kwbimage.cfg 2.7 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182
  1. #
  2. # Copyright (C) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net>
  3. #
  4. # Based on netspace_v2 kwbimage.cfg:
  5. # Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
  6. #
  7. # Based on Kirkwood support:
  8. # (C) Copyright 2009
  9. # Marvell Semiconductor <www.marvell.com>
  10. # Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  11. #
  12. # See file CREDITS for list of people who contributed to this
  13. # project.
  14. #
  15. # This program is free software; you can redistribute it and/or
  16. # modify it under the terms of the GNU General Public License as
  17. # published by the Free Software Foundation; either version 2 of
  18. # the License, or (at your option) any later version.
  19. #
  20. # This program is distributed in the hope that it will be useful,
  21. # but WITHOUT ANY WARRANTY; without even the implied warranty of
  22. # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  23. # GNU General Public License for more details.
  24. #
  25. # Refer doc/README.kwbimage for more details about how-to configure
  26. # and create kirkwood boot image
  27. #
  28. # Boot Media configurations
  29. BOOT_FROM nand # Boot from NAND flash
  30. NAND_PAGE_SIZE 800
  31. # SOC registers configuration using bootrom header extension
  32. # Maximum KWBIMAGE_MAX_CONFIG configurations allowed
  33. # Values taken from image original LaCie U-Boot header dump!
  34. # Configure RGMII-0 interface pad voltage to 1.8V
  35. DATA 0xFFD100e0 0x1B1B1B9B
  36. #Dram initalization for SINGLE x16 CL=5 @ 400MHz
  37. DATA 0xFFD01400 0x43000c30 # DDR Configuration register
  38. DATA 0xFFD01404 0x37743000 # DDR Controller Control Low
  39. DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1)
  40. DATA 0xFFD0140C 0x00000A19 # DDR Timing (High)
  41. DATA 0xFFD01410 0x0000CCCC # DDR Address Control
  42. DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
  43. DATA 0xFFD01418 0x00000000 # DDR Operation
  44. DATA 0xFFD0141C 0x00000662 # DDR Mode
  45. DATA 0xFFD01420 0x00000004 # DDR Extended Mode
  46. DATA 0xFFD01424 0x0000F07F # DDR Controller Control High
  47. DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values)
  48. DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values)
  49. DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size
  50. DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0
  51. DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
  52. DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
  53. DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
  54. DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low)
  55. DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
  56. DATA 0xFFD0149C 0x0000E40F # CPU ODT Control
  57. DATA 0xFFD01480 0x00000001 # DDR Initialization Control
  58. DATA 0xFFD20134 0x66666666
  59. DATA 0xFFD20138 0x66666666
  60. DATA 0xFFD10000 0x01112222
  61. DATA 0xFFD1000C 0x00000000
  62. DATA 0xFFD10104 0x00000000
  63. DATA 0xFFD10100 0x40000000
  64. # End of Header extension
  65. DATA 0x0 0x0