123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117 |
- /*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- #include <common.h>
- #include <i2c.h>
- #include <flash.h>
- #include <nand.h>
- #include <asm/io.h>
- DECLARE_GLOBAL_DATA_PTR;
- int board_init(void)
- {
- /* arch number of NetStar board */
- gd->bd->bi_arch_number = MACH_TYPE_NETSTAR;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
- return 0;
- }
- int dram_init(void)
- {
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- /* Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete. */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
- udelay(10); /* doesn't work before interrupt_init call */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
- udelay(500);
- return 0;
- }
- int misc_init_r(void)
- {
- #if defined(CONFIG_RTC_DS1307)
- /* enable trickle charge */
- i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0x10, 0xaa);
- #endif
- return 0;
- }
- int board_late_init(void)
- {
- return 0;
- }
- #if defined(CONFIG_CMD_FLASH)
- ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info)
- {
- if (banknum == 0) { /* AM29LV800 boot flash */
- info->portwidth = FLASH_CFI_16BIT;
- info->chipwidth = FLASH_CFI_BY16;
- info->interface = FLASH_CFI_X16;
- return 1;
- }
- return 0;
- }
- #endif
- #if defined(CONFIG_CMD_NAND)
- /*
- * hardware specific access to control-lines
- *
- * NAND_NCE: bit 0 - don't care
- * NAND_CLE: bit 1 -> bit 1 (0x0002)
- * NAND_ALE: bit 2 -> bit 2 (0x0004)
- */
- static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
- {
- struct nand_chip *chip = mtd->priv;
- unsigned long mask;
- if (cmd == NAND_CMD_NONE)
- return;
- mask = (ctrl & NAND_CLE) ? 0x02 : 0;
- if (ctrl & NAND_ALE)
- mask |= 0x04;
- writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask);
- }
- int board_nand_init(struct nand_chip *nand)
- {
- nand->options = NAND_SAMSUNG_LP_OPTIONS;
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->cmd_ctrl = netstar_nand_hwcontrol;
- nand->chip_delay = 400;
- return 0;
- }
- #endif
|