common.h 27 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985
  1. /*
  2. * (C) Copyright 2000-2009
  3. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. #ifndef __COMMON_H_
  24. #define __COMMON_H_ 1
  25. #undef _LINUX_CONFIG_H
  26. #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
  27. #ifndef __ASSEMBLY__ /* put C only stuff in this section */
  28. typedef unsigned char uchar;
  29. typedef volatile unsigned long vu_long;
  30. typedef volatile unsigned short vu_short;
  31. typedef volatile unsigned char vu_char;
  32. #include <config.h>
  33. #include <asm-offsets.h>
  34. #include <linux/bitops.h>
  35. #include <linux/types.h>
  36. #include <linux/string.h>
  37. #include <asm/ptrace.h>
  38. #include <stdarg.h>
  39. #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
  40. #include <pci.h>
  41. #endif
  42. #if defined(CONFIG_8xx)
  43. #include <asm/8xx_immap.h>
  44. #if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
  45. defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
  46. defined(CONFIG_MPC859DSL) || \
  47. defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
  48. defined(CONFIG_MPC866P)
  49. # define CONFIG_MPC866_FAMILY 1
  50. #elif defined(CONFIG_MPC870) \
  51. || defined(CONFIG_MPC875) \
  52. || defined(CONFIG_MPC880) \
  53. || defined(CONFIG_MPC885)
  54. # define CONFIG_MPC885_FAMILY 1
  55. #endif
  56. #if defined(CONFIG_MPC860) \
  57. || defined(CONFIG_MPC860T) \
  58. || defined(CONFIG_MPC866_FAMILY) \
  59. || defined(CONFIG_MPC885_FAMILY)
  60. # define CONFIG_MPC86x 1
  61. #endif
  62. #elif defined(CONFIG_5xx)
  63. #include <asm/5xx_immap.h>
  64. #elif defined(CONFIG_MPC5xxx)
  65. #include <mpc5xxx.h>
  66. #elif defined(CONFIG_MPC512X)
  67. #include <asm/immap_512x.h>
  68. #elif defined(CONFIG_MPC8220)
  69. #include <asm/immap_8220.h>
  70. #elif defined(CONFIG_8260)
  71. #if defined(CONFIG_MPC8247) \
  72. || defined(CONFIG_MPC8248) \
  73. || defined(CONFIG_MPC8271) \
  74. || defined(CONFIG_MPC8272)
  75. #define CONFIG_MPC8272_FAMILY 1
  76. #endif
  77. #if defined(CONFIG_MPC8272_FAMILY)
  78. #define CONFIG_MPC8260 1
  79. #endif
  80. #include <asm/immap_8260.h>
  81. #endif
  82. #ifdef CONFIG_MPC86xx
  83. #include <mpc86xx.h>
  84. #include <asm/immap_86xx.h>
  85. #endif
  86. #ifdef CONFIG_MPC85xx
  87. #include <mpc85xx.h>
  88. #include <asm/immap_85xx.h>
  89. #endif
  90. #ifdef CONFIG_MPC83xx
  91. #include <mpc83xx.h>
  92. #include <asm/immap_83xx.h>
  93. #endif
  94. #ifdef CONFIG_4xx
  95. #include <asm/ppc4xx.h>
  96. #endif
  97. #ifdef CONFIG_HYMOD
  98. #include <board/hymod/hymod.h>
  99. #endif
  100. #ifdef CONFIG_ARM
  101. #define asmlinkage /* nothing */
  102. #endif
  103. #ifdef CONFIG_BLACKFIN
  104. #include <asm/blackfin.h>
  105. #endif
  106. #ifdef CONFIG_SOC_DA8XX
  107. #include <asm/arch/hardware.h>
  108. #endif
  109. #include <part.h>
  110. #include <flash.h>
  111. #include <image.h>
  112. #ifdef DEBUG
  113. #define _DEBUG 1
  114. #else
  115. #define _DEBUG 0
  116. #endif
  117. /*
  118. * Output a debug text when condition "cond" is met. The "cond" should be
  119. * computed by a preprocessor in the best case, allowing for the best
  120. * optimization.
  121. */
  122. #define debug_cond(cond, fmt, args...) \
  123. do { \
  124. if (cond) \
  125. printf(fmt, ##args); \
  126. } while (0)
  127. #define debug(fmt, args...) \
  128. debug_cond(_DEBUG, fmt, ##args)
  129. /*
  130. * An assertion is run-time check done in debug mode only. If DEBUG is not
  131. * defined then it is skipped. If DEBUG is defined and the assertion fails,
  132. * then it calls panic*( which may or may not reset/halt U-Boot (see
  133. * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
  134. * before release, and after release it is hoped that they don't matter. But
  135. * in any case these failing assertions cannot be fixed with a reset (which
  136. * may just do the same assertion again).
  137. */
  138. void __assert_fail(const char *assertion, const char *file, unsigned line,
  139. const char *function);
  140. #define assert(x) \
  141. ({ if (!(x) && _DEBUG) \
  142. __assert_fail(#x, __FILE__, __LINE__, __func__); })
  143. #define error(fmt, args...) do { \
  144. printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
  145. ##args, __FILE__, __LINE__, __func__); \
  146. } while (0)
  147. #ifndef BUG
  148. #define BUG() do { \
  149. printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
  150. panic("BUG!"); \
  151. } while (0)
  152. #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
  153. #endif /* BUG */
  154. /* Force a compilation error if condition is true */
  155. #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
  156. typedef void (interrupt_handler_t)(void *);
  157. #include <asm/u-boot.h> /* boot information for Linux kernel */
  158. #include <asm/global_data.h> /* global data used for startup functions */
  159. /*
  160. * enable common handling for all TQM8xxL/M boards:
  161. * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
  162. * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
  163. * and for the TQM885D board
  164. */
  165. #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
  166. defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
  167. defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
  168. # ifndef CONFIG_TQM8xxM
  169. # define CONFIG_TQM8xxM
  170. # endif
  171. #endif
  172. #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
  173. defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
  174. defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
  175. defined(CONFIG_TQM885D)
  176. # ifndef CONFIG_TQM8xxL
  177. # define CONFIG_TQM8xxL
  178. # endif
  179. #endif
  180. #ifndef CONFIG_SERIAL_MULTI
  181. #if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) \
  182. || defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \
  183. || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
  184. #define CONFIG_SERIAL_MULTI 1
  185. #endif
  186. #endif /* CONFIG_SERIAL_MULTI */
  187. /*
  188. * General Purpose Utilities
  189. */
  190. #define min(X, Y) \
  191. ({ typeof (X) __x = (X); \
  192. typeof (Y) __y = (Y); \
  193. (__x < __y) ? __x : __y; })
  194. #define max(X, Y) \
  195. ({ typeof (X) __x = (X); \
  196. typeof (Y) __y = (Y); \
  197. (__x > __y) ? __x : __y; })
  198. #define MIN(x, y) min(x, y)
  199. #define MAX(x, y) max(x, y)
  200. /*
  201. * Return the absolute value of a number.
  202. *
  203. * This handles unsigned and signed longs, ints, shorts and chars. For all
  204. * input types abs() returns a signed long.
  205. *
  206. * For 64-bit types, use abs64()
  207. */
  208. #define abs(x) ({ \
  209. long ret; \
  210. if (sizeof(x) == sizeof(long)) { \
  211. long __x = (x); \
  212. ret = (__x < 0) ? -__x : __x; \
  213. } else { \
  214. int __x = (x); \
  215. ret = (__x < 0) ? -__x : __x; \
  216. } \
  217. ret; \
  218. })
  219. #define abs64(x) ({ \
  220. s64 __x = (x); \
  221. (__x < 0) ? -__x : __x; \
  222. })
  223. #if defined(CONFIG_ENV_IS_EMBEDDED)
  224. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  225. #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
  226. (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
  227. defined(CONFIG_ENV_IS_IN_NVRAM)
  228. #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
  229. #else
  230. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  231. #endif
  232. /**
  233. * container_of - cast a member of a structure out to the containing structure
  234. * @ptr: the pointer to the member.
  235. * @type: the type of the container struct this is embedded in.
  236. * @member: the name of the member within the struct.
  237. *
  238. */
  239. #define container_of(ptr, type, member) ({ \
  240. const typeof( ((type *)0)->member ) *__mptr = (ptr); \
  241. (type *)( (char *)__mptr - offsetof(type,member) );})
  242. /*
  243. * Function Prototypes
  244. */
  245. void hang (void) __attribute__ ((noreturn));
  246. int timer_init(void);
  247. int cpu_init(void);
  248. /* */
  249. phys_size_t initdram (int);
  250. int display_options (void);
  251. void print_size(unsigned long long, const char *);
  252. int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
  253. /* common/main.c */
  254. void main_loop (void);
  255. int run_command(const char *cmd, int flag);
  256. /**
  257. * Run a list of commands separated by ; or even \0
  258. *
  259. * Note that if 'len' is not -1, then the command does not need to be nul
  260. * terminated, Memory will be allocated for the command in that case.
  261. *
  262. * @param cmd List of commands to run, each separated bu semicolon
  263. * @param len Length of commands excluding terminator if known (-1 if not)
  264. * @param flag Execution flags (CMD_FLAG_...)
  265. * @return 0 on success, or != 0 on error.
  266. */
  267. int run_command_list(const char *cmd, int len, int flag);
  268. int readline (const char *const prompt);
  269. int readline_into_buffer(const char *const prompt, char *buffer,
  270. int timeout);
  271. int parse_line (char *, char *[]);
  272. void init_cmd_timeout(void);
  273. void reset_cmd_timeout(void);
  274. #ifdef CONFIG_MENU
  275. int abortboot(int bootdelay);
  276. #endif
  277. extern char console_buffer[];
  278. /* arch/$(ARCH)/lib/board.c */
  279. void board_init_f (ulong) __attribute__ ((noreturn));
  280. void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
  281. int checkboard (void);
  282. int checkflash (void);
  283. int checkdram (void);
  284. int last_stage_init(void);
  285. extern ulong monitor_flash_len;
  286. int mac_read_from_eeprom(void);
  287. extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */
  288. int set_cpu_clk_info(void);
  289. /* common/flash.c */
  290. void flash_perror (int);
  291. /* common/cmd_source.c */
  292. int source (ulong addr, const char *fit_uname);
  293. extern ulong load_addr; /* Default Load Address */
  294. extern ulong save_addr; /* Default Save Address */
  295. extern ulong save_size; /* Default Save Size */
  296. /* common/cmd_doc.c */
  297. void doc_probe(unsigned long physadr);
  298. /* common/cmd_net.c */
  299. int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  300. /* common/cmd_fat.c */
  301. int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
  302. /* common/cmd_ext2.c */
  303. int do_ext2load(cmd_tbl_t *, int, int, char * const []);
  304. /* common/cmd_nvedit.c */
  305. int env_init (void);
  306. void env_relocate (void);
  307. int envmatch (uchar *, int);
  308. char *getenv (const char *);
  309. int getenv_f (const char *name, char *buf, unsigned len);
  310. ulong getenv_ulong(const char *name, int base, ulong default_val);
  311. int saveenv (void);
  312. #ifdef CONFIG_PPC /* ARM version to be fixed! */
  313. int inline setenv (const char *, const char *);
  314. #else
  315. int setenv (const char *, const char *);
  316. int setenv_ulong(const char *varname, ulong value);
  317. int setenv_addr(const char *varname, const void *addr);
  318. #endif /* CONFIG_PPC */
  319. #ifdef CONFIG_ARM
  320. # include <asm/mach-types.h>
  321. # include <asm/setup.h>
  322. # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
  323. #endif /* CONFIG_ARM */
  324. #ifdef CONFIG_X86 /* x86 version to be fixed! */
  325. # include <asm/u-boot-x86.h>
  326. #endif /* CONFIG_X86 */
  327. #ifdef CONFIG_SANDBOX
  328. # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
  329. #endif
  330. #ifdef CONFIG_NDS32
  331. # include <asm/mach-types.h>
  332. # include <asm/u-boot-nds32.h>
  333. #endif /* CONFIG_NDS32 */
  334. #ifdef CONFIG_MIPS
  335. # include <asm/u-boot-mips.h>
  336. #endif /* CONFIG_MIPS */
  337. #ifdef CONFIG_AUTO_COMPLETE
  338. int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
  339. #endif
  340. int get_env_id (void);
  341. void pci_init (void);
  342. void pci_init_board(void);
  343. void pciinfo (int, int);
  344. #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
  345. int pci_pre_init (struct pci_controller *);
  346. int is_pci_host (struct pci_controller *);
  347. #endif
  348. #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
  349. # if defined(CONFIG_SYS_PCI_TARGET_INIT)
  350. void pci_target_init (struct pci_controller *);
  351. # endif
  352. # if defined(CONFIG_SYS_PCI_MASTER_INIT)
  353. void pci_master_init (struct pci_controller *);
  354. # endif
  355. #if defined(CONFIG_440SPE) || \
  356. defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
  357. defined(CONFIG_405EX)
  358. void pcie_setup_hoses(int busno);
  359. #endif
  360. #endif
  361. int misc_init_f (void);
  362. int misc_init_r (void);
  363. /* common/exports.c */
  364. void jumptable_init(void);
  365. /* common/kallsysm.c */
  366. const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
  367. /* api/api.c */
  368. void api_init (void);
  369. /* common/memsize.c */
  370. long get_ram_size (long *, long);
  371. /* $(BOARD)/$(BOARD).c */
  372. void reset_phy (void);
  373. void fdc_hw_init (void);
  374. /* $(BOARD)/eeprom.c */
  375. void eeprom_init (void);
  376. #ifndef CONFIG_SPI
  377. int eeprom_probe (unsigned dev_addr, unsigned offset);
  378. #endif
  379. int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  380. int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  381. #ifdef CONFIG_LWMON
  382. extern uchar pic_read (uchar reg);
  383. extern void pic_write (uchar reg, uchar val);
  384. #endif
  385. /*
  386. * Set this up regardless of board
  387. * type, to prevent errors.
  388. */
  389. #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
  390. # define CONFIG_SYS_DEF_EEPROM_ADDR 0
  391. #else
  392. #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
  393. # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
  394. #endif
  395. #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
  396. #if defined(CONFIG_SPI)
  397. extern void spi_init_f (void);
  398. extern void spi_init_r (void);
  399. extern ssize_t spi_read (uchar *, int, uchar *, int);
  400. extern ssize_t spi_write (uchar *, int, uchar *, int);
  401. #endif
  402. #ifdef CONFIG_RPXCLASSIC
  403. void rpxclassic_init (void);
  404. #endif
  405. void rpxlite_init (void);
  406. #ifdef CONFIG_MBX
  407. /* $(BOARD)/mbx8xx.c */
  408. void mbx_init (void);
  409. void board_serial_init (void);
  410. void board_ether_init (void);
  411. #endif
  412. #ifdef CONFIG_HERMES
  413. /* $(BOARD)/hermes.c */
  414. void hermes_start_lxt980 (int speed);
  415. #endif
  416. #ifdef CONFIG_EVB64260
  417. void evb64260_init(void);
  418. void debug_led(int, int);
  419. void display_mem_map(void);
  420. void perform_soft_reset(void);
  421. #endif
  422. /* $(BOARD)/$(BOARD).c */
  423. int board_early_init_f (void);
  424. int board_late_init (void);
  425. int board_postclk_init (void); /* after clocks/timebase, before env/serial */
  426. int board_early_init_r (void);
  427. void board_poweroff (void);
  428. #if defined(CONFIG_SYS_DRAM_TEST)
  429. int testdram(void);
  430. #endif /* CONFIG_SYS_DRAM_TEST */
  431. /* $(CPU)/start.S */
  432. #if defined(CONFIG_5xx) || \
  433. defined(CONFIG_8xx)
  434. uint get_immr (uint);
  435. #endif
  436. uint get_pir (void);
  437. #if defined(CONFIG_MPC5xxx)
  438. uint get_svr (void);
  439. #endif
  440. uint get_pvr (void);
  441. uint get_svr (void);
  442. uint rd_ic_cst (void);
  443. void wr_ic_cst (uint);
  444. void wr_ic_adr (uint);
  445. uint rd_dc_cst (void);
  446. void wr_dc_cst (uint);
  447. void wr_dc_adr (uint);
  448. int icache_status (void);
  449. void icache_enable (void);
  450. void icache_disable(void);
  451. int dcache_status (void);
  452. void dcache_enable (void);
  453. void dcache_disable(void);
  454. void mmu_disable(void);
  455. void relocate_code (ulong, gd_t *, ulong) __attribute__ ((noreturn));
  456. ulong get_endaddr (void);
  457. void trap_init (ulong);
  458. #if defined (CONFIG_4xx) || \
  459. defined (CONFIG_MPC5xxx) || \
  460. defined (CONFIG_74xx_7xx) || \
  461. defined (CONFIG_74x) || \
  462. defined (CONFIG_75x) || \
  463. defined (CONFIG_74xx) || \
  464. defined (CONFIG_MPC8220) || \
  465. defined (CONFIG_MPC85xx) || \
  466. defined (CONFIG_MPC86xx) || \
  467. defined (CONFIG_MPC83xx)
  468. unsigned char in8(unsigned int);
  469. void out8(unsigned int, unsigned char);
  470. unsigned short in16(unsigned int);
  471. unsigned short in16r(unsigned int);
  472. void out16(unsigned int, unsigned short value);
  473. void out16r(unsigned int, unsigned short value);
  474. unsigned long in32(unsigned int);
  475. unsigned long in32r(unsigned int);
  476. void out32(unsigned int, unsigned long value);
  477. void out32r(unsigned int, unsigned long value);
  478. void ppcDcbf(unsigned long value);
  479. void ppcDcbi(unsigned long value);
  480. void ppcSync(void);
  481. void ppcDcbz(unsigned long value);
  482. #endif
  483. #if defined (CONFIG_MICROBLAZE)
  484. unsigned short in16(unsigned int);
  485. void out16(unsigned int, unsigned short value);
  486. #endif
  487. #if defined (CONFIG_MPC83xx)
  488. void ppcDWload(unsigned int *addr, unsigned int *ret);
  489. void ppcDWstore(unsigned int *addr, unsigned int *value);
  490. void disable_addr_trans(void);
  491. void enable_addr_trans(void);
  492. #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  493. void ddr_enable_ecc(unsigned int dram_size);
  494. #endif
  495. #endif
  496. /* $(CPU)/cpu.c */
  497. static inline int cpumask_next(int cpu, unsigned int mask)
  498. {
  499. for (cpu++; !((1 << cpu) & mask); cpu++)
  500. ;
  501. return cpu;
  502. }
  503. #define for_each_cpu(iter, cpu, num_cpus, mask) \
  504. for (iter = 0, cpu = cpumask_next(-1, mask); \
  505. iter < num_cpus; \
  506. iter++, cpu = cpumask_next(cpu, mask)) \
  507. int cpu_numcores (void);
  508. u32 cpu_mask (void);
  509. int is_core_valid (unsigned int);
  510. int probecpu (void);
  511. int checkcpu (void);
  512. int checkicache (void);
  513. int checkdcache (void);
  514. void upmconfig (unsigned int, unsigned int *, unsigned int);
  515. ulong get_tbclk (void);
  516. void reset_cpu (ulong addr);
  517. #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
  518. void ft_cpu_setup(void *blob, bd_t *bd);
  519. #ifdef CONFIG_PCI
  520. void ft_pci_setup(void *blob, bd_t *bd);
  521. #endif
  522. #endif
  523. /* $(CPU)/serial.c */
  524. int serial_init (void);
  525. void serial_setbrg (void);
  526. void serial_putc (const char);
  527. void serial_putc_raw(const char);
  528. void serial_puts (const char *);
  529. int serial_getc (void);
  530. int serial_tstc (void);
  531. void _serial_setbrg (const int);
  532. void _serial_putc (const char, const int);
  533. void _serial_putc_raw(const char, const int);
  534. void _serial_puts (const char *, const int);
  535. int _serial_getc (const int);
  536. int _serial_tstc (const int);
  537. /* $(CPU)/speed.c */
  538. int get_clocks (void);
  539. int get_clocks_866 (void);
  540. int sdram_adjust_866 (void);
  541. int adjust_sdram_tbs_8xx (void);
  542. #if defined(CONFIG_8260)
  543. int prt_8260_clks (void);
  544. #elif defined(CONFIG_MPC5xxx)
  545. int prt_mpc5xxx_clks (void);
  546. #endif
  547. #if defined(CONFIG_MPC512X)
  548. int prt_mpc512xxx_clks (void);
  549. #endif
  550. #if defined(CONFIG_MPC8220)
  551. int prt_mpc8220_clks (void);
  552. #endif
  553. #ifdef CONFIG_4xx
  554. ulong get_OPB_freq (void);
  555. ulong get_PCI_freq (void);
  556. #endif
  557. #if defined(CONFIG_S3C24X0) || \
  558. defined(CONFIG_LH7A40X) || \
  559. defined(CONFIG_S3C6400) || \
  560. defined(CONFIG_EP93XX)
  561. ulong get_FCLK (void);
  562. ulong get_HCLK (void);
  563. ulong get_PCLK (void);
  564. ulong get_UCLK (void);
  565. #endif
  566. #if defined(CONFIG_LH7A40X)
  567. ulong get_PLLCLK (void);
  568. #endif
  569. #if defined CONFIG_INCA_IP
  570. uint incaip_get_cpuclk (void);
  571. #endif
  572. #if defined(CONFIG_IMX)
  573. ulong get_systemPLLCLK(void);
  574. ulong get_FCLK(void);
  575. ulong get_HCLK(void);
  576. ulong get_BCLK(void);
  577. ulong get_PERCLK1(void);
  578. ulong get_PERCLK2(void);
  579. ulong get_PERCLK3(void);
  580. #endif
  581. ulong get_bus_freq (ulong);
  582. int get_serial_clock(void);
  583. #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
  584. ulong get_ddr_freq(ulong);
  585. #endif
  586. #if defined(CONFIG_MPC85xx)
  587. typedef MPC85xx_SYS_INFO sys_info_t;
  588. void get_sys_info ( sys_info_t * );
  589. #endif
  590. #if defined(CONFIG_MPC86xx)
  591. typedef MPC86xx_SYS_INFO sys_info_t;
  592. void get_sys_info ( sys_info_t * );
  593. static inline ulong get_ddr_freq(ulong dummy)
  594. {
  595. return get_bus_freq(dummy);
  596. }
  597. #endif
  598. #if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
  599. # if defined(CONFIG_440)
  600. # if defined(CONFIG_440SPE)
  601. unsigned long determine_sysper(void);
  602. unsigned long determine_pci_clock_per(void);
  603. # endif
  604. # endif
  605. typedef PPC4xx_SYS_INFO sys_info_t;
  606. int ppc440spe_revB(void);
  607. void get_sys_info ( sys_info_t * );
  608. #endif
  609. /* $(CPU)/cpu_init.c */
  610. #if defined(CONFIG_8xx) || defined(CONFIG_8260)
  611. void cpu_init_f (volatile immap_t *immr);
  612. #endif
  613. #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
  614. void cpu_init_f (void);
  615. #endif
  616. int cpu_init_r (void);
  617. #if defined(CONFIG_8260)
  618. int prt_8260_rsr (void);
  619. #elif defined(CONFIG_MPC83xx)
  620. int prt_83xx_rsr (void);
  621. #endif
  622. /* $(CPU)/interrupts.c */
  623. int interrupt_init (void);
  624. void timer_interrupt (struct pt_regs *);
  625. void external_interrupt (struct pt_regs *);
  626. void irq_install_handler(int, interrupt_handler_t *, void *);
  627. void irq_free_handler (int);
  628. void reset_timer (void);
  629. ulong get_timer (ulong base);
  630. void enable_interrupts (void);
  631. int disable_interrupts (void);
  632. /* $(CPU)/.../commproc.c */
  633. int dpram_init (void);
  634. uint dpram_base(void);
  635. uint dpram_base_align(uint align);
  636. uint dpram_alloc(uint size);
  637. uint dpram_alloc_align(uint size,uint align);
  638. void bootcount_store (ulong);
  639. ulong bootcount_load (void);
  640. #define BOOTCOUNT_MAGIC 0xB001C041
  641. /* $(CPU)/.../<eth> */
  642. void mii_init (void);
  643. /* $(CPU)/.../lcd.c */
  644. ulong lcd_setmem (ulong);
  645. /* $(CPU)/.../video.c */
  646. ulong video_setmem (ulong);
  647. /* arch/$(ARCH)/lib/cache.c */
  648. void enable_caches(void);
  649. void flush_cache (unsigned long, unsigned long);
  650. void flush_dcache_all(void);
  651. void flush_dcache_range(unsigned long start, unsigned long stop);
  652. void invalidate_dcache_range(unsigned long start, unsigned long stop);
  653. void invalidate_dcache_all(void);
  654. void invalidate_icache_all(void);
  655. /* arch/$(ARCH)/lib/ticks.S */
  656. unsigned long long get_ticks(void);
  657. void wait_ticks (unsigned long);
  658. /* arch/$(ARCH)/lib/time.c */
  659. void __udelay (unsigned long);
  660. ulong usec2ticks (unsigned long usec);
  661. ulong ticks2usec (unsigned long ticks);
  662. int init_timebase (void);
  663. /* lib/gunzip.c */
  664. int gunzip(void *, int, unsigned char *, unsigned long *);
  665. int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
  666. int stoponerr, int offset);
  667. /* lib/qsort.c */
  668. void qsort(void *base, size_t nmemb, size_t size,
  669. int(*compar)(const void *, const void *));
  670. int strcmp_compar(const void *, const void *);
  671. /* lib/time.c */
  672. void udelay (unsigned long);
  673. void mdelay(unsigned long);
  674. /* lib/uuid.c */
  675. void uuid_str_to_bin(const char *uuid, unsigned char *out);
  676. int uuid_str_valid(const char *uuid);
  677. /* lib/vsprintf.c */
  678. #include <vsprintf.h>
  679. /* lib/strmhz.c */
  680. char * strmhz(char *buf, unsigned long hz);
  681. /* lib/crc32.c */
  682. #include <u-boot/crc.h>
  683. /* lib/rand.c */
  684. #if defined(CONFIG_RANDOM_MACADDR) || \
  685. defined(CONFIG_BOOTP_RANDOM_DELAY) || \
  686. defined(CONFIG_CMD_LINK_LOCAL)
  687. #define RAND_MAX -1U
  688. void srand(unsigned int seed);
  689. unsigned int rand(void);
  690. unsigned int rand_r(unsigned int *seedp);
  691. #endif
  692. /* common/console.c */
  693. int console_init_f(void); /* Before relocation; uses the serial stuff */
  694. int console_init_r(void); /* After relocation; uses the console stuff */
  695. int console_assign(int file, const char *devname); /* Assign the console */
  696. int ctrlc (void);
  697. int had_ctrlc (void); /* have we had a Control-C since last clear? */
  698. void clear_ctrlc (void); /* clear the Control-C condition */
  699. int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
  700. /*
  701. * STDIO based functions (can always be used)
  702. */
  703. /* serial stuff */
  704. int serial_printf (const char *fmt, ...)
  705. __attribute__ ((format (__printf__, 1, 2)));
  706. /* stdin */
  707. int getc(void);
  708. int tstc(void);
  709. /* stdout */
  710. void putc(const char c);
  711. void puts(const char *s);
  712. int printf(const char *fmt, ...)
  713. __attribute__ ((format (__printf__, 1, 2)));
  714. int vprintf(const char *fmt, va_list args);
  715. /* stderr */
  716. #define eputc(c) fputc(stderr, c)
  717. #define eputs(s) fputs(stderr, s)
  718. #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
  719. /*
  720. * FILE based functions (can only be used AFTER relocation!)
  721. */
  722. #define stdin 0
  723. #define stdout 1
  724. #define stderr 2
  725. #define MAX_FILES 3
  726. int fprintf(int file, const char *fmt, ...)
  727. __attribute__ ((format (__printf__, 2, 3)));
  728. void fputs(int file, const char *s);
  729. void fputc(int file, const char c);
  730. int ftstc(int file);
  731. int fgetc(int file);
  732. /* lib/net_utils.c */
  733. #include <net.h>
  734. static inline IPaddr_t getenv_IPaddr(char *var)
  735. {
  736. return string_to_ip(getenv(var));
  737. }
  738. /*
  739. * CONSOLE multiplexing.
  740. */
  741. #ifdef CONFIG_CONSOLE_MUX
  742. #include <iomux.h>
  743. #endif
  744. int pcmcia_init (void);
  745. #ifdef CONFIG_STATUS_LED
  746. # include <status_led.h>
  747. #endif
  748. #include <bootstage.h>
  749. #ifdef CONFIG_SHOW_ACTIVITY
  750. void show_activity(int arg);
  751. #endif
  752. /* Multicore arch functions */
  753. #ifdef CONFIG_MP
  754. int cpu_status(int nr);
  755. int cpu_reset(int nr);
  756. int cpu_disable(int nr);
  757. int cpu_release(int nr, int argc, char * const argv[]);
  758. #endif
  759. #endif /* __ASSEMBLY__ */
  760. #ifdef CONFIG_PPC
  761. /*
  762. * Has to be included outside of the #ifndef __ASSEMBLY__ section.
  763. * Otherwise might lead to compilation errors in assembler files.
  764. */
  765. #include <asm/cache.h>
  766. #endif
  767. /* Put only stuff here that the assembler can digest */
  768. #ifdef CONFIG_POST
  769. #define CONFIG_HAS_POST
  770. #ifndef CONFIG_POST_ALT_LIST
  771. #define CONFIG_POST_STD_LIST
  772. #endif
  773. #endif
  774. #ifdef CONFIG_INIT_CRITICAL
  775. #error CONFIG_INIT_CRITICAL is deprecated!
  776. #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
  777. #endif
  778. #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
  779. #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
  780. #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
  781. #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
  782. #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
  783. #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
  784. #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
  785. /*
  786. * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
  787. * is used to align DMA buffers.
  788. */
  789. #ifndef __ASSEMBLY__
  790. #include <asm/cache.h>
  791. #endif
  792. /*
  793. * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
  794. * stack that meets the minimum architecture alignment requirements for DMA.
  795. * Such a buffer is useful for DMA operations where flushing and invalidating
  796. * the cache before and after a read and/or write operation is required for
  797. * correct operations.
  798. *
  799. * When called the macro creates an array on the stack that is sized such
  800. * that:
  801. *
  802. * 1) The beginning of the array can be advanced enough to be aligned.
  803. *
  804. * 2) The size of the aligned portion of the array is a multiple of the minimum
  805. * architecture alignment required for DMA.
  806. *
  807. * 3) The aligned portion contains enough space for the original number of
  808. * elements requested.
  809. *
  810. * The macro then creates a pointer to the aligned portion of this array and
  811. * assigns to the pointer the address of the first element in the aligned
  812. * portion of the array.
  813. *
  814. * Calling the macro as:
  815. *
  816. * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
  817. *
  818. * Will result in something similar to saying:
  819. *
  820. * uint32_t buffer[1024];
  821. *
  822. * The following differences exist:
  823. *
  824. * 1) The resulting buffer is guaranteed to be aligned to the value of
  825. * ARCH_DMA_MINALIGN.
  826. *
  827. * 2) The buffer variable created by the macro is a pointer to the specified
  828. * type, and NOT an array of the specified type. This can be very important
  829. * if you want the address of the buffer, which you probably do, to pass it
  830. * to the DMA hardware. The value of &buffer is different in the two cases.
  831. * In the macro case it will be the address of the pointer, not the address
  832. * of the space reserved for the buffer. However, in the second case it
  833. * would be the address of the buffer. So if you are replacing hard coded
  834. * stack buffers with this macro you need to make sure you remove the & from
  835. * the locations where you are taking the address of the buffer.
  836. *
  837. * Note that the size parameter is the number of array elements to allocate,
  838. * not the number of bytes.
  839. *
  840. * This macro can not be used outside of function scope, or for the creation
  841. * of a function scoped static buffer. It can not be used to create a cache
  842. * line aligned global buffer.
  843. */
  844. #define ALLOC_ALIGN_BUFFER(type, name, size, align) \
  845. char __##name[ROUND(size * sizeof(type), align) + (align - 1)]; \
  846. \
  847. type *name = (type *) ALIGN((uintptr_t)__##name, align)
  848. #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
  849. ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
  850. /*
  851. * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
  852. * purpose is to allow allocating aligned buffers outside of function scope.
  853. * Usage of this macro shall be avoided or used with extreme care!
  854. */
  855. #define DEFINE_ALIGN_BUFFER(type, name, size, align) \
  856. static char __##name[roundup(size * sizeof(type), align)] \
  857. __attribute__((aligned(align))); \
  858. \
  859. static type *name = (type *)__##name
  860. #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \
  861. DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
  862. /* Pull in stuff for the build system */
  863. #ifdef DO_DEPS_ONLY
  864. # include <environment.h>
  865. #endif
  866. #endif /* __COMMON_H_ */