Wolfgang Denk
64134f0112
Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
|
před 17 roky | |
|---|---|---|
| .. | ||
| Makefile | před 19 roky | |
| README | před 22 roky | |
| config.mk | před 22 roky | |
| ee_access.c | před 23 roky | |
| ee_access.h | před 23 roky | |
| ee_dev.h | před 23 roky | |
| flash.c | před 20 roky | |
| gth.c | před 20 roky | |
| pcmcia.c | před 18 roky | |
| u-boot.lds | před 17 roky | |
README
Written by Thomas.Lange@corelatus.com 010805
To make a system for gth that actually works ;-)
the variable TBASE needs to be set to 0,1 or 2
depending on location where image is supposed to
be started from.
E.g. make TBASE=1
0: Start from RAM, base 0
1: Start from flash_base + 0x10070
2: Start from flash_base + 0x30070
When using 1 or 2, the image is supposed to be launched
from miniboot that boots the first U-Boot image found in
flash.
For miniboot code, description, see www.opensource.se
To make a system for gth that actually works ;-)
the variable TBASE needs to be set to 0,1 or 2
depending on location where image is supposed to
be started from.
E.g. make TBASE=1
0: Start from RAM, base 0
1: Start from flash_base + 0x10070
2: Start from flash_base + 0x30070
When using 1 or 2, the image is supposed to be launched
from miniboot that boots the first U-Boot image found in
flash.
For miniboot code, description, see www.opensource.se