funcmux.c 5.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200
  1. /*
  2. * Copyright (c) 2011 The Chromium OS Authors.
  3. * See file CREDITS for list of people who contributed to this
  4. * project.
  5. *
  6. * This program is free software; you can redistribute it and/or
  7. * modify it under the terms of the GNU General Public License as
  8. * published by the Free Software Foundation; either version 2 of
  9. * the License, or (at your option) any later version.
  10. *
  11. * This program is distributed in the hope that it will be useful,
  12. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14. * GNU General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program; if not, write to the Free Software
  18. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  19. * MA 02111-1307 USA
  20. */
  21. /* Tegra2 high-level function multiplexing */
  22. #include <common.h>
  23. #include <asm/arch/clock.h>
  24. #include <asm/arch/funcmux.h>
  25. #include <asm/arch/pinmux.h>
  26. int funcmux_select(enum periph_id id, int config)
  27. {
  28. int bad_config = config != FUNCMUX_DEFAULT;
  29. switch (id) {
  30. case PERIPH_ID_UART1:
  31. if (config == FUNCMUX_UART1_IRRX_IRTX) {
  32. pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
  33. pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
  34. pinmux_tristate_disable(PINGRP_IRRX);
  35. pinmux_tristate_disable(PINGRP_IRTX);
  36. /*
  37. * Tegra appears to boot with function UARTA pre-
  38. * selected on mux group SDB. If two mux groups are
  39. * both set to the same function, it's unclear which
  40. * group's pins drive the RX signals into the HW.
  41. * For UARTA, SDB certainly overrides group IRTX in
  42. * practice. To solve this, configure some alternative
  43. * function on SDB to avoid the conflict. Also, tri-
  44. * state the group to avoid driving any signal onto it
  45. * until we know what's connected.
  46. */
  47. pinmux_tristate_enable(PINGRP_SDB);
  48. pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
  49. }
  50. break;
  51. case PERIPH_ID_UART2:
  52. if (config == FUNCMUX_UART2_IRDA) {
  53. pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
  54. pinmux_tristate_disable(PINGRP_UAD);
  55. }
  56. break;
  57. case PERIPH_ID_UART4:
  58. if (config == FUNCMUX_UART4_GMC) {
  59. pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
  60. pinmux_tristate_disable(PINGRP_GMC);
  61. }
  62. break;
  63. case PERIPH_ID_DVC_I2C:
  64. /* there is only one selection, pinmux_config is ignored */
  65. if (config == FUNCMUX_DVC_I2CP) {
  66. pinmux_set_func(PINGRP_I2CP, PMUX_FUNC_I2C);
  67. pinmux_tristate_disable(PINGRP_I2CP);
  68. }
  69. break;
  70. case PERIPH_ID_I2C1:
  71. /* support pinmux_config of 0 for now, */
  72. if (config == FUNCMUX_I2C1_RM) {
  73. pinmux_set_func(PINGRP_RM, PMUX_FUNC_I2C);
  74. pinmux_tristate_disable(PINGRP_RM);
  75. }
  76. break;
  77. case PERIPH_ID_I2C2: /* I2C2 */
  78. switch (config) {
  79. case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */
  80. pinmux_set_func(PINGRP_DDC, PMUX_FUNC_I2C2);
  81. /* PTA to HDMI */
  82. pinmux_set_func(PINGRP_PTA, PMUX_FUNC_HDMI);
  83. pinmux_tristate_disable(PINGRP_DDC);
  84. break;
  85. case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */
  86. pinmux_set_func(PINGRP_PTA, PMUX_FUNC_I2C2);
  87. /* set DDC_SEL to RSVDx (RSVD2 works for now) */
  88. pinmux_set_func(PINGRP_DDC, PMUX_FUNC_RSVD2);
  89. pinmux_tristate_disable(PINGRP_PTA);
  90. bad_config = 0;
  91. break;
  92. }
  93. break;
  94. case PERIPH_ID_I2C3: /* I2C3 */
  95. /* support pinmux_config of 0 for now */
  96. if (config == FUNCMUX_I2C3_DTF) {
  97. pinmux_set_func(PINGRP_DTF, PMUX_FUNC_I2C3);
  98. pinmux_tristate_disable(PINGRP_DTF);
  99. }
  100. break;
  101. case PERIPH_ID_SDMMC2:
  102. if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) {
  103. pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2);
  104. pinmux_set_func(PINGRP_DTD, PMUX_FUNC_SDIO2);
  105. pinmux_tristate_disable(PINGRP_DTA);
  106. pinmux_tristate_disable(PINGRP_DTD);
  107. }
  108. break;
  109. case PERIPH_ID_SDMMC3:
  110. switch (config) {
  111. case FUNCMUX_SDMMC3_SDB_SLXA_8BIT:
  112. pinmux_set_func(PINGRP_SLXA, PMUX_FUNC_SDIO3);
  113. pinmux_set_func(PINGRP_SLXC, PMUX_FUNC_SDIO3);
  114. pinmux_set_func(PINGRP_SLXD, PMUX_FUNC_SDIO3);
  115. pinmux_set_func(PINGRP_SLXK, PMUX_FUNC_SDIO3);
  116. pinmux_tristate_disable(PINGRP_SLXA);
  117. pinmux_tristate_disable(PINGRP_SLXC);
  118. pinmux_tristate_disable(PINGRP_SLXD);
  119. pinmux_tristate_disable(PINGRP_SLXK);
  120. /* fall through */
  121. case FUNCMUX_SDMMC3_SDB_4BIT:
  122. pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
  123. pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
  124. pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
  125. pinmux_tristate_disable(PINGRP_SDB);
  126. pinmux_tristate_disable(PINGRP_SDC);
  127. pinmux_tristate_disable(PINGRP_SDD);
  128. bad_config = 0;
  129. break;
  130. }
  131. break;
  132. case PERIPH_ID_SDMMC4:
  133. switch (config) {
  134. case FUNCMUX_SDMMC4_ATC_ATD_8BIT:
  135. pinmux_set_func(PINGRP_ATC, PMUX_FUNC_SDIO4);
  136. pinmux_set_func(PINGRP_ATD, PMUX_FUNC_SDIO4);
  137. pinmux_tristate_disable(PINGRP_ATC);
  138. pinmux_tristate_disable(PINGRP_ATD);
  139. break;
  140. case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT:
  141. pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
  142. pinmux_tristate_disable(PINGRP_GME);
  143. /* fall through */
  144. case FUNCMUX_SDMMC4_ATB_GMA_4_BIT:
  145. pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
  146. pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
  147. pinmux_tristate_disable(PINGRP_ATB);
  148. pinmux_tristate_disable(PINGRP_GMA);
  149. bad_config = 0;
  150. break;
  151. }
  152. break;
  153. case PERIPH_ID_KBC:
  154. if (config == FUNCMUX_DEFAULT) {
  155. enum pmux_pingrp grp[] = {PINGRP_KBCA, PINGRP_KBCB,
  156. PINGRP_KBCC, PINGRP_KBCD, PINGRP_KBCE,
  157. PINGRP_KBCF};
  158. int i;
  159. for (i = 0; i < ARRAY_SIZE(grp); i++) {
  160. pinmux_tristate_disable(grp[i]);
  161. pinmux_set_func(grp[i], PMUX_FUNC_KBC);
  162. pinmux_set_pullupdown(grp[i], PMUX_PULL_UP);
  163. }
  164. break;
  165. }
  166. default:
  167. debug("%s: invalid periph_id %d", __func__, id);
  168. return -1;
  169. }
  170. if (bad_config) {
  171. debug("%s: invalid config %d for periph_id %d", __func__,
  172. config, id);
  173. return -1;
  174. }
  175. return 0;
  176. }