123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657 |
- /*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * hardware register definitions for the AcTux-1 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- #ifndef _ACTUX1_HW_H
- #define _ACTUX1_HW_H
- /* 0 = LED off,1 = green, 2 = red, 3 = orange */
- #define ACTUX1_LED1(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0)
- #define ACTUX1_LED2(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1)
- #define ACTUX1_LED3(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2)
- #define ACTUX1_LED4(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 3)
- #define ACTUX1_LED5(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 4)
- #define ACTUX1_LED6(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 5)
- #define ACTUX1_LED7(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 6)
- #define ACTUX1_HS(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7)
- #define ACTUX1_HS_DCD 0x01
- #define ACTUX1_HS_DSR 0x02
- #define ACTUX1_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS
- #define ACTUX1_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)
- /* GPIO settings */
- #define CONFIG_SYS_GPIO_PCI1_INTA 2
- #define CONFIG_SYS_GPIO_PCI2_INTA 3
- #define CONFIG_SYS_GPIO_I2C_SDA 4
- #define CONFIG_SYS_GPIO_I2C_SCL 5
- #define CONFIG_SYS_GPIO_DBGJUMPER 9
- #define CONFIG_SYS_GPIO_BUTTON1 10
- #define CONFIG_SYS_GPIO_DBGSENSE 11
- #define CONFIG_SYS_GPIO_DTR 12
- #define CONFIG_SYS_GPIO_IORST 13 /* Out */
- #define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */
- #define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */
- #endif
|