xpedite517x.c 2.5 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091
  1. /*
  2. * Copyright 2009 Extreme Engineering Solutions, Inc.
  3. *
  4. * See file CREDITS for list of people who contributed to this
  5. * project.
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License as
  9. * published by the Free Software Foundation; either version 2 of
  10. * the License, or (at your option) any later version.
  11. *
  12. * This program is distributed in the hope that it will be useful,
  13. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15. * GNU General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU General Public License
  18. * along with this program; if not, write to the Free Software
  19. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20. * MA 02111-1307 USA
  21. */
  22. #include <common.h>
  23. #include <asm/processor.h>
  24. #include <asm/mmu.h>
  25. #include <asm/io.h>
  26. #include <fdt_support.h>
  27. #include <pca953x.h>
  28. #include "../common/fsl_8xxx_misc.h"
  29. #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI)
  30. extern void ft_board_pci_setup(void *blob, bd_t *bd);
  31. #endif
  32. /*
  33. * Print out which flash was booted from and if booting from the 2nd flash,
  34. * swap flash chip selects to maintain consistent flash numbering/addresses.
  35. */
  36. static void flash_cs_fixup(void)
  37. {
  38. int flash_sel;
  39. /*
  40. * Print boot dev and swap flash flash chip selects if booted from 2nd
  41. * flash. Swapping chip selects presents user with a common memory
  42. * map regardless of which flash was booted from.
  43. */
  44. flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
  45. CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS));
  46. printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
  47. if (flash_sel) {
  48. set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
  49. set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
  50. set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
  51. set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
  52. }
  53. }
  54. int board_early_init_r(void)
  55. {
  56. /* Initialize PCA9557 devices */
  57. pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
  58. pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
  59. pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0);
  60. pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0);
  61. flash_cs_fixup();
  62. return 0;
  63. }
  64. #if defined(CONFIG_OF_BOARD_SETUP)
  65. void ft_board_setup(void *blob, bd_t *bd)
  66. {
  67. #ifdef CONFIG_PCI
  68. ft_board_pci_setup(blob, bd);
  69. #endif
  70. ft_cpu_setup(blob, bd);
  71. }
  72. #endif
  73. #ifdef CONFIG_MP
  74. extern void cpu_mp_lmb_reserve(struct lmb *lmb);
  75. void board_lmb_reserve(struct lmb *lmb)
  76. {
  77. cpu_mp_lmb_reserve(lmb);
  78. }
  79. #endif