uboot-vybrid_public/include/asm-arm/arch-pxa/pxa-regs.h

/*
 *  linux/include/asm-arm/arch-pxa/pxa-regs.h
 *
 *  Author:	Nicolas Pitre
 *  Created:	Jun 15, 2001
 *  Copyright:	MontaVista Software Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de
 *   Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions.
 *   Added include for hardware.h (for __REG definition)
 */
#ifndef _PXA_REGS_H_
#define _PXA_REGS_H_

#include "bitfield.h"
#include "hardware.h"

/* FIXME hack so that SA-1111.h will work [cb] */

#ifndef __ASSEMBLY__
typedef unsigned short	Word16 ;
typedef unsigned int	Word32 ;
typedef Word32		Word ;
typedef Word		Quad [4] ;
typedef void		*Address ;
typedef void		(*ExcpHndlr) (void) ;
#endif

/*
 * PXA Chip selects
 */
#ifdef CONFIG_CPU_MONAHANS
#define PXA_CS0_PHYS   0x00000000 /* for both small and large same start */
#define PXA_CS1_PHYS   0x04000000 /* Small partition start address (64MB) */
#define PXA_CS1_LPHYS  0x30000000 /* Large partition start address (256MB) */
#define PXA_CS2_PHYS   0x10000000 /* (64MB) */
#define PXA_CS3_PHYS   0x14000000 /* (64MB) */
#define PXA_PCMCIA_PHYS        0x20000000 /* (256MB) */
#else
#define PXA_CS0_PHYS	0x00000000
#define PXA_CS1_PHYS	0x04000000
#define PXA_CS2_PHYS	0x08000000
#define PXA_CS3_PHYS	0x0C000000
#define PXA_CS4_PHYS	0x10000000
#define PXA_CS5_PHYS	0x14000000
#endif /* CONFIG_CPU_MONAHANS */

/*
 * Personal Computer Memory Card International Association (PCMCIA) sockets
 */
#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
#define PCMCIASp	(4*PCMCIAPrtSp) /* PCMCIA Space [byte]		   */
#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]	   */
#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]	   */

#ifndef CONFIG_CPU_MONAHANS             /* Monahans supports only one slot */
#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]	   */
#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]	   */
#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]	   */
#endif

#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]	   */
#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]	   */
#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]	   */

#define _PCMCIA(Nb)			/* PCMCIA [0..1]		   */ \
			(0x20000000 + (Nb)*PCMCIASp)
#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]		   */
#define _PCMCIAAttr(Nb)			/* PCMCIA Attribute [0..1]	   */ \
			(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
#define _PCMCIAMem(Nb)			/* PCMCIA Memory [0..1]		   */ \
			(_PCMCIA (Nb) + 3*PCMCIAPrtSp)

#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0			   */
#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O			   */
#define _PCMCIA0Attr	_PCMCIAAttr (0) /* PCMCIA 0 Attribute		   */
#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory		   */

#ifndef CONFIG_CPU_MONAHANS             /* Monahans supports only one slot */
#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1			   */
#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O			   */
#define _PCMCIA1Attr	_PCMCIAAttr (1) /* PCMCIA 1 Attribute		   */
#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory		   */
#endif

/*
 * DMA Controller
 */
#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
#ifdef CONFIG_CPU_MONAHANS
#define DCSR16		__REG(0x40000040)  /* DMA Control / Status Register for Channel 16 */
#define DCSR17		__REG(0x40000044)  /* DMA Control / Status Register for Channel 17 */
#define DCSR18		__REG(0x40000048)  /* DMA Control / Status Register for Channel 18 */
#define DCSR19		__REG(0x4000004c)  /* DMA Control / Status Register for Channel 19 */
#define DCSR20		__REG(0x40000050)  /* DMA Control / Status Register for Channel 20 */
#define DCSR21		__REG(0x40000054)  /* DMA Control / Status Register for Channel 21 */
#define DCSR22		__REG(0x40000058)  /* DMA Control / Status Register for Channel 22 */
#define DCSR23		__REG(0x4000005c)  /* DMA Control / Status Register for Channel 23 */
#define DCSR24		__REG(0x40000060)  /* DMA Control / Status Register for Channel 24 */
#define DCSR25		__REG(0x40000064)  /* DMA Control / Status Register for Channel 25 */
#define DCSR26		__REG(0x40000068)  /* DMA Control / Status Register for Channel 26 */
#define DCSR27		__REG(0x4000006c)  /* DMA Control / Status Register for Channel 27 */
#define DCSR28		__REG(0x40000070)  /* DMA Control / Status Register for Channel 28 */
#define DCSR29		__REG(0x40000074)  /* DMA Control / Status Register for Channel 29 */
#define DCSR30		__REG(0x40000078)  /* DMA Control / Status Register for Channel 30 */
#define DCSR31		__REG(0x4000007c)  /* DMA Control / Status Register for Channel 31 */
#endif /* CONFIG_CPU_MONAHANS */

#define DCSR(x)		__REG2(0x40000000, (x) << 2)

#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */

#if defined(CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS)
#define DCSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
#define DCSR_SETCMPST	(1 << 25)	/* Set Descriptor Compare Status */
#define DCSR_CLRCMPST	(1 << 24)	/* Clear Descriptor Compare Status */
#define DCSR_CMPST	(1 << 10)	/* The Descriptor Compare Status */
#define DCSR_ENRINTR	(1 << 9)	/* The end of Receive */
#endif

#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */

#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */

#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
#define DRCMR15		__REG(0x4000013c)  /* Reserved */
#define DRCMR16		__REG(0x40000140)  /* Reserved */
#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
#define DRCMR23		__REG(0x4000015c)  /* Reserved */
#define DRCMR24		__REG(0x40000160)  /* Reserved */
#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
#define DRCMR29		__REG(0x40000174)  /* Reserved */
#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
#define DRCMR34		__REG(0x40000188)  /* Reserved */
#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
#define DRCMR39		__REG(0x4000019C)  /* Reserved */

#define DRCMR68		       __REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
#define DRCMR69		       __REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
#define DRCMR70		       __REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */

#define DRCMRRXSADR	DRCMR2
#define DRCMRTXSADR	DRCMR3
#define DRCMRRXBTRBR	DRCMR4
#define DRCMRTXBTTHR	DRCMR5
#define DRCMRRXFFRBR	DRCMR6
#define DRCMRTXFFTHR	DRCMR7
#define DRCMRRXMCDR	DRCMR8
#define DRCMRRXMODR	DRCMR9
#define DRCMRTXMODR	DRCMR10
#define DRCMRRXPCDR	DRCMR11
#define DRCMRTXPCDR	DRCMR12
#define DRCMRRXSSDR	DRCMR13
#define DRCMRTXSSDR	DRCMR14
#define DRCMRRXICDR	DRCMR17
#define DRCMRTXICDR	DRCMR18
#define DRCMRRXSTRBR	DRCMR19
#define DRCMRTXSTTHR	DRCMR20
#define DRCMRRXMMC	DRCMR21
#define DRCMRTXMMC	DRCMR22

#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
#define DRCMR_CHLNUM	0x0f		/* mask for Channel Number (read / write) */

#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */

#define DDADR(x)	__REG2(0x40000200, (x) << 4)
#define DSADR(x)	__REG2(0x40000204, (x) << 4)
#define DTADR(x)	__REG2(0x40000208, (x) << 4)
#define DCMD(x)		__REG2(0x4000020c, (x) << 4)

#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */

#define DCMD_INCSRCADDR (1 << 31)	/* Source Address Increment Setting. */
#define DCMD_INCTRGADDR (1 << 30)	/* Target Address Increment Setting. */
#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
#define DCMD_STARTIRQEN (1 << 22)	/* Start Interrupt Enable */
#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */

/* default combinations */
#define DCMD_RXPCDR	(DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_RXMCDR	(DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_TXPCDR	(DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)

/*
 * UARTs
 */
/* Full Function UART (FFUART) */
#define FFUART		FFRBR
#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Bluetooth UART (BTUART) */
#define BTUART		BTRBR
#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Standard UART (STUART) */
#define STUART		STRBR
#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
#define STMSR		__REG(0x40700018)  /* Reserved */
#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
#define IER_UUE		(1 << 6)	/* UART Unit Enable */
#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */

#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
#define IIR_TOD		(1 << 3)	/* Time Out Detected */
#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */

#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
#define FCR_ITL_1	(0)
#define FCR_ITL_8	(FCR_ITL1)
#define FCR_ITL_16	(FCR_ITL2)
#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)

#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
#define LCR_SB		(1 << 6)	/* Set Break */
#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
#define LCR_EPS		(1 << 4)	/* Even Parity Select */
#define LCR_PEN		(1 << 3)	/* Parity Enable */
#define LCR_STB		(1 << 2)	/* Stop Bit */
#define LCR_WLS1	(1 << 1)	/* Word Length Select */
#define LCR_WLS0	(1 << 0)	/* Word Length Select */

#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
#define LSR_BI		(1 << 4)	/* Break Interrupt */
#define LSR_FE		(1 << 3)	/* Framing Error */
#define LSR_PE		(1 << 2)	/* Parity Error */
#define LSR_OE		(1 << 1)	/* Overrun Error */
#define LSR_DR		(1 << 0)	/* Data Ready */

#define MCR_LOOP	(1 << 4)	*/
#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
#define MCR_RTS		(1 << 1)	/* Request to Send */
#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */

#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
#define MSR_RI		(1 << 6)	/* Ring Indicator */
#define MSR_DSR		(1 << 5)	/* Data Set Ready */
#define MSR_CTS		(1 << 4)	/* Clear To Send */
#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */

/*
 * IrSR (Infrared Selection Register)
 */
#define IrSR_OFFSET 0x20

#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0
#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
#define IrSR_TXPL_POS_IS_ZERO 0x0
#define IrSR_XMODE_PULSE_1_6  (1<<2)
#define IrSR_XMODE_PULSE_3_16 0x0
#define IrSR_RCVEIR_IR_MODE   (1<<1)
#define IrSR_RCVEIR_UART_MODE 0x0
#define IrSR_XMITIR_IR_MODE   (1<<0)
#define IrSR_XMITIR_UART_MODE 0x0

#define IrSR_IR_RECEIVE_ON (\
		IrSR_RXPL_NEG_IS_ZERO | \
		IrSR_TXPL_POS_IS_ZERO | \
		IrSR_XMODE_PULSE_3_16 | \
		IrSR_RCVEIR_IR_MODE   | \
		IrSR_XMITIR_UART_MODE)

#define IrSR_IR_TRANSMIT_ON (\
		IrSR_RXPL_NEG_IS_ZERO | \
		IrSR_TXPL_POS_IS_ZERO | \
		IrSR_XMODE_PULSE_3_16 | \
		IrSR_RCVEIR_UART_MODE | \
		IrSR_XMITIR_IR_MODE)

/*
 * I2C registers
 */
#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */

#define PWRIBMR		__REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
#define PWRIDBR		__REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
#define PWRICR		__REG(0x40f00190)  /* Power I2C Control Register - ICR */
#define PWRISR		__REG(0x40f00198)  /* Power I2C Status Register - ISR */
#define PWRISAR		__REG(0x40f001A0)  /* Power I2C Slave Address Register-ISAR */

/* ----- Control register bits ---------------------------------------- */

#define ICR_START	0x1		/* start bit */
#define ICR_STOP	0x2		/* stop bit */
#define ICR_ACKNAK	0x4		/* send ACK(0) or NAK(1) */
#define ICR_TB		0x8		/* transfer byte bit */
#define ICR_MA		0x10		/* master abort */
#define ICR_SCLE	0x20		/* master clock enable, mona SCLEA */
#define ICR_IUE		0x40		/* unit enable */
#define ICR_GCD		0x80		/* general call disable */
#define ICR_ITEIE	0x100		/* enable tx interrupts */
#define ICR_IRFIE	0x200		/* enable rx interrupts, mona: DRFIE */
#define ICR_BEIE	0x400		/* enable bus error ints */
#define ICR_SSDIE	0x800		/* slave STOP detected int enable */
#define ICR_ALDIE	0x1000		/* enable arbitration interrupt */
#define ICR_SADIE	0x2000		/* slave address detected int enable */
#define ICR_UR		0x4000		/* unit reset */
#define ICR_FM		0x8000		/* Fast Mode */

/* ----- Status register bits ----------------------------------------- */

#define ISR_RWM		0x1		/* read/write mode */
#define ISR_ACKNAK	0x2		/* ack/nak status */
#define ISR_UB		0x4		/* unit busy */
#define ISR_IBB		0x8		/* bus busy */
#define ISR_SSD		0x10		/* slave stop detected */
#define ISR_ALD		0x20		/* arbitration loss detected */
#define ISR_ITE		0x40		/* tx buffer empty */
#define ISR_IRF		0x80		/* rx buffer full */
#define ISR_GCAD	0x100		/* general call address detected */
#define ISR_SAD		0x200		/* slave address detected */
#define ISR_BED		0x400		/* bus error no ACK/NAK */

/*
 * Serial Audio Controller
 */
/* FIXME the audio defines collide w/ the SA1111 defines.  I don't like these
 * short defines because there is too much chance of namespace collision
 */
/*#define SACR0		__REG(0x40400000)  /  Global Control Register */
/*#define SACR1		__REG(0x40400004)  /  Serial Audio I 2 S/MSB-Justified Control Register */
/*#define SASR0		__REG(0x4040000C)  /  Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
/*#define SAIMR		__REG(0x40400014)  /  Serial Audio Interrupt Mask Register */
/*#define SAICR		__REG(0x40400018)  /  Serial Audio Interrupt Clear Register */
/*#define SADIV		__REG(0x40400060)  /  Audio Clock Divider Register. */
/*#define SADR		__REG(0x40400080)  /  Serial Audio Data Register (TX and RX FIFO access Register). */


/*
 * AC97 Controller registers
 */
#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */

#define PICR		__REG(0x40500004)  /* PCM In Control Register */
#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */

#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */

#define GCR		__REG(0x4050000C)  /* Global Control Register */
#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */

#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
#define POSR_FIFOE	(1 << 4)	/* FIFO error */

#define PISR		__REG(0x40500014)  /* PCM In Status Register */
#define PISR_FIFOE	(1 << 4)	/* FIFO error */

#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
#define MCSR_FIFOE	(1 << 4)	/* FIFO error */

#define GSR		__REG(0x4050001C)  /* Global Status Register */
#define GSR_CDONE	(1 << 19)	/* Command Done */
#define GSR_SDONE	(1 << 18)	/* Status Done */
#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
#define GSR_MINT	(1 << 7)	/* Mic In Interrupt */
#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */

#define CAR		__REG(0x40500020)  /* CODEC Access Register */
#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */

#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */

#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
#define MOCR_FEIE	(1 << 3)	/* FIFO Error */

#define MICR		__REG(0x40500108)  /* Modem In Control Register */
#define MICR_FEIE	(1 << 3)	/* FIFO Error */

#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
#define MOSR_FIFOE	(1 << 4)	/* FIFO error */

#define MISR		__REG(0x40500118)  /* Modem In Status Register */
#define MISR_FIFOE	(1 << 4)	/* FIFO error */

#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */

#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */


/*
 * USB Device Controller
 */
#ifdef CONFIG_PXA27X

#define UDCCR		__REG(0x40600000)	/* UDC Control Register */
#define UDCCR_UDE	(1 << 0)		/* UDC enable */
#define UDCCR_UDA	(1 << 1)		/* UDC active */
#define UDCCR_RSM	(1 << 2)		/* Device resume */
#define UDCCR_EMCE	(1 << 3)		/* Endpoint Memory Configuration Error */
#define UDCCR_SMAC	(1 << 4)		/* Switch Endpoint Memory to Active Configuration */
#define UDCCR_RESIR	(1 << 29)		/* Resume interrupt request */
#define UDCCR_SUSIR	(1 << 28)		/* Suspend interrupt request */
#define UDCCR_SM	(1 << 28)		/* Suspend interrupt mask */
#define UDCCR_RSTIR	(1 << 27)		/* Reset interrupt request */
#define UDCCR_REM	(1 << 27)		/* Reset interrupt mask */
#define UDCCR_RM	(1 << 29)		/* resume interrupt mask */
#define UDCCR_SRM	(UDCCR_SM|UDCCR_RM)
#define UDCCR_OEN	(1 << 31)		/* On-the-Go Enable */
#define UDCCR_AALTHNP	(1 << 30)		/* A-device Alternate Host Negotiation Protocol Port Support */
#define UDCCR_AHNP	(1 << 29)		/* A-device Host Negotiation Protocol Support */
#define UDCCR_BHNP	(1 << 28)		/* B-device Host Negotiation Protocol Enable */
#define UDCCR_DWRE	(1 << 16)		/* Device Remote Wake-up Enable */
#define UDCCR_ACN	(0x03 << 11)		/* Active UDC configuration Number */
#define UDCCR_ACN_S	11
#define UDCCR_AIN	(0x07 << 8)		/* Active UDC interface Number */
#define UDCCR_AIN_S	8
#define UDCCR_AAISN	(0x07 << 5)		/* Active UDC Alternate Interface  Setting Number */
#define UDCCR_AAISN_S	5

#define UDCCS0		__REG(0x40600100)	/* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR	(1 << 0)		/* OUT packet ready */
#define UDCCS0_IPR	(1 << 1)		/* IN packet ready */
#define UDCCS0_FTF	(1 << 2)		/* Flush Tx FIFO */
#define UDCCS0_DRWF	(1 << 16)		/* Device remote wakeup feature */
#define UDCCS0_SST	(1 << 4)		/* Sent stall */
#define UDCCS0_FST	(1 << 5)		/* Force stall */
#define UDCCS0_RNE	(1 << 6)		/* Receive FIFO no empty */
#define UDCCS0_SA	(1 << 7)		/* Setup active */

/* Bulk IN - Endpoint 1,6,11 */
#define UDCCS1		__REG(0x40600104)  /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */

#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
#define UDCCS_BI_FTF	(1 << 8)	/* Flush Tx FIFO */
#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */

/* Bulk OUT - Endpoint 2,7,12 */
#define UDCCS2		__REG(0x40600108)  /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */

#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */

/* Isochronous IN - Endpoint 3,8,13 */
#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */

#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */

/* Isochronous OUT - Endpoint 4,9,14 */
#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */

#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */

/* Interrupt IN - Endpoint 5,10,15 */
#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */

#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */

#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
#define UFNRL		__REG(0x40600014)  /* UDC Frame Number Register Low */
#define UBCR2		__REG(0x40600208)  /* UDC Byte Count Reg 2 */
#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
#define UDDR0		__REG(0x40600300)  /* UDC Endpoint 0 Data Register */
#define UDDR1		__REG(0x40600304)  /* UDC Endpoint 1 Data Register */
#define UDDR2		__REG(0x40600308)  /* UDC Endpoint 2 Data Register */
#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */

#define UICR0		__REG(0x40600004)  /* UDC Interrupt Control Register 0 */

#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */

#define UICR1		__REG(0x40600008)  /* UDC Interrupt Control Register 1 */

#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */

#define USIR0		__REG(0x4060000C)  /* UDC Status Interrupt Register 0 */

#define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
#define USIR0_IR1	(1 << 2)	/* Interrup request ep 1 */
#define USIR0_IR2	(1 << 4)	/* Interrup request ep 2 */
#define USIR0_IR3	(1 << 3)	/* Interrup request ep 3 */
#define USIR0_IR4	(1 << 4)	/* Interrup request ep 4 */
#define USIR0_IR5	(1 << 5)	/* Interrup request ep 5 */
#define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
#define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */

#define USIR1		__REG(0x40600010)  /* UDC Status Interrupt Register 1 */

#define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
#define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
#define USIR1_IR10	(1 << 2)	/* Interrup request ep 10 */
#define USIR1_IR11	(1 << 3)	/* Interrup request ep 11 */
#define USIR1_IR12	(1 << 4)	/* Interrup request ep 12 */
#define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
#define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
#define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */


#define UDCICR0         __REG(0x40600004)	/* UDC Interrupt Control Register0 */
#define UDCICR1         __REG(0x40600008)	/* UDC Interrupt Control Register1 */
#define UDCICR_FIFOERR	(1 << 1)			/* FIFO Error interrupt for EP */
#define UDCICR_PKTCOMPL (1 << 0)			/* Packet Complete interrupt for EP */

#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */

#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCISR1_IRCC	(1 << 31)	/* IntEn - Configuration Change */
#define UDCISR1_IRSOF	(1 << 30)	/* IntEn - Start of Frame */
#define UDCISR1_IRRU	(1 << 29)	/* IntEn - Resume */
#define UDCISR1_IRSU	(1 << 28)	/* IntEn - Suspend */
#define UDCISR1_IRRS	(1 << 27)	/* IntEn - Reset */


#define UDCFNR			__REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR		__REG(0x40600018) /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF		(1 << 24)	/* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR		(1 << 17)	/* Extra Transciever Interrupt Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF		(1 << 16)	/* Extra Transciever Interrupt Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R	(1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */
#define UDCOTGICR_IEVV40F	(1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV44R	(1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge  Interrupt Enable */
#define UDCOTGICR_IEVV44F	(1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge Interrupt Enable */
#define UDCOTGICR_IESVR		(1 << 5)	/* OTG Session Valid Rising Edge Interrupt Enable */
#define UDCOTGICR_IESVF		(1 << 4)	/* OTG Session Valid Falling Edge Interrupt Enable */
#define UDCOTGICR_IESDR		(1 << 3)	/* OTG A-Device SRP Detect Rising Edge Interrupt Enable */
#define UDCOTGICR_IESDF		(1 << 2)	/* OTG A-Device SRP Detect Falling  Edge Interrupt Enable */
#define UDCOTGICR_IEIDR		(1 << 1)	/* OTG ID Change Rising Edge Interrupt Enable */
#define UDCOTGICR_IEIDF		(1 << 0)	/* OTG ID Change Falling Edge Interrupt Enable */

#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
#define UDCCSR0		__REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */

#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */

#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */

#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
#define UDCCSR_FST	(1 << 5)	/* Force STALL */
#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */

#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */

#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */

#define UDCCN(x)	__REG2(0x40600400, (x)<<2)
#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */

#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
#define UDCCONR_CN_S	(25)
#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
#define UDCCONR_IN_S	(22)
#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
#define UDCCONR_AISN_S	(19)
#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
#define UDCCONR_EN_S	(15)
#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
#define UDCCONR_ET_S	(13)
#define UDCCONR_ET_INT	(0x03 << 13)	/* Interrupt */
#define UDCCONR_ET_BULK	(0x02 << 13)	/* Bulk */
#define UDCCONR_ET_ISO	(0x01 << 13)	/* Isochronous */
#define UDCCONR_ET_NU	(0x00 << 13)	/* Not used */
#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
#define UDCCONR_MPS_S	(2)
#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */


#define UDC_INT_FIFOERROR	(0x2)
#define UDC_INT_PACKETCMP	(0x1)
#define UDC_FNR_MASK		(0x7ff)
#define UDCCSR_WR_MASK		(UDCCSR_DME|UDCCSR_FST)
#define UDC_BCR_MASK		(0x3ff)

#endif /* CONFIG_PXA27X */

#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)

/*
 * USB Host Controller
 */
#define OHCI_REGS_BASE	0x4C000000	/* required for ohci driver */
#define UHCREV		__REG(0x4C000000)
#define UHCHCON		__REG(0x4C000004)
#define UHCCOMS		__REG(0x4C000008)
#define UHCINTS		__REG(0x4C00000C)
#define UHCINTE		__REG(0x4C000010)
#define UHCINTD		__REG(0x4C000014)
#define UHCHCCA		__REG(0x4C000018)
#define UHCPCED		__REG(0x4C00001C)
#define UHCCHED		__REG(0x4C000020)
#define UHCCCED		__REG(0x4C000024)
#define UHCBHED		__REG(0x4C000028)
#define UHCBCED		__REG(0x4C00002C)
#define UHCDHEAD	__REG(0x4C000030)
#define UHCFMI		__REG(0x4C000034)
#define UHCFMR		__REG(0x4C000038)
#define UHCFMN		__REG(0x4C00003C)
#define UHCPERS		__REG(0x4C000040)
#define UHCLST		__REG(0x4C000044)
#define UHCRHDA		__REG(0x4C000048)
#define UHCRHDB		__REG(0x4C00004C)
#define UHCRHS		__REG(0x4C000050)
#define UHCRHPS1	__REG(0x4C000054)
#define UHCRHPS2	__REG(0x4C000058)
#define UHCRHPS3	__REG(0x4C00005C)
#define UHCSTAT		__REG(0x4C000060)
#define UHCHR		__REG(0x4C000064)
#define UHCHIE		__REG(0x4C000068)
#define UHCHIT		__REG(0x4C00006C)

#if defined(CONFIG_CPU_MONAHANS)
#define UP2OCR		__REG(0x40600020)
#endif

#define UHCHR_FSBIR	(1<<0)
#define UHCHR_FHR	(1<<1)
#define UHCHR_CGR	(1<<2)
#define UHCHR_SSDC	(1<<3)
#define UHCHR_UIT	(1<<4)
#define UHCHR_SSE	(1<<5)
#define UHCHR_PSPL	(1<<6)
#define UHCHR_PCPL	(1<<7)
#define UHCHR_SSEP0	(1<<9)
#define UHCHR_SSEP1	(1<<10)
#define UHCHR_SSEP2	(1<<11)

#define UHCHIE_UPRIE	(1<<13)
#define UHCHIE_UPS2IE	(1<<12)
#define UHCHIE_UPS1IE	(1<<11)
#define UHCHIE_TAIE	(1<<10)
#define UHCHIE_HBAIE	(1<<8)
#define UHCHIE_RWIE	(1<<7)

#endif

/*
 * Fast Infrared Communication Port
 */
#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */

/*
 * Real Time Clock
 */
#define RCNR		__REG(0x40900000)  /* RTC Count Register */
#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
#define RTSR		__REG(0x40900008)  /* RTC Status Register */
#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
#define RDAR1		__REG(0x40900018)  /* Wristwatch Day Alarm Reg 1 */
#define RDAR2		__REG(0x40900020)  /* Wristwatch Day Alarm Reg 2 */
#define RYAR1		__REG(0x4090001C)  /* Wristwatch Year Alarm Reg 1 */
#define RYAR2		__REG(0x40900024)  /* Wristwatch Year Alarm Reg 2 */
#define SWAR1		__REG(0x4090002C)  /* Stopwatch Alarm Register 1 */
#define SWAR2		__REG(0x40900030)  /* Stopwatch Alarm Register 2 */
#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
#define RDCR		__REG(0x40900010)  /* RTC Day Count Register. */
#define RYCR		__REG(0x40900014)  /* RTC Year Count Register. */
#define SWCR		__REG(0x40900028)  /* Stopwatch Count Register */
#define RTCPICR		__REG(0x40900034)  /* Periodic Interrupt Counter Register */

#define RTSR_PICE	(1 << 15)	/* Peridoc interrupt count enable */
#define RTSR_PIALE	(1 << 14)	/* Peridoc interrupt Alarm enable */
#define RTSR_PIAL	(1 << 13)	/* Peridoc  interrupt Alarm status */
#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
#define RTSR_AL		(1 << 0)	/* RTC alarm detected */

/*
 * OS Timer & Match Registers
 */
#define OSMR0		__REG(0x40A00000)  /* OS Timer Match Register 0 */
#define OSMR1		__REG(0x40A00004)  /* OS Timer Match Register 1 */
#define OSMR2		__REG(0x40A00008)  /* OS Timer Match Register 2 */
#define OSMR3		__REG(0x40A0000C)  /* OS Timer Match Register 3 */
#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */

#ifdef CONFIG_CPU_MONAHANS
#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register 4 */
#define OSCR5		__REG(0x40A00044)  /* OS Timer Counter Register 5 */
#define OSCR6		__REG(0x40A00048)  /* OS Timer Counter Register 6 */
#define OSCR7		__REG(0x40A0004C)  /* OS Timer Counter Register 7 */
#define OSCR8		__REG(0x40A00050)  /* OS Timer Counter Register 8 */
#define OSCR9		__REG(0x40A00054)  /* OS Timer Counter Register 9 */
#define OSCR10		__REG(0x40A00058)  /* OS Timer Counter Register 10 */
#define OSCR11		__REG(0x40A0005C)  /* OS Timer Counter Register 11 */

#define OSMR4		__REG(0x40A00080)  /* OS Timer Match Register 4 */
#define OSMR5		__REG(0x40A00084)  /* OS Timer Match Register 5 */
#define OSMR6		__REG(0x40A00088)  /* OS Timer Match Register 6 */
#define OSMR7		__REG(0x40A0008C)  /* OS Timer Match Register 7 */
#define OSMR8		__REG(0x40A00090)  /* OS Timer Match Register 8 */
#define OSMR9		__REG(0x40A00094)  /* OS Timer Match Register 9 */
#define OSMR10		__REG(0x40A00098)  /* OS Timer Match Register 10 */
#define OSMR11		__REG(0x40A0009C)  /* OS Timer Match Register 11 */

#define OMCR4		__REG(0x40A000C0)  /* OS Match Control Register 4 */
#define OMCR5		__REG(0x40A000C4)  /* OS Match Control Register 5 */
#define OMCR6		__REG(0x40A000C8)  /* OS Match Control Register 6 */
#define OMCR7		__REG(0x40A000CC)  /* OS Match Control Register 7 */
#define OMCR8		__REG(0x40A000D0)  /* OS Match Control Register 8 */
#define OMCR9		__REG(0x40A000D4)  /* OS Match Control Register 9 */
#define OMCR10		__REG(0x40A000D8)  /* OS Match Control Register 10 */
#define OMCR11		__REG(0x40A000DC)  /* OS Match Control Register 11 */

#define OSCR_CLK_FREQ	 3.250		   /* MHz */
#endif /* CONFIG_CPU_MONAHANS */

#define OSSR_M4		(1 << 4)	/* Match status channel 4 */
#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
#define OSSR_M0		(1 << 0)	/* Match status channel 0 */

#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */

#define OIER_E4		(1 << 4)	/* Interrupt enable channel 4 */
#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */

/*
 * Pulse Width Modulator
 */
#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */

#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */

/*
 * Interrupt Controller
 */
#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */

#ifdef CONFIG_CPU_MONAHANS
#define ICHP		__REG(0x40D00018)  /* Interrupt Controller Highest Priority Register */
/* Missing: 32 Interrupt priority registers
 * These are the same as beneath for PXA27x: maybe can be merged if
 * GPIO Stuff is same too.
 */
#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
/* Missing: 2 Interrupt priority registers */
#endif /* CONFIG_CPU_MONAHANS */

/*
 * General Purpose I/O
 */
#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */

#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */

#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */

#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */

#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */

#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */

#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */

#ifdef CONFIG_CPU_MONAHANS
#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */

#define GSDR0		__REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */
#define GSDR1		__REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */
#define GSDR2		__REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */
#define GSDR3		__REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */

#define GCDR0		__REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */
#define GCDR1		__REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */
#define GCDR2		__REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */
#define GCDR3		__REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */

#define GSRER0		__REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
#define GSRER1		__REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
#define GSRER2		__REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
#define GSRER3		__REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */

#define GCRER0		__REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
#define GCRER1		__REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
#define GCRER2		__REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
#define GCRER3		__REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */

#define GSFER0		__REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
#define GSFER1		__REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
#define GSFER2		__REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
#define GSFER3		__REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */

#define GCFER0		__REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
#define GCFER1		__REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
#define GCFER2		__REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
#define GCFER3		__REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */

#define GSDR(x)		__REG2(0x40E00400, ((x) & 0x60) >> 3)
#define GCDR(x)		__REG2(0x40300420, ((x) & 0x60) >> 3)

/* Multi-funktion Pin Registers, uncomplete, only:
 *    - GPIO
 *    - Data Flash DF_* pins defined.
 */
#define GPIO0		__REG(0x40e10124)
#define GPIO1		__REG(0x40e10128)
#define GPIO2		__REG(0x40e1012c)
#define GPIO3		__REG(0x40e10130)
#define GPIO4		__REG(0x40e10134)
#define nXCVREN		__REG(0x40e10138)

#define DF_CLE_NOE	__REG(0x40e10204)
#define DF_ALE_WE1	__REG(0x40e10208)

#define DF_SCLK_E	__REG(0x40e10210)
#define nBE0		__REG(0x40e10214)
#define nBE1		__REG(0x40e10218)
#define DF_ALE_WE2	__REG(0x40e1021c)
#define DF_INT_RnB	__REG(0x40e10220)
#define DF_nCS0		__REG(0x40e10224)
#define DF_nCS1		__REG(0x40e10228)
#define DF_nWE		__REG(0x40e1022c)
#define DF_nRE		__REG(0x40e10230)
#define nLUA		__REG(0x40e10234)
#define nLLA		__REG(0x40e10238)
#define DF_ADDR0	__REG(0x40e1023c)
#define DF_ADDR1	__REG(0x40e10240)
#define DF_ADDR2	__REG(0x40e10244)
#define DF_ADDR3	__REG(0x40e10248)
#define DF_IO0		__REG(0x40e1024c)
#define DF_IO8		__REG(0x40e10250)
#define DF_IO1		__REG(0x40e10254)
#define DF_IO9		__REG(0x40e10258)
#define DF_IO2		__REG(0x40e1025c)
#define DF_IO10		__REG(0x40e10260)
#define DF_IO3		__REG(0x40e10264)
#define DF_IO11		__REG(0x40e10268)
#define DF_IO4		__REG(0x40e1026c)
#define DF_IO12		__REG(0x40e10270)
#define DF_IO5		__REG(0x40e10274)
#define DF_IO13		__REG(0x40e10278)
#define DF_IO6		__REG(0x40e1027c)
#define DF_IO14		__REG(0x40e10280)
#define DF_IO7		__REG(0x40e10284)
#define DF_IO15		__REG(0x40e10288)

#define GPIO5		__REG(0x40e1028c)
#define GPIO6		__REG(0x40e10290)
#define GPIO7		__REG(0x40e10294)
#define GPIO8		__REG(0x40e10298)
#define GPIO9		__REG(0x40e1029c)

#define GPIO11		__REG(0x40e102a0)
#define GPIO12		__REG(0x40e102a4)
#define GPIO13		__REG(0x40e102a8)
#define GPIO14		__REG(0x40e102ac)
#define GPIO15		__REG(0x40e102b0)
#define GPIO16		__REG(0x40e102b4)
#define GPIO17		__REG(0x40e102b8)
#define GPIO18		__REG(0x40e102bc)
#define GPIO19		__REG(0x40e102c0)
#define GPIO20		__REG(0x40e102c4)
#define GPIO21		__REG(0x40e102c8)
#define GPIO22		__REG(0x40e102cc)
#define GPIO23		__REG(0x40e102d0)
#define GPIO24		__REG(0x40e102d4)
#define GPIO25		__REG(0x40e102d8)
#define GPIO26		__REG(0x40e102dc)

#define GPIO27		__REG(0x40e10400)
#define GPIO28		__REG(0x40e10404)
#define GPIO29		__REG(0x40e10408)
#define GPIO30		__REG(0x40e1040c)
#define GPIO31		__REG(0x40e10410)
#define GPIO32		__REG(0x40e10414)
#define GPIO33		__REG(0x40e10418)
#define GPIO34		__REG(0x40e1041c)
#define GPIO35		__REG(0x40e10420)
#define GPIO36		__REG(0x40e10424)
#define GPIO37		__REG(0x40e10428)
#define GPIO38		__REG(0x40e1042c)
#define GPIO39		__REG(0x40e10430)
#define GPIO40		__REG(0x40e10434)
#define GPIO41		__REG(0x40e10438)
#define GPIO42		__REG(0x40e1043c)
#define GPIO43		__REG(0x40e10440)
#define GPIO44		__REG(0x40e10444)
#define GPIO45		__REG(0x40e10448)
#define GPIO46		__REG(0x40e1044c)
#define GPIO47		__REG(0x40e10450)
#define GPIO48		__REG(0x40e10454)

#define GPIO10		__REG(0x40e10458)

#define GPIO49		__REG(0x40e1045c)
#define GPIO50		__REG(0x40e10460)
#define GPIO51		__REG(0x40e10464)
#define GPIO52		__REG(0x40e10468)
#define GPIO53		__REG(0x40e1046c)
#define GPIO54		__REG(0x40e10470)
#define GPIO55		__REG(0x40e10474)
#define GPIO56		__REG(0x40e10478)
#define GPIO57		__REG(0x40e1047c)
#define GPIO58		__REG(0x40e10480)
#define GPIO59		__REG(0x40e10484)
#define GPIO60		__REG(0x40e10488)
#define GPIO61		__REG(0x40e1048c)
#define GPIO62		__REG(0x40e10490)

#define GPIO6_2		__REG(0x40e10494)
#define GPIO7_2		__REG(0x40e10498)
#define GPIO8_2		__REG(0x40e1049c)
#define GPIO9_2		__REG(0x40e104a0)
#define GPIO10_2	__REG(0x40e104a4)
#define GPIO11_2	__REG(0x40e104a8)
#define GPIO12_2	__REG(0x40e104ac)
#define GPIO13_2	__REG(0x40e104b0)

#define GPIO63		__REG(0x40e104b4)
#define GPIO64		__REG(0x40e104b8)
#define GPIO65		__REG(0x40e104bc)
#define GPIO66		__REG(0x40e104c0)
#define GPIO67		__REG(0x40e104c4)
#define GPIO68		__REG(0x40e104c8)
#define GPIO69		__REG(0x40e104cc)
#define GPIO70		__REG(0x40e104d0)
#define GPIO71		__REG(0x40e104d4)
#define GPIO72		__REG(0x40e104d8)
#define GPIO73		__REG(0x40e104dc)

#define GPIO14_2	__REG(0x40e104e0)
#define GPIO15_2	__REG(0x40e104e4)
#define GPIO16_2	__REG(0x40e104e8)
#define GPIO17_2	__REG(0x40e104ec)

#define GPIO74		__REG(0x40e104f0)
#define GPIO75		__REG(0x40e104f4)
#define GPIO76		__REG(0x40e104f8)
#define GPIO77		__REG(0x40e104fc)
#define GPIO78		__REG(0x40e10500)
#define GPIO79		__REG(0x40e10504)
#define GPIO80		__REG(0x40e10508)
#define GPIO81		__REG(0x40e1050c)
#define GPIO82		__REG(0x40e10510)
#define GPIO83		__REG(0x40e10514)
#define GPIO84		__REG(0x40e10518)
#define GPIO85		__REG(0x40e1051c)
#define GPIO86		__REG(0x40e10520)
#define GPIO87		__REG(0x40e10524)
#define GPIO88		__REG(0x40e10528)
#define GPIO89		__REG(0x40e1052c)
#define GPIO90		__REG(0x40e10530)
#define GPIO91		__REG(0x40e10534)
#define GPIO92		__REG(0x40e10538)
#define GPIO93		__REG(0x40e1053c)
#define GPIO94		__REG(0x40e10540)
#define GPIO95		__REG(0x40e10544)
#define GPIO96		__REG(0x40e10548)
#define GPIO97		__REG(0x40e1054c)
#define GPIO98		__REG(0x40e10550)

#define GPIO99		__REG(0x40e10600)
#define GPIO100		__REG(0x40e10604)
#define GPIO101		__REG(0x40e10608)
#define GPIO102		__REG(0x40e1060c)
#define GPIO103		__REG(0x40e10610)
#define GPIO104		__REG(0x40e10614)
#define GPIO105		__REG(0x40e10618)
#define GPIO106		__REG(0x40e1061c)
#define GPIO107		__REG(0x40e10620)
#define GPIO108		__REG(0x40e10624)
#define GPIO109		__REG(0x40e10628)
#define GPIO110		__REG(0x40e1062c)
#define GPIO111		__REG(0x40e10630)
#define GPIO112		__REG(0x40e10634)

#define GPIO113		__REG(0x40e10638)
#define GPIO114		__REG(0x40e1063c)
#define GPIO115		__REG(0x40e10640)
#define GPIO116		__REG(0x40e10644)
#define GPIO117		__REG(0x40e10648)
#define GPIO118		__REG(0x40e1064c)
#define GPIO119		__REG(0x40e10650)
#define GPIO120		__REG(0x40e10654)
#define GPIO121		__REG(0x40e10658)
#define GPIO122		__REG(0x40e1065c)
#define GPIO123		__REG(0x40e10660)
#define GPIO124		__REG(0x40e10664)
#define GPIO125		__REG(0x40e10668)
#define GPIO126		__REG(0x40e1066c)
#define GPIO127		__REG(0x40e10670)

#define GPIO0_2		__REG(0x40e10674)
#define GPIO1_2		__REG(0x40e10678)
#define GPIO2_2		__REG(0x40e1067c)
#define GPIO3_2		__REG(0x40e10680)
#define GPIO4_2		__REG(0x40e10684)
#define GPIO5_2		__REG(0x40e10688)

/* MFPR Bit Definitions, see 4-10, Vol. 1 */
#define PULL_SEL	0x8000
#define PULLUP_EN	0x4000
#define PULLDOWN_EN	0x2000

#define DRIVE_FAST_1mA	0x0
#define DRIVE_FAST_2mA	0x400
#define DRIVE_FAST_3mA	0x800
#define DRIVE_FAST_4mA	0xC00
#define DRIVE_SLOW_6mA	0x1000
#define DRIVE_FAST_6mA	0x1400
#define DRIVE_SLOW_10mA	0x1800
#define DRIVE_FAST_10mA	0x1C00

#define SLEEP_SEL	0x200
#define SLEEP_DATA	0x100
#define SLEEP_OE_N	0x80
#define EDGE_CLEAR	0x40
#define EDGE_FALL_EN	0x20
#define EDGE_RISE_EN	0x10

#define AF_SEL_0	0x0	/* Alternate function 0 (reset state) */
#define AF_SEL_1	0x1	/* Alternate function 1 */
#define AF_SEL_2	0x2	/* Alternate function 2 */
#define AF_SEL_3	0x3	/* Alternate function 3 */
#define AF_SEL_4	0x4	/* Alternate function 4 */
#define AF_SEL_5	0x5	/* Alternate function 5 */
#define AF_SEL_6	0x6	/* Alternate function 6 */
#define AF_SEL_7	0x7	/* Alternate function 7 */


#else /* CONFIG_CPU_MONAHANS */

#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO 80 */
#endif /* CONFIG_CPU_MONAHANS */

/* More handy macros.  The argument is a literal GPIO number. */

#define GPIO_bit(x)	(1 << ((x) & 0x1f))

#ifdef CONFIG_PXA27X

/* Interrupt Controller */

#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */

#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)

#define GPLR(x)		(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
			((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
#else

#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)

#endif

/* GPIO alternate function assignments */

#define GPIO1_RST		1	/* reset */
#define GPIO6_MMCCLK		6	/* MMC Clock */
#define GPIO8_48MHz		7	/* 48 MHz clock output */
#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
#define GPIO12_32KHz		12	/* 32 kHz out */
#define GPIO13_MBGNT		13	/* memory controller grant */
#define GPIO14_MBREQ		14	/* alternate bus master request */
#define GPIO15_nCS_1		15	/* chip select 1 */
#define GPIO16_PWM0		16	/* PWM0 output */
#define GPIO17_PWM1		17	/* PWM1 output */
#define GPIO18_RDY		18	/* Ext. Bus Ready */
#define GPIO19_DREQ1		19	/* External DMA Request */
#define GPIO20_DREQ0		20	/* External DMA Request */
#define GPIO23_SCLK		23	/* SSP clock */
#define GPIO24_SFRM		24	/* SSP Frame */
#define GPIO25_STXD		25	/* SSP transmit */
#define GPIO26_SRXD		26	/* SSP receive */
#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
#define GPIO31_SYNC		31	/* AC97/I2S sync */
#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
#define GPIO33_nCS_5		33	/* chip select 5 */
#define GPIO34_FFRXD		34	/* FFUART receive */
#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
#define GPIO35_FFCTS		35	/* FFUART Clear to send */
#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
#define GPIO37_FFDSR		37	/* FFUART data set ready */
#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
#define GPIO39_FFTXD		39	/* FFUART transmit data */
#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
#define GPIO41_FFRTS		41	/* FFUART request to send */
#define GPIO42_BTRXD		42	/* BTUART receive data */
#define GPIO43_BTTXD		43	/* BTUART transmit data */
#define GPIO44_BTCTS		44	/* BTUART clear to send */
#define GPIO45_BTRTS		45	/* BTUART request to send */
#define GPIO46_ICPRXD		46	/* ICP receive data */
#define GPIO46_STRXD		46	/* STD_UART receive data */
#define GPIO47_ICPTXD		47	/* ICP transmit data */
#define GPIO47_STTXD		47	/* STD_UART transmit data */
#define GPIO48_nPOE		48	/* Output Enable for Card Space */
#define GPIO49_nPWE		49	/* Write Enable for Card Space */
#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
#define GPIO53_MMCCLK		53	/* MMC Clock */
#define GPIO54_MMCCLK		54	/* MMC Clock */
#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
#define GPIO55_nPREG		55	/* Card Address bit 26 */
#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
#define GPIO58_LDD_0		58	/* LCD data pin 0 */
#define GPIO59_LDD_1		59	/* LCD data pin 1 */
#define GPIO60_LDD_2		60	/* LCD data pin 2 */
#define GPIO61_LDD_3		61	/* LCD data pin 3 */
#define GPIO62_LDD_4		62	/* LCD data pin 4 */
#define GPIO63_LDD_5		63	/* LCD data pin 5 */
#define GPIO64_LDD_6		64	/* LCD data pin 6 */
#define GPIO65_LDD_7		65	/* LCD data pin 7 */
#define GPIO66_LDD_8		66	/* LCD data pin 8 */
#define GPIO66_MBREQ		66	/* alternate bus master req */
#define GPIO67_LDD_9		67	/* LCD data pin 9 */
#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
#define GPIO68_LDD_10		68	/* LCD data pin 10 */
#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
#define GPIO69_LDD_11		69	/* LCD data pin 11 */
#define GPIO69_MMCCLK		69	/* MMC_CLK */
#define GPIO70_LDD_12		70	/* LCD data pin 12 */
#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
#define GPIO71_LDD_13		71	/* LCD data pin 13 */
#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
#define GPIO72_LDD_14		72	/* LCD data pin 14 */
#define GPIO72_32kHz		72	/* 32 kHz clock */
#define GPIO73_LDD_15		73	/* LCD data pin 15 */
#define GPIO73_MBGNT		73	/* Memory controller grant */
#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
#define GPIO75_LCD_LCLK		75	/* LCD line clock */
#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
#define GPIO78_nCS_2		78	/* chip select 2 */
#define GPIO79_nCS_3		79	/* chip select 3 */
#define GPIO80_nCS_4		80	/* chip select 4 */

/* GPIO alternate function mode & direction */

#define GPIO_IN			0x000
#define GPIO_OUT		0x080
#define GPIO_ALT_FN_1_IN	0x100
#define GPIO_ALT_FN_1_OUT	0x180
#define GPIO_ALT_FN_2_IN	0x200
#define GPIO_ALT_FN_2_OUT	0x280
#define GPIO_ALT_FN_3_IN	0x300
#define GPIO_ALT_FN_3_OUT	0x380
#define GPIO_MD_MASK_NR		0x07f
#define GPIO_MD_MASK_DIR	0x080
#define GPIO_MD_MASK_FN		0x300

#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
#define GPIO8_48MHz_MD		( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
#define GPIO23_SCLK_md		(23 | GPIO_ALT_FN_2_OUT)
#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)

#define GPIO117_SCL		(117 | GPIO_ALT_FN_1_OUT)
#define GPIO118_SDA		(118 | GPIO_ALT_FN_1_OUT)

/*
 * Power Manager
 */
#ifdef CONFIG_CPU_MONAHANS

#define ASCR		__REG(0x40F40000)  /* Application Subsystem Power Status/Control Register */
#define ARSR		__REG(0x40F40004)  /* Application Subsystem Reset Status Register */
#define AD3ER		__REG(0x40F40008)  /* Application Subsystem D3 state Wakeup Enable Register */
#define AD3SR		__REG(0x40F4000C)  /* Application Subsystem D3 state Wakeup Status Register */
#define AD2D0ER		__REG(0x40F40010)  /* Application Subsystem D2 to D0 state Wakeup Enable Register */
#define AD2D0SR		__REG(0x40F40014)  /* Application Subsystem D2 to D0 state Wakeup Status Register */
#define AD2D1ER		__REG(0x40F40018)  /* Application Subsystem D2 to D1 state Wakeup Enable Register */
#define AD2D1SR		__REG(0x40F4001C)  /* Application Subsystem D2 to D1 state Wakeup Status Register */
#define AD1D0ER		__REG(0x40F40020)  /* Application Subsystem D1 to D0 state Wakeup Enable Register */
#define AD1D0SR		__REG(0x40F40024)  /* Application Subsystem D1 to D0 state Wakeup Status Register */
#define ASDCNT		__REG(0x40F40028)  /* Application Subsystem SRAM Drowsy Count Register */
#define AD3R		__REG(0x40F40030)  /* Application Subsystem D3 State Configuration Register */
#define AD2R		__REG(0x40F40034)  /* Application Subsystem D2 State Configuration Register */
#define AD1R		__REG(0x40F40038)  /* Application Subsystem D1 State Configuration Register */

#define PMCR		__REG(0x40F50000)  /* Power Manager Control Register */
#define PSR		__REG(0x40F50004)  /* Power Manager S2 Status Register */
#define PSPR		__REG(0x40F50008)  /* Power Manager Scratch Pad Register */
#define PCFR		__REG(0x40F5000C)  /* Power Manager General Configuration Register */
#define PWER		__REG(0x40F50010)  /* Power Manager Wake-up Enable Register */
#define PWSR		__REG(0x40F50014)  /* Power Manager Wake-up Status Register */
#define PECR		__REG(0x40F50018)  /* Power Manager EXT_WAKEUP[1:0] Control Register */
#define DCDCSR		__REG(0x40F50080)  /* DC-DC Controller Status Register */
#define PVCR		__REG(0x40F50100)  /* Power Manager Voltage Change Control Register */
#define    PCMD(x) __REG(0x40F50110 + x*4)
#define    PCMD0   __REG(0x40F50110 + 0 * 4)
#define    PCMD1   __REG(0x40F50110 + 1 * 4)
#define    PCMD2   __REG(0x40F50110 + 2 * 4)
#define    PCMD3   __REG(0x40F50110 + 3 * 4)
#define    PCMD4   __REG(0x40F50110 + 4 * 4)
#define    PCMD5   __REG(0x40F50110 + 5 * 4)
#define    PCMD6   __REG(0x40F50110 + 6 * 4)
#define    PCMD7   __REG(0x40F50110 + 7 * 4)
#define    PCMD8   __REG(0x40F50110 + 8 * 4)
#define    PCMD9   __REG(0x40F50110 + 9 * 4)
#define    PCMD10  __REG(0x40F50110 + 10 * 4)
#define    PCMD11  __REG(0x40F50110 + 11 * 4)
#define    PCMD12  __REG(0x40F50110 + 12 * 4)
#define    PCMD13  __REG(0x40F50110 + 13 * 4)
#define    PCMD14  __REG(0x40F50110 + 14 * 4)
#define    PCMD15  __REG(0x40F50110 + 15 * 4)
#define    PCMD16  __REG(0x40F50110 + 16 * 4)
#define    PCMD17  __REG(0x40F50110 + 17 * 4)
#define    PCMD18  __REG(0x40F50110 + 18 * 4)
#define    PCMD19  __REG(0x40F50110 + 19 * 4)
#define    PCMD20  __REG(0x40F50110 + 20 * 4)
#define    PCMD21  __REG(0x40F50110 + 21 * 4)
#define    PCMD22  __REG(0x40F50110 + 22 * 4)
#define    PCMD23  __REG(0x40F50110 + 23 * 4)
#define    PCMD24  __REG(0x40F50110 + 24 * 4)
#define    PCMD25  __REG(0x40F50110 + 25 * 4)
#define    PCMD26  __REG(0x40F50110 + 26 * 4)
#define    PCMD27  __REG(0x40F50110 + 27 * 4)
#define    PCMD28  __REG(0x40F50110 + 28 * 4)
#define    PCMD29  __REG(0x40F50110 + 29 * 4)
#define    PCMD30  __REG(0x40F50110 + 30 * 4)
#define    PCMD31  __REG(0x40F50110 + 31 * 4)

#define    PCMD_MBC    (1<<12)
#define    PCMD_DCE    (1<<11)
#define    PCMD_LC     (1<<10)
#define    PCMD_SQC    (3<<8)  /* only 00 and 01 are valid */

#define PVCR_FVC                   (0x1 << 28)
#define PVCR_VCSA                  (0x1<<14)
#define PVCR_CommandDelay          (0xf80)
#define PVCR_ReadPointer           (0x01f00000)
#define PVCR_SlaveAddress          (0x7f)

#else /* ifdef CONFIG_CPU_MONAHANS */

#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */

#define	   PSLR	   __REG(0x40F00034)	/* Power Manager Sleep Config Register */
#define	   PSTR	   __REG(0x40F00038)	/* Power Manager Standby Config Register */
#define	   PSNR	   __REG(0x40F0003C)	/* Power Manager Sense Config Register */
#define	   PVCR	   __REG(0x40F00040)	/* Power Manager VoltageControl Register */
#define	   PKWR	   __REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
#define	   PKSR	   __REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
#define	   PCMD(x) __REG(0x40F00080 + x*4)
#define	   PCMD0   __REG(0x40F00080 + 0 * 4)
#define	   PCMD1   __REG(0x40F00080 + 1 * 4)
#define	   PCMD2   __REG(0x40F00080 + 2 * 4)
#define	   PCMD3   __REG(0x40F00080 + 3 * 4)
#define	   PCMD4   __REG(0x40F00080 + 4 * 4)
#define	   PCMD5   __REG(0x40F00080 + 5 * 4)
#define	   PCMD6   __REG(0x40F00080 + 6 * 4)
#define	   PCMD7   __REG(0x40F00080 + 7 * 4)
#define	   PCMD8   __REG(0x40F00080 + 8 * 4)
#define	   PCMD9   __REG(0x40F00080 + 9 * 4)
#define	   PCMD10  __REG(0x40F00080 + 10 * 4)
#define	   PCMD11  __REG(0x40F00080 + 11 * 4)
#define	   PCMD12  __REG(0x40F00080 + 12 * 4)
#define	   PCMD13  __REG(0x40F00080 + 13 * 4)
#define	   PCMD14  __REG(0x40F00080 + 14 * 4)
#define	   PCMD15  __REG(0x40F00080 + 15 * 4)
#define	   PCMD16  __REG(0x40F00080 + 16 * 4)
#define	   PCMD17  __REG(0x40F00080 + 17 * 4)
#define	   PCMD18  __REG(0x40F00080 + 18 * 4)
#define	   PCMD19  __REG(0x40F00080 + 19 * 4)
#define	   PCMD20  __REG(0x40F00080 + 20 * 4)
#define	   PCMD21  __REG(0x40F00080 + 21 * 4)
#define	   PCMD22  __REG(0x40F00080 + 22 * 4)
#define	   PCMD23  __REG(0x40F00080 + 23 * 4)
#define	   PCMD24  __REG(0x40F00080 + 24 * 4)
#define	   PCMD25  __REG(0x40F00080 + 25 * 4)
#define	   PCMD26  __REG(0x40F00080 + 26 * 4)
#define	   PCMD27  __REG(0x40F00080 + 27 * 4)
#define	   PCMD28  __REG(0x40F00080 + 28 * 4)
#define	   PCMD29  __REG(0x40F00080 + 29 * 4)
#define	   PCMD30  __REG(0x40F00080 + 30 * 4)
#define	   PCMD31  __REG(0x40F00080 + 31 * 4)

#define	   PCMD_MBC    (1<<12)
#define	   PCMD_DCE    (1<<11)
#define	   PCMD_LC     (1<<10)
/* FIXME:  PCMD_SQC need be checked.   */
#define	   PCMD_SQC    (3<<8)  /* currently only bit 8 is changerable, */
				/* bit 9 should be 0 all day. */
#define PVCR_VCSA		   (0x1<<14)
#define PVCR_CommandDelay	   (0xf80)
/* define MACRO for Power Manager General Configuration Register (PCFR) */
#define PCFR_FVC		   (0x1 << 10)
#define PCFR_PI2C_EN		   (0x1 << 6)

#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */

#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */

#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
#define RCSR_HWR	(1 << 0)	/* Hardware Reset */

#endif /* CONFIG_CPU_MONAHANS */

/*
 * SSP Serial Port Registers
 */
#define SSCR0		__REG(0x41000000)  /* SSP Control Register 0 */
#define SSCR1		__REG(0x41000004)  /* SSP Control Register 1 */
#define SSSR		__REG(0x41000008)  /* SSP Status Register */
#define SSITR		__REG(0x4100000C)  /* SSP Interrupt Test Register */
#define SSDR		__REG(0x41000010)  /* (Write / Read) SSP Data Write Register/SSP Data Read Register */

/*
 * MultiMediaCard (MMC) controller
 */
#define MMC_STRPCL	__REG(0x41100000)  /* Control to start and stop MMC clock */
#define MMC_STAT	__REG(0x41100004)  /* MMC Status Register (read only) */
#define MMC_CLKRT	__REG(0x41100008)  /* MMC clock rate */
#define MMC_SPI		__REG(0x4110000c)  /* SPI mode control bits */
#define MMC_CMDAT	__REG(0x41100010)  /* Command/response/data sequence control */
#define MMC_RESTO	__REG(0x41100014)  /* Expected response time out */
#define MMC_RDTO	__REG(0x41100018)  /* Expected data read time out */
#define MMC_BLKLEN	__REG(0x4110001c)  /* Block length of data transaction */
#define MMC_NOB		__REG(0x41100020)  /* Number of blocks, for block mode */
#define MMC_PRTBUF	__REG(0x41100024)  /* Partial MMC_TXFIFO FIFO written */
#define MMC_I_MASK	__REG(0x41100028)  /* Interrupt Mask */
#define MMC_I_REG	__REG(0x4110002c)  /* Interrupt Register (read only) */
#define MMC_CMD		__REG(0x41100030)  /* Index of current command */
#define MMC_ARGH	__REG(0x41100034)  /* MSW part of the current command argument */
#define MMC_ARGL	__REG(0x41100038)  /* LSW part of the current command argument */
#define MMC_RES		__REG(0x4110003c)  /* Response FIFO (read only) */
#define MMC_RXFIFO	__REG(0x41100040)  /* Receive FIFO (read only) */
#define MMC_TXFIFO	__REG(0x41100044)  /* Transmit FIFO (write only) */

/*
 * Core Clock
 */

#if defined(CONFIG_CPU_MONAHANS)
#define ACCR		__REG(0x41340000)  /* Application Subsystem Clock Configuration Register */
#define ACSR		__REG(0x41340004)  /* Application Subsystem Clock Status Register */
#define AICSR		__REG(0x41340008)  /* Application Subsystem Interrupt Control/Status Register */
#define CKENA		__REG(0x4134000C)  /* A Clock Enable Register */
#define CKENB		__REG(0x41340010)  /* B Clock Enable Register */
#define AC97_DIV	__REG(0x41340014)  /* AC97 clock divisor value register */

#define ACCR_SMC_MASK	0x03800000	/* Static Memory Controller Frequency Select */
#define ACCR_SRAM_MASK	0x000c0000	/* SRAM Controller Frequency Select */
#define ACCR_FC_MASK	0x00030000	/* Frequency Change Frequency Select */
#define ACCR_HSIO_MASK	0x0000c000	/* High Speed IO Frequency Select */
#define ACCR_DDR_MASK	0x00003000	/* DDR Memory Controller Frequency Select */
#define ACCR_XN_MASK	0x00000700	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#define ACCR_XL_MASK	0x0000001f	/* Crystal Frequency to Memory Frequency Multiplier */
#define ACCR_XPDIS	(1 << 31)
#define ACCR_SPDIS	(1 << 30)
#define ACCR_13MEND1	(1 << 27)
#define ACCR_D0CS	(1 << 26)
#define ACCR_13MEND2	(1 << 21)
#define ACCR_PCCE	(1 << 11)

#define CKENA_30_MSL0	(1 << 30)	/* MSL0 Interface Unit Clock Enable */
#define CKENA_29_SSP4	(1 << 29)	/* SSP3 Unit Clock Enable */
#define CKENA_28_SSP3	(1 << 28)	/* SSP2 Unit Clock Enable */
#define CKENA_27_SSP2	(1 << 27)	/* SSP1 Unit Clock Enable */
#define CKENA_26_SSP1	(1 << 26)	/* SSP0 Unit Clock Enable */
#define CKENA_25_TSI	(1 << 25)	/* TSI Clock Enable */
#define CKENA_24_AC97	(1 << 24)	/* AC97 Unit Clock Enable */
#define CKENA_23_STUART	(1 << 23)	/* STUART Unit Clock Enable */
#define CKENA_22_FFUART	(1 << 22)	/* FFUART Unit Clock Enable */
#define CKENA_21_BTUART	(1 << 21)	/* BTUART Unit Clock Enable */
#define CKENA_20_UDC	(1 << 20)	/* UDC Clock Enable */
#define CKENA_19_TPM	(1 << 19)	/* TPM Unit Clock Enable */
#define CKENA_18_USIM1	(1 << 18)	/* USIM1 Unit Clock Enable */
#define CKENA_17_USIM0	(1 << 17)	/* USIM0 Unit Clock Enable */
#define CKENA_15_CIR	(1 << 15)	/* Consumer IR Clock Enable */
#define CKENA_14_KEY	(1 << 14)	/* Keypad Controller Clock Enable */
#define CKENA_13_MMC1	(1 << 13)	/* MMC1 Clock Enable */
#define CKENA_12_MMC0	(1 << 12)	/* MMC0 Clock Enable */
#define CKENA_11_FLASH	(1 << 11)	/* Boot ROM Clock Enable */
#define CKENA_10_SRAM	(1 << 10)	/* SRAM Controller Clock Enable */
#define CKENA_9_SMC	(1 << 9)	/* Static Memory Controller */
#define CKENA_8_DMC	(1 << 8)	/* Dynamic Memory Controller */
#define CKENA_7_GRAPHICS (1 << 7)	/* 2D Graphics Clock Enable */
#define CKENA_6_USBCLI	(1 << 6)	/* USB Client Unit Clock Enable */
#define CKENA_4_NAND	(1 << 4)	/* NAND Flash Controller Clock Enable */
#define CKENA_3_CAMERA	(1 << 3)	/* Camera Interface Clock Enable */
#define CKENA_2_USBHOST	(1 << 2)	/* USB Host Unit Clock Enable */
#define CKENA_1_LCD	(1 << 1)	/* LCD Unit Clock Enable */

#define CKENB_9_SYSBUS2	(1 << 9)	/* System bus 2 */
#define CKENB_8_1WIRE	((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
#define CKENB_7_GPIO	((1 << 7) + 32)	/* GPIO Clock Enable */
#define CKENB_6_IRQ	((1 << 6) + 32)	/* Interrupt Controller Clock Enable */
#define CKENB_4_I2C	((1 << 4) + 32)	/* I2C Unit Clock Enable */
#define CKENB_1_PWM1	((1 << 1) + 32)	/* PWM2 & PWM3 Clock Enable */
#define CKENB_0_PWM0	((1 << 0) + 32)	/* PWM0 & PWM1 Clock Enable */

#else /* if defined CONFIG_CPU_MONAHANS */

#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */

#define CCCR_N_MASK	0x0380		/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#if !defined(CONFIG_PXA27X)
#define CCCR_M_MASK	0x0060		/* Memory Frequency to Run Mode Frequency Multiplier */
#endif
#define CCCR_L_MASK	0x001f		/* Crystal Frequency to Memory Frequency Multiplier */

#define CKEN24_CAMERA	(1 << 24)	/* Camera Interface Clock Enable */
#define CKEN23_SSP1	(1 << 23)	/* SSP1 Unit Clock Enable */
#define CKEN22_MEMC	(1 << 22)	/* Memory Controller Clock Enable */
#define CKEN21_MEMSTK	(1 << 21)	/* Memory Stick Host Controller */
#define CKEN20_IM	(1 << 20)	/* Internal Memory Clock Enable */
#define CKEN19_KEYPAD	(1 << 19)	/* Keypad Interface Clock Enable */
#define CKEN18_USIM	(1 << 18)	/* USIM Unit Clock Enable */
#define CKEN17_MSL	(1 << 17)	/* MSL Unit Clock Enable */
#define CKEN16_LCD	(1 << 16)	/* LCD Unit Clock Enable */
#define CKEN15_PWRI2C	(1 << 15)	/* PWR I2C Unit Clock Enable */
#define CKEN14_I2C	(1 << 14)	/* I2C Unit Clock Enable */
#define CKEN13_FICP	(1 << 13)	/* FICP Unit Clock Enable */
#define CKEN12_MMC	(1 << 12)	/* MMC Unit Clock Enable */
#define CKEN11_USB	(1 << 11)	/* USB Unit Clock Enable */
#if defined(CONFIG_PXA27X)
#define CKEN10_USBHOST	(1 << 10)	/* USB Host Unit Clock Enable */
#define CKEN24_CAMERA	(1 << 24)	/* Camera Unit Clock Enable */
#endif
#define CKEN8_I2S	(1 << 8)	/* I2S Unit Clock Enable */
#define CKEN7_BTUART	(1 << 7)	/* BTUART Unit Clock Enable */
#define CKEN6_FFUART	(1 << 6)	/* FFUART Unit Clock Enable */
#define CKEN5_STUART	(1 << 5)	/* STUART Unit Clock Enable */
#define CKEN3_SSP	(1 << 3)	/* SSP Unit Clock Enable */
#define CKEN2_AC97	(1 << 2)	/* AC97 Unit Clock Enable */
#define CKEN1_PWM1	(1 << 1)	/* PWM1 Clock Enable */
#define CKEN0_PWM0	(1 << 0)	/* PWM0 Clock Enable */

#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */

#if !defined(CONFIG_PXA27X)
#define	 CCCR_L09      (0x1F)
#define	 CCCR_L27      (0x1)
#define	 CCCR_L32      (0x2)
#define	 CCCR_L36      (0x3)
#define	 CCCR_L40      (0x4)
#define	 CCCR_L45      (0x5)

#define	 CCCR_M1       (0x1 << 5)
#define	 CCCR_M2       (0x2 << 5)
#define	 CCCR_M4       (0x3 << 5)

#define	 CCCR_N10      (0x2 << 7)
#define	 CCCR_N15      (0x3 << 7)
#define	 CCCR_N20      (0x4 << 7)
#define	 CCCR_N25      (0x5 << 7)
#define	 CCCR_N30      (0x6 << 7)
#endif

#endif /* CONFIG_CPU_MONAHANS */

/*
 * LCD
 */
#define LCCR0		__REG(0x44000000)  /* LCD Controller Control Register 0 */
#define LCCR1		__REG(0x44000004)  /* LCD Controller Control Register 1 */
#define LCCR2		__REG(0x44000008)  /* LCD Controller Control Register 2 */
#define LCCR3		__REG(0x4400000C)  /* LCD Controller Control Register 3 */
#define DFBR0		__REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
#define DFBR1		__REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
#define LCSR0		__REG(0x44000038)  /* LCD Controller Status Register */
#define LCSR1		__REG(0x44000034)  /* LCD Controller Status Register */
#define LIIDR		__REG(0x4400003C)  /* LCD Controller Interrupt ID Register */
#define TMEDRGBR	__REG(0x44000040)  /* TMED RGB Seed Register */
#define TMEDCR		__REG(0x44000044)  /* TMED Control Register */

#define FDADR0		__REG(0x44000200)  /* DMA Channel 0 Frame Descriptor Address Register */
#define FSADR0		__REG(0x44000204)  /* DMA Channel 0 Frame Source Address Register */
#define FIDR0		__REG(0x44000208)  /* DMA Channel 0 Frame ID Register */
#define LDCMD0		__REG(0x4400020C)  /* DMA Channel 0 Command Register */
#define FDADR1		__REG(0x44000210)  /* DMA Channel 1 Frame Descriptor Address Register */
#define FSADR1		__REG(0x44000214)  /* DMA Channel 1 Frame Source Address Register */
#define FIDR1		__REG(0x44000218)  /* DMA Channel 1 Frame ID Register */
#define LDCMD1		__REG(0x4400021C)  /* DMA Channel 1 Command Register */

#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
#define LCCR0_CMS	(1 << 1)	/* Color = 0, Monochrome = 1 */
#define LCCR0_SDS	(1 << 2)	/* Single Panel = 0, Dual Panel = 1 */
#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
#define LCCR0_PAS	(1 << 7)	/* Passive = 0, Active = 1 */
#define LCCR0_BLE	(1 << 8)	/* Little Endian = 0, Big Endian = 1 */
#define LCCR0_DPD	(1 << 9)	/* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */
#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
#define LCCR0_PDD_S	12
#define LCCR0_BM	(1 << 20)	/* Branch mask */
#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
#if defined(CONFIG_PXA27X)
#define LCCR0_LCDT	(1 << 22)	/* LCD Panel Type */
#define LCCR0_RDSTM	(1 << 23)	/* Read Status Interrupt Mask */
#define LCCR0_CMDIM	(1 << 24)	/* Command Interrupt Mask */
#endif

#define LCCR1_PPL	Fld (10, 0)	 /* Pixels Per Line - 1 */
#define LCCR1_DisWdth(Pixel)		/* Display Width [1..800 pix.]	*/ \
			(((Pixel) - 1) << FShft (LCCR1_PPL))

#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization	  */
#define LCCR1_HorSnchWdth(Tpix)		/* Horizontal Synchronization	  */ \
					/* pulse Width [1..64 Tpix]	  */ \
			(((Tpix) - 1) << FShft (LCCR1_HSW))

#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait	   */
					/* count - 1 [Tpix]		   */
#define LCCR1_EndLnDel(Tpix)		/*  End-of-Line Delay		   */ \
					/*  [1..256 Tpix]		   */ \
			(((Tpix) - 1) << FShft (LCCR1_ELW))

#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock   */
					/* Wait count - 1 [Tpix]	   */
#define LCCR1_BegLnDel(Tpix)		/*  Beginning-of-Line Delay	   */ \
					/*  [1..256 Tpix]		   */ \
			(((Tpix) - 1) << FShft (LCCR1_BLW))


#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1		   */
#define LCCR2_DisHght(Line)		/*  Display Height [1..1024 lines] */ \
			(((Line) - 1) << FShft (LCCR2_LPP))

#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse  */
					/* Width - 1 [Tln] (L_FCLK)	   */
#define LCCR2_VrtSnchWdth(Tln)		/*  Vertical Synchronization pulse */ \
					/*  Width [1..64 Tln]		   */ \
			(((Tln) - 1) << FShft (LCCR2_VSW))

#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait	   */
					/* count [Tln]			   */
#define LCCR2_EndFrmDel(Tln)		/*  End-of-Frame Delay		   */ \
					/*  [0..255 Tln]		   */ \
			((Tln) << FShft (LCCR2_EFW))

#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock   */
					/* Wait count [Tln]		   */
#define LCCR2_BegFrmDel(Tln)		/*  Beginning-of-Frame Delay	   */ \
					/*  [0..255 Tln]		   */ \
			((Tln) << FShft (LCCR2_BFW))

#if 0
#define LCCR3_PCD	(0xff)		/* Pixel clock divisor */
#define LCCR3_ACB	(0xff << 8)	/* AC Bias pin frequency */
#define LCCR3_ACB_S	8
#endif

#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
#define LCCR3_API_S	16
#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
#define LCCR3_PCP	(1 << 22)	/* pixel clock polarity */
#define LCCR3_OEP	(1 << 23)	/* output enable polarity */
#if 0
#define LCCR3_BPP	(7 << 24)	/* bits per pixel */
#define LCCR3_BPP_S	24
#endif
#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */

#define LCCR3_PDFOR_0	 (0 << 30)
#define LCCR3_PDFOR_1	 (1 << 30)
#define LCCR3_PDFOR_2	 (2 << 30)
#define LCCR3_PDFOR_3	 (3 << 30)


#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
#define LCCR3_PixClkDiv(Div)		/* Pixel Clock Divisor */ \
			(((Div) << FShft (LCCR3_PCD)))


#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
#define LCCR3_Bpp(Bpp)			/* Bit Per Pixel */ \
			((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26)))

#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
#define LCCR3_Acb(Acb)			/* BAC Bias */ \
			(((Acb) << FShft (LCCR3_ACB)))

#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  Horizontal Synchronization	   */
					/*  pulse active High		   */
#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  Horizontal Synchronization	   */

#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  Vertical Synchronization pulse */
					/*  active High			   */
#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  Vertical Synchronization pulse */
					/*  active Low			   */

#define LCSR0_LDD	(1 << 0)	/* LCD Disable Done */
#define LCSR0_SOF	(1 << 1)	/* Start of frame */
#define LCSR0_BER	(1 << 2)	/* Bus error */
#define LCSR0_ABC	(1 << 3)	/* AC Bias count */
#define LCSR0_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
#define LCSR0_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
#define LCSR0_OU	(1 << 6)	/* output FIFO underrun */
#define LCSR0_QD	(1 << 7)	/* quick disable */
#define LCSR0_EOF0	(1 << 8)	/* end of frame */
#define LCSR0_BS	(1 << 9)	/* branch status */
#define LCSR0_SINT	(1 << 10)	/* subsequent interrupt */

#define LCSR1_SOF1	(1 << 0)
#define LCSR1_SOF2	(1 << 1)
#define LCSR1_SOF3	(1 << 2)
#define LCSR1_SOF4	(1 << 3)
#define LCSR1_SOF5	(1 << 4)
#define LCSR1_SOF6	(1 << 5)

#define LCSR1_EOF1	(1 << 8)
#define LCSR1_EOF2	(1 << 9)
#define LCSR1_EOF3	(1 << 10)
#define LCSR1_EOF4	(1 << 11)
#define LCSR1_EOF5	(1 << 12)
#define LCSR1_EOF6	(1 << 13)

#define LCSR1_BS1	(1 << 16)
#define LCSR1_BS2	(1 << 17)
#define LCSR1_BS3	(1 << 18)
#define LCSR1_BS4	(1 << 19)
#define LCSR1_BS5	(1 << 20)
#define LCSR1_BS6	(1 << 21)

#define LCSR1_IU2	(1 << 25)
#define LCSR1_IU3	(1 << 26)
#define LCSR1_IU4	(1 << 27)
#define LCSR1_IU5	(1 << 28)
#define LCSR1_IU6	(1 << 29)

#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
#if defined(CONFIG_PXA27X)
#define LDCMD_SOFINT	(1 << 22)
#define LDCMD_EOFINT	(1 << 21)
#endif

/*
 * Memory controller
 */

#ifdef CONFIG_CPU_MONAHANS
/* Static Memory Controller Registers */
#define MSC0		__REG_2(0x4A000008)  /* Static Memory Control Register 0 */
#define MSC1		__REG_2(0x4A00000C)  /* Static Memory Control Register 1 */
#define MECR		__REG_2(0x4A000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXCNFG		__REG_2(0x4A00001C)  /* Synchronous Static Memory Control Register */
#define MCMEM0		__REG_2(0x4A000028)  /* Card interface Common Memory Space Socket 0 Timing */
#define MCATT0		__REG_2(0x4A000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCIO0		__REG_2(0x4A000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
#define MEMCLKCFG	__REG_2(0x4A000068)  /* SCLK speed configuration */
#define CSADRCFG0	__REG_2(0x4A000080)  /* Address Configuration for chip select 0 */
#define CSADRCFG1	__REG_2(0x4A000084)  /* Address Configuration for chip select 1 */
#define CSADRCFG2	__REG_2(0x4A000088)  /* Address Configuration for chip select 2 */
#define CSADRCFG3	__REG_2(0x4A00008C)  /* Address Configuration for chip select 3 */
#define CSADRCFG_P	__REG_2(0x4A000090)  /* Address Configuration for pcmcia card interface */
#define CSMSADRCFG	__REG_2(0x4A0000A0)  /* Master Address Configuration Register */
#define CLK_RET_DEL	__REG_2(0x4A0000B0)  /* Delay line and mux selects for return data latching for sync. flash */
#define ADV_RET_DEL	__REG_2(0x4A0000B4)  /* Delay line and mux selects for return data latching for sync. flash */

/* Dynamic Memory Controller Registers */
#define MDCNFG		__REG_2(0x48100000)  /* SDRAM Configuration Register 0 */
#define MDREFR		__REG_2(0x48100004)  /* SDRAM Refresh Control Register */
#define FLYCNFG		__REG_2(0x48100020)  /* Fly-by DMA DVAL[1:0] polarities */
#define MDMRS		__REG_2(0x48100040)  /* MRS value to be written to SDRAM */
#define	DDR_SCAL	__REG_2(0x48100050)  /* Software Delay Line Calibration/Configuration for external DDR memory. */
#define	DDR_HCAL	__REG_2(0x48100060)  /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
#define	DDR_WCAL	__REG_2(0x48100068)  /* DDR Write Strobe Calibration Register */
#define	DMCIER		__REG_2(0x48100070)  /* Dynamic MC Interrupt Enable Register. */
#define	DMCISR		__REG_2(0x48100078)  /* Dynamic MC Interrupt Status Register. */
#define	DDR_DLS		__REG_2(0x48100080)  /* DDR Delay Line Value Status register for external DDR memory. */
#define	EMPI		__REG_2(0x48100090)  /* EMPI Control Register */
#define RCOMP           __REG_2(0x48100100)
#define PAD_MA          __REG_2(0x48100110)
#define PAD_MDMSB       __REG_2(0x48100114)
#define PAD_MDLSB       __REG_2(0x48100118)
#define PAD_DMEM        __REG_2(0x4810011c)
#define PAD_SDCLK       __REG_2(0x48100120)
#define PAD_SDCS        __REG_2(0x48100124)
#define PAD_SMEM        __REG_2(0x48100128)
#define PAD_SCLK        __REG_2(0x4810012C)
#define TAI		__REG_2(0x48100F00) /* TAI Tavor Address Isolation Register */

/* Some frequently used bits */
#define MDCNFG_DMAP	0x80000000	/* SDRAM 1GB Memory Map Enable */
#define MDCNFG_DMCEN	0x40000000	/* Enable Dynamic Memory Controller */
#define MDCNFG_HWFREQ	0x20000000	/* Hardware Frequency Change Calibration */
#define MDCNFG_DTYPE	0x400		/* SDRAM Type: 1=DDR SDRAM */

#define MDCNFG_DTC_0	0x0		/* Timing Category of SDRAM */
#define MDCNFG_DTC_1	0x100
#define MDCNFG_DTC_2	0x200
#define MDCNFG_DTC_3	0x300

#define MDCNFG_DRAC_12	0x0		/* Number of Row Access Bits */
#define MDCNFG_DRAC_13	0x20
#define MDCNFG_DRAC_14	0x40

#define MDCNFG_DCAC_9	0x0		/* Number of Column Acess Bits */
#define MDCNFG_DCAC_10	0x08
#define MDCNFG_DCAC_11	0x10

#define MDCNFG_DBW_16	0x4		/* SDRAM Data Bus width 16bit */
#define MDCNFG_DCSE1	0x2		/* SDRAM CS 1 Enable */
#define MDCNFG_DCSE0	0x1		/* SDRAM CS 0 Enable */


/* Data Flash Controller Registers */

#define NDCR		__REG(0x43100000)  /* Data Flash Control register */
#define NDTR0CS0	__REG(0x43100004)  /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
/* #define NDTR0CS1	__REG(0x43100008)  /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
#define NDTR1CS0	__REG(0x4310000C)  /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
/* #define NDTR1CS1	__REG(0x43100010)  /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
#define NDSR		__REG(0x43100014)  /* Data Controller Status Register */
#define NDPCR		__REG(0x43100018)  /* Data Controller Page Count Register */
#define NDBDR0		__REG(0x4310001C)  /* Data Controller Bad Block Register 0 */
#define NDBDR1		__REG(0x43100020)  /* Data Controller Bad Block Register 1 */
#define NDDB		__REG(0x43100040)  /* Data Controller Data Buffer */
#define NDCB0		__REG(0x43100048)  /* Data Controller Command Buffer0 */
#define NDCB1		__REG(0x4310004C)  /* Data Controller Command Buffer1 */
#define NDCB2		__REG(0x43100050)  /* Data Controller Command Buffer2 */

#define NDCR_SPARE_EN	(0x1<<31)
#define NDCR_ECC_EN	(0x1<<30)
#define NDCR_DMA_EN	(0x1<<29)
#define NDCR_ND_RUN	(0x1<<28)
#define NDCR_DWIDTH_C	(0x1<<27)
#define NDCR_DWIDTH_M	(0x1<<26)
#define NDCR_PAGE_SZ	(0x3<<24)
#define NDCR_NCSX	(0x1<<23)
#define NDCR_ND_STOP	(0x1<<22)
/* reserved:
 * #define NDCR_ND_MODE	(0x3<<21)
 * #define NDCR_NAND_MODE   0x0 */
#define NDCR_CLR_PG_CNT	(0x1<<20)
#define NDCR_CLR_ECC	(0x1<<19)
#define NDCR_RD_ID_CNT	(0x7<<16)
#define NDCR_RA_START	(0x1<<15)
#define NDCR_PG_PER_BLK	(0x1<<14)
#define NDCR_ND_ARB_EN	(0x1<<12)
#define NDCR_RDYM	(0x1<<11)
#define NDCR_CS0_PAGEDM	(0x1<<10)
#define NDCR_CS1_PAGEDM	(0x1<<9)
#define NDCR_CS0_CMDDM	(0x1<<8)
#define NDCR_CS1_CMDDM	(0x1<<7)
#define NDCR_CS0_BBDM	(0x1<<6)
#define NDCR_CS1_BBDM	(0x1<<5)
#define NDCR_DBERRM	(0x1<<4)
#define NDCR_SBERRM	(0x1<<3)
#define NDCR_WRDREQM	(0x1<<2)
#define NDCR_RDDREQM	(0x1<<1)
#define NDCR_WRCMDREQM	(0x1)

#define NDSR_RDY	(0x1<<11)
#define NDSR_CS0_PAGED	(0x1<<10)
#define NDSR_CS1_PAGED	(0x1<<9)
#define NDSR_CS0_CMDD	(0x1<<8)
#define NDSR_CS1_CMDD	(0x1<<7)
#define NDSR_CS0_BBD	(0x1<<6)
#define NDSR_CS1_BBD	(0x1<<5)
#define NDSR_DBERR	(0x1<<4)
#define NDSR_SBERR	(0x1<<3)
#define NDSR_WRDREQ	(0x1<<2)
#define NDSR_RDDREQ	(0x1<<1)
#define NDSR_WRCMDREQ	(0x1)

#define NDCB0_AUTO_RS	(0x1<<25)
#define NDCB0_CSEL	(0x1<<24)
#define NDCB0_CMD_TYPE	(0x7<<21)
#define NDCB0_NC	(0x1<<20)
#define NDCB0_DBC	(0x1<<19)
#define NDCB0_ADDR_CYC	(0x7<<16)
#define NDCB0_CMD2	(0xff<<8)
#define NDCB0_CMD1	(0xff)
#define MCMEM(s) MCMEM0
#define MCATT(s) MCATT0
#define MCIO(s) MCIO0
#define MECR_CIT	(1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */

/* Maximum values for NAND Interface Timing Registers in DFC clock
 * periods */
#define DFC_MAX_tCH	7
#define DFC_MAX_tCS	7
#define DFC_MAX_tWH	7
#define DFC_MAX_tWP	7
#define DFC_MAX_tRH	7
#define DFC_MAX_tRP	15
#define DFC_MAX_tR	65535
#define DFC_MAX_tWHR	15
#define DFC_MAX_tAR	15

#define DFC_CLOCK	104		/* DFC Clock is 104 MHz */
#define DFC_CLK_PER_US	DFC_CLOCK/1000	/* clock period in ns */

#else /* CONFIG_CPU_MONAHANS */

#define MEMC_BASE	__REG(0x48000000)  /* Base of Memory Controller */
#define MDCNFG_OFFSET	0x0
#define MDREFR_OFFSET	0x4
#define MSC0_OFFSET	0x8
#define MSC1_OFFSET	0xC
#define MSC2_OFFSET	0x10
#define MECR_OFFSET	0x14
#define SXLCR_OFFSET	0x18
#define SXCNFG_OFFSET	0x1C
#define FLYCNFG_OFFSET	0x20
#define SXMRS_OFFSET	0x24
#define MCMEM0_OFFSET	0x28
#define MCMEM1_OFFSET	0x2C
#define MCATT0_OFFSET	0x30
#define MCATT1_OFFSET	0x34
#define MCIO0_OFFSET	0x38
#define MCIO1_OFFSET	0x3C
#define MDMRS_OFFSET	0x40

#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
#define MDCNFG_DE0	0x00000001
#define MDCNFG_DE1	0x00000002
#define MDCNFG_DE2	0x00010000
#define MDCNFG_DE3	0x00020000
#define MDCNFG_DWID0	0x00000004

#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */

#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */

#if defined(CONFIG_PXA27X)

#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */

#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
#define ARB_EX_MEM_PARK		(1<<29)	   /* Be parked with external MEMC when idle */
#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */

#endif /* CONFIG_CPU_MONAHANS */

/* Interrupt Controller */

#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */

/* General Purpose I/O */

#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO <127:96> */
#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */

/* Core Clock */

#define CCSR		__REG(0x4130000C) /* Core Clock Status Register */

#define CKEN23_SSP1	(1 << 23) /* SSP1 Unit Clock Enable */
#define CKEN22_MEMC	(1 << 22) /* Memory Controler */
#define CKEN21_MSHC	(1 << 21) /* Memery Stick Host Controller */
#define CKEN20_IM	(1 << 20) /* Internal Memory Clock Enable */
#define CKEN19_KEYPAD	(1 << 19) /* Keypad Interface Clock Enable */
#define CKEN18_USIM	(1 << 18) /* USIM Unit Clock Enable */
#define CKEN17_MSL	(1 << 17) /* MSL Interface Unit Clock Enable */
#define CKEN15_PWR_I2C	(1 << 15) /* PWR_I2C Unit Clock Enable */
#define CKEN9_OST	(1 << 9)  /* OS Timer Unit Clock Enable */
#define CKEN4_SSP3	(1 << 4)  /* SSP3 Unit Clock Enable */

/* Memory controller */

#define MDREFR_K0DB4	(1 << 29)	  /* SDCLK[0] divide by 4 */

/* LCD registers */
#define LCCR4		__REG(0x44000010)  /* LCD Controller Control Register 4 */
#define LCCR5		__REG(0x44000014)  /* LCD Controller Control Register 5 */
#define FBR0		__REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
#define FBR1		__REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
#define FBR2		__REG(0x44000028)  /* DMA Channel 2 Frame Branch Register */
#define FBR3		__REG(0x4400002C)  /* DMA Channel 3 Frame Branch Register */
#define FBR4		__REG(0x44000030)  /* DMA Channel 4 Frame Branch Register */
#define FDADR2		__REG(0x44000220)  /* DMA Channel 2 Frame Descriptor Address Register */
#define FSADR2		__REG(0x44000224)  /* DMA Channel 2 Frame Source Address Register */
#define FIDR2		__REG(0x44000228)  /* DMA Channel 2 Frame ID Register */
#define LDCMD2		__REG(0x4400022C)  /* DMA Channel 2 Command Register */
#define FDADR3		__REG(0x44000230)  /* DMA Channel 3 Frame Descriptor Address Register */
#define FSADR3		__REG(0x44000234)  /* DMA Channel 3 Frame Source Address Register */
#define FIDR3		__REG(0x44000238)  /* DMA Channel 3 Frame ID Register */
#define LDCMD3		__REG(0x4400023C)  /* DMA Channel 3 Command Register */
#define FDADR4		__REG(0x44000240)  /* DMA Channel 4 Frame Descriptor Address Register */
#define FSADR4		__REG(0x44000244)  /* DMA Channel 4 Frame Source Address Register */
#define FIDR4		__REG(0x44000248)  /* DMA Channel 4 Frame ID Register */
#define LDCMD4		__REG(0x4400024C)  /* DMA Channel 4 Command Register */
#define FDADR5		__REG(0x44000250)  /* DMA Channel 5 Frame Descriptor Address Register */
#define FSADR5		__REG(0x44000254)  /* DMA Channel 5 Frame Source Address Register */
#define FIDR5		__REG(0x44000258)  /* DMA Channel 5 Frame ID Register */
#define LDCMD5		__REG(0x4400025C)  /* DMA Channel 5 Command Register */

#define OVL1C1		__REG(0x44000050)  /* Overlay 1 Control Register 1 */
#define OVL1C2		__REG(0x44000060)  /* Overlay 1 Control Register 2 */
#define OVL2C1		__REG(0x44000070)  /* Overlay 2 Control Register 1 */
#define OVL2C2		__REG(0x44000080)  /* Overlay 2 Control Register 2 */
#define CCR		__REG(0x44000090)  /* Cursor Control Register */

#define FBR5		__REG(0x44000110)  /* DMA Channel 5 Frame Branch Register */
#define FBR6		__REG(0x44000114)  /* DMA Channel 6 Frame Branch Register */

#define LCCR0_LDDALT	(1<<26)		/* LDD Alternate mapping bit when base pixel is RGBT16 */
#define LCCR0_OUC	(1<<25)		/* Overlay Underlay Control Bit */

#define LCCR5_SOFM1	(1<<0)		/* Start Of Frame Mask for Overlay 1 (channel 1) */
#define LCCR5_SOFM2	(1<<1)		/* Start Of Frame Mask for Overlay 2 (channel 2) */
#define LCCR5_SOFM3	(1<<2)		/* Start Of Frame Mask for Overlay 2 (channel 3) */
#define LCCR5_SOFM4	(1<<3)		/* Start Of Frame Mask for Overlay 2 (channel 4) */
#define LCCR5_SOFM5	(1<<4)		/* Start Of Frame Mask for cursor (channel 5) */
#define LCCR5_SOFM6	(1<<5)		/* Start Of Frame Mask for command data (channel 6) */

#define LCCR5_EOFM1	(1<<8)		/* End Of Frame Mask for Overlay 1 (channel 1) */
#define LCCR5_EOFM2	(1<<9)		/* End Of Frame Mask for Overlay 2 (channel 2) */
#define LCCR5_EOFM3	(1<<10)		/* End Of Frame Mask for Overlay 2 (channel 3) */
#define LCCR5_EOFM4	(1<<11)		/* End Of Frame Mask for Overlay 2 (channel 4) */
#define LCCR5_EOFM5	(1<<12)		/* End Of Frame Mask for cursor (channel 5) */
#define LCCR5_EOFM6	(1<<13)		/* End Of Frame Mask for command data (channel 6) */

#define LCCR5_BSM1	(1<<16)		/* Branch mask for Overlay 1 (channel 1) */
#define LCCR5_BSM2	(1<<17)		/* Branch mask for Overlay 2 (channel 2) */
#define LCCR5_BSM3	(1<<18)		/* Branch mask for Overlay 2 (channel 3) */
#define LCCR5_BSM4	(1<<19)		/* Branch mask for Overlay 2 (channel 4) */
#define LCCR5_BSM5	(1<<20)		/* Branch mask for cursor (channel 5) */
#define LCCR5_BSM6	(1<<21)		/* Branch mask for data command	 (channel 6) */

#define LCCR5_IUM1	(1<<24)		/* Input FIFO Underrun Mask for Overlay 1  */
#define LCCR5_IUM2	(1<<25)		/* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM3	(1<<26)		/* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM4	(1<<27)		/* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM5	(1<<28)		/* Input FIFO Underrun Mask for cursor */
#define LCCR5_IUM6	(1<<29)		/* Input FIFO Underrun Mask for data command */

#define OVL1C1_O1EN	(1<<31)		/* Enable bit for Overlay 1 */
#define OVL2C1_O2EN	(1<<31)		/* Enable bit for Overlay 2 */
#define CCR_CEN		(1<<31)		/* Enable bit for Cursor */

/* Keypad controller */

#define KPC		__REG(0x41500000) /* Keypad Interface Control register */
#define KPDK		__REG(0x41500008) /* Keypad Interface Direct Key register */
#define KPREC		__REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */
#define KPMK		__REG(0x41500018) /* Keypad Intefcace Matrix Key register */
#define KPAS		__REG(0x41500020) /* Keypad Interface Automatic Scan register */
#define KPASMKP0	__REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
#define KPASMKP1	__REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
#define KPASMKP2	__REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
#define KPASMKP3	__REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
#define KPKDI		__REG(0x41500048) /* Keypad Interface Key Debounce Interval register */

#define KPC_AS		(0x1 << 30)  /* Automatic Scan bit */
#define KPC_ASACT	(0x1 << 29)  /* Automatic Scan on Activity */
#define KPC_MI		(0x1 << 22)  /* Matrix interrupt bit */
#define KPC_IMKP	(0x1 << 21)  /* Ignore Multiple Key Press */
#define KPC_MS7		(0x1 << 20)  /* Matrix scan line 7 */
#define KPC_MS6		(0x1 << 19)  /* Matrix scan line 6 */
#define KPC_MS5		(0x1 << 18)  /* Matrix scan line 5 */
#define KPC_MS4		(0x1 << 17)  /* Matrix scan line 4 */
#define KPC_MS3		(0x1 << 16)  /* Matrix scan line 3 */
#define KPC_MS2		(0x1 << 15)  /* Matrix scan line 2 */
#define KPC_MS1		(0x1 << 14)  /* Matrix scan line 1 */
#define KPC_MS0		(0x1 << 13)  /* Matrix scan line 0 */
#define KPC_ME		(0x1 << 12)  /* Matrix Keypad Enable */
#define KPC_MIE		(0x1 << 11)  /* Matrix Interrupt Enable */
#define KPC_DK_DEB_SEL	(0x1 <<	 9)  /* Direct Key Debounce select */
#define KPC_DI		(0x1 <<	 5)  /* Direct key interrupt bit */
#define KPC_DEE0	(0x1 <<	 2)  /* Rotary Encoder 0 Enable */
#define KPC_DE		(0x1 <<	 1)  /* Direct Keypad Enable */
#define KPC_DIE		(0x1 <<	 0)  /* Direct Keypad interrupt Enable */

#define KPDK_DKP	(0x1 << 31)
#define KPDK_DK7	(0x1 <<	 7)
#define KPDK_DK6	(0x1 <<	 6)
#define KPDK_DK5	(0x1 <<	 5)
#define KPDK_DK4	(0x1 <<	 4)
#define KPDK_DK3	(0x1 <<	 3)
#define KPDK_DK2	(0x1 <<	 2)
#define KPDK_DK1	(0x1 <<	 1)
#define KPDK_DK0	(0x1 <<	 0)

#define KPREC_OF1	(0x1 << 31)
#define kPREC_UF1	(0x1 << 30)
#define KPREC_OF0	(0x1 << 15)
#define KPREC_UF0	(0x1 << 14)

#define KPMK_MKP	(0x1 << 31)
#define KPAS_SO		(0x1 << 31)
#define KPASMKPx_SO	(0x1 << 31)

#define GPIO113_BIT	(1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
#define PSLR		__REG(0x40F00034)
#define PSTR		__REG(0x40F00038)  /* Power Manager Standby Configuration Reg */
#define PSNR		__REG(0x40F0003C)  /* Power Manager Sense Configuration Reg */
#define PVCR		__REG(0x40F00040)  /* Power Manager Voltage Change Control Reg */
#define PKWR		__REG(0x40F00050)  /* Power Manager KB Wake-Up Enable Reg */
#define PKSR		__REG(0x40F00054)  /* Power Manager KB Level-Detect Status Reg */
#define OSMR4		__REG(0x40A00080)  /* */
#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
#define OMCR4		__REG(0x40A000C0)  /* */

#endif	/* CONFIG_PXA27X */

#endif	/* _PXA_REGS_H_ */