| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788 |
- Atmel AT91 Evaluation kits
- http://atmel.com/dyn/products/tools.asp?family_id=605#1443
- ------------------------------------------------------------------------------
- AT91SAM9260EK & AT91SAM9XEEK
- ------------------------------------------------------------------------------
- Memory map
- 0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13)
- 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash
- Environment variables
- U-Boot environment variables can be stored at different places:
- - Dataflash on SPI chip select 1 (default)
- - Dataflash on SPI chip select 0 (dataflash card)
- - Nand flash.
- You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9260ek_config - use data flash (spi cs1) (default)
- make at91sam9260ek_nandflash_config - use nand flash
- make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0)
- make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1)
- ------------------------------------------------------------------------------
- AT91SAM9261EK
- ------------------------------------------------------------------------------
- Memory map
- 0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
- 0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22)
- Environment variables
- U-Boot environment variables can be stored at different places:
- - Dataflash on SPI chip select 0 (default)
- - Dataflash on SPI chip select 3 (dataflash card)
- - Nand flash.
- You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9261ek_config - use data flash (spi cs0) (default)
- make at91sam9261ek_nandflash_config - use nand flash
- make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0)
- make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3)
- ------------------------------------------------------------------------------
- AT91SAM9263EK
- ------------------------------------------------------------------------------
- Memory map
- 0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9)
- Environment variables
- U-Boot environment variables can be stored at different places:
- - Dataflash on SPI chip select 0 (dataflash card)
- - Nand flash.
- You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9263ek_config - use data flash (spi cs0) (default)
- make at91sam9263ek_nandflash_config - use nand flash
- make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
- ------------------------------------------------------------------------------
- AT91SAM9RLEK
- ------------------------------------------------------------------------------
- Memory map
- 0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
- Environment variables
- U-Boot environment variables can be stored at different places:
- - Dataflash on SPI chip select 0
- - Nand flash.
- You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9263ek_config - use data flash (spi cs0) (default)
- make at91sam9263ek_nandflash_config - use nand flash
- make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
|
