With NAND support enabled the size of the U-Boot image exceeds
- 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
- doubling the image size :-(.
- Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit b9e8078bb3f3c48111a7081e27279938c3a445e1
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:08 2008 +0200
- TQM8548: PCI express support
- This patch adds support for PCI express cards. The board support
- now uses common FSL PCI init code, for both, PCI and PCIe on all
- TQM85xx modules.
- Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:07 2008 +0200
- TQM8548: Basic support for the TQM8548 modules
- This patch adds basic support for the TQM8548 module from TQ-Components
- (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
- eTSEC 3 and 4
- Furthermore Flash buffer write has been enabled to speed up output to
- the Flash by approx. a factor of 10.
- Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 25991353204c78b094c3c1fec90182dcd607ab8f
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:06 2008 +0200
- TQM85xx: Support for Flat Device Tree
- This patch adds support for Linux kernels using the Flat Device Tree.
- It also re-defines the default environment settings for booting Linux
- with the FDT blob.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit d9ee843d54c54776e1fdb86336ce554906a87331
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:05 2008 +0200
- TQM85xx: Support for Intel 82527 compatible CAN controller
- This patch adds initialization of the UPMC RAM to support up to two
- Intel 82527 compatible CAN controller on the TQM85xx modules.
- Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 518d5cfe72916323c746af1647764459914f555f
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:04 2008 +0200
- TQM85xx: Bugfix in the SDRAM initialisation
- The CS0_BNDS register is now set according to the detected
- memory size.
- Signed-off-by Martin Krause <martin.krause@tqs.de>
- commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:03 2008 +0200
- TQM85xx: Fix chip select configuration for second FLASH bank
- This patch fixes the re-calculation of the automatic chip select
- configuration for boards with two populated FLASH banks.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:02 2008 +0200
- TQM85xx: Support for Spansion 'N' type flashes added
- The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
- than the formerly used 'M' types (S29GLxxxM series), so the flash layout
- needs to be changed -> new start address of the environment. The macro
- definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
- defined for boards with 'N' type flashes.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 5d5bd838f76eade22c0ea40a500389f924d0da36
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:01 2008 +0200
- TQM85xx: Fix CPM port pin configuration
- Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
- board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
- as serial interface anyway. Worse, on some board variants configuring the
- pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit b99ba1679e8cd51b023e67098c89e606e47137d2
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:00 2008 +0200
- TQM85xx: Various coding style fixes
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jun 10 22:15:58 2008 -0400
- libfdt: Move the working_fdt pointer to cmd_fdt.c
- The working_fdt pointer was declared in common/fdt_support.c but was
- not used there. Move it to common/cmd_fdt.c where it is used (it is
- also used in lib_ppc/bootm.c).
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jun 10 11:06:17 2008 -0500
- fdt: unshadow global working fdt variable
- differentiate with local variables of the same name by renaming the
- global 'fdt' variable 'working_fdt'.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Jun 10 18:49:34 2008 -0500
- socrates: Fix PCI clk fix patch
- The submitted patch seems to have been more up-to-date, but an older patch was
- already in the repository. This patch encompasses the differences
- Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:02:29 2008 +0200
- NAND FSL UPM: driver re-write using the hwcontrol callback
- This is a re-write of the NAND FSL UPM driver using the more universal
- hwcontrol callback (instead of the cmdfunc callback). Here is a brief
- list of furher modifications:
- - For the time being, the UPM setup writing the UPM array has been
- removed from the driver and must now be done by the board specific
- code.
- - The bus width definition in "struct fsl_upm_nand" is now in bits to
- comply with the corresponding Linux driver and 8, 16 and 32 bit
- accesses are supported.
- - chip->dev_read is only set if fun->dev_ready != NULL, which is
- required for boards not connecting the R/B pin.
- - A few issue have been fixed with MxMR bit manipulation like in the
- corresponding Linux driver.
- Note: I think the "io_addr" field of "struct fsl_upm" could be removed
- as well, because the address is already determined by
- "nand->IO_ADDR_[RW]", but I'm not 100% sure.
- This patch has been tested on a TQM8548 modules with the NAND chip
- Micron MT29F8G08FABWP.
- This patch is based on the following patches posted to this list a few
- minutes ago:
- PPC: add accessor macros to clear and set bits in one shot
- 83xx/85xx/86xx: add more MxMR local bus definitions
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 6beecfbb542992eede5831240cd58678274683a9
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:11:59 2008 +0200
- MPC85xx: Beautify boot output of L2 cache configuration
- The boot output is now aligned poperly with other boot output
- lines, e.g.:
- FLASH: 128 MB
- L2: 512 KB enabled
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 398415114f0a705163a14543e9fef03f734b1ffa
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Wed Jun 4 12:45:22 2008 +0200
- PPC: add accessor macros to clear and set bits in one shot
- PPC: add accessor macros to clear and set bits in one shot
- This patch adds macros from linux/include/asm-powerpc/io.h to clear and
- set bits in one shot using the in_be32, out_be32, etc. accessor functions.
- They are very handy to manipulate bits it I/O registers.
- This patch is required for my forthcoming FSL NAND UPM driver re-write and
- the support for the TQM8548 module.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 4677988c7edc070c3786d3db7994abeca3ab82a0
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Wed Jun 4 13:52:17 2008 +0200
- TQM: move TQM boards to board/tqc
- Move all TQM board directories to the vendor specific directory "tqc"
- for modules from TQ-Components GmbH (http://www.tqc.de).
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Mon Jun 2 12:09:30 2008 +0200
- 83xx/85xx/86xx: add more MxMR local bus definitions
- 83xx/85xx/86xx: add more MxMR local bus definitions
- This patch adds more macro definitions for the UPM Machine Mode Registers
- They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
- common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
- required for my forthcoming FSL NAND UPM driver re-write and the support
- for the TQM8548 module.
- This patch is based on the following two patches from Anton Vorontsov:
- http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
- http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
- I leave coding style violation fixes, code beautification and name
- corrections to somebody else ;-(.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit c8c5fc266e4499e283c293ccb972863156aa4134
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu May 29 18:14:56 2008 +0400
- 83xx/85xx: further localbus cleanups
- Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
- from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 42dbd667c88d496882d53e22656e89b654205492
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed May 28 18:20:15 2008 +0400
- 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
- This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
- use it on MPC85xx and MPC86xx processors.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu May 29 11:22:06 2008 -0500
- 85xx: Add setting of cache props in the device tree.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4dbdb7681e243431530df0725627192a0c4aefda
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jun 10 16:53:46 2008 -0500
- 85xx: expose cpu identification
- The current cpu identification code is used just to return the name
- of the processor at boot. There are some other locations that the name
- is useful (device tree setup). Expose the functionality to other bits
- of code.
- Also, drop the 'E' suffix and add it on by looking at the SVR version
- when we print this out. This is mainly to allow the most flexible use
- of the name. The device tree code tends to not care about the 'E' suffix.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jun 10 13:25:24 2008 -0500
- mpc83xx: MVBLM7: minor build fixups
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a1293e549b56da135ef32ffca5b9d35a16aa6802
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue Jun 10 09:14:05 2008 +0200
- add MPC8343 based board mvBlueLYNX-M7 (board+make files)
- Add MPC8343 based board mvBlueLYNX-M7.
- It's a single board stereo camera system.
- Please read doc/README.mvblm7 for details.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c005b93925ba49f07da2aa748527996d927e172f
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue Jun 10 09:13:16 2008 +0200
- add MPC8343 based board mvBlueLYNX-M7 (doc+config)
- Add MPC8343 based board mvBlueLYNX-M7.
- It's a single board stereo camera system.
- Please read doc/README.mvblm7 for details.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu May 29 18:14:56 2008 +0400
- 83xx/85xx: further localbus cleanups
- move the BRx_* and ORx_* left behind in mpc85xx.h
- The same is needed for mpc8xx.h and mpc8260.h (defines are almost
- the same, just few differences which needs some attention though).
- But the bad news for mpc8xx and mpc8260 is that there are a lot of users
- of these defines. So this cleanup I'll leave for the "better times".
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed May 28 18:20:15 2008 +0400
- 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
- This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
- use it on MPC85xx and MPC86xx processors.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
- Author: Tor Krill <tor@excito.com>
- Date: Mon Jun 2 15:09:30 2008 +0200
- Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
- Signed-off-by: Tor Krill <tor@excito.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Mon Jun 9 23:37:44 2008 +0900
- net: Conditional COBJS inclusion of network drivers
- Replace COBJS-y with appropriate driver config names.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jun 9 21:02:17 2008 -0400
- Use strncmp() for the fdt command
- Cleaner than doing multiple conditionals on characters.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Jun 7 12:25:05 2008 -0400
- The fdt boardsetup command criteria was not unique
- It was checking just for "b", which is not unique with respect to the
- "boot" command. Change to check for "boa"[rdsetup].
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 2f08bfa9526bae4f461e043530cfb903fec0d273
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Tue May 20 17:19:11 2008 +1000
- libfdt: Several cleanups to parameter checking
- This patch makes a couple of small cleanups to parameter checking of
- libfdt functions.
- - In several functions which take a node offset, we use an
- idiom involving fdt_next_tag() first to check that we have indeed been
- given a node offset. This patch adds a helper function
- _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
- - In fdt_rw.c in several places we have the expanded version
- of the RW_CHECK_HEADER() macro for no particular reason. This patch
- replaces those instances with an invocation of the macro; that's what
- it's for.
- - In fdt_sw.c we rename the check_header_sw() function to
- sw_check_header() to match the analgous function in fdt_rw.c, and we
- provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
- functions in fdt_rw.c
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jun 3 20:34:45 2008 -0400
- Remove the deprecated CONFIG_OF_FLAT_TREE
- Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
- cleaner, has better functionality, and is better supported.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 62bcdda293efa752f8281fbd9da03822b27ce82f
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jun 3 20:26:29 2008 -0400
- Change the stxxst to CONFIG_OF_LIBFDT
- This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
- to CONFIG_OF_LIBFDT.
- WARNING: It appears that this board lost its ability to boot via a
- flattened device tree prior to this changeset.
- WARNING: This conversion was untested because I do not have a board to
- test it on.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 589c04271d129729a8b01391453851ab9cc4069c
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jun 3 20:24:58 2008 -0400
- Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
- This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
- to CONFIG_OF_LIBFDT.
- WARNING: This conversion is untested because I do not have a board to
- test it on.
- NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
- /aliases/ethernet1 property for the ethernet to work.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit ee1e35bede91debc8bff9b02f75574486033b652
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu May 29 01:21:24 2008 -0500
- 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3b9519fc50802436e417c839e69df7b2016cade5
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed May 14 13:10:04 2008 -0500
- MPC85xx: Change traps.c to not reference non-addressable memory
- Currently, END_OF_RAM is used by the trap code to determine if
- we should attempt to access the stack pointer or not. However,
- on systems with a lot of RAM, only a subset of the RAM is
- guaranteed to be mapped in and accessible. Change END_OF_RAM
- to use get_effective_memsize() instead of using the raw ram
- size out of the bd.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Mon Jun 9 13:39:57 2008 +0900
- sh: Renesas Solutions SH7763RDP board support
- SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
- In this patch, support SCIF, NOR Flash, and Ethernet.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 60179098a95eaa972007d7ec58e4c1588029720f
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Jun 6 16:24:13 2008 +0900
- sh: Add support Renesas SH7763
- Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
- This patch supprts CPU register's header file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Jun 6 16:16:08 2008 +0900
- sh: SH7763 SCIF support
- SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
- but only SCIF2 is different. This patch work all SCIF channel.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 79b51ff8205f0354d5300570614c1d2db499679c
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Jun 7 20:51:59 2008 +0900
- [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
- Also get rid of some #ifdefs in *.c files.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Jun 7 20:51:56 2008 +0900
- [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
- CONFIG_SOC_AU1X00
- Common Alchemy Au1x00 stuff. All Alchemy processor based machines
- need to have this config as a system type specifier.
- CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
- CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
- Machine type specifiers. Each port should have one of aboves.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
- Author: Stuart Wood <stuart.wood@labxtechnologies.com>
- Date: Fri May 30 16:05:28 2008 -0400
- env_nand.c: Added bad block management for environment variables
- Modified to check for bad blocks and to skipping over them when
- CFG_ENV_RANGE has been defined.
- CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
- flash block size.
- Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 279726bd00558e80263d44581c44167625b7fb9a
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed May 14 13:09:58 2008 -0500
- MPC86xx: Change traps.c to not reference non-addressable memory
- Currently, END_OF_RAM is used by the trap code to determine if
- we should attempt to access the stack pointer or not. However,
- on systems with a lot of RAM, only a subset of the RAM is
- guaranteed to be mapped in and accessible. Change END_OF_RAM
- to use get_effective_memsize() instead of using the raw ram
- size out of the bd to prevent us from trying to access
- non-mapped memory.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 338cc038461a6c7709c5b86fd9a240209338a1ae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jun 6 14:28:14 2008 +0200
- tools/mkimage: fix compiler warnings on some systems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 6 16:10:41 2008 +0200
- ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
- We use upper case letters for the AMCC processor defines (like
- CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
- not CONFIG_440SPe. This patch fixes the last misspelled config options.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 72675dc6c06a48846d180106161d49dd714383cc
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 6 15:55:21 2008 +0200
- ppc4xx: Unify AMCC's board config files (part 3/3)
- This patch series unifies the AMCC eval board ports by introducing
- a common include header for all AMCC eval boards:
- include/configs/amcc-common.h
- This header now includes all common configuration options/defines which
- are removed from the board specific headers.
- The reason for this is ease of maintenance and unified look and feel
- of all AMCC boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 490f204096d6e2c9940f67816f154a8125bab116
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 6 15:55:03 2008 +0200
- ppc4xx: Unify AMCC's board config files (part 2/3)
- This patch series unifies the AMCC eval board ports by introducing
- a common include header for all AMCC eval boards:
- include/configs/amcc-common.h
- This header now includes all common configuration options/defines which
- are removed from the board specific headers.
- The reason for this is ease of maintenance and unified look and feel
- of all AMCC boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 6 15:54:31 2008 +0200
- ppc4xx: Unify AMCC's board config files (part 1/3)
- This patch series unifies the AMCC eval board ports by introducing
- a common include header for all AMCC eval boards:
- include/configs/amcc-common.h
- This header now includes all common configuration options/defines which
- are removed from the board specific headers.
- The reason for this is ease of maintenance and unified look and feel
- of all AMCC boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Thu Jun 5 13:03:36 2008 +0200
- DM9000 fix status check fail 0x6d error for trizeps board
- According to the Application Notes of the DM9000, only the 2 bits 0:1 of
- the status byte need to be checked to identify a valid packet in the fifo
- But, The several different Application Notes do not all speak the same
- language on these bits. They do not disagree, but only 1 Application Note
- noted explicitly that only these 2 bits need to be checked.
- Even the datasheets do not mention anything about these 2 bits.
- Because the old code, and the kernel check the whole byte, I left this piece
- untouched.
- However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
- it should work.
- Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
- in the fifo) is much shorter now, compared to the older U-boot driver code,
- so that we can maybe run into a hardware condition now that was never seen
- before, or maybe was seen very unfrequently.
- Additionaly added a cleanup of a stack variable.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] Update <asm/addrspace.h> header
- - Fix traditional KSEG names
- - Replace PHYSADDR with CPHYSADDR
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit f0d5a6f060d00358b85c62a921a423ea8df71184
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] mips_config.mk: Misc fixes
- - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
- - Modify comments
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 5f64d21c9a2998794f255b469165b91f092dfc2d
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] Kill unused <version.h> inclusions
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit a55d48174cfd1a5bc184159513f48dcbbe409c83
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
- MIPS port has two problems in timer routines. One is now we assume CFG_HZ
- equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
- in the U-Boot system.
- The other is we don't have a proper time management counter like timestamp
- other ARCHs have. We need the 32-bit millisecond clock counter.
- This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
- 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
- of calculated CP0 counter cycles in a CFG_HZ.
- STRATEGY:
- * Fix improper CFG_HZ value to have 1000
- * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
- * timer_init: initialize timestamp and set up the first timer expiration.
- Note that we don't need to initialize CP0 count/compare registers here
- as they have been already zeroed out on the system reset. Leave them as
- they are.
- * get_timer: calculate how many timestamps have been passed, then return
- base-relative timestamp. Make sure we can easily count missed timestamps
- regardless of CP0 count/compare value.
- * get_ticks: return the current timestamp, that is get_timer(0).
- Most parts are from good old Linux v2.6.16 kernel.
- v2:
- - Remove FIXME comments as they turned out to be trivial.
- - Use CP0 compare register as a global variable for expirelo.
- - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
- instead.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] lib_mips/time.c: Fix udelay
- What we have to do is just to wait for given micro-seconds. No need to
- take into account current time, get_timer and CFG_HZ.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:28:59 2008 +0900
- [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
- We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
- This patch replaces mips_{compare,count}_set and mips_count_get with
- existing macros.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:48:17 2008 +0200
- Get rid of annoying/superfluous bad-checksum warning message
- U-boot can complain a lot about 'checksum bad' when it is attached to the network.
- It is annoying for ordinary users who start to doubt the network connection
- in general when they see messages like this.
- This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
- than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
- now before checking the checksum.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Jun 4 10:47:25 2008 +0200
- Fix order for reading rx-status registers in 32bit mode of DM9000
- A last minute cleanup before submitting the DM9000A patch series yesterday introduced
- a bug in reading the rx-status registers in 32bit mode only.
- This patch repairs this.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 98291e2e689096420465074cce926b226d2e71b4
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:26 2008 +0200
- DM9000: Some minor code cleanups
- Some lines of the U-boot DM9000x driver are longer than 80 characters, or
- need some other minor cleanup.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 850ba7555dbd4ca8d14fc475b864d534797adab3
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:25 2008 +0200
- DM9000: Make driver work properly for DM9000A
- The DM9000A network controller does not work with the U-boot DM9000x driver.
- Analysis showed that many incoming packets are lost.
- The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
- check for a valid rx packet be done on the interrupt status register, not
- directly by performing the dummy read and the rx status check as is currently
- the case in the u-boot driver.
- When the recommended poll is done as suggested the driver starts working
- correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
- can be more than 1 package in the fifo at the same time.
- The driver must perform the rx-status check in a loop and read and handle all
- packages until there is no more left _after_ the interrupt RX flag is set.
- This change has been tested with DM9000A, DM9000E, DM9000EP.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:24 2008 +0200
- DM9000: Improve eth_reset() routine
- According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
- reset procedure must be done twice to properly reset the DM9000 by means of software.
- This errata is not needed anymore for the DM9000A, but it does not bother it.
- This change has been tested with DM9000A, DM9000E, DM9000EP.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit acba31847fad9ae40708cc2c9f3a634ec35f3416
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:23 2008 +0200
- DM9000: improve eth_send() routine
- The eth_send routine of the U-boot DM9000x driver does not match the
- DM9000 or DM9000A application notes/programming guides.
- This change improves the stability of the DM9000A network controller.
- This change has been tested with DM9000A, DM9000E, DM9000EP.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 134e266253c02a7832560da59d394989c4f64453
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:22 2008 +0200
- DM9000: repair debug logging
- It seems that the debugging code of the DM9000x driver in U-boot has not been
- compiled for a long time, because it cannot compile...
- Also rearranged some loglines to get more useful info while debugging.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit a101361bfe23c120321e45d114c0603b8e0763e9
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:21 2008 +0200
- DM9000: Add data bus-width auto detection.
- The U-boot DM9000x driver contains a compile time bus-width definition for
- the databus connected to the network controller.
- This compile check makes the code unclear, inflexible and is unneccessary.
- It can be asked to the network controller what its bus-width is by reading bits
- 6 and 7 of the interrupt status register.
- The linux kernel already uses a runtime mechanism to determine this bus-width,
- so the implementation below looks somewhat like that implementation.
- This change has been tested with DM9000A, DM9000E, DM9000EP.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 63a0afa0c32e5f4ea98a9439542870072437404d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jun 4 19:19:20 2008 +0200
- ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
- This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
- introduced by the commit:
- ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
- With this patch SDRAM will get initialized again and booting from NAND
- is working again.
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
- commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue May 27 14:19:30 2008 +0200
- Socrates: Fix PCI bus frequency report
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
- Author: Tor Krill <tor@excito.com>
- Date: Thu May 29 11:10:30 2008 +0200
- Fix incorrect switch for IF_TYPE in part.c
- Use correct field in block_dev_desc_t when writing interface type in
- dev_print. Error introduced in 574b3195.
- Also added fix from Martin Krause
- Signed-off-by: Tor Krill <tor@excito.com>
- commit b64b8a0bd310935b70af69ac970952f2b364ae56
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue May 27 10:25:39 2008 +0200
- Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- commit 35ef877f0a8f6232cdef748f442fed5accb2b641
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Thu May 22 18:56:52 2008 -0500
- Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
- Removed unneeded command line history initialization. Also, the original
- code would access the 'initted' variable before relocation to SDRAM
- which resulted in erratic behavior since the bss is not initialized when
- executing from flash.
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit 22f371b63038a4ecab04068877c1089e51a01ba1
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed May 21 13:28:30 2008 -0700
- PPC4xx: Simplified post_word_{load, store}
- This patch simplifies post_word_{load,store} by using the preprocessor
- to eliminate redundant, copy-and-pasted code.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
- Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
- Date: Wed May 7 21:25:33 2008 +0400
- cfi_flash: enable M18 flash chips family support.
- Added new command set ID. Buffered write command processing is changed
- in order to support M18 flash chips family.
- Signed-off-by: Alexey Korolev <akorolev@infradead.org>
- Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
- commit 93c56f212ccdadc182018f0769cb284426b88f1d
- Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
- Date: Wed May 7 21:24:44 2008 +0400
- cfi_flash: support of long cmd in U-boot.
- Some NOR flash chips needs support of commands with length grether than max
- value size of uchar. For example all M18 family chips use 0x1ff command in
- buffered write mode as value of program loops count.
- Signed-off-by: Alexey Korolev <akorolev@infradead.org>
- Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
- commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri May 16 11:06:06 2008 +0200
- DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
- On AD7414 the first value upon bootup is not read correctly.
- This is most likely because of the 800ms update time of the
- temp register in normal update mode. To get current values
- each time we issue the "dtt" command including upon powerup
- we switch into one-short mode.
- This patch fixes the problem on AD7414 equipped boards (Sequoia,
- Canyonlands etc), that temp value printed in the bootup log was
- incorrect.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri May 30 16:55:06 2008 +0200
- ppc4xx: Cleanup CPCI405 variant's config file
- This patch removes some dead code from CPCI405 board's
- config files. JFFS2 support is also removed. It's not used and
- CPCI4052 does not build anymore without some size reduction.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
- Author: Kenneth Johansson <kenneth@southpole.se>
- Date: Thu May 29 16:32:33 2008 +0200
- Remove shell variable UNDEF_SYM.
- UNDEF_SYM is a shell variable in the main Makefile used to force the
- linker to add all u-boot commands to the final image. It has no use here.
- Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
- commit 8c66497e06bf803489c589df58ee591d71033274
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:10:35 2008 +0200
- Add support for environment in SPI flash
- This is pretty incomplete...it doesn't handle reading the environment
- before relocation, it doesn't support redundant environment, and it
- doesn't support embedded environment. But apart from that, it does
- seem to work.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:10:34 2008 +0200
- SPI Flash: Add "sf" command
- This adds a new command, "sf" which can be used to manipulate SPI
- flash. Currently, initialization, reading, writing and erasing is
- supported.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit d25ce7d24cc0f93881559f4009175ea305af65e8
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:10:33 2008 +0200
- SPI Flash subsystem
- This adds a new SPI flash subsystem.
- Currently, only AT45 DataFlash in non-power-of-two mode is supported,
- but some preliminary support for other flash types is in place as
- well.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 60445cb5c3eb77ed1a07f2d908eef09174483698
- Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Date: Fri May 16 11:10:32 2008 +0200
- atmel_spi: Driver for the Atmel SPI controller
- This adds a driver for the SPI controller found on most AT91 and AVR32
- chips, implementing the new SPI API.
- Changed in v4:
- - Update to new API
- - Handle zero-length transfers appropriately. The user may send a
- zero-length SPI transfer with SPI_XFER_END set in order to
- deactivate the chip select after a series of transfers with chip
- select active. This is useful e.g. when polling the status
- register of DataFlash.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri May 16 11:10:31 2008 +0200
- SPI API improvements
- This patch gets rid of the spi_chipsel table and adds a handful of new
- functions that makes the SPI layer cleaner and more flexible.
- Instead of the spi_chipsel table, each board that wants to use SPI
- gets to implement three hooks:
- * spi_cs_activate(): Activates the chipselect for a given slave
- * spi_cs_deactivate(): Deactivates the chipselect for a given slave
- * spi_cs_is_valid(): Determines if the given bus/chipselect
- combination can be activated.
- Not all drivers may need those extra functions however. If that's the
- case, the board code may just leave them out (assuming they know what
- the driver needs) or rely on the linker to strip them out (assuming
- --gc-sections is being used.)
- To set up communication parameters for a given slave, the driver needs
- to call spi_setup_slave(). This returns a pointer to an opaque
- spi_slave struct which must be passed as a parameter to subsequent SPI
- calls. This struct can be freed by calling spi_free_slave(), but most
- driver probably don't want to do this.
- Before starting one or more SPI transfers, the driver must call
- spi_claim_bus() to gain exclusive access to the SPI bus and initialize
- the hardware. When all transfers are done, the driver must call
- spi_release_bus() to make the bus available to others, and possibly
- shut down the SPI controller hardware.
- spi_xfer() behaves mostly the same as before, but it now takes a
- spi_slave parameter instead of a spi_chipsel function pointer. It also
- got a new parameter, flags, which is used to specify chip select
- behaviour. This may be extended with other flags in the future.
- This patch has been build-tested on all powerpc and arm boards
- involved. I have not tested NIOS since I don't have a toolchain for it
- installed, so I expect some breakage there even though I've tried
- fixing up everything I could find by visual inspection.
- I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
- DataFlash drivers posted as a follow-up. I'd like some help testing
- other boards that use the existing SPI API.
- But most of all, I'd like some comments on the new API. Is this stuff
- usable for everyone? If not, why?
- Changed in v4:
- - Build fixes for various boards, drivers and commands
- - Provide common struct spi_slave definition that can be extended by
- drivers
- - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
- - Make default bus and mode build-time configurable
- - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
- Changed in v3:
- - Add opaque struct spi_slave for controller-specific data associated
- with a slave.
- - Add spi_claim_bus() and spi_release_bus()
- - Add spi_free_slave()
- - spi_setup() is now called spi_setup_slave() and returns a
- struct spi_slave
- - soft_spi now supports four SPI modes (CPOL|CPHA)
- - Add bus parameter to spi_setup_slave()
- - Convert the new i.MX32 SPI driver
- - Convert the new MC13783 RTC driver
- Changed in v2:
- - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
- new API.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Tested-by: Guennadi Liakhovetski <lg@denx.de>
- commit 289011207d999b2e4085150d2aa30d547ad9b800
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:10:30 2008 +0200
- Move definition of container_of() to common.h
- AVR32 and AT91SAM9 both have their own identical definitions of
- container_of() taken from the Linux kernel. Move it to common.h so
- that all architectures can use it.
- container_of() is already used by some drivers, and will be used
- extensively by the new and improved SPI API.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:08:11 2008 +0200
- soft_i2c: Pull SDA high before reading
- Spotted by Dean Capindale.
- Systems that support open-drain GPIO properly are allowed provide an
- empty I2C_TRISTATE define. However, this means that we need to be
- careful not to drive SDA low when the slave is expected to respond.
- This patch adds a missing I2C_SDA(1) to read_byte() required to
- tristate the SDA line on systems that support open-drain GPIO.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
- Author: Stefan Roese <sr@denx.de>
- Date: Mon May 19 11:34:53 2008 +0200
- ppc4xx: Remove implementations of testdram()
- This patch removes the used testdram() implementations of the board
- that are maintained by myself.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 17:37:28 2008 +0200
- ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
- Historically the 405 U-Boot port had a dram_init() call in early init
- stage. This function was still called from start.S and most of the time
- coded in assembler. This is not needed anymore (since a long time) and
- boards should implement the common initdram() function in C instead.
- This patch now removed the dram_init() call from start.S and removes the
- empty implementations that are scattered through most of the 405 board
- ports. Some older board ports really implement this dram_init() though.
- These are:
- csb272
- csb472
- ERIC
- EXBITGEN
- W7OLMC
- W7OLMG
- I changed those boards to call this assembler dram_init() function now
- from their board specific initdram() instead. This *should* work, but please
- test again on those platforms. And it is perhaps a good idea that those
- boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
- some time. So further patches welcome here.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 17:22:11 2008 +0200
- ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 39b32be18cd33b53a84065edcd4e465165cc5564
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 17:20:03 2008 +0200
- ppc4xx: Fix common ECC generation code for 440GP style platforms
- This patch makes the common 4xx ECC code really usable on 440GP style
- platforms.
- Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
- compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
- we need to make some processor dependant defines used later on by the
- driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ec724f883ee3f3925e6c55027e8ffa70ada83303
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 17:13:55 2008 +0200
- ppc4xx: Change Kilauea to use the common DDR2 init function
- This patch changes the kilauea and kilauea_nand (for NAND booting)
- board port to not use a board specific DDR2 init routine anymore. Now
- the common code from cpu/ppc4xx is used.
- Thanks to Grant Erickson for all his basic work on this 405EX early
- bootup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 14:59:21 2008 +0200
- ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
- This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
- ppc4xx related SDRAM/DDR/DDR2 controller defines.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 14:57:41 2008 +0200
- ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
- This patch removes all SDRAM related defines from the PPC4xx headers
- ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
- the same SDRAM controller as 440 systems do (like 405EX and 440SP).
- It also introduces new defines for the equipped SDRAM controller based on
- which PPC variant is used. There new defines are:
- used on 405GR/CR/EP and some Xilinx Virtex boards.
- used on 440GP/GX/EP/GR.
- used on 440EPx/GRx.
- used on 405EX/r/440SP/SPe/460EX/GT.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 14:35:44 2008 +0200
- ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
- This patch consolidates the 405 and 440 parts of the NAND booting code
- selected via CONFIG_NAND_SPL. Now common code is used to initialize the
- SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
- Only *after* running from this location, nand_boot() is called.
- Please note that the initsdram() call is now moved from nand_boot.c
- to start.S. I experienced problems with some boards like Kilauea
- (405EX), which don't have internal SRAM (OCM) and relocation needs to
- be done to SDRAM before the NAND controller can get accessed. When
- initdram() is called later on in nand_boot(), this can lead to problems
- with variables in the bss sections like nand_ecc_pos[].
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Scott Wood <scottwood@freescale.com>
- commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Thu May 22 14:44:24 2008 -0700
- ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
- This patch (Part 2 of 2):
- * Rolls up a suite of changes to enable correct primordial stack and
- global data handling when the data cache is used for such a purpose
- for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
- * Related to the first, unifies DDR2 SDRAM and ECC initialization by
- eliminating redundant ECC initialization implementations and moving
- redundant SDRAM initialization out of board code into shared 4xx
- code.
- * Enables MCSR visibility on the 405EX(r).
- * Enables the use of the data cache for initial RAM on
- both AMCC's Kilauea and Makalu and removes a redundant
- CFG_POST_MEMORY flag from each board's CONFIG_POST value.
- - Removed, per Stefan Roese's request, defunct memory.c file for
- Makalu and rolled sdram_init from it into makalu.c.
- With respect to the 4xx DDR initialization and ECC unification, there
- is certainly more work that can and should be done (file renaming,
- etc.). However, that can be handled at a later date on a second or
- third pass. As it stands, this patch moves things forward in an
- incremental yet positive way for those platforms that utilize this
- code and the features associated with it.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c821b5f120bedf73867513466412587c6912a8f8
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Thu May 22 14:44:14 2008 -0700
- ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
- This patch (Part 1 of 2):
- * Rolls up a suite of changes to enable correct primordial stack and
- global data handling when the data cache is used for such a purpose
- for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
- * Related to the first, unifies DDR2 SDRAM and ECC initialization by
- eliminating redundant ECC initialization implementations and moving
- redundant SDRAM initialization out of board code into shared 4xx
- code.
- * Enables MCSR visibility on the 405EX(r).
- * Enables the use of the data cache for initial RAM on
- both AMCC's Kilauea and Makalu and removes a redundant
- CFG_POST_MEMORY flag from each board's CONFIG_POST value.
- - Removed, per Stefan Roese's request, defunct memory.c file for
- Makalu and rolled sdram_init from it into makalu.c.
- With respect to the 4xx DDR initialization and ECC unification, there
- is certainly more work that can and should be done (file renaming,
- etc.). However, that can be handled at a later date on a second or
- third pass. As it stands, this patch moves things forward in an
- incremental yet positive way for those platforms that utilize this
- code and the features associated with it.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a439680019e06171d4a5694b7992accce87f590e
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed May 21 13:28:30 2008 -0700
- PPC4xx: Simplified post_word_{load, store}
- This patch simplifies post_word_{load,store} by using the preprocessor
- to eliminate redundant, copy-and-pasted code.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- commit f979690ee337450b2030aba128f95b7a8d9881c0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu May 15 15:13:08 2008 -0500
- Fix warnings from gcc-4.3.0 build on a ppc host
- * The cfi_flash.c memset fix actual allows the board to boot so there is
- a bit more going on here than just resolving warnings associated with
- uninitialized variables.
- * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
- inline function 'ext2_find_next_zero_bit' which is not static
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed May 14 13:09:51 2008 -0500
- MPC512x: Change traps.c to not reference non-addressable memory
- Currently, END_OF_RAM is used by the trap code to determine if
- we should attempt to access the stack pointer or not. However,
- on systems with a lot of RAM, only a subset of the RAM is
- guaranteed to be mapped in and accessible. Change END_OF_RAM
- to use get_effective_memsize() instead of using the raw ram
- size out of the bd.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 81673e9ae14b771cd13faf19947192599cae3959
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue May 13 19:01:54 2008 -0500
- Make sure common.h is the first include.
- If common.h isn't first we can get CONFIG_ options defined in the
- board config file ignored. This can cause an issue if any of those
- config options impact the size of types of data structures
- (eg CONFIG_PHYS_64BIT).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue May 13 15:53:29 2008 +0200
- Avoid initrd and logbuffer area overlaps
- Add logbuffer to reserved LMB areas to prevent initrd allocation
- from overlaping with it.
- Make sure to use correct logbuffer base address.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 6956d53d9934862507f83f0e3255dfd4662e7482
- Author: Sascha Laue <sascha.laue@liebherr.com>
- Date: Tue May 13 13:29:54 2008 +0200
- lwmon5: add memory-pattern-test to FPGA POST.
- commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Thu May 8 19:02:51 2008 -0500
- PPC: 86xx Add bat registers to reginfo command
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Fri May 9 15:41:35 2008 -0500
- PPC: Add print_bats() to lib_ppc/bat_rw.c
- This function prints the values of all the BAT register
- pairs - I needed this for debug earlier this week; adding it to
- lib_ppc so others can use it (and add it to reginfo commands
- if so desired).
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit c148f24c15743a02e855636e6bed013bd121f7f2
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Thu May 15 21:29:04 2008 -0500
- PPC: Change lib_ppc/bat_rw.c to use high bats
- Currently, this code only deals with BATs 0-3, which makes
- it useless on systems that support BATs 4-7. Add the
- support for these registers.
- Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
- commit 31d826722434931e1152a09d140187dcf72f8aac
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Thu May 8 19:02:12 2008 -0500
- PPC: Create and use CONFIG_HIGH_BATS
- Change all code that conditionally operates on high bat
- registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
- instead of the myriad ways this is done now. Define the option
- for every config for which high bats are supported (and
- enabled by early boot, on parts where they're not always
- enabled)
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit aa3b8bf9c30065bb2ea852799d32db5020598495
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Wed May 28 19:55:19 2008 +0200
- E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed May 28 13:06:25 2008 -0500
- ColdFire: Add 10 base ethernet support for mcf5445x
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
- Author: Jason McMullan <mcmullan@netapp.com>
- Date: Fri May 30 00:53:38 2008 +0900
- mips: Add an 'include/asm/errno.h', like all other architectures
- All other u-boot architectures have an include/asm/errno.h, so
- this change adds it to the mips include/asm-mips headers also.
- Stolen from Linux 2.6.25.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- commit e2ad8426624bac457acc6925b6ff408e9bf20466
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Fri May 30 00:53:38 2008 +0900
- [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Fri May 30 00:53:38 2008 +0900
- [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit bf462ae450a7f2eeeddc699ed345b391e3263540
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Fri May 30 00:53:37 2008 +0900
- [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
- No functional changes.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 89a1550ec6b74452274a7a23127936e2c7eec711
- Author: Jason McMullan <mcmullan@netapp.com>
- Date: Fri May 30 00:53:37 2008 +0900
- mips: If CONFIG_CMD_SPI is defined, call spi_init()
- The mips architecture currently does not call 'spi_init()' in the generic
- board initialization routine is CONFIG_CMD_SPI is defined.
- This patch rectifies that problem.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
- Author: Jason McMullan <mcmullan@netapp.com>
- Date: Fri May 30 00:53:37 2008 +0900
- [MIPS] lib_mips/board.c: Add nand_init
- This patch adds the standard 'nand_init()' call to the mips generic
- 'board_init_r()' call, bringing MIPS in line with the other architectures.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit d6ac2ed893c2168738aee01579d6283af8d37045
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu May 22 10:49:46 2008 -0500
- Remove prototypes of nand_init() in favor of including nand.h.
- Likewise with onenand_init().
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu May 22 10:49:00 2008 -0500
- Make onenand_uboot.h self-sufficient.
- Don't assume types are provided by previously included headers.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
- Author: Dirk Behme <dirk.behme@gmail.com>
- Date: Wed Jan 16 14:26:59 2008 +0100
- nand: Correct NAND erase percentage output
- For NAND erase sizes smaller than one NAND erase block, erase
- percentage output becomes grater than 100% e.g.
- -- cut --
- > nand info
- Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
- > nand erase 0x100000 0x2000
- NAND erase: device 0 offset 0x100000, size 0x2000
- Erasing at 0x100000 -- 200% complete.
- OK
- >
- -- cut --
- Correct this and give user a warning that more is erased than specified:
- -- cut --
- > nand erase 0x100000 0x2000
- NAND erase: device 0 offset 0x100000, size 0x2000
- Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
- Erasing 0x00004000 instead
- Erasing at 0x100000 -- 100% complete.
- OK
- >
- -- cut --
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit 5922db6c0948506be91e0de44e7a6863a18a417f
- Author: Stelian Pop <stelian@popies.net>
- Date: Tue May 13 17:31:24 2008 +0200
- Cleanup nand_info[] declaration.
- The nand_info array is declared as extern in several .c files.
- Those days, nand.h contains a reference to the array, so there is
- no need to declare it elsewhere.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon May 19 09:30:43 2008 -0500
- NAND: Provide a sane default for NAND_MAX_CHIPS.
- This allows the header to be included regardless of whether a board's
- config file provides NAND-related defininitions.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Mon May 26 12:19:10 2008 +0200
- avr32: Fix theoretical race in udelay()
- If the specified delay is very short, the cycle counter may go past the
- "end" time we are waiting for before we get around to reading it.
- Fix it by checking the different between the cycle count "now" and the
- cycle count at the beginning. This will work as long as the delay
- measured in number of cycles is below 2^31.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed May 21 13:01:09 2008 +0200
- avr32: Compile atmel_mci.o conditionally
- Remove #ifdef CONFIG_MMC from the source file and use conditional
- compilation in the Makefile instead.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu May 22 12:28:25 2008 +0200
- avr32: Fix wrong error flags in atmel_mci driver
- Make sure we check for CRC errors when sending commands that use CRC
- checking.
- Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed May 21 11:10:59 2008 +0200
- avr32: Fix two warnings in atmel_mci.c
- The warnings are harmless but annoying. Let's fix them.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Mon May 19 11:36:28 2008 +0200
- avr32: Rework SDRAM initialization code
- This cleans up the SDRAM initialization and related code a bit, and
- allows faster booting.
- * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
- * Remove memory test from sdram_init() and make caller responsible
- for verifying the SDRAM and determining its size.
- * Remove base_address member from struct sdram_config (was sdram_info)
- * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
- * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 95107b7c028806919630bf02c653aa8f4f867c94
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Mon May 19 11:27:37 2008 +0200
- avr32: Do stricter stack checking in the exception handler
- Don't do a stack dump if the stack pointer is outside the memory area
- reserved for stack.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 2 15:32:57 2008 +0200
- avr32: Use the same entry point for reset and exception handling
- Since the reset vector is always aligned to a very large boundary, we
- can save a couple of KB worth of alignment padding by placing the
- exception vectors at the same address.
- Deciding which one it is is easy: If we're handling an exception, the
- CPU is in Exception mode. If we're starting up after reset, the CPU is
- in Supervisor mode. So this adds a very minimal overhead to the reset
- path (only executed once) and the exception handling path (normally
- never executed at all.)
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 0c16eed2189a190bd5655b33c029f809a9b31128
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 2 15:24:22 2008 +0200
- avr32: Put memset in its own section
- All C code is compiled with -ffunction-sections -fdata-sections.
- Assembly functions should get their own sections as well so that
- everything looks consistent.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 2 15:21:40 2008 +0200
- avr32: Rename pm_init() as clk_init() and make SoC-specific
- pm_init() was always more about clock initialization than anything
- else. Dealing with PLLs, clock gating and such is also inherently
- SoC-specific, so move it into a SoC-specific directory.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Apr 30 16:15:57 2008 +0200
- avr32: Use new-style Makefile for the at32ap platform
- This makes it easier to avoid compiling certain files later.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Apr 30 14:36:47 2008 +0200
- avr32: Remove unused file cpu/at32ap/pm.c
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Apr 30 14:19:28 2008 +0200
- avr32: Clean up the HMATRIX code
- Rework the HMATRIX configuration interface so that it becomes easier
- to configure the HMATRIX for boards with special needs, and add new
- parts.
- The HMATRIX header file has been split into a general,
- chip-independent part with register definitions, etc. and a
- chip-specific part with SFR bitfield definitions and master/slave
- identifiers.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 0a2e48792dd372c90b80059f3235e67a567e16fc
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Nov 22 12:14:11 2007 +0100
- avr32: Add support for the ATSTK1006 board
- This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
- board. It's currently in production and will be available soon.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Tue Apr 29 12:53:05 2008 +0200
- avr32: Get rid of the .flashprog section
- The .flashprog section was only needed back when we were running
- directly from flash, and it's even more useless on NGW100 since it
- uses the CFI flash driver which never used this workaround in the
- first place.
- Remove it on STK1000 as well, and get rid of all the associated code and
- annotations.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit cdd42c0c7a5205fc380912d83229069a71ea3abf
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Apr 30 13:09:56 2008 +0200
- avr32: Use correct condition around macb clock accessors
- get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
- the chip has a MACB controller, not when it has a USART.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit f793a3581901ff39c2abb94012d9bbc8573ccf02
- Author: David Brownell <david-b@pacbell.net>
- Date: Wed Apr 16 22:57:58 2008 -0700
- avr32: Disable the AP7000 internal watchdog on startup
- This patch forces the watchdog off in all cases. That will at least
- get rid of the constant reboot cycle, though it won't let the watchdog
- actually run in the new kernels: its probe() comes up with a polite
- warning.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 55ac7a7490b55da56659f95d82a0c83b9756df27
- Author: David Brownell <david-b@pacbell.net>
- Date: Fri Feb 22 12:54:39 2008 -0800
- avr32: stk1002 and ngw100 convergence
- Make STK1002 and NGW100 boards act more alike:
- - STK boards can use as many arguments as NGW
- - STK boards don't need to manage FPGAs either
- - NGW commands should match STK ones
- Also spell U-Boot right in prompts for STK1002 and NGW100.
- Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
- [haavard.skinnemoen@atmel.com: update STK100[34] as well]
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue May 27 13:47:00 2008 +0200
- Socrates: Fix PCI bus frequency report
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue May 27 11:49:13 2008 +0200
- Socrates: Added USB support.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 5a904e5637cff1d708dc67098004f83ba9e84c54
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue May 27 11:35:02 2008 +0200
- USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
- In case of several PCI USB controllers on a board this variable
- specifys which controller to use.
- See doc/README.generic_usb_ohci for details.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue May 27 10:36:07 2008 +0200
- Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 83e9d7a2614d4006b92690afa3390c291734267e
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Mon May 26 18:16:04 2008 +0200
- Socrates: Config file cleanup.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 602cac1389b755b223272f2328a47e6f8c240848
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat May 24 12:47:46 2008 +0200
- MAKEALL: add at91 list
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
- Author: Ron Madrid <ron_madrid@sbcglobal.net>
- Date: Fri May 23 15:37:05 2008 -0700
- Add Marvell 88E1118 support for TSEC
- Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 557b377d8bfc8b833b6e749457bcdfa298331a24
- Author: Jens Gehrlein <sew_s@tqs.de>
- Date: Mon May 5 14:06:11 2008 +0200
- smc911x: add 16 bit support
- Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
- Author: Christian Eggers <ceggers@gmx.de>
- Date: Wed May 21 21:29:10 2008 +0200
- Fix endianess conversion in usb_ohci.c
- Sorry, I forgot this line:
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- I think this must be swapped (result may be equal).
- commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
- Author: Christian Eggers <ceggers@gmx.de>
- Date: Wed May 21 22:12:00 2008 +0200
- USB: replace old swap_ with proper endianess conversion macros
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
- Author: Christian Eggers <ceggers@gmx.de>
- Date: Wed May 21 21:29:10 2008 +0200
- Fix endianess conversion in usb_ohci.c
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 477434c63c2ea5baa5c6c4e43500786f436511ff
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu May 22 01:15:53 2008 +0200
- USB: add support for multiple PCI OHCI controllers
- Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
- In case of several PCI USB controllers on a board this variable
- specifys which controller to use.
- Also add USB support for sokrates board.
- See doc/README.generic_usb_ohci for details.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 21 16:56:08 2008 +0200
- Fix some whitespace issues
- introduced by 53677ef18 "Big white-space cleanup."
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4416603aeb06861b468b06a981e52c3ff805db7b
- Author: York Sun <yorksun@freescale.com>
- Date: Mon May 12 14:36:39 2008 -0500
- Make ads5121 out-of-tree compiling safe
- Reuse the existing DIU driver in board/freescale/common.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit 0e1bad47cd345c76c91a64caf41011e431b62599
- Author: York Sun <yorksun@freescale.com>
- Date: Mon May 5 10:20:01 2008 -0500
- Adding DIU support for Freescale 5121ADS
- Add DIU and cfb console support to FSL 5121ADS board.
- Use #define CONFIG_VIDEO in config file to enable fb console.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit a48ff68d235e671176f6b496c44246dbe5e0a93f
- Author: York Sun <yorksun@freescale.com>
- Date: Mon May 5 10:20:00 2008 -0500
- Replace DPRINTF with debug
- Remove DPRINTF macro and replace it with generic debug macro.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
- Author: York Sun <yorksun@freescale.com>
- Date: Mon May 5 10:19:59 2008 -0500
- Move pixel clock setting to board file
- The clock divider has different format in 5121 and 8610. This patch moves it to
- board specific code.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit 53677ef18e25c97ac613349087c5cb33ae5a2741
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue May 20 16:00:29 2008 +0200
- Big white-space cleanup.
- This commit gets rid of a huge amount of silly white-space issues.
- Especially, all sequences of SPACEs followed by TAB characters get
- removed (unless they appear in print statements).
- Also remove all embedded "vim:" and "vi:" statements which hide
- indentation problems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu May 8 17:46:23 2008 +0200
- socrates: fix second TSEC configuration (it is actually TSEC3)
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu May 8 14:17:08 2008 +0200
- Fixed reset for socrates
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit e18575d5f589a62e19c70d471d4b4e27cad3af56
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Wed May 7 15:10:49 2008 +0200
- socrates: changes to support FDT
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Wed Apr 30 11:42:50 2008 +0200
- Initial support for "Socrates" board
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:46:42 2008 +0200
- POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
- This way we become able to utilize the full post_log_word for POST
- activities (overwise, POST ECC, which has 0x8000 ID, could be
- erroneously treated as started in post_output_backlog() even if there
- was actually no POST ECC run (because of OCM POST failure, for
- example).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 7845d49094c81321021b50a4dbb8864d2f3777e4
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:46:02 2008 +0200
- POST: mark OCM test as POST_STOP
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- commit 28a385065882d6cb6ac5f443311ff87887ed7c13
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:45:26 2008 +0200
- POST: add POST_STOP flag
- Don't run futher tests in case of a test fails that is marked as
- POST_STOP.
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit a525145d8110d15b4389d23c3ea8a78f22509d3f
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:44:16 2008 +0200
- POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
- Switch the OCM testid with the codec one. The reason is that current
- implementation requires the POST_ROM testid to fit into lower 16
- bits, and the codec test will never run with POST_ROM hopefully.
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:43:28 2008 +0200
- lwmon5: enable OCM post test on lwmon5 board
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- commit 6e8ec682268493b8d098f99e17b1ce71b4448977
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:42:47 2008 +0200
- POST: OCM test added.
- Added OCM test to POST layer. This version runs before all other tests
- but doesn't yet interrupt post sequence on failure.
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 6891260bdd935a382c95d9fa333922b0dfded68a
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:40:39 2008 +0200
- POST: typo fix
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- commit 727f63334676e760877d43bfb8f0e9331ac8b101
- Author: Hebbar <gururajakr@sanyo.co.in>
- Date: Tue May 20 02:16:36 2008 -0700
- common/usb.c: fix incorrect escape sequence
- Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
- Author: York Sun <yorksun@freescale.com>
- Date: Thu May 15 15:26:27 2008 -0500
- Fix 8313ERDB board configuration
- Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
- Correct TSEC1 vs TSEC2 assignment.
- Define ETHADDR and ETH1ADDR always.
- Signed-off-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 2c289e320dcfb3760e99cf1d765cb067194a1202
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon May 19 09:47:25 2008 -0500
- mpc86xx: Removed unused and unconfigured memory test code.
- Besides, other common code exists.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 180a90abdae72587c0f679edf8991455e559440d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 19 12:47:11 2008 +0200
- Release v1.3.3
- Update CHANGELOG for release.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 16bedc661de0dae767b1377d8413373a3fbcfa79
- Author: Stefan Roese <sr@denx.de>
- Date: Mon May 19 07:14:38 2008 +0200
- ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
- When SATA is selected (via jumper J6) we need to disable the first PCIe
- node in the device tree, so that Linux doesn't initialize it. Otherwise
- the Linux SATA driver will fail to detect the devices.
- The same goes the other way around too. So if PCIe is selected we need
- to disable the SATA node in the device tree.
- This is because PCIe port 0 and SATA on 460EX share the same pins
- (multiplexed) and we have to configure in U-Boot which peripheral is
- enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3cc27b426aeefe2930f911692e9df3143fb2565f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:58 2008 +0200
- i386: Fix multiple definitions of __show_boot_progress
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 311f3446930c1e64c12026c1cfd00500b05be52d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:57 2008 +0200
- sc530_spunk: add missing SOBJS entry
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a559317143b4f95927b08cd388707e6f077e95fa
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:56 2008 +0200
- sc520_spunk: Fix flash
- flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
- flash.c:398: error: label at end of compound statement
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 91f221317af64191ee8caf303ea9305943158691
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:49 2008 +0200
- drivers/pcmcia: add missing i82365
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit dd223944132f97ffa52977ea95e5a52428f5cc2f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:47 2008 +0200
- i386/bootm: remove unused var
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:45 2008 +0200
- example/gitignore: update with all generated examples
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a38dc3ea8614f8b0c41e432b445a9959b9711295
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu May 15 00:42:45 2008 +0200
- TQM8272: fix out-of-tree building
- ...and add to MAKEALL script
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 14 23:34:53 2008 +0200
- environment: fix bug introduced by commit a8409f4f1ac8
- env_get_char is not a function, but a pointer to one.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
- Author: Gary Jennejohn <garyj@denx.de>
- Date: Wed May 14 13:39:22 2008 +0200
- ppc4xx: QUAD100HD: Allow the environment to be put into flash.
- After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
- use a redundant environment.
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 14 13:55:30 2008 +0200
- Fix config files for out-of-tree building
- Several board/<...>/config.mk files include dynamically built (by
- the Makefile) config files but used the wrong file name of
- $(TOPDIR)/board/$(BOARDDIR)/config.tmp
- instead if the correct
- $(OBJTREE)/board/$(BOARDDIR)/config.tmp
- The bug is nasty because the build result is correct for the (normal)
- in-tree builds, and because 'sinclude' is used no errors get raised
- even for out-of-tree build tests. But out-of-tree builds use an
- incomplete and thus usually incorrect configuration...
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
- Author: Stefan Roese <sr@denx.de>
- Date: Wed May 14 13:40:03 2008 +0200
- ppc4xx: Fix bogus Canyonlands config.mk
- This patch fixes the canyonlands config.mk file to enable correct
- out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fdd1247a66d788a3446244f6fde9955a93c26322
- Author: Stefan Roese <sr@denx.de>
- Date: Wed May 14 10:32:32 2008 +0200
- ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
- Canyonlands has a file ddr2_fixed.c which needs special treatment when
- building in separate directory. It has to be linked to build directory
- otherwise it is not seen.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a8409f4f1ac84c36273c1a1e341189662521bcfb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 14 12:22:49 2008 +0200
- environment: cleanup prototype declarations of env functions.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cf39b07948015c480b72a6e732cf7d839aa93a9e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 14 12:21:48 2008 +0200
- linkstation_HGLAN: Fix out of tree building.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 085551c05ca09e6c491ea11a1c6727a36776a545
- Author: Stefan Roese <sr@denx.de>
- Date: Wed May 14 10:32:32 2008 +0200
- ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
- Canyonlands has a file ddr2_fixed.c which needs special treatment when
- building in separate directory. It has to be linked to build directory
- otherwise it is not seen.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1510b82d50615f344e89d42533e8224cce067dc0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue May 13 23:15:52 2008 +0200
- Makefile: fix "error: version_autogenerated.h: No such file or directory"
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
- Author: Stelian Pop <stelian@popies.net>
- Date: Tue May 13 17:31:24 2008 +0200
- Cleanup nand_info[] declaration.
- The nand_info array is declared as extern in several .c files.
- Those days, nand.h contains a reference to the array, so there is
- no need to declare it elsewhere.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 70fab1908fc1734a403711eaabbef546bc4b77dc
- Author: Stefan Roese <sr@denx.de>
- Date: Tue May 13 20:22:01 2008 +0200
- ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 12 01:11:21 2008 +0200
- Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
- This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
- which broke many PowerPC boards.
- commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 12 00:56:28 2008 +0200
- Revert "Avoid initrd and logbuffer area overlaps"
- This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
- which breaks building on all PPC boards that don't use a log buffer.
- commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Sat May 10 14:02:04 2008 -0700
- Fix offset calculation for multi-type legacy images.
- Calculation of tail was incorrect when size % 4 == 0.
- New code removes the conditional and does the same thing but with arithmetic
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 12 00:40:58 2008 +0200
- Revert "Change env_get_char from a global function ptr to a function."
- This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
- which is known to break booting from dataflash and NAND.
- commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 11 23:13:57 2008 +0200
- API: remove duplicate syscall check
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 67e3beb52c320b0a31cf030716c99392cde2d532
- Author: Stelian Pop <stelian@popies.net>
- Date: Fri May 9 21:46:51 2008 +0200
- AT91: Cleanup unused config header file definitions.
- CONFIG_ENV_OVERWRITE is commented out in the config header files,
- so let's cleanup the files by removing the whole definition.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:34 2008 +0200
- Support AT91CAP9 revC CPUs
- The AT91CAP9 revC CPU has a few differences over the previous,
- revB CPU which was distributed in small quantities only (revA was
- an internal Atmel product only).
- The revC silicon needs a special initialisation sequence to
- switch from the internal (imprecise) RC oscillator to the
- external 32k clock.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 098b7b4b441b12c2a64dd517930f43c793542759
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:33 2008 +0200
- Use custom logo for Atmel boards
- This patch adds a custom vendor logo for the Atmel AT91 boards.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 761c70b80cdd3bead40146b96a8e713d6ae01632
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:32 2008 +0200
- AT91SAM9RLEK: hook up the ATMEL LCD driver
- This patch makes the necessary adaptations (PIO configurations and
- defines in config header file) to hook up the Atmel LCD driver to the
- AT91SAM9RLEK board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:31 2008 +0200
- AT91SAM9263EK: hook up the ATMEL LCD driver
- This patch makes the necessary adaptations (PIO configurations and
- defines in config header file) to hook up the Atmel LCD driver to the
- AT91SAM9263EK board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 820f2a958325061a446115f3035e48e4726b3390
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:30 2008 +0200
- AT91SAM9261EK: hook up the ATMEL LCD driver
- This patch makes the necessary adaptations (PIO configurations and
- defines in config header file) to hook up the Atmel LCD driver to the
- AT91SAM9261EK board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:29 2008 +0200
- AT91CAP9ADK: hook up the ATMEL LCD driver
- This patch makes the necessary adaptations (PIO configurations and
- defines in config header file) to hook up the Atmel LCD driver to the
- AT91CAP9ADK board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
- Author: Stelian Pop <stelian@popies.net>
- Date: Fri May 9 21:57:18 2008 +0200
- Add ATMEL LCD driver
- This patch adds support for the ATMEL LCDC driver which is used on some
- AT91 and AVR platforms.
- Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
- AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 18:52:25 2008 +0200
- AT91SAM9RLEK support
- This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
- board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8e429b3eee23927c1222679f6b6f53667b21595c
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 18:52:23 2008 +0200
- AT91SAM9263EK support
- This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
- board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:22 2008 +0200
- AT91SAM9261EK support
- This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
- board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 86c8c8a414988c50104a3b02c29f50af2be738c0
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:21 2008 +0200
- AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
- This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
- in order to cope with the changes in DataFlash partitionning scheme
- (cset c3a60cb3).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 96996ac25d5222611a8888968db6e53a6d3726da
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:20 2008 +0200
- AT91SAM9260EK: Normalize BOOTARGS
- This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
- DataFlash or from NAND), and gives to Linux a fully specified mtdparts
- variable.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:19 2008 +0200
- AT91SAM9260EK: Normalize SPI timings
- This patch changes the SPI timings to closely match the ones
- used by the Linux kernel and the Atmel's own bootstrap project.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:18 2008 +0200
- AT91SAM9260EK: Handle 8 or 16 bit NAND
- The Atmel boards can handle 8 or 16 bit NAND memories. This patch
- makes the support configurable in the board config header file
- (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ab52640fc01624e208424e527af0b7b3a5a65a12
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:17 2008 +0200
- AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
- This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
- in order to cope with the changes in DataFlash partitionning scheme
- (cset c3a60cb3).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:16 2008 +0200
- AT91CAP9ADK: Normalize BOOTARGS
- This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
- DataFlash or from NAND), and gives to Linux a fully specified mtdparts
- variable.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 93da48b910511911ce110656e17ed733c8ac4c45
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:15 2008 +0200
- AT91CAP9ADK: Normalize SPI timings
- This patch changes the SPI timings to closely match the ones
- used by the Linux kernel and the Atmel's own bootstrap project.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:14 2008 +0200
- AT91CAP9ADK: Handle 8 or 16 bit NAND
- The Atmel boards can handle 8 or 16 bit NAND memories. This patch
- makes the support configurable in the board config header file
- (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:13 2008 +0200
- Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
- All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
- below avoids the duplication of u-boot.lds by putting the file in the
- cpu directory instead of the board one.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:12 2008 +0200
- Add proper copyright notices in Atmel boards Makefiles
- The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
- copyright notice. This patch adds the missing pieces.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e817a042cef6164bf26fee86f90326f2ec9e6745
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:11 2008 +0200
- Add copyright information in Atmel boards partition.c
- When Ulf did the dataflash.c cleanup, he didn't add his copyright on
- the new created files. This patch fixes the problem.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:10 2008 +0200
- Update origin and copyright information in arch-at91sam9 header files
- When doing the AT91CAP9/AT91SAM9 port, a number of header files were
- copied from the Linux kernel sources. This patch explicitly specifies
- this origin for all the copied headers, and for those missing copyright
- information, adds it.
- Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
- in the latest kernel sources by 'at91sam9_smc.h'.
- The copyright information has been confirmed by the AT91 Linux kernel
- maintainer, Andrew Victor <avictor.za@gmail.com>.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 79dd1712689d6a5031d7cbff54957049680751c7
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Thu May 8 16:00:55 2008 +0200
- ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
- When using dhcp/bootp the "netmask" environment variable is not set
- because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
- desireable, so the following patch adds this this option to the board
- config.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 869d14b4cc2e47de2ddcb117bad0407a44436684
- Author: Stefan Roese <sr@denx.de>
- Date: Sat May 10 10:30:36 2008 +0200
- ppc4xx: Update Makalu defconfig to use device-tree booting as default
- This patch reworks the default environment on Makalu. Now "net_nfs" for
- example uses the device-tree style booting formerly know as "net_nfs_fdt".
- Also the addresses in RAM were changed because of the new image booting
- support, which check for image overwriting. So the addresses needed to
- get adjusted.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f3612a7b199cab3942f60d9c1392eb39d58cc699
- Author: Becky Bruce <bgill@freescale.com>
- Date: Wed May 7 13:28:16 2008 -0500
- PPC: fix map_physmem build warning
- map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
- enabled. This quiets the warning.
- Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
- commit 36f32675f40292002ee1fed252c180a43022d2d4
- Author: Becky Bruce <bgill@freescale.com>
- Date: Wed May 7 13:24:57 2008 -0500
- Update pci code to use phys_addr_t
- Physical addrs need to be represented by phys_addr_t, not
- unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
- are going to fail mightily.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu May 8 22:32:22 2008 -0700
- Support legacy multi-type images without FDT section.
- This patch enables legacy multi-type images containing only a Linux kernel
- and root file system to be loaded, maintaining compatibility with previous
- versions of u-boot.
- This is required when using old image files such as a Linux 2.4 kernel /
- filesystem.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 881031d9732783b7aeae2198fc7eb480ae8974a6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 10 00:38:02 2008 +0200
- Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 10 00:36:09 2008 +0200
- post/cpu/ppc4xx/Makefile: line length cleanup
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 22:52:09 2008 +0200
- Fix @ -> <at> substitution
- When applying the AT91CAP9 patches upstream, something transformed
- the '@' character into the ' <at> ' sequence.
- The patch below restores the original form in all the places where
- it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
- were copied from AT91CAP9, and a couple of other files where the
- ' <at> ' sequence was present).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 22:52:10 2008 +0200
- Update origin and copyright information in arch-at91sam9 header files
- When doing the AT91CAP9/AT91SAM9 port, a number of header files were
- copied from the Linux kernel sources. This patch explicitly specifies
- this origin for all the copied headers, and for those missing copyright
- information, adds it.
- Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
- in the latest kernel sources by 'at91sam9_smc.h'.
- The copyright information has been confirmed by the AT91 Linux kernel
- maintainer, Andrew Victor <avictor.za@gmail.com>.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 22:52:11 2008 +0200
- Add copyright information in Atmel boards partition.c
- When Ulf did the dataflash.c cleanup, he didn't add his copyright on
- the new created files. This patch fixes the problem.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu May 8 10:09:27 2008 +0200
- mx31ads: fix 32kHz clock handling
- According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
- oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
- Also fix a typo when verifying a jumper configuration. While at it, make
- two needlessly global functions static.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed May 7 13:10:04 2008 +0200
- Avoid initrd and logbuffer area overlaps
- Add logbuffer to reserved LMB areas to prevent initrd allocation
- from overlaping with it.
- Make sure to use correct logbuffer base address.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed May 7 13:08:54 2008 +0200
- ppc: Cleanup get_effective_memsize() use
- Removed duplicated effective memory size calculation code.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 273c37d843d5b581090378016cd12dd9c586907b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed May 7 09:03:53 2008 +0200
- Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
- Recent modifcations to LOGBUFFER handling code were incorrecly
- introduced to fit_check_kernel() routine during
- "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
- commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
- This patch cleans up this merge issue.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit bc11756daff89a3de09ca80adac962b88cf06e6e
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Tue May 6 20:16:15 2008 -0700
- Propagate Error Status to the Shell on fw_printenv Errors
- Changed implementation such that fw_printenv returns failure status
- when one or more specified variables do not exist or when incorrect
- command syntax is used.
- This aids scripting fw_printenv such that the script can key of the
- return status rather than relying on standard error "scraping".
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Tue May 6 16:18:00 2008 -0700
- Fix Compilation Errors with 'tools/env/fw_printenv'
- In the current top-of-tree, 1.3.3.-rc2, the optional tool
- 'tools/env/fw_printenv' fails to compile for two reasons:
- 1) The header watchdog.h cannot be found.
- 2) The header zlib.h is picked up from the tool chain rather than the
- project causing a prototype conflict for crc32.
- This patch addresses both of these issues.
- Platforms Tested On:
- - AMCC "Kilauea"
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- commit 597f6c26a18b389903a64692bacbf9a1ca69355b
- Author: James Yang <James.Yang@freescale.com>
- Date: Mon May 5 10:22:53 2008 -0500
- Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
- When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
- work before relocating to RAM because command history is written into
- a global array that is not writable before relocation. This patch
- defers to the no-editing and no-history code in readline_into_buffer()
- if it is called before relocation.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 726c0f1e5f108dccea052965123b95837d2bd402
- Author: Detlev Zundel <dzu@denx.de>
- Date: Mon May 5 16:11:22 2008 +0200
- cosmetic: Adjust coding style for switch statements to be consistent
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 574b319512b13e10800f0045e39b993f4ca25e42
- Author: Detlev Zundel <dzu@denx.de>
- Date: Mon May 5 16:11:21 2008 +0200
- Fix disk type output in disk/part.c
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
- Author: Vlad Lungu <vlad.lungu@windriver.com>
- Date: Mon May 5 14:20:03 2008 +0300
- Mail address change, documentation modified
- Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
- commit 4d49b28038e2819088e8356a77212fc95a89ce5a
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun May 4 15:42:41 2008 +0200
- microblaze: Repare intc handling
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 4 15:17:52 2008 +0200
- include/gitignore: update to all architectures
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1df368aed3b8bc240fe1595d290b0e91b22961da
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Mon May 5 02:12:06 2008 +0200
- ide: Remove spurious second include of io.h
- Removed the second include, with all the #ifdef around as suggested by Wolfgang.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
- Author: Adrian Filipi <adrian.filipi@eurotech.com>
- Date: Tue May 6 16:46:37 2008 -0400
- Fix some typos
- This patch fixes three typos.
- The first is a repetition of CONFIG_CMD_BSP.
- The second makes the #endif comment match its #if.
- The third is a spelling error.
- Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
- commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Sun May 4 16:45:01 2008 -0700
- Recognize 'powerpc' As an Alias for IH_ARCH_PPC
- Add support for the recognition of 'powerpc' as an alias for the PowerPC
- architecture type since Linux is already trending in that direction,
- preferring 'powerpc' to 'ppc'.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- commit f5a24259190c388c2527bdc49fee34577d862cc7
- Author: Wheatley Travis <Travis.Wheatley@freescale.com>
- Date: Fri May 2 13:35:15 2008 -0700
- 7450 and 86xx L2 cache invalidate bug corrections
- The 7610 and related parts have an L2IP bit in the L2CR that is
- monitored to signal when the L2 cache invalidate is complete whereas the
- 7450 and related parts utilize L2I for this purpose. However, the
- current code does not account for this difference. Additionally the 86xx
- L2 cache invalidate code used an "andi" instruction where an "andis"
- instruction should have been used.
- This patch addresses both of these bugs.
- Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
- Acked-By: Jon Loeliger <jdl@freescale.com>
- commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri May 9 10:16:13 2008 +0200
- Avoid infinite loop "Generating include/autoconf.mk"
- Fix a bogus circular dependency that caused an infinite loop of
- "Generating include/autoconf.mk" again and again.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 567fb852178dbf59529d7301620a3f3732a4b02d
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 22:52:09 2008 +0200
- Fix @ -> <at> substitution
- When applying the AT91CAP9 patches upstream, something transformed
- the '@' character into the ' <at> ' sequence.
- The patch below restores the original form in all the places where
- it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
- were copied from AT91CAP9, and a couple of other files where the
- ' <at> ' sequence was present).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 73ccb3410a0785593cda7aee455dfc51f790e281
- Author: Gary Jennejohn <gary.jennejohn@freenet.de>
- Date: Mon Apr 28 14:04:32 2008 +0200
- ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ef2642625cbfb1c3695e3478d08ae515052a4950
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 8 11:10:46 2008 +0200
- ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a00eccfebc954ad9485161efeca7d9aaf626d530
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 8 11:05:15 2008 +0200
- ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
- This patch adds fdt (flattened device tree) support to all remaining AMCC
- eval boards. Most newer boards already support device tree. With this patch,
- all AMCC boards now enable device tree passing from U-Boot to Linux
- arch/powerpc kernels.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 8 11:01:09 2008 +0200
- ppc4xx: Add weak default ft_board_setup() routine
- This patch adds a default ft_board_setup() routine to the 4xx fdt code.
- This routine is defined as weak and can be overwritten by a board specific
- one if needed.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 8 10:48:58 2008 +0200
- ppc4xx: acadia: Add fdt support and fix section overlap problem
- This patch adds fdt (flattened device tree) support to the AMCC
- Acadia eval board. This increases the image size and it doesn't
- fit anymore into 256kByte. Since we didn't want to remove features
- from the configuration, we decided to increase the U-Boot image size
- (add one flash sector).
- Also changed the default environment definition to make it
- independent of such changes.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4adb3023de75bc150f088c8935db340930ad38c8
- Author: Ira Snyder <iws@ovro.caltech.edu>
- Date: Tue Apr 29 11:18:54 2008 -0700
- ppc4xx: Add device tree support to AMCC Yosemite
- Add support for booting with a device tree blob. This is needed to boot
- ARCH=powerpc kernels. Also add support for setting the eth0 mac address
- via the ethaddr variable.
- Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
- Author: Dave Mitchell <dmitchell@amcc.com>
- Date: Wed May 7 09:00:23 2008 -0700
- ppc4xx: Fix typos in 460GT/EX FBDV array
- Corrected two typos in the 460GT/EX FBDV array.
- Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed May 7 16:54:31 2008 -0500
- 85xx: Limit CPU2 workaround to parts that have the errata
- Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit a5fe514e8ace564300d2c1d73846ddff49654243
- Author: Lee Nipper <lee.nipper@freescale.com>
- Date: Fri Apr 25 15:44:45 2008 -0500
- mpc83xx: system performance settings for MPC8349EMDS.
- These same settings are used on MPC8349ITX, and
- improve performance on MPC8349EMDS.
- Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 49387dba910e485640b575e920ee463b7e611dc3
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue May 6 13:22:52 2008 +0900
- [MIPS] cpu/mips/cache.S: Fix build warning
- Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
- warns illegal global symbol references by bal (and jal also) instruction.
- This does not happen with the latest binutils v2.18.
- Here's an example on gth2_config:
- mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
- stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
- c -EB -c -o cache.o cache.S
- cache.S: Assembler messages:
- cache.S:243: Warning: Pretending global symbol used as branch target is local.
- cache.S:250: Warning: Pretending global symbol used as branch target is local.
- In principle, gas might be sensitive to global symbol references in PIC
- code because they should be processed through GOT (global offset table).
- But if `bal' instruction is used, it results in PC-based offset jump.
- This is the cause of this warning.
- In practice, we know it doesn't matter whether PC-based reference or GOT-
- based. As for this case, both will work before/after relocation. But let's
- fix the code.
- This patch explicitly sets up a target address, then jump there.
- Here's an example of disassembled code with/without this patch.
- 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
- 9000066c: ac80fffc sw zero,-4(a0)
- 90000670: 01402821 move a1,t2
- -90000674: 0411ffba bal 90000560 <mips_init_icache>
- -90000678: 01803021 move a2,t4
- -9000067c: 01602821 move a1,t3
- -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
- -90000684: 01a03021 move a2,t5
- -90000688: 03000008 jr t8
- -9000068c: 00000000 nop
- +90000674: 01803021 move a2,t4
- +90000678: 8f8f83ec lw t7,-31764(gp)
- +9000067c: 01e0f809 jalr t7
- +90000680: 00000000 nop
- +90000684: 01602821 move a1,t3
- +90000688: 01a03021 move a2,t5
- +9000068c: 8f8f81e0 lw t7,-32288(gp)
- +90000690: 01e0f809 jalr t7
- +90000694: 00000000 nop
- +90000698: 03000008 jr t8
- +9000069c: 00000000 nop
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
- Author: Vlad Lungu <vlad.lungu@windriver.com>
- Date: Mon May 5 14:04:00 2008 +0300
- Allow building mips versions with ELDK 3.1.1
- .gpword works only with local symbols on certain binutils versions
- Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
- commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 5 12:52:36 2008 +0200
- MAKEALL: add inka4x0 board
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun May 4 21:34:23 2008 +0200
- kb9202 board: fix build problem.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun May 4 12:10:33 2008 +0200
- Prepare for v1.3.3-rc3
- Update ChNAGELOG, minor white space cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun May 4 00:35:15 2008 +0200
- drivers/net/tsec.c: Fix typo.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Fri May 2 21:45:12 2008 -0400
- version_autogenerated.h: use printf rather than echo -n
- Some systems are dumb and do not implement the -n flag to echo (like OS X).
- Convert the Makefile to use printf as this should work everywhere.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4acc2a108ad0a669165924704a6cb083f9138242
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Fri May 2 18:17:50 2008 -0400
- fix building when saveenv is disabled in some setups
- If you enable environment in the flash, but disable the embedded
- option, and you disable the saveenv command, then the #if nested
- logic will trigger a compile failure:
- env_flash.c: In function 'env_relocate_spec':
- env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
- The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
- Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
- Date: Fri May 2 16:10:04 2008 -0400
- SBC8548: fix address mask to allow 64M flash
- Fix incorrect mask to enable all 64MB of onboard flash.
- Previously U-Boot incorrectly mapped only 8MB of flash, this
- patch correctly maps all the available flash.
- Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
- commit 3648085c464c8c22ef76fab006ca4344d3796124
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri May 2 19:48:56 2008 +0200
- qemu_mips: add README
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6fdd002689190a0022c7b3dbab37fcba724580ce
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Fri May 2 02:35:59 2008 +0200
- Fix misspelled comment
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Thu May 1 04:13:05 2008 -0400
- mkimage: make mmap() checks consistent
- The mmap() related code is full of inconsistent casts/constants when
- it comes to error checking, and may break when building on some
- systems (like ones that do not implicitly define the caddr_t type).
- Let's just avoid the whole mess by writing the code nice and clean in
- the first place.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Thu May 1 09:05:34 2008 +0200
- Fix defined but not used build warning
- - warning: 'srom' defined but not used
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Thu May 1 09:05:26 2008 +0200
- Fix implicit declaration build warnings
- - warning: implicit declaration of function ‘serial_initialize’
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 9acde129cc3f9c1b3bc11a821480dd446774d618
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue Apr 29 19:18:32 2008 +0200
- TSEC: add config options for VSC8601 RGMII PHY
- The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
- and Tx clock lines. They are configured using 2 bits in extended
- register 0x17.
- Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
- been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Acked-by: Andy Fleming <afleming@freescale.com>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- --
- drivers/net/tsec.c | 6 ++++++
- drivers/net/tsec.h | 3 +++
- 2 files changed, 9 insertions(+), 0 deletions(-)
- commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 3 23:07:15 2008 +0200
- Revert "ColdFire: Get information from the correct GCC"
- This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
- (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
- commit c4e5f52a58d278eebb87f476e353972c5dacea40
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 3 22:25:00 2008 +0200
- config.mk: use correct (cross) compiler
- Some config.mk files reference $(CC) to test for specific tool chain
- features, so make sure $(CC) gets set before including any such
- config files.
- This patch replaces commit b7166e05a5 ("ColdFire: Get information from
- the correct GCC").
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 27c38689d0cfde0e444239345f97b5eecc9f4067
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu May 1 02:13:44 2008 +0200
- pxa: fix previous definition on cpu init
- start.S:183:1: warning: "ICMR" redefined
- In file included from start.S:33:
- include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
- start.S:187:1: warning: "RCSR" redefined
- ...
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6d12e697de794d700767f22f950e3026ccf4daf6
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu May 1 02:13:43 2008 +0200
- pxa: fix pcmcia operation on 'i' may be undefined
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Apr 30 16:24:35 2008 -0500
- MPC8610HPCD: Drop -O2 from the build flags
- Make the flags use -Os like all other boards
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 30 15:50:39 2008 +0200
- RTC: Fix month offset by one problem in M41T62 RTC driver
- This patch fixes a problem with the month being read and written
- incorrectly (offset by one). This only gets visible by also using
- the Linux driver (rtc-m41t80).
- Tested on AMCC Canyonlands.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 141ba1cad8e6598a2466e7e2976c6a12285df619
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat May 3 13:51:44 2008 +0900
- [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
- Current trick to pick up GNU assembler minor version uses a dot(.) as a
- delimiter, and take the second field to obtain minor version number. But
- as can be expected, this doesn't work with a version string which has
- dots more than needs.
- Here's an example:
- $ mips-linux-gnu-as --version | grep 'GNU assembler'
- GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
- $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
- 2-129) 2
- $
- This patch restricts the version format to 2.XX.XX... This will work
- in most cases.
- $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
- 2.18.50.20080215
- $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
- 18
- $
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit ea638951acead7f1086c908c0b9f086beab82a22
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat May 3 13:51:28 2008 +0900
- [MIPS] cpu/mips/cache.S: Add dcache_enable
- Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
- "allow ports to override bootelf behavior") requires ports to have this
- function.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu May 1 21:30:16 2008 +0200
- onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
- Onenand needs a version of memcpy() which performs 16 bit accesses
- only; make sure the name does not conflict with the standard
- function.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 12bc4e94251c369c529ffa505cf58b148c372f7f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 30 22:38:17 2008 +0200
- cmd_nand: fix warning: str2long ncompatible pointer type
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Apr 4 11:16:11 2008 -0500
- Fix calculation of I2C clock for some 86xx chips
- Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
- There is no pattern that can be used to determine which chips use which
- frequency, so the only way to determine is to look up the actual SOC
- designation and use the right value for that SOC.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Apr 30 12:11:19 2008 -0500
- ColdFire: Fix ethernet hang issue for mcf547x_8x
- The ethernet hang is caused by receiving buffer in DRAM is not
- yet ready due to access cycles require longer time in DRAM.
- Relocate DMA buffer descriptors from DRAM to internal SRAM.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Apr 30 12:10:47 2008 -0500
- ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
- Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Apr 30 12:10:23 2008 -0500
- ColdFire: Get information from the correct GCC
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
- Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
- Date: Wed Apr 30 18:02:59 2008 +0200
- Fix warning in env_nand.c if compiled for DaVinci Schmoogie
- Fix warnings
- nv_nand.c: In function 'saveenv':
- env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
- env_nand.c: In function 'env_relocate_spec':
- env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
- if compiled for davinci_schmoogie_config.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- Ack by: Sergey Kubushyn <ksi@koi8.net>
- commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Apr 30 13:34:40 2008 +0200
- Fix warnings while compiling net/net.c for MPC8610HPCD board
- MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
- causing overriding default -Os option. New gcc (ver. 4.2.2)
- produces warnings while compiling net/net.c file with -O2
- option. The patch is an attempt to fix this.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 58b575e575c25fdf8c88141e145db201f3092149
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Wed Apr 30 15:23:38 2008 +0200
- lwmon5: fix offset error in sysmon0 POST
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e7419b243a373de4ee042f7d4f45f66de787240d
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Wed Apr 30 15:16:35 2008 +0200
- lwmon5: fix manual merge error in POST
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 30 17:46:26 2008 +0200
- cmd_nand.c: fix another 'incompatible pointer type' warning.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit de109d909707e2dfe806be5efc3cdb103b47c8ad
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 30 17:25:07 2008 +0200
- Makefile: fix parallel builds
- This problem shows up with parallel builds only; it results in
- somewhat cryptic error messages like
- $ JOBS=-j6 MAKEALL netstar
- Configuring for netstar board...
- arm-linux-ld: cannot find -lgeneric
- make[1]: *** [eeprom.srec] Error 1
- A few boards (like netstar and voiceblue) need some libraries for
- building; however, the board Makefile does not contain any such
- dependencies which may cause problems with parallel builds. Adding
- such dependencies is difficult as we would also have to provide build
- rules, which already exist in the respective library Makefiles.
- To solve this, we make sure that all libraries get built before the
- board code.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 30 14:51:36 2008 +0200
- ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
- This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
- used for NAND booting to match the values needed for the new 512MB
- DIMM modules shipped with the productions boards:
- Crucial: CT6464AC667.8FB
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ea9202a659dc75996facf1475f1866a19a9d3129
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 30 10:49:43 2008 +0200
- ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
- This patch fixes a problem with DIMMs that have 8 banks. Now the
- MCIF0_MBxCF register will be setup correctly for this setup too.
- This was noticed with the 512MB DIMM on Canyonlands/Glacier.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 29 23:41:06 2008 +0200
- Prepare v1.3.3-rc2, again.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b7fcc4c13993782342cf5cd20d237a6281648a0b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 29 23:35:24 2008 +0200
- Prepare v1.3.3-rc2
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 29 23:32:20 2008 +0200
- common/env_nand.c: fix one more incompatible pointer type issue
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 29 21:33:08 2008 +0200
- post/board/lwmon5/sysmon.c: fix manual merge error.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 29 12:54:59 2008 -0500
- 85xx: Add -mno-spe to e500/85xx builds
- Newer gcc's might be configured to enable autovectorization by default.
- If we happen to build with one of those compilers we will get SPE
- instructions in random code.
- -mno-spe disables the compiler for automatically generating SPE
- instructions without our knowledge.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 29 10:18:34 2008 -0500
- Update .gitignore for zlib.h
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 45239cf4152109caa925145ccd433529902df887
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 29 10:27:08 2008 -0500
- 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
- All the 85xx and 86xx UM describe the register as timing_cfg_3
- not as ext_refrec.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ef7d30b14394e4c4a153118f5845760cadada02a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 29 10:28:34 2008 -0500
- 85xx/86xx: Rename DDR init address and init extended address register
- Rename init_addr and init_ext_addr to match the docs between
- 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit cf6cc014270549684873a5972d2595052c468cb6
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Apr 28 02:24:04 2008 -0500
- 85xx: Additional fixes and cleanup of MP code
- * adjust __spin_table alignment to match ePAPR v0.94 spec
- * loop over all cpus when determing who is up. This fixes an issue if
- the "boot cpu" isn't core0. The "boot cpu" will already be in the
- cpu_up_mask so there is no harm
- * Added some protection in the code to ensure proper behavior. These
- changes are explicitly needed but don't hurt:
- - Added eieio to ensure the "hot word" of the table is written after
- all other table updates have occurred.
- - Added isync to ensure we don't prefetch loading of table entries
- until we a released
- These issues we raised by Dave Liu.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b2d527a8b9fb50afccbaf79b5540952585cdc760
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Tue Apr 29 15:06:41 2008 +0200
- lwmon5: minor clean-up to include/configs/lwmon5.h
- LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
- the CFG_DSPIC_TEST_ADDR definition more readable.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit f4c4d21a885ccc222fd0acdf653b683249e85117
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 16:08:05 2008 +0200
- ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Tue Apr 29 13:32:45 2008 +0200
- ppc flush_cache: add watch-dog triggering into the loops.
- Some boards (e.g. lwmon5) need rather a frequent watch-dog
- kicking. Since the time it takes for the flush_cache() function
- to complete its job depends on the size of data being flushed, one
- may encounter watch-dog resets on such boards when, for example,
- download big files over ethernet.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit cab99d6f3281ab6784feccf98b9b425daa58418a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 14:44:54 2008 +0200
- ppc4xx: Fix compilation warning in denali_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 14:12:07 2008 +0200
- ppc4xx: Fix Katmai CFG_MONITOR_LEN
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 13:57:07 2008 +0200
- ppc4xx: Complete remove bogus dflush()
- Since the current dflush() implementation is know to have some problems
- (as seem on lwmon5 ECC init) this patch removes it completely and replaces
- it by using clean_dcache_range().
- Tested on Katmai with ECC DIMM.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 13:36:51 2008 +0200
- ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
- As it seems the "old" ECC initialization routine by using dflush() didn't
- write all lines in the dcache back to memory on lwmon5. This could lead
- to ECC error upon Linux booting. This patch changes the program_ecc()
- routine to now use clean_dcache_range() instead of dflush().
- clean_dcache_range() uses dcbst which is exactly what we want in this
- case.
- Since dflush() is known is cause problems, this routine will be
- removed completely and replaced by clean_dcache_range() with an
- additional patch.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Apr 28 18:19:34 2008 +0200
- POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
- Author: Markus Brunner <super.firetwister@googlemail.com>
- Date: Mon Apr 28 08:47:47 2008 +0200
- ppc4xx: Fixup ebc clock in FDT for 405GP/EP
- On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
- and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
- doesn't exist.
- Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
- commit 2ef7503a593c77a80c2a054011970227c4b62774
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Apr 24 07:57:17 2008 +0200
- NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
- Move non-inlied functions into specific drivers file
- Set get_prom as weak
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Apr 3 17:04:19 2008 +0200
- net: make ARP timeout configurable
- Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
- On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
- to the boards get lost, which typically are ARP replies. By configuring
- the timeout to a lower value we significantly improve the first network
- transfer time on this board. The timeout is specified in milliseconds,
- later internally it is converted to deciseconds, because it has to be
- converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
- different boards.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Apr 3 13:36:18 2008 +0200
- minor cs8900 driver clean up
- Remove a redundant register definition, clean up some coding style
- violations.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 22:01:04 2008 +0200
- jffs2_1pass.c: fix incompatible pointer type warning
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Tue Apr 1 10:10:18 2008 +0200
- lwmon5: update dsPIC POST spezification
- The specification for the lwmon5 board dsPIC POST got changed.
- Also add defines for the temperatures and voltages.
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Tue Apr 1 15:13:03 2008 +0200
- Fix watchdog POST for lwmon5
- If the hardware watchdog detects a voltage error, the watchdog sets
- GPIO62 to low. The watchdog POST has to detect this low level.
- Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit dd5748bcd669f46aeb6686c1b341323843738ccc
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Mon Apr 28 14:37:14 2008 +0200
- rtl8169: fix compiler warnings
- Fix multiple compiler warnings related to argument type mismatch.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Mon Apr 28 14:36:06 2008 +0200
- IDE: fix compiler warnings
- The IDE driver can use 32-bit addresses in LBA mode, in which case it
- spits multiple warnings during compilation. Fix them.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit db9084de28c46ac81c8f681722cb0d7411be4d7f
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Mon Apr 28 14:35:57 2008 +0200
- LinkStation: fix compiler warning, add a maintainer
- out_8 wants a pointer to an unsigned as the first argument. Add a
- maintainer for Linkstation boards.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit c71abba3cb67b063f789f17abf6c7447727c0cd5
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 14:55:12 2008 +0200
- cmd_nand.c: fix "differ in signedness" problem
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f2c288a35341ad02ac03b1563d786763c9c8f159
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 12:48:47 2008 +0200
- pcnet.c: fix a merge issue
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 12:08:18 2008 +0200
- NAND: fix some strict-aliasing compiler warnings
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Apr 28 11:37:14 2008 +0200
- ppc4xx: Fix compile warning of hcu4 board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 11:31:23 2008 +0200
- MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Mon Apr 28 00:25:32 2008 +0200
- mx31ads: fix loadaddr environment variable define
- Arithmetic expressions do not get evaluated under stringification. Remove
- default network configuration, add DHCP command support. Thanks to Felix
- Radensky for reporting.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 144eec777ac07bcb12bd38245a5a289f694a7f98
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 10:55:24 2008 +0200
- katmai: fix section overlap problem
- Since we didn't want to remove features from the configuration, we
- decided to increase the U-Boot image size (add one flash sector).
- Also changed the default environment definition to make it
- independent of such changes.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 941d696d25624e3cc65ebf924199541acf52d74e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 10:55:24 2008 +0200
- katmai: fix section overlap problem
- Since we didn't want to remove features from the configuration, we
- decided to increase the U-Boot image size (add one flash sector).
- Also changed the default environment definition to make it
- independent of such changes.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Sat Apr 26 11:44:44 2008 -0500
- post: Fix building with O=
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Apr 26 01:55:00 2008 +0200
- Prepare v1.3.3-rc1
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 19cf2ec90d8ce52da60c1693693c4048cb810967
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Apr 26 01:25:39 2008 +0200
- post/Makefile: make sure to use the correct flags
- ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
- messages to be printed.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Apr 26 00:34:42 2008 +0200
- Coding Style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f9204e15173834ff8d123e36279ce49c3c6c74fc
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Apr 20 10:38:12 2008 +0200
- i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
- This patch enables SPI and MC13783/RTC support for the Litekit board.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit f97abbfb47d9e407354e157cae3f6369e460cd37
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Apr 25 01:08:32 2008 -0500
- MPC8544DS: decode pcie3 end-point configuration correctly.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 292188e15523c165c4269403fdcd33c26d89176e
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Fri Apr 25 00:55:09 2008 -0500
- MPC8544DS: Removes the unknown flash message information
- This patch removes the unknown flash message information:
- '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
- This unknown flash message is caused by PromJet.
- Some of the board user is unhappy with this information.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Apr 24 14:07:38 2008 -0500
- mpc83xx: bump loadaddr over fdtaddr to 0x500000
- this seems as a good compromise between human memory, typing,
- and last but not least, to accommodate for current and future kernel bloat.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Acked-by: Dave Liu <daveliu@freescale.com>
- commit be5a7190265a34d968578ff266549c60f6f57654
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Apr 15 13:12:23 2008 +0800
- mpc83xx: clean up the readme for 83xx boards
- 1. correct the typo
- 2. correct the memory map for 837xerdb board
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Apr 15 13:11:11 2008 +0800
- mpc83xx: remove the unused CPM's stuff
- The MPC83xx family never have CPM block, so remove it from 83xx.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit c63ad6325a8ac0097a54b418a3288926b0484b18
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Apr 18 16:29:40 2008 +0200
- cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
- This patch adds a configurable flash auto protection list that can be used
- to make U-Boot protect flash regions in flash_init().
- The idea has been discussed on the u-boot mailing list starting
- on Nov 18th, 2007.
- Even this patch brings a new feature it is used as a bugfix for 4xx
- platforms where flash_init() does not completely protect the
- monitor's flash range in all situations.
- U-Boot protects the flash range from CFG_MONITOR_BASE to
- (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
- include the reset vector at 0xfffffffc.
- Example:
- #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
- This config option will auto protect the last 512k of flash that
- contains the bootloader on board like APC405 and PMC405.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Apr 25 13:59:03 2008 +0200
- ppc4xx: Remove double defines in lwmon5.h
- introduced with latest lwmon5/POST merge
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7590378fb9c686709492ceb142825cd058255956
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Apr 25 13:54:02 2008 +0200
- Use watchdog-aware functions when calculating hashes of images - take two
- Some files didn't get updated properly with the "Use watchdog-aware
- functions when calculating hashes of images" commit, this commit
- fixes this.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8e048c438e20ec89b49da5f085f8f756eba6e587
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Apr 25 12:01:39 2008 +0200
- ppc4xx: Add bootcount limit handling for APC405 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Apr 25 12:10:09 2008 +0200
- Use watchdog-aware functions when calculating hashes of images
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 25 12:44:08 2008 +0200
- USB: fix more GCC 4.2.x aliasing warnings
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 25 12:41:53 2008 +0200
- lib_generic/crc32.c: add missing #include <watchdog.h>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 25 11:52:21 2008 +0200
- lib_generic/crc32.c: fix compile problem
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 22 12:20:32 2008 +0200
- ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
- The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
- environment variable will now get passed to the Linux kernel by setting
- the device_type property of the PCIe device tree node. For normal root-
- complex configuration it will keep its defaults value of "pci" and for
- endpoint configuration it will get changed to "pci-endpoint".
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Apr 24 10:30:53 2008 +0200
- lwmon5: watchdog POST fix
- Use the GPT0_MASKx registers as the temporary storage for watch-dog
- timer POST test instead of GPT0_COMPx. The latter
- (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Apr 21 18:10:14 2008 -0500
- lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
- This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
- proven problematic getting right from the start at least on 83xx and
- 4xx.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a99715b8ebfc500f3f40e01b36b64d473938443d
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Apr 18 14:50:01 2008 +0200
- Realining some header definitions.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 4acbc6c7f993cae409c424615415a3e76820f13d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Apr 24 07:57:16 2008 +0200
- NE2000: coding style cleanup
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b4aff1ffaf7120032c653357c007faa14f74d29d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 23 00:11:47 2008 +0900
- qemu-mips.h: Add CFI support
- CONFIG_ENV_OVERWRITE is also added.
- This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Apr 22 22:47:27 2008 +0900
- doc/README.mips: Add MIPS notes
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 215b01bba8bc662d35f72b084700b192d367dfb4
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Apr 22 12:27:56 2008 +0200
- Add support for calculating hashes with watchdog triggering
- Implement watchodg-aware variants of hash calculation functions:
- - crc32_wd()
- - md5_wd()
- - sha1_csum_wd()
- The above functions calculate the hash of the input buffer in chunks,
- triggering the watchdog after processing each chunk. The chunk size
- is given as a function call parameter.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Wed Apr 23 11:02:12 2008 +0900
- qemu-mips: Cleanup whitespace, indentation, etc.
- No functional change.
- This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
- Then I re-created from scratch, and changed more lines than the original.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Wed Oct 10 23:02:09 2007 +0300
- Fixed pcnet io_base
- Bus and phys address are not always the same
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Apr 24 23:44:26 2008 +0200
- drivers/net/pcnet.c: Coding Style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Wed Oct 10 23:04:23 2007 +0300
- Added Am79C970A chip id to pcnet
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Apr 20 10:35:03 2008 +0200
- i.MX31: Fix architecture numbers for ADS and Litekit boards
- Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit e7ae84d6c7288790e88639f57cb60daf89c11369
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Apr 20 10:36:36 2008 +0200
- i.MX31: Use symbolic names for Litekit membases.
- Use symbolic names instead of hard coded addresses for Litekit membases.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Apr 19 17:59:20 2008 +0200
- Fix show_boot_progress prototype
- in commit fad634071 "make show_boot_progress () weak."
- show_boot_progress is supposed to be declared as weak but declared as
- inline instead.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit edbed247a14d70b94958010f736621212285de91
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Apr 18 12:39:23 2008 +0200
- Memory footprint optimizations
- As suggested by Wolfgang Denk:
- - image printing functions:
- - remove wrappers
- - remove indentation prefix from functions' signatures
- - merge getenv_verify and getenv_autostart into one parametrized function
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Apr 15 13:33:11 2008 +0200
- MX31ADS environment variable update, spi and rtc support
- Update MX31ADS default environment to better match the flash layout and
- the memory map, support SPI and RTC.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Apr 21 09:28:36 2008 -0500
- 85xx: Round up frequency calculations to get reasonable output
- eg. because of rounding error we can get 799Mhz instead of 800Mhz.
- Introduced DIV_ROUND_UP and roundup taken from linux kernel.
- Signed-off-by: Dejan Minic <minic@freescale.com>
- Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Apr 23 16:58:04 2008 -0500
- fsl_pci: Only modify registers if we have them
- pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 83fe32334337def160b302aa9d152d808bfcc68e
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Wed Apr 23 10:57:33 2008 +0200
- USB: remove a cpu bug workaround for an unsupported architecture.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit f957576cb53e6cfab412709cfc8db1afd39d21c3
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Wed Apr 23 10:53:23 2008 +0200
- USB: fix those pesky aliasing warnings issued by gcc-4.2
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 89cdab788f3716b335fefb60b836ebcf975aceab
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Mar 31 11:02:01 2008 -0400
- crc32: use uint32_t rather than unsigned long
- The envcrc.c does sizeof(unsigned long) when calculating the crc, but
- this is done with the build toolchain instead of the target tool
- chain, so if the build is a 64bit system but the target is 32bits,
- the size will obviously be wrong. This converts all unsigned long
- stuff related to crc32 to uint32_t types. Compile tested only: output
- of ./tools/envcrc when run on a 32bit build system matches that of a
- 64bit build system.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 80c40b765b3642ddb9f3392b7898715aab44a29c
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Wed Mar 26 09:53:29 2008 +0100
- ARM: Davinci: Fix DM644x timer overflow handling and cleanup
- Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
- Changes:
- - Remove *_masked() functions as noted by Wolfgang
- - Adapt register naming to recent TI spec (sprue26, March 2007)
- - Fix reset_timer() handling
- - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
- [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
- - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
- Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
- Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
- commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Wed Apr 9 16:09:41 2008 +0200
- Added watchdog triggering calls in the "mtest" test function.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Sun Apr 6 19:19:14 2008 +0200
- lwmon5 watchdog: limit trigger rate
- Limit the rate of h/w watch-dog triggering on the LWMON5 board by
- the CONFIG_WD_MAX_RATE value.
- Note that an earlier version of this patch which used microseconds
- instead of ticks dis not work. The problem was that we used
- usec2ticks() to convert microseconds into ticks. usec2ticks() uses
- get_tbclk(), which in turn calls get_sys_info(). It turns out that
- this function does a lot of prolonged operations (like divisions)
- which take too much time so we do not trigger the watchdog in time,
- and it resets the system.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 2d2b994a30bb100774dc747ae9865b7f95285a88
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Mar 31 10:51:37 2008 +0200
- POST: move CONFIG_POST to Makefiles
- Introduce the new logical option CONFIG_HAS_POST which is set when the
- platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
- to determine should the POST libs be compiled for the selected target
- platform, or not.
- To avoid breaking u-boot linking process, the empty post/libpost.a file is
- created for platforms which do not have POSTs.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Mar 31 10:49:34 2008 +0200
- POST: preparations for moving CONFIG_POST to Makefiles
- Remove CONFIG_POST ifdefs from the post/ source files.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 22 14:14:20 2008 +0200
- ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
- This patch fixes the Canyonlands and Glacier default environment to better
- fit to the arch/powerpc device-tree kernels. The variables dealing with
- arch/ppc booting are removed, since these boards are supported only in
- arch/powerpc. Glacier uses the same config file as Canyonlands.
- Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 22 14:06:42 2008 +0200
- ppc4xx: Small coding style cleanup for the latest esd patches
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 79941d63bc03aed8c48d7602f18217cc200ee931
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 18:01:07 2008 +0200
- ppc4xx: Update CPU strapping for PMC440 boards
- This patch removes the temporary 'test' strapping option
- of the sbe command. The '667' strapping option now uses
- a PLB/PCI divider of 3.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit f00cf3193a6635355b121e90debb2f54e777e7da
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:42:21 2008 +0200
- ppc4xx: Remove unused APC405 strataflash driver
- The APC405 board support has been migrated to use the common
- CFI flash driver.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 1c686676a86473bbd92151f0544e109413f6ed06
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:42:17 2008 +0200
- ppc4xx: Update APC405 configuration
- - enable esd's auto_update mechanism
- - support alternative flash layout on rev. 1.8 boards
- - update default environment
- - use common CFI flash driver
- - coding style cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 0b9872515a521bf7866dc24b85ddce708e60d702
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:42:11 2008 +0200
- ppc4xx: Update APC405 board support
- - enable esd's auto_update mechanism
- - fix LCD support on latest hardware revision (uses other LCD controller)
- - support alternative flash layout on rev. 1.8 boards
- - coding style cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 83975d02e225e231960784972e7820a8b303756b
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:42:06 2008 +0200
- ppc4xx: update esd's common auto_update code for 405 boards
- - Coding style cleanup (long lines)
- - improve handling of protected flash regions
- - remove dead code
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit b9233fe5d59cb25d975071616bd1035d6f4c2285
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:41:59 2008 +0200
- ppc4xx: Update esd's common LCD code for 405 boards
- - Coding style cleanup (long lines)
- - Add s1d13505 support
- - Make some functions return a result code instead of void
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit dea68189424c3f1242427a8146a3861bf093173c
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 11:36:55 2008 +0200
- ppc4xx: Update FPGA image for APC405 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 2a05b152924acfcec3b037693329e517e6d3578f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 11:36:08 2008 +0200
- ppc4xx: Update bootlogo for APC405 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Apr 18 16:41:31 2008 +0200
- ppc4xx: Add dcache_enable() for 440
- dcache_enable() was missing for 440 and the patch
- 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
- "] behavior uses this function.
- Note: Currently the cache handling functions like
- d/icache_disable/enable() are NOP's on 440. This may be changed in the
- future.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a49e0d177a0749614b316ec847fb623f09c82c07
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 11:19:04 2008 +0200
- video: Add missing free for logo memory
- This patch adds two missing free()s.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
- Author: Troy Kisky <troy.kisky@boundarydevices.com>
- Date: Mon Sep 24 16:41:43 2007 -0700
- PATCH - Fix oob data copied into supplied buffer
- This patch correctly sets the oobavail variable
- and fixes a bug where the oob data was not valid when
- there where multiple groups in oobfree.
- First segment fixes a typo
- Second segment fixes a bug where oob data may be copied incorrectly.
- Third segment adds an error message when exiting due to write protect.
- Forth segment fixes a bug where oobavail may be set incorrectly.
- Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
- commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Apr 18 17:24:32 2008 +0200
- ppc4xx: Fix sys_get_info() for 405GP(r)
- This patch assigns the correct EBC clock for 405GP(r) CPUs
- to PPC4xx_SYS_INFO structure. Without this patch U-Boot
- uses an uninitialized EBC clock in its startup message.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 20 15:39:38 2008 -0700
- Makefile: remove nand_spl/System.map when cleaning up.
- commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 20 15:35:52 2008 -0700
- MAKEALL: sort entries / lists.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0878af169b181868a105b5c33f3a6423e2c9fd60
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Apr 18 11:29:01 2008 -0500
- 85xx: Fix size of cpu-release-addr property
- The cpu-release-addr is defined as always being a 64-bit quanity regardless
- if we are running on a 32-bit or 64-bit machine.
- commit 88353a985109562a639b2f8a0c90d77011bfe374
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Apr 4 11:15:58 2008 -0500
- Fix calculation of I2C clock for some 85xx chips
- Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
- some use CCB/3. There is no pattern that can be used to determine which
- chips use which frequency, so the only way to determine is to look up the
- actual SOC designation and use the right value for that SOC.
- Update immap_85xx.h to include the GUTS PORDEVSR2 register.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 18 11:44:27 2008 -0700
- Fix build breakage casued by commit c0559be371b2
- Change env_get_char from a global function ptr to a function.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 18 10:53:41 2008 -0700
- Coding Style cleanup, update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Apr 8 14:00:57 2008 -0400
- Add support for u-boot in svn and localversion-* files
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d23ff6827decf121461fbc5622612fd7effe207e
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Apr 3 17:04:22 2008 +0200
- MX31ADS network and flash updates
- This patch allows U-Boot to use buffered writes to the Spansion NOR
- flash installed on this board, and eliminates long delays in network
- transfers after the board startup.
- Also modify flash layout to embed main and redundant environment
- blocks in the U-Boot image.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit b5dc9b304d289831f291843ff88a45cbdf1a6290
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Mon Apr 14 10:53:12 2008 +0200
- Support for the MX31ADS evaluation board from Freescale
- This patch adds support for the MX31ADS evaluation board from Freescale,
- initialization code is copied from RedBoot sources, also provided by
- Freescale.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 8 10:33:29 2008 +0200
- ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 8 10:33:28 2008 +0200
- ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 8 10:33:27 2008 +0200
- ppc4xx: Add Glacier NAND booting target
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 46f373838e384a4c23d13581b1dfa5acb66b5810
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 8 10:31:00 2008 +0200
- nand_spl: Update nand_spl to support 2k page size NAND devices
- This patch adds support for booting from 2k page sized NAND device
- (e.g. Micron 29F2G08AAC).
- Tested on AMCC Canyonlands.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Apr 17 18:18:00 2008 +0200
- Fix crash on sequoia in ppc_4xx_eth_init
- Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
- with cache enabled (TLB Parity exeption). This patch
- fixes the problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Apr 17 18:15:27 2008 +0200
- ppc4xx: Fix crash on sequoia with cache enabled
- Currently U-Boot crashes on sequoia board in CPU POST if
- cache is enabled (CONFIG_4xx_DCACHE defined). The cache
- won't be disabled by change_tlb before CPU POST because
- there is an insufficient adress range check since
- CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
- this problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 43c509254fab375c49936498da944658117ed07c
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Apr 17 23:35:13 2008 +0900
- Use jr as register jump instruction
- Current assembler codes are inconsistent in the way of register jump
- instruction usage; some use jr, some use j. Of course GNU as allows both
- usages, but as can be expected from `Jump Register' the mnemonic `jr' is
- more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
- at all.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 7ce63709828d37b08866e537339a169bd0db2bd3
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Apr 15 14:15:30 2008 +0200
- RTC driver for MC13783
- MC13783 is a multifunction IS with an SPI interface to the host. This
- driver handles the RTC controller in this chip.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 38254f45b0b412332726c90d3184ad47479fcffb
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Apr 15 14:14:25 2008 +0200
- New i.MX31 SPI driver
- This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
- only implemented and tested on i.MX31, can with a modified register layout
- and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
- controllers too.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Tue Apr 15 19:09:10 2008 +0200
- Fix name of i.MX31 boards in config file header
- Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit a49864593e083a5d0779fb9ca98e5a0f2053183d
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Apr 13 19:42:19 2008 -0400
- allow ports to override go behavior
- Split the arch-specific logic out of the common go code and into a dedicated
- weak function called do_go_exec() that lives in cpu directories. This will
- need review from i386/nios people to make sure I didn't break them.
- commit 017e9b7925f74878d0e9475388cca9bda5ef9482
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Apr 13 19:42:18 2008 -0400
- allow ports to override bootelf behavior
- Change the bootelf setup function into a dedicated weak function called
- do_bootelf_exec. This way ports can control the behavior however they
- like before/after calling the ELF entry point.
- commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
- Author: Ulf Samuelsson <ulf@atmel.com>
- Date: Sat Apr 12 20:56:03 2008 +0200
- Reorder ARM boards in Makefile
- Rearrange ARM boards in Makefile so that ARM926EJ-S boards
- are no longer under ARM92xT header.
- Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
- Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
- Author: Ulf Samuelsson <ulf@atmel.com>
- Date: Sat Apr 12 20:29:44 2008 +0200
- Clean up dataflash partitioning
- This patch removes the board dependent parts from
- "drivers/mtd/dataflash.c".
- Each board relying on this, will have the appropriate
- code in a new file, "partition.c" in the board directory.
- board Makefiles updated to use the file.
- The dataflash partitions are aligned on sector/page boundaries.
- The CONFIG_NEW_DF_PARTITION was used to create named partitions
- This is now the default operation, and the CONFIG variable is removed.
- Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
- commit 51ecde946fec511a16346e498204ca10ad71080d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Apr 12 14:08:45 2008 +0200
- gitignore: udpate stgit generated and .patch file
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 18 00:15:36 2008 -0700
- Get rid of redundant copy of renamed header file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Fri Apr 11 21:20:14 2008 +0300
- Fix dependency generation for older gcc versions
- With gcc 3.3.3 at least, compilation fails with
- Generating include/autoconf.mk
- gcc: compilation of header file requested
- make: *** [include/autoconf.mk] Error 1
- since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit cb1c4896905ab22fcd982e6a8a539f0031942e71
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Apr 11 11:07:49 2008 +0200
- Restore the ability to continue booting after legacy image overwrite
- Before new uImage code was merged, bootm code allowed for the kernel image to
- get overwritten during decompresion. new uImage introduced a check for image
- overwrites and refused to boot the image that got overwritten. This patch
- restores the old behavior. It also adds a warning when the image overwriten is
- a multi-image file, because in such case accessing componentes other than the
- first one will fail.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Apr 11 11:07:43 2008 +0200
- ppc: Fix ftd_blob variable init when processing raw blob
- Set fdt_blob variable before its value is printed out.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 3d36be030043cd841a2551d00a395135e363a64b
- Author: Jason Wessel <jason.wessel@windriver.com>
- Date: Thu Apr 10 14:30:16 2008 -0500
- Remove all the search paths from the .lds files.
- The cross compiler is responsible for providing the correct libraries
- and the logic to find the linking libraries.
- Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
- commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Mon Apr 14 15:44:16 2008 +0200
- Boot-related documentation update
- - document 'bootm_low' and 'bootm_size' environment variables
- - update inaccurate CFG_BOOTMAPSZ entry
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Wed Apr 9 17:34:08 2008 +0200
- Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
- Restore logic reverted by commit
- commit 80767a6cead9990d9e77e62be947843c2c72f469
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed Sep 5 16:04:41 2007 +0100
- Changed API name to coloured_led.h
- Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
- Tidied other cpu/arm920t/start.S code
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Apr 8 10:24:24 2008 -0400
- Remove conflicting NAND ID
- There are two NAND entries with ID 0xDC and this obviously causes problems.
- In the kernel, they punted the first entry, so we should do the same.
- See this upstream e-mail for more info:
- http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
- Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 188e94c370621708d13547d58dbc6ed3c5602aa8
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Tue Apr 8 16:20:35 2008 +0900
- cpu/mips/cpu.c: Fix flush_cache bug
- Cache operations have to take line address (addr), not start_addr.
- I noticed this bug when debugging ping failure.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Thu Apr 3 14:29:01 2008 +0200
- TQM5200: fix default IDE reset level
- Before the first call of ide_reset(), the level of the IDE reset
- signal on the TQM5200 is low (reset asserted). This patch sets the
- default value to high (reset not asserted).
- Currently this patch fixes no real problem, but it is cleaner to
- assert the reset signal only on demand, and not permanently.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit c61e033d6e8abb7b4060ee36060961e1399f6079
- Author: Detlev Zundel <dzu@denx.de>
- Date: Thu Apr 3 14:18:48 2008 +0200
- mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
- Author: Detlev Zundel <dzu@denx.de>
- Date: Thu Apr 3 14:18:47 2008 +0200
- mgcoge, mgsuv: rename 'addcon' to 'addcons'
- The latter name with 13 users is already established, so we will use
- that.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit e175eacc87c3a9e4dad0799fee0e95732520afc7
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Thu Apr 3 13:37:56 2008 +0200
- IDE: fix bug in reset sequence
- According to the ata (ata5) specification the RESET- signal
- shall be asserted for at least 25 us. Without this patch,
- the RESET- signal is asserted on some boards for only < 1 us
- (e. g. on the TQM5200). This patch adds a general delay of
- 25 us to the RESET- signal.
- Without this patch a Platinum 4 GiB CF card is not recognised
- properly on boards with a TQM5200 (STK52xx, TB5200).
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 813bea96a960916c72b4a3a7df840151529c26ce
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Thu Apr 3 14:43:11 2008 +0200
- lwmon5: disable CONFIG_ZERO_BOOTDELAY
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 2 08:03:58 2008 +0200
- ds174x: Fix warning on return in rtc_get and rtc_set functions
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a253b38bf50c85227c33ca0febc870ee49d1588e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 2 08:03:57 2008 +0200
- cmd_log.c: Fix assignment differ in signedness
- In function 'logbuff_init_ptrs':
- cmd_log.c:79: warning: pointer targets in assignment differ in signedness
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Wed Apr 2 11:04:43 2008 +0530
- Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
- Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
- commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Apr 1 14:07:10 2008 +0200
- s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c08fb3ea36d19b1640b7906264581e9105534399
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Tue Apr 15 10:24:14 2008 +0200
- Additional PCI IDs for IDE and network controllers
- These PCI IDs are required by the Linkstation platforms.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit c0559be371b2a64b1a817088c3308688e2182f93
- Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
- Date: Mon Apr 14 23:01:50 2008 +0200
- Change env_get_char from a global function ptr to a function.
- This avoids an early global data reference.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit 3e0f331c05d72f140715c1e9fca991927e44d422
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Apr 29 12:35:08 2008 +0000
- Clean up smsc911x driver
- Replace direct register address derefencing with accessor functions.
- Restrict explicitly 32-bit bus-width, extend affected configurations
- respectively.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Tue Apr 15 00:08:20 2008 -0400
- This patch adds a driver for the following smsc network controllers:
- LAN9115
- LAN9116
- LAN9117
- LAN9215
- LAN9216
- LAN9217
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3dfd4aab929cccddb63d9ea509967861e1333b52
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Tue Apr 1 15:13:03 2008 +0200
- Fix watchdog POST for lwmon5
- If the hardware watchdog detects a voltage error, the watchdog sets
- GPIO62 to low. The watchdog POST has to detect this low level.
- Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
- commit 24b448448a917e52806f82660a5c9d47608894fb
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Apr 1 15:22:11 2008 +0800
- ata: update the libata.h from ata.h of linux kernel
- Current libata.h of u-boot is out of sync from linux kernel,
- this patch make it be consistent with linux kernel.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Tor Krill <tor@excito.com>
- commit f8f9dc98883f66f59eb0601da65808e6b139c87c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Mar 31 11:59:27 2008 -0500
- Allow use of ARCH=powerpc when building
- The linux kernel is now mostly ARCH=powerpc, so to make life easier
- allow use to use ARCH=powerpc and convert it to ARCH=ppc.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Mar 31 10:40:54 2008 +0900
- Add apollon board MAINTAINERS entry
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 77e475cc0ed1832160017d364be32a0be9ff02a9
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Mar 31 10:40:36 2008 +0900
- Fix OneNAND read
- It should access with 16-bit instead of 8-bit
- Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit a9da2b41079d230db3a5641625311983f85ce1fb
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Mar 31 10:40:19 2008 +0900
- Fix OneNAND erase command
- It mis-calculates the block address.
- Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 61525f2ffa156665a66908fda47dbf29d65ea579
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Mon Mar 31 01:32:15 2008 +0200
- Support for LinkStation / KuroBox HD and HG PPC models
- This patch is based on the port by Mihai Georgian (see linkstation.c for
- Copyright information) and implements support for LinkStation / KuroBox HD
- and HG PPC models from Buffalo Technology, whereby HD is deactivated at
- the moment, pending network driver fixing.
- Notice to users: this is pretty much a barebone port. Support for network
- on HG models is already in the U-Boot mainline, but you might also want
- patches to switch fan / phy modes depending on the negotiated ethernet
- parameters. This patch also doesn't support console switching, booting EM
- mode, Buffalo specific ext2 magic number. So, if you want to use any of
- those, you need additional patches. Otherwise this patche provides a fully
- functional u-boot with a network console on your system.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Mar 30 01:22:13 2008 -0500
- Add CONFIG_MII_INIT support to related boards
- Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
- cmd_init.c. Add CONFIG_MII_INIT to board configuration files
- that use mii_init() in cmd_init.c.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Mar 30 01:19:06 2008 -0500
- Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
- Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
- CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit e99ccb488181d012248c6be30b2093e950319fc5
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Mar 27 11:46:38 2008 -0500
- Introduce phys_size_t and move phys_addr_t into asm/types.h
- Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
- that have larger physical addresses like 44x, 85xx, and 86xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 20a14a42a25f72e379f38460b8a8484667536795
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Apr 2 16:19:07 2008 -0500
- Rename include/md5.h to include/u-boot/md5.h
- Some systems have md5.h installed in /usr/include/. This isn't the
- desired file (we want the one in include/md5.h). This will avoid the
- conflict. This fixes the host tools building problem by creating a new
- directory for U-Boot specific header files.
- [Patch by Andy Fleming, modified to use separate directory by Wolfgang
- Denk]
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Acked-by: Timur Tabi <timur@freescale.com>
- commit f297b7a1ec87433f66320d89d993e1bc738c66b8
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Mar 27 18:51:17 2008 +0800
- drivers: code clean up
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Mar 27 18:50:41 2008 +0800
- drivers: clean up the ata_piix.h
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit e8f7ba404f1409606962815ecc955a06984b08b3
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Mar 27 18:49:56 2008 +0800
- doc: english polishing for README.sata
- according to gvb's suggestion, polishing for the doc.
- Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 3e3f766a5274d204780460e1879723b565296d34
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Mar 26 18:53:28 2008 -0500
- Fix warnings introduced by I2C bus speed setting patch
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3c735e7437150e8615f26930c7819db85634276d
- Author: eran liberty <eran.liberty@gmail.com>
- Date: Thu Mar 27 00:50:49 2008 +0100
- Altera Stratix II support
- Adds Support for Altera's Stratix II.
- Within your board specific init file you will have to call
- 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
- 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
- Altera_desc* contines (for example):
- {
- Altera_StratixII, /* part type */
- passive_serial, /* interface type */
- 1, /* bytes of data part can accept */
- (void *)(&funcs), /* interface function table */
- 0L, /* base interface address */
- 0 /* implementation specific cookie */
- }
- funcs is the interface. It is of type altera_board_specific_func.
- It looks like this:
- altera_board_specific_func func = {
- pre_fn,
- config_fn,
- status_fn,
- done_fn,
- clk_fn,
- data_fn,
- abort_fn,
- post_fn,
- };
- you will have to implement these functions, which is usually bit
- banging some gpio.
- Signed-off-by: Eran Liberty <liberty@extricom.com>
- commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 13 14:32:54 2008 -0700
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:41:17 2008 +0100
- Phytec Phycore-i.MX31 support
- This patch adds support for the Phytec Phycore-i.MX31 board
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:41:09 2008 +0100
- mx31 litekit support
- This patch adds support for the mx31 litekit board
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit cdace0661208754a53019ea0dc7b803a040e0939
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:40:49 2008 +0100
- add an i2c driver for mx31
- This patch adds an i2c driver for Freescale i.MX processors
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:40:42 2008 +0100
- core support for Freescale mx31
- This patch adds the core support for Freescale mx31
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 7ec68862a27c8f6f6d566228de8f6724d964a939
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 13 14:19:23 2008 -0700
- Fix compile error
- ...as suggested by Peter Pearse
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:40:36 2008 +0100
- Separate omap24xx specific code from arm1136
- Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
- to cpu/arm1136/omap24xx.
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Jan 29 18:21:05 2008 -0500
- disable caches before booting an app for Blackfin apps
- It isn't generally save to execute applications outside of U-Boot with caches
- enabled due to the way the Blackfin processor handles caches (requires
- software assistance). This patch disables caches before booting an ELF or
- just booting raw code. The previous discussion on the patch was that we
- wanted to use weaks instead, but that proved to not be feasible when multiple
- symbols are involved, which puts us back at the ifdef solution. I've
- minimized the ugliness by moving the setup step outside of the main function.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 13 10:03:54 2008 -0700
- ppc: Get rid of unused machine type definitions
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 13 09:59:26 2008 -0700
- Coding Style cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
- Author: Larry Johnson <lrj@acm.org>
- Date: Thu Feb 21 13:58:11 2008 -0500
- LM73 bug fix for negative temperatures and cleanup
- When the LM73 temperature sensor measures a temperature below 0 C, the
- current driver does not perform sign extension, so the result returned is
- 512 C too high. This patch fixes the problem, and does general cleanup
- of the code.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 96ef831f713289afba19da0c8f905e99da2b23e0
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Apr 3 13:36:02 2008 +0200
- cfi_flash: Support buffered writes on non-standard Spansion NOR flash
- Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
- series require different addresses for buffered write commands. Define a
- configuration option to support buffered writes on those chips. A more
- elegant solution would be to automatically detect those chips by parsing
- their CFI records, but that would require introduction of a fixup table
- into the cfi_flash driver.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
- Author: Lee Nipper <lee.nipper@freescale.com>
- Date: Thu Apr 10 09:35:06 2008 -0500
- mpc83xx: Update DIMM data bus width test to support 40-bit width
- 32-bit wide ECC memory modules report 40-bit width.
- Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
- Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5fb5a689d822ca61e814bd523fc930af335242fa
- Author: Dave Liu <r63238@freescale.com>
- Date: Mon Mar 31 17:05:12 2008 +0800
- mpc83xx: Fix the bug of serdes initialization
- Currently the serdes will not be initializated due to the
- partid's error.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2000784818f043db7ca60e2846a72d097766b894
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Apr 3 16:28:29 2008 +0800
- mpc83xx: Fix the SATA clock setting of 837x targets
- Currently the SATA controller clock is configured as CSB clock,
- usually the CSB clock is 400/333/266MHz.
- However, The SATA IP block is only guaranteed to operate up to
- 200 MHz as stated in the HW spec.
- The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
- This patch makes the SATA clock as half of CSB clock.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 2 13:41:21 2008 +0200
- mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Apr 9 04:20:57 2008 -0500
- 85xx: Fix detection of MP cpu spin up
- We were looking at the wrong memory offset to determine of a secondary
- cpu had been spun up or not. Also added a warning message if the
- all the secondary cpus we expect don't spin up.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f3e04bdc3f360c66801a9048956e61e41a16edba
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 8 10:45:50 2008 -0500
- 85xx: Use SVR_SOC_VER instead of SVR_VER
- The recent change introduced by 'Update SVR numbers to expand support'
- now requires that we use SVR_SOC_VER instead of SVR_VER if we want
- to compare against a particular processor id.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
- Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Date: Fri Apr 11 10:00:35 2008 -0400
- ppc4xx: Fix power mgt definitions for PPC440
- Corrected DCR addresses of PPC440EP power management registers.
- Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
- commit 950a392464e616b4590bc4501be46e2d7d162dea
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 11 15:11:26 2008 +0200
- Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
- Reverting became necessary after it turned out that the patches in
- the u-boot-arm repo were modified, and in some cases corrupted.
- This reverts the following commits:
- 066bebd6353e33af3adefc3404560871699e9961
- 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
- c88ae20580b2b01487b4cdcc8b2a113f551aee36
- a147e56f03871bba4f05058d5e04ce7deb010b04
- d6674e0e2a6a1f033945f78838566210d3f28c95
- 8c8463cce44d849e37744749b32d38e1dfb12e50
- c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
- 8bf69d81782619187933a605f1a95ee1d069478d
- 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
- a574a73852a527779234e73e17e7597fd8128882
- 1377b5583a48021d983e1fd565f7d40c89e84d63
- 1704dc20917b4f71e373e2c888497ee666d40380
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Apr 11 07:02:29 2008 +0200
- ppc4xx: Update Kilauea defconfig to use device-tree booting as default
- This patch reworks the default environment on Kilauea/Haleakala. Now
- "net_nfs" for exmaple uses the device-tree style booting formerly know
- as "net_nfs_fdt". Also the addresses in RAM were changed because of the
- new image booting support, which check for image overwriting. So the
- addresses needed togeet adjusted.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 9 11:58:02 2008 +0200
- ppc4xx: Fix Canyonlands default environment to work with new image support
- Since the new image support checks for image overwriting, the default
- environment needs to get adjusted to use correct addresses.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit dfc6c7b647dba7ab86749616f0e9e5740deed422
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 9 11:54:11 2008 +0200
- ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
- The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
- closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
- on 4xx systems _start currently cannot be used for this calculation.
- So revert back to the original version for now.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f91374f65eae8b42cac329e06ba1c54728278efb
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:49:52 2008 +0100
- microblaze: Sort microblaze boards in MAKEALL script
- commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:58:45 2008 +0100
- microblaze: clean microblaze_config.mk
- FLAGS are generated by U-BOOT generator.
- Board specific FLAGS are in board directory
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:47:19 2008 +0100
- microblaze: xupv2p fix config file for supporting FDT
- commit 188dc16b189143573b1ed90e584bf866d75cdd12
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:53:02 2008 +0100
- microblaze: ml401 fix config file for supporting FDT
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 4c6a6f02e239236261333759997eeaf86b30b54c
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:22:48 2008 +0100
- microblaze: ml401 - add ifdef for GPIO
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:13:03 2008 +0100
- microblaze: clean uart16550 and uartlite handling
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 0b20f250877441460fb79d72192954abe8498834
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:08:31 2008 +0100
- microblaze: Add Emaclite driver to Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 868cde5310f88234b774878e4f06e79df10a88b3
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:08:01 2008 +0100
- microblaze: Add Emac driver to Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:42:29 2008 +0100
- microblaze: add Emac ethernet driver
- commit 89c53891b18cbafd29ab8931b40e27ad231b6085
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:41:56 2008 +0100
- microblaze: add Emaclite ethernet driver
- commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:04:01 2008 +0100
- microblaze: ML401 and XUPV2P remove emac and emaclite reference
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 10:59:32 2008 +0100
- microblaze: remove old setting for emac driver
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 10:58:15 2008 +0100
- microblaze: Clean Makefile from ancient emac driver
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit ab68f921d9c741830f721c3d879c13a0c5597183
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 10:20:43 2008 +0100
- SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 6ed8a43a19bb0275501bc286007daafa923552cf
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 23:38:48 2008 +0100
- SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 23:34:47 2008 +0100
- SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 10:06:52 2008 +0100
- SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 23:26:48 2008 +0100
- SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 10:00:33 2008 +0100
- SPARC: Added support for SPARC LEON2 SOC Processor.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 23:00:38 2008 +0100
- SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 22:51:29 2008 +0100
- SPARC: Added support for SPARC LEON3 SOC processor.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit bf3d8b31169546fcddb4737391e1893fb12d033a
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 08:29:26 2008 +0100
- SPARC: added SPARC support for new uimage in common code.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 00ab32c85405a4fe65fd4128243086210fc90a21
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 22:36:03 2008 +0100
- SPARC: added SPARC board information to the command bdinfo.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit c2f02da21a3f37f0878554eebc785e04fdc4e128
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 09:47:00 2008 +0100
- SPARC: Added generic support for SPARC architecture.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit e54ec0f016803e4d9524ff71f7971bda0c51b287
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Apr 3 14:50:34 2008 +0200
- ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
- This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
- has 2 RGMII instances and we need to configure the 2nd RGMII instance
- for the EMAC2+3 channels.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c2a545ce33b26d80337f80b533828839249fb1c9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 2 08:03:56 2008 +0200
- MPC8xx: Fix libfdt support introduced in commit 77ff7b74
- fdt.c: In function 'ft_cpu_setup':
- fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
- fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
- fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
- fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Mar 31 20:45:56 2008 -0500
- Fix fdt set command to conform to dts spec
- The fdt set command was treating properties specified as <00> and <0011>
- as byte streams, rather than as an array of cells. As we already have
- syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
- we should use the <> syntax to describe arrays of cells, which are always
- 32-bits per element. If we imagine this likely (IMHO) scenario:
- > fdt set /ethernet-phy@1 reg <1>
- With the old code, this would create a bad fdt, since the reg cell would be
- made to be one byte in length. But the cell must be 4 bytes, so this would
- break mysteriously.
- Also, the dts spec calls for constants inside the angle brackets (<>)
- to conform to C constant standards as they pertain to base.
- Take this scenario:
- > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
- The old fdt command would complain that it couldn't parse that. Or, if you
- wanted to specify that a certain clock ran at 33 MHz, you'd be required to
- do this:
- > fdt set /mydev clock <1f78a40>
- Whereas the new code will accept decimal numbers.
- While I was in there, I extended the fdt command parser to handle property
- strings which are split across multiple arguments:
- > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
- > fdt p /ethernet@f00
- ethernet@f00 {
- interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
- };
- Lastly, the fdt print code was rearranged slightly to print arrays of cells
- if the length of the property is a multiple of 4 bytes, and to not print
- leading zeros.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 2 08:39:33 2008 +0200
- ppc4xx: Canyonlands: Init SATA/PCIe port correctly
- Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
- interface. This usage can be configured with the jumper J6. This patch
- correctly configures the SATA/PCIe PHY for SATA usage when this jumper
- is installed.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6fe2946f198481254a6ee9600d7456b8316a4083
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 17:37:49 2008 -0500
- remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
- finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
- "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
- started.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b5873f1732b92a25690e1513b90dfb0d644f6697
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Apr 1 07:30:51 2008 +0200
- dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2d934ea51f276522b532f870a820e844ff480b5b
- Author: Tor Krill <tor@excito.com>
- Date: Fri Mar 28 15:29:45 2008 +0100
- Add Vitesse 8601 support to TSEC driver
- Add phy_info for Vitesse VSC8601.
- Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
- Signed-off-by: Tor Krill <tor@excito.com>
- Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Mon Mar 31 14:25:00 2008 +0000
- SPARC: added SMC91111 driver in and out macros for LEON processors.
- This patch makes SPARC/LEON processors able to read and write
- to the SMC91111 chip using the chip external I/O bus of the memory
- controller. This patchs defines the standard in and out macros
- expected by the SMC9111 driver.
- To access that I/O bus one must set up the memory controller
- (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
- up this correctly when the other MCTRL parameters are set up. It
- can be set up from the board configuration header file.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 18:52:34 2008 +0100
- Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Mar 31 21:31:04 2008 +0200
- AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 18:52:33 2008 +0100
- Add support for AT91SAM9260EK
- Support for booting from internal DataFlash, external DataFlash card
- or NAND flash is available.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 1762f13b4aab88b685b1722f17dada247945624b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Mar 31 21:20:49 2008 +0200
- AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 761712188b353494defb2b644491ff73d0daaa6f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Mar 31 21:12:17 2008 +0200
- AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 20:52:32 2008 +0100
- Port AT91CAP9 to the new headers
- Adapt the existing AT91CAP9 code to the new headers and APIs.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 19:52:31 2008 +0100
- Finish header files reworking
- Replace AT91CAP9.h file with several splitted header files coming
- from the Linux kernel.
- This is part 2 of the replacement: more header imports and edits.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 19:52:30 2008 +0100
- Import several header files from Linux
- Replace AT91CAP9.h file with several splitted header files coming
- from the Linux kernel.
- This is part 1 of the replacement: pristine header files import.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit a8a78f2d99dc1bd30dc3595da118539b506c6118
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 20:52:28 2008 +0100
- Move at91cap9 specific files to at91sam9 directory
- AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
- common infrastructure can be used. Let this infrastructure be
- named after the AT91SAM9 family, and move the existing AT91CAP9
- files to the new place.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 61106a565870ff503f92b251b94bd7afef889a04
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 21:52:27 2008 +0100
- Use timer_init() instead of board supplied interrupt_init()
- The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
- the board, so use timer_init() instead of interrupt_init().
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 21:52:36 2008 +0100
- Cleanup DataFlash partition handling
- DataFlash partition information has become a mess. This patch
- defines a single partition scheme for Atmel DataFlashes. This partition
- scheme will be used by all AT91CAP9 and AT91SAM9 boards.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Fri Mar 28 08:47:45 2008 -0500
- ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
- When the version_string function in start.S is not 4-byte align,
- it will cause the compiler generates "unaligned opcodes detected
- in executable segment". This issue affects all ColdFire CPUs.
- By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
- it is not aligned.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit bae61eefe15b4d454060a7140e49ae58322be803
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Mar 25 15:41:15 2008 -0500
- ColdFire: Add dspi and serial flash support for MCF5445x
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 48ead7a7a922fceaf494e352abfab8216a41b417
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Mar 18 17:37:01 2008 -0500
- ColdFire: Remove R5200 board
- This board never went into production
- Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
- Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
- Author: Matthew Fettke <[matthew.fettke@gmail.com]>
- Date: Thu Jan 24 14:02:32 2008 -0600
- ColdFire: Added M5275EVB support.
- Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
- Author: Matthew Fettke <[matthew.fettke@gmail.com]>
- Date: Mon Feb 4 15:38:20 2008 -0600
- ColdFire: Added MCF5275 cpu support.
- Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Mar 17 12:14:11 2008 -0500
- ColdFire: Define bootdelay in configuration file for M52277EVB
- Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
- Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 77878f16cedee17161ff2336990970fffc6cea35
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Mar 17 12:09:07 2008 -0500
- ColdFire: Fix second memory Chipselect for M5475EVB
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 43d60642395a550956cb21d287c8cfa563913d28
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Mar 13 14:26:32 2008 -0500
- ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit eb14ebe813a0cb5d47905228da446a5ad692473b
- Author: Larry Johnson <lrj@acm.org>
- Date: Sun Mar 30 20:33:04 2008 -0500
- ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 02e3892021112f21067d9ed1d04ae4182725ba52
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Mar 31 12:20:48 2008 +0200
- ppc4xx: Small whitespace fix of esd patches
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 034394abb524785047c815f00dde8cdbdc1593c5
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Mar 30 18:52:44 2008 +0200
- ppc4xx: Cleanup PMC440 board support
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit a6cc6c37188d85c25d167a4515da86f48d9a583e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Mar 30 18:52:06 2008 +0200
- ppc4xx: Add ptm configuration variables for PMC440
- Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
- environment variables.
- Cleanup pci_target_init.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 7c91f51a2fe296909147f1646a1412729dd10b1d
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Mar 30 18:01:15 2008 +0200
- ppc4xx: Minor updates for DU440 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d5bffeb868d6b4d462f558dac43011027b6644b7
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:54:20 2008 -0500
- Blackfin: cleanup and overhaul common board init functions
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit b86b3416f874358acaf07519e7620cdb2145f75b
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:50:58 2008 -0500
- Blackfin: cleanup lib_blackfin/cache.c
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Mar 30 15:46:13 2008 -0400
- Blackfin: unify cpu and boot modes
- All of the duplicated code for Blackfin processors and boot modes have been
- unified. After all, the core is the same for all processors, just the
- peripheral set differs (which gets handled in the drivers).
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 880cc4381ea8360248cddcdf87a64566745a5724
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 22:52:35 2008 +0100
- Fix CFG_NO_FLASH compilation.
- Many Atmel boards have no "real" (NOR) flash on board, and rely only
- on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
- be present in a board configuration file, while still enabling flash
- commands like 'flinfo', 'protect', etc.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:58:13 2008 -0500
- Blackfin: BF537-stamp: cleanup spi flash driver
- This punts the old spi flash driver for a new/generalized one until the
- common one can be integrated.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Mar 30 11:34:34 2008 -0400
- Fix macro typo in common/cmd_mii.c
- This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
- actually applied the wrong patch.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Mar 30 16:39:53 2008 +0200
- use correct at91rm9200 register name in m501sk board
- This fixes a naming bug for at91rm9200 lowlevel init code:
- NOR boot flash is on chipselect 0, not chipselect 2. This
- makes code use the register name from chip datasheets.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
- Author: David Brownell <david-b@pacbell.net>
- Date: Fri Jan 18 12:55:00 2008 -0800
- use correct at91rm9200 register name
- This fixes a naming bug for at91rm9200 lowlevel init code:
- NOR boot flash is on chipselect 0, not chipselect 2. This
- makes code use the register name from chip datasheets.
- Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
- commit a3543d6dc52b0ba9c64016687cf32d600b31a476
- Author: David Brownell <david-b@pacbell.net>
- Date: Fri Jan 18 12:45:45 2008 -0800
- add missing ARM boards to MAKEALL
- Add some missing ARM boards to MAKEALL. These build correctly,
- unlike several of the boards already listed.
- Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
- commit 066bebd6353e33af3adefc3404560871699e9961
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Sun Mar 30 11:34:09 2008 +0100
- Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
- to prevent compilation error.
- Signed-off-by: Peter Pearse <peter.pearse@arm.com>
- commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
- Author: Guennadi Liakhovetski <[lg@denx.de]>
- Date: Sun Mar 30 11:32:30 2008 +0100
- Support for the MX31ADS evaluation board from Freescale
- This patch adds support for the MX31ADS evaluation board from Freescale,
- initialization code is copied from RedBoot sources, also provided by Freescale.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:32:27 2008 +0100
- Phytec Phycore-i.MX31 support
- This patch adds support for the Phytec Phycore-i.MX31 board
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit a147e56f03871bba4f05058d5e04ce7deb010b04
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:32:24 2008 +0100
- mx31 litekit support
- This patch adds support for the mx31 litekit board
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit d6674e0e2a6a1f033945f78838566210d3f28c95
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:32:21 2008 +0100
- add SMSC LAN9x1x Network driver
- This patch adds a driver for the following smsc network controllers:
- LAN9115
- LAN9116
- LAN9117
- LAN9215
- LAN9216
- LAN9217
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 8c8463cce44d849e37744749b32d38e1dfb12e50
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:32:16 2008 +0100
- add an i2c driver for mx31
- This patch adds an i2c driver for Freescale i.MX processors
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:30:43 2008 +0100
- core support for Freescale mx31
- This patch adds the core support for Freescale mx31
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 8bf69d81782619187933a605f1a95ee1d069478d
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:28:46 2008 +0100
- Separate omap24xx specific code from arm1136
- Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Sun Mar 30 11:23:05 2008 +0100
- Add pmdra into MAKEALL
- Signed-off-by: Peter Pearse <peter.pearse@arm.com>
- commit a574a73852a527779234e73e17e7597fd8128882
- Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
- Date: Sun Mar 30 11:21:58 2008 +0100
- Adds support for the Prodrive PMDRA board, based on a DM6441
- Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
- commit 1377b5583a48021d983e1fd565f7d40c89e84d63
- Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
- Date: Sun Mar 30 11:11:34 2008 +0100
- Removes all board specific code from the arch. part for DM644x (DaVinci) boards
- Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
- commit 1704dc20917b4f71e373e2c888497ee666d40380
- Author: Dirk Behme <dirk.behme@gmail.com>
- Date: Sun Mar 30 11:09:01 2008 +0100
- - Remove *_masked() functions as noted by Wolfgang
- - Adapt register naming to recent TI spec (sprue26, March 2007)
- - Fix reset_timer() handling
- - As reported by Pieter [1] the overflow fix introduced a
- delay of factor 16 (e.g 2 seconds became 32). While the
- overflow fix is basically okay, it missed to divide udelay by
- 16, too. Fix this.
- [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
- - Remove software division of timer count value (DIV(x)
- macro) and do it in hardware (TIM_CLK_DIV).
- Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
- and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
- the hints & testing!
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
- commit ac3315c26e143c31680750c9c13f027efbcc887e
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Thu Mar 6 16:45:44 2008 +0100
- new PHY @ e1000 - 2nd try
- Add 82541ER device with latest integrated IGP2 PHY.
- Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 20:22:53 2008 +0100
- SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
- GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
- a debug link (EDCL). The GRETH core is documented in GRIP.pdf
- available at www.gaisler.com.
- If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
- offloading etc.) can be determined by a bit in the control register.
- The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 233a8bcd94997f3f345833a3b82e836222f2a206
- Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Mar 17 17:08:22 2008 -0500
- Add CONFIG_MII_INIT in cmd_mii.c
- Provide common configuration in do_mii() to execute mii_init()
- for all cpu architectures
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit f605479de2deb11e834f31dfdb0af107c86aced6
- Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Mar 17 17:08:16 2008 -0500
- ColdFire: Fix FEC transmit issue for MCF5275
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
- Author: Aras Vaichas <arasv@magtech.com.au>
- Date: Wed Mar 26 09:43:57 2008 +1100
- DHCP request fix for Windows Server 2003
- Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
- delay before sending "DHCP Request" in net/bootp.c. Required to overcome
- interoperability problems with Windows Server 200x DHCP server when U-Boot
- client responds too fast for server to handle.
- Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 97bf85d784fbed485e652eb907589ad0d5cb7262
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 20:40:19 2008 +0100
- MTD/CFI: flash_read64 is defined a weak function (for SPARC)
- SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
- SPARC CPUs implement flash_read64 which calls __raw_readq.
- For current SPARC architectures (LEON2 and LEON3) each read from the
- FLASH must lead to a cache miss. This is because FLASH can not be set
- non-cacheable since program code resides there, and alternatively disabling
- cache is poor from performance view, or doing a cache flush between each
- read is even poorer.
- Forcing a cache miss on a SPARC is done by a special instruction "lda" -
- load alternative space, the alternative space number (ASI) is processor
- implementation spcific and can be found by including <asm/processor.h>.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 70431e8a7393b6b793f77957f95b999fc9a269b8
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Fri Mar 28 15:41:25 2008 +0100
- Make MPC83xx one step closer to full relocation.
- Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
- and use GOT relative reference.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5b2793a3f3de34d439232b05acc8af67a028fd35
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Thu Mar 27 14:34:43 2008 -0400
- mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
- This patch fixes eeprom page size so that you can now write more than
- 64 bytes at a time.
- It also makes the board take MAC addresses, if found, from EEPROM.
- User should place up to 4 addresses at offset 0x7f00, for
- eth{,1,2,3}addr. Any unused addresses should be zero. This group of
- four six-byte values should have it's CRC at the end. crc32 and
- eeprom commands can be used to accomplish this.
- If CRC fails, MAC addresses come from the environment. If CRC
- succeeds, the environment is overwritten at startup.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8f325cff31f6e745e6540014b131b9a97f61944c
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Fri Mar 28 15:15:38 2008 -0400
- mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
- Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
- controller on the PCI bus in Linux on the MPC8323ERDB.
- This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
- config file.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 10:19:07 2008 -0500
- mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
- in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
- 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
- and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
- REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
- convenience macros.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 10:18:53 2008 -0500
- mpc83xx: display ddr frequency in board_add_ram_info banner
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 10:18:40 2008 -0500
- mpc83xx: unreinvent mem_clk
- delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
- mem_*_clk for consistency's sake.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 14:31:23 2008 -0500
- mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:57:19 2008 +0800
- mpc83xx: enable the SATA interface on mpc837xemds board
- Enable the first two SATA interfaces on MPC837xEMDS board,
- The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:56:36 2008 +0800
- mpc83xx: initialize serdes for MPC837xEMDS boards
- This patch is stolen from Anton Vorontsov's patch
- for mpc837xerdb boards.
- The reference clk and xcorevdd voltage of serdes1/2
- is same between mpc837xemds and mpc837xerdb.
- 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
- 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
- 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit cc8e839abc80887ae832767b5930d40edd6d7eb7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Mar 28 14:09:04 2008 +0100
- ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
- Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
- interface. This usage can be configured with the jumper J6. This patch
- displays the current configuration upon bootup and changes the PCIe
- init loop, to only initialize the availabel PCIe slots.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 90447ecbbac8572457b6d8903073ac3f120995ba
- Author: Tor Krill <tor@excito.com>
- Date: Fri Mar 28 11:29:10 2008 +0100
- MTD/CFI: Add support for 16bit legacy AMD flash
- Add entry for 512Kx16 AMD flash to jedec_table.
- Read out 16bit device id if chipwidth is 16bit.
- Fixed coding style after Stefans feedback
- Signed-off-by: Tor Krill <tor@excito.com>
- commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Mar 28 11:02:53 2008 +0100
- ppc: Small change to CFG_MEM_TOP_HIDE description
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Mar 27 15:44:12 2008 +0900
- sh: Add support stat structure and stat.h
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
- Author: Mark Jonas <toertel@gmail.com>
- Date: Sat Mar 22 19:27:52 2008 +0100
- sh: Removed warning when compiling drivers/serial/serial_sh.c.
- Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit f309fa38929ffba71230c02330ffa42f4bba6333
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Mar 12 18:02:57 2008 +0900
- sh: Remove disable_ctrlc function from R7780MP
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Mar 12 17:55:15 2008 +0900
- sh: Add maintainer of R7780MP to MAINTAINER file
- Update MAINTAINER entry for R7780MP. And fix maintainer's name.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit f5e2466f7baa887a7df0c536333eea8231333497
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Mar 25 17:11:24 2008 +0900
- sh: Add support Renesas Solutions R2D plus board
- R2D plus is SH reference board used with SH7751R.
- This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
- one PCI bus, VGA, and two Ethernet controller.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit e92c95180bb5bc5fd4051598a9d60beaba48988d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Mar 12 12:15:29 2008 +0900
- sh: Add support SH4 cache control
- Add support SH4 cache control and flash_cache function
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 28e5efde4d925fcb34901d0030d0648de2da7e89
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Mon Mar 24 01:53:01 2008 +0900
- sh: Add support PCI host driver for SH7751/SH7751R
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Mon Mar 24 02:11:26 2008 +0900
- sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 566933278101c144d75361ea682678a326c1290d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Mar 12 12:10:28 2008 +0900
- sh: Add support SuperH SH7751/SH7751R
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3313e0e26224fc9a0c445124f3455058c696df84
- Author: Mark Jonas <toertel@gmail.com>
- Date: Mon Mar 10 11:37:10 2008 +0100
- sh: Added support for SH7720 based board MPR2.
- Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Mar 6 14:05:53 2008 +0900
- sh: Fix receive FIFO level register of SH4A
- Receive FIFO level register is different in SH4A.
- Because register is different, cannot occasionally receive data.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c133c1fb0b590662206b0eba70f4478ee0300a9a
- Author: Yusuke Goda <goda.yusuke@renesas.com>
- Date: Tue Mar 11 12:55:12 2008 +0900
- sh: Add support Renesas Solutions R7780MP
- Renesas Solutions R7780MP is a reference board on SH7780.
- This board has serial, 10/100 base Ethernet deivice, CF slot
- and VGA devices. This board can set extension board.
- Extension board has 10/100/1000 base Ethernet device, PCI slot,
- S-ATA, iDVR slot.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
- Author: Yusuke Goda <goda.yusuke@renesas.com>
- Date: Wed Mar 5 14:30:02 2008 +0900
- sh: Add support PCI of SuperH and SH7780
- This patch add support PCI of SuperH base code and SH7780 specific code.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit b55523efff2ae11f0b9ae3cc405893c32eb78156
- Author: Yusuke Goda <goda.yusuke@renesas.com>
- Date: Wed Mar 5 14:23:26 2008 +0900
- sh: Add support SH7780
- SH7780 is CPU of Renesas Technology.
- This CPU has
- - CPU clock 400MHz
- - PCI support
- - DDR-SDRAM controller
- - etc ...
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c2042f5952a686c414031309b8f244513bf578f0
- Author: goda.yusuke <goda.yusuke@renesas.com>
- Date: Fri Jan 25 20:46:36 2008 +0900
- sh: Add support Renesas Solutions Migo-R board
- Migo-R is a board based on SH7722 and has may devices.
- In this patch, supported SCIF, NOR flash and Ethernet.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 27 15:06:40 2008 +0100
- Fix host tool build breakage, take two
- Revert commit 87c8431f and fix build breakage so that the build continues
- to work on FC systems.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 09:36:47 2008 +0100
- ppc4xx: Enable ECC on LWMON5
- Since all ECC related problems seem to be resolved on LWMON5, this patch
- now enables ECC support.
- We have to write the ECC bytes by zeroing and flushing in smaller
- steps, since the whole 256MByte takes too long for the external
- watchdog.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
- Author: Larry Johnson <lrj@acm.org>
- Date: Mon Mar 17 11:10:35 2008 -0500
- ppc4xx: Updates to Korat-specific code
- This patch contains updates for changes for the Korat PPC440EPx board.
- These changes include:
- (1) Support for "permanent" and "upgradable" copies of U-Boot, as
- described in the new "doc/README.korat" file;
- (2) a new memory map for the registers in the board's CPLD;
- (3) a revised format for manufacturer's data in serial EEPROM; and
- (4) changes to track updates to U-Boot for the Sequoia board.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit f766cdf89b3a2a7634b8c5869f606150e332036c
- Author: Markus Brunner <super.firetwister@gmail.com>
- Date: Thu Mar 27 10:46:25 2008 +0100
- ppc4xx: PPC405EP Set EMAC noise filter bits
- This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
- which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
- disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
- Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
- Author: Mike Nuss <mike@terascala.com>
- Date: Wed Feb 20 11:54:20 2008 -0500
- ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
- On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
- after startup to change the speed of the clocks. This patch adds the
- option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
- initialization code will reconfigure the PLL to run the system with a CPU
- frequency of 667MHz and PLB frequency of 166MHz, without the need for an
- external EEPROM.
- Signed-off-by: Mike Nuss <mike@terascala.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Mar 27 09:12:40 2008 +0100
- new-image: Fix host tool build breakage
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 6fb4b640562a10daff0dbe537638d511b5b48650
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 27 10:24:03 2008 +0100
- ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9462732a3ec551c11862450902cd8ee1bedea6d9
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 10:23:43 2008 +0100
- ppc4xx: Add fdt support to Prodrive alpr
- Since this board will probably be ported to arch/powerpc in the
- near future, we add device tree support now. This way we are
- "ready" for arch/powerpc from now on.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
- Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
- Date: Mon Mar 17 09:27:56 2008 +0100
- ppc4xx: Enable cache support on the ALPR board
- Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
- commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 26 10:14:11 2008 +0100
- ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
- If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
- memory area will get subtracted from the top (end) of ram and won't get
- "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
- should gets passed the now "corrected" memory size and won't touch it
- either. This should work for arch/ppc and arch/powerpc. Only Linux board
- ports in arch/powerpc with bootwrapper support, which recalculate the
- memory size from the SDRAM controller setup, will have to get fixed
- in Linux additionally.
- This patch enables this config option on some PPC440EPx boards as a workaround
- for the CHIP 11 errata. Here the description from the AMCC documentation:
- CHIP_11: End of memory range area restricted access.
- Category: 3
- Overview:
- The 440EPx DDR controller does not acknowledge any
- transaction which is determined to be crossing over the
- end-of-memory-range boundary, even if the starting address is
- within valid memory space. Any such transaction from any PLB4
- master will result in a PLB time-out on PLB4 bus.
- Impact:
- In case of such misaligned bursts, PLB4 masters will not
- retrieve any data at all, just the available data up to the
- end of memory, especially the 440 CPU. For example, if a CPU
- instruction required an operand located in memory within the
- last 7 words of memory, the DCU master would burst read 8
- words to update the data cache and cross over the
- end-of-memory-range boundary. Such a DCU read would not be
- answered by the DDR controller, resulting in a PLB4 time-out
- and ultimately in a Machine Check interrupt. The data would
- be inaccessible to the CPU.
- Workaround:
- Forbid any application to access the last 256 bytes of DDR
- memory. For example, make your operating system believe that
- the last 256 bytes of DDR memory are absent. AMCC has a patch
- that does this, available for Linux.
- This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
- lwmon5, korat, sequoia
- The other remaining 440EPx board were intentionally not included
- since it is not clear to me, if they use the end of ram for some
- other purpose. This is unclear, since these boards have CONFIG_PRAM
- defined and even comments like this:
- PMC440.h:
- /* esd expects pram at end of physical memory.
- * So no logbuffer at the moment.
- */
- It is strongly recommended to not use the last 256 bytes on those
- boards too. Patches from the board maintainers are welcome.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 27 10:09:05 2008 +0100
- ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d56a3ce179688cde61073a3690e21703d68fafd7
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 25 17:51:13 2008 +0100
- ppc4xx: Correctly pass phyiscal FLASH base address into dtb
- The routine ft_board_setup() configures the EBC NOR mappings for the
- Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
- 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
- problem, we need to pass the corrected address here too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9ad31989de12ce5c67b07c4867ead47465655c4b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 16:35:12 2008 +0100
- ppc4xx: Fix compilation warning in 4xx_enet.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 16:20:49 2008 +0100
- ppc4xx: Add AMCC Glacier 406GT eval board support
- This patch adds support for the AMCC Glacier 460GT eval board.
- The main difference to the Canyonlands board are listed here:
- - 4 ethernet ports instead of 2
- - no SATA port
- - no USB port
- Currently EMAC2+3 are not working. This will be fixed in a later
- release.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 27 08:47:26 2008 +0100
- ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b9670dd85be6e0496ef2e231043c23cad9b1d903
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Mar 26 21:05:43 2008 +0100
- Fix out of tree building issue
- Currently U-Boot building in some external directory
- doesn't work. This patch tries to fix the problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Mar 26 18:13:33 2008 +0100
- README: update documentation (availability, links, etc.)
- Fix typo in README
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Mar 26 17:47:44 2008 +0100
- Fix compilation error in cmd_usb.c
- This patch fixes compilation error
- cmd_usb.c: In function 'do_usb':
- cmd_usb.c:552: error: void value not ignored as it ought to be
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit d8c82db482d6b535d12b419d6440b88bf7091c9b
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Mar 14 17:45:29 2008 -0500
- Add support for setting the I2C bus speed in fsl_i2c.c
- Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
- the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
- but fsl_i2c.c ignores it and uses conservative value when programming the
- I2C bus speed.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 27 00:03:57 2008 +0100
- Coding style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:55:32 2008 +0800
- drivers: add the support for Freescale SATA controller
- Add the Freescale on-chip SATA controller driver to u-boot,
- The SATA controller is used on the 837x and 8315 targets,
- The driver can be used to load kernel, fs and dtb.
- The features list:
- - 1.5/3 Gbps link speed
- - LBA48, LBA28 support
- - DMA and FPDMA support
- - Two ports support
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:54:44 2008 +0800
- ata: add the readme for SATA command line
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit cd54081cd479e542fc399b8a40651ff11a1ad849
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:53:24 2008 +0800
- ata: enable the sata initialize on boot up
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:52:36 2008 +0800
- ata: add the fis struct for SATA
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:51:44 2008 +0800
- ata: add the libata support
- add simple libata support in u-boot
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 8e9bb43429e50df55fa41932cbe65841ff579220
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:50:45 2008 +0800
- ata: make the ata_piix driver using new SATA framework
- original ata_piix driver is using IDE framework, not real
- SATA framework. For now, the ata_piix driver is only used
- by x86 sc520_cdp board. This patch makes the ata_piix driver
- use the new SATA framework, so
- - remove the duplicated command stuff
- - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
- - add the CONFIG_CMD_SATA define to sc520_cdp.h
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:49:44 2008 +0800
- ata: add the support for SATA framework
- - add the SATA framework
- - add the SATA command line
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:48:18 2008 +0800
- ata: merge the header of ata_piix driver
- move the sata.h from include/ to drivers/block/ata_piix.h
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 9eef62804d9695425b24c87b46a61a7fa74afee0
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:47:06 2008 +0800
- ata: merge the ata_piix driver
- move the cmd_sata.c from common/ to drivers/ata_piix.c,
- the cmd_sata.c have some part of ata_piix controller drivers.
- consolidate the driver to have better framework.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Mar 26 18:26:43 2008 +0100
- USB, Storage: fix a bug introduced in commit
- f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
- to only print only information on one storage device, but not for
- multiple.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Mar 26 17:47:44 2008 +0100
- Fix compilation error in cmd_usb.c
- This patch fixes compilation error
- cmd_usb.c: In function 'do_usb':
- cmd_usb.c:552: error: void value not ignored as it ought to be
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Mar 26 08:53:53 2008 -0500
- 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
- Provide a board_lmb_reserve helper function to ensure we reserve
- the page of memory we are using for the boot page translation code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 79679d80021ab095e639e250ca472fe526da02e2
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Mar 26 08:34:25 2008 -0500
- 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
- The following changes are needed to be inline with ePAPR v0.81:
- * r4, r5 and now always set to 0 on boot release
- * r7 is used to pass the size of the initial map area (IMA)
- * EPAPR_MAGIC value changed for book-e processors
- * changes in the spin table layout
- * spin table supports a 64-bit physical release address
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 25eedb2c1958a13110c7de1fc809b624053cc69c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 19 15:02:07 2008 -0500
- FSL: Clean up board/freescale/common/Makefile
- Each file that can be built here now follows some
- CONFIG_ option so that they are appropriately built
- or not, as needed. And CONFIG_ defines were added
- to various board config files to make sure that happens.
- The other board/freescale/*/Makefiles no longer need
- to reach up and over into ../common to build their
- individually needed files any more.
- Boards that are CDS specific were renamed with cds_ prefix.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 22:00:27 2008 -0600
- 85xx: Fix merge duplication
- ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5893b3d0a4084f87a06a5d3dc03db91206818941
- Author: James Yang <James.Yang@freescale.com>
- Date: Tue Feb 12 16:35:07 2008 -0600
- 85xx: Expand CCSR space with more DDR controller registers.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
- Author: James Yang <James.Yang@freescale.com>
- Date: Fri Feb 8 18:05:08 2008 -0600
- 85xx: Speed up get_ddr_freq() and get_bus_freq()
- get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
- called. However, get_sys_info() recalculates extraneous information when
- called each time. Have get_ddr_freq() and get_bus_freq() return memoized
- values from global_data instead.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e9ea679918fbc9a53fa2f2a904aac874ea736036
- Author: James Yang <James.Yang@freescale.com>
- Date: Fri Feb 8 16:46:27 2008 -0600
- 85xx: Show DDR memory data rate in addition to the memory clock frequency.
- Show the DDR memory data rate in addition to the memory clock
- frequency. For DDR/DDR2 memories the memory data rate is 2x the
- memory clock.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 591933ca6eabc440e6ed6967233aaf56fce464a3
- Author: James Yang <James.Yang@freescale.com>
- Date: Fri Feb 8 16:44:53 2008 -0600
- 85xx: get_tbclk() speed up and rounding fix
- Speed up get_tbclk() by referencing pre-computed bus clock
- frequency value from global data instead of sys_info_t. Fix
- rounding of result to nearest; previously it was rounding
- upwards.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Feb 6 01:19:40 2008 -0600
- Update SVR numbers to expand support
- FSL has taken to using SVR[16:23] as an SOC sub-version field. This
- is used to distinguish certain variants within an SOC family. To
- account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
- constants to reflect the larger value. We also add SVR numbers for all
- of the current variants. Finally, to make things neater, rather than
- use an enormous switch statement to print out the CPU type, we create
- and array of SVR/name pairs (using a macro), and print out the CPU name
- that matches the SVR SOC version.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Feb 6 01:12:57 2008 -0600
- Add the Freescale PCI device IDs
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Feb 14 11:04:23 2008 -0600
- 85xx: Added support for multicore boot mechanism
- Added the cpu command that provides a generic mechanism to get status,
- reset, and release secondary cores in multicore processors.
- Added support for using the ePAPR defined spin-table mechanism on 85xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 16:48:33 2008 -0600
- 85xx: Added support for multicore boot mechanism
- Added the cpu command that provides a generic mechanism to get status,
- reset, and release secondary cores in multicore processors.
- Added support for using the ePAPR defined spin-table mechanism on 85xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f69766e4b5d47ecd3aa58677a8da875694f364f2
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 30 14:55:14 2008 -0600
- 85xx: Add the concept of CFG_CCSRBAR_PHYS
- When we go to 36-bit physical addresses we need to keep the concept of
- the physical CCSRBAR address seperate from the virtual one.
- For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 26 15:38:47 2008 +0100
- Coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Wed Mar 26 13:02:13 2008 +0100
- Add CFG_RTC_DS1337_NOOSC to turn off OSC output
- The default settings for RTC DS1337 keeps the OSC
- output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
- turn it off.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 26 11:48:46 2008 +0100
- Cleanup coding style, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 26 10:40:12 2008 +0100
- README: update documentation (availability, links, etc.)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
- Author: Aras Vaichas <arasv@magtech.com.au>
- Date: Tue Mar 25 12:09:07 2008 +1100
- USB Storage, add meaningful return value
- This patch changes the "usb storage" command to return success if it
- finds a USB storage device, otherwise it returns error.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 18e69a35efbb078403db0c0063986470dad7d082
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Mar 14 23:20:18 2008 +0300
- 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
- Linux understands "host" (default), "peripheral" and "otg" (broken).
- Though, U-Boot doesn't restrict dr_mode variable to these values (think
- of renames in future).
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c7604783b236e368f225efb7b3efb418fe20b404
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Mar 14 23:20:30 2008 +0300
- tsec: fix link detection for the RTL8211B PHY
- RTL8211B sets link state register after autonegotiation complete,
- so with bootdelay=0 RTL8211B will report lack of the link.
- To fix this, we should wait for aneg to complete, even if the
- link is currently down.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:47:09 2008 +0300
- mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
- device_type = "soc" is being deprecated, newer device trees will use
- "fsl,soc" and/or "fsl,immr" for the soc nodes.
- This patch also adds clock-frequency property for soc nodes (the same
- value as bus-frequency).
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
- Author: Joe D'Abbraccio <ljd015@freescale.com>
- Date: Mon Mar 24 13:00:59 2008 -0400
- Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
- With the original value of 1/2 clock cycle delay, the system ran relatively
- stable except when we run benchmarks that are intensive users of memory.
- When I run samba connected disk with a HDBENCH test, the system locks-up
- or reboots sporadically.
- Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
- commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Mar 24 12:44:13 2008 -0500
- mpc83xx: Set PCI I/O bus-address base to zero.
- The device trees for these boards describe PCI I/O as starting from
- address zero from the device's perspective.
- Placing I/O elsewhere may cause problems with certain PCI boards, and may
- cause problems with Linux.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:47:05 2008 +0300
- mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
- At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
- This patch fixes "system time drifting" problem.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:47:02 2008 +0300
- mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
- This is needed to update /choosen/linux,stdout-path properly.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:47:00 2008 +0300
- mpc83xx: MPC8360E-RDK: add dhcp command
- Plus modify environment to use it and remove bootfile env variable,
- it is internal and CONFIG_BOOTFILE is used for these purposes.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:57 2008 +0300
- mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
- Current DDR setup easily causes memory corruption, this patch fixes it.
- Also fix TIMING_CFG0_MRS_CYC definition.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:53 2008 +0300
- mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
- This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
- controller and FHCI (QE USB).
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 7ad959490962e6842648d87d4bd795ea6cdcce67
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:51 2008 +0300
- mpc83xx: MPC8360E-RDK: add support for NAND
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 9a3e832aeb491861d029991241572ebdf4b5b61b
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:46 2008 +0300
- mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
- This is needed for BCM PHYs to work on this board.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:34 2008 +0300
- uec: add support for Broadcom BCM5481 Gigabit PHY
- This patch adds basic support for Broadcom BCM5481 PHY.
- RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
- Peter Barada <peterb@logicpd.com>.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 6a600c3a1876bc203445df4f0fd6b12648259666
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:28 2008 +0300
- uec: add support for RGMII_RXID interface mode
- PHY drivers will use it to setup software delay between RXD and RXC
- signals.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:24 2008 +0300
- uec: add support for gbit mii status readings
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:47 2008 +0300
- 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
- This is primarily for the early console support.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:43 2008 +0300
- 83xx: initialize serdes for MPC837XRDB boards
- On the MPC8377ERDB: 2 SATA and 2 PCI-E.
- On the MPC8378ERDB: 2 PCI-E
- On the MPC8379ERDB: 4 SATA
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 453316a2a19642d8afcbca7452e40a6b44a197b1
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:32 2008 +0300
- 83xx: serdes setup routines
- This patch adds few routines to configure serdes on 837x targets.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:27 2008 +0300
- 83xx: split COBJS onto separate lines
- ..plus get rid of some #ifdefs in the .c files.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:23 2008 +0300
- 83xx: nand support for MPC837XRDB boards
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 82e45a204190593e8613145a928f998fb8c909c4
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Tue Mar 18 21:44:41 2008 -0400
- Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 0fa7a1b4719e325fce332689fb8754ec166191ff
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Thu Mar 20 13:15:39 2008 -0400
- mpc8323erdb: remove RTC and add EEPROM
- There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Thu Mar 20 13:15:34 2008 -0400
- mpc8323erdb: Improve the system performance
- The following changes are based on kernel UCC ethernet performance:
- 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
- 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
- switch to enable this setting.
- The following changes are based on the App Note AN3369 and
- verified to improve memory latency using LMbench:
- 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
- 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
- previously.
- 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
- Twr=15ns, and this was already the setting in DDR_MODE)
- 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
- Trp=15ns)
- 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
- Tras=40ns)
- 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
- Trcd=15ns)
- 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
- Trfc=75ns)
- 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
- on Tfaw=50ns)
- 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
- on CL=3 and WL=2).
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit fc549c871f43933396a5b3e21d897023d4b31b8d
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Thu Mar 20 13:15:28 2008 -0400
- mpc8323erdb: use readable DDR config macros
- Use available shift/mask macros to define DDR configuration.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 89c7784ed90ba50301eec521144f95111e472906
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Feb 8 13:15:55 2008 -0600
- 83xx: Add Vitesse VSC7385 firmware uploading
- Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
- the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
- Cleaned up the board header files to make selecting the VSC7385 easier to
- control.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Feb 8 13:15:54 2008 -0600
- NET: Add Vitesse VSC7385 firmware uploading
- The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
- and other boards. A small firwmare must be uploaded to its on-board memory
- before it can be enabled. This patch adds the code which uploads firmware
- (but not the firmware itself).
- Previously, this feature was provided by a U-Boot application that was
- made available only on Freescale BSPs. The VSC7385 firmware must still
- be obtained separately, but at least there is no longer a need for a separate
- application.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 26 00:52:10 2008 +0100
- Coding Style cleanyp; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 43ddd9c820fec44816188f53346b464e20b3142d
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Sat Mar 22 14:23:49 2008 -0400
- Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
- These defines embedded the u-boot env variables and/or the bd_t structure
- in the fdt blob. The conclusion of discussion on the u-boot email list
- was that embedding these in the fdt blob is not useful: there are better
- ways of passing the data (in fact, the fdt blob itself replaces the
- bd_t struct).
- The only board that enables these is the stxxtc and they don't appear
- to be used by linux.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 22ed2285743359fd1fe73e411dff914b2256e68f
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Mar 17 10:49:25 2008 +0100
- rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Mar 17 08:54:06 2008 +0900
- Add Flex-OneNAND booting support
- Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
- using a NOR Flash interface. This on-chip integration enables system designers
- to reduce external system logic and use high-density NAND Flash
- in applications that would otherwise have to use more NOR components.
- Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
- in more flexible way. While MLC area of Flex-OneNAND can be used to store data
- that require low reliability and high density, SLC area of Flex-OneNAND
- to store data that need high reliability and high performance. Flex-OneNAND
- can let users take advantage of storing these two different types of data
- into one chip, which is making Flex-OneNAND more cost- and space-effective.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit c512389cc4a10253249271ff6c887c6dab1f0db2
- Author: André Schwarz <andre.schwarz@matrix-vision.de>
- Date: Thu Mar 13 13:50:52 2008 +0100
- MPC5200: support setup without FEC
- Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
- defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit aa3511e422946041ef626f80a05ae5e8bfc700e6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 18:05:46 2008 -0600
- FSL: Move board/mpc8266ads under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7f1d846e5c5754449c286587d099d85246062772
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 18:05:47 2008 -0600
- FSL: Move board/mpc7448hpc2 under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 18:05:45 2008 -0600
- FSL: Move board/mpc8260ads under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
- Author: goda.yusuke <goda.yusuke@renesas.com>
- Date: Wed Mar 5 17:08:33 2008 +0900
- net: Add support AX88796L ethernet device
- AX88796L is device of NE2000 compatible.
- This patch support AX88796L ethernet device.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit e0a6140dd381e1eed1ada2291166ef2616d8822b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 25 22:50:41 2008 +0100
- ne2000 driver: change #ifdef to Makefile conditional compilation
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e710185aae90c64d39c2d453e40e58ceefe4f250
- Author: goda.yusuke <goda.yusuke@renesas.com>
- Date: Wed Mar 5 17:08:20 2008 +0900
- net: Divided code of NE2000 ethernet driver
- There are more devices of the NE2000 base.
- A present code is difficult for us to support more devices.
- To support more NE2000 clone devices, separated the function.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 395bce4f59a507a60a475f7ee46bed47de9482df
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Feb 24 23:58:13 2008 -0500
- net/Blackfin: move on-chip MAC driver into drivers/net/
- The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
- directory, but it is not board specific, so relocate it to the drivers dir
- so that other Blackfin ports can utilize it.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Feb 24 23:52:35 2008 -0500
- smc91111: use SSYNC() rather than asm(ssync) for Blackfin
- Since the "ssync" instruction may have hardware anomalies associated with
- it, have the smc91111 driver use the SSYNC macro rather than invoking it
- directly. We workaround all the anomalies via this macro.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
- Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
- Date: Sun Feb 17 22:57:47 2008 +0000
- 8xx: Update OF support on 8xx
- This patch does some shifting around of OF support on 8xx.
- Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
- commit 9c666a7db0b2285a270c68810889ce7d5dba304b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Feb 15 15:16:18 2008 -0600
- ppc: Allow boards to specify how much memory they can map
- For historical reasons we limited the stack to 256M because some boards
- could only map that much via BATS. However newer boards are capable of
- mapping more memory (for example 85xx is capble of doing up to 2G).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
- Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
- Date: Fri Feb 15 01:05:58 2008 +0000
- 8xx : Add OF support to Adder875 board port - resubmit
- Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
- commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Feb 14 20:44:42 2008 -0600
- Add setexpr command
- Add a simple expr style command that will set an env variable as the result
- of the command. This allows us to do simple math in shell. The following
- operations are supported: &, |, ^, +, -, *, /.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3f105faa64b9826e088711fdfcaa70cb1230397a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 17:27:48 2008 -0600
- FSL: Move board/mpc7448hpc2 under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 449c703374a8868453425e15da7e2f76221b72e4
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 17:21:43 2008 -0600
- FSL: Move board/mpc8266ads under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5863577989ad689427bb750107e9a75f1c1645d2
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 16:41:41 2008 -0600
- FSL: Move board/mpc8260ads under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8a773983957ee6c4aa344469b742f29c7d26afbd
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:08 2008 +0900
- [MIPS] Move gth2_config from ARM section to MIPS
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Fix dcache_status()
- You can't judge UNCACHED by Config.K0 LSB.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Introduce _machine_restart
- Handles machine specific functions by using weak functions.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit decaba6f5cf386d569ac3997bebb871b966c6b18
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Cleanup CP0 Status initialization
- Add setup_c0_status from Linux. For the moment we disable interrupts, set
- CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
- reset-time configuration and will work well across most processors.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Initialize CP0 Cause before setting up CP0 Status register
- Without this change, we'll be suffering from deffered WATCH exception
- once Status.EXL is cleared. Make sure Cause.WP is cleared.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 26138623230ca2bad3c78e05a65527ea70c8b688
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
- Move things to appropriate place.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:06 2008 +0900
- [MIPS] Implement flush_cache()
- We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
- don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
- function is used not only in U-Boot specfic programs but also at loading
- target binaries.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:06 2008 +0900
- [MIPS] Fix I-/D-cache initialization loops
- Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
- again per a loop for I-cache initialization. But according to 'See MIPS
- Run', we're encouraged to use three separate loops rather than combining
- them *for both I- and D-cache*. This patch tries to fix this.
- In accordance with fixing above, mips_init_[id]cache are separated from
- mips_cache_reset(), and rewrite cache loops are completely rewritten with
- useful macros.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 1898840797c7f50799377bd5b285a8a93a82c419
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:06 2008 +0900
- [MIPS] Replace memory clearance code with f_fill64
- This routine fills memory with zero by 64 bytes, and is 64-bit capable.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:06 2008 +0900
- [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
- This patch replaces the current function definitions with NESTED, LEAF
- and END macro. They specify some more additional information about the
- function; an alignment of symbol, type of symbol, stack frame usage, etc.
- These information explicitly tells the assembler and the debugger about
- the types of code we want to generate.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 282223a607c611425fa33f5428f8eae6636972bb
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 11:43:17 2008 +0900
- [MIPS] asm headers' updates
- Make some asm headers adjusted to the latest Linux kernel.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 11:39:29 2008 +0900
- [MIPS] Request for the 'mips_cache_lock()' removal
- The initial intension of having mips_cache_lock() was to use the cache
- as memory for temporary stack use so that a C environment can be set up
- as early as possible.
- But now mips_cache_lock() follow lowlevel_init(). We've already have the
- real memory initilaized at this point, therefore we could/should use it.
- No reason to lock at all.
- Other problems:
- Cache locking is not consistent across MIPS implementaions. Some imple-
- mentations don't support locking at all. The style of locking varies -
- some support per line locking, others per way, etc. Some parts use bits
- in status registers instead of cache ops. Current mips_cache_lock() is
- not necessarily general-purpose.
- And this is worthy of special mention; once U-Boot/MIPS locks the lines,
- they are never get unlocked, so the code relies on whatever gets loaded
- after U-Boot to re-initialize the cache and clear the locks. We're sup-
- posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
- but leave the situation as it is for a long time.
- For these reasons, I proposed the removal of mips_cache_lock() from the
- global start-up code.
- This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
- *things have changed*. If he wants the same behavior as before, he needs
- to have CFG_INIT_RAM_LOCK_MIPS in his config file.
- If we don't have any regression report through several releases, then
- we'll remove codes entirely.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Acked-by: Andrew Dyer <amdyer@gmail.com>
- commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Mar 24 11:30:54 2008 +0100
- lwmon5 SYSMON POST: fix backlight control
- If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
- run on the board, then the SYSMON POST controls the display backlight
- (doesn't switch backlight ON if POST FAILED, and does switch the
- backlight ON if PASSED).
- If not, then the video driver controls the display backlight (just
- switch ON the backlight upon initialization).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Mar 24 11:29:14 2008 +0100
- lwmon5 SYSMON POST: fix handling of negative temperatures
- Fix errors in the LWMON5 Sysmon POST for negative temperatures.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Fri Mar 7 16:04:25 2008 +0900
- pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
- In current source code, when the device number of PCI is 0, process PCI
- bridge without fail. However, when the device number is 0, it is not PCI
- always bridge. There are times when device of PCI allocates.
- When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
- use this patch.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Fri Mar 21 09:18:40 2008 +0100
- LWMON5: fix dsPIC POST
- Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
- commit 388b82fddc7c05596f3f615f190da0448227dc82
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:23:13 2008 +0100
- [new uImage] Enable new uImage support for the pcs440ep board.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:23:13 2008 +0100
- [new uImage] Do not compile new uImage format support by default
- Disable default building of new uImage format support in preparation
- for merge with the master. Support for new format can be enabled on
- a per-board basis, by defining the following in the board's config file:
- #define CONFIG_FIT 1
- #define CONFIG_OF_LIBFDT 1
- This can be optionally defined to give more verbose output:
- #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit dafaede8a46c7159310239e036c93e31c6374487
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:20:31 2008 +0100
- [new uImage] Disable debuging output in preparation for merge with master
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit fbe7a155027beacebaee9b32e1ada781fe924bca
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 19:38:45 2008 +0100
- [new uImage] Compilation and new uImage handling fixes for imxtract
- Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
- include/config_cmd_default.h. Fix few warnings and handling of new format
- images.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 36cc8cbb3379d5166f882641123521735c469f92
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:10:19 2008 +0100
- [new uImage] Fix autoscr command used with new uImage format
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 43142e817f0597be412e7cbe19413f5532eafa5d
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:10:19 2008 +0100
- [new uImage] Fix *.its files location in documentation
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 20 22:01:38 2008 +0100
- lwmon5 POST: remove unreachable code
- plus some coding style cleanup
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Mar 20 17:56:04 2008 +0300
- LWMON5: POST RTC fix
- Modify the RTC API to provide one a status for the time reported by
- the rtc_get() function:
- 0 - a reliable time is guaranteed,
- < 0 - a reliable time isn't guaranteed (power fault, clock issues,
- and so on).
- The RTC chip drivers are responsible for providing this info if the
- corresponding chip supports such functionality. If not - always
- report that the time is reliable.
- The POST RTC test was modified to detect the RTC faults utilizing
- this new rtc_get() feature.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Mar 19 14:25:14 2008 +0100
- TQM5200B: update MTD partition layout
- - insert partition for dtb blob to TQM5200B MTD layout
- - set env variables dependent on the configured board
- (TQM5200 or TQM5200B)
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit f0105727d132f56a21fa3ed8b162309cca6cac44
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 07:09:26 2008 +0100
- CFI: Small cleanup for FLASH_SHOW_PROGRESS
- With this patch we don't need that many #ifdef's in the code. It moves
- the subtraction into the macro and defines a NOP-macro when
- CONFIG_FLASH_SHOW_PROGRESS is not defined.
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 9a042e9ca512beaaa2cb450274313fc477141241
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Sat Mar 8 13:48:01 2008 -0500
- Flash programming progress countdown.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Mar 19 10:00:06 2008 +0100
- [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Feb 18 18:09:04 2008 +1100
- libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
- Since fdt_node_offset_by_compatible() was converted to the new
- fdt_next_node() iterator, a chunk of initialization code became
- redundant, but was not removed by oversight. This patch cleans it up.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit d0ccb9b140b472039732de102fc14597eedb14df
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Feb 18 18:06:31 2008 +1100
- libfdt: Trivial cleanup for CHECK_HEADER)
- Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
- However, there are a handful of functions (fdt_move, rw_check_header,
- fdt_open_into) from other files which could also use it (currently
- they open-code something more-or-less identical). Therefore, this
- patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
- places.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit fe30a354cdbb808b5f15366a935b151a4ccee74f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 20 14:32:36 2008 -0600
- Fix fdt boardsetup command parsing
- The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 804887e6001e2f00bea11431bf34d6d472512cda
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Feb 15 03:34:36 2008 -0600
- Add sub-commands to fdt
- fdt header - Display header info
- fdt bootcpu <id> - Set boot cpuid
- fdt memory <addr> <size> - Add/Update memory node
- fdt rsvmem print - Show current mem reserves
- fdt rsvmem add <addr> <size> - Add a mem reserve
- fdt rsvmem delete <index> - Delete a mem reserves
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Thu Feb 14 16:50:34 2008 +1100
- libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
- fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
- node which has NOP tags interspersed with its properties. In this
- case fdt_add_subnode_namelen() will put the new subnode before the
- first NOP tag, even if there are properties after it, which will
- result in an invalid blob.
- This patch fixes the bug, and adds a testcase for it.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Tue Feb 12 11:58:31 2008 +1100
- libfdt: Add and use a node iteration helper function.
- This patch adds an fdt_next_node() function which can be used to
- iterate through nodes of the tree while keeping track of depth. This
- function is used to simplify the iteration code in a lot of other
- functions, and is also exported for use by library users.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Fri Jan 11 14:55:05 2008 +1100
- libfdt: Add fdt_set_name() function
- This patch adds an fdt_set_name() function to libfdt, mirroring
- fdt_get_name(). This is a r/w function which alters the name of a
- given device tree node.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 23e20aa6488e6c0622496549861bfdc74108debe
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Tue Mar 18 13:33:30 2008 +0100
- lwmon5: Fix register test logic to match the specific GDC h/w.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 46bc0a938779aa1d664b847d36b08aa00f22e539
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Tue Mar 18 13:27:57 2008 +0100
- Fix backlight in the lwmon5 POST.
- Backlight was switched on even when temperature was too low.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Wed Feb 6 18:48:36 2008 +0100
- The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
- To enable this, alternative, configuration the U-Boot board configuration
- file for lwmon5 includes the definitions of alternative addresses for header
- (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
- The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
- and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
- lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 17:11:53 2008 +0100
- Add support for the lwmon5 board reset via GPIO58.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 17:09:55 2008 +0100
- Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:11:03 2008 +0100
- The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:10:42 2008 +0100
- The patch adds new POST tests for the Lwmon5 board. These are:
- * External Watchdog test;
- * dsPIC tests;
- * FPGA test;
- * GDC test;
- * Sysmon tests.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit c2ed33efbfff5767bca236828e021c55fd547b6c
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:10:01 2008 +0100
- Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- commit 3a5d1e7f1309998791702b2a559e3126781746b9
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Tue Mar 18 13:33:30 2008 +0100
- lwmon5: Fix register test logic to match the specific GDC h/w.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Tue Mar 18 13:27:57 2008 +0100
- Fix backlight in the lwmon5 POST.
- Backlight was switcehd on even when temperature was too low.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Wed Feb 6 18:48:36 2008 +0100
- The patch introduces the alternative configuration of the log buffer for
- the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
- the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
- PPC440EPX_GPT0_COMP5).
- To enable this, alternative, configuration the U-Boot board configuration
- file for lwmon5 includes the definitions of alternative addresses for header
- (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
- The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
- and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
- lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit ff818b21b069f4bc9cb73373cc5a16014be101b7
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 17:11:53 2008 +0100
- Add support for the lwmon5 board reset via GPIO58.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 17:09:55 2008 +0100
- Some fixes to dspic, fpga, and gdc post tests for lwmon5.
- Disable external watch-dog for now.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit e262efe35742c1ad4b0966ff501efc26f34a0aec
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:11:03 2008 +0100
- The patch introduces the CRITICAL feature of POST tests. If the test
- marked as POST_CRITICAL fails then the alternative, post_critical,
- boot-command is used. If this command is not defined then U-Boot
- enters into interactive mode.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 65b20dcefc89618193fa51947968dada91e4c778
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:10:42 2008 +0100
- The patch adds new POST tests for the Lwmon5 board.
- These are:
- * External Watchdog test;
- * dsPIC tests;
- * FPGA test;
- * GDC test;
- * Sysmon tests.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:10:01 2008 +0100
- Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 18 17:35:51 2008 +0100
- HMI1001: fix compile problem.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1f2a9970109cebf7446e0503b10b71f8673045ee
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:32:30 2008 -0500
- Blackfin: BF537-stamp: drop board-specific flash driver for CFI
- The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
- for the board specific driver at all. Just use the common CFI driver.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:36:14 2008 -0500
- Blackfin: add proper ELF markings to some assembly functions
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:35:17 2008 -0500
- Blackfin: new cplbinfo command for viewing cplb tables
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit aadb72503cd1602349a5fe53356d5f55ecc1b900
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:37:51 2008 -0500
- Blackfin: update MAINTAINERS list
- Add maintainer information for the Blackfin boards.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:26:48 2008 -0500
- Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
- Stop tying things to the processor that should be tied to other defines and
- change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
- system to select the -mcpu option.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 86a20fb920bd198105acf7b1191117f566d637ed
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sat Feb 16 07:40:36 2008 -0500
- Blackfin: move bootldr command to common code
- This moves the Blackfin-common bootldr command out of the BF537-STAMP
- specific board directory and into the common directory so that all Blackfin
- boards may utilize it.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit decbe029b2a9d3333d02c433389b1c821eea96d7
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Mar 14 11:05:20 2008 +0100
- mgcoge: update configuration
- Fix configuration for mgcoge board
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit c136724cda0219c49f1d4b346f00da29b14fdf14
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 16 01:22:59 2008 +0100
- drivers/rtc/Makefile: keep list sorted
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
- Author: Tor Krill <tor@excito.com>
- Date: Sat Mar 15 15:40:26 2008 +0100
- Add support for Intersil isl1208 RTC
- Signed-off-by: Tor Krill <tor@excito.com>
- commit 0210cff3d079d97b2156b13685ee8de368e68a1a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Mar 15 17:36:41 2008 +0100
- cramfs: Fix ifdef
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 16 01:12:58 2008 +0100
- Conding style cleanup
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 41712b4e8c95dff23354bcd620e1f9477160c190
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 5 12:31:53 2008 +0100
- ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
- This patch adds USB OHCI support to the Canyonlands board port. It also
- enables EXT2 support.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2596f5b9d353ff3e4387a3325d05740f16958038
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 5 12:29:32 2008 +0100
- usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
- This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
- way a board just needs to define this new option to enable the "force
- NoPowerSwitching mode" instead of adding new CPU/architecture defines
- to the USB source itself.
- This new option will be used first with the new AMCC 460EX Canyonlands
- board port, which will be posted in a few days.
- This patch also fixes a small compilation problem when DEBUG is enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 71665ebf88408ff2acb762af47989fd4365b321a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Mar 3 17:27:02 2008 +0100
- ppc4xx: Add Canyonlands NAND booting support
- 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
- NAND devices. The only bootstrap option for NAND booting is option F for
- 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
- EEPROM needs to be programmed accordingly.
- This patch adds basic NAND booting support for the AMCC Canyonlands aval
- board and also adds support to the "bootstrap" command, to enable NAND
- booting I2C setting.
- Tested with 512 byte page NAND device (32MByte) on Canyonlands.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 16:53:00 2008 +0100
- ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
- This patch adds support for the AMCC Canyonlands 460EX evaluation
- board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 16:52:24 2008 +0100
- ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
- This patch adds support for the AMCC Canyonlands 460EX evaluation
- board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 16:51:17 2008 +0100
- ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
- This patch adds support for the AMCC Canyonlands 460EX evaluation
- board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:11:43 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:11:18 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 999ecd5aca381984d8ebbeb207ece82a1c275577
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:07:10 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:05:50 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:05:26 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 56e410178375d9f20be25fb24e180974f0ae120b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 19 22:07:57 2008 +0100
- ppc4xx: interrupt.c reworked
- This patch is a rework of the 4xx interrupt handling done while
- adding the 460EX/GT support. Interrupts are needed on 4xx for the
- EMAC driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 19 22:01:57 2008 +0100
- ppc4xx: program_tlb now uses 64bit physical addess
- This patch changes the physical addess parameter from 32bit to 64bit.
- This is needed for 36bit 4xx platforms to access areas located
- beyond the 4GB border, like SoC peripherals (EBC etc.).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c3307fa186af85771924c434997089b8104c0a46
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 19 21:58:25 2008 +0100
- ppc4xx: miiphy.c reworked
- While adding the 460EX/GT support I reworked the 4xx miiphy code. It
- badly neede some cleanup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 19 16:21:49 2008 +0100
- rtc: Add M41T62 support
- This patch add support for the STM M41T62 RTC. It is used and tested
- on the AMCC Canyonlands 406EX platform.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 217d383e201adc7f2271145ae345ea5eae2b7170
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:46:43 2008 +0100
- ppc4xx: Add 405GPr based MCU25 board specific files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:46:42 2008 +0100
- ppc4xx: Add 405GPr based MCU25 board config file
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit b05f35436b733a240559e77e46bed8439665ecc5
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:46:41 2008 +0100
- ppc4xx: Add 405GPr based MCU25 board. Global files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:37:02 2008 +0100
- ppc4xx: HCU4/5. remove obsolete hcu_flash.c
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit a079494853cc2bfeddb26673219db0b4b2b31566
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:37:01 2008 +0100
- ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
- Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
- the FLASH_CFI_LEGACY et al. config options.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit e4170e5a50c8110f792bc37472833ae669d69951
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 13:52:25 2008 +0100
- ppc4xx: Fix comment in 405EX DDR2 init code
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Mar 14 16:22:34 2008 +0100
- Add MD5 support to the new uImage format
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 0ede0c383530a418cf98be9122371a86573cd0db
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Mar 14 16:22:34 2008 +0100
- Add the MD5 algorithm
- MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
- calculated using the md5() function -- see include/md5.h for details.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Mar 14 16:04:54 2008 +0100
- tools/setlocalversion: use a git-describe-ish format
- Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
- where 'nnnnn' is the number of commits since the last tag (i.e.,
- 1.3.2-rc3). This makes it much easier to recognize "newer" versions
- and to see how much has been changed since the referenced tag.
- Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c6dc21c84de0f159a1752c5ebd33cff843f63609
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 13 14:32:03 2008 +0100
- HMI1001: add support for MPC5200 Rev. B processors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 13 14:29:49 2008 +0100
- TQM5200: remove dead code
- This board never used a MGT5100 processor.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 12:14:15 2008 +0100
- [new uImage] Fix build issue on ARM
- ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3310c549a73a949430bfda90876df7552a1dab0c
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 12:13:13 2008 +0100
- [new uImage] Add new uImage format documentation and examples
- Create doc/uImage.FIT documentation directory with the following files:
- - command_syntax_extensions.txt : extended command syntax description
- - howto.txt : short usage howto
- - source_file_format.txt : internal new uImage format description
- Add example image source files:
- - kernel.its
- - kernel_fdt.its
- - multi.its
- Update README appropriately.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 1ec73761d2e247078f4520a265d463e8b73391a2
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:35:52 2008 +0100
- [new uImage] Fix definition of common bootm_headers_t fields
- verify, autostart and lmb fields are used regardless of CONFIG_FIT
- setting, move their definitions to common section.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1d1cb4270edc6a99276834064069717f9782c491
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:35:51 2008 +0100
- [new uImage] Fix build problems on trab board
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit f773bea8e11f4a11c388dcee956b2444203e6b65
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:35:46 2008 +0100
- [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
- Save FIT configuration provied in the first bootm argument and use it
- when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
- arguments are not specified.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:01 2008 +0100
- [new uImage] More verbose kernel image uncompress error message
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:01 2008 +0100
- [new uImage] Use show_boot_progress() for new uImage format
- This patch allocates a set of show_boot_progress() IDs for new uImage format
- and adds show_boot_progress() calls in new uImage format handling code.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:01 2008 +0100
- [new uImage] Add new uImage fromat support to fpga command
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:01 2008 +0100
- [new uImage] Add new uImage format handling to other bootm related commands
- Updated commands:
- docboot - cmd_doc.c
- fdcboot - cmd_fdc.c
- diskboot - cmd_ide.c
- nboot - cmd_nand.c
- scsiboot - cmd_scsi.c
- usbboot - cmd_usb.c
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:00 2008 +0100
- [new uImage] Add new uImage format support to imgextract command
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:00 2008 +0100
- [new uImage] Add new uImage format support to autoscript routine
- autoscript() routine is updated to accept second argument, which
- is only used for FIT images and provides a FIT subimage unit name.
- autoscript() routine callers must now pass two arguments. For
- non-interactive use (like in cmd_load.c, cmd_net.c), new environment
- variable 'autoscript_uname' is introduced and used as a FIT
- subimage unit name source.
- autoscript command accepts extended syntax of the addr argument:
- addr:<subimg_uname>
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit cd7c596e9f561dbbc17b717277438aee78cde14f
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:00 2008 +0100
- [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
- This patch updates architecture specific implementations of
- do_bootm_linux() adding new uImage format handling for
- operations like get kernel entry point address, get kernel
- image data start address.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 3dfe110149311425919e6d6a14b561b4207498f1
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:32:59 2008 +0100
- [new uImage] Add node offsets for FIT images listed in struct bootm_headers
- This patch adds new node offset fields to struct bootm_headers
- and updates bootm_headers processing code to make use of them.
- Saved node offsets allow to avoid repeating fit_image_get_node() calls.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit bc8ed486b125452ba3bd8344f052f437329150c5
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:32:53 2008 +0100
- [new uImage] ppc: Add new uImage format support to FDT handling routines
- Support for new (FIT) format uImages is added to powerpc specific
- boot_get_fdt() routine which now recognizes, sanity checks FIT image
- and is able to access data sections of the requested component image.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit a44a269a905f924b420020506a4d7d7eedcc0eaf
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:14:57 2008 +0100
- [new uImage] Re-enable interrupts for non automatic booting
- Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
- environment variable is not set to 'yes'.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit d985c8498c4e47095820da97aa722381d39172c5
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:14:38 2008 +0100
- [new uImage] Remove unnecessary arguments passed to ramdisk routines
- boot_get_ramdisk() and image_get_ramdisk() do not need all
- cmdtp, flag, argc and argv arguments. Simplify routines definition.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit c87796483bc7c2900470dc747c367f602577608d
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:12:37 2008 +0100
- [new uImage] Add new uImage format support for ramdisk handling
- This patch updates boot_get_ramdisk() routine adding format
- verification and handling for new (FIT) uImages.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:01:05 2008 +0100
- [new uImage] Add new uImage format support for kernel booting
- New format uImages are recognized by the bootm command,
- validity of specified kernel component image is checked and
- its data section located and used for further processing
- (uncompress, load, etc.)
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Mar 11 12:35:20 2008 +0100
- [new uImage] Add new uImage format support for imls and iminfo commands
- imls and iminfo can now recognize nad print out contents of the new (FIT)
- format uImages.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Mar 11 12:34:47 2008 +0100
- [new uImage] Add support for new uImage format to mkimage tool
- Support for the new uImage format (FIT) is added to mkimage tool.
- Commandline syntax is appropriately extended:
- mkimage [-D dtc_options] -f fit-image.its fit-image
- mkimage (together with dtc) takes fit-image.its and referenced therein
- binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
- final image that can be transferred to the target (e.g., via tftp) and then
- booted using the bootm command in U-Boot.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit eb6175edd6c120d8b89678243e5a2be362ee8e40
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Mon Mar 10 17:53:49 2008 +0100
- [new uImage] Make node unit names const in struct bootm_headers
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 21:24:06 2008 +0100
- [new uImage] New uImage low-level API
- Add FDT-based functions for handling new format component images,
- configurations, node operations, property get/set, etc.
- fit_ - routines handling global new format uImage operations
- like get/set top level property, process all nodes, etc.
- fit_image_ - routines handling component images subnodes
- fit_conf_ - routines handling configurations node
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 30f1806f60978d707b0cff2d7bf89d141fc24290
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 16:20:02 2008 +0100
- Release v1.3.2
- Update CHANGELOG for release.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Mar 9 14:52:11 2008 +0100
- SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit db695b78515ddb88a2d4f3357c120345efbf59ec
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Mar 9 10:44:01 2008 +0100
- scb9328: Fix flash warning: type qualifiers ignored on function return type
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 10:50:41 2008 +0100
- esd/common/fpga.c: fix indentation.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cc3843e36453e2b8db65d7e56de938ba045016a0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 10:33:31 2008 +0100
- common/kgdb.c: fix 'dereferencing type-punned pointer' warning
- and get rid of a couple of unneeded casts.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 10:09:53 2008 +0100
- esd/common/fpga.c: fix 'assignment of read-only location' error
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c6fe4dabac066e8758345d249032768496983a3e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 02:13:19 2008 +0100
- Makefile: make build silently again.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 76babc86576f092573599334c85ec543fdbc6015
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 02:07:49 2008 +0100
- m501sk: Fix out of tree building
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 00:06:09 2008 +0100
- ADS5121: fix out of tree build
- and simplify Makefile a bit.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Mar 8 22:35:31 2008 +0100
- Release v1.3.2
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 78a90f827df74520e939c794fc7413dace21c4db
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Mar 8 22:35:04 2008 +0100
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Mar 8 21:30:04 2008 +0100
- esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d75469d48c05795144f4b8ba76addbb4920a7bba
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sat Mar 8 09:25:49 2008 +0900
- net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
- When rtl_recv() of rtl8169 is called, OWNbit of status register
- is not enable occasionally.
- rtl_recv() doesn't work normally when the driver doesn't do
- appropriate processing.
- This patch fix this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Mar 7 08:15:28 2008 +0100
- mgsuvd: update board configuration
- initialize the UPIOx controller.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Mar 7 08:13:41 2008 +0100
- mgcoge: update board configuration
- add support for the config Flash.
- initialize the UPIOx controller.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 7 12:27:31 2008 -0600
- mpc83xx: make dtb basename file references equal those of linux
- the dts file basenames were updated in linux - this helps avoid
- inadvertently loading any old dtbs laying around.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Feb 27 16:08:22 2008 -0600
- net: uec_phy: actually increment the timeout counter
- allow u-boot to recover (and, e.g., switch to another interface) in the
- case where a PHY does not report autonegotiation is complete within its
- two second timeout value.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 772003e43957ee0c895abed7cd82cbe72820cbb8
- Author: Markus Brunner <super.firetwister@googlemail.com>
- Date: Wed Mar 5 21:38:12 2008 +0100
- fix taihu soft spi_read
- The taihu board used gpio_read_out_bit which reads the output register and not
- the pin state.
- Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
- commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Mar 7 08:01:43 2008 +0100
- ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit bd4458cb47abecabd406b1210457be96c69fc49d
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Mar 4 16:59:22 2008 +0800
- 837xEMDS: Improve the system performance
- 1. Make the CSB bus pipeline depth as 4, and enable
- the repeat mode;
- 2. Raise the eTSEC emergency priority;
- 3. Use the highest IP blocks clock.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
- Author: Detlev Zundel <dzu@denx.de>
- Date: Thu Mar 6 16:45:53 2008 +0100
- Replace "run load; run update" with conditionalized "run load update".
- The latter version stops when "run load" fails for whatever reasons
- rendering the combination *a lot* more secure.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 6bc113886d7d316df1a4e459bec8baf027518551
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 4 17:40:41 2008 +0100
- net: Print error message upon net usage when no ethernet-interface is found
- This patch fixes a problem seen on PPC4xx boards, when no MAC address is
- defined. Then no ethernet interface is available but a simple "tftp"
- command will return without any error message which is quite confusing.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a30a549a3553032d809e0356306b62de0b125901
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 4 10:03:03 2008 -0600
- Remove erroneous or extra spd.h #includers.
- Many of the spd.h #includers don't need it,
- and wanted to have spd_sdram() declared instead.
- Since they didn't get that, some also had open
- coded extern declarations of it instead or as well.
- Fix it all up by using spd_sdram.h where needed.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a4475386cef14af3fd88f0518b688e755669486d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 4 17:41:28 2008 +0100
- PCS440EP: fix build problems (redundant #define)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 4 17:39:25 2008 +0100
- net: Print error message upon net usage when no ethernet-interface is found
- This patch fixes a problem seen on PPC4xx boards, when no MAC address is
- defined. Then no ethernet interface is available but a simple "tftp"
- command will return without any error message which is quite confusing.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 4 17:38:50 2008 +0100
- W7OLMC/W7OLMG: fix build problems (redundant #define)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f9301e1cda296245ba052d7b08321199c3d0af9d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 4 14:58:31 2008 +0100
- Makefile: fix problem with out-of-tree builds introduced by 5013c09f
- Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
- problem for out-of-tree builds which caused "make clean" to fail.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit dfece9500556bed5d8244b1c15d973cec7c25bfe
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 4 11:58:26 2008 +0100
- examples/Makefile: build "hello_world" on 8xx, too.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 74eb0222594fd23aafdf168e60e872814eea8b62
- Author: Mike Nuss <mike@terascala.com>
- Date: Mon Mar 3 15:27:05 2008 -0500
- PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
- Every now and then a Sequoia board (or equivalent hardware) had
- problems connecting to a Gigabit capable network interface.
- There were differences in the PHY setup between Linux and U-Boot.
- This patch fixes the problem. Apparently "remote fault" is being set,
- which signals to some devices (on the other end of the cable) that a
- fault has occurred, while other devices ignore it. I believe the RF bit
- was causing the issue, but I removed T4 also, to match up with Linux.
- Signed-off-by: Mike Nuss <mike@terascala.com>
- commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Mar 3 09:58:52 2008 -0600
- fix QE firmware uploading limit
- Fix a typo in qe_upload_firmware() that prevented uploading firmware on
- systems with more than one RISC core.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
- Author: Bernhard Nemec <bnemec@ganssloser.com>
- Date: Mon Mar 3 11:57:23 2008 +0000
- Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
- Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
- see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
- Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
- commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
- Author: Kim B. Heino <Kim.Heino@bluegiga.com>
- Date: Mon Mar 3 10:39:13 2008 +0200
- fix copy from ram to dataflash
- If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
- routines instead of dataflash. This is because it checks "if source
- address is not dataflash" instead of target address.
- Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
- commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Mar 3 12:16:44 2008 +0100
- Fix quoting problem (preboot setting) in many board config files.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Mar 3 12:36:49 2008 +0100
- ADS5121: Fix default environment.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Mar 2 16:12:31 2008 +0100
- Makefile: Fix missing unconfig and mkconfig use
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
- Author: michael <trimarchi@gandalf.sssup.it>
- Date: Sun Mar 2 23:33:46 2008 +0100
- Fix checking fat32 cluster size.
- This fixes the cluster size tests in the FAT32 file system.
- The current implementation of VFAT support doesn't work if the
- referred cluster has an offset > 16bit representation, causing
- "fatload" and "fatls" commands etc. to fail.
- Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
- commit 661bad63a076a96c39c64f136915f146725af92b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 2 22:57:23 2008 +0100
- Prepare v1.3.2-rc2 release candidate
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 76957cb3d621bf664311908e5962e151c633c285
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 1 12:11:40 2008 +0100
- ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
- The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
- currently 4k/2k is configured. This patch fixes this issue.
- Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 118978c8eb43803e2794233922df4249fa278b83
- Author: Woodruff, Richard <r-woodruff2@ti.com>
- Date: Fri Feb 29 17:34:35 2008 -0600
- Fix alignment error on ARM for modules
- Fix alignment fault on ARM when running modules. With out an explicit
- linker file gcc4.2.1 will half word align __bss_start's value. The word
- dereference will crash hello_world.
- signed-off-by Richard Woodruff <r-woodruff2@ti.com>
- commit ce1120dd703e6f12c59e4eba9962356a0300b832
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Feb 29 17:45:31 2008 +0800
- fs: Fix ext2 read issue
- The ext2 aligned process will corrupt the key
- data struct, the patch fix this.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 2 22:45:33 2008 +0100
- Makefile: cleanup "clean" target
- Make sure CDPATH settings cannot interfere.
- Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ffda586fc1373243c9794babde69500f6293a8d8
- Author: Li Yang <leoli@freescale.com>
- Date: Fri Feb 29 11:46:05 2008 +0800
- add cscope build target
- Add cscope build target to generate cscope database for code browsing.
- Signed-off-by: Li Yang <leoli@freescale.com>
- commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Feb 27 15:06:39 2008 -0600
- net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
- erratum 5.6 states the autoneg completion bit is functional only if the
- autoneg bit is asserted.
- This fixes any secondarily-issued networking commands on non-gigabit
- links on the mpc8360 mds board.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5f91db7f582ca17b1f19f10189c025696f333d2e
- Author: John Rigby <jrigby@freescale.com>
- Date: Tue Feb 26 09:38:14 2008 -0700
- MPC5121e ADS PCI support take 3
- Adds PCI support for MPC5121
- Tested with drivers/net/rtl8139.c
- Support is conditional since PCI on old silicon does not work.
- ads5121_PCI_config turns on PCI
- In this version, condition compilation of PCI code has been moved
- from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
- suggested by Jean-Christophe PLAGNIOL-VILLARD
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit 44b4dbed4133f657705b7c5193209da9978243a7
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Mon Feb 25 23:53:07 2008 +0100
- Fix warnings while compilation of post/drivers/memory.c
- Fix warnings while compilation with new gcc in eldk-4.2
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Mon Feb 25 20:54:04 2008 +0100
- ppc4xx: Fix problem in 4xx_enet.c driver
- U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
- enabled. To reproduce the problem ensure that 'ethrotate'
- environment variable isn't set to "no" and then run
- "tftp 200000 not_existent_file".
- This patch tries to fix the issue.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Mon Feb 25 20:04:20 2008 +0100
- POST: Disable cache while SPR POST
- Currently (since commit b2e2142c) u-boot crashes on
- sequoia board while SPR test if CONFIG_4xx_DCACHE is
- enabled. This patch disables the cache while SPR test.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Feb 25 17:52:40 2008 +0100
- TQM5200: use automatic fdt memory fixup (part 2)
- Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
- TB5200 and TB5200_B to fixup the /memory node with the memory values
- detected by U-Boot.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 44ceec253ea941b301abf4b079d52324def69d92
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Feb 25 15:17:05 2008 +0100
- TQM5200: use automatic fdt memory fixup
- Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
- TB5200 and TB5200_B to fixup the /memory node with the memory values
- detected by U-Boot.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Feb 25 13:27:52 2008 +0100
- TQM5200: fix bug in SDRAM initialization code
- This patch fixes a bug in the SDRAM initialization code for the
- TQM5200. The hi_addr bit is now set correctly. Without this patch
- the hi_addr bit is always set to 1, if the second SDRAM bank is
- not populated.
- For other MPC5200 boards a correspondig patch has already been applied
- some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- --
- Forget the first patch please. I confused flash with SDRAM in
- the comment ...
- commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Feb 25 00:03:12 2008 +0100
- mx1fs2/flash: Fix multiple compiler warnings
- "pointer targets in assignment differ in signedness"
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Feb 25 00:03:11 2008 +0100
- arm-imx: Fix register definitions
- Sync register definitions with linux
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Feb 25 00:03:10 2008 +0100
- actua1/actua2/actua3: Fix multiple unused variable warnings
- - actua1:
- actux1.c: In function 'checkboard':
- actux1.c:92: warning: unused variable 'revision'
- - actua2:
- actux2.c: In function 'checkboard':
- actux2.c:100: warning: unused variable 's'
- actux2.c:99: warning: unused variable 'revision'
- actux2.c: In function 'reset_phy':
- actux2.c:130: warning: unused variable 'i'
- - actua3:
- actux3.c: In function 'checkboard':
- actux3.c:114: warning: unused variable 'revision'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sun Feb 24 11:44:29 2008 +0900
- Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
- The previous patch was lacking of i386, microblaze, nios and nios2. This
- patch tries to fix them.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 22:22:46 2008 +0100
- [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
- Do not use global fdt blob pointer, calculate blob size from routine
- argument blob pointer.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit d1cc52879c8966507dad9fb575481e6d3985e64e
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Tue Feb 12 00:58:31 2008 +1100
- libfdt: Add and use a node iteration helper function.
- This patch adds an fdt_next_node() function which can be used to
- iterate through nodes of the tree while keeping track of depth. This
- function is used to simplify the iteration code in a lot of other
- functions, and is also exported for use by library users.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 8cf30809a82902a471866d2f07725ce3b8a22291
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Feb 29 16:00:24 2008 +0100
- [new uImage] Add libfdt support to mkimage
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Feb 29 16:00:23 2008 +0100
- [new uImage] Add sha1.o object to mkimage binary build
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit df6f1b895c997978f03afe04502ee76b7ba34ab9
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 16:00:06 2008 +0100
- [new uImage] Fix component handling for legacy multi component images
- Use uint32_t when accessing size table in image_multi_count() and
- image_multi_getimg() for multi component images.
- Add missing uimage_to_cpu() endianness conversion.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 15:59:59 2008 +0100
- [new uImage] Share common uImage code between mkimage and U-boot
- This patch adds the following common routines:
- 1) Dedicated mkimage print_header() is replaced with common
- image_print_contents()
- image_print_contents_noindent()
- 2) Common os/arch/type/comp fields name <--> id translation routines
- genimg_get_os_name()
- genimg_get_arch_name()
- genimg_get_type_name()
- genimg_get_comp_name()
- genimg_get_os_id()
- genimg_get_arch_id()
- genimg_get_type_id()
- genimg_get_comp_id()
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 14:58:34 2008 +0100
- [new uImage] Update naming convention for bootm/uImage related code
- This patch introduces the following prefix convention for the
- image format handling and bootm related code:
- genimg_ - dual format shared code
- image_ - legacy uImage format specific code
- fit_ - new uImage format specific code
- boot_ - booting process related code
- Related routines are renamed and a few pieces of code are moved around and
- re-grouped.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:51 2008 -0600
- [new uImage] Respect autostart setting in linux bootm
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:50 2008 -0600
- [new uImage] Provide ability to restrict region used for boot images
- Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
- to restrict what memory range is used for bootm.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:49 2008 -0600
- [new uImage] Use lmb for bootm allocations
- Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
- functions over to using lmb for allocation of the ramdisk, command line
- and kernel bd info.
- Convert PPC specific fdt_relocate() to use lmb for allocation of the device
- tree.
- Provided a weak function that board code can call to do additional
- lmb reserves if needed.
- Also introduce the concept of bootmap_base to specify the offset in
- physical memory that the bootmap is located at. This is used for
- allocations of the cmdline, kernel bd, and device tree as they should
- be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f5614e7926863bf0225ec860d9b319741a9c4004
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:48 2008 -0600
- [new uImage] Add autostart flag to bootm_headers structure
- The autostart env variable was dropped as part of the initial new uImage
- cleanup. Add it back here so the arch specific code can decide if it
- wants to really boot or not.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:47 2008 -0600
- [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
- Introduce the LMB lib used on PPC in the kernel as a clean way to manage
- the memory spaces used by various boot images and structures. This code
- will allow us to simplify the code in bootm and its support functions.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Feb 19 22:03:47 2008 -0600
- [new uImage] ppc: Allow boards to specify effective amount of memory
- For historical reasons we limited the stack to 256M because some boards
- could only map that much via BATS. However newer boards are capable of
- mapping more memory (for example 85xx is capable of doing up to 2G).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:46 2008 -0600
- [new uImage] rework error handling so common functions don't reset
- Changed image_get_ramdisk() to just return NULL on error and have
- get_ramdisk() propogate that error to the caller. It's left to the
- caller to call do_reset() if it wants to.
- Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
- to a common location. In the future we will change get_fdt() and
- fdt_relocate() to return success/failure and not call do_reset() at all.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit d2bc095a639672def11d5d043b5688d0dbd692ec
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:45 2008 -0600
- [new uImage] ppc: Re-order ramdisk/fdt handling sequence
- Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
- however it does mean we have to go in and fixup the initrd info since
- we don't know where it will be.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 27953493ef025fb698d68c5dee39b36f01f4d530
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:44 2008 -0600
- [new uImage] ppc: Determine if we are booting an OF style
- If we are bootin OF style than we can skip setting up some things
- that are used for the old boot method.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:43 2008 -0600
- [new uImage] Don't pass kdb to ramdisk_high since we may not have one
- We don't actually need the kdb param as we are just using it to get
- bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
- boot via OF we might not actually fill out a kdb.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 16:30:47 2008 -0600
- 85xx: Don't icbi when unlocking the cache
- There is no reason to icbi when invalidating the temporary stack in
- the d-cache. Its impossible on e500 to have the i-cache contain
- any addresses in the temp stack and it can be problematic in generating
- transactions on the bus to non-valid addresses.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Feb 27 15:50:50 2008 -0600
- Fix source for ECM error IVPR
- The source vector for the ECM was being set to 2,
- but that's what the source vector for DDR was being
- set to. Change it to 1.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Feb 27 14:29:58 2008 -0600
- Invalidate INIT_RAM TLB mappings
- Commit 0db37dc... (and some others) changed the INIT_RAM TLB
- mappings to be unguarded. This collided with an existing "bug"
- where the mappings for the INIT_RAM were being kept around.
- This meant that speculative loads to those addresses were
- succeeding in the TLB, and going out to the bus, where they
- were causing an exception (there's nothing at that address). The
- Flash code was coincidentally causing such a speculative load.
- Rather than go back to mapping the INIT RAM as guarded, we fix
- it so that the entries for the INIT_RAM are invalidated. Thus
- the speculative loads will fail in the TLB, and have no effect.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 22:56:17 2008 +0100
- sbc8548: Fix Revision reading and unused variable 'path'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 495d162374c472f46454453553382ad0735dc725
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 22:56:16 2008 +0100
- sbc8548: Fix cfi flash bank declaration
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4efbe9dbb129f857f27856936112c8c02f016be6
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:02:26 2008 +0100
- [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
- Dual format image code must properly handle all three FDT passing methods:
- - raw FDT blob passed
- - FDT blob embedded in the legacy uImage
- - FDT blob embedded in the new uImage
- This patch enables proper raw FDT handling when no FIT imaeg support
- is compiled in. This is a bit tricky as we must dected FIT format even
- when FIT uImage handling is not enabled as both FIT uImages and raw FDT
- blobs use tha same low level format (libfdt).
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:02:26 2008 +0100
- [new uImage] POWERPC: Add image_get_fdt() routine
- FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
- (3) or embedded in the new uImage. For the (2) case embedding image must be
- verified before we get FDT from it. This patch factors out legacy image
- specific verification routine to the separate helper routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1efd43601f90de21ec6c0ebb9880823e822927b1
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:02:07 2008 +0100
- [new uImage] Add image_get_kernel() routine
- Legacy image specific verification is factored out to a separate helper
- routine to keep get_kernel() generic and simple.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:01:04 2008 +0100
- [new uImage] Move image verify flag to bootm_headers structure
- Do not pass image verification flag directly to related routines.
- Simplify argument passing and move it to the bootm_header structure which
- contains curently processed image specific data and is already being passed
- on the argument list.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit 823afe7cefe00dafefc6696c1cc7aa828c394234
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:00:47 2008 +0100
- [Makefile] Sort COBJS in lib_<arch> Makefiles
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:00:47 2008 +0100
- [new uImage] Optimize gen_get_image() flow control
- When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
- to do, update its control flow to better reflect that simple case.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Mon Feb 4 08:28:17 2008 +0100
- [new uImage] POWERPC: Split get_fdt() into get and relocate routines
- PPC specific FDT blob handling code is divided into two separate routines:
- get_fdt() - find and verify a FDT blob (either raw or image embedded)
- fdt_relocate() - move FDT blob to within BOOTMAP if needed
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Feb 25 13:13:37 2008 -0600
- 86xx: Fix renamed GUR symbols in sbc8641d board.
- Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
- (86xx: Fix GUR PCI config registers properly), we should have
- changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
- symbols in the sbc8641d board as well. Fix this oversight.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 64cd594e623c39f73964d18787763e4533f791f7
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Feb 25 16:50:48 2008 +0100
- ppc4xx: Fix acadia_nand build problem
- Don't include testdram() on NAND-booting target acadia_nand. This saves
- a few bytes and makes the target build clean again.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 14e099e698d41e8179d05c2b2dbcf704a236f748
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 24 23:03:12 2008 +0000
- mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 724902c8464e610642b3a170278b99710325888e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 24 23:03:11 2008 +0000
- arm-imx: Fix registers definition
- Sync registers definition with linux
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4cd288b589ea1178947c6e364453c32b3dede6b7
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 24 23:03:10 2008 +0000
- actua1/actua2/actua3: Fix multipleunused variable
- - actua1:
- actux1.c: In function 'checkboard':
- actux1.c:92: warning: unused variable 'revision'
- - actua2:
- actux2.c: In function 'checkboard':
- actux2.c:100: warning: unused variable 's'
- actux2.c:99: warning: unused variable 'revision'
- actux2.c: In function 'reset_phy':
- actux2.c:130: warning: unused variable 'i'
- - actua3:
- actux3.c: In function 'checkboard':
- actux3.c:114: warning: unused variable 'revision'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d5934ad7756f038a393a9cfab76a4fe306d9d930
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Mon Feb 4 08:28:09 2008 +0100
- [new uImage] Add dual format uImage support framework
- This patch adds framework for dual format images. Format detection is added
- and the bootm controll flow is updated to include cases for new FIT format
- uImages.
- When the legacy (image_header based) format is detected appropriate
- legacy specific handling is invoked. For the new (FIT based) format uImages
- dual boot framework has a minial support, that will only print out a
- corresponding debug messages. Implementation of the FIT specific handling will
- be added in following patches.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit b29661fc1151077776454288051bc9a488351ce8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Feb 24 15:21:36 2008 +0100
- Coding style cleanup. Prepare v1.3.2-rc2 release candidate
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 00b48a48424894daa589d166d73277830b1c6ac4
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Feb 23 12:15:56 2008 +0100
- ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b075d74efb70ff68c49a2532f26b56d6703b69c1
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Feb 23 17:24:16 2008 +0900
- Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
- ----------------------------------------------------------------
- Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
- Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
- 32bit targets.
- GCC can be made to warn about usage of long long types with ISO C90
- (-ansi), but only with -pedantic. You can write this in a way that even
- then it doesn't cause warnings, namely by:
- #ifdef __GNUC__
- __extension__ typedef __signed__ long long __s64;
- __extension__ typedef unsigned long long __u64;
- #endif
- The __extension__ keyword in front of this switches off any pedantic
- warnings for this expression.
- Signed-off-by: Olaf Hering <olh@suse.de>
- Cc: <linux-arch@vger.kernel.org>
- Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- ----------------------------------------------------------------
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 208acd112e6517b21fc30c420396902b103563ac
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Feb 23 17:07:57 2008 +0900
- cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
- This will reduce the build time.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Feb 23 17:05:00 2008 +0900
- cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
- This will reduce the build time.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Feb 23 16:58:41 2008 +0900
- cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
- This reduces the build time by ~10%. Here's the gth2_config example.
- BEFORE AFTER
- real 0m31.441s 0m27.833s
- user 0m24.766s 0m23.045s
- sys 0m10.425s 0m7.468s
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
- Author: Marcel Moolenaar <marcelm@juniper.net>
- Date: Fri Feb 22 10:48:07 2008 -0800
- make define2mk.sed work on FreeBSD
- In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
- the define2mk.sed script was identified as the source of the link
- failure on FreeBSD. The problem is that sed(1) does not always support
- the '+' operator. It isn't on FreeBSD. The attach patch implements the
- equivalent, using the '*' operator instead and should work everywhere.
- Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
- commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Feb 22 17:21:32 2008 +0100
- Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
- The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
- final traces of long-deprecated "ramdisk" kernel parm") makes these
- changes neccessary.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
- Author: Larry Johnson <lrj@acm.org>
- Date: Thu Feb 21 13:58:16 2008 -0500
- LM75 bug fix for negative temperatures
- When the LM75 temperature sensor measures a temperature below 0 C, the
- current driver does not perform sign extension, so the result returned is
- 256 C too high. This patch fixes the problem.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 5a910c224b13e413bda41922379add6d75c32da3
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Feb 21 18:33:45 2008 +0100
- IDS8247: update MAINTAINER entry.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Feb 21 18:31:15 2008 +0100
- Fix device tree for mgsuvd board.
- Rename the "scc" node in "ethernet" for the mgsuvd board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Feb 21 14:23:42 2008 +0100
- lwmon5: enable hardware watchdog
- Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
- causing it to reboot the board if U-Boot does a long busy-wait with
- udelay(). Thus, for these boards we have to restart WD more
- frequently.
- This patch splits the busy-wait udelay() into smaller, predefined,
- intervals, so that the watchdog timer may be resetted with the
- configurable (CONFIG_WD_PERIOD) interval.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Feb 21 12:52:29 2008 +0100
- ppc4xx: Support for ATI Radeon 9200 card on sequoia
- Adds configuration option for ATI Radeon 9200 card
- support to sequoia config file. If CONFIG_VIDEO
- is enabled, TEXT_BASE should be changed to 0xFFF80000.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Feb 18 08:18:07 2008 -0600
- Remove duplicate defines for ARRAY_SIZE
- A few duplicate of the ARRAY_SIZE macro sneaked in since we put
- the define in common.h.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Feb 18 08:09:37 2008 -0600
- ppc: Allow boards to specify effective amount of memory
- For historical reasons we limited the stack to 256M because some boards
- could only map that much via BATS. However newer boards are capable of
- mapping more memory (for example 85xx is capable of doing up to 2G).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:24:13 2008 -0500
- include autoconf.mk before any other .mk files
- This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
- those .mk files can have make if statements based on the current config.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:10:07 2008 -0500
- error check autoconf.mk generation
- If any of the steps for generating autoconf.mk fail currently, they go
- unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
- This is simpler and more robust than placing '|| exit $$?' after every line.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 019895a8dee71a9f00da05c03e379f45d581b0fe
- Author: Stefano Babic <sbabic@denx.de>
- Date: Mon Feb 18 08:03:51 2008 +0100
- Fix bug in dependency checking
- By adding VERSION_FILE to the PHONY targets the script
- /tools/setlocalversion is always called and version_autogenerated.h
- is replaced only if the script find a modified source file.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 98ba144ccc912eee90dd42699f023c497ce774c6
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Feb 18 14:35:43 2008 +0900
- Fix GPMC CS2 memory setup at apollon
- It disables the current map first
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 23:52:46 2008 +0100
- uli526x: Fix multiple differ in signedness and parentheses around comparison
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 16:58:04 2008 +0100
- MIPS: Fix CFG_NO_FLASH support
- - Fix flash_init call when CFG_NO_FLASH is used
- - Remove no more needed flash.c for qemu-mips
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sat Feb 16 02:40:18 2008 -0500
- easylogo: clean up some more and add -r (rgb) support
- Michael Hennerich added support for outputting an image in RGB format rather
- than forcing YUYV all the time. This makes obvious sense if the display you
- have takes RGB input rather than YUYV.
- Rather than hack in support for options, I've converted it to use getopt and
- cleaned up the argument parsing in the process.
- Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit f65c98129ccada3f7caf97d80395a95b84e911de
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sat Feb 16 02:12:37 2008 -0500
- Makefile: add target for $(LDSCRIPT)
- If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
- then change into the board directory and try and create it. This allows you
- to generate the linker script on the fly based upon board defines (like the
- Blackfin boards do).
- There should be no regressions due to this change as the normal case is to
- already have a u-boot.lds file. If that's the case, then there's nothing to
- generate, and so make will always exit. The fix here is that if the linker
- script does not exist, the implicit rules take over and attempt to guess how
- to generate the file.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 5583cbf736474ef754e128a54fb78632f57b48fd
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:27:49 2008 +0100
- [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 2242f5369822bc7780db95c47985bb408ea9157b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:27:41 2008 +0100
- [new uImage] Rename and move print_image_hdr() routine
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:20:20 2008 +0100
- [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
- Introducing routines for parsing new uImage format bootm arguments:
- [<addr>]#<conf> - configuration specification
- [<addr>]:<subimg> - subimage specification
- New format images can contain multiple subimages of the same type. For example
- a single new format image file can contain three kernels, two ramdisks and a
- couple of FDT blobs. Subimage and configuration specifications are extensions
- to bootm (and other image-related commands) arguments' syntax that allow to
- specify which particular subimage should be operated on.
- Subimage specification is used to denote a particular subimage. Configurations
- are a bit more complex -- they are used to define a particualr booting setup,
- for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
- etc.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:20:19 2008 +0100
- [new uImage] Add gen_get_image() routine
- This routine assures that image (whether legacy or FIT) is not
- in a special dataflash storage.
- If image address is a dataflash address image is moved to system RAM.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:20:18 2008 +0100
- [new uImage] Pull in libfdt if CONFIG_FIT is enabled
- New uImage format (Flattened Image Tree) requires libfdt
- functionality, print out error message if CONFIG_OF_LIBFDT
- is not defined.
- New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
- This commit turns it on by default.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Mon Feb 18 23:16:35 2008 +0100
- CFI: Do not use uninitialized cmd_reset
- Do not use uninitialized cmd_reset; issue both AMD and Intel reset
- commands instead
- From a short test, it looks like AMD-style flash roms treat *any* unknown
- command write as a reset, at least when in CFI Query mode, so issuing the
- Intel reset command to AMD-style flashs seems safe (from the small sample I
- have), plus the 3-cycle magic sequence should kick the state machine into
- the right state even without a reset command. Since the AMD-style flashs
- require the unlock sequence for real operation, I chose to try the AMD reset
- command first, so that Intel flashs do no see an invalid command prior to
- the CFI query.
- I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
- plus Intel StrataFlash.
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Thu Feb 21 11:56:44 2008 +0100
- API: Add (c) and licensing notice to the public API header.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Feb 21 11:06:07 2008 +0100
- Fix CPU POST test failure
- The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
- ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
- by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
- This patch just saves the CR value before running the test code, so allowing
- it to do anything it wants with CR.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Acked-by: Yuri Tikhonov <yur@emcraft.com>
- --
- commit d5908b093955415f3d340706378b991f911af671
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Feb 20 15:26:51 2008 -0600
- 8610HPCD: Document the flashbank selection switches.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a551cee99ad1d1da20fd23ad265de47448852f56
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Feb 20 14:22:26 2008 -0600
- 86xx: Fix GUR PCI config registers properly.
- Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
- I tried to "8610HPCD: Fix typos in two PCI setup registers", I
- botched it due to not realizing that 8610 and 8641 had different
- Global Utility Register defintions, one of which was like 85xx,
- and the other wasn't. Correct this problem by introducing two
- symbols, one for each 86xx SoC, but neither of which is named
- anything like 85xx.
- My bad. Lovely Wednesday with git bisect. You know.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cb06eb961bdffc8728b38c242473d802e83ab2b4
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Feb 20 12:24:11 2008 -0600
- 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
- Without an actual supported video card hooked up, enabling
- the CONFIG_VIDEO by default just makes it look broken by
- routing all console output to the video card. Don't.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4d264eff4312f230776b913edade7ceb75f1b1e0
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jan 30 15:08:15 2008 -0600
- ColdFire: Fix missing code flash size for M5485EVB
- Signed-off-by: James Mahan <kmahan@freescale.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jan 30 15:04:42 2008 -0600
- ColdFire: Fix 5282 and 5271 interrupt mask bit
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Feb 19 12:31:08 2008 -0600
- 8610HPCD: Fix typos in two PCI setup registers.
- The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
- were erroneously present as 85xx names and values, leftover from
- the clone wars. Fix this by removing the 85xx cruft from the
- 86xx codebase.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Feb 18 14:01:56 2008 -0600
- 86xx: Convert sbc8641d to use libfdt.
- This is the proper fix for a missing closing brace in the function
- ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
- The ft_cpu_setup() function in mpc8641hpcn.c should have been
- removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
- but was missed. Only, the sbc8641d was nominally still using it.
- It all got ripped out, and the funcality that was in ft_board_setup()
- was refactored to remove the CPU portions into the new file
- cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
- Based loosely on an original patch from joe.hamman@embeddedspecialties.com
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 04efddc87c50c84f85dad5c331c634a6ce830a83
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 23:35:31 2008 +0100
- mpc86xx: Fix unused variable 'config' and 'immap'
- and remove useless CONFIG_DDR_INTERLEAVE
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 23:03:36 2008 +0100
- mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b6f29c84c208a091f95a10cbc9852d729659ba20
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 14:15:31 2008 +0100
- s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 14:15:32 2008 +0100
- pxa: fix assignment from incompatible pointer type
- fix mmc_bread function prototype
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 64d792063fff90b8118179b092feee09fe5cae13
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 14:15:30 2008 +0100
- at91cap9adk: fix implicit declaration of function 'eth_init'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Feb 17 15:43:44 2008 +0100
- Remove files added by mistake, update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
- Author: Mike Nuss <mike@terascala.com>
- Date: Wed Feb 6 11:10:11 2008 -0500
- PPC440EPx: Optionally enable second I2C bus
- The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
- PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
- code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
- Signed-off-by: Mike Nuss <mike@terascala.com>
- Cc: Stefan Roese <sr@denx.de>
- commit ef5b4f221c22d05770878513951745f236b5b43f
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Tue Feb 5 10:26:44 2008 +0100
- ppc4xx: HCU4/5. Cleanup configs
- - hcu4.h: Removed define of CONFIG_PPC405GPr
- - Corrected phy addresses
- - Fix boot variables
- - Respect line length of 80 chars
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 74973126d1be63ac75bdc192f46234dca3a7c421
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Tue Feb 5 11:31:28 2008 +0100
- ppc4xx: HCU4/5. Cleanups
- - Fix some coding style violations.
- - Use in/out_u16/32 where appropriate.
- - Use register names from ppc405.h.
- - Fix trace useage for Lauterbach.
- - Remove obsolete generation HCU2.
- - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Tue Feb 5 10:26:41 2008 +0100
- ppc4xx: PPC405GPr fix missing register definitions
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 214398d9cb22268d9d4f7563359edca0f78297a2
- Author: Larry Johnson <lrj@acm.org>
- Date: Fri Jan 18 21:49:05 2008 -0500
- ppc4xx: Beautify configuration files for Sequoia and Korat boards
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 30c6a241e88499f536e86d325759e29ba00ff67f
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Feb 15 20:09:01 2008 +0100
- Wipe out assembler warnings while compiling x86 biosemu
- This patch tries to get rid of some assembler warnings about
- changed .got2 section type while compiling x86 bios emulator
- code.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Feb 15 00:57:09 2008 +0100
- Prepare v1.3.2-rc1 release candidate
- commit f33e9653c9c09868995d788511d573771c209fe5
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Feb 15 00:13:20 2008 +0100
- Fix compile warning on lib_ppc/board.c
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Feb 14 18:22:04 2008 +0100
- Add Radeon Mobility 9200 pci device id to the radeon driver
- This patch extends PCI device id table of the
- radeon driver so that the driver will also support
- Radeon Mobility 9200 (M9+) based boards.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 1b8607e1f7143548c6062c28371449ec69588c00
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Feb 14 18:19:50 2008 +0100
- Extend ATI Radeon driver to support more video modes
- Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
- 800x600, 640x480 at 24, 16 and 8 bpp.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 4124382de029d361162a4b8cecc773eb8f26e2a8
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 10 17:05:20 2008 +0100
- xsengine: fix typo and few coding style
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Fri Feb 8 21:25:58 2008 +0100
- Fix wrong memory limit calculation in memory-test
- If the length of the memory address range passed to the "mtest" command is
- not of the form 2^x - 1, not all address lines are tested. This bug is
- inherited from the original software at
- http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
- this.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Feb 15 00:11:39 2008 +0100
- Coding STyle cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f6921e3dc331293c873ec4d109fd5517a42a90b3
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Feb 5 13:30:43 2008 +0900
- sh: Fix register address of SH7722
- The address of SH7722 is wrong by old document.
- This patch fixes this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 17:44:23 2008 -0500
- only update version header as needed
- Constantly rebuilding the version header will force useless relinking, so we
- simply need to compare the new header with the existing one before updating
- it.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 208447f8e953f347425eb92c8e28d59e6d911363
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Jan 28 05:56:19 2008 -0500
- Do not specify a CROSS_COMPILE default when executing size
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Wed Feb 13 11:19:19 2008 +0100
- Fix return value of mtest when CFG_ALT_MEMTEST set
- Fix a missing return statement from a non-void function.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 9 14:35:26 2008 -0600
- 85xx, 86xx: Determine I2C clock frequencies and store in global_data
- Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
- Update the get_clocks() function in 85xx and 86xx to determine the I2C
- clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Feb 14 23:18:01 2008 +0100
- TQM834x: clean up configuration
- Get board name consistent with Linux and elsewhere;
- get rid of local network definitions etc.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 38cc09c55b1d7f233789052c6fc462e5377669a9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Feb 14 08:02:12 2008 +0100
- TFTP: fix search of ':' in BootFile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0bc9efada170096c6b273f19165e32936d330d80
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Feb 14 22:46:55 2008 +0100
- Coding style cleanup; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Feb 14 22:43:22 2008 +0100
- PPC: Use r2 instead of r29 as global data pointer
- R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
- will refuse to use load/store multiple insns; instead, it issues a
- list of simple load/store instructions upon function entry and exit,
- resulting in bigger code size, which in turn makes the build for a
- few boards fail.
- Use r2 instead.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3c234efa693bc59906c2be55c7918ecbb55392ea
- Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
- Date: Wed Jan 30 09:08:49 2008 +0100
- ARM: make the machid configurable via the environment
- If the variable "machid" exists, let do_bootm_linux use that instead
- of bd->bi_arch_number.
- Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
- commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Wed Jan 23 16:34:46 2008 +0200
- Use #ifdef CONFIG_FSLDMAFEC
- MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
- fails
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit 26c7bab81e08dc7bd696c48f753428a829629bd8
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Jan 19 10:25:59 2008 +0900
- common/miiphyutil.c: Cleanup MII_DEBUG and debug()
- Current MII_DEBUG is confusing in two ways. One is useless define-then-
- undef at the top of the file. The other is there is only one debug() in
- this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
- While there are many useful printf()/puts() debug codes, but they are for
- DEBUG, not for MII_DEBUG.
- This patch tries to put them all together into MII_DEBUG and debug().
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 751b9b5189f3274b03c809172631316d6b002c82
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Thu Jan 17 16:43:25 2008 +0900
- OneNAND Initial Program Loader (IPL) support
- This patch enables the OneNAND boot within U-Boot.
- Before this work, we used another OneNAND IPL called X-Loader based
- on open source. With this work, we can build the oneboot.bin image
- without other program.
- The build sequence is simple.
- First, it compiles the u-boot.bin
- Second, it compiles OneNAND IPL
- Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
- The mechanism is similar with NAND boot except it boots from itself.
- Another thing is that you can only use the OneNAND IPL only to work
- other bootloader such as RedBoot and so on.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 21f6f9636f0e978397548751347425fbf8d42bb3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Jan 16 13:06:59 2008 -0600
- Fix CONFIG_MMC usage in fat code
- A #if statement in fat.c depended on CONFIG_MMC, instead of
- defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
- as "1" rather than just defined. Now it's better.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Tue Jan 15 12:52:31 2008 +0100
- ppc: Refactor cache routines, so there is only one common set.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jan 23 15:55:02 2008 -0600
- 86xx: Fix compilation warning in sys_eprom.c
- sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 65230107025733e89e28fd5e5cfd916d4953c28a
- Author: Haavard Skinnemoen <hskinnemoen at>
- Date: Fri Feb 22 11:40:50 2008 +0000
- Move AT91RM9200DK board support under board/atmel
- We already have a vendor subdir for Atmel, so we should use it.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
- commit 6d0943a6be99977d6d853d51749e9963d68eb192
- Author: Andreas Engel <andreas.engel@ericsson.com>
- Date: Mon Jan 14 09:06:52 2008 +0000
- ARM: cleanup duplicated exception handlingcode
- Move duplicated exception handling code into lib_arm.
- Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
- commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
- Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
- Date: Fri Feb 1 10:09:03 2008 +0000
- Support for Artila M-501 starter kit
- Kimmo Leppala / Sysart and
- Timo Tuunainen / Sysart
- commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
- Author: Stelian Pop <stelian@popies.net>
- Date: Mon Feb 11 10:50:19 2008 +0000
- AT91CAP9 support
- ---------------------------------
- read_dataflash() takes a signed char pointer as a parameter. Silence a
- few warnings dues to incorrect parameter types in env_dataflash.c.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu Feb 7 09:42:57 2008 +0000
- AT91CAP9 support : move board files to Atmel vendor directory.
- AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 7263ef191b87da94768f762c7093bedeb70db98f
- Author: Stelian Pop <stelian at>
- Date: Thu Jan 3 21:15:56 2008 +0000
- AT91CAP9 support : MACB changes
- Signed-off-by: Stelian Pop <stelian <at> popies.net>
- Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
- commit 6afcabf11d7321850f4feaadfee841488ace54c5
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu Feb 7 16:37:54 2008 +0000
- AT91CAP9 support : board/ files
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
- Author: Stelian Pop <stelian at>
- Date: Wed Jan 30 21:15:54 2008 +0000
- AT91CAP9 support : cpu/ files
- Signed-off-by: Stelian Pop <stelian <at> popies.net>
- commit fa506a926cec348805143576c941f8e61b333cc0
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu Jan 31 21:15:53 2008 +0000
- AT91CAP9 support : include/ files
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 20b197c6f2799af399a68f96a1aff543a75621b8
- Author: Stelian Pop <stelian@popies.net>
- Date: Sun Jan 20 19:49:21 2008 +0000
- AT91CAP9 support : build integration
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
- Author: Stelian Pop <stelian@popies.net>
- Date: Sun Jan 20 21:07:00 2008 +0000
- Improve DataFlash CS definition.
- Use a structure instead of the error prone unnamed array to
- define the possible dataflash banks.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit a6cdd21b56014208706238712a853a9e9a0a2290
- Author: Stelian Pop <stelian@popies.net>
- Date: Sat Jan 19 21:09:35 2008 +0000
- Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
- Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
- cpu/arm926ejs/start.o: In function `cpu_init_crit':
- .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri Feb 1 16:50:24 2008 +0000
- Fix timer overflow in DaVinci
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri Feb 1 16:49:08 2008 +0000
- Update board NetStar
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- commit b7f6193e76651e1fd606e46eb11915b53cb6618b
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Tue Feb 5 10:26:42 2008 +0100
- ppc4xx: HCU4/5. Fix make O=../xx
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
- Author: Larry Johnson <lrj@acm.org>
- Date: Tue Jan 22 08:51:59 2008 -0500
- ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit fe891ecf4d187e9d11dde869ed4623af52b54451
- Author: Hiroshi Ito <ito@mlb.co.jp>
- Date: Thu Jan 31 18:35:04 2008 +0900
- NFS Timeout with large files.
- Retry to send NFS packet before reaching timeout.
- Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
- commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
- Author: Johannes Stezenbach <js@sig21.net>
- Date: Tue Jan 29 00:11:25 2008 +0100
- Add dependencies to avoid race conditions with parallel make.
- Signed-off-by: Johannes Stezenbach <js@sig21.net>
- commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Jan 28 05:46:01 2008 -0500
- Mark board_init_[fr] as noreturn
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 161b2af4d7b48fd602ce333c355a4df0337892bb
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Jan 28 05:28:50 2008 -0500
- Only use TEXT_BASE if defined by the board
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 1b769881750030f10743808b9d6013e11f559350
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Jan 25 07:54:47 2008 +0100
- Fix remaining CONFIG_COMMANDS
- update comments
- Fix coding style
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Jan 21 16:46:00 2008 +0100
- Add *~ to .gitignore
- One should never add a backup file ending in with ~ to the git repository.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 00:02:10 2008 -0600
- Remove duplicate defines for ARRAY_SIZE
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c77ce474b1c57b13e9d36d9830f147966c143694
- Author: Stelian Pop <stelian@popies.net>
- Date: Mon Jan 14 22:08:14 2008 +0100
- Fix incorrect address test in AT91F_DataflashSelect().
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 13 15:09:58 2008 -0600
- Fix building of fdt_support.c if DEBUG set
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Feb 12 14:53:28 2008 -0600
- Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
- These replace direct structure references for IMMR sections.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c62776be8dca4097ca03d4f9415f08d4887b45d0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Feb 12 00:45:06 2008 +0100
- Get rid of "#undef DEBUG" from board config files.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Jan 15 17:09:41 2008 -0600
- Remove #undef DEBUG from MPC83xx board header files
- Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
- The inclusion of this line makes it impossible to enable debug code in
- other source files, because "#define DEBUG" typically needs to be defined
- before any header files are included.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 69018ce2e086e9caf35b914d675b82bc4888f077
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 08:25:45 2008 -0600
- QE: Move FDT support into a common file
- Move the flat device tree setup for QE related devices into
- a common file shared between 83xx & 85xx platforms that have QE's.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5cf746c303710329f8040d9c62ee354313e3e91f
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:59:09 2008 +0100
- [new uImage] Move kernel data find code to get_kernel() routine
- Verification of the kernel image (in old format) and finding kernel
- data is moved to a dedicated routine. The routine will also hold
- support for, to be added, new image format.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 7b325454fd231d4273de3fe373850f777fb086bf
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:58:20 2008 +0100
- [new uImage] Cleanup FDT handling in PPC do_boot_linux()
- Move FDT blob finding and relocation to a dedicated
- get_fdt() routine. It increases code readability and
- will make adding support for new uImage format easier.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:58:13 2008 +0100
- [new uImage] Cleanup do_botm_linux() boot allocations
- This patch moves common pre-boot allocation steps shared between PPC
- and M68K to a helper routines:
- common:
- - get_boot_sp_limit()
- - get_boot_cmline()
- - get_boot_kbd()
- platform:
- - set_clocks_in_mhz()
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:57:17 2008 +0100
- [new uImage] Move ramdisk loading to a common routine
- Ramdisk loading code, including initrd_high variable handling,
- was duplicated for PPC and M68K platforms. This patch creates
- common helper routine that is being called from both platform
- do_bootm_linux() routines.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:55:53 2008 +0100
- [new uImage] Removed dead ramdisk code on microblaze architectures
- Microblaze do_bootm_linux() includes ramdisk processing code but
- the ramdisk does not get used anywhere later on.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 5ad03eb3854c162684222a718b44c0716ea0db03
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:55:39 2008 +0100
- [new uImage] Factor out common image_get_ramdisk() routine
- Architecture specific do_bootm_linux() routines share common
- ramdisk image processing code. Move this code to a common
- helper routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:08 2008 +0100
- [new uImage] Move FDT error printing to common fdt_error() routine
- FDT error handling in PPC do_bootm_linux() shares the same message format.
- This patch moves error message printing to a helper fdt_error() routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 42b73e8ee00d48004791dea64b8093fb974c57e1
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:07 2008 +0100
- [new uImage] Factor out common routines for getting os/arch/type/comp names
- Move numeric-id to name translation for image os/arch/type/comp header
- fields to a helper routines: image_get_os_name(), image_get_arch_name(),
- image_get_type_name(), image_get_comp_name().
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit e99c26694a384221d336f6448c06a57479c0baa4
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:07 2008 +0100
- [new uImage] Remove standalone applications handling from boootm
- Standalone applications are supposed to be run using the "go" command.
- This patch removes standalone images handling from the do_bootm().
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:07 2008 +0100
- [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
- Support for OF_FLAT_TREE is to be obsoleted in the near future,
- remove related code from the bootm routines.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 82850f3d32a2661868ec6876bed7a22c55cef718
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:06 2008 +0100
- [new uImage] Use image API in SH do_bootm_linux() routine
- Introduce image handling API for lately added Hitachi SH architecture.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 4a995edec1ac163d9326d143ffe2b47e7543407f
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:06 2008 +0100
- [new uImage] Rename architecture specific bootm code files
- Implementation of the do_bootm_linux() and other bootm helper routines is
- architecture specific code. As such it resides in lib_<arch> directories
- in files named <arch>_linux.c
- This patch renames those files to a more clear and accurate
- lib_<arch>/bootm.c form.
- List of the renamed files:
- lib_arm/armlinux.c -> lib_arm/bootm.c
- lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
- lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
- lib_i386/i386_linux.c -> lib_i386/bootm.c
- lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
- lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
- lib_mips/mips_linux.c -> lib_mips/bootm.c
- lib_nios/nios_linux.c -> lib_nios/bootm.c
- lib_nios2/nios_linux.c -> lib_nios2/bootm.c
- lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
- lib_sh/sh_linux.c -> lib_sh/bootm.c
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 7582438c285bf0cef82909d0f232de64ec567a8a
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:06 2008 +0100
- [new uImage] Return error on image move/uncompress overwrites
- Check for overwrites during image move/uncompress, return with error
- when the original image gets corrupted. Report clear message to the user
- and prevent further troubles when pointer to the corrupted images is passed
- to do_bootm_linux routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit f13e7b2e993c61fed1f607962501e051940d6e80
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:12:17 2008 +0100
- [new uImage] Cleanup image header pointer use in bootm code
- - use single image header pointer instead of a set of auxilliary variables.
- - add multi component image helper routines: get component size/data address
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:17:10 2008 +0100
- [new uImage] Cleanup cmd_bootm.c
- - sort and cleanup headers, declarations, etc.
- - group related routines
- - cleanup indentation, white spaces
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit af13cdbc01eaf88880978bfb4f603e012818ba24
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:45 2008 +0100
- [new uImage] Add memmove_wd() common routine
- Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:44 2008 +0100
- [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 15158971f49255ccef54f0979a942cfd3de2ae52
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:44 2008 +0100
- [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
- Use image header copy instead of a (possibly corrupted) pointer to
- a initial image location.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:44 2008 +0100
- [new uImage] Remove I386 uImage fake_header() routine
- I386 targets are not using a uImage format, instead fake header
- is added to ram image before it is further processed by bootm.
- Remove this fixup and force proper uImage use for I386.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 559316faf7eae0614c91d77f509b57d6c4c091ba
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:44 2008 +0100
- [new uImage] Move CHUNKSZ definition to image.h
- CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
- move this definition to a common header.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:43 2008 +0100
- [new uImage] Move gunzip() common code to common/gunzip.c
- Move gunzip(), zalloc() and zfree() to a separate file.
- Share zalloc() and zfree() with cramfs uncompress routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit d45d5a18b6b36688f2365623f9d550566c664b5b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:43 2008 +0100
- [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
- Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
- readable in PPC variant of do_bootm_linux() routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:43 2008 +0100
- [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
- PPC implementation of do_bootm_linux() routine is moved to
- a dedicated file lib_ppc/ppc_linux.c
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:14:09 2008 +0100
- [new uImage] Define a API for image handling operations
- - Add inline helper macros for basic header processing
- - Move common non inline code common/image.c
- - Replace direct header access with the API routines
- - Rename IH_CPU_* to IH_ARCH_*
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit ed29bc4e8142b46b626f67524207b36e43d9aad6
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:19:58 2008 +0100
- Add missing cmd_ximg.o to common/Makefile
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Mon Jan 28 10:15:02 2008 +0100
- ADS5121e: DDR2 init/timing update.
- Signed-off-by: John Rigby <jrigby@freescale.com>
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit ac9152830d7fdebace8a260b7737ef2870c21ca0
- Author: John Rigby <jrigby@freescale.com>
- Date: Wed Jan 30 13:36:57 2008 -0700
- Device tree updates
- Changes to match 5121 device tree going mainline in 2.6.25.
- Change OF_SOC from "soc5121" to plain "soc".
- Remove unneeded "ref-frequency" fixups.
- Remove "address" enetaddr fixup.
- Add bus-frequency fixup for old OF_SOC so old
- kernels with old device trees will work with new
- u-boot with 66MHz IPS clock
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit de55d18df3ff2ea614624e74793de7c43520e0e7
- Author: John Rigby <jrigby@freescale.com>
- Date: Wed Jan 30 13:36:56 2008 -0700
- Change IPS freq to 66MHz
- Recommended frequency is 66MHz
- Change divider from 4 to 3.
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jan 14 22:38:55 2008 +0100
- xsengine: rename board_post_init to board_late_init
- missing migration from "Cleanup of some init functions"
- in c837dcb1a316745092567bfe4fb266d0941884ff
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8dafa87476b0d7170e219c2f5e3842c833a91807
- Author: Larry Johnson <lrj@acm.org>
- Date: Sat Jan 12 23:35:33 2008 -0500
- Add attribute POST_PREREL to ECC memory POST
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 08:25:45 2008 -0600
- QE: Move FDT support into a common file
- Move the flat device tree setup for QE related devices into
- a common file shared between 83xx & 85xx platforms that have QE's.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d38da537943cd36356b9d3d9d9b60533554b81d8
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Jan 23 17:20:14 2008 +0100
- AVR32: Make SDRAM refresh rate configurable
- The existing code assumes the SDRAM row refresh period should always
- be 15.6 us. This is not always true, and indeed on the ATNGW100, the
- refresh rate should really be 7.81 us.
- Add a refresh_period member to struct sdram_info and initialize it
- properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
- panic() until the refresh_period member is updated properly.
- Big thanks to Gerhard Berghofer for pointing out this issue.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 61151cccb660cdb06a07fb283de6089913d7bde0
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Apr 19 10:10:11 2007 +0200
- ATSTK1000: Fix potential flash programming bug
- The (now obsolete) atngw100 flash programming code was having problems
- programming the onboard at49bv642 chip. The atstk1000 flash
- programming code may have the same bug, so import fix for this problem
- from the AVR32 Linux BSP.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 22 17:04:13 2007 +0100
- ATSTK1004: Fix comment about default load address
- The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
- wouldn't have worked anyway since the board can only access 4MB of
- SDRAM.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 8269ab53608d8db2aa06969c337ab0b0518211e5
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 22 17:01:24 2007 +0100
- ATSTK1002: Use SDRAM + 4MB as default load address
- Many people run into problems when they compile a big kernel and load
- the uImage at the default SDRAM + 2MB address as the kernel will
- overwrite the uImage as it is being unpacked. Increase the default
- load address so that we can load a 4MB kernel image without any
- problems.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 2bcacc2d841b77f3d2d3910db722003742727e9f
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 22 16:51:39 2007 +0100
- ATNGW100: Fix default mtest range
- Let mtest cover the whole SDRAM except the last megabyte, which is
- where u-boot lives.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jan 22 15:31:56 2008 +0900
- sh: Fix register address of SH7722.
- The address of SH7722 is wrong by old document.
- This patch fixes this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- new command for displaying strings at specified memory locations
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- rewrite/cleanup Blackfin RTC driver
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- generate u-boot.ldr for Blackfin targets
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit b779f7a59530436040f157f7841db7ab796542df
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- scrub unused symbols
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit cc2977acc3bbbb7850f16645dd1081f95335868d
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- move Blackfin cpu object list to respective cpu directories
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- interface to Blackfin on-chip One-Time-Programmable memory
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:56 2008 -0500
- add support for memory commands with Blackfin L1 instruction memory
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:56 2008 -0500
- use C code rather than inline assembly
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:56 2008 -0500
- add Blackfin-specific reginfo command
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 0858b835e7ea501ea084d34cef75932f098342bb
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- add support for Blackfin symbol prefixes to examples
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 8dc48d71a4be753ea9f84956cd33600de35fad04
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- add Blackfin-specific bdinfo command
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- unify the Blackfin board targets
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d4d7730853e5d675f76ec666807da3028c91d592
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- punt Blackfin VDSP headers and import sanitized/auto-generated ones
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- always pull in asm/blackfin.h for Blackfin ports
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- add missing __raw versions of Blackfin read/write io functions
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- add the default Blackfin logo used by Blackfin boards with splash screens
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- add some more Blackfin docs
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 4087bc88cebec75c432a7fe9f6afb545b0919831
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit b45264ee85cbd92020640a32e02fb434fd557108
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:53 2008 -0500
- add gitignores for Blackfin pieces
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Jan 18 01:14:03 2008 +0100
- TFTP: add host ip addr support
- allow to use a different server as set in serverip
- add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
- if not defined the max length will be at 128
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e56b4b494cd92def577969f9678395aa22d34c9f
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 9 14:35:26 2008 -0600
- 85xx,86xx: Determine I2C clock frequencies and store in global_data
- Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
- Update the get_clocks() function in 85xx and 86xx to determine the I2C
- clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Dec 27 10:56:54 2007 +0100
- OMAP5912: fix FIFO handling in UART driver
- According to the OMAP5912 Serial Interfaces Reference Guide (see
- http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
- FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
- changed when the baud clock is not running, i. e. when both DLL and
- DLH are set to 0.
- Thus make sure that DLL and DLH are 0 when writing the FCR.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 15:10:52 2007 +0100
- ARM: S3C24x0 SoC NAND controller support
- This patch adds NAND support to the S3C24x0 SoC code in u-boot
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:24:40 2007 +0100
- ARM: s3c24xx: Multiple serial port support
- This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit a25f72f1f73a11de68251fb88c89991e202e68fa
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:16:57 2007 +0100
- ARM: arm920t: Allow use of 'gd' pointer from IRQ
- This patch allows us to use the 'gd' pointer (and thus environment
- and everything else associated with it) from interrupt context on
- arm920t.
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit be19bd5cd0f454b63298844a0b5377e029b2caad
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:19:38 2007 +0100
- ARM: arm920/s3c24xx: IRQ demulitplexer callback
- This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
- plus a stub implementation of it for the S3C2410.
- The purpose is to allow arm920t implementations such as the s3c24x0 to
- implement interrupt handlers in u-boot without having to touch core
- arm920t code.
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
- Author: Hebbar <gururajakr@sanyo.co.in>
- Date: Tue Dec 18 16:03:07 2007 -0800
- ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
- Add ifdef to bdinfo command to display ethernet information
- only if CONFIG_CMD_NET is defined for arm modules.
- Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
- Author: Hebbar <gururajakr@sanyo.co.in>
- Date: Tue Dec 18 16:00:54 2007 -0800
- ARM: add I2C init function call in lib_arm/board.c
- Adds I2C init func call to init sequence for ARM boards. This is
- present in ppc,blackfin and other processor init sequence.
- Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Feb 1 09:38:29 2008 +0100
- ppc4xx: Fix ndfc HW ECC byte order
- The current ndfc HW ECC implementation swaps the first two ECC bytes.
- But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
- so this swapping in the HW ECC driver is bogus. This patch fixes this
- problem and now really uses the SMC ECC byte order.
- Thanks to Sean MacLennan for pointing this out.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 30 15:35:50 2008 +0100
- ppc4xx: Fix GPIO configuration for pcs440ep
- The SRD0_PFC0 register was not configured correctly to enable the GPIO's
- 49-63 for GPIO. They have been configured as trace signals. This patch
- fixes this by clearing the corresponding bit.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 30 14:48:28 2008 +0100
- ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Fri Dec 7 00:42:32 2007 +0100
- ARM: Board voiceblue update
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Thu Dec 6 23:24:57 2007 +0100
- ARM: AT91RM9200 based boards config cleanup
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
- indentation.
- commit 481f28b1db5cd21deb55f69399ba240e107af4c7
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Thu Dec 6 22:59:16 2007 +0100
- ARM: Fix at91rm9200dk base address
- Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
- renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
- with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
- However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
- CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
- I'm sending this patch 4th (!) time in hope it produces at least some
- reaction.
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Fix at91rm9200dk base and environment address.
- commit c95219fae2a7add7daa2f91aedca65b1698465c7
- Author: stefano babic <sbabic@denx.de>
- Date: Tue Nov 20 10:40:24 2007 +0100
- MMC for PXA 27X (resubmit)
- MMC support for X_Scale PXA is broken and does not work.
- Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
- There were already some patches around the world but none of them was
- merged into the official u-boot tree.
- This patch makes order fixing this issue. Resubmit after code cleanup.
- Applied and tested on PXA 270 (TrizepsIV module).
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
- Author: stefano babic <sbabic@denx.de>
- Date: Tue Nov 20 10:37:04 2007 +0100
- Fix gcc issues in pxa-regs.h
- Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
- issues generates wrong code.
- (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
- This patch fixes the problem and solves the gcc-4 issues as the linux
- kernel does.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
- commit 7047b388876e7b905b2ec4edb8010543e3641b85
- Author: Jens Gehrlein <sew_s@tqs.de>
- Date: Tue Jan 29 08:45:03 2008 +0100
- TQM834x: enable DHCP
- Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
- Author: Jens Gehrlein <sew_s@tqs.de>
- Date: Tue Jan 29 08:45:02 2008 +0100
- TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
- Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8931ab176025b03cfc320b3fd1eca432a88ed560
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sat Jan 26 23:41:19 2008 -0500
- Fix conditional compilation of mpx8xxx_spi driver
- This driver should only compile if CONFIG_MPC8XXX_SPI is set
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 63f732d3d3880feb531f48af247c025bf01462b0
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Tue Jan 29 17:00:34 2008 +0100
- API: Provide dummy halt() in the glue layer.
- This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Tue Jan 29 16:57:38 2008 +0100
- API: Convert conditional building to the new scheme.
- This fixes a build breakage with CONFIG_API enabled, which appeared after
- the recent changes in the U-Boot build system.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit 98b742489c09780be6a832eeaa4e5eff824792bb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jan 25 09:56:17 2008 +0100
- inka4x0: remove dead code
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:06 2008 -0600
- 86xx: Add reginfo command
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit ddcebcb638715a6278da93b553d5016f99823816
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:05 2008 -0600
- 86xx: Add print_laws function to fsl_law.c
- This can be used for debug, and will be used by board code
- to help implement reginfo.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:04 2008 -0600
- 86xx: Remove old-style law setup code
- This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 713d8186649dae874613d495b0cecaa039a98b30
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:03 2008 -0600
- 86xx: Convert sbc8641d to use new law setup code.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 031976f6364b93833e989f57e9f1e023e0be8c4c
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:02 2008 -0600
- 86xx: Convert mpc8610hpcd to new law setup method.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 4933b91f8a49e436681f163df3173beb91cac44a
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:01 2008 -0600
- 86xx: Support new law setup method and convert mpc8641
- Adds the support code in cpu/mpc86xx for the new law setup code
- recently created fsl_law.c, and changes the MPC8641HPCN config
- to use this code.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:00 2008 -0600
- 86xx: Rearrange the sequence in start.S
- * split the BAT initialization so that only 2 BATs (for the boot page
- and stack) are programmed very early on. The rest are initialized later.
- * Move other BAT setup, ccsrbar setup, and law setup later in the code
- after translation has been enabled.
- These changes will facilitate the moving of law and BAT initialization
- to C code, and will aid with 36-bit physical addressing support.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 23 14:41:37 2008 +0100
- Coding Style Cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 23 14:31:17 2008 +0100
- Coding Style Cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 18 10:07:04 2008 +0800
- mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
- The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
- cause the 83xx immap broken, so the DMA and PCI will
- be failed.
- The patch fix the struct spi8xxx and rm struct spi83xx.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Apr 14 17:11:49 2007 +0200
- AVR32: ATNGW100 board support
- Add support for the ATNGW100 Network Gateway reference design,
- including flash, ethernet and MMC support.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit e006927a0b9a54e8ee7685d8ac748aaad6801862
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 24 18:15:31 2007 +0100
- AVR32: Initialize ipaddr, loadaddr and bootfile at startup
- I don't know why the relevant layers can't do this by itself, but this
- is what ppc does.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 799891ef7b1b3432032ec23466df6b665a797fa4
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Fri Jan 18 00:04:28 2008 +0100
- Add AcTux board support
- Hi,
- The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
- files that
- contain changes for multiple boards, the board-specific files follow as
- separate patches.
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit 66a4344a4d910a11125df7768899ad529719855e
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Wed Jan 16 19:53:23 2008 +0100
- add AcTux-4 board support
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit bc24345e4101a5c996d6b48ce497b09c53025dc6
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Wed Jan 16 19:51:55 2008 +0100
- add AcTux-3 board support
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit aebf00fc4d1343b24715373893f7b20bf462d1e9
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Wed Jan 16 19:51:14 2008 +0100
- add AcTux-2 board support
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit ea99e8f05b7240fd657739e286664664ae160abe
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Wed Jan 16 19:50:37 2008 +0100
- add AcTux-1 board support
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jan 14 19:20:08 2008 +0100
- ARM: remove useless function board_post_init
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 96bd462942022e4569b582c072a0ed26de1cd19b
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Thu Jan 10 14:59:46 2008 +0100
- IXP: enable RTS
- enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
- No handshaking is done, but the active RTS signal allows to
- connect to the target using a PC which is using RTS/CTS
- handshake, and does no harm if the PC is set to ignore RTS.
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jan 7 08:41:34 2008 +0100
- IXP: add dynamic microcode addr
- allow to load the microde from flash or ram by download it through
- the serial or other.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Sat Nov 10 15:44:12 2007 +0100
- load ixp42x NPE firmware from separate flash block, remove dead code
- Hi,
- the following patch adds support to move the IXP42X NPE firmware to a
- separate flash block, whose start address is defined in
- CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
- NPE-enabled u-boot without copyright problems due to the NPE firmware.
- I hope the patch applies, I get whitespace-related differences in the NPE
- files due to trailing whitespace in the original versions.
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 14:15:46 2008 -0600
- ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 14:02:49 2008 -0600
- ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 777d1abd9796f1c2e148417cc10657e847d318ce
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 14:00:25 2008 -0600
- ColdFire: Add MCF547x_8x FEC driver
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:54:09 2008 -0600
- ColdFire: Add MCF547x_8x dma code and header files
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:52:03 2008 -0600
- ColdFire: Add MCF547x_8x dma code - 2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:48:52 2008 -0600
- ColdFire: Add MCF547x_8x dma code - 1
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:39:44 2008 -0600
- ColdFire: Add MCF547x_8x related header files
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:37:34 2008 -0600
- ColdFire: Add MCF547x_8x cpu arch
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit e2756f4b54aba0e0523b81dd145666829cf7fd59
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:47:23 2008 -0600
- ColdFire: Add MCF5227x cpu and M52277EVB support-3
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit c87581027994c148131b2f11aa75501f782ec19a
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:46:19 2008 -0600
- ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:43:33 2008 -0600
- ColdFire: Add MCF5227x cpu and M52277EVB support-1
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:35:44 2008 -0600
- ColdFire: Fix CFI Flash low level Read/Write macro
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:23:08 2008 -0600
- ColdFire: Add M5373EVB platform support - 2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:19:54 2008 -0600
- ColdFire: Add M5373EVB platform support - 1
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:17:03 2008 -0600
- ColdFire: Update FlexBus CS for MCF532x
- Definition update and change from 16bit to 32bit
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:11:47 2008 -0600
- ColdFire: PCI and misc updates for MCF5445x
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:06:55 2008 -0600
- ColdFire: MCF5445x header files cleanup
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 16:59:42 2008 -0600
- ColdFire: MCF532x header files cleanup
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 7af7751d047e74b2ec58400f97b879c56446b3e8
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 15:30:15 2008 -0600
- ColdFire: Add modules header files
- Add CF specific modules header files
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Jan 17 12:48:00 2008 -0600
- codingstyle cleanup for spi driver
- ..and rm unused CONFIG_FSL_SPI define
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d59feffb42c9f174116db7a82a311df98983dfce
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Wed Jan 16 17:12:12 2008 -0500
- FSL: Fix common EEPROM_data structure definition
- - Fix EEPROM_data structure definition according to System EEPROM Data Format.
- - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
- bd->bi_ethaddr.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 6bee764bd6da510a4aad614880300c968bc7318d
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 16 15:48:12 2008 -0600
- 86xx: enable command-line editing
- Enable command-line editing for all MPC86xx boards.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Wed Jan 16 22:37:42 2008 -0500
- Implement hard SPI driver on MPC8349EMDS
- This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
- This board has an ST M25P40 4Mbit EEPROM on its SPI bus
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Wed Jan 16 22:37:35 2008 -0500
- Add support for a Freescale non-CPM SPI controller
- This patch adds support for the SPI controller found on Freescale PowerPC
- processors such as the MCP834x family. Additionally, a new config option,
- CONFIG_HARD_SPI, is added for general purpose SPI controller use.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a8cb43a89be6cfd283257a603dd9841503ccce0f
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 17 18:23:19 2008 +0800
- mpc83xx: Fix the fatal conflict of merge
- The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
- will cause the mpc8315erdb board can't boot up.
- The patch fix that bug, and remove the duplicated #ifdef
- CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
- MPC8313E processor.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3259eeaa4148125a81417477f62c05bd67f60587
- Author: Larry Johnson <lrj@acm.org>
- Date: Thu Jan 17 08:50:09 2008 -0500
- Merge Sequoia beautification into Korat code
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit e16925773211291b562e77187061e9dd1d757217
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Jan 17 07:45:05 2008 +0100
- net: add 'ethrotate' environment variable
- [PATCH] net: add 'ethrotate' environment variable
- This patch replaces the buildtime configuration option
- CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
- configuration veriable. See README.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 17 14:29:04 2008 +0100
- ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Jan 17 18:07:32 2008 +0900
- sh: Remove CONFIG_COMMANDS from MS7720SE config file
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 055606bd25e88c0cd04ad348a679a04b1b616bee
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Jan 16 18:39:20 2008 +0100
- ppc4xx: Netstal HCU4 board: added various fixes and POST
- - Moved some common code to netstal/common/nm_bsp.c.
- - sdram initialisation goes go netstal/common/fixed_sdram.c.
- - Added support for POST.
- - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 69b0634a4ee98c9791815600d43b99f626a952f3
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Thu Jan 17 12:53:56 2008 +0100
- ppc4xx: netstal/common define routines used by all boards
- Added some routines used by all Netstal boards:
- - nm_bsp.c: - nm_show_print and
- - common_misc_init_r
- - set_params_for_sw_install. Very specific code to handle our SW
- installation procedure
- - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
- to handle sdram initialization.
- - nm.h: Common header
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Jan 16 18:39:18 2008 +0100
- ppc4xx: Netstal HCU5 board: added various fixes and POST
- - Moved some common code to nestal/common/nm_bsp.c.
- - Added support for the vxWorks EDR.
- - Enable trace for Lauterbach, if present.
- - Added support for POST.
- - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 4371090e5da77edc7bf9f296364db4801639d9c4
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Jan 16 18:39:08 2008 +0100
- ppc4xx: Netstal HCU5 board. Added POST. Various fixes
- - Various fixes
- - Reduced rom_size from 384 to 320 kB
- - Environment is now in flash
- - Added POST
- - Support for OF
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Jan 16 18:37:50 2008 +0100
- ppc4xx: Netstal HCU4 board. Added POST. Various fixes
- - Various fixes
- - Reduced rom_size from 384 to 320 kB
- - Environment is now in flash
- - Added POST
- - Support for OF
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Jan 17 10:53:08 2008 +0100
- ppc4xx: Complete DU440 board support
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Jan 17 10:52:30 2008 +0100
- ppc4xx: Add DU440 board support
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit ac331da07db3860f11fa1d0fd3db7c810bce1198
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Jan 17 15:53:52 2008 +0900
- sh: Update SuperH SCIF driver
- This patch fixed wrong SH7720 CPU macro and changed macro that
- calculated value of SCBRR register.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Wed Jan 16 15:12:47 2008 +0100
- Set ips dividor to 1/4 of csb clock.
- Previous setting cause ips clock to be out of spec. This bug was found by John
- Rigby from Freescale.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 02:19:18 2008 -0600
- 85xx: Get ride of old TLB setup code
- Now that all boards have been converted, remove old config code and the
- config option for the new style.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 02:02:10 2008 -0600
- 85xx: Convert TQM85xx to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 74121b470c14f7eaf284ee838bffca6f9521069e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:56:32 2008 -0600
- 85xx: Convert STXGP3 & STXSSA to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:44:34 2008 -0600
- 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 818218bac6a11591e2542c344d2330e0f4e1968b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:31:34 2008 -0600
- 85xx: Convert PM854/PM856 to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:25:33 2008 -0600
- 85xx: Convert MPC8540EVAL to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:12:22 2008 -0600
- 85xx: Convert MPC8568 MDS to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:01:09 2008 -0600
- 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 00:52:29 2008 -0600
- 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 00:32:17 2008 -0600
- 85xx: Convert ATUM8548 to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 23:11:57 2008 -0600
- 85xx: Convert MPC8544 DS to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 22:38:34 2008 -0600
- 85xx: Reworked initial processor init
- Reworked the initial processor initialzation sequence:
- * introduced cpu_early_init_f that is run in address space 1 (AS=1)
- * Moved TLB/LAW and CCSR init into cpu_early_init_f()
- * Reworked initial asm code to do most of the core init before TLBs
- The main reasons for these changes are to allow handling of 36-bit phys
- addresses in the future and some of the issues that will exist when we
- do that.
- There are a few caveats on what can be initialized via the LAW and TLB
- static tables:
- * TLB entry 14/15 can't be initialized via the TLB table
- * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
- the code that is currently executing.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 44a23cfd6360a68eaa41f945190618a55519eac3
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 22:33:22 2008 -0600
- 85xx: Introduce new tlb API
- Add a set of functions to manipulate TLB entries:
- * set_tlb() - write a tlb entry
- * invalidate_tlb() - invalidate a tlb array
- * disable_tlb() - disable a variable size tlb entry
- * init_tlbs() - setup initial tlbs based on static table
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit be88b1699863c262818f3af7f60173b4d48df8fc
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 17 07:50:17 2008 +0100
- ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 10:04:42 2008 -0600
- 85xx: Use proper defines for PCI addresses
- We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
- While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
- be used for configuring the PCI ATMU.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 54a5070115eff38e9b324b78abdfa0b4520580b9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:22:29 2008 -0600
- 85xx: Remove old style of LAW init
- All boards are now using the new fsl_law code so we can drop the old version.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:15:29 2008 -0600
- 85xx: convert remaining 85xx boards over to use new LAW init code
- Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
- to use new LAW init code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 572b13afc42710f2957c382a710360429c0e099b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:11:53 2008 -0600
- 85xx: convert STXGP3/STXSSA over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 45f2166ac0233a9263058378f39612bd11f61196
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:06:48 2008 -0600
- 85xx: convert PM854/PM856 over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:05:27 2008 -0600
- 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 01:45:10 2008 -0600
- 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 01:32:06 2008 -0600
- 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 01:16:16 2008 -0600
- 85xx: convert MPC8544 DS over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 83d40dfd79fe868796275802f60116d84b9e4395
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 01:13:58 2008 -0600
- 85xx: Move LAW init code into C
- Move the initialization of the LAWs into C code and provide an API
- to allow modification of LAWs after init.
- Board code is responsible to provide a law_table and num_law_entries.
- We should be able to use the same code on 86xx as well.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit bed8ce838a609aaab136d43b25e6df2a520bc854
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Dec 22 15:03:12 2007 +0100
- qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0764c164fed6277d359cf132d55187ea34290114
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Wed Jan 16 19:27:51 2008 +0200
- MIPS:Target support for qemu -M mips
- With serial, NE2000, IDE support. Tested in big-endian mode.
- Memory size hard-coded to 128M for now, so don't play with
- the -m option.
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Jan 11 00:01:37 2008 +0100
- Fix nfs command help to reflect that the serverip is optional
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Dec 10 22:32:14 2007 +0100
- bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
- and move is_valid_ether_addr board file
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit c2f896b8fc4722e36915903e1942e138e68ce804
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Wed Jan 16 16:13:31 2008 +0900
- drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
- rx_status on the memory is basically in LE, but needs to be handled in CPU
- endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
- it'll work fine.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Cc: Masami Komiya <mkomiya@sonare.it>
- Cc: Lucas Jin <lucasjin@gmail.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 96a236746fe6a7b84802afb4ed31536696d34812
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Wed Jan 16 16:12:26 2008 +0900
- drivers/net/rtl8139.c: Fix cache coherency issues
- Current driver is meant for cache coherent systems. This patch adds
- flush_cache() routines to support cache non-coherent systems.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Cc: Masami Komiya <mkomiya@sonare.it>
- Cc: Lucas Jin <lucasjin@gmail.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d1276c76c1e2b5035296689280ba1acb2c425104
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Wed Jan 16 16:11:14 2008 +0900
- drivers/net/rtl8139.c: Fix tx timeout
- "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
- does, the condition "(currticks() < to)" becomes invalid and immediately
- leads to tx timeout error. This patch introduces the fine-graded udely(10)
- loops to ease the impact of wrapping around.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Cc: Masami Komiya <mkomiya@sonare.it>
- Cc: Lucas Jin <lucasjin@gmail.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 11 18:45:28 2008 +0800
- TSEC: Add the support for RealTek RTL8211B PHY
- Add the support of RealTek RTL8211B PHY, the RTL8211B
- PHY only supports RGMII and MII mode.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 84a3047b72b70e862b0b7a8e2058077457f89a32
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Wed Jan 16 09:40:41 2008 +0100
- Remove annoying debug printout for PHY less boards.
- PHY less board prints out lots of "read wrong ...":
- read wrong value : mii_id 3,mii_reg 2, base e0102320
- read wrong value : mii_id 3,mii_reg 3, base e0102320
- UEC: PHY is Generic MII (ffffffff)
- read wrong value : mii_id 3,mii_reg 4, base e0102320
- read wrong value : mii_id 3,mii_reg 0, base e0102320
- read wrong value : mii_id 3,mii_reg 1, base e0102320
- read wrong value : mii_id 3,mii_reg 1, base e0102320
- read wrong value : mii_id 3,mii_reg 5, base e0102320
- read wrong value : mii_id 3,mii_reg 1, base e0102320
- read wrong value : mii_id 3,mii_reg 1, base e0102320
- read wrong value : mii_id 3,mii_reg 5, base e0102320
- FSL UEC0: Full Duplex
- FSL UEC0: Speed 100BT
- FSL UEC0: Link is up
- Using FSL UEC0 device
- Make this printout depend on UEC_VERBOSE_DEBUG and
- remove its definition in uec_phy.c
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 15 14:11:00 2008 -0600
- net: reduce boot latency on QE UEC based boards
- actually polling for PHY autonegotiation to finish enables us to remove the
- 5 second boot prompt latency present on QE based boards.
- call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
- uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
- code shamelessly stolen from tsec driver.
- also rm unused CONFIG_RMII_MODE code.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
- Author: michael.firth@bt.com <michael.firth@bt.com>
- Date: Wed Jan 16 11:40:51 2008 +0000
- TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
- The current TSEC driver limits MDIO access to the devices that have been configured as attached
- to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
- Signed-off-by: Michael Firth <michael.firth@bt.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 16 00:38:05 2008 -0600
- Add support for the MPC837xERDB
- MPC837xERDB board support includes:
- * DDR2 330MHz hardcoded (soldered on the board)
- * Local Bus NOR Flash
- * I2C, UART and RTC
- * eTSEC RGMII (TSEC0 - RTL8211B with MII;
- * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
- * load)
- Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
- Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 16 12:06:16 2008 -0600
- mpc83xx: add support for more system clock performance controls
- System registers that are modified are the Arbiter Configuration
- Register (ACR), the System Priority Control Register (SPCR), and the
- System Clock Configuration Register (SCCR).
- Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
- Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 16c3cde050e2d243e62b37486f1558570787beb8
- Author: James Yang <james.yang@freescale.com>
- Date: Wed Jan 16 11:58:08 2008 -0600
- FSL: Generalize PIXIS reset command parsing.
- Before, the order of arguments to the pixis_reset
- command needed to be supplied in a hard-coded order.
- Generalize the command parsing to allow any order.
- Signed-off-by: James Yang <james.yang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit ad8f8687b78c3e917b173f038926695383c55555
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jan 15 13:42:41 2008 -0600
- FSL: Convert board/freescale/common/Makefile to use CONFIG_
- Convert the board/freescale/common/Makefile to use
- CONFIG_* options to select which files to conditionally
- compile into the board/freescale/common library rather
- than conditionally compiling entire files.
- Now handles::
- CONFIG_FSL_PIXIS
- CONFIG_FSL_DIU_FB
- CONFIG_PQ_MDS_PIB
- CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7c2221eb230372a9e537c4f6636b147b0909325f
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Tue Jan 15 16:38:38 2008 +0800
- Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
- Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
- Remove unused ethernet CONFIG_ options.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 711a7946277d2e29af481011e8635e9975c54e45
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 15 14:05:14 2008 -0600
- mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
- continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 363eea9ff7f19a2cba17f262bd17559f166e134e
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 15 09:51:12 2008 -0600
- mpc83xx: clean up mpc8360emds.c warnings
- mpc8360emds.c: In function 'ft_board_setup':
- mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
- mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
- mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
- mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
- mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
- mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Jan 14 16:14:46 2008 -0600
- mpc83xx: fix phy-connection-type fixup code
- use tree passed to us in local blob, not global fdt.
- Also use fdt_path_offset to convert to relative offset, since absolute
- reference is needed to check for rgmii-id mode string value.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2b4c952be7c4357a13e839d48df80853820c33eb
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jan 14 09:01:40 2008 -0600
- mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e1d8ed2c08da14b168658cc5fa78529d461aea70
- Author: Poonam Aggrwal <b10812@freescale.com>
- Date: Mon Jan 14 09:41:14 2008 +0530
- Changes in uboot DDR configuration for MPC8313eRDB
- These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
- DDR configuration in u-boot code. Some are related to performance, some
- affect stability and some correct few basic errors in the current
- configuration.
- The changes have been tested and found to give better memory latency
- figures on MPC8313eRDB.LMBench figures prove it.
- The changes are:
- - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
- (this may improve performance for application with many read
- or write to open pages).
- - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
- 001 (activating all the CS when only one is used may cause
- unwanted noise on the system)
- - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
- Tras=45ns)
- - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
- - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
- comply with the 3 ODT clk requirements)
- - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
- - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
- - DDR_SDRAM_MODE[AL]changed from 0 to 1.
- - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
- - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
- - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
- The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
- The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
- Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
- Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
- Cc: Razzaz Mazyar <MRazzaz@freescale.com>
- Cc: Josep P J <PJ.Joseph@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Sat Jan 12 13:24:14 2008 -0500
- Enable the isdram command on the MPC8360EMDS board
- The isdram command prints out decoded information the "serial presence
- detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
- debugging memory configuration problems.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8bd522ce4afda3d4868ee8c913f5394094326be1
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 11 18:48:24 2008 +0800
- mpc83xx: Add the support for MPC8315ERDB board
- The features list:
- - Boot from NOR Flash
- - DDR2 266MHz hardcoded configuration
- - Local bus NOR Flash R/W operation
- - I2C, UART, MII and RTC
- - eTSEC0/1 support
- - PCI host
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b05884efa614e4d8a9413158fc228e0dc02ab704
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 11 18:46:50 2008 +0800
- mpc83xx: Add config of eTSEC emergency priority in SPCR
- The TSEC emergency priority definition of 831x/837x
- is different than the definition of 834x in SPCR register.
- Add the other config of TSEC emergency priority into
- cpu_init.c
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 11 18:42:19 2008 +0800
- mpc83xx: Remove cache config from MPC8360ERDK.h
- The MPC8360ERDK board support patch is added before
- the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
- so, miss clean up it.
- The patch clean up the miss cache config.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit cd9d23053d435c08fc8695017b5cb9003fcda786
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Jan 14 23:09:32 2008 +0300
- nand: FSL UPM NAND driver
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 6cb2239ae76faee64434286c4f8fc71374702dd2
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Jan 15 08:59:44 2008 +0900
- OneNAND: Separate U-Boot dependent code from OneNAND
- OneNAND: Separate U-Boot dependent code from OneNAND
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Jan 16 10:33:46 2008 +0100
- ppc4xx: Sequoia coding style cleanup and beautification
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
- Author: Larry Johnson <lrj@acm.org>
- Date: Tue Jan 15 14:35:58 2008 -0500
- ppc4xx: Refactor ECC POST for AMCC Denali core
- The ECC POST reported intermittent failures running after power-up on
- the Korat PPC440EPx board. Even when the test passed, the debugging
- output occasionally reported additional unexpected ECC errors.
- This refactoring has three main objectives: (1) minimize the code
- executed with ECC enabled during the tests, (2) add more checking of the
- results so any unexpected ECC errors would cause the test to fail, and
- (3) use synchronization (only) where required by the processor.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 2465665b73ac2f688af945b1ed510752afa816a4
- Author: David Saada <David.Saada@ecitele.com>
- Date: Tue Jan 15 10:40:24 2008 +0200
- QE UEC: Extend number of supported UECs to 4
- This patch extends the number of supported UECs to 4. Note that the
- problem of QE thread resources exhaustion is resolved by setting the
- correct number of QE threads according to Ethernet type (GBE or FE).
- Signed-off-by: David Saada <david.saada@ecitele.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 16 00:01:01 2008 +0100
- LWMON5: enable hush shell as command line parser
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jan 15 17:22:28 2008 +0100
- ADS5121: disable watchdog; enable image timestamps
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jan 15 17:21:28 2008 +0100
- TK885D: fixes for bigger flash sector sizes on new modules;
- adjust default environment;
- disable SCC ethernet (not used on this board).
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jan 15 17:48:13 2008 +0900
- pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jan 15 23:25:25 2008 +0900
- sh: Add support SH7710/SH7712
- SH7710/SH7712 of SH3 CPU are supported.
- SH771X is called SH-Ether, and has the Ether controller in CPU.
- The driver of Ether is not included in this patch.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 63a11be68306870e04d3851ed9fa41955cdf4894
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jan 15 23:06:17 2008 +0900
- sh: Add support of map_physmem() and unmap_physmem() to SuperH
- This patch add the support of map_physmem() and unmap_physmem()
- used with Common Flash Interface(CFI) driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Jan 9 14:42:27 2008 +0900
- sh: Add maintainer of MS7720SE to the MAINTAINER file
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Jan 9 14:39:58 2008 +0900
- sh: Fix board name in MS7720SE's config.mk
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c0a04d93734d768b39dbb72fb501b65614c8615d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Jan 9 14:37:36 2008 +0900
- sh: Add MS7720SE to MAKEALL
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Mon Dec 3 22:58:50 2007 +0900
- sh: Add support for MS7720RP02 board
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Wed Jan 9 14:30:02 2008 +0900
- sh: Add support for SH7720 in serial_sh driver.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Mon Dec 3 22:58:45 2007 +0900
- sh: Add support SH3 and SH7720
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 15 10:11:02 2008 +0100
- ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 17bef68097ab3692500a36fb31115bff7910aa99
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Mon Jan 14 14:04:42 2008 +0100
- ppc_4xx: Fix post spr.c for PPC405
- post/cpu/ppc4xx/spr.c contained a few checks for registers only present
- for PPC440 and derivates processor.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 06c428bcd4413014b43236e77765022071424fa6
- Author: Dave Liu <r63238@freescale.com>
- Date: Mon Jan 14 11:12:01 2008 +0800
- QE: fix compile warning
- qe.c: In function 'qe_upload_firmware':
- qe.c:390: warning: pointer targets in passing argument 2
- uec.c: In function 'uec_initialize':
- uec.c:1236: warning: 'uec_info' may be used uninitialized
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit a0dd99d51efa55fe023e19c97ead92683725eb11
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jan 14 10:05:05 2008 +0100
- ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
- Now that bit 29 is the USB PHY reset bit, update the Kilauea port
- to remove the USB PHY reset after powerup. The CPLD will keep the
- USB PHY in reset (active low) until the bit is set to 1 in
- board_early_init_f().
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 23:26:45 2008 +0100
- ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 23:37:50 2008 +0100
- ADS5121: Fix typo in ads5121.c, adjust default environment
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
- Author: John Rigby <jrigby@freescale.com>
- Date: Fri Aug 24 18:18:43 2007 -0600
- ADS5121: MAX slew rate for PATA pins
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit dd531aac34aaad138f16cacdb51d61908d59c0e2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 21:05:52 2008 +0100
- Fix Makefile dependency problem with parallel builds.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 19:51:39 2008 +0100
- MPC8544DS: fix board Makefile for silent build (with -s)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 16:44:08 2008 +0100
- PMC440 board: fix board Makefile for out-of-tree building
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 16:07:44 2008 +0100
- Makalu: fix compile warning
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Jan 13 12:36:12 2008 +0100
- cmd_nand : fix compiler warning.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
- Author: Michael Schwingen <rincewind@discworld.dascon.de>
- Date: Sat Jan 12 20:29:47 2008 +0100
- CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 02:19:44 2008 +0100
- MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 02:19:13 2008 +0100
- MPC8xx FEC driver: fix compiler warning.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 00:59:21 2008 +0100
- Fix Makefile dependencies issues; allow silent build
- - get rid of "version" target whichdidn't really work
- - make autoconf.mk depend on version_autogenerated.h to make sure
- to rebuild files as needed
- - add XECHO macro to allow for silent build using "make -s"
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 00:55:47 2008 +0100
- ADS5121e: fix compile warning
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f2b6f4610627fe3d607620e25082916a01538875
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 00:55:18 2008 +0100
- MUNICes: fix board Makefile for remote build directory
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
- Author: Oliver Weber <almoeli@gmx.de>
- Date: Wed Jan 9 17:04:38 2008 +0100
- MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
- Signed-off-by: Oliver Weber <almoeli@gmx.de>
- commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
- Author: Andreas Engel <andreas.engel@ericsson.com>
- Date: Wed Jan 9 17:10:56 2008 +0100
- Make bootretry work when command line editing is enabled
- Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
- This patch fixes the problem.
- Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
- commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
- Author: Larry Johnson <lrj@acm.org>
- Date: Fri Jan 11 23:26:18 2008 -0500
- Refactor code for "i2c sdram" command
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 0df6b8446c4721b91ce311548114891130371083
- Author: Larry Johnson <lrj@acm.org>
- Date: Thu Jan 10 22:23:39 2008 -0500
- Fix "i2c sdram" command for DDR2 DIMMs
- Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
- "i2c sdram" command. This patch provides correct alternative
- interpretations when DDR2 memory is detected.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 64134f011254123618798ff77c42ba196b2ec485
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jan 12 20:31:39 2008 +0100
- Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
- With recent toolchain versions, some boards would not build because
- or errors like this one (here for ocotea board when building with
- ELDK 4.2 beta):
- ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
- For many boards, the .bss section is big enough that it wraps around
- at the end of the address space (0xFFFFFFFF), so the problem will not
- be visible unless you use a 64 bit tool chain for development. On
- some boards however, changes to the code size (due to different
- optimizations) we bail out with section overlaps like above.
- The fix is to add the NOLOAD attribute to the .bss and .sbss
- sections, telling the linker that .bss does not consume any space in
- the image.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3afac79ec27b91df185f090b31dad9620779f440
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Fri Jan 11 20:42:58 2008 -0600
- USB: Add Philips 1561 PCI-OHCI ids
- (needed for M5475EVB)
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 5e8def6731cd7bec74bff42a16b139de04010353
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jan 12 15:51:34 2008 +0100
- Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
- boards.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Jan 11 12:03:43 2008 +0100
- MPC512X: Cleanup bus clock names.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Jan 8 17:16:59 2008 +0100
- MPC512X: Fixed typo in macro name.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Jan 8 17:16:15 2008 +0100
- ads5121: Added support for FDT.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jan 12 01:05:50 2008 +0100
- Coding Style cleanup; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 15:15:17 2008 +0100
- Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 15:15:16 2008 +0100
- MUNICes: Set the right CFG_DEFAULT_MBAR value.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 15:15:15 2008 +0100
- added the config File for the MUNICes board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 15:15:14 2008 +0100
- added basic support for the MUNICes board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jan 12 00:39:37 2008 +0100
- Update CHANGELOG and MAINTAINERS files.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5ba7390c3cb579172be66888a371707b47b5be4e
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Jan 11 02:15:02 2008 +0100
- Fix compilation problem in common/cmd_bmp.c
- common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
- isn't defined. This patch fix this.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 01:12:09 2008 +0100
- Fix defaultconfig for the mgcoge board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit ac9db066b26935f31bff15c98168b19faeb603f3
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 01:12:08 2008 +0100
- Added support for the mgcoge board from keymile.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 01:12:07 2008 +0100
- Enable SMC microcode relocation patch for SMC1.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 01:12:06 2008 +0100
- Added support for the mgsuvd board from keymile.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit bf05293973b348f6946c9df92cd3c65ece42d0be
- Author: James Yang <james.yang@freescale.com>
- Date: Thu Jan 10 16:02:07 2008 -0600
- Fix 64-bit vsprintf.
- There were some size and unsigned problems.
- Also add support for "ll" size modifier in format string like glibc
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 92fa37eac530860643afa26ae347af3d23d67309
- Author: Larry Johnson <lrj@acm.org>
- Date: Wed Jan 9 12:42:35 2008 -0500
- Remove superfluous preprocessor conditionals from LM73 driver
- (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
- (2) Use conditional Makefile.o.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit efc6f447c1b940d1650c4b854c5598a595ddc3da
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Jan 10 17:59:07 2008 +0100
- Add support for the TK885D baseboard from TELE-DATA
- The TK885D board uses a TQM885D module from TQ, this port adds an
- own configuration file and adds a last_stage_init() method to
- configure the two PHYs, depending on the phy_auto_nego environment
- variable.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 10 02:22:05 2008 -0600
- Fix compiler warning
- main.c: In function 'readline_into_buffer':
- main.c:927: warning: unused variable 'p_buf'
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Jan 11 14:30:01 2008 +0100
- Add Fujitsu CoralP/Lime video driver
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Jan 11 02:39:47 2008 +0100
- Fix video console newline and carriage return handling
- Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
- are not displayed correctly. This is an attempt to fix
- this issue. Also add carriage return handling.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 11 15:53:58 2008 +0100
- ppc4xx: Fix sdram init on Sequoia boards
- Clear possible errors in MCSR resulting from data-eye-search.
- If not done, then we could get an interrupt later on when
- exceptions are enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d610a60730b7464f6f659db49d264d89a7c71061
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Jan 11 15:31:09 2008 +0100
- ppc4xx: Rework Lime support for lwmon5
- Rework Lime support for lwmon5 using new video driver
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Jan 11 14:55:16 2008 +0100
- ppc4xx: Update PMC440 config file
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Jan 11 14:55:08 2008 +0100
- ppx4xx: Fix sdram init on PMC440 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 061aad4d320dddce26247699dcf2875ee2ea1366
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:09:33 2008 +0800
- mpc83xx: Fix the bug of 266MHz data rate DDR
- The DDR doesn't work on the 266MHz data rate,
- the patch fix the bug.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ded08317ad9e340b887bf2eb46e9565a0f610a93
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:08:26 2008 +0800
- mpc83xx: Make the code more readable
- Format the code, make it more readable
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:07:23 2008 +0800
- mpc83xx: Reduce the latency of DDR
- Reduce the AL from 2 to 1 clock to improve the performance.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:06:05 2008 +0800
- mpc83xx: Fix the wrong definition of MPC8315E
- According to the latest user manual of MPC8315E,
- 1) The SVCOD of HRCWL is different than 837x
- 2) The SCCR has changes
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ec2638ea08a537a1bd409db873aaaa33a053ebae
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:05:00 2008 +0800
- mpc83xx: Fix the typo in mpc83xx.h
- The SPCR about TSEC priority is wrong.
- Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
- Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:04:13 2008 +0800
- mpc83xx: Fix the typo in global data struct
- Fix the typo in global_data.h
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2c5b48fc205c3e2752910da8f39209ed075929e5
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:03:03 2008 +0800
- mpc83xx: Remove cache config from config.h
- clean up the cache config from configs.h of board
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit fab6f556bbbbd1bb35a5433161f7f173c18df559
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed Jan 9 20:57:47 2008 +0300
- mpc83xx: add support for the MPC8360E-RDK
- This is MPC8360E based board with:
- - 256MB fixed SDRAM;
- - 8MB Intel Strata NOR flash;
- - StMICRO 64MiB NAND flash;
- - two 10/100/1000 ethernet ports connected via Broadcom
- BCM5481 PHYs;
- - two 10/100 ethernet ports connected via National
- DP83848 PHYs;
- - one PCI and one miniPCI slots;
- - four serial ports (two NS16550-compatible, two UCCs);
- - four USB ports working through MPC8360E "FHCI" USB controller;
- - Fujitsu MB86277 graphics controller;
- - Analog to Digital Converter/Touchscreen controller, AD7843
- connected to SPI.
- Features not supported in this patch are:
- - StMICRO 64MiB NAND flash (patch sent);
- - MINT framebuffer initialization (patch is pending);
- - Fetching production information from the EEPROM via I2C;
- - FHCI USB;
- - Two slow UCCs used as RS-485 UARTs.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed Jan 9 20:57:40 2008 +0300
- mpc83xx: add "fsl, qe" compatible fixups
- New device trees will use "fsl,qe" compatible properties.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 977b57583a7c34010e566a09a679ec3c1836f996
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 9 15:24:06 2008 -0600
- mpc83xx: add missing CONFIG_HAS_ETH0 defines
- the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
- is defined; add the define to the missing board configs.
- Thanks to Emilian Medve for finding this.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b830b7f1635984ba607219fcbd78597c28eeb529
- Author: Becky Bruce <bgill@freescale.com>
- Date: Thu Jan 10 14:00:28 2008 -0600
- 86xx: Support 2GB DIMMs
- Configure the number of bits used to address the banks inside the SDRAM
- device. The default register value of 0 means 2 bits to address 4 banks.
- Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
- Signed-off-by: Becky Bruce <bgill@freescale.com>
- commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Thu Jan 10 18:50:33 2008 +0100
- ppc4xx: Make Sequoia boot vxWorks
- vxWorks expects in
- TLB 0 a entry for the Machine Check interrupt
- TLB 1 a entry for the RAM
- TLB 2 a entry for the EBC
- TLB 3 a entry for the boot flash
- After changing the baudrate to 9600 I had no problems to boot the
- vxWorks image as distributed by WindRiver (Revision 2.0/1 from
- June 18, 2007)
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Wed Jan 9 23:10:27 2008 -0500
- ppc4xx: Fix dflush() to restore DVLIM register
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 252f60b068d1f94190b5bcfda169db582387e15e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Jan 10 03:52:44 2008 -0500
- Nios2: remove common/cmd_bdinfo.c unused variable.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Scott McNutt <smcnutt@psyent.com>
- commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Wed Jan 9 18:15:53 2008 -0500
- Fix Ethernet init() return codes
- Change return values of init() functions in all Ethernet drivers to conform
- to the following:
- >=0: Success
- <0: Failure
- All drivers going forward should return 0 on success. Current drivers that
- return 1 on success were left as-is to minimize changes.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Acked-by: Stefan Roese <sr@denx.de>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Acked-By: Timur Tabi <timur@freescale.com>
- commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jan 10 00:55:14 2008 +0100
- Coding Style cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 9 16:56:54 2008 -0600
- Add QE brg freq and correct qe bus freq fdt update code
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 890dfef06c2d169a3356359596890754dfb8ee1c
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Jan 9 16:34:51 2008 -0600
- Remove cache config from ATUM8548 and sbc8548 configs
- These boards weren't updated by Kumar's config patch because they
- weren't in the tree, yet.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Jan 7 13:31:19 2008 -0600
- 85xx: add ability to upload QE firmware
- Define the layout of a binary blob that contains a QE firmware and instructions
- on how to upload it. Add function qe_upload_firmware() to parse the blob and
- perform the actual upload. Add command-line command "qe fw" to take a firmware
- blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
- 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
- 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jan 8 01:22:21 2008 -0600
- 85xx: Remove cache config from configs.h
- Either use the standard defines in asm/cache.h or grab the information
- at runtime from the L1CFG SPR.
- Also, minor cleanup in cache.h to make the code a bit more readable.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
- Author: robert lazarski <robertlazarski@gmail.com>
- Date: Fri Dec 21 10:39:27 2007 -0500
- mpc85xx: Add support for ATUM8548 (updated)
- Add support for Instituto Atlantico's ATUM8548 board
- Signed-off-by: robert lazarski <robertlazarski@gmail.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
- Author: robert lazarski <robertlazarski@gmail.com>
- Date: Fri Dec 21 10:36:37 2007 -0500
- mpc85xx: Add support for ATUM8548 (updated)
- Add support for Instituto Atlantico's ATUM8548 board
- Signed-off-by: robert lazarski <robertlazarski@gmail.com>
- commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Dec 13 06:45:14 2007 -0600
- mpc85xx: Add support for SBC8548 (updated)
- Add support for Wind River's SBC8548 reference board.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Dec 13 06:45:08 2007 -0600
- mpc85xx: Add support for SBC8548 (updated)
- Add support for Wind River's SBC8548 reference board.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Signed-off by: Andy Fleming <afleming@freescale.com>
- commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Oct 22 19:58:19 2007 +0400
- MPC8568E-MDS: set up QE pario for UART1
- To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
- be set up appropriately.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit ad162249cb371e9e38971676f09be791e5f3cf4a
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Oct 22 18:12:46 2007 +0400
- MPC8568E-MDS: reset UCCs to use them reliably
- In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
- UCCs.
- p.s Similar code exists in the Linux kernel board file (for capability
- reasons with older U-Boots), but should be removed some day.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 2146cf56821c3364786ca94a7306008c5824b238
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Dec 19 01:18:15 2007 -0600
- Reworked FSL Book-E TLB macros to be more readable
- The old macros made it difficult to know what WIMGE and perm bits
- were set for a TLB entry. Actually use the bit masks for these items
- since they are only a single bit.
- Also moved the macros into mmu.h out of e500.h since they aren't specific
- to e500.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1d47273d46925929f8f2c1913cd96d7257aade88
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Dec 18 23:21:51 2007 -0600
- Use FSL Book-E MMU macros from Linux Kernel
- Grab the FSL Book-E MAS register macros from Linux. Also added
- defines for page sizes up to 4TB and removed SHAREN since it doesnt
- really exist.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Jan 9 13:51:32 2008 -0600
- Fix my own merge stupidity
- Way back in August I merged Heiko's patch:
- 566a494f592: [PCS440EP] upgrade the PCS440EP board
- with Jon's CONFIG_COMMANDS patches.
- This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
- However, in the process, I left out some of Heiko's good changes.
- Now Heiko's and Jon's patches are properly merged in fat_register_device()
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
- Author: James Yang <James.Yang@freescale.com>
- Date: Wed Jan 9 11:17:49 2008 -0600
- Expose parse_line() globally.
- Add new function readline_into_buffer() that allows the
- output of readline to be put into a pointer to char buffer.
- This refactoring allows other functions besides the
- main command loop to also use the same input mechanism.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Wed Jan 9 01:15:25 2008 +0100
- trivial: fix consequences of a bad merge
- Fix what looks like a merge artifact.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Jan 3 10:51:15 2008 +0800
- Add Ctrl combo key support to usb keyboard driver.
- Ctrl combo key support is added, which is very useful to input Ctrl-C
- for interrupt current job.
- Also add usb_event_poll() calling to usb_kbd_testc(), which can get
- key input when tstc() is called.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Sun Dec 30 03:30:56 2007 +0100
- fix various comments
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 7817cb2083d982923752fe0f12b67c0e7c09a027
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Sun Dec 30 03:30:46 2007 +0100
- fix comments with new drivers organization
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit a9b410dc7d2a4721c408b13abfc037988150f145
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Fri Dec 28 12:50:59 2007 +0900
- Remove the obsolete terse version of do_mii()
- We now have more useful version of do_mii() and everybody use it.
- Gerald Van Baren says:
- > When I originally wrote the mii command 6(!) years ago, I wrote a
- > verbose version that printed human readable decomposition of the flags,
- > etc., and a terse one that didn't print as much stuff and thus had a
- > smaller memory footprint.
- >
- > It sounds like the terse version has withered and died, apparently
- > people are only using the verbose version (which is very understandable,
- > I do myself).
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 01c687aa6e065bd4faf80f723361e798941dd6b0
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Thu Dec 27 13:42:56 2007 -0500
- Do not reference sha1.c when building mkimage.
- remove sha1.o from mkimage linking since it isn't actually used.
- Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
- commit b9173af73e524d37c812f210173cf83385c5171a
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Thu Dec 27 15:39:54 2007 +0900
- common/cmd_mii.c: Add sanity argc check
- If type mii command without arguments, we suffer from uninitialized argv[]
- entries; for example we MIPS get stuck by TLB error.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 500856eb1707ed17d9204baa61dd59948d3b2899
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Wed Jan 9 19:39:36 2008 +0100
- API for external applications.
- This is an API for external (standalone) applications running on top of
- U-Boot, and is meant to be more extensible and robust than the existing
- jumptable mechanism. It is similar to UNIX syscall approach. See api/README
- for more details.
- Included is the demo application using this new framework (api_examples).
- Please note this is still an experimental feature, and is turned off by
- default.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Jan 9 12:14:55 2008 -0600
- 86xx: Remove cache config from configs.h
- Just use the standard defines in asm/cache.h.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 26a41790f8eba19ad450e18ae91351daf485b3e2
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Wed Jan 9 18:05:27 2008 +0100
- Globalize envmatch()
- The newly introduced API (routines related to env vars) will need to call
- it.
- Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
- commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Jan 4 12:07:27 2008 -0600
- Convert MPC8610HPCD to use libfdt.
- Assumes the presence of the aliases node in the DTS to
- locate the pci and serial nodes for fixups.
- Use consistent fdtaddr and fdtfile in environment variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Jan 4 11:58:23 2008 -0600
- 8610: Fix lingering compile warnings.
- Turn off DEBUG.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 9 15:14:46 2008 +0100
- Coding Style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Dec 18 04:29:55 2007 -0500
- fix easylogo on big endian dev systems
- didnt realize how out of shape easylogo actually was until i tried using it.
- this patch does byte swapping as need be on the input tga header since the tga
- is in little endian but the host could just as well be big endian. i didnt
- bother using bswap macros or such stuff from system headers as nothing in
- POSIX dictates byte swapping functionality.
- Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
- commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Dec 18 03:23:25 2007 -0500
- cleanup easylogo
- - make the Makefile not suck
- - include proper headers for prototypes
- - fix obvious broken handling of strchr() when handling '.' in filenames
- Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
- commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
- Author: raptorbrino@aim.com <raptorbrino@aim.com>
- Date: Thu Dec 13 21:23:28 2007 -0500
- Fix build problems under Cygwin
- This patch allows u-boot to build without error in a cygwin
- environment. Cygwin does not define __u64 in it's
- include/asm/types.h file. The -idirafter flag in the u-boot
- build causes the inclusion of the cygwin types.h file as opposed
- to u-bot/include/asm/types.h file which does define __u64.
- Subsequently, sha1.c compile fails due to unknown symbol.
- Signed-off-by: Brian Miller <raptorbrino@netscape.net>
- commit 43ef1c381f9195504a2488f5cb909227eb97d475
- Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Date: Fri Nov 30 17:29:59 2007 +0100
- cmd_bmp: Add support for displaying gzip compressed bmps
- The existing code can show information about a gzip compressed BMP
- image, but can't actually display it.
- Therefore, move the decompression code out of bmp_info() and use it in
- bmp_display() as well in order to display a compressed BMP image.
- Also, clean things up a bit and fix a memory leak while we're at it.
- [hskinnemoen@atmel.com: a bit of refactoring]
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit d197ffd8172c6fdef38733424640a9a47295d6e9
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Nov 29 21:15:56 2007 +0100
- Fix and optimize MII operations on FEC (MPC8xx) controllers
- This patch fixes several issues at least on a MPC885 based system with two
- FEC interfaces used in MII mode.
- 1. PHY discovery should first read PHY_PHYIDR2 register and only then
- PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
- otherwise the values read are wrong. Also notice, that PHY discovery
- cannot work on MPC88x / MPC87x in setups with both FECs active at all
- in its present form, because for both interfaces the registers from FEC
- 1 are used to communicate over MII.
- 2. Remove code duplication for resetting the FEC by isolating it into a
- separate function.
- 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
- 4. Optimize mii_init() to only reset the FEC 1 controller once.
- 5. Fix a typo in mii_init() using index i instead of j thus potentially
- leading to unpredictable results.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Nov 20 13:14:20 2007 +0100
- Fix endianness conversions in rtl8169 driver
- It is unclear on what platforms this driver has been tested, since
- noone up to now defines CONFIG_RTL8169 in the board configuration
- header. Now it has been fixed for a big-endian mpc8241 based
- linkstation platform. This patch presents the necessary endianness
- conversion fixes.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Jan 3 10:51:15 2008 +0800
- Add Ctrl combo key support to usb keyboard driver.
- Ctrl combo key support is added, which is very useful to input Ctrl-C
- for interrupt current job.
- Also add usb_event_poll() calling to usb_kbd_testc(), which can get
- key input when tstc() is called.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 9 13:43:38 2008 +0100
- Coding Style clenaup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:13:11 2007 +0100
- Remove bit swapping in Xilinx Spartan bitfile loading
- This patch removes the unnecessary bit swapping when
- booting .bit files with the 'fpga loadb' command.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 437fc7327f0611f82937858f2d80e4cd61b40984
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:13:05 2007 +0100
- Fix MSB check in Xilinx Spartan slave serial mode
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 3bff4ffa33729a42645e328a21e8d16488872958
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:12:56 2007 +0100
- Add new Xilinx Spartan FPGA types
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:12:43 2007 +0100
- Add pre and post configuration callbacks for Spartan FPGAs
- This patch adds a post configuration callback for Spartan2/3 FPGAs.
- pre and post configuration callback are now optional and
- not called when the function pointer is set to NULL.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:12:34 2007 +0100
- Improve configuration of FPGA subsystem
- This patch removes the FPGA subsystem configuration through
- the CONFIG_FPGA bitmask configuration option.
- See README for the new options:
- CONFIG_FPGA,
- CONFIG_FPGA_<vendor>,
- CONFIG_FPGA_<family>
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 95c6bc7d4a3588b452baca610f8c795a83630477
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 16:55:17 2007 +0100
- Add Epson RX8025 RTC support
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 16:57:23 2007 +0100
- serial: Make default_serial_console() a weak function
- With this patch it is possible to reimplement default_serial_console()
- in board specific code. This will be done in the upcomming PMC440
- U-Boot port. This also allows the lwmon board maintainer to
- remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:14:47 2007 +0100
- add 'terminal program' functionality
- This patch adds a 'cu' like serial terminal command to u-boot
- using which you can access other serial ports from the system console.
- OpenMoko uses this in their Neo1973 phones to get access to the GSM
- Modem and GPS chip from the bootloader.
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:12:53 2007 +0100
- Re-introduce the 'nand read.oob' and 'nand write.oob' commands
- that used to exist with the legacy NAND code
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit f540c42d9564854b19ce9bbb70affe172529fe70
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:09:58 2007 +0100
- Fix building with CRAMFS but not JFFS2 support
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit 23d0baf967fecdaf1804f045f6339337c5607eec
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Dec 22 15:52:58 2007 +0100
- Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 23776ff292966a85d811126933830bed48211826
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Dec 11 10:53:12 2007 +0100
- ARM: support board-specific ethernet PHY init
- Add until the new phylib will be arrived
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Dec 8 16:34:08 2007 +0100
- IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Dec 9 11:01:10 2007 +0100
- Add missing file in gitignore and comments
- based on Linux source tree's .gitignore files
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 9 11:36:21 2008 +0100
- Coding Style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b2e2142c500c48a57f18f9dd30e66c13caea0971
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 9 10:38:58 2008 +0100
- POST: Execute SPR test after relocation
- On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
- self modifying code and this doesn't work with stack in d-cache, since
- I can't move the code from d-cache to i-cache. We move the SPR test to
- be executed a little later, after relocation. Then stack is located in
- SDRAM and this self-modifying code is no problem anymore.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 9 10:28:20 2008 +0100
- ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
- This patch configures the LWMON5 port to use d-cache as init-ram and
- the unused GPT0_COMP6 as POST WORD storage.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1754f50b710194f886b6f2831803d8960171a14d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 9 10:25:46 2008 +0100
- ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
- The privious 4xx POST implementation only supported storing the POST
- WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
- we need to store the POST WORD in some other non volatile location.
- This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
- a location.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 9 10:23:16 2008 +0100
- ppc4xx: Add 44x cache locking to better support init-ram in d-cache
- This patch adds support for locking the init-ram/stack in d-cache,
- so that other regions may use d-cache as well
- Note, that this current implementation locks exactly 4k of d-cache,
- so please make sure that you don't define a bigger init-ram area. Take
- a look at the lwmon5 440EPx implementation as a reference.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0ddb89601a8d29e808db450366752ffdc6267c53
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 9 10:16:33 2008 +0100
- Fix memset bug in ext2fs_read_file()
- ext2fs_read_file() had the function arguments swapped.
- Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Tue Jan 5 08:17:15 1988 +0100
- Fix problems with usb storage devices on MPC5200 /TQM5200
- The MPC5200 OHCI controller operates in big endian, so
- CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jan 8 22:58:27 2008 +0100
- Fix compile problem with new env code.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 64b3727b9779d86127cd576e392a987de5ebb9fd
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Tue Nov 27 10:23:20 2007 +0100
- tools: fix fw_printenv tool to compile again
- This patch updates the fw_printenv/fw_setenv userspace tool to include
- the correct MTD header in order to compile against current kernel
- headers. Backward compatibility is preserved by introducing an option
- MTD_VERSION which can be set to "old" for compilation using the old MTD
- headers. Along with this a number of warnings are fixed.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 15:40:09 2008 +0100
- ppc4xx: assign PCI interrupts on seuqoia boards
- Some operating systems rely on assigned PCI interrupts.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 15:50:49 2008 +0100
- ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
- This patch allows the use of 4xx interrupt vector number defines
- in board specific code outside cpu/ppc4xx.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 15:39:01 2008 +0100
- ppc4xx: Fix UIC2 vector number base
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 12:49:58 2008 +0100
- ppc4xx: Update PLB/PCI divider for PMC440 board
- This patch updates the PLB/PCI divider when running at
- 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 11:13:09 2008 +0100
- ppc4xx: Disable error message when no NAND chip is installed on PMC440
- Add CFG_NAND_QUIET_TEST option to disable error message when
- no NAND chip is installed on PMC440 boards.
- Disable a couple of config defines that are only used for NAND_U_BOOT.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jan 8 22:58:27 2008 +0100
- Fix compile problem with new env code.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6de66b35426312a21174a9bf0576a094e2904bea
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Tue Nov 27 10:23:20 2007 +0100
- tools: fix fw_printenv tool to compile again
- This patch updates the fw_printenv/fw_setenv userspace tool to include
- the correct MTD header in order to compile against current kernel
- headers. Backward compatibility is preserved by introducing an option
- MTD_VERSION which can be set to "old" for compilation using the old MTD
- headers. Along with this a number of warnings are fixed.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit ad3006fe7e84667021753b74247b0bafd97ba35f
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jan 7 23:47:32 2008 -0500
- LIBFDT: use memmove() instead of memcpy()
- This is partial patch from the DTC/libfdt
- commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Wed Nov 21 11:56:14 2007 +1100
- The patch also fixes one genuine bug caught by valgrind -
- _packblocks() in fdt_rw.c was using memcpy() where it should have been
- using memmove().
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit aec7135bc300e3340d18f203347ee00c5b5f68c0
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Dec 17 14:42:07 2007 +1100
- libfdt: Add more documentation (patch the seventh)
- This patch adds more documenting comments to libfdt.h. Specifically,
- these document the read/write functions (not including fdt_open_into()
- and fdt_pack(), for now).
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Dec 17 14:41:52 2007 +1100
- libfdt: Add more documentation (patch the sixth)
- This patch adds some more documenting comments to libfdt.h.
- Specifically this documents all the write-in-place functions.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Dec 29 22:45:27 2007 -0500
- Fine grained per property /chosen updating.
- Implement a suggestion by Scott Wood to make the /chosen handling fine
- grained. Don't overwrite pre-existing properties on a per-property basis,
- so if /chosen exists but a necessary /chosen/property doesn't, it gets
- created. If a /chosen property exists, it is NOT overwritten unless the
- "force" flag is true.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Jan 5 15:33:29 2008 -0500
- Improve the FDT help message.
- Add a note that "fdt copy" makes the new address active.
- Remove most of the extra hints at the end of the fdt help.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Jan 5 14:52:04 2008 -0500
- Support setting FDT properties with optional values.
- Fix a bug found and documented by Bartlomiej Sieka where the optional
- value on "fdt set <path> <prop> [<val>]" wasn't optional.
- => fdt mknode / testnode
- => fdt print /testnode
- testnode {
- };
- => fdt set /testnode testprop
- => fdt print /testnode
- testnode {
- testprop;
- };
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 22fb2246df91bfc840d87f0c5910818bad55577a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 11:56:30 2007 +0100
- Add fdt_find_and_setprop() to fdt_support.h
- fdt_find_and_setprop() is used by several 4xx boards and it's
- missing in the appropriate header. This patch eliminates a
- warning when building U-Boot for such boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 802b769bac17b0560d3535a42c502469ee190cd1
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 8 18:39:30 2008 +0100
- ppc4xx: Return 0 on success in 4xx ethernet driver
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6775c68683a53c7abc778774641aac6f833a2cbf
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 8 09:59:49 2008 -0600
- mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Dec 20 16:28:34 2007 -0600
- mpc83xx: rm remaining FLAT_TREE code
- ..in board pci.c files
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b3458d2cd55d01732e30a76d898afd99e871cd67
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Dec 20 15:57:28 2007 -0600
- mpc83xx: remove FLAT_TREE code
- need to rm it from pci code, too!
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5b8bc606c61456566af6912f818a153b6b06f242
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Dec 20 14:09:22 2007 -0600
- mpc83xx: convert to using do_fixup_*()
- convert to using simpler mpc85xx style fdt update code; streamline by
- eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
- the old school FLAT_TREE code from 83xx (since the sbc8349 was just
- converted over to using libfdt).
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Thu Dec 20 12:58:51 2007 -0500
- sbc8349: enable libfdt by default on WRS SBC8349 board.
- Make libfdt the default for the WRS SBC8349 board.
- Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
- done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Thu Dec 20 12:58:16 2007 -0500
- sbc8349: migrate board to libfdt
- This adds libfdt support code for the Wind River sbc8349 board.
- Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
- the other Freescale 83xx boards.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Thu Dec 20 12:56:19 2007 -0500
- sbc8349: Remove board specific ECC code
- ECC code is now shared for all 83xx boards, so remove board specific one.
- See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Dec 20 01:30:48 2007 -0600
- mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
- continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ccf21c311e68d48399eff1e72936052885f6e3f7
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Thu Dec 6 16:43:40 2007 +0100
- Add support CONFIG_UEC_ETH3 in MPC83xx
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit e6af9932d31171e35db880e7b2f29f903b1b7660
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 11:00:54 2007 -0600
- Remove CONFIG options related to OF that we dont use
- The MPC8360E MDS config defined:
- CONFIG_OF_HAS_BD_T
- CONFIG_OF_HAS_UBOOT_ENV
- Which we don't use or ever needed. This seems like copy-paste feature creep.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f602082b4b7ed4ee16432067cc67a0a24fedc715
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Dec 10 14:16:22 2007 -0600
- mpc83xx: supress compiler warning
- mpc8360emds.c: In function ‘ft_board_setup’:
- mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
- mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Nov 27 14:17:29 2007 -0600
- mpc83xx: fix remaining fdt_find_node_by_path references
- rename to fdt_path_offset
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 921d4b19ad1be704df58725485d9292dc0414adf
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Nov 19 12:30:09 2007 -0600
- mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
- Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
- This change guarantees that the environment will be located on the
- first flash sector after the U-Boot image.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Nov 9 14:28:08 2007 -0600
- mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
- u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
- properties in the device tree so the PHY gets configured for internal delay on
- RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:41:15 2007 +0800
- mpc83xx: update the CREDITS and MAINTAINERS
- update the CREDITS and MAINTAINERS.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit b21add4b42af7b767448251b599b91066a160e0d
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:40:21 2007 +0800
- mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
- Add the MAINTAINER and MAKEALL entries for mpc837xemds
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit f8900ce9094c462355eb792eea264ff16ac8fd16
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:38:53 2007 +0800
- mpc83xx: Add the MPC837xEMDS board readme
- Add the README.mpc837xemds to /doc
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:37:57 2007 +0800
- mpc83xx: Add the support of MPC837xEMDS board
- The MPC837xEMDS board support:
- * DDR2 400MHz hardcoded and SPD init
- * Local bus NOR Flash
- * I2C, UART, MII and RTC
- * eTSEC RGMII
- * PCI host
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 555da61702771fe0f76f3de23b4e7590f3704161
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:36:58 2007 +0800
- mpc83xx: Add the support of MPC8315E SoC
- The MPC8315E SoC including e300c3 core and new IP blocks,
- such as TDM, PCI Express and SATA controller.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 03051c3d35c9981ceaa059005660e699f3eacf1c
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:36:11 2007 +0800
- mpc83xx: Add the support of MPC837x SoC
- The MPC837x SoC including e300c4 core and new IP blocks,
- such as SDHC, PCI Express and SATA controller.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed Nov 14 18:54:53 2007 +0300
- MPC8360E-MDS: configure and enable second UART
- Despite user manual, BCSR9.7 is negated (high) on HRST, so
- UART2 is disabled. Fix that and configure QE pins properly.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit b2893e1fcb28fad8c8b317104df8cee0142c7631
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Nov 5 09:34:06 2007 -0600
- 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
- Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
- currently-defined 83xx boards. This change guarantees that the environment
- will be located on the first flash sector after the U-Boot image.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e05329516a13616b53240cd85b739217c2bf87f1
- Author: Larry Johnson <lrj@acm.org>
- Date: Fri Jan 4 13:27:02 2008 -0500
- ppc4xx: Remove weak binding from common Denali data-eye search code
- Now that there are no board-specific versions of
- "denali_core_search_data_eye()", the weak binding on the common version
- can be removed.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 5ba576c01602fd328800a427964c36a0a05c5dce
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 09:13:46 2008 +0100
- ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 09:12:41 2008 +0100
- ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
- On Katmai the complete auto-calibration somehow doesn't seem to
- produce the best results, meaning optimal values for RQFD/RFFD.
- This was discovered by GDA using a high bandwidth scope,
- analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
- so now on Katmai "only" RFFD is auto-calibrated.
- This patch also adds RDCC calibration as mentioned on page 7 of
- the AMCC PowerPC440SP/SPe DDR2 application note:
- "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 49db47b8ae6afff2b898be312948ff501357dc80
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Jan 2 16:48:42 2008 +0100
- ppc4xx: Remove sdram.h from PMC440 board
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Jan 2 16:48:34 2008 +0100
- ppc4xx: use common denali core defines and data eye search code for PMC440
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Jan 2 12:05:14 2008 +0100
- ppc4xx: More cleanup for esd's LCD code
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 4 12:00:01 2008 +0100
- ppc4xx: Fix Sequoia NAND booting target
- The Sequoia NAND booting target now uses the recently extracted
- cpu/ppc4xx/denali_data_eye.c file too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
- Author: Lawrence R. Johnson <lrj@acm.org>
- Date: Thu Jan 3 15:02:02 2008 -0500
- ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
- Author: Lawrence R. Johnson <lrj@acm.org>
- Date: Fri Jan 4 02:11:56 2008 -0500
- ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
- Note: this patch changes the configuration of some GPIO registers:
- Register Old Value New Value
- --------------- ---------- ----------
- DCR GPIO0_TCR 0x0000000F 0x0000F0CF
- DCR GPIO0_TSRH 0x55005000 0x00000000
- DCR GPIO1_TCR 0xC2000000 0xE2000000
- DCR GPIO1_TSRL 0x0C000000 0x00200000
- DCR GPIO1_ISR2L 0x00050000 0x00110000
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 5ab884b254ca2e707ab50545cd705f30108cf491
- Author: Lawrence R. Johnson <lrj@acm.org>
- Date: Thu Jan 3 18:54:00 2008 -0500
- ppc4xx: Add functionality to GPIO support
- This patch makes two additions to GPIO support:
- First, it adds function gpio_read_in_bit() to read the a bit from the
- GPIO Input Register (GPIOx_IR) in the same way that function
- gpio_read_out_bit() reads a bit from the GPIO Output Register
- (GPIOx_OR).
- Second, it modifies function gpio_set_chip_configuration() to provide
- an additional option for configuring the GPIO from the
- "CFG_4xx_GPIO_TABLE".
- According to the 440EPx User's Manual, when an alternate output is used,
- the three-state control is configured in one of two ways, depending on
- the particular output. The first option is to select the corresponding
- alternate three-state control in the GPIOx_TRSH/L registers. The second
- option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
- the GPIOx_TRSH/L registers, and set the corresponding bit in the
- GPIOx_TCR register to enable the output. For example, the Manual
- specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
- the alternate three-state control (first option), and specifies
- configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
- enabled in the GPIOx_TCR register (second option).
- Currently, gpio_set_chip_configuration() configures all alternate signal
- outputs to use the first option. This patch allow the second option to
- be selected by setting the "out_val" element in the table entry to
- "GPIO_OUT_1". The first option is used when the "out_val" element is
- set to "GPIO_OUT_0". Because "out_val" is not currently used when an
- alternate signal is selected, and because all current GPIO tables set
- "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
- not change any existing configurations.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 196404cdc1de495d6182e84731c200fc5748df15
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sun Dec 30 01:01:54 2007 -0500
- PPC4xx: Remove sdram.h from board/lwmon5
- These definitions are now in "include/ppc440.h".
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sun Dec 30 01:01:32 2007 -0500
- PPC4xx: Use common code for LWMON5 board SDRAM support
- This patch also modifies the functionality of the code so that the data-eye
- search is now done with with the cache disabled.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 62cc3951ab72135d9c101f1845b794e63a0fa189
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sun Dec 30 01:01:14 2007 -0500
- PPC4xx: Remove sdram.h from board/amcc/sequoia
- These definitions are now in "include/ppc440.h".
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sun Dec 30 01:00:50 2007 -0500
- PPC4xx: Use common code for Sequoia board SDRAM support
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 8b0c5c127690335758100c25eaec2b84db97c101
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 16:58:41 2007 +0100
- net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
- When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
- networking stack does not automatically switch to
- another interface. This patch does not touch the default
- behavior.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
- Author: Upakul Barkakaty <upakul@gmail.com>
- Date: Thu Nov 29 12:16:13 2007 +0530
- NET: Proper return code handling in eth_init() function in file eth.c
- This patch modifies the return code handling in the eth_init()
- function, to be compatible with the handling of the return codes in
- the other network stack files. It now returns a 0 on Success and -1 on
- error.
- Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 5ca2d0953e4579a80810966cca2077e20d912c97
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Mon Nov 19 20:27:04 2007 +0900
- net/eth.c: Fix env_enetaddr signed overflow
- Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
- warned as below:
- U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
- DRAM: 256 MB
- Flash: 32 MB
- In: serial
- Out: serial
- Err: serial
- Net: NEC-Candy
- Warning: NEC-Candy MAC addresses don't match:
- Address in SROM is 00:00:4C:80:92:A2
- Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
- This patch changes env_enetaddr type from `char' to `unsigned char'.
- Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit f85b60710571b37293d2233933b76e2aa3db5635
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Thu Dec 27 18:19:02 2007 +0100
- Introduce new eth_receive routine
- The purpose of this routine is receiving a single network frame, outside of
- U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
- U-Boot will let them utilise networking facilities. For sending a raw frame
- the already existing eth_send() can be used.
- The direct consumer of this routine is the newly introduced API layer for
- external applications (enabled with CONFIG_API).
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 5c740711f0ea5b51414b341b71597c4a0751be74
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jan 3 10:41:04 2008 -0600
- 8610: Move include of config.h earlier.
- Include config.h earlier in the set of #includes
- so as to avoid a incidental and duplicate definition
- of CFG_CACHELINE_SIZE.
- Signed-off-by: Jon Loeliger
- commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Dec 4 10:53:34 2007 -0600
- Don't slam #undef DEBUG in the 8641HPCN config file.
- Doing so prevents it from being individually set
- and useful in other files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Nov 28 14:47:18 2007 -0600
- Convert MPC8641HPCN to use libfdt.
- Assumes the presence of the aliases node in the DTS to
- locate the ethernet, pci and serial nodes for fixups.
- Use consistent fdtaddr and fdtfile in environment variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ce37422d0002e10490e268392e0c4e3028e52cec
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 2 14:06:26 2008 +0100
- cfi_flash: Fix bug in flash_isset() to use correct 32bit function
- This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
- flash chips connected to a 32bit wide port.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 2 15:58:44 2008 +0100
- Fix compile problem introduced by "cleanup" commit 3dfd708c
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 2 15:54:45 2008 +0100
- Make scripts and Makefiles POSIX compliant
- The bash builtin versions of the "test" (resp. "[") command allow
- using "==" for string comparisons, but POSIX compatible implemen-
- tations (like /usr/bin/test) insist on using "=" only. On such systems
- you will see:
- $ /usr/bin/test a == a && echo OK
- /usr/bin/test: ==: binary operator expected
- This patch fixes Makefiles and scripts to use POSIX style.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 2 14:05:37 2008 +0100
- cfi_flash: Fix bug in flash_isset() to use correct 32bit function
- This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
- flash chips connected to a 32bit wide port.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 2 12:38:43 2008 +0100
- Minor coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e174ac34adf5d5653df12bc3cf19c52063a71269
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 28 17:29:56 2007 +0100
- ppc4xx: Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:07:24 2007 +0100
- ppc4xx: Complete PMC440 board support
- This patch brings the PMC440 board configuration file.
- Finally it enables the PMC440 board support.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 407843a582560fc5231299561ab3c2b6b6cd3397
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:07:18 2007 +0100
- ppc4xx: Add FPGA support and BSP commands for PMC440 boards
- This patch adds some BSP commands and FPGA booting support
- for esd's PMC440 boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:07:14 2007 +0100
- ppc4xx: Add initial esd PMC440 board files
- This patch adds the first files for the new esd PMC440 boards.
- The next two patches will complete the PMC440 board support.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:10:36 2007 +0100
- ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
- - add EEPROM write protection for esd PLU405 boards.
- - initialize NAND GPIOs
- - use correct io accessors
- - cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 77660c4b59055d621d2a8595bd4c18bb277268fc
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:10:44 2007 +0100
- ppc4xx: use correct io accessors for esd's LCD code
- This patch fixes esd's LCD dectection code to work correctly with
- newer gcc versions.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:10:42 2007 +0100
- ppc4xx: Maintenance patch for VOH405 boards
- - add EEPROM write protection
- - initialize NAND GPIOs
- - use correct io accessors
- - slow down I2C clock to 100kHz
- - enable ext. I2C bus
- - cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c05569066dbcba3fdf36d4d1943df265dc316a86
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 28 16:08:08 2007 +0100
- ppc4xx: Enable 405EP PCI arbiter per default on all boards
- In an attmemt to clean up the 4xx start.S file, I removed the enabling
- of the internal 405EP PCI arbiter. This is needed for multiple other
- 405EP platforms, like most of the esd 405EP. Now the internal PCI
- arbiter is enabled again per default as it has been before.
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 28 15:53:46 2007 +0100
- ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 28 06:06:04 2007 +0100
- ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
- Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
- platforms mentioned above.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b568fd25574181a3b12ae3d66b2913903442cb83
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:03:46 2007 +0100
- Remove CPCI440 board
- This board never left prototyping state and it
- became a millstone round my neck. So remove it.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c591dffe0cbacd896ccbad06011fe6d6afa080da
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Dec 27 11:28:51 2007 -0500
- Add support for Korat PPC440EPx board
- These patches add support for the PPC440EPx-based "Korat" board to
- U-Boot. They are based primarily on support for the Sequoia board.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:16:25 2007 -0500
- Add configuration file for Korat board
- This patch supplies the configuration file for the Korat PPC440EPx-
- processor board.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:16:11 2007 -0500
- Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit aba19604d848b2838cfb9ebe818909e6a216058e
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Dec 27 10:54:48 2007 -0500
- Add 440EPx DDR2 SPD DIMM support
- This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
- controller. It should also work on the 440GRx. It is based on the DDR2
- SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
- This code has been tested on prototype Korat boards with three Kingston
- DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
- (two ranks). The Korat board has a single DIMM socket, but support has
- been provided (though not tested) for boards with two DIMM sockets.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:15:30 2007 -0500
- Copy 440EPx/GRx SDRAM data-eye search to common directory
- This patch creates a non-board-specific file for performing the SDRAM
- data-eye search. It also adds ECC error checking to the test of valid
- data on readback when ECC is enabled.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit c46f53333b22b1f9098676bea8884fc7db820cf3
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:15:13 2007 -0500
- Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
- This patch adds the Denali SDRAM controller definitions to "ppc440.h".
- It also fixes two typos in the definitions, so the board-specific
- "sdram.h" files containing these definitions are also fixed to avoid
- compiler warnings.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit c348578bf612d0c56d8d376d23cae16defbd86af
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Dec 27 10:50:55 2007 -0500
- Add Ethernet 1000BASE-X support for PPC4xx
- This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
- is defined, the PHY will advertise it's capabilities for autonegotiation
- based on the capabilities shown in the PHY's status registers, including
- 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
- advertise hard-coded capabilities, as before.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Dec 27 09:52:17 2007 -0500
- Add driver for National Semiconductor LM73 temperature sensor
- This driver is based on the driver for the LM75.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 12618278688ea9b3d76536960a5ad2e3790fac40
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:14:00 2007 -0500
- Add driver for STMicroelectronics M41T60 RTC
- This driver is based on the driver for the M41T11. In the intended
- application, the RTC will be powered by a large capacitor, rather than a
- battery. The driver therefore checks to see whether the RTC has lost
- power. The chip's OUT bit is normally reset from its power-up state. If
- the OUT bit is read as set, or if the date and time are not valid, then the
- RTC is assumed to have lost power, and its date and time are reset to
- 1900-01-01 00:00:00.
- Support for adjusting the speed of the clock to improve accuracy is
- provided through an environment variable.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit d3471173e14b7544bb60339eda8d3d3906694b0a
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:34:39 2007 -0500
- Use out_be32() and friends to access memory-mapped registers in sequoia.c
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit c68f59fe3ec16769f82b5fca7421983c336d3aac
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:34:20 2007 -0500
- Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:23:50 2007 -0500
- Cosmetic changes to ECC POST for AMCC Denali core
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 2e583d6c81034f80a267b89fa55498ae063ccef1
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Dec 26 20:20:19 2007 +0100
- ppc4xx: Fix compilation problem in 405 cache POST test
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Dec 22 12:20:09 2007 +0100
- ppc4xx: Move virtual address of POST cache test to bigger address
- On Sequoia & LWMON5 the virtual address of the POST cache test is now
- moved to a bigger address. This enables usage of more memory on those
- boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d91722102cf63f77a0148ed3f3d54a26d87575e9
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Dec 22 12:18:26 2007 +0100
- ppc4xx: Fix problem in 44x cache POST routine
- As repoted by Larry Johnson, running "diag run cache" caused a crash
- in U-Boot. This problem was introduced by a patch that removed the
- TLB entry for the cache test after the test has completed. Since this
- TLB was only setup once, a 2nd attempt to run this cache test
- failed with a crash. Now this TLB entry is created every time the
- routine is called.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b0265b576bb8fa9465f99e99c323768b562fadc2
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 21 07:51:29 2007 +0100
- ppc4xx: Update Makalu fdt support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Dec 19 09:05:40 2007 +0100
- ppc4xx: Add fdt support to AMCC Katmai eval board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 328a340392a5df9aaf00792be989df73e750859e
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Dec 18 08:44:51 2007 +0100
- ppc4xx: fdt: Cleanup setup of cpu node setup
- Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
- without using the absolute path to the cpu node. This makes it possible
- to use this U-Boot version with both versions of cpu-node naming
- "cpu@0" and the former "PowerPC,440EPx@0".
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Dec 17 17:26:21 2007 +0100
- ppc4xx: Fix lwmon5 compilation problem
- Now that the 440EPx ECC test is not board specific anymore
- remove this Makefile.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
- Author: Anatolij Gustschin <agustschin@t-online.de>
- Date: Wed Dec 5 17:43:20 2007 +0100
- Fix ppc4xx clear_bss() code
- ppc4xx clear_bss() fails if BSS segment size is not
- divisible by 4 without remainder. This patch provides
- fix for this problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Nov 30 18:35:11 2007 +0100
- PPC4xx: Minimal changes to add vxWorks support
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 052440b022ca8981d39b6f8c10d1aa6326f47480
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Fri Nov 23 13:09:18 2007 +0100
- ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
- When using dhcp/bootp the "netmask" environment variable is not
- set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
- desireable, so the following patch adds this this option to the board
- config.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Oct 27 12:48:15 2007 -0400
- Fix/enhance ECC POST for 440EPx/GRx
- This patch allows the ECC POST to be used for different boards with the
- PPC440 Denali SDRAM controller. Modifications include skipping the test
- if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
- to prevent timing errors.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Oct 27 12:48:05 2007 -0400
- PPC4xx: Move/rename ECC POST for 440EPx/GRx
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit c29d2d3680046d430022c55e50fcb27f5866517e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 14 11:20:33 2007 +0100
- ppc4xx: use correct io accessors for 4xx ethernet POST
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit ba79fde58a48c0a6ff8e2a96caba951594142203
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 14 11:19:56 2007 +0100
- ppc4xx: fix flush + invalidate_dcache_range arguments
- flush + invalidate_dcache_range() expect the start and stop+1 address.
- So the stop address is the first address behind (!) the range.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 14 08:41:29 2007 +0100
- ppc4xx: fdt: use fdt_fixup_ethernet()
- By using aliases in the dts file, the ethernet node fixup is
- much easier with the recently added functions.
- Please note that the dts file needs the aliases for this to work.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 136288847e3b04f2ff357a067ad45e10afa0a24c
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Dec 13 14:52:53 2007 +0100
- ppc4xx: Bring 4xx fdt support up-to-date
- This patch update the 4xx fdt support. It enabled fdt booting
- on the AMCC Kilauea and Sequoia for now. More can follow later
- quite easily.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Dec 27 07:50:54 2007 +0100
- cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
- The check for an sufficiently erased destination was missing in the
- buffered write function of the cfi flash driver (when
- CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
- writing to such a region will fail with the currect error message.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Nov 12 10:56:17 2007 +0100
- Some configuration updates for the TQM5200 based TB5200 board:
- - enable command line history
- - increase malloc space (because of bigger flash sectors)
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit e318d9e9021a0af7508171f84ed09d0e79f0284e
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Thu Sep 27 11:10:08 2007 +0200
- TQM8xx: use the CFI flash driver on all TQM8xx boards
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 11d9eec479b470eab9242ab937fca70a876d9376
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Sep 26 17:55:56 2007 +0200
- TQM885D: adjust for doubled flash sector size + some minor fixes
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
- Author: Jens Gehrlein <jens.gehrlein@tqs.de>
- Date: Wed Sep 26 17:55:54 2007 +0200
- TQM885D: Exchanged SDRAM timing by a more relaxed timing.
- CAS-Latency=2, Write Recovery Time tWR=2
- The max. supported bus frequency is 66 MHz. Therefore, changed
- threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit b988b8cd443989be65161888eea0127ad03f846f
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Sep 26 17:55:56 2007 +0200
- TQM885D: use calculated cpuclk instead of measuring it
- On the TQM885D the measurement of cpuclk with the PIT reference
- timer ist not necessary. Since all module variants use the same
- external 10 MHz oscillator, the cpuclk only depends on the PLL
- configuration - which is readable by software.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 492c7049869348d31168de8dad89651315e468e0
- Author: Jens Gehrlein <jens.gehrlein@tqs.de>
- Date: Thu Sep 27 14:54:46 2007 +0200
- TQM885D: fix SDRAM refresh
- At 133 MHz the current SDRAM refresh rate is too fast
- (measured 4 * 1.17 us).
- CFG_MAMR_PTA changes from 39 to 128. This result
- in a refresh rate of 4 * 7.8 us at the default clock
- 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
- This is a compromise until a new method is found to
- adjust the refresh rate.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit dabad4b9bc46908e301f73ce76b38b23626a96e9
- Author: Jens Gehrlein <jens.gehrlein@tqs.de>
- Date: Thu Sep 27 14:54:46 2007 +0200
- TQM860M: Support for 10col SDRAMs, max. 128 MiB
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 61fb15c516fef5631e305f1976d7b3a679725856
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Dec 27 01:52:50 2007 +0100
- Fix coding style issues; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 467bcee11fe26ad422f2de971aa70866079870f2
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Dec 14 15:36:18 2007 +0100
- cfi_flash: Add manufacturer-specific fixups
- Run fixups based on the JEDEC manufacturer ID independent of the
- command set ID.
- This changes current behaviour: Previously, geometry reversal for AMD
- chips were done based on the command set ID, while they are now done
- based on the JEDEC manufacturer and device ID.
- Also add fixup for top-boot Atmel chips. A fixup is needed for
- AT49BV6416(T) too, but since u-boot currently only reads the low byte
- of the device ID, there's no way to tell it apart from AT49BV642D,
- which should not have this fixup. Since AT49BV642D support is
- necessary to get ATNGW100 board support into mainline, I've commented
- out the fixup for now.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Dec 14 15:36:17 2007 +0100
- cfi_flash: Add cmdset-specific init functions
- Move things like reading JEDEC IDs and fixing up geometry reversal
- into separate functions. The geometry reversal fixup is now performed
- by altering the qry structure directly, which makes the sector init
- code slightly cleaner.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit e23741f4a6d8047520ef0d4971762749b3587d32
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Dec 14 15:36:16 2007 +0100
- cfi_flash: Read whole QRY structure in one go
- Read out the whole CFI Standard Query structure after successful cfi
- identification. This allows subsequent code to access this information
- directly without having to go through flash_read_uchar() and friends.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Dec 17 11:02:44 2007 +0100
- AVR32: Fix logic inversion in disable_interrupts()
- disable_interrupts() should return nonzero if interrupts were
- _enabled_ before, not disabled.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit acac475212cbedb17b321a363a1c878e2b47b37f
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Dec 14 16:51:22 2007 +0100
- AVR32: Enable interrupts at bootup
- The timer code depends on the timer interrupt to keep track of the
- upper 32 bits of the cycle counter. This obviously doesn't work when
- interrupts are disabled the whole time.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9570bcd87f4db255514f43b6701746c412f8fef0
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 15 10:03:45 2007 +0100
- AVR32: Fix wrong pin setup for USART3
- As reported by Gerhard Berghofer:
- in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
- instead of PB18 and PB19.
- which is obviously correct. There's currently no code that uses
- USART3, but custom boards may run into problems.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 1 12:44:20 2007 +0100
- README: Remove ATSTK1000 daughterboard list
- As noted by Kim Phillips, these lists tend to become out of date.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit c81cbbad21cb0ae983e2e796211202234cdc8be2
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Tue Oct 30 14:56:36 2007 +0100
- Add ATSTK100[234] to MAINTAINERS
- Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
- "mother". Also update the entry for ATSTK1000 to be not only about the
- AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 64ff2357b1727213803591813dbc779c924bf772
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Oct 29 13:02:54 2007 +0100
- AVR32: Add support for the ATSTK1004 board
- ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
- which is a derivative of AT32AP7000.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 667568db157f374b85abd7e03596ddd1f0b25681
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Oct 29 13:02:54 2007 +0100
- AVR32: Add support for the ATSTK1003 board
- ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
- which is a derivative of AT32AP7000.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 5fee84a794a51ec830548cda485a770efb018b92
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Oct 29 13:23:33 2007 +0100
- AVR32: Make some AT32AP700x peripherals optional
- Add a chip-features file providing definitions of the form
- AT32AP700x_CHIP_HAS_<peripheral>
- to indicate the availability of the given peripheral on the currently
- selected chip.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 36f28f8a9605ee5dcfa330482cfc62171261af97
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Oct 29 13:09:56 2007 +0100
- AVR32: Rename at32ap7000 -> at32ap700x
- The SoC-specific code for all the AT32AP700x CPUs is practically
- identical; the only difference is that some chips have less features
- than others. By doing this rename, we can add support for the AP7000
- derivatives simply by making some features conditional.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Jun 29 18:22:34 2007 +0200
- atmel_mci: Show SR when block read fails
- Show controller status as well as card status when an error occurs
- during block read.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Dec 13 14:52:53 2007 +0100
- ppc4xx: Bring 4xx fdt support up-to-date
- This patch update the 4xx fdt support. It enabled fdt booting
- on the AMCC Kilauea and Sequoia for now. More can follow later
- quite easily.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 12d30aa79779c2aa7a998bbae4c075f822a53004
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:34 2007 +0100
- cfi_flash: Use map_physmem() and unmap_physmem()
- Use map_physmem() and unmap_physmem() to convert from physical to
- virtual addresses. This gives the arch a chance to provide an uncached
- mapping for flash accesses.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 4d7d6936eb29af7cca330937808312aa5f61454d
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:33 2007 +0100
- Introduce map_physmem() and unmap_physmem()
- map_physmem() returns a virtual address which can be used to access a
- given physical address without involving the cache. unmap_physmem()
- should be called when the virtual address returned by map_physmem() is
- no longer needed.
- This patch adds a stub implementation which simply returns the
- physical address cast to a uchar * for all architectures except AVR32,
- which converts the physical address to an uncached virtual mapping.
- unmap_physmem() is a no-op on all architectures, but if any
- architecture needs to do such mappings through the TLB, this is the
- hook where those TLB entries can be invalidated.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:32 2007 +0100
- cfi_flash: Introduce read and write accessors
- Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
- them to access the flash memory. This makes it clearer when the flash
- is actually being accessed; merely dereferencing a volatile pointer
- looks just like any other kind of access.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 812711ce6b3a386125dcf0d6a59588e461abbb87
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:31 2007 +0100
- Implement __raw_{read,write}[bwl] on all architectures
- This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
- m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
- from Linux.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Oct 6 18:55:36 2007 +0200
- cfi_flash: Reorder functions and eliminate extra prototypes
- Reorder the functions in cfi_flash.c so that each function only uses
- functions that have been defined before it. This allows the static
- prototype declarations near the top to be eliminated and might allow
- gcc to do a better job inlining functions.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:29 2007 +0100
- cfi_flash: Make some needlessly global functions static
- Make functions not declared in any header file static.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 7e5b9b471518c5652febc68ba62b432193d6abf4
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:28 2007 +0100
- cfi_flash: Break long lines
- This patch tries to keep all lines in the cfi_flash driver below 80
- columns. There are a few lines left which don't fit this requirement
- because I couldn't find any trivial way to break them (i.e. it would
- take some restructuring, which I intend to do in a later patch.)
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Dec 11 13:59:57 2007 +0100
- CFI: synchronize command offsets with Linux CFI driver
- Fixes non-working CFI Flash on the Inka4x0 board.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Dec 7 12:17:34 2007 -0600
- Handle MPC85xx PCIe reset errata (PCI-Ex 38)
- On the MPC85xx boards that have PCIe enable the PCIe errata fix.
- (MPC8544DS, MPC8548CDS, MPC8568MDS).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Dec 7 12:04:30 2007 -0600
- Update Freescale MPC85xx ADS/CDS/MDS board config
- * Enabled CONFIG_CMD_ELF
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d435793229ce29a42797c1edc39f5b34f987f91a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Dec 7 04:59:26 2007 -0600
- Handle Asynchronous DDR clock on 85xx
- The MPC8572 introduces the concept of an asynchronous DDR clock with
- regards to the platform clock.
- Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
- mode.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:34:28 2007 -0600
- Update Freescale MPC85xx ADS/CDS/MDS board config
- * Removed some misc environment setup
- * Enabled CONFIG_CMDLINE_EDITING
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:47:44 2007 -0600
- Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:16:18 2007 -0600
- Move the MPC8540 ADS board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 870ceac5b3a3486c109396e005af81ae762b5710
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:14:50 2007 -0600
- Move the MPC8560 ADS board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:13:47 2007 -0600
- Move the MPC8568 MDS board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a853d56c59b33415304531443633808736acfc6e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 02:18:59 2007 -0600
- Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
- We already had defines for LAWAR_TRGT_IF_* that we should use
- rather than creating new ones. Also, added some missing defines for
- PCIE targets.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 04db400892da37b76a585e332a0c137954ad2015
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 02:10:09 2007 -0600
- Stop using immap_t on 85xx
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_*_ADDR as the base of the registers
- instead of getting it via &immap.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2714223f8e04ab3e4133ff65872eef366d90bfea
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 01:23:09 2007 -0600
- Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c480861bf000156e6a3e932c258db59ff2212dd3
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 01:06:19 2007 -0600
- Update MPC8568 MDS to use libfdt
- Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Wed Nov 14 15:52:06 2007 -0500
- Add PCI Express support on MPC8568MDS
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b90d25497625b90ffa3f2911a0895ca237556ff5
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 00:11:44 2007 -0600
- Update MPC85xx CDS to use libfdt
- Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 28 22:54:27 2007 -0600
- Update MPC8540 ADS to use libfdt
- Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5ce715802f6c50dc78b3405b92f184b1e3710519
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 28 22:40:31 2007 -0600
- Update MPC8560 ADS to use libfdt
- Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 28 00:36:33 2007 -0600
- Stop using immap_t for cpm offset on 85xx
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
- instead of getting it via &immap->im_cpm.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Nov 27 23:25:02 2007 -0600
- Stop using immap_t for guts offset on 85xx
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
- instead of getting it via &immap->im_gur.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 50c03c8cf494d91cdec39670d95337c743e16ec9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Nov 27 22:42:34 2007 -0600
- Update MPC8544 DS config
- * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
- * Removed some misc environment setup
- * Moved to using fdtfile & fdtaddr as fdt env var names
- * Enabled CONFIG_CMDLINE_EDITING
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit addce57e2e4c49e77ffb2020a84690713bb18b47
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 17:12:24 2007 -0600
- Update MPC8544DS to use libfdt
- Updated the MPC8544DS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 00:15:30 2007 -0600
- Add libfdt based ft_cpu_setup for mpc85xx
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Dec 11 13:38:19 2007 +0100
- ppc4xx: Correct GPIO offset in gpio_config()
- Thanks to Gary Jennejohn for pointing this out.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8809a2713b1ceaf3da55d9d785470294f15de06a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Dec 11 11:46:01 2007 +0100
- rtc: Fix merging problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Dec 8 14:47:34 2007 +0100
- ppc4xx: 405EX: Correctly enable USB pins
- This patch selects the USB data pins in the 405EX GPIO and MFC (multi
- function control) registers. This is done for the AMCC Kilauea and
- Makalu eval boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Dec 8 08:25:09 2007 +0100
- CFI: Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Fri Dec 7 23:35:02 2007 +0100
- CFI: support JEDEC flash roms in CFI-flash framework
- The following patch adds support for non-CFI flash ROMS, by hooking into the
- CFI flash code and using most of its code, as recently discussed here in the
- thread "Mixing CFI and non-CFI flashs".
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c01b17dd856fa120b2970f50d9598546a4927ec3
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Nov 28 21:24:50 2007 -0500
- Conditionally compile fdt_fixup_ethernet()
- Fix compiler warnings: On boards that don't have ethernets defined,
- don't compile fdt_fixup_ethernet().
- commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Nov 27 21:59:46 2007 -0600
- Convert boards that set memory node to use fdt_fixup_memory()
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 17:06:15 2007 -0600
- Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
- We use a combination of the serialN alias and CONFIG_CONS_INDEX to
- determine which serial alias we should set linux,stdout-path to.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 14:57:45 2007 -0600
- Add common memory fixup function
- Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 11:19:12 2007 -0600
- Conditionally compile fdt_support.c
- Modify common/Makefile to conditionally compile fdt_support.c based
- on CONFIG_OF_LIBFDT.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d88e7ba0980773479e1a64badb293116071b7ef0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 10:41:40 2007 -0600
- Fix build breakage due to libfdt import
- The IDS8247 got lost in the update and need an API update
- do to rename of functions in libfdt.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Nov 23 19:43:20 2007 -0500
- Add spaces around the = in the fdt print format.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Fri Dec 7 01:25:38 2007 +0900
- sh: Moved driver of the SuperH dependence
- The composition of the directory in the drivers/ changed.
- I moved SuperH serial driver and marubun PCMCIA driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Dec 6 10:21:19 2007 +0100
- Release v1.3.1
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Dec 6 10:21:03 2007 +0100
- ADS5121 Board: fix compile problem.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a27044b14a9e93678a82d7b35f202b93e7687abc
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Dec 6 05:58:43 2007 +0100
- ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
- This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
- setting the FIXD bit in the SDR0_MFR register. Here a description of the
- symptoms:
- Problem Description
- ------------------------------
- If a DMA is performed between memory and PCI with the DMA 1 Controller
- using prefetch, and as a result uses a special purpose buffer selected by
- the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
- the first part of the transfer sequence is performed twice. The
- PPC440SPe PCI Controller requests more data than was needed such that in
- the case of enforce memory protection, a host CPU exception can occur.
- No data is corrupted, because data transfer is stopped in the PCI
- Controller. Prefetch enable is specified by setting DMA Configuration
- Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
- Behavior that may be observed in a running system
- ---------------------------------------------------------------------------
- 1. DMA performance is decreased because of the double access on the PCI bus
- interface.
- 2. If an illegal access to some address on the PCI bus is detected at the
- system level, a machine check or similar system error may occur.
- Workarounds Available
- ----------------------------------
- 1. Do not program prefetch. Note that a prefetch command cannot be programmed
- without selecting a special purpose buffer.
- 2. To avoid crossing a physical boundary of the PCI slave device, add 512
- bytes of address to the PCI address range.
- This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
- from AMCC and slighly changed.
- Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Dec 4 16:29:48 2007 +0100
- ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Dec 3 00:15:28 2007 +0100
- Prepare for 1.3.1-rc1
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e15e33433e7c05111968dc9b434a52fd42cbd221
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 30 07:15:41 2007 +0100
- ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
- This manual PCIe reset triggering solves the problem seen with the
- Intel EPRO/1000 card, which was not detected (link not established)
- upon power-up reset.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 260eea5676ca46903a335686cc020b29c4ca46fe
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Nov 29 01:21:54 2007 +0900
- sh: Add SuperH boards maintainer to MAINTAINERS file
- Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Nov 29 00:13:04 2007 +0900
- sh: Add ms7750se support in MAKEALL
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c7144373427a178332bf9754131c8c34c52c200a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 27 09:44:53 2007 +0100
- sh: Add sh3 and sh4 support in MAKEALL
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 130080874a3d28450098481a262c5f7c855e908d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Nov 25 02:51:17 2007 +0900
- sh: Add document for SuperH.
- This document is a summary of information concerning SuperH of U-Boot.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Nov 25 02:39:31 2007 +0900
- sh: Add marubun's pcmcia driver
- Marubun pcmcia is a chip for PCMCIA used with SuperH.
- Of course, this can be used even by other architectures.
- When use this driver, came to be able to use CompactFlash
- and Ethernet.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit febd86b969b975289ed948f1ac0eb9722da41ced
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Nov 25 02:32:13 2007 +0900
- sh: Update SuperH SCIF driver
- - Changed volatile unsigned to vu_.
- - Changed Makefile for kconfig.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 8be760903645af09871be50ad0a6f9ebb62b311d
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 27 11:57:35 2007 +0100
- ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
- After an error in the AMCC 405EX users manual now correctly configure
- IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
- usage.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Nov 26 19:18:21 2007 +0100
- Cleanup coding style; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 25 22:39:25 2007 +0100
- MAKEALL: add missing 512x boards in ppc
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a340c325e668ca7386c2276387681720be9c3757
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 25 18:45:47 2007 +0100
- Makefile : fix tags ctags etags with new drivers organization
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 26 15:06:14 2007 +0100
- ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
- As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
- operation.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ca1ce226287270bb01e25b8e3674c701f12edf19
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 26 15:01:45 2007 +0100
- ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 25 18:45:47 2007 +0100
- Makefile : fix tags ctags etags with new drivers organization
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 59829cc189378c142c13d2aa8d9a897d8bef3961
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 21:26:56 2007 +0100
- drivers/mtd : move mtd drivers to drivers/mtd
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 318c0b90431f2648552e5ade78833f42652ce859
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 21:17:55 2007 +0100
- drivers/misc : move misc drivers to drivers/misc
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 33daf5b7858807cb4ce4158c2c56524671c14c08
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 21:13:59 2007 +0100
- drivers/block : move block drivers to drivers/block
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0c698dcaa70275eb8814f665b545547cee013892
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 20:59:50 2007 +0100
- drivers/rtc : move rtc drivers to drivers/rtc
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f868cc5a50757d94f36c312395481cb0f187d9e6
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 20:14:44 2007 +0100
- drivers/hwmon : move hardware monitor drviers to drivers/hwmon
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 19:46:45 2007 +0100
- drivers/input : move input drivers to drivers/input
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e4558666293364fc3af1c1d9381ca933fa0f1275
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 19:40:11 2007 +0100
- drivers/usb : move usb drivers to drivers/usb
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 19:33:38 2007 +0100
- drivers/serial : move serial drivers to drivers/serial
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Nov 21 21:19:24 2007 +0100
- drivers/net : move net drivers to drivers/net
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 352d259130b349fe9593b8dada641bd78a9659e5
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 20 20:41:48 2007 +0100
- drivers/video : move video drivers to drivers/video
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 73646217186aa17afc8e305c5f06f06dd335eaad
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 20 20:33:09 2007 +0100
- drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 20 20:28:09 2007 +0100
- drivers/pci : move pci drivers to drivers/pci
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9162352817579840d7802da6d85872b3ca003c97
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Thu Nov 22 17:23:23 2007 -0500
- Fix fdt printing for updated libfdt
- Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 21 13:30:15 2007 -0600
- Add additional fdt fixup helper functions
- Added the following fdt fixup helpers:
- * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
- * do_fixup_by_compat{_u32} - Find matching nodes by compat
- The _u32 variants work the same only the property they are setting
- is know to be a 32-bit integer instead of a byte buffer.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 21 11:11:03 2007 -0600
- Add fdt_fixup_ethernet helper to set mac addresses
- Added a fixup helper that uses aliases to set mac addresses
- in the device tree based on the bd_t
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit dbaf07ce620aab249e3502b20a986234a6af1d3a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 21 14:07:46 2007 -0600
- Fix warnings from import of libfdt
- cmd_fdt.c: In function fdt_print:
- cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8d04f02f6224e6983f4812ea4da704950ec8539c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Oct 24 11:04:22 2007 -0500
- Update libfdt from device tree compiler (dtc)
- Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
- the device tree compiler (dtc) project.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e93becf80d732b64aef81b23e8b6ece02c40533d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Sat Nov 3 19:46:28 2007 -0500
- Move do_fixup* for libfdt into common code
- Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
- into common/fdt_support.c and renamed:
- do_fixup() -> do_fixup_by_path()
- do_fixup_u32() -> do_fixup_by_path_u32()
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f738b4a75998f42a7408defadc9baac7a31c92db
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Oct 25 16:15:07 2007 -0500
- Make no options to fdt print default to '/'
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Oct 24 10:21:57 2007 -0500
- Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
- Removed:
- fdt_node_is_compatible
- fdt_find_node_by_type
- fdt_find_compatible_node
- To ease merge of newer libfdt as we aren't using them anywhere at this time.
- Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
- reason.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 98e2867cc85409b919f862e6c16026461ec955df
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Wed Nov 21 09:19:37 2007 -0700
- [BUILD] Remove libraries when updating autoconf.mk
- Fix library problems caused by conditional compilation. Using
- autoconf.mk to decide which files to compile has caused a problem when
- changing configuration from one board to another without clearing out
- the library (*.a) files.
- It used to be that the linker was always passed the same list of .o
- files when building the .a files. However, that is not longer true
- with conditional compilation. Now, a different board config will have
- a different file list passed to the linker. The problem occurs when
- a library has already been built and the board config is changed.
- Since the linker will update instead of replace a preexisting library,
- then if the file list changes to remove some object files the old
- objects will still exist in the library.
- The solution is to remove all old library files when autoconf.mk is
- made.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 21 08:49:50 2007 -0600
- [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
- Modify libfdt/Makefile to conditionally compile the *.c files based
- on the board config.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4a43719a7738712811d822ca8125427b27a55cdc
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- [BUILD] conditionally compile common/cmd_*.c in common/Makefile
- Modify common/Makefile to conditionally compile the cmd_*.c files based
- on the board config.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- [BUILD] Generate include/autoconf.mk from board config files
- Use cpp and sed to postprocess config.h and import the defined values
- into include/autoconf.mk. autoconf.mk is then included by config.mk to
- give 'make' access to the board configuration.
- Doing this enables conditional compilation at the Makefile level instead
- of by wrapping every .c file with #ifdef/#endif wrappers.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 68b88999da87ab88e71e1306192905be3450198e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Nov 20 15:02:26 2007 -0600
- 8610HPCD: Enable the 8610 Display Interface Unit
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Nov 20 15:00:53 2007 -0600
- Move 8610 DIU interface structure definitions to header file.
- These two structures are still needed during the
- initialization and setup of the DIU hardware.
- So move them to the fsl_diu_fb.h file for now.
- Official "blah".
- Noticed-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 080c646dbf474a109c3f85718fb01ce042a38c45
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 20 20:14:18 2007 +0100
- drivers/i2c : move i2c drivers to drivers/i2c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9a337ddc154a10a26f117fd147b009abcdeba75a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Nov 19 22:20:24 2007 +0100
- Prepare for 1.3.0 release.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f30ad49b16bf998b03c1a5228b6c86369d61c258
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Mon Nov 19 10:02:13 2007 -0500
- Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
- CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit f8c320609366176b31104d9bf5e295232e1c7f1d
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Mon Nov 19 11:14:16 2007 +0900
- [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
- lowlevel_init.S: Assembler messages:
- lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
- Looking at codes, the `memtest' and `clearmem' are intentional mixed
- use of `global symbols' and `label' for debugging purpose. To make it
- build, just disable global-symbols-use for now. As a result `memtest'
- still remains as unused, but leave it be...
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Nov 19 12:59:14 2007 +0100
- Fix build problems with mp2usb board
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6bf4c686afca1e86e1c384d59218f914605713bf
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 18 18:36:11 2007 +0100
- s3c24x0: Fix usb_ohci.c missing in Makefile
- and usb_ohci.c warning differ in signedness
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6073f61e078da5ddb521b56256bcc36508589883
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 18 12:55:02 2007 +0100
- pb1x00 board: Fix u16 status declaration when PCMCIA is defined
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Nov 18 17:11:09 2007 +0100
- Fix compiler warnings for ARM systems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Nov 18 16:36:27 2007 +0100
- Fix compiler warnings for PPC systems. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 653811a3c2b35856bf12e196dcc8c4694e28e420
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Nov 18 14:44:44 2007 +0100
- ppc4xx: Correct 405EX PCIe UTL register mapping
- Map 4k mem space for UTL registers for each port.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 17 11:31:10 2007 +0100
- Fix warning differ in signedness in net/net.c and net/nfs.c
- commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Nov 17 20:42:45 2007 +0900
- gth2.c: Fix a warning on gth2 build.
- gth2.c: In function 'misc_init_r':
- gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 2309c130aa4c84b91bd874a41269c923eb61b555
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Nov 17 07:58:25 2007 +0100
- Fix warning differ in signedness in common/cmd_scsi.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9ea61b57968554eaf0f474ec7e088b17d367f474
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Nov 17 14:52:29 2007 +0100
- ppc4xx: Update AMCC Kilauea config file
- - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Nov 17 20:05:26 2007 +0900
- [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
- Current trick to pick up GNU assembler minor version does not work with the
- latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
- "(GNU Binutils) ".
- $ sde-as --version |grep "GNU assembler"
- GNU assembler 2.15.94 mipssde-6.02.02-20050602
- $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
- 2.15.94
- $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
- 15
- $
- $ mips-linux-as --version |grep "GNU assembler"
- GNU assembler (GNU Binutils) 2.18
- $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
- (GNU
- $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
- (no output)
- $
- As a result of above, you'll see many noises with such binutils:
- make -C cpu/mips/
- /bin/sh: line 0: [: : integer expression expected
- /bin/sh: line 0: [: : integer expression expected
- make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
- mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
- /bin/sh: line 0: [: : integer expression expected
- mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
- /bin/sh: line 0: [: : integer expression expected
- mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
- /bin/sh: line 0: [: : integer expression expected
- This patch simplifies the trick and makes it work with both versions of gas.
- I also replace an expensive `awk (or gawk)' with `cut'.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 16664f72850846e645616da1c0fa5afcd6d15f15
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Nov 17 20:05:26 2007 +0900
- [MIPS] Remove useless instructions for initializing $gp.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 03c031d5660ea946c39af6e2e16267da857c609f
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:27:06 2007 +0900
- [MIPS] MIPS 4K core: Coding style cleanups
- No logical changes.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Nov 17 20:05:20 2007 +0900
- [MIPS] gth2.c: Fix a warning on gth2 build.
- gth2.c: In function 'misc_init_r':
- gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 4fbd0741b2b6441da10be93e10267122581b7079
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:22:33 2007 +0900
- [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
- au1x00_eth.c: In function 'au1x00_miiphy_write':
- au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit f01320459736f156707425cf8112f98606301aa4
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:00:25 2007 +0900
- [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
- au1x00_eth.c: In function 'au1x00_enet_initialize':
- au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
- au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
- au1x00_eth.c:246: error: for each function it appears in.)
- au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
- au1x00_eth.c: In function 'au1x00_miiphy_write':
- au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
- make[1]: *** [au1x00_eth.o] Error 1
- Fixed by moving these two functions forward.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit b09258c5393edd1087c5f39ae68338f16b49f8b3
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:00:25 2007 +0900
- MAKEALL: Added missing pb1000 board
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:00:24 2007 +0900
- [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:00:24 2007 +0900
- [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 5947f6999aafa7c54c1390983d264a8463dfea8e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Nov 17 02:34:38 2007 +0100
- Update CHANGELOIG, prepare for -rc4
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
- Author: Luotao Fu <l.fu@pengutronix.de>
- Date: Wed Nov 14 18:58:33 2007 +0100
- Fix the i2c frequency and default address in rsdproto board
- rsdproto board support has wrong I2C frequency and wrong return value
- handling.
- Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
- commit 429c180edad038f91c989cb14b478228092e7054
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Nov 17 01:45:38 2007 +0100
- powerpc: Backout relocation changes for MPC5121, too.
- Apply Grant Likely's backout to MPC5121 code, too.
- Pointed out by Rafal Jaworowski <raj@semihalf.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Nov 13 22:18:33 2007 -0700
- powerpc: Backout relocation changes.
- Ugh. I *hate* to back this change out, but these compiler flags don't
- work for relocation on all versions of GCC. I've not been able to
- reproduce the environment in my setup (and hence, not been able to
- find a combination that *does* work), so I've got no choice but to go
- back to the old gcc flags and linker script.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 13 09:11:05 2007 +0100
- Fixed mips_io_port_base build errors.
- This patch has been sent on:
- - 29 Sep 2007
- Although mips_io_port_base is currently a part of IDE command, it is quite
- fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
- it to MIPS general part, and introduce `set_io_port_base()' from Linux.
- This patch is triggered by multiple definition of `mips_io_port_base' build
- error on gth2 (and tb0229 also needs this fix.)
- board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
- /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
- common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
- make: *** [u-boot] Error 1
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Nov 17 01:30:40 2007 +0100
- Fix a bug in the slave serial programming mode for the Xilinx
- Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
- the most significant bit was set, which did not work on any
- architecture where "char" defaulted to be an unsigned type.
- Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Nov 1 12:23:29 2007 -0500
- 86xx: Fix broken variable reference when #def DEBUGing.
- Sometimes you can't reference the DDR2 controller variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Oct 26 18:32:00 2007 +0800
- make 8610 board use pixis reset
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Mon Oct 29 19:26:21 2007 +0800
- Unify pixis_reset altbank across board families
- Basically, refactor the CFG_PIXIS_VBOOT_MASK values
- into the separate board config files.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 64bf555465c7926be13e1046ac0d0f05ac72829c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Nov 7 08:19:21 2007 +0100
- Fix warning: pointer targets in assignment differ in signedness
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7a60ee7c6248a958c5757d3660a1702723a2786d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Nov 7 08:19:19 2007 +0100
- Fix warning differ in signedness in common/cmd_ide.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 16 14:16:54 2007 +0100
- ppc4xx: Enable 405EX PCIe UTL register configuration
- Till now the UTL registers on 405EX were not initialized but left with
- their default values. This patch new initializes some of the UTL
- registers on 405EX.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 16 14:00:59 2007 +0100
- ppc4xx: Update AMCC Makalu for board rev 1.1
- This patch adds changes needed for Makalu rev 1.1:
- - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
- - Enable 2nd ethernet port EMAC1
- - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
- - Reset PCIe ports via GPIO upon bootup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4d4faae65e115e327425cd514c1a35146a85166b
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- Group PCI and PCMCIA drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5798f87dc10a496d79d3177b9f5a76488987fd35
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- Group block/flash drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit df58c81551700f058b44cacf55a7997fa63bfe0a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- Group USB drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Group i2c drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit ec00c76de0e5971273905998d62d6bb119324218
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Group console drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 754f230aa01b8c789fc31f8013c2487954073300
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Group network drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f0037c56b0d12cd46215124667b9f83d60ef9391
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Build: split COBJS value into multiple lines
- This change is in preparation for condtitionial compile support in the
- build system. By spliting them all into seperate lines now, subsequent
- patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
- be less invasive and easier to review
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Add .gitignore files
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 955413f35f054a82e40042f1dbcf501c6a05719b
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:27:52 2007 -0700
- Revert "Correct relocation fixup for mpc5xx"
- This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit e15633888a058aacb31a62d2cf1278e1e4c236ab
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:24:32 2007 -0700
- Revert "Correct fixup relocation for MPC5xxx"
- This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:21:04 2007 -0700
- Revert "Correct fixup relocation for mpc8220"
- This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 70922342369e5e39b286fe21e768a239ca07a514
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:20:57 2007 -0700
- Revert "Correct fixup relocation for mpc824x"
- This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:20:50 2007 -0700
- Revert "Correct fixup relocation for mpc8260"
- This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:20:43 2007 -0700
- Revert "Correct fixup relocation for mpc83xx"
- This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:20:25 2007 -0700
- Revert "[MPC512x] Correct fixup relocation"
- This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Nov 15 14:25:09 2007 +0100
- ppc4xx: Small AMCC Kilauea cleanup
- Remove not needed pci_target_init() function.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit aee747f19b460a0e9da20ff21e90fdaac1cec359
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Nov 15 14:23:55 2007 +0100
- ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
- - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
- - Cleanup of the 4xx GPIO functions
- - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Nov 15 14:20:08 2007 +0100
- ppc4xx: AMCC Taihu board config file cleanup
- This patch makes the AMCC Taihu a little more compatible to the other
- AMCC eval boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Nov 15 13:37:28 2007 +0100
- [INKA4x0] NG hardware: flash support
- Disabled and remove inka4x0 custom flash driver, use CFI flash
- driver instead.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 5fb6d7191e206cdde0e23140fd8111caed93a595
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Nov 15 13:29:55 2007 +0100
- [INKA4x0] NG hardware: SDRAM support
- Add support for three new DDR chips that may be present on a NG
- INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
- Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit f23cb34c367bb27585a4fdb8a75277370e7d0596
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Nov 15 13:24:43 2007 +0100
- [INKA4x0] NG hardware: platform code update
- - Cleanup compile warnings.
- - Add missing '\0' in default environment.
- - Increase CFG_MONITOR_LEN to 256 KiB.
- - Add required CFG_USE_PPCENV.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Thu Nov 15 08:58:00 2007 +0000
- Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
- Remove warnings re onenand_read() & write()
- commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Thu Nov 15 08:45:13 2007 +0000
- Correction patch
- commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Thu Sep 13 18:52:28 2007 +0800
- Enable ULi1575 Ethernet support in 8610HPCD config
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 13 08:18:20 2007 +0100
- ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 13 08:06:11 2007 +0100
- ppc4xx: Fix 405EX PCIe UTLSET register setup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1ce55151c85d068f70317a8d65c61058b891afb4
- Author: Heiko Schocher <hs@denx.de>
- Date: Tue Nov 13 07:50:29 2007 +0100
- [UC101] SRAM now with 2 MB working.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 2d14684341109a69616e4d6016cd61402d55086f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Nov 9 15:37:53 2007 +0100
- ppc4xx: Use generic usb-ohci driver for sequoia board
- This patch makes the sequoia board use the generic usb-ohci driver
- instead of cpu/ppc4xx/usb_ohci.c.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Nov 9 15:37:23 2007 +0100
- ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
- This patch disables the 44x d-cache on 'usb start' and
- reenables it on 'usb stop'. This should be seen as a
- temporary fix until the generic usb-ohci driver can
- life with d-cache enabled.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Nov 9 15:36:44 2007 +0100
- ppc4xx: Remove redundant code from 4xx network driver
- This patch removes some redundant code and decrements the end
- address of cache flush and invalidate by 1.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5ca9881aad8c413ac2a82868a5e3719178254502
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri Nov 9 15:24:26 2007 +0000
- Add apollon board support
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit b53313dbfc74525d85f1e7e0102f902d5c863beb
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 9 12:19:58 2007 +0100
- ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c7f69c340277935a6c19a956421852da944a365f
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 9 12:18:54 2007 +0100
- ppc4xx: Make output a little shorter on I2C bootrom detection
- Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
- already print a line with the information which I2C bootrom is
- used for bootstrap configuration. So we don't need this extra line
- with "I2C boot EEPROM en-/dis-abled".
- This patch also has a little code cleanup integrated.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8d737a28152ec12873f8544cca1fb39a49e5e693
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Nov 8 12:50:18 2007 -0600
- ColdFire: MCF5329 - Remove reset registers from CCM
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Nov 8 12:31:11 2007 -0600
- ColdFire: MCF5329 - Add Reset structure to immap_5329.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Nov 8 12:19:01 2007 -0600
- ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 225a24b5e062ad94627424508ae814f51dbe1a34
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Nov 7 18:00:54 2007 -0600
- ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 248c7c14835f34d5d910b45e5600050e58ca6cab
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Nov 7 17:56:15 2007 -0600
- ColdFire: MCF532x - Update do_reset() using core reset
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Nov 7 17:51:00 2007 -0600
- ColdFire: Update cpu flag for 4.2-xx compiler
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 070ba56115b4da63b46e974287fa4550d4023386
- Author: York Sun <yorksun@freescale.com>
- Date: Wed Oct 31 14:59:04 2007 -0500
- 8610: Add console frame buffer support to FSL 8610 DIU driver.
- Add cfb console support to FSL 8610 DIU driver.
- Inspect board version from PIXIS to obtain correct pixel format.
- Use #define CONFIG_VIDEO in config file to enable fb console.
- To switch monitor, set monitor variable to
- 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
- followed by "diufb init".
- Preserve logo bitmap at the top of the fb console.
- Signed-off-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a877880c6949e948bd63cd6ea4e216573d2f53dd
- Author: York Sun <yorksun@freescale.com>
- Date: Mon Oct 29 13:58:39 2007 -0500
- 8610: Add 8610 DIU display driver
- 1280x1024 and 1024x768 @ 32 bpp are supported now.
- DVI, Single-link LVDS, Double-link LVDS are all supported.
- Environmental variable "monitor" is used to specify monitor port.
- A new command "diufb" is introduced to reinitialize monitor
- and display a BMP file in the memory. So far, 1-bit, 4-bit,
- 8-bit and 24-bit BMP formats are supported.
- diufb init
- - initialize the diu driver
- Enable the port specified in the environmental variable "monitor"
- diufb addr
- - display bmp file in memory.
- The bmp image should be no bigger than the resolution, 1280x1024
- for DVI and double-link LVDS, 1024x768 for single-link LVDS.
- Note, this driver allocate memory but doesn't free it after use
- It is written on purpose -- to avoid a failure of reallocation
- due to memory fragement.
- ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
- Signed-off-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Jon loeliger <jdl@freescale.com>
- commit 52e5ddfecdda308f75782fae206b677b1810f5f9
- Author: York Sun <yorksun@freescale.com>
- Date: Wed Oct 31 10:43:59 2007 -0500
- FSL: Add a freescale bitmap logo.
- This Freescale logo is a 340 x 128 x 4bpp BMP file
- that can be displayed by the DIU Framebuffer driver.
- Signed-off-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
- Author: York Sun <yorksun@freescale.com>
- Date: Mon Oct 29 13:57:53 2007 -0500
- 8610: Make some extra debug environment variables conditional.
- One may #define ENV_DEBUG to get them back again.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Mon Oct 29 19:26:21 2007 +0800
- 8610: Actually enable pixis_reset CONFIGs
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit f3bceaab230b4748d0afc4109b6837308f018b40
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Oct 26 18:31:59 2007 +0800
- Fix the BAT definition of PCI IO on 8610 board
- The address in the BAT register is aligned with the BAT size.
- The original definition actually did not define BAT for PCIE2 IO.
- This patch fix this.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Mon Oct 29 19:26:21 2007 +0800
- Unify pixis_reset altbank across board families
- Basically, refactor the CFG_PIXIS_VBOOT_MASK values
- into the separate board config files.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Oct 26 18:32:00 2007 +0800
- make 8610 board use pixis reset
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Nov 1 12:23:29 2007 -0500
- 86xx: Fix broken variable reference when #def DEBUGing.
- Sometimes you can't reference the DDR2 controller variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Mon Nov 5 17:39:24 2007 +0800
- Implement general ULi 526x Ethernet driver support in U-boot
- This patch implements general ULi 526x Ethernet driver.
- Until now, it is the only native Ethernet port on
- MPC8610HPCD board, but it could be used on other boards
- with ULi 526x Ethernet port as well.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Nov 1 08:46:50 2007 -0500
- NET: Add Ethernet 1000BASE-X support for PPC4xx
- This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
- "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
- returns non-zero iff the PHY registers are configured for 1000BASE-X. The
- "mii info" command is modified to distinguish between 1000BASE-T and -X.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 298035df4948b113d29ac0e694717d34b95bc5dc
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Wed Oct 31 11:21:29 2007 -0500
- NET: Cosmetic changes
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 654f38b3a387886996a5a75771fbfc29cb4f225e
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 5 07:43:05 2007 +0100
- ppc4xx: Make output a little shorter on PCIe detection
- Now not max 3 lines but 2 lines are printed per PCIe port.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 992742a5b09d9040adbd156fb90756af66ade310
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Nov 3 23:09:27 2007 +0100
- Cleanup coding style; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e881cb563e32f45832b7b6db77bdcd017adcbb41
- Author: Bruce Adler <bruce.adler@ccpu.com>
- Date: Fri Nov 2 13:15:42 2007 -0700
- fix wording in README
- Changed the wording to properly describe the shadowing
- of the environment from ROM to RAM
- Signed-off-by: Bruce Adler <bruce.adler@acm.org>
- commit ad845beef06245426c57b53dcdc01b7dc70e0d45
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Wed Oct 31 02:18:15 2007 +0900
- blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit ec22755799466c8a103664bb3a5e647bf9c238f4
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Thu Oct 25 16:08:14 2007 +0300
- Trimmed some variables in ne2000.c
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Oct 25 17:51:27 2007 +0800
- Fix the issue of usb_kbd driver missing the scan code of key 'z'.
- The scan code of the key 'z' is 0x1d, which should be handled.
- The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
- controller.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Oct 25 17:30:04 2007 +0800
- Fix USB support issue for MPC8641HPCN board.
- The configuration file has already enabled USB, but it
- missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
- on MPC8641HPCN can not work because of the wrong USB
- register endian.
- And add the USB command to U-Boot commands list.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit 4e62041023dc3de9d98d977bb080235bc6d035e0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Oct 24 18:16:01 2007 +0200
- Use config_cmd_default.h instead of config_cmd_all.h
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 56622f87857439b1c221e9deef11a9d5bb5d4308
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Oct 24 01:37:36 2007 +0200
- TQM5200: Call usb_cpu_init() during board init
- usb_cpu_init() configures GPS USB pins, clocks, etc. and
- is required for proper operation of kernel USB subsystem.
- This setup was previously done in the kernel by the fixup
- code which is being removed, thus low level init must be
- done by U-boot now.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Oct 23 16:25:50 2007 +0200
- Fix typo in nfs.c
- An obvious typo. Originally fixed in linkstation u-boot port.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Oct 23 14:35:05 2007 +0200
- Fix a typo in cpu/mpc824x/interrupts.c
- Since December 2003 the timer_interrupt_cpu() function in
- cpu/mpc824x/interrupts.c contains what seems to be a superfluous
- parameter. Remove it.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
- Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
- Date: Wed Oct 17 11:13:51 2007 +0200
- add ft_cpu_setup(..) on mpc8260
- Add ft_cpu_setup(..)-function to adapt it for use with libfdt
- based on code from mpc5xxx
- Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
- --
- commit 6abd82e19ae93c0b4d104e50165e235915ec0875
- Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
- Date: Wed Oct 17 11:18:42 2007 +0200
- changes for IDS8247 board support
- To get the IDS8247 board working following are done:
- - FCC2 is deactivated
- - FCC1 is activated
- - I2C is activated
- - CFI driver is activated
- - Adapted for use with LIBFDT
- Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
- --
- commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Nov 3 12:08:28 2007 +0100
- ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
- This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
- Again, only one image supports both targets.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Oct 24 15:48:37 2007 +0200
- ATSTK1002: Remove default ethernet addresses
- Wolfgang is right: It's not a good idea to set up default initial
- ethernet addresses for a board, even though they belong to the local
- range.
- This will change the failure mode from "IT manager screams at you for
- using duplicate ethernet addresses" to a nice error message explaining
- that the ethernet address hasn't been set properly.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit e5c794e491a57d829b6d8733e2ed8368a2269abf
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:40:35 2007 -0400
- DHCP Client Fix
- This is a multi-part message in MIME format.
- commit e6e505eae94ed721e123e177489291fc4544b7b8
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:19:03 2007 -0400
- Found a bug in the way the DHCP Request packet is built, where the IP address
- that is offered by the server is bound to prematurely. This patch is a fix of
- that bug where the IP address offered by the DHCP server is not used until
- after the DHCP ACK from the server is received.
- Signed-off-by: Justin Flammia <jflammia@savantav.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 5d96d40d3f36da33348e68f9ea993f383e11f997
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:58:34 2007 +0100
- ppc4xx: Fix acadia_nand build problem
- Since the cache handling functions were moved from start.S into cache.S
- the acadia NAND booting Makfile needs to be adapted accordingly.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:57:11 2007 +0100
- ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
- This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
- and to the Sequoia TLB init code. Now the cache can be enabled on 44x
- boards by defining CONFIG_4xx_DCACHE in the board config file. This
- option will disappear, when more boards use is successfully and no
- more known problems exist.
- This is tested successfully on Sequoia and Katmai. The only problem that
- needs to be fixed is, that USB is not working on Sequoia right now, since
- it will need some cache handling code too, similar to the 4xx EMAC driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:51:10 2007 +0100
- ppc4xx: Enable CPU POST test for 4xx with dcache enabled
- Now with caches enabled (i- and d-cache) on 44x, we need a chance to
- disable the cache for the CPU POST tests, since these tests consist
- of self modifying code. This is done via the new change_tlb() function.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f71b2888b4b3c870909a0341427b2a914246f81f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:47:26 2007 +0100
- ppc4xx: Change 4xx POST ethernet test to handle cached memory too
- This patch enables the 4xx EMAC POST driver to work too, when dcache is
- enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a2685904061b35a17583d65fe47cdc2686a69eaa
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:45:53 2007 +0100
- ppc4xx: Remove temporary TLB entry in POST cache test only for 440
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ff768cb168d8157c24a25016dbfbeb465e47f420
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 18:01:24 2007 +0100
- ppc4xx: Change 4xx ethernet driver to handle cached memory too
- This patch enables the 4xx EMAC driver to work too, when dcache is
- enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 483e09a223c666269ef81d3573a6591b1046b0ef
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 17:59:22 2007 +0100
- ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
- This function is used to either turn cache on or off in a specific
- memory area.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 17:57:52 2007 +0100
- ppc4xx: Remove cache definition from 4xx board config files
- All 4xx board config files don't need the cache definitions anymore.
- These are now defined in common headers.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9b94ac61d2176185c30adf0793e079ec30e68687
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 17:55:58 2007 +0100
- ppc4xx: Rework 4xx cache support
- New cache handling functions added and all existing functions
- moved from start.S into seperate cache.S.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 06713773da4ac3d390c63d82641eb553224b27c2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 18:03:12 2007 +0200
- ppc4xx: Remove compiler warning from previous commit
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 14:40:30 2007 +0200
- ppc4xx: Remove temporary TLB entry in POST cache test
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1338e6a81834099ba19733b69aafd8ef5f098094
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 14:05:08 2007 +0200
- ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
- I lately noticed, that newer 4xx board with GBit support sometimes don't
- finish link autonegotiation in 4 seconds. Changing this timeout to 5
- seconds seems fine here.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 14:03:17 2007 +0200
- ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
- This patch changes all in32/out32 calls to use the recommended in_be32/
- out_be32 macros instead.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 25 12:24:59 2007 +0200
- ppc4xx: Fix POST ethernet test for Haleakala
- The POST ethernet test needed to be changed to dynamically determine
- the count of ethernet devices. This code is cloned from the 4xx
- ethernet driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 11:31:05 2007 +0200
- ppc4xx: Correct UART input clock calculation and passing to fdt
- We now use a value in the gd (global data) structure for the UART input
- frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
- in get_sys_info().
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 10:10:08 2007 +0200
- ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
- The Haleakala is nearly identical with the Kilauea eval board. The only
- difference is that the 405EXr only supports one EMAC and one PCIe
- interface. This patch adds support for the Haleakala board by using
- the identical image for Kilauea and Haleakala. The distinction is done
- by comparing the PVR.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9f798766aa85e62eb8fa8c721e148df609b78137
- Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Date: Tue Oct 23 08:29:10 2007 +0200
- ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
- This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
- Note:
- As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
- DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
- modules are still plugged in. So it is recommended to remove the DIMM
- modules while using the NAND booting code with the fixed SDRAM setup!
- Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 16:24:44 2007 +0200
- ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3248f63ad89cb031491edb7016587fe6e9a238b9
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 16:22:40 2007 +0200
- ppc4xx: Rework of 4xx serial driver (4)
- Change 4xx_uart.c:
- - Use in_8/out_8 macros instead of in8/out8
- - No need for UART_BASE marco anymore, now really handled via function
- parameter
- - serial_init_common() introduced
- - Further coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e61cb8163a66b8a135696ae232e2bead1ce0a049
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 15:45:49 2007 +0200
- ppc4xx: Rework of 4xx serial driver (3)
- Change all linker scripts to reference the changed driver name iop480_uart.o.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 882ae41274921f9016131806bdeb27e19606f47a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 15:44:39 2007 +0200
- ppc4xx: Rework of 4xx serial driver (2)
- Change all linker scripts to reference the changed driver name 4xx_uart.o.
- Note: In most cased all these explicit referencing of these object files
- in the linker scripts is not neccessary. Only for manually embedded
- environment into the U-Boot image, which is not done is most cases.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ad31e40bed042cb670d0036fea96435007afb838
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 15:09:59 2007 +0200
- ppc4xx: Rework of 4xx serial driver (1)
- This patch starts the rework of the PPC4xx serial driver. First we split
- the file into two seperate files, one 4xx_uart.c with the 405/440 UART
- handling code and the other one iop480_uart.c with the UART code for the
- PLX-Tech IOP480 PPC (PPC403 based).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 764e7417ee5f6e25b1715720e7d7dd3487109385
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 10:30:38 2007 +0200
- ppc4xx: Correct UART input clock calculation and passing to fdt
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 07:34:34 2007 +0200
- ppc4xx: Add initial AMCC Makalu 405EX support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fa8aea20456e6f1dba43f46bcc72024dd9499998
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 07:33:52 2007 +0200
- ppc4xx: Add freqUART to CPU speed detection
- This value is needed later for the device tree configuration of
- the uart clock.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Oct 21 14:26:29 2007 +0200
- ppc: Small Kilauea cleanup of config file
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 758c037aeead34b49631b8da3a90b1bba14c0410
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Oct 21 08:16:12 2007 +0200
- rtc: Add Xicor/Intersil X1205 RTC support
- This patch adds support for the Xicor/Intersil X1205 RTC used on the
- AMCC Makalu eval board. This driver is basically cloned from the Linux
- driver version (2.6.23).
- This patch also introduces the Linux bcd.h header for the BCD2BIN/
- BIN2BCD conversions. In the future some of the other U-Boot RTC driver
- should be converted to also use this header instead of implementing
- their own local copy of these functions/macros.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Oct 21 08:12:41 2007 +0200
- ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
- This patch moves some common 4xx macros and the PPC405_SYS_INFO/
- PPC440_SYS_INFO structure into the common ppc4xx.h header.
- Lot's of other macros are good candidates to be consolidated this way
- in the future.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 770c7af5800f598d22730d1f4b70f16c9b33512e
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Oct 21 08:05:18 2007 +0200
- ppc4xx: Fix size setup in Kilauea DDR2 init routine
- The size was initilized wrong. Instead of 256MB, the DDR2 controller
- was setup to 512MB. Now the correct values is used.
- This patch also does a little cleanup and adds a comment here.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
- Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Date: Thu Oct 18 17:29:04 2007 +0200
- ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
- CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
- number is used to access system registers.
- Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c36c68160333ac5fe41ec3db12a728b7075b3912
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 18 07:42:27 2007 +0200
- ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
- On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
- is the internal SRAM. Since I now ported and tested this endpoint mode
- on Kilauea successfully to map to 0 (SDRAM), I also changed this for
- Katmai.
- Yucca will stay at internal SRAM for now. Not sure if somebody relies on
- this setup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5cb4af4791f61843432155142b6cfac901f66c10
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 18 07:39:38 2007 +0200
- ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
- This patch adds endpoint support for the AMCC Kilauea eval board. It can
- be tested by connecting a reworked PCIe cable (only 1x lane singles
- connected) to another root-complex.
- In this test setup, a 64MB inbound window is configured at BAR0 which maps
- to 0 on the PLB side. So accessing this BAR0 from the root-complex will
- access the first 64MB of the SDRAM on the PPC side.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 13 16:43:23 2007 +0200
- ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
- This patch adds support for dynamic configuration of PCIe ports for the
- AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
- boards Yucca & Katmai and the 405EX board Kilauea.
- This dynamic configuration is done via the "pcie_mode" environement
- variable. This variable can be set to "EP" or "RP" for endpoint or
- rootpoint mode. Multiple values can be joined via the ":" delimiter.
- Here an example:
- pcie_mode=RP:EP:EP
- This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
- as endpoint.
- Per default Yucca will be configured as:
- pcie_mode=RP:EP:EP
- Per default Katmai will be configured as:
- pcie_mode=RP:RP:REP
- Per default Kilauea will be configured as:
- pcie_mode=RP:RP
- Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 11 11:15:59 2007 +0200
- ppc4xx: Enable device tree support (fdt) on Kilauea per default
- This patch enables the fdt support on the AMCC Kilauea eval board.
- Additionally now EBC ranges fdt fixup is included to support NOR
- FLASH mapping via the Linux physmap_of driver.
- This Kilauea port now support booting arch/ppc and arch/powerpc
- Linux kernels. The default environment "net_nfs" is for arch/ppc
- and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
- support will be removed.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 11 11:11:45 2007 +0200
- ppc4xx: Add additional debug info to 4xx fdt support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 21:28:58 2007 +0200
- ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1941cce71b1ae975602854045061e82f94ecd012
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:35:10 2007 +0200
- ppc4xx: Fix small merge problem in 4xx_enet.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:11:30 2007 +0200
- ppc4xx: Add initial AMCC Kilauea 405EX support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit dbbd125721aea6645fdb962f36bd41f59e272f9d
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:10:59 2007 +0200
- ppc4xx: Add PPC405EX support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:09:36 2007 +0200
- ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:07:50 2007 +0200
- ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:04:57 2007 +0200
- POST: Add 405EX support to 4xx UART POST test
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 15:10:02 2007 +0200
- DTT: Prepare DS1775 driver for use of different I2C addresses
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 19e93b1e16d267220440d827b920fbad8abfa70f
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 14:23:43 2007 +0200
- ppc4xx: 4xx_pcie: Change PCIe status output to match common style
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ff68f66bcb0da847845aa2fac11eba6c25938c99
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 09:22:33 2007 +0200
- ppc4xx: 4xx_pcie: Disable debug output as default
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 09:18:23 2007 +0200
- ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4dbee8a90df613eb517aadbecebd70f168913d30
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 07:57:20 2007 +0200
- ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
- 128MB seems to be the smallest possible value for the memory size
- for on PCIe port. With this change now the BAR's of the PCIe cards
- are accessible under U-Boot.
- One big note: This only works for PCIe port 0 & 1. For port 2 this
- currently doesn't work, since the base address is now 0xc0000000
- (0xb0000000 + 2 * 0x08000000), and this is already occupied by
- CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
- to change the base addresses completely and this change would have
- too much impact right now.
- This patch adds debug output to the 4xx pcie driver too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 21:16:32 2007 +0200
- ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 15:01:02 2007 +0200
- ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
- These files were introduced with the IBM 405GP but are currently used on all
- 4xx PPC platforms. So the name doesn't match the content anymore. This patch
- renames the files to 4xx_pci.c/h.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 14:14:58 2007 +0200
- ppc4xx: Add a comment for 405EX PCIe endpoint configuration
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 10:38:09 2007 +0200
- ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
- (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
- the SDR registers of the PCIe ports. This makes the overall design
- clearer, since it removed a lot of switch statements which are not
- needed anymore.
- Also, the functions ppc4xx_init_pcie_rootport() and
- ppc4xx_init_pcie_entport() are merged into a single function
- ppc4xx_init_pcie_port(), since most of the code was duplicated.
- This makes maintainance and porting to other 4xx platforms
- easier.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 026f71106871f31d17d0ea0db9a7547ff92934bc
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 07:48:09 2007 +0200
- ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
- This patch is the first patch of a series to make the 440SPe PCIe code
- usable on different 4xx PPC platforms. In preperation for the new 405EX
- which is also equipped with PCIe interfaces.
- (2) This patch renames the functions from 440spe_ to 4xx_ with a
- little additional cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c7c6da23028f146d912514b95aefa3da7cf37699
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 07:34:10 2007 +0200
- ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
- This patch is the first patch of a series to make the 440SPe PCIe code
- usable on different 4xx PPC platforms. In preperation for the new 405EX
- which is also equipped with PCIe interfaces.
- (1) This patch renames the files from 440spe_pcie to 4xx_pcie
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Oct 24 01:37:36 2007 +0200
- TQM5200: Call usb_cpu_init() during board init
- usb_cpu_init() configures GPS USB pins, clocks, etc. and
- is required for proper operation of kernel USB subsystem.
- This setup was previously done in the kernel by the fixup
- code which is being removed, thus low level init must be
- done by U-boot now.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit b5af773f8d92677e06f3295b45557c9d0a487c24
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Oct 25 17:51:27 2007 +0800
- Fix the issue of usb_kbd driver missing the scan code of key 'z'.
- The scan code of the key 'z' is 0x1d, which should be handled.
- The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
- controller.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Mon Oct 15 11:59:17 2007 +0200
- PXA USB OHCI: "usb stop" implementation.
- Some USB keys need to be switched off before loading the kernel
- otherwise they can remain in an undefined status which prevents them
- to be correctly recognized by the kernel.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 31548249decf18a6b877a18436b6139dd483fe4a
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:40:35 2007 -0400
- DHCP Client Fix
- This is a multi-part message in MIME format.
- commit e6e505eae94ed721e123e177489291fc4544b7b8
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:19:03 2007 -0400
- Found a bug in the way the DHCP Request packet is built, where the IP address
- that is offered by the server is bound to prematurely. This patch is a fix of
- that bug where the IP address offered by the DHCP server is not used until
- after the DHCP ACK from the server is received.
- Signed-off-by: Justin Flammia <jflammia@savantav.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:16:22 2007 -0500
- ColdFire 54455: Fix correct boot location for atmel and intel
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:14:00 2007 -0500
- ColdFire: Fix build error when CONFIG_WATCHDOG is defined
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit c67e12e705b204cfe914e3e3e693d69a445dcabf
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:12:36 2007 -0500
- ColdFire 5329: Assign correct SDRAM size and fix cache
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:10:23 2007 -0500
- ColdFire 5253: Assign correct SDRAM size
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2acefa72ee0026f862ab65597ca687428f63a973
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:09:17 2007 -0500
- ColdFire 5282: Fix external flash boot and return dramsize
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Oct 25 17:20:01 2007 +0200
- TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Oct 24 08:42:25 2007 +0200
- TQM5200: fix spurious characters on second serial interface
- With this patch PSC3 is configured as UART. This is done, because if
- the pins of PSC3 are not configured at all (-> all pins are GPI),
- due to crosstalk, spurious characters may be send over the RX232_2_TXD
- signal line.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit be4a87f11e297a5cededbf7dd71c0248f3874acd
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Oct 24 08:41:27 2007 +0200
- TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
- Some commands for the STK52xx base board try to access the SM501 grafic
- controller. But the TQM5200S has no grafic controller (only the TQM5200
- and the TQM5200B have). This patch deactivates the commands accessing
- the SM501 for the TQM5200S.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit b31f64343ead9482cd439b1adbe4c34026a641b1
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Oct 22 16:45:53 2007 +0200
- TQM5200: fix spurious characters on second serial interface
- With this patch PSC3 is configured as UART. This is done, because if
- the pins of PSC3 are not configured at all (-> all pins are GPI),
- due to crosstalk, spurious characters may be send over the RX232_2_TXD
- signal line.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Oct 22 16:40:06 2007 +0200
- TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
- Some commands for the STK52xx base board try to access the SM501 grafic
- controller. But the TQM5200S has no grafic controller (only the TQM5200
- and the TQM5200B have). This patch deactivates the commands accessing
- the SM501 for the TQM5200S.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Oct 21 09:14:28 2007 +0200
- Mips: Fix string functions differ prototype declaration
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Oct 19 17:51:40 2007 -0500
- fsl_pci_init enable COMMAND_MEMORY if inbound window
- Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
- to pciauto_setup_device has the side effect of not getting
- COMMAND_MEMORY set.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit e9d0d527992566ebef9826962ff1745b2f082b92
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 10:55:24 2007 +0200
- delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 08:10:15 2007 +0200
- fix warning: no return statement in function returning non-void
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e78220f6e514206757acfe247297fc9a328a881f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 06:33:45 2007 +0200
- xsengine: Fix no partition type specified, use DOS as default
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 00:24:59 2007 +0200
- lubbock: Fix no partition type specified, use DOS as default
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Oct 23 16:50:03 2007 +0200
- Coding style: keep lists sorted; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 58b74b05c621e2835ecf4e2d3243042cf4186777
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 00:09:05 2007 +0200
- Fix missing drivers makefile entries ds1722.c mw_eeprom.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 96455bfebc9887837095c9051d216f53c61b5f10
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 00:07:39 2007 +0200
- Fix warning differ in signedness in board/innokom/innokom.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Fri Oct 19 00:25:33 2007 +0200
- fix pxa255_idp board
- The pxa255_idp being an old unmaintained board showed several issues:
- 1. CONFIG_INIT_CRITICAL was still defined.
- 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
- 3. Symbol flash_addr was undeclared.
- 4. The boards lowlevel_init function was still called memsetup.
- 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
- 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
- 'target CPU does not support interworking' warnings on recent compilers.
- 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
- indexes rather than the register definitions from the pxa-regs header
- file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
- avoid any ambiguities.
- 8. There were several redefinition warnings concerning ICMR, OSMR3,
- OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
- 9. The board configuration file was rather outdated.
- 10. The part header file defined the vendor, product and revision arrays
- as unsigned chars instead of just chars in the block_dev_desc_t
- structure.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
- Author: Rune Torgersen <runet@innovsys.com>
- Date: Wed Oct 17 11:56:31 2007 -0500
- Make MPC8266ADS command selection more robust
- Fix MPC8266 command line definition so it won't break when new commands
- are added to u-boot.
- Signed-off-by Rune Torgersen <runet@innovsys.com>
- commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Oct 23 13:14:10 2007 +0200
- Motion-PRO: Update configuration to accomodate next generation board.
- New board has faster oscillator and a different Flash chip. This affects:
- - CFG_MPC5XXX_CLKIN
- - SDRAM timings
- - Flash CS configuration (timings)
- - Flash sector size, and thus MTD partition layout
- - malloc() arena size (due to bigger Flash sectors)
- - smaller memory test range (due to bigger malloc() arena)
- This patch also enables more extensive memory testing via "mtest".
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit eff501904df2bf1724a750062628ba2c51dbb1f8
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Oct 23 11:36:07 2007 +0200
- Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
- Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
- register must be written a value of 0x00000004 as the first step of the
- SDRAM contorller configuration.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Oct 23 10:22:16 2007 +0100
- Move PL01* serial drivers to drivers/serial and adjust Makefiles.
- commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 10:17:42 2007 +0200
- ppc4xx: lwmon5: Some further GPIO config changes
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Sun Oct 21 22:10:10 2007 +0900
- [MIPS] Fix UNCACHED_SDRAM
- PHYSADDR is for physical address, KSEG1ADDR is for uncached.
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 00101dd7a32d12f698150123e47e4b3420279f86
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 21:30:42 2007 +0900
- [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit eb700636db017d310edaeb559b13d82588560674
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 10:55:37 2007 +0900
- [MIPS] u-boot.lds: Define _gp in a standard manner
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 10:55:36 2007 +0900
- [MIPS] Fix $gp usage
- Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
- As a general principle, we should use _gp for $gp.
- Thanks to linker script's help we fortunately have _gp which equals to
- _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
- be able to access to GOT entires, global variables and procedure entry
- points. The right thing to do is to use _gp.
- This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
- which holds the offset from _gp. When updating GOT entries, we use this
- offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
- This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
- I made some change to leave over num_got_entries.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Cc: Vlad Lungu <vlad@comsys.ro>
- commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 10:55:36 2007 +0900
- [MIPS] u-boot.lds: Fix __got_start and __got_end
- Ensure that __got_start points to top of the `.got', and __got_end points
- to bottom as well, so that we never fail to count num_got_entries.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 10:55:36 2007 +0900
- [MIPS] u-boot.lds: Remove duplicated .sdata section
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Oct 21 01:01:17 2007 +0200
- Minor coding style cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Thu Oct 4 20:47:10 2007 +0300
- Fix NE2000 driver:
- Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
- to do anything in eth_stop() if eth_init() was not called.
- Simplified RX path in order to avoid timeouts on really really
- fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
- clever enough to cope with 1 packet per eth_rx().
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit df90968b48fb34fa9072fab150db2ac89678f537
- Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
- Date: Mon Sep 24 13:32:13 2007 -0400
- Setting MSR[DE] in do_reset
- Hello,
- This patch ensures the soft reset of the board for the 85xx boards
- by setting the MSR[DE] in the do_reset function.
- Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
- commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
- Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
- Date: Mon Sep 24 13:36:01 2007 -0400
- MSR overwrite fix
- Hello,
- This patch fixes the MSR overwrite in the start.S when moving out of
- the last 4K page.
- Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
- commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
- Author: Dan Wilson <dwilson@fulcrummicro.com>
- Date: Fri Oct 19 11:33:48 2007 -0500
- tsec driver should clear RHALT on startup
- This was causing problems for some people.
- Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
- Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Oct 11 00:29:18 2007 -0500
- Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
- On the MPC85xx CDS we have two issues:
- 1. The device tree fixup code did not check to see if the property we are
- trying to update is actually found. Its possible that it would update
- random memory starting at 0.
- 2. Newer Linux kernel's have moved the location of the PCI nodes to be
- sibilings of the soc node and not children. The explicit PATH to the PCI
- node would not be found for these device trees. Add the ability to handle
- both paths. In the future we shouldn't handle such fixups by explicit path.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a3063eec775719b7e91023bbec3f64b3118791df
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Oct 11 00:18:48 2007 -0500
- Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
- On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
- console. Make it so we match that config what we tell Linux as the early
- STDOUT console.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e1ce3cb617bb06f91f82f98915391175addf3e82
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Oct 2 11:12:27 2007 -0500
- Remove magic numbers from cache related operations for mpc85xx
- The mpc85xx start code uses some magic numbers that we actually
- have #defines for in <config.h> so use those instead.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Oct 19 16:47:26 2007 +0200
- Fix two typos.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 281df457c1aa50d2752165d0c5c3282d4027b974
- Author: Tony Li <tony.li@freescale.com>
- Date: Thu Oct 18 17:47:19 2007 +0800
- mpc83xx: Add configure entry for MPC83xx ATM support
- Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
- Makfile and MAKEALL
- Signed-off-by: Tony Li <tony.li@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d2646554f529a9577515eceb0ec5eceee18244ba
- Author: Tony Li <tony.li@freescale.com>
- Date: Thu Oct 18 17:44:38 2007 +0800
- mpc83xx: pq-mds-pib.c typo error
- Correct to val8 from val.
- Signed-off-by: Tony Li <tony.li@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3e11ae80fec1ee12194940955431186abf6009c2
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 17 15:40:19 2007 +0200
- ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 16 15:27:43 2007 -0500
- Initial mpc8610hpcd Makefile files.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 16 15:26:51 2007 -0500
- Initial mpc8610hpcd cpu/, README and include/ files.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 16 13:54:01 2007 -0500
- Initial mpc8610hpcd board files.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
- Author: runet@innovsys.com <runet@innovsys.com>
- Date: Tue Oct 16 14:50:40 2007 -0500
- Make MPC8266ADS board compile again.
- Signed-off-by: Runet Torgersen <runet@innovsys.com>
- commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Aug 27 12:41:03 2007 -0500
- 86xx: Allow for fewer DDR slots per memory controller.
- As a direct correlation exists between DDR DIMM slots
- and SPD EEPROM addresses used to configure them, use
- the individually defined SPD_EEPROM_ADDRESS* values to
- determine if a DDR DIMM slot should have its SPD
- configuration read or not.
- Effectively, this now allows for 1 or 2 DIMM slots
- per memory controller.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4d4a945e189a2f384c66432316da2788a0ac1607
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Mon Oct 15 11:59:17 2007 +0200
- PXA USB OHCI: "usb stop" implementation.
- Some USB keys need to be switched off before loading the kernel
- otherwise they can remain in an undefined status which prevents them
- to be correctly recognized by the kernel.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit e2e93442e558cf1500e92861f99713b2f045ea22
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 15 11:39:00 2007 +0200
- ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
- The I2C bootstrap values that can be setup via the "bootstrap" command,
- were setup incorrect regarding the generation of the internal sync PCI
- clock. The values for PLB clock == 133MHz were slighly incorrect and the
- values for PLB clock == 166MHz were totally incorrect. This could
- lead to a hangup upon booting while PCI configuration scan.
- This patch fixes this issue and configures valid PCI divisor values
- for the sync PCI clock, with respect to the provided external async
- PCI frequency.
- Here the values of the formula in the chapter 14.2 "PCI clocking"
- from the 440EPx users manual:
- AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
- 33MHz async PCI frequency:
- PLB = 133:
- => 32 <= 44.3 <= 65 (div = 3)
- PLB = 166:
- => 32 <= 55.3 <= 65 (div = 3)
- 66MHz async PCI frequency:
- PLB = 133:
- => 65 <= 66.5 <= 132 (div = 2)
- PLB = 166:
- => 65 <= 83 <= 132 (div = 2)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 15 11:29:33 2007 +0200
- ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
- The BCSR status bit for the 66MHz PCI operation was correctly
- addressed (MSB/LSB problem). Now the correct currently setup
- PCI frequency is displayed upon bootup.
- This patch also fixes this problem on Rainier & Yellowstone, since these
- boards use the same souce code as Sequoia & Yosemite do.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Sep 26 17:55:56 2007 +0200
- TQM860M: adjust for doubled flash sector size.
- Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
- doubled sector size.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
- Author: Jens Gehrlein <jens.gehrlein@tqs.de>
- Date: Wed Sep 26 17:55:54 2007 +0200
- TQM8xx: Fix CAN timing.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit d43e489baf02afae49077791fb22332d240d8656
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Thu Sep 27 14:54:36 2007 +0200
- TQM866M: fix SDRAM refresh
- At 133 MHz the current SDRAM refresh rate is too fast
- (measured 4 * 1.17 us).
- CFG_MAMR_PTA changes from 39 to 97. This result
- in a refresh rate of 4 * 7.8 us at the default clock
- 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
- This is a compromise until a new method is found to
- adjust the refresh rate.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 9ef57bbee1c67cc01da2026c242c4692db32be36
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Sep 26 17:55:55 2007 +0200
- TQM866M: adjust for doubled flash sector size.
- Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
- doubled sector size.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Oct 14 16:12:29 2007 +0200
- [FIX] XUPV2P change command handling
- and remove code violation
- commit 636400198228d96983c06657b17f760f5989958e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Oct 14 00:13:19 2007 +0200
- Prepare for 1.3.0-rc3 release
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Sep 29 13:41:37 2007 +0200
- Fix warning differ in signedness in cpu/pxa/mmc.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit fc19e36f741e8bc727c0a330170b3b5db90399ef
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Oct 13 23:51:14 2007 +0200
- Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Oct 13 21:15:39 2007 +0200
- Coding Style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e1893815b0999410d7a327589611c7b38e95299e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Oct 12 15:49:39 2007 +0200
- GP3 SSA: enable RTC
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8002012041f1ff9f997a5727abe5015f70cd2e46
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Oct 9 13:58:24 2007 +0200
- [ads5121] EEPROM support added.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Oct 6 18:55:35 2007 +0200
- AVR32: Initialize bi_flash* in board_init_r
- The ATSTK1000-specific flash driver intializes bi_flashstart,
- bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
- driver, don't.
- Initialize these in board_init_r instead so that things will still be
- set up correctly when we switch to the CFI driver.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Oct 5 10:40:54 2007 +0200
- tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 92869195ef8210758d2176230c0a36897afd50ed
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Oct 5 09:46:06 2007 +0200
- CM5200: Fix missing null-termination in hostname manipulation code
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Tue Oct 2 19:09:01 2007 +0200
- Fix memtest breakage
- CFG_MEMTEST_START uses weird magic involving gd, which fails to
- compile. Use hardcoded values instead (we actually know how much RAM
- we have on board.)
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 2 11:44:46 2007 +0200
- ppc4xx: Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 2 11:44:19 2007 +0200
- ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Mon Oct 1 09:51:50 2007 +0200
- Program EPLD to force full duplex mode for PHY.
- EPLD forces modes of PHY operation. By default full duplex is turned off.
- This fix turns it on.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
- Author: Timo Ketola <timo.ketola@exertus.fi>
- Date: Mon Sep 24 14:50:32 2007 +0300
- Bugfix: Use only one PTD for one endpoint
- Original isp116x-hcd code prepared multiple PTDs for longer than 16
- byte transfers for one endpoint. That is unnecessary because the
- ISP116x is able to split long data from one PTD into multiple
- transactions based on the buffer size of the endpoint. It also caused
- serious problems if the endpoint NAKed some of the transactions. In
- that case ISP116x wouldn't notice that the other PTDs were for the same
- endpoint and would try the other PTDs possibly out of order. That would
- break the whole transfer.
- This patch makes isp116x_submit_job to use one PTD for one transfer.
- Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 86ec86c04326c3913178a7679aa910de071da75d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Sep 27 23:27:47 2007 +0200
- Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Sep 11 14:12:55 2007 +0200
- ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Sep 26 16:35:54 2007 -0500
- 85xx io out functions need sync after write.
- This fixes the mc146818 rtc_read/write functions for 85xx.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Sep 25 15:48:05 2007 -0600
- Fpga: fix incorrect test of CFG_FPGA_XILINX macro
- CFG_FPGA_XILINX is a bit value used to test against the value in
- CONFIG_FPGA. Testing for a value will always return TRUE. I don't
- think that is the intention in this code.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:41:30 2007 +0200
- [FIX] change command handling and removing code violation
- commit f240356507038e5ce55e8a24cb2607e9eae6d10c
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:36:06 2007 +0200
- [FIX] change sets of commands
- because changing of command handling brings
- compilation problems
- commit cb1bc63b75a232571eb69aa2c8aa919321655845
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:30:42 2007 +0200
- [FIX] Email reparation & Copyright
- Both codes are written by myself without any
- support from CTU
- commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:25:11 2007 +0200
- [PATCH] Change macro name for UartLite
- because PowerPC 405 can use UartLite as console
- commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:21:19 2007 +0200
- [PATCH] Add support for design without interrupt controller
- Polling timer
- commit 0731933ec8ec45d02ba89b52df673d526873cdde
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:19:48 2007 +0200
- [FIX] resolve problem with cpu without barrel shifter
- commit db14d77995ce515b728b178b63f82babe60e3d56
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:18:46 2007 +0200
- [FIX] repair email address
- commit 481d4328618804add1f818a6c96296121cd0528e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:17:42 2007 +0200
- [FIX] repair MFSL commands
- commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:08:37 2007 +0200
- synchronizition with mainline
- commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:42:38 2007 +0900
- sh: Add support command of ide with sh
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:38:42 2007 +0900
- sh: Update Makefile
- Add support MS7722SE01 to Makefile.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:31:13 2007 +0900
- sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:19:24 2007 +0900
- sh: Update MS7750SE01 platform
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 516ad760db3553766267ada01b7d5d727faa4bbd
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:17:08 2007 +0900
- sh: Remove comment out code from include/asm-sh/cpu_sh4.h
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit b02bad128669e567fce87d8df823b06a0144b8db
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:12:30 2007 +0900
- sh: Update core code of SuperH.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Sep 20 00:04:14 2007 +0200
- v1.3.0-rc2
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 135e19bc2773ebca487e9a8371f67e1ba202313a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 18 21:36:35 2007 +0200
- Avoid compiler warning.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8a783a65851bc7421ab69f442261215e21b8891a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Sep 18 12:24:57 2007 -0600
- Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
- /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
- nulls in a string differently. For example, the following statement:
- echo "this is a string\0" > afile
- Will produce the following with /bin/bash:
- "this is a string\0"
- But with /bin/dash, will produce:
- "this is a string
- Bug fixed by moving the embedded null out of the makefile and into the
- config header. Also renamed the macro to avoid usage colision with the same
- macro used by other board ports.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 18 17:40:27 2007 +0200
- MCC200: fix build warning
- The MCC200 board config file includes version.h for some customer-
- specific setting, which causes warnings with "make depend"; build
- version.h before depend.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit bd86220f58b99d6896198c385fda132f0c980915
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 18 13:07:54 2007 +0100
- Move coloured led API to status_led.h
- Improve indentation in drivers/at45.c
- commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
- Author: Eirik Aanonsen <eaa@wprmedical.com>
- Date: Tue Sep 18 08:47:20 2007 +0200
- Update atstk1002 bootargs.
- Updates to atstk1002 U-Boot header file:
- - Changed bootargs:
- * Set the bootargs for at1002 to point to the SD-card partition instead
- * ... of the boot flash.
- * Removing the rootfstype since that argument are not needed.
- Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
- Author: Eirik Aanonsen <eaa@wprmedical.com>
- Date: Wed Sep 12 13:32:37 2007 +0200
- Add some comments to clocks in atstk1002.h
- This patch applies some clarifying comments to how the different
- clocks are setup according to atstk1002.h Some of the previous
- comments where stating wrongful information.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 97213f32416ead885deafea86774e912ffd60ad0
- Author: David Saada <David.Saada@ecitele.com>
- Date: Mon Sep 17 17:04:47 2007 +0200
- Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
- Signed-off-by: David Saada <david.saada@ecitele.com>
- commit 30363e98fa470fbecea5e8bc0f1443352754f303
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 17 08:20:47 2007 +0200
- Small whitespace cleanup of OneNAND patch
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Sep 10 17:15:14 2007 +0900
- OneNAND support (take #2)
- [PATCH 3/3] OneNAND support (take #2)
- OneNAND support at U-Boot
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 17aa2800457df0c06b41516f46f126712c196219
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Sep 10 17:14:34 2007 +0900
- OneNAND support (take #2)
- [PATCH 2/3] OneNAND support (take #2)
- OneNAND support at U-Boot
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Sep 10 17:13:49 2007 +0900
- OneNAND support (take #2)
- [PATCH 1/3] OneNAND support (take #2)
- OneNAND support at U-Boot
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Sep 16 20:51:57 2007 +0200
- [FIX] remove files form repository
- commit 67c31036acaaaa992fc346cc89db0909a7e733c4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Sep 16 17:10:04 2007 +0200
- TQM8xx[LM]: Fix broken environment alignment.
- With recent toolchains, the environment sectors were no longer aligned to
- sector boundaries. The reason was a combination of two bugs:
- 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
- for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
- this gets defined, is not included here (and cannot be included
- without causing lots of problems).
- Added a new #define CFG_USE_PPCENV for all boards which really
- want to put the environment is a ".ppcenv" section.
- 2) The linker scripts just include environment.o, silently assuming
- that the objects in that file are really in the order in which
- they are coded in the C file, i. e. "environment" first, then
- "redundand_environment", and "env_size" last. However, current
- toolchains (GCC-4.x) reorder the objects, causing the environment
- data not to start on a flash sector boundary:
- Instead of: we got:
- 40008000 T environment 40008000 T env_size
- 4000c000 T redundand_environment 40008004 T redundand_environment
- 40010000 T env_size 4000c004 T environment
- Note: this patch fixes just the first part, and cures the alignment
- problem by making sure that "env_size" gets placed correctly. However,
- we still have a potential issue because primary and redundant
- environment sectors are actually swapped, i. e. we have now:
- 40008000 T redundand_environment
- 4000c000 T environment
- 40010000 T env_size
- This shall be fixed in the next version.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit eb6da8050797c204c9d010548424186c7ce32fc1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Sep 16 02:39:35 2007 +0200
- TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cd2d1602c54cc6957bdef3872272a4b264893960
- Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
- Date: Mon Sep 10 14:54:56 2007 -0400
- Typo fix in tsec.c
- Fixup for the break statement in wrong place.
- [Patch by urwithsughosh@gmail.com]
- Acked-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 11 17:04:00 2007 +0200
- Fix do_div() usage in nand process output
- Fix usage of do_div() in nand erase|read|write process output.
- The last patch to nand_util.c introduced do_div() instead of libgcc's
- implementation. But do_div() returns the quotient in its first
- macro parameter and not as result.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c750d2e6692a000a82f29de7bf24e3dc21239161
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Sep 12 12:36:53 2007 +0200
- NAND: Add CFG_NAND_QUIET option
- This config option sets the default for the progress information
- output behavior that can also be configured through the 'quiet'
- environment variable.
- The legacy NAND code does not print the current progress info
- on the console. So this option is for backward compatibility for
- units that are in the field and where setting the quiet variable
- is not an option. With CFG_NAND_QUIET set to '1' the console
- progress info is turned off. This can still be overwritten
- through the environment variable.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit dcb88630290d2bcd803386dd4c2be73142994c4f
- Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
- Date: Thu Sep 13 16:06:05 2007 -0700
- ColdFire: fix build error becasue of bad type of mii_init()
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
- Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
- Date: Thu Sep 13 16:04:05 2007 -0700
- ColdFire: Fix build error caused by pixis.c
- Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit e21659e30660a1377c42af135a6114efe39801d9
- Author: Sam Sparks <SSparks@twacs.com>
- Date: Fri Sep 14 11:14:42 2007 -0600
- Update MPC8349ITX*_config to place config.tmp in right place.
- MPC834ITX*_config does not store config.tmp at the correct locatation,
- causing MPC8349ITXGP to have the wrong TEXT_BASE.
- Signed-off-by: Sam Sparks <SSparks@twacs.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 1218abf1b5817a39a82399b4b928b00750575bda
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Sep 15 20:48:41 2007 +0200
- Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 66b3f24d665be678a9dbb125b1e84185400f63b5
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Sat Sep 15 11:55:42 2007 +0200
- Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
- As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
- function local.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
- commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Sep 15 00:03:35 2007 +0200
- Synchronize with U-BOOT mainline
- commit d7fee32b7e61fe11c64e371cde79faa4768e8350
- Author: Sam Sparks <SSparks@twacs.com>
- Date: Fri Sep 14 11:14:42 2007 -0600
- Update MPC8349ITX*_config to place config.tmp in right place.
- MPC834ITX*_config does not store config.tmp at the correct locatation,
- causing MPC8349ITXGP to have the wrong TEXT_BASE.
- Signed-off-by: Sam Sparks <SSparks@twacs.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Sep 13 18:21:48 2007 +0200
- cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Sep 13 16:33:59 2007 +0200
- tqm5200: Restore customary env. variable boot commands for powerpc kernels
- - update default definitions of kernel_addr and fdt_addr env. variables
- - make arch/powerpc booting the default scenario
- - update MTD partition layout to match the above
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit f34024d4a328e6edd906456da98d2c537155c4f7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Sep 12 00:48:57 2007 +0200
- Fix memory corruption problem on STX GP3 SSA Board.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 11 15:35:01 2007 +0100
- Final tidy
- commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Sep 11 15:42:11 2007 +0200
- [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
- scan on second pci bus.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Sep 11 12:57:52 2007 +0200
- [ppc4xx] Individual handling of sdram.c for bamboo_nand build
- Bamboo has a file sdram.c which needs special treatment when building in
- separate directory. It has to be linked to build directory otherwise it is
- not seen.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit d45963854eff39d575124d859419bb4953ce2c87
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue Sep 11 00:37:04 2007 +0200
- [FIX] Microblaze ML401 - repare FLASH handling
- commit 38c1ef728d19950414a8ab1ccfc53767848fa346
- Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
- Date: Mon Sep 10 16:55:59 2007 +0100
- Allocate CPU Architecture Code for STMicroelectronics' ST200.
- Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
- ---------------------------------------------------
- commit 754bac48156f8958d8f6a53a51eda88ab5758929
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 10 20:42:31 2007 +0200
- Update version to match current state.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Mon Sep 10 17:39:08 2007 +0200
- [MPC512x] Streamline frame handling in the FEC driver
- - convert frame size settings to be derived from a single base
- - set frame size to the recommended default value
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Sep 10 11:34:00 2007 +0900
- Remove compiler warning: target CPU does not support interworking
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Sep 9 21:21:33 2007 +0200
- Fix compile error in spc1920 config.
- Signed-off-by: Markus Klotzbücher <mk@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Fri Sep 7 09:25:07 2007 -0600
- Bugfix: make bootm+libfdt compile on boards with no flash
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Sep 7 18:35:37 2007 +0200
- [PPC440SPe] PCIe environment settings for Katmai and Yucca
- - 'pciconfighost' is set by default in order to be able to scan bridges
- behind the primary host/PCIe
- - 'pciscandelay' env variable is recognized to allow for user-controlled
- delay before the PCIe bus enumeration; some peripheral devices require a
- significant delay before they can be scanned (e.g. LSI8408E); without the
- delay they are not detected
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 7f1913938984ef6c6a46cb53e003719196d9c5de
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Sep 7 18:20:23 2007 +0200
- [PPC440SPe] Improve PCIe configuration space access
- - correct configuration space mapping
- - correct bus numbering
- - better access to config space
- Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
- first device on the first bus. We now allow to configure up to 16 buses;
- also, scanning for devices behind the PCIe-PCIe bridge is supported, so
- peripheral devices farther in hierarchy can be identified.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Sep 7 17:46:18 2007 +0200
- [PPC440SPe] Convert machine check exceptions handling
- Convert using fixup mechanism to suppressing MCK for the duration of config
- read/write transaction: while fixups work fine with the case of a precise
- exception, we identified a major drawback with this approach when there's
- an imprecise case. In this scenario there is the following race condition:
- the fixup is (by design) set to catch the instruction following the one
- actually causing the exception; if an interrupt (e.g. decrementer) happens
- between those two instructions, the ISR code is executed before the fixup
- handler the machine check is no longer protected by the fixup handler as it
- appears as within the ISR code. In consequence the fixup approach is being
- phased out and replaced with explicit suppressing of MCK during a PCIe
- config read/write cycle.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit ff7640c9ead8806b5d827f2b29f9cb2632add729
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Sep 7 17:43:36 2007 +0200
- Fix typo in MAKEALL script.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Sep 7 17:09:21 2007 +0200
- [MPC512x] Proper handling of larger frames in the FEC driver
- When frame larger than local RX buffer is received, it is split and handled
- by two buffer descriptors. Prior to this patch the FEC driver discarded
- contents of a buffer descriptor without the 'LAST' bit set, so the first
- part of the frame was lost in case of larger frames. This fix allows to
- safely combine the two pieces into the whole frame.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Fri Sep 7 17:05:36 2007 +0200
- [MPC512x] Correct fixup relocation
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit a89cbbd27a60e6740772000fd0688ffba1c2576a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Sep 7 01:21:25 2007 +0200
- Update CHANGELOG, minor coding style cleanup.
- commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
- Author: stefano babic <sbabic@denx.de>
- Date: Thu Aug 30 23:01:49 2007 +0200
- PXA270: Added support for TrizepsIV board.
- This patch add support for the Trizeps IV module (520Mhz).
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
- Author: stefano babic <sbabic@denx.de>
- Date: Thu Aug 30 22:57:04 2007 +0200
- PXA270: Add support for multiple serial ports.
- This patch adds support for multiple serial ports to the PXA target.
- FFUART, BTUART and STUART are supported.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
- Author: stefano babic <sbabic@denx.de>
- Date: Thu Aug 30 22:48:47 2007 +0200
- PXA270: fix compile issue (invalid lvalue)
- Code is broken for PXA270 due to "invalid lvalue in assignment".
- This patch fix it in pxa-regs.h
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Thu Aug 30 18:19:05 2007 +0800
- Add BUILD_DIR support for bios emulator.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit b4d8a55145442f136982634862341a3e02002bda
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Fri Aug 31 14:41:51 2007 +0900
- [MIPS] Remove inline asm string functions
- Stop using inline string functions on MIPS as other ARCHs do so,
- since the optimized inline asm versions are not small.
- This change is triggered by a following MIPS build error:
- common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
- common/exports.c:32: undefined reference to `strcmp'
- make: *** [u-boot] Error 1
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Fri Aug 31 14:41:45 2007 +0900
- [MIPS] Update asm string header
- This patches contains several bugfixes and cleanups in the latest upstream:
- - Don't include linux/config.h
- - Remove buggy inline version of memscan.
- - Merge with Linux 2.6.11-rc3.
- - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
- - Goodbye mips64. 31704 lines of code bite the dust.
- - Replace extern inline with static inline.
- - Fix return value of strncpy.
- - Remove a bunch more "$1" clobbers.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Sep 4 17:31:22 2007 +0200
- Fix do_bootm_linux() so that multi-file images with FDT blob boot.
- Fix incorrect blob address calculation in do_bootm_linux() that prevents
- booting the kernel from a multi-file image (kernel + initrd + blob).
- Also, make minor updates to the U-Boot's output and to the coding style.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 041a2554ad619e80dce520c1a33210affcb6a3f2
- Author: Gary Jennejohn <gary.jennejohn@freenet.de>
- Date: Fri Aug 31 14:29:04 2007 +0200
- Add support for Sil680 IDE controller.
- o add drivers/sil680.c to support the Sil680 IDE-controller.
- o drivers/Makefile: add sil680.o.
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- commit e79021223bc339df655e360645a52c457a74b067
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Sep 6 09:47:40 2007 -0600
- bootm/fdt: Only process the fdt if an fdt address was provided
- Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
- kernels using the board info structure (instead of passing a device tree)
- This change allows the old style booting to be used if the fdt argument
- was not passed to 'bootm'.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Sep 6 09:46:23 2007 -0600
- Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
- Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
- Tested on: lite5200b
- Note: the fixup functions have not been moved to a common place. This
- patch is targeted for immediate merging as in solves a build issue, but
- the final name/location of the fixups is still subject to debate. I
- propose to merge this now, and move the fixups in the next merge window
- to be usable by all targets.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 41bb76e941929f54a73206fb132f7a4c275543a3
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Sep 6 09:46:17 2007 -0600
- libfdt: add convenience function fdt_find_and_setprop()
- Given the path to a node, fdt_find_and_setprop() allows a property value
- to be set directly.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 80767a6cead9990d9e77e62be947843c2c72f469
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed Sep 5 16:04:41 2007 +0100
- Changed API name to coloured_led.h
- Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
- Tidied other cpu/arm920t/start.S code
- commit 56a9270521baaa00e12639a978302a67f61ef060
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 30 16:18:18 2007 -0500
- Fix ULI RTC support on MPC8544 DS
- The RTC on the M1575 ULI chipset requires a dummy read before
- we are able to talk to the RTC. We accomplish this by adding a
- second memory region to the PHB the ULI is on and read from it.
- The second region is added to maintain compatiabilty with Linux's
- view of the PCI memory map.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Thu Aug 30 01:58:48 2007 -0500
- ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
- pcie is now differentiated from pci. Add 8641 bus-range updates.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 4 16:18:38 2007 +0100
- Add coloured led interface for ARM boards.
- Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
- commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 4 14:49:28 2007 +0100
- Move include/led.h to board/at91rm9200dk
- commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 4 14:25:51 2007 +0100
- Ran Lindent on drivers/at45.c
- commit 557ab89d294f08dd532f21d19861b40093200a33
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 4 14:23:50 2007 +0100
- Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
- commit 81b73dec16fd1227369a191e725e10044a9d56b8
- Author: Gary Jennejohn <garyj@denx.de>
- Date: Fri Aug 31 15:21:46 2007 +0200
- ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
- The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
- set to non-zero, because it doesn't support MRM (memory-read-
- multiple) correctly. We now added the possibility to configure
- this register in the board config file, so that the default value
- of 8 can be overridden.
- Here the details of this patch:
- o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
- board-specific settings. As an example the sequoia board requires 0.
- Idea from Stefan Roese <sr@denx.de>.
- o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
- PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
- o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
- CFG_PCI_CACHE_LINE_SIZE to 0.
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 60174746c668b309378a91488dded898e9553eae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Aug 31 10:01:51 2007 +0200
- Fix TFTP OACK code for short packets.
- The old code had a loop limit overflow bug which caused a semi-
- infinite loop for small packets, because in "i<len-8", "i" was signed,
- but "len" was unsigned, and "len-8" became a huge number for small
- values of "len".
- This is a workaround which replaces broken commit 8f1bc284.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
- Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Date: Thu Aug 30 15:03:05 2007 +0200
- Reduce BOOTDELAY variable to 1 second by default for STK1002
- Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
- Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Date: Thu Aug 30 15:03:04 2007 +0200
- Remove double quotation marks around MAC address for STK1002
- Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit ff13ac8c7bbebb238e339592de765c546dba1073
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 30 14:42:15 2007 +0200
- Backout commit 8f1bc284 as it causes TFTP to fail.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Thu Aug 30 02:26:17 2007 -0500
- Revert "Fix MPC8544DS PCIe3 scsi."
- This reverts commit 9468e680.
- Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Wed Aug 29 18:26:24 2007 -0600
- tftp: don't implicity trust the format of recevied packets
- The TFTP OACK code trusts that the incoming packet is formated as
- ASCII text and can be processed by string functions. It also has a
- loop limit overflow bug where if the packet length is less than 8, it
- ends up looping over *all* of memory to find the 'blksize' string.
- This patch solves the problem by forcing the packet to be null
- terminated and using strstr() to search for the sub string.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 29 16:31:18 2007 +0200
- ppc4xx: Change lwmon5 default environment to support Linux RTC
- The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
- to supply the RTC I2C address as bootline parameter. This patch
- adds support for this rtc probing parameter to the bootargs:
- "rtc-pcf8563.probe=0,0x51"
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 29 09:06:05 2007 -0500
- sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
- this had slipped through the cracks, since the sbc board was added
- after I wrote the original patch to remove all these symbols, and
- before it was merged.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Aug 29 14:05:30 2007 +0200
- Add mii_init() prototype
- to get rid of a *lot* of compiler warnings.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Aug 29 13:35:03 2007 +0200
- Disable network support on cmi_mpc5xx board
- ..because it caused compiler errors and there seems to be no
- board maintainer to take care of this.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Aug 20 09:44:00 2007 -0500
- Fix MPC8544DS PCIe3 scsi.
- <ed.swarthout@freescale.com>
- The problem is pciauto_setup_device() getting called from fsl_pci_init.c
- is allocating memory space it doesn't need.
- Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Tue Aug 21 09:38:59 2007 -0500
- 8548cds fixes
- Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
- correct consoledev needed for linux boot.
- Standardize on fdt{file,addr} var to hold dtb file name.
- Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Thu Aug 23 15:20:54 2007 -0400
- Enable L2 cache for MPC8568MDS board
- The L2 cache size is 512KB for 8568, print out the correct informaiton.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Wed Aug 22 17:54:49 2007 +0800
- Remove the bios emulator binary files from MAI board
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Aug 21 17:00:17 2007 -0500
- support board vendor-common makefiles
- if a board/$(VENDOR)/common/Makefile exists, build it.
- also add the first such case, board/freescale/common/Makefile, to
- handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
- dictated by board configuration.
- thusly get rid of alternate build dir errors such as:
- FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
- by putting the common/ mkdir command in its proper place (the common
- Makefile). Common bits from existing individual board Makefiles have
- been removed.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
- Author: stefano babic <sbabic@denx.de>
- Date: Tue Aug 21 15:52:33 2007 +0200
- Fix: TFTP is not working on little endian systems
- TFTP does not work anymore after multicast tftp
- patch was applied on little endian systems.
- This patch fix it.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 5f470948570526e9186f053a3003da7719604e90
- Author: stefano babic <sbabic@denx.de>
- Date: Tue Aug 21 15:50:33 2007 +0200
- Fix MAC address setting in DM9000 driver.
- The logic to check if there is a correct MAC address in the DM9000
- EEPROM, added in the last patch, is wrong. Now the MAC address is
- always taken from the environment, even if a suitable MAC is present
- in the EEPROM.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Tue Aug 21 12:40:34 2007 +0200
- MPC5xxx: fix some compiler warnings in USB code
- Fix the following warnings:
- - usb.c:xx: warning: function declaration isn't a prototype
- - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
- from pointer wihtout a cast
- Signed-off-by: Martin Krause <martin.krase@tqs.de>
- commit 16e23c3f5dab6937f5109365416808c7f15c122b
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Mon Aug 20 23:55:33 2007 -0500
- fsl_pci_init - Remove self PCSRBAR allocation
- CPU physical address space was being wasted by allocating a
- PCSRBAR PCI inbound region to it's memory space.
- As a rule, PCSRBAR should be left alone since it does not affect
- transactions from self and other masters may have changed it.
- Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
- commit 0e700ce03a23bb1921149bc77008ace7103d5289
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Aug 20 13:56:47 2007 +0200
- Fix compiler warning in include/s3c2410.h
- This patch fixes the "type qualifiers ignored on fuction return tpye"
- warning for include/s3c2410.h
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Mon Aug 20 07:09:05 2007 +0200
- Fix compilation error for omap2420h4_config.
- omap2420h4 switched to cfi, so remove old (already disabled) flash.c
- and flash_probe() calls in env_flash.c.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Aug 10 14:34:14 2007 -0500
- fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
- and make some minor corrections to the FDT part of the README.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Aug 29 01:32:05 2007 +0200
- Minor coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Tue Aug 28 17:40:33 2007 +0200
- [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit f98984cb194bb34dbe1db9429d3b51133af30d07
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Tue Aug 28 17:39:14 2007 +0200
- IDE: - make ide_inb () and ide_outb () "weak", so boards can
- define there own I/O functions.
- (Needed for the pcs440ep board).
- - The default I/O Functions are again 8 Bit accesses.
- - Added CONFIG_CMD_IDE for the pcs440ep Board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
- Author: Semih Hazar <semih.hazar@indefia.com>
- Date: Mon Aug 20 19:00:01 2007 +0300
- AVR32: Change prototype of memset
- Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9c02defc29b57945b600714cf61ddfd02b02fb14
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Sat Aug 25 05:07:16 2007 +0200
- POST: limit memory test area to not touch global data anymore
- As experienced on lwmon5, on some boards the POST memory test can
- corrupt the global data buffer (bd). This patch fixes this issue
- by checking and limiting this area.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 75e1a84d483e36be10e206e539b028c4889e1158
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 24 15:41:42 2007 +0200
- ppc4xx: Add RTC POST test to lwmon5 board configuration
- Since this RTC POST test is taking quite a while to complete
- it's only initiated upon special keypress same as the complete
- memory POST.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d7bfa620037a6d2210159387571bdf93aa32c162
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 24 15:19:10 2007 +0200
- ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 23 11:02:37 2007 +0200
- ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
- This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
- board. Now the "eeprom" command can be used to read/write from/to this
- device. Additionally a new command was added "eepromwp" to en-/disable
- the write-protect of this 2nd EEPROM.
- The 1st EEPROM is not affected by this write-protect command.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c64fb30e4c5976007d56fc1789c7a0666082b536
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 22 08:56:09 2007 +0200
- ppc4xx: Remove unused option CFG_INIT_RAM_OCM
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 21 16:27:57 2007 +0200
- ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
- This patch adds support for the matrix keyboard on the lwmon5 board.
- Since the implementation in the dsPCI is kind of compatible with the
- "old" lwmon board, most of the code is copied from the lwmon
- board directory.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 19 10:27:34 2007 +0200
- Fix some build errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Aug 18 22:00:38 2007 +0200
- Update CHANGELOG.
- commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Aug 16 22:52:39 2007 -0500
- lib_ppc: make board_add_ram_info weak
- platforms wishing to display RAM diagnostics in addition to size,
- can do so, on one line, in their own board_add_ram_info()
- implementation.
- this consequently eliminates CONFIG_ADD_RAM_INFO.
- Thanks to Stefan for the hint.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Fri Aug 17 12:43:44 2007 +0900
- PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
- This patch has been sent on:
- - 6 Jun 2007
- Many users of PCI config read routines tend to ignore the function
- ret value, and are only concerned about the contents of *val. Based
- on this, pci_hose_read_config_{byte,word}_via_dword should initialize
- the *val on dword read error.
- Without this fix, for example, we'll go on scanning bus with vendor or
- header_type uninitialized. This brings many unnecessary config trials.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Aug 18 14:37:52 2007 +0200
- ColdFire: Fix some remaining problems with CFG_CMD_
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8280f6a1c43247616b68224675188e5ccd124650
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Aug 18 14:33:02 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 16 19:23:50 2007 -0500
- ColdFire: Add M5235EVB Platform for MCF523x
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Aug 17 09:30:00 2007 -0500
- mpc83xx: fix typo in DDR2 programming
- introduced in the implement board_add_ram_info patch as I was cleaning out the
- magic numbers. sorry.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e58fe95784d2514fc9c21028dc59f2b319a35d80
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Aug 16 22:53:09 2007 -0500
- mpc83xx: move freescale boards to boards/freescale
- includes build fixes.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Aug 16 22:52:59 2007 -0500
- mpc83xx: suppress unused variable 'val8' warning
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit bbea46f76f767b919070b4829bf34c86bd223248
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Aug 16 22:52:48 2007 -0500
- mpc83xx: implement board_add_ram_info
- add board_add_ram_info, to make memory diagnostic output more
- consistent. u-boot banner output now looks like:
- DRAM: 256 MB (DDR1, 64-bit, ECC on)
- and for boards with SDRAM on the local bus, a line such as this is
- added:
- SDRAM: 64 MB (local bus)
- also replaced some magic numbers with their equivalent define names.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 14778585d1389d86d5846efec29e5fce892680ce
- Author: Tony Li <tony.li@freescale.com>
- Date: Fri Aug 17 10:35:59 2007 +0800
- mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
- The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
- And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
- Signed-off-by Tony Li <tony.li@freescale.com>
- commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 16 15:05:11 2007 -0500
- ColdFire: Add M54455EVB for MCF5445x
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 16 13:20:50 2007 -0500
- ColdFire: Add M5253EVBE platform for MCF52x2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit a605aacd8324094199402816cc6d9124aba57b8d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 16 05:04:31 2007 -0500
- ColdFire: Add M5249EVB platform for MCF52x2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 20:32:06 2007 -0500
- ColdFire: Update Freescale MCF52x2 platforms
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:55:10 2007 -0500
- ColdFire: Update EB+MCF-EV123 platform
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:46:38 2007 -0500
- ColdFire: update TASREG platform for MCF52x2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:45:51 2007 -0500
- ColdFire: update r5200 platform for MCF52x2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:43:20 2007 -0500
- ColdFire: idmr platform MCF52x2 update
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:41:06 2007 -0500
- ColdFire: cobra5272 platform for MCF52x2 update
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 56115665b4a64c10c01440c57749b265e0908fa4
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:38:15 2007 -0500
- ColdFire: MCF52x2 Header files update
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:21:21 2007 -0500
- ColdFire: MCF52x2 update
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 18:46:11 2007 -0500
- ColdFire: MCF5329 update cache
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 7171977fb8fd77cfb6676953fa9a05789c450513
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 15:40:20 2007 -0500
- ColdFire: MCF5329 header file clean up
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 15:39:17 2007 -0500
- ColdFire: MCF5329 Update and cleanup
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 10327dc5541f947c0cf7e31fef86c4706169607a
- Author: Andy Fleming <afleming@freescale.com>
- Date: Thu Aug 16 16:35:02 2007 -0500
- Add CONFIG_HAS_ETH0 to all boards with TSEC
- The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
- to update TSEC1's device-tree node, so we need to add it
- to all the boards with TSECs. Do this for 83xx and 86xx, too,
- since they will eventually do something similar.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 16 15:05:04 2007 -0500
- Update MPC8544 DS PCI memory map
- The PCIe bus that the ULI M1575 is connected to has no possible way of
- needing more than the fixed amount of IO & Memory space needed by the ULI.
- So make it use far less IO & memory space and have it use the shared LAW. This
- free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
- by each bus.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ea5877e31ed63ade948fd1293895ec23fe01472e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 16 11:01:21 2007 -0500
- Fix up some fdt issues on 8544DS
- It looks like we had a merge issue that duplicated a bit of code
- in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
- the MAC address properly set in the device tree on boot for TSEC1
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Thu Aug 16 15:16:03 2007 +0200
- PPC4xx:HCU4/5 cleanup
- Minor cleanups to confirm to the u-boot coding style.
- Some german expressions -> english.
- HCU5 enforces a unique IP adress for a given slot in the rack.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Thu Aug 16 15:16:02 2007 +0200
- PPC4xx:HCU4/5 cleanup ecc/sdram init
- Make ecc initialisation robust, as DDR2-ECC errors may be generated
- while zeroing the RAM.
- Return 16 bytes (a cacheline) less than the available memory, as the
- board and/or PPC440EPx might have problems accessing the last bytes.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit d35b508a55508535b6e8445b718585d27df733d3
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:29:56 2007 -0500
- fdt: suppress unused variable 'bd' warning
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 82bd9ee77490588d4da785d75829ca63d0176baf
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:06:50 2007 -0500
- Fix warnings from of_data copy fix
- Forgot to cast of_flat_tree to ulong.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7613afda77d5eec0f47d303025b0c661b70e4c73
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:03:44 2007 -0500
- Don't wait for disconnected TSECs
- The TSEC driver's PHY code waits a long time for autonegotiation to
- complete, even if the link is down. The PHY knows the link is
- down or up before autonegotiation completes, so we can short-circuit
- the process if the link is down.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b96c83d4ae475a70ef2635cd0e748174c44c8601
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:03:34 2007 -0500
- Fix numerous bugs in the 8568 UEC support
- Actually, fixed a large bug in the UEC for *all* platforms.
- How did this ever work?
- uec_init() did not follow the spec for eth_init(), and returned
- 0 on success. Switch it to return the link like tsec_init()
- (and 0 on error)
- The immap for the 8568 was defined based on MPC8568, rather than
- CONFIG_MPC8568
- CONFIG_QE was off
- CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
- Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
- enabled
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 3a79013e2adda53332dfd0b511066a805e929a9d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:03:25 2007 -0500
- Define tsec flag values in config files
- The tsec_info structure and array has a "flags" field for each
- ethernet controller. This field is the only reason there are
- settings. Switch to defining TSECn_FLAGS for each controller
- in the config header, and we can greatly simplify the array, and
- also simplify the addition of future boards.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit ec7238229507e7f47533a611ea8c53319d234cf3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:03:13 2007 -0500
- Add support for building all boards with a TSEC
- Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
- Now we can do a MAKEALL test on all of them!
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 17:30:56 2007 -0500
- Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
- The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
- neglected to *also* put the code inside the similar #ifdef
- for CONFIG_OF_FLAT_TREE.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 78f9fef7f406078c8bf7191e665a73f795157746
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 15 15:46:46 2007 -0500
- mpc885ads: Don't define CONFIG_BZIP2.
- bzip2 requires a significant chunk of malloc space, and there isn't
- enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
- and a downloaded image at 0x400000.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 002275a3ed8b114885f6702d6d544d0780dfe689
- Author: Michal Simek <Monstr@seznam.cz>
- Date: Thu Aug 16 08:54:10 2007 +0200
- Bios emulator - fix microblaze toolchain problem
- microblaze CPU have problem with bios_emulator code.
- Microblaze toolchain doesn't support PRAGMA PACK.
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 16 11:51:04 2007 +0200
- Minor Coding Style fix; Update CHANGELOG file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 16 11:21:49 2007 +0200
- ppc4xx: Remove #warning in esd auto_update.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2d78074d2e806edc380c1464eb9e5df335ece65e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 22 17:32:28 2007 +0200
- ppc7xx: Update CPCI750 board
- This small CPCI750 update extends the board specific command
- "show_config" to display the Marvell strapping registers and
- extends the PCI IDE controller.
- Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Thu Aug 16 10:46:28 2007 +0200
- [FIX] Changes for bios_emulator code for others architecture
- commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
- Author: Michal Simek <monstr@monstr.eu>
- Date: Thu Aug 16 10:45:09 2007 +0200
- [FIX] Remove unused include file
- commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 16 10:18:33 2007 +0200
- ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 16 09:54:51 2007 +0200
- Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 02ba7022f62bb75908296c58c63866e1d294b69a
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 16 09:52:29 2007 +0200
- ppc4xx: Update Sequoia/Rainier bootstrap command
- As suggested by David Mitchell, here an update for the Sequoia/Rainier
- bootstrap command.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 35cc4e4823668e8745854899cfaedd4489beb0ef
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:39 2007 -0500
- mpc83xx: enable libfdt by default on freescale boards
- this enables libfdt code by default for the
- freescale mpc8313erdb, mpc832xemds, mpc8349emds,
- mpc8349itx and gp boards.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3fde9e8b22cfbd7af489214758f9839a206576cb
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:33 2007 -0500
- mpc83xx: migrate remaining freescale boards to libfdt
- this adds libfdt support code for the freescale
- mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
- and gp boards.
- Boards remain compatible with OF_FLAT_TREE.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:26 2007 -0500
- mpc83xx: move common /memory node update mechanism to cpu.c
- also adds common prototypes to include/common.h.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:19 2007 -0500
- mpc83xx: remaining 8360 libfdt fixes
- PCI clocks and QE frequencies weren't being updated, and the core clock
- was being updated incorrectly. This patch also adds a /memory node if
- it doesn't already exist prior to update.
- plus some cosmetic trimming to single line comments.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:12 2007 -0500
- mpc83xx: fix UEC2->1 typo in libfdt setup code
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:05 2007 -0500
- mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
- and reorder the existing 83xx maintainers alpha.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5b4de9309d7a03aa1db2e5391ab696363391f460
- Author: Michal Simek <monstr@monstr.eu>
- Date: Wed Aug 15 21:15:05 2007 +0200
- [FIX] Resolve problem with warnings
- microblaze toolchain don't support PRAGMA PACK.
- commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
- Author: Michal Simek <monstr@monstr.eu>
- Date: Wed Aug 15 21:05:07 2007 +0200
- [FIX] Correction command setting for Microblaze boards
- commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
- Author: Michal Simek <monstr@monstr.eu>
- Date: Wed Aug 15 21:03:41 2007 +0200
- [FIX] Correction command definition
- commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 15 11:55:35 2007 -0500
- 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
- Remove a leftover in net/tftp.c while we're at it.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 15 12:20:40 2007 -0500
- Move the MPC8641HPCN board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8662577fe36fdb6a44b55b998d9daac6392a736a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 15 11:46:22 2007 -0500
- 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
- Remove a leftover in net/tftp.c while we're at it.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 210f463c71917b7a4495c2103c228b9c179ae64d
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Wed Aug 15 11:13:15 2007 -0400
- Fix where the #ifdef CFG_BOOTMAPSZ is placed.
- Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
- interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
- when it should have gone inside of the conditional. As a result, it
- broke non-LIBFDT board builds.
- Also added a missing "not." to the comment.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 0e19209767194a97cec6d93dba9e64d1da8d548e
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Aug 15 12:14:23 2007 +0200
- PPC4xx:HCU4/5-Board fix compile warning
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Tue Aug 14 14:06:45 2007 -0500
- Fix malloc size error in ahci_init_one.
- Typically this causes scsi init to corrupt the
- devlist and break the coninfo command.
- Fix a compiler size warning.
- Signed-off-by: Jason Jin <jason.jin@freescale.com>
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit b361acd64fd2525c081b9b288b0804efe209c0e9
- Author: ksi@koi8.net <ksi@koi8.net>
- Date: Tue Aug 14 10:02:16 2007 -0700
- TI DaVinci - fix unsupported %hhx format
- Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
- commit f01dbb5424a81453c81190dd30e945891466f621
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 14 18:42:36 2007 +0200
- Coding style cleanup. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 10:32:59 2007 -0500
- Fix initrd/dtb interaction
- The original code would wrongly relocate the blob to be right before
- the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
- if it is defined. So we make two changes:
- 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
- 2) If the blob is being relocated, relocate it before kbd, not initrd
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit e54b970173769307a116bd34028b6d0c2eea2a4e
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 15:40:00 2007 +0100
- Supply spi interface in at45.c
- commit 4ce846ec59f36b85d6644a769690ad3feb667575
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 15:12:01 2007 +0200
- POST: Fix merge problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 15:03:17 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 779e975117a75e91fcebe226a63104dbfb924ab1
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 14:44:41 2007 +0200
- ppc4xx: Add initial Zeus (PPC405EP) board support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c5a172a5fd636c12467429e3f7910e53773979c6
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 14:41:55 2007 +0200
- POST: Add option for external ethernet loopback test
- When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
- is not done using an internal loopback connection, but by assuming
- that an external loopback connector is plugged into the board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit eb2b4010ae426245172988804ee8d9193fb41038
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 14:39:44 2007 +0200
- POST: Add ppc405 support to cache and UART POST
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:46:32 2007 +0100
- Replace lost end of at45.c.
- commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:30:06 2007 +0100
- Update Makefiles for merged and split at45.c.
- commit 3454cece2db57cb9eb7087995f7e73066a163f71
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:21:06 2007 +0100
- Delete the merged files.
- commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:14:05 2007 +0100
- Add the files.
- commit d4fc6012fd0a5c211b825691f44b06f8032c0551
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:10:52 2007 +0100
- Add MACH_TYPE records for several AT91 boards.
- Merge to two at45.c files into a common file, split to at45.c and spi.c
- Fix spelling error in DM9161 PHY Support.
- Initialize at91rm9200 board (and set LED).
- Add PIO control for at91rm9200dk LEDs and Mux.
- Change dataflash partition boundaries to be compatible with Linux 2.6.
- Signed-off-by: Peter Pearse <peter.pearse@arm.com>
- Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
- commit 4ef35e53c693556c54b0c22d6f873de87bade253
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 14 09:54:46 2007 +0200
- Coding style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 14 09:47:27 2007 +0200
- Coding style cleanup; rebuild CHANGELOG
- commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
- Author: Randy Vinson <rvinson@linuxbox.(none)>
- Date: Tue Feb 27 19:42:22 2007 -0700
- 85xxCDS: Add make targets for legacy systems.
- The PCI ID select values on the Arcadia main board differ depending
- on the version of the hardware. The standard configuration supports
- Rev 3.1. The legacy target supports Rev 2.x.
- Signed-off-by Randy Vinson <rvinson@mvista.com>
- commit e41094c7e38177c755fbd9b182018069614f080d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 01:50:09 2007 -0500
- 85xxCDS: Enable the VIA PCI-to-ISA bridge.
- Author: Randy Vinson <rvinson@linuxbox.(none)>
- Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
- Arcadia main board.
- Signed-off-by: Randy Vinson <rvinson@mvista.com>
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 00:14:25 2007 -0500
- Add support for UEC to 8568
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit c59e4091ffe0148398b9e9ff14a019ea038b7432
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Tue Jun 19 14:18:34 2007 -0400
- Add PCI support for MPC8568MDS board
- This patch is against u-boot-mpc85xx.git of www.denx.com
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
- commit d111d6382c99fdea08c2312eeeae8786945e189a
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Tue Jun 19 14:18:32 2007 -0400
- Empirically set cpo and clk_adjust for mpc85xx DDR2 support
- This patch is against u-boot-mpc85xx.git of www.denx.com
- Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
- both MPC8548CDS board and MPC8568MDS board, especially for supporting
- 533MHz DDR2.
- Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
- DDR2 on all current board versions especially ver 1.92 or later to bring
- up.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 3db0bef59eab1155801618cef5c481e97553b597
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 7 18:07:27 2007 -0500
- Use an absolute address when jumping out of 4k boot page
- On e500 when we leave the 4k boot page we should use an absolute address since
- we don't know where the board code may want us to be really running at.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Aug 13 14:49:59 2007 -0500
- MPC85xx BA bits not set for 3-bit bank address DIMM
- The current implementation does not set the number of bank address bits
- (BA) in the processor. The default assumes 2 logical bank bits. This
- works fine for a DIMM that uses devices with 4 internal banks (SPD
- byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
- devices with 8 internal banks (SPD byte17 = 0x8).
- Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
- commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Aug 13 14:38:06 2007 -0500
- Fix minor 85xx warnings
- Some patches had inserted warnings into the build:
- * mpc8560ads declared data without using it
- * cpu_init declared ecm and immap without using it in all CONFIGs
- * MPC8548CDS.h had its default filenames changed so that they contained
- "\m" in the paths. Made the defaults not Windows-specific (or
- anything-specific)
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit f2cff6b104f82b993bef6086ce0c97159bbe1add
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:52 2007 -0500
- 8548cds PCIE support.
- Make the early L1 cache stack region guarded to prevent speculative
- fetches outside the locked range.
- Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
- init.S whitespace cleanup.
- Allow TEXT_BASE value to be specified on command line. This allows it
- to be set to 0xfffc0000 which cuts the uboot binary in half.
- Clear and enable lbc and ecm errors.
- Update last_busno in device-tree for pci and pcie.
- Remove load of obsolete cpu/mpc85xx/pci.0
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:51 2007 -0500
- 8544ds PCIE support
- PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
- Enable LBC and ECM errors and clear error registers.
- Add tftpflash env var to get uboot from tftp server and flash it.
- Add pci/pcie convenience env vars to display register space:
- "run pcie3regs" to see all pcie3 ccsr registers
- "run pcie3cfg" to see all cfg registers
- Whitespace cleanup and MPC8544DS.h
- Enable CONFIG_INTERRUPTS.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 01:34:21 2007 -0500
- 85xx start.S cleanup and exception support
- From: Ed Swarthout <Ed.Swarthout@freescale.com>
- Support external interrupts from platform to eliminate system hangs.
- Define CONFIG_INTERRUPTS board configure option to enable.
- Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
- Remove extra cpu initialization redundant with hardware initialization.
- Whitespace cleanup.
- Define and use _START_OFFSET consistent with other processors using
- ppc_asm.tmpl
- Move additional code from .text to boot page to make room for
- exception vectors at start of image.
- Handle Machine Check, External and Critical exceptions.
- Fix e500 machine check error determination in traps.c
- TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 01:33:18 2007 -0500
- Add MPC8544DS README
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:48 2007 -0500
- 85xx allow debugger to configure ddr.
- Only check for mpc8548 rev 1 when compiled for 8548.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:47 2007 -0500
- mpc85xx L2 cache reporting and SRAM relocation option.
- Allow debugger to override flash cs0/cs1 settings to enable alternate
- boot regions
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:46 2007 -0500
- e500 needs ppc_asm.tmp MCK_EXCEPTION
- Always define MCK_EXCEPTION macro - so e500 can use it too.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 53a5c424bf8655b7b4e2c305a441963259a26a81
- Author: David Updegraff <dave@cray.com>
- Date: Mon Jun 11 10:41:07 2007 -0500
- multicast tftp: RFC2090
- Implemented IETF RFC2090, Multicast TFTP. Initial implementation
- on Realtek RTL8139 and Freescale TSEC.
- Signed-off-by: David Updegraff <dave@cray.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
- Author: Wilson Callan <wcallan@savantav.com>
- Date: Sat Jul 28 10:56:13 2007 -0400
- New CONFIG_BOOTP_SERVERIP option
- Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
- from the bootp server
- Signed-off-by: Wilson Callan <wcallan@savantav.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
- Author: Mike Rapoport <mike@compulab.co.il>
- Date: Sun Aug 12 08:48:27 2007 +0300
- Add ability to take MAC address from the environment to DM9000 driver
- Signed-off-by: Mike Rapoport <mike@compulab.co.il>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit be5d72d10d47609326226225181e301fb9a33b58
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 13 21:57:53 2007 +0200
- Minor coding style cleanup. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Sat Aug 11 06:54:58 2007 -0500
- Modify SBC8641D to use new Freescale PCI routines
- PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
- adapter.
- Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Signde-off-by: Jon Loeliger <jdl@freescale.com>
- commit a08458303e7f9db67f296980036d3292c35cb45c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Jun 29 18:38:51 2007 +0200
- atmel_mci: Fix data timeout value
- Calculate the data timeout based on values from the CSD instead of
- just using a hardcoded DTOR value. This is a backport of a similar fix
- in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
- instead of down.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Aug 13 17:22:31 2007 +0200
- AVR32: Include <div64.h> instead of <asm/div64.h>
- include/asm-avr32/div64.h was recently moved to include/div64.h, but
- cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
- the patch was merged perhaps?)
- This patch updates cpu/at32ap/interrupts.c so that the avr32 port
- compiles again.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Jun 27 13:34:26 2007 +0200
- atmel_mci: Use 512 byte blocksize if possible
- Instead of always using the largest blocksize the card supports, check
- if it can support smaller block sizes and use 512 bytes if possible.
- Most cards do support this, and other parts of u-boot seem to have
- trouble with block sizes different from 512 bytes.
- Also enable underrun/overrun protection.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Aug 13 09:05:33 2007 +0200
- ppc4xx: Fix problem in PLL clock calculation
- This patch was originall provided by David Mitchell <dmitchell@amcc.com>
- and fixes a bug in the PLL clock calculation.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 21:34:50 2007 +0200
- Update CHANGELOG
- commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 21:34:34 2007 +0200
- Minor alignment of output, 2nd try.
- Also update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6b309f22a724fad8418e811751a0741b893419cf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 20:35:49 2007 +0200
- Minor alignment of output
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 18:28:18 2007 +0200
- Cleanup output on ADS5121 board
- Signed-off-by: Wolfgang Denk
- commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 15:11:38 2007 +0200
- Adapt board configuration and fix kernel crash on MCC200 board.
- The update procedure was modified to turn off the USB subsystem
- before exit for MCC200 and TRAB. This is necessary as otherwise the
- USB controller continues to write periodically to system memory!
- MCC200-specific notes:
- - the patch disables the magic key check for MCC200
- - the patch contains the configuration changes made
- for the new revision of the board.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 14:47:54 2007 +0200
- Adjust default configuration of ADS5121 board.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 14:27:39 2007 +0200
- Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5fe6be6208dda852c3564e384bd78d75784dea3e
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Aug 7 21:14:22 2007 -0400
- Improve error print messages.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jul 17 13:57:04 2007 -0500
- fdt: allow for builds that don't want env and bd_t nodes
- protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
- area.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 91148bf7aeba142d6f348805db7625db7da64d6f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jul 17 13:56:53 2007 -0500
- fdt: do board setup based on fdt address specified on bootm line
- The last fdt patch to bootm did board setup based on the address
- specified by a prior fdt address command invocation. The bootm
- code, as its call to fdt_chosen does, should use the fdt specified
- by the user on the bootm command. Note this restores full
- functionality for the 8360's existing default boot environment
- values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
- before booting a kernel).
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e125a2ffc209dd34794e326c7175658253beadf3
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jul 10 20:40:39 2007 -0400
- Call ft_board_setup() from the bootm command.
- In the patch titled "Create new fdt boardsetup command..." I removed the
- call to ft_board_setup() from the routine fdt_chosen(), but I forgot
- to add a direct call back into cmd_bootm.c
- This fixes the oversight by adding the direct call to the bootm command.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jun 25 23:25:28 2007 -0400
- Create new fdt boardsetup command, fix bug parsing [] form of set values.
- Previously ft_board_setup() was called by fdt_chosen() which was not
- really correctly structured. This splits ft_board_setup() out by creating
- a new fdt boardsetup command.
- Fix a bug when parsing fdt set command values which have the square
- bracket form [00 11 22 33] - the length was updated incorrectly in when
- parsing that form.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 6f35ded9e85493595e0eb66a82b502a95326d049
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jun 25 20:55:58 2007 -0400
- Tighten up the error messages.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit c45874b05aae897a6c29d1a97d4bb708fca2756c
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jun 25 19:52:23 2007 -0400
- Asthetic improvements: error messages and line lengths.
- Tighten up the error messages, split overlength lines.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri May 25 22:08:57 2007 -0400
- Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
- The fdt_chosen() function was adding/seting some properties ad-hoc
- improperly and duplicated (poorly) what was done in ft_board_setup()
- Clean up long lines (setting properties, printing errors).
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 06e19a07701c968f15d72c083b5872a1a11c7b01
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon May 21 23:27:16 2007 -0400
- For fdt_find_node_by_path(), handle the root path properly.
- Also removes the special case root path detection in cmd_fdt.c since it
- is no longer necessary.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Thu May 17 23:54:36 2007 -0400
- Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 1a861169bc3758f9de3aead62b058736c6891246
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Jun 6 22:47:58 2007 -0400
- Replace fdt_node_offset() with fdt_find_node_by_path().
- The new name matches more closely the kernel's name, which is also
- a much better description.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed May 16 22:39:59 2007 -0400
- Fix cmd_fdt line lengths, refactor code.
- Break lines that were greater than 80 characters in length.
- Move the fdt print and property parsing code to separate static functions
- to reduce coding clutter in the fdt_cmd handling body.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 25114033ab21788810c48ba4df103b649da1223b
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat May 12 09:47:25 2007 -0400
- FDT command improvements.
- Fix "fdt set" so that it will create a non-existing property.
- Add "fdt mknode" to create nodes.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 38eb508e8e811e2e57628f445de3a24a23c7d804
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat May 12 09:45:46 2007 -0400
- Reorganize and fix problems (returns) in the bootm command.
- Do *NOT* return after the "point of no return" has been passed.
- If something goes wrong, the board must be reset after that point.
- Move the "Transferring control to Linux" debug message back to where it
- belongs: just before transferring control to linux.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 89c8757d8f213c47709bdc4efe0695263a6080a6
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue May 8 21:27:35 2007 -0400
- Fix bugs in the CONFIG_OF_LIBFDT
- Stupid coding mistakes (identified by Timur Tabi, thanks).
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Apr 25 22:47:15 2007 -0400
- Improve fdt move length handling.
- Make the length parameter optional: if not specified, do the move using
- the current size unchanged.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Apr 25 22:23:36 2007 -0400
- Minor code clean up.
- Declare the variable fdt properly as extern.
- Call the "set_fn" function pointer the "short way" without the full
- dereferencing syntax.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Apr 25 21:24:27 2007 -0400
- Improve error messages, more informative.
- Print more than the raw libfdt error message strings. This is especially
- useful for cluing in the user when the bootm command aborts due to
- blob problems.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Apr 20 22:46:53 2007 -0400
- libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
- This is the way u-boot reduces configured-out code. At Wolfgang
- Grandegger and Wolfgang Denk's request, make libfdt conform.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 923efd286411ed052d9e074f59f8986d6081061c
- Author: Bruce Adler <bruce.adler@ccpu.com>
- Date: Fri Aug 10 14:54:47 2007 -0700
- add image size and descriptors for Spartan 3E FPGA chips
- Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
- Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
- commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Aug 10 15:34:48 2007 -0500
- make MAKEALL more immune to merge conflicts
- ..by placing board entries one per line, as suggested by jdl.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Aug 10 13:28:25 2007 -0500
- README: Remove outdated cpu type, board type, and NAME_config lists
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 49bb59912d21aacb507eb81fd21fb7af650c706c
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Aug 10 15:48:59 2007 +0800
- mpc83xx: Suppress the warning 'burstlen'
- suppress the warning 'burstlen' of spd_sdram.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit c646bba6465a45c60746d4cc1602cd06c1960f2d
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Aug 9 15:11:03 2007 -0500
- Add support for SBC8641D. Config files.
- Add support for Wind River's SBC8641D reference board.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Acked-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 8ac273271d57321f90505c7a51cdb1ef2113b628
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Aug 9 15:10:53 2007 -0500
- Add support for SBC8641D. Board files.
- Add support for Wind River's SBC8641D reference board.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Acked-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit c2c0ab4aff86622b837a48a0e560351f9afafb95
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 10 20:34:58 2007 +0200
- Conding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
- Author: Sergey Kubushyn <ksi@koi8.net>
- Date: Fri Aug 10 20:26:18 2007 +0200
- [ARM] TI DaVinci support, hopefully final
- Add support for the following DaVinci boards:
- - DV_EVM
- - SCHMOOGIE
- - SONATA
- Changes:
- - Split into separate board directories
- - Removed changes to MTD_DEBUG (or whatever it's called)
- - New CONFIG_CMD party line followed
- - Some cosmetic fixes, cleanup etc.
- - Patches against the latest U-Boot tree as of now.
- - Fixed CONFIG_CMD_NET in net files.
- - Fixed CONFIG_CMD_EEPROM for schmoogie.
- - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
- DV_EVM. Can't check if it works on SONATA, don't have a board any more,
- but it at least compiles.
- Here is an excerpt from session log on SCHMOOGIE...
- U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
- DRAM: 128 MB
- NAND: 128 MiB
- In: serial
- Out: serial
- Err: serial
- ARM Clock : 297MHz
- DDR Clock : 162MHz
- ETH PHY : DP83848 @ 0x01
- U-Boot > iprobe
- Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
- U-Boot > ping 192.168.253.10
- host 192.168.253.10 is alive
- U-Boot >
- Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
- Acked-by: Dirk Behme <dirk.behme@gmail.com>
- Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:45 2007 -0500
- fsl_pci_init cleanup.
- Do not enable normal errors created during probe (master abort, perr,
- and pcie Invalid Configuration access).
- Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:44 2007 -0500
- pciauto_setup_device bars_num fix
- Passing bars_num=0 to pciauto_setup_device should assign no bars.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Aug 6 17:39:44 2007 -0500
- 8641hpcn: Do correct sized pointer math.
- When I rebased Ed's patch and cleaned up a few compilation
- problems, I apparently rebased my brain on crack first.
- Fix that by doing (char *) sized pointer math as needed.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cfc7a7f5bb3273c9951173c788001d45118f141f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Aug 2 14:42:20 2007 -0500
- cpu/86xx fixes.
- Remove rev 1 fixes.
- Always set PICGCR_MODE.
- Enable machine check and provide board config option
- to set and handle SoC error interrupts.
- Include MSSSR0 in error message.
- Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 10 10:42:25 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Thu Aug 2 17:42:08 2007 +0200
- Make use of generic 64bit division in nand_util.c
- Use generic 64bit division in nand_util.c. This makes nand_util.c
- independent of any toolchain 64bit division.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit f7c086e94e8ce9aad7268af97f73aa6884686f27
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Thu Aug 2 17:41:14 2007 +0200
- Move 64bit division from avr32 to generic lib
- Move the 64bit division from lib_avr32 to lib_generic. With this, all
- boards can do_div/__div64_32 if needed, not only avr one. Code is put
- to lib_generic, so no larger memory footprint if not used. No code
- modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:31:22 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:30:33 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit e8397fc78c9394d71de233a4d810fbc9047e4c76
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:38:26 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: common files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:28:44 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: make related
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 137fdd9f474ecb853efdace5200576308c67f18d
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:28:03 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:27:15 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:25:31 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: READMEs
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:37:40 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
- This series of patches adds support for 2 boards from Netstal Maschinen.
- The HCU4 has a PPC405Gpr and
- the HCU5 has a PPC440EPX.
- The HCU4 has a somehow complicated flash setup, as the booteprom is
- only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
- elegant solution.
- The HCU5 has only a booteprom as the whole code will be downloaded from a
- different board which has HD, CD-ROM, etc and where all code is stored.
- This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
- Thanks them a lot.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 10 08:42:55 2007 +0200
- ppc4xx: Update lwmon5 POST configuration
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Fri Aug 10 08:25:22 2007 +0200
- POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
- The patch adds support for UART POST on ppc44x-based boards with no
- external serial clocks installed.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Aug 6 18:18:34 2007 -0500
- mpc83xx: fix ITX[GP] O=builddir builds
- make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
- Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
- "BUILD_DIR=<some dir> ./MAKEALL ..."
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Aug 1 15:00:59 2007 +0800
- mpc83xx: Correct the README for DDR ECC
- Update the README for DDR ECC, change the name
- to README.mpc83xx.ddrecc.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Aug 1 15:00:15 2007 +0800
- mpc83xx: Consolidate the ECC support of 83xx
- Remove the duplicated source code of ecc command on the <board>.c,
- for reused, move these code to cpu/mpc83xx directory.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 036575c544cf1b69654d8fb334bda69c6ff3da36
- Author: Dave Liu <r63238@freescale.com>
- Date: Sat Aug 4 13:37:39 2007 +0800
- mpc83xx: Correct the burst length for DDR2 with 32 bits
- The burst length should be 4 for DDR2 with 32 bits bus
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jul 25 19:25:33 2007 -0500
- mpc83xx: add support for the MPC8323E RDB
- MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
- five 10/100 ethernet ports connected via an ICPlus IP175C
- switch, one PCI slot, and serial. Features not supported
- in this patch are SD card interface, 2 USB ports, and the
- two phone ports.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jul 25 19:25:28 2007 -0500
- mpc83xx: fixup generic pci for libfdt
- add libfdt support to the generic 83xx pci code
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f57ac7a7b37109245b69db80839ebee26179966a
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jul 25 19:25:22 2007 -0500
- mpc83xx: fix 8360 and cpu functions to update fdt being passed
- ..and not the global fdt. Rename local fdt vars to blob so as not to
- be confused with the global var with the same three-letter name.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Wed Jul 4 21:34:24 2007 -0400
- mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
- Several node strings were not correct (trailing slashes and properties
- in the strings)
- Added setting of the timebase-frequency.
- Improved error messages and use debug() instead of printf().
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 26d02c9bbac1751c5e19294f000100b48d43a920
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Wed Jul 4 21:27:30 2007 -0400
- mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
- The new name matches more closely the kernel's name, which is also
- a much better description.
- These are the mpc83xx changes made necessary by the function name change.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 9be39a67c9f8fef7107f5df09d673005f04d0963
- Author: Dave Liu <daveliu@freescale.com>
- Date: Mon Jun 25 10:41:56 2007 +0800
- mpc83xx: Add support for the display of reset status
- 83xx processor family has many reset sources, such as
- power on reset, software hard reset, software soft reset,
- JTAG, bus monitor, software watchdog, check stop reset,
- external hard reset, external software reset.
- sometimes, to figure out the fault of system, we need to
- know the cause of reset early before the prompt of
- u-boot present.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
- Author: Dave Liu <daveliu@freescale.com>
- Date: Mon Jun 25 10:41:04 2007 +0800
- mpc83xx: Fix the align bug of SDMA buffer
- According to the latest user manual, the SDMA temporary
- buffer base address must be 4KB aligned.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
- Author: Dave Liu <daveliu@freescale.com>
- Date: Mon Jun 25 13:21:12 2007 +0800
- mpc83xx: Revise the MPC8360EMDS readme doc
- When the rev2.x silicon mount on the MPC8360EMDS baord,
- and if you are using the u-boot version after the commit
- 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
- to make the ethernet interface usable, we have to setup
- the jumpers correctly.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Jul 3 13:46:32 2007 -0500
- FSL I2C driver programs the two I2C busses differently
- The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
- The second I2C bus has its slave address programmed incorrectly and is
- missing a 5-us delay.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Jul 3 13:04:34 2007 -0500
- Update SCCR programming in cpu_init_f() to support all 83xx processors
- Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
- bitfields for all 83xx processors. The code to update some bitfields was
- compiled only on some processors. Now, the bitfields are programmed as long
- as the corresponding CFG_SCCR option is defined in the board header file.
- This means that the board header file should not define any CFG_SCCR macros
- for bitfields that don't exist on that processor, otherwise the SCCR will be
- programmed incorrectly.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 9546266999f0b9b51372636614211b88d90f0f25
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Fri Jun 22 13:04:22 2007 +0200
- TQM834x: cleanup configuraton
- Remove irritating #undef DEBUG
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
- Author: david.saada <David.Saada@ecitele.com>
- Date: Mon Jun 18 09:09:53 2007 -0700
- MPC83xx: Fix makefile to generate config.h file in the build directory
- MPC83xx: Fix the Makefile config sections to generate the include/config.h
- file in the build directory instead of the source directory.
- Signed-off-by: David Saada <david.saada@ecitele.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
- Author: Lee Nipper <Lee.Nipper@freescale.com>
- Date: Thu Jun 14 20:07:33 2007 -0500
- mpc83xx: Add support for 8360 silicon revision 2.1
- This change adds 8360 silicon revision 2.1 support to u-boot.
- Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 8 04:14:28 2007 -0500
- Treat ppc64 host as ppc
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0dc4279b08ff82472bec2e2c90858602459febe8
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Wed Aug 8 09:01:46 2007 +0800
- Minor fix for bios emulator makefile
- Add $(obj) to LIB avoiding objects be built in the source dir
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Wed Aug 8 08:33:11 2007 +0800
- Add CONFIG_BIOSEMU define to guard all the bios emulator code
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- This patch fix the compile issue on the board that did not enable the bios emulator
- commit ed8106433522f2ea8933e9808346860d061d7731
- Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
- Date: Tue Jul 31 12:27:25 2007 -0500
- tsec: fix multiple PHY support
- The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
- broke multiple PHY support in tsec.c. This fixes it.
- Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Aug 9 09:08:18 2007 -0500
- tsec: Allow Ten Bit Interface address to be configurable
- Allow the address of the Ten Bit Interface (TBI) to be changed in the
- event of a conflict with another device.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 8 09:54:26 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a41de1f0d373e09c782dea558385a06247111ba5
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 05:15:18 2007 -0500
- Port enabled for I2C signals and chipselects port configuration.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 04:31:18 2007 -0500
- Added NAND support
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 04:11:20 2007 -0500
- Added I2C support
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 99c03c175d2689093176facf17c58ce2cb320001
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:58:52 2007 -0500
- Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:55:21 2007 -0500
- Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:43:30 2007 -0500
- Moved sync() from board file to include/asm-m68k/io.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:30:44 2007 -0500
- Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 9998bd37ead85e93953559720710d3b0685c81e6
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:19:10 2007 -0500
- Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Tue Aug 7 16:17:06 2007 +0800
- Add CONFIG_BIOSEMU define to guard all the bios emulator code
- This patch fix the compile issue on the board that did not enable the bios emulator
- commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 7 16:02:13 2007 +0200
- Fix missing brace error in fs/fat/fat.c
- [pointed out by Roderik Wildenburg]
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 706714d97a0d08d59eda4de2268c39f504688329
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Aug 6 23:41:53 2007 +0200
- [FIX] remove cute code
- commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Aug 6 23:35:26 2007 +0200
- [FIX] Fix romfs code
- commit ab4b956d3143f8f8174089053f5dfabbb04762b0
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Aug 6 23:31:49 2007 +0200
- [FIX] Coding style cleanup - Wolfgang's suggestions
- commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 6 23:21:05 2007 +0200
- Fixed typo in README (pointed out by Martin Jost).
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 537223afa61f64480df31ce440a9cb386df4a814
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Aug 6 21:10:17 2007 +0200
- ppc4xx: Update AMCC Bamboo README doc/README.bamboo
- As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
- here an updated Bamboo README.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 6 02:17:36 2007 +0200
- Coding style cleanup. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 221838cc7eb178370ff62aa05920a582e12ac322
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Tue Jul 10 09:03:22 2007 +0800
- Remove the bios emulator from MAI board.
- The bios emulator in the MAI board can not pass compile
- and have a lot of crap in it. remove it and will have a
- clean and small bios emulator in the drivers directory
- which can be uesed for every board.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 5618332409bb96f4448d1712899369fc80c0b489
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 13 12:14:59 2007 +0800
- Fix some compile issues for MAI board.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 0f460a1ee148b648ee242c3157650287d4296260
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 13 12:14:58 2007 +0800
- Configurations for ATI video card BIOS emulator
- This patch add definition of the BIOS emulator and the ATI framebuffer
- driver for MPC8641HPCN board.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit ece92f85053b8df613edcf05b26a416cbc3d629c
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 6 08:34:56 2007 +0800
- This is a BIOS emulator, porting from SciTech for u-boot, mainly for
- ATI video card BIOS. and can be used for x86 code emulation by some
- modifications.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 5072188acabde3178fac7f5a597150e6e74fd40c
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 6 08:33:33 2007 +0800
- This is a framebuffer driver for ATI video card, can work for PCI9200,
- X300, X700, X800 ATI video cards.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 5728be389e65fd47f34b33c2596271eb4db751ae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 6 01:01:49 2007 +0200
- Coding style cleanup. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8092fef4c29b395958bb649647da7e3775731517
- Author: Martin Krause <Martin.Krause@tqs.de>
- Date: Tue Dec 12 14:26:01 2006 +0100
- Add functions to list of exported functions
- Additionally export the following fuctions (to make trab_config build again):
- - simple_strtol()
- - strcmp()
- Also bump the ABI version to reflect this change
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 63cec5814fab5d2b1c86982327433807a5ac0249
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Thu Aug 2 14:09:49 2007 -0500
- Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
- All of the PCI/PCI-Express driver and initialization code that
- was in the MPC8641HPCN port has now been moved into the common
- drivers/fsl_pci_init.c. In a subsequent patch, this will be
- utilized by the 85xx ports as well.
- Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
- Also enable the second PCI-Express controller on 8641
- by getting its BATS and CFG_ setup right.
- Fixed a u16 vendor compiler warning in AHCI driver too.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a274ca4f6d68830e7c916f897561cff8c4101c38
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Aug 5 22:33:05 2007 +0200
- [FIX] Coding style cleanup
- commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Aug 5 16:13:31 2007 +0200
- [FIX] Xilinx Uartlite driver
- Because PPC405 can use UARTLITE serial interface and
- Microblaze can use Uart16550 serial interface not only Uartlite.
- commit 98889edd50aadf862071eb5664747ad0d568a20e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Aug 5 15:54:53 2007 +0200
- [FIX] Change configuration for XUPV2P Microblaze board
- commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Aug 5 15:53:50 2007 +0200
- [PATCH] Added support for Xilinx Emac community driver
- commit 86b116b1b1e165ca4840daefed36d2e3b8460173
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Aug 3 12:08:16 2007 +0200
- cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
- Add the ability for modules from the Schindler cm5200 family to use a
- single U-Boot image:
- - rename cm1_qp1 to cm5200
- - add run-time module detection
- - parametrize SDRAM configuration according to the module we are running on
- Few minor, board-specific fixes included in this patch:
- - better MAC address handling
- - updated default environment ('update' command uses +{filesize} now)
- - improved error messages in the auto-update code
- - allow booting U-Boot from RAM (CFG_RAMBOOT)
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Aug 3 04:05:25 2007 -0500
- Add Marvell 1149 PHY support to the TSEC
- commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 2 21:27:46 2007 +0200
- Coding style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 63e22764d2f8653f68888c667eb65b3996b52680
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 2 10:11:18 2007 +0200
- Minor cleanup of <board>_nand build rules.
- commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 2 08:33:56 2007 +0200
- ppc4xx: Code cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c92409812206ac67a7fa7aae298539a9c3804a46
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Jul 31 18:51:48 2007 +0200
- [ppc440SPe] Graceful recovery from machine check during PCIe configuration
- During config transactions on the PCIe bus an attempt to scan for a
- non-existent device can lead to a machine check exception with certain
- peripheral devices. In order to avoid crashing in such scenarios the
- instrumented versions of the config cycle read routines are introduced, so
- the exceptions fixups framework can gracefully recover.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Acked-by: Rafal Jaworowski <raj@semihalf.com>
- commit dec99558b9ea75a37940d07f41a3565a50b54ad1
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Tue Jul 31 18:19:54 2007 +0200
- [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
- This brings back separate settings for PCIe bus numbers depending on chip
- revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
- commit. 440SPe rev. A does NOT work properly with the same settings as for
- the rev. B (no devices are seen on the bus during enumeration).
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 2 00:48:45 2007 +0200
- Fix build errors and warnings / code cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
- Author: Eugene OBrien <eugene.obrien@advantechamt.com>
- Date: Tue Jul 31 10:24:56 2007 +0200
- ppc4xx: Update AMCC Bamboo 440EP support
- Changed storage type of cfg_simulate_spd_eeprom to const
- Changed storage type of gpio_tab to stack storage
- (Cannot access global data declarations in .bss until afer code relocation)
- Improved SDRAM tests to catch problems where data is not uniquely addressable
- (e.g. incorrectly programmed SDRAM row or columns)
- Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
- Fixed AM29LV320DT (OpCode Flash) sector map
- Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 31 08:37:01 2007 +0200
- ppc4xx: Update 440EPx lwmon5 board support
- - Clear ECC status regs after ECC POST test
- - Set dcbz for ECC generation with caches enabled as default
- - Code cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 30 11:04:57 2007 +0200
- ppc4xx: Only print ECC related info when the error bis are set
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e36220a4baf1f188ba60f17e9d0f043069b1362a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Jul 27 16:44:31 2007 +0200
- new FPGA image for PLU405 board
- new FPGA image for PLU405 board with improved CompactFlash timing
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Fri Jul 27 14:43:59 2007 +0200
- [ADS5121] Support for the ADS5121 board
- The following MPC5121e subsystems are supported:
- - low-level CPU init
- - NOR Boot Flash (common CFI driver)
- - DDR SDRAM
- - FEC
- - I2C
- - Watchdog
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- Signed-off-by: Jan Wrobel <wrr@semihalf.com>
- commit 1863cfb7b100ba0ee3401799457a01dc058745f8
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Fri Jul 27 14:22:04 2007 +0200
- [PPC] Remove unused MSR_USER definition
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit d4024bb72dd81695ec099b2199eda0d27c623e62
- Author: John Otken <john@softadvances.com>
- Date: Thu Jul 26 17:49:11 2007 +0200
- ppc4xx: Add support for AMCC 405EP Taihu board
- Signed-off-by: John Otken <john@softadvances.com>
- commit b66091de6c7390620312c2501db23d8391e7cabb
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Jul 26 15:08:01 2007 +0200
- ppc4xx: lwmon5: Update Lime initialization
- Change Lime SDRAM initialization to now support 100MHz and
- 133MHz (if enabled). Also the framebuffer is initialized to
- display a blue rectangle with a white border.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9f24a808f17fc0f37b7fb4805f734741335caecc
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 24 09:52:52 2007 +0200
- ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
- The used Intel NOR FLASH chips have internally two dies, and are now
- treated as two seperate chips.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit aedf5bde179ecfbd0a96130d18996a96518b785f
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 24 07:20:09 2007 +0200
- ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
- As suggested by Hakan Eryigit, here an updated setup for the lwmon5
- interrupt controller.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a71d96eac8130b53a91f93cd10c70fca0db18d52
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 20 15:03:44 2007 +0200
- ppc4xx: Fix bug with default GPIO output value
- As spotted by Matthias Fuchs, the default output values for all GPIO1
- outputs were not setup correctly. This patch fixes this issue.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 531e3e8b831f357056448fa573137d5fb37000fd
- Author: Pavel Kolesnikov <concord@emcraft.com>
- Date: Fri Jul 20 15:03:03 2007 +0200
- POST: Add ECC POST for the lwmon5 board
- This patch adds ECC Post test for the Lwmon5 board based
- on PPC440EPx to U-Boot.
- Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
- Acked-by: Yuri Tikhonov <yur@emcraft.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit cc3023b9f95d7ac959a764471a65001062aecf41
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Thu Jul 19 17:12:28 2007 +0200
- Fix breakage of 8xx boards from recent commit.
- This patch fixes the negative consequences for 8xx of the recent
- "ppc4xx: Clean up 440 exceptions handling" commit.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 13:11:12 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 10:02:12 2007 +0200
- ppc4xx: Code cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 10:01:38 2007 +0200
- ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 10:00:43 2007 +0200
- ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
- The new boardspecific DDR2 controller configuration is used for the Yucca
- board. Now the Yucca board with 440SPe Rev. A chips is also supported.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 09:57:00 2007 +0200
- ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
- The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
- support non default, boardspecific DDR(2) controller configuration.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5743a9207a370b90f09b20ebd61167c806b937f3
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 08:53:51 2007 +0200
- ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
- The new function remove_tlb() can be used to remove the TLB's used to
- map a specific memory region. This is especially useful for the DDR(2)
- setup routines which configure the SDRAM area temporarily as a cached
- area (for speedup on auto-calibration and ECC generation) and later
- need this area uncached for normal usage.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Jul 16 00:31:07 2007 +0200
- [PATCH] Support for Xilinx EmacLite controller
- commit 3a6cab844cf74f76639d795e0be8717e02c86af7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jul 14 22:51:02 2007 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Jul 14 13:11:28 2007 +0200
- [FIX] support for simply measuring time
- commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Jul 14 12:41:23 2007 +0200
- [FS] Added support for ROMFS
- commit 011595307731a7a67a7445d107c279d031e8ab97
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Sat Jul 14 01:06:58 2007 +0200
- [PCS440EP] - fix compile error, if BUILD_DIR is used
- commit 5a2f1098d81ad58b309e5e558d0492643166a799
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Jul 14 00:18:48 2007 +0200
- [PATCH] Support time without timer
- commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 13 21:43:55 2007 +0200
- [PATCH] Remove problem with disabled BARREL SHIFTER
- commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 13 21:41:44 2007 +0200
- [FIX] correct help for rspr
- commit fad63407154f46246ce80d53a9c669a44362ac67
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jul 13 09:54:17 2007 +0200
- make show_boot_progress () weak.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 907902472391b6ca1876ec300687562ecaf459b1
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jul 13 08:26:05 2007 +0200
- [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
- - fix compile error, if BUILD_DIR is used
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 12 16:32:08 2007 +0200
- ppc4xx: Change receive buffer handling in the 4xx emac driver
- This change fixes a bug in the receive buffer handling, that
- could lead to problems upon high network traffic (broadcasts...).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 12 01:45:34 2007 +0200
- Update CHANGELOG, minor coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Jun 8 16:41:18 2007 -0500
- Remove erroneous errata code from Marvel 88E1111S driver
- The Marvel 88E1111S driver for the TSEC was copied from the
- 88E1101 driver, and included a fix for an erratum which does not
- exist on that part. Now it is removed
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Jun 5 16:38:44 2007 -0500
- From: eran liberty <eran.liberty@gmail.com>
- adds the reset register to 85xx immap
- Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
- Author: Andy Fleming <afleming@freescale.com>
- Date: Thu May 10 17:50:01 2007 -0500
- Polished the 85xx ADS config files
- Made the boot commands use device trees by default.
- Also moved the ramdisk to 1000000 (I think the previous address
- was getting overridden during boot).
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed May 9 11:03:32 2007 -0500
- 8544ds: Fix Makefile after moving pixis to board/freescale.
- The OBJTREE != SRCTREE build scenario was broken.
- This fixes it.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed May 9 00:54:20 2007 -0500
- tsec: Fix PHY code to match first driver
- Jarrold Wen noticed that the generic PHY code always matches
- under the current implementation. Change it so the first match
- wins, and *only* unknown PHYs trigger the generic driver
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit ccc091aac61a38cd998d575d92f7232e256d6312
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue May 8 17:27:43 2007 -0500
- Add support for CPM device tree configuration to 8560 ADS
- * Adds code to modify CPM frequencies
- * Cleans up the config file to #define TSEC and (for now) #undef FCC
- * Adds the MII command for all 8560 ADS configurations
- * Updates config file to provide convenience commands for booting
- with a device tree
- Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue May 8 17:23:02 2007 -0500
- Fix Marvell 88e1145 PHY init code
- Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
- where the reset was being done after the errata code instead of
- before.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 5dc210dec5bace98a50b6ba905347890091a9bb0
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:52:16 2007 -0500
- Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:52:08 2007 -0500
- pciauto setup bridge
- The P2P bridge bus numbers programmed into the device are relative to
- hose->first_busno.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 571f49fa717004ca4268b4e24057efc7bf9f987b
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:52:01 2007 -0500
- Support PCIe extended config registers
- FSL PCIe block has extended cfg registers in the 100 and 400 range.
- For example, to read the LTSSM register: pci display <busn>.0 404 1
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit ba5feb12581bb2912ce301e4866b71f846e9fc07
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:51:48 2007 -0500
- Minor improvements to drivers/pci_auto.c
- - Make pciauto_{pre,post}scan_setup_bridge non-static
- - Added physical address display in debug messages.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 40e81addab7bb74d20ddf681ce9babc880a828ee
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:51:35 2007 -0500
- Start pci hose scan from hose->current_busno.
- Ensure hose->current_busno is not less than first_busno. This fixes
- broken board code which leaves current_busno=0 when first_busno is
- greater than 0 for the cases with multiple controllers.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 3865b1fb7843a08ad49a6319a36415752276ff48
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 11 12:13:53 2007 +0200
- Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fa1df308926a6f70e3504c57514ef27ac31fd13a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Jul 11 20:11:07 2007 +0200
- CM1.QP1: Support for the Schindler CM1.QP1 board.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Wed Jul 11 18:39:11 2007 +0200
- [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
- - now the Flash ST M29W040B is supported (not tested)
- - fix the "led" command
- - fix compile error, if BUILD_DIR is used
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Jul 8 13:44:27 2007 +0200
- Fix malloc problem introduced with the relocation fixup for the PPC platform
- The relocation fixup didn't handle the malloc pointer initialization
- correctly. This patch fixes this problem. Tested successfully on 4xx.
- The relocation fixup patches for 4xx will follow soon.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0dca874db62718e41253659e60f3a1de7eb418ce
- Author: TsiChung <tcliew@Goku.(none)>
- Date: Tue Jul 10 15:45:43 2007 -0500
- Cache update and added CFG_UNIFY_CACHE
- Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
- Signed-off-by: TsiChung <tcliew@Goku.(none)>
- commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:36:16 2007 -0500
- Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
- Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:31:25 2007 -0500
- Update header files
- Include immap.h and renamed mcfrtc.h to rtc.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2870e98ac8e5553e9187b12a47e5f46babb53990
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:29:21 2007 -0500
- Add mcffec_initialize()
- Added mcffec_initialize() in eth_initialize()
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:27:40 2007 -0500
- Update header file and clean up
- Include immap.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 0cee9c66318602c856a899ae5fa7579ccba6443a
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:23:15 2007 -0500
- New uart structure and defines
- Seperated from mcfuart.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit a90e79de8d99e9c9d69d60bfff9f24c337165900
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:22:31 2007 -0500
- New timer structure and defines
- Seperated from mcftimer.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit e04acb2eba4782489417240eff76e20e176aec10
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:21:09 2007 -0500
- Rename mcfrtc to rtc
- Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:17:36 2007 -0500
- Rename mcfserial.c. Update include header
- Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:13:58 2007 -0500
- Header file update, clean up and cache handling
- Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:10:40 2007 -0500
- Create interrupts.c and modify Makefile
- interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit ddd104f1ed655eda50c06ba636237a83ed943f34
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:06:55 2007 -0500
- Enable Icache
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit b9bf3de377b2bae70c983c9b97feae914999e735
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:05:31 2007 -0500
- Update header file and some clean up
- Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 84a015b52ec820a5ae173717d78516de731c89c2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:03:28 2007 -0500
- Update header file and enable icache
- Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:01:22 2007 -0500
- Update header file and removed interrupt_init()
- Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 3b635492c95bd0d6e08f93f699821cba1f602a64
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:57:46 2007 -0500
- Update for flash.o and mii.o
- Removed flash.o and added mii.o
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit c5ded275d839e4ff79f41718d50a835d989f57bc
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:56:19 2007 -0500
- MII functions calls.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 427c814104560e29bda14955c67703245aaaa5b4
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:54:42 2007 -0500
- Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
- The removed MII routines will be placed in mii.c.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:51:05 2007 -0500
- Duplicate code
- There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2744354a8437b8f78db178e30660215688bff570
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:46:38 2007 -0500
- Seperate old structure defines and new structure defines
- Removed new uart structure and defines to uart.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:45:01 2007 -0500
- Seperate old structure defines and new structure defines
- New timer structure and defines will move to new timer.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:42:23 2007 -0500
- Clean up
- Removed whitespace
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:41:24 2007 -0500
- Clean up
- Replaced whitespace with tabs
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:39:07 2007 -0500
- Create new header file and move peripherals base address from configs file to new header file.
- Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:24:58 2007 -0500
- Revert file mode
- Changed MAKEALL file mode to executable, removed executable file mode from Makefile
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:19:50 2007 -0500
- disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:13:21 2007 -0500
- drivers/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f40a7f3e3888b42a43674b099e5470022c8c544c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:07:56 2007 -0500
- fs/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:05:02 2007 -0500
- net/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 902531788376046da212afd1661cffb62f3daa1c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:02:44 2007 -0500
- common/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d39b57415838c73fb0a37eca84de3c68ba990586
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 10:48:22 2007 -0500
- board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 77a318545d57aefa844752465b94c7e09a3f26d0
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 10:39:10 2007 -0500
- board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 10:27:39 2007 -0500
- cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 079a136c3588814784561d6e4856970ee82d6e2a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 10:12:10 2007 -0500
- include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:38:02 2007 -0500
- include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:29:01 2007 -0500
- include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:22:23 2007 -0500
- include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:10:49 2007 -0500
- include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:02:57 2007 -0500
- include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 22:08:34 2007 -0500
- Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
- All of the choices for CONFIG_BOOTP_ are now documented in
- the README file. You must now individually select exactly
- the set that you want using a series of
- #define CONFIG_BOOTP_<x>
- statements in the board port config files now.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d3b8c1a743dcd31625c99e6a44590f207eb00028
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:57:31 2007 -0500
- include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2fd90ce575b02d189cbf443c85309bcd001aa393
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:48:26 2007 -0500
- include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 37d4bb70586659dedef1658ce1bed071be098aec
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:38:02 2007 -0500
- include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 18225e8dd1950bd6dbf35011e436db7f474c187d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:31:24 2007 -0500
- include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:24:19 2007 -0500
- include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:16:53 2007 -0500
- include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 19:12:30 2007 -0500
- Retire CONFIG_COMMANDS finally.
- Strip old CFG_CMD_* symbols out.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b5501f7d720fed99ab0b42c83f5dea52868ce007
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 19:10:03 2007 -0500
- Update README.* to reference new CONFIG_CMD_* names now.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 19:06:00 2007 -0500
- cpu/m*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:57:22 2007 -0500
- cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ab3abcbabd840928fb1eb5122118ca466b5e5013
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:45:16 2007 -0500
- board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:38:39 2007 -0500
- board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c508a4cefd8a953fc64957650506a035e6e3d9d1
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:31:28 2007 -0500
- board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:24:55 2007 -0500
- board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit fcec2eb93e126400009729328e797f12bc94f1fd
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:19:09 2007 -0500
- board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a593814f2be0c9cdc3133cd550b167b8a988328f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:10:50 2007 -0500
- rtc/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 67350568f9d46e66c21829f3513b3db0caeb948b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:05:38 2007 -0500
- lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7def6b34f910f08d7ef0a14646da067719237ca2
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:02:11 2007 -0500
- lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:56:50 2007 -0500
- fs/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c91898bbc505aff3e12a807af88e76da18efb7ee
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:46:09 2007 -0500
- tools/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:45:14 2007 -0500
- net/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:39:42 2007 -0500
- drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:30:01 2007 -0500
- drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:22:37 2007 -0500
- disk/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 639221c76c88215bd55af83ad174fc30d1940f8f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:15:49 2007 -0500
- include/: Remove obsolete references to CONFIG_COMMANDS
- Mostly removed from comments here.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jul 10 00:01:28 2007 +0200
- Coding style cleanup; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c8603cfbd4573379a6076c9c208545ba2bbf019a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 9 11:00:24 2007 +0200
- Small coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Jul 9 10:10:08 2007 +0200
- Migrate esd 405EP boards to new NAND subsystem
- Remove unused CFG_NAND_LEGACY define
- These boards to not have NAND.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Jul 9 10:10:06 2007 +0200
- Migrate esd 405EP boards to new NAND subsystem
- Migrate esd 405EP boards to new NAND subsystem
- -cleanup
- -use correct io accessors (in/out_be32())
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit e09f7ab5749c345f924da272bea0521a73af5b11
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Jul 9 10:10:04 2007 +0200
- Migrate esd 405EP boards to new NAND subsystem
- This patch prepares the migration from the legacy NAND driver
- to U-Boot's new NAND subsystem for esd boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c3517f919d0f61650cf3027fd4faf0f631142f6c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 18:10:08 2007 -0500
- common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 18:05:39 2007 -0500
- common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c76fe47425afc7d5d670ff0539823c85d65d9c42
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 18:02:23 2007 -0500
- common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit baa26db4113679b80970ff447d91cc10217742a6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 17:51:39 2007 -0500
- common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 17:02:01 2007 -0500
- Clear up confusion over the CMD_POST and POST_DIAG mess.
- For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
- when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
- Clear this mess up some.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b3631487105a57ab7cbadfc26efbaf9676275018
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:45:08 2007 -0500
- Remove references to the old cmd_confdefs.h include file.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:42:59 2007 -0500
- include/configs: Catch some CONFIG_CMD_* conversion stragglers.
- Use new CONFIG_CMD_* in lwmon5.h board config file.
- Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a5562901661bd428f7e5feb333f796372cb81019
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:31:57 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:02:44 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various S* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:12:40 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various R* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 14:55:07 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 14:49:44 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various P* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 14:21:43 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 14:14:17 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various M* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 348f258f24253433e4a2302a0bbceb6740a67246
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 13:46:18 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 10:09:35 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various H* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 60a0876b5106b34220e459c208bbf648073306c0
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sat Jul 7 21:04:26 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit dcaa71562826a2466e894c868d132509dcda8444
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sat Jul 7 20:56:05 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various E* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3c3227f3c737502311b25b72084573901cbbf17d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sat Jul 7 20:40:43 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various D* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jul 5 19:52:35 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various C* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jul 5 19:32:07 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various B* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 498ff9a228485bd4b9f23d066bada268f9add1dd
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jul 5 19:13:52 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various A* named board config files.
- Since ADS860.h includes "board/fads/fads.h" with ramifications
- on the CONFIG_COMMAND treatment, it too has to be adjusted to
- exclude already configured commands in this same commit.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 10e038932f22ee80ebd53de312531e70e6590a2f
- Author: Thomas Knobloch <knobloch@siemens.com>
- Date: Fri Jul 6 14:58:39 2007 +0200
- [NAND] Bad block skipping for command nboot
- The old implementation of command nboot does not support reading the image from
- NAND flash with skipping of bad blocks. The patch implements a new version of
- the nboot command: by calling nboot.jffs2 from the u-boot command line the
- command will load the image from NAND flash with respect to bad blocks (by using
- nand_read_opts()). This is similar to e.g. the NAND read command: "nand
- read.jffs2 ...".
- Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 6 12:26:51 2007 +0200
- ppc4xx: Update lwmon5 default environment
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5d187430a055d62f17ca84d75e7245439d1f7e75
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 6 11:48:24 2007 +0200
- ppc4xx: Update lwmon5 board
- Add unlock=yes environment variable to default variables to unlock
- the CFI flash by default.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 6 09:45:47 2007 +0200
- Fix problem with get/setdcr commands introduced by cfg patches
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 6 02:50:19 2007 +0200
- Code cleanup and default config update for STC GP3 SSA board.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e4dbe1b215f5c6c462e76909d240bd96472b84de
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 5 17:56:27 2007 +0200
- Fixing some typos etc. introduced mainly by cfg patches.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 5 11:12:16 2007 +0200
- Minor coding style cleanup. Update CHANGELOG.
- commit dca3b3d6d6396b67e5e84af53452164923c73443
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:46 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:38 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:30 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various s* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:23 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 26a34560d56a9df5bc2ae23525d9229736134757
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:17 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various p* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a5cb23092a7d31490a33d4ec871468b63babfa3c
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:13 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various o* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:07 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various n* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:01 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various m* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:57 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various l* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:51 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:32 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various i* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:25 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various h* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:19 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various g* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:10 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various e* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:03 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various d* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:56 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various c* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:49 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various b* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0b361c916617aff79e647b40f0e43361e0bbaccf
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:42 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various a* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b730cda82e362df6a22f4c59c0a9b97e885b1014
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:35 2007 -0500
- include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d794cfefead5fc177cf4f41164e80382e9c9484a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:15 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:07 2007 -0500
- include/configs: Use new CONFIG_CMD_* in STx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:30:58 2007 -0500
- include/configs: Use new CONFIG_CMD_* in sbc* board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2694690e285acaa34922f55f4b5ae030da60c55a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:30:50 2007 -0500
- include/configs: Use new CONFIG_CMD_* in TQM board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1cc4c458329765b58e584a19821e796b3c10e976
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:30:28 2007 -0500
- include/configs: Use new CONFIG_CMD_* in 82xx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:30:06 2007 -0500
- include/configs: Use new CONFIG_CMD_* in 83xx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b44896215a09c60fa40cae906f7ed207bbc2c492
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu Jul 5 08:17:37 2007 +0200
- Merged POST framework with the current TOT.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit b24629fa377214d63bb40d1360e354b6d3e4af56
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 13 13:23:15 2007 -0500
- mpc86xx: Remove old CFG_CMD_* references.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 13 13:22:54 2007 -0500
- Add MPC8568MDS to MAKEALL 85xx target.
- It was missing from the original port submission.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 13 13:22:08 2007 -0500
- include/configs: Use new CONFIG_CMD_* in 85xx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 56b304ac2091689506088a9ae67f63fd6300cf16
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 13 13:21:37 2007 -0500
- Fix #if typo in CONFIG_CMD_* changes.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f780b83316d9af1f61d71cc88b1917b387b9b995
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Wed Jun 27 18:11:38 2007 +0200
- resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
- Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
- commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 4 10:06:30 2007 +0200
- ppc4xx: Update lwmon5 board
- - Add optional ECC generation routine to preserve existing
- RAM values. This is needed for the Linux log-buffer support
- - Add optional DDR2 setup with CL=4
- - GPIO50 not used anymore
- - Lime register setup added
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6810a34677dbc446334f5e451f1682426dd33b49
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:17:28 2007 -0600
- Fix Makefile to use $(MKCONFIG) macro for all board ports
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:17:28 2007 -0600
- Fix Makefile to use $(MKCONFIG) macro for all board ports
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 057004f4a4863554d56cc56268bfa7c7d9738e27
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:49 2007 -0600
- Correct fixup relocation for mpc83xx
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:44 2007 -0600
- Correct fixup relocation for mpc8260
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f3a52fe05923935db86985daf9438e2f70ac39aa
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:39 2007 -0600
- Correct fixup relocation for mpc824x
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:34 2007 -0600
- Correct fixup relocation for mpc8220
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:29 2007 -0600
- Correct fixup relocation for MPC5xxx
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 3649cd99ba815b6601868735765602f00ef3692b
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:24 2007 -0600
- Correct relocation fixup for mpc5xx
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:19 2007 -0600
- Don't set gd->reloc_off if relocation of .fixup works correctly
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:14 2007 -0600
- Remove obsolete mpc83xx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:09 2007 -0600
- Consolidate mpc8260 linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:04 2007 -0600
- Remove obsolete mpc824x linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:59 2007 -0600
- Remove obsolete mpc824x linker scripts (3 of 4)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit a71c084f3ac7fedf144537db2b2da47323068833
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:53 2007 -0600
- Remove obsolete mpc824x linker scripts (2 of 4)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f670a15468d1365241d40022b9408e1004181f5e
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:48 2007 -0600
- Remove obsolete mpc824x linker scripts (1 of 4)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 09555bd45a04c0e54f172528d21bc18896550d28
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:43 2007 -0600
- Remove obsolete mpc8220 linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5efb992f046e51225c93d52f80fecbe433abd789
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:38 2007 -0600
- Remove obsolete mpc5xxx linker scripts (3 of 3)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 07c13dfef65b31647e69d8b61daa1eec598add1a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:33 2007 -0600
- Remove obsolete mpc5xxx linker scripts (2 of 3)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:28 2007 -0600
- Remove obsolete mpc5xxx linker scripts (1 of 3)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit b7d8e05f8675249b5f208aa73babeed384a4519d
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:23 2007 -0600
- Remove obsolete mpc5xx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:18 2007 -0600
- Consolidate mpc83xx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:13 2007 -0600
- Consolidate mpc8260 linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:08 2007 -0600
- Consolidate mpc824x linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 9c757b789a59a855db57b448dd825329c4e9c4a0
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:03 2007 -0600
- Consolidate mpc8220 linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit d181c9a15cd41863fe24840d17848429f27d3c8c
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:32:58 2007 -0600
- Consolidate mpc5xxx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 287ac924adb7291bebe5086652a362a30ab28b13
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:32:53 2007 -0600
- Consolidate mpc5xx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 4 00:43:53 2007 +0200
- Fix a few file permission problems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 4 00:38:38 2007 +0200
- Minor coding style cleanup. Rebuild CHANGELOG file.
- commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:44 2007 -0500
- configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 602ad3b33d9ceef83dbab46be68646d645d637ee
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:39 2007 -0500
- README: Rewrite command line config to use CONFIG_CMD_* names.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 72a074cec68e5bad60d63206c050974e08afd804
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:34 2007 -0500
- include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:28 2007 -0500
- tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9107ebe0d352420895ab69b715697bdebc8caf50
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:23 2007 -0500
- board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5e378003d592ea828ec69d6defcd4de79096dd5c
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:19 2007 -0500
- board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 737184114ec9c9e0ab94d6713536126073bd2472
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:15 2007 -0500
- cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f48070fe5fe440dfb5ee5268c920de70e48ea327
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:08 2007 -0500
- cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:03 2007 -0500
- lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:58 2007 -0500
- lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 98b79003c21c2578206003256de4e781d6b36ca8
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:53 2007 -0500
- rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6e2115acb6a892d53a6881bf253ae41d3df39156
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:49 2007 -0500
- net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 45cdb9b72c94655c7308b464a2666057c0b286e0
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:34 2007 -0500
- disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:20 2007 -0500
- fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d5be43de93ff905c465e509d45a3164ef48d26e7
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:10 2007 -0500
- drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b453960d4fdb87b3970d96119b90df2ed024fc4a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:05 2007 -0500
- common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:01:54 2007 -0500
- common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a76adc8142c1d956385a109e0b70f9319ede4d66
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:01:43 2007 -0500
- common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:01:34 2007 -0500
- Introduce initial versions of new Command Config files.
- Derive three new files from cmd_confdefs.h:
- config_bootp.h - Has BOOTP related config options, not commands
- config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
- config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
- For now, include "config_bootp.h" for compatability until all
- users of it directly include it properly.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1f2a05898658900dc5717761e27abf2052e67e13
- Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
- Date: Sat Jun 30 18:50:48 2007 +0200
- Fix S-ATA support.
- Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
- commit a5d71e290f3673269be8eefb4ec44f53412f9461
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Mon Jun 25 19:11:37 2007 +0200
- [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
- Author: Niklaus Giger <niklaus.giger@nestal.com>
- Date: Mon Jun 25 17:03:13 2007 +0200
- ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
- This patch prints the DDR status registers upon machine check
- interrupt on the 440EPx/GRx. This can be useful especially when
- ECC support is enabled.
- I added some small changes to the original patch from Niklaus to
- make it compile clean.
- Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 807018fb7faceb429ce0cb47baa2073746b33a4e
- Author: Niklaus Giger <niklaus.giger@nestal.com>
- Date: Mon Jun 25 16:50:55 2007 +0200
- ppc4xx: Fix O=buildir builds
- This patch fixes the problem to assemble cpu/ppc4xx/start.S
- experienced last week where building failed having specified
- O=../build.sequoia.
- Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
- commit 466fff1a7bb5fe764a06450626f6098219f446b8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 25 15:57:39 2007 +0200
- ppc4xx: Add pci_pre_init() for 405 boards
- This patch removes the CFG_PCI_PRE_INIT option completely, since
- it's not needed anymore with the patch from Matthias Fuchs with
- the "weak" pci_pre_init() implementation.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6f35c53166213c24a5a0e2390ed861136ff73870
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Jun 24 17:41:21 2007 +0200
- ppc4xx: Maintenance patch for esd's CPCI405 derivats
- -add pci_pre_init() for pci interrupt fixup code
- -disable phy sleep mode via reset_phy() function
- -use correct io accessors
- -cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Jun 24 17:23:41 2007 +0200
- ppc4xx: Add pci_pre_init() for 405 boards
- This patch adds support for calling a plattform dependant
- pci_pre_init() function for 405 boards. This can be used to
- move the current pci_405gp_fixup_irq() function into the
- board code.
- This patch also makes the CFG_PCI_PRE_INIT define obsolete.
- A default function with 'weak' attribute is used when
- a board specific pci_pre_init() is not implemented.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jun 22 23:59:00 2007 +0200
- Coding stylke cleanup; rebuild CHANGELOG
- commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
- Author: Igor Lisitsin <igor@emcraft.com>
- Date: Wed Apr 18 14:55:19 2007 +0400
- Adapt log buffer code to support Linux 2.6
- A new environment variable, "logversion", selects the log buffer
- behaviour. If it is not set or set to a value other than 2, then the
- old, Linux 2.4.4, behaviour is selected.
- Signed-off-by: Igor Lisitsin <igor@emcraft.com>
- --
- commit a11e06965ec91270c51853407ff1261d3c740386
- Author: Igor Lisitsin <igor@emcraft.com>
- Date: Wed Mar 28 19:06:19 2007 +0400
- Extend POST support for PPC440
- Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
- Signed-off-by: Igor Lisitsin <igor@emcraft.com>
- --
- commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jun 22 19:11:54 2007 +0200
- [PCS440EP] upgrade the PCS440EP board:
- - Show on the Status LEDs, some States of the board.
- - Get the MAC addresses from the EEProm
- - use PREBOOT
- - use the CF on the board.
- - check the U-Boot image in the Flash with a SHA1
- checksum.
- - use dynamic TLB entries generation for the SDRAM
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 3a1f5c81b0b9557817a789bece839905581c2205
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 22 16:58:40 2007 +0200
- ppc4xx: Fix problem with extended program_tlb() funtion
- The recently extended program_tlb() function had a problem when
- multiple TLB's had to be setup (for example with 512MB of SDRAM). The
- virtual address was not incremented. This patch fixes this issue
- and is tested on Katmai with 512MB SDRAM.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Fri Jun 22 14:58:04 2007 +0200
- [ppc] Fix build breakage for all non-4xx PowerPC variants.
- - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
- - minor 4xx cleanup
- commit d677b32855f577ae2690dcd64a172cdd706e0ffc
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Fri Jun 22 10:34:12 2007 +0200
- [patch] add nand_init() prototype to nand.h
- since nand_init() is expected to be called by other parts of u-boot, there
- should be a prototype for it in nand.h
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jun 20 18:14:24 2007 +0200
- Coding style cleanup. Refresh CHANGELOG.
- commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 19 17:22:44 2007 +0200
- ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
- This patch adds a board command to configure the I2C bootstrap EEPROM
- values. Right now 533 and 667MHz are supported for booting either via NOR
- or NAND FLASH. Here the usage:
- => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
- => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 19 16:42:31 2007 +0200
- [ppc4xx] Fix problem with NAND booting on AMCC Acadia
- The latest changes showed a problem with the location of the NAND-SPL
- image in the OCM and the init-data area (incl. cache). This patch
- fixes this problem.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 86ba99e34194394052d24c04dc40d1263d29a26f
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 19 16:40:58 2007 +0200
- [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jun 18 13:50:13 2007 -0500
- Added M5329AFEE and M5329BFEE Platforms
- Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
- drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
- include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
- rtc/mcfrtc.c
- Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
- common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
- include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
- include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
- include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
- lib_m68k/time.c, net/eth.c and rtc/Makefile
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Jun 17 19:04:11 2007 +0200
- [fix] email reparation
- commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Jun 17 19:03:21 2007 +0200
- [FIX] fix microblaze file permitission
- commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 15 11:33:41 2007 +0200
- [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
- Now CONFIG_440 has to be defined in all PPC440 board config files.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit efa35cf12d914d4caba942acd5a6c45f217de302
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Jun 15 11:19:28 2007 +0200
- ppc4xx: Clean up 440 exceptions handling
- - Introduced dedicated switches for building 440 and 405 images required
- for 440-specific machine instructions like 'rfmci' etc.
- - Exception vectors moved to the proper location (_start moved away from
- the critical exception handler space, which it occupied)
- - CriticalInput now serviced (with default handler)
- - MachineCheck properly serviced (added a dedicated handler and return
- subroutine)
- - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
- unhandled and those not relevant for 4xx were eliminated)
- - Eliminated Linux leftovers, removed dead code
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 15 08:18:01 2007 +0200
- [ppc4xx] Add initial lwmon5 board support
- This patch adds initial support for the Liebherr lwmon5 board euqipped
- with an AMCC 440EPx PowerPC.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 85f737376d5ff3d5f0d45a8b657686326d175307
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 15 07:39:43 2007 +0200
- [ppc4xx] Extend 44x GPIO setup with default output state
- The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
- is extended with the default GPIO output state (level).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jun 14 11:14:32 2007 +0200
- [ppc4xx] Extend program_tlb() with virtual & physical addresses
- Now program_tlb() allows to program a TLB (or multiple) with
- different virtual and physical addresses. With this change, now one
- physical region (e.g. SDRAM) can be mapped 2 times, once with caches
- diabled and once with caches enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
- Author: Detlev Zundel <dzu@denx.de>
- Date: Wed May 23 19:02:41 2007 +0200
- Change 'repeatable' attribute of some commands to sensible values.
- Most prominently this changes 'erase' to be non-repeatable.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 5afb202093f6a001797db92cf695b93a70ea9ab4
- Author: Detlev Zundel <dzu@denx.de>
- Date: Wed May 23 18:47:48 2007 +0200
- Fix 'run' not to continue after interrupted command
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 9b7464a2c88614e1061f509c48930a3d240d1a35
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Mon Jun 11 15:14:24 2007 +0200
- USB: This patch fix readl in ohci swap reg access.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Jun 8 14:52:22 2007 +0200
- TQM5200: Add Flat Device Tree support, update default env. accordingly.
- Signed-off-by: Jan Wrobel <wrr@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 9045f33c023f698660a2e45d1b2194c0711abebc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jun 8 10:24:58 2007 +0200
- Fix config problems on SC3 board; make ide_reset_timeout work.
- commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
- Author: Benoît Monin <bmonin@adeneo.eu>
- Date: Fri Jun 8 09:55:24 2007 +0200
- [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
- Set the correct value in GPIOx_TCR when configuring the gpio
- with CFG_440_GPIO_TABLE.
- Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f539edc076cfe52bff919dd512ba8d7af0e22092
- Author: Vadim Bendebury <vbendeb@google.com>
- Date: Thu May 24 15:52:25 2007 -0700
- cosmetic changes to bcm570x driver
- This is a cosmetic only changes submission.
- It affects files relevant to bcm570x driver.
- the commands used to generate this change was
- cd drivers
- Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
- The BMW target (the only one using this chip so far) builds cleanly, the
- `before and after' generated object files for drivers/bcm570x.c and
- drivers/tigon3.o are identical as reported by objdump -d
- Signed-off-by: Vadim Bendebury <vbendeb@google.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jun 6 16:26:56 2007 +0200
- Coding Style cleanup; generate new CHANGELOG file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 11:49:44 2007 +0200
- TRAB, USB: update trab board configuration for use of generic ohci driver
- commit dace45acd1c1357daa9322099d07c9a9e08b0024
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 11:49:43 2007 +0200
- USB: ohci fixes and cleanup for ppc4xx and yosemite board.
- commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 11:49:43 2007 +0200
- USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
- commit fc43be478f2aa37ce38acd85355038866e4162af
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 11:49:35 2007 +0200
- USB/OHCI: endianness cleanup in the generic ohci driver
- commit c440bfe6d6d92d66478a7e84402b31f48413617b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jun 6 11:42:13 2007 +0200
- ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
- This patch adds NAND booting support for the AMCC Acadia eval board.
- Please make sure to configure jumper J7 to position 2-3 when booting
- from NOR, and to position 1-2 when booting for NAND.
- I also added a board command to configure the I2C bootstrap EEPROM
- values. Right now only 267MHz is support for booting either via NOR
- or NAND FLASH. Here the usage:
- => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
- => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
- Author: Rodolfo Giometti <giometti@linux.it>
- Date: Wed Jun 6 10:08:14 2007 +0200
- Files include/linux/byteorder/{big,little}_endian.h define
- __BIG_ENDIAN and __LITTLE_ENDIAN.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Wed Jun 6 10:08:14 2007 +0200
- Add USB PCI-OHCI, USB keyboard and event poll support to the
- MPC8641HPCN board config file.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Wed Jun 6 10:08:14 2007 +0200
- USB PCI-OHCI, interrupt pipe and usb event poll support
- This patch added USB PCI-OHCI chips support, interrupt pipe support
- and usb event poll support. For supporting the USB interrupt pipe, the
- globe urb_priv is moved to purb in ed struct. Now, we can process
- several urbs at one time. The interrupt pipe support codes are ported
- from Linux kernel 2.4.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit fdcfaa1b02268b2899e374b35adf936c911a47eb
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Wed Jun 6 10:08:13 2007 +0200
- USB event poll support
- This patch adds USB event poll support, which could be used in usbkbd
- and other usb devices driver when the asynchronous interrupt
- processing is supported.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com
- commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
- Author: Rodolfo Giometti <giometti@linux.it>
- Date: Wed Jun 6 10:08:12 2007 +0200
- ISP116x: delay for crappy USB keys
- Using some (very) slow USB keys cause the USB host controller buffers
- are not ready to be read by the CPU so we need an extra delay before
- reading the USB storage data.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit 09444143670c9c2243cb7aba9f70b3713d33bed1
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 10:08:12 2007 +0200
- Change duplicate usb_cpu_init_fail to usb_board_init_fail
- Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
- this out.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Tue Jun 5 12:30:52 2007 -0500
- mpc8641 image size cleanup
- e600 does not have a bootpg restriction.
- Move the version string to beginning of image at fff00000.
- Resetvec.S is not needed.
- Update flash copy instructions.
- Add tftpflash env variable
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
- Author: Benoît Monin <bmonin@adeneo.eu>
- Date: Mon Jun 4 08:36:05 2007 +0200
- [PATCH] Fix ppc4xx bootstrap letter displayed on startup
- The attached patch is mainly cosmetic, allowing u-boot to
- display the correct bootstrap option letter according to the
- datasheets.
- The original patch was extended with 405EZ support by Stefan
- Roese.
- Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5b1313fb2758ffce8b624457f777d8cc6709608d
- Author: Nikita V. Youshchenko <yoush@debian.org>
- Date: Wed May 23 12:45:19 2007 +0400
- fix compilation problem for mpc8349itx CFG_RAMBOOT
- Current include/configs/MPC8349ITX.h does contain some support for building
- image that will be started from memory (without putting in into flash).
- It could be triggered by building with TEXT_BASE set to a low value.
- However, this support is incomplete: using of low TEXT_BASE causes
- defining configuration macros in inconsistent way, which later leads
- to compilation errors. In particular. flash support is being disabled,
- but then flash structures get referenced.
- This patch fixes this, making it possible to build with low TEXT_BASE.
- Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8a364f0970de49949d635e60accf463c6443ef8c
- Author: Nikita V. Youshchenko <yoush@debian.org>
- Date: Wed May 23 12:45:25 2007 +0400
- add missing 'console' var to default mpc8349itx config
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 16:18:17 2007 +0200
- ppc4xx: Add missing file for Bamboo NAND booting support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:58:19 2007 +0200
- ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
- This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
- suggested by AMCC it is not recommended to dynamically change the EBC
- speed after bootup. So we undo this change to be on the safe side.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:29:04 2007 +0200
- ppc4xx: Update Sequoia NAND booting support with ECC
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:27:11 2007 +0200
- ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
- This patch adds NAND booting support for the AMCC Bamboo eval board.
- Since the NAND-SPL boot image is limited to 4kbytes, this version
- only supports the onboard 64MBytes of DDR. The DIMM modules can't be
- supported, since the setup code for I2C DIMM autodetection and
- configuration is too big for this NAND bootloader.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 42be56f53c8b107868e6125c8524ae84293e95a7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:23:04 2007 +0200
- NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
- The U-Boot NAND booting support is now extended to support ECC
- upon loading of the NAND U-Boot image.
- Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a471db07fbb65a841ffc9f4f112562b945230f98
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:19:29 2007 +0200
- ppc4xx: Prepare Bamboo port for NAND booting support
- This patch updates the "normal" Bamboo NOR booting port, so
- that it is compatible with the coming soon NAND booting
- Bamboo port.
- It also enables the 2nd NAND flash on the Bamboo.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:16:58 2007 +0200
- ppc4xx: Update in_be32() functions and friends to latest Linux version
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:15:12 2007 +0200
- NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
- This patch adds hardware ECC support to the NDFC driver. It also
- changes the register access from using the "simple" in32/out32
- functions to the in_be32/out_be32 functions, which make sure
- that the access is correctly synced. This is the only recommended
- access to SoC registers in the current Linux kernel.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:12:15 2007 +0200
- NAND: Update nand_ecc.c to latest Linux version
- This patch updates the nand_ecc code to the latest Linux version.
- The main reason for this is the more compact code. This makes
- it possible to include the ECC code into the NAND bootloader
- image (NAND_SPL) for PPC4xx.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:09:50 2007 +0200
- ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 13:45:24 2007 +0200
- ppc4xx: Change Luan config file to support ECC
- With the updated 44x DDR2 driver the Luan board now supports
- ECC generation and checking.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7187db73491c8de0fb56efb5e5134ba5ec443089
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 13:45:00 2007 +0200
- ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
- Add config option for 180 degree advance clock control as needed
- for the AMCC Luan eval board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ee1529838abbfaa35f14e3ffbeaaba693159475f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu May 31 17:20:09 2007 +0200
- Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7049288fb1f16f1b317140226cdebd07bd416395
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:26:46 2007 +0200
- Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 4520fd4d2c450da49637216aa0e53739b61c60ac
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:06:36 2007 +0200
- Motion-PRO: Add support for redundant environment.
- Enable redundant environment, add a MTD partition for it; also add env.
- variable command for passing MTD partitions to the kernel command line.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit a26eabeec31746f06d309103690892805696e344
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:05:11 2007 +0200
- Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
- Allow passing longer command line to the kernel - useful especially
- for passing MTD partition layout.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 9160b96f71483a116de81c68985e8ee306d36764
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:04:18 2007 +0200
- Fix: Add missing NULL termination in strings expanded by macros parser.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 630ec84aef7228fc1dbfb38dec78541403a786cd
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:03:37 2007 +0200
- Motion-PRO: Update EEPROM's page write bits and write delay.
- Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
- have a page write capability of two bytes", and "This device offers fast (1ms)
- byte write". Add 3ms of extra delay.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c00125e07c1ebc125bab40e1e18bceed8be0c162
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:58:45 2007 +0200
- MPC5XXX, Motion-PRO: Fix PHY initialization problem.
- After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
- networking does not function. This commit switches PHY to TX mode by clearing
- the FX_SEL bit of Mode Control Register. It also reverses commit
- 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:57:15 2007 +0200
- Motion-PRO: Add support for the temperature sensor.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:55:23 2007 +0200
- Motion-PRO: Add displaying of CPLD revision information during boot.
- Signed-off-by: Jan Wrobel <wrr@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c99512d6bd3973f01ca2fc4896d829b46e68f150
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:53:43 2007 +0200
- MPC5xxx: Change names of defines related to IPB and PCI clocks.
- Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
- them does not cause PCI or IPB clocks to run at the specified speed.
- Instead, they configure divisors used to calculate said clocks. This
- patch renames the defines according to their real function.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit a11c0b85dc3664bb3c1e781137118730c8f619ab
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:51:48 2007 +0200
- Motion-PRO: Add LED support.
- Signed-off-by: Jan Wrobel <wrr@semihalf.com>
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
- Author: Ulf Samuelsson <ulf@atmel.com>
- Date: Thu May 24 12:12:47 2007 +0200
- [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
- Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d756894722c888d09a9fa1df8323753772d3dcce
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 24 09:49:00 2007 +0200
- ppc4xx: Fix small 405EZ OCM initilization bug in start.S
- As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
- fixes a small bug in the 405EZ OCM initialization. Thanks for
- spotting.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5d4a179013d59a76446462e1eb0a969fba63eb81
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 24 08:22:09 2007 +0200
- ppc4xx: Update AMCC Acadia support for board revision 1.1
- This patch updates the Acadia (405EZ) support for the new 1.1 board
- revision. It also adds support for NAND FLASH via the 4xx NDFC.
- Please note that the jumper J7 must be in position 2-3 for this
- NAND support. Position 1-2 is for NAND booting only. NAND booting
- support will follow later.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 822d55365bb557e084d0e33625a6dedcc866110b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed May 23 14:09:46 2007 -0500
- Add LIST_86xx MAKEALL target for PowerPC builds.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9f0077abd69f7a7c756a915b961037302be3e6f2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue May 22 12:48:09 2007 +0200
- ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6f3dfc139a838b0841c151efe00ad47db2366e79
- Author: Stefan Roese <sr@denx.de>
- Date: Tue May 22 12:46:10 2007 +0200
- ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
- This patch adds support for 405 PPC's to the 4xx NAND driver
- ndfc.c. This is in preparation for the new AMCC 405EZ.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 10603d76767426be803dadd4fb688b97eb69481c
- Author: Stefan Roese <sr@denx.de>
- Date: Mon May 21 07:41:22 2007 +0200
- ppc4xx: Fix problem in 405EZ OCM initialization
- As spotted by Bruce Adler this patch fixes an initialization problem
- for the 405EZ OCM.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri May 18 16:47:03 2007 +0100
- Reduce line lengths to 80 characters max.
- commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri May 18 14:34:07 2007 +0100
- Makefile permissions
- commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri May 18 14:33:11 2007 +0100
- Makefile permissions
- commit 255a3577c848706441daee0174543efe205a77f8
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed May 16 16:52:19 2007 -0500
- Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
- For all practical u-boot purposes, TSECs don't differ throughout the
- mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 70124c2602ae2d4c5d3dba05b482d91548242de8
- Author: Stefano Babic <sbabic@denx.de>
- Date: Wed May 16 14:49:12 2007 +0200
- Fix compile problem cause my Microblaze merge
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit ada4697d0230d6da552867777f98a67ec3ba2579
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Wed May 16 13:23:10 2007 +0200
- [PATCH] Run new sequoia boards with an EBC speed of 83MHz
- Because the Sequoia board does not boot with an EBC faster than 66MHz,
- the clock divider are changed after the initial boot process.
- This allows for maximum clocking speeds to be achieved on newer boards.
- Sequoia boards with 666.66 MHz processors require that the EBC divider
- be set to 3 in order to start the initial boot process at a slower EBC
- speed. After the initial boot process, the divider can be set back to 2,
- which will cause the boards to run at 83.333MHz. This is backward
- compatible with boards with 533.33 MHz processors, as these boards will
- already be set with an EBC divider of 2.
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- commit a7676ea7732f3c596805079fed7e5c9fac652cfc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 16 01:16:53 2007 +0200
- Minor Coding Style cleanup, update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d62f64cc23a940eafe712c776b3249e4160753d1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 16 00:13:33 2007 +0200
- Coding Style Cleanup, new CHANGELOG
- commit 3162eb836903c8b247fdc7470dd39bfa6996f495
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue May 15 23:38:05 2007 +0200
- Minor coding style cleanup.
- commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
- Author: mushtaq khan <mushtaq_k@procsys.com>
- Date: Fri Apr 20 14:23:02 2007 +0530
- Add driver for S-ATA-controller on Intel processors with South
- Bridge, ICH-5, ICH-6 and ICH-7.
- Implementation:
- 1. Code is divided in to two files. All functions, which are
- controller specific are kept in "drivers/ata_piix.c" file and
- functions, which are not controller specific, are kept in
- "common/cmd_sata.c" file.
- 2. Reading and Writing from the S-ATA drive is done using PIO method.
- 3. Driver can be configured for 48-bit addressing by defining macro
- CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
- addressing.
- 4. S-ATA read function is hooked to the File system, commands like
- ext2ls and ext2load file can be used. This has been tested.
- 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
- controller and identifies the S-ATA drives connected to it.
- 6. U-Boot command "sata" is added, which is used to read/write, print
- partition table and get info about the drives present. This I have
- implemented in same way as "ide" command is implemented in U-Boot.
- 7. This driver is for S-ATA in native mode.
- 8. This driver does not support the Native command queuing and
- Hot-plugging.
- Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
- commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
- Author: mushtaq khan <mushtaq_k@procsys.com>
- Date: Mon Apr 30 15:57:22 2007 +0530
- Fixes bug clearing the bss section for i386
- Hi,
- There is a bug in the code of clearing the bss section for processor
- i386.(File: cpu/i386/start.S)
- In the code, bss_start addr (starting addr of bss section) is put into
- the register %eax, but the code which clears the bss section refers to
- the addr pointed by %edi.
- This patch fixes this bug by putting bss_start into %edi register.
- Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
- commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Mon Apr 30 16:47:28 2007 -0500
- Add support for BCM5464 Quad Phy
- Added support for Broadcom's BCM5464 Quad Phy
- Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Wed May 9 08:10:57 2007 +0800
- Search the exception table with linear algorithm
- Search the exception table with linear algorithm instead of
- bisecting algorithm.
- Because the exception table might be unsorted.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
- Author: Aubrey.Li <aubrey.adi@gmail.com>
- Date: Mon May 14 11:47:35 2007 +0800
- Fix compilation issues on MACOSX
- Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
- Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
- commit 56fd7162985c412317bbf763a225fba23c64fd31
- Author: Stephen Williams <steve@icarus.com>
- Date: Tue May 15 07:55:42 2007 -0700
- Fix for compile of JSE target
- The attached patch fixes the compile of the JSE board in the
- denx git as of 14 may 2007. It is an extremely simple patch,
- it just adds the missing define of CFG_SYSTEMACE_WIDTH.
- Fix to compile JSE against 20070514 git of u-boot
- commit 69df3c4da0c93017cceb25a366e794570bd0ed98
- Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
- Date: Sun May 13 21:01:03 2007 +0900
- sh: MS7750SE support.
- This adds support for the Hitachi MS7750SE.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
- Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
- Date: Sun May 13 20:58:00 2007 +0900
- sh: First support code of SuperH.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri May 11 12:01:49 2007 +0200
- ppc4xx: Add mtcpr/mfcpr access macros
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 343c48bd84606c4025c8a7c7263fda465d6e284c
- Author: Stefan Roese <sr@denx.de>
- Date: Fri May 11 12:01:06 2007 +0200
- ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
- Author: Piotr Kruszynski <ppk@semihalf.com>
- Date: Thu May 10 16:55:52 2007 +0200
- [Motion-PRO] Add MTD and JFFS2 support, also add default partition
- definition.
- commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 11:42:44 2007 +0100
- Add the board directory for SMN42
- commit 160131bf965785419626df6c388729fe0b597992
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 11:41:58 2007 +0100
- Add the files for the SMN42 board
- commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 11:40:34 2007 +0100
- Remove the deleted files for the SMN42 patch
- commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 11:37:56 2007 +0100
- New board SMN42 branch
- commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 10:24:38 2007 +0100
- Makefile permissions
- commit b84289b595731e8851df46e893845cc1322c9b9b
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Tue May 8 14:17:07 2007 -0500
- 8641hpcn: Fix Makefile after moving pixis to board/freescale.
- The OBJTREE != SRCTREE build scenario was broken.
- This fixes it.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue May 8 15:57:43 2007 +0200
- add: reading special purpose registers
- commit 1a50f164beb065f360fbddb76029607d6b099698
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue May 8 14:52:52 2007 +0200
- add: Microblaze V5 exception handling
- commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue May 8 14:39:11 2007 +0200
- add: FSL control read and write
- commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
- Author: Piotr Kruszynski <ppk@semihalf.com>
- Date: Tue May 8 13:05:44 2007 +0200
- [Motion-PRO] Add support for I2C, EEPROM and RTC.
- commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue May 8 10:23:56 2007 +0200
- [Motion-PRO] Add ATA support. Add CF-booting commands to the default
- environment.
- commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue May 8 09:39:12 2007 +0200
- [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
- eliminates networking problems in Linux (timeouts).
- commit 1f1369c34b629be94702684d41d3fddf0f6193e7
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue May 8 09:21:57 2007 +0200
- [Motion-PRO] Enable Flat Device Tree support and modify default environment
- to allow booting of FDT-expecting kernels.
- commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 23:58:31 2007 +0200
- new: USE_MSR_INTR support
- commit 008861a2f3ef2c062744d733787c7e530a1b8761
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Mon May 7 22:36:15 2007 +0200
- [MPC5xxx] There are networking problems on the Motion-PRO board with
- current PHY initalization code (tftp timeouts all the time). This commit
- temporarily disables PHY initalization sequence to make the networking
- operational, until a fix is found.
- commit abca901869c3760b6c5fecb825db6c1d91a78a93
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 7 22:10:36 2007 +0200
- Get rid of duplicated file (see include/configs/sbc8560.h instead)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 7 22:07:08 2007 +0200
- Get rid of duplicated file (see doc/README.SBC8560 instead)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:43:10 2007 +0200
- fix: read and write MSR - repair number of parameters
- commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Mon May 7 19:42:49 2007 +0200
- [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
- A '3' got cut off in the formatting of the last patch to automatically
- change the clock speed of the system clock on sequoia board.
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:33:51 2007 +0200
- new: fsl interrupt support
- FSL_Has_data is connected to INTC.
- commit 792032baa7d625e34c981ab6df521911bd8dc861
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:30:12 2007 +0200
- fix: interrupt handler
- remove asm code
- commit f3f001a341ef185d0f13841be5b5dc3395aacc31
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:25:08 2007 +0200
- fix: remove asm code
- commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:12:43 2007 +0200
- fix: clean interrupt
- commit 42efed6130c8fcf7da881385b5427065d2801757
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 17:22:25 2007 +0200
- fix: interrupt handler for multiple sources
- commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 17:11:09 2007 +0200
- new: add writing to msr register
- commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon May 7 16:43:56 2007 +0200
- Fix an ancient CHANGELOG conflict
- commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
- Author: Timur Tabi <timur@freescale.com>
- Date: Sat May 5 08:12:30 2007 +0200
- 5xxx: write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, ftp_cpu_setup()
- should write the MAC address to mac-address and local-mac-address, if they
- exist.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
- Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
- Date: Sun Apr 29 14:01:54 2007 +0200
- [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
- MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
- message. Use PVR to distinguish between the two variants, and print proper CPU
- information.
- Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Wed Apr 25 16:01:26 2007 +0200
- [PATCH] simplify silent console
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Acked-by: Stefan Roese <sr@denx.de>
- commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
- Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Date: Mon Apr 23 15:30:39 2007 +0200
- [PATCH] Avoid assigning PCI resources from zero address
- If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
- core complains and IDE drivers fails to work. Also, assigning zero to a BAR
- was illegal according to PCI 2.1 (the later revisions seem to have excluded the
- sentence about "0" being considered an invalid address) -- so, use a reasonable
- starting value of 0x1000 (that's what the most Linux archs are using).
- Alternatively, one might have fixed the calls to pci_set_region() individually
- (some code even seems to have taken care of this issue) but that would have
- been a lot more work. :-)
- Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Mon Apr 23 14:00:11 2007 +0200
- [patch] setenv(...) can delete environmentalvariables
- update setenv() function so that entering a NULL value for the
- variable's value will delete the environmental variable
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Apr 23 13:54:24 2007 +0200
- [patch] use unsigned char in smc91111 driver for mac
- the v_mac variable in the smc91111 driver is declared as a signed char ...
- this causes problems when one of the bytes in the MAC is "signed" like 0xE0
- because when it gets printed out, you get a display like:
- 0xFFFFFFE0 and that's no good
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit ffc50f9bb194343c6303517a517708457a5eb6b8
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat May 5 18:54:42 2007 +0200
- new: FSL and MSR support #2
- commit f7e2e0eb0668136305f78bb9c21be79b48a34247
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat May 5 18:27:16 2007 +0200
- new: FSL and MSR support
- commit 2f15278c2eb911c668b4fe562130b78cf554d139
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 5 18:23:11 2007 +0200
- Coding stylke cleanup; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 5 18:05:02 2007 +0200
- Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 5 17:15:50 2007 +0200
- Make "file" command happy with some config.mk files; update CHANGELOG
- commit e3b8c78bc2489c27ae020986ef0eaca684866cef
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Sat May 5 08:32:14 2007 +0200
- ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
- The AMCC Secquoia board has been changed in a new revision from using a
- 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
- indicates the difference. This patch reads that bit and uses the correct
- clock speed for the board. This code is backward compatable will all
- prior boards. All prior boards will be read as 33.000.
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
- Author: Stefan Roese <sr@denx.de>
- Date: Sat May 5 08:29:01 2007 +0200
- ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
- Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
- for the 4k NAND boot image so define bus_frequency to 133MHz here
- which is save for the refresh counter setup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2f550ab976405300f5b07bf2890800840d0aa05f
- Author: Timur Tabi <timur@freescale.com>
- Date: Sat May 5 08:12:30 2007 +0200
- 5xxx: write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, ftp_cpu_setup()
- should write the MAC address to mac-address and local-mac-address, if they
- exist.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit a79886590593ba1d667c840caa4940c61639f18f
- Author: Thomas Knobloch <knobloch@siemens.com>
- Date: Sat May 5 07:04:42 2007 +0200
- NAND: Wrong calculation of page number in nand_block_bad()
- In case that there is no memory based bad block table available the
- function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
- nand_block_bad() directly. When parameter 'getchip' is set to zero,
- nand_block_bad() will not right shift the offset to calculate the
- correct page number.
- Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri May 4 10:02:33 2007 +0200
- Fix initrd length corruption in bootm command.
- When using FDT Images, the length of an inital ramdisk was
- overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
- Patches by Timur Tabi & Johns Daniel.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu May 3 19:43:52 2007 -0500
- mpc83xx: fix trivial error in MAKEALL
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu May 3 16:34:41 2007 +0200
- Update board configuration for STX GP3SSA board:
- Enable hush shell, environment in flash rather in EEPROM,
- more user-friendly default environment, etc.
- The simple EEPROM environment can be selected easily in the board
- config file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 24 14:37:49 2007 +0200
- Cleanup STX GP3SSA code; fix build and compile problems.
- commit 35171dc04e028ecacc23ad916a66295472555dbf
- Author: Dan Malek <dan@embeddedalley.com>
- Date: Fri Jan 5 09:15:34 2007 +0100
- Add support for STX GP3SSA (stxssa) Board
- Signed-off-by Dan Malek, <dan@embeddedalley.com>
- commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed May 2 13:31:53 2007 +0200
- macb: Don't restart autonegotiation if we already have link
- Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
- link is already up.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 04fcb5d38bc90779cd9a710d60702075986f0e29
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed May 2 13:22:38 2007 +0200
- macb: Introduce a few barriers when dealing with DMA descriptors
- There were a few theoretical possibilities that the compiler might
- optimize away DMA descriptor reads and/or writes and thus cause
- synchronization problems with the hardware. Insert barriers where
- we depend on reads/writes actually hitting memory.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit ffa621a0d12a1ccd81c936c567f8917a213787a8
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sat Feb 24 01:08:13 2007 -0600
- Cleaned up some 85xx PCI bugs
- * Cleaned up the CDS PCI Config Tables and added NULL entries to
- the end
- * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
- * Fixed 85xx PCI code to assign powar region sizes based on the
- config values (rather than hard-coding them)
- * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 6743105988fc44d5b0d30388c790607835aae7a6
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 02:54:25 2007 -0500
- Add support for the 8568 MDS board
- This included some changes to common files:
- * Add 8568 processor SVR to various places
- * Add support for setting the qe bus-frequency value in the dts
- * Add the 8568MDS target to the Makefile
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
- Author: David Updegraff <dave@cray.com>
- Date: Fri Apr 20 14:34:48 2007 -0500
- Add support for treating unknown PHYs as generic PHYs.
- When bringing up u-boot on new boards, PHY support sometimes gets
- neglected. Most PHYs don't really need any special support,
- though. By adding a generic entry that always matches if nothing
- else does, we can provide support for "unsupported" PHYs for the
- tsec.
- The generic PHY driver supports most PHYs, including gigabit.
- Signed-off-by: David Updegraff <dave@cray.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit a75af9bfd8fff0499efdbb90601cec5a2afef117
- Author: James Yang <James.Yang@freescale.com>
- Date: Wed Feb 7 15:28:04 2007 -0600
- Conditionalize 8641 Rev1.0 MCM workarounds
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Apr 30 13:59:50 2007 -0500
- Fix memory initialization on MPC8349E-mITX
- Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
- This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
- on some ITX boards, notably those with a revision 3.1 CPU.
- Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
- ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Michael Benedict <MBenedict@twacs.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Apr 30 15:26:21 2007 -0500
- mpc83xx: replace elaborate boottime verbosity with 'clocks' command
- and fix CPU: to align with Board: display text.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c1ab82669d9525998c34e802a12cad662723f22a
- Author: James Yang <James.Yang@freescale.com>
- Date: Fri Mar 16 13:02:53 2007 -0500
- Rewrote picos_to_clk() to avoid rounding errors.
- Clarified that conversion is to DRAM clocks rather than platform clocks.
- Made function static to spd_sdram.c.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8b39501d28754e72726ce7fb02310e56dbdf116a
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Apr 29 14:13:01 2007 +0200
- ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
- Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
- Date: Sun Apr 29 14:01:54 2007 +0200
- [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
- MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
- message. Use PVR to distinguish between the two variants, and print proper CPU
- information.
- Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5c5d3242935cf3543af01142627494434834cf98
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Apr 25 12:34:38 2007 -0500
- mpc83xx: minor fixups for 8313rdb introduction
- commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Wed Apr 25 16:01:26 2007 +0200
- [PATCH] simplify silent console
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 144876a380f5756f57412caf74c1d6dc201dd796
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue Apr 24 23:01:02 2007 +0200
- [PATCH] MTD partition support, JFFS2 support
- commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Apr 24 14:03:45 2007 +0200
- ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 02:37:47 2007 -0500
- Reworked 85xx speed detection code
- Changed the code to read the registers and calculate the clock
- rates, rather than using a "switch" statement.
- Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 81f481ca708ed6a56bf9c410e3191dbad581c565
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 02:24:28 2007 -0500
- Enable 8544 support
- * Add support to the Makefile
- * Add 8544 configuration support to the tsec driver
- * Add 8544 SVR numbers to processor.h
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Feb 23 17:12:25 2007 -0600
- Support 1G size on 8548
- e500v2 and newer cores support 1G page sizes.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Feb 23 17:11:16 2007 -0600
- Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
- The other pagesz constants use one letter to specify order of
- magnitude. Also change the one reference to it in mpc8548cds/init.S
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 1f9a318cea14272edd10d63739e2d326c90f430e
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Feb 23 16:28:46 2007 -0600
- Only set ddrioovcr for 8548 rev1.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sat Feb 24 01:16:45 2007 -0600
- Tweak DDR ECC error counter
- Enable single-bit error counter when memory was cleared by ddr controller.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Feb 12 13:34:55 2007 -0600
- 85xx: write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, ftp_cpu_setup()
- should write the MAC address to mac-address and local-mac-address, if they
- exist.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 01:44:44 2007 -0500
- Some 85xx cpu cleanups
- * Cleaned up the TSR[WIS] clearing
- * Cleaned up DMA initialization
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 01:32:22 2007 -0500
- Add cpu support for the 8544
- Recognize new SVR values, and add a few register definitions
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Apr 11 16:51:02 2007 -0500
- Add MPC8544DS basic port board files.
- Add board port under new board/freescale directory
- structure and reuse existing PIXIS FPGA support there.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Apr 11 16:50:57 2007 -0500
- Add MPC8544DS main configuration file.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
- Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Date: Wed Dec 27 22:07:15 2006 +0300
- Fix PCI I/O space mapping on Freescale MPC85x0ADS
- The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
- 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
- describing the local address window used for the PCI I/O space accesses -- fix
- this and carry over the necessary changes into the MPC8560ADS code since the
- PCI I/O space mapping was also broken for this board (by the earlier commit
- 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
- the PCI I/O space must be mapped to all the MPC85xx board config. headers.
- Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- board/mpc8540ads/init.S | 4 ++--
- board/mpc8560ads/init.S | 4 ++--
- include/configs/MPC8540ADS.h | 5 ++---
- include/configs/MPC8541CDS.h | 2 +-
- include/configs/MPC8548CDS.h | 2 +-
- include/configs/MPC8560ADS.h | 8 ++++----
- 6 files changed, 12 insertions(+), 13 deletions(-)
- commit 96629cbabdb727d4a5e62542deefc01d498db6dc
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Tue Dec 5 16:42:30 2006 +0800
- u-boot: Fix e500 v2 core reset bug
- The following patch fixes the e500 v2 core reset bug.
- For e500 v2 core, a new reset control register is added to reset the
- processor.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 63247a5acd58032e6cf33f525bc3923b467bac88
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Wed Dec 20 11:01:00 2006 +0800
- u-boot: v2: Remove the fixed TLB and LAW entrynubmer
- Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
- entry number to control the loop. This can reduce the potential risk
- for the 85xx processor increasing its TLB adn LAW entry number.
- Signed-off-by: Swarthout Edward <swarthout@freescale.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Mon Dec 18 17:01:04 2006 +0800
- u-boot: Fix the 85xxcds tsec bug
- Fix the 85xxcds tsec bug.
- When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 7337b237ffc4aaf1b9467024fe472a880d852598
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Fri Dec 15 14:43:31 2006 +0800
- u-boot: Fix CPU2 errata on MPC8548CDS board
- This patch apply workaround of CPU2 errata on MPC8548CDS board.
- Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
- commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
- Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
- Date: Mon Dec 18 16:25:15 2006 +0800
- u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
- This patch disables MPC8548CDS 2T_TIMING for DDR by default.
- Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
- commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Thu Dec 14 14:14:55 2006 +0800
- u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
- Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
- board.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 96b8a05432f346f36493535c85320b70ec9c7c1b
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:54:15 2007 -0500
- mpc83xx: Add MPC8313ERDB support.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 49ea3b6eafe606285ae4d5c378026153dde53200
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:21 2007 -0500
- mpc83xx: Add generic PCI setup code.
- Board code can now request the generic setup code rather than having to
- copy-and-paste it for themselves. Boards should be converted to use this
- once they're tested with it.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:19 2007 -0500
- mpc83xx: Add 831x support to speed.c.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:18 2007 -0500
- mpc83xx: Add 831x support to global_data.h
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:16 2007 -0500
- mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
- Rather than misleadingly define PVR_83xx as the specific type of 83xx
- being built for, the PVR of each core revision is defined. checkcpu() now
- prints the core that it detects, rather than aborting if it doesn't find
- what it thinks it wants.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:15 2007 -0500
- mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit d87c57b201b4572d16f1b642998faa00c9912b16
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:31:55 2007 -0500
- mpc83xx: Add register definitions for MPC831x.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 7fc4c71a143be8666d70803fb25ae60379c95622
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Apr 23 15:39:59 2007 +0200
- Fix file mode
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 38257988abfe74d459ca2ad748b109ca04e4efe1
- Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Date: Mon Apr 23 15:30:39 2007 +0200
- [PATCH] Avoid assigning PCI resources from zero address
- If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
- core complains and IDE drivers fails to work. Also, assigning zero to a BAR
- was illegal according to PCI 2.1 (the later revisions seem to have excluded the
- sentence about "0" being considered an invalid address) -- so, use a reasonable
- starting value of 0x1000 (that's what the most Linux archs are using).
- Alternatively, one might have fixed the calls to pci_set_region() individually
- (some code even seems to have taken care of this issue) but that would have
- been a lot more work. :-)
- Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit afb903a2eb9436baa9270ccc0c27082d86497d89
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Mon Apr 23 14:00:11 2007 +0200
- [patch] setenv(...) can delete environmentalvariables
- update setenv() function so that entering a NULL value for the
- variable's value will delete the environmental variable
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 36f104e5caa747d568eff26b369565af57c2ffa6
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Apr 23 13:54:24 2007 +0200
- [patch] use unsigned char in smc91111 driver for mac
- the v_mac variable in the smc91111 driver is declared as a signed char ...
- this causes problems when one of the bytes in the MAC is "signed" like 0xE0
- because when it gets printed out, you get a display like:
- 0xFFFFFFE0 and that's no good
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Mon Apr 23 13:10:52 2007 +0200
- USB: (Another) delay for crappy USB keys.
- Some USB keys are slow in giving back an answer when the Root HUB
- enables power lines.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Apr 23 12:00:22 2007 +0200
- Remove BOARDLIBS usage completely
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 32556443840f127170e4baa8bdd5b567039f6c36
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Apr 21 21:07:22 2007 +0200
- [PATCH] SystemACE support for Microblaze
- commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Apr 21 21:02:40 2007 +0200
- 16bit read/write little endian
- commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Apr 21 20:53:31 2007 +0200
- Change ML401 parameters - Xilinx BSP
- commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Feb 28 05:37:29 2007 -0600
- mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Fri Jan 19 10:42:37 2007 +0800
- Enable LAWs for MPC8641 PCI-Ex2.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit bd7851ce1e1f140665b520026abf1042968b1102
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Apr 20 14:12:26 2007 -0500
- mpc86xx; Write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, ftp_cpu_setup()
- should write the MAC address to mac-address and local-mac-address, if they
- exist.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7dbdf28b8bd855a8530dc3292e4982575a197060
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Apr 20 14:11:38 2007 -0500
- mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 14da5f7675bbb427c469e3f45006e027b6e21db9
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 20 17:43:28 2007 +0200
- Cleanup compiler warnings, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6923565db12af34fd5e02d354ee65a8c78ac460f
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Apr 20 12:01:47 2007 +0200
- Fix breakage of NC650 board with respect to nand support.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 39f23cd90947639ac278a18ff277ec786b5ac167
- Author: Domen Puncer <domen.puncer@telargo.com>
- Date: Fri Apr 20 11:13:16 2007 +0200
- [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
- G2 core reference manual says decrementer and time base
- are decreasing/increasing once every 4 bus clock cycles.
- Lets fix it, so time in Linux won't run twice as fast
- Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Thu Apr 19 23:14:39 2007 -0400
- Fix serious pointer bug with bootm and reserve map.
- What was suppose to be a stack variable was declared as a pointer,
- overwriting random memory.
- Also moved the libfdt.a requirement into the main Makefile. That is
- The U-Boot Way.
- commit d21686263574e95cb3e9e9b0496f968b1b897fdb
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Apr 19 09:53:52 2007 +0200
- ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
- Previous versions used full wait states for the chip select #1 which
- is connected to the Xilinix SystemACE controller on the AMCC Katmai
- evaluation board. This leads to really slow access and therefore low
- performance. This patch now sets up the chip select a lot faster
- resulting in much better read/write performance of the Linux driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 37837828d89084879bee2f2b8c7c68d4695940df
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 17:49:29 2007 +0200
- Clenaup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 17:20:58 2007 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 17:07:26 2007 +0200
- Cleanup, update CHANGELOG
- Sigend-off-by: Wolfgang Denk <wd@denx.de>
- commit 5f6c732affea9647762d27a4617a2ae64c52dceb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 16:17:46 2007 +0200
- Update CHANGELOG
- commit ad4eb555671d97f96dc56eab55103b1f86874b01
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 14:30:39 2007 +0200
- MCC200 board: remove warning which is obsolete after PSoC firmware changes
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3747a3f010b2b1442dec3e871c69788b6017aaae
- Author: Domen Puncer <domen.puncer@telargo.com>
- Date: Wed Apr 18 12:11:05 2007 +0200
- [PATCH] icecube/lite5200b: document wakeup from low-power support
- Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
- commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 18 12:07:47 2007 +0200
- ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 18 12:05:59 2007 +0200
- ppc4xx: Add output for bootrom location to 405EZ ports
- Now 405EZ ports also show upon bootup from which boot device
- they are configured to boot:
- U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
- CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
- Bootstrap Option E - Boot ROM Location EBC (32 bits)
- 16 kB I-Cache 16 kB D-Cache
- Board: Acadia - AMCC PPC405EZ Evaluation Board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Apr 17 13:30:33 2007 +0100
- Move ppearse to ARM board list
- Add Konstantin Kletschke for scb9328.
- Signed-off-by: Peter Pearse <peter.pearse@arm.com>
- commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
- Author: Domen Puncer <domen.puncer@telargo.com>
- Date: Mon Apr 16 14:00:13 2007 +0200
- [PATCH] icecube/lite5200b: wakeup from low-power support
- U-Boot part of Lite5200b low power mode support.
- Puts SDRAM out of self-refresh and transfers control to
- address saved at physical 0x0.
- Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sun Apr 15 13:54:26 2007 -0400
- Fix the ft_cpu_setup() property settings.
- Use "setter" functions instead of flags, cleaner and more flexible.
- It also fixes the problem noted by Timur Tabi that the ethernet MAC
- addresses were all being set incorrectly to the same MAC address.
- commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Apr 14 22:51:24 2007 -0400
- Improve the bootm command for CONFIG_OF_LIBFDT
- In bootm, create the "/chosen" node only if it doesn't already exist
- (better matches the previous behavior).
- Update for proper reserved memory map handling for initrd.
- commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Apr 14 22:46:41 2007 -0400
- Add some utilities to manipulate the reserved memory map.
- commit 8048cdd56f04a756eeea4951f402bf5cc33785db
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Apr 14 21:16:54 2007 +0200
- Update CHANGELOG
- commit 8e6875183cdca91c134408d119d4abcd48ef6856
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 18:56:46 2006 +0100
- AVR32: Enable MMC support
- Set up the portmux for the MMC interface and enable the MMC driver
- along with support for DOS partitions, ext2 and FAT filesystems.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit fc26c97bb6df41b4a95662c34054fe912387bf38
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Jan 20 10:03:53 2006 +0100
- Atmel MCI driver
- Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
- The AT91 ARM-based CPUs use basically the same hardware, so it should
- be possible to share this driver, but no effort has been made so far.
- Hardware documentation can be found in the AT32AP7000 data sheet,
- which can be downloaded from
- http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 18:55:37 2006 +0100
- AVR32: Add clk and gpio infrastructure for mmci
- Implement functions for configuring the mmci pins, as well as
- functions for getting the clock rate of the mmci controller.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 7fac3f69e9f05c5e5326681976c35d129324c4de
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 18:53:56 2006 +0100
- Enable partition support with MMC
- Include implementations of init_part() and get_partition_info() when
- CONFIG_MMC is set.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 17:14:30 2006 +0100
- AVR32: Enable networking
- Implement MACB initialization for AVR32 and ATSTK1000, and turn
- everything on, including the MACB driver.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Jan 20 10:03:34 2006 +0100
- Atmel MACB ethernet driver
- Driver for the Atmel MACB on-chip ethernet controller.
- This driver has been tested on the ATSTK1000 board with a AT32AP7000
- CPU. It should probably work on AT91SAM926x as well with some minor
- modifications.
- Hardware documentation can be found in the AT32AP7000 data sheet,
- which can be downloaded from
- http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 16:56:14 2006 +0100
- AVR32: Add clk and gpio infrastructure for macb0 and macb1
- Implement functions for configuring the macb0 and macb1 pins, as
- well as functions for getting the clock rate of the various
- busses the macb ethernet controllers are connected to.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit d5acb95b16a0a74c643524342c3437e765426d05
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 15:39:15 2006 +0100
- AVR32: Implement simple DMA memory allocator
- Implement dma_alloc_coherent() which returns cache-aligned
- uncacheable memory.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 91975b0fea773c9e681fea8cf3349669f27685ee
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 15:46:02 2006 +0100
- Import <linux/mii.h> from the Linux kernel
- Instead of creating yet another set of MII register definitions
- in the macb driver, here's a complete set of definitions for everyone
- to use.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 1b804b229556a4d862da93c0ec94e79419364b2c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Mar 21 19:47:36 2007 +0100
- AVR32: Include more commands for ATSTK1000
- Include the imi, imls and jffs commands sets by default on ATSTK1000.
- Also define CONFIG_BOOTARGS to something more useful, define
- CONFIG_BOOTCOMMAND and enable autoboot by default.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Mar 21 19:44:48 2007 +0100
- AVR32: Provide a definition of struct stat
- Copy the definition of struct stat from the Linux kernel.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 12f099c08167a7a51aeee623bc16dafd0841271c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 14:46:06 2006 +0100
- AVR32: Use initdram() instead of board_init_memories()
- Conform to the "standard" interface and use initdram() instead of
- board_init_memories() on AVR32. This enables us to get rid of the
- sdram_size member of the global_data struct as well.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Nov 20 15:53:10 2006 +0100
- AVR32: Relocate u-boot to SDRAM
- Relocate the u-boot image into SDRAM like everyone else does. This
- means that we can handle much larger .data and .bss than we used to.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit df548d3c3e2bbc40258713167859ffc2ce99a900
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Nov 19 18:06:53 2006 +0100
- AVR32: Resource management rewrite
- Rewrite the resource management code (i.e. I/O memory, clock gating,
- gpio) so it doesn't depend on any global state. This is necessary
- because this code is heavily used before relocation to RAM, so we
- can't write to any global variables.
- As an added bonus, this makes u-boot's memory footprint a bit smaller,
- although some functionality has been left out; all clocks are enabled
- all the time, and there's no checking for gpio line conflicts.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 18 18:01:13 2006 +0100
- AVR32: Clean up memory-map.h for at32ap7000
- Convert spaces to tabs (must have missed this one last time around),
- sort the entries by address and group them together by bus
- connectivity.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 28c699ef69f4b6cdf252e4747b7b590028a88981
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 18 17:32:31 2006 +0100
- AVR32: Build position-independent u-boot
- Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
- position independent. This will make relocation a lot easier.
- -mno-init-got means that gcc shouldn't emit code to load the GOT
- address into r6 in every function prologue. We do it once and for
- all in the early startup assembly code, so enabling this option
- makes u-boot a bit faster and smaller.
- The assembly parts have always been position-independent, so no code
- changes should be necessary.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 18 17:24:31 2006 +0100
- AVR32: Use avr32-linux- cross-compilation prefix by default
- It doesn't really matter which toolchain you use to compile u-boot,
- but the avr32-linux one is probably what most people have installed.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 18 17:15:30 2006 +0100
- AVR32: Split start_u_boot into board_init_f and board_init_r
- Split the avr32 initialization code into a function to run before
- relocation, board_init_f and a function to run after relocation,
- board_init_r. For now, board_init_f simply calls board_init_r
- at the end.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Sat Apr 14 05:26:48 2007 +0200
- [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
- clear the Display after reset.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
- Author: Denis Peter <d.peter@mpl.ch>
- Date: Fri Apr 13 09:13:33 2007 +0200
- [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
- Fix bug introduced by "Fix get_partition_info() parameter error in all
- other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
- to use diskboot or scsiboot form another device than 0.
- Signed-off-by: Denis Peter <d.peter@mpl.ch>
- commit 0b94504d22e70f537c17a0d38c87edb6e370977d
- Author: Greg Lopp <lopp@pobox.com>
- Date: Fri Apr 13 08:02:24 2007 +0200
- [PATCH] Fix use of "void *" for block dev read/write buffer pointers
- Signed-of-by: Greg Lopp <lopp@pobox.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
- Author: Xie Xiaobo <r63061@freescale.com>
- Date: Fri Mar 9 19:08:25 2007 +0800
- Fix two bugs for MPC83xx DDR2 controller SPD Init
- There are a few bugs in the cpu/mpc83xx/spd_sdram.c
- the first bug is that the picos_to_clk routine introduces a huge
- rounding error in 83xx.
- the second bug is that the mode register write recovery field is
- tWR-1, not tWR >> 1.
- commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Thu Apr 12 14:15:59 2007 +0200
- ppc4xx: Fix i2c divisor calcularion for PPC4xx
- This patch fixes changes the i2c_init(...) function to use the function
- get_OPB_freq() rather than calculating the OPB speed by
- sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
- specific per processor. The prior method was not and so was calculating
- the wrong speed for some PPC4xx processors.
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 11 17:25:01 2007 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 51056dd9863e6a1bc363afbbe1775c58cd967418
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 11 17:22:55 2007 +0200
- Update for SC3 board
- * Make IDE timeout configurable through ide_reset_timeout variable.
- * Use Newline as "password" string
- * Use just a single partition in NAND flash
- commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Mon Jan 22 12:37:30 2007 -0600
- Add PIXIS FPGA support for MPC8641HPCN board.
- Move the 8641HPCN's PIXIS code to the new directory
- board/freescale/common/ as it will be shared by
- future boards not in the same processor family.
- Write a "pixis_reset" command that utilizes the FPGA
- reset sequencer to support alternate soft-reset options
- such as using the "alternate" flash bank, enabling
- the watch dog, or choosing different CPU frequencies.
- Add documentation for the pixis_reset to README.mpc8641hpcn.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Apr 6 14:19:43 2007 -0400
- Moved fdt command support code to fdt_support.c
- ...in preparation for improving the bootm command's handling of fdt blobs.
- Also cleaned up some coding sloppiness.
- commit 6679f9299534e488a171a9bb8f9bb891de247aab
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Apr 6 14:17:14 2007 -0400
- libfdt: Make fdt_check_header() public
- Changed _fdt_check_header() to fdt_check_header() and made it part of
- the interface - it is a useful routine.
- Also did some asthetics cleanup to the include files (headers).
- commit c0707ce65677650b5ceab0500ee50ae5168afef2
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:34:06 2007 +0800
- [Blackfin][PATCH] Kill off a bunch of common local prototypes
- commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:33:04 2007 +0800
- [Blackfin][PATCH] Fix dynamic CPLB generation issue
- commit 0445e3a264251d75b1be45ef713c70726a2952f0
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:31:47 2007 +0800
- [Blackfin][PATCH] minior cleanup
- commit 155fd766573981090e638b493d5857562151862e
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:31:18 2007 +0800
- [Blackfin][PATCH] Fix copyright and update license
- commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:30:25 2007 +0800
- [Blackfin][PATCH] Add BF537 EMAC driver initialization
- commit 889256e8604e0c68db1d866d720894dffede9df6
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:29:55 2007 +0800
- [Blackfin][PATCH] call real the system synchronize instruction
- commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:29:17 2007 +0800
- [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
- commit dfeeab2cd680df047e68e723b246adf6f33bb556
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:28:34 2007 +0800
- [Blackfin][PATCH]: fix flash unaligned copy issue
- commit 443feb740584e406efa203af909fe2926608e8d5
- Author: Igor Marnat <marny@rambler.ru>
- Date: Wed Mar 21 09:55:01 2007 +0300
- Update usage of 'nc' in README.NetConsole
- Added information about usage of NetConsole on systems where the -l and -p
- switches are mutually exclusive.
- Signed-off-by: Igor Marnat <marny@rambler.ru>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 31c98a88228021b314c89ebb8104fb6473da4471
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 4 02:09:30 2007 +0200
- Minor coding style cleanup.
- commit 94abd7c0583ebe01e799b25f451201deeaab550d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 4 01:49:15 2007 +0200
- Minor cleanup.
- commit 822af351ad2babc7d99033361a5fcacd30f6bc78
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Tue Apr 3 14:27:18 2007 +0200
- Support for the Philips ISP116x HCD (Host Controller Driver)
- Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
- commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Apr 3 14:27:08 2007 +0200
- USB: cleanup monahans usb support. Remove dead code.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit a65c5768e5537530bd1780af3d3fddc3113a163c
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Apr 2 10:09:30 2007 +0200
- ppc4xx: Change SysACE address on Katmai
- With this new base address of the Xilinx SystemACE controller
- the Linux driver will be easier to adapt, since it can now be
- mapped via the "normal" ioremap() call.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 14:30:53 2007 -0400
- Fix some minor whitespace violations.
- commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:23:51 2007 -0400
- Add a flattened device tree (fdt) command (2 of 2)
- Modifications to the existing code to support the new fdt command.
- commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:22:10 2007 -0400
- Add a flattened device tree (fdt) command (1 of 2)
- The fdt command uses David Gibson's libfdt library to manipulate as well
- as print the flattened device tree. This patch is the new command,
- the second part is the modifications to the existing code.
- commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:13:43 2007 -0400
- libfdt: Enhanced and published fdt_next_tag()
- Enhanced the formerly private function _fdt_next_tag() to allow stepping
- through the tree, used to produce a human-readable dump, and made
- it part of the published interface.
- Also added some comments.
- commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:05:39 2007 -0400
- libfdt: Customizations for use by u-boot.
- Changes to David Gibson's original source to fit into u-boot's
- environment. No functionality changes.
- commit 35748177c64a4a83a00057e93bb33e40278a2a96
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:00:56 2007 -0400
- libfdt: Import libfdt source (2 of 2)
- This adds the applicable libfdt source files (unmodified) and a README
- to explain where the source came from.
- commit 7cd5da0fe877e7171a4cdd44880bce783132871a
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 11:59:59 2007 -0400
- libfdt: Import libfdt source (1 of 2)
- This adds the applicable libfdt source files (unmodified) and a README
- to explain where the source came from.
- commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 13:16:23 2007 +0200
- ppc4xx: Update Katmai bootstrap command
- Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
- is selected.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cabee756a6532986729477c3cc1ea16ef8517ad2
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 13:15:06 2007 +0200
- ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
- Additional RAM information is now printed upon powerup, like
- DDR2 frequency and CAS latency.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 60723803431ac75cad085690789e433d5ab9174e
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 08:48:36 2007 +0200
- ppc4xx: Change Yucca config file to support ECC
- With the updated 44x DDR2 driver the Yucca board now supports
- ECC generation and checking.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 490e5730c674b20d708b783a2c5ffd7208f83873
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 08:47:34 2007 +0200
- ppc4xx: Fix "bootstrap" command for Katmai board
- The board specific "bootstrap" command is now fixed and can
- be used for the AMCC Katmai board to configure different
- CPU/PLB/OPB frequencies.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 08:46:08 2007 +0200
- ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
- Fix a bug in the auto calibration routine. This driver now runs
- more reliable with the tested modules. It's also tested with
- 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 342cd097be1e7affe82f42ab3da220959a699e64
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 30 22:52:09 2007 +0200
- [PATCH] Clean include dependence
- commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 30 22:42:45 2007 +0200
- [CLEAN] Remove inefficient Suzaku code
- commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 28 15:03:16 2007 +0200
- Merge some AMCC make targets to keep the top-level Makefile smaller
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 28 14:52:12 2007 +0200
- i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
- The "old" i2c commands (iprobe, imd...) are now compiled in again,
- even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
- config option.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue Mar 27 00:32:16 2007 +0200
- PATCH: Resolve GPL license problem
- commit ae00bb4b2944dc64a485ed72a19754b11af7c223
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Mon Mar 26 12:03:36 2007 +0200
- PXA: pxa27x USB OHCI support
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Mar 26 11:21:05 2007 +0200
- USB: remove the S3C24X0_merge #define, which was introduced while
- merging OHCI drivers.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 1798049522f594013aea29457d46794298c6ae15
- Author: Michal Simek <root@monstr.eu>
- Date: Mon Mar 26 01:39:07 2007 +0200
- Support for XUPV2P board
- Reset support
- BSP autoconfig support
- commit 0d974d5297349504a2ddfa09314be573b5df320a
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 24 15:57:09 2007 +0100
- [PATCH] Add 4xx GPIO functions
- This patch adds some 4xx GPIO functions. It also moves some of the
- common code and defines into a common 4xx GPIO header file.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 24 15:55:58 2007 +0100
- [PATCH] Small Sequoia cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 24 15:45:34 2007 +0100
- [PATCH] Clean up 40EZ/Acadia support
- This patch cleans up all the open issue of the preliminary
- Acadia support.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Dec 12 11:02:20 2006 -0600
- Fix 8641HPCN problem with ld version 2.16
- (Dot outside sections problem).
- This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Thu Dec 7 10:35:55 2006 -0600
- Set Rev 2.x 86xx PIC in mixed mode.
- Prevent false interrupt from hanging Linux as MSR[EE] is set
- to enable interrupts by changing the PIC out of the default
- pass through mode into mixed mode.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
- Author: Jason Jin <jason.jin@freescale.com>
- Date: Thu Dec 7 10:32:35 2006 -0600
- Add flash cmd function to 8641HPCN ramboot
- Also fixes some commmand for 8641 HPCN ramboot case.
- Signed-off-by: Jason Jin <jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
- Author: Ed Swarthout <ed.swarthout@freescale.com>
- Date: Thu Dec 7 10:34:14 2006 -0600
- Add support for 8641 Rev 2 silicon.
- Without this patch, I am unable to get to the prompt on rev 2 silicon.
- Only set ddrioovcr for rev1.
- Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 44ba464b99001f8bd1c456a1e9d59726252f707a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 22 00:13:12 2007 +0100
- Code cleanup / re-insert previous Copyright entries.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 21 23:26:15 2007 +0100
- Code cleanup. Update CHANGELOG
- commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 21 14:54:29 2007 +0100
- ppc4xx: Fix file mode of include/configs/acadia.h
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d5f4614c9350d9333e575100fb250aab774d0258
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Mar 21 14:41:46 2007 +0100
- SPC1920: fix small clock routing bug
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 21 13:39:57 2007 +0100
- [PATCH] Add AMCC Acadia (405EZ) eval board support
- This patch adds support for the new AMCC Acadia eval board.
- Please note that this Acadia/405EZ support is still in a beta stage.
- Still lot's of cleanup needed but we need a preliminary release now.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e01bd218b00af73499331a1a701625a852cd286f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 21 13:38:59 2007 +0100
- [PATCH] Add AMCC PPC405EZ support
- This patch adds support for the new AMCC 405EZ PPC. It is in
- preparation for the AMCC Acadia board support.
- Please note that this Acadia/405EZ support is still in a beta stage.
- Still lot's of cleanup needed but we need a preliminary release now.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Wed Mar 21 08:45:17 2007 +0100
- [PATCH] TQM8272: dont change the bits given from the HRCW
- for the SIUMCR and BCR Register.
- Fix the calculation for the EEprom Size
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 654589873dbafcf104dff133ce0d03a4506e9cc3
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Tue Mar 20 18:16:24 2007 +0800
- [Blackfin][PATCH] Add BF561 EZKIT board support
- commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 19 22:55:58 2007 +0800
- [Blackfin][PATCH] minor cleanup
- commit 389b6bb50f745bf5038ce030300d8a8512e96f79
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Mar 19 13:10:08 2007 +0100
- Remove obsoleted POST files.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 19 01:26:11 2007 +0800
- [PATCH] Add flash chip M29W320ET/B support
- commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 19 01:24:52 2007 +0800
- [Blackfin][PATCH] Add BF537 stamp board support
- commit 8423e5e31a7235d05a482627315fb11d49c17bd7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Mar 16 21:11:42 2007 +0100
- [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
- Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
- DDR memory are dynamically programmed matching the total size
- of the equipped memory (DIMM modules).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 76d1466f918b881cda2d259254761e73885093c2
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Mar 13 13:38:05 2007 +0100
- [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
- boards in terms of unification.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 13 16:05:55 2007 +0100
- Make SC3 board build with 'make O='; use 'addcons' consistently
- (SC3 and Jupiter used to use 'addcon' instead).
- Signed-off-by: Wolfgang Denk wd@denx.de
- commit 8502e30a28e492c756ea2d7df0ace026388fce4b
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Tue Mar 13 09:40:59 2007 +0100
- [PATCH] update board config for jupiter Board:
- added Hush Shell,
- CONFIG_CMDLINE_EDITING,
- CFG_ENV_ADDR_REDUND activated
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 12 12:11:55 2007 +0800
- [Blackfin][PATCH] minor cleanup
- commit bfa5754a58477ac917d21527cd0f079d87cf188e
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 12 01:42:06 2007 +0800
- [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
- commit 8440bb14581a294375c34b91b42512f9753d1130
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 12 00:25:14 2007 +0800
- [Blackfin][PATCH] code cleanup
- commit cfc67116a706fd18b8f6a9c11a16753c5626d689
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Mar 11 13:48:24 2007 +0100
- [Microblaze][PATCH] part 2
- timer support
- interrupt controller support
- flash support
- ethernet support
- cache support
- board information support
- env support
- booting image support
- adding support for Xilinx ML401
- commit 76316a318de91f6184e7c22a10e02d275ade2441
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Mar 11 13:42:58 2007 +0100
- [Microblaze][PATCH]
- timer support
- interrupt controller support
- flash support
- ethernet support
- cache support
- board information support
- env support
- booting image support
- adding support for Xilinx ML401
- commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Sat Mar 10 23:49:29 2007 +0800
- [Blackfin][PATCH] code cleanup
- commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
- Author: Aubrey.Li <aubrey.adi@gmail.com>
- Date: Fri Mar 9 13:40:56 2007 +0800
- [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
- commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
- Author: Aubrey.Li <aubrey.adi@gmail.com>
- Date: Fri Mar 9 13:38:44 2007 +0800
- [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
- commit 992423ab43c2bcf6b704853bd00af77450915e20
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 23:00:08 2007 +0100
- ppc4xx: Fix file mode of sequoia.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit eb92f613556800f7483666db09d9a237ad911d4a
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Mar 8 22:52:51 2007 +0100
- Minor cleanup.
- commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
- Author: John Otken john@softadvances.com <john@softadvances.com>
- Date: Thu Mar 8 09:39:48 2007 -0600
- ppc4xx: Clear Sequoia/Rainier security engine reset bits
- Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
- commit 650a330dd2539130c8c324791e2f9f75aed79d4e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Mar 8 16:26:52 2007 +0100
- [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d9fc703246840c4b268debf48c334ba55c597dc0
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Mar 8 16:25:47 2007 +0100
- [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit ced5b9029043397348cdc88e0cfcd6b1f629250b
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Mar 8 16:23:11 2007 +0100
- [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Mar 8 16:20:32 2007 +0100
- [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit f9fc6a5852a6335840882fa2111925010eea1abe
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Mar 7 15:32:01 2007 +0100
- fixed ethernet phy configuration for plu405 board
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 769104c9356594deb2092e204a39c05b33202d6c
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Mar 8 21:49:27 2007 +0100
- Minor cleanup
- commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 10:13:16 2007 +0100
- [PATCH] Update AMCC Luan 440SP eval board support
- The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
- inititializition. This includes DDR auto calibration and support
- for different DIMM modules, instead of the fixed setup used in
- the earlier version.
- This patch also enables the cache in FLASH for the startup
- phase of U-Boot (while running from FLASH). After relocating to
- SDRAM the cache is disabled again. This will speed up the boot
- process, especially the SDRAM setup, since there are some loops
- for memory testing (auto calibration).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2f5df47351910a2936c7741cf111855829200943
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 10:10:18 2007 +0100
- [PATCH] Update AMCC Yucca 440SPe eval board support
- The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
- inititializition. This includes DDR auto calibration and support
- for different DIMM modules, instead of the fixed setup used in
- the earlier version.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2721a68a9ea91f1e494649ce68b2577261f578e2
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 10:07:18 2007 +0100
- ppc4xx: Small AMCC Katmai 440SPe update
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit df294497479b1dca6dd86318b2a912f72fede0df
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 10:06:09 2007 +0100
- ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 83853178bd36bca6f0f8f1331476620c84a587fc
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Mar 7 12:14:50 2007 -0600
- net - Support ping reply when processing net-loop
- Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
- This permits the ping command to test the phy interface when the phy
- is put in loopback mode (typically by setting register 0 bit 14).
- It also allows the port to respond to an external ping when u-boot is
- processing some other net command (such as tftp). This is useful when
- tftp appears to hang.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit fa1aef15bcd47736687be1af544506e90fba545d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 7 16:43:00 2007 +0100
- [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
- Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
- DDR memory are dynamically programmed matching the total size
- of the equipped memory (DIMM modules).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e2ebe696818939e2b974628be9c921ea3fe9de13
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 7 16:39:36 2007 +0100
- [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
- This patch fixes a problem that occurs when 2 DIMM's are
- used. This problem was first spotted and fixed by Gerald Jackson
- <gerald.jackson@reaonixsecurity.com> but this patch fixes the
- problem in a little more clever way.
- This patch also adds the nice functionality to dynamically
- create the TLB entries for the SDRAM (tlb.c). So we should
- never run into such problems with wrong (too short) TLB
- initialization again on these platforms.
- As this feature is new to the "old" 44x SPD DDR driver, it
- has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 39218433983417b9df087976a79e3f80dd5e83d6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 7 16:33:44 2007 +0100
- UC101: fix compiler warnings
- commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Mar 7 16:19:46 2007 +0100
- HMI1001: fix build error, cleanup compiler warnings.
- commit ad5bb451ade552c44bef9119d907929ebc2c126f
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Mar 6 18:08:43 2007 +0100
- Restructure POST directory to support of other CPUs, boards, etc.
- commit a5284efd125967675b2e9c6ef7b95832268ad360
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Mar 6 18:01:47 2007 +0100
- Fix HOSTARCH handling.
- Patch by Mike Frysinger, Mar 05 2007
- commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 6 07:47:04 2007 +0100
- [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
- As provided by the AMCC applications team, this patch optimizes the
- DDR2 setup for 166MHz bus speed. The values provided are also save
- to use on a "normal" 133MHz PLB bus system. Only the refresh counter
- setup has to be adjusted as done in this patch.
- For this the NAND booting version had to include the "speed.c" file
- from the cpu/ppc4xx directory. With this addition the NAND SPL image
- will just fit into the 4kbytes of program space. gcc version 4.x as
- provided with ELDK 4.x is needed to generate this optimized code.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Mar 4 01:36:05 2007 +0100
- Some code cleanup.
- commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Feb 28 00:02:04 2007 -0600
- mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
- (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
- commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Feb 27 23:51:42 2007 -0600
- mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
- The config value for:
- * CFG_ACR_PIPE_DEP
- * CFG_ACR_RPTCNT
- * CFG_SPCR_TSEC1EP
- * CFG_SPCR_TSEC2EP
- * CFG_SCCR_TSEC1CM
- * CFG_SCCR_TSEC2CM
- Were not being used when setting the appropriate register
- Added:
- * CFG_SCCR_USBMPHCM
- * CFG_SCCR_USBDRCM
- * CFG_SCCR_PCICM
- * CFG_SCCR_ENCCM
- To allow full config of the SCCR.
- Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
- that were just bogus.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d51b3cf371cd441030460ef19d36b2924c361b1a
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Feb 22 20:06:57 2007 -0600
- mpc83xx: update [local-]mac-address properties on UEC based devices
- 8360 and 832x weren't updating their [local-]mac-address
- properties. This patch fixes that.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 61f4f912acbe60776c5e00df1ec94094ce672957
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Feb 13 10:41:42 2007 -0600
- mpc83xx: write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, this patch
- updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
- This function already updates local-mac-address.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 22d71a71f57fd5d38b27ac3848e50d790360a598
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Feb 27 18:41:08 2007 -0600
- mpc83xx: add command line editing by default
- commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Feb 14 19:50:53 2007 -0600
- mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
- Disable G1TXCLK, G2TXCLK h/w buffers. This patch
- fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
- Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
- commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
- Author: Xie Xiaobo <r63061@freescale.com>
- Date: Wed Feb 14 18:27:17 2007 +0800
- mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
- The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
- it pass DDR/DDR2 compliance tests.
- Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
- commit b110f40bd180c6b560276589beedf753e97c46ce
- Author: Xie Xiaobo <r63061@freescale.com>
- Date: Wed Feb 14 18:27:06 2007 +0800
- mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
- MPC8360E rev2.0 have new spridr,and PVR value,
- The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
- Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
- commit 8d172c0f0d85998a256a95b7459a5403a30380ed
- Author: Xie Xiaobo <r63061@freescale.com>
- Date: Wed Feb 14 18:26:44 2007 +0800
- mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
- MPC8349E rev3.1 have new spridr,and PVR value,
- The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
- Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
- commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
- Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
- Date: Wed Jan 31 11:04:19 2007 +0100
- mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
- Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
- which is used to se if an slave will ACK after receiving its address.
- Correct i2c probing to use this method as the old method could upset
- a slave as it wrote a data byte to it.
- Add a small delay in i2c_init() to let the controller
- shutdown any ongoing I2C activity.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 31 15:54:29 2007 -0600
- mpc83xx: Add support for the MPC8349E-mITX-GP
- Add support for the MPC8349E-mITX-GP, a stripped-down version of the
- MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
- HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit fab16807adad350f618024350c6950165c247c72
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 31 15:54:20 2007 -0600
- mpc83xx: Delete sdram_init() for MPC8349E-mITX
- There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
- never does anything. This patch deletes it.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
- Author: Dave Liu <daveliu@freescale.com>
- Date: Fri Jan 19 10:43:26 2007 +0800
- mpc83xx: Fix the LAW1/3 bug
- The patch solves the alignment problem of the local bus access windows to
- render accessible the memory bank and PHY registers of UPC 1 (starting at
- 0xf801 0000). What we actually did was to adjust the sizes of the bus
- access windows so that the base address alignment requirement would be met.
- Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
- Signed-off-by: Gridish Shlomi <gridish@freescale.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 97c4b397dce236a7318b304667bf89e59d08b17c
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 30 16:15:31 2007 -0600
- mpc83xx: don't hang if watchdog configured on 8360, 832x
- don't hang if watchdog configured on 8360, 832x
- The watchdog programming model is the same across all 83xx devices;
- make the code reflect that.
- commit b70047478570e371ce7223be342ce98afea0f7d6
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 30 16:15:21 2007 -0600
- mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
- protect memcpy to bad address if a local-mac-address is missing from dt
- commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 30 16:15:04 2007 -0600
- mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
- make 8360 default environment fdt be 8360 (not 8349)
- commit a28899c910024a0226331df07207b1038c300c93
- Author: Emilian Medve <Emilian.Medve@freescale.com>
- Date: Tue Jan 30 16:14:50 2007 -0600
- mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
- The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
- be used for busy-waiting since it strips the 'volatile' property from
- the bd variable. gcc3 was working by pure luck.
- This is a follow on patch to "Fix the UEC driver bug of QE"
- commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jan 30 14:08:30 2007 -0600
- mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
- The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
- MPC834X class processors. Change the protections from CONFIG_MPC8349 to
- CONFIG_MPC834X so they are more generic.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Jan 25 13:40:55 2007 -0600
- mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
- commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 24 17:18:37 2007 -0600
- mpc83xx: sort Makefile targets
- reordered targets alphabetically
- commit 91e25769771c1164ed63ffca0add49f934ae3343
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Tue Jan 16 11:38:14 2007 -0500
- mpc83xx: U-Boot support for Wind River SBC8349
- I've redone the SBC8349 support to match git-current, which
- incorporates all the MPC834x updates from Freescale since the 1.1.6
- release, including the DDR changes.
- I've kept all the SBC8349 files as parallel as possible to the
- MPC8349EMDS ones for ease of maintenance and to allow for easy
- inspection of what was changed to support this board. Hence the SBC8349
- U-Boot has FDT support and everything else that the MPC8349EMDS has.
- Fortunately the Freescale updates added support for boards using CS0,
- but I had to change spd_sdram.c to allow for board specific settings for
- the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
- default if the board doesn't specify a value.)
- Hopefully this should be mergeable as-is and require no whitespace
- cleanups or similar, but if something doesn't measure up then let me
- know and I'll fix it.
- Thanks,
- Paul.
- commit 05031db456ab227f3e3752f37b9b812b65bb83ad
- Author: Sam Song <samsongshu@yahoo.com.cn>
- Date: Thu Dec 14 19:03:21 2006 +0800
- mpc83xx: Remove a redundant semicolon in mpc8349itx.c
- A redundant semicolon existed in mpc8349itx.c
- should be removed.
- Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
- commit f35f358241c549be3f75cfe2eaa642914275b7ba
- Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
- Date: Wed Dec 6 21:23:55 2006 -0500
- mpc83xx: Put the version (and magic) after the HRCW.
- Put the version (and magic) after the HRCW. This puts it in a fixed
- location in flash, not at the start of flash but as close as we can get.
- Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
- commit 48aecd969171a6e99a55fae04933857787f9a5bd
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Dec 7 21:14:51 2006 +0800
- mpc83xx: Add the MPC832XEMDS board readme
- Add the MPC832XEMDS board readme
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 24c3aca3f1358b113d3215adb5433b156e99f72b
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Dec 7 21:13:15 2006 +0800
- mpc83xx: Add support for the MPC832XEMDS board
- This patch supports DUART, ETH3/4 and PCI etc.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit e080313c32322e15ab5a18eb896a252858c57284
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Dec 7 21:11:58 2006 +0800
- mpc83xx: streamline the 83xx immr head file
- For better format and style, I streamlined the 83xx head files,
- including immap_83xx.h and mpc83xx.h. In the old head files, 1)
- duplicated macro definition appear in the both files; 2) the structure
- of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
- macro definition put inside the each structure. So, I cleaned up the
- structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
- moved the macro definition to mpc83xx.h, Just like MPC8260.
- CHANGELOG
- *streamline the 83xx immr head file
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Dec 6 11:38:17 2006 +0800
- mpc83xx: Fix the UEC driver bug of QE
- The patch prevents the GCC tool chain from striping useful code for
- optimization. It will make UEC ethernet driver workable, Otherwise the
- UEC will fail in tx when you are using gcc4.x. but the driver can work
- when using gcc3.4.3.
- CHANGELOG
- *Prevent the GCC from striping code for optimization, Otherwise the UEC
- will tx failed when you are using gcc4.x.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 1 21:11:36 2007 +0100
- [PATCH] Update AMCC Katmai 440SPe eval board support
- This patch updates the recently added Katmai board support. The biggest
- change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
- driver.
- Please note, that still some problems are left with some memory
- configurations. See the driver for more details.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 1 07:03:25 2007 +0100
- [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ccbc7036648e465697ca298ba51e0e76dda352a0
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Feb 28 01:28:53 2007 +0100
- SC3: fix typo in default environment
- commit e344568b1b46af85ec32d815586f91bc115d6223
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue Feb 27 20:15:30 2007 +0300
- MCC200: Fixes for update procedure
- - fix logic error in image type handling
- - make sure file system images (cramfs etc.) get stored in flash
- with image header stripped so they can be mounted through MTD
- commit 743571145b37182757d4e688a77860b36ee77573
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Feb 27 14:26:04 2007 +0100
- Minor code cleanup.
- commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue Feb 27 12:40:16 2007 +0300
- MCC200 update - add LCD Progress Indicator
- commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Feb 22 07:43:34 2007 +0100
- [PATCH] get_dev() now unconditionally uses manual relocation
- Since the relocation fix is not included yet and we're not sure how
- it will be added, this patch removes code that required relocation
- to be fixed for now.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Feb 22 07:40:23 2007 +0100
- [PATCH] Change systemace driver to select 8 & 16bit mode
- As suggested by Grant Likely this patch enables the Xilinx SystemACE
- driver to select 8 or 16bit mode upon startup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Wed Feb 21 16:52:31 2007 +0100
- [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
- Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
- is fully finished. The sync() is defined in each CPU's io.h file. For
- those CPUs which do not need sync for now, a dummy sync() is defined in
- their io.h as well.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit da04995c7dc6772013a9a0dc5c767f190c402478
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Feb 21 13:44:34 2007 +0100
- [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 751bb57107d78978ae08e697c3deba816f5be091
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 13:21:57 2007 +0100
- [PATCH] Fix relocation problem with "new" get_dev() function
- This patch enables the "new" get_dev() function for block devices
- introduced by Grant Likely to be used on systems that still suffer
- from the relocation problems (manual relocation neede because of
- problems with linker script).
- Hopefully we can resolve this relocation issue soon for all platform
- so we don't need this additional code anymore.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d93e2212f962668b3dce091ff5edc33f2347fe37
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 13:17:42 2007 +0100
- [PATCH] Update SystemACE driver for 16bit access
- This patch removes some problems when the Xilinx SystemACE driver
- is used with 16bit access on an big endian platform (like the
- AMCC Katmai).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 13:15:40 2007 +0100
- [PATCH] Clean up Katmai (440SPe) linker script
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:57:08 2007 +0100
- [PATCH] Add support for the AMCC Katmai (440SPe) eval board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:51:26 2007 +0100
- [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
- This patch switches to the desired I2C bus when the date/dtt
- commands are called. This can be configured using the
- CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:43:34 2007 +0100
- [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
- This patch adds support for the DDR2 controller used on the
- 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
- board and works fine with the following DIMM modules:
- - Corsair CM2X512-5400C4 (512MByte per DIMM)
- - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
- - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
- This patch also adds the nice functionality to dynamically
- create the TLB entries for the SDRAM (tlb.c). So we should
- never run into such problems with wrong (too short) TLB
- initialization again on these platforms.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 36d830c9830379045f5daa9f542ac1c990c70068
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:35:42 2007 +0100
- [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
- Since the existing 4xx SPD SDRAM initialization routines for the
- 405 SDRAM controller and the 440 DDR controller don't have much in
- common this patch splits both drivers into different files.
- This is in preparation for the 440 DDR2 controller support (440SP/e).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:27:08 2007 +0100
- [PATCH] PPC4xx: Add support for multiple I2C busses
- This patch adds support for multiple I2C busses on the PPC4xx
- platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
- to make use of this feature.
- It also merges the 405 and 440 i2c header files into one common
- file 4xx_i2c.h.
- Also the 4xx i2c reset procedure is reworked since I experienced
- some problems with the first access on the 440SPe Katmai board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit eb867a76238fb38e952c37871b16d0d7fd61c95f
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:45 2007 +0100
- [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
- Block device read/write is anonymous data; there is no need to use a
- typed pointer. void * is fine. Also add a hook for block_read functions
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 53758fa20e935cc87eeb0519ed365df753a6f289
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:38 2007 +0100
- [PATCH 8_9] Add block_write hook to block_dev_desc_t
- Preparation for future patches which support block device writing
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f4852ebe6ca946a509667eb68be42026f837be76
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:31 2007 +0100
- [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
- Register read/write does not need to be wrapped in a full function. The
- patch replaces them with macros.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:23 2007 +0100
- [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
- The code in this file is not a command; it is a device driver. Put it in
- the correct place. There are zero functional changes in this patch, it
- only moves the file.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:16 2007 +0100
- [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
- This patch is in preparation of additional changes to the sysace driver.
- May as well take this opportunity to fixup the inconsistent whitespace since
- this file is about to undergo major changes anyway.
- There are zero functional changes in this patch. It only cleans up the
- the whitespace.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 80ba981d940471fe7e539e64fa3d2bd80002beda
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:07 2007 +0100
- [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
- isprint is already defined in ctype.c
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:00 2007 +0100
- [PATCH 3_9] Move buffer print code from md command to common function
- Printing a buffer is a darn useful thing. Move the buffer print code
- into print_buffer() in lib_generic/
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:04:52 2007 +0100
- [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
- Change the xilinx device drivers and board code to include config.h
- instead of xparameters.h directly. config.h always includes the
- correct xparameters file. This change reduces the posibility of
- including the wrong file when adding a new xilinx board port
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:04:34 2007 +0100
- [PATCH 1_4] Merge common get_dev() routines for block devices
- Each of the filesystem drivers duplicate the get_dev routine. This change
- merges them into a single function in part.c
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Feb 19 23:09:51 2007 +0100
- MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
- as root file system images.
- commit 489c696ae7211218961d159e43e722d74c36fcbc
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Wed Feb 14 14:30:28 2007 +0300
- MCC200: Extensions to Software Update Mechanism
- Update / extend Software Update Mechanism for MCC200 board:
- - Add support for rootfs image added. The environment variables
- "rootfs_st" and "rootfs_nd" can be used to override the default
- values of the image start and end.
- - Remove excessive key check code.
- - Code cleanup.
- commit 4be23a12f23f1372634edc3215137b09768b7949
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Feb 19 08:23:15 2007 +0100
- [PATCH] Update Sequoia EBC configuration (NOR FLASH)
- As spotted by Matthias Fuchs, the READY input should not be
- enabled for the NOR FLASH on the Sequoia board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2605e90bf676d48123afe5719a846d2b52b24aac
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Feb 16 07:57:42 2007 +0100
- [PATCH] Added support for the jupiter board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 497d012e5be0194e1084073d0081eb1a844796b2
- Author: Gary Jennejohn <garyj@pollux.denx.de>
- Date: Mon Feb 12 13:11:50 2007 +0100
- LPC2292: patch from Siemens.
- commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Feb 10 08:49:31 2007 +0100
- [PATCH] Add missing p3mx.h file to repository (ups)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Feb 9 10:45:42 2007 +0100
- [Motion-PRO] Preliminary support for the Motion-PRO board.
- commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Feb 7 16:51:08 2007 +0100
- [PATCH] Update some AMCC 4xx board config files (set initrd_high)
- Some boards that can have more than 768MBytes of SDRAM need to
- set "initrd_high", so that the initrd can be accessed by the
- Linux kernel.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7372ca68227930d03cffa548310524cad5b96733
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Feb 2 12:44:22 2007 +0100
- [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
- Previously the strapping DCR/SDR was read to determine if the internal PCI
- arbiter is enabled or not. This strapping bit can be overridden, so now
- the current status is read from the correct DCR/SDR register.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2aa54f651a42d198673318f07a20c89a43e4d197
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Feb 2 12:42:08 2007 +0100
- [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Feb 1 13:22:41 2007 +0100
- [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
- When PCI PNP is enabled the pci pnp configuration routine is called
- which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
- problems with some PCI cards. For now disable the PCI PNP configuration.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2902fadade3be7659467e8d074048c6b7068f5c0
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 31 16:56:10 2007 +0100
- [PATCH] Update 440EPx/440GRx cpu detection
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d5ea287b02a6945c3977410e364a879dd1a555c8
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 31 16:38:04 2007 +0100
- [PATCH] Update esd cpci5200 files
- Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 31 16:37:34 2007 +0100
- [PATCH] Add support for esd mecp5200 board
- Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 31 12:38:50 2007 +0100
- [PATCH] Remove unneccessary yellowstone board config file
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e802594b6fa1b166308820c276b96dc0d7cc731c
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 30 17:06:10 2007 +0100
- [PATCH] Update Sequoia (440EPx) config file
- The config file now handles the 2nd target, the Rainier (440GRx)
- evaluation board better. Additionally the PPC input clock was
- adjusted to match the correct value of 33.0 MHz.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 700200c67e73b83751418abe7815840dca8fd6cb
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 30 17:04:19 2007 +0100
- [PATCH] Merge Yosemite & Yellowstone board ports
- Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
- share one config file and all board specific files. This way we
- don't have to maintain two different sets of files for nearly
- identical boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 30 15:01:49 2007 +0100
- [PATCH] Update Prodrive SCPU (PDNB3 variant) board
- SCPU doesn't use redundant environment in flash.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 30 12:51:07 2007 +0100
- [PATCH] alpr: Update alpr board config file
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f8db84f132b1e335f20f96138a1f09ed97b08664
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Jan 30 00:50:40 2007 +0100
- LPC2292 SODIMM port coding style cleanup.
- commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
- Author: Gary Jennejohn <garyj@pollux.denx.de>
- Date: Wed Jan 24 12:16:56 2007 +0100
- Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
- commit 2daf046ba627f85f44195815778140039636244e
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Jan 23 17:22:06 2007 +0100
- [iDMR] Add MTD and JFFS2 support, also add default partition definition.
- commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Jan 23 14:21:14 2007 +0100
- [iDMR] Flash driver on initialisation write-protects some sectors,
- currently sectors 0-3. Sector 3 does not need to be protected, though
- (U-boot occupies sectors 0-1 and the environment sector 2). This commit
- fixes this, i.e., only sectors 0-2 are protected.
- commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Jan 23 14:11:22 2007 +0100
- [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
- "mii device" results in "Unexpected exception"). Fixing this properly
- requires some clean-up in the FEC drivers infrastructure for ColdFire, so
- this commit disables MII commads for now.
- commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Jan 23 13:25:22 2007 +0100
- [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
- Identification Register (CIR).
- commit fdef388758506765d4d6a7155c8f1584c63ff581
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Jan 22 13:19:21 2007 +0800
- use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
- The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
- fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
- mpc7448hpc2 board.
- commit a4012396645533aef218354eeba754dff0deace8
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Fri Jan 19 23:08:39 2007 +0100
- Minor code cleanup.
- commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jan 19 19:57:10 2007 +0100
- [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jan 19 18:05:26 2007 +0100
- [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
- if you must swap the bytes between reading/writing.
- (Needed for the SC3 board)
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 18 16:05:47 2007 +0100
- [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 18 11:54:52 2007 +0100
- [PATCH] Update Prodrive P3Mx support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 34167a36c29ee946b727465db5c014746a08e978
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 18 11:48:10 2007 +0100
- [PATCH] Add missing Taishan config file
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Thu Jan 18 11:28:51 2007 +0100
- [PATCH] Fix: Compilerwarnings for SC3 board.
- The EBC Configuration Register is now by CFG_EBC_CFG definable
- Added JFFS2 support for the SC3 board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 18 10:25:34 2007 +0100
- [PATCH] Add support for AMCC Taishan PPC440GX eval board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Jan 16 18:30:50 2007 +0100
- Raname solidcard3 into sc3; add redundant env for sc3
- commit 1bbbbdd20fcec9933697000dcf55ff7972622596
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Jan 16 12:46:35 2007 +0100
- Update default environment for Solidcard3
- commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jan 15 09:46:29 2007 +0100
- [PATCH] Fix 440SPe rev B detection from previous patch
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a443d31410c571ee8f970da819a44d698fdd6b1f
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Sun Jan 14 13:35:31 2007 +0100
- [FIX] correct I2C Writes for the LM81 Sensor.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 0bba5452835f19a61204edcda3a58112fd8e2208
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Jan 13 11:17:10 2007 +0100
- Undo commit 3033ebb2: reset command does not take any arguments
- Haiying Wang's modification to the reset command was broken, undo it.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 95981778cff0038fd9941044d6a3eda810e33258
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 13 08:01:03 2007 +0100
- [PATCH] Update 440SP(e) cpu revisions
- Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 13 07:59:56 2007 +0100
- [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
- Now the board revision and the current PCI bus speed are printed after
- the board message.
- Also the EBC initialising is now done via defines in the board config
- file.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 36adff362c2c0141ff8a810d42a7e478f779130f
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 13 07:59:19 2007 +0100
- [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
- Now the board revision and the current PCI bus speed are printed after
- the board message.
- Also the EBC initialising is now done via defines in the board config
- file.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 13 07:57:51 2007 +0100
- [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
- Now the board revision and the current PCI bus speed are printed after
- the board message.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ca43ba18e910206ef8063e4b22d282630bff3fd2
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Thu Jan 11 15:44:44 2007 +0100
- Added support for the SOLIDCARD III board from Eurodesign
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
- Author: Reinhard Thies <Reinhard.Thies@web.de>
- Date: Wed Jan 10 14:41:14 2007 +0100
- Adjusted default environment for cam5200 board.
- commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Jan 10 15:35:52 2007 +0100
- Update CHANGELOG
- commit 787fa15860a57833e50bd30555079a9cd4e519b8
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Jan 10 01:28:39 2007 +0100
- Fix auto_update for MCC200 board.
- The invocation of do_auto_update() is moved to the end of the
- misc_init_r() function, after the flash mappings have been
- initialized. Please find attached a patch that implements that
- change.
- Also correct the decoding of the keypad status. With this update, the
- key that will trigger the update is Column 2, Row 2.
- commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Jan 10 00:26:15 2007 +0100
- CAM5200 flash driver modifications:
- - use CFI driver (replaces custom flash driver) for main 'cam5200' target
- - add second build target 'cam5200_niosflash' which still uses custom driver
- commit 67fea022fa957f59653b5238c7496f80a6b70432
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 16:02:48 2007 +0100
- SPC1920: cleanup memory contoller setup
- commit 8fc2102faa23593c80381437c09f7745a14deb40
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 14:57:14 2007 +0100
- Fix the cpu speed setup to work with all boards.
- commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 14:57:13 2007 +0100
- SPC1920: add support for the FM18L08 Ramtron FRAM
- commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 14:57:13 2007 +0100
- SPC1920: update the HPI register addresses to work with the second
- generation of hardware
- commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:13 2007 +0100
- Miscellanious spc1920 related cleanups
- commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 14:57:12 2007 +0100
- SPC1920 GO/NOGO led should be set to color red in U-Boot
- commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:12 2007 +0100
- Add support for the DS3231 RTC
- commit 8139567b60d678584b05f0718a681f2047c5e14f
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:11 2007 +0100
- SMC1 uses external CLK4 instead of BRG on spc1920
- commit d8d9de1a02fbd880b613d607143d1f57342affc7
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:10 2007 +0100
- Update the SPC1920 CMB PLD driver
- commit 3f34f869162750e5e999fd140f884f5de952bcfe
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:10 2007 +0100
- Add / enable I2C support on the spc1920 board
- commit d28707dbce1e9ac2017ad051da4133bf22b4204f
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:10 2007 +0100
- Add support for the tms320671x host port interface (HPI)
- commit f4eb54529bb3664c3a562e488b460fe075f79d67
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Jan 7 00:13:11 2007 +0100
- Prepare for release 1.2.0
- commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 6 15:58:09 2007 +0100
- [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
- This patch fixes a problem with an incorrect setup for the refresh
- timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f16c1da9577f06c5fc08651a4065537407de4635
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 6 15:56:13 2007 +0100
- [PATCH] Update ALPR board files
- This update brings the ALPR board support to the newest version.
- It also fixes a problem with the NAND driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cd1d937f90250a32988c37b2b4af8364d25de8ed
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 5 11:46:05 2007 +0100
- [PATCH] nand: Fix problem with oobsize calculation
- Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
- The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
- returns a 0x15. In the code fragment below bits [1:0] determine the
- page size, it is ANDed via "(extid & 0x3)" then shifted out. The
- next field is also ANDed with 0x3. However this is a one bit field
- as defined in the Hynix and Samsung parts in the 4th ID byte that
- determins the oobsize, not a two bit field. It works on Samsung as
- bits[3:2] are 01. However for the Hynix there is a 11 in these two
- bits, so the oob size gets messed up.
- I checked the correct linux code and the suggested fix from Brian is
- also available in the linux nand mtd driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 5 10:40:36 2007 +0100
- [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
- This fix will make the MAL burst disabling patch for the Linux
- EMAC driver obsolete.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 023889838282b6237b401664f22dd22dfba2c066
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 5 10:38:05 2007 +0100
- [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
- This code will optimize the DDR2 controller setup on a board specific
- basis.
- Note: This code doesn't work right now on the NAND booting image for the
- Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cce4acbb68398634b8d011ed7bb0d12269c84230
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Dec 28 19:08:21 2006 +0100
- Few V38B changes:
- - fix a typo in V38B config file
- - move watchdog initialisation earlier in the boot process
- - add "wdt=off" to default kernel command line (disables kernel watchdog)
- commit 92eb729bad876725aeea908d2addba0800620840
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Dec 27 01:26:13 2006 +0100
- Fix bug in adaption of Stefano Babic's CFI driver patch.
- commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Dec 24 01:42:57 2006 +0100
- Minor code cleanup.
- commit d784fdb05900ada3686d5778783e1fb328e9fb66
- Author: Stefano Babic <sbabic@denx.de>
- Date: Tue Dec 12 00:22:42 2006 +0100
- Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
- commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 22 14:29:40 2006 +0100
- [PATCH] Fix sequoia flash autodetection (finally correct)
- Now 32MByte and 64MByte FLASH is know to work and other
- configurations should work too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 82e5236a8b719543643fd26d5827938ab2b94818
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Fri Dec 22 10:30:26 2006 +0100
- Minor code cleanup; update CHANGELOG.
- commit fa23044564091f05d9695beb7b5b9a931e7f41a4
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Thu Dec 21 17:17:02 2006 +0100
- Added support for the TQM8272 board from TQ
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Thu Dec 21 16:14:48 2006 +0100
- [PATCH] Add support for the UC101 board from MAN.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit c84bad0ef60e7055ab0bd49b93069509cecc382a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Dec 20 00:29:43 2006 +0100
- Fix to make the baudrate changes immediate for the MCF52x2 family.
- commit daa6e418bcc0c717752e8de939c213c790286096
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Dec 20 00:27:32 2006 +0100
- Preliminary support for the iDMR board (ColdFire).
- commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
- Author: Andrei Safronov <safronov@pollux.denx.de>
- Date: Fri Dec 8 16:23:08 2006 +0100
- automatic update mechanism
- commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Dec 4 17:56:59 2006 +0800
- Slight code clean up.
- Add comments, delete duplicate define and remove spaces.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Dec 4 17:54:21 2006 +0800
- Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
- multiplier table can not refect the real PLL clock behavior of these
- processors. Please refer to the hardware specification for detailed
- information of the corresponding processors.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Dec 4 14:46:23 2006 +0800
- Remove the static MAC address, ip address, server ip, netmask and
- gateway ip for network setting.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Dec 4 14:33:08 2006 +0800
- Remove the duplicate memory test code for mpc744ihpc2 board.
- If a memory test is needed, please use the functions in
- post/memory.c or memtest command.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Fri Dec 1 19:01:25 2006 +0800
- Fix the exception occuring in RAM table search issue.
- The original search_one_table() function code can only processes the search
- for the exception occurring in FLASH/ROM, because the exception and fixup
- table usually locate in FLASH. If the exception address is also in
- FLASH, it will be OK.
- If the exception occurs in RAM, after the u-boot relocation, a
- relocation offset should be added.
- clean up the code in cpu/74xx_7xx/cpu.c
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit ee311214e0d216f904feea269599d0934bf71f23
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Fri Dec 1 11:47:36 2006 +0800
- Clean up the code according to codestyle:
- (1) remove some C++ comments.
- (2) remove trailing white space.
- (3) remove trailing empty line.
- (4) Indentation by table.
- (5) remove {} in one line condition.
- (6) add space before '(' in function call.
- Remove some weird printf () output.
- Add necessary comments.
- Modified Makefile to support building in a separate directory.
- commit dd520bf314c7add4183c5191692180f576f96b60
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Nov 30 18:02:20 2006 +0100
- Code cleanup.
- commit 8d9a8610b8256331132227e9e6585c6bd5742787
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Nov 30 01:54:07 2006 +0100
- Code cleanup. Update CHANGELOG.
- commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Wed Nov 29 16:23:42 2006 +0100
- [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
- The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
- not the XLB frequency.
- This patch depends on the previous patches for MPC52xx device tree support
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
- commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Nov 29 15:42:37 2006 +0100
- [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
- This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
- and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
- quite similar and share the same board directory "prodrive/p3mx"
- and the same config file "p3mx.h".
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Nov 29 12:53:15 2006 +0100
- [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
- In the bootvx command the load address was only read from the env
- variable "loadaddr" and not optionally passed as paramter as described
- in the help. This is fixed with this patch. The behaviour is now the
- same as in the bootelf command.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Nov 29 12:03:57 2006 +0100
- [PATCH] include/ppc440.h minor error affecting interrupts
- Fixed include/ppc440.c for UIC address Bug
- Corrects bug affecting the addresses for the universal interrupt
- controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
- Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Tue Nov 28 16:17:27 2006 -0600
- Make fsl-i2c not conflict with SOFT I2C
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 14198bf768fdc958e3c1afd2404e5262208e98d7
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Tue Nov 28 16:17:18 2006 -0600
- Fix I2C master address initialization.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Nov 28 23:31:19 2006 -0600
- Assign maintainers for mpc8349emds and mpc8360emds
- Dave for mpc8360emds, and me for mpc8349emds.
- commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Nov 28 23:28:33 2006 -0600
- Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
- give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
- since they are passed by reference to ucc_get_cmxucr_reg and assigned.
- commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Nov 28 12:09:35 2006 -0600
- mpc83xx: Miscellaneous code style fixes
- Implement various code style fixes and similar changes.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 28 17:55:49 2006 +0100
- [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
- This patch adds the code and configuration necessary to boot with an
- arch/powerpc Linux kernel.
- Signed-off-by: Grant Likely <grant.likely@gmail.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit e732faec95a83cb468b4850ae807c8301dde8f6a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 28 16:09:24 2006 +0100
- [PATCH] PPC4xx: 440SP Rev. C detection added
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 28 11:04:45 2006 +0100
- [PATCH] nand: Fix patch merge problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 28 11:04:45 2006 +0100
- [PATCH] nand: Fix patch merge problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Nov 27 22:53:53 2006 +0100
- Update CHANGELOG
- commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 17:43:25 2006 +0100
- [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
- Patch below corrects the setting of the zmiifer register, it was
- overwritting the register rather than ORing the settings.
- Signed-off-by: Neil Wilson <NWilson@airspan.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d1a72545296800b7e219f93104ad5836f0003d66
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 17:34:10 2006 +0100
- [PATCH] Select NAND embedded environment from board configuration
- The current NAND Bootloader setup forces the environment
- variables to be in line with the bootloader. This change
- enables the configuration to be made in the board include
- file instead so that it can be individually enabled.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 15784862857c3c2214498defcfed84ff137fb81e
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 17:22:19 2006 +0100
- [PATCH] nand_wait() timeout fixes
- Two fixes for the nand_wait() function in
- drivers/nand/nand_base.c:
- 1. Use correct timeouts. The original timeouts in Linux
- source are 400ms and 20ms not 40s and 20s
- 2. Return correct error value in case of timeout. 0 is
- interpreted as OK.
- Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit da5553b095bf04f4f109ad7e565dae3aba47b230
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 17:04:06 2006 +0100
- [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
- This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
- arguments to bootm. It removes the getenv("disable_of") test that used
- to be used for this purpose.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit a9398e018593782c5fa7d0741955fc1256b34c1e
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Nov 27 15:32:42 2006 +0100
- Minor code cleanup. Update CHANGELOG.
- commit 1729b92cde575476684bffe819d0b7791b57bff2
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:52:04 2006 +0100
- [PATCH] 4xx: Fix problem with board specific reset code (now for real)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:49:51 2006 +0100
- [PATCH] alpr: remove unused board specific flash driver
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:48:41 2006 +0100
- [PATCH] 4xx: Fix problem with board specific reset code
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ec0c2ec725aec9524a177a77ce75559e644a931a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:46:06 2006 +0100
- [PATCH] Remove testing 4xx enet PHY setup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:12:17 2006 +0100
- [PATCH] Update Prodrive ALPR board support (440GX)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 58b485776698c3d71ec5a215e392123b4c15afa3
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Nov 27 11:51:21 2006 +0100
- Add a small README with information on the generic ohci driver.
- commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Nov 27 11:46:46 2006 +0100
- Fix some endianness issues related to the generic ohci driver
- commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Nov 27 11:44:58 2006 +0100
- Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
- to choose between the old and the generic OHCI drivers.
- commit 53e336e9ffc51035bdc4e5867631b3378761b4df
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Nov 27 11:43:09 2006 +0100
- Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
- and adapted board configs TQM5200 and yosemite accordingly. This commit
- also makes the maximum number of root hub ports configurable
- (CFG_USB_OHCI_MAX_ROOT_PORTS).
- commit 78d620ebb5871d252270dedfad60c6568993b780
- Author: Wolfgang Denk <wd@atlas.denx.de>
- Date: Thu Nov 23 22:58:58 2006 +0100
- Updates for TQM5200 modules:
- - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
- - simplify "udate" definitions
- commit 2053283304eeddf250d109e6791eb6fa4cad14f7
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Nov 22 13:20:50 2006 +0100
- [PATCH] PPC4xx start.S: Fix for processor errata
- Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
- errata 1.12: 440_33 by moving patch up in code.
- Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4ef6251403f637841000e0fef9e832aa01339822
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 20 20:39:52 2006 +0100
- [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Nov 20 10:28:30 2006 +0100
- Update CHANGELOG
- commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 13 13:55:24 2006 +0100
- [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
- * Adds support for AMD command set Top Boot flash geometry reversal
- * Adds support for reading JEDEC Manufacturer ID and Device ID
- * Adds support for displaying command set, manufacturer id and
- device ids (flinfo)
- * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
- * Removes outdated change history (refer to git log instead)
- Signed-off-by: Tolunay Orkun <listmember@orkun.us>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b21b511d4c50408f4853f46f06b601272196223f
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Nov 12 21:13:23 2006 +0100
- Update CHANGELOG
- commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sat Nov 11 22:48:22 2006 +0100
- Disable the watchdog in the default config for the V38B board.
- commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sat Nov 11 22:43:00 2006 +0100
- Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
- group is enabled for USB earlier (in cpu_init_f() instead of
- usb_lowlevel_init()).
- commit 91650b3e4de688038d4f71279c44858e3e2c6870
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Nov 6 17:06:36 2006 +0100
- Sequential accesses to non-existent memory must be synchronized,
- at least on G2 cores.
- This fixes get_ram_size() problems on MPC5200 Rev. B boards.
- commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Nov 3 19:15:00 2006 -0600
- mpc83xx: Update 83xx to use fsl_i2c.c
- Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
- cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
- Added multiple I2C bus support to fsl_i2c.c.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit d239d74b1c937984bc519083a8e7de373a390f06
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Nov 3 12:00:28 2006 -0600
- mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
- Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
- tree matches the other 8xxx trees.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit f7fb2e703ec9688541416962724adff70a7322cb
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Nov 2 19:47:11 2006 -0600
- mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
- commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
- Author: Dave Liu <daveliu@freescale.com>
- Date: Thu Nov 2 18:05:50 2006 -0600
- mpc83xx: Fix the incorrect dcbz operation
- The 834x rev1.x silicon has one CPU5 errata.
- The issue is when the data cache locked with
- HID0[DLOCK], the dcbz instruction looks like no-op inst.
- The right behavior of the data cache is when the data cache
- Locked with HID0[DLOCK], the dcbz instruction allocates
- new tags in cache.
- The 834x rev3.0 and later and 8360 have not this bug inside.
- So, when 834x rev3.0/8360 are working with ECC, the dcbz
- instruction will corrupt the stack in cache, the processor will
- checkstop reset.
- However, the 834x rev1.x can work with ECC with these code,
- because the sillicon has this cache bug. The dcbz will not
- corrupt the stack in cache.
- Really, it is the fault code running on fault sillicon.
- This patch fix the incorrect dcbz operation. Instead of
- CPU FP writing to initialise the ECC.
- CHANGELOG:
- * Fix the incorrect dcbz operation instead of CPU FP
- writing to initialise the ECC memory. Otherwise, it
- will corrupt the stack in cache, The processor will checkstop
- reset.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Nov 1 00:10:40 2006 -0600
- mpc83xx: add OF_FLAT_TREE bits to 83xx boards
- add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
- STDOUT_PATH configuration bits to mpc8349emds,
- mpc8349itx, and mpc8360emds board code.
- redo environment to use bootm with the fdtaddr
- for booting ARCH=powerpc kernels by default,
- and provide default fdtaddr values.
- commit 48041365b3420589ad464ebc7752e0053538b729
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Nov 1 00:07:25 2006 -0600
- mpc83xx: change ft code to modify local-mac-address property
- Update 83xx OF code to update local-mac-address properties
- for ethernet instead of the obsolete 'address' property.
- commit 9ca880a250870a7d55754291b5591d2b5fe89b54
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Oct 31 21:23:16 2006 -0600
- mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
- This patch also adds an improved I2C set_speed(), which handles all clock
- frequencies.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit ac4b5622ce050b5ee1e154b98df630d778661632
- Author: Dave Liu <daveliu@freescale.com>
- Date: Tue Oct 31 19:54:59 2006 -0600
- mpc83xx: add the README.mpc8360emds
- add doc/README.mpc8360emds to accompany the new board support
- commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
- Author: Dave Liu <daveliu@freescale.com>
- Date: Fri Nov 3 12:11:15 2006 -0600
- mpc83xx: add QE ethernet support
- this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
- commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
- Author: Dave Liu <daveliu@freescale.com>
- Date: Fri Nov 3 19:33:44 2006 -0600
- mpc83xx: Add MPC8360EMDS basic board support
- Add support for the Freescale MPC8360EMDS board.
- Includes DDR, DUART, Local Bus, PCI.
- commit 23892e49352de74f7fac36ff90bb1be143d195e3
- Author: Dave Liu <daveliu@freescale.com>
- Date: Tue Oct 31 19:30:40 2006 -0600
- mpc83xx: add the QUICC Engine (QE) immap file
- common QE immap file. Also required for 8360.
- commit b701652a4992bdcc62fb1a6038a85beef9e55da4
- Author: Dave Liu <daveliu@freescale.com>
- Date: Tue Oct 31 19:25:38 2006 -0600
- mpc83xx: Add 8360 specifics to 83xx immap
- Mainly add QE device dependencies, with appropriate 8360 protection.
- Lindent also run.
- commit 988833324a7fda482c8ac3ca23eb539f8232e404
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Oct 31 19:14:41 2006 -0600
- mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
- PREREQUISITE PATCHES:
- * This patch can only be applied after the following patches have been applied:
- 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
- 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
- CHANGELOG:
- * For the 8349E-mITX, fix some size values in pci_init_board(), enable
- the clock for the 2nd USB board (Linux kernel will hang otherwise),
- and fix the CONFIG_BOOTARGS macro.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Oct 31 18:44:42 2006 -0600
- mpc83xx: Add support for the MPC8349E-mITX
- PREREQUISITE PATCHES:
- * This patch can only be applied after the following patches have been applied:
- 1) DNX#2006090742000024 "Add support for multiple I2C buses"
- 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
- 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
- 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
- 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
- CHANGELOG:
- * Add support for the Freescale MPC8349E-mITX reference design platform.
- The second TSEC (Vitesse 7385 switch) is not supported at this time.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 183da6d9b446cc12123455844ad1187e2375626f
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Tue Sep 12 10:15:53 2006 -0400
- Additional MPC8349 support for multibus i2c
- Hello,
- Here is a patch for a file that was accidentally left out of a previous
- attempt.
- It accompanies the patch with ticket DNX#2006090742000024
- CHANGELOG:
- Change PCI initialization to use new multi-bus I2C API.
- regards,
- Ben
- commit b24f119d672b709d153ff2ac091d4aa63ec6877d
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Thu Sep 7 16:51:04 2006 -0400
- Multi-bus I2C implementation of MPC834x
- Hello,
- Attached is a patch implementing multiple I2C buses on the MPC834x CPU
- family and the MPC8349EMDS board in particular.
- This patch requires Patch 1 (Add support for multiple I2C buses).
- Testing was performed on a 533MHz board.
- /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- CHANGELOG:
- Implemented driver-level code to support two I2C buses on the
- MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
- are 50kHz, 100kHz and 400kHz on each bus.
- regards,
- Ben
- commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Thu Sep 7 16:50:54 2006 -0400
- Add support for multiple I2C buses
- Hello,
- Attached is a patch providing support for multiple I2C buses at the
- command level. The second part of the patch includes an implementation
- for the MPC834x CPU and MPC8349EMDS board.
- /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- Overview:
- 1. Include new 'i2c' command (based on USB implementation) using
- CONFIG_I2C_CMD_TREE.
- 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
- the commands to change bus number and speed are only available under the
- new 'i2c' command mentioned in the first bullet.
- 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
- systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
- of an array of bus-device pairs. Otherwise, it is an array of uchar.
- CHANGELOG:
- Added new 'i2c' master command for all I2C interaction. This is
- conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
- setting I2C bus speed as well as changing the active bus if the board
- has more than one (conditionally compiled with
- CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
- Updated README.
- regards,
- Ben
- commit bed85caf872714ebf53013967a695c9d63acfc68
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Oct 31 18:13:36 2006 -0600
- mpc83xx: Add support for Errata DDR6 on MPC 834x systems
- CHANGELOG:
- * Errata DDR6, which affects all current MPC 834x processors, lists changes
- required to maintain compatibility with various types of DDR memory. This
- patch implements those changes.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit afd6e470f639883002c7c59d562690a5cb0f4865
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Oct 25 18:45:23 2006 -0500
- mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
- commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Aug 22 17:07:00 2006 -0500
- mpc83xx: Add support for variable flash memory sizes on 83xx systems
- CHANGELOG:
- * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
- window registers, instead of using a hard-coded value of 8MB.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
- Author: Tanya Jiang <tanya.jiang@freescale.com>
- Date: Thu Aug 3 18:38:13 2006 +0800
- mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
- Unified TQM834x variable names with 83xx and consolidated macro
- in preparation for the 8360 and other upcoming 83xx devices.
- Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
- commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
- Author: Dave Liu <daveliu@freescale.com>
- Date: Wed Oct 25 14:41:21 2006 -0500
- mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
- Incorporated the common unified variable names and the changes in preparation
- for releasing mpc8360 patches.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 3894c46c27c64891f93ac04edde86a9fa9758d92
- Author: Tanya Jiang <tanya.jiang@freescale.com>
- Date: Thu Aug 3 18:36:02 2006 +0800
- mpc83xx: Fix missing build for mpc8349emds pci.c
- Make pci build for mpc8349emds
- Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
- commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
- Author: Tanya Jiang <tanya.jiang@freescale.com>
- Date: Thu Aug 3 18:39:49 2006 +0800
- mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
- Removed unused file resetvec.S for mpc83xx cpu
- Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
- commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
- Author: Nick Spence <Nick.Spence@freescale.com>
- Date: Sat Sep 30 00:32:59 2006 -0700
- NAND Flash verify across block boundaries
- This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
- defined
- and the write crosses a block boundary. The pointer to the verification
- buffer (bufstart) is not being updated to reflect the starting of the
- new
- block so the verification of the second block fails.
- CHANGELOG:
- * Fix NAND FLASH page verification across block boundaries
- commit f484dc791a3932537213c43c654cc1295c64b84c
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Sep 7 07:39:46 2006 -0700
- Added RGMII support to the TSECs and Marvell 881111 Phy
- Added a phy initialization to adjust the RGMII RX and TX timing
- Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Fri Nov 3 13:10:00 2006 +0800
- Remove some unused CFG define.
- undef CFG_DRAM_TEST
- commit 99c09c4dec34f77c243bf51bea532e3f339410ad
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Fri Nov 3 13:07:36 2006 +0800
- Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
- Both work. 0xFF000000 seems more reasonable.
- commit c59200443072353044aa4bf737a5a60f9a9af231
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Nov 2 15:15:01 2006 +0100
- Release U-Boot 1.1.6
- commit c1fbe4103a0d6c8957f912af902d705ba67836f2
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:14:48 2006 +0800
- This patch comes from Yuli's posted patch on 8/8/2006
- titled "CFI Driver Little-Endian write Issue".
- http://sourceforge.net/mailarchive/message.php?msg_id=36311999
- If that patch applied, please discard this one.
- Until now , I do not see his patch is applied. So please apply this one.
- Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit b825f158e449e1e9cf74c08e572955e122394c96
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:12:31 2006 +0800
- Tsi108 on chip i2c support.
- The i2c Interface provides a master-only, serial interface that can be
- used for initializing Tsi108/Tsi109 registers from an EEPROM after a
- device reset.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:11:06 2006 +0800
- Tsi108 on chip pci controller support.
- If there is no pci card, the tsi108/109 pci configure read will
- cause a machine check exception to the processor. PCI error should
- also be cleared after the read.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit d1927cee977126e547ceeba23e4f978f377cfb8f
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:08:55 2006 +0800
- Tundra tsi108 on chip Ethernet controller support.
- The following is a brief description of the Ethernet controller:
- The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
- Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
- to manage the two physical connection devices (PHYs). Each Ethernet port
- has its own statistics monitor that tracks and reports key interface
- statistics. Each port supports a 256-entry hash table for address
- filtering. In addition, each port is bridged to the Switch Fabric
- through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
- Each Ethernet port also has a pair of internal Ethernet DMA channels to
- support the transmit and receive data flows. The Ethernet DMA channels
- use descriptors set up in memory, the memory map of the device, and
- access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
- handles arbitration for the Switch Fabric. The Controller also
- has a register businterface for register accesses and status monitor
- control.
- The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
- modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
- The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
- data flows to and from the Ethernet Controller through the Switch Fabric.
- Each Ethernet port uses its transmit and receive DMA channels to manage
- data flows through buffer descriptors that are predefined by the
- system (the descriptors can exist anywhere in the system memory map).
- These descriptors are data structures that point to buffers filled
- with data ready to transmit over Ethernet, or they point to empty
- buffers ready to receive data from Ethernet.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:01:33 2006 +0800
- Tundra tsi108 header file.
- The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
- PowerPC processors that offers numerous system interconnect options for
- embedded application designers. The Tsi108 can interconnect 60x or
- MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
- and Flash. Provided the macro define for tsi108 chip.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 87c4db09699c6b89176b31004afcb83eb1585d47
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:59:15 2006 +0800
- Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
- mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 27801b8ab11c61b577e45742a515bb3b23b80241
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:57:21 2006 +0800
- Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
- Make ,config.mk and link file for the mpc7448hpc2 board.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:55:04 2006 +0800
- Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
- The mpc7448hpc2 board support header file.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 625bb5ddb50b243f931262ca8c46956409471917
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:52:21 2006 +0800
- Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
- The mpc7448hpc2 board support low level assemble language init code.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 4c52783b3d024e153c4972b97332e314bc3bdc46
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:49:51 2006 +0800
- General code modification for mpc7448hpc2 board support.
- 1. Add 7447A and 7448 processor support.
- 2. Add the following flags.
- CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
- (such as by switch on board), this flag should be set.
- CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
- relocates to RAM, this flag should be set.
- CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
- system hang in exception, this flag should be set.
- There is a design issue for tsi108/109 pci configure read. When pci scan
- the slots, if there is no pci card, the tsi108/9 will cause a machine
- check exception for mpc7448 processor.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:34:47 2006 +0800
- Add README file for mpc7448hpc2 board.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Nov 1 02:04:38 2006 +0100
- Finish up support for MarelV38B board
- - add watchdog support
- - enable GPIO_WKUP_7 pin for input
- - code cleanup
- commit ffa150bc90c943ca265170bd1be3f293674dd5c7
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Nov 1 01:45:46 2006 +0100
- - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
- * remove warnings when compiling ethaddr.c
- * adjust linker script (fixes a crash resulting from incorrect
- definition of __u_boot_cmd_start)
- - Some MarelV38B code cleanup.
- commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Nov 1 01:38:16 2006 +0100
- - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
- MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
- Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
- MPC5XXX_WU_GPIO_DATA_O for affected boards.
- - Add defintions for some MPC5XXX GPIO pins.
- commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Nov 1 01:34:29 2006 +0100
- Changed MarelV38B board make target to lowercase. Config file cleanup.
- commit 1954be6e9c9421b45d0a9d05b10356acc7563150
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Oct 29 01:03:51 2006 +0200
- Automatically adjust ARFLAGS so "make -s" is really silent.
- commit fae684e89844856383bdf101440889557df3e6b1
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 28 16:45:00 2006 +0200
- [PATCH] omap925.c: Remove unused functions
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 28 17:12:58 2006 +0200
- [PATCH] Add some missing machtypes for netstar & voiceblue boards
- Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
- numbers in code.
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 856f054410cef52d868feb330168b2a4c4091328
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 28 15:55:52 2006 +0200
- [PATCH] NAND: Partition name support added to NAND subsystem
- chpart, nboot and NAND subsystem related commands now accept also partition
- name to specify offset.
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Oct 28 02:29:44 2006 +0200
- Update CHANGELOG.
- commit 2751a95abd1b96911081c357e96a12fa97b40dee
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Oct 28 02:29:14 2006 +0200
- Enable commandline editing and hush shell on all TQM boards.
- commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Oct 28 02:28:02 2006 +0200
- README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
- commit 471a7be7a042e95e440f5de969c9765214ae8d6e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Oct 28 01:14:32 2006 +0200
- Check for illegal character '=' in environment variable names.
- Make sure the string passed as variable name does not contain a '='
- character. This not only prevents the common error or typing
- "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
- also closes a backdoor which allowed to delete write-protected
- environment variables, for example by using "setenv ethaddr=".
- commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Oct 28 00:38:39 2006 +0200
- Minor code cleanup.
- commit e11887a77d81077416a2d1c5e0354916fee8c034
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Oct 26 17:55:31 2006 +0200
- Don't pass any debug options directly to the assembler
- When passing the -g option to gcc, gcc automatically selects a
- suitable --g<format> option to pass on to the assembler.
- Thus, there's no point in forcing a specific debug option on the
- assembler using the -Wa mechanism.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 27 07:47:22 2006 -0500
- MPC86xx: Cleaned up unused and conditionally used local variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Fri Oct 27 11:55:21 2006 +0200
- Fix "ar" flags in some Makefiles to allow for silent "make -s"
- commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Thu Oct 26 14:38:25 2006 -0400
- Fix TSEC driver (now for real): avoid crashes if PHY is not attached
- to a TSEC (e.g. a switch is connected via RMII) or
- if the PHY is defective/incorrectly configured.
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Thu Oct 26 14:38:25 2006 -0400
- Fix TSEC driver: avoid crashes if PHY is not attached
- to a TSEC (e.g. a switch is connected via RMII) or
- if the PHY is defective/incorrectly configured.
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Oct 26 16:24:31 2006 +0200
- Code cleanup.
- commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Oct 25 15:48:59 2006 +0200
- Finish up support for the ATSTK1000/ATSTK1002 boards
- Add atstk1002_config target to Makefile and move the AVR32 section
- down below Blackfin so that it doesn't end up in the middle of
- MIPS.
- Drop the autogenerated linker script thing for now. Will have to
- revisit how to handle chips with different flash and RAM layout
- later.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Oct 24 23:47:37 2006 -0500
- Added support for Multi-Image files that contain a device tree
- If a Multi-Image file contains a third image we try to use it as a
- device tree. The device tree image is assumed to be uncompressed in the
- image file. We automatically allocate space for the device tree in memory
- and provide an 8k pad to allow more than a reasonable amount of growth.
- Additionally, a device tree that was contained in flash will now automatically
- get copied to system memory as part of boot. Previously an error was
- reported if one tried to boot a device tree that was in flash.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Oct 24 21:35:55 2006 +0200
- Switch to automatically generated CHANGELOG file.
- (use "make CHANGELOG" to update it from time to time)
- commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 24 18:06:48 2006 +0200
- Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
- Patch by Stefan Roese, 24 Oct 2006
- commit 8ae3b713b2286e0c3213b7802062e4c1599010de
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 17:24:55 2006 +0200
- Merge with /home/wd/git/u-boot/master
- commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 15:32:57 2006 +0200
- Code cleanup
- commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:51:36 2006 +0200
- Move atstk1000 files into vendor specific directory.
- Patch by Haavard Skinnemoen, 12 Sep 2006
- commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:42:37 2006 +0200
- Add ATSTK1000 and ATSTK1002 board support
- Patch by Haavard Skinnemoen, 06 Sep 2006
- This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
- daughterboard.
- ATSTK1000 is a full-featured development board for AT32AP CPUs. It
- has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
- and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
- CompactFlash cards. For more information, please see this page:
- http://www.atmel.com/dyn/products/tools.asp?family_id=682
- The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
- AT32AP7000 chip.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit f93ae788c3640fcde5db383471d45548ff4060d0
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:31:24 2006 +0200
- Add common serial driver for Atmel AT32 and AT91 chips
- Patch by Haavard Skinnemoen, 06 Sep 2006
- This is a first attempt at creating a common serial driver for Atmel
- chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
- be possible to support AT91RM9200 and other ARM-based chips with some
- minor modifications.
- There's nothing fundamentally AVR32-specific in this driver, but it
- does use some features which are currently only defined for the
- AT32AP CPU port:
- * pm_get_clock_freq: Obtain the clock frequency of a given domain
- * gd->console_uart: A "struct device" containing information about
- register mappings, gpio resources and clocks associated with the
- UART device.
- For more information about these features, please see the "AT32AP
- CPU" patch.
- commit 72a087e04705c26cad982879ebd06b5281bf825a
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:27:35 2006 +0200
- Add AT32AP CPU and AT32AP7000 SoC support
- Patch by Haavard Skinnemoen, 06 Sep 2006
- This patch adds support for the AT32AP CPU family and the AT32AP7000
- chip, which is the first chip implementing the AVR32 architecture.
- The AT32AP CPU core is a high-performance implementation featuring a
- 7-stage pipeline, separate instruction- and data caches, and a MMU.
- For more information, please see the "AVR32 AP Technical Reference":
- http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
- In addition to this, the AT32AP7000 chip comes with a large set of
- integrated peripherals, many of which are shared with the AT91 series
- of ARM-based microcontrollers from Atmel. Full data sheet is
- available here:
- http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 7b64fef33c66be648826c0ff9758298ef13d0604
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:21:16 2006 +0200
- Add AVR32 architecture support
- Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
- This patch adds common infrastructure code for the Atmel AVR32
- architecture. See doc/README.AVR32 for details.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 2da2d9a4766063b9848f3a35ad6025499cf87265
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 13:57:33 2006 +0200
- Use -g instead of -gstabs in AFLAGS_DEBUG
- Patch by Haavard Skinnemoen, 30 Aug 2006
- In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
- matter what the target's preferred debugging format is. This patch
- simply replaces -gstabs with -g, so that the default debugging format
- for the architecture is used.
- commit 965829872169c2996023840d98e1d85ad148d629
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 13:55:18 2006 +0200
- Fix/workaround broken dependency handling with make 3.81
- Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
- commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Mon Oct 23 22:17:05 2006 +0200
- Fix sequoia separate object direcory building problems.
- commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 20 17:16:35 2006 -0500
- Use generic I2C register block on 85xx and 86xx.
- Replace private IMMAP I2C structures with generic reg block
- and allow 86xx to have multiple I2C device busses.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 20 15:54:34 2006 -0500
- Fix compilation warnings on a few 85xx boards.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 20 15:50:15 2006 -0500
- Converted all 85xx boards to use a common FSL I2C driver.
- Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
- And removed hard i2c path from a few u-boot.lds scipts too.
- Minor whitespace cleanups along the way.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4d45f69e362b05892c9e92a7907e5820995612aa
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Oct 19 12:02:24 2006 -0500
- Rewrite a series of goto statements as a sequences of
- conditional expressions instead.
- Use consistent return code 0/-1 for good/bad indicators.
- Include one fewer file if the driver isn't used at all.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7237c033b02fe295880435f1eb80819a0c987532
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Oct 19 11:02:16 2006 -0500
- Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
- in an effort to begin to unify the umpteen FSL I2C drivers that
- are all otherwise very similar.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Oct 19 11:33:52 2006 -0500
- * Fix a bunch of compiler warnings for gcc 4.0
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 17 06:14:31 2006 +0200
- Add monitor functions for indirect access to PPC440 DCR's
- Patch by Leonid Baryudin, 12 Oct 2006
- commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 13 16:47:53 2006 -0500
- Fixed leading whitespace issues.
- Removed spurious LAWAR thing.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Oct 12 10:42:36 2006 -0500
- Remove unneeded include files and local variable.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Oct 10 00:23:32 2006 -0600
- Fix possible uninitialized variable compiler warning.
- When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
- do_bootm_linux() may be uninitialized. There is no possibility in the
- current code that len will get used uninitialized, but this fix follows
- the existing convention of setting both len and data to zero at the same
- time.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Oct 11 15:13:01 2006 -0500
- * Fix a bunch of compiler warnings for gcc 4.0
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit bf651baa365e5447246aad6a633ccd667cf24a39
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Oct 11 10:10:43 2006 -0500
- Move "ar" flags to config.mk to allow for silent "make -s"
- commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:19:03 2006 -0500
- Coding style changes to remove local varible blocks
- and reformat a bit nicer.
- commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:16:04 2006 -0500
- Fix whitespace issues.
- commit 7b382b7125f2397cce63253df62f183e3dfa2770
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:14:45 2006 -0500
- Fix whitespace issues.
- commit e10390ddd736b0dad1528eec4b0fe35c0827139a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:06:53 2006 -0500
- Fix whitespace issues.
- commit 89875e96ba3f023157bf50d5f8e33bf254964a76
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:03:43 2006 -0500
- Ran lindent and cleaned up whitespace issues.
- Format for 80-columns too.
- commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:02:22 2006 -0500
- Fix whitespace and 80-col issues.
- commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 7 11:36:51 2006 +0200
- CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
- Patch by Stefan Roese, 07 Oct 2006
- commit 5bc528fa4da751d472397b308137238a6465afd2
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 7 11:35:25 2006 +0200
- Update ALPR code (NAND support working now)
- Patch by Stefan Roese, 07 Oct 2006
- commit 77d5034847d328753b80c46b83f960a14a26f40e
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 7 11:33:03 2006 +0200
- Remove compile warnings in fpga code
- Patch by Stefan Roese, 07 Oct 2006
- commit f3443867e90d2979a7dd1c65b0d537777e1f9850
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 7 11:30:52 2006 +0200
- Add CONFIG_BOARD_RESET to configure board specific reset function
- Patch by Stefan Roese, 07 Oct 2006
- commit f55df18187e7a45cb73fec4370d12135e6691ae1
- Author: John Traill <john.traill@freescale.com>
- Date: Fri Sep 29 08:23:12 2006 +0100
- Fix missing tCycle/modfreq calculation.
- Signed-off-by: John Traill <john.traill@freescale.com>
- commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Sep 13 10:33:35 2006 -0500
- Updated config headers to add default FDT-based booting
- commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Sep 13 10:34:18 2006 -0500
- Add support for eTSEC 3 & 4 on 8548 CDS
- * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
- This will only work on rev 1.3 boards (but doesn't break older boards)
- * Cleaned up some comments to reflect the expanded role of tsec
- in other systems
- commit 084d648b109c8984f83674043c1a7fa3885ef801
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Sep 13 10:33:56 2006 -0500
- Added code to support 2.6.18 PCI changes in u-boot
- * Added code to swizzle the IRQ map for the PCI
- commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Sep 19 09:34:10 2006 -0500
- Modified makefile for new build mechanism.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d14ba6a798beb753e7a864500414fcc2d198b8bc
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Sep 14 08:40:36 2006 -0500
- Handle 86xx SVR values according to the new Reference Manual.
- Both 8641 and 8641D have SVR == 0x8090, and are distinguished
- by the byte in bits 16-23 instead.
- Thanks to Jason Jin for noticing.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Mon Aug 28 14:25:31 2006 +0800
- Fixed an OF-tree off-by-one bug when adding a new property name.
- This bug will cause the kernel booting to pause a long time.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
- commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 29 11:05:09 2006 -0500
- Remove trailing empty lines.
- commit cd6d73d5b895a5935ac4fde0a356288142a584e0
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 29 09:48:49 2006 -0500
- Remove bogus msync and use volatile asm.
- commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 29 08:17:14 2006 -0500
- Add myself as maintainer for MPC8641HPCN.
- commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Mon Aug 28 14:25:31 2006 +0800
- Fixed an OF-tree off-by-one bug when adding a new property name.
- This bug will cause the kernel booting to pause a long time.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Fri Aug 25 14:38:34 2006 -0400
- Change ramdiskaddr and dtbaddr
- Remove PEX fluff commands.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Aug 23 13:32:45 2006 -0500
- * Another small fix for booting with disable_of
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 23 11:04:43 2006 -0500
- Cleanup and lindent new AHCI driver.
- commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
- Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
- Date: Wed Aug 23 19:15:12 2006 +0800
- Add AHCI define and sata support for MPC8641HPCN board.
- Signed-off-by:Jason Jin<jason.jin@freescale.com>
- commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
- Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
- Date: Wed Aug 23 19:10:44 2006 +0800
- Add AHCI support to u-boot
- Add AHCI support in u-boot, enable the sata disk controllers which
- following the AHCI protocol.
- Signed-off-by:Jason Jin<jason.jin@freescale.com>
- commit d8ea2acf5f137cae99417df4f573d036ee384668
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Wed Aug 23 17:54:32 2006 +0800
- Add dtb boot-up parameter to default boot commands.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit b93775c2036b99baa390ea425c4771895bbc63c4
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 18:26:08 2006 -0500
- Cleanup even more poorly introduced whitespace.
- commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 18:07:00 2006 -0500
- Cleanup more poorly introduced whitespace.
- commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 17:54:05 2006 -0500
- Cleanup poorly introduced whitespace.
- commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 12:25:27 2006 -0500
- General indent and whitespace cleanups.
- commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 12:06:18 2006 -0500
- General indent and whitespace cleanups.
- commit 41a0e8b304d3ff55fe27a230507aac79684016ac
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 10:42:21 2006 -0500
- Cleanup compiler warnings.
- commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
- Author: Matthew McClintock <msm@freescale.com>
- Date: Tue Aug 22 09:31:59 2006 -0500
- Fix disable_of booting
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 87a449c8ac396420cb24260f717ea9e6faa82047
- Author: Matthew McClintock <msm@freescale.com>
- Date: Tue Aug 22 09:23:55 2006 -0500
- Support for FDT in uImage format, error when using FDT from flash
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 75c299c38369d01addd5e054b8a16217b70f4a86
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Aug 15 15:12:55 2006 -0400
- Unlock cache before kernel starts up for MPC86xx
- commit 67256678f00c09b0a7f19e862e5c1847553d31bc
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Aug 15 15:13:15 2006 -0400
- Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
- commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Aug 15 15:12:55 2006 -0400
- Unlock cache before kernel starts up for MPC86xx
- commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Aug 15 15:13:15 2006 -0400
- Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
- commit 86c8e17f25e972a7e272950a0735fad84e082b88
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Aug 16 13:59:47 2006 -0500
- * Fix disable_of booting
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Aug 16 10:54:09 2006 -0500
- * Support for FDT in uImage format, error when using FDT from flash
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 15 14:22:35 2006 +0200
- Add initial support for the ALPR board from Prodrive
- NAND needs some additional testing
- Patch by Heiko Schocher, 15 Aug 2006
- commit f0ff4692ff3372dec55074a8eb444943ab095abb
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 15 14:15:51 2006 +0200
- Add FPGA Altera Cyclone 2 support
- Patch by Heiko Schocher, 15 Aug 2006
- commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Aug 14 15:33:38 2006 -0500
- Fix BAT0 to actually be cacheable, non-guarded as documented.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 40bc83559db5745681909fd7382ae509567e116d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 9 15:32:16 2006 -0500
- Removed MPC8641HPCN DTS source file from build.
- It is no longer linked into U-Boot; its sources are
- now located in the kernel tree.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:47:03 2006 -0500
- * Switched default PCI speed for 8540 ADS back to 33MHz
- * Added comments and a printf to warn that PCI-X won't
- work at 33MHz
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:46:35 2006 -0500
- * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:46:13 2006 -0500
- * Added VIA configuration table
- * Added support for PCI2 on CDS
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit c88f9fe66b64247e5b6a38410ba315ca25596d16
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:45:41 2006 -0500
- * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 97074ed9655309b64231bc2cee69fe85399f8055
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:45:17 2006 -0500
- * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:44:49 2006 -0500
- * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit a4e11558b810ef2cddffdf7b9d86bc1130441960
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:44:23 2006 -0500
- * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:43:36 2006 -0500
- * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:43:00 2006 -0500
- * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
- commit 5498d90312aad9f6bdbf047986027c35b03cd163
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:42:24 2006 -0500
- * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
- commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:41:37 2006 -0500
- * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
- commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
- Author: John Traill <john.traill@freescale.com>
- Date: Wed Aug 9 14:33:50 2006 +0100
- Add Rapidio support for the MPC8641HPCN
- Signed-off-by: John Traill <john.traill@freescale.com>
- commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
- Author: John Traill <john.traill@freescale.com>
- Date: Tue Aug 8 11:32:43 2006 +0100
- Fix caslat calculation
- Signed-off-by: John Traill <john.traill@freescale.com>
- commit 709d3073e74153278e7904a70819bbef7df50e1a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Aug 3 16:17:56 2006 -0500
- Convert to mac-address in ethernet nodes.
- commit 71748af833ca1017edf1415be376366ff2937d17
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Fri Jul 28 12:41:35 2006 -0400
- Correct the irq value of DUART2
- commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Fri Jul 28 12:41:41 2006 -0400
- Change the space size of PEX IO in README
- commit 239db37c94f7a92941c4465feceb867c609241c5
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Fri Jul 28 12:41:18 2006 -0400
- Move get_board_sys_clk to board directory
- commit 492900b985439fbce1a118afde1e35def870db03
- Author: John Traill <john.traill@freescale.com>
- Date: Fri Jul 28 09:03:54 2006 +0100
- Fix 8641HPCN pollution
- commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
- Author: John Traill <john.traill@freescale.com>
- Date: Fri Jul 28 08:16:06 2006 +0100
- Fix 8641HPCN timebase
- commit c86360b830f1eecd7a72208575dde4f57879faea
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Fri Jul 28 00:01:34 2006 +0800
- Fixed OF device tree of mpc86xxhpcn board.
- The changes works in with kernel irq mapping rework.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit bea3f28d285942bf3f7ab339ce85178ded544225
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Wed Jul 12 10:48:05 2006 -0400
- Add support for reading and writing mac addresses to or from ID EEPROM.
- Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
- With attached patch, we can use command "mac/mac read/mac save/"
- to read and write EEPROM under u-boot prompt.
- U-boot will calculate the checksum of EEPROM while bootup,
- if it is right, then u-boot will check whether the mac address
- of eTSEC0/1/2/3 is availalbe (non-zero).
- If there is mac address availabe in EEPROM, u-boot will use it,
- otherewise, u-boot will use the mac address defined in
- MPC8641HPCN.h. This matches the requirement to set unique mac address
- for each TSEC port.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
- Author: Jin Zhengxiong <Jason.Jin@freescale.com>
- Date: Thu Jul 13 10:35:10 2006 -0500
- Fixed initrd issue by define big RAM
- Signed-off-by:Jason Jin <Jason.jin@freescale.com>
- commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 7 10:01:45 2006 -0500
- We made a u-boot patch to fix the hang up issue
- when booting filesystem from ramdisk.
- Signed-off-by:Jason Jin <Jason.jin@freescale.com>
- commit 38433ccc5850ee70549af0b2bc5b920355ef5388
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:47:03 2006 -0500
- * Switched default PCI speed for 8540 ADS back to 33MHz
- * Added comments and a printf to warn that PCI-X won't
- work at 33MHz
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:46:35 2006 -0500
- * Fixed a bug where 8555 PCI code used the old variable and
- function names
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:46:13 2006 -0500
- * Added VIA configuration table
- * Added support for PCI2 on CDS
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:45:41 2006 -0500
- * Fixed PCI memory definitions
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 087454609e47295443af793a282cddcd91a5f49c
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:45:17 2006 -0500
- * Added support for initializing second PCI bus on 85xx
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:44:49 2006 -0500
- * Added PCI-X #defines for PCI-X initialization
- Patch by Andy Fleming on 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:44:23 2006 -0500
- * Made sure the code which disables prefetch for PCI devices
- sets the size of the prefetch region to 0
- Patch by Andy Fleming on 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 40d5fa35d02df22580593bf0039ab173367e8ef0
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:43:36 2006 -0500
- * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
- Patch by Jon Loeliger 17-Jan-2006
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit be7e8b0cb5a0c49dc180075b96df296a893bf146
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:43:00 2006 -0500
- * Removed the oftree.dts for stxxtx in light of the changes
- to the flat device tree handling code
- Patch by Matthew McClintock 26-June-2006
- commit 1b380ec225665e73959677f3893dc658c5925e05
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:42:24 2006 -0500
- * Patch to modify ft_build.c to update flat device trees in place
- Patch by Matthew McClintock 26-June-2006
- commit 98a9c4d468a942a09ebe8979bec508017f3e4462
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:41:37 2006 -0500
- * Modify bootm command to support booting with flat device trees
- Patch by Matthew McClintock 26-June-2006
- commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
- Author: Jin Zhengxiong <Jason.Jin@freescale.com>
- Date: Wed Jun 28 08:43:56 2006 -0500
- Change Id to symbolic name for RTL8139
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
- Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
- Date: Tue Jun 27 18:12:10 2006 +0800
- Fix RTL8139 in big endian
- signed-off-by: Jason Jin <Jason.Jin@freescale.com>
- signed-off-by: Wei Zhang <wei.zhang@freescale.com>
- commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
- Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
- Date: Tue Jun 27 18:12:23 2006 +0800
- Fix Tsec bug when no link
- When tftp a non-exist file from the tftp server, u-boot will check
- the link of all eth port. The original file will return wrong link
- state on the no link ports.
- signed-off-by: Jason Jin <Jason.Jin@freescale.com>
- commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
- Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
- Date: Tue Jun 27 18:12:02 2006 +0800
- Fix bug for io_bar size during pci scan
- During the pci scan process, Some devices return bar_reponse with the
- highest bytes 0, such as the pci bridge in uli1575 return bar_response
- with 0xffffff, So the bar_size should be manually set under 64K.
- Signed-off-by: Jason Jin <jason.jin@freescale.com>
- commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
- Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
- Date: Tue Jun 27 18:11:54 2006 +0800
- Enable PCIE1 for MPC8641HPCN board
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 99d70e3a47affb9bae041a2caece7cd516e213b3
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Jun 26 11:06:00 2006 +0200
- More code cleanup
- commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jun 22 08:51:46 2006 -0500
- Fix bug in 8641hpcn reset command with no args.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Tue Jun 20 17:47:15 2006 +0800
- Reworked IRQ mapping in OF-tree.
- commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jun 15 21:33:37 2006 -0500
- Do not enable address translation on secondary CPUs.
- Do not set up BATs on secondary CPUs. Let Linux do the nasty.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 386eda022473394ad8f36b86f2bdc9b4cb816291
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Jun 14 18:14:56 2006 +0200
- Code cleanup
- commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Jun 14 17:45:53 2006 +0200
- Various USB related patches
- - Add support for mpc8xx USB device.
- - Add support for Common Device Class - Abstract Control Model USB console.
- - Add support for flow control in USB slave devices.
- - Add support for switching between gserial and cdc_acm using environment.
- - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
- - Update usbcore slightly to ease host enumeration.
- - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
- - Add AdderUSB_config as a defconfig to enable usage of the USB console
- by default with the Adder87x U-Boot port.
- Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
- commit 8ecc971618f56029ad99d3516f8b297a6ed58971
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 7 10:53:55 2006 -0500
- Fix a get_board_sys_clk() use-before-def warning.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 7 10:52:49 2006 -0500
- Allow DTC path to be passed in.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Jun 6 16:54:29 2006 -0400
- Modify the IRQ of DUART2
- commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 13:55:35 2006 -0500
- Review cleanups.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 12:44:44 2006 -0500
- White space cleanup.
- Some 80-column cleanups.
- Convert printf() to puts() where possible.
- Use #include "spd_sdram.h" as needed.
- Enhanced reset command usage message a bit.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 11:39:34 2006 -0500
- Removed unneeded local_bus_init() from 8641HPCN board.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4d3d729c16c392d2982d3266b659d333c927697d
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 11:24:28 2006 -0500
- Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b2a941de060350ad15878d8219825f4950e9bb8e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 10:07:28 2006 -0500
- Remove dead debug code.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit 126aa70f10ba3d20e0a6f4d32328250513b77770
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue May 30 17:47:00 2006 -0500
- Move mpc86xx PIXIS code to board directory
- First cut at moving the PIXIS platform code out of
- the 86xx cpu directory and into board/mpc8641hpcn
- where it belongs.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue May 30 16:56:14 2006 +0200
- Support generic OHCI support for the s3c24x0 cpu.
- commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Tue May 30 09:10:32 2006 -0500
- Improve "reset" command's interaction with watchdog.
- "reset altbank" will reset another bank WITHOUT watch dog timer enabled
- "reset altbank wd" will reset another bank WITH watch dog enabled
- "diswd" will disable watch dog after u-boot boots up successfully
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Tue May 30 08:51:19 2006 -0500
- Fix two SDRAM setup bugs.
- Fix ECC setup bug.
- Enable 1T/2T based on number of DIMMs present.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit d11fec5015334deb2010e36ce00bb118cc5429a5
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri May 26 10:24:48 2006 -0500
- Add first draft of the MPC8641HPCN doc/README.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri May 26 10:13:04 2006 -0500
- Added pci@8000 block.
- Updated ethernet interrupt mappings (moved up 48).
- Cleaned up a few comments.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri May 26 10:01:16 2006 -0500
- Allow args on reset command.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue May 23 13:38:35 2006 +0200
- Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
- fixes to the latter.
- commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue May 23 10:33:11 2006 +0200
- More cleanup for the delta board and the generic usb_ohci driver. Added
- CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
- initialization and cleanup hooks respectively.
- commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon May 22 16:33:54 2006 +0200
- This patch adds USB storage support for the delta board. This is the first
- board to make use of a generic OHCI driver, that calls hooks for board
- dependant initialization.
- commit 14e37081ff3cac7ebe6e93836523429853b6b292
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 13:28:39 2006 -0500
- Change arbitration to round-robin for SMP linux.
- commit 9a655876e5995be80f49054e2509500e871e4d3a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 13:26:34 2006 -0500
- Enable dual DDR controllers and interleaving.
- commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 13:22:44 2006 -0500
- Update 86xx address map and LAWBARs.
- commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 13:14:15 2006 -0500
- Remove L2 Cache invalidate polling.
- commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 12:33:09 2006 -0500
- Enable 2nd CPU and I2C.
- commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon May 15 07:26:56 2006 -0500
- Update interrupt mapping.
- commit 6cfea33477b04b63ed47386ed1629529484c33ba
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Wed May 10 09:38:06 2006 -0500
- Remove unneeded INIT_RAM_LOCK cache twiddling.
- Correctly tracks r29 as global data pointer now.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed May 10 09:33:07 2006 -0500
- Remove unnecessary flash.c file.
- commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue May 9 08:23:49 2006 -0500
- Get MPC8641HPCN flash images working.
- Enable the CFI driver.
- Remove bogus LAWBAR7 cruft.
- Use correct TEXT_BASE, Fixup load script.
- Enable SPD EEPROM during DDR setup.
- Use generic RFC 1918 IP addresses by default.
- commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Apr 27 10:15:16 2006 -0500
- Cleanup whitespaces and style issues.
- Removed //-style comments.
- Use 80-column lines.
- Remove trailing whitespace.
- Remove dead code and debug cruft.
- commit a2320a6bf8113a09544c42d160d10ac69d049a03
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Apr 27 08:22:39 2006 -0500
- Revert bad PCI prefetch limit change.
- commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Apr 26 17:58:56 2006 -0500
- Initial support for MPC8641 HPCN board.
|
