uboot-vybrid_public/board/zylonite/nand.c

/*
 * (C) Copyright 2006 DENX Software Engineering
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>

#if defined(CONFIG_CMD_NAND)
#ifdef CONFIG_NEW_NAND_CODE

#include <nand.h>
#include <asm/arch/pxa-regs.h>

#ifdef CFG_DFC_DEBUG1
# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
#else
# define DFC_DEBUG1(fmt, args...)
#endif

#ifdef CFG_DFC_DEBUG2
# define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
#else
# define DFC_DEBUG2(fmt, args...)
#endif

#ifdef CFG_DFC_DEBUG3
# define DFC_DEBUG3(fmt, args...) printf(fmt, ##args)
#else
# define DFC_DEBUG3(fmt, args...)
#endif

#define MIN(x, y)		((x < y) ? x : y)

/* These really don't belong here, as they are specific to the NAND Model */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };

static struct nand_bbt_descr delta_bbt_descr = {
	.options = 0,
	.offs = 0,
	.len = 2,
	.pattern = scan_ff_pattern
};

static struct nand_oobinfo delta_oob = {
	.useecc = MTD_NANDECC_AUTOPL_USR, /* MTD_NANDECC_PLACEONLY, */
	.eccbytes = 6,
	.eccpos = {2, 3, 4, 5, 6, 7},
	.oobfree = { {8, 2}, {12, 4} }
};


/*
 * not required for Monahans DFC
 */
static void dfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
	return;
}

#if 0
/* read device ready pin */
static int dfc_device_ready(struct mtd_info *mtdinfo)
{
	if(NDSR & NDSR_RDY)
		return 1;
	else
		return 0;
	return 0;
}
#endif

/*
 * Write buf to the DFC Controller Data Buffer
 */
static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
	unsigned long bytes_multi = len & 0xfffffffc;
	unsigned long rest = len & 0x3;
	unsigned long *long_buf;
	int i;

	DFC_DEBUG2("dfc_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf));
	if(bytes_multi) {
		for(i=0; i<bytes_multi; i+=4) {
			long_buf = (unsigned long*) &buf[i];
			NDDB = *long_buf;
		}
	}
	if(rest) {
		printf("dfc_write_buf: ERROR, writing non 4-byte aligned data.\n");
	}
	return;
}


/* The original:
 * static void dfc_read_buf(struct mtd_info *mtd, const u_char *buf, int len)
 *
 * Shouldn't this be "u_char * const buf" ?
 */
static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
{
	int i=0, j;

	/* we have to be carefull not to overflow the buffer if len is
	 * not a multiple of 4 */
	unsigned long bytes_multi = len & 0xfffffffc;
	unsigned long rest = len & 0x3;
	unsigned long *long_buf;

	DFC_DEBUG3("dfc_read_buf: reading %d bytes.\n", len);
	/* if there are any, first copy multiple of 4 bytes */
	if(bytes_multi) {
		for(i=0; i<bytes_multi; i+=4) {
			long_buf = (unsigned long*) &buf[i];
			*long_buf = NDDB;
		}
	}

	/* ...then the rest */
	if(rest) {
		unsigned long rest_data = NDDB;
		for(j=0;j<rest; j++)
			buf[i+j] = (u_char) ((rest_data>>j) & 0xff);
	}

	return;
}

/*
 * read a word. Not implemented as not used in NAND code.
 */
static u16 dfc_read_word(struct mtd_info *mtd)
{
	printf("dfc_read_word: UNIMPLEMENTED.\n");
	return 0;
}

/* global var, too bad: mk@tbd: move to ->priv pointer */
static unsigned long read_buf = 0;
static int bytes_read = -1;

/*
 * read a byte from NDDB Because we can only read 4 bytes from NDDB at
 * a time, we buffer the remaining bytes. The buffer is reset when a
 * new command is sent to the chip.
 *
 * WARNING:
 * This function is currently only used to read status and id
 * bytes. For these commands always 8 bytes need to be read from
 * NDDB. So we read and discard these bytes right now. In case this
 * function is used for anything else in the future, we must check
 * what was the last command issued and read the appropriate amount of
 * bytes respectively.
 */
static u_char dfc_read_byte(struct mtd_info *mtd)
{
	unsigned char byte;
	unsigned long dummy;

	if(bytes_read < 0) {
		read_buf = NDDB;
		dummy = NDDB;
		bytes_read = 0;
	}
	byte = (unsigned char) (read_buf>>(8 * bytes_read++));
	if(bytes_read >= 4)
		bytes_read = -1;

	DFC_DEBUG2("dfc_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf);
	return byte;
}

/* calculate delta between OSCR values start and now  */
static unsigned long get_delta(unsigned long start)
{
	unsigned long cur = OSCR;

	if(cur < start) /* OSCR overflowed */
		return (cur + (start^0xffffffff));
	else
		return (cur - start);
}

/* delay function, this doesn't belong here */
static void wait_us(unsigned long us)
{
	unsigned long start = OSCR;
	us *= OSCR_CLK_FREQ;

	while (get_delta(start) < us) {
		/* do nothing */
	}
}

static void dfc_clear_nddb(void)
{
	NDCR &= ~NDCR_ND_RUN;
	wait_us(CFG_NAND_OTHER_TO);
}

/* wait_event with timeout */
static unsigned long dfc_wait_event(unsigned long event)
{
	unsigned long ndsr, timeout, start = OSCR;

	if(!event)
		return 0xff000000;
	else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
		timeout = CFG_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
	else
		timeout = CFG_NAND_OTHER_TO * OSCR_CLK_FREQ;

	while(1) {
		ndsr = NDSR;
		if(ndsr & event) {
			NDSR |= event;
			break;
		}
		if(get_delta(start) > timeout) {
			DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%lx.\n", event);
			return 0xff000000;
		}

	}
	return ndsr;
}

/* we don't always wan't to do this */
static void dfc_new_cmd(void)
{
	int retry = 0;
	unsigned long status;

	while(retry++ <= CFG_NAND_SENDCMD_RETRY) {
		/* Clear NDSR */
		NDSR = 0xFFF;

		/* set NDCR[NDRUN] */
		if(!(NDCR & NDCR_ND_RUN))
			NDCR |= NDCR_ND_RUN;

		status = dfc_wait_event(NDSR_WRCMDREQ);

		if(status & NDSR_WRCMDREQ)
			return;

		DFC_DEBUG2("dfc_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry);
		dfc_clear_nddb();
	}
	DFC_DEBUG1("dfc_new_cmd: giving up after %d retries.\n", retry);
}

/* this function is called after Programm and Erase Operations to
 * check for success or failure */
static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this)
{
	unsigned long ndsr=0, event=0;
	int state = this->state;

	if(state == FL_WRITING) {
		event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
	} else if(state == FL_ERASING) {
		event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
	}

	ndsr = dfc_wait_event(event);

	if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000))
		return(0x1); /* Status Read error */
	return 0;
}

/* cmdfunc send commands to the DFC */
static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command,
			int column, int page_addr)
{
	/* register struct nand_chip *this = mtd->priv; */
	unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0;

	/* clear the ugly byte read buffer */
	bytes_read = -1;
	read_buf = 0;

	switch (command) {
	case NAND_CMD_READ0:
		DFC_DEBUG3("dfc_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
		dfc_new_cmd();
		ndcb0 = (NAND_CMD_READ0 | (4<<16));
		column >>= 1; /* adjust for 16 bit bus */
		ndcb1 = (((column>>1) & 0xff) |
			 ((page_addr<<8) & 0xff00) |
			 ((page_addr<<8) & 0xff0000) |
			 ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
		event = NDSR_RDDREQ;
		goto write_cmd;
	case NAND_CMD_READ1:
		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READ1 unimplemented!\n");
		goto end;
	case NAND_CMD_READOOB:
		DFC_DEBUG1("dfc_cmdfunc: NAND_CMD_READOOB unimplemented!\n");
		goto end;
	case NAND_CMD_READID:
		dfc_new_cmd();
		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READID.\n");
		ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/
		event = NDSR_RDDREQ;
		goto write_cmd;
	case NAND_CMD_PAGEPROG:
		/* sent as a multicommand in NAND_CMD_SEQIN */
		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n");
		goto end;
	case NAND_CMD_ERASE1:
		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE1,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
		dfc_new_cmd();
		ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16));
		ndcb1 = (page_addr & 0x00ffffff);
		goto write_cmd;
	case NAND_CMD_ERASE2:
		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n");
		goto end;
	case NAND_CMD_SEQIN:
		/* send PAGE_PROG command(0x1080) */
		dfc_new_cmd();
		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
		ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16));
		column >>= 1; /* adjust for 16 bit bus */
		ndcb1 = (((column>>1) & 0xff) |
			 ((page_addr<<8) & 0xff00) |
			 ((page_addr<<8) & 0xff0000) |
			 ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
		event = NDSR_WRDREQ;
		goto write_cmd;
	case NAND_CMD_STATUS:
		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_STATUS.\n");
		dfc_new_cmd();
		ndcb0 = NAND_CMD_STATUS | (4<<21);
		event = NDSR_RDDREQ;
		goto write_cmd;
	case NAND_CMD_RESET:
		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_RESET.\n");
		ndcb0 = NAND_CMD_RESET | (5<<21);
		event = NDSR_CS0_CMDD;
		goto write_cmd;
	default:
		printk("dfc_cmdfunc: error, unsupported command.\n");
		goto end;
	}

 write_cmd:
	NDCB0 = ndcb0;
	NDCB0 = ndcb1;
	NDCB0 = ndcb2;

	/*  wait_event: */
	dfc_wait_event(event);
 end:
	return;
}

static void dfc_gpio_init(void)
{
	DFC_DEBUG2("Setting up DFC GPIO's.\n");

	/* no idea what is done here, see zylonite.c */
	GPIO4 = 0x1;

	DF_ALE_WE1 = 0x00000001;
	DF_ALE_WE2 = 0x00000001;
	DF_nCS0 = 0x00000001;
	DF_nCS1 = 0x00000001;
	DF_nWE = 0x00000001;
	DF_nRE = 0x00000001;
	DF_IO0 = 0x00000001;
	DF_IO8 = 0x00000001;
	DF_IO1 = 0x00000001;
	DF_IO9 = 0x00000001;
	DF_IO2 = 0x00000001;
	DF_IO10 = 0x00000001;
	DF_IO3 = 0x00000001;
	DF_IO11 = 0x00000001;
	DF_IO4 = 0x00000001;
	DF_IO12 = 0x00000001;
	DF_IO5 = 0x00000001;
	DF_IO13 = 0x00000001;
	DF_IO6 = 0x00000001;
	DF_IO14 = 0x00000001;
	DF_IO7 = 0x00000001;
	DF_IO15 = 0x00000001;

	DF_nWE = 0x1901;
	DF_nRE = 0x1901;
	DF_CLE_NOE = 0x1900;
	DF_ALE_WE1 = 0x1901;
	DF_INT_RnB = 0x1900;
}

/*
 * Board-specific NAND initialization. The following members of the
 * argument are board-specific (per include/linux/mtd/nand_new.h):
 * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
 * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
 * - cmd_ctrl: hardwarespecific function for accesing control-lines
 * - dev_ready: hardwarespecific function for  accesing device ready/busy line
 * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
 *   only be provided if a hardware ECC is available
 * - ecc.mode: mode of ecc, see defines
 * - chip_delay: chip dependent delay for transfering data from array to
 *   read regs (tR)
 * - options: various chip options. They can partly be set to inform
 *   nand_scan about special functionality. See the defines for further
 *   explanation
 * Members with a "?" were not set in the merged testing-NAND branch,
 * so they are not set here either.
 */
int board_nand_init(struct nand_chip *nand)
{
	unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR;

	/* set up GPIO Control Registers */
	dfc_gpio_init();

	/* turn on the NAND Controller Clock (104 MHz @ D0) */
	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);

#undef CFG_TIMING_TIGHT
#ifndef CFG_TIMING_TIGHT
	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
		  DFC_MAX_tCH);
	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
		  DFC_MAX_tCS);
	tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US) + 1),
		  DFC_MAX_tWH);
	tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US) + 1),
		  DFC_MAX_tWP);
	tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US) + 1),
		  DFC_MAX_tRH);
	tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US) + 1),
		  DFC_MAX_tRP);
	tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) + 1),
		 DFC_MAX_tR);
	tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) + 1),
		   DFC_MAX_tWHR);
	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) + 1),
		  DFC_MAX_tAR);
#else /* this is the tight timing */

	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US)),
		  DFC_MAX_tCH);
	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US)),
		  DFC_MAX_tCS);
	tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US)),
		  DFC_MAX_tWH);
	tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US)),
		  DFC_MAX_tWP);
	tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US)),
		  DFC_MAX_tRH);
	tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US)),
		  DFC_MAX_tRP);
	tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) - tCH - 2),
		 DFC_MAX_tR);
	tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) - tCH - 2),
		   DFC_MAX_tWHR);
	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
		  DFC_MAX_tAR);
#endif /* CFG_TIMING_TIGHT */


	DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);

	/* tRP value is split in the register */
	if(tRP & (1 << 4)) {
		tRP_high = 1;
		tRP &= ~(1 << 4);
	} else {
		tRP_high = 0;
	}

	NDTR0CS0 = (tCH << 19) |
		(tCS << 16) |
		(tWH << 11) |
		(tWP << 8) |
		(tRP_high << 6) |
		(tRH << 3) |
		(tRP << 0);

	NDTR1CS0 = (tR << 16) |
		(tWHR << 4) |
		(tAR << 0);

	/* If it doesn't work (unlikely) think about:
	 *  - ecc enable
	 *  - chip select don't care
	 *  - read id byte count
	 *
	 * Intentionally enabled by not setting bits:
	 *  - dma (DMA_EN)
	 *  - page size = 512
	 *  - cs don't care, see if we can enable later!
	 *  - row address start position (after second cycle)
	 *  - pages per block = 32
	 *  - ND_RDY : clears command buffer
	 */
	/* NDCR_NCSX |		/\* Chip select busy don't care *\/ */

	NDCR = (NDCR_SPARE_EN |		/* use the spare area */
		NDCR_DWIDTH_C |		/* 16bit DFC data bus width  */
		NDCR_DWIDTH_M |		/* 16 bit Flash device data bus width */
		(2 << 16) |		/* read id count = 7 ???? mk@tbd */
		NDCR_ND_ARB_EN |	/* enable bus arbiter */
		NDCR_RDYM |		/* flash device ready ir masked */
		NDCR_CS0_PAGEDM |	/* ND_nCSx page done ir masked */
		NDCR_CS1_PAGEDM |
		NDCR_CS0_CMDDM |	/* ND_CSx command done ir masked */
		NDCR_CS1_CMDDM |
		NDCR_CS0_BBDM |		/* ND_CSx bad block detect ir masked */
		NDCR_CS1_BBDM |
		NDCR_DBERRM |		/* double bit error ir masked */
		NDCR_SBERRM |		/* single bit error ir masked */
		NDCR_WRDREQM |		/* write data request ir masked */
		NDCR_RDDREQM |		/* read data request ir masked */
		NDCR_WRCMDREQM);	/* write command request ir masked */


	/* wait 10 us due to cmd buffer clear reset */
	/*	wait(10); */

	nand->cmd_ctrl = dfc_hwcontrol;
/*	nand->dev_ready = dfc_device_ready; */
	nand->ecc.mode = NAND_ECC_SOFT;
	nand->options = NAND_BUSWIDTH_16;
	nand->waitfunc = dfc_wait;
	nand->read_byte = dfc_read_byte;
	nand->read_word = dfc_read_word;
	nand->read_buf = dfc_read_buf;
	nand->write_buf = dfc_write_buf;

	nand->cmdfunc = dfc_cmdfunc;
//	nand->autooob = &delta_oob;
	nand->badblock_pattern = &delta_bbt_descr;
	return 0;
}

#else
 #error "U-Boot legacy NAND support not available for Monahans DFC."
#endif
#endif