Becky Bruce
9973e3c614
Change initdram() return type to phys_size_t
|
17 ani în urmă | |
|---|---|---|
| .. | ||
| Makefile | 19 ani în urmă | |
| README | 22 ani în urmă | |
| config.mk | 22 ani în urmă | |
| ee_access.c | 23 ani în urmă | |
| ee_access.h | 23 ani în urmă | |
| ee_dev.h | 23 ani în urmă | |
| flash.c | 17 ani în urmă | |
| gth.c | 17 ani în urmă | |
| pcmcia.c | 18 ani în urmă | |
| u-boot.lds | 17 ani în urmă | |
README
Written by Thomas.Lange@corelatus.com 010805
To make a system for gth that actually works ;-)
the variable TBASE needs to be set to 0,1 or 2
depending on location where image is supposed to
be started from.
E.g. make TBASE=1
0: Start from RAM, base 0
1: Start from flash_base + 0x10070
2: Start from flash_base + 0x30070
When using 1 or 2, the image is supposed to be launched
from miniboot that boots the first U-Boot image found in
flash.
For miniboot code, description, see www.opensource.se
To make a system for gth that actually works ;-)
the variable TBASE needs to be set to 0,1 or 2
depending on location where image is supposed to
be started from.
E.g. make TBASE=1
0: Start from RAM, base 0
1: Start from flash_base + 0x10070
2: Start from flash_base + 0x30070
When using 1 or 2, the image is supposed to be launched
from miniboot that boots the first U-Boot image found in
flash.
For miniboot code, description, see www.opensource.se