123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743 |
- /*
- *==========================================================================
- *
- * xyzModem.c
- *
- * RedBoot stream handler for xyzModem protocol
- *
- *==========================================================================
- *####ECOSGPLCOPYRIGHTBEGIN####
- * -------------------------------------------
- * This file is part of eCos, the Embedded Configurable Operating System.
- * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
- * Copyright (C) 2002 Gary Thomas
- *
- * eCos is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 or (at your option) any later version.
- *
- * eCos is distributed in the hope that it will be useful, but WITHOUT ANY
- * WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with eCos; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * As a special exception, if other files instantiate templates or use macros
- * or inline functions from this file, or you compile this file and link it
- * with other works to produce a work based on this file, this file does not
- * by itself cause the resulting work to be covered by the GNU General Public
- * License. However the source code for this file must still be made available
- * in accordance with section (3) of the GNU General Public License.
- *
- * This exception does not invalidate any other reasons why a work based on
- * this file might be covered by the GNU General Public License.
- *
- * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
- * at http: *sources.redhat.com/ecos/ecos-license/
- * -------------------------------------------
- *####ECOSGPLCOPYRIGHTEND####
- *==========================================================================
- *#####DESCRIPTIONBEGIN####
- *
- * Author(s): gthomas
- * Contributors: gthomas, tsmith, Yoshinori Sato
- * Date: 2000-07-14
- * Purpose:
- * Description:
- *
- * This code is part of RedBoot (tm).
- *
- *####DESCRIPTIONEND####
- *
- *==========================================================================
- */
- #include <common.h>
- #include <xyzModem.h>
- #include <stdarg.h>
- #include <crc.h>
- /* Assumption - run xyzModem protocol over the console port */
- /* Values magic to the protocol */
- #define SOH 0x01
- #define STX 0x02
- #define EOT 0x04
- #define ACK 0x06
- #define BSP 0x08
- #define NAK 0x15
- #define CAN 0x18
- #define EOF 0x1A /* ^Z for DOS officionados */
- #define USE_YMODEM_LENGTH
- /* Data & state local to the protocol */
- static struct {
- #ifdef REDBOOT
- hal_virtual_comm_table_t* __chan;
- #else
- int *__chan;
- #endif
- unsigned char pkt[1024], *bufp;
- unsigned char blk,cblk,crc1,crc2;
- unsigned char next_blk; /* Expected block */
- int len, mode, total_retries;
- int total_SOH, total_STX, total_CAN;
- bool crc_mode, at_eof, tx_ack;
- #ifdef USE_YMODEM_LENGTH
- unsigned long file_length, read_length;
- #endif
- } xyz;
- #define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
- #define xyzModem_MAX_RETRIES 20
- #define xyzModem_MAX_RETRIES_WITH_CRC 10
- #define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */
- #ifndef REDBOOT /*SB */
- typedef int cyg_int32;
- int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) {
- #define DELAY 20
- unsigned long counter=0;
- while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT*1000/DELAY)) {
- udelay(DELAY);
- counter++;
- }
- if (tstc()) {
- *c=getc();
- return 1;
- }
- return 0;
- }
- void CYGACC_COMM_IF_PUTC(char x,char y) {
- putc(y);
- }
- /* Validate a hex character */
- __inline__ static bool
- _is_hex(char c)
- {
- return (((c >= '0') && (c <= '9')) ||
- ((c >= 'A') && (c <= 'F')) ||
- ((c >= 'a') && (c <= 'f')));
- }
- /* Convert a single hex nibble */
- __inline__ static int
- _from_hex(char c)
- {
- int ret = 0;
- if ((c >= '0') && (c <= '9')) {
- ret = (c - '0');
- } else if ((c >= 'a') && (c <= 'f')) {
- ret = (c - 'a' + 0x0a);
- } else if ((c >= 'A') && (c <= 'F')) {
- ret = (c - 'A' + 0x0A);
- }
- return ret;
- }
- /* Convert a character to lower case */
- __inline__ static char
- _tolower(char c)
- {
- if ((c >= 'A') && (c <= 'Z')) {
- c = (c - 'A') + 'a';
- }
- return c;
- }
- /* Parse (scan) a number */
- bool
- parse_num(char *s, unsigned long *val, char **es, char *delim)
- {
- bool first = true;
- int radix = 10;
- char c;
- unsigned long result = 0;
- int digit;
- while (*s == ' ') s++;
- while (*s) {
- if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) {
- radix = 16;
- s += 2;
- }
- first = false;
- c = *s++;
- if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) {
- /* Valid digit */
- #ifdef CYGPKG_HAL_MIPS
- /* FIXME: tx49 compiler generates 0x2539018 for MUL which */
- /* isn't any good. */
- if (16 == radix)
- result = result << 4;
- else
- result = 10 * result;
- result += digit;
- #else
- result = (result * radix) + digit;
- #endif
- } else {
- if (delim != (char *)0) {
- /* See if this character is one of the delimiters */
- char *dp = delim;
- while (*dp && (c != *dp)) dp++;
- if (*dp) break; /* Found a good delimiter */
- }
- return false; /* Malformatted number */
- }
- }
- *val = result;
- if (es != (char **)0) {
- *es = s;
- }
- return true;
- }
- #endif
- #define USE_SPRINTF
- #ifdef DEBUG
- #ifndef USE_SPRINTF
- /*
- * Note: this debug setup only works if the target platform has two serial ports
- * available so that the other one (currently only port 1) can be used for debug
- * messages.
- */
- static int
- zm_dprintf(char *fmt, ...)
- {
- int cur_console;
- va_list args;
- va_start(args, fmt);
- #ifdef REDBOOT
- cur_console = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
- #endif
- diag_vprintf(fmt, args);
- #ifdef REDBOOT
- CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
- #endif
- }
- static void
- zm_flush(void)
- {
- }
- #else
- /*
- * Note: this debug setup works by storing the strings in a fixed buffer
- */
- #define FINAL
- #ifdef FINAL
- static char *zm_out = (char *)0x00380000;
- static char *zm_out_start = (char *)0x00380000;
- #else
- static char zm_buf[8192];
- static char *zm_out=zm_buf;
- static char *zm_out_start = zm_buf;
- #endif
- static int
- zm_dprintf(char *fmt, ...)
- {
- int len;
- va_list args;
- va_start(args, fmt);
- len = diag_vsprintf(zm_out, fmt, args);
- zm_out += len;
- return len;
- }
- static void
- zm_flush(void)
- {
- char *p = zm_out_start;
- #ifdef REDBOOT
- while (*p) mon_write_char(*p++);
- #endif
- zm_out = zm_out_start;
- }
- #endif
- static void
- zm_dump_buf(void *buf, int len)
- {
- #ifdef REDBOOT
- diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
- #else
- #endif
- }
- static unsigned char zm_buf[2048];
- static unsigned char *zm_bp;
- static void
- zm_new(void)
- {
- zm_bp = zm_buf;
- }
- static void
- zm_save(unsigned char c)
- {
- *zm_bp++ = c;
- }
- static void
- zm_dump(int line)
- {
- zm_dprintf("Packet at line: %d\n", line);
- zm_dump_buf(zm_buf, zm_bp-zm_buf);
- }
- #define ZM_DEBUG(x) x
- #else
- #define ZM_DEBUG(x)
- #endif
- /* Wait for the line to go idle */
- static void
- xyzModem_flush(void)
- {
- int res;
- char c;
- while (true) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- if (!res) return;
- }
- }
- static int
- xyzModem_get_hdr(void)
- {
- char c;
- int res;
- bool hdr_found = false;
- int i, can_total, hdr_chars;
- unsigned short cksum;
- ZM_DEBUG(zm_new());
- /* Find the start of a header */
- can_total = 0;
- hdr_chars = 0;
- if (xyz.tx_ack) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- xyz.tx_ack = false;
- }
- while (!hdr_found) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- ZM_DEBUG(zm_save(c));
- if (res) {
- hdr_chars++;
- switch (c) {
- case SOH:
- xyz.total_SOH++;
- case STX:
- if (c == STX) xyz.total_STX++;
- hdr_found = true;
- break;
- case CAN:
- xyz.total_CAN++;
- ZM_DEBUG(zm_dump(__LINE__));
- if (++can_total == xyzModem_CAN_COUNT) {
- return xyzModem_cancel;
- } else {
- /* Wait for multiple CAN to avoid early quits */
- break;
- }
- case EOT:
- /* EOT only supported if no noise */
- if (hdr_chars == 1) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__));
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_eof;
- }
- default:
- /* Ignore, waiting for start of header */
- ;
- }
- } else {
- /* Data stream timed out */
- xyzModem_flush(); /* Toss any current input */
- ZM_DEBUG(zm_dump(__LINE__));
- CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
- return xyzModem_timeout;
- }
- }
- /* Header found, now read the data */
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.blk);
- ZM_DEBUG(zm_save(xyz.blk));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.cblk);
- ZM_DEBUG(zm_save(xyz.cblk));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- xyz.len = (c == SOH) ? 128 : 1024;
- xyz.bufp = xyz.pkt;
- for (i = 0; i < xyz.len; i++) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- ZM_DEBUG(zm_save(c));
- if (res) {
- xyz.pkt[i] = c;
- } else {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- }
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc1);
- ZM_DEBUG(zm_save(xyz.crc1));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- if (xyz.crc_mode) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc2);
- ZM_DEBUG(zm_save(xyz.crc2));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- }
- ZM_DEBUG(zm_dump(__LINE__));
- /* Validate the message */
- if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
- ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk)));
- ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
- xyzModem_flush();
- return xyzModem_frame;
- }
- /* Verify checksum/CRC */
- if (xyz.crc_mode) {
- cksum = cyg_crc16(xyz.pkt, xyz.len);
- if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
- ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n",
- xyz.crc1, xyz.crc2, cksum & 0xFFFF));
- return xyzModem_cksum;
- }
- } else {
- cksum = 0;
- for (i = 0; i < xyz.len; i++) {
- cksum += xyz.pkt[i];
- }
- if (xyz.crc1 != (cksum & 0xFF)) {
- ZM_DEBUG(zm_dprintf("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, cksum & 0xFF));
- return xyzModem_cksum;
- }
- }
- /* If we get here, the message passes [structural] muster */
- return 0;
- }
- int
- xyzModem_stream_open(connection_info_t *info, int *err)
- {
- int console_chan, stat=0;
- int retries = xyzModem_MAX_RETRIES;
- int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
- /* ZM_DEBUG(zm_out = zm_out_start); */
- #ifdef xyzModem_zmodem
- if (info->mode == xyzModem_zmodem) {
- *err = xyzModem_noZmodem;
- return -1;
- }
- #endif
- #ifdef REDBOOT
- /* Set up the I/O channel. Note: this allows for using a different port in the future */
- console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- if (info->chan >= 0) {
- CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
- } else {
- CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
- }
- xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();
- CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
- CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT);
- #else
- /* TODO: CHECK ! */
- int dummy;
- xyz.__chan=&dummy;
- #endif
- xyz.len = 0;
- xyz.crc_mode = true;
- xyz.at_eof = false;
- xyz.tx_ack = false;
- xyz.mode = info->mode;
- xyz.total_retries = 0;
- xyz.total_SOH = 0;
- xyz.total_STX = 0;
- xyz.total_CAN = 0;
- #ifdef USE_YMODEM_LENGTH
- xyz.read_length = 0;
- xyz.file_length = 0;
- #endif
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- if (xyz.mode == xyzModem_xmodem) {
- /* X-modem doesn't have an information header - exit here */
- xyz.next_blk = 1;
- return 0;
- }
- while (retries-- > 0) {
- stat = xyzModem_get_hdr();
- if (stat == 0) {
- /* Y-modem file information header */
- if (xyz.blk == 0) {
- #ifdef USE_YMODEM_LENGTH
- /* skip filename */
- while (*xyz.bufp++);
- /* get the length */
- parse_num(xyz.bufp, &xyz.file_length, NULL, " ");
- #endif
- /* The rest of the file name data block quietly discarded */
- xyz.tx_ack = true;
- }
- xyz.next_blk = 1;
- xyz.len = 0;
- return 0;
- } else
- if (stat == xyzModem_timeout) {
- if (--crc_retries <= 0) xyz.crc_mode = false;
- CYGACC_CALL_IF_DELAY_US(5*100000); /* Extra delay for startup */
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
- }
- if (stat == xyzModem_cancel) {
- break;
- }
- }
- *err = stat;
- ZM_DEBUG(zm_flush());
- return -1;
- }
- int
- xyzModem_stream_read(char *buf, int size, int *err)
- {
- int stat, total, len;
- int retries;
- total = 0;
- stat = xyzModem_cancel;
- /* Try and get 'size' bytes into the buffer */
- while (!xyz.at_eof && (size > 0)) {
- if (xyz.len == 0) {
- retries = xyzModem_MAX_RETRIES;
- while (retries-- > 0) {
- stat = xyzModem_get_hdr();
- if (stat == 0) {
- if (xyz.blk == xyz.next_blk) {
- xyz.tx_ack = true;
- ZM_DEBUG(zm_dprintf("ACK block %d (%d)\n", xyz.blk, __LINE__));
- xyz.next_blk = (xyz.next_blk + 1) & 0xFF;
- #if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
- if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) {
- #else
- if (1) {
- #endif
- /* Data blocks can be padded with ^Z (EOF) characters */
- /* This code tries to detect and remove them */
- if ((xyz.bufp[xyz.len-1] == EOF) &&
- (xyz.bufp[xyz.len-2] == EOF) &&
- (xyz.bufp[xyz.len-3] == EOF)) {
- while (xyz.len && (xyz.bufp[xyz.len-1] == EOF)) {
- xyz.len--;
- }
- }
- }
- #ifdef USE_YMODEM_LENGTH
- /*
- * See if accumulated length exceeds that of the file.
- * If so, reduce size (i.e., cut out pad bytes)
- * Only do this for Y-modem (and Z-modem should it ever
- * be supported since it can fall back to Y-modem mode).
- */
- if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) {
- xyz.read_length += xyz.len;
- if (xyz.read_length > xyz.file_length) {
- xyz.len -= (xyz.read_length - xyz.file_length);
- }
- }
- #endif
- break;
- } else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) {
- /* Just re-ACK this so sender will get on with it */
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- continue; /* Need new header */
- } else {
- stat = xyzModem_sequence;
- }
- }
- if (stat == xyzModem_cancel) {
- break;
- }
- if (stat == xyzModem_eof) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("ACK (%d)\n", __LINE__));
- if (xyz.mode == xyzModem_ymodem) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("Reading Final Header\n"));
- stat = xyzModem_get_hdr();
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__));
- }
- xyz.at_eof = true;
- break;
- }
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
- }
- if (stat < 0) {
- *err = stat;
- xyz.len = -1;
- return total;
- }
- }
- /* Don't "read" data from the EOF protocol package */
- if (!xyz.at_eof) {
- len = xyz.len;
- if (size < len) len = size;
- memcpy(buf, xyz.bufp, len);
- size -= len;
- buf += len;
- total += len;
- xyz.len -= len;
- xyz.bufp += len;
- }
- }
- return total;
- }
- void
- xyzModem_stream_close(int *err)
- {
- diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
- xyz.crc_mode ? "CRC" : "Cksum",
- xyz.total_SOH, xyz.total_STX, xyz.total_CAN,
- xyz.total_retries);
- ZM_DEBUG(zm_flush());
- }
- /* Need to be able to clean out the input buffer, so have to take the */
- /* getc */
- void xyzModem_stream_terminate(bool abort, int (*getc)(void))
- {
- int c;
- if (abort) {
- ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
- switch (xyz.mode) {
- case xyzModem_xmodem:
- case xyzModem_ymodem:
- /* The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal */
- /* number of Backspaces is a friendly way to get the other end to abort. */
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- /* Now consume the rest of what's waiting on the line. */
- ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
- xyzModem_flush();
- xyz.at_eof = true;
- break;
- #ifdef xyzModem_zmodem
- case xyzModem_zmodem:
- /* Might support it some day I suppose. */
- #endif
- break;
- }
- } else {
- ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
- /*
- * Consume any trailing crap left in the inbuffer from
- * previous recieved blocks. Since very few files are an exact multiple
- * of the transfer block size, there will almost always be some gunk here.
- * If we don't eat it now, RedBoot will think the user typed it.
- */
- ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
- while ((c = (*getc)()) > -1) ;
- ZM_DEBUG(zm_dprintf("\n"));
- /*
- * Make a small delay to give terminal programs like minicom
- * time to get control again after their file transfer program
- * exits.
- */
- CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
- }
- }
- char *
- xyzModem_error(int err)
- {
- switch (err) {
- case xyzModem_access:
- return "Can't access file";
- break;
- case xyzModem_noZmodem:
- return "Sorry, zModem not available yet";
- break;
- case xyzModem_timeout:
- return "Timed out";
- break;
- case xyzModem_eof:
- return "End of file";
- break;
- case xyzModem_cancel:
- return "Cancelled";
- break;
- case xyzModem_frame:
- return "Invalid framing";
- break;
- case xyzModem_cksum:
- return "CRC/checksum error";
- break;
- case xyzModem_sequence:
- return "Block sequence error";
- break;
- default:
- return "Unknown error";
- break;
- }
- }
- /*
- * RedBoot interface
- */
- #if 0 /* SB */
- GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
- xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
- RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
- RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
- #endif
|